Worldrigs ID: WR810

Generic Bucket Style Drilling Rig for Sale
Drilling Rig - Generic Bucket Style - For Sale

Model : Bucket Style Drill Rig
Manufacturer : Generic
Condition : Used

Description :

Bucket Style Drill Rig
Detroit Diesel Deck Engine
Mounted in a 1984 International 4370 Series truck
Tandem Axle
Cummins Diesel Truck Engine
Note: Bill of sale only (no-title) & Selling "as is, where-is".

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Used Generic Bucket Style Drilling Rig for Sale
Used Generic Drilling Rig for Sale
Generic Land Drilling Rig for Sale
Generic Bucket Style Used Drilling Rig for Sale
Generic Bucket Style Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR2978

Derex 1340-12X DR (Dual Rotary) Drilling Rig for Sale
Drilling Rig - Derex 1340-12X DR (Dual Rotary) - For Sale

Model : 1340-12X DR (Dual Rotary) Drill Rig
Manufacturer : Derex
Condition : New

Description :

Derex 1340-12X DR (Dual Rotary) Drill Rig
Truck
Acela Monterra 4×4
No Emission Controls
330HP Caterpillar 7.2L Turbo-Charged Diesel Engine
Full-Time All-Wheel Drive
Allison Automatic 7-Speed Transmission
U.S. Army “Ultra-Reliable” Certification
22″ Ground Clearance
Transfer Case
Namco (oilfield quality)
Safe Shift
Hydraulic System
Bosch Rexroth plus gear pump
Top Head
Variable torque and RPM with 2” thru-hole
0-125 rpm @ 3,500-lbf
Lower drive
Variable torque and RPM with 10” thru-hole
0-23 rpm @ 20,000-lbf
Diverter
Simple seal design with 4” NPT discharge
to control cuttings.
Derrick & Feed System
13ft top head stroke (handles 10ft x 3" OD drill pipe)
40,000-lbs pullback
20,000-lbs pulldown
100 FPM
Derrick slide/ dump
4ft Derrick slide for angles up to 45°
Main Winch
Manual jib
2,500 lb.
Remote on helpers side for winch
Control Panel
Straight hydraulic controls (no electrics to fail)
Marine grade electric switches (for lights)
Murphy engine monitor display
Twin platforms
Leveling Jacks
Four 36” stroke independently controlled
Night Lights
6 LED night lights
Toolboxes
30”x 18” x 18”
Overall Dimensions
Length: 24ft 11”
Width: 8ft 6”
Derrick up height: 24ft 6” – 28ft 6” with Derrick slide
Derrick down height: 11ft
Water Injection
9-GPM FMC injection pump
Gross Weight
28,000lbs - 30,000lbs
Casing
Diameter 4", 5" & 6" (with 8" & 10" option for surface casing)
Pre-Order Drill from EWDAdditional Options
4 – 6 Month Leadtime from Date Ordered
Sand Line Winch
1,500ft sand line
Mud Pump
3x2x13 centrifugal 300 gpm/300 psi
Centerline piston 150 gpm/600 psi
Line Oiler
Many oilers available
Water InjectionDrill Pipe Packages
18 gpm FMC injection pump
Wire Feeder and Box
Hydraulic or Gas Welders

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
New Derex 1340-12X DR (Dual Rotary) Drilling Rig for Sale
Derex 1340-12X DR Drilling Rig for Sale
New Derex 1340-12X DR Drilling Rig for Sale
Derex 1340-12X DR Land Drilling Rig for Sale
Derex 1340-12X DR (Dual Rotary) Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR2976

Brand New Massenza Hydraulic Drilling Rig Model Mi8 for Sale
Massenza Hydraulic Drilling Rig for Sale

Description :

Used for water well research, geological findings, mineral research and
geothermal applications.

Work Methods:
Rotary drilling with direct circulation by Water, Mud, Air or Foam
Down the Hole Hammer Drilling
Auger Drilling
Core Drilling

Main Framework:
Made out of electrically welded high quality steel structural members
and tubular pieces.
N°4 hydraulic stabilizers of which two are fixed and the other two
can be manually widened for the leveling and positioning of rig,
complete with check valve and support plate.
Stabilizers dimensions 3 3/4" x 3 5/32" x 2 3/8", stroke 1 ft 3 3/4",
lifting force 26,566 lbs each.
Pre-arrangement for drill pipe box.

Control Panel Fixed:
Unified type, complete with valves, distributors, pressure gauges, diesel
engine and rig control instrumentation and controls for rig positioning.


Crawler Undercarriage:
Tracked crawler unit complete with hydraulic circuit of translation and
controls on the portable unit.
Steel tracks width 11 13/16"
Total width 5 ft 5 15/16"
Length 8 ft 4 9/16"
Traction force 15076 lbf
Speed 0.74 m/h (1.2 km/h)

Maximum Drilling Depth with mud pumps is : 260 mts (850 ft).

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Drilling Rig - Massenza Hydraulic - For Sale
New Massenza Hydraulic Crawler Drilling Rig for Sale
Massenza Hydraulic Drilling Rig Model Mi8 Mounted On Tracks for Sale
Brand New Massenza Hydraulic Drilling Rig for Sale
Massenza Hydraulic Crawler Drilling Rig Model Mi8 for Sale
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR2977

Brand New Massenza Hydraulic Drilling Rig Model Mi5 for Sale
Drilling Rig - Massenza Hydraulic - For Sale

Description :

Used for water well research, geological findings, mineral research
and geothermal applications.

Work Methods:
Rotary drilling with direct circulation by Water, Mud, Air or Foam
Down the Hole Hammer Drilling
Auger Drilling
Core Drilling

Main Framework:
Made out of electrically welded high quality steel S 355 JR.
N°4 hydraulic stabilizers of which two are fixed and the other
two can be manually widened for the levelling and positioning
of rig, complete with check valve.

Control Panel:
Fixed control panel, complete with valves, distributors, pressure
gauges, reading gauges for pull-up, pressure thrust on drill battery,
balancing system, diesel engine control.

Diesel Fuel Tank: capacity 30,4 US Gallon.

Maximum Drilling Depth with mud pumps is : 210 mts (690 ft).

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
New Massenza Hydraulic Drilling Rig for Sale
Massenza Hydraulic Drilling Rig Model Mi5 Mounted On Tracks for Sale
Brand New Massenza Hydraulic Drilling Rig Mounted On Tracks for Sale
New Massenza Hydraulic Crawler Drilling Rig for Sale
Brand New Massenza Hydraulic Crawler Drilling Rig Model Mi5 for Sale
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR2975

Derex 1340-14 DR (Dual Rotary) Drilling Rig for Sale
Drilling Rig - Derex 1340-14 DR - For Sale

Model : 1340-14 DR (Dual Rotary) Drill Rig
Manufacturer : Derex
Condition : New

Description :

Derex 1340-14 DR (Dual Rotary) Drill Rig
Truck
Peterbilt 567
Paccar 11 Litre
Allison 6 speed automatic
Air ride
Transfer Case
Namco (oilfield quality)
Safe Shift
Hydraulic System
Bosch Rexroth plus gear pump
Top Head
Variable torque and RPM with 2” thru-hole
0-125 rpm @ 3,500-lbf
Lower drive
Variable torque and RPM with 10” thru-hole
0-23 rpm @ 20,000-lbf
Diverter
Simple seal design with 4” NPT discharge
to control cuttings.
Derrick & Feed System
13ft top head stroke (handles 10ft x 3" OD drill pipe)
40,000-lbs pullback
20,000-lbs pulldown
100 FPM
Derrick slide/ dump
4ft Derrick slide for angles up to 45°
Main Winch
Manual jib
2,500 lb.
Remote on helpers side for winch
Control Panel
Straight hydraulic controls (no electrics to fail)
Marine grade electric switches (for lights)
Murphy engine monitor display
Twin platforms
Leveling Jacks
Four 36” stroke independently controlled
Night Lights
6 LED night lights
Toolboxes
30”x 18” x 18”
Overall Dimensions
Length: 24ft 11”
Width: 8ft 6”
Derrick up height: 24ft 6” – 28ft 6” with Derrick slide
Derrick down height: 11ft
Water Injection
9 gpm FMC injection pump
Gross Weight
34,000lbs - 36,000lbs
Casing
Diameter 4", 5" & 6" (with 8" & 10" option for surface casing)
Pre-Order Drill from EWDAdditional Options
4 – 6 Month Leadtime from Date Ordered
Sand Line Winch
1,500ft sand line
Mud Pump
3x2x13 centrifugal 300 gpm/300 psi
Centerline piston 150 gpm/600 psi
Air Compressor Options
Vanair / Sullair 600cfm / 250psi @ 1,800rpm
Vanair / Sullair 733cfm / 150psi @ 2,200 rpm
Line Oiler
Many oilers available
Water InjectionDrill Pipe Packages
18 gpm FMC injection pump
Wire Feeder and Box
Hydraulic or Gas Welders

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
New Derex 1340-14 DR (Dual Rotary) Drilling Rig for Sale
Derex 1340-14 DR Drilling Rig for Sale
New Derex 1340-14 DR Drilling Rig for Sale
Derex Land Drilling Rig for Sale
Derex 1340-14 DR (Dual Rotary) Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR2974

Derex 1340-14X DR (Dual Rotary) Drilling Rig for Sale
Drilling Rig - Derex 1340-14X DR - For Sale

Model : 1340-14X DR (Dual Rotary) Drill Rig
Manufacturer : Derex
Condition : New

Description :

Derex 1340-14X DR (Dual Rotary) Drill Rig
Truck
Acela Monterra 6×6
No Emission Controls
330HP Caterpillar 7.2L Turbo-Charged Diesel Engine
Full-Time All-Wheel Drive
Allison Automatic 7-Speed Transmission
U.S. Army “Ultra-Reliable” Certification
22″ Ground Clearance
Deck Motor
Cummins 6.7 litre 300 HP tier 4
Hydraulic System
Bosch Rexroth plus gear pump
Top Head
Variable torque and RPM with 2” thru-hole
0-125 rpm @ 3,500-lbf
Lower drive
Variable torque and RPM with 10” thru-hole
0-23 rpm @ 20,000-lbf
Diverter
Simple seal design with 4” NPT discharge
to control cuttings.
Derrick & Feed System
13ft top head stroke (handles 10ft x 3" OD drill pipe)
40,000-lbs pullback
20,000-lbs pulldown
100 FPM
Derrick slide/ dump
4ft Derrick slide for angles up to 45°
Main Winch
Manual jib
2,500 lb.
Remote on helpers side for winch
Control Panel
Straight hydraulic controls (no electrics to fail)
Marine grade electric switches (for lights)
Murphy engine monitor display
Twin platforms
Leveling Jacks
Four 36” stroke independently controlled
Night Lights
6 LED night lights
Toolboxes
30”x 18” x 18”
Overall Dimensions
Length: 24ft 11”
Width: 8ft 6”
Derrick up height: 24ft 6” – 28ft 6” with Derrick slide
Derrick down height: 11ft
Water Injection
9 gpm FMC injection pump
Gross Weight
28,000lbs - 30,000lbs
Casing
Diameter 4", 5" & 6" (with 8" & 10" option for surface casing)
Pre-Order Drill from EWDAdditional Options
4 – 6 Month Leadtime from Date Ordered
Sand Line Winch
1,500ft sand line
Mud Pump
3x2x13 centrifugal 300 gpm/300 psi
Centerline piston 150 gpm/600 psi
Air Compressor Options
Vanair / Sullair 600cfm / 250psi @ 1,800rpm
Vanair / Sullair 733cfm / 150psi @ 2,200 rpm
Line Oiler
Many oilers available
Water InjectionDrill Pipe Packages
18 gpm FMC injection pump
Wire Feeder and Box
Hydraulic or Gas Welders

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
New Derex 1340-14X DR (Dual Rotary) Drilling Rig for Sale
New Derex 1340-14X DR Drilling Rig for Sale
Derex 1340-14X DR Drilling Rig for Sale
New Derex Land Drilling Rig for Sale
Derex 1340-14X DR (Dual Rotary) Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR2973

Ardco K10 4X4 Drilling Rig for Sale
Ardco K10 4X4 Drilling Rig - 1974 Built for Sale

Model : K10 4X4 Drill Rig
Manufacturer : Ardco
Year : 1974
Condition : Used

Description :

1974 Ardco K10 4X4 Drill Rig
4X4 Carrier S/N: K420
Detroit 4-53T diesel engine (locked up does not run)
Eaton FS5005A 5 speed transmission
Winch on front
Drill is a predecessor to the C1000
Gear water/ grout pump
Large water tank
23.1-26 tires
Ardco top drive
Draw works is chain and sprocket drive hydraulic motor

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Drilling Rig - Ardco K10 4X4 - For Sale
1974 Built Ardco K10 4X4 Drilling Rig for Sale
Used Ardco K10 4X4 Drilling Rig for Sale
Ardco K10 4X4 Used Land Drilling Rig for Sale
Ardco K10 4X4 Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR2972

Derex 1340-16 DR (Dual Rotary) Drilling Rig for Sale
Drilling Rig - Derex 1340-16 DR - For Sale

Model : 1340-16 DR (Dual Rotary) Drill Rig
Manufacturer : Derex
Condition : Used

Description :

Derex 1340-16 DR (Dual Rotary) Drill Rig
Truck
Peterbilt 520
Paccar 13 Litre.
Allison 6 speed automatic
Air ride
Transfer Case
Namco (oilfield quality)
Safe Shift
Hydraulic System
Bosch Rexroth plus gear pump
Top Head
Variable torque and RPM with 2” thru-hole
0-125 rpm @ 3,500-lbf
Lower drive
Variable torque and RPM with 10” thru-hole
0-23 rpm @ 20,000-lbf
Diverter
Simple seal design with 4” NPT discharge
to control cuttings.
Derrick & Feed System
13ft top head stroke (handles 10ft x 3" OD drill pipe)
40,000-lbs pullback
20,000-lbs pulldown
100 FPM
Derrick slide/ dump
4ft Derrick slide for angles up to 45°
Main Winch
Manual jib
2,500 lb.
Remote on helpers side for winch
Control Panel
Straight hydraulic controls (no electrics to fail)
Marine grade electric switches (for lights)
Murphy engine monitor display
Twin platforms
Leveling Jacks
Four 36” stroke independently controlled
Night Lights
6 LED night lights
Toolboxes
30”x 18” x 18”
Overall Dimensions
Length: 24ft 11”
Width: 8ft 6”
Derrick up height: 24ft 6” – 28ft 6” with Derrick slide
Derrick down height: 11ft
Water Injection
9-GPM FMC injection pump
Gross Weight
36,000lbs - 38,000lbs
Casing
Diameter 4", 5" & 6" (with 8" & 10" option for surface casing)
Pre-Order Drill from EWDAdditional Options
4 – 6 Month Leadtime from Date Ordered
Sand Line Winch
1,500ft sand line
Mud Pump
3x2x13 centrifugal 300 gpm/300 psi
Centerline piston 150 gpm/600 psi
Air Compressor
Vanair / Sullair 900cfm / 350psi
Line Oiler
Many oilers available
Water InjectionDrill Pipe Packages
18 gpm FMC injection pump
Wire Feeder and Box
Hydraulic or Gas Welders

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Used Derex 1340-16 DR (Dual Rotary) Drilling Rig for Sale
Derex 1340-16 DR Used Drilling Rig for Sale
Derex Drilling Rig for Sale
Derex 1340-16 DR Drilling Rig for Sale
Derex 1340-16 DR (Dual Rotary) Drilling Rig for Sale in USA
--------------------------------------------------------------------------------------------------------------------------

Worldrigs ID: WR2971

Derex 2630-22 Arthur Drilling Rig for Sale
Drilling Rig - Derex 2630-22 Arthur for Sale

Model : 2630-22 Arthur (Air/Rotary/Top/Head) Drill Rig
Manufacturer : Derex
Condition : Used

Description :

Derex 2630-22 Arthur (Air – Rotary – Top – Head) Drill Rig
Truck
Peterbilt 567
Paccar 13 Litre.
Allison 6 speed automatic
Air ride
Transfer Case
Namco (oilfield quality)
Safe Shift
Hydraulic System
Sundstrand, Bosch Rexroth plus gear pump
Top Head
Variable torque and RPM with 2” thru-hole
0-160 rpm @ 8,000-lbf torque
Derrick & Feed System
26ft top head stroke
30,000-70,000 lbs pullback
20,000-lbs pulldown
120 FPM
Air Compressor
Vanair/ Sullair 750 cfm / 350 psi @ 1,800 rpm and
1050 cfm / 350 psi @ 2,200 rpm
Main Winch
12,000 lbs
Hydraulic 135° jib
2,500 lbs
Remote on helpers side for winch
Control Panel
Straight hydraulic controls (no electrics to fail)
Marine grade electric switches (for lights)
Murphy engine monitor display
Twin platforms
Leveling Jacks
Four 36” stroke independently controlled
Night Lights
6 LED night lights
Toolboxes
30”x 18” x 18”
Overall Dimensions
Length: 38ft
Width: 8ft 6”
Derrick up height: 42ft
Derrick down height: 13ft 4”
Water Injection
9-GPM FMC injection pump
Gross Weight
44,000lbs - 46,000lbs
Pre-Order Drill from EWDAdditional Options
4 – 6 Month Leadtime from Date Ordered
Sand Line Winch
1,500ft sand line
Mud Pump
3x2x13 centrifugal 300 gpm/300 psi
Centerline piston 150 gpm/600 psi
Line Oiler
Many oilers available
Water InjectionOffsyder Rod Handling System
18 gpm FMC injection pump
Drill Pipe Packages
Wire Feeder and Box
Hydraulic or Gas Welders

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Used Derex 2630-22 Arthur Drilling Rig for Sale
Derex 2630-22 Arthur Used Drilling Rig for Sale
Derex Arthur Drilling Rig for Sale
Derex Used Land Drilling Rig for Sale
Derex 2630-22 Arthur Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR2970

Derex 2630-22 MATH Drilling Rig for Sale
Drilling Rig - Derex 2630-22 MATH - For Sale

Model : 2630-22 MATH (Mud/Air/Top/Head) Drill Rig
Manufacturer : Derex
Condition : Used

Description :

Derex 2630-22 MATH (Mud – Air – Top – Head) Drill Rig
Truck
Peterbilt 567
Paccar 13 Litre.
Allison 6 speed automatic
Air ride
Transfer Case
Namco (oilfield quality)
Safe Shift
Hydraulic System
Sundstrand, Bosch Rexroth plus gear pump
Top Head
Variable torque and RPM with 2” thru-hole
0-160 rpm @ 8,000-lbf torque
Derrick & Feed System
26ft top head stroke
30,000-70,000 lbs pullback
20,000-lbs pulldown
120 FPM
Main Winch
12,000 lbs
Hydraulic 135° jib
Remote on helpers side for winch
Control Panel
Straight hydraulic controls (no electrics to fail)
Marine grade electric switches (for lights)
Murphy engine monitor display
Twin platforms
Leveling Jacks
Four 36” stroke independently controlled
Night Lights
6 LED night lights
Toolboxes
30”x 18” x 18”
Overall Dimensions
Length: 38”
Width: 8ft 6”
Derrick up height: 42ft
Derrick down height: 13ft 4”
Water Injection
9-GPM FMC injection pump
Gross Weight
44,000lbs - 46,000lbs
Pre-Order Drill from EWDAdditional Options
4 – 6 Month Leadtime from Date Ordered
Sand Line Winch
1,500ft sand line
Mud Pump
3x2x13 centrifugal 300 gpm/300 psi
Centerline piston 150 gpm/600 psi
Line Oiler
Many oilers available
Water InjectionOffsyder Rod Handling System
18 gpm FMC injection pump
Drill Pipe Packages
Wire Feeder and Box
Hydraulic or Gas Welders

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Used Derex 2630-22 MATH Drilling Rig For Sale
Derex 2630-22 MATH Used Drilling Rig For Sale
Derex Land Drilling Rig For Sale
Used Derex Land Drilling Rig For Sale in USA
Derex 2630-22 MATH Drilling Rig For Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR757

Schramm T450M Drilling Rig for Sale
Schramm T450M Drilling Rig - 2005 Built - For Sale

Model : T450M Drill Rig
Manufacturer : Schramm
Year : 2005
Condition : Used

Description :

2005 Schramm T450M Drill Rig
Note: Set up for core drilling
Mounted to a 2006 AWD International Truck
10-speed transmission
300 HP DT466 with 7400 miles
Sullair 300 cfm / 200 psi air compressor (locked up)
5 x 6 Gardner Denver mud pump
Moyno pump
Centrifugal pump
Winch
Sand line
UDR KL400
Sandvik hands-free table
Have table bushings and breakout fork for normal rod
Rod loader
Rig was used for core drilling but no core barrels included

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
2005 Built Schramm T450M Drilling Rig for Sale
Drilling Rig - Schramm T450M - For Sale
Used Schramm T450M Drilling Rig for Sale
Schramm Used Land Drilling Rig for Sale
Schramm T450M Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR2631

Chicago Pneumatic 670 Drilling Rig for Sale
1976 Built Chicago Pneumatic 670 Drilling Rig for Sale

Model : 670 Drill Rig
Manufacturer : Chicago Pneumatic
Year : 1976
Condition : Used

Description :

1976 Chicago Pneumatic 670 Drill Rig
CAT 3406 Diesel Deck Engine
800 cfm / 200 psi Screw type Air Compressor
Mounted on a 1976 GMC 7500 Truck
Detroit V6 Diesel Engine
Note: Tower is Broken & Jack Cylinders Need Rebuilt

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Drilling Rig - Chicago Pneumatic 670 - For Sale
Chicago Pneumatic 670 Drilling Rig - 1976 Built for Sale
Used Chicago Pneumatic 670 Drilling Rig for Sale
Chicago Pneumatic Used Land Drilling Rig for Sale
Chicago Pneumatic 670 Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR1387

Ingersoll-Rand TH55 Drilling Rig for Sale
Drilling Rig - Ingersoll-Rand TH55 - For Sale

Model : TH55 Drill Rig
Manufacturer : Ingersoll-Rand
Year : 1979
Condition : Used

Description :

1979 Ingersoll-Rand TH55 Drill Rig
Water Well / Geothermal Drill Rig
50SDS (piston) Air Compressor (approximately 200 CFM)
3x4 centrifugal mud pump
Mounted on a International Truck
DT466 diesel engine with roadranger transmission
and passenger side fender flare missing), but engine runs
Drill will need new kelly hose, some hydraulic hoses and likely some other
things but dont currently have detailed condition report available
Comes with 300 ft. of drill pipie (20 ft lengths x 3-1/2” OD x
2-3/8 ft IF threads) 3-1/2” OD x 2-3/8” IF), also comes with a
couple stabilizers, suction hose, etc

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
1979 Built Ingersoll-Rand TH55 Drilling Rig for Sale
Ingersoll-Rand TH55 Drilling Rig - 1979 Built for Sale
Used Ingersoll-Rand TH55 Drilling Rig for Sale
Used Ingersoll-Rand Land Drilling Rig for Sale
Ingersoll-Rand TH55 Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR760

Driltech D40K Drilling Rig for Sale
Drilling Rig - Driltech D40K - For Sale

Model : D40K Drill Rig
Manufacturer : Driltech
Year : 1993
Condition : Used

Description :

1993 Driltech D40K Drill Rig
Caterpillar 3408 diesel deck engine
Sullair 1000 cfm / 350 psi Air Compressor (valve issues)
50,000 lbs of pullback
Water Injection Pump 4 cylinder
Hammer Lubricator
1000 ft of 4-1/2" x 25 ft of used drill pipe included
8" hammer, petol wrench, control cover, & sling for rods included
Mounted on Mack Truck
Rated 300 HP with Jake Brakes
All new tires installed late 2023

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
1993 Built Driltech D40K Drilling Rig for Sale
Driltech D40K Drilling Rig - 1993 Built for Sale
Used Driltech D40K Drilling Rig for Sale
Driltech D40K Used Land Drilling Rig for Sale
Driltech D40K Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR644

Driltech D35K Drilling Rig for Sale
Drilling Rig - Driltech D35K - For Sale

Model : D35K Drill Rig
Manufacturer : Driltech
Year : 1991
Condition : Used

Description :

1991 Driltech D35K Drill Rig
850 CFM / 350 PSI Air Compressor
Caterpillar 3406 diesel deck engine (has issues as machine has been parked for 5
years)
35,000 lbs of pullback
22" table opening
Included 23 pieces of 20ft x 4-1/2" OD drill pipe.
Mounted on a Ford L8000 truck
diesel engine

Location : Western Europe

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Driltech D35K Drilling Rig - 1991 Built for Sale
1991 Built Driltech D35K Drilling Rig for Sale
Used Driltech D35K Drilling Rig for Sale
Driltech Used Drilling Rig for Sale
Driltech D35K Drilling Rig for Sale in Western Europe
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR1206

Sandvik T1000 BH Drilling Rig - For Sale
Drilling Rig - Sandvik T1000 BH - For Sale

Model : T1000 BH Drill Rig
Manufacturer : Sandvik
Year : 2006
Condition : Used

Description :

2006 Sandvik / Driltech T1000 Drill Rig - S/N: 732989
BH (Blasthole drilling)
CAT C15 Diesel Deck Engine - (3300 hours since rebuilt)
Sullair 1000 cfm / 350 psi Air Compresser - (5,000 hours since rebuilt)
Carousel (handles 4-1/2" drill pipe)
2 Piston Water injection pump
1 Rod Winch
Hammer Oilier
Hydraulic Leveling Jacks
Mounted on a Sterling Truck
Mercedes Benz Diesel Engine
8LL Transmission
Paint Job in 2016
Very Good Tires
37ft L x 8ft 6" W x 13ft 2" H & estimated 54,000 LBS weight

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Sandvik T1000 BH Drilling Rig - 2006 Built for Sale
2006 Built Sandvik T1000 BH Drilling Rig for Sale
Used Sandvik T1000 BH Drilling Rig for Sale
Sandvik T1000 BH Used Drilling Rig for Sale
Sandvik T1000 BH Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR183

Speedstar 1500 Drilling Rig for Sale
Drilling Rig - Speedstar 1500 - For Sale

Model : 1500 Drill Rig
Manufacturer : Speedstar
Year : 1976
Condition : Used

Description :

1976 Speedstar 1500 Drill Rig
with 22 Draw works
Combo Air/Mud
Top Head Drive Drilling Rig
Mounted on a 1976 Ford 9000 (5 Ton) Truck - (Serial # U91VVC16817)
Cummins Diesel Engine & 5" X 6°
Gardner Denver Mud Pump
500 CFM X 250# Air Compressor Truck Mounted - (J. L. Beeman)
With the following Auxiliary Equipment:
100 Ft. 3-1/2" Air Drill Collars -- (Rex McFadden Ltd./Atlas machine)
Shop Made Subs & Collars - (Owens Machine)
10 Stabilizer - (Rex McFadden/ Atlas Machine)
900 FL 3" (Range 1) Air Drill Pipe - (J. L. Beeman)
5-1/2" Rock Hound Air Hammer with High Pressure &
Low Pressure Piston/ 6-1/2" Bit - (Rock Hound)
Lil Darlin Blow Out Preventer - (Mauldin Sales)
Single Axle Shop Made 10° Trailer with Dog House
with Junk Basket - (Mauldin Sales)
Single Axle Shop Made 12° Trailer Mud House - (Mauldin Sales)
1965 Model Shop Made 3 X 7,000# Axles X 20ft Drill Pipe
Trailer VIN # TRI48964 - (Sojourher Drilling)

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
1976 Built Speedstar 1500 Drilling Rig for Sale
Speedstar 1500 Drilling Rig - 1976 Built for Sale
Used Speedstar 1500 Drilling Rig for Sale
1976 Built Speedstar Land Drilling Rig for Sale
Speedstar 1500 Drilling Rig for Sale in USA
---------------------------------------------------------------------------------------------------------

Worldrigs ID: WR1393

Failing 1500 Holemaster Drilling Rig for Sale
Drilling Rig - Failing 1500 Holemaster - For Sale

Model : 1500 Holemaster Drill Rig
Manufacturer : Failing
Condition : Used

Description :

Failing 1500 Holemaster Drill Rig
Table Drive Rotary
Kelly Bar
Draw works
Mounted on a GMC Truck 6x6
PTO Drive from Truck Engine
Hydraulic Operators Controls
Failing FM-45 Duplex Mud Pump
FMC (Bean) Water Injection Pump
Moyno Water Pump
Hydraulic Leveling Jacks

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Used Failing 1500 Holemaster Drilling Rig for Sale
Failing 1500 Holemaster Used Drilling Rig for Sale
Failing 1500 Drilling Rig for Sale
Failing 1500 Used Land Drilling Rig for Sale
Failing 1500 Holemaster Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR79

Schramm T64HB Drilling Rig for Sale
Drilling Rig - Schramm T64HB - For Sale

Model : T64HB Drill Rig
Manufacturer : Schramm
Condition : Used

Description :

Schramm T64HB Drill Rig
GHH 750 cfm / 300 psi Air Compressor (recently overhauled)
Detroit 8V92 Diesel Deck Engine
Mounted on a Ford Truck
Diesel Engine
Notes : Top head is good hydraulic motors overhauled in 2022
Overall fair working condition

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Used Schramm T64HB Drilling Rig for Sale
Schramm Used Drilling Rig for Sale
Schramm T64HB Used Drilling Rig for Sale
Schramm T64HB Land Drilling Rig for Sale
Schramm T64HB Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR995

Altas Copco TH60 Drilling Rig for Sale
Altas Copco TH60 Drilling Rig - 2018 Built - For Sale

Model : TH60 Drill Rig
Manufacturer : Epiroc (Atlas Copco)
Year : 2018
Condition : Used

Description :

2018 Epiroc / Altas Copco TH60 Drill Rig
DH 70,000 lbs of pullback
Mounted on a Peterbilt Truck 367 Truck
Cummins X15 Diesel Engine - rated 600 HP 2017 Emissions Engine
22,000Lb. Front Axles
46,000Lb. HMXRear Axles
Driver Controlled DiffLocks Both Axles
Fuller 18918B Transmission / Namco Transfer Case
IR 1070 CFM / 350 PSI Air Compressor
36 Foot Derick
8,000Ft-Ibs @105RPM
Two Speed Rotary Head 5500 Ft-Ibs @ 145 RPM
4-1/2" X 2-7/8" FI Spindle With 6 Pipe Carousel & Max Casing size 19"
Standard- 3" - 350 PSI Ari Piping,
25 GPM BEAN Water Injection Without Foam
30,000 lb Drawworks - Bare Drum Pull 160 fpm
1000 ft of 5/16" Sandreel Line
Single Rod Loader
Off Board Mud Package with Hydraulic driven Mud Pump (DUPLEX CENTERLINE
MOC NO CLM-7.5" X 10" DSPA - rated 300 GPM @ 400PSI, 100HP) included
Dual JIB Controls
7 Gallon Electric DHD Lubricator

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
2018 Built Altas Copco TH60 Drilling Rig for Sale
Used Altas Copco TH60 Drilling Rig for Sale
Drilling Rig - Altas Copco TH60 for Sale
Altas Copco TH60 Used Land Drilling Rig for Sale
Altas Copco TH60 Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR1029

Ingersoll-Rand T3W Drilling Rig for Sale
Drilling Rig - Ingersoll-Rand T3W - For Sale

Model : T3W Drill Rig
Manufacturer : Ingersoll-Rand
Year : 1992
Condition : Used

Description :

1992 Ingersoll-Rand T3W Drill Rig
Cummins 855 Diesel Deck Engine
IR 825cfm/350psi Air Compressor
Myers Water Injection Pump
Hammer Lubricator
Modine Compressor
Hydraulic Cooler
No Drill Pipe & Setup for 4-1/2"
Hydraulic Leveling Jacks
Mounted on a Ford L8000 Truck
Brazilian Ford Engine

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
1992 Built Used Drilling Rig for Sale
Ingersoll-Rand T3W Drilling Rig - 1992 Built for Sale
1992 Built Ingersoll-Rand T3W Drilling Rig for Sale
Ingersoll-Rand T3W Drilling Rig for Sale in USA
Ingersoll-Rand Used Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR622

VFD Land Drilling Rig for Sale
Chinese 2000HP Land Rig
Land Rig Builders (China) - 2000hp

General description :
Rig type : ZJ70 rig
Rig rated dept : 6000m (127mm DP) ~7000 (114mm DP)
Traveling system : 6 x 7 (sheaves), parallel
Available height of derrick : 150 ft
Rig floor dimension / height of drilling floor : 42ft x 40ft / 30ft
Opening diameter of rotary table : 952.5mm (37 1/2 inch)
Rated input power of drawworks : 2680 hp or 2000kW
Capacity of mud pump : 3 x 1600 hp
Power transfer type : AC-VFD-AC

Drilling equipment :
Mast :
Model : JJ450/45-K11 :
Type II consist of five sections, 150 ft clear height
Top span (front x side) 2.2 m x 2.2 m
Bottom span (front x side) 9 m x 2.7 m
Max hook load 450t or 1,210,000 lbs

Drawworks :
2680 hp or 2000 kW
Driven by two AC VF motor
Max pull fast line : 485 kn (110,000 lbs)
Wire rope : F38mm
Air cool hydraulic disc brake : PS80

Crown block :
Model : TC450-7
Max hook load : 4500 kn (450t)
OD of sheave : 1524 mm
Diameter of drilling line : F38mm
No of sheaves : 7
No of sand line sheave : 1
Diameter of sand line : F14.5mm

Traveling block :
Model : YC450
Max static load : 4500 kn (450t)
OD of sheave : 1524mm
No of sheave : 6

Rotary table :
Model : ZP375
Table opening diameter : 37 1/2"
Max static load : 5850 kn
Max speed : 300 rpm
Rate power : 600 volt
Gear ratio : 3.56

Top drive :
Model : NOV/TDS-11SA/Electrical/800 hp
Hoisting capacity : 500 t
Output torque continuous : 37,500 ft-lbs (800hp)
Tool torque (intermittent @ stall) : 55,000 ft-lbs
Max speed : 228 rpm
Drilling motor : AC 575 VAC (2 x 400 hp)
Make up torque : 47,000 ft-lbs
Break out torque : 55,000 ft-lbs

Mud pumps :
Model : HHF-1600
Input power : 1600 hp (1176 kW)
Max cylinder diameter : 7" or F180mm
Length of stroke : 12" or 305mm
Rate no. of stroke : 120 spm
Three triplex single acting piston, HHF-1600

Solid control :
Shale shaker : Derrick FLC-503/rated 60L/s
Desander : DSV-10-3/rated 1280 gpm
Desilter : S-416-S/rated 1280 gpm
Mud cleaner : Derrick FLC-503-3P

Mud tank :
2,500 bbls

Generator :
Type : SR4B
No. of gen. : 04 set (01 back up)
Capacity : 1750 kva
Rate voltage : 600 vac

AC distribution / transformer :
ABB/AC S800
Transformer SUNTEN/ SC B9-1600, 600 vac/380 vac

Emergency generator : 1 set CAT C15
Diesel : 4 set CAT3512B

BOP stack :
21 1/4" BOP 2,000 wp including :
01 annular 5,000 wp
01 double ram 2,000 wp
13 5/8" BOP 10,000 wp including :
01 annular 5,000 wp
01 double ram 10,000 wp
01 single ram 10,000 wp
Comply with lifting BOP swl : 2 x 25 ton

Warranty :
Guarantee period shall last for 18 months counting from the delivery date
or 12 months from the commencement of operation at the well site,
which expiration date comes earlier/

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------------------------------------------
Search words(for official use only) - 
VFD Land Drilling Rig for Sale
2000hp Land Drilling Rig From China
Chinese Rig Builders
Chinese 2000hp Land Rig Builders
New 2000hp Chinese Rig
2000hp VFD Land Rig
2000hp new Land Rig From China
New 2000hp Chinese Drilling Rig
-------------------------------------------------------------------------------------------------------------------------------

Worldrigs ID: WR1417

CME 55 Drilling Rig for Sale
Drilling Rig - CME 55 - For Sale

Model : 55 Drill Rig
Manufacturer : CME Drill
Year : 1978
Condition : Used

Description :

CME 55 Drill Rig - Serial Number: 130085
Moyno-type Water Pump
Cathead
Winch
Auto Hammer Driver installed by CME
Ford Gas Deck Engine
Hydraulic operator controls
Hydraulic Leveling Jacks
Mounted on single-axle 1978 International 1600 truck - VIN: D0512HHB33188
Gas engine
manual transmission

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
1978 Built CME 55 Drilling Rig for Sale
Used CME 55 Drilling Rig for Sale
CME 55 Drilling Rig - 1978 Built for Sale
1978 Built CME 55 Used Drilling Rig for Sale
CME 55 Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR998

CME 55 Drilling Rig for Sale
CME 55 Drilling Rig - 1998 Built for Sale

Model : 55 Drill Rig
Manufacturer : CME Drill
Year : 1998
Condition : Used

Description :

1998 CME 55 Drill Rig - Serial: 287885
Length : 14ft / Width : 96" / Mast height : 30ft
Moyno Pump
Safety hammer
Cat Head
Slide base and wiggle tail
Cummins B3.9c 110 HP 4 Cylinder 3.9L Diesel Engine - Serial: 45680855
Hours : 12,632
Poly tank
Capacity : 940L
Mounted on a 1998 GMC C7500 Truck - VIN: 1GDM7H1C2WJ515925
Miles : 289,463 on odometer
Caterpillar 3126 Diesel 6 Cylinder 7.2L Diesel Engine
Eaton Fuller Manual 9 Speed Transmission
Suspension : Spring
Brakes : Air
GVWR : 33,000 lbs
Wheelbase : 190"
AC, Heat
Front : 11R22.5, Rear Duals, Ironman Tires

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Drilling Rig - CME 55 - For Sale
1998 Built CME 55 Drilling Rig for Sale
Used CME 55 Drilling Rig for Sale
CME 55 Drilling Rig for Sale in USA
CME 55 Land Drilling Rig for Sale
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR764

Ingersoll-Rand T4W Drilling Rig - For Sale
Drilling Rig - Ingersoll-Rand T4W - For Sale

Model : T4W
Manufacturer : Ingersoll-Rand
Year : 1982
Condition : Used

Description :

1982 Ingersoll-Rand T4W Drill Rig
IR 900 CFM / 350 PSI Air Compressor
Detroit 12V71 diesel deck engine
Spur Gear top head (single motor)
8 pieces drill pipe (25ft x 4-1/2")
Working order

Location : Western Asia

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
1982 Built Ingersoll-Rand T4W Drilling Rig for Sale
Ingersoll-Rand T4W Drilling Rig - 1982 Built - For Sale
Used Ingersoll-Rand T4W Drilling Rig for Sale
Ingersoll-Rand T4W Land Drilling Rig for Sale
Ingersoll-Rand Drilling Rig for Sale
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR1479

Schramm T64HB Drilling Rig for Sale
Drilling Rig - Schramm T64HB - For Sale

Model : T64HB Drill Rig
Manufacturer : Schramm
Condition : Used

Description :

Schramm T64HB Drill Rig - S/N: T64HB-622
Detroit 8V71 diesel deck engine
450 CFM / 250PSI piston air compressor
3 cylinder Water injection pump
(3) leveling jacks
Pipe Rack
300 ft. of used CP style 20ft x 4-1/2" Drill Rods Included
Mounted on a 1973 GMC 6500 Truck
C70 with a gas engine

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Used Schramm T64HB Drilling Rig for Sale
Schramm T64HB Used Drilling Rig for Sale
Schramm T64HB Land Drilling Rig for Sale
Schramm T64HB Drilling Rig for Sale in USA
Schramm Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR817

Schramm T64HB Drilling Rig for Sale
Drilling Rig - Schramm T64HB - For Sale

Model : T64HB Drill Rig Long Tower
Manufacturer : Schramm
Year : 1978
Condition : Used

Description :

1978 Schramm T64HB Drill Rig - S/N: T64HB-1186
Long Tower with jib boom
(9) 4-1/2" x 20ft drill rods included
Rod rack
Detroit Diesel Deck Engine
Schramm 425 cfm / 250 psi air compressor
Cat water injection pump
(3) leveling jacks
Table bushings
Drill collar and steel tooth tri-cone included
Mounted on a GMC 7500 Truck - VIN# TJV738V566193
13 Speed Transmission
6 Cylinder Detroit Diesel Engine
10.00-20 Tires
Shows 60,940 Miles
Note: Truck runs and drives when tested last

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Schramm T64HB Drilling Rig - 1978 Built for Sale
Used Schramm T64HB Drilling Rig for Sale
1978 Built Schramm T64HB Drilling Rig for Sale
Schramm T64HB Drilling Rig for Sale in USA
Schramm Used Drilling Rig for Sale
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR564

CME 45 Auger Drilling Rig for Sale
Drilling Rig - CME 45 Auger - For Sale

Model : 45 Auger Drill Rig
Manufacturer : CME Drill
Year : 1978
Condition : Used

Description :

1978 CME 45 Drilling Rig Truck - Serial: 123884
Ford 4 Cylinder Gas Engine
Hours : 358
Auto Hammer
2 winch lines
22ft 4" auger sections
5ft 8" auger sections
23ft 5ft boring rod extensions
8" rock bit
4" rock bit
8" auger bit
Mounted on a 1997 Ford F450 Super Duty - VIN: 1FDLF47F8VEB32264
Miles : 235,967 on odometer
7.3L Power Stroke Diesel Engine
Manual 5 Speed Transmission
Suspension : Spring
Brakes : Hydraulic
GVWR : 15,000 lbs
Wheelbase : 161" & Tire Size: 235/85R16

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
1978 Built CME 45 Auger Drilling Rig for Sale
Used CME Drilling Rig for Sale
CME 45 Auger Used Drilling Rig for Sale
CME 45 Auger Land Drilling Rig for Sale
CME 45 Auger Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR803

Failing CF-15 Drilling Rig for Sale
Drilling Rig - Failing CF-15 - For Sale

Model : CF15 Drill Rig
Manufacturer : Failing
Condition : Used

Description :

Failing CF-15 Drill Rig
5-1/2” X 8“ Dupex Piston Mud Pump
7-1/2” Retractable Table
Air Clutches
Mounted on a 1982 BRIGADIER Truck
Detroit 6 53 T Diesel Engine PTO (with Paperwork from Rebuild 3-4
Years ago & a new radiator and cooling system was also installed
at time of engine rebuild)
The pump was recently rebuilt and the table is in great shape
Lovejoy style couplings were replaced with a drive shaft
400 ft of 2-3/8" IF (2-3/8" X 15ft)

Note: It does not have an air compressor
Hydraulic Leveling Jacks (2 on Rear, 1 on Front)
mast in 1982 for drilling wells on oil pads. Was stored until around
1990 before being put back into operation but rig has worked limited
hours since then. Reliable ready-to-work drill today

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Used Failing CF-15 Drilling Rig for Sale
Failing Drilling Rig for Sale
Used Failing CF-15 Land Drilling Rig for Sale
Failing CF-15 Used Drilling Rig for Sale
Failing CF-15 Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR815

Schramm T64HB Drilling Rig for Sale
Drilling Rig - Schramm T64HB - For Sale

Model : T64HB Drill Rig
Manufacturer : Schramm
Year : 1976
Condition : Used

Description :

1976 Schramm T64HB Drill Rig
Caterpillar 3406 Diesel Deck Engine - rated 425 HP
425 cfm / 250 psi Air Compressor (Rebuilt)
Pipe Rack
Hydraulic Leveling Jacks
Mounted on an International 2000 - Model 40S Truck
DT 8.7 Liter 300HP Diesel Engine
Front Axle: 16000LBS, Rear Axle: 20000LBS
Fuller 15 speed transmission
224,571 Miles
Air Suspension
300 ft of Drill Rod (20ft x 4-1/2") included
Price reduced as of September 2023

Location : Canada

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
1976 Built Schramm T64HB Drilling Rig for Sale
Schramm T64HB Drilling Rig - 1976 Built - For Sale
Used Schramm T64HB Drilling Rig for Sale
Schramm Land Drilling Rig for Sale
Schramm T64HB Drilling Rig for Sale in Canada
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR1423

Atlas Copco RD20 Range III Drilling Rig for Sale
Drilling Rig - Atlas Copco RD20 Range III - For Sale

Model : RD20 III Drill Rig
Manufacturer : Atlas Copco
Year : 2007
Condition : Used

Description :

2007 Atlas Copco RD20 Range III Drill Rig - S/N# 21103
Ingersoll-Rand 1250 cfm / 350 psi Air Compressor
Cummins QSK19 Diesel Deck Engine
30,000 lbs Pulldown
120,000 lbs Pullback Capacity
No Carousel
Hydraulic Utility Winches
(5) Hydraulic Leveling Jacks
4 Piston Bean Water Injection Pump
Drillers Control
Mounted on a CCC (Crane Carrier Company) 5-Axle Carrier with Single Man CAB
VIN: 1CYDGV5887T047843
C-13 Diesel Engine
Eaton 8 Speed Transmission
Shows 15,821 Odometer Miles

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
2007 Built Atlas Copco RD20 Range III Drilling Rig for Sale
Used Atlas Copco RD20 Range III Drilling Rig for Sale
Atlas Copco RD20 Range III Drilling Rig - 2007 Built for Sale
Atlas Copco RD20 Range III Used Land Drilling Rig for Sale
Atlas Copco RD20 Range III Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR344

Diedrich D120 Drilling Rig for Sale
Drilling Rig - Diedrich D120 - For Sale

Model : D120 Drill Rig
Manufacturer : Diedrich
Year : 1991
Condition : Used

Description :

1991 Diedrich D120 Drill Rig
John Deer inline 6 (rebuilt less than 7 years ago with minimum hours)
Engine Serial #: T06059D473497
1235.1 Hours
Rebuilt transmission 2/21/17
Moyno 3L8 Pump
500 gallon water tank
Cathead
Fluted kelly
(2) auger racks Tool boxes,
(4) outriggers, 3k, 7k, 10k Winches
Duel mounted swinging auger racks
Mounted on a 1996 Freightliner FLD120 Truck
Rockwell 10 speed transmission
151,777 Miles showing on dash

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Diedrich D120 Drilling Rig - 1991 Built for Sale
1991 Built Diedrich D120 Drilling Rig for Sale
Used Diedrich D120 Drilling Rig for Sale
Diedrich Land Drilling Rig for Sale in USA
Used Diedrich Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR217

Ingersoll-Rand T4BH (Blast Hole) Drilling Rig - For Sale
2004 Built Ingersoll-Rand T4BH (Blast Hole) Drill Rig

Model : T4BH Drill Rig
Manufacturer : Ingersoll-Rand
Year : 2004
Condition : Used

Description :

2004 Ingersoll-Rand T4BH (Blast Hole) Drill Rig - S/N: 7851
IR HR2 900 cfm / 350 psi Air Compressor
Cummins QSX15 Diesel Deck Engine
2 - Motor Spur Gear Power Head (Rebuilt)
5 Rod Carousel
2 - Cylinder Bean Water Injection Pump
Hammer Oiler
Drillers Cab
Hydraulic Leveling Jacks
Mounted on a CCC (Crane Carrier Company) - VIN#: 1CYDCE4854T046335
CAT C-10 Diesel Engine - S/N: MBJ04202
Note: Can be converted to T4W and set up for water well drilling at an extra cost
13,395 Frame hours

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Drilling Rig -  Ingersoll-Rand T4BH (Blast Hole) - For Sale
Used Drilling Rig -  Ingersoll-Rand T4BH (Blast Hole)
Ingersoll-Rand T4BH (Blast Hole) Drilling Rig - 2004 Built for Sale
Used Ingersoll-Rand T4BH (Blast Hole) Drill Rig for Sale
Ingersoll-Rand T4BH (Blast Hole) Drill Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR343

Schramm T64HB Drilling Rig for Sale
Drilling Rig - Schramm T64HB Drilling Rig - For Sale

Model : T64HB Drill Rig
Manufacturer : Schramm
Year : 1977
Condition : Used

Description :

1977 Schramm T64HB Drill Rig
Mounted on a GMC truck
Odometer 63,913 miles
425 cfm / 250 psi piston air compressor
Included with bushings, tooling, (2) hammers 6" and 5" just bought
a long with 3 brand new bits 8", 6" and a 5"
Lazy Susan Carousel
Has 540 ft of drill pipe
Owner have drilled 9 wells with it including 2 that went 505 ft and one that went 405 ft
Mud pump shown in photo is “NOT” included.

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
1977 Built Schramm T64HB Drilling Rig for Sale
Schramm T64HB Drilling Rig - 1977 Built for Sale
Used Schramm T64HB Drilling Rig for Sale
1977 Built Schramm Land Drilling Rig for Sale
Schramm T64HB Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR393

Atlas Copco RD20 Range III Drilling Rig for Sale
Drilling Rig - Atlas Copco RD20 Range III - For Sale

Model : RD20 Range III Drill Rig
Manufacturer : Atlas Copco
Year : 2006
Condition : Used

Description :

2006 Atlas Copco RD20 Range III Drill Rig - S/N-21013
IR 1250 cfm / 350 psi Air Compressor with In & Out box
Cummins QSK-19 Diesel Deck Engine (7187 Hours since rebuilt around 2022)
120,000 lbs of Pullback
Bean Triplex Mist Pump
17-1/2" Table Opening
Mounted on a CCC (Crane Carrier Company) 5-Axle Carrier - VIN#:1CYDGV5806T047236
CAT C13 Diesel Engine
FULLER 8-Speed Transmission
(5) Hydraulic Leveling Jacks
425/65R22.5 Front & 11R-22.5 Rear Tires
Base Beams Main Hydraulic pump rebuilt in 2022  
Note : No carousel
 
Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
2006 Built Atlas Copco RD20 Range III Drilling Rig for Sale
Atlas Copco RD20 Range III Drilling Rig - 2006 Built for Sale
Used Atlas Copco RD20 Range III Drilling Rig for Sale
Atlas Copco Used Drilling Rig for Sale
Atlas Copco RD20 Range III Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR1014

Atlas Copco T30 Power ROC Crawler Drilling Rig for Sale
Drilling Rig - Atlas Copco T30 Power ROC Crawler - For Sale

Model : T30 Power ROC Crawler Drill Rig
Manufacturer : Atlas Copco
Year : 2016
Condition : Used

Description :

2016 Atlas Copco T30 Power ROC Crawler Drill Rig
S/N: TMG16SED 0064
4522 Hours
Cummins QSB4.5 Diesel Engine - rated 155 HP
Drifter YD14S - S/N: AVO15D408
Main Pump Rebuilt 1500 Hours Ago
Both Final Drives (Rebuilt 200 Hours Ago)
Set Up for T45
Hole Size 1.75 TO 3.5"
14 FT Start 12 ft Drilling Steel

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Atlas Copco T30 Power ROC Crawler Drilling Rig - 2016 Built for Sale
2016 Built Atlas Copco T30 Power ROC Crawler Drilling Rig for Sale
Used Atlas Copco T30 Power ROC Crawler Drilling Rig for Sale
Atlas Copco Crawler Drilling Rig for Sale
Atlas Copco T30 Power ROC Crawler Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR774

Ingersoll-Rand 350 Crawler Air Drilling Rig for Sale
Drilling Rig - Ingersoll-Rand 350 Crawler - For Sale

Model : 350 Drill Rig - Crawler
Manufacturer : Ingersoll-Rand
Condition : Used

Ingersoll-Rand 350 Crawler Air Drill Rig
Updated system
Joy drifter
Note: Runs and drills but needs some oil leaks fixed

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Used Ingersoll-Rand 350 Crawler Air Drilling Rig for Sale
Ingersoll-Rand Crawler Air Drilling Rig for Sale
Ingersoll-Rand Used 350 Crawler Drilling Rig - For Sale
Ingersoll-Rand Crawler Air Drilling Rig for Sale in USA
Ingersoll-Rand Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR426

Ingersoll Rand TH60 Drilling Rig for Sale
Ingersoll Rand TH60 Drilling Rig - 1978 Built - For Sale

Model : TH60 Drill Rig
Manufacturer : Ingersoll-Rand
Year : 1978
Condition : Used

Description :

1978 Ingersoll Rand TH60 Drill Rig
IR 750 cfm / 250 psi air compressor
(3) hydraulic leveling jacks
Rod rack
Water injection pump
7 rod carousel for handling 3-1/2" drill pipe
Around 60ft - 100ft of drill pipe included (will confirm soon)
Mounted on a 1978 International Paystar 5000 Truck
Detroit 8V92 Diesel Engine
Note: Owner says they drilled 2 wells with it & went down to about 425 ft
Note: Owner says a complete service has been done, replacing all the water,
oil, and air filters, changed the oils, new windshield, new truck compressor,
replaced several tires, new cables, replaced a bunch of air ines, funk box
totally rebuilt, 2 Charlynn motors rebuilt, break out wrench cylinder rebuilt,
just to list a few things. All the head bearings were replaced as well
Included with some tooling including bushings and some subs

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Drilling Rig - Ingersoll Rand TH60 - For Sale
1978 Built Ingersoll Rand TH60 Drilling Rig for Sale
Used Ingersoll Rand TH60 Drilling Rig for Sale
1978 Built Ingersoll Rand Used Land Drilling Rig for Sale
Ingersoll Rand TH60 Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR808

Hydraulic Crawler Drill Rig and Air Compressor for Sale
Generic Hydraulic Crawler Drilling Rig for Sale

Model : Hydraulic Crawler Drill Rig & KSZJ 18/17 Air Compressor
Manufacturer : Generic
Condition : Used

Description :

Hydraulic Crawler Drill Rig and Air Compressor
KW180 Hydraulic Crawler Mounted Drill Rig
168 Hours
Max Pull 12t / Max Push 4.5t
Top Drive with 2-3/8" Reg Box Connection
Has a 10ft Foot Stroke
2020 Kaishan KSZJ 18/17 Air Compressor
Yuchai (Cummins) Diesel Powered
Dual Screw Air End
168 Hours
635 CFM @ 250 PSI
180m 3" Drill Rods in 10ft Lengths, 2 3/8" Reg Connections
1x New 7" Step Bit
1x New 4" Step Bit

Location : Canada

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Generic Hydraulic Crawler Drill Rig and Air Compressor for Sale
Generic Used Hydraulic Crawler Drilling Rig and Air Compressor
Used Hydraulic Crawler Drilling Rig for Sale
Used Generic Hydraulic Crawler Drilling Rig for Sale
Generic Air Compressor for Sale
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR849

Generic MC 900 P Drilling Rig for Sale
Drilling Rig - Generic MC 900 P DD for Sale

Model : MC 900 P Drill Rig
Manufacturer : Generic
Condition : Used

Description :

1 - Comacchio MC 900 P DD Drill Rig
1 - Comacchio MC 900 P RC Drill Rig
Deutz BF 4M 1013 FC 112 KW/152 HP Diesel Engine
13 Ft Feed Stroke
Rotary Head
Double Head
Winch - 4,966 Lb
Foam Pump
Triplex Pump
D.T.H Lubricator

Location : Africa

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Used Generic MC 900 P Drilling Rig for Sale
Generic Drilling Rig for Sale
Comacchio MC 900 P DD Drilling Rig for Sale
Generic MC 900 P Drilling Rig for Sale in Africa
Generic MC 900 P Land Drilling Rig for Sale
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR657

Ingersoll-Rand TH60 Drilling Rig for Sale
Drilling Rig - Ingersoll-Rand TH60 - For Sale

Model : TH60 Drill Rig
Manufacturer : Ingersoll-Rand
Year : 1985
Condition : Used

Description :

1985 Ingersoll-Rand TH60 Drill Rig - S/N: 0838
Mounted on an International Paystar 5000 Truck - VIN #2HTTGDWT6FCA161151985
Detroit 8V71 diesel engine (6673+ hours)
IR 750 cfm / 250 psi Air Compressor (6857+ hours)
6 Rod Carousel
15 Drill Pipe (20ft x 4-1/2") included
128,081+ Miles on Truck
Hydraulic Leveling Jacks
Pipe Rack

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
1985 Built Ingersoll-Rand TH60 Drilling Rig for Sale
Ingersoll-Rand TH60 Drilling Rig - 1985 Built - For Sale
Used Ingersoll-Rand TH60 Drilling Rig for Sale
Ingersoll-Rand TH60 Drilling Rig for Sale in USA
Ingersoll-Rand Used Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR399

3000M rig For Sale - Ideco H30 Double
Ideco H30 Double 3000m Rig For sale

Specifications
Ideco H-30 model with a 40 X 8 – 3808 drum size
Self propelled double drum, back in & 4 axel carrier
Rated capacity of 3000m – 73mm tubing
Detroit 8V92N, 365 HP- 225 KW engine
Allison CLT5860 6 speed transmission
20.3 X 101.6 main drum brakes
20.3 X 96.5 sand line brakes
Pemco 96-170, 29m rated, 78 dNa & stung 6
lines mast
3000m of 73mm tubing racking capacity
Sowa 0824-3-A 100 ton travel blocks
Vapor proof florescent & sodium lights
25.4 mm X 300m drilling line
14mm X 3000 m sand line
Hydraulic Martin Decker Clipper weight indicator
Dual winches

Combination
3 compartment skidded steel building
3.5m W x 11.6m L
John Deer 75 KW generator

Handling Equipment
Foster 58-93R tubing tongs
Cavins Advance Model C air slips
BJ-90-TA -100 ton X 73mm & BJ-90-TA-65 ton X 60.2 mm elevators
73 mm & 60.3mm are the standard tubing sizes
19mm – 25mm rod sizes
2 – 2.4m x 13.7m & 1 – 2.4m x 5m rig mats
1.25m W x 12.5m L c/w 2 sets hinged pipe catwalk racks

Safety Equipment
4 - 14kg dry chemical fire extinguishers
4 self-contained Scott air pack breathing apparatuses c/w 2 spare bottles
LEL monitor & 6 personal gas detector monitors
Safety and directional signs
Electrical ground bonding equipment
Basket stretcher c/w spine board, rescue slings & blankets
Crown saver
2 self-retracting life lines

BOP Equipment
Class III
Shaffer 152mm X 35mpa, LWS double gate & shaffer spherical
Wagner 3 accumulator station - 250 L 21mpa c/w operators controls & N2 backup
mounted in skidded combination building
2 -73mm - 35mpa safety valves
89mm rod BOP
152mm kill spool X 21mpa c/w 50mm wing valve
76mm x 21 mpa swab lubricator c/w jars & tool trap
76mm X 20mpa swabbing valve

Pump
Skidded heated building
National JWS-340 triplex 102mm plungers X 127mm stroke
John Deer Model 6125H 12.5 L 350 HP engine
Eaton 10 speed transmission
Mission Magnum 127mm X 152mm charge pump
6 – 50mm X 35mpa manifold

Mud Tank
38m3 two compartment mud tank c/w stairs, railings, mix hopper, mud guns,
settling trough, steam coil, lighting & wind flag
120m X 50mm - 35mpa line pipe
12m X 10mm suction hose
External gauge

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

------------------------------------------------------------------------------
Search words(for official use only) :
Ideco H30 Rig - 3000m for Sale
Ideco H30 Double Rig For Sale
Good and Used Workover rigs
American workover rigs for sale
Used American Rigs for Sale
Carrier Mounted Workover Rigs for sale
Workover rig Builders
Workover Rig Dealers
Workover Rig Sellers
Used Workover Rigs for Sale
------------------------------------------------------------------------------

Worldrigs ID: WR1032

Schramm T300 Drilling Rig for Sale
Drilling Rig - Schramm T300 - For Sale

Model : T300 Drill Rig
Manufacturer : Schramm
Year : 2005
Condition : Used

Description :

2005 Schramm T300 Drill Rig
Mounted to a 2005 International Truck
DT466 Diesel Engine
42,000 miles
9,000 hours
Sullair 300 cfm / 200 psi Air Compressor
500 ft of drill pipe (20ft x 3-1/2”) included

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
2005 Built Schramm T300 Drilling Rig for Sale
Used Schramm T300 Drilling Rig for Sale
Schramm T300 Drilling Rig - 2005 Built - For Sale
Schramm T300 Drilling Rig for Sale in USA
Used Schramm Land Drilling Rig for Sale
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR531

Atlas Copco T4BH (Blast Hole) Drilling Rig for Sale
Atlas Copco T4BH Drilling Rig - 2005 Built - For Sale

Model : T4BH (Blast Hole) Drill Rig
Manufacturer : Atlas Copco
Year : 2005
Condition : Used

Description :

2005 Atlas Copco T4BH (Blast Hole) Drill Rig - S/N: 8401
37,500 Lbs of Pullback
Note: Can be converted to T4W at an extra cost with 50k or 70k pullback options
IR HR2.5 1070 cfm / 350 psi Air Compressor
Cummins ISX15 Diesel Deck Engine
5-Rod Carousel to handle 5” x 25ft Drill Pipe (5 included)
Hammer Lubricator
2 Motor Spur Gear Head with Floating Sub
Hydraulic Leveling Jacks
Mounted on a CCC (Crane Carrier Company) Truck
CAT Diesel Engine
Rear Driller Cab

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Drilling Rig - Atlas Copco T4BH (Blast Hole) - For Sale
Used Atlas Copco T4BH (Blast Hole) Drilling Rig for Sale
2005 Built Atlas Copco T4BH (Blast Hole) Drilling Rig for Sale
Atlas Copco T4BH Drilling Rig for Sale in USA
Atlas Copco T4BH (Blast Hole) Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR316

Chicago Pneumatic T-700WH Deep Hole Drill Rig & Package
Drilling Rig - Chicago Pneumatic - 1981 Built for Sale

Model : T-700WH Deep Hole Drill Rig & Package
Manufacturer : Chicago Pneumatic
Year : 1981
Condition : Used

Description :

1981 Chicago Pneumatic T-700WH Deep Hole Drill Rig & Package
900/350 on-board air,
mounted on a tandem axle steer Kenworth carrier -75,000# pull-back,
4-rod carousel,
CAT 3406B deck engine recently replaced (less than 500 hours ago),
rebuilt dual top-head motors and planetaries,
rebuilt rotational pump and fan motor/pump,
new Nylotron head guides,
new winch line

Additional equipment included :
3,200ft 4 1/2"  x 30ft drill pipe with tandem axle drill pipe trailer
mounted IR tugger winch,
skid mounted Sullair 900/350 air compressor,
skid mounted 2000 gallon fuel tank,
skid mounted 300 bbl water tank,
skid mounted doghouse,
spare CAT 3406B engine (needs rebuilt),
6" hammer, 12" hammer/stabilizer combo,
12" tri-cone stabilizer,
casing lifters for both threaded and plain-end,
casing slips, break out wrench, J-wrench.

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
1981 Built Chicago Pneumatic T-700WH Deep Hole Drilling Rig for Sale
Used Chicago-Pneumatic Drilling Rig for Sale
Used Chicago Pneumatic T-700WH Deep Hole Drill Rig & Package
Chicago Pneumatic T-700WH Deep Hole Drilling Rig for Sale in USA
Chicago-Pneumatic Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR308

Speedstar Quickdrill 600 Drilling Rig for Sale
Speedstar Quickdrill 600 Drilling Rig - 1984 Built - For Sale

Model : 600 Quickdrill Rig
Manufacturer : Speedstar
Year : 1984
Condition : Used

Description :

1984 Speedstar Quickdrill 600 Drill Rig
Mounted on an International 2574 Truck
Rebuilt - Detroit 8V92 Deisel Engine with Jake brakes
Rebuilt - Eaton Fuller 13 speed transmission with new clutch-throw out bearing
All new coolant-oil hoses, radiator, exhaust from turbo to muffler, drive shafts, &
rear end
Feed-outrigger-jib-rod jaw-tower hydraulic cylinders and hoses all new
Fully rebuilt top head - gears, bearings, seals, hydraulic motors, north Houston
machine under head mud and air swivel all new. New high pressure airline and
fittings from compressor to top head.
10 GPM water injection pump - completely rebuilt
12,000 lb main winch fully rebuilt including all bearings, seals, and hydraulic motor.
Rebuilt rod box
New oil filters on compressor
600 cfm / 250 air compressor
500 ft 3-1/2” OD by 2-3/8 IF drill rods
table bushings, etc.
Drive traction tires 60% percent & Steer tires 80% percent estimated

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Drilling Rig - Speedstar Quickdrill 600 for Sale
Used Speedstar Quickdrill 600 Drilling Rig for Sale
1984 Built Speedstar Quickdrill 600 for Sale
Speedstar Quickdrill 600 Drilling Rig for Sale in USA
Speedstar Land Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR1135

Schramm T64HB Drilling Rig for Sale
Schramm Used Drilling Rig For Sale

Model : T64HB Drill Rig
Manufacturer : Schramm
Condition : Used

Schramm T64HB Drill Rig - S/N: T64HB-479
425 cfm / 250 psi air compressor
Detroit 8V71N Diesel Deck Engine
Two piston Bean water injection pump
2022 rebuilt top head with Western mud swivel
260 ft of 4-1/2" drill pipe (20ft x 4-1/2")
Two used 6" DTH Hammers
Pipe Rack
Mounted on a 1989 International Truck
DT466 Diesel Engine with 8LL speed transmission and power divider

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Drilling Rig - Schramm T64HB - For Sale
Schramm T64HB Used Drilling Rig For Sale
Schramm Drilling Rig for Sale
Schramm T64HB Drilling Rig for Sale in USA
Schramm Used Land Drilling Rig For Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR346

Used Ideco H37 Rig For sale
Mechanical Drilling Rig - IDECO H37 6500’ For sale

Derrick
National Double Derrick Scope Up (New RAM)
Bottom section 33-1/2 feet > 89 Ft Working room
Top section 56 feet - 91 feet overall

Drawworks
Double drum – IDECO H37
All bearings have been checked, new brake pads
CAT Engine, 550 hp, 0 time – Brand new, with Allison Transmission.
Draw works trailer-mounted 3 New Tandem
Axels – New Brakes and air lines tires steel radials – 20 inch

Substructure
6’6” tall trailer-mounted with cat walk,
12’ sub-structure at rotary table level
Ramp 5 ft tall.
Catwalk & rotary table trailer-mounted
2 axel tandem, new axels, tires and airlines

Mud Pumps
(1)Wilson Snider 6” X 16” Stroke 12893
(2)Wheland 7 1/2” Liners X 14” Stroke p/b
Cummings 350 hp engine,
(3)Gardner Denver FXK 1952 6” X 14” Stroke p/b
CAT 500 hp engine
API Fluid End

Traveling blocks
BJ – 460 ton w/ 6 lines
Swivel – REWSTE 4 Sx

Water Pump
4” X 6” Stroke Gardner Denver
FXG 137 Gallon fuel tank mounted on pump
Skid – Powered by 3 cylinder Detroit diesel
Rotary table, National 12-1/2”

Water Tank
8’W X 8’D X 38-1/2” L – 400 barrel tank

Top Dog House
Double wall insulated 8’ W X 35’ L - 40 all over

Bottom Dog House
7’10” W X 23’10” L

Mud Pit
4’ deep X 7’ W X 40’ L
Generator, CAT powered.

To see more information and pictures, please see
http://www.worldoils.com/landrigs/rig250.php





Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------
Search words(for official use only) :
Land rig - 550hp for sale
550hp Drilling Rig for sale
Ideco H37 Drilling Rig For sale
Ideco H37 for sale
Mechanical Drilling Rig for sale
-------------------------------------------------------------------