Worldoils
Home Biofuels Oil & Gas Directory Glossary Research Training News Newsletter Events Oil & Gas Jobs Contact Water Well Rigs
Land Drilling Rigs Jackup Rigs LDPE Recycling Oilfield Container Camps Offshore Accommodation Steel Houses Mini Submarines Oil & Gas Equipment Marketplace
Home Biofuels Oil & Gas Directory Glossary Research Training News
Newsletter Events Oil & Gas Jobs Water Well Rigs Land Drilling Rigs
Jackup Rigs LDPE Recycling Oilfield Container Camps Crude Oil Price History
Steel Houses Mini Submarines Oil & Gas Equipment Marketplace Contact
Home Jackup Rigs LDPE Recycling
News Water Well Rigs Land Drilling Rigs
Mini Submarines Events Steel Houses
Oilfield Container Camps Oil & Gas Directory
Oil & Gas Equipment Marketplace Contact

Untitled Document
alert  

If you cannot find the new or used offshore rigs, vessels or quipment of any type, size or make that you are looking for, please send us an email to and we shall offer you.

alert
Untitled Document
   

Untitled Document
 
Search Here

Rig/Vessel/Equipment Name: 
Category: 
Subcategory: 
Buy/Sell/Hire/Need for hiring: 
ID: 

 
Untitled Document
Cranes for sale
 
37 Ton Hagglunds Crane G1626 for sale
Worldoils Marketplace
37 Ton Hagglunds Crane G1626 for sale

Worldrigs ID: WR2287

Hagglunds Crane G1626 for sale
Used Hagglunds Crane G1626 for sale


Technical Specifications
Type of crane : G1626
Weight : 37 tons
Type of current : 3-60HZ
Supply voltage : 440V
Control voltage : 220V

Mechanical Data
Jib radius : Max 26m
Jib radius : Min 3.5m
Hoisting capacity, single crane : Max 16 ton
Hoisting capacity, single crane at Jib radius 26m : Max 16 ton

Hoisting speed at 0-16 ton : 42m/min
Hoisting speed at 0-6.5 ton : 84m/min

Jib radius : 30 S
Slewing speed, single crane : Max 1.5 rev, min
Wire rope, hoising winch : Dia 38mm x 126m
Wire rope, luffing winch : Dia 32mm x 73.6m

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us anemail to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


-------------------------------------------------------------------------------------
Search Words (for official use only) :
Hagglunds Crane G1626 for sale
37 Ton Hagglunds Crane G1626 for sale
Used Hagglunds Crane G1626 for sale
Hagglunds Crane G1626 - 37 ton - For Sale

------------------------------------------------------------------------------------
 
Deck Crane for Sale
Worldoils Marketplace
Deck Crane for Sale

Worldrigs ID: WR2421

Deck Crane for Sale

Description :

Technical Data
General :
Type of crane : L403 2/3033.5-2

Weight : 66 ton
Type of current : 3 - 60Hz
Supply voltage : 440V
Control voltage : 100V

Mechanical Data :
Jib radius ( At SWL  = 40 tons) : max. 32.0m
Jib radius ( At SWL  = 30 tons) : max. 33.5m
Jib radius : min. 2.4m
Lifting height H : 7.845m
Lifting height K : 27.155m

Hoisting capacity at jib radius 32m : max. 40 ton
Hoisting capacity at jib radius 33.5m : max. 30 ton
Hoisting speed at 0 -40/30 ton : 0 - 20 m/min.
Hoisting speed at 0 - 16 ton : 0 - 40 m/min.
Luffing time from max. to min. jib radius : 65 sec.
Slewing speed : max. 0.6 rev/min.

Wire rope, hoisting winch : ø 34 mm x 291.0m
                                              No. 388 8065-805
Wire rope, hoisting winch : ø 28 mm x 116.5m
                                               No. 388 3261-810
Wire rope, stabilizing winch : ø mm m
                                                  No.
Sling, stabilizng winch : No.

Cable for cable winchs : No.

Cable load-relieving : No.

Socket plug : No.

Clamp : No.

Electrical Data :
Main motor
Type of current : 3-60 Hz
Rated power, cont. : 185 kw
Rated power, 40% int. : 295 rev./min.
Speed : 1785 rev./min.
Rated voltage : 440 v
Starting current : 640 A

Gear box data :
Gear box type : 388 3140-801
Gear ratio : i = 0.683
Speed : rev/min

Hydraulic data :
Hoisting winch circuit : 187 5241-801
Pump type : 2 x 119 cm3
Hydraulic motor type : 078 0040-803
Flow rate, per rev. theoretical : 33780 cm3/rev.

Luffing winch circuit :
Pump type : 187 5241-802
Displacement : 2 x 119 cm3
Hydrualic motor type : 178 1322-801
Flow rate, per rev. theoretical : 16300 cm3/rev.

Slewing circuit :
Pump type : 187 5241-802
Displacement : 119 cm3
Hydraulic motor type : 388 3127-801
Flow rate, per rev. theoretical : 59.8 cm3/rev.

Feed and control circuit :
Pump type : 388 1669-801
Displacement : 49.1cm3
Feed pump motor
Type of curent : 3-60 Hz
Rated power 2 poles : 20 kw
Rated power 4 poles : 13 kw
Speed 2 poles : 3360 r/min
Speed 4 poles : 1680 r/min
Starting current 2 poles : 141A
Starting current 4 poles : 107A

Oil tank
Oil volume; Oil filling : 650 litres


Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------
Search words (for official use only) :
Deck Crane for Sale
Used Deck Crane for Sale
66 Ton Deck Crane 
-------------------------------------------------------------------------------------------

 
Used OS200 Pedestral Crane for sale
Worldoils Marketplace
Used OS200 Pedestral Crane for sale

Worldrigs ID: WR2288

OS200 Pedestral Crane for sale
55M Boom Length - Pedestral Crane for sale


Technical Data
Single fall (10 TE at 58.7m) : Platform duty
Two fall (30 TE at 40m) : Platform duty
Three fall (45 TE at 25m) : Platform duty
Four fall (60 TE at 20m) : Platform duty

Boom length : 55M (Boom nose pulley to boom foot pin)
Tail radius : 6.0M

Height of lift (Min radius above BFP) :
34.35M - Whip
50.35M - Main

Depth of lower (Below BFP) :
86.65 - Whip
75.65 - Main

Ropes

Main Hoist : 36mm x 587m long
Tail rope : 10mm c 60m long

Whip hoist : 40mm x 218m long
Tail rope : 10mm x 60m long

Boom hoist : 38mm x 524m long

Note : Main and whip hoist ropes are not to be used during  works test.

Pulleys
Main : 864mm groove dia
Whip : 964mm groove dia
Boom : 1026 and 1261mm groove dia

Slew ring : Rothe erde, Clyde fasterners

Lifting Gear
Ansell Jones
10te ball swivel
30/45 te, 2/3 fall block
60te, 4 fall block

Splitter gearbox : Flender
Engine/SP gearbox coupling : Vulkan, Cardan shaft type
Air receiver : Charnock, 30 cu.ft.

Motors CW brakes
Main hoist : Staffa C200-180-80 X 2
Whip hoist : Staffa C200-160-100 X 2
Boom hoist : Staffa C200-180-90 X 2
Slew : Rexroth A2F63 X 2

Pumps
Main hoist & whip hoist : Abex PII 2 X 2
Boom hoist : Abex PII X 2
Slew : Abex P6 X 1
Retarder : Rexroth A2F63/80
Lube : Splitter gearbox - integral with gearbox

Prime Mover

Diesel engine - Finning, Cannock
Caterpillar 3412 DI TA
Continuous output at flywheel
480kw at 1900rpm
1 hour in 12hr rating 560kw

Driver's cabin : S&P design

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us anemail to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


------------------------------------------------------------------------------------------------------
Search Words (for official use only) :
OS200 Pedestral Crane for sale
OS200 Pedestral Crane - 55M Boom Length - For sale
Used Pedestral Crane for sale
Pedestral Crane - OS200 - For Sale

------------------------------------------------------------------------------------------------------
Gottwald HMK 280E Lattice Boom Crane for Sale
Worldoils Marketplace
Gottwald HMK 280E Lattice Boom Crane for Sale

Worldrigs ID: WR895

Gottwald HMK 280E Lattice Boom Crane
Lattice Boom Crane - 1993 built - For Sale
1993 built Lattice Boom Crane for Sale

Description
Rubber tyred STS with lattice boom
Year of Manufacture : 1993

Capacity
40 ton/33 mtr.
19 ton/ 47 mtr.

Generator : Siemens 600 kVa
Operating hours : 8000

Condition : Was normal working on jobsite up to january 2013.
One of the two lifting cable is broken (25-30000 Eur cost) Should be repaired by client.
Crane selled as it is, where is

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
--------------------------------------------------------------------------------------------------------
Search words (for official use only) -
Gottwald HMK 280E Lattice Boom Crane
Used
Gottwald HMK 280E Lattice Boom Crane for Sale
1993 built Lattice Boom Crane -
Gottwald HMK 280E
Used Lattice Boom Crane for sale in Europe
1993 Built - Lattice Boom Crane - For Sale
Lattice Boom Crane for Sale - 1993 built
Gottwald HMK 280E Lattice Boom Crane for Sale in Europe
1993 built Gottwald HMK 280E Lattice Boom Crane

-------------------------------------------------------------------------------------------------------

 
30 ton Electro Hydraulic Knuckle Boom Offshore Crane for Sale
Worldoils Marketplace
30 ton Electro Hydraulic Knuckle Boom Offshore Crane for Sale

Worldrigs ID: WR1081

Electro-Hydraulic Knuckle Boom Offshore Crane
30T Knuckle Boom Offshore Crane
30T Crane for offshore vessels for sale

General :
Classification Society : ABS
Design Life : Crane design is based on a lifetime of 20 years
Lift definition(s) :
1. Lifts between vessel and quay side in sheltered waters, i.e. harbor lift,
2. Lifts on vessel’s deck, i.e. internal lift
3. Lifts in open sea over side of vessel to Vessel, i.e. external lift

Technical Data
Slewing Angle : 360º
Slewing Speed : 0~1rpm
Luffing time : 90s Up/down

Main Winch Data :
Lifting Capacity(SWL) : 30T@12M,10T@22M;
Dynamic Factor : 1.40
Working Radius : 6.7m(Min) / 33m(Max)
Main Lifting Speed : 0~15m/min
Lifting Height : 60m
List/trim Condition : According to API 2C rules
Steel Wire Dia : 42mm
Outer Layer,full Load : 30T
Wire Rope : Anti-Twist Type,Galvanized

Aux Winch Data :
Lifting Capacity(SWL) : 5T@33M
Dynamic Factor : 1.40
Working Radius : 6.9m(Min) / 33m(Max)
Main Lifting Speed  : 0~20m/min
Lifting Height : 40m
List/trim Condition : According to API 2C rules
Steel Wire Dia : 17mm
Outer Layer,full Load : 5T
Wire Rope : Anti-Twist Type,Galvanized

Pedestal Diameter(outer) : 2800mm
Pedestal Wall thickness : 25mm

Loading forces to deck structure   :
1. Dynamic overturning moment : 7100KN.m
2. Dynamic vertical force : 1510KN
3. Dynamic horizontal force  : 96KN

Electric Motor
Power Supply : 440V/60Hz/3Ph
Protection Grade : IP55
Insulation Grade : F
Space Heater : 230V/60Hz/1Ph
Power consumption : 250KW

Control System
Operator’s cabin :
1. Right hand side location seen from crane house towards boom tip
2. Access from ladder mounted on the pedestal
3. Mounted on vibration dampeners
4. Made from mild steel material
5. Shot blasted to SA 2.5
6. Colour of top coat as per crane
7. Air condition unit
8. Internal lighting, 2 x 18 W roof mounted above seat
9. Windows
10. Front window
11. 2 Side windows
12. All windows of tempered safety glass

Cabin controls :
1. Main control valve
2. Spring centred control handles
3. Right handle:
Hoisting up / down motion – Y-axis
Luffing up / down motion knuckle jib – X-axis
4. Left handle :
Luffing up / down motion main boom – Y-axis
Slewing right / left motion – X-axis
All motions are of infinite variable (stepless) control from zero to full speed.
5. Control panel with crane safety information :
Mode selection
Load indication with allowable load / radius information
6. Cabin console
 Wiper and washer switches
Heater control and thermostat
7. Warning horn
8. Instruction and name plates in English
9. Dynamic load radius chart

Safety System
Control system
1. Load monitoring system
2. Hook load, i.e. actual load versus permitted load
3. Load cell
4. Load limiting system

All main hydraulic circuits
are protected from over-pressure by relief valves set to
values corresponding to crane’s capacities
1. Overload alarms
2. Emergency stop

Drive system
1. Electric motor
2. Thermistor protection
3. Hydraulic power unit
4. High hydraulic oil temperature alarm / stop
5. Low hydraulic oil level alarm / stop 

Slewing machinery
1. Load holding valve which will hold motion in case of hydraulic pressure drop
2. Fail safe multi-disc brake 

Slew bearing
1. Reputable and recognized Maker
2. Bolts and nuts of high tensile steel
Slew gear
1. Gear with brake, motor and load control valve as one complete unit
2. Internal pinion drive

Luffing machinery
1. Load holding valve which will hold motion in case of hydraulic pressure drop
2. Luffing cylinder(s) designed to reduce speed before reaching end positions

Hoisting machinery
Main winch
1. Manual Overload Protection System (MOPS)
2. Load holding valve which will hold motion in case of hydraulic pressure drop
3. Fail safe multi-disc brake. Brake is spring operated and pressure released
4. 5 turns of wire rope remain on winch drum when all wire rope is paid out
5. Hook stop in upper and lower most positions
Auxiliary winch
1. Overload Protection 
2.Load holding valve which will hold motion in case of hydraulic pressure drop
3. Fail safe multi-disc brake. Brake is spring operated and pressure released

Wire sheaves
1. Fixed wire sheave bracket
2. Double roller bearings
3. Grease nipples

Hydraulic Arrangement
Hydraulic system
1. Open loop system
2. Hydraulic motor(s)

Hydraulic oil tank
1. Integrated in crane
2. Hatch for inspection and cleaning
3. Drain valve
4. Full flow return filter(s), pressure and drain filters for sensitive circuits, eg
pilot and feed circuits
5. Sight glass with temperature indicator
6. Level sensor (switch) for low level alarm and low, low level stop
7. Temperature sensor for cooler control and automatic stop in case of overheating

Hydraulic oil cooler

1. Air cooler; electrically fan driven

Hydraulic lines
1. Pipes:Mild steel material,Painted
2. Pipe fittings: Zinc plated mild steel material.External fittings are painted and
protected by Denso tape or Tectyl against corrosion.
3. Hoses:High rubber quality for best resistance against sunlight and salinity,
Wire breaded for applicable specified hydraulic pressure ratings
4. Hose couplings: Zinc plated mild steel material, External couplings are painted and
protected by Denso tape or Tectyl against corrosion

System cleanliness
1. All components are thoroughly cleaned prior to installation.
2. Cleanliness to NAS level 8

Electric Arrangement
1. Power supply :
Slipring assembly for transfer of electric power to crane’s rotating sections

Electric motor(s) (for applicable zone)
1. Motor rating S6-40 % ID
2. Protection class IP55.
3. Insulation class F.
4. Temperature rise class F.
5. Stillstand heating against condensation
6. Squirrel cage
7. Self-cooling (fan)

Electric motor starter
1. Protection class IP54.
2. Safety door (main isolation) switch
i. Start push button – green colour.
ii. Stop push button – red colour.
iii. Emergency push / pull button – red colour.
iv. Lamps
1. Power on – white colour
2. Running – green colour
3. Stillstand heating – blue colour
v. Stillstand heating control
vi. Thermistor overload protection relay.
vii. Ampere meter
viii. Hour counter

Lighting
1. Light inside operator’s cabin
2. Light inside pedestal
3. Light inside machine room

Communication System
Operator’s cabin installed equipment (preliminary):
1. Alarm horn
2. VHF / UHF
3. Telephone
4. PA-speaker

Surface Treatment
1. External treatment
1. Pedestal, crane house and boom
i. Surface preparation to ISO 8501-1, SA 2.5
ii. First coat zinc rich epoxy primer to 50 µm dry film thickness
iii. Second coat two pack epoxy to 100 µm dry film thickness
iv. Third coat polyurethane finish to 65 µm dry film thickness
v. Total; three coats to 200 µm dry film thickness

Internal treatment

1. Pedestal and crane house
i. Surface preparation to ISO 8501-1, SA 2.5
ii. First coat zinc rich epoxy primer to 40 µm dry film thickness
iii. Second coat two pack epoxy to 75 µm dry film thickness
2.  Oil tank (integrated in crane house)
i. 16.2.2.1 Surface preparation to ISO 8501-1, SA 2.5
ii. 16.2.2.2 First coat zinc rich epoxy primer to 40 µm dry film thickness
3.  Boom

No treatment as fully closed steel box structure.

Lubrication
1. Lubrication
1. Wire sheaves installed on boom.
2. All grease nipples to GB standard.
2. Crane:Fully lubricated for first set of operating hours

Documentation
User Manual :
English language , Adobe PDF file, 3 computer discs.
Paper format is available upon request.

Content :
i. Introduction (general information)
ii. Main data
iii. Technical description
iv. Preparation and installation instructions
v. Operating instructions
vi. Maintenance instructions
vii. Data sheets and spare parts
viii. Parts list and drawings
ix. Certificates are supplied as a separate file

Scope Of Delivery
Crane Body :
1. Pedestal as separate unit:
Internal stiffeners for transportation for pedestal of diameter > 2250 mm and
height > 2150 mm
2. Crane house as separate unit
3. Main boom as separate unit
4. Knuckle boom as separate unit
5. Main winch as separate unit
6. Wire rope as a separate unit
7. Loose gear and various ladders, platforms etc
8. Cylinders as separate units

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------------------------------------------
Search words :
Electro Hydraulic Knuckle Boom Offshore Crane for sale
30T Knuckle Boom Offshore Crane
Offshore 30Ton Offshore Knuckle Boom
30Ton Electro-Hydraulic Knuckle Boom Offshore Crane

Offshore Crane for sale - 30Tons
Offshore 30T Crane for offshore vessels for sale
30T Offshore Knuckle Boom Crane for sale

---------------------------------------------------------------------------------------------------

 
Harbour Crane for Sale
Worldoils Marketplace
Harbour Crane for Sale

Worldrigs ID: WR1303

Harbour Crane for Sale
Liebherr LHM 500 S Harbour Crane for Sale
Used Liebherr LHM 500 S Harbour Crane for sale


Specifications
16.000 hours

Four rope
YOM 2007
Available : July 2014

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

--------------------------------------------------------------------------------------------------------
Search words (for official use only) -
Harbour Crane for Sale
Liebherr LHM 500 S Harbour Crane for Sale
Used Liebherr LHM 500 S Harbour Crane for sale
2007 built Liebherr LHM 500 S Harbour Crane for Sale

-------------------------------------------------------------------------------------------------------

Hydra Marine 3568 AHC Crane
Worldoils Marketplace
Hydra Marine 3568 AHC Crane

Worldrigs ID: WR1925

Hydra Marine 3568 AHC Knuckle Boom Crane for Sale
Knuckle Boom Crane for Sale


Description :

2007 Hydra Marine Model 3568 AHC (Active Heave Compensated) Knuckle Boom Crane
It has a 150-ton load capacity.
The unit was placed in service in 2008, and has roughly 300 hours operating time

Price & terms : Please enquire using the email form below.
If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------------------
Search words(for official use only -
 
Hydra Marine Knuckle Boom Crane for Sale
150 Ton Capacity Crane for Sale
2007 Built Knuckle Boom Crane for Sale
Hydra Marine Model 3568 AHC Knuckle Boom Crane for Sale
Knuckle Boom Crane for Sale
-------------------------------------------------------------------------------------------------------



 
1998 Gottwald HMK 280E Mobile Harbour Crane for sale
Worldoils Marketplace
1998 Gottwald HMK 280E Mobile Harbour Crane for sale

Worldrigs ID: WR2199

Gottwald HMK 280E Mobile Harbour Crane for sale
1998 Built Gottwald HMK 280E Mobile Harbour Crane


Description
Used GOTTWALD Mobil Harbour Crane HMK 280 E with used
spreader make BROMMA type EH-170 Version 2-rope-version

Manufacturer GOTTWALD Type HMK 280 E
Year of construction 1998

Working hours engine : approx. ( new in 2012 ) 3.800 h
Working hours luffing : approx. 8.000 h
Working hours hoisting : approx. 10.000 h
Working hours slewing : approx. 30.000 h

Price & terms : Please enquire using the email form below.
If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


-------------------------------------------------------------------------------------------------------
Search words(for official use only) -
Gottwald HMK 280E Mobile Harbour Crane for sale
1998 Built Gottwald HMK 280E Mobile Harbour Crane
Used Mobile Harbour Crane for sale
G​ottwald Cranes for Sale - 1998 Built - For Sale
Mobile Harbour Crane for sale

------------------------------------------------------------------------------------------------------
 
400 tons Crane Barge for sale
Worldoils Marketplace
400 tons Crane Barge for sale

Worldrigs ID: WR1308

Offshore Crane Barge for sale
400 tons Crane Barge for sale
Revolving type DNV class 400 tons Crane Barge for sale


General
Class : Det Norske Veritas + 1A1 FAM, chain laying, crane and
salvage pontoon. Adment to register : Cra V for crane

Principal Dimensions
Length o.a. : 60 m
Lenght waterline : 50 m
Beam o.a. : 26 m
Max draught : 6 m
Draught hull : 4 m
Lifting capacity : 400 mt

Crane
Make : Liebherr 1500 LG, 400 mt revolving
Boom length : 45 or 80 m, telescopically extended
Main drums : 2 x 20 mt SLP, 1260 m / 38 mm dia. Wire
Main hooks : 200 mt or 400 mt with corresponding
max. speed 16,8 m per minute or 8,4 m per minute.
Aux. Hoist : 20 mt SLP with hook 40/20 mt,
hoist speed 0-100 m per minute
Power : Electro-hydraulic, 300 Kw-44 / 60 hz

Deckloading
Deck space : 676 m2 (26 m x 26 m)
Overall max uniform deck load : 7,5 t/m2

Heavy Lift Equipment
Puller : Clyde CLI 1100
Wire dia. : 115 mm
Max. Load in single line : 500 mt
Corresponding speed : 4.6 m per minutes
Max. Load in double line : 1000 mt
Corresponding speed : 2,3 m per minutes
Chain laying frame and stoppers for SWL 500 mt

Propulsion
2 retractable azimuth thrusters, situated starboard
side fwd. And port side aft.
Azimuth :
Aquamaster with Deutz diesels, type SBA6M816, 520 hp / 1800 rpm.

Generating plant
2 generator sets, each :
Alternator : Stamford MC634a, 290 Kw, 440-220V / 60 Hz.
Engine : Deutz diesel, SBA6M816, 421 hp / 1800 rpm.
Auxiliary : 50 Kw

Mooring and Deck Winches
Foredeck : 2 x 16 mt twin drum winches with warping head
After-deck : 2 x 12 mt twin drum winches with warping head
On rotating crane house : 2 x 5 mt winches with warping head

Deck equipment and features
- 220 mt shark jaw for chain hook-off and recovery
- 500 mt nose wheel
- Work truck, and various load handling equipment
- Misc. Shackles, chain, slings and wires for load handling

Navigation and communication
The bridge is fitted with complete navigation, internal and
external communication and control systems.
The position instrumentation includes DGPS and conmap systems.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words(for official use only) :
Offshore Crane Barge for sale
400 Tons Floating Crane Barge for sale
Crane Barge for sale
Revolving type DNV class 400 tons Crane Barge for sale
400 tons Crane Barge for sale
60M Crane Barge for sale

-----------------------------------------------------------------------------------------------------------------

Kobelco CKS800 Crawler Crane for sale
Worldoils Marketplace
Kobelco CKS800 Crawler Crane for sale

Worldrigs ID: WR1510

Kobelco CKS800 Crawler Crane for sale
80T Hydraulic Crawler Crane for sale


Main Specifications


Crane Boom
Max. Lifting Capacity : 80 t x 3.0 m
Max. Length : 54.9 m

Fixed Jib
Max. Lifting Capacity : 7.0 t x 20.0 m
Max. Combination : 42.7 m + 18.3, 45.7 m +12.2 m

Main & Aux. Winch
Max. Line Speed (1st layer) : 120 m/min
Rated Line Pull (Single line) : 78 kN {8 tf}
Wire Rope Diameter : 22 mm
Wire Rope Length : 220 m (Main), 130 m (Aux.)
Brake Type (free fall) : Wet-type multiple disc brake (Optional)

Working Speed
Swing Speed : 4.0 min-1{rpm}
Travel Speed : 1.7/1.1 km/h

Power Plant
Model : HINO J08E-VM
Engine Output : 213 kW/2,100 min-1
Fuel Tank : 400 liters

Hydraulic System

Main Pumps : 3 variable displacement
Max. Pressure : 31.9 MPa {325 kgf/cm2}
Hydraulic Tank Capacity : 440 liters
Self-Removal Device : Counterweight/self-removal device (Option)

Weight
Operating Weight : 75.1 t *1
Ground Pressure : 84.7 kPa
Counterweight : 27,200 kg
Transport Weight : 39,850 kg *2

Line speeds in table are for light loads. Line speed varies with load.
*1 Including upper and lower machine, 27.2 ton counterweight, 6.5 ton carbody
weight, basic boom, hook, and other accessories.
*2 Base machine with boom base, gantry, crawlers, and wire ropes (front/boom
hoist)

We also have used cranes.

Additional information regarding this equipment will be shown on request


Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------------------------
Search words(for official use only - 

Kobelco CKS800 Crawler Crane for sale
80T Hydraulic Crawler Crane for sale
Kobelco CKS800 80tons crawler crane
Kobelco CKS800 Hydraulic Crawler Crane for sale
Hydraulic Crawler Crane - Kobelco CKS800 - For Sale
80 Tons Kobelco CKS800 Hydraulic Crawler Crane for sale

----------------------------------------------------------------------------
 
Crane for Sale
Worldoils Marketplace
Crane for Sale

Worldrigs ID: WR534

Crane for Sale
J Frame ROV Handling Crane


Description
J frame ROV handling crane
Hydraulic power pack attached of dual electric 3phase 480 volt 50 HP with reservoir

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------------------------------------
Search words(for official use only) -  
Crane for Sale
Crane for sale with Hydraulic power pack attached 
J frame ROV Handling Crane for sale
ROV Handling Crane for sale

---------------------------------------------------------------------------------------------
 
49M Floating Crane for sale
Worldoils Marketplace
49M Floating Crane for sale

Worldrigs ID: WR2203

250T Floating crane for sale
1976 Built Self Propelled Floating Crane for Sale


Specifications

Class: BC * A2 - Self Propelled Floating Crane
Built: 1976
LOA: 49.70m
Breadth: 21.70m
Depth: 4.10m
Draft (Minimum): 2.28m
Draft (Maximum): 2.50m
Lifting Height (Principal): 37.00m
Lifting Height (Auxiliary): 39.00m
Free Deck Area: 208m2
 
Propulsion System
2 Schottel SRP 300, 405 KW each, 1 at bow and 1 at stern
 
Power Generation System
3 generator groups MTU + WEG 415 kva each
1 group auxiliary generator Cummins + WEG 82 kva
1 Muted Genset Caterpillar 750 kva
 
Service Tanks
Fresh Water: 28 litres
Diesel Oil: 56 litres
 
Accommodations
1 dressing room, 1 dining room, 2 cabins x 4 people,
3 cabins x 2 person, 1 cabin x 6 people, 1 kitchen and 1 office

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


--------------------------------------------------------------------------------------------------
Search words(for official use only) -
49M Floating Crane for sale
250T Floating crane for sale
1976 Built Self Propelled Floating Crane for Sale
Used Floating Crane for Sale
Self Propelled Floating Crane - 49M - For Sale

----------------------------------------------------------------------------------------------------
Newbuilding 100 tons non-AHC Knuckleboom Crane
Worldoils Marketplace
Newbuilding 100 tons non-AHC Knuckleboom Crane

Worldrigs ID: WR347

Newbuilding 100 tons non-AHC Knuckleboom Crane
100 tons non-AHC Knuckleboom Crane for sale

Specifications
- 100 tons 10 meters
- Built 2013 
- Class ABS
- Weight 125 tons
- 2 x 355 Kw electric motors power supply
- Max outreach 27 meters

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

------------------------------------------------------------------------------------------
Search words (for official use only) :
New non-AHC Knuckleboom Crane for sale
Non-AHC Knuckleboom Crane 2013 Built for sale
100 tons non-AHC Knuckleboom Crane for sale  in Far East Asia
Non-AHC Knuckleboom Crane for sale - Newbuilding
New 100T non-AHC Knuckleboom Crane for sale  in Far East Asia

------------------------------------------------------------------------------------------

 
2001 Gottwald HMK 300E Mobile Harbour Crane for sale
Worldoils Marketplace
2001 Gottwald HMK 300E Mobile Harbour Crane for sale

Worldrigs ID: WR2200

Gottwald HMK 300E Mobile Harbour Crane for sale
Used Mobile Harbour Crane for sale
2001 Built Gottwald HMK 300E - For Sale


Description
Used GOTTWALD Mobil harbour crane HMK 300 E with used
spreader make BROMMA type EH-170 Version 2-rope-version

Manufacturer GOTTWALD Type HMK 300 E
Year of construction 2001

Working hours engine : approx. (new in 2009) 6.300 h
Working hours luffing : approx. 7.000 h
Working hours hoisting : approx. 12.000 h
Working hours slewing : approx. 22.000 h

Price & terms : Please enquire using the email form below.
If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


-------------------------------------------------------------------------------
Search words(for official use only -
Gottwald HMK 300E Mobile Harbour Crane for sale
Mobile Harbour Crane for sale
2001 Built Gottwald HMK 300E Mobile Harbour Crane
G​ottwald Cranes for Sale - 2001 Built - For Sale
Used Mobile Harbour Crane for sale

-------------------------------------------------------------------------------
 
Kobelco 7250-2F Crawler Crane for sale
Worldoils Marketplace
Kobelco 7250-2F Crawler Crane for sale

Worldrigs ID: WR1504

Kobelco 7250-2F Crawler Crane for sale
250tons Crawler Crane for Sale


Specifications

Crane Boom
Max. Lifting Capacity : 250 t/4.6 m
Max. Length : 76.2 m

Long Boom
Max. Lifting Capacity : 37.5 t/14.4 m
Max. Length : 91.4 m

Fixed Jib
Max. Lifting Capacity : 22.7 t/15.0 m
Max. Combination : 76.2 m + 30.5 m

Tower Jib
Max. Lifting Capacity : 25.0 t/18.0 m
Max. Combination : 64.1 m + 51.8 m
Tower Angle : 60° ~ 90°

Main & Aux. Winch
Max. Line Speed : 110 m/min (1st layer)
Rated Line Pull (Single Line) : 132 kN {13.5 tf}
Wire Rope Diameter : 28 mm
Wire Rope Length : 390 m (Main) 220 m (Aux.)
Brake Type : Spring-set hydraulically released (Negative)
Free-Fall Brake Type : Wet-type multiple disc brake (Optional)

Working Speed

Swing Speed : 2.2 min-1 {rpm}
Travel Speed : 1.1/0.7 km/h

Power Plant
Model : Hino P11C-UN
Engine Output : 247 kW/2,000 min-1 {rpm}
Fuel Tank Capacity : 400 liters

Hydraulic System
Main Pumps : 4 variable displacement
Max. Pressure : 31.9 MPa {325 kgf/cm2}
Hydraulic Tank Capacity : 600 liters

Weight
Operating Weight* : Approx. 211 t
Ground Pressure* : 122 kPa {1.25 kgf/cm2}
Counterweight : 97.1 t (Upper), 20.0 t (Lower)
Transport Weight** : 44.5 t

* Including upper and lower machine, 97.1 ton counterweight and 20.0 ton
carbody weight, basic boom, hook, and other accessories.

**Base machine with boom base, carbody, gantry, trans-lifter, lower spreader, upper spreader,
main and aux. winches including wire rope, and boom hoist winch including wire rope.

We also have used cranes.

Additional information regarding this equipment will be shown on request


Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------------------
Search words(for official use only - 

Kobelco 7250-2F Crawler Crane for sale
250tons Crawler Crane for Sale
Hydraulic Crawler Crane for Sale
Kobelco 7250-2F Hydraulic Crawler Crane for sale
250T Hydraulic Crawler Crane for Sale
Crawler Crane - Kobelco 7250-2F - For Sale

-----------------------------------------------------------------------------
AHC Offshore Knuckle-Boom Crane
Worldoils Marketplace
AHC Offshore Knuckle-Boom Crane

Worldrigs ID: WR1930

24 Tons AHC Offshore Knuckle-Boom Crane for Sale
New Offshore Knuckle-Boom Crane


Description :

Built 2010, never used
12 tons / 7 meters single fall: 24 tons / 7 meters double fall
Max radius 19 meters
2300 meters depth
BV and DNV certified
AHC and constant tension
Man riding and ship‐to‐ship transfers

Price & terms : Please enquire using the email form below.
If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------------------
Search words(for official use only - 
24 Tons AHC Offshore Knuckle-Boom Crane in Europe
2010 Built Offshore Knuckle-Boom Crane 
Unused Offshore Crane for Sale
24T Knuckle-Boom Crane For Sale in Europe
New 24 tons AHC Offshore Knuckle-Boom Crane
-------------------------------------------------------------------------------------------------------



 

 
Mobile Harbour Crane for Sale
Worldoils Marketplace
Mobile Harbour Crane for Sale

Worldrigs ID: WR1114

Liebherr Mobile Harbour Crane for Sale
2009 Built LHM 400 Mobile Harbour Crane 


Description
:

1 Liebherr Mobile harbour crane Type LHM 400 Litronic

Manufacturer : Liebherr
Type : LHM 400
Year of construction : 2009
 

Crane is appropriate for general cargo handling, spreader- and motorgrap-operation
Version 2-rope-version

Capacity max. approx. : 
104,0 t to 22 m
52,8 t to 38 m
37,9 t to 48 m

Capacity motor-grap-operation :
43,3 t to 34 m
27,0 t to 48 m

Outreach approx. : 10 - 48,0 m
Lifting height max. approx. : 45,0 m

Lifting gear approx. : 0,0-90,0 m/min
Rotating gear approx. : 0,0-1,6 U/min
Luffing gear approx. : 55 sec
Crane travelling gear approx. : 0,0-90,0 m/min
Total weight approx. : 390 t
Price within BROMMA-spreader & SMAG-grab ( 17m³)

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

--------------------------------------------------------------------------------------------------------
Search words -

Mobile Harbour Crane for Sale
Liebherr LHM 400 Mobile Harbour Crane for Sale
Liebherr Crane for Sale
2009 Built Mobile Harbour Crane
LHM 400 Mobile Harbour Crane for Sale
--------------------------------------------------------------------------------------------------------

 
2001 G​ottwald HMK 300E crane for Sale
Worldoils Marketplace
2001 G​ottwald HMK 300E crane for Sale

Worldrigs ID: WR1926

G​ottwald HMK 300E Crane for Sale
1998 Built
G​ottwald HMK 280E Crane for Sale
2 G​ottwald Cranes for Sale


Description :

2001 G​ottwald HMK 300E crane 
1998  G​ottwald HMK 280 crane

The engine in the 300E was replaced in 2009 and the 
engine on the HMK 280 was replaced in 2012. In both units, 
Cumins replaced the original 16V GE engine with 
COMPLETELY NEW, more powerful Cumins engine. 
Neither are a rebuild.​

Both of our HMK 280 and 300 Gottwald Crane models 
are two-wire machines and include 20’-40’ spreaders. 
To work with containers, the spreader can be utilized and 
the hook can be used to work with general cargo. 
The machines do not include hydraulic clamshells.

Hours on HMK 300: 6159
Hours on HMK 280: 3800

Price & terms : Please enquire using the email form below.
If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------------------
Search words(for official use only - 
G​ottwald HMK 300E & HMK 280 Cranes for Sale
2001 Built
G​ottwald HMK 300E Crane
1998 Built
G​ottwald HMK 280 Crane
G​ottwald Cranes for Sale
G​ottwald HMK 300E Crane for Sale
HMK 280 Crane for Sale
-------------------------------------------------------------------------------------------------------


 
5 Ton Knuckle Boom Crane for Sale
Worldoils Marketplace
5 Ton Knuckle Boom Crane for Sale

Worldrigs ID: WR1492

5 Ton Knuckle Boom Offshore Crane for Sale
New Offshore Crane for Sale


Significant wave height (m) / SWL (kg)

0.5 / 3700
1.0 / 3000
2.0 / 1800
3.0 / 1000
4.0 / 700

Conditions / SWL (kg)
Harbour / 2000
Offshore, Hsig = 0.5 / 1600
Offshore, Hsig = 1.5 / 1300
Offshore, Hsig = 2.5 / 900

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.
The details mentioned above are believed to be accurate but are not guaranteed.


-----------------------------------------------------------------------------------------
Search words(for official use only)-
5 Ton Knuckle Boom Offshore Crane for Sale
New Offshore Crane for Sale
5 Ton Offshore Knuckle Boom Crane for Sale
Offshore Knuckle Boom Crane for Sale
New Knuckle Boom Offshore Crane

-----------------------------------------------------------------------------------------
 
Kobelco 7120S Crawler Crane for sale
Worldoils Marketplace
Kobelco 7120S Crawler Crane for sale

Worldrigs ID: WR1503

Kobelco 7120S Crawler Crane for sale
120T Kobelco 7120S Crawler Crane for Sale


Main Specifications

Crane Boom
Max. Lifting Capacity : 120 t x 5.0 m
Max. Length : 61.0 m

Fixed Jib

Max. Lifting Capacity : 12.0 t x 28.0 m
Max. Combination : 61.0 m + 30.5 m

Long Boom
Max. Lifting Capacity : 24.0 t x 16.0 m
Max. Length : 79.2 m

Tower Jib
Max. Jib Length : 44.2 m
Max. Combination : 51.7 m + 44.2 m

Main & Aux. Winch

Max. Line Speed (1st layer) : 120 m/min
Rated Line Pull (Single line) : 118 kN {12.0 tf}
Wire Rope Diameter : 26 mm
Wire Rope Length : 275m (Main), 255 m (Aux.)
Brake Type (Free fall) : Wet-type multiple disc brake (Optional)

Working Speed
Swing Speed : 2.1 min-1{rpm}
Travel Speed : 1.3/0.9 km/h

Power Plant

Model : HINO P11C-VH
Engine Output : 271 kW/1,850 min-1
Fuel Tank : 400 liters

Hydraulic System
Main Pumps : 4 variable displacement
Max. Pressure : 31.9 MPa {325 kgf/cm2}
Hydraulic Tank Capacity : 535 liters
Self-Removal Device : NA

Weight

Operating Weight : 120 t *1
Ground Pressure : 93.6 kPa
Counterweight : 53,110 kg
Transport Weight : 34,800 kg *2

*1 Including upper and lower machine, 53.1 ton counterweight, basic boom, hook,
and other accessories.
*2 Base Machine with boom base gantry, wire ropes (front/rear/boom hoist)

We also have used cranes.

Additional information regarding this equipment will be shown on request


Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------------------
Search words(for official use only - 

Kobelco 7120S Crawler Crane for sale
120T Kobelco 7120S Crawler Crane for Sale
Hydraulic Crawler Crane - Kobelco 7120S - for sale
120 Tons Hydraulic Crawler Crane for sale

-----------------------------------------------------------------------------
 
Tadano GR600EX Rough Terrain Crane for sale
Worldoils Marketplace
Tadano GR600EX Rough Terrain Crane for sale

Worldrigs ID: WR1514

Tadano GR600EX Rough Terrain Crane for sale
60,000kg Rough Terrain Crane For Sale


General Data
Crane Capacity : 60,000 kg at 3.0 m
Boom : 5-section, 11.0 m - 43.0 m

Dimension

Overall length : approx. 13,380 mm
Overall width : approx. 3,315 mm
Overall height : approx. 3,790 mm

Mass
Gross vehicle mass : approx. 43,735 kg
- front axle : approx. 21,555 kg
- rear axle : approx. 22,180 kg

Performance
Max. travelling speed : computed 36 km/h
Gradeability(tan ) :
computed 147 % (at stall)
*30%

*Machine should be operated within the limit of engine crankcase
design (17˚ : MITSUBISHI 6M60-TL)

Additional information regarding this equipment will be shown on request

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------------------------
Search words(for official use only - 

Tadano GR600EX Rough Terrain Crane for sale
Rough Terrain Crane - Tadano GR600EX - for sale
60,000kg Rough Terrain Crane For Sale
Tadano GR600EX Hydraulic Rough Terrain Crane for sale
60,000kg Hydraulic Rough Terrain Crane for Sale

----------------------------------------------------------------------------
 
 Kobelco CKE1350-1F Crawler Crane for Sale
Worldoils Marketplace
 Kobelco CKE1350-1F Crawler Crane for Sale

Worldrigs ID: WR1507

Kobelco CKE1350-1F Crawler Crane for Sale
135 Tons Kobelco CKE1350-1F Crawler Crane for Sale


Main Specifications

Crane Boom
Max. Lifting Capacity 135 t/4.5 m
Max. Length 76.2 m

Luffing Boom
Max. Lifting Capacity 80 t/8.0 m
Max. Length 47.9 m

Long Boom
Max. Lifting Capacity 44.3 t/10.6 m
Max. Length 82.3 m

Fixed Jib
Max. Lifting Capacity 26.8 t/16.0 m
Max. Length 30.5 m
Max. Combination 61.0 m + 30.5 m

Luffing Jib
Max. Lifting Capacity 36 t/12.0 m
Max. Combination 47.9 m + 32.0 m, 44.8 m + 53.3 m

Main & Aux. Winch
Max. Line Speed 120 m/min (1st layer)
Rated Line Pull (Single Line) 132 kN {13.5 tf}
Wire Rope Diameter 26 mm
Wire Rope Length 275 m (Main) 255 m (Aux.)
Brake Type Spring-set hydraulically released (Nagative)
Free-Fall Brake Type Wet-type multiple disc brake (Optional)

Working Speed
Swing Speed 2.1 min-1 {rpm}
Travel Speed 1.3/0.9 km/h

Power Plant
Model Hino P11C-UN
Engine Output 247 kW/2,000 min-1 {rpm}
Fuel Tank Capacity 400 liters

Hydraulic System
Main Pumps 4 variable displacement
Max. Pressure 31.9 MPa {325 kgf/cm2}
Hydraulic Tank Capacity 535 liters
Self-Removal Device Standard counterweight removal

Weight
Operating Weight* Approx. 136 t
Ground Pressure* 106 kPa {1.08 kgf/cm2}
Counterweight 53.0 t (Upper), 10.0 t (Lower)
Transport Weight** Approx. 39.7 t

* Including upper and lower machine, 53.0 ton counterweight and 10.0 ton
carbody weight, basic boom, hook, and other accessories.
** Base machine with trans-lifter, 70 t hook, main and aux. winches (non-free fall)
including wire rope, self removal device.

We also have used cranes.

Additional information regarding this equipment will be shown on request


Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------------------------
Search words(for official use only - 

Kobelco 7250S Crawler Crane for sale
250T Kobelco 7250S Crawler Crane for sale
Hydraulic Crawler Crane for sale
Kobelco 7250S Hydraulic Crawler Crane for sale
Crawler Crane - 250 Tons - for sale
250Tons Kobelco 7250S Crawler Crane for sale

----------------------------------------------------------------------------
Kobelco CKE1800-1F Crawler Crane for sale
Worldoils Marketplace
Kobelco CKE1800-1F Crawler Crane for sale

Worldrigs ID: WR1508

Kobelco CKE1800-1F Crawler Crane for sale
180tons Kobelco CKE1800-1F Crawler Crane for sale


Main Specifications


Heavy Duty Crane Boom
Max. Lifting Capacity : 180 t/3.75 m
Max. Length : 42.7 m

Crane Boom
Max. Lifting Capacity : 160 t/4.4 m
Max. Length : 85.3 m

Luffing Boom
Max. Lifting Capacity : 110 t/5.2 m
Max. Length : 54.9 m

Long Boom
Max. Lifting Capacity : 40.1 t/12.0 m
Max. Length : 85.3 m

Fixed Jib
Max. Lifting Capacity : 26.8 t/15.2 m
Max. Length : 30.5 m
Max. Combination : 73.2 m + 30.5 m

Luffing Jib

Max. Lifting Capacity :48.6 t/9.14 m
Jib Length : 21.3 m ~ 51.8 m
Max. Combination : 54.9 m + 51.8 m
Luffing Angle : 60° ~ 88°

Working Speed
Swing Speed : 2.6 min-1 {rpm}
Travel Speed : 1.1/0.7 km/h

Power Plant
Model : Hino P11C-UN
Engine Output : 247 kW/2,000 min-1 {rpm}
Fuel Tank Capacity : 400 liters

Main & Aux. Winch

Max. Line Speed : 100 m/min (1st layer)
Rated Line Pull : 132 kN {13.5 tf}
Wire Rope Diameter : 25.4 mm
Wire Rope Length : 430 m (Main) 335 m (Aux.)
Brake Type : Spring set hydraulically released (Negative)
Free Fall Brake : Wet-type multiple disc brake (Optional)

Hydraulic System

Pumps : 4 variable displacement
Max. Pressure : 31.9 MPa {325 kgf/cm2}
Hydraulic Tank Capacity : 550 liters
Self Erection Device : Standard

Weight
Operating Weight* : Approx. 164 t
Ground Pressure* : 103 kPa {1.06 kgf/cm2}
Counterweight : 60.0 t (Upper), 20.0 t (Lower)
Transportation Weight** : Approx. 44.0 t

* Including upper and lower machine, 60.0 ton counterweight, 20.0 ton carbody
weight, basic boom, hook, and other accessories.
** Base machine with boom base, trans-lifter, main and aux. winches (non-freefall)
including wire rope, self removal device.

We also have used cranes.

Additional information regarding this equipment will be shown on request


Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------------------------
Search words(for official use only - 

Kobelco CKE1800-1F Crawler Crane for sale
180tons Kobelco CKE1800-1F Crawler Crane for sale
Hydraulic Crawler Crane for Sale
180T Kobelco CKE1800-1F Crawler Crane for sale
Kobelco CKE1800-1F 180 Tons Crawler Crane for sale
Hydraulic Crawler Crane - Kobelco CKE1800-1F - for sale

----------------------------------------------------------------------------
 
 
Manitowoc 12000 Crawler Crane for sale
Worldoils Marketplace
Manitowoc 12000 Crawler Crane for sale

Worldrigs ID: WR1512

Manitowoc 12000 Crawler Crane for sale
120T Manitowoc 12000 Crawler Crane for sale


Features
• 110 t (120 USt) Lift Capacity
• 397 mton-m (2,880 ft-kips) Maximum Load Moment
• 70,1 m (230 ft) Heavy-Lift Boom
• 82,3 m (270 ft) Fixed Jib on Heavy-Lift Boom
• 94,5 m (310 ft) Luffing Jib on Heavy-Lift Boom
• 247 kW (332 HP) engine
• 163 mpm (535 fpm) line speed
• 21 180 kg (46,700 lb) Maximum Line Pull
• 11 400 kg (25,100 lb) Rated Line Pull
• 10 000 kg (25,000 lb) Material Rehandling Clamshell capacity
• Fast, efficient self-assembly and disassembly
• Manitowoc Crane CARE comprehensive support

Engine
Hino P11C-UN, 6 cylinder, water-cooled diesel, direct fuel injection with
turbocharger, 247 kW (332 HP) at 2000 high-idle RPM. Maximum torque
1300 N•m (959 lb•ft) net at 1,500 rpm (SAE J 1349).

One diesel fuel tank, 400 liters (105 gallons) capacity.

Two 12 volt 136 AH capacity batteries, 24 volt system and 50 amp alternator.
All wiring harnesses and connectors are numbered for easier servicing. Machine
is equipped with individual fused branch circuits.

Controls
Full-flow hydraulic control system for constant variable pressure to front and rear
drums, boom hoist brakes and clutches. Controls respond instantly to the touch,
delivering smooth function operation.

Relief valve pressures :
Load hoist, boom hoist and propel system . . .  315kg/cm2 (4,480 psi)
Swing system . . . 280 kg/cm2, (3,980psi)
Control system . . .  80 kg/cm2 (1,140 psi)

Additional information regarding this equipment will be shown on request

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------------------------
Search words(for official use only - 

Manitowoc 12000 Crawler Crane for sale
120T Manitowoc 12000 Crawler Crane for sale
Crawler Crane for sale
120 Tons Crawler Crane for Sale

----------------------------------------------------------------------------
Manitowoc 8500-1 Crawler Crane for Sale
Worldoils Marketplace
Manitowoc 8500-1 Crawler Crane for Sale

Worldrigs ID: WR1513

Manitowoc 8500-1 Crawler Crane for Sale
80tons Crawler Crane for Sale


Features
80t Capacity
61m (200ft) heavy-lift boom
Max. boom + jib combination : 54.9m (180ft) + 18.3m (60ft)
213kW (285hp) egine
160m/min (525 fpm) maximum line speed
75.6 kN (17,000 lb) rated line pull

Additional information regarding this equipment will be shown on request

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------------------------
Search words(for official use only - 

Manitowoc 8500-1 Crawler Crane for Sale
80tons Crawler Crane for Sale
Manitowoc 8500-1 80 Tons Crawler Crane for Sale
Crawler Crane Manitowoc 8500-1 for Sale
80T Manitowoc 8500-1 Crawler Crane

----------------------------------------------------------------------------
 
Tadano GR800EX Rough Terrain Crane for sale
Worldoils Marketplace
Tadano GR800EX Rough Terrain Crane for sale

Worldrigs ID: WR1515

Tadano GR800EX Rough Terrain Crane for sale
Rough Terrain Crane - Tadano GR800EX - for sale


General Data
Crane Capacity : 80,000 kg at 3.0 m
Boom : 5-section, 12.0 m - 47.0 m

Dimension
Overall length : approx. 14,375 mm
Overall width : approx. 3,315 mm
Overall height : approx. 3,795 mm

Mass
Gross vehicle mass : approx. 51,410 kg
- front axle : approx. 24,325 kg
- rear axle : approx. 27,085 kg

Performance
Max. travelling speed : computed 36 km/h
Gradeability(tan ) :
computed 94 % (at stall)
*30 %

*Machine should be operated within the limit of engine crankcase
design (17˚ : MITSUBISHI 6M60-TL)

Additional information regarding this equipment will be shown on request

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------------------------
Search words(for official use only - 

Tadano GR800EX Rough Terrain Crane for sale
Rough Terrain Crane - Tadano GR800EX - for sale
80,000kg Rough Terrain Crane For Sale
Tadano GR800EX Hydraulic Rough Terrain Crane for sale
80,000kg Hydraulic Rough Terrain Crane for Sale

----------------------------------------------------------------------------
 
 Kobelco CKS1100 Crawler Crane for sale
Worldoils Marketplace
 Kobelco CKS1100 Crawler Crane for sale

Worldrigs ID: WR1511

Kobelco CKS1100 Crawler Crane for sale
110tons Kobelco CKS1100 Crawler Crane for sale


Main Specifications

Crane Boom
Max. Lifting Capacity 110 t x 3.6 m *3
Max. Length 70.1 m

Fixed Jib
Max. Lifting Capacity 10.9 t x 22.0 m
Max. Combination 61.0 m + 21.3 m

Main & Aux. Winch
Max. Line Speed (1st layer) 120 m/min
Rated Line Pull (Single line) 108 kN {11.0 tf}
Wire Rope Diameter 26 mm
Wire Rope Length 265m (Main), 235 m (Aux.)
Brake Type (free fall) Wet-type multiple disc brake (Optional)

Working Speed

Swing Speed 3.2 min-1{rpm}
Travel Speed 1.4/1.0 km/h

Power Plant
Model HINO J08E-VM
Engine Output 213 kW/2,100min-1
Fuel Tank 400 liters

Hydraulic System

Main Pumps 4 variable displacement
Max. Pressure 31.9 MPa {325 kgf/cm2}
Hydraulic Tank Capacity 535 liters
Self-Removal Device : Counterweight/crawler self-removal device

Weight

Operating Weight 102 t *1
Ground Pressure 95.4 kPa
Counterweight 34,600 kg
Transport Weight 57,410 kg *2

*1 Including upper and lower machine, 34.6 ton counterweight, 6.5 ton
carbody weight, basic boom, hook, and other accessories.
*2 Base machine with boom base, gantry, crawlers, and wire ropes
(front/boom hoist)
*3 Auxiliary sheave is must.

We also have used cranes.

Additional information regarding this equipment will be shown on request


Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------------------------
Search words(for official use only - 

Kobelco CKS1100 Crawler Crane for sale
110tons Kobelco CKS1100 Crawler Crane for sale
110T Kobelco CKS1100 Crawler Crane for sale
Hydraulic Crawler Crane - 110 Tons - for Sale
Kobelco CKS1100 Hydraulic Crawler Crane for sale
110T Crawler Crane for Sale

----------------------------------------------------------------------------
Deck Crane for Sale
Worldoils Marketplace
Deck Crane for Sale

Worldrigs ID: WR2024

Offshore Crane for Sale or Rental
2008 Built Deck Crane for Sale


Description :

This crane was manufactured in 2008 by U.S. manufacturer 
GoodCrane, Houston Texas for installation on offshore support 
vessel. Due to cancelled project, the crane was stored unused.
The crane have been upgraded after storage, and is offered as 
described below for sale or rental:

Main technical data :
Equipment / zone area : Electro hydraulic offshore crane / to be 
used in safe zone
Model : 65.62KSC11020 Knuckle boom

SWL all radius : 5 Ton Dynamic
Crane design standard : ABS guide for lifting appliances 2007 and API spec. 2C 6TH Ed
Pedestal  :
Included (1220 mm OD x 1,05 meter height
Optional pedestal installation with additional 2,25 meter height

Outreach max. / min. : 20 / 6 meter
Wire on winch : 1 1/8” dia x 90 meter
Main hook lifting speed : 45 m/min (at 5 Ton)
Slewing speed : 0 – 1 rpm

Slewing rotation : 360 degrees continuous
Main boom hydraulic cylinders : Dual with built in safety valve

Knuckle hydraulic cylinder : Single with built in safety valve
Hydraulic power unit : 100 HP, 690 Volt 3 phase 60 hz
Limit switch, overload protection Included

Digital load cell : Included with read out in cabin
Operators cabin : Included with operator seat, joystick 
controls, heater, etc.
Surface coating : Manufacturers offshore spec.
Crane and pedestal weight : Approx 25 Ton
Present location : Western coast of Norway

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------
Search words (for official use only) :

Electro Hydraulic Offshore Crane for Sale 
65.62KSC11020 Knuckle boom Crane for Rental Services
2008 Built Offshore Crane
Crane for Sale or Rental in Norway
Deck Crane - 2008 Built for Sale

-------------------------------------------------------------------------------------------------------------------

 
Kobelco CKE4000C Crawler Crane for Sale
Worldoils Marketplace
Kobelco CKE4000C Crawler Crane for Sale

Worldrigs ID: WR1509

Kobelco CKE4000C Crawler Crane for Sale
400 Tons Kobelco CKE4000C 400tons Crawler Crane


Specifications

Standard Crane

Max. Lifiting Capacity : 350t / 6.0m
Boom Length : 18m to 78m

HL Crane
Max. Lifiting Capacity : 350t/7.0m
Boom Length : 30m to 84m

SHL Crane
Max. Lifiting Capacity : 350t/12.0m
Boom Length : 30m to 84m

Light-Duty Crane
Max. Lifiting Capacity : 113.5t/14.0m
Boom Length : 30m to 96m

Luffing Jib
Max. Lifting Capacity : 113.5t/16.0m
Max. Combination : 66m + 66m/72m + 54m

HL Luffing Jib
Max. Lifting Capacity : 113.5t/16.0m
Max. Combination : 72m + 66m/78m + 54m

SHL Luffing Jib
Max. Lifting Capacity : 113.5t/16.0m
Max. Combination : 78m + 66m/84m + 54m

Main & Aux. Winch
Max. Line Speed : 130m/min (5th layer)
Wire Rope : 28mm
Brake Type : Spring set hydraulically release brake

Working Speed
Swing Speed : 1.3 min (rpm)
Travel Speed : 1.0/0.4 km/h

Power Plant
Model : HINO K13C-UV
Engine Output : 295kW/2,000min (rpm)
Fuel Tank Capacity : 600 litres

Hydraulic System
Main Pumps : 6 variable displacement pump
Max. Pressure : 31.9 MPa (325 kgf/sq.cm)
Self-Erection Device : Option

Weight
Operating Weight : Approx.346t
Counterweight : std.120t (Upper) + 41t (Lower)
Transport Weight : 60.0t (Main machine)
Ground Pressure : 150 kPa (1.52 kgf/sq.cm)

We also have used cranes.

Additional information regarding this equipment will be shown on request


Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------------------------
Search words(for official use only - 

Kobelco CKE4000C Crawler Crane for Sale
400 Tons Kobelco CKE4000C 400tons Crawler Crane
Crawler Crane - 400 Tons - for sale
400T Crawler Crane for Sale
Kobelco CKE4000C 400T Crawler Crane for Sale
Hydraulic Crawler Crane for Sale

----------------------------------------------------------------------------
 
Kobelco 7120-2F Crawler Crane for sale
Worldoils Marketplace
Kobelco 7120-2F Crawler Crane for sale

Worldrigs ID: WR1502

Kobelco 7120-2F Crawler Crane for sale
120T Hydraulic Crawler Crane for Sale


Main Specifications

Crane Boom
Max. Lifting Capacity : 120 t/5.0 m
Max. Length : 61.0 m

Long Boom
Max. Lifting Capacity : 24 t/16.0 m
Max. Length : 79.2 m

Fixed Jib
Max. Lifting Capacity : 12 t/28.0 m
Max. Combination : 61.0 m + 30.5 m

Tower Jib
Max. Lifting Capacity : 20 t/15.0 m
Max. Combination : 51.7 m + 44.2 m
Tower Angle : 60° ~ 90°

Main & Aux. Winch
Max. Line Speed : 120 m/min (1st layer)
Rated Line Pull (Single-line) : 118 kN {12.0 tf}
Wire Rope Diameter : 26 mm

Wire Rope Length :
Crane - 275 m (Main) 255 m (Aux.)
Tower - 290 m (Main) 145 m (Aux.)

Brake Type :
Spring set hydraulically released multiple disc brake(Negative)

Free-Fall Brake Type : Wet-type multiple disc brake (Optional)

Working Speed
Swing Speed : 2.1 min-1 {rpm}
Travel Speed : 1.3/0.9 km/h

Power Plant
Model Hino P11C-UN
Engine Output : 247 kW/2,000 min-1 {rpm}
Fuel Tank Capacity : 400 liters

Hydraulic System
Main Pumps : 4 variable displacement
Max. Pressure : 31.9 MPa {325 kgf/cm2}
Hydraulic Tank Capacity : 535 liters

Weight
Operating Weight* : Approx.120 t
Ground Pressure* : 94 kPa {0.96 kgf/cm2}
Counterweight : 52.3 t
Transport Weight** : Approx. 36.8 t

* Including upper and lower machine, 52.3 ton counterweight, basic boom, hook,
and other accessories.
** Base machine with boom base, gantry, carbody, lower spreader and upper
spreader.

We also have used cranes.

Additional information regarding this equipment will be shown on request


Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------------------
Search words(for official use only - 

Kobelco 7120-2F Crawler Crane for sale
Hydraulic Crawler Crane - 120T - for sale
120tons Kobelco 7120-2F crawler crane for Sale
Crawler Crane - Kobelco 7120-2F - For Sale
Kobelco 7120-2F 120 Tons Crawler Crane for sale
120T Kobelco 7120-2F Hydraulic Crawler Crane for sale

-----------------------------------------------------------------------------
CKE2500 Kobelco Crawler Crane for sale
Worldoils Marketplace
CKE2500 Kobelco Crawler Crane for sale

Worldrigs ID: WR1501

CKE2500 Kobelco Crawler Crane
Hydraulic Crawler Crane for sale
250T CKE2500 Kobelco Crawler Crane


Specifications


Main Boom
Max. Lifting Capacity : 250 t/4.0 m
Max. Length : 91.4 m

Fixed Jib
Max. Lifting Capacity : 26.8 t/9.8 m
Max. Combination : 76.2 m + 30.5 m

Luffing Jib
Max. Lifting Capacity : 70 t/9.8 m
Max. Combination : 61.0m + 51.8 m, 51.8 m + 61.0 m
Luffing Angle : 63° ~ 88°

Main & Aux. Winch
Max. Line Speed : 110 m/min (1st layer)
Rated Line Pull : 132 kN (13.5 tf)
Max. Line Pull : 245 kN (25 tf)
Wire Rope : 25 mm
Wire Rope Length : 480 m (Main) 385 m (Aux.)
Brake Type : Wet-type multiple disc brake
Free-Fall : Option

Working Speed
Swing Speed : 2.1 min-1 (rpm)
Travel Speed : 1.1/0.7 km/h

Power Plant
Model : Mitsubishi 6D24-TLU2D
Engine Output : 235 kW/2,000 min-1 (rpm)
Fuel Tank Capacity : 400 liters

Hydraulic System

Main Pumps : 4 variable displacement
Max. Pressure : 30.9 MPa (315 kgf/sq.cm)
Hydraulic Tank Capacity : 550 liters
Self-Erection Device : Standard

Weight

Operating Weight : Approx. 208 t
Counterweight : 80.6 t (Upper), 20.0 t (Lower)
Transport Weight : 44.9 t (Main machine)
Ground Pressure : 95 kPa (0.97 kgf/sq.cm)

We also have used cranes.

Additional information regarding this equipment will be shown on request


Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------------------
Search words(for official use only - 

CKE2500 Kobelco Crawler Crane for sale

CKE2500 Kobelco Hydraulic Crawler Crane for sale
250 Tons Kobelco Crawler Crane for Sale

Hydraulic Crawler Crane for sale
250T CKE2500 Kobelco Crawler Crane for sale

-----------------------------------------------------------------------------
 
3T Knuckle Boom Crane for Sale
Worldoils Marketplace
3T Knuckle Boom Crane for Sale

Worldrigs ID: WR242

3T Knuckle Boom Crane for Sale
Small Knuckle Boom Crane

Description :

Crane type : RC 40-EH-10,8/6,2-15M-3T/9m-5T-RC
Safe working load : 3 T
Max working radius : 15m
Max working radius : 2,1m
 
Safe working load : 5 T
Max working radius : 9m
Max working radius : 2,1m
 
Pump capacity : 105 1/min
Hoisting speed : 30m/min
Slew sector : 360o
Slew speed : 1 rpm
List + Trim : 5o + 2o
 
Electric Motor Data
Electric motor type
Voltage : 690V/60Hz
Heating element : 1x40W
Power/Duty : 37,2 kW/S6-40%
Motor speed : 1750rpm
Rotation (seen from fan end) : Right
Motor start method : D.O.L
Nominal current : In=40A
Start current : Is=202,8A
 
Weight and Outline Dimensions :
Total weight : ~ 10200 kg
Outline dimensions of crane
General arrangement drawing G-9611
Assembly drawing S-9312
 
Price & terms : Please enquire using the email form below.
If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------------
Search words(for official use only) :
Knuckle Boom Crane for Sale
Ofshore Knuckle Boom Crane
Small Knuckle Boom Crane 
3T Knuckle Boom Crane for Sale
Small Ofshore Knuckle Boom Crane 
-----------------------------------------------------------------------------------------

 
National OS-435 H.D model Pedestal Offshore Crane
Worldoils Marketplace
National OS-435 H.D model Pedestal Offshore Crane

Worldrigs ID: WR1485

Offshore Pedestal Crane for Sale
OS-435 Refurbished Offshore Pedestal Crane for sale


The crane is completely refurbished and complies with API-2C

Specifications


• Hydraulic pedestal crane model : National OS-435 H.D
• Original year of manufacture : 1981
• Boom length : 42.675m (140ft)
• Weight : 105,400 Lbs / 47, 810Kg (incl. Boom)
• Main hoist capacity : 28,875Kg @ 19.5m (platform duty)
• Whip hoist capacity : 7,275Kg @ 46.5m (platform duty)

Overhaul included :
- Full engine overhaul including Dyno Test
- Triple Gearbox refurbished
- Booms & A-frame blasted, painted & NDT inspection completed
- Bridle Assembly inspected and NDT
- All sheaves & shafts inspected and NDT
- Slew bearing refurbished and NDT
- Boom, Main and Whip rope winches inspected
- Brake band linings renewed
- All brake cylinders refurbished and pressure tested including Pawl cylinder
- Installation of slewing limit swit ches (change to original (OEM) spec)
- New hydraulic hoses installed and pressure tested
- Hydraulic pumps and motors refurbished and performance tested
- New wire ropes (Main & Whip hoist) and Pendant lines installed
- Refurbished operators cabins with new gauges , and air conditioning unit
- New Mipeg Rated Capacity Indicator (RCI) System
- Painted to marine specification

• Rated for Zone 2 safe operations
• MOM certified (Singapore Ministry of Manpower)
• All structural inspection reports available
• Installation / change out services available

Available Immediately

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------------
Search words (for official use only)
Offshore Pedestal Crane for Sale
National OS-435 H.D model Pedestal Offshore Crane - For Sale
140ft Offshore Pedestal Crane for Sale
Refurbished Offshore Pedestal Crane for Sale
1981 built Offshore Pedestal Crane
National OS-435 Refurbished Offshore Pedestal Crane for sale

---------------------------------------------------------------------------------------------------------------

Gottwald Crane RG912
Worldoils Marketplace
Gottwald Crane RG912

Worldrigs ID: WR1928

Gottwald model RG912 Crane for Sale
1200 Metric Ton
Gottwald Crane

Description :

We have a 1200 metric ton capacity Gottwald crane, 
model RG912, for sale in the Middle East.

Price & terms : Please enquire using the email form below.
If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------------------
Search words(for official use only - 
Gottwald model RG912 Crane for Sale
RG912 Model Crane for Sale
1200 Metric Ton Gottwald Crane for Sale
Gottwald model RG912 Crane for Sale
Gottwald Crane for Sale in Middle East
-------------------------------------------------------------------------------------------------------


 
Liebherr Offshore crane for Sale
Worldoils Marketplace
Liebherr Offshore crane for Sale

Worldrigs ID: WR1491

Liebherr Offshore Crane for Sale
BOS 2600-65D Litronic - Crane for Sale


Description


Quantity : 1
Specification (API, etc) : 1204 HP 335
Make : Liebherr
Type : BOS- 2600-65D Litronic

Location (stbd, port, aft, frwd) : Port-Forward
Boom Length (ft) : 45.71m (150 ft)
Block capacities and hoisting speeds : Onboard transfer load rating
Load/radius/speed - minimum radius : 65 mt  /  8.1m /  0-13m/min with full load / 0-23 empty hook
Load/radius/speed - maximum radius : 65 mt / 40m  /  0-13m/min with full load / 0-23 empty hook
Whip capacity/hoist speed - ld/rad./spd  : 15 mt  /  9.8 m / 44.9 m

Hook load indicator automatically corrected for boom angle : Yes
Alarm (audible,visual,both) : Both
Automatic brake : Yes
Safety latch on hooks : Yes
Crown saver (limit switch) : Yes
Boom illumination : Yes

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

--------------------------------------------------------------------------------------------------------
Search words - 

Offshore Crane for Sale
Liebherr BOS 2600-65D Litronic Crane for Sale
Liebherr Crane for Sale
BOS 2600-65D Litronic Crane 
Liebherr Offshore Crane for Sale
Offshore Crane in Working Condition

--------------------------------------------------------------------------------------------------------

 
60 Ton New Offshore Hydraulic Wireluffing Crane
Worldoils Marketplace
60 Ton New Offshore Hydraulic Wireluffing Crane

Worldrigs ID: WR1398

60 Ton New Offshore Hydraulic Wireluffing Crane
New Offshore Diesel Hydraulic Crane

Technical Specifications
Design Rules : API-2C Offshore
Classification Society : DNV

Hazardous Area Classification : Zone 2 IIA-T3

Design temp : +10°C
Operating temp : +14 to 36°C
Roll/pitch : 1.0/1.0 deg

FEM Classification
Appliance group : A4-Q2-U4
Machinery group : M4-L2-T4

Power supply 1 : 480V-60Hz-3Ph
Power consumption 1 : 14.5kW
Power supply 2 : 240V-60Hz-1Ph
Power consumption 2 : 1.2kW

Total weight : 150T

Main Hoist
SWL max : 60/40T
No. of falls : 3/2
Outreach max. : 45.7m
Outreach min. : 9.0m
Wave height max. : 2.5m
Load/outreach : See loadchart
Hook travel : 70m
Hoist speed (3 falls, 60T) : 0-22 m/min
Hoist speed (2 falls, 40T) : 0-33 m/min

Aux Hoist
SWL max. : 7.5T
Manriding : 1.0T
No. of falls : 1
Outreach max. : 46.7m
Outreach min. : 10.0m
Wave height max. : 2.5m
Load/outreach : See loadchart
Hook travel : 70m
Hoist speed : 0-60 m/min

Slewing
Slewing sector cont. : 360 deg.
Slewing speed : 0-1 rpm

Luffing Time
From max. to min. :
No load; 45.7m to 9m  50 sec

Note : Speeds, weight and power consumption are appr. within +/-5%

Crane Interface Loads ( Crane Foundation)
Including 1.5 Safety Factor Acc. to API 2C Rules
:-
Dynamic Titlting Moment : 46231 kNm
Dynamic Axial Load : 3180 kN
Radial Load : 150 kN
Slewing Torque : 1980 kNm

Crane Pedestal Loads Including 1.5 Safety
Factor Acc. to API 2C Rules : -

Dynamic Titlting Moment : 45832 kNm
Dynamic Axial Load : 3024 kN
Radial Load : 148 kN
Slewing Torque : 1980 kNm

Boomrest Interface Loads :-
FY : 575 kN
FX : 375 kN
FZ : 15 kN

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------------------------------------------
Search words (for official use only) :
60T Offshore Wireluffing Diesel Hydraulic Crane - New
New Offshore Hydraulic Wireluffing Crane for Sale
New Offshore Diesel Hydraulic Crane - 60 Ton - For Sale
Offshore Crane for Sale
60 Ton New Offshore Hydraulic Wireluffing Crane - For Sale

--------------------------------------------------------------------------------------------------------------------------

40T Offshore Wireluffing Diesel Hydraulic Crane - New
Worldoils Marketplace
40T Offshore Wireluffing Diesel Hydraulic Crane - New

Worldrigs ID: WR1397

40T Offshore Wireluffing Diesel Hydraulic Crane - New
New Offshore Diesel Hydraulic Crane For Sale


Technical Specifications
Design Rules : API-2C Offshore
Classification Society : DNV

Hazardous Area Classification
Boom tip incl. hooks : Zone 2 IIA-T3
Rest of crane : Safe zone

Design temp : +10°C
Operating temp : +14 to 36°C
Roll/pitch : 1.0/1.0 deg

FEM Classification
Appliance group : A4-Q2-U4
Machinery group : M4-L2-T4

Power supply 1 : 480V-60Hz-3Ph
Power consumption 1 : 14.5kW
Power supply 2 : 240V-60Hz-Ph
Power consumption 2 : 1.2kW

Total weight : 120T

Main Hoist
SWL max : 40/25T
No. of falls : 3/2
Outreach max. : 45.7m
Outreach min. : 9.0m
Wave height max. : 2.5m
Load/outreach : See loadchart
Hook travel : 70m
Hoist speed (3 falls, 40T) : 0-22 m/min
Hoist speed (2 falls, 25T) : 0-33 m/min

Aux Hoist
SWL max. : 7.5T
Manriding : 1.0T
No. of falls : 1
Outreach max. : 46.7m
Outreach min. : 10.0m
Wave height max. : 2.5m
Load/outreach : See loadchart
Hook travel : 70m
Hoist speed : 0-60 m/min

Slewing
Slewing sector cont. : 360 deg.
Slewing speed : 0-1 rpm

Luffing Time
From max. to min. :
No load; 45.7m to 9m  50 sec

Note : Speeds, weight and power consumption are appr. within +/-5%

Crane Interface Loads ( Crane Foundation)
Including 1.5 Safety Factor Acc. to API 2C Rules

Dynamic Titlting Moment : 32636  kNm
Dynamic Axial Load : 2427  kN
Radial Load : 106  kN
Slewing Torque : 1246  kNm

Crane Pedestal Loads
Including 1.5 Safety Factor Acc. to API 2C Rules

Dynamic Titlting Moment : 32360  kNm
Dynamic Axial Load : 2272  kN
Radial Load : 103  kN
Slewing Torque : 1246  kNm

Boomrest Interface Loads
FY : 575  kN
FX : 375  kN
FZ : 15  kN

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------------------------
Search words (for official use only) :
40T Offshore Wireluffing Diesel Hydraulic Crane - New
Over 45M New Offshore Hydraulic Crane for Sale
Offshore Hydraulic Wireluffing Crane for Sale
New Offshore Diesel Hydraulic Crane - 40 Ton - For Sale

-------------------------------------------------------------------------------------------------------------

 
Offshore Crane Barge for sale
Worldoils Marketplace
Offshore Crane Barge for sale

Worldrigs ID: WR1309

Offshore Crane Barge for sale
400MT Floating Crane Barge for Sale
46M Offshore Crane Barge

General
Class : Buerau Veritas. Pontoon-crane, unrestricted navigation

Principal Dimensions
L.O.A : 46,86 m
Beam : 20,00 m
Draught : 3,20 m
Gross tonnage : 904 mt
Nett tonnage : 271 mt

Deck Equipment
Lifting devices :
Main lifting blocks, 2 x 200 mt
Fly-jib lifting blocks, 2 125 mt
Main runner, 1 x 5 mt
Winches : 4 point mooring system
Several auxiliary winches
Salvage equipment :
Various salvage equipment, shackles & wires
2 x 3” salvage pumps
2 x 1,5” salvage pumps

Main Engine(s) & Propulsion
Main engines : Baudouin, 2 x 12P15-2S, 2 x 457 KW at 1800 rpm
Type Propulsion : 2 x Jastram RP07
Propeller(s) : 2 x Azimuth propeller
Gear box : 2 x Twindisc couplings
Bow thruster : 1 x Schottel SRP 75
Max speed self running : 6 knots

Accommodation : 10 persons

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words(for official use only) :
Offshore Crane Barge for sale
400MT Floating Crane Barge for Sale
47M Crane Barge for sale
Sheer Leg Crane Barge for sale
46M Offshore Crane Barge
Crane Barge for sale
400MT Sheer Leg Crane Barge for sale
Floating Crane Barge for Sale

-----------------------------------------------------------------------------------------------------------------

 
Gottwald HMK G 7608B  Harbour Crane for Sale
Worldoils Marketplace
Gottwald HMK G 7608B  Harbour Crane for Sale

Worldrigs ID: WR1304

Harbour Crane for Sale
Gottwald HMK G 7608B  Harbour Crane for Sale
2009 built Gottwald HMK G 7608B  Harbour Crane for Sale

Specifications
YOM : 2009
Running hours on diesel engine : 2980
Capacity on hook : 140 T/11-20 m – 42,5 T / 51 M
4 rope
Cable reel on boom
Rotator hook remote controlled
Excellent condition

The crane is ready for immediate delivery

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
--------------------------------------------------------------------------------------------------------
Search words (for official use only) -
Harbour Crane for Sale
Gottwald HMK G 7608B Harbour Crane for Sale
2009 built Gottwald HMK G 7608B Harbour Crane for Sale
Used Gottwald HMK G 7608B Harbour Crane for sale

-------------------------------------------------------------------------------------------------------

60TLattice Boom Offshore Crane
Worldoils Marketplace
60TLattice Boom Offshore Crane

Worldrigs ID: WR1382

Lattice Boom Offshore Crane
40/60T Lattice Boom Offshore Crane for Sale
60T Lattice Boom Offshore Crane for sale
Offshore Crane for Sale
40 Ton Lattice Boom Offshore Crane for sale


Technical Specification
Design rules : API-2C Offshore
Classification Society : DNV

Hazardous Area Classification : Zone 2 IIA-T3
Design temp. : +10°C
Operating temp. : +14 to 36°C
Roll/Pitch : 0,5 / 0,5 deg

Fem Classification
Appliance group : A4-Q2-U4
Machinery group : M4-L2-T4

Power supply 1 : 480V-60Hz-3Ph
Power consumption 1 : 14,5 kW
Power supply 2 : 240V-60Hz-1Ph
Power consumption 2 : 1,2kW

Total weight : 168T

Main Hoist
SWL max. : 60 / 40 T
No. of falls : 3 / 2
Outreach max. : 45,7m
Outreach min. : 9,0m
Wave height max. : 2,5m
Load / outreach : see load chart
Hook travel : 70m
Hoist speed (3 falls, 60T) : 0-22 m/min
Hoist speed (2 falls, 40T) : 0-33 m/min

Aux Hoist
SWL Max. : 7,5T
Manriding : 1,0T
No. of falls : 1
Outreach max. : 46,7m
Outreach min. : 10,0m
Wave height max. : 2,5m
Load/outreach : see loadchart
Hook travel : 70m
Hoist speed : 0-60 m/min

Slewing
Slewing sector cont. : 360deg
Slewing speed : 0-1rpm

Luffing time
From max to min :
No load; 45,7m to 9m : 50sec

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------
Search words (for official use only) :
Lattice Boom Offshore Crane
40T Lattice Boom Offshore Crane for sale
40/60T Lattice Boom Offshore Crane for sale
25T Lattice Boom Offshore Crane for sale
Offshore crane for sale
-------------------------------------------------------------------------------------

 
Liebherr LHM 500 S Harbour Crane for Sale
Worldoils Marketplace
Liebherr LHM 500 S Harbour Crane for Sale

Worldrigs ID: WR1306

Liebherr LHM 500 S Harbour Crane for Sale
2007 built Harbour Crane for sale

Description
Yom : 09/2007
Maintenance done by Liebherr
The crane has been working until the end of 2009
Low working hours 3.000

It is in mint condition and ready for any inspection if required.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
--------------------------------------------------------------------------------------------------------
Search words (for official use only) -
Liebherr LHM 500 S Harbour Crane for Sale
Used Harbour Crane for Sale
Liebherr LHM 500 S Harbour Crane - 2007 built
2007 built Harbour Crane for sale

-------------------------------------------------------------------------------------------------------

 
100ft Diesel Powered Marine API 2C Crane for Sale
Worldoils Marketplace
100ft Diesel Powered Marine API 2C Crane for Sale

Worldrigs ID: WR1305

Diesel Powered Marine API 2C Crane - 100ft for Sale
Diesel Powered Marine API 2C Crane for Sale
100ft Diesel Powered Marine API 2C Crane for Sale
60 Tons Diesel Powered Marine API 2C Crane
Pedestal Mounted Hydraulic Marine Crane

Description
Designed and manufactured in accordance with all structural requirements

of API Spec 2C, ABS Shipboard Crane, USCG, AISC, ASTM, AWS, NEC
and OSHA

Boom
• Fixed length, 100 FT long lattice boom
• Boom tip section shield
• (2) 1000 watt flood lights
• (1) Aircraft warning light

Sheaves
Where possible HMW Nylon is used to minimize the weight of the crane.

Pedestal
• Pedestal height : 30”
• Diameter : 81- 5/16” O.D. with 45 degree bevel.
• 1-1/4” wall thickness

Winches
• Load line : LWD 850, 38,000 pound line pull, reeved 6 part line 1-1/4” Dyform
34LR Maximum wire rope capacity of LWD 850 is 2000 ft
• Fast line : Lantec LHS100, 10,000 pound line pull rated for personnel handling
reeved with 400 ft. of ¾” , Dyform 18 wire rope.

Slew Bearing
Rotek triple roller bearing, bearing raceway rated at 9,900,000 ft lbs.

Capacities
Thrust : From 100,000 to 17,300,000 pounds
Moment : From 20,000 to 63,000,000 foot-pounds
Radial : From 10,000 to 5,000,000 pounds
Gearing : Internally geared, externally geared or gearless models are available.

Crane Control System
• Large Cabin mounted onboard with platform.
• Hydraulic joy stick type controls located in cab on each arm rest.

Platform Mounted Diesel / Hydraulic HPU
• 535 HP Cummins Diesel Engine Tier 3 Engine ( OR 2, 250 HP electric motors.)

Lifting capacity
• 61ton @ 15mtr
• 34ton @ 25mtr

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
--------------------------------------------------------------------------------------------------------
Search words (for official use only) -
Diesel Powered Marine API 2C Crane - 100ft for Sale
Diesel Powered Marine API 2C Crane for Sale
60 Tons
Diesel Powered Marine API 2C Crane
100ft Diesel Powered Marine API 2C Crane for Sale
60T Pedestal Mounted Hydraulic Marine Crane for Sale
100ft Long Lattice Boom Crane for Sale
Diesel Mounted Marine Crane for Sale
Pedestal Mounted Hydraulic Marine Crane

-------------------------------------------------------------------------------------------------------

Truck Mounted DEMAG Crane for Sale
Worldoils Marketplace
Truck Mounted DEMAG Crane for Sale

Worldrigs ID: WR1406

Truck Mounted DEMAG Crane for Sale
DEMAG TC 2500 Mobile Crane

Description
DEMAG TC 2500 600/400 Tons Mobile Crane
600 tons with super lift counter weight tray, boom length of 60 m
400 tons with boom length 84m

Hoisting Blocks
Cap. (t) / Weight (kg) / B(min) m
250 / 4125 / 3.20
180 / 4240 / 3.20
125 / 1380 / 3.20
80 / 900 / 2.50
30 / 650 / 2.50

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------
Search words (for official use only) :
Mobile Crane for Sale
DEMAG Crane for Sale
400 Tons DEMAG Crane for Sale
Truck Mounted DEMAG TC 2500 Crane
600/400 Tons Mobile Crane for Sale

-----------------------------------------------------------------------------

 
2000T Lattice Boom Offshore Crane for sale
Worldoils Marketplace
2000T Lattice Boom Offshore Crane for sale

Worldrigs ID: WR1278

Lattice Boom Offshore Crane - 2000T for sale
2000T Lattice Boom Offshore Crane for sale
Used Lattice Boom Offshore Crane for Sale


Description

This crane is an electric crane and is still mounted on the barge to ease transportation. 
The barge is running out of class and is due to be scrapped.

The crane is in good working condition and this can be demonstrated. Lightweight of the
unit is abt 21.000ts without ballast.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
--------------------------------------------------------------------------------------------------------
Search words (for official use only) -
Lattice Boom Offshore Crane - 2000T for sale
2000T Lattice Boom Offshore Crane for sale
Offshore Crane for Sale - 2000 ton Lattice Boom
Used Lattice Boom Offshore Crane for Sale

-------------------------------------------------------------------------------------------------------

 
25T Lattice Boom Offshore Crane for sale
Worldoils Marketplace
25T Lattice Boom Offshore Crane for sale

Worldrigs ID: WR1381

Lattice Boom Offshore Crane
40/25T Lattice Boom Offshore Crane for sale
40T Lattice Boom Offshore Crane for sale
25T Lattice Boom Offshore Crane for sale
Offshore crane for sale


Technical Specification
Design rules : API-2C Offshore
Classification Society : DNV

Hazardous Area Classification
Boom tip incl. hooks : Zone 2 IIA-T3
Rest of crane : Safe Zone

Design temp. : +10°C
Operating temp. : +14 to 36°C
Roll/Pitch : 0,5 / 0,5 deg

Fem Classification
Appliance group : A4-Q2-U4
Machinery group : M4-L2-T4

Power supply 1 : 480V-60Hz-3Ph
Power consumption 1 : 14,5 kW
Power supply 2 : 240V-60Hz-1Ph
Power consumption 2 : 1,2kW

Total weight : 138T

Main Hoist
SWL max. : 40 / 25 T
No. of falls : 3 / 2
Outreach max. : 45,7m
Outreach min. : 9,0m
Wave height max. : 2,5m
Load / outreach : see load chart
Hook travel : 70m
Hoist speed (3 falls, 40T) : 0-22 m/min
Hoist speed (2 falls, 25T) : 0-33 m/min

Aux Hoist
SWL Max. : 7,5T
Manriding : 1,0T
No. of falls : 1
Outreach max. : 46,7m
Outreach min. : 10,0m
Wave height max. : 2,5m
Load/outreach : see loadchart
Hook travel : 70m
Hoist speed : 0-60 m/min

Slewing
Slewing sector cont. : 360deg
Slewing speed : 0-1rpm

Luffing time
From max to min :
No load; 45,7m to 9m : 50sec

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------
Search words (for official use only) :
Lattice Boom Offshore Crane
40T Lattice Boom Offshore Crane for sale
25T Lattice Boom Offshore Crane for sale
Offshore crane for sale
40/25T Lattice Boom Offshore Crane for sale

-------------------------------------------------------------------------

Crawler Crane for Sale
Worldoils Marketplace
Crawler Crane for Sale

Worldrigs ID: WR271

Crawler Crane 600 T for Sale
Crawler Crane with 450 Ton Skyhorse Attachment
1982 Built Crawler Crane for Sale


Principal Particulars
Built year : 1982
Manufacturer : American Hoist & Derrick Company

Classification
ABS consulting, API (2C)

Capacities
Lifting capacity : 122 t @ 12.7 m radius (Boom angle: 80.1 deg.)
Engine : Cummins KTA 1150 c

Dimensions & Load Chart

Dimensions : 
Overall height : 11.563 mtrs
Overall length : 68.5 mtrs.
Boom length : 61 mtrs.
Boom type :
94 H Tubular Chord boom with super sky horse attachment & trailing counterweight

Load line chart (Please refer full load & curve chart) :
Radius (m) / Boom Angle (deg.) / S.W.Load (kgs.)
10.7 m / 82.1 / 135930 kgs
12.2 m / 80.6 / 116470 kgs
15.2 m / 77.7 / 90070 kgs
18.3 m / 74.8 / 71380 kgs
21.3 m / 71.8 / 57860 kgs

Hoists & Other Features
Boom hoist :
Minimum breaking force : 460 kn (46.9 t)
Reeved with : 25.4 mm, 292.60 mtrs.
Max. Boom angle : 82.1 deg.

Auxiliary hoist :
Measured breaking force : 598.72 kn
Wire rope : 1-1/8" (28.5 mm), 2125 fts
Aux. block capacity : 10.5 t
Single line speed :
Nominal rating - 155 fpm, high speed rating: 275 fpm

Other features

Flood lights : 2 sets x 400 watt
Simultaneous operation : Capable of two function with full load & speed.

Main Hoist

Measured breaking force : 741 kn (75.6 t)
Wire rope : 1-1/4" (31.8 mm), 3600 fts.

Single line speed -
Nominal rating : 155 fpm
high speed rating : 275 fpm
Traveling block capacity : 122 t
Load indicator : Electronic load indicator

Rotation :
Rotation direction : 360 deg. swing with load.
Swing speed : 2.15 rpm max.
Transmission type (Crawler crane) : Mechanical with torque convertor

Price & Terms : Please use the email form below to enquire.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.
 
The details mentioned above are believed to be accurate but are not guaranteed.

------------------------------------------------------------------------
Search words(for official use only) :
Crawler Crane with Skyhorse Attachment for Sale
600 Ton Crawler Crane for Sale
600 T Crawler Crane with 450 T Skyhorse Attachment
1982 Built Crawler Crane for Sale
Skyhorse attached Crawler Crane for Sale

--------------------------------------------------------------------------
 
150 Ton Lattice Boom Offshore Crane
Worldoils Marketplace
150 Ton Lattice Boom Offshore Crane

Worldrigs ID: WR1092

Lattice Boom Crane Offshore for Sale
Offshore Lattice Boom Crane - 150 ton


General Specification

Slewing Angle : 360º(Continus)
Slewing Speed(Full Load) : 0~0.6rpm
Luffing Time(Full Load) : 250s Up/down
Luffing Angle : +15° ~ +82°
Parking Angle : -0° ~ +15°
Operator Cabin : Left Side

Main Winch Data
Lifting Capacity(SWL) : 150T@12m,28.5T@46m
No. Of Fall : 4
Working Radius : 9.0m(Min) / 46m(Max)
Main Lifting Speed : (0-150T) : 0~10m/min
Main Lifting Speed : (0-90T) : 0~18m/min
Hook Travel : 51m

Aux Winch Data
Lifting Capacity(SWL)  : 16T@49m, Man Riding :1.5T
No. Of Fall : 1
Working Radius : 11m(Min) / 49m(Max)
Main Lifting Speed(Full Loading) : 0~48m/min
Lifting Height : 56m

Note
All operational speeds stated above are based on average volumetric
efficiencies provided by our suppliers of hydraulic components.
A speed variation tolerance of +10% to -5% is within the accepted range
and should be taken into consideration.

Hydraulic Arrangement
Hydraulic Systems
The hydraulic transmission will be designed for optimum performance
within the constraint of available horsepower. High pressure hydraulic
system uses power more efficiently and applies power as needed.

All motions controls offer infinitely variable speed and full reversing
characteristics. Two full flow filters will be installed. The filter(s) will
be adequately sized for full flow operation without causing pump
cavitation. Replaceable wire mesh filter cartridge of minimum
absolute value of 40 micron will be used. The pumps will have
overflow suction independent of the reservoir, and the arrangement
of piping can avoid air pockets.

Hoisting Circuit
Each winch is driven by a common open loop hydraulic system
including piston pump, piston motor and epicycles gearbox. Each
winch is fitted with oil immersed, multi-disc and dynamically rated
“fail safe” brake.

The fixed displacement hoist motors offer a constant operating speed.

Slewing Circuit

The slew circuit is driven by a common open loop hydraulic system.
Dynamic braking of slewing is by means of hydrostatic compensation.
Similarly positive locking brakes are fitted in the circuit and used as
static brake;

Luffing Circuit

Luff circuit is driven by a common open loop hydraulic system. Each
winch is fitted with oil immersed, multi-disc,dynamically rated “fail safe”
brake. an additional luff  ratchet cylinder is included, providing a positive
means of locking the luff drum whenever the prime mover is shutdown.

Hydraulic Piping

1. Pipes: No pipe threads will be used for the high-pressure lines larger
than 3/8". Hydraulic components that have pipe threaded ports lines will
have a minimum working pressure 300PS.

2. Pipe fittings: Zinc plated mild steel material. External fittings are
painted and protected by Denso tape or equivalent against corrosion.

3. Hoses: High rubber quality for best resistance against sunlight and
salinity, Wire breaded for applicable specified hydraulic pressure ratings

4. Hose couplings: Zinc plated mild steel material, External couplings
are painted and protected by Denso tape or equivalent against corrosion

Hydraulic Oil Tank

1. Level gauge with isolating valve (to top cover)
2. Inspection and cleaning cover
3. Filter with fine mesh stainless steel strainer and ventilation
4. A relief valve will be installed in the discharge line of pump.

Cooling Circuit
The air-oil heat exchanger will be provided and sized to ensure
continuous operation of the crane under the ambient temperatures
given on the data sheets.

Electric Arrangement

Standards, Codes and Protection
Refer to Codes Of Practice and Standards. The electrical systems
onboard the crane complies with these standards for good offshore
electrical design and engineering practices.

Standard Lighting
The following are provided as standard lighting packages for the crane.
More lights can be added according to client's request.

Description : Aviation Warning Light
Quantity : 1
Size : 85W
Location : Boom Tip
Power Supply : UPS

Description : Aviation Warning Light
Quantity : 1
Size : 85W
Location : Mast
Power Supply : UPS

Description : Florescent Access Light
(with 90 min back-up battery)
Quantity : 2
Size : 2 x 36 W
Location : Access Way Outside Cabin
Power Supply : Main

Description : Florescent Access Light
Quantity : 2
Size : 2 x 36 W
Location : Machinery House
Power Supply : Main

Description : Florescent Access Light

(with 90 min back-up battery)
Quantity : 1
Size : 2 x 18 W
Location : Cabin
Power Supply : Main

Description : High Pressure Sodium Floodlight
Quantity : *
Size : 400 W
Location : Boom
Power Supply : Main

Power Supply
Main Power Supply : 415 VAC ,  03 Phase ,  50 Hz
Uninterrupted Power Supply : 230 VAC ,  01 Phase ,  50 Hz

Others
Junction box(es) is provided at the pedestal interface for connection
to client supply.
By default only SS316 junction boxes are installed onboard.

Generally cable wires will be multi-stranded copper and protected
against mechanical damage. All power and control cables are with
XLPE/EVA/GSWB/EVA construction. Occasionally able of
XLPE/EVA/CWB/EVA is used when big power cable is part of
the design.  All electrical lines are tagged accordingly for ease of
maintenance.

All outdoor equipments and instruments are Ingress Protected IP56.
Indoor equipments and instruments are rated with IP44 as minimum.

Ordinarily, the power supply for crane is transmitted from pedestal to
slewing platform through the centre slip ring to ensure the crane can
work at any angle.

Controls and Instruments

Cabin
The following instruments are arranged on the console to permit the
operator to maintain an uninterrupted view of the loads and instrumentation.
The two(2) motion controls joysticks designed according to API-2C, are
ergonomically correct and easy to handle. All instruments are clearly labeled.
1. Motion Control Joysticks:
2. “Dead-Man” Type
- Position sensitive with motion and speed infinitely variable and proportional to
 movement  from spring-return central position.
-  Luff and slew (single left) joystick
-  Main and auxiliary hoist (single right) joystick
-  Prime Mover Start/Stop Switch
-  Prime Mover Emergency Shutdown Switch
-  Slew Brake Control Lever for option
-  Safe Load Indicator System
-  Visual and Audible Annunciator Panel
-  Boom Hoist Down Override Switch
-  Pressure Gauges: Boast Control / Hoist / Slew / Luff
-  Electrical Switches:
-  Lighting
-  Windshield Wipers & Washer
-  Warning Horn
-  Air Conditioning
-  Main and Auxiliary Hoist selector
-  Tachometer

Hoist Mechanisms
Hoist Winch Data
Feature : Hoist Drum
Description : Material
Details : Cast Steel
Remark : 100% NDT

Description : Groove
Remark : Reeving not over 3 layers

Description : Support End
Details : Anti-friction Bearing

Feature : Braking
Description : Type
Details : 1 x Band Brake
Remark : Asbestos free lining, for man riding winch only.

Details : 1 x Multi-disc Brake
Remark : Positive Locking

Details : 1x Load valve
Remark : As dynamic Brake

Description : Safety Factor
Details : Minimum 2.0

Feature : Rope Anchors
Description : Type
Details : Bolted rope clamp
Remark : For ease of rope replacement

Description : Safety Factor
Details : Minimum 1.1
Remark : Ensures rope breaking strength when over loaded

Feature : Ratios

Description : Drum to Rope
Details : Min.19 : 1
Remark : Drum pitch diameter over rope diameter

Feature : Safety
Description : Drum flange beyond top layer
Details : 2.5 x rope diameter
Remark : To avoid rope jumping out of drum unintentionally

Description : Fleet angle
Details : < 2.5⁰
Remark : Ensures smooth and even rope spooling at all times

Description : Dead turns on the drum
Details : Min.5
Remark : Amount of rope that is not in used even at the
maximum hoist reach of the crane

Auxiliary hoist are designed with same data, except that it
is also designed for personnel lifting.

Luffing System

Feature : Hoist Drum
Description : Material
Details : Cast Steel
Remark : 100% NDT

Description : Groove
Remark : Reeving not over 3 layers

Description : Support End
Details : Anti-friction Bearing

Feature : Braking

Description : Type
Details : 1x Load valve
Remark : As dynamic Brake

Details : 1 x Multi-disc Brake
Remark : Positive Locking

Details : ratchet and pawl
Remark : Luffing locking device

Description : Safety Factor
Details : Minimum 2.0

Feature : Rope Anchors
Description : Type
Details : Bolted rope clamp
Remark : For ease of rope replacement

Description : Safety Factor
Details : Minimum 1.1
Remark :  Ensures rope breaking strength when over loaded

Feature : Ratios
Description : Drum to Rope
Details : Min.19 : 1
Remark : Drum pitch diameter over rope diameter

Feature : Safety
Description : Drum flange beyond top layer
Details : 2.5 x rope diameter
Remark : To avoid rope jumping out of drum unintentionally

Description : Fleet angle
Details : < 2.5⁰
Remark : Ensures smooth and even rope spooling at all times

Description : Dead turns on the drum
Details : Min.5
Remark : Amount of rope that is not in used even at the
maximum hoist reach of the crane.

Boom Luffing-in limit buffer
Mast
The Luffing sheaves are placed on the mast (A-frame) which is fitted with
a top platform for maintenance and inspection of the mast head sheaves,
luff hoist rope and anchor connections. Access to the Top Platform is by
ladder from the machinery deck. The ast is pin connected to the machinery
deck.

Bridle

 N/A

Slew Mechanisms

Slew Bearing
Brand- ROTHE-ERDE XUZHOU or equivalent
Rolling Element- Triple Cylindrical Roller
Lubrication
- Grease holes in diagonal orientation in outer ring
- Lubrication lines are fitted on the machinery deck for refilling grease
into the bearing

Slew Drive

Type- Fixed displacement hydraulic motor
Gearbox- Epicyclical
Brake- Oil immersed multi-disc brake(s)
Operating Conditions- Slew design wind speed 24m/s
Pinions- Four(4)
Emergency slewing is possible with one (1) pinion

Boom

Length - 47M & 49M
Type - Reinforced Lattice Structure
Pins - High Tensile
Connectors - Cast Steel
Welding Test - NDT 100% MPI, 100% UT/RT
Boom Top Platform  - Both Sides

Safety  
Hardwood blocks-  To prevent rubbing of ropes on boom bracing
damaging paint and cause unnecessary rusting.
Walkway paths- 760mm wide grating along and inside of boom for
maintenance access Handrails- Along boom section

Boom Bottom 
Type- Reinforced Lattice Structure
Material- High tensile low alloy low carbon seamless chords with mild
steel bracings

Boom Intermediate Section 

Type - Reinforced Lattice Structure
Material - High Tensile Low Alloy Low Carbon Seamless Chords with
mild steel bracings

Boom Head 

Type - Reinforced Lattice Structure
Material
- High Tensile Low Alloy Low Carbon Seamless Chords
- With Mild Steel Bracings
- High Strength Steel Head Plate

Reeving System
Sheaves
Materials - Steel
Processing Technique - Cast
Ratio - 20 : 1 (Sheave diameter / Rope diameter)
Lubrication - Lubrication through sheave pin
Bearing - Heavy duty sealed cylindrical roller

Ropes Rope Size (mm)
Design Factor -
Main Hoist and Auxiliary Hoist : Minimum 5.0
Luff Hoist and Pendant : Minimum 4.0

Rotation Characteristic -
Main Hoist  and Auxiliary Hoist : Non-Rotating
Luff Hoist : Low Rotation
Pendant : Non-Rotating

Construction -
Main Hoist and Auxiliary Hoist : RH and WSC
Luff Hoist : RH and IWRC
Pendant : WSC

End Connections : Solid Thimble
Finishing : Compacted and Galvanized

Hooks
Basic design factor of the hook is more than 4.0. The hooks are made of
cast steel and tested to -40°C, or -6°C below lowest design temperature.
All hooks come with lockable safety latch and swivel bearings.  Hook
blocks will be of significant weight to prevent unraveling of rope while unloaded.

Machinery Deck
Machinery Turret
The Turret is made of high strength steel.  Depending on crane model
and configuration, most mechanical and control components such as the
Power Pack,  Cabin and Winches are placed on the Turret for best operational
efficiency. Kicker  plates are installed for safety as well as handrails around
the Turret.

Operator Cabin
Structure - 5 mm steel plate
Floor Area - 1685mm x 1300mm
Position  - Port of crane
Acoustic Shield  - Noise level during operation ≤ 75 dBA
Weather  Shield  - Complete sealed through for water runoff

Visionary  
Forward Windows- Clear Safety Glass
Side Windows- Clear Safety Glass; open-able
Rear View Mirror- N/A

Safety Equipment  
Safety Bar - Front & side windows to prevent accidental fall
Horn - Electric warning horn
Fire Extinguisher - 1.5kg Dry Powder
Annunciator - See Safety Features

Accessibility  
Headroom - 2.1 meters
Door - Side slip door with lock
Maintenance - Removable panels for access to cables & hoses
-  Rooftop access for air conditioner maintenance
-  Side access to front of cabin for window clearing and wiper replacement

Other Accessories   
Chair - Fully adjustable cushioned type
Hour Meter - Digital / Analog
Communication - Equipment (PA Speakers Telephone set, VHF/UHF radios
and loud speaker with microphone system) free issue by shipyard.
Control Console - See Controls and Instruments
Power  - Power socket
Lighting - See electrical system
Windshield Wiper - Electrical type
Air Conditioning  - Roof top unit
Engraved Stainless Steel Plate
- Design certified load chart
Rope specification chart
- API monogram

Prime Movers
Prime Mover Data – Diesel Engine
Brand : Caterpillar
Model : C18 Acert
Rating : 2x372KW(2 sets of diesel engine) @ 1800RPM

Starting System -
Primary Battery : Attempts x seconds
Secondary : Attempts x seconds

Drive Output -
Primary Battery : Splitter Gearbox

Consumables -
Primary Battery : Fuel Grade
Secondary : ASTM D975 No.2-D Diesel fuel or equivalent

Primary Battery : Coolant
Secondary : ASTM D4985 or equivalent

Primary Battery : Lubrication
Secondary : API CG-4 oils or equivalent

Prime Mover Sizing
The prime mover is appropriately sized for the following conditions :
1 operation @ full load with full speed

Safety Features

Cabin
An annunciator is mounted in the cabin to alert the operator of possible
risky crane  operation to avoid unfavorable incidents. This will be a solid state
unit first out” alarm  sequence giving both audible and visual warning and
fitting with test and acknowledgement buttons.

The audible and visual alarming signals are provided as following:-
- High Return Pressure(filter jammed)
- Hoist Up Limit
- Hoist Down Limit
- Luff Up Limit
- Luff Down Limit with override for stowing
- Engine Overspeed
- Engine Water High Temperature
- Engine Lube Oil Low Pressure
- Engine Fuel Low Pressure
- Hydraulic Temperature High
- Hydraulic low level
  
Powerpack
The following are provided at the power pack for status monitoring:
- Engine Lube Oil Pressure Gauge - Engine Lube Oil Temperature

Gauge
- Engine Fuel Pressure Gauge - Engine Water Temperature Gauge
- Engine Tachometer - Engine Emergency Stop Button
- Fuel Tank Level Switch - Hydraulic Oil Level Gauge
- Hydraulic Pump Cavitations - Hydraulic Pump Filter Indicator

Crane Operation Limit
Limit  switches  are  provided  to  define  safe  working  limits  of  all 
crane  operations including hoisting and luffing.

Operation : Main/Aux. Hoist   
Detection Level : Upper Working Limit
Action : Stop Up Motion
Deactivation : Hoist Down

Detection Level : Lower Working Limit
Action : Stop Down Motion
Deactivation : Hoist Up

Operation : Boom Hoist   
Detection Level : Lower Working Limit
Action : Stop Boom Down Motion
Deactivation : Boom Up or Override for Stowing

Detection Level : Upper Working Limit
Action : Stop Boom Up Motion and A&V warning
Deactivation : Boom Down

Detection Level : Ultimate Up Limit
Action : Stop Boom Up Motion and A&V warning continued
Deactivation : Boom Down

Luff-in decelerator and stop in limit is controlled by the incoming boom
and provides  gradual deceleration until minimum radius.  Operation
shutdown occurs and luff  brakes automatically engage overriding the manual
control in the operator cabin.

Safe Load Indicator

The Safe Load Indicator will provide the following to the operator :
- Crane rated capacity (T)
- Actual  load on hooks (T)
- Boom radius (meters)
- Boom angle (Deg rees)
- Visual alarm at 90% SWL
- Intermittent horn at 100% SWL
- Loud continuous horn at 105% SWL
- Overload cut off switch
- Mechanical  boom  angle  installed  at  the  boom  where  visible  from
operator cabin

Standard Practices

In line with West Marine mission to deliver good service and quality to
the customers, here are some of the standard practices adopted into existing
company operation for better product quality.

- All ladders are welded with square rungs in diamond orientation with
ladder cages.
- All handrails are made of galvanized pipe 48.3mm OD,  except those
on boom sections for weight saving purposes
- Cable trays are SS316 perforated.  Cables and hoses are secured with
SS cable ties.
- All machined pins, end covers, and small adaptors are zinc plated to
approximately 15 micron thickness.
- All fasteners M12 and below used are SS304.  All fasteners above M12
are Grade 8.8 or equivalent, fluorocarbon coated.
- Slew bearing fasteners are ISO Grade 10.9, fluorocarbon coated
- Clear labels on all critical equipment onboard
- SS304 and/or white traffolyte with black inscriptions are chosen as
standard for labeling

Special Tools

An Emergency Slewing Handle is an emergency crank used to slew the
crane to a safe direction in the event there is a loss of power to the crane.
An Emergency Lowering Hand Pump is provided to lower the load to
safe level in the event there is loss of power to the crane.
A monorail with girder and chain block Maintenance Jib is with provided
to carry out any maintenance work that is required onboard the crane.

Surface Treatment

External treatment
Pedestal, crane house and boom
- Surface preparation to ISO 8501-1, SA 2.5
- First coat zinc rich epoxy primer to 50 µm dry film thickness
- Second coat two pack epoxy to 100 µm dry film thickness
- Third coat polyurethane finish to 65 µm dry film thickness
- Total; three coats to 200 µm dry film thickness

Internal treatment
Pedestal and crane house
- Surface preparation to ISO 8501-1, SA 2.5
- First coat zinc rich epoxy primer to 40 µm dry film thickness
- Second coat two pack epoxy to 75 µm dry film thickness
Oil tank (integrated in crane house)
- 16.2.2.1 Surface preparation to ISO 8501-1, SA 2.5
- 16.2.2.2 First coat zinc rich epoxy primer to 40 µm dry film thickness

Boom
No treatment as fully closed steel box structure.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels
where needed.

The details mentioned above are believed to be accurate but are not
guaranteed.

 --------------------------------------------------------------
Search words (for official use only) -
Lattice Boom Offshore Crane for sale
New Offshore Crane for Sale
150 ton New Offshore Crane
New Offshore Lattice Boom Crane for Sale
Offshore Crane - 150 Ton - For Sale
150 ton Offshore Lattice Boom Crane
New 150 ton Offshore Crane for Sale

 --------------------------------------------------------------
 
  
1 2
  


Cranes for sale
 
37 Ton Hagglunds Crane G1626 for sale
Worldoils Marketplace
37 Ton Hagglunds Crane G1626 for sale

Worldrigs ID: WR2287

Hagglunds Crane G1626 for sale
Used Hagglunds Crane G1626 for sale


Technical Specifications
Type of crane : G1626
Weight : 37 tons
Type of current : 3-60HZ
Supply voltage : 440V
Control voltage : 220V

Mechanical Data
Jib radius : Max 26m
Jib radius : Min 3.5m
Hoisting capacity, single crane : Max 16 ton
Hoisting capacity, single crane at Jib radius 26m : Max 16 ton

Hoisting speed at 0-16 ton : 42m/min
Hoisting speed at 0-6.5 ton : 84m/min

Jib radius : 30 S
Slewing speed, single crane : Max 1.5 rev, min
Wire rope, hoising winch : Dia 38mm x 126m
Wire rope, luffing winch : Dia 32mm x 73.6m

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us anemail to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


-------------------------------------------------------------------------------------
Search Words (for official use only) :
Hagglunds Crane G1626 for sale
37 Ton Hagglunds Crane G1626 for sale
Used Hagglunds Crane G1626 for sale
Hagglunds Crane G1626 - 37 ton - For Sale

------------------------------------------------------------------------------------
Available for selling

Hagglunds Crane G1626 for sale
Contact Us
ID 2287
Deck Crane for Sale
Worldoils Marketplace
Deck Crane for Sale

Worldrigs ID: WR2421

Deck Crane for Sale

Description :

Technical Data
General :
Type of crane : L403 2/3033.5-2

Weight : 66 ton
Type of current : 3 - 60Hz
Supply voltage : 440V
Control voltage : 100V

Mechanical Data :
Jib radius ( At SWL  = 40 tons) : max. 32.0m
Jib radius ( At SWL  = 30 tons) : max. 33.5m
Jib radius : min. 2.4m
Lifting height H : 7.845m
Lifting height K : 27.155m

Hoisting capacity at jib radius 32m : max. 40 ton
Hoisting capacity at jib radius 33.5m : max. 30 ton
Hoisting speed at 0 -40/30 ton : 0 - 20 m/min.
Hoisting speed at 0 - 16 ton : 0 - 40 m/min.
Luffing time from max. to min. jib radius : 65 sec.
Slewing speed : max. 0.6 rev/min.

Wire rope, hoisting winch : ø 34 mm x 291.0m
                                              No. 388 8065-805
Wire rope, hoisting winch : ø 28 mm x 116.5m
                                               No. 388 3261-810
Wire rope, stabilizing winch : ø mm m
                                                  No.
Sling, stabilizng winch : No.

Cable for cable winchs : No.

Cable load-relieving : No.

Socket plug : No.

Clamp : No.

Electrical Data :
Main motor
Type of current : 3-60 Hz
Rated power, cont. : 185 kw
Rated power, 40% int. : 295 rev./min.
Speed : 1785 rev./min.
Rated voltage : 440 v
Starting current : 640 A

Gear box data :
Gear box type : 388 3140-801
Gear ratio : i = 0.683
Speed : rev/min

Hydraulic data :
Hoisting winch circuit : 187 5241-801
Pump type : 2 x 119 cm3
Hydraulic motor type : 078 0040-803
Flow rate, per rev. theoretical : 33780 cm3/rev.

Luffing winch circuit :
Pump type : 187 5241-802
Displacement : 2 x 119 cm3
Hydrualic motor type : 178 1322-801
Flow rate, per rev. theoretical : 16300 cm3/rev.

Slewing circuit :
Pump type : 187 5241-802
Displacement : 119 cm3
Hydraulic motor type : 388 3127-801
Flow rate, per rev. theoretical : 59.8 cm3/rev.

Feed and control circuit :
Pump type : 388 1669-801
Displacement : 49.1cm3
Feed pump motor
Type of curent : 3-60 Hz
Rated power 2 poles : 20 kw
Rated power 4 poles : 13 kw
Speed 2 poles : 3360 r/min
Speed 4 poles : 1680 r/min
Starting current 2 poles : 141A
Starting current 4 poles : 107A

Oil tank
Oil volume; Oil filling : 650 litres


Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------
Search words (for official use only) :
Deck Crane for Sale
Used Deck Crane for Sale
66 Ton Deck Crane 
-------------------------------------------------------------------------------------------

Available for selling

Deck Crane for Sale
Contact Us
ID 2421
Used OS200 Pedestral Crane for sale
Worldoils Marketplace
Used OS200 Pedestral Crane for sale

Worldrigs ID: WR2288

OS200 Pedestral Crane for sale
55M Boom Length - Pedestral Crane for sale


Technical Data
Single fall (10 TE at 58.7m) : Platform duty
Two fall (30 TE at 40m) : Platform duty
Three fall (45 TE at 25m) : Platform duty
Four fall (60 TE at 20m) : Platform duty

Boom length : 55M (Boom nose pulley to boom foot pin)
Tail radius : 6.0M

Height of lift (Min radius above BFP) :
34.35M - Whip
50.35M - Main

Depth of lower (Below BFP) :
86.65 - Whip
75.65 - Main

Ropes

Main Hoist : 36mm x 587m long
Tail rope : 10mm c 60m long

Whip hoist : 40mm x 218m long
Tail rope : 10mm x 60m long

Boom hoist : 38mm x 524m long

Note : Main and whip hoist ropes are not to be used during  works test.

Pulleys
Main : 864mm groove dia
Whip : 964mm groove dia
Boom : 1026 and 1261mm groove dia

Slew ring : Rothe erde, Clyde fasterners

Lifting Gear
Ansell Jones
10te ball swivel
30/45 te, 2/3 fall block
60te, 4 fall block

Splitter gearbox : Flender
Engine/SP gearbox coupling : Vulkan, Cardan shaft type
Air receiver : Charnock, 30 cu.ft.

Motors CW brakes
Main hoist : Staffa C200-180-80 X 2
Whip hoist : Staffa C200-160-100 X 2
Boom hoist : Staffa C200-180-90 X 2
Slew : Rexroth A2F63 X 2

Pumps
Main hoist & whip hoist : Abex PII 2 X 2
Boom hoist : Abex PII X 2
Slew : Abex P6 X 1
Retarder : Rexroth A2F63/80
Lube : Splitter gearbox - integral with gearbox

Prime Mover

Diesel engine - Finning, Cannock
Caterpillar 3412 DI TA
Continuous output at flywheel
480kw at 1900rpm
1 hour in 12hr rating 560kw

Driver's cabin : S&P design

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us anemail to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


------------------------------------------------------------------------------------------------------
Search Words (for official use only) :
OS200 Pedestral Crane for sale
OS200 Pedestral Crane - 55M Boom Length - For sale
Used Pedestral Crane for sale
Pedestral Crane - OS200 - For Sale

------------------------------------------------------------------------------------------------------
Available for selling

OS200 Pedestral Crane for sale
Contact Us
ID 2288
Gottwald HMK 280E Lattice Boom Crane for Sale
Worldoils Marketplace
Gottwald HMK 280E Lattice Boom Crane for Sale

Worldrigs ID: WR895

Gottwald HMK 280E Lattice Boom Crane
Lattice Boom Crane - 1993 built - For Sale
1993 built Lattice Boom Crane for Sale

Description
Rubber tyred STS with lattice boom
Year of Manufacture : 1993

Capacity
40 ton/33 mtr.
19 ton/ 47 mtr.

Generator : Siemens 600 kVa
Operating hours : 8000

Condition : Was normal working on jobsite up to january 2013.
One of the two lifting cable is broken (25-30000 Eur cost) Should be repaired by client.
Crane selled as it is, where is

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
--------------------------------------------------------------------------------------------------------
Search words (for official use only) -
Gottwald HMK 280E Lattice Boom Crane
Used
Gottwald HMK 280E Lattice Boom Crane for Sale
1993 built Lattice Boom Crane -
Gottwald HMK 280E
Used Lattice Boom Crane for sale in Europe
1993 Built - Lattice Boom Crane - For Sale
Lattice Boom Crane for Sale - 1993 built
Gottwald HMK 280E Lattice Boom Crane for Sale in Europe
1993 built Gottwald HMK 280E Lattice Boom Crane

-------------------------------------------------------------------------------------------------------

Available for selling

Gottwald HMK 280E Lattice Boom Crane for Sale
Contact Us
ID 895
30 ton Electro Hydraulic Knuckle Boom Offshore Crane for Sale
Worldoils Marketplace
30 ton Electro Hydraulic Knuckle Boom Offshore Crane for Sale

Worldrigs ID: WR1081

Electro-Hydraulic Knuckle Boom Offshore Crane
30T Knuckle Boom Offshore Crane
30T Crane for offshore vessels for sale

General :
Classification Society : ABS
Design Life : Crane design is based on a lifetime of 20 years
Lift definition(s) :
1. Lifts between vessel and quay side in sheltered waters, i.e. harbor lift,
2. Lifts on vessel’s deck, i.e. internal lift
3. Lifts in open sea over side of vessel to Vessel, i.e. external lift

Technical Data
Slewing Angle : 360º
Slewing Speed : 0~1rpm
Luffing time : 90s Up/down

Main Winch Data :
Lifting Capacity(SWL) : 30T@12M,10T@22M;
Dynamic Factor : 1.40
Working Radius : 6.7m(Min) / 33m(Max)
Main Lifting Speed : 0~15m/min
Lifting Height : 60m
List/trim Condition : According to API 2C rules
Steel Wire Dia : 42mm
Outer Layer,full Load : 30T
Wire Rope : Anti-Twist Type,Galvanized

Aux Winch Data :
Lifting Capacity(SWL) : 5T@33M
Dynamic Factor : 1.40
Working Radius : 6.9m(Min) / 33m(Max)
Main Lifting Speed  : 0~20m/min
Lifting Height : 40m
List/trim Condition : According to API 2C rules
Steel Wire Dia : 17mm
Outer Layer,full Load : 5T
Wire Rope : Anti-Twist Type,Galvanized

Pedestal Diameter(outer) : 2800mm
Pedestal Wall thickness : 25mm

Loading forces to deck structure   :
1. Dynamic overturning moment : 7100KN.m
2. Dynamic vertical force : 1510KN
3. Dynamic horizontal force  : 96KN

Electric Motor
Power Supply : 440V/60Hz/3Ph
Protection Grade : IP55
Insulation Grade : F
Space Heater : 230V/60Hz/1Ph
Power consumption : 250KW

Control System
Operator’s cabin :
1. Right hand side location seen from crane house towards boom tip
2. Access from ladder mounted on the pedestal
3. Mounted on vibration dampeners
4. Made from mild steel material
5. Shot blasted to SA 2.5
6. Colour of top coat as per crane
7. Air condition unit
8. Internal lighting, 2 x 18 W roof mounted above seat
9. Windows
10. Front window
11. 2 Side windows
12. All windows of tempered safety glass

Cabin controls :
1. Main control valve
2. Spring centred control handles
3. Right handle:
Hoisting up / down motion – Y-axis
Luffing up / down motion knuckle jib – X-axis
4. Left handle :
Luffing up / down motion main boom – Y-axis
Slewing right / left motion – X-axis
All motions are of infinite variable (stepless) control from zero to full speed.
5. Control panel with crane safety information :
Mode selection
Load indication with allowable load / radius information
6. Cabin console
 Wiper and washer switches
Heater control and thermostat
7. Warning horn
8. Instruction and name plates in English
9. Dynamic load radius chart

Safety System
Control system
1. Load monitoring system
2. Hook load, i.e. actual load versus permitted load
3. Load cell
4. Load limiting system

All main hydraulic circuits
are protected from over-pressure by relief valves set to
values corresponding to crane’s capacities
1. Overload alarms
2. Emergency stop

Drive system
1. Electric motor
2. Thermistor protection
3. Hydraulic power unit
4. High hydraulic oil temperature alarm / stop
5. Low hydraulic oil level alarm / stop 

Slewing machinery
1. Load holding valve which will hold motion in case of hydraulic pressure drop
2. Fail safe multi-disc brake 

Slew bearing
1. Reputable and recognized Maker
2. Bolts and nuts of high tensile steel
Slew gear
1. Gear with brake, motor and load control valve as one complete unit
2. Internal pinion drive

Luffing machinery
1. Load holding valve which will hold motion in case of hydraulic pressure drop
2. Luffing cylinder(s) designed to reduce speed before reaching end positions

Hoisting machinery
Main winch
1. Manual Overload Protection System (MOPS)
2. Load holding valve which will hold motion in case of hydraulic pressure drop
3. Fail safe multi-disc brake. Brake is spring operated and pressure released
4. 5 turns of wire rope remain on winch drum when all wire rope is paid out
5. Hook stop in upper and lower most positions
Auxiliary winch
1. Overload Protection 
2.Load holding valve which will hold motion in case of hydraulic pressure drop
3. Fail safe multi-disc brake. Brake is spring operated and pressure released

Wire sheaves
1. Fixed wire sheave bracket
2. Double roller bearings
3. Grease nipples

Hydraulic Arrangement
Hydraulic system
1. Open loop system
2. Hydraulic motor(s)

Hydraulic oil tank
1. Integrated in crane
2. Hatch for inspection and cleaning
3. Drain valve
4. Full flow return filter(s), pressure and drain filters for sensitive circuits, eg
pilot and feed circuits
5. Sight glass with temperature indicator
6. Level sensor (switch) for low level alarm and low, low level stop
7. Temperature sensor for cooler control and automatic stop in case of overheating

Hydraulic oil cooler

1. Air cooler; electrically fan driven

Hydraulic lines
1. Pipes:Mild steel material,Painted
2. Pipe fittings: Zinc plated mild steel material.External fittings are painted and
protected by Denso tape or Tectyl against corrosion.
3. Hoses:High rubber quality for best resistance against sunlight and salinity,
Wire breaded for applicable specified hydraulic pressure ratings
4. Hose couplings: Zinc plated mild steel material, External couplings are painted and
protected by Denso tape or Tectyl against corrosion

System cleanliness
1. All components are thoroughly cleaned prior to installation.
2. Cleanliness to NAS level 8

Electric Arrangement
1. Power supply :
Slipring assembly for transfer of electric power to crane’s rotating sections

Electric motor(s) (for applicable zone)
1. Motor rating S6-40 % ID
2. Protection class IP55.
3. Insulation class F.
4. Temperature rise class F.
5. Stillstand heating against condensation
6. Squirrel cage
7. Self-cooling (fan)

Electric motor starter
1. Protection class IP54.
2. Safety door (main isolation) switch
i. Start push button – green colour.
ii. Stop push button – red colour.
iii. Emergency push / pull button – red colour.
iv. Lamps
1. Power on – white colour
2. Running – green colour
3. Stillstand heating – blue colour
v. Stillstand heating control
vi. Thermistor overload protection relay.
vii. Ampere meter
viii. Hour counter

Lighting
1. Light inside operator’s cabin
2. Light inside pedestal
3. Light inside machine room

Communication System
Operator’s cabin installed equipment (preliminary):
1. Alarm horn
2. VHF / UHF
3. Telephone
4. PA-speaker

Surface Treatment
1. External treatment
1. Pedestal, crane house and boom
i. Surface preparation to ISO 8501-1, SA 2.5
ii. First coat zinc rich epoxy primer to 50 µm dry film thickness
iii. Second coat two pack epoxy to 100 µm dry film thickness
iv. Third coat polyurethane finish to 65 µm dry film thickness
v. Total; three coats to 200 µm dry film thickness

Internal treatment

1. Pedestal and crane house
i. Surface preparation to ISO 8501-1, SA 2.5
ii. First coat zinc rich epoxy primer to 40 µm dry film thickness
iii. Second coat two pack epoxy to 75 µm dry film thickness
2.  Oil tank (integrated in crane house)
i. 16.2.2.1 Surface preparation to ISO 8501-1, SA 2.5
ii. 16.2.2.2 First coat zinc rich epoxy primer to 40 µm dry film thickness
3.  Boom

No treatment as fully closed steel box structure.

Lubrication
1. Lubrication
1. Wire sheaves installed on boom.
2. All grease nipples to GB standard.
2. Crane:Fully lubricated for first set of operating hours

Documentation
User Manual :
English language , Adobe PDF file, 3 computer discs.
Paper format is available upon request.

Content :
i. Introduction (general information)
ii. Main data
iii. Technical description
iv. Preparation and installation instructions
v. Operating instructions
vi. Maintenance instructions
vii. Data sheets and spare parts
viii. Parts list and drawings
ix. Certificates are supplied as a separate file

Scope Of Delivery
Crane Body :
1. Pedestal as separate unit:
Internal stiffeners for transportation for pedestal of diameter > 2250 mm and
height > 2150 mm
2. Crane house as separate unit
3. Main boom as separate unit
4. Knuckle boom as separate unit
5. Main winch as separate unit
6. Wire rope as a separate unit
7. Loose gear and various ladders, platforms etc
8. Cylinders as separate units

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------------------------------------------
Search words :
Electro Hydraulic Knuckle Boom Offshore Crane for sale
30T Knuckle Boom Offshore Crane
Offshore 30Ton Offshore Knuckle Boom
30Ton Electro-Hydraulic Knuckle Boom Offshore Crane

Offshore Crane for sale - 30Tons
Offshore 30T Crane for offshore vessels for sale
30T Offshore Knuckle Boom Crane for sale

---------------------------------------------------------------------------------------------------

Available for selling

Electro-Hydraulic Knuckle Boom Offshore Crane - 30T for Sale
Contact Us
ID 1081
Harbour Crane for Sale
Worldoils Marketplace
Harbour Crane for Sale

Worldrigs ID: WR1303

Harbour Crane for Sale
Liebherr LHM 500 S Harbour Crane for Sale
Used Liebherr LHM 500 S Harbour Crane for sale


Specifications
16.000 hours

Four rope
YOM 2007
Available : July 2014

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

--------------------------------------------------------------------------------------------------------
Search words (for official use only) -
Harbour Crane for Sale
Liebherr LHM 500 S Harbour Crane for Sale
Used Liebherr LHM 500 S Harbour Crane for sale
2007 built Liebherr LHM 500 S Harbour Crane for Sale

-------------------------------------------------------------------------------------------------------

Available for selling

Harbour Crane Liebherr LHM 500 S for Sale
Contact Us
ID 1303
Hydra Marine 3568 AHC Crane
Worldoils Marketplace
Hydra Marine 3568 AHC Crane

Worldrigs ID: WR1925

Hydra Marine 3568 AHC Knuckle Boom Crane for Sale
Knuckle Boom Crane for Sale


Description :

2007 Hydra Marine Model 3568 AHC (Active Heave Compensated) Knuckle Boom Crane
It has a 150-ton load capacity.
The unit was placed in service in 2008, and has roughly 300 hours operating time

Price & terms : Please enquire using the email form below.
If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------------------
Search words(for official use only -
 
Hydra Marine Knuckle Boom Crane for Sale
150 Ton Capacity Crane for Sale
2007 Built Knuckle Boom Crane for Sale
Hydra Marine Model 3568 AHC Knuckle Boom Crane for Sale
Knuckle Boom Crane for Sale
-------------------------------------------------------------------------------------------------------



Available for selling

Hydra Marine 3568 AHC Knuckle Boom Crane for Sale
Contact Us
ID 1925
1998 Gottwald HMK 280E Mobile Harbour Crane for sale
Worldoils Marketplace
1998 Gottwald HMK 280E Mobile Harbour Crane for sale

Worldrigs ID: WR2199

Gottwald HMK 280E Mobile Harbour Crane for sale
1998 Built Gottwald HMK 280E Mobile Harbour Crane


Description
Used GOTTWALD Mobil Harbour Crane HMK 280 E with used
spreader make BROMMA type EH-170 Version 2-rope-version

Manufacturer GOTTWALD Type HMK 280 E
Year of construction 1998

Working hours engine : approx. ( new in 2012 ) 3.800 h
Working hours luffing : approx. 8.000 h
Working hours hoisting : approx. 10.000 h
Working hours slewing : approx. 30.000 h

Price & terms : Please enquire using the email form below.
If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


-------------------------------------------------------------------------------------------------------
Search words(for official use only) -
Gottwald HMK 280E Mobile Harbour Crane for sale
1998 Built Gottwald HMK 280E Mobile Harbour Crane
Used Mobile Harbour Crane for sale
G​ottwald Cranes for Sale - 1998 Built - For Sale
Mobile Harbour Crane for sale

------------------------------------------------------------------------------------------------------
Need for buying

Gottwald HMK 280E Mobile Harbour Crane for sale
Contact Us
ID 2199
400 tons Crane Barge for sale
Worldoils Marketplace
400 tons Crane Barge for sale

Worldrigs ID: WR1308

Offshore Crane Barge for sale
400 tons Crane Barge for sale
Revolving type DNV class 400 tons Crane Barge for sale


General
Class : Det Norske Veritas + 1A1 FAM, chain laying, crane and
salvage pontoon. Adment to register : Cra V for crane

Principal Dimensions
Length o.a. : 60 m
Lenght waterline : 50 m
Beam o.a. : 26 m
Max draught : 6 m
Draught hull : 4 m
Lifting capacity : 400 mt

Crane
Make : Liebherr 1500 LG, 400 mt revolving
Boom length : 45 or 80 m, telescopically extended
Main drums : 2 x 20 mt SLP, 1260 m / 38 mm dia. Wire
Main hooks : 200 mt or 400 mt with corresponding
max. speed 16,8 m per minute or 8,4 m per minute.
Aux. Hoist : 20 mt SLP with hook 40/20 mt,
hoist speed 0-100 m per minute
Power : Electro-hydraulic, 300 Kw-44 / 60 hz

Deckloading
Deck space : 676 m2 (26 m x 26 m)
Overall max uniform deck load : 7,5 t/m2

Heavy Lift Equipment
Puller : Clyde CLI 1100
Wire dia. : 115 mm
Max. Load in single line : 500 mt
Corresponding speed : 4.6 m per minutes
Max. Load in double line : 1000 mt
Corresponding speed : 2,3 m per minutes
Chain laying frame and stoppers for SWL 500 mt

Propulsion
2 retractable azimuth thrusters, situated starboard
side fwd. And port side aft.
Azimuth :
Aquamaster with Deutz diesels, type SBA6M816, 520 hp / 1800 rpm.

Generating plant
2 generator sets, each :
Alternator : Stamford MC634a, 290 Kw, 440-220V / 60 Hz.
Engine : Deutz diesel, SBA6M816, 421 hp / 1800 rpm.
Auxiliary : 50 Kw

Mooring and Deck Winches
Foredeck : 2 x 16 mt twin drum winches with warping head
After-deck : 2 x 12 mt twin drum winches with warping head
On rotating crane house : 2 x 5 mt winches with warping head

Deck equipment and features
- 220 mt shark jaw for chain hook-off and recovery
- 500 mt nose wheel
- Work truck, and various load handling equipment
- Misc. Shackles, chain, slings and wires for load handling

Navigation and communication
The bridge is fitted with complete navigation, internal and
external communication and control systems.
The position instrumentation includes DGPS and conmap systems.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words(for official use only) :
Offshore Crane Barge for sale
400 Tons Floating Crane Barge for sale
Crane Barge for sale
Revolving type DNV class 400 tons Crane Barge for sale
400 tons Crane Barge for sale
60M Crane Barge for sale

-----------------------------------------------------------------------------------------------------------------

Available for selling

400 tons Floating Crane Barge for sale
Contact Us
ID 1308
Kobelco CKS800 Crawler Crane for sale
Worldoils Marketplace
Kobelco CKS800 Crawler Crane for sale

Worldrigs ID: WR1510

Kobelco CKS800 Crawler Crane for sale
80T Hydraulic Crawler Crane for sale


Main Specifications


Crane Boom
Max. Lifting Capacity : 80 t x 3.0 m
Max. Length : 54.9 m

Fixed Jib
Max. Lifting Capacity : 7.0 t x 20.0 m
Max. Combination : 42.7 m + 18.3, 45.7 m +12.2 m

Main & Aux. Winch
Max. Line Speed (1st layer) : 120 m/min
Rated Line Pull (Single line) : 78 kN {8 tf}
Wire Rope Diameter : 22 mm
Wire Rope Length : 220 m (Main), 130 m (Aux.)
Brake Type (free fall) : Wet-type multiple disc brake (Optional)

Working Speed
Swing Speed : 4.0 min-1{rpm}
Travel Speed : 1.7/1.1 km/h

Power Plant
Model : HINO J08E-VM
Engine Output : 213 kW/2,100 min-1
Fuel Tank : 400 liters

Hydraulic System

Main Pumps : 3 variable displacement
Max. Pressure : 31.9 MPa {325 kgf/cm2}
Hydraulic Tank Capacity : 440 liters
Self-Removal Device : Counterweight/self-removal device (Option)

Weight
Operating Weight : 75.1 t *1
Ground Pressure : 84.7 kPa
Counterweight : 27,200 kg
Transport Weight : 39,850 kg *2

Line speeds in table are for light loads. Line speed varies with load.
*1 Including upper and lower machine, 27.2 ton counterweight, 6.5 ton carbody
weight, basic boom, hook, and other accessories.
*2 Base machine with boom base, gantry, crawlers, and wire ropes (front/boom
hoist)

We also have used cranes.

Additional information regarding this equipment will be shown on request


Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------------------------
Search words(for official use only - 

Kobelco CKS800 Crawler Crane for sale
80T Hydraulic Crawler Crane for sale
Kobelco CKS800 80tons crawler crane
Kobelco CKS800 Hydraulic Crawler Crane for sale
Hydraulic Crawler Crane - Kobelco CKS800 - For Sale
80 Tons Kobelco CKS800 Hydraulic Crawler Crane for sale

----------------------------------------------------------------------------
Available for selling

Kobelco CKS800 Crawler Crane for sale
Contact Us
ID 1510
Crane for Sale
Worldoils Marketplace
Crane for Sale

Worldrigs ID: WR534

Crane for Sale
J Frame ROV Handling Crane


Description
J frame ROV handling crane
Hydraulic power pack attached of dual electric 3phase 480 volt 50 HP with reservoir

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------------------------------------
Search words(for official use only) -  
Crane for Sale
Crane for sale with Hydraulic power pack attached 
J frame ROV Handling Crane for sale
ROV Handling Crane for sale

---------------------------------------------------------------------------------------------
Available for selling

ROV Handling Crane for Sale
Contact Us
ID 534
49M Floating Crane for sale
Worldoils Marketplace
49M Floating Crane for sale

Worldrigs ID: WR2203

250T Floating crane for sale
1976 Built Self Propelled Floating Crane for Sale


Specifications

Class: BC * A2 - Self Propelled Floating Crane
Built: 1976
LOA: 49.70m
Breadth: 21.70m
Depth: 4.10m
Draft (Minimum): 2.28m
Draft (Maximum): 2.50m
Lifting Height (Principal): 37.00m
Lifting Height (Auxiliary): 39.00m
Free Deck Area: 208m2
 
Propulsion System
2 Schottel SRP 300, 405 KW each, 1 at bow and 1 at stern
 
Power Generation System
3 generator groups MTU + WEG 415 kva each
1 group auxiliary generator Cummins + WEG 82 kva
1 Muted Genset Caterpillar 750 kva
 
Service Tanks
Fresh Water: 28 litres
Diesel Oil: 56 litres
 
Accommodations
1 dressing room, 1 dining room, 2 cabins x 4 people,
3 cabins x 2 person, 1 cabin x 6 people, 1 kitchen and 1 office

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


--------------------------------------------------------------------------------------------------
Search words(for official use only) -
49M Floating Crane for sale
250T Floating crane for sale
1976 Built Self Propelled Floating Crane for Sale
Used Floating Crane for Sale
Self Propelled Floating Crane - 49M - For Sale

----------------------------------------------------------------------------------------------------
Available for selling

250T Floating Crane for sale
Contact Us
ID 2203
Newbuilding 100 tons non-AHC Knuckleboom Crane
Worldoils Marketplace
Newbuilding 100 tons non-AHC Knuckleboom Crane

Worldrigs ID: WR347

Newbuilding 100 tons non-AHC Knuckleboom Crane
100 tons non-AHC Knuckleboom Crane for sale

Specifications
- 100 tons 10 meters
- Built 2013 
- Class ABS
- Weight 125 tons
- 2 x 355 Kw electric motors power supply
- Max outreach 27 meters

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

------------------------------------------------------------------------------------------
Search words (for official use only) :
New non-AHC Knuckleboom Crane for sale
Non-AHC Knuckleboom Crane 2013 Built for sale
100 tons non-AHC Knuckleboom Crane for sale  in Far East Asia
Non-AHC Knuckleboom Crane for sale - Newbuilding
New 100T non-AHC Knuckleboom Crane for sale  in Far East Asia

------------------------------------------------------------------------------------------

Available for selling

Non-AHC Knuckleboom Crane - Newbuilding 100 tons for sale
Contact Us
ID 347
2001 Gottwald HMK 300E Mobile Harbour Crane for sale
Worldoils Marketplace
2001 Gottwald HMK 300E Mobile Harbour Crane for sale

Worldrigs ID: WR2200

Gottwald HMK 300E Mobile Harbour Crane for sale
Used Mobile Harbour Crane for sale
2001 Built Gottwald HMK 300E - For Sale


Description
Used GOTTWALD Mobil harbour crane HMK 300 E with used
spreader make BROMMA type EH-170 Version 2-rope-version

Manufacturer GOTTWALD Type HMK 300 E
Year of construction 2001

Working hours engine : approx. (new in 2009) 6.300 h
Working hours luffing : approx. 7.000 h
Working hours hoisting : approx. 12.000 h
Working hours slewing : approx. 22.000 h

Price & terms : Please enquire using the email form below.
If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


-------------------------------------------------------------------------------
Search words(for official use only -
Gottwald HMK 300E Mobile Harbour Crane for sale
Mobile Harbour Crane for sale
2001 Built Gottwald HMK 300E Mobile Harbour Crane
G​ottwald Cranes for Sale - 2001 Built - For Sale
Used Mobile Harbour Crane for sale

-------------------------------------------------------------------------------
Need for buying

Gottwald HMK 300E Mobile Harbour Crane for sale
Contact Us
ID 2200
Kobelco 7250-2F Crawler Crane for sale
Worldoils Marketplace
Kobelco 7250-2F Crawler Crane for sale

Worldrigs ID: WR1504

Kobelco 7250-2F Crawler Crane for sale
250tons Crawler Crane for Sale


Specifications

Crane Boom
Max. Lifting Capacity : 250 t/4.6 m
Max. Length : 76.2 m

Long Boom
Max. Lifting Capacity : 37.5 t/14.4 m
Max. Length : 91.4 m

Fixed Jib
Max. Lifting Capacity : 22.7 t/15.0 m
Max. Combination : 76.2 m + 30.5 m

Tower Jib
Max. Lifting Capacity : 25.0 t/18.0 m
Max. Combination : 64.1 m + 51.8 m
Tower Angle : 60° ~ 90°

Main & Aux. Winch
Max. Line Speed : 110 m/min (1st layer)
Rated Line Pull (Single Line) : 132 kN {13.5 tf}
Wire Rope Diameter : 28 mm
Wire Rope Length : 390 m (Main) 220 m (Aux.)
Brake Type : Spring-set hydraulically released (Negative)
Free-Fall Brake Type : Wet-type multiple disc brake (Optional)

Working Speed

Swing Speed : 2.2 min-1 {rpm}
Travel Speed : 1.1/0.7 km/h

Power Plant
Model : Hino P11C-UN
Engine Output : 247 kW/2,000 min-1 {rpm}
Fuel Tank Capacity : 400 liters

Hydraulic System
Main Pumps : 4 variable displacement
Max. Pressure : 31.9 MPa {325 kgf/cm2}
Hydraulic Tank Capacity : 600 liters

Weight
Operating Weight* : Approx. 211 t
Ground Pressure* : 122 kPa {1.25 kgf/cm2}
Counterweight : 97.1 t (Upper), 20.0 t (Lower)
Transport Weight** : 44.5 t

* Including upper and lower machine, 97.1 ton counterweight and 20.0 ton
carbody weight, basic boom, hook, and other accessories.

**Base machine with boom base, carbody, gantry, trans-lifter, lower spreader, upper spreader,
main and aux. winches including wire rope, and boom hoist winch including wire rope.

We also have used cranes.

Additional information regarding this equipment will be shown on request


Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------------------
Search words(for official use only - 

Kobelco 7250-2F Crawler Crane for sale
250tons Crawler Crane for Sale
Hydraulic Crawler Crane for Sale
Kobelco 7250-2F Hydraulic Crawler Crane for sale
250T Hydraulic Crawler Crane for Sale
Crawler Crane - Kobelco 7250-2F - For Sale

-----------------------------------------------------------------------------
Available for selling

Kobelco 7250-2F Crawler Crane for sale
Contact Us
ID 1504
AHC Offshore Knuckle-Boom Crane
Worldoils Marketplace
AHC Offshore Knuckle-Boom Crane

Worldrigs ID: WR1930

24 Tons AHC Offshore Knuckle-Boom Crane for Sale
New Offshore Knuckle-Boom Crane


Description :

Built 2010, never used
12 tons / 7 meters single fall: 24 tons / 7 meters double fall
Max radius 19 meters
2300 meters depth
BV and DNV certified
AHC and constant tension
Man riding and ship‐to‐ship transfers

Price & terms : Please enquire using the email form below.
If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------------------
Search words(for official use only - 
24 Tons AHC Offshore Knuckle-Boom Crane in Europe
2010 Built Offshore Knuckle-Boom Crane 
Unused Offshore Crane for Sale
24T Knuckle-Boom Crane For Sale in Europe
New 24 tons AHC Offshore Knuckle-Boom Crane
-------------------------------------------------------------------------------------------------------



 

Available for selling

AHC Offshore Knuckle-Boom Crane - 2010 Built for Sale
Contact Us
ID 1930
Mobile Harbour Crane for Sale
Worldoils Marketplace
Mobile Harbour Crane for Sale

Worldrigs ID: WR1114

Liebherr Mobile Harbour Crane for Sale
2009 Built LHM 400 Mobile Harbour Crane 


Description
:

1 Liebherr Mobile harbour crane Type LHM 400 Litronic

Manufacturer : Liebherr
Type : LHM 400
Year of construction : 2009
 

Crane is appropriate for general cargo handling, spreader- and motorgrap-operation
Version 2-rope-version

Capacity max. approx. : 
104,0 t to 22 m
52,8 t to 38 m
37,9 t to 48 m

Capacity motor-grap-operation :
43,3 t to 34 m
27,0 t to 48 m

Outreach approx. : 10 - 48,0 m
Lifting height max. approx. : 45,0 m

Lifting gear approx. : 0,0-90,0 m/min
Rotating gear approx. : 0,0-1,6 U/min
Luffing gear approx. : 55 sec
Crane travelling gear approx. : 0,0-90,0 m/min
Total weight approx. : 390 t
Price within BROMMA-spreader & SMAG-grab ( 17m³)

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

--------------------------------------------------------------------------------------------------------
Search words -

Mobile Harbour Crane for Sale
Liebherr LHM 400 Mobile Harbour Crane for Sale
Liebherr Crane for Sale
2009 Built Mobile Harbour Crane
LHM 400 Mobile Harbour Crane for Sale
--------------------------------------------------------------------------------------------------------

Available for selling

Liebherr Mobile Harbour Crane - LHM 400 Litronic - for Sale
Contact Us
ID 1114
2001 G​ottwald HMK 300E crane for Sale
Worldoils Marketplace
2001 G​ottwald HMK 300E crane for Sale

Worldrigs ID: WR1926

G​ottwald HMK 300E Crane for Sale
1998 Built
G​ottwald HMK 280E Crane for Sale
2 G​ottwald Cranes for Sale


Description :

2001 G​ottwald HMK 300E crane 
1998  G​ottwald HMK 280 crane

The engine in the 300E was replaced in 2009 and the 
engine on the HMK 280 was replaced in 2012. In both units, 
Cumins replaced the original 16V GE engine with 
COMPLETELY NEW, more powerful Cumins engine. 
Neither are a rebuild.​

Both of our HMK 280 and 300 Gottwald Crane models 
are two-wire machines and include 20’-40’ spreaders. 
To work with containers, the spreader can be utilized and 
the hook can be used to work with general cargo. 
The machines do not include hydraulic clamshells.

Hours on HMK 300: 6159
Hours on HMK 280: 3800

Price & terms : Please enquire using the email form below.
If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------------------
Search words(for official use only - 
G​ottwald HMK 300E & HMK 280 Cranes for Sale
2001 Built
G​ottwald HMK 300E Crane
1998 Built
G​ottwald HMK 280 Crane
G​ottwald Cranes for Sale
G​ottwald HMK 300E Crane for Sale
HMK 280 Crane for Sale
-------------------------------------------------------------------------------------------------------


Available for selling

G​ottwald HMK 300E and HMK 280 Cranes for Sale
Contact Us
ID 1926
Available for selling

60T Offshore Knuckle Boom Crane with AHC - Newbuilding
Contact Us
ID 1753
5 Ton Knuckle Boom Crane for Sale
Worldoils Marketplace
5 Ton Knuckle Boom Crane for Sale

Worldrigs ID: WR1492

5 Ton Knuckle Boom Offshore Crane for Sale
New Offshore Crane for Sale


Significant wave height (m) / SWL (kg)

0.5 / 3700
1.0 / 3000
2.0 / 1800
3.0 / 1000
4.0 / 700

Conditions / SWL (kg)
Harbour / 2000
Offshore, Hsig = 0.5 / 1600
Offshore, Hsig = 1.5 / 1300
Offshore, Hsig = 2.5 / 900

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.
The details mentioned above are believed to be accurate but are not guaranteed.


-----------------------------------------------------------------------------------------
Search words(for official use only)-
5 Ton Knuckle Boom Offshore Crane for Sale
New Offshore Crane for Sale
5 Ton Offshore Knuckle Boom Crane for Sale
Offshore Knuckle Boom Crane for Sale
New Knuckle Boom Offshore Crane

-----------------------------------------------------------------------------------------
Available for selling

5 Ton Offshore Knuckle Boom Crane for Sale
Contact Us
ID 1492
Available for selling

Kobelco 7250S Crawler Crane for sale
Contact Us
ID 1505
Kobelco 7120S Crawler Crane for sale
Worldoils Marketplace
Kobelco 7120S Crawler Crane for sale

Worldrigs ID: WR1503

Kobelco 7120S Crawler Crane for sale
120T Kobelco 7120S Crawler Crane for Sale


Main Specifications

Crane Boom
Max. Lifting Capacity : 120 t x 5.0 m
Max. Length : 61.0 m

Fixed Jib

Max. Lifting Capacity : 12.0 t x 28.0 m
Max. Combination : 61.0 m + 30.5 m

Long Boom
Max. Lifting Capacity : 24.0 t x 16.0 m
Max. Length : 79.2 m

Tower Jib
Max. Jib Length : 44.2 m
Max. Combination : 51.7 m + 44.2 m

Main & Aux. Winch

Max. Line Speed (1st layer) : 120 m/min
Rated Line Pull (Single line) : 118 kN {12.0 tf}
Wire Rope Diameter : 26 mm
Wire Rope Length : 275m (Main), 255 m (Aux.)
Brake Type (Free fall) : Wet-type multiple disc brake (Optional)

Working Speed
Swing Speed : 2.1 min-1{rpm}
Travel Speed : 1.3/0.9 km/h

Power Plant

Model : HINO P11C-VH
Engine Output : 271 kW/1,850 min-1
Fuel Tank : 400 liters

Hydraulic System
Main Pumps : 4 variable displacement
Max. Pressure : 31.9 MPa {325 kgf/cm2}
Hydraulic Tank Capacity : 535 liters
Self-Removal Device : NA

Weight

Operating Weight : 120 t *1
Ground Pressure : 93.6 kPa
Counterweight : 53,110 kg
Transport Weight : 34,800 kg *2

*1 Including upper and lower machine, 53.1 ton counterweight, basic boom, hook,
and other accessories.
*2 Base Machine with boom base gantry, wire ropes (front/rear/boom hoist)

We also have used cranes.

Additional information regarding this equipment will be shown on request


Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------------------
Search words(for official use only - 

Kobelco 7120S Crawler Crane for sale
120T Kobelco 7120S Crawler Crane for Sale
Hydraulic Crawler Crane - Kobelco 7120S - for sale
120 Tons Hydraulic Crawler Crane for sale

-----------------------------------------------------------------------------
Available for selling

Kobelco 7120S Crawler Crane for sale
Contact Us
ID 1503
Tadano GR600EX Rough Terrain Crane for sale
Worldoils Marketplace
Tadano GR600EX Rough Terrain Crane for sale

Worldrigs ID: WR1514

Tadano GR600EX Rough Terrain Crane for sale
60,000kg Rough Terrain Crane For Sale


General Data
Crane Capacity : 60,000 kg at 3.0 m
Boom : 5-section, 11.0 m - 43.0 m

Dimension

Overall length : approx. 13,380 mm
Overall width : approx. 3,315 mm
Overall height : approx. 3,790 mm

Mass
Gross vehicle mass : approx. 43,735 kg
- front axle : approx. 21,555 kg
- rear axle : approx. 22,180 kg

Performance
Max. travelling speed : computed 36 km/h
Gradeability(tan ) :
computed 147 % (at stall)
*30%

*Machine should be operated within the limit of engine crankcase
design (17˚ : MITSUBISHI 6M60-TL)

Additional information regarding this equipment will be shown on request

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------------------------
Search words(for official use only - 

Tadano GR600EX Rough Terrain Crane for sale
Rough Terrain Crane - Tadano GR600EX - for sale
60,000kg Rough Terrain Crane For Sale
Tadano GR600EX Hydraulic Rough Terrain Crane for sale
60,000kg Hydraulic Rough Terrain Crane for Sale

----------------------------------------------------------------------------
Available for selling

Tadano GR600EX Rough Terrain Crane
Contact Us
ID 1514
 Kobelco CKE1350-1F Crawler Crane for Sale
Worldoils Marketplace
 Kobelco CKE1350-1F Crawler Crane for Sale

Worldrigs ID: WR1507

Kobelco CKE1350-1F Crawler Crane for Sale
135 Tons Kobelco CKE1350-1F Crawler Crane for Sale


Main Specifications

Crane Boom
Max. Lifting Capacity 135 t/4.5 m
Max. Length 76.2 m

Luffing Boom
Max. Lifting Capacity 80 t/8.0 m
Max. Length 47.9 m

Long Boom
Max. Lifting Capacity 44.3 t/10.6 m
Max. Length 82.3 m

Fixed Jib
Max. Lifting Capacity 26.8 t/16.0 m
Max. Length 30.5 m
Max. Combination 61.0 m + 30.5 m

Luffing Jib
Max. Lifting Capacity 36 t/12.0 m
Max. Combination 47.9 m + 32.0 m, 44.8 m + 53.3 m

Main & Aux. Winch
Max. Line Speed 120 m/min (1st layer)
Rated Line Pull (Single Line) 132 kN {13.5 tf}
Wire Rope Diameter 26 mm
Wire Rope Length 275 m (Main) 255 m (Aux.)
Brake Type Spring-set hydraulically released (Nagative)
Free-Fall Brake Type Wet-type multiple disc brake (Optional)

Working Speed
Swing Speed 2.1 min-1 {rpm}
Travel Speed 1.3/0.9 km/h

Power Plant
Model Hino P11C-UN
Engine Output 247 kW/2,000 min-1 {rpm}
Fuel Tank Capacity 400 liters

Hydraulic System
Main Pumps 4 variable displacement
Max. Pressure 31.9 MPa {325 kgf/cm2}
Hydraulic Tank Capacity 535 liters
Self-Removal Device Standard counterweight removal

Weight
Operating Weight* Approx. 136 t
Ground Pressure* 106 kPa {1.08 kgf/cm2}
Counterweight 53.0 t (Upper), 10.0 t (Lower)
Transport Weight** Approx. 39.7 t

* Including upper and lower machine, 53.0 ton counterweight and 10.0 ton
carbody weight, basic boom, hook, and other accessories.
** Base machine with trans-lifter, 70 t hook, main and aux. winches (non-free fall)
including wire rope, self removal device.

We also have used cranes.

Additional information regarding this equipment will be shown on request


Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------------------------
Search words(for official use only - 

Kobelco 7250S Crawler Crane for sale
250T Kobelco 7250S Crawler Crane for sale
Hydraulic Crawler Crane for sale
Kobelco 7250S Hydraulic Crawler Crane for sale
Crawler Crane - 250 Tons - for sale
250Tons Kobelco 7250S Crawler Crane for sale

----------------------------------------------------------------------------
Available for selling

Kobelco CKE1350-1F Crawler Crane for Sale
Contact Us
ID 1507
Kobelco CKE1800-1F Crawler Crane for sale
Worldoils Marketplace
Kobelco CKE1800-1F Crawler Crane for sale

Worldrigs ID: WR1508

Kobelco CKE1800-1F Crawler Crane for sale
180tons Kobelco CKE1800-1F Crawler Crane for sale


Main Specifications


Heavy Duty Crane Boom
Max. Lifting Capacity : 180 t/3.75 m
Max. Length : 42.7 m

Crane Boom
Max. Lifting Capacity : 160 t/4.4 m
Max. Length : 85.3 m

Luffing Boom
Max. Lifting Capacity : 110 t/5.2 m
Max. Length : 54.9 m

Long Boom
Max. Lifting Capacity : 40.1 t/12.0 m
Max. Length : 85.3 m

Fixed Jib
Max. Lifting Capacity : 26.8 t/15.2 m
Max. Length : 30.5 m
Max. Combination : 73.2 m + 30.5 m

Luffing Jib

Max. Lifting Capacity :48.6 t/9.14 m
Jib Length : 21.3 m ~ 51.8 m
Max. Combination : 54.9 m + 51.8 m
Luffing Angle : 60° ~ 88°

Working Speed
Swing Speed : 2.6 min-1 {rpm}
Travel Speed : 1.1/0.7 km/h

Power Plant
Model : Hino P11C-UN
Engine Output : 247 kW/2,000 min-1 {rpm}
Fuel Tank Capacity : 400 liters

Main & Aux. Winch

Max. Line Speed : 100 m/min (1st layer)
Rated Line Pull : 132 kN {13.5 tf}
Wire Rope Diameter : 25.4 mm
Wire Rope Length : 430 m (Main) 335 m (Aux.)
Brake Type : Spring set hydraulically released (Negative)
Free Fall Brake : Wet-type multiple disc brake (Optional)

Hydraulic System

Pumps : 4 variable displacement
Max. Pressure : 31.9 MPa {325 kgf/cm2}
Hydraulic Tank Capacity : 550 liters
Self Erection Device : Standard

Weight
Operating Weight* : Approx. 164 t
Ground Pressure* : 103 kPa {1.06 kgf/cm2}
Counterweight : 60.0 t (Upper), 20.0 t (Lower)
Transportation Weight** : Approx. 44.0 t

* Including upper and lower machine, 60.0 ton counterweight, 20.0 ton carbody
weight, basic boom, hook, and other accessories.
** Base machine with boom base, trans-lifter, main and aux. winches (non-freefall)
including wire rope, self removal device.

We also have used cranes.

Additional information regarding this equipment will be shown on request


Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------------------------
Search words(for official use only - 

Kobelco CKE1800-1F Crawler Crane for sale
180tons Kobelco CKE1800-1F Crawler Crane for sale
Hydraulic Crawler Crane for Sale
180T Kobelco CKE1800-1F Crawler Crane for sale
Kobelco CKE1800-1F 180 Tons Crawler Crane for sale
Hydraulic Crawler Crane - Kobelco CKE1800-1F - for sale

----------------------------------------------------------------------------
Available for selling

Kobelco CKE1800-1F Crawler Crane for sale
Contact Us
ID 1508
Available for selling

Kobelco CKE800 Crawler Crane for sale
Contact Us
ID 1506
Manitowoc 12000 Crawler Crane for sale
Worldoils Marketplace
Manitowoc 12000 Crawler Crane for sale

Worldrigs ID: WR1512

Manitowoc 12000 Crawler Crane for sale
120T Manitowoc 12000 Crawler Crane for sale


Features
• 110 t (120 USt) Lift Capacity
• 397 mton-m (2,880 ft-kips) Maximum Load Moment
• 70,1 m (230 ft) Heavy-Lift Boom
• 82,3 m (270 ft) Fixed Jib on Heavy-Lift Boom
• 94,5 m (310 ft) Luffing Jib on Heavy-Lift Boom
• 247 kW (332 HP) engine
• 163 mpm (535 fpm) line speed
• 21 180 kg (46,700 lb) Maximum Line Pull
• 11 400 kg (25,100 lb) Rated Line Pull
• 10 000 kg (25,000 lb) Material Rehandling Clamshell capacity
• Fast, efficient self-assembly and disassembly
• Manitowoc Crane CARE comprehensive support

Engine
Hino P11C-UN, 6 cylinder, water-cooled diesel, direct fuel injection with
turbocharger, 247 kW (332 HP) at 2000 high-idle RPM. Maximum torque
1300 N•m (959 lb•ft) net at 1,500 rpm (SAE J 1349).

One diesel fuel tank, 400 liters (105 gallons) capacity.

Two 12 volt 136 AH capacity batteries, 24 volt system and 50 amp alternator.
All wiring harnesses and connectors are numbered for easier servicing. Machine
is equipped with individual fused branch circuits.

Controls
Full-flow hydraulic control system for constant variable pressure to front and rear
drums, boom hoist brakes and clutches. Controls respond instantly to the touch,
delivering smooth function operation.

Relief valve pressures :
Load hoist, boom hoist and propel system . . .  315kg/cm2 (4,480 psi)
Swing system . . . 280 kg/cm2, (3,980psi)
Control system . . .  80 kg/cm2 (1,140 psi)

Additional information regarding this equipment will be shown on request

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------------------------
Search words(for official use only - 

Manitowoc 12000 Crawler Crane for sale
120T Manitowoc 12000 Crawler Crane for sale
Crawler Crane for sale
120 Tons Crawler Crane for Sale

----------------------------------------------------------------------------
Available for selling

Manitowoc 12000 120tons Crawler Crane for Sale
Contact Us
ID 1512
Manitowoc 8500-1 Crawler Crane for Sale
Worldoils Marketplace
Manitowoc 8500-1 Crawler Crane for Sale

Worldrigs ID: WR1513

Manitowoc 8500-1 Crawler Crane for Sale
80tons Crawler Crane for Sale


Features
80t Capacity
61m (200ft) heavy-lift boom
Max. boom + jib combination : 54.9m (180ft) + 18.3m (60ft)
213kW (285hp) egine
160m/min (525 fpm) maximum line speed
75.6 kN (17,000 lb) rated line pull

Additional information regarding this equipment will be shown on request

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------------------------
Search words(for official use only - 

Manitowoc 8500-1 Crawler Crane for Sale
80tons Crawler Crane for Sale
Manitowoc 8500-1 80 Tons Crawler Crane for Sale
Crawler Crane Manitowoc 8500-1 for Sale
80T Manitowoc 8500-1 Crawler Crane

----------------------------------------------------------------------------
Available for selling

Manitowoc 8500-1 Crawler Crane for Sale
Contact Us
ID 1513
Tadano GR800EX Rough Terrain Crane for sale
Worldoils Marketplace
Tadano GR800EX Rough Terrain Crane for sale

Worldrigs ID: WR1515

Tadano GR800EX Rough Terrain Crane for sale
Rough Terrain Crane - Tadano GR800EX - for sale


General Data
Crane Capacity : 80,000 kg at 3.0 m
Boom : 5-section, 12.0 m - 47.0 m

Dimension
Overall length : approx. 14,375 mm
Overall width : approx. 3,315 mm
Overall height : approx. 3,795 mm

Mass
Gross vehicle mass : approx. 51,410 kg
- front axle : approx. 24,325 kg
- rear axle : approx. 27,085 kg

Performance
Max. travelling speed : computed 36 km/h
Gradeability(tan ) :
computed 94 % (at stall)
*30 %

*Machine should be operated within the limit of engine crankcase
design (17˚ : MITSUBISHI 6M60-TL)

Additional information regarding this equipment will be shown on request

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------------------------
Search words(for official use only - 

Tadano GR800EX Rough Terrain Crane for sale
Rough Terrain Crane - Tadano GR800EX - for sale
80,000kg Rough Terrain Crane For Sale
Tadano GR800EX Hydraulic Rough Terrain Crane for sale
80,000kg Hydraulic Rough Terrain Crane for Sale

----------------------------------------------------------------------------
Available for selling

Tadano GR800EX Rough Terrain Crane for sale
Contact Us
ID 1515
 Kobelco CKS1100 Crawler Crane for sale
Worldoils Marketplace
 Kobelco CKS1100 Crawler Crane for sale

Worldrigs ID: WR1511

Kobelco CKS1100 Crawler Crane for sale
110tons Kobelco CKS1100 Crawler Crane for sale


Main Specifications

Crane Boom
Max. Lifting Capacity 110 t x 3.6 m *3
Max. Length 70.1 m

Fixed Jib
Max. Lifting Capacity 10.9 t x 22.0 m
Max. Combination 61.0 m + 21.3 m

Main & Aux. Winch
Max. Line Speed (1st layer) 120 m/min
Rated Line Pull (Single line) 108 kN {11.0 tf}
Wire Rope Diameter 26 mm
Wire Rope Length 265m (Main), 235 m (Aux.)
Brake Type (free fall) Wet-type multiple disc brake (Optional)

Working Speed

Swing Speed 3.2 min-1{rpm}
Travel Speed 1.4/1.0 km/h

Power Plant
Model HINO J08E-VM
Engine Output 213 kW/2,100min-1
Fuel Tank 400 liters

Hydraulic System

Main Pumps 4 variable displacement
Max. Pressure 31.9 MPa {325 kgf/cm2}
Hydraulic Tank Capacity 535 liters
Self-Removal Device : Counterweight/crawler self-removal device

Weight

Operating Weight 102 t *1
Ground Pressure 95.4 kPa
Counterweight 34,600 kg
Transport Weight 57,410 kg *2

*1 Including upper and lower machine, 34.6 ton counterweight, 6.5 ton
carbody weight, basic boom, hook, and other accessories.
*2 Base machine with boom base, gantry, crawlers, and wire ropes
(front/boom hoist)
*3 Auxiliary sheave is must.

We also have used cranes.

Additional information regarding this equipment will be shown on request


Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------------------------
Search words(for official use only - 

Kobelco CKS1100 Crawler Crane for sale
110tons Kobelco CKS1100 Crawler Crane for sale
110T Kobelco CKS1100 Crawler Crane for sale
Hydraulic Crawler Crane - 110 Tons - for Sale
Kobelco CKS1100 Hydraulic Crawler Crane for sale
110T Crawler Crane for Sale

----------------------------------------------------------------------------
Available for selling

Kobelco CKS1100 Crawler Crane for sale
Contact Us
ID 1511
Deck Crane for Sale
Worldoils Marketplace
Deck Crane for Sale

Worldrigs ID: WR2024

Offshore Crane for Sale or Rental
2008 Built Deck Crane for Sale


Description :

This crane was manufactured in 2008 by U.S. manufacturer 
GoodCrane, Houston Texas for installation on offshore support 
vessel. Due to cancelled project, the crane was stored unused.
The crane have been upgraded after storage, and is offered as 
described below for sale or rental:

Main technical data :
Equipment / zone area : Electro hydraulic offshore crane / to be 
used in safe zone
Model : 65.62KSC11020 Knuckle boom

SWL all radius : 5 Ton Dynamic
Crane design standard : ABS guide for lifting appliances 2007 and API spec. 2C 6TH Ed
Pedestal  :
Included (1220 mm OD x 1,05 meter height
Optional pedestal installation with additional 2,25 meter height

Outreach max. / min. : 20 / 6 meter
Wire on winch : 1 1/8” dia x 90 meter
Main hook lifting speed : 45 m/min (at 5 Ton)
Slewing speed : 0 – 1 rpm

Slewing rotation : 360 degrees continuous
Main boom hydraulic cylinders : Dual with built in safety valve

Knuckle hydraulic cylinder : Single with built in safety valve
Hydraulic power unit : 100 HP, 690 Volt 3 phase 60 hz
Limit switch, overload protection Included

Digital load cell : Included with read out in cabin
Operators cabin : Included with operator seat, joystick 
controls, heater, etc.
Surface coating : Manufacturers offshore spec.
Crane and pedestal weight : Approx 25 Ton
Present location : Western coast of Norway

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------
Search words (for official use only) :

Electro Hydraulic Offshore Crane for Sale 
65.62KSC11020 Knuckle boom Crane for Rental Services
2008 Built Offshore Crane
Crane for Sale or Rental in Norway
Deck Crane - 2008 Built for Sale

-------------------------------------------------------------------------------------------------------------------

Available for selling

Deck Crane for Sale or Rental
Contact Us
ID 2024
Kobelco CKE4000C Crawler Crane for Sale
Worldoils Marketplace
Kobelco CKE4000C Crawler Crane for Sale

Worldrigs ID: WR1509

Kobelco CKE4000C Crawler Crane for Sale
400 Tons Kobelco CKE4000C 400tons Crawler Crane


Specifications

Standard Crane

Max. Lifiting Capacity : 350t / 6.0m
Boom Length : 18m to 78m

HL Crane
Max. Lifiting Capacity : 350t/7.0m
Boom Length : 30m to 84m

SHL Crane
Max. Lifiting Capacity : 350t/12.0m
Boom Length : 30m to 84m

Light-Duty Crane
Max. Lifiting Capacity : 113.5t/14.0m
Boom Length : 30m to 96m

Luffing Jib
Max. Lifting Capacity : 113.5t/16.0m
Max. Combination : 66m + 66m/72m + 54m

HL Luffing Jib
Max. Lifting Capacity : 113.5t/16.0m
Max. Combination : 72m + 66m/78m + 54m

SHL Luffing Jib
Max. Lifting Capacity : 113.5t/16.0m
Max. Combination : 78m + 66m/84m + 54m

Main & Aux. Winch
Max. Line Speed : 130m/min (5th layer)
Wire Rope : 28mm
Brake Type : Spring set hydraulically release brake

Working Speed
Swing Speed : 1.3 min (rpm)
Travel Speed : 1.0/0.4 km/h

Power Plant
Model : HINO K13C-UV
Engine Output : 295kW/2,000min (rpm)
Fuel Tank Capacity : 600 litres

Hydraulic System
Main Pumps : 6 variable displacement pump
Max. Pressure : 31.9 MPa (325 kgf/sq.cm)
Self-Erection Device : Option

Weight
Operating Weight : Approx.346t
Counterweight : std.120t (Upper) + 41t (Lower)
Transport Weight : 60.0t (Main machine)
Ground Pressure : 150 kPa (1.52 kgf/sq.cm)

We also have used cranes.

Additional information regarding this equipment will be shown on request


Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------------------------
Search words(for official use only - 

Kobelco CKE4000C Crawler Crane for Sale
400 Tons Kobelco CKE4000C 400tons Crawler Crane
Crawler Crane - 400 Tons - for sale
400T Crawler Crane for Sale
Kobelco CKE4000C 400T Crawler Crane for Sale
Hydraulic Crawler Crane for Sale

----------------------------------------------------------------------------
Available for selling

Kobelco CKE4000C Crawler Crane for Sale
Contact Us
ID 1509
Kobelco 7120-2F Crawler Crane for sale
Worldoils Marketplace
Kobelco 7120-2F Crawler Crane for sale

Worldrigs ID: WR1502

Kobelco 7120-2F Crawler Crane for sale
120T Hydraulic Crawler Crane for Sale


Main Specifications

Crane Boom
Max. Lifting Capacity : 120 t/5.0 m
Max. Length : 61.0 m

Long Boom
Max. Lifting Capacity : 24 t/16.0 m
Max. Length : 79.2 m

Fixed Jib
Max. Lifting Capacity : 12 t/28.0 m
Max. Combination : 61.0 m + 30.5 m

Tower Jib
Max. Lifting Capacity : 20 t/15.0 m
Max. Combination : 51.7 m + 44.2 m
Tower Angle : 60° ~ 90°

Main & Aux. Winch
Max. Line Speed : 120 m/min (1st layer)
Rated Line Pull (Single-line) : 118 kN {12.0 tf}
Wire Rope Diameter : 26 mm

Wire Rope Length :
Crane - 275 m (Main) 255 m (Aux.)
Tower - 290 m (Main) 145 m (Aux.)

Brake Type :
Spring set hydraulically released multiple disc brake(Negative)

Free-Fall Brake Type : Wet-type multiple disc brake (Optional)

Working Speed
Swing Speed : 2.1 min-1 {rpm}
Travel Speed : 1.3/0.9 km/h

Power Plant
Model Hino P11C-UN
Engine Output : 247 kW/2,000 min-1 {rpm}
Fuel Tank Capacity : 400 liters

Hydraulic System
Main Pumps : 4 variable displacement
Max. Pressure : 31.9 MPa {325 kgf/cm2}
Hydraulic Tank Capacity : 535 liters

Weight
Operating Weight* : Approx.120 t
Ground Pressure* : 94 kPa {0.96 kgf/cm2}
Counterweight : 52.3 t
Transport Weight** : Approx. 36.8 t

* Including upper and lower machine, 52.3 ton counterweight, basic boom, hook,
and other accessories.
** Base machine with boom base, gantry, carbody, lower spreader and upper
spreader.

We also have used cranes.

Additional information regarding this equipment will be shown on request


Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------------------
Search words(for official use only - 

Kobelco 7120-2F Crawler Crane for sale
Hydraulic Crawler Crane - 120T - for sale
120tons Kobelco 7120-2F crawler crane for Sale
Crawler Crane - Kobelco 7120-2F - For Sale
Kobelco 7120-2F 120 Tons Crawler Crane for sale
120T Kobelco 7120-2F Hydraulic Crawler Crane for sale

-----------------------------------------------------------------------------
Available for selling

Kobelco 7120-2F Crawler Crane for sale
Contact Us
ID 1502
CKE2500 Kobelco Crawler Crane for sale
Worldoils Marketplace
CKE2500 Kobelco Crawler Crane for sale

Worldrigs ID: WR1501

CKE2500 Kobelco Crawler Crane
Hydraulic Crawler Crane for sale
250T CKE2500 Kobelco Crawler Crane


Specifications


Main Boom
Max. Lifting Capacity : 250 t/4.0 m
Max. Length : 91.4 m

Fixed Jib
Max. Lifting Capacity : 26.8 t/9.8 m
Max. Combination : 76.2 m + 30.5 m

Luffing Jib
Max. Lifting Capacity : 70 t/9.8 m
Max. Combination : 61.0m + 51.8 m, 51.8 m + 61.0 m
Luffing Angle : 63° ~ 88°

Main & Aux. Winch
Max. Line Speed : 110 m/min (1st layer)
Rated Line Pull : 132 kN (13.5 tf)
Max. Line Pull : 245 kN (25 tf)
Wire Rope : 25 mm
Wire Rope Length : 480 m (Main) 385 m (Aux.)
Brake Type : Wet-type multiple disc brake
Free-Fall : Option

Working Speed
Swing Speed : 2.1 min-1 (rpm)
Travel Speed : 1.1/0.7 km/h

Power Plant
Model : Mitsubishi 6D24-TLU2D
Engine Output : 235 kW/2,000 min-1 (rpm)
Fuel Tank Capacity : 400 liters

Hydraulic System

Main Pumps : 4 variable displacement
Max. Pressure : 30.9 MPa (315 kgf/sq.cm)
Hydraulic Tank Capacity : 550 liters
Self-Erection Device : Standard

Weight

Operating Weight : Approx. 208 t
Counterweight : 80.6 t (Upper), 20.0 t (Lower)
Transport Weight : 44.9 t (Main machine)
Ground Pressure : 95 kPa (0.97 kgf/sq.cm)

We also have used cranes.

Additional information regarding this equipment will be shown on request


Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------------------
Search words(for official use only - 

CKE2500 Kobelco Crawler Crane for sale

CKE2500 Kobelco Hydraulic Crawler Crane for sale
250 Tons Kobelco Crawler Crane for Sale

Hydraulic Crawler Crane for sale
250T CKE2500 Kobelco Crawler Crane for sale

-----------------------------------------------------------------------------
Available for selling

CKE2500 Kobelco Crawler Crane for sale
Contact Us
ID 1501
3T Knuckle Boom Crane for Sale
Worldoils Marketplace
3T Knuckle Boom Crane for Sale

Worldrigs ID: WR242

3T Knuckle Boom Crane for Sale
Small Knuckle Boom Crane

Description :

Crane type : RC 40-EH-10,8/6,2-15M-3T/9m-5T-RC
Safe working load : 3 T
Max working radius : 15m
Max working radius : 2,1m
 
Safe working load : 5 T
Max working radius : 9m
Max working radius : 2,1m
 
Pump capacity : 105 1/min
Hoisting speed : 30m/min
Slew sector : 360o
Slew speed : 1 rpm
List + Trim : 5o + 2o
 
Electric Motor Data
Electric motor type
Voltage : 690V/60Hz
Heating element : 1x40W
Power/Duty : 37,2 kW/S6-40%
Motor speed : 1750rpm
Rotation (seen from fan end) : Right
Motor start method : D.O.L
Nominal current : In=40A
Start current : Is=202,8A
 
Weight and Outline Dimensions :
Total weight : ~ 10200 kg
Outline dimensions of crane
General arrangement drawing G-9611
Assembly drawing S-9312
 
Price & terms : Please enquire using the email form below.
If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------------
Search words(for official use only) :
Knuckle Boom Crane for Sale
Ofshore Knuckle Boom Crane
Small Knuckle Boom Crane 
3T Knuckle Boom Crane for Sale
Small Ofshore Knuckle Boom Crane 
-----------------------------------------------------------------------------------------

Available for selling

3T Knuckle Boom Crane for Sale
Contact Us
ID 242
National OS-435 H.D model Pedestal Offshore Crane
Worldoils Marketplace
National OS-435 H.D model Pedestal Offshore Crane

Worldrigs ID: WR1485

Offshore Pedestal Crane for Sale
OS-435 Refurbished Offshore Pedestal Crane for sale


The crane is completely refurbished and complies with API-2C

Specifications


• Hydraulic pedestal crane model : National OS-435 H.D
• Original year of manufacture : 1981
• Boom length : 42.675m (140ft)
• Weight : 105,400 Lbs / 47, 810Kg (incl. Boom)
• Main hoist capacity : 28,875Kg @ 19.5m (platform duty)
• Whip hoist capacity : 7,275Kg @ 46.5m (platform duty)

Overhaul included :
- Full engine overhaul including Dyno Test
- Triple Gearbox refurbished
- Booms & A-frame blasted, painted & NDT inspection completed
- Bridle Assembly inspected and NDT
- All sheaves & shafts inspected and NDT
- Slew bearing refurbished and NDT
- Boom, Main and Whip rope winches inspected
- Brake band linings renewed
- All brake cylinders refurbished and pressure tested including Pawl cylinder
- Installation of slewing limit swit ches (change to original (OEM) spec)
- New hydraulic hoses installed and pressure tested
- Hydraulic pumps and motors refurbished and performance tested
- New wire ropes (Main & Whip hoist) and Pendant lines installed
- Refurbished operators cabins with new gauges , and air conditioning unit
- New Mipeg Rated Capacity Indicator (RCI) System
- Painted to marine specification

• Rated for Zone 2 safe operations
• MOM certified (Singapore Ministry of Manpower)
• All structural inspection reports available
• Installation / change out services available

Available Immediately

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------------
Search words (for official use only)
Offshore Pedestal Crane for Sale
National OS-435 H.D model Pedestal Offshore Crane - For Sale
140ft Offshore Pedestal Crane for Sale
Refurbished Offshore Pedestal Crane for Sale
1981 built Offshore Pedestal Crane
National OS-435 Refurbished Offshore Pedestal Crane for sale

---------------------------------------------------------------------------------------------------------------

Available for selling

Refurbished Offshore Pedestal Crane for Sale
Contact Us
ID 1485
Gottwald Crane RG912
Worldoils Marketplace
Gottwald Crane RG912

Worldrigs ID: WR1928

Gottwald model RG912 Crane for Sale
1200 Metric Ton
Gottwald Crane

Description :

We have a 1200 metric ton capacity Gottwald crane, 
model RG912, for sale in the Middle East.

Price & terms : Please enquire using the email form below.
If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------------------
Search words(for official use only - 
Gottwald model RG912 Crane for Sale
RG912 Model Crane for Sale
1200 Metric Ton Gottwald Crane for Sale
Gottwald model RG912 Crane for Sale
Gottwald Crane for Sale in Middle East
-------------------------------------------------------------------------------------------------------


Available for selling

Gottwald Crane RG912 for Sale
Contact Us
ID 1928
Liebherr Offshore crane for Sale
Worldoils Marketplace
Liebherr Offshore crane for Sale

Worldrigs ID: WR1491

Liebherr Offshore Crane for Sale
BOS 2600-65D Litronic - Crane for Sale


Description


Quantity : 1
Specification (API, etc) : 1204 HP 335
Make : Liebherr
Type : BOS- 2600-65D Litronic

Location (stbd, port, aft, frwd) : Port-Forward
Boom Length (ft) : 45.71m (150 ft)
Block capacities and hoisting speeds : Onboard transfer load rating
Load/radius/speed - minimum radius : 65 mt  /  8.1m /  0-13m/min with full load / 0-23 empty hook
Load/radius/speed - maximum radius : 65 mt / 40m  /  0-13m/min with full load / 0-23 empty hook
Whip capacity/hoist speed - ld/rad./spd  : 15 mt  /  9.8 m / 44.9 m

Hook load indicator automatically corrected for boom angle : Yes
Alarm (audible,visual,both) : Both
Automatic brake : Yes
Safety latch on hooks : Yes
Crown saver (limit switch) : Yes
Boom illumination : Yes

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

--------------------------------------------------------------------------------------------------------
Search words - 

Offshore Crane for Sale
Liebherr BOS 2600-65D Litronic Crane for Sale
Liebherr Crane for Sale
BOS 2600-65D Litronic Crane 
Liebherr Offshore Crane for Sale
Offshore Crane in Working Condition

--------------------------------------------------------------------------------------------------------

Available for selling

Liebherr Offshore Crane - BOS 2600-65D Litronic - For Sale
Contact Us
ID 1491
60 Ton New Offshore Hydraulic Wireluffing Crane
Worldoils Marketplace
60 Ton New Offshore Hydraulic Wireluffing Crane

Worldrigs ID: WR1398

60 Ton New Offshore Hydraulic Wireluffing Crane
New Offshore Diesel Hydraulic Crane

Technical Specifications
Design Rules : API-2C Offshore
Classification Society : DNV

Hazardous Area Classification : Zone 2 IIA-T3

Design temp : +10°C
Operating temp : +14 to 36°C
Roll/pitch : 1.0/1.0 deg

FEM Classification
Appliance group : A4-Q2-U4
Machinery group : M4-L2-T4

Power supply 1 : 480V-60Hz-3Ph
Power consumption 1 : 14.5kW
Power supply 2 : 240V-60Hz-1Ph
Power consumption 2 : 1.2kW

Total weight : 150T

Main Hoist
SWL max : 60/40T
No. of falls : 3/2
Outreach max. : 45.7m
Outreach min. : 9.0m
Wave height max. : 2.5m
Load/outreach : See loadchart
Hook travel : 70m
Hoist speed (3 falls, 60T) : 0-22 m/min
Hoist speed (2 falls, 40T) : 0-33 m/min

Aux Hoist
SWL max. : 7.5T
Manriding : 1.0T
No. of falls : 1
Outreach max. : 46.7m
Outreach min. : 10.0m
Wave height max. : 2.5m
Load/outreach : See loadchart
Hook travel : 70m
Hoist speed : 0-60 m/min

Slewing
Slewing sector cont. : 360 deg.
Slewing speed : 0-1 rpm

Luffing Time
From max. to min. :
No load; 45.7m to 9m  50 sec

Note : Speeds, weight and power consumption are appr. within +/-5%

Crane Interface Loads ( Crane Foundation)
Including 1.5 Safety Factor Acc. to API 2C Rules
:-
Dynamic Titlting Moment : 46231 kNm
Dynamic Axial Load : 3180 kN
Radial Load : 150 kN
Slewing Torque : 1980 kNm

Crane Pedestal Loads Including 1.5 Safety
Factor Acc. to API 2C Rules : -

Dynamic Titlting Moment : 45832 kNm
Dynamic Axial Load : 3024 kN
Radial Load : 148 kN
Slewing Torque : 1980 kNm

Boomrest Interface Loads :-
FY : 575 kN
FX : 375 kN
FZ : 15 kN

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------------------------------------------
Search words (for official use only) :
60T Offshore Wireluffing Diesel Hydraulic Crane - New
New Offshore Hydraulic Wireluffing Crane for Sale
New Offshore Diesel Hydraulic Crane - 60 Ton - For Sale
Offshore Crane for Sale
60 Ton New Offshore Hydraulic Wireluffing Crane - For Sale

--------------------------------------------------------------------------------------------------------------------------

Available for selling

60T Offshore Wireluffing Diesel Hydraulic Crane - New
Contact Us
ID 1398
40T Offshore Wireluffing Diesel Hydraulic Crane - New
Worldoils Marketplace
40T Offshore Wireluffing Diesel Hydraulic Crane - New

Worldrigs ID: WR1397

40T Offshore Wireluffing Diesel Hydraulic Crane - New
New Offshore Diesel Hydraulic Crane For Sale


Technical Specifications
Design Rules : API-2C Offshore
Classification Society : DNV

Hazardous Area Classification
Boom tip incl. hooks : Zone 2 IIA-T3
Rest of crane : Safe zone

Design temp : +10°C
Operating temp : +14 to 36°C
Roll/pitch : 1.0/1.0 deg

FEM Classification
Appliance group : A4-Q2-U4
Machinery group : M4-L2-T4

Power supply 1 : 480V-60Hz-3Ph
Power consumption 1 : 14.5kW
Power supply 2 : 240V-60Hz-Ph
Power consumption 2 : 1.2kW

Total weight : 120T

Main Hoist
SWL max : 40/25T
No. of falls : 3/2
Outreach max. : 45.7m
Outreach min. : 9.0m
Wave height max. : 2.5m
Load/outreach : See loadchart
Hook travel : 70m
Hoist speed (3 falls, 40T) : 0-22 m/min
Hoist speed (2 falls, 25T) : 0-33 m/min

Aux Hoist
SWL max. : 7.5T
Manriding : 1.0T
No. of falls : 1
Outreach max. : 46.7m
Outreach min. : 10.0m
Wave height max. : 2.5m
Load/outreach : See loadchart
Hook travel : 70m
Hoist speed : 0-60 m/min

Slewing
Slewing sector cont. : 360 deg.
Slewing speed : 0-1 rpm

Luffing Time
From max. to min. :
No load; 45.7m to 9m  50 sec

Note : Speeds, weight and power consumption are appr. within +/-5%

Crane Interface Loads ( Crane Foundation)
Including 1.5 Safety Factor Acc. to API 2C Rules

Dynamic Titlting Moment : 32636  kNm
Dynamic Axial Load : 2427  kN
Radial Load : 106  kN
Slewing Torque : 1246  kNm

Crane Pedestal Loads
Including 1.5 Safety Factor Acc. to API 2C Rules

Dynamic Titlting Moment : 32360  kNm
Dynamic Axial Load : 2272  kN
Radial Load : 103  kN
Slewing Torque : 1246  kNm

Boomrest Interface Loads
FY : 575  kN
FX : 375  kN
FZ : 15  kN

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------------------------
Search words (for official use only) :
40T Offshore Wireluffing Diesel Hydraulic Crane - New
Over 45M New Offshore Hydraulic Crane for Sale
Offshore Hydraulic Wireluffing Crane for Sale
New Offshore Diesel Hydraulic Crane - 40 Ton - For Sale

-------------------------------------------------------------------------------------------------------------

Available for selling

40T Offshore Wireluffing Diesel Hydraulic Crane - New
Contact Us
ID 1397
  
1 2 3
  



Untitled Document
Land rigs for sale
 
1500hp Electrical AC/SCR Drilling Rig for Lease
Worldoils Marketplace
1500hp Electrical AC/SCR Drilling Rig for Lease

Worldrigs ID: WR1059

Electrical AC/SCR Drilling Rig for Charter
Electrical AC/SCR Drilling Rig - 1979 built
1500hp AC/SCR Electrical Rig for Lease
Electrical Drilling Rig for Charter

Specifications
Built 1979
Classification : API 4E
Drilling Depth : 15000ft / 4500m

Power Supply Systems
Engine Plant :
Make : EMD & Model : D79
Quantity : 3
Type : 12-645E8/ 12V183TD32
Max. cont. Power : 1650 HP / 900 rpm

Mud System
Mud Pumps -
Make : National & Qty. : 2 nos.
Type / Model/ Rating : Triplex/ 10-P-130/ 1300 HP
Drive : 2xElectric DC Motors

Mud Pumps
Make : Continental Emsco & Qty. : 1 no.
Type / Model/ Rating : Triplex/ 1300 HP
Drive : CAT D3516
Torque Convertor :  National C300-125FH

BOP Equipment
Annular BOP :
21-1/4” X 2M Make : Hydril & 13-5/8” X 5M – Make: Hydril, Type : GK

Double Ram BOP :
13 5/8” Double Ram BOP,  Wt. 12 T,  Make: Cameron, Type : U

Single Ram BOP :
13 5/8” Single Ram BOP,  Make :  Cameron, Type : U

Solid Control Equipment
Shale Shakers :
Qty. : 2 nos., Make & Type : Brandt King Cobra,
LMSS & Capacity : 1000/1200 GPM

Degasser :
Qty. : 1 nos., Make & Type : MI Swaco & Vacuum
Type & Capacity : 1200 GPM

Centrifuge : MI-Swaco, Model: 518

Mud Cleaner :
Qty. : 1 nos., Make : Brandt, Model :  LCM-2D 16 2E
& Capacity : 800 GPM.

Drilling Equipment
Derrick Make : Dreco
Type : Cantilever
Dimensions : 142 Ft x 25 Ft
Static Hookload : 1,300,000 Lbs (650 T - Short)
No. of lines : 12

Substructure : Dreco
Clear Height : 19 Ft.
Setback Capacity : 950000 Lbs
Rotary Capacity w full Setback : 1300000 Lbs

Drawworks : Oilwell
Type : 840E
Rating : 1500 HP
Drive : 2 nos. DC Motors
Drilling Line : 1 3/8”
Electric brake : Baylor Brake7838

Crown Block : Dreco
Type : Flat
Rated capacity : 500 T
Sheaves / Groove : 6 /1-3/8”

Traveling Block : Oilwell
Model /Type : B 500
Rated Capacity : 500 Tons
No. of Sheaves : 6

Hook : BJ/ 5500

Top Drive : Tesco, TDS – 3
Rated Capacity : 1000000 Lbs / 1020 HP
Drive : Electric, 1xGE752 DC Motor

Swivel : National
Type : P-500
Dead Load rating : 500 Tons
API Bearing Rating : 335 Tons

Rotary Table : National
Type : C-375
Drive : Electric
Opening : 37 1/2”

Mud Tank System
Shale Shaker Tank Qty. : 1 no., Capacity : 467 bbls.
Intermediate Tank Qty. : 1 no., Capacity : 438 bbls.
Suction Tank Qty. : 1 no., Capacity : 446 bbls.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

Land Drilling Rigs
--------------------------------------------------------------------------------------
Search words (for official use only) :
Electrical Drilling Rig for Charter
1500hp AC/SCR Electrical Rig
1500hp Electrical AC/SCR Drilling Rig for Charter
Electrical AC/SCR Drilling Rig - 1979 built
1979 built Electrical AC/SCR Drilling Rig for Lease
AC/SCR Electrical Rig for Charter
Electrial Drilling Rig for Lease - 1979 built

-------------------------------------------------------------------------------------

 
Skid Mounted Electrical Rig - National 1320UE
Worldoils Marketplace
Skid Mounted Electrical Rig - National 1320UE

Worldrigs ID: WR1058

National 1320UE Skid Mounted Electrical Rig for Lease
Electrical Drilling Rig for Charter
National 1320UE Electrical Drilling Rig - 1978 built
2000hp Skid Mounted Electrical Rig - National 1320UE

Specification
Built : 1978
Classification : API 4F
Drilling Depth :
19600 Ft / 6000m w/ 5” Drill Pipe

Power Supply Systems
Engine plant : Caterpillar
Quantity : 5
Type : D-399 TA
Max. cont. Power : 1215 HP/ 1200 rpm

Mud System
Mud Pumps -
Make : Honghua & Qty : 2 nos. & Make : National & Qty : 1 nos.
Type/Model/Rating : Triplex/ 1600 HP (2 nos.) & 1300 HP (1 no.)
Drive :
2xGE752 AUI
SCR with 5 Bay

BOP Equipment
Annular BOP -
21 ¼” - 2M W.P. Make : Shaffer, WP : 2,000 psi & 13 5/8"- 5M W.P.
Make : Shaffer, WP : 5,000 psi.

Double Ram BOP -
Make : Cameron,
Type : U c/w 13.5/8" 10 M

Solid Control Equipment
Shale Shakers :
Qty. : 2 nos., Make : NOV Brandt, Model : King Cobra Linear Motion
& Capacity : 1000/1200 G.P.M.

Degasser Qty. :
1 nos., Make : NOV Brandt,  Type : DG-5 & Capacity : 500 G.P.M.

Centrifuge : MI-Swaco, Model : 518

Mud Cleaner : Qty. : 1 nos., Model : Mini Cobra 3-Panel 10/ 2 (LMSS)

Drilling Equipment
Derrick : Branham Industries
Type : Cantilever, 3-78-DI-M002
Dimensions : 156 Ft x 32 Ft.
Static Hookload : 1,330,000 Lbs (665 T - Short)
No. of lines : 12

Substructure : Branham Industries
Clear Height : 25 Ft.
Setback Capacity : 800000 Lbs
Rotary Capacity w full Setback : 13300000 Lbs

Drawworks : National
Type : 1320 UE
Rating : 2000 HP
Drive : 2 x GE 752
Drilling Line : 1 3/8”
Electric brake : Baylor Brake7838

Crown Block : National
Type : 760- FA
Rated capacity : 500 T
Sheaves / Groove : 7x60”, 1-3/8”

Traveling Block : National
Model/ Type : B 660 G 500
Rated Capacity : 500 Tons
No. of Sheaves : 6

Hook : National

Top Drive : Varco, TDS – 3
Rated Capacity : 500 Tons/ 800 HP
Drive : Electric, 2 x 400 HP AC

Swivel : National
Type : P-500
Dead Load rating : 500 Tons
API Bearing Rating  : 335 Tons

Rotary Table : National
Type : C-275
Independent Electric Drive : 1xGE752 AU
Opening : 27-1/2”

Mud Tank System
Active Tanks Volume : Qty. : 3 nos., Capacity : 1200 bbls.
Reserve Tanks Volume : Qty. : 2 nos., Capacity : 970 bbls.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

 Land Drilling Rigs


----------------------------------------------------------------------------------------------------------
Search words (for official use only) :
National 1320UE Skid Mounted Electrical Rig for Lease
Electrical Drilling Rig for Charter
National 1320UE Electrical Drilling Rig - 2000hp
2000hp Skid Mounted Electrical Rig - National 1320UE
1978 built Skid Mounted Electrical Drilling Rig for Lease
National 1320UE Skid Mounted Electrical Rig - 1978 built
Electrical Drilling Rig for Lease
1978 built Electrial Drilling Rig for Charter

------------------------------------------------------------------------------------------------------------

 
Ingersoll-Rand TH75 Used drilling rig for sale
Worldoils Marketplace
Ingersoll-Rand TH75 Used drilling rig for sale

Worldrigs ID: WR827

Ingersoll-Rand TH75 Drilling Rig for Sale
1991 Built Used Drilling Rig for sale

Model : TH75
Manufacturer : Ingersoll-Rand
Year : 1991
Condition : Used

Description : 

Cummins KT19 Diesel Deck Engine at 525 hp
IR 900 cfm / 350 psi Air Compressor
4x3 mission centrifugal pump
recently rebuilt swivel
new pull down cables
set up for 3 1/2" or 4 1/2" drill pipe
3 1/2" IF drill pipe available at additional cost
8,700 hours
newer paint
Mounted on a Paystar 5000 Truck
10 speed transmission with low low
mileage 40,000
Location : USA

Price & terms : Please enquire using the email form below.    

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

Water Well Rigs          Water Well Rigs

-----------------------------------------------------------------------------------------------
Search words(for official use only) :
Ingersoll-Rand TH75 Drilling Rig For Sale
1991 built Drilling Rig for sale
Used Drilling Rig 1991 built
Ingersoll-Rand TH75
Land Drilling Rig For Sale 1991 built
Used Ingersoll-Rand TH75 drilling rig for Sale
-----------------------------------------------------------------------------------------------

Ingersoll-Rand T4W Drill Rig for Sale
Worldoils Marketplace
Ingersoll-Rand T4W Drill Rig for Sale

Worldrigs ID: WR1025

Ingersoll-Rand T4W Drill Rig for Sale
Used Drilling Rig Built 1986 

Model : T4W Drill Rig
Manufacturer : Ingersoll-Rand
Year : 1986
Condition : Used

Description :

1986 Ingersoll-Rand T4W drill rig
Cummins KT19 Diesel Deck Engine (Rebuilt in 2007 with 2,620 hours since)
IR 900 cfm / 350 psi Air Compressor (Rebuilt in 2007 with 2,620 hours since)
Spur Gear Power Head
4 & 7 Rod Carousel
Newer Hydraulic Pump & Cooling Fan Drive Motor
1,100' ft of Used Drill Pipe (25' x 4-1/2" x 3-1/2") & basic tooling included
Mounted on a CCC (Crane Carrier Company) Truck
Cummins L10 Diesel Engine
8 Speed Transmission
Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

Water Well Rigs           Water Well Rigs

---------------------------------------------------------------------------------------------
Search words (for official use only) :
Ingersoll-Rand T4W Drill Rig For Sale
1986 Ingersoll-Rand T4W Drill Rig For Sale
Used Drilling Rig Ingersoll-Rand T4W for Sale
Land Drilling Rig Built 1986 for Sale in USA
--------------------------------------------------------------------------------------------

 
Land Rig for Sale
Worldoils Marketplace
Land Rig for Sale

Worldrigs ID: WR118

ZJ40 Land Rig for Sale - 1000hp
Self Propelled Drilling Rig for Sale
1000hp Land Drilling Rig

Technical Specifications
Structure type : Self propelled and truck mounted 
Drilling  depth : 3200 mtrs with 5” x 25.6 ppf nominal weight, Range II DP
Static hook load : API static load capacity 250 MT with 10 line strung to traveling block
Power Engine : 630 HP X 2
Drawworks horsepower : 1000 hp (input)
Gears, drawworks : 5 forward, 1 reverse

Traveling system : 5 x 6
Drive type, carrier : 14x10
Dia., wireline : φ32mm
Mast height : 39.3 mtrs , compatible for Top Drive operation
Monkey Board height : Adjustable, customer to be specified the require adjustable range     
Rotary table opening : 27.5”
Gears, rotary table : 5 forward, 5 reverse

Drill floor height : 6.7 mts
Min. turning diameter : 22 m
Ground clearance : 340mm
Max. Gradient : 26%  
Max speed : 60km/h (Limiting speed: 45km/h)

Traveling dimensions : as per the roading dimension with mast in colleps condition
Traveling weight : 83500kg(with mast)
Ambient temperature : -29 ˚C~ +50 ˚C

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

Land Drilling Rigs

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
1000hp Drilling Rig for Sale
ZJ40 Self Propelled Drilling Rig for Sale
Truck Mounted Land Drilling Rig - 1000HP
Land Drilling Rig for Sale
1000hp Self Propelled and Truck Mounted Drilling Rig
ZJ40 1000hp Drilling Rig

---------------------------------------------------------------------------------------------------------

 
Workover Rig for Sale
Worldoils Marketplace
Workover Rig for Sale

Worldrigs ID: WR138

550hp Workover Rig for Sale
2008 built Workover Rig
Used Workover Rig


Service Conditions :
The rig  is capable for undertaking work over operations in Oil/ Gas /
Injection / Effluent disposal wells/CBM wells etc. up to depth of 3000 mts
approximately with tubing string of 2 7/8" to 3-1/2" in 5" to 9 5/8" casings,
depending on the weight of completion equipment. The work over jobs
include but are not limited to servicing/ installation of artificial lift equipment,
cleaning of well bore, gravel packing, sand screening, stimulation, well
abandonment, transfer of horizons, water shut off, gas shut off, water
injection profile modification and re-completion, retrieval of gravel pack
assembly, fishing & releasing of stuck up, multi-layer testing, casing
repair etc. in vertical/deviated/horizontal multilateral / ERD / USRD wells etc.

1. Workover Rig
The Rig XJ 550 is a brand new self propelled rig and capable of workover
/ testing / completion/service upto 5800m using 2 7/8 " drill pipe and  and
4500m using 3 1/2" drill pipe. The rig is having the hook load capacity of
135 ton and manufactured as per latest API standards applicable in the
oilfield Industry.

The rig is equipped with :
a) Four leg leaning type, Hydraulically telescoping, two section, foldable,
SJ Petroleum Machinery Co., China make, Model JJ135/34 Mast with
clear height of 112 ft from ground level and rated static hook load capacity
135 T with 8 lines strung on traveling block.

The mast is designed as per latest API 4E/4F standard code and practice.
The Mast can is equipped with suitable Finger Board which can accommodate
5200 mts of range-II, 2 7/8" tubulars in doubles. 

b) Twin safety device (floor-o-matic and crown-o-matic) is available.
c) Top man escape device will be provided.
d) Suitable locking system would be provided with additional safety manual
lock for telescoping of mast to full height.
e) The mast is designed to withstand wind speed of minimum 60 knots as per
Clause 6.2.3 of API 4F with full pipe/ setback with all guy ropes properly placed
as per standard API pattern.
f) Hydraulic Cat works :
For make up & breakout consisting of hydraulic make up (spinning) cylinder
providing 10000lbs (4444kg) minimum line pull and hydraulic break out cylinder
to develop a minimum line pull of 20000lbs. Control for make up & breakout is
located at Driller's console.
g) Draw works with suitable rating for handling 100MT hook load capacity,
equipped with suitable auxiliary hydromatic brake for safe running in of the string.
The Draw works should have sufficient range of forward speed and one reverse
speed.

XJ 550 Draw Work Input HP rating 550 HP. Nominal depth rating 2000 mts with
tubing, fitted with compatible mechanical brake system and driven by a suitable
Detroit make diesel engine. Draw works having 4 forward and one reverse speed.
Draw works drum having main drum Lebus Groove for 1 1/8” line. Main drum
brake having maximum wrap around feature energizing type brake. Crown-o-matic
protection device to protect the Crown is also provided.
g) The draw works is powered by 1 no. of "CATERPILLAR"make, model
C-15 ACERT diesel engine of 540 HP at 2100 rpm with ALLISION make, heavy
duty transmission consists of torque converter, model "M5610AR" and suitable
power trend  through compound/chain drive and gear boxes.

The power pack is perfectly suitable for effective hook load of 135 MT and to work
on 5000m deep well. The power pack is completed with standard gauges, meter,
safety equipment and spark arrestor. Engine is equipped with independent
interlock pneumatically operated starting system during the workover mode and
the electric starting system during the roading.

h) SJ Petroleum Machinery Co. make Model "YG-150"hydrahook with combination
block having 4 nos. of sheavesof 30" diameter. The hook has built in hydraulic
snubber,conventional rotation lock and safety positioner etc.,rated capacity is
150 tonne and is capable to operate 2-7/8" to 3-1/2" tubing and 2-7/8" to 3-1/2"
drill pipes up to required depth.

j) Racking Board is of adjustable type and completed with topman emergency
escape device from monkey board to  ground, railings & safety belts. The Racking
Board is having sufficient provision to rack 3 1/2" / 2 7/8" tubulars/drill pipes for
5000m Drill pipe/ 6000m tubing and having provision for height adjustment at three
different convenient positions.

2. Substructure
S J Petroleum  make Sub-Structure,made as per API-4F rigid type, completed
with all respect to carry out drilling jobs, 13' below the rotary beam.  Substructure
having sufficient space to accommodate the 3 stack BOP (one Pipe Ram + One
Blind Ram+ one Annular) with riser nipple in workover mode. The structure is
completed with rotary beam, railing,side platform, setback area and stair way.
The sub-structure can accommodate 17 ½” Rotary Table on it.

3. Rotary Equipment
SJ Petroleum Machinery Co., China make, Model "ZP175"or equivalent rotary
table with 17.5" opening without master bushing.

The table is completed with master bushingand kelly bushing.The rotary table is
driven by chain-sprocket and the mechanism is powered by the drawworks.

4. Kelly
40 feet Square / hexagonal Kelly 3" size as per API 7 suitable for working upto
350 kg / cm2 (5000 psi) working pressure with required connections along-with
saver subs will be provided. Upper and lower Kelly cock of suitable size with
pressure rating of 5000 psi will also be available.

5. Swivel
a) SJ Petroleum Machinery Co., make, Model "SL-135", rotary swivel having
static/dead load capacity of 135 tonnes and working pressure rating 5000 psi
and completed with bail bumper support, goose neck connection to rotary
hose etc. Swivel bottom pin connection 6 5/8" API regular left hand.

(b) With 3” diameter quick change goose neck assembly with working pressure
5000 psi.

6. Hydraulic Winch
The Rig is provided with minimum 1 no. of hydraulic winch with catline for
handling tubulars having pulling capacity not less than 3MT.

7. Mud System
Mud system is capable to handle drilling mud Sp. Gr. upto approximately 1.8.

7.1 Mud Pump
(a) BOMCO China Make, model "F-500" triplex slush pump rated at 500 HP,
unitized to a reputed Make diesel engine having sufficient capacity, through
belt drive compound with shaft or chain drive is acceptable and 5 speed heavy
duty gear box with Centrifugal supercharging pump, having pulsation dampener,
safety relief valve, pressure gauge etc.

Mounted on a steel oil field skid, 20 gallon, heavy duty Type-F 6000 psi mud
gauge,  Pumps dressed with 3 1/2" to 6" liners as per operational requirement.
 
The pump is capable of handling work over operation in 5 1/2"casing with 2 7/8"
tubular upto a depth of 6500 mts. with mud of specific gravity- 2.3.

(b) Capacity of Pump
Discharge : Minimum   12 cbm / hr. at 5000 psi.
Minimum   52 M3 / hr. at 2000 psi.

7.2 Discharge System
a) Rotary hose of suitable size having working pressure of 350 Kg/Cm2 (5000 psi)
with suitable connections will be provided.
b) Suitable end connections of suction line and delivery manifold will be provided.
c) Stand pipe of suitable size and pressure rating along with pressure gauge is
also present.

7.3 Mud/Work over fluid storage/ Handling arrangement
i) Tanks having capacity (volume) not less than 80 cubic meter with permanent
level markings from bottom will be provided.
ii)  Arrangement is provided for brine/mud preparation, mud mixing, mud agitators
/ bottom gun jets of best engineering
iii) Transfer pump for working fluid / mud from tankers into tank and tank
to tank and back to tanker (if required) along with pumping system.
iv) Necessary system lines wherever required.
v) Calibrated mud hopper of suitable size with butterfly valve and proper line
connection will be provided with gunning arrangement.
vi) One trip tank of approximately 8 m3 with suitable connections and valves
will be available. It will be equipped with sufficient capacity of centrifugal transfer
pump & motor suitable for hazardous area.
vii) Skid mounted / portable filtration unit for brine to get the out let brine solution
of 5 micron quality at flow rate 40M3/hr at working pressure 10Kg/cm2 after fine
filter with suitable motor for hazardous area .

8. Fuel Storage
Sufficient fuel storage to undertake the workover operations will be provided

9. Water Storage
Tank with storage Capacity of 40 m3 equipped with transfer pump of suitable
capacity with necessary hook up lines/ system will be provided.

10. Well Control Equipment

The following well control equipment will be provided :

a) Hydraulically operated Cameron / Shaffer / Hydril make, one double ram type
Blow Out Preventor of 7-1/16" X 5000 PSI working pressure having one set of blind
ram and one set pipe rams to handle size 3-1/2" and 2-7/8".
b) Hydraulically operated Cameron / Shaffer / Hydril make, one annular Blow
Out Preventor of 7- 1/16"X5000 PSI working pressure.
c) Or one no of 3 stack unitized BOP containing items as mentioned at a) & b) above.
d) One set of stem & wheel for manually closing BOP as per OISD standard-174.
e) One. No of  shanghai shenkai petroleum chemical equipment, 6/8 bottle hydraulic
control unit,     capable of operating the BOP with suitable Pneumatic and electric
motor driven pump. The system pressure is 3000 PSI. Necessary 1" BOP control
hose to connect BOP with control unit.

1 (one) nos., of remote control unit placed on drillers console. Unit will have two
charging systems i.e. Pneumatic and electric with auto start and stop facility.
Flame proof DGMS approved motor will be used. One set of stem and wheel to
operate the BOP mechanically.

f) Adapter flange/ spool/dummy spools of following size will also be  available :-
Change over spool 7-1/16" 5000 psi x 7-1/6" 10000 psi - 1 no

g) 1 no. BOP test plugs or Cup tester/ accessories will also be provided.

h) Plug valves, tubing shut off valve and FOSV of 5000 PSI having necessary
connections and changeovers for 2-7/8" & 3-1/2" NU /EUE tubings/ Drill pipes
will also be provided.

11. Choke and Kill Manifold
Choke & Kill manifold is as per API of size minimum 2-1/16" having minimum
5000 psi WP along with sufficient quantity of flexible steel piping of minimum
5000 psi WP of suitable size fitted with NRV in kill lines. It has a suitable
combination of valves having provision to flow the well through fixed choke,
variable choke and one bypass also. There is also a provision to kill the well
through kill line as well as one additional line for making connection through
cementing.

12. Handling tools as per API 8C
a) Center latch elevator for minimum 100MT capacity and minimum 01 no.
for each category will also be provided.

Sizes
2-7/8" : Upset Tubings
2-7/8" : Plain Tubings
3-1/2" : Plain Tubings
2-7/8" : I.F Drill Pipe
3-1/2" : I.F Drill Pipe
3-1/2" : Upset Tubing

b) Elevator links Elevator links-forged as per API 8C, rated capacity-minimum
100MT, size 1-3/4"x72". qty 2 nos will be provided.

c) Power (Pneumatic) slips
We will provide Light Weight pneumatic slip/spider, with sufficient spares,
inserts suitable for 2-7/8" and 3-1/2" tubing and drill pipes along with all
associated connections, hoses and Couplings. Operating valve at driller's
console.

d) Hydraulic tubing tong (Qty-1)
A Light weight hydraulic tubing tongs as per relevant API for 2 7/8" and 3-1/2"
tubings with replaceable jaws minimum torque rating 8000 ft lbs along with
sufficient spares would be provided.

e) Heavy duty Tong. (Qty-02)
Range 2-3/8" to 4-1/2", and to handle all fishing tools and milling tools as per
relevant API, torque rating minimum 35000 ft-lbs with hanger arrangement
along with sufficient spares will also be provided.

f) Handling Tools for Sucker Rods and Polished Rods
Tongs & elevators for handling 5/8", 3/4", 7/8", 1", 1-1/8" & 1-1/4" sucker rods
and polished rods will be provided.

13) Cross Over Subs
Bit subs, cross over subs and all necessary subs to handle work with 2-7/8" &
3-1/2" tubing and drill pipe string or their combinations will be provided.

14) Rig instrumentation suitable for Hazardous area.
a) Deadline weight indicator with sensator/ load cell on driller console/control panel,
indicating load on hook for the designed capacity of the rig will be provided.
b) Suitable recorder for recording hook load will be provided and it will be mounted
in weight indicator box
c) Mud pump pressure indicator would be complete, on drillers console/control
panel. 0- 6000 PSI.
d) Mud pump pressure gauge is mounted on stand pipe of 0-6000 PSI.
e) SPM indicator for mud pump discharge at drillers console/ local mud pump
control panel.
f) Indicators for B.O.P rams open/close for blindram, pipe rams & annular BOP on
drillers console/control panel is provided.

15. Safety Equipment
The rig is equipped with following fire fighting & safety equipment :
I. Fire fighting system as per OISD standard -189 :-
Para 6.0 i) Fire water storage facilities with fire pump.
ii) Portable Fire extinguishers.
Para 11.0 - Material specification of Fire water system.
Para 12.1 - Fire alarm system.
II. Explosion proof rig lighting at all hazardous locations as per Indian Oil Mines
Regulation in force.
III. Flame proof portable lamps (minimum 2 nos.)
IV. Emergency Kill system for derrick engine (control from driller's panel).
V. Electrical system will have suitable ELR (Earth leakage relay)
VI. First aid box with stretcher facilities as per OISD standards - 204 para 6.5 and 
Annexure - H.
VII. Safety kits & liveries (as per standard statutory body) will be provided for
operating personnel. Top man safety belt also to be provided.
VIII. All the rotating parts must have proper safety Guards.

16. Drill String
a) Drill pipes 2-7/8" OD IF Right Hand, G grade of 10.4 ppf, premium Class I,
Range II, 3000 meter will be provided with rig along with latest NDT certificate.
b) Drill collars of sizes 3-1/2" of total length 50m with cross over to run 2-7/8"
& 3-1/2" drill pipe will be provided.

17. Other Equipments
The following equipment will also be provided :
a) Air system: Air compressor system of suitable capacity with air tank for operating
pneumatic Cellar pump, Hydraulic pump of BOP control unit etc.
b) Rig warehouse and POL store.
c) Rig In-charge Office.
d) One A/C bunk house for coordinator.
e) One bunk house for Contractor's operating personnel.
f) V door & cat walk with pipe racks on both sides.
g) Necessary transport equipment for movement of rig from one location to another.
h) Cellar pump- Air operated (Pneumatic) with suction hose of sufficient length.
i) Circulating head 5000 psi working pressure for 3-1/2" and 2-7/8" Drill pipes and
tubings with necessary change over
j) All trailor mounted equipments including rig trailor will meet the RTO regulation
including Registration
k) POWER GENERATOR: 2 nos. 125 KVA power generators, powered by Kirlosker/
Cummins or  equivalent make diesel engine with "STAMFORD/JYOTI" make alternator
and properly designed control panel for rig
operation and illumination of work area with each other.
l) Sufficient number of suitable flanges, chicksens/ flexible joints and rubber hoses for
making all types of connections for working pressure 5000 psi  will be available,
m) Welding machine/ Welding transformer powered by contractor's Gen Set along with
all associated welding and oxy - acetylene cutting accessories, gases and consumables
etc.
n) Potable water storage, filter and water cooler,
o) One no of red aviation light flickering type fitted with lamp at crown block shall
be available having independent circuit.
p) Mud balance
q) All rig equipments and facilities like bunkhouse store etc. will have effective double
distinct earthing system as per IER 1956.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

Land Drilling Rigs

----------------------------------------------------------------------------------------------------
Search words (for official use only) :
550hp Workover Rig For Sale in India
Used Workover Land Rig
550 HP Workover Rig For Sale in the Middle East
2008 built Workover Rig for sale in India
Used Workover Land Rig 550 HP For Sale
Land Workover Rig For sale - 2008 built
Workover Rig - 550hp - 2008 built
Used Workover Rig for Sale in the Middle East

----------------------------------------------------------------------------------------------------

Ingersoll-Rand T3 Drill Rig for Sale
Worldoils Marketplace
Ingersoll-Rand T3 Drill Rig for Sale

Worldrigs ID: WR1013

Ingersoll-Rand T3 (Truckn 3) Drill Rig for Sale
Used 
Drill Rig 1975 Built for Sale

Model : T3 (Truckn 3)
Manufacturer : Ingersoll-Rand
Year : 1975
Condition : Used

Description :

1975 Ingersoll-Rand T3 drill rig (Truckn 3)
IR 750 cfm / 250 psi Air Compressor
Cummins 903 Diesel Engine
10 GPM water injection pump
Air winch
Hour meter shows 5,422 on gauge
Mounted on a Truck
Powered by Gas Engine
Location : USA

Price & terms : Please enquire using the email form below.    

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

Water Well Rigs          Water Well Rigs

---------------------------------------------------------------------------------------------------------
Search words(for official use only) :
Ingersoll-Rand T3 Drill Rig for Sale
Used drilling Rig 1975 built for Sale in USA
Land Drilling Rig Ingersoll-Rand T3 for Sale
1975 Built Used Ingersoll-Rand T3 Drill Rig
----------------------------------------------------------------------------------------------------------

 
Used Ingersoll-Rand DM45E Drilling Rig
Worldoils Marketplace
Used Ingersoll-Rand DM45E Drilling Rig

Worldrigs ID: WR1035

Ingersoll-Rand DM45E Drilling Rig for sale
Used 1994 Built Ingersoll-Rand DM45E Drilling Rig 

Model : DM45E
Manufacturer : Ingersoll-Rand
Year : 1994
Condition : Used

Description :

1994 Ingersoll-Rand DM45E drill rig
(Almost Completely Rebuilt through 2011)
CAT Diesel Engine
IR 900 cfm / 350 psi Air Compressor
Dry Dust Collector
Carousel handles (30' x 5-1/2") Drill Pipes
Heavy Duty Undercarriage
Location : USA

Price & terms : Please enquire using the email form below
 
If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

Water Well Rigs          Water Well Rigs

-----------------------------------------------------------------------------------------------
Search Words(for official use only) :
Ingersoll-Rand DM45E Drilling Rig for Sale
1994 Built Drilling Rig
Used Drilling Rig for Sale in USA
Used Drilling Rig 1994 Built for Sale
Land drilling Ingersoll-Rand DM45E for Sale

-----------------------------------------------------------------------------------------------

 
Speedstar 30K Drilling Rig - 1985 Built
Worldoils Marketplace
Speedstar 30K Drilling Rig - 1985 Built

Worldrigs ID: WR762

Speedstar 30K Drilling Rig for Sale
Used Drilling Rig for sale
1985 Speedstar 30K - Drilling Rig for sale

Model : 30K
Manufacturer : Speedstar
Year : 1985
Condition : used

Description :

1985 Speedstar 30K drill rig
Sullair 840 CFM / 350 PSI Air Compressor
Sand Reel, Rod Rack, Carousel
Bean 18 GPM Water Injection Pump
Hammer Lubricator
Rig has 8,084 frame hours
Mounted on a 1985 Loadcraft 6x4 truck
Cummins 475 Twin Turbo (Rebuilt in 1999) & PTO (Power Drill & Truck)
Roadranger Transmission (Rebuilt in 2008)
Newer Rear Tires
New Paint done back in August 2009
400 ft. of used Drill Pipe (20' x 4-1/2" OD) Included
6” DTH Hammer (360) Included
Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

Water Well Rigs          Water Well Rigs

---------------------------------------------------------------------------------------------------------
Search words(for official use only) :
Speedstar 30K Drilling Rig for Sale
Drilling Rig 1985 Speedstar 30K - For Sale
1985 built Drilling Rig for sale
Used Drilling Rig - 1985 built Speedstar 30K
Land Drilling Rig For Sale in USA
-------------------------------------------------------------------------------------

Atlas Copco T4W Drilling Rig 2005 Built for Sale
Worldoils Marketplace
Atlas Copco T4W Drilling Rig 2005 Built for Sale

Worldrigs ID: WR311

Used Drilling Rig Atlas Copco T4W - 2005 Built
Atlas Copco T4W Drilling Rig For Sale


Model :
T4W
Manufacturer : Atlas Copco
Year : 2005
Condition : Used

Description
2005 Atlas Copco T4W drill rig
3,785 Hours as of August 2011
IR HR2.5 1250 cfm / 350 psi air compressor
Cummins QSK19C Diesel Deck Engine at 755 HP
50,000 lbs of Pullback
25 GPM CAT 2520 Bean Water Injection Pump

Hammer Lubricator
3 Carousels - (2) 4 Rod & (1) 7 Rod
Worm Gear Head
2 Speed Fan
375' ft of used Drill Pipe (25' x 4 1/2" x 3 1/2") and basic hand tooling included
6" & 8" used Hammers & Bits included
Lincoln Welder on board
Paint in Very Good Condition

Mounted on a CCC (Crane Carrier Company) truck
CAT C13 Diesel engine @ 380 HP
16,880 Low Miles on gauge as of August 2011
Tires (Very Good Condition)

Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

Water Well Rigs          Water Well Rigs
-------------------------------------------------------------------------------------------------
Search words(for official use only) :
Used Atlas Copco T4W Drilling Rig 2005 Built
Used Land Drilling Rig For Sale
Drilling Rig 2005 built for sale
Drilling Rig for sale in USA
Atlas Copco T4W Drilling Rig For Sale

-------------------------------------------------------------------------------------------------

 
Ingersoll-Rand DM25 Used Drilling Rig 1985 Built - For Sale
Worldoils Marketplace
Ingersoll-Rand DM25 Used Drilling Rig 1985 Built - For Sale

Worldrigs ID: WR850

Ingersoll-Rand DM25 Used Drilling Rig  For Sale
Used Drilling Rig 1985 Built - for sale

Model : DM25
Manufacturer : Ingersoll-Rand
Year : 1985
Condition : Used

Description : 

1985 Ingersoll-Rand DM25 track drill rig
Multi-Pass
IR 750 cfm / 350 psi air compressor
Cummins Diesel engine
Repacked cylinders on mast
Repacked three (3) leveling jacks
Repacked 3 pumps,
five (5) rod carousel
Dimensions : 36' L x 11' 10" W x 14' 6" H
Location : USA

Price & terms : Please enquire using the email form below.
       
 


If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

Water Well Rigs          Water Well Rigs

---------------------------------------------------------------------------------------------------------
Search words(for official use only) :
Ingersoll-Rand DM25 Drilling Rig for Sale 
Used Drilling Rig Ingersoll-Rand DM25 For Sale
1985 Built Drilling Rig for Sale in USA
Used Drilling Rig 1985 built Ingersoll-Rand DM25
Land Drilling Rig For Sale 1985 built
Used Ingersoll-Rand DM25 drilling rig for Sale
---------------------------------------------------------------------------------------------------------

 
Canterra CT550 Drilling Rig for Sale
Worldoils Marketplace
Canterra CT550 Drilling Rig for Sale

Worldrigs ID: WR1003

Canterra CT550 Drilling Rig for Sale
Used Drilling Rig 1988 Built 

Model : CT550
Manufacturer : Canterra
Year : 1988
Condition : Used

Description :

1988 Canterra CT550 drill rig
5x6 mud pump
18 GPM Water Injection
CAT head
Mounted on a 1989 Ford L9000 Truck
CAT 3406
10 Speed Transmission
Location : USA

Price & terms : Please enquire using the email form below.  

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

Water Well Rigs

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Canterra CT550  Drilling Rig For Sale
Used Drilling Rig 1988 Built
Canterra CT550 Drill Rig 1988 Built for Sale
Land Drilling Rig For Sale Canterra CT550
---------------------------------------------------------------------------------------------------------

Cardwell KB200C Workover Rig for Sale or Charter
Worldoils Marketplace
Cardwell KB200C Workover Rig for Sale or Charter

Worldrigs ID: WR1000

Cardwell KB200C Workover Rig for Sale or Charter
Workover Rig for Charter - Cardwell KB200C
81 Ton Workover Rig for Charter
Workover Rig for Sale - Cardwell KB200C

Service Conditions :
The rig is capable for undertaking work over operations in Oil / Gas / Injection / Effluent
disposal wells /CBM wells
etc. up to depth of 3800 mts approximately with tubing string
of 2-7/8". The work over jobs include but are not
limited to servicing/ installation of
artificial lift equipment, cleaning of well bore, gravel packing, sand screening,
stimulation,
well abandonment, transfer of horizons, water shut off, gas shut off, water injection profile
modification
and re-completion, retrieval of gravel pack assembly, fishing & releasing of
stuck up, multi-layer resting, casing
repair etc. in vertical / deviated / horizontal / multilateral
/ ERD / USRD wells, etc.

1. Workover Rig
Cardwell, USA make, model KB-200C, self propelled, Back-in-type, mobile workover cum
drilling rig
accommodated on heavy duty carrier having hook load capacity of 81 T. The rig
is equipped with the following
technical features :

* Wind load resistance of the Mast is 60 MPH with full set back, having external Guying lines
with mast.

a) Mast :
4 leg leaning type, Hydraulically telescoping, two section, foldable, Cardwell make,
Model 96-180, Mast with clear
height of 96 ft. from ground level and rated static hook load
capacity 81 T with 6 lines strung on traveling block. The
Mast is equipped with suitable Finger
Board which can accommodate range-II, 2 7/8"/3 ½” tubulars in doubles.

The Mast shall conform to the following :
* The Mast is having unobstructed line of vision to the crown block.
* The Mast is completed with Stand Pipe
* Racking Board is of adjustable type and completed with top man emergency escape  device
from monkey board
to ground, railings & safety belts. The Racking Board is having sufficient
provision to rack 2 7/8" tubulars.

b) Suitable locking system shall be provided with additional safety manual lock. This is required
after telescoping of
mast to full height.
c) The mast is designed to withstand wind speed of minimum 60 MPH with full pipe/ setback
with all guy ropes
properly placed as per standard API pattern.

d) Hydraulic Cat works for make up & breakout consisting of hydraulic make up (spinning)
cylinder providing
10000lbs (4444kg) minimum line pull and hydraulic break out cylinder to
develop a minimum line pull of 20000lbs.
Control for make up & breakout should be located
at Driller's console.

g) Draw works is of 300 HP rating with minimum 4 forward and 1 reverse speed.
Cardwell make, KB 200C model, single drum draw works of 300 HP capacity.

i) Draw works is having main drum, Lebus Grooved.

h) Carrier Engine
The draw works is powered by 1 no. of "DETROIT DIESEL" make, model 8V-92T diesel
engine of 450 HP /
Caterpillar 3406 B at 2100 rpm with ALLISION make, heavy duty
transmission consists of torque converter, model
"CLBT 4860"/ “ 750” or “754” and suitable
power trend  through compound/chain drive and gear boxes.

i) We will provide the Hook and tackle system for the rig and capable to operate 2-7/8" to
3- 1/2" tubing and 2-7/8"
to 3-1/2" drill pipes up to the required depth.

2) Substructure
Simplex make, sub-structure having a overall height of 15 ft, clear height of 12', rated
simultaneous set back
capacity of 125 T. The sub-structure is suitable to accommodate
17.5" Rotary Table and completed with tong back
up post for rig tongs, railing, stairway and
wings etc. The sub-structure is having sufficient working area and space
for racking the rated
length of tubulars.
The structure has the sufficient clear height below rotary beam to
accommodate 3 stack BOP (one Pipe Ram +
One Blind Ram + one Annular) riser nipple in
work over mode.

3) Rotary Equipment
IDECO make, Model "LR-175" or equivalent rotary table with 17.5" opening with static load
capacity not less than
181 tons. The table is completed with master bushing and drive
bushing. The rotary table is driven by chain-
sprocket and the mechanism is powered by the
draw works with provision for reverse rotation for back off.

4) Kelly
"OMSCO" Make or equivalent, 3" face square/hexagonal kelly of 40' length having 6 5/8"
API Regular Box
connection on top bottom connection 2 7/8” IF PIN. The working pressure
rating 5000 PSI. The kelly is completed
with kelly saver sub and kelly cock (upper & lower).

5) Swivel
(a) IDECO make, Model "TL-120", rotary swivel having static/dead load capacity not less
than 75  tons and rotating
capacity not less than 50 tons, completed with bail bumper
support, goose neck connection to rotary hose etc.
Swivel bottom pin connection 6 5/8"
API regular left hand.

(b) With 3” diameter quick change goose neck assembly with working pressure 5000 psi.

6) Hydraulic Winch
IR/BRADEN make, Indian make or china make, hydraulic/air winch with suitable hand
braking system with hoses,
wireline etc.. Pulling capacity is not less than- 5 Metric ton.

7) Mud System
Mud system would be able to handle drilling mud Sp. Gr. upto approximately 1.8.

7.1 Mud Pump :
a) Gardner Denver Make, model "PZ-8” of 750 HP triplex slush pump, unitized to a
CATERPILLAR make, model
3412C diesel engine having 750 HP or Bomco make
F-500 Model of 500 HP unitised with Cummins make, KTA-
1150 of 550 HP  with heavy
duty gear box/Chain driven and air clutch. Mounted on a steel oil field skid, 20 gallon,
5000 PSI pulsation dampener, heavy duty Type-F 6000 psi mud gauge, Shear type
Re-set relief valve, Bleed off
valve and all related piping and valves rated at 5000
PSI working pressure.

7.2 Discharge System :
a) Rotary hose  having working pressure of 350 kg/cm2 (5000 psi) with suitable
connections.
b) Suitable end connection for suction and discharge manifold will be provided.
c) The standpipe is mounted on Mast, equipped with pressure gauge will be mounted
in the rig.

7.3 Mud/ Workover Fluid Storage/ Handling Arrangement :
i) Tanks, having total pumpable capacity (Volume) not less than 80 cubic meter with
permanent markings from
bottom.
ii) Arrangement for brine / mud preparation, mud mixing, mud agitators will be provided. 
iii) Necessary system lines.
iv) 1 no. Hopper of suitable size with butterfly valve and proper line connection will be
provided with gunning
arrangement.

8. Fuel Storage (optional)
Sufficient fuel storage to undertake the workover operations without interruptions will
be provided.

9. Well Control Equipment
The following well control equipment shall be required :
1 (One) no. "Hydril"/“Cameron”/“Shaffer (Shaffer make of NOV)” Make, double ram,
hydraulically operated, 7 1/16"
x 5000 PSI WP Blow Out Preventor  having one set of
blind ram and set of pipe rams to handle the size 2 3/8”, 2
7/8” and 3 ½” . BOP is having
the provision to close manually.

Control Unit :
One BOP Control unit as per API 16D and of reputed make, 3000 psi working pressure,
hydraulically operated with
sufficient fluid capacity. Units are having 2 charging system
i.e. pneumatic and electric with auto start and stop
facility. Flameproof DGMS approved
motor will be provided.

BOP test plugs or Cup tester/ accessories shall be provided.

Choke & Kill Manifold :
Choke and kill manifold of size minimum 2 1/16” having minimum 5000 psi WP along
with sufficient quantity of
flexible steel piping of minimum 5000 psi WP of suitable size
fitted with NRV in kill lines. It will be suitable
combination of valves having provision to
flow the well through fixed choke, variable choke, and one bypass also.
The provision
will also be available to kill the well through kill line as well as one additional line for
making
connection through cementing.

10. Handling tool as per API 8C
a) Center latch elevator for minimum 100MT capacity as per below.

Size / Description
2-7/8” : Upset Tubing
2-7/8” : Plain Tubing
2-7/8” : I.F Drill Pipe
3-1/2” : Upset Tubing
3-1/2” : Plain Tubing
3-1/2” : I.F Drill Pipe

b) Elevator Links :
2 Nos. (One pair/set) forged elevator links, and the size will be as per the standard design of
the rig, rated capacity
of minimum 100 MT, size 1 ¾” x 72”.

c) Power (pneumatic) Slips :
A suitable pneumatic slip complete with sufficient nos. of die inserts for 2 3/8” to 3 ½”
tubulars. The power slip is
equipped with all necessary connection, hoses and coupling
etc. the slip is having control lever on driller’s console.

d) Hydraulic Tubing Tong :
 1 no of light weight hydraulic tubing tings as per relevant API for 2 3/8” to 3 ½” tubing’s
with replaceable jaws
minimum torque rating 8000 ft lbs along with sufficient spares
will be provided.

e) Heavy Duty Tong (Qty - 02) :
A suitable Heavy Duty Tong, Range 2-3/8" to 4-1/2", and to handle all fishing tools and
milling tools as per relevant
API, torque rating minimum 35000 ft-lbs with hanger
arrangement along with sufficient spares would be provided.

11. Cross Over Subs :
Bit subs, cross over subs and all necessary subs to handle work with 2-7/8" &
3-1/2" tubing and  drill pipe string or
their combinations would be provided by us.

12. Rig instrumentation suitable for Hazardous area
I. Deadline weight indicator with sensator /load cell on driller console /control panel,
indicating load on hook for
designed capacity of the rig will be provided.
II. A suitable (0 – 6000 psi) mud pump pressure gauge mounted on stand pipe
will be provided.

13. Drill String (Optional)
A) Drill Pipes 2-7/8” OD IF, Grade G of 10.4 ppf, premium class-I, Range–II, 3500
meters right hand.
B) Drill Collars : 3 1/2” /  4 3/4”. 5 Nos.

Other Equipments
i) V door & cat walk with pipe racks on both sides.
ii) Cellar pump- Air operated (Pneumatic) with suction hose of sufficient length
will be provided by the contractor
with additional diaphragm.
iii) Circulating head 5000 psi working pressure for 3-1/2" and 2-7/8" Drill pipes
and tubings with necessary change
over will be provided.
iv) 2 nos. of 75 KVA capacity for continuous round the clock operation including
motors of auxiliary equipments,
other electrical equipments like A/C, fan, blower
etc. and illumination of working area etc.
v) Welding machine/ Welding transformer powered by contractor's Gen Set along
with all associated welding and
oxy - acetylene cutting accessories, gases and
consumables etc.
vi) One no of red aviation light flickering type fitted with lamp at crown block will
be available having independent
circuit.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

Land Rigs

----------------------------------------------------------------------------------------------------
Search words(for official use only) :
Cardwell KB200C Workover Rig for Sale or Charter
Workover Rig for Charter - Cardwell KB200C
81 Ton Workover Rig for Charter or Sale
Workover Rig for Sale - Cardwell KB200C
Cardwell KB200C Workover Rig for Sale in India
Workover Rig for Sale - 81 Ton - Cardwell KB200C
81 Ton Cardwell KB200C Workover Rig
Land Rig for Sale or Charter
Cardwell KB200C Workover Rig for Charter in India
81 Ton Workover Rig for Sale - Cardwell KB200C
----------------------------------------------------------------------------------------------------

 
1990 Ingersoll-Rand T3W - Long Tower - Used Drilling Rig
Worldoils Marketplace
1990 Ingersoll-Rand T3W - Long Tower - Used Drilling Rig

Worldrigs ID: WR834

Ingersoll-Rand T3W Drilling Rig for Sale
Used Drilling Rig for sale
1990 built Ingersoll-Rand T3W Drilling Rig for Sale


Model : T3W - Long Tower
Manufacturer : Ingersoll-Rand
Year : 1990
Condition : Used

Description :
1990 Ingersoll-Rand T3W drill rig
IR 900 cfm / 350 psi air compressor (Rebuilt with 2,500+ hours since)
Cummins 855 Diesel Deck Engine at 450 hp (Rebuilt with 800+ hours since)
18 GPM bean water injection pump

pre-heat box (cold weather starter)
400' ft of Used Drill Pipe (20' x 4 1/2") and basic tooling included
36' ft Tower
24,000 lbs pulldown & 26,500 lbs pullback
Mounted on a International Paystar 5000 Truck
Cummins 350 HP
32,000 miles
Location : USA

Price & terms : Please enquire using the email form below.
   
 

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

Water Well Rigs          Water Well Rigs
---------------------------------------------------------------------------------------------------------------
Search words(for official use only) :
Ingersoll-Rand T3W Drilling Rig for Sale
1990 Built Drilling Rig For Sale
Used Ingersoll-Rand T3W - Long Tower Rig For Sale
Used Drilling Rig - 1990 Ingersoll-Rand T3W - Long Tower
Land Drilling Rig For Sale - 1990 Built

-------------------------------------------------------------------------------------------------------------------

 
Schramm T64HB - Drilling Rig for sale - 1978 Built
Worldoils Marketplace
Schramm T64HB - Drilling Rig for sale - 1978 Built

Worldrigs ID: WR812

Schramm T64HB Drilling Rig for sale
1978 built Drilling Rig for sale
Schramm T64HB - Drilling Rig for sale - 1978 Built
Used Drilling Rig for sale

Model : T64HB
Manufacturer : Schramm
Year : 1978
Condition : used

Description : 

1978 Schramm T64HB drill rig
Detroit 8V71 Diesel Deck Engine
425 cfm / 250 psi Air Compressor
Water Injection Pump
Hammer Lubricator
200' ft of Drill Pipe (20' x 4-1/2") and basic tooling included
6" & 8" Hammers & Bits included
Lincoln 225 G7 Welder & Generator on board
Super Rapid Head Travel (loading pipe)
Mounted on a GMC truck
6V53 Diesel Engine
13 Speed Transmission
Flotation Tires (Front), Newer Front Brakes, Newer Transmission
Location : USA

Price & terms : Please enquire using the email form below.
     

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

Water Well Rigs          Water Well Rigs

---------------------------------------------------------------------------------------------------------
Search words(for official use only) :
Schramm T64HB Drilling Rig for Sale
Drilling Rig - Schramm T64HB - For Sale
1978 built Drilling Rig for sale
Used Drilling Rig - 1978 built Schramm T64HB
Land Drilling Rig For Sale - 1978 built
Used Schramm T64HB drilling rig for Sale

-------------------------------------------------------------------------------------


1995 Schramm T450W Rig For Sale
Worldoils Marketplace
1995 Schramm T450W Rig For Sale

Worldrigs ID: WR345

SOLD

Schramm Drilling Rig T450W1995 Built - For Sale
Used Schramm T450W - For Sale

Model : T450W
Manufacturer : Schramm
Year : 1995
Condition : Used

Description : 
1995 Schramm T450W drill rig (Retrofitted in 2007)
Rebuilt - GHH 825 cfm / 350 psi Air Compressor (with clutch and Rebuilt with 500 hours since)
Rebuilt - Detroit Series 60 diesel deck engine with * ADM Electronic Module (Rebuilt in 2007)
30,000 lbs of pull back
Single Motor top head
6 Rod Breakout style carousel

Slide over head 10,000 lbs winch
Hydraulic Jib Boom
DTH Lubricator
Tool boxes & Junk box
Three outriggers

25 GPM CAT Water Injection pump
10 Rod rack
Walkways
Set up for (4½" and 3 ½" API Reg x 20’) Drill rods
Webbasto engine heater
60” Break out wrench piping for mud pump

Atlas R2000 Hydraulic casing hammer (installed in 2009)
Drives 6”, 8”, & 10” casing
Mast guides
Swing-Jib
Hydraulic lifting cylinder
Lifting cylinder control
Mounted on a 1995 Ford LTS8000 truck
10 Speed Eaton Transmission

Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

Water Well Rigs          Water Well Rigs

---------------------------------------------------------------------------------
Search words(for official use only) :
Drilling Rig Schramm T450W for sale
Used Schramm T450W - Built 1995 - For Sale
Schramm T450W For Sale in USA
Schramm T450W - Used Drilling Rig - 1995 Built
Used Schramm Rig For Sale

----------------------------------------------------------------------------------

 
Used Drilling Rig for Sale Ingersoll-Rand T3W
Worldoils Marketplace
Used Drilling Rig for Sale Ingersoll-Rand T3W

Worldrigs ID: WR1031

Ingersoll-Rand T3W Drilling Rig For Sale
Used Drilling Rig 1987 Built

Model : T3W Drill Rig
Manufacturer : Ingersoll-Rand
Year : 1987
Condition : Used

Description :

1987 Ingersoll-Rand T3W Drill Rig
Cummins 855 Diesel Engine
IR 825 CFM / 350 PSI Air Compressor (Rebuilt 300 Hours Since)
300' ft of used drill pipe (20' x 4-1/2") included
Hammer lubricator
26,500 lbs of pull back
Mounted on a Ford 8000 Truck
Diesel Engine
VIN# 1FDXR82A5HVA24572
8 Speed Transmission
Location : USA

Price & terms : Please enquire using the email form below
 
If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

Water Well Rigs           Water Well Rigs

-----------------------------------------------------------------------------------------------
Search Words (for official use only) :
Ingersoll-Rand T3W Drill Rig for Sale
Land Drilling Rig for Sale in USA
Used Drilling Rig for Sale in USA 1987 Built
Ingersoll-Rand T3W Drilling Rig for Sale
Used drilling Rig 1987 Built
-----------------------------------------------------------------------------------------------
 
Land Drilling Rig
Worldoils Marketplace
Land Drilling Rig

Worldrigs ID: WR269

Land Workover Rigs
Land Drilling Rigs
Land Oil Drilling Rigs


For more details on the Used land Rigs for sale, please visit :

Land Drilling Rigs


 Gardner Denver 2000 hp SCR +/- 25,000' Land Rig

 OIME 2000E 2000 hp +/- 25,000' SCR Land Rig

 Gardner Denver 500 +/- 10,000' Rig (600 hp)

 Spencer Harris 7000 10,000’ Mechanical rig (8000')

 Spencer Harris 7000 10,000’ Mechanical rig

 BDW 800 12,000 feet Mechanical Drilling Rig

 BDW 800 12,000 feet Mechanical Drilling Rig

 National 110-M 1500 hp Mechanical Drilling Rig

 Cabot 750 +/- 10,000' Trailer Mounted Mechanical Rig

 Crown Duke CE 750 11,500' Trailer Mounted Mechanical Rig

 National 80UE 1000hp SCR rig

 Gardner Denver 1000 hp SCR Drilling Rig

ZJ70 AC Drive +/- 20,000' Drilling Rig

Ingersoll Rand RD20 Long Tower Drilling rig

Wilson Mogul 42 Double Drilling Rig

BOMCO 2000 HP Drilling Rig (60HZ) - ZJ70DB

National 110UE

1000HP Mechanical Skid Mounted Drilling Rig

National 1320 2000hp SCR Drilling Rig

Wilson 65 9000ft Mechanical Drilling Rig

Gardner Denver 500 11000ft Rig

Continental Emsco GB 350T Drilling Rig

RT - 400B 12,000 feet Drilling Rig 

National 370 +/- 10,000' Drilling Rig (800 hp)

EMSCO GB 500 +/- 12,000' Drilling Rig (1200hp)

Brewster N45 +/- 8,500' Drilling Rig (900hp)

TSM 850 +/- 12,000' Mechanical Drilling Rig (850 hp)

Wilson 75 +/- 11,000' Drilling Rig (1000 hp)

Ideco U-15 Mechanical Drilling Rig

Superior 700 +/- 10,000’ Drilling Rig (800 hp)

Shramm T130XD Drilling Rig

 Gardner Denver S1000 Mechanical Drilling Rig (1000hp)

OIME 3000 HP SCR +/- 30,000' Drilling Rig  

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

Land Rigs

-----------------------------------------------------------------------------------
Search Words (for official use only) :
Land Oil Drilling Rigs For Sale
Land Oil Drilling Rigs
Land Gas Drilling Rigs
Land Drilling Rigs For Sale
Land Gas Drilling Rigs For Sale
Land Drilling Rigs
-------------------------------------------------------------------------------------

 
800hp Mechanical Land Drilling Rig
Worldoils Marketplace
800hp Mechanical Land Drilling Rig

Worldrigs ID: WR244

Ideco Mechanical Drilling Rig for Sale
Gas & Oil Drilling Rig
Ideco U-15 - 800 HP Used Mechanical Drilling Rig
Used Oil 800hp Drilling Rig


Rig Carrier
Drawworks
800 HP U-15 single drum, Make up & Breakout heads hydromatic brake
 
Hydraulic Winch
5,000 lbs capacity Air operated
 
Drawworks Power
(2) Cat 3406 engines, 599 HP, 2 twin disk torque converters
 
Mast
107’ not certified on lbs, 8 lines. Is adequate height to allow mouse hole connection
 
Substructure for BOPE Class – III
100,000 lbs, not yet certified, Capable of handling 8’ tall BOP, Complete with V door, catwalk and handrails. Not adjustable rotary table, No T structure. Substructure design must be able to accommodate opening of pipe ram doors whenever ram size change-out is required.
 
Rotating Equipment
Rotary Table
Cooper 17 ½” diameter opening, 100 ton dead load capacity, Complete with torque guage. Mechanicl driver system with diameter bushing for 7” to 13 5/8” tubular. Rotary table with lock to prevent clockwise and counter clockwise rotation.
 
Rotary Hose
Minimum 3” ID with 55’ length, with minimum 3000 psi WP complete with union connection with safet6y chain
 
Rotary Swivel
L200 Emsco, 150 ton capacity
 
Kelly
4 ½” square type with bushing saver-sup, 40’ min working space and maximum height must be matched with mast specification and accessory equipment and able to take mouse hole connection.
 
Sluch Pump
(1) 18” C350 National , matco fluid – end ID #C350-002, powered by 3412 caterpillar
(1) 16” N1100 Duplex, Matco Fluid-end Serial # X1177, powered by 379 caterpillar serial # 76B270
 
Sluch Pump Prime Mover
(1) 18” C350 National, Matco Fluid-end, ID#C350-002, powered by 3412 Caterpillar
(1) 16” N1100 Duplex, Matco Fluid end Serial # X1177, powered by 379 Caterpillar serial # 76B270
 
Shale Shaker with Jet Sprayer 
(1)   4 x 4 vibrating shake (electric)
 
Hoisting Equipment
Drilling Line
New 1” line size, 6 x 19 IPS, FC – 5000 ft. and match to the drawwork and crown block. C/W drilling line spool and tone mile record
 
Hydraulic winch line
With minimum 5/8” line size, 200 feet length and 5 ton capacity
 
Traveling Block with Hook
6 sheaves 1” drilling line completed with standard and extra long links and match to drum and mast, with minimum 150 tons capacity
 
Elevator Link
(2)   3” x 8’ with 150 ton capacity
 
Elevator (tubing, DP, and DC)
4” rebuilt and certified #w04166701LT10-1008, 150 ton capacity
 
Weight Indicator
Totco, capacity measurement 0-360,000 lbs having weight and vernier pointer, match with rig capacity. Recalibrated as required by Red Satelite
 
Depthometer
Eastman ¼” line measuring 300 ft
 
Tubular Good and Equipment
Manual Rotary Tong
BJ type C each of make-up and breakout manual rotary tongs for 3 ½” to 10 ¼” tubular size with 35,000 ft lbs of torque. Must be complete with tong line (torque) pull gauges installed on each the make-up and breakout snub lines. Total 1 toneg line pull gauges.
  
Chain Tong
One 30” to handle 2 3/8 – 6”, and One 36” to handle 2 3/8 – 12”
 
Rotary Slip
One set of 4” slips and one set of 6” drill collar slips
 
Safety Clamp
One 6” drill collars
 
Pipe Rack
Three – 3-leg conventional pipe rack complete with stopper on each and for 50 joints DP and tubing, and for 15 joints of + 5/8” liner with wooden base
 
Subs
One 4 ½” xh – 4” fh
One 4 ½” xh – 6 ¾ regular
One 4” fh – 4 ½” xh
One 4 ½” regular – 4” fh
One 4 ½” xh – 4” fh
 
BOPE
Ram BOPE
One 8” Regan type bladder BOP
 
Closing Unit
One Accumulator system with 3000 psi WP, complete with air compressor with automatic start
 
Electrical Equipement
Electric Power
Generator house with 2300 kw generators and emergency electric air compressor
 
Lighting
One set explosion proof lighting set with sufficient lighting for rig site, ground fault interrupter with power head cable 220-480 V.
 
Miscellaneous
Doghouses (top and bottom)
One Top doghouse ID# 104, 40’ x 8’ x 7 ½’
One Bottom doghouse ID # 122, 29’ x 8’ x 7 ½’
 
Water tank
One 32’ x 8’ x 8’
 
Diesel Tank
One 10,000 Gallon
 
Drill pipe
7000 ft of 4” full hole
Drill Collars
Sixteen 6 ½ OD
 
Hutson Fork Lift
One Skytrac Caterpillar

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


Land Drilling Rigs


------------------------------------------------------------------------------------------------
Search words (for official use only) :
Oil & Gas Drilling Rig for Sale
Ideco Land Drilling Rig For Sale
Used Ideco U15 Land Rigs For Sale
Used 800hp Drilling Land Rig
800HP Land Drilling Rig
Used 800 HP Mechanical Drilling Rig for Sale
Mechanical Land Drilling Rig For Sale

-------------------------------------------------------------------------------------------------
 
Continental Emsco G.C. 500
Worldoils Marketplace
Continental Emsco G.C. 500

Worldrigs ID: WR753

Continental Emsco G.C. 500 for Sale
1000hp Mechanical Land Rig - Used - For Sale
American 1000HP used Land Rig


Drawworks Continental l Emsco :

G.C 500, with double 22’ Parmac Brake with 2
engine compound, with 320 Quincy Air Compressor. Drawworks powered by two C-15
Cat Engines with Twin Disc Torque converters, 2 Hydraulic Cat Heads, 2 Hydraulic
Handling Winches.

Derrick : Lee C Moore 131, 380,000# SHL

Sub Base : 45’L X 14’H X 24’W Lee C. Moore, 500,000 setback

Block : McKissick 4-sheave 1 1/8” groove, Shorty combo Hook

Kelly : 5” X 42’ Hex with Bash Ross Roller Bushing

Rotary Table : Emsco

Mud Pump : (1) F-1000 Triplex with 5 X 6 Mission Charge Pump Powered by Cat 3412
E with Allison 8000 Series 6 Speed Automatic Transmission.

Mud Pump : (2) F-1000 Triplex with 5 X 6 Mission charge Pump, bowered by 398 Cat.

Water Tank : 10’W X 40’L X 8’H 600 BBL

Generator House : 10’W X 40’ X 8’H with 2-400KW Generators powered by C-15
Cat’s, 1- Electric Powered Auxiliary Air compressor

Parts Room : 8’ X 10’

B.O.P. Equipment : 5 Station Closing Unit, 5000 PSI Pipe and Blind Ram’s, 3000 PSI
Annular B.O.P., 5000PSI Choke Manifold.

Pit System : 38’L X 11’6”W X 6’H Suction Pit 470 BBLS. (1) 30’L X 11’6”W X 7’6”H
Shale Pit 470 BBLS Total Pit System 940 BBL with 2-5 X 6 Mission, Electric Powered
Centrifugals. (3) Electric Pit Agitators. (2) Linear Shale Shakers (2) Cone De-Sanders (2)
Mud Hoppers (4) Hydraulic Mud Agitators (1) Degasser 3’ X 12’

Top Doghouse : 8’WX 30”L X 7’6”H, (4) Pen Drilling Recorder, Wild Cat Auto Driller

Fuel Tank : 10,000 Gal Skidded

Change House : 10’ X 15’

Drill Pipe : 10,000 feet double white band 4 1/2 X- Hole

Drill Collars : (14) 6” X 61/4” All Handling Tools for D.P to D.C.

Tool Pusher House : 14’ X 55’

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

Land Rigs

---------------------------------------------------------------------------------------------------------
Search words(for official use only) -
Continental Emsco GC 500 for Sale
American 1000HP used Land Rig
American Used Land Rigs for sale - 1000HP
Continental Emsco Used Land Rig - 1000HP
US built Used 1000HP Drilling Rig

10000feet Land Rig - Used - For Sale
1000hp Used Land Rig Fro sale - Mechanical

Continental Used 10,500feet Drilling Rig For sale in USA
-------------------------------------------------------------------------------------------------------

 

American 1500 HP Land Rig For Sale
Worldoils Marketplace
American 1500 HP Land Rig For Sale

Worldrigs ID: WR749

Mechanical Land Rig For Sale
American Used 1500hp Land Rig
1500HP Land Rig for Sale in USA
Mesa Model 1500 Mechanical Drilling Rig 

Drawworks :
Mesa, Model 1500 Hp, M, Split Level with Catworks, Brake Parkersburg, Model RC60 Hydromatic with Overriding Type “A” National Clutch with Gardner Denver Inline Compound for 3 Engines And with 1) Air Compressor Complete Package, Rebuilt By Spartan Equipment, June 2006

(3) Power Units :
Caterpillar Model C-18, Diesel Engines, 630hp Ea Complete, And with radiators, approx 1200 Hrs On Each Engine Since New, Skid Mounted.

(3) Torque Converters :
Oilworks, Model 195-100, Odessa, Used Approx 1200 Hrs Since New

Mast :
Lee C Moore, 142’, 1,385,000 Lbs, SHL Capacity, Angle Leg with Crown Block 1-3/8” 6 Sheave And with (1) Fastline Sheave, with Derrick Boom, Racking Finger Board

Substructure :
Elevating Type, 22’ High, 1,000,000 SHL Capacity, 750,000 Set Back, with National Deadline Anchor And Sensator, Type “E-B” with Derrick Raising Becket And Derrick Stand

Mud Pumps :
Two (2) Lewco, 1300 Hp Complete with Matco Pulsation Dampener with Charging 5” X 6” Centrifugal Pump, Matco 8000 Psi Guages, 5000# Psi Fluid Ends, with Pump Skidded, Powered By Caterpillar D399 Diesel Engine. (1) Engine Has 1360 Hrs And 1) Has 1148 Hrs Since Overhaul, Each with Radiators, Master Skidded.  (Note: Pumps Were New 2006 And Has Same Hours As Power Units Above.)

Mud System :
Complete 1650 Bbl Mud System with (3) 550 Bbl Mud Tanks, with 15 Hp Mud Agitators And Mud Guns, 3) Shale Shakers, Derrick, 3 Stage, Desilter - 16 Cone, 3 Cone Derrick Desander Each P/B 5x6 Centrifugal Pump And GE 75 Hp Electric Motor with (3) 6”X8” Centrifugal Mud Mixing Pumps, Each P/B Ge 100hp Electric Motors, with Swaco Degasser, (1) 50 Bbl Slugging Tank, All Tanks Are Ultra Sound Inspected And Are Capable Of Handling Mud Weight Up To 25 Lbs Per Barrel – All Rebuilt And Finished Before May 6, 2006.

BOP :
(1) Shaffer 13-5/8” 5000 Psi, Spherical, with 5000 Psi Std Top And 10,000 Psi Flanged Bottom (1) Shaffer Sl, Double, Ram Type Flanges Top And Bottom, with (4) Flanged Outlets, with Blind And Pipe Rams (1) Shaffer Sl, Single Ram Type, Flanged Top And Bottom, 10,000# Psi with Pipe Rams. Bop’s Were Completely Refurbished By Church Energy, May 2006

Traveling Block :
National, 500 Ton, with Clevis, 6 Sheaves X 1-3/8”

Hook :
Joy, Hydra Hook with Clevis, 500 Ton

Rotary Table :
Ideco, 27-1/2” with Varco Pin Drive, Master Bushing, with Drive Sprocket

Swivel :
National, Model N-1324, 500 Ton

Kelly Drive Bushing :
5-1/4” Hex, Pin Drive

Kelly Spinner :
International With 2) Motors Forward And Reverses

Accumulator :
Koomey, Model 80, 18 Bottles, 20 Gal, with (6) Stations, with Triplex Electric Powered Pump And with (2) Air Pumps, Master Skidded, with Koomey 80 Remote Control Unit And with 100’ High Pressure 1” Lines

Choke Manifold :
New 2006, By Church Energy, 4” X 10,000 Psi with 4) 3” Valves, 1) Manual Choke, 1) Hydraulic Choke Church with Control Panel, Total Values (8) with Master Skid

Generator House :
9’w X 35’ Long X 8-1/2’ H, Crimped Metal, with 2) Cat 3412 Ta Diesel Engines, Each Powering 550 Kw Sr4 Generators, with Distribution Elect Panel, Transformers And with 2) Screw Type Air Compressors

Top Dog House :
8’w X 20’l X 10’h with Knowledge Box, Lockers, Bench Storage

Drilling Spool :
13-5/8” X 10m, with 2) 4” Flg Outlets, with Cross Valves, 10,000# Psi, 1) Hydraulic 4”, 1) Manual 4”, 2) 2” Manual And 1) Bell Valve

Auxiliary equipment :

Fresh Water Tank, 600 Barrel

2) Rotary Hoses, 3”, 1) New, Still In Box

Set Cat Walks And Pipe Racks for Rig

Complete Set Suite Cases And Walkways for Rig

Complete Set Rig Lighting And Lighting Controls

Complete Set Of Hand Tools To Operate Rig

Approx 7000’ Of Drilling Line, 1-3/8” w/ Electric Spool Rack And Metal Spool, Mtd On Master Skid

4) Air Hoist, Ingersol Rand, 8 To 12 Tons Each

Set Of Tongs, Bj Type “B” with Jaws

Pipe Spinner, Spinner Hawk

Drill Pipe Elevators, Ww 350 Ton

2) Drill Pip Slips, Varco

2) Drill Collar Slips

Mud Bucket

Tool Basket, 8’w X 18’l X 3-1/2’h with Tool Box

Lot, Extra Mud Pump Parts

Set Of 2) Elevator Links 132”, 350 Ton, Complete Set Of Fire Extinguishers for Rig Requirements

One Complete Set Of Hard Wood Matting Boards for The Rig

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


Land Rigs

---------------------------------------------------------------------------------------------------------
Search words (for official use only) - 
Mechanical Land Rig for Sale
1500hp Used Land Rig For Sale
American 1500hp Used Land Rig For Sale
American Built Used Land Drilling Rig For Sale
Used 1500HP Mechanical Land Rig

1500hp Land Rig For Sale
Mesa 1500hp Mech Land Rig For Sale in USA
-------------------------------------------------------------------------------------------------------
 
Mechanical Trailer Rig for sale
Worldoils Marketplace
Mechanical Trailer Rig for sale

Worldrigs ID: WR676

Mechanical Trailer Mounted Drilling Rig for Sale
Land Drilling Rig for Sale - 1000 HP Mechanical Trailer
1000 HP Trailer drilling rig for sale
1000HP - Mechanical Trailer Package

The 1000 H.P. Trailer Rig Package is designed to meet the demands of our customers for today’s competitive market. We pride ourselves on doing the little things necessary that it takes to supply our customers with the latest innovative technology. When designing rig packages we try to meet three simple goals. All rig components must :
1. Operate Properly.
2. Rig up quickly.
3. Transport in the fewest loads possible.

Using these principles, we have designed this rig package to meet and exceed all of our customers needs.

I. Hoisting Equipment
i. Mobile drilling trailer mounted type 1000HP, with single drum drawworks, two Detroit series 60 14.0 liter engines with two Allison S6610H transmissions with hydraulic torque converter. Mast height 118 ft., load capacity-425,000 lbs. (210 ton API). Rig mounted   on a 4-axle chassis.

A. Group I. Basic Rig
a. Drawworks – OEM-1000
i. Disc Brake System – Two (2) 60” O.D. x 4” Thick water cooled disc: Four (4) brake calipers w/park feature, each caliper can develop 48,000 ft-lbs @ 100 psi. Maximum 900 rpm calipers have a park feature rated @ 28,000 ft-lbs each. Manufacturer = Kobelt
ii. Air Clutch – Two (2) 30” diameter friction disc, slip torque rating 54,500 ft-lbs @ 100 psi, maximum 760 rpm, 1664 sq in lining area. Manufacturer = Witchita.
iii. Drum 24” O.D. x 40” length with Lebus groove system
iv. Centralized Lubrication System
v. Drill line Diameter-1 1/8”
vi. Drive  Chain - Four-strand, 1 ½” pitch
vii.Total Disc Brake Area - 1680 sq. inches

b. Auxilary Brake
i. Air Operated : Water Cooled Disc with copper alloy wear plates, mounted to frame, coupled directly to drum shaft. Two (2) 36” Disc rated @75,000 ft-lbs @100 psi maximum 640 rpm.
ii. Size-236 or equal
iii. Maximum Pressure - 100 psi
iv. RPM-640
v. Direct Coupled Drum shaft.

c. Combined Gear Box
i. Combined right angle drawworks drive drop box with one output shaft for rotary drive and one output shaft (unused) for additional components.
     1. One input shaft with 1810 drive flange.
     2. Top right shaft - drawworks drive, air engaged 1.0 to 1 ratio keyed shaft
     3. Top lower shaft - rotary drive, air engaged 1.1489 to 1 reduction ratio keyed shaft.
     4. Bottom lower shaft – Future or additional components, opposite top lower shaft, air engaged, 0.9787 to 1 ratio (1.0217 to 1 ratio increasing), 1810 drive flange.
ii. Gear type lubrication pump mounted intermediate shaft provides positive lubrication to bearings.

d. OEM 118’-0” x 425,000# Telescoping Mast
The 118ft., mast provides is a telescoping design, manufactured in accordance with API and Drilling Structures Int’l Inc.’s strict quality control processes. The mast includes an automatically deployed racking board.
i. A telescoping derrick with open face derrick design, manufactured to API 4-F specifications. The open face design utilizes structural steel construction, which allows for maximum block clearance. Derrick includes a ladder from rig floor to crown and a block cradle with chain & hook for securing block during transport.
iii. Base Section :
a. A-leg style base section hinged to carrier frame.  (2) Turnbuckles attached from bottom of derrick base to carrier frame allow for mast angle adjustment.  The well-side derrick legs have manual screw jacks.

ii Specifications
Mast Height : 118’
No. of lines to Block : 8 or 10
API Operating Hook Load -
8-Lines : 340,000 lbs
10-Lines : 425,000 lbs

Drilling Line Size : 1-1/8 in.
Racking Board Height : 55ft., 58ft., 70ft.
Racking Board Capacity
5 in. Drill Pipe : 12,400 ft.

iii. Base Section :
a. A-leg style base section hinged to carrier frame.  (2) Turnbuckles attached from bottom
of derrick base to carrier frame allow for mast angle adjustment.  The well-side derrick
legs have manual screw jacks.

iv. Lower Section :
a. 6 in x 6 in x 3/4 in angle main legs, with 6 in x 4 in x 3/8 in rectangular tubing “back” braces.  Lower section of mast hinges to top of derrick base and rests on headache rack during transport.

v.  Upper Section :
a. Angle construction. 6 in x 6 in x ¾” upper legs, with  3 in x 3 in x 3/8 in “back” braces.  Upper section rests inside lower section until mast is raised. Upper section then telescopes hydraulically upward from lower section and locks in place with automatic latching pins.

vi. Crown Block :
a. Crown block is set up for a 8 or 10 line string-up.  Crown sheaves are grooved for 1-1/8 in.  Wire line. All sheaves are mounted on tapered roller bearings with grease certs for ease of maintenance.
b. Crown includes : (1) one 30 in fast line sheave, and (4) four 24 in crossover sheaves.

vii. Racking Board :
a. The mast includes an all welded racking board. The racking board automatically deploys as the mast is extended.

viii. Derrick Raising System :
a. The derrick is designed to utilize two, 72”x 9” x 3-stage, double acting raising rams and one 50’ x 7” single-stage telescoping cylinder. 

ix. Guylines :
a. Derrick includes (2) load guys from the crown to carrier and (1) set of wind guys that meet or exceed API specifications.

e. Hydraulic Catworks :
a. Hydraulic break out cylinder for breaking out pipe connections, 4 ft. stroke, maximum pull load 20,000 lbs. Installed on the mast. Includes cable, roller guides and hydraulic piping.
b. Hydraulic make up cylinder for making up pipe connections, 4 ft. stroke, maximum pull load 20,000 lbs. Installed on the mast. Includes cable, roller guides and hydraulic piping.
c. Controls are located at the operator’s console.

f. Traveling Block Limit Switch (Crown Block Saver)
a. Safety device for limiting traveling block raising. Installed at the main drum to activate the main brake when traveling block is up to a pre-determined  height.

g. Deadline Anchor
a. Dead line anchor to be used with compression type weight sensor. Drum type, mounted on carrier frame in front of drawworks frame.

h. Diesel Engine
a. Two Detroit series 60 - 14.0L engines rated at 600 BHP each@ 2100 RPM’s, 6 cylinders (inline) complete with DDC electronic control system.
b. Includes : Radiator, Heavy Duty Blower, 24V starter and alternator, variable speed governor, full instrumentation (ignition switch, ddr connector, electic throttle, electronic display module), two (2) 12v batteries and spark arrestor muffler.
c. Specifications : 600 BHP @ 2100 RPM, 1650 lbs/ft @ 1100 RPM

i. Transmission
a. 5 speed (6th gear locked out), automatic, Allison S6610H or equal w/torque converter, oil cooler. Dual air/hydraulic operation. Max. capacity 850 HP, 2500 RPM, 2300 ft-lbs input.

j. Compound Gear Box
a. Compound gear box, dual input, single output, may be drive with one or both engines.
b. Two input shafts, air engaged, 1810 drive flange (engagement of either input or a combination of both)
c. Single output, 1810 drive flange, ration 1.0271 to 1 to combination gear box.
d. Gear type lubrication pump. Mounted to output shaft  provides positive lubrication to bearing.

k. Power Take-off
a. Chelsea 852 XB or equal, Used for hydraulic pump drive, mounted on transmission, 95 HP @ 1000 rpm output.

l. Hydraulic System
a. Two hydraulic gear pumps, one 500 gallon hydraulic tanks with containment pan, filters, heat exchanger and sight glass. Capable of producing 50 gpm @ 3000 psi, pressure return and circulation filters with visual indicator, 3000 watts portable generator, inline flow meter, system safety release valve, circuit breaker panel for heater/valve bank, operator panel with selector switch.
b. Custom built valve bank, 15 station manifold, prewired control panel and hand held remote with the following functions :
i.   Mast lower/raise
ii.  Mast telescope up/down
iii. Two (2) hydraulic pilot operated directional valve and joystick for winches.
iv. Six (6) leveling jacks.
v.  D.S. sub raise/lower
vi. ODS sub raise/lower
vii. Make up/Brake out tong cylinders with remote torque adjustment
viii.Flow dividers for mast raise and sub cylinders
ix. Electrical control panel, remote controls and function switches for above
x.  Velocity fuses on all cylinders for fall protection

m. Air System :
a. Air system with on (1) 60 gallon receiver to provide air to main air line and brake system. Includes air lines, control valves, pressure gauges.

n. Air Compressor :
a. Air compressors with direct drive, mounted on engine.
b. Reciprocal type, 28 CFM capacity

o. Operator’s Controls :
a.   Operator’s console to include the following controls and instrumentation:
i.    Main drum brake lever
ii.   Main drum clutch controls
iii.  Two engine throttles – One (1) hand and one (1) foot
iv.  Shift levers for two 4-speed transmissions
v.   Two emergency engine shut downs
vi.  Hydraulic pump controls
vii. Two mud pump engine regulators
viii. Mud pump engine emergency shut down
ix.  Mud pump clutch controls
x.   Instrumentation Air Pressure Gauge
b. All air operated controls are located in the central part of the console and have identifying tags. Console is located to provide good visibility of traveling block, work floor and racking board.

p. Engine Emergency Shut Down :
a. One engine emergency shut down valve for emergency engine stop. Located at the operator’s console.

q. Trailer Mounted :
a. A heavy duty 4-axle trailer with air suspension and 109,000 lb. total capacity.
b. All lights and brakes are equipped for attachment to the truck
c. Spring brake chambers for safety.

r. Tires (12.00 x 22.5, Pirelli Radial) 16 each
a. All tires, disc wheels, 16 tires mounted as dual. Tire rating 109,000 lbs. total, all tires inflated to 100 psi.

s. Suspensions
a. One (1) two axle, single point bogey at rear.
b. Two single axles with air bags, air can be dumped for backing into position
c. All axles are 12.5 metric ton capacity.

t. Four Pedestals for Hydraulic Jacks
a. Pedestals under front jack for rig stability. Four pedestals require. There are to be six jacks for leveling the rig.

u. Six Hydraulic Jacks
a. Six hydraulic leveling jacks to take off the load from the axle and provide horizontal position of the rig during operation. Each jack is operated by its own controls and is equipped with screw with thrust nut, which allows relieving hydraulic pressure from he jacks during rig operation. Controls are located at the mast supports.

v. Fuel Tank
a. Mounted on the side of the chassis

w. Auxiliary Hydraulic Winch (2 winches using one for spare) :
a. Braden or equal hydraulic winch with 12,000 lbs. pull load at the first layer, 336 fpm @ 65 GPM and 2400 psi.
b. Hydraulic brake and spooler
c. Sheave is mounted on the crown

x. Rotary Table Drive
a. One rotary table drive with driveshaft and two air clutches(one for rotary on and off, second for emergency shut down)
b. Controls are located at the operator’s console

y. Rotary Table Drive Chain Gear Box :
a. Includes three oil-greased shafts inside full-length guard, complete with sprockets, flanges, chains and chain gear-box with one shaft to connect to rotary table. One lower section mounted on the trailer, one upper section mounted on the sub and one flanged driveline between.

Group II
A. OEM Hydraulically Telescoping 17-425 Substructure
1) Material and labor to fabricate one (1) OEM hydraulic telescoping 17-425 substructure as per the following :
i. Hydraulic Telescoping Substructure with :
 - 425,000# Rotary beams
 - 300,000# Setback.
 - Clear height under rotary beams = 14’
 - Transportation height 12’-6”
 - Base dimensions 45’L x 12’-6”W
 - Working floor dimensions 20’ x 26’
 - Rathole and mouse hole locations
 - Two tong backup posts
 - Removable braces in cellar area.
 - Provisions for attaching mast support beam.
 - Supply and installation of four (4) hydraulic scoping cylinders.
 - Pull out post for guy wires to front of mast.
 - Removable flooring around rotary table area.
 - B.O.P. Dolly and tracking.
The above substructure to be fabricated under A.P.I. 4F guidelines. Upon completion, substructure to be tagged with OEM A.P.I. 4F nameplate.

B. Mud Boat :
i. Material and labor to fabricate one (1) mud boat. Mud boat complete with :
  1. Supports under jacks on carrier.
  2. Pipe guides for tires
  3. Pin connections to mast support beam.
  4. Loading hitches on one end

C. Mast Support Beam/Brake Water Tank/Trip Tank Combo
i. Material and labor to fabricate one (1) mast support beam/trip tank/brake water tank combination. Combination complete with :
1. Brake Water Tank - Material and labor to fabricate one (1) break water tank. Tank to be enclosed for rig up winterization.
a. Tank to have the following :
i. Tank bottoms to be 3/8” plate.
ii. Tanks constructed with ¼” v-crimp.
iii. Tank rims to be 4” square tubing.
iv. Access ladder
v. Man way
vi. Tong buckets, guides, and safety cage.
vii. Supply and installation of :
   1. Two (2) 2 x 3 centrifugal pumps
   2. Heat exchanger

2. Trip Tank – Material and labor to fabricate one (1) trip tank. Tank to be enclosed for rig up winterization.
a. Tank to have the following:
i. Tank bottoms to be 3/8” plate.
ii. Tanks constructed with ¼” v-crimp.
iii. Tank rims to be 4” square tubing.
iv. Access ladder
v. Man way
vi. Tong buckets, guides, and safety cage.
vii. Provisions to mount:
   1. One (1) 2 x 3 centrifugal pumps

3. Mast Support Beam – Material and labor to fabricate one (1) three runner mast support beam.
a. Support beam complete with:
i. Supports for carrier jacks and bottom base of mast.
ii. Loading hitches on both ends for tailboarding.

D. Rig Floor Stairways – All stairs to meet OSHA standards with no slip grip strut stair treads.
i. Three (3) 17’-0” stairway from substructure floor to ground level. Stairs to be built on a 45-degree angle.
ii. One (1) 9’-6” stairway from top of the substructure to top of mud tank. Stairs to be built on a 45 degree angle.

E. V-Door Ramp - Ramp to be fabricated to work with a 17-0” floor height substructure and an 18” catwalk. Ramp to be fabricated with ½” plate and 3” pipe guides.

F. Catwalk – One 50’ x 5’-0” x 18” catwalk with snatch post mounted on one end.

G. Doghouse - House to be fabricated on a three-runner oilfield type skid with loading hitches on both ends for tailboarding. House to have checker plated flooring, v-crimped wall construction, and an arched type roof. House complete with the following :
  1. 4’-0” porch on one ends
  2. 2’-0” walkway on the back side of the doghouse running to full length.
  3. Handrails around house perimeter.
  4. One sliding doorway to rig side.
  5. One swing type doorways on both ends with windows built in.
  6. Two (2) windows on the back side wall
  7. Knowledge box
  8. Three compartment workbench.

Group III - Prime Mover Drive
A. Lighting System –Heavy Duty explosion proof Fluorescent and Mercury Vapor Lightning System designed to use with Mast and Substructure, Mud System, complete with Plug, Receptacles, Cable, Cable Clamps and all necessary Leads and fitting.  Lighting System consist of: Mast and Racking Platform, Substructure Lighting, Mud Tanks and Mud Pumps, and Utility House, including Battery emergency light at Driller’s console certified for Class 1 Division 2.

B. Engine/Generator/Part/Change Package
a. Utility House - “New” - Material and labor to fabricate one (1) utility house. House (43’x 12’ x 9’) to be constructed on an oilfield type skid (45’x 12’x 18”) with loading hitches on both ends for tailboarding. Top of skid covered with ¼” checker plate.
i. Parts/change house to be complete with :
  1. Twenty (20) lockers.
  2. Changing bench near lockers.
  3. Two sets of shelves on each wall running 8’-0”.
  4. One (1) bench on each wall. Bench compartments to be 5’-0” with folding bench. Two compartments to have ventilation to the outside for paint storage.

ii. Generator house complete with :
  1. One (1) 8’-0” sliding door on side of the generator location
  2. Provisions for mounting one (1) electrical plug panel.
  3. Radiator end of skid left open.
  4. Skid designed for generator tie downs to be mounted on cross beams of skid for safety.

b. Generator – Two (2) Detroit 60 Series 14L.

c. Electrical Specifications
i. Item 1 – Clarification
  1. Prime mover specifications were not provided; IEC Systems assumes the engine and generator sizes as listed in this proposal.
  2. The generator house will be designed to accommodate the “Three Tank Drilling Rig Standard” and thus be interchangeable with all rigs that meet the standard
  3. IEC System proposal is based on performing the installation in Houston, Texas.  All components listed below will be installed and tested
  4. Customer will furnish the voltage regulator and voltage rheostat

ii. Item 2 – Generator Houston Electrical System For a Mechanical Rig
 1. Generator House 480 VAC Switchboard
   a. 1 ea - A/C Generator Control Panel by IEC Systems for the control of two (2), 450 kW, 480 volt, 3 phase, 4-wire, 60 Hertz, A/C generators. 
   b. Switchgear to contain full instrumentation and will not be designed for full parallel operation of generators.
   c. Switchboard will be NEMA Type 1 enclosure with ASA #61 gray enamel finish, designed to meet NEMA and OSHA specifications. 
   d. All nameplates will be constructed of plastic plates, black on white for names and red on white for warnings.

GENERATOR CONTROLS MOUNTED IN THE SWITCHGEAR WILL CONSIST OF:
2 - Generator Main Circuit Breakers (Gen PWR)
2 - Generator "Power Available" Indicating Lights
2 - Voltmeters
2 - Voltmeter Switches
2 - Ammeters
2 - Ammeter Switches
2 - Frequency Meters
2 - Reverse Power Relays
1 - Ground Detection System
2 - Governor Control Switches
2 - Wire to Customer Furnished Voltage Regulators
2 - Wire to Customer Furnished Voltage Rheostats
1 - Lot Current Transformers, Potential Transformers, Fuse Blocks, Fuses, Buss Bar, Switchboard Wiring, and related equipment

Switchboard will be fully assembled, wired, and shop tested.

2. Generator House 480V Motor Control Center (MCC)
a. 1 ea - 480 Volt, 3-phase, 60 Hertz A/C Motor Control Center, equipped with braced horizontal and vertical bus
b. Enclosure will be NEMA Type 1 with front only access
c. Motor starters will be combination, full voltage- non-reversing with 3-pole overload blocks, heaters, control power transformer, operating handle, fuses and start/stop controls in cover with red "RUN" indicating lights
d. 480V MCC Motor Starters

i. Five (5) Size 4 Starters for :
   1 ea 60 HP Mud Mixer 1
   1 ea 60 HP Mud Mixer 2
   1 ea 60 HP Desander
   1 ea 60 HP Desilter
   1 ea Spare

ii. One (1) Size 3 Starter for:
    1 ea 40 HP Trip Tank
 
iii. Five (5) Size 2 Starters for:
   1 ea  20 HP Drill Water 1
   1 ea  20 HP Drill Water 2
   1 ea  25 HP Brake Cooling Pump 1
   1 ea  25 HP Brake Cooling Pump 2
   1 ea Spare

iv. 480 V MCC Motor Feeder Circuit Breaker
   1. 1 ea - 150 AMP 3 Pole Circuit Breaker for Camp Feeder

3. Generator House 480V Distribution Panel Boards
a. 1 ea - 480V POWER DISTRIBUTION PANEL BOARD (P1)
  i. 480V, 3-Phase, 3-Wire
  ii. NEMA 1 Enclosure
  iii. 600A MLO with Feed-Thru Lugs
  iv. 36 CKT with branch Circuit Breakers for the following loads:
     a. 1 ea - 100A/3-Phase CB for 75 KVA Lighting Transformer
     b. 1 ea - 60A/3-Phase CB for BOP Accumulator (30 HP)
     c. 1 ea - 60A/3-Phase CB for Spare
     d. 1 ea - 30A/3-Phase CB for Agitators 1, 2 Feeder (10 HP each)
     e. 1 ea - 30A/3-Phase CB for BOP House Heater (15 kW)
     f.  1 ea - 30A/3-Phase CB for Change House Heater (15 kW)
     g. 1 ea - 15A/3-Phase CB for Liner Washer 1 (3 HP)
     h. 1 ea - 15A/3-Phase CB for Liner Washer 2 (3 HP)
     i.  1 ea - 20A/3-Phase CB for Fuel Pumps 1 & 2 Feeder (3 HP each)
     j.  1 ea - 20A/3-Phase CB for Shale Shaker 1 & 2 Feeder (5 HP each)
     k. 1 ea - 30A/3-Phase CB for Spare
     l.  1 ea - 30A/3-Phase CB for Wireline (15 HP)

b. 1 ea - 480V DISTRIBUTION PANEL BOARD (P2)
  i. 480V, 3-Phase, 3-Wire
  ii. NEMA 1 Enclosure
  iii. 600A MLO with Feed-Thru Lugs
  iv. 30 CKT with branch Circuit Breakers for the following loads:
     1. 1 ea   100A/3-Phase CB for Hydraulic Power Unit (HPU), (50 HP)
     2. 1 ea   100A/3-Phase CB for Air Compressors #1 & 2 (25 HP each)
     3. 1 ea   20A/3-Phase CB for Vacuum Degasser (7.5 HP)
     4. 1 ea   30A/3-Phase CB for Dog House Heater (15 kW)
     5. 1 ea   60A/3-Phase CB for Agitators 3, 4, 5 Feeder (10 HP each)
     6. 1 ea   30A/3-Phase CB for Hopper House Heater (15 kW)
     7. 1 ea   40A/3-Phase CB for Spare
     8. 1 ea   60A/3-Phase CB for Spare
     9. 1 ea   30A/3-Phase CB for Spare
     10.1 ea  30A/3-Phase CB for Spare

4. Generator House 120/208 Distribution Panel Board
a. 1 ea - 120/208V DISTRIBUTION PANEL BOARD (P3)
  i. 120/208V, 3-Phase, 4-Wire
  ii. NEMA 1 Enclosure
  iii. 225 MLO, Top Feed
  iv. 42 CKT with branch (124/240V-10 KAIC) Circuit Breakers for the following loads:
     1. 1 ea -   100A/3-Phase CB for Rig Floor Lighting Panel
     2. 1 ea -   100A/3-Phase CB for Spare
     3. 1 ea -   100A/3-Phase CB for Boiler House Feeder
     4. 1 ea -   60A/3-Phase CB for Spare
     5. 1 ea -   30A/3-Phase CB for Spare
     6. 10 ea - 20A/1-Phase CBs for Lighting Circuits 1 thru 10
     7. 1 ea    20A/1-Phase CBs for Engine/Generator House Steam Heater Blowers
     8. 1 ea    20A/1-Phase CBs for Trip & Shaker Tank Steam Heater Blowers
     9. 1 ea    20A/1-Phase CBs for Mud Pump 1 & 2 Steam Heater Blowers
     10. 1 ea  20A/1-Phase CBs for Mixer Skid Steam Heater Blowers
     11. 1 ea  20A/1-Phase CBs for Engine/Generator House Lighting Circuit
     12. 1 ea  20A/1-Phase CBs for Generator 1 & 2 Block Heater Feeders

5. Generator House Plug Board
a. 1 ea Metal shroud protected weatherproof receptacle panel with matching plugs for all the above starters and circuits having cables that exit the Generator House. 
b. Receptacles to have protective vapor proof caps. Plugs and receptacles will be permanently identified.
c. 480V Plug and Receptacle sets provided for the plug board include all loads listed above in Section C and D (MCC and Panel Board Loads)
d. Additional Plug Board Spare Plugs and Receptacles
    6 ea   30A, 3-Pole, 480V
    5 ea   60A, 3-Pole, 480V
    2 ea   100A, 3-Pole, 480V

6. Generator House 480/208-120V Rig Lighting Transformer
a. 1 ea   75 KVA Transformer with 480V Primary and 120/208V Secondary mounted in a drip-proof enclosure.  Primary Power will be from the P1 Panel Board.

7. Generator House Power and Control Cabling
a. 1 lot A/C Power and Control Wiring by IEC Systems to connect two 450 KW, 480 volt, 60 Hertz A/C generators to 480V Switchboard
b. All A/C generator power cables with 90°C rates insulation sized/de-rated for use in 45°C ambient atmosphere.
c. 1 lot Glastic Plates to prevent excessive heat caused by electrical fields where power cables enter generators.
d. 1 lot  A/C Power and Control Wiring to connect A/C generator control panel to:
  i. MCC
     1. P1 Panel Board
     2. P2 Panel Board
     3. P3 Panel Board
     4. 75 KVA Lighting Transformer
     5. Generator House Plug Board (receptacles)

8. Generator House Lighting
a. Generator Sheds Lighting receptacle string complete with plugs and receptacles, cable, cable clamps, and all necessary leads and fittings to accommodate the following :
 i.   4 ea - C1D2 Hazardous Area fluorescent fixtures complete with lead
 ii.  1 ea - C1D2 Hazardous Area Metal Halide floodlight fixture complete with lead
 iii. 1 ea - Mounting Stanchions for Floodlights

Group IV - Rotating Equipment
B. “New” American Block Traveling Block and Hook
  a. 250 Ton Traveling Block, API load rating: 250 Ton, sheave groove 1 1/8”.

C. “Rebuilt” National C275 Rotary Table and Accessories
  a. 27 ½” rotary table with 27 ½” table opening, static load capacity : 650 ton, gear ratio 3.6 : 1, torque cap : 30,000 ft-lbs @ 60 rpm.

D. “Rebuilt’ Rotary Swivel
  a. 250 Ton

Group V - Circulating Systems
A. Two “New” Mechanical Drive 1000HP Mud Pumps
a. Two (2) “New” Eweco - 1100HP Mud Pumps
b. Two (2) “New” Detroit D2000 Engines
c. Unitized on one common skid with:
  i. Model C-300-100F(H) OWI Torque Converter
  ii. Belt Drive
  iii. Dual 24” Eaton Airflex
  iv. Drum Hub for 24” Dual Clutch
  v. Drum Flange, external 24”
  vi. 5 x 6 Centrifugal pump
d. Control system including :
  i. Air throttle
  ii. Air valve to engage and disengage clutch
  iii. Hoses and mounting hardware.

B. Two Tank 850 BBL Mud System  - Material and labor to fabricate one (1) two tank 850 bbl mud system as per our discussions. OEM to completely fabricate tanks (40’ x 10’-6” x 7’-0”) on a three runner oil field type skid (50’ x 7’-10” x 8”) with loading hitches on both ends for tail boarding. Tanks to have internal ladders to each compartment, equipment supports, fold down type handrails and covered with galvanizes bar grating .Mud system to consists of the following :

i. Shaker Tank – Four equal compartments
- Shale Pit
  • 10’-0’’ compartment
  • One (1) cleanout
  • One (1) overflow
- Desander Pit
  • 10’-0 compartment
  • One (1) cleanout
  • One (1) overflow
  • One (1) 6” suction line from 5 x 6 centrifugal pump.
  • One (1) 8” equalizer. Bottom mounted with top mounted handle.
- Desilter Pit
  • 10’-0’’ compartment
  • One (1) cleanout
  • One (1) overflow
  • One (1) 6” suction line from 5 x 6 centrifugal pump.
  • One (1) 18” equalizer. Bottom mounted with top mounted handle.
  • Equipment supports for one (1) 10 HP agitator
- Degasser Pit
  • 10’-0’’ compartment
  • One (1) cleanout
  • One (1) overflow
  • One (1) 8” bottom equalizer and one (1) 8” top equalizer.
  • Equipment supports for one (1) 10 HP agitator.
- 9’-0’’ Porch
  • Able to accept two (2) 5 x 6 centrifugal pumps
  • 10’’ equalizer line to Suction Tank.
  • Covered with ¼’’ Chk’d floor plate.
  • Overhead plated roof.

ii. Suction Tank – Two Compartments
- Suction compartment
  • 30’ – 0’’ compartment
  • One (1) cleanout gate.
  • Two (2) 6” suction lines going to main mud pumps.
  • Equipment supports for two (2) 15 HP agitators.
- Pill Compartment
  • 10’-0’’ compartment.
  • One (1) cleanout gate.
  • One (1) 8” equalizer. Bottom mounted with top mounted handle.
  • One (1) overflow
  • Equipment supports for one (1) 10 HP agitator
- Porch
  • Able to accept two (2) 5x6 centrifugal pumps.
  • 6’’ line to both pumps
  • One (1) discharge dumping line
     - Pill Tank
     - Suction Tank

iii. Accessories
1. Single slide for shaker. Slide to mount to the side of the tank and fold down during transportation. Slide complete with 6” pipe end for hose hook up in the field.
2. Single slide for desander. Slide to mount to the side of the tank and fold down during transportation. Slide complete with 6” pipe end for hose hook up in the field.
3. Single slide for desilter. Slide to mount to the side of the tank and fold down during transportation. Slide complete with 6” pipe end for hose hook up in the field.
4. Fold down type walkways around shaker area complete with galvanized grating and removable handrails. Walkways to fold down during transport.

iv. Solid Control Equipment
1. Four (4) Mission Magnum 6 x 5 x 11 magnum1 with a 10.5 inch impeller, mechanical seal and hard iron material, all  mounted on a mission fabricated steel base with woods style coupling, OSHA type coupling guard and a 75 HP 1750     RPM, 3 PH, 230/460 Volt, 60 Hz explosion proof electric motor.
2. Three (3) Derrick DE-AG-10 Agitators complete with 10 HP, 1800 RPM explosion proof C-face motor bolted to a gear box. Including shaft stabilizer, shaft and impeller.
3. Two (2) Derrick DE-AG-15 Agitators complete with 15 HP, 1800 RPM explosion proof C-face motor bolted to a gear box. Including shaft stabilizer, shaft and impeller.
4. One (1) Derrick two cone desander.
5. One (1) Derrick sixteen cone desilter.
6. One (1) Hopper with venturi.
7. One (1) Derrick Vacuum degasser 1200 GPM. Skid mounted with heavy duty 3 HP explosion proof 230/460 volt, 60 Hz, 3 Ph, 1800 RPM motor and manual starter with heavy duty vacuum pump.
8. Two (2) Derrick Flo-Line Cleaner 503 Shale Shakers w/weir feed complete with three panel screen frame, support structure, and explosion proof electrics with the following options :
  1.  A.W.D. (+7 deg uphill to –1 deg downhill)
  2.  Standard Screen Underflow hopper
  3.  Weir feed
  4.  Super G Vibrations Motors
  5.  Single side tensioning system
  9.  36” Poor Boy Degasser on a separate skid.

VI. BOP
A. Six (6) Station Accumilator
B. Choke & Kill Manifold
C. Note – BOP to be supplied by others (Not include in pricing.)

VII Utilities
A. Air Compressor & Receiver
  a. Two (2) Gardner Denver, ST-30, Electra-Saver II, rotary screw air compressor, Model EBE99Q. 30 HP, 460 volts, 3 phase, 60 HZ, TEFC, with NEMA 4 Control Enclosure.
  b. Two (2) Steel Fab, 400 gallon, vertical air receivers with full skirt, 200 psi working pressure.Part # A12614. Unit is California Coded.
  c. One (1) RNC250 air dryer for 250 CFM.

VIII. Instrumentation
A. Drift Indicator
    Totco Double Recording Drift 0 to 8° and 0 to 14°. Clock complete with following :
  -  1 ea. Godevil Kit
  -  1 ea. Chart tool & Chart Reader
  -  1 ea. Tool Maintenance Box w/ Tool
  -  100 ea. Chart 0 to 8° and 0 to 14°
  -  10 ea. Rubber Finger Stabilizer
  -  Fishing Tool 7 rope sockets

B. Indicator/Gauge & Counter
    EMS-2 or Equivalent Rotary Torque indicator, Weight indicator, and Tong torque gauge, Circulating pressure gauge, two (2) ea. Pump stroke counter.

C. Drilling Recorder
    EMS-2 or Equivalent Drilling recorder, 9 pen (weight, torque, penetration rate, pump pressure, rotary rpm). (Diameter 103 Dan Kurang 6 Buah Printed Circuit Board).

D. PVT
    EMS-2 or Equivalent Pit volume totalizer, single channel with audio alarm and warning lights, four pit transmitters totalizing relay, gain and loss gauge with gauge zero devices.  Full digital instrumentations.

E. Flow-Shoe-Device
    EMS-2 or Equivalent Device complete with recorder and alarm system

Group IX - Fabrications
A. Accumulator/Junk Bend/Air Package Combo
 a. Material and labor to fabricate one (1) accumulator/pipe bend skid as per our conversations. OEM to fabricate a three runner oilfield type skid (40’ x 10’ x 12”)
     covered with ¼” check plate. Piping to be done during rig up. Skids complete with:
  i. One (1) arched type roof and enclosure.
  v. Mounting supports for two (2) vertical air receivers.
  vi. Mounting supports for one (1) accumulator.
  vii. Mounting supports for:
     1. Two (2) air compressors
  viii. Access doors
     1. One 36” swing type door way
     2. Two (2) 48” double door way.

B. Parts/Mechanic Shop - “New”
    Material and labor to fabricate one (1) parts/change house. House (38’x 10’x 9’) to be constructed on an oilfield type skid (40’x 10’x 12”) with loading hitches on both ends for tailboarding. Top of skid covered with ¼” checker plate. House to be complete with:
     • One (1) work bench and One (1) Table
     • Two sets of shelves on each wall.
     • Four (4) storage benches.

C. 500 bbl Water Tank
Material and labor to fabricate one (1) 500 bbl water tank as per our conversation. Tanks fabricated on oilfield type skids with loading hitches on both ends for tailboarding. Skid ends to be covered with ¼” check plate. Tanks complete with the following :
 -  Two (2) 3 x 2 x 11 Centrifugal pumps with 25 HP Motors
 -  Suction and Discharge Piping.
 -  Two (2) ladder rung to top of tank (In and Out)
 -  4” Fill cap
 -  2” Outlet
 -  1” Drain

D. One (1) 12,000 Gallon Fuel Tank
Material and labor to fabricate one (1) 12,000 gallon fuel tank as per our conversation. Tanks fabricated on oilfield type skids with loading hitches on both ends for tailboarding. Skid ends to be covered with ¼” check plate. Tanks complete with the following :
 -  Two (2) fuel transfer pumps
 -  One (1) filter system.
 -  Suction and Discharge Piping.
 -  Two (2) ladder rung to top of tank (In and Out)
      Top and Side man ways, 4” Fill cap, 2” Outlet, and 1 ½” Drain

E. Cable Trays - Material and labor to fabricate one (1) lot of cable trays as per the following. Cable trays to be fabricated as follows :
 -  Two (1) 40’-0” sections from substructure to fuel tank.
 -  One (1) 35’-0” section from mud tanks to main trays.
 -  One (1) 20’-0” section from substructure to main stairs.
 -  Cable trays complete with the following:
     •  Hinged doors in 5’-0” sections with chain for each doorway.
     •  Flat expanded metal running the length of each tray.
     •  ½” round bar at each end of cable tray to provide protection when pulling wires.

F. Mud Gas Seperator and Transportation Skid - “New”
  - Material and labor to fabricate one (1) 36” poor boy degasser and skid. Gas buster to me mounted on a three-runner oilfield type skid with loading hitches on both ends for tailboarding. Gas buster complete with :
     •  36” Pipe with weld caps on both ends.
     •  Internal baffles.
     •  All piping and pipe brackets.
     •  Gas buster to elevate to working condition to allow operation under half full conditions.
     •  Gas buster to be mounted in lay down position for transport and to be raised by truck for operation.

Group X - Rig Up Items
A. High Pressure Piping
 a. Material and labor to fabrication one (1) lot of high-pressure piping. All piping to be 4” schedule 160 and all unions to be weld type 1002. High pressure piping complete as per the following:
   i. Standpipe
    1. Standpipe to be located on the Off-Driller’s Side.
    2. Standpipe to have hammer union breaks at mast sections so it can me transported without being taken off the mast.
  ii. Standpipe Manifold
    1. The standpipe manifold will be complete with manifold type tee with two 2” outlets. Outlets to have hammer union connections only.
    2. The 4” outlets to have a 4” gate valve on the top of the cross.
  iii. High Pressure Line
    1. The high-pressure line will run from the bottom of the standpipe manifold to the side of the mud boat
    2. The cellar line will  be mounted to the mast support beam.
    3. There will be hammer unions at break of the substructures for transportation.

B. Structural set and assemble
 a. Mast and Substructure
   i. Mast accessories.
   ii. Install flooring, handrails, v-door, stairs, etc.

C. Set and align
  a. Rotary Table
  b. Drawworks
  c. Doghouse
  d. Utility house control panel and foot drawworks console.
  e. Mud Pumps
  f. Brake water/trip tank
  h.Water Tank/Fuel Tank
  i. Catwalks and pipe racks
  j. Cable Trays
  k. Koomey/Junk basket

D. Piping, Fittings, hoses, valves, etc.
  a. Water Supply
   i. To Mud system and mixing system
   ii. Rig Floor
   iii. Brake water system
   iv. Feed and return lines from brake water tank to drawworks drum and brake.
   v. Fuel System
        1. To feed and return lines from duel tank to generator set.
  vi. Air System
        1. Air Supply for accumulator unit and rig floor
        2. Hose connections from rig floor air manifold to drawworks control console, air hoist and other floor tools
  a. To generator set engine starters
  vii. Miscellaneous
       1. Vibrator hoses.
  viii. Electrical Rig Up
  ix. Testing
     1. Fill mud tanks with water
     2. Provide lube products to all machinery.
     3. Provide Fuel for testing
     4. Circulate water through mud system
     5. Run air compressors.
     6. Pressure test all high pressure lines and connections to working pressure
     7. Run all solids control equipment.
     8. Load test generators
     9. Test all SCR assignments.
  x. Rig Down
     1. Rig down and assist in load out on customer furnished trucks.

Delivery : Seventy-five to ninety (75-90) days from receipt of purchase order and down payment.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

Drilling Rigs

----------------------------------------------------------------------------------------------------
Search words (for official use only
MechanicalTrailer Mounted Drilling Rig for Sale
1000HP Land Rig Dealers
1000 HP Mechanical Trailer Drilling Rig for Sale
1000HP land Rig For Sale
1000HP Drilling Rig for Sale - Mechanical Trailer
Drilling Land Rig for Sale - 1000 HP
1000 HP Land Drilling Rig For Sale
Used 1000hp Mechanical Trailer for Sale in USA
1000hp Land Rig Builders

----------------------------------------------------------------------------------------------------

 
LCI 750 Drilling Rig for Sale
Worldoils Marketplace
LCI 750 Drilling Rig for Sale

Worldrigs ID: WR674

LCI 750 Drilling Rig for Sale
Carrier Mounted Drilling Rig for Sale
1000 HP drilling rig for sale


Introduction :
The rig is a loadcraft industries 750 drilling rig with mast hook load capacity of 365.000 lbs
(160 metric ton), powered by two caterpillar C15 diesel engines, coupled two allison 6061 RB
transmissions with torque converter. The mast is 114ft (36m) rated at 365.000 lbs API capacity.
Drawworks have 1000hp capacity. All equipment is mounted on a 7 axle carrier. The rig is
equipped with a telescoping substructure at 17ft 6 inches (5.3m) height.
The mast is equipped with a torque arrest beam for the top drive and with piping and necessary
loops to operate the top drive. The total rig is built for extremely quick rig up/down time.
The TD is a northdrill API 250 ton rated with continuous torque rating of 40.500 ft-lbs.
All necessary equipment to operate the top drive in is included with the rig.

1. Carrier
Section 1.1 carrier
- Seven axle heavy-duty carrier for load of 140.000 lbs. Fully equipped with lights and brakes
etc for normal driving operation. All axles have spring brake chambers for safety.
- Tires and wheels are disc wheels, 14"20 all terrain tread. Tire rating of 52.000 psi total.
Two spares delivered.
- Two 100 gallon (2x420 L) fuel tanks side mounted on carrier frame, connected for equalization.
- One toolbox storage box of steel with reinforced lockable doors.
- Eight side platforms with handrails on both sides along the carrier body, four on each side.
Each platform is approx. 6ft x 2 ft (1,8x0,6m)
- One staircase section from side platforms to ground level.
- Hercules 129 HA deadline anchor to be used with compression type weight sensor. Drum type
mounted on carrier frame in front of drawworks frame, hydraulic sensor included.
- Four pedestals to go under front jacks for rig stability.
- Total of six jacks for leveling the rig.

Section 1.2 hydraulic system
- 50 GPM (190 LPM) hydraulic system, design to operate at minimum 2000 psi with rating of
50 gpm at 2100 psi.
- Hydraulic pump driven from PTO on transmission.
- Air activated clutch for pump engagement.
- 325 gallon (1230 L) hydraulic oil tank with filler cap, breather, oil level, oil temp.

Section 1.3 tong circuits
- Tong hydraulic circuit is designed to operate up to 50 gpm at 2000 psi.
- Includes connectors, pressure & return lines, pressure gauge, directional flow valve and pressure
regulating valve.

Section 1.4 handling winch
- Hydraulic powered planetary winch 8000 lb (3.6 t) line pull, rated at 100 ft (30m) per minute at
2000 psi hyd. pressure.
- 325 ft (99m) of 1/2" line on drum
- Fail safe brake (in/out hydraulic activated)
- Winch sheaves provided in crown
- Protection cage on winch
- Controls at operators console

2. Main power/engine
Section 2.1 engine/transmission
-Two caterpillar C-15 540 hp diesel engines
- Equipped with limiting speed governor, air throttle sctuator, lube and fuel filters, alternator and
flywheel housing.
- High ambient radiators and suction fan, permanent type anti-freeze, signel exhaust with spark
arrester diverted to off-operator side with mufflers.
- Engine kill valve located at operators console
- Electric start (remote from operators console)
- Both engines can run at the same time or only one if adequate.

Section 2.2 transmission
- Allison S 6061 RB model six-speed transmission (five fwd 1 rw)
- With converter and oil cooler
- Air over hydraulic controls, with air line indicator system
- Controls available at operators console and in drivers cabin

3. Drawworks
Section 3.1 drawworks
- Model 4212 drum winch assembly
- Full air, fawick "28VC-1000" clutch outside drawworks frame.
- Brakes are 42" (107 cm) diameter x 12" (30,5 cm) wide, lined with 1 inch (2,5 cm) x 12" (30,5 cm)
- API driled brake blocks, full wrap dead-end equalized
- Brake rims are removable with rings for splash water cooling
- Brake operatoin shafts are mounted on ball bearings; these are self engaging and release
by operator.
- Drum barrel is 18" (45,7 cm) in diameter, and 38" (96,5 cm) long, mounted on double row
self-aligning spherical roller bearings on a 6 1/2" (16,5 cm) drum shaft
- Clutch single line pull is 42.500 lb on bare drum and first gear.

Section 3.2 lubrication
- Centralized lubrication system to all bearings and brake linkage on drawworks, is located
outside frame.

Section 3.3 brake water cooling
- Closed loop brake cooling system, mounted on carrier
- Includes 425 gallon tank with covered top, with level indicator
- Removable cap with drain system, breather and fill cap.

Section 3.4 drawworks drive
- ASA-100-3 (1 1/4") pitch, triple stand, roller chain
- Chain drive from input sprocket to sprocket on jackshaft
- ASA-100-3 (1 1/4") pitch, triple stand, roller chain as final drive to main drum

Section 3.5 main drum - grooved jacket
- Lebus counter balanced sleeve is grooved for 1 1/8" wireline, to assist spooling, and reduced line wear.

Section 3.6 hydrotarder
- Parmac 202 hydrodynamic brake assembly with dual rotary
- Fawick 28 VC 1000 air clutch, gates, inlet air valve and piping
- 325 gallon (1230 L) water tank, lines, valves and plumbing installed on rig.
- Drive from the main drum thru triple stand 1 1/4" pitch drive chain.

Section 3.7 combined gearbox
- Cushman model 279 combined gearbox consisting of right angle gearbox and dropbox.
- Right angle gearbox ratio 1:1 to drive single drum drawworks. Dropbox to transfer torque to rotary.
- Pressurized lubrication system.

Section 3.8 sandline drum
- Sandline drum with 42x8 brake size, for handling 16,500 ft of 9/16" wireline on drum
- Brakes are removable for water splash cooling of the brake rims
- Single line pull is 26,000 lbs on the drum

Section 3.9 rotary drive
- Provided at the dropbox for power connection- Elevated chain drive is oil bath type consisting of drive
sprocket at bottom of case with ASA 140-2 (1 3/4") pitch double

4. Mast
Section 4.1 mast
- 114 ft (33,5m) clear working height with an API rated static hook load of 330.000 lb with 8 lines,
and 365.000 lb with 10 lines.
- Designed to withstand 69mph winds from any direction
- Telescoping twin box structure designed and built to API standards.
- Two section with upper section telescoping into lower section for rig move operation.
- Automatic mast latching in raised or lowered position
- Lock and operating control located at base of mast
- Ladder from base to crown with safety blocks for personnel
- All necessary chains, turnbuckles, pins etc included and certified
- 4 inch standpipe rated 5000 lb, welded with 1502 unions.

Section 4.2 crown assembly
- Bender crown arrangement for 8 or 10 lines string up with conventional block.
- One 36" fastline sheave, grooved for 1 1/8"
- One 36" deadline sheave, grooved for 1 1/8"
- Four 30" sheaves cross mounted, grooved for 1 1/8"
- Two catline sheaves
- Crown sheaves are steel with flame hardened grooves.
- Sheaves are mounted on timken tapered roller bearings and all carry certification.
- Crown platform with railing for personnel safety
- Attachment point for four wind guylines from crown to ground is provided.

Section 4.3 tubing board
- All welded construction
- Automatically raised or lowered at mast telescoping
- Mounted at 55 ft above setback
- Board fingers are for 17.000 ft of 2 7/8",  or 11.400 ft of 3 1/2" tubing
- 2 ft 6 inch wide tubing board walkway
- Handrails at board outside
- Attachment points for safety line (escape line) at each corner.

Section 4.4 weight indicator
- Weight indicator complete with sensor
- 12" dial indicator
- Box mount with 25ft of hose assembly
- Calibrated in NM and LBS
- Charts for 6, 8 and 10 lines on indicator

Section 4.5 crown saver
- Load and crown saver installed on drawworks
- Automatically disengages clutch and sets drawwork brakes if block comes too close to crown.

5. Substructure
Section 5.1 hydraulic telescoping substructure
- Working floor height of 17,5 ft (5,3m) with 14 ft in clear under rotary beams
- 4,5 ft is the maximum height when scoped down for transportation
- 10ft 6 in max width when scoped down
- Capacity of 365.000 lbs (160 mt) on rotary beams and 225.000 lbs (100mt) at setback
- Sub base is equipped with fold out wings, total floor area is 18ft wide x 18ft long
- Handrails with toeplate surrounding the entire floor
- One stairway from floor to carrier level
- Pipe ramp with steel plating
- Setback covered with 3" oak timbers
- Two tong backup poles in drilling configuration
- Rat and mousehole access
- BOP handling system with to rails integrated under the floor. Each rail rated at 5 ton.
- Carrier ramp is included with the sub, 10 ft wide to allow the rig to rest completely on the base of
the ramp. Comes in two sections.

Section 5.2 catwalk
- Catwalk assy of 4ft wide x 45 ft long x 3 ft high with built in stair , and bump post.

Section 5.3 hydraulic catworks - make & break-out
- Breakout cylinder has 6ft stroke with 20.000 lb maximum line pull
- Makeup cylinder has 6ft stroke with 20.000 lb maximum line pull
- Cylinder mounted in lower mast section, and includes wireline, turn back sheaves and plumbing
for hydraulics
- Both cylinders are controlled from operators console

6. Top drive
Section 6.1 TD power pack
- One 20ft oilfield skid power pack mounted in a weather and sound protective 30ft container.
- Main motor caterpillar C18 700 hp
- Main HPU at 550kW for TD main power, 2400 L reservoir, two main pumps
- Inline filters for all lines
- Engine driven and electric driven aux hpu for pipehandler functions
- Advanced PLC & HMI system to monitor and control TD system
- All controls integrated at operators console on rig floor
- Quick connectors for all cables and lines on TD system for quick rig up/down

Section 6.2 TD rig equipment
- Mast outfitted with piping for quicker rig up/down with the TD system
- Torque tube beam installed in the mast, and anchored to the mast lower section
- Turnbuckles, chain etc for the torque beam
- Loops from mast to TD (stays in the mast during rig move)

Section 6.3 TD hookup to rig
- The TD power pack connects to the rig by 4 hydraulic hoses that connect on ground level
at the base of the mast
- One 1/4" electrical cable is run up the mast and to the TD for control system
- Five 1/2" electrical cables is run to the operator console for TD operator control
- A power input of 440,160 or 480v to supply the system with electricity
- 1 kW is sufficient to run the system, 40 kW is needed to operate the electrical aux HPU

Section 6.4 TD main specifications
- Continuous torque rating of 40.500 ft-lbs
- Max rpm of 110 in first gear, and 180 in second gear
- Max breakout rating of 43.000 ft-lbs
- Pin connection 6 5/8 RH
- TD is equipped with onboard oil cooler
- Electric over hydraulic onboard valve section for all function control
- Onboard PLC and monitoring equipment

Section 6.5 TD pipehandler specifications
- 360 degrees free traveling orientation
- Backup tong capable of holding up to 80.000 Nm and range from 3 1/2" to 6 5/8" pipe
- Link tilt and retract function for drilling down to floor
- Integrated availability for remote operated elevator
- Upper remote operated IBOP and lower manually operated IBOP rated at 10.00 psi
- Telescopic leg for positioning of backup tong for make or break of saver sub
- Link arms 108 inch
- Manual elevator for 3 1/2" pipe
- Saver sub to 6 5/8 RH and to 5" RH

7. Additional equipment
Section 7.1 handling winch nr.2
- One additional winch equal to above listed handling winch specs

Section 7.2 V-door ramp and pipe racks
- One 48in x 3ft6in x 45ft catwalk from the rig floor level to the 42in high catwalks
- Four 42in x 28ft long pipe racks

Section 7.3 rotary table
- One 22" rotary table, 44" centers complete with split square solid steel master bushing,
spiral bevel gears, precision bearings throughout, removable box cover with lifting eyes,
positive pinion shaft lock and centralized lube system

Section 7.4 high pressure piping
- One 4" 5000 psi mud line and manifold for gauge and kill line, with 1502 union
- 4" 5000 psi standpipe on the lower mast section, with 1502 unions

Section 7.5 crown o'matic
- Combined crown and drawworks type crown-o-matic system for saving mast failures is
installed on the drawworks, and is set for locking the brakes down at activation

Section 7.6 safety chair (board escape)
- One T-bar type escape chair for tubingboard escape

Section 7.7 mast guylines
- Guylines are included, four of 5/8 lines from crown, two from board and two from the mast
mid section. All certified

Section 7.8 block hook
- One of ABCO 250 ton standard hook block
- Clevis kit for use with TD to shorten total assembly length included

Section 7.9 wire rope
- Drill line 1 1/8" wireline rope at 2500 ft, certificates provided
- Drill line spool is included at the front of the carrier by the cab
- 12.000 ft of sandline 9/16" included

Section 7.10 dead line anchor-indicator assy
- Anchor for 1,125" wirerope, for mast pull of 365.000 lbs for 10 lines string up on crown
- Anchor certified, and load cell included

ND 250 H2 (dual ratio)
- Continuous drill torque : 29.800 / 41.000 ft-lbs
- Max breakout torque : 43.000 ft-lbs
- Speed range : 0-200 rpm
- Dual ratio gearbox : Yes
- Gearbox ratio : 1:11.1 / 1:14.9
- Hydraulic motors : 2 x 320 kW max
- System total power rating : 700 hp
- Hydraulic system pressure : 6000 psi / 3000 psi
- Powering engine : C18

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

Land Drilling Rigs

----------------------------------------------------------------------------------------------------
Search words(for official use only) :
LCI 750 Drilling Rig for Sale
Used 1000hp Carrier Mounted Drilling rig
1000 HP Drilling Rig for Sale - LCI 750
 
1000hp Land Rig Builders
1000hp Land Rig Dealers
Drilling Land Rig for Sale - LCI 750 - 1000 HP
1000HP land Rig For Sale
Carrier Mounted Drilling Rig for Sale
1000 HP Land Drilling Rig For Sale - LCI 750
----------------------------------------------------------------------------------------------------

1000 HP SCR drilling rig for sale
Worldoils Marketplace
1000 HP SCR drilling rig for sale

Worldrigs ID: WR673

National 80UE drilling rig for sale
Used 1000HP SCR Land Rig for sale
1000 HP SCR National 80UE Land Rig for sale
National 80UE - 1000 HP SCR drilling rig for sale

Drawworks
:
• 1000 HP 80UE National Drawworks with water brake.
• Powered by (1) 752 series type traction motors.
• Foster catheads

Mast :
• DSI
• 142’ x 25’ mast rated at 750,000 lb. static hookload, 500,000 lb. setback

Substructure :
• DSI
• 22’ substructure with rotary capacity at 750,000 lb. and a setback of 500,000 lb.
• Sub is a box-on-box type.

Pumps :
• Two (2) F1600 pumps
• Independently powered by two (2) 752 traction motors.
• Pumps complete with all plumbing, pulsation dampeners, and 5x6 charge pumps.

Rig Houses, tanks :
• Drillers top doghouse= 9’ H x 8’6” W x 35’L
• Mudhouse= 9’H x 10’ W x 35’ L
• Partshouse= 9’H x 10’ W x 45’ L
• Water Storage= 9’ H x 10’ W x 45’ L with two (2) 2” x 3” centrifugal pumps.
• Fueltank= 12,000 gallons

Mudsystem :
• Two (2) 8’6” H x 10’ W x 47’ L mudtanks (1000 BBL)
• Tanks to have necessary piping, valves, dump gates, & compartments
• One (1) 2-cone desander
• One (1) 10-cone desilter
• Two (2) derrick style linear shaker
• Four (4) mud agitators with 10HP motors
• Four (4) 5” x 6” centrifugal pumps with 75HP motors

Rotary Equipment :
• One (1) 27-1/2” rotary table
• One (1) 400 ton swivel
• One (1) Varco model HD Kelly drive bushing

Traveling Equipment :
• One (1) 400 ton block
• One (1) set of 3 ½” x 108 elevator links

Well Control :
• One (1) 11” x 5000 PSI annular
• One (1) 11” double ram preventor
• One (1) 180 Gallon Koomey type closing unit
• One (1) Koomey type remote
• One (1) 2” x 5000 choke manifold
• One (1) B.O.P. lines suitcase

Instrumentation :
• One (1) Totco type 50 weight indicator
• One (1) Totco 100 rotary torque
• Two (2) mudpump SPM
• One (1) rotary RPM
• All above mounted in Totco drilling console
• Geolograph

SCR House :
• Ross Hill 3 generator x 4 SCR system
• 9’ W x 40’ L x 9’ H house

Power Equipment :
• (3) 3512 C Cats with 1050 KW generators
• Generators mounted on 10’ W x 35’ L x 9’ H skids
• (2) Gardner Denver 30 HP screw type compressors
• (1) Gardner Denver cold start compressor

Auxilliary Equipment :
• One (1) Mathey wireline unit
• Two (2) air winches
• Misc. (1) set of handling tools
  (1) Spinnerhawk powertong
  (1) Kelly Spinner
  (3) 18” x 30’ pipe racks

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


Land Rigs

----------------------------------------------------------------------------------------------
Search Words(for official use only
National 80UE drilling rig for Sale
1000 HP SCR National 80UE Land Rig for sale
National 80UE - Used American Land Rigs
Used 1000hp Drilling rig - National 80UE
1000HP SCR - National 80UE Drilling Rig for Sale
1000HP SCR drilling rig for sale
Land Drilling Rig For Sale

----------------------------------------------------------------------------------------------


 

 
Drilling Rig for Sale - 1000 HP SCR
Worldoils Marketplace
Drilling Rig for Sale - 1000 HP SCR

Worldrigs ID: WR670

SCR drilling rig for sale
Used American 1000HP Land Rig
Gardner Denver 1000 HP SCR drilling rig for sale

Drawworks :
• Gardner Denver 1000 HP Drawworks with water brake.
• Powered by (1) 752 series type traction motors.

Mast :
• DSI
• 142’ x 25’ mast rated at 750,000 lb. static hookload, 500,000 lb. setback

Substructure :
• DSI
• 22’ substructure with rotary capacity at 750,000 lb. and a setback of 500,000 lb.
• Sub is a box-on-box type.

Pumps :
• Two (2) F1600 pumps
• Independently powered by two (2) 752 traction motors.
• Pumps complete with all plumbing, pulsation dampeners, and 5x6 charge pumps.

Rig Houses, tanks :
• Drillers top doghouse= 9’ H x 8’6” W x 35’L
• Mudhouse= 9’H x 10’ W x 35’ L
• Partshouse= 9’H x 10’ W x 45’ L
• Water Storage= 9’ H x 10’ W x 45’ L with two (2) 2” x 3” centrifugal pumps.
• Fueltank= 12,000 gallons

Mudsystem :
• Two 8’6” H x 10’ W x 47’ L mudtanks (1000 BBL)
• Tanks to have necessary piping, valves, dump gates, & compartments
• One 2-cone desander
• One 10-cone desilter
• Two derrick style linear shaker
• Four mud agitators with 10HP motors
• Four 5” x 6” centrifugal pumps with 75HP motors

Rotary Equipment :
• One 27-1/2” rotary table
• One 400 ton swivel
• One Varco model HD Kelly drive bushing

Traveling Equipment :
• One 400 ton block
• One set of 3 ½” x 108 elevator links

Well Control :
• One 11” x 5000 PSI annular
• One 11” double ram preventor
• One 180 Gallon Koomey type closing unit
• One Koomey type remote
• One 2” x 5000 choke manifold
• One B.O.P. lines suitcase

Instrumentation :
• One Totco type 50 weight indicator
• One Totco 100 rotary torque
• Two mudpump SPM
• One rotary RPM
• All above mounted in Totco drilling console
• Geolograph

SCR House :
• Ross Hill 3 generator x 4 SCR system
• 9’ W x 40’ L x 9’ H house

Power Equipment :
• (3) 3512 C Cats with 1050 KW generators
• Generators mounted on 10’ W x 35’ L x 9’ H skids
• (2) Gardner Denver 30 HP screw type compressors
• (1) Gardner Denver cold start compressor

Auxilliary Equipment :
• One Mathey wireline unit
• Two air winches
• Misc. set of handling tools
   (1) Spinnerhawk powertong
   (1) Kelly Spinner
   (3) 18” x 30’ pipe racks

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

Drilling Rigs

----------------------------------------------------------------------------------------------------
Search Words(for official use only) :
SCR Drilling Rig for Sale
Drilling Rig for Sale - Gardner Denver 1000HP SCR

Used American Land Rigs
Used American 1000hp Drilling rig
1000HP Land Rig Builders
1000HP SCR Gardner Denver drilling rig for sale
Land Drilling Rig For Sale
Gardner Denver drilling rig for Sale

----------------------------------------------------------------------------------------------------

 

 
2000HP AC VFD Rig - Bomco
Worldoils Marketplace
2000HP AC VFD Rig - Bomco

Worldrigs ID: WR668

Bomco VFD AC New Rig For Sale
New Bomco VFD AC 2000HP rig for sale
BOMCO 2,000HP AC Drilling Rig


Classification :
Bomco, 2,000HP AC, drilling depth capacity to +/-23,000’

Drawworks :
Bomco Single Drum with AC motors (2) c/w Auto Driller

Mast :
Bomco 149’x 32’ base 1,000,000lbs. static hook load

Substructure :
Bomco Swing-Up ; Rotary table cap 1,000,000 lbs. Set back 495,000 lbs. 
- Two (2) Doghouse
- One (1) Drillers Cabin

Power System :
Four (4) Cat 3512B Engines 1,476 BHP ea.; SR4B 1750KVA Generators,
one (1) Aux. Generator

VFD House :
Power Circuit Breaker – 2000AF/1800AT, 600Volt, 3 pole, 65 kA IC, UL/CSA   
- Three(3) voltage-source inverters for three (3) mud pump AC motors (one 1200kW motor each mud pump)
- Two (2) voltage-source inverter for 800kw AC motor to drive Drawworks
- One (1) 800kw voltage-source inverter for 800kw AC motor to drive rotary table.
- One (1) Votage-source inventer for 42.5kw Auto-driller motor

Mud Pumps :
Three (3) 1,600HP triplex pumps, 8" x 6" x 100HP Charge Pumps

Mud System
2,000Bbls Active   
Three (3) DERRICK FLC 2000-3 panel Linear Motion Shakers,
One (1) each Derrick FLC 2000 Desander/Desilter
One (1) Vacuum D-Gasser
One (1) High Speed Centrifuges
Two (2) 8" x 6" x 100HP Mixing pumps & Hoppers
Thirteen (13) Agitators,
                                    
Drill Line :
6 x 19S + IWRC, EIPS, 1-1/2”, 1200m wire rope.(API 9A)

Rotary Table :
Bomco 37 ½” driven by DC Motor

Traveling Block & Hook : Bomco

Swivel : Bomco
     
BOP Handling System : One (1) set 

Air Compressor :
Two (2) 5.5 m³/min Srew type

Auxiliary Equipment :  
One (1) 500 Bbl. water tank w/ 2 x pumps
One (1) 750Bbl fuel tank w/ 2 x pumps
Three (3) air hoist 11,,000lbs
Two (2) Hydraulic Cathead
One (1) set each 350 ton and 500 ton Elevator Links
One (1) Drill Line Spooler, Hydraulic Drive

One (1) set CCTV Monitoring System
One (1) set MD Totco Drilling Instrumentation System
One (1) set HPU & Controls
One (1) Casing Stabbing board
One (1) set Catwalks & Pipe Racks
One (1) Drill Floor Tool Elevator. 

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


Land Drilling Rigs

 ----------------------------------------------------------------------
Search words (for official use only) - 
Bomco VFD AC New Rig
2000HP Land Rig Builders
Land Rig Sellers
2000HP Land AC Rig For Sale
Land Rig Brokers
New Bomco 2000HP AC Rig for sale
AC Rig Builders
Land Rig VFD AC Rig

---------------------------------------------------

New Land Workover Rig 375 hp
Worldoils Marketplace
New Land Workover Rig 375 hp

Worldrigs ID: WR653

Four Axle Carrier Mounted Land Workover Rig
375 hp Land Workover Rig
Carrier Mounted 4-axle 375hp Workover Rig


4 AXLE CARRIER 96' 180,000# DERRICK

Detroit Series 60 Tier II 12.7 L

4500 OFS ALLISON TRANSMISSION

DRAWWORKS WITH DISC ASSIST, 375 HP RIGHT ANGLE GEAR BOX

38x10-38x8 DOUBLE DRUM

HYDRAULIC RAISED AND SCOPED

4 HYDRAULIC LEVELING JACKS

DERRICK BOARDS FULLY AUTOMATIC

FRONT END -20,OOO#EACH/40,000#

REAR END -23,000#EACH/46,000#

25,000# TAG~LE

FRONT TIRE SIZE 38565R22.5

REAR TIRE SIZE 11R22.5

10% DOWN PAYMENT REQUIRED BEFORE CONVERTING TO A
FINAL INVOICE BEFORE PAINT.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


Land Drilling Rigs

--------------------------------------------------------------------------------------------------------
Search words(for official use only) -  
Four Axle Carrier Mounted Land Workover Rig
All American made Carrier Mounted 4-axle workover rig - new
Workover Land Rigs for sale - 375 hp 4-axle
New Land Rigs from America - Workover Rig
US made Land Rigs For Sale
New Workover Rig For Sale - Four Axle carrier Mounted
375hp Workover Rig For Sale
350hp Workover Rig For Sale
Land Rig for Sale - New 375hp Rig
-------------------------------------------------------------------------------------------------------
 
IDECO H30 Double - 3000m - Used Workover Rig
Worldoils Marketplace
IDECO H30 Double - 3000m - Used Workover Rig

Worldrigs ID: WR634

Ideco H30 Double Workover Rig For Sale
Workover Rigs For Sale
3000m Used Workover Rig For Sale

Ideco H-30 model with a 40 X 8 – 3808 drum size
Self propelled double drum, back in & 4 axel carrier
Rated capacity of 3000m – 73mm tubing
Detroit 8V92N, 365 hp - 225 kW engine
Allison CLT5860 6 speed transmission

20.3 X 101.6 main drum brakes
20.3 X 96.5 sand line brakes
Pemco 96-170, 29m rated,
78 dNa & stung 6 lines mast
3000m of 73mm tubing racking capacity

Sowa 0824-3-A 100 ton travel blocks
Vapor proof florescent & sodium lights
25.4 mm X 300m drilling line
14mm X 3000 m sand line
Hydraulic martin decker clipper weight indicator
Dual winches

Combination :
3 compartment skidded steel building
3.5m w x 11.6m l
John Deer 75 kW generator

Handling equipment :
Foster 58-93R tubing tongs
Cavins advance model C air slips
BJ-90-TA -100 ton X 73mm & BJ-90-TA-65 ton X 60.2 mm elevators
73 mm & 60.3mm are the standard tubing sizes
19mm – 25mm rod sizes
2 – 2.4m x 13.7m & 1 – 2.4m x 5m rig mats
1.25m w x 12.5m l c/w 2 sets hinged pipe catwalk racks

Safety equipment :
4 - 14kg dry chemical fire extinguishers
4 self-contained scott air pack breathing apparatuses c/w 2 spare bottles
LEL monitor & 6 personal gas detector monitors
Safety and directional signs
Electrical ground bonding equipment
Basket stretcher c/w spine board, rescue slings & blankets
Crown saver
2 self-retracting life lines

BOP equipment :
Class III
Shaffer 152mm X 35mpa, LWS double gate & shaffer spherical
Wagner 3 accumulator station - 250 L 21mpa c/w operators controls &
N2 backup mounted in skidded combination building
2 -73mm - 35mpa safety valves
89mm rod BOP
152mm kill spool X 21mpa c/w 50mm wing valve
76mm x 21 mpa swab lubricator c/w jars & tool trap
76mm X 20mpa swabbing valve

Pump :
Skidded heated building
National JWS-340 triplex 102mm plungers X 127mm stroke
John Deer Model 6125H 12.5 L 350 hp engine
Eaton 10 speed transmission
Mission Magnum 127mm X 152mm charge pump
6 – 50mm X 35mpa manifold

Mud tank :
38m3 two compartment mud tank c/w stairs, railings, mix hopper, mud guns,
settling trough, steam coil, lighting & wind flag
120m X 50mm - 35mpa line pipe
12m X 10mm suction hose
External gauge

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


Land Drilling Rigs

---------------------------------------------------------------------------------------------------------
Search words (for official use only) - 
Ideco H30 Double Workover Rig For Sale
Workover Land Rigs in USA
Used 3000m Ideco H30 Double Workover Rig for Sale
Land Workover Rigs For Sale
Workover Rig for sale
Used American Workover Rigs
Ideco H30 Double (3000m) for sale

-----------------------------------------------------------------------------------------------------------

 
Skytop RR 400 Double - 4200m Workover Rig
Worldoils Marketplace
Skytop RR 400 Double - 4200m Workover Rig

Worldrigs ID: WR638

Skytop RR 400 Double - 4200m - Used Workover Rig - For Sale
Workover Rigs For Sale
4200m Used Workover Rigs For Sale

Skytop RR400-H1-4210A-38
Self-propelled, double drum,back-in
Rated capacity at 4,200 m w/73 mm tubing
Engine - detroit diesel 8V-92
(268 kW/360 hp)
Transmission - allison CLT 5860 - 6 speed
Main drum brakes - 25.4 cm x 106.7cm
Hydromatic brakes –
Parmac 122 w/1,500 l fluid capacity
Sand line brakes - 20.3 cm x 96.5 cm
Mast - skytop 107-180 X f rated 80,000 daN w/six lines
Racking capacity - 4,200 m – 73 mm double tubing
4,400 m - 19 mm triple rods
Travel blocks - McKissick 73A 100 ton c/w spring
Lights - vapour - proof incandescent
& quartz floods
Drilling line - 25.4 mm x 518 m wire rope
Sand line - 14 mm x 3,700 m wire rope
Weight indicator

Combination :
3.05 m x 12.2 m steel building
3.05 m x 4.8 m change house
3.05 m x 4.6 m tool house
3.05 m x 2.7 m generator house
55 kW - Isuzu diesel generator

Handling equipment :
Foster 58 - 93 tubing tongs c/w air back-up
Cavins model C power air slips
BJ elevators
Standard equipment - 60.3 mm & 73 mm EUE tubing
19 mm - 25 mm sucker rods
2 - 2.4 m x 13.7 m rig mats
Catwalk w/2 sets of pipe racks

Safety equipment :
4 - 14 kg dry chemical fire extinguishers
2 - self-contained breathing apparatus w/spare cylinder

Gas detector
Safety & directional signs
Electrical ground bonding equipment
1 stretcher
Crown saver
Pipe ram saver
2 self retracting lifelines

BOP equipment :
AEUB class III BOP
152 mm - 35,000 kpa shaffer spherical
152 mm - 35,000 kpa shaffer LWS with valve
Rucker - 340 l - 21,000 kpa accumulator w/3 station controls
& nitrogen back-up system
Hoses, remote station
73 mm EUE - 35,000 kpa tubing safety valve
89 mm rod BOP c/w handles
HD hydraulic oil saver
76 mm x 9.1 m swab lubricator w/jars & tool trap
76 mm swabbing valve - 21,000 kpa

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


Land Drilling Rigs

---------------------------------------------------------------------------------------------------------
Search words(for official use only) - 
Skytop RR 400 Double - 4200m Used Workover Rig for sale
Used American Workover Rigs
Workover Land Rigs in USA
Used 4200m Skytop RR 400 Double Workover Rig for Sale
Land Workover Rigs For Sale
Workover Rig for sale
Skytop RR 400 Double (4200m) for sale
-----------------------------------------------------------------------------------------------------------

 

SRE 600 Double - 4200m Workover Rig
Worldoils Marketplace
SRE 600 Double - 4200m Workover Rig

Worldrigs ID: WR639

Workover Rigs For Sale
SRE 600 Double - 4200m - Used Workover Rig - For Sale
4200m Used Workover Rigs For Sale

SRE-600 Model 4210 3808 drum size
Self propelled, double drum, back in & 5 axel carrier Rated capacity of
4200m – 73mm tubing DDEC series 60 12.5 L 450 hp engine Allison
CLT5860 6 speed transmission 25.4 X 101.6 c/w double 24” eaton main
drum brake assist 101” cobalt air actuated sand line brakes

SRE 107-210 - 32.6m rated 95dNa stung 6 lines mast 4200m of 73mm
tubing racking capacity Ideco shorty 110 ton block hook 3 X 61cm sheaves
& 25.4mm drill line Vapor proof florescent & sodium lights 25.4 mm X 300m
drilling line 14mm X 3400 m sand line Hydraulic martin decker clipper weight
indicator Dual winches

Combination
3 compartment steel skidded building
3.5m w X 11.6M l
John deer 75 kW generator

Handling equipment
Foster model 58-93R tubing tongs
Cavins advance model C air slips
BJ-90-TA-100 ton X 73mm & BJ-90-TA-65 ton X 60.3mm elevator
73mm & 60.3mm standard tubing sizes
19mm – 25mm rod sizes
2 - 2.4m w X 13.7m l & 1 – 2.4m w X 13.7m l rig mats
2.4m w X 12.5m l c/w 2 sets tumble catwalk racks

Safety equipment

4 – 14kg dry chemical fire extinguishers
4 self-contained scott air pack breathing apparatuses c/w 2 spare bottles
LEL monitor & 6 personal monitors gas detector Safety and directional signs
Electrical ground bonding equipment
Basket stretcher c/w spine board, rescue slings and blankets Crown
saver 2 self-retracting life lines

BOP equipment

Class III Shaffer 152mm X 35mpa LWS double gate & shaffer spherical Oilco 4
accumulator station 250 L 21mpa c/w operators controls and N2 backup
mounted in skidded combination building 2 -73mm X 35mpa safety valves
89mm rod BOP Kill spool 152mm X 21mpa c/w 50mm X 35mpa wing valve 76mm
X 9m swab lubricator c/w sinker bars & tool trap 76mm X 21mpa swabbing valve

Pump
Skidded heated steel building National JWS340 tripleX 102mm plungers X
127mm stroke John deer 6125H 12.5 L 350 hp engine Eaton 10 speed transmission
Mission magnum 127mm X 152mm charge pump 6 – 50mm X 35mpa manifold

Mud tank
38m3 two compartment mud tanks c/w stairs railings, mix hopper, mud
guns, settling trough, steam coil, lighting & wind flag 120m X 50mm X 35mpa line
pipe and suction hose

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need, please send
us an email to mail@worldoils.com stating your requirements and we shall find it
for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


Land Drilling Rigs

---------------------------------------------------------------------------------------------------------
Search words (for official use only) -
Workover Rigs For Sale
Used 4200m SRE 600 Double Workover Rig for Sale
SRE 600 Double - 4200m Used Workover Rig for sale
Used American Workover Rigs Workover Land Rigs in USA
Workover Rig for sale
RE 600 Double (4200m) for sale

-----------------------------------------------------------------------------------------------------------
 
Ideco H35 KD Double (4200) - Used Workover Rig for sale
Worldoils Marketplace
Ideco H35 KD Double (4200) - Used Workover Rig for sale

Worldrigs ID: WR633

Ideco H35 KD Double (4200) - Used Workover Rig for sale
Workover Rig for sale
Ideco H35 KD Double (4200) for sale

General
Ideco H-35 KD 4210-38
Self-propelled double drum back-in Rated capacity at 3,400m w/ 73mm tubing
Engine - Detroit Diesel 8V-92TA (357KW/480hp)
Transmission - Allison CLT 5860 - 6 speed
Main drum brakes - 25.4cm x 106.7cm

Hydromatic brakes - Parmac 122 w/1,500L fluid capacity
Sand line brakes - 20.3cm x 96.5cm
Mast - Ideco 102-212 rated 94,340daN w/six lines
Racking capacity - 3,400m - 73mm
Double tubing 4,000m - 19mm triple rods

Travel blocks - McKissick 73A - 100 ton c/w spring
Lights - vapour-proof fluorescent & quartz floods
Drilling Line - 25.4mm x 518m wire rope 19mm - 25mm sucker rods
Sand line - 12.7mm x 3,700m wire rope
Weight indicator

Combination
2.74m x 12m change house/tool house
40 KW - Isuzu diesel generator

Handling Equipment
Gill model 500 tubing tongs c/w air back-up
Cavins model C power air slips
King Oil Tool elevators
Standard equipment - 60.3mm & 73mm EUE tubing

19mm - 25mm sucker rods
2 - 2.4m x 12.1m rig mats
Catwalk w/2 sets of pipe racks

Safety Equipment
4 - 14kg dry chemical fire extinguishers
2 - self-contained breathing apparatus w/spare cylinder
Gas detector
Safety & directional signs
Electrical ground bonding equipment
1 stretcher

Crown saver
Pipe ram saver
2 self retracting life lines

BOP Equipment
AEUB Class III BOP
152mm - 35,000 kpa Shaffer Spherical
152mm - 35,000 kpa Shaffer LWS with valve
NL Shaffer - 180 L - 21,000 kpa accumulator w/3 station controls & nitrogen back-up system
Hoses, remote station

73mm EUE - 35,000 kpa tubing safety valve
89mm rod BOP c/w handles
HD hydraulic oil saver
76mm x 9.1m swab lubricator w/ jars & tool trap
76mm swabbing valve - 21,000 kpa

Pump
Ellis Williams - model 440 - 102mm plungers x 152mm stroke 35,000 kpa
Engine - Detroit Diesel 8V-71 (268KW/360hp)
Transmission - Spicer - 5 speed
Mission 76mm x 50mm charge pump
Seven-valve reverse circulating manifold
Enclosed in steel building

Mud Tank
32m3 c/w mud guns & hopper
90m of 50mm line pipe & 12m of 101mm suction hose
Circulation degasser

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


Land Drilling Rigs

---------------------------------------------------------------------------------------------------------
Search words (for official use only) - 
Ideco H35 KD Double (4200) - Used Workover Rig for sale
Workover Rig for sale
Used American Workover Rigs
Workover Land Rigs in USA
Used Ideco H35 KD Double (4200) Workover Rig for Sale
Land Workover Rigs For Sale
Ideco H35 KD Double (4200) for sale

-----------------------------------------------------------------------------------------------------------

 
Workover Rig For Sale - BW Rig Alco Double (4200m) - Used
Worldoils Marketplace
Workover Rig For Sale - BW Rig Alco Double (4200m) - Used

Worldrigs ID: WR632

BW Rig Alco Double Used Workover Rig for Sale
Used American Workover Rigs for sale
Workover Rig For Sale - BW Rig Alco Double (4200m)

BW Rig Alco Double
Five axle, self-propelled, double drum, back in rig
4200 m x 73 mm tubing
12.7 liter 60 series Detroit Diesel rated at 425 hp engine
Allison CLBT-5860 Five speed transmission
25.4 cm x 106.7 cm main drum brakes
c/w 60.9 cm model 124 Eaton brakes
20.3 cm x 106.7 cm sand line brakes
31.7 m Cheyenne Model 104 mast w/106,800 DaN and 8 lines
4200 m x 73 mm tubing and 3000 m sucker rods
Sowa 100 ton model 9944 travel blocks
Fluorescent lighting
1” drilling line
4200 m x 12.7 mm swedge sand line
Hydraulic weight indicator
Dual winches

Combination
11.0 m X 3.4 m skid change house
6.6 m X 3.36 m tool-house accumulator portion
John Deere 55 KW generator

Handling Equipment
58-93R Foster tubing tongs
Cavins TC 101 air slips
2 - BJ and 1 – AOT elevators
60.3 mm, 73 mm & 88.9 mm standard tubing sizes
5/8” and 1” rod sizes
2 – 8 x 42 and 2 – 6 x 16 rig mats
Skid cat walk & 4 tumble racks

Safety Equipment
4 - 18 KG fire extinguishers
4 – Scott SCBA self-contained breathing apparatuses
Industrial Scientific LTX312gas detector
Safety and directional signs
Electrical Ground Bonding Equipment
Stretcher
Crown Saver
60.3 mm, 73 mm & 88.9 mm pipe ram
2 self-retracting life lines

BOP Equipment
Class III
Dreco RS, double-gate with a pressure rating of 35 Mpa and Townsend, annular with a pressure rating of 35 Mpa
88 gallons (333 liters) Oilco accumulator w/ 3 control and remote at drillers console
73 mm safety valves with a pressure rating of 35 Mpa
76.2 mm rod BOP
76.2 mm x 6 m swab lubricator c/w tool trap
73 mm gate valve

Pump
Skid pump
10.16 cm x12.7 mm National JWS-300L with a pressure rating of 35 Mpa
Detroit Diesel 8V92, 300 hp engine
5 speed manual transmission
3 x 2 x 13Mission Magnum I charger pump
7 valve manifold with a pressure rating of 35 Mpa

Mud Tank
38 M3 mud tanks c/w mud guns, mixing hopper and settling trough
20 - 5.08 cm X 6 m line pipe and suction hose
Poor boy degasser

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


Land Drilling Rigs

---------------------------------------------------------------------------------------------------------
Search words(for official use only) -  
BW Rig Alco Double Used Workover Rig for Sale
Used American Workover Rigs
Workover Rigs in USA
Workover Land Rigs in USA
Land Workover Rigs For Sale
Workover Rig For Sale - BW Rig Alco Double (4200m) - Used
Used Workover Rigs for sale
BW Alco Double Rig - Used For Sale
-------------------------------------------------------------------------------------------------------

 

Land Rigs for sale in Indonesia
Worldoils Marketplace
Land Rigs for sale in Indonesia

Worldrigs ID: WR262

National T45 Land Rig For Sale in Indonesia

We have for sale a complete mechanical rig in good working condition will current Silo certification. 
Located in Indonesia. 

The rig has all tools tubulars and camp and related plant and has just finished work in last few weeks and is presently stacked.
Please ask for full intentory.
More pictures on request. 

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


Land Drilling Rigs


---------------------------------------------------------------------------------------------------
Search Words(for official use only) :
National T45 Land Rig For Sale
Drilling Rig For Sale in Indonesia
Used Drilling Rig for Sale
Used land rig in Indonesia
Land Rigs for sale in Indonesia

---------------------------------------------------------------------------------------------------
 
Cabot 750 Mobile Carrier Rig - Used
Worldoils Marketplace
Cabot 750 Mobile Carrier Rig - Used

Worldrigs ID: WR495

Cabot 750 Mobile Carrier Rig for Sale
Used Cabot 750 Land Rig
Cabot 750 Refurbished Drilling Rig
Mobile Land Rig For Sale


Self propelled carrier specifications mechanical drive arrangement

Model 2042 drawworks specifications mechanical drive arrangement

Drawworks Horsepower Rating : 550-700
Drum Dia. x Length : 19 5/8" x 40"
Grooving-Counterbalanced LeBus : 1 1/8"
Brakes, Water Cooled (Dia. x Width) : 42" x 12"
Effective Brake Area : 3,050 Sq.Inches
Hoisting Speeds : 5 Forward, 1 Reverse
Rotary Speeds : 5 Forward, 1 Reverse
Parmac Brake : 202 or equivalent

Drum Clutch : PO 24" 2 Plate
Rotary Clutch : PO 18" 2 Plate
Brake Clutch : Positive Jaw
Drum Drive Chain : 1 1/2" Quad
Jackshaft Drive Chain : 1 1/4" Quad
Rotary Drive Chain : 1 1/2" Double
Brake Drive Chain : 1 1/4" Triple

Model 112-300 Mast Specifications
Type-Telescoping, Hydraulic Raised & Extended, Tilted
Clear Height (with 15' Floor) : 97'-0"
Leg Spread : 7'-6 1/2"
Mast Tilt : 2 3/4 degree
Hook Load Capacity (API Std. 4E) :
6 Lines 281,000#
8 Lines 300,000#

Crown (Std.) :
Fast Line & Dead Line Sheave : 1-36" & 1-30"
Cluster Sheaves : 4-30"
Racking Capacity :
Range 2 Doubles - 4 1/2" OD Drill Pipe, 6 1/2" OD. T.J  9,500'
4" OD Drill Pipe, 6 1/8" OD. T.J  10,000'
Wind Rating with Full Setback : 69mph (60Kts.)
Raising System : Two 3 Stage Double Acting Rams
Extending System : Two 1 Stage Single Acting Rams

Note : Four wind guys to crown and cross guys to racking board are recommended for wind stability.

Substructure Specifications*
Type-Cross-Type, Single Piece, Telescoping
Floor Height : 15'
Bottom of Rotary Beam Clearance : 12'-0"
Floor Size, Length x Width : 13'-8" x 26'-0"
Ground Overall Dimensions, Length x Width : 40'-0" x 12'-0"
Rotary Capacity : 350,000#
Setback Capacity : 200,000#
Total Simultaneously Capacity : 550,000#

*Optional Types Available
Carrier Model : C7-762-293
Wheelbase (from centerline of front triple to centerline of rear triple) : 293"
Type Frame (High strength steel) : 20 3/4" Fab.Channel

Type Suspension :
Front-Spring
Rear-Walking Beam
Third Axile Air

Front Axile : (3) DCB
Service Rating 66,000#

Rear Axile : Triple w/DP 480 P
Service Rating 68,000#

Standard Tires :
Front: 18.00 x 22.5  16 Ply Duplex
Rear : 10.00 x 20  12 Ply Nylon

Typical Rig Field Weights

Front : 57,100#
Rear : 61,800#
Total : 118,900#

Typical Power

Engines (HP @ RPM)

Note : Horsepowers shown are manufacturer's ratings at SAE Standard conditions
(85 degree fahrenheit and 500'altitude). Deduction must be made for fan,
compressors, and intake and exhaust system losses.

(2) DDA 8V-71N @ 304 HP each, Total 608 HP @ 2100 RPM.
(2) Catepillar 3406 @ 360 HP each. Total 720 HP @ 2100 RPM.
(2) DDA 8V-92N @ 360 HP each. Total 720 HP @ 2100 RPM.

5,000'-7,500' Nominal depth range, 4 1/2" D.P., Doubles
700 Horepower. Mechanical Drive : Two engines with torque converters
Electric Drive : one DC traction motor

The 750 Series Drilling Rig has proven itself to be fast moving reliable rig of simple
and rugged construction. It is available in the following forms: A self propelled mechanical 
drive rig; a split trailer mechanical drive rig; a split trailer electric drive rig.

As a self propelled mechanical drive rig, the Model 2042 drawworks, telescoping mast, 
oil bath chain case elevated ratary drive and two engine rig power are unitized into one 
self propelled rig load.

As a split trailer mechanical drive rig, the drawworks and two engine rig power are mounted 
on one trailer and the telescoping mast and oil bath chain case elevated rotary drive are
mounted on a second trailer. The two trailer design accomplishes package weight control 
where permit limits may cause problems.

As an electric rig, an electric drive drawworks group has been developed using one 700 HP 
traction motor for both single and double drum drawworks and for the rotary drive. 
The drawworks, motor and hydraulic power unit are mounted in one self propelled package.

Both of the rig arrangements above are combined with a rig base and selection of single 
piece or multiple piece substractions to complete the rig. This rig in conjuction with single
load mud pump pacakages with independent power results in an extremely flexible arrangement.

Mechanical Drive Arrangement

Power - Two engines (any make) totaling upto 700 HP at 2100 RPM. The side-by-side 
engines are high mounted for easy accessibility and maintenance. Either or both engines 
can be used for hoisting, rotary or roading operations.

Torque Converters  - Two torque converters individually matched to engines provide 
maximum output power for single or two engine operation at full load or part load. Lockup 
feature in each converter for maximum efficiency.

Transmissions - Allision HT 750 DR,unitized with torque converters. Five forward speeds. 
Finger tip selection at driller's console with full load shift capability allows maximum flexibility 
of power application to job at hand.

Compound - v-Type roller chain compound in pressure lubricated oil bath case. Each engine 
can be disconnected in compound. Integral gear tranfer chase for vehicle drive.

Drawworks - Model 2042 drawworks with 19 5/8" diameter drum barrel 40" long. 12" x 42" 
circulating water cooled brake rims with full Wrap, single point adjusted, fully equalized brake 
bands. The easy access outboard drum cluch generates 40,000# single line pull. 
Paramac 202 single rotor brake assist with positive action clutch.

Catworks - Hydraulic catworks, including breakout cylinder, spinning and make-up cylinder
and planeatary gear, self-locking handling winch for smooth, safer catheading operations.

Drawworks Drive - Heavy-duty propeller shaft through Model 600 right-angle gear box.

Rotary Drive - Propeller shaft via full air rotary clutch, heavy duty reverse gear box and oil bath 
roller chain elevated rotary drive unitized on back face of mast. Simple propeller shaft connection 
at rig-up and rig-down. Nominal max. rotary speed-300 RPM.
Nominal working table torque - 30,000 ft. lbs.

Carrier - Mechanical drive rig provided with six axle triple front, triple rear 134,000# capacity 
carrier. Designed to meet highway safety standards with necessary toughness for off highway 
operations.

Electric Drive Arrangement
The 750E Series rig is designed as an SCR electric powered rig. One GE 761 (or equivalent)
700HP traction motor provides power to both the drawworks and the rotary. The drawworks 
drive is a two speed high/low drum clutch arrangement. An optional sand drum assembly may 
be mounted in the drawworks group. The rotary drive is taken from the drawworks drive via a 
Model 600 right angle gear box. The full air rotary clutch is mounted on a right angle drive 
output shaft. A propeller shaft drive and oil bath roller chain elevated drive mounted on the 
back face of the mast complete the rotary drive.

Features common to both mechanical and electrical drive
Mast - 112'300,000# API-rated telescoping mast. Dual ram hydraulically raised and extended.
Tubular construcion offering maximum rigidity and capability to withstand abuse. Patented pawl
mechanism assuring positive transfer of load from upper to lower section. Deep mast sections 
for maximum torsional stability. Heavy-duty rigid racking board with side-mounted fingers provided
 with finger safety locks. Load guylines to engine end of carrier.

Trailer - The mechanical drive and electrical drive arrangement of the 750 Series rig are both 
available as trailer type rigs or split rig arrangement. 

Substructure - Choice of T-Type telescoping substructure with derrick base and rig base or 
stacked fixed height substructure with setback cross base and derrick cross base. 15' high structure. 
Either type provides wind guy anchorage eliminating external wind guy anchors.

Hydraulic Power - 35 GPM 2500 psi max. pressure system. Provided by either of two pumps,
 one belt driven from front of each engine.

Power Reserve Line Pool  - On split trailer versions only  of the 750 Series rig, a hydraulic 
powered reserve line spool is provided on the mast trailer.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


Land Drilling Rigs

--------------------------------------------------------------------------------
Search words(for official use only) -  
Cabot 750 Mobile Carrier Rig for Sale
Used Mobile Drilling Rigs For Sale
American Cabot Drilling Rigs for sale
American Used Land Rigs for sale
Cabot 750 Land Drilling Rig for sale
Used Land Rigs for sale
Used Cabot Mobile Drilling Land Rig
Refurbished Land Rigs For Sale

--------------------------------------------------------------------------------

 
New UMD 110 Land Drilling Rig - For Sale
Worldoils Marketplace
New UMD 110 Land Drilling Rig - For Sale

Worldrigs ID: WR593

UMD 110 Land Drilling Rig - For Sale in Europe
New Semi Mobile Drilling Rig For Sale - UMD 110


Main Technical Specifications

Engine type : C 13 ACERT
Nominal engine power hp (kW) : 415 (309)
Transmission : Allison 4500 OFS
Nominal hoisting capacity metric ton (lbs) : 110 (242000)
Workover  depht (m) drill pipe (2 7/8”) : 4500
Drilling depht (m) (4 1/2“) : 1500
Rope diameter (mm) : 26
Mast height (m) : 32
Drilling floor height (m) : 5
Travelling system : 4x3
Working pressure (mpa) : 0, 65-0, 8

Technical Specifications

Drawworks
Main Drum -
Input power (hp) : 450
Barrel size : D18”  W38”
Brake rim size : D44” W12”
Wire line size : 1 ” (26 mm)
Drum speed : 6F/1R
Brake cooling : Water circulation
Brake system : Band / disc / auxiliary (Parmac SSR-28 hydro-brake)
Lubrication : Automatic or manual
Drum clutch : Air flex type
Chain drives :
All chains are fully encloded for oil bath lubrication ensuring longer life
and cleaner operation

Sand Line Drum -
Barrel size : D13”  W37“
Brake rim size : D44” W9½”
Spooling capacity : 16114’
Sand line wire size : 9/16” (14 mm) - 5/8” (16 mm)

Rig Power & Transmission

Diesel engine(s) : Caterpillar C-13 ACERT, 415Hp, 2.100rpm
Transmission(s) : Allison OFS 4500 series with torque converter
Right angle gear box : Min 500 HP gear box in oil bath gear case
Compound box :
Twin engine drive through transmission includes disconnect clutches at
compound shaft for engines

Mast  & Crown Block
Mast -
Mast complete set : Design and conform to APİ 4F specification
Mast height : 32m  ( 118ft  )
Max. static hook load capacity : 1.100kN  ( 250.000lbs )
Racking capacity : 1.500m ( 4 ½’’ DP,19.2m double )
Height of the monkey board : 17.2m ( from floor )
Accessories : Standpipe , exproof  lightning....etc
Mast type : Hydraulic telescopic

Crown Block -
Crown block complete set : Design and conform to APİ 4F  specification
Max. hook load : 1.100kN (250.000lbs )
Number of sheaves : (2)  Main + (1) fast line  +  (1) deadline +  (1) sandline
+  (2) sheaves for service winch

Sheaves OD :
Fast Lines Ø32" ( Ø813mm )
Dead Line Ø28" ( Ø711mm )
Sand Line Ø28" ( Ø711mm )

Dia. of sheave’s grove :
Fast & Dead Lines Ø1" ( Ø26mm )
Sand & Winch Lines  Ø 5/8" ( Ø16mm )

Traveling Block  & Hook
Traveling block : 1.100kN Max. statik load, 3 sheaves, Ø32’’ sheaves
dia. Ø1’’  (Ø26mm ) groove dia.

Hook : 1.100kN Max. statik load, 3tons spring stroke.
Elevator link(s) : 1.100kN rated load capacity.

Swivel
Static hook load, ton : 110
Working pressure, psi : 5,000
Maximum speed, rpm : 300
Coupling thread to stem : 4-1/2" Reg LH
Coupling thread to kelly : 6-5/8" Reg LH
Stem İ.D. : 2-1/2"

Trailer  & Other  Systems
Trailer :
Three axles semi mobile trailer, 12 wheels, fabricated high tensile steel vehicle
frame reinforced at points of greatest stress. Highway equipment and cab included.
İnstalled fuel tank.

Tool box. Auxilary drill line drum, all axles dressed brake, folding walkwayss on
both sides of trailer.

Hydraulic jacks : Four hydraulic operated leveling jacks
Hydraulic service winch : 5 metric tons drum pull capacity
Deadline anchor : Deadline anchor attached directly to trailer frame
Air system : Compressor (engine drive), air tank, relief valves, air dryer, gauges, all clutches

Hydraulic system :
Hydraulic pump, system operate hydraulic cylinders on mast, hydraulic jacks,
hydraulic pipe tong, and hyraulic winch. Control valves, hydraulic oil tank, filters, pipes,
hydraulic and air valve connections, fittings.

Electrical lighting system : All the electrical equipments on the mast, and substructure
are ex-proof type

İnstrumentation : Driller control panel, weight indicator, gauges, air valves, cables , hoses,
fittings, transducers, paint

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


Land Drilling Rig


----------------------------------------------------------------------
Search words(for official use only) :
UMD 110 Drilling Rig For Sale in Europe
New UMD 110 Semi Mobile Drilling Rig For Sale
New Semi Mobile Drilling Rigs
Land Drilling Rigs For Sale
New Land Drilling Rig

---------------------------------------------------------------------
New UMD 90 Land Drilling Rig - For Sale
Worldoils Marketplace
New UMD 90 Land Drilling Rig - For Sale

Worldrigs ID: WR592

UMD 90 Land Drilling Rig - For Sale in Europe
New Semi Mobile Drilling Rig For Sale - UMD 90


Main Technical Specifications
Engine type : C 13 ACERT
Nominal engine power hp (kW) : 415 (309)
Transmission : Allison 4500 OFS
Nominal hoisting capacity metric ton (lbs) : 90 (198000)
Workover  depht (m) drill pipe (2 7/8”) : 4500
Drilling depht (m) (4 1/2“) : 1500
Rope diameter (mm) : 26
Mast height (m) : 32
Drilling floor height (m) : 5
Travelling system : 4x3
Working pressure (mpa) : 0, 65-0, 8

Technical Specifications
Drawworks
Main Drum -
Input power (hp) : 450
Barrel size : D18”  W38”
Brake rim size : D44” W12”
Wire line size : 1 ” (26 mm)
Drum speed : 6F/1R
Brake cooling : Water circulation
Brake system : Band / disc / auxiliary (Parmac SSR-28 hydro-brake)
Chain drives :
All chains are fully encloded for oil bath lubrication ensuring longer life
and cleaner operation

Lubrication :  Automatic or manual
Drum clutch : Air flex type

Sand Line Drum -
Barrel size : D13”  W37“
Brake rim size : D44” W9½”
Spooling capacity : 16114’
Sand line wire size : 9/16” (14 mm) - 5/8” (16 mm)

Rig Power & Transmission

Diesel engine(s) : Caterpillar C-13 ACERT, 415Hp, 2.100rpm
Transmission(s) : Allison OFS 4500 series with torque converter
Right angle gear box : Min 500 hp gear box in oil bath gear case
Compound box :
Twin engine drive through transmission includes disconnect clutches at
compound shaft for engines

Mast  & Crown Block
Mast -
Mast complete set : Design and conform to APİ 4F specification
Mast height : 32m  ( 118ft  )
Max. static hook load capacity : 900kN  ( 198.000lbs )
Racking capacity : 1.500m ( 4 ½’’ DP,19.2m double )
Height of the monkey board : 17.2m ( from floor )
Accessories : Standpipe , exproof  lightning....etc
Mast type : Hydraulic telescopic

Crown Block -
Crown block complete set : Design and conform to APİ 4F  specification
Max. hook load : 900kN (198.000lbs )
Number of sheaves : (2)  Main + (1) fast line  +  (1) deadline +  (1) sandline
+  (2) sheaves for service winch

Sheaves OD :
Fast Lines Ø32" ( Ø813mm )
Dead Line Ø28" ( Ø711mm )
Sand Line Ø28" ( Ø711mm )

Dia. of sheave’s grove :
Fast & Dead Lines Ø1" ( Ø26mm )
Sand & Winch Lines  Ø 5/8" ( Ø16mm )

Traveling Block  & Hook
Traveling block : 900kN Max. statik load, 3 sheaves, Ø32’’ sheaves
dia. Ø1’’  (Ø26mm ) groove dia.

Hook : 900kN Max. statik load, 3tons spring stroke
Elevator link(s) : 900kN rated load capacity.

Swivel
Static hook load, ton : 90
Working pressure, psi : 5,000
Maximum speed, rpm : 300
Coupling thread to stem : 4-1/2" Reg LH
Coupling thread to kelly : 6-5/8" Reg LH
Stem İ.D. : 2-1/2"

Trailer  & Other Systems

Trailer :
Three axles semi mobile trailer, 12 wheels, fabricated high tensile steel vehicle
frame reinforced at points of greatest stress. Highway equipment and cab included.
Installed fuel tank. Tool box. Auxilary drill line drum, all axles dressed brake, folding
walkwayss on both sides of trailer.

Hydraulic jacks : Four hydraulic operated leveling jacks
Hydraulic service winch : 5 metric tons drum pull capacity
Deadline anchor : Deadline anchor attached directly to trailer frame

Hydraulic system :
Hydraulic pump, system operate hydraulic cylinders on mast, hydraulic jacks, hydraulic
pipe tong, and hyraulic winch. Control valves, hydraulic oil tank, filters, pipes, hydraulic
and air valve connections, fittings.

Air system :
Compressor (engine drive), air tank, relief valves, air dryer, gauges, all clutches

Electrical lighting system :
All the electrical equipments on the mast, and substructure are ex-proof type

Instrumentation :
Driller control panel, weight indicator, gauges, air valves, cables, hoses, fittings, transducers,
paint

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


Land Rig


-------------------------------------------------------------------
Search words(for official use only) :
UMD 90 Land Drilling RigRig For Sale
New Semi Mobile Drilling Rigs
Land Drilling Rigs For Sale
New Land Drilling Rig
New UMD 90 Drilling Rig For Sale in Europe

-------------------------------------------------------------------
 
Chinese New Land Drilling Rig - Electric VFD
Worldoils Marketplace
Chinese New Land Drilling Rig - Electric VFD

Worldrigs ID: WR506

Electric Drilling Rig for Sale
Chinese New Land Drilling Rig - Electric VFD
2700hp VFD Land Drilling Rig

General Description :
Built : 2007
Rig rated dept : 5,000m - 7,000m for nominal drilling DP 5"
Travelling system : 6 x 7 (sheaves)
Available height of derrick : 150 ft

Rig floor dimension / height of drilling floor:
40 ft x 42 ft / 30 ft

Opening diameter of rotary table :
37 1/2 inch

Rated input power of drawworks :
2720 hp or 2,000kW

Capacity of mud pump : 1600hp or 1193 kW
Power transfer type : AC, VFD
Accommodation : 150 persons

Drilling Equipment :
Mast :
Model JJ 450/45-K11 : Type II consist of five sections, 150 ft dear height
Top span (Front x side) 2.2m x 2.2m
Bottom span (Front x side) 9m x 2.7m
Max. hook load 450t or 1,210,000 lbs

Racking Platform :
Designed for 03 different heights : 24.5m, 25.5m, 26.5m away from
drill floor surface.

Racking Board :
7000m (5" DP/HWDP 250 stands including DC)
10 stands of : 6" DC
10 stands of : 9 1/2" DC

Drawworks :
2720 hp or 2,000 kW
Driven by two AC VF motor
Max pull fast line : 485 kn
Wire rope : 38mm dia.
Air cool hydraulic disc brake : PS80

Crown Block :
Model : TC450-7
Max hook load : 450 kn (450t)
OD of sheave : 1524mm
Diameter of drilling line : 38mm
No. of sheave : 7
No. of sand line sheave : 1
Diameter of sand line : 14.5mm

Travelling Block :
Model : YC450
Max static load : 4500kn (450t)
OD of sheave : 1524mm
No. of sheave : 6

Rotary Table :
Model : ZP375
Table opening diameter : 37 1/2"
Max static load : 5850kn
Max speed : 300 rpm
Rate power : 600 Volt
Gear ratio : 3.56

Kelly : 
Hex kelly / 5 1/4", 3 1/2"

Topdrive :
Model : NOV/TDS-11SA/Electrical/800hp
Hoisting capacity : 500 ton
Output torque continuous : 37,500 ft.lbs (800 hp)
Tool torque (intermittent @ stall) : 55,000 ft.lbs
Max speed : 228 rpm
Drilling motor : AC 575 VAC (2 x 400 hp)
Make up torque : 47,000 ft.lbs
Break out torque : 55,000 ft.lbs

Mud Pumps :
Model : HHF 1600
Input power : 1600 hp (1193 kW)
Max cylinder diameter : 7"
Length of stroke : 12"
Rate No. of stroke : 120 spm
Three triplex single acting piston, HHF - 1600

Solid Control :
Shale shaker : FCL-2000-3/rated 525 gpm
De-sander : DSV-10-3/rated 1280 gpm
De-silter : S-416-S/rated 1280 gpm
Degasser : FLO 1200 /4 cbm/m
Mud cleaner : FLC-2000

BOP's Stack :
Shaffer 21 1/4" BOP 2,000 wp including:
01 Annular 2,000 wp
01 double Ram 2,000 wp

Shaffer 13 5/8" BOP 10,000 wp including:
01 Annular 5,000 wp
01 Double Ram 10,000 wp
01 Single Ram 10,000 wp
Comply with lifting BOP swl 2 x 30 ton

Trip Pump :
Model : SB3" x 4" - 11
No. of pump : 2 set
Rate capacity : 81 cbm/h

BOP Control System :
Type : FKQ 960-7
Accumulator : 24 Pcs, 11 gallons/bottle
Including : 01 triplex pump and 02 air pumps
Working pressure : 3,000 psi
Total : 264 gallons
Guanchau Petroleum China/ FKQ 960-7, 3000 psi

Choke Line :
Make : Shaffer/Cameron valves
Working pressure : 3,000 PSI - 10,000 psi
Working medium : Oil (gas), Mud, H2S, CO2
Main bore size : 3 1/16", 4 1/16"
According with API 6A, 16C

Iron Roughneck ST-80 :
Model : ST-80
Make : Varco/NOV
Connection range OD : 4 1/4" - 8 1/2"
Handle drill pipe OD : 3 1/2" - 6 5/8"
Spin speed : 90 rpm
Max hydraulic pressure : 2,500 psi
Make up torque max : 60,000 ft.lbs
Break out torque max. 80,000 ft.lbs
Turn able type

Storage capacity :
Diesel Fuel :
No. of Tank : 2 tanks/80 cbm/tank
Total : 160 cbm
Transfer pump : 2.2 kW

Drilling water :
No. of Tank : 2 tanks/80 cbm/tank
Total : 160 cbm
Transfer pump : 7.5 kW

Mud tank : 
2,500 bbls

Power Equipment :
Generator :
Type : SR4B
No. of Gen. : 04 set (01 back up)
Capacity : 1714 kva
Rate voltage : 600 vac

AC distribution / transformer :
ABB/AC S800, transformer SUNTEN/SC B9-1600, 600vac/380vac

Emergency generator :
Diesel/380V/50HZ/400 kva/ CAT 3406-01

Diesel :
4 set CAT 3512B DITA

Power Slip PS-21 :
Make : Varco/NOV
Working pressure max. : 2,500 psi
Pipe size : 2 3/8" - 14"
Pipe weight : 500 ton

Fits into : 37 1/2" Varco/NOV RT
Max. back up torque : 45,000 ft.lbs
Max. back up torque on locks : 120,000 ft.lbs

Cranes :
Type : QY50B truck crane
Max. Total rated lifting load : 50 tons

Forklift :
Rated Hoist Capacity : 12 T

Subject to prior sale

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


Land Drilling Rigs

----------------------------------------------------------------
Search words (for official use only) - 
Electric Drilling Rig for Sale
New Chinese Made Land Rig
Chinese new VFD Drilling Rig
2700hp Drilling Rig
2700hp Electric Land Drilling Rig
New Chinese Drilling Rig

----------------------------------------------------------------

 
1500HP Electric Land Rig
Worldoils Marketplace
1500HP Electric Land Rig

Worldrigs ID: WR505

Electric Drilling Rig for Sale
1500HP Chinese Electric Land Drilling Rig - New
Ready New 1500HP Drilling Rig

A. General
1. Type and Class : 
Electrical Drive, AC-VFD-AC

2. Drilling Capactiy
16400ft with 4 1/2" Drill Pipe

3. Classification :
- API Q1 : Quality Control
- API 4F : Drilling and Well Servicing Structures
- API 8C / ISO 13535 : Drilling & Hoisting Equipment
- API 7 : Rotary Drill Stem Elements
- API 7-1 / ISO 10424-1 : Rotary Drill Stem Elements
- API 7F : Oilfield Chain and Sprockets
- API 7K : Drilling and Wells Servicing equipment
- API 9A / ISO 10425 : Wire Rope
- API RP 9B : Application, care and use of Wire Rope for Oilfield Service
- IEC 60529 : Degrees of protection provided by enclosures (IP Code)
- IEC 60947-1 : Low Voltage switchgear and Control Gear
- IEC 60079-1 : Equipment Protection by Flamproof Enclosures
- IEC 60439-1 : Low Voltage Switchgear and Control Gear Assemblies
- IEC 62271-102 : High Voltage Switchgear and Control Gear
- IEC 60034-1 : Rotating Eelctrical Machines

B. Hoisting Equipment
1. Drawworks
: 1 : Baoji : JC-50D
- Type : Electric, stepless speed, adjustment ; Single driven
shaft chain transmission, single drum, with lebus groove
- Rating : 1500HP
Load Capacity : 1,000,000 lbs with 12 lines
Complete with :
- Brake : Hydraulic, Disc, water cooled : 1set : Beijing : PSZ75
- Auxialiary brake : Electromagnetic, c/w alarms for loss of cooling, high
temp, etc, water cooling : 1set  : Shanghai : DSW50
- Safety Device : Crown-o-matic
AC Motor : 1150 HP(830kw) : 2pecs : Yongji : YG
Driller console : includes eletric, hydraulic, gas control valves and
Siemens Plc; monitor TV, digital design : 1set : Shanghai
Drilling line : 1 3/8" 1200m : 1 rell : Xianyang
Hydraulic drill spool : use for 7500ft 1-3/8" wireline : 1 set
Automatic Feeder : integrated with drawworks : 1
Motor : 50HP(37kw) with brake

2. Mast : Jianxin
Cantilever Type : Four section ,Capacity 1,000,000 lbs : 1 : Jianxin : JJ450/45-K
- Hook Load : 1,000,000 lbs - 12 lines
- Clear Height Below Crown : 148ft : 148FT
- Casing Stabing Board : Adjustable, 20 feet stroke,Air powered : Lanzhou
- Adjustable Racking Board : Capacity 122 stands 5" Drill Pipe, plus 5 stands 8"
drill collar; adjustable 80ft, 83.6ft, 87ft. : Jianxin
Hydraulic Bumper device : - Air winch at racking platform : 1,100lbs : 1
Anti-drop & escape device : 2 sets
Climbing assistor : 2 sets
Mast transport frame : 8
Crane arm : 11,000 lbs
Air Winch : 110,000lbs 2
Hydraulic cathead 2
Hydraulic line cutter : 1
String line guider : 6
Crown block : load capacity : 500t : 1set : TC-450
- Crown Block Sheave for 9/16" sand line
- Crown Block sheave for drilling line, 7 sheaves
crane arm : 11000 lbs
- Fast Line & Dead Line Guide 

3. Rig Sub Structure : Jianxin : DZ450/10.5-S
- Self Elevating : 30' height clearance below rotary beams : Jianxin
- Size : 39' Long x 33 ft wide
- Casing Load  : 1,000,000 lbs
- Set back : 480,000 lbs
- BOP Handling System : Total Capacity 40 Tons, 2 x trolley beams,
2 x trolley, Hydraulic
- Self Elevating : 30' height clearance below rotary beams Jianxin
- Size : 39' Long x 33 ft wide
- Casing Load : 1,000,000 lbs
- Set back : 480,000 lbs
- BOP Handling System : Total Capacity 40 Tons, 2 x trolley beams,
2 x trolley, Hydraulic
Dead Line Anchor : JZG41
Traveling block support frame : 1
Catwalk : 2
Pipe rack : 8
Hydraulic hoist : 1 set
Channel for oil, gas water,power cable : 1 set
Mud Protection Basket : 1

4. Travelling Block : 1 : Lanzhou : YC-450
- Sheaves : 6*60", 1 3/8" Line
- Capacity : 1,000,000lbs

5 Hook Block : 1,000,000lbs : Lanzhou : DG-450

6 Mouse hole & rat hole : 1 ea

7 Cellar jet : Cellar cleaning pump

8 Elevate Link : 132"*500t,1pair 108*350t,1pair : 2 pairs

C. Drilling Equipment
1. Rotary Table : 1
: Gaoyou : ZP375
- Rotating Load Capacity : 644Tons(585mt)
- Size (Opening) : 37.5"
- Rotary Speed : 0 - 300 RPM
- Motor : 1088 HP (800kw)AC traction motor c/w Blower : 1 : Yongji YG
- Motor Drive Coupler : 1
- Complete with :
Independent Rotary Drive Skid
Motor Drive Coupling
Bushing
2-3/8" -8-5/8" bushing for 7” casing
9-5/8" -10-3/4" bushing for 9-5/8” casing
11-3/4" -13-3/8" bushing for 13-3/8" casing
22½" bushing for 20" casing
Locking Mechanism
Rotary Speed Indicator

2 Swivel :
Double function, includes pneumatic spinner : 1 Lanzhou : SL-450-2
- Capacity : 500 Tons dead load rating
- Complete with : Gooseneck & Quick Change Washpipe assembly
6 5/8" reg. L.H. Connections

3 Kelly : 2
- Type :
Hexagon, 5 1/4"x 1 jiont, 40 Feet and 3 1/2'' x 1 joint 40 Feet
C/w Scabbard and 6 5/8" Reg LH Box x 4 1/2" IF Pin
Main Bushing :
5-1/4", 3-1/2" roller bushing for Hex. kelly
DP Wipers for 5” & 3.1/2 ‘” sizes

4 Saver Sub : 6-1/2" OD WITH 4 1/2" IF Connection 6

5 Kelly Cock : Upper Kelly Valves- 6 5/8" Reg. LH Connections
10,000 psi : 1
Lower Kelly Valves- 10,000 psi : 1

6 Drilling Hose : 4" , 5000psi, one joint 19m and one joint 23m : 2

7 Tools on Rig Floor :
Hydraulic Catheads Make-up and Break-up : 2 : YM16
Hydraulic drill pipe spiner : For 3 1/2" and 5" DP : 1 set : ZQ100-203
Hydraulic Casing spiner : For 5.1/2”- 13.3/8” Casing Sizes : 1 set : TQ340-35
Integrated Hydrauliuc power station : Standard model, electric,
air cooled : 1 set

D Power Supply
1 VFD System :
Four Bay c/w switchgear, instrumentation,
transformers to control generators and AC and DC motors - 1set
4x 1400 type generator sets control cabinate
5 X VFD control cabinate Siemens (4 active+ 1standby)
PLC Logic control
MCC control 1 set
Protect Device 1set
Air Condition 1set
Top drive TDS 11SA Power supply
Control Panel : To control all electrical equipment - 1set
cable : all communication cable and power cable 1set
Diesel Engines : Turbocharged & After-cooled, rated 1040kw
Continuous, 1600KVA - 4 - CAT3512B
Generators : 1900 KVA, 600V, 60 Hz, 3 phase 4 SR4B
Note: All engines to be provided with automatic
shutdowns and flame arrestors

2 Auxiliary Gensets : 400KW, 400V, 60Hz, 3Phase 1 Volvo

3 Camp : Specs

E Circulating System
1 Mud pumps
 : F-1600 - 2 - Qingzhou/Baoji
Capacity : 1600 HP, 7 x 10", 690 GPM @ 3000 psi
Motors : 1088 HP AC Traction Motors c/w blowers - 4 - Yongji YG
Complete with : Pulsation Dampers , 5,000 psi
Vibration Damper, 4" x 12', 5,000 psi
SPM Meter, 0 - 2000 SPM
Pressure and Suction Manifold
Discharge Line, 4" # 5,000 psi
Pump Stroke Counter
Suction Line, 10" - 12" including expansion joint
Vibration Hose(s)
Liner and Piston Sets : 6 1/2", 6", 5 1/2"
The skid base
Centrifugal Charging Pump, 5" x 6", 40 HP Expl.
Proof Motor - 2
Belt Assembly - 4
Stand Pipe : 4" x 5000 psi complete with 4" x 62' and 4" x 68' Kelly
Hose with 5000 psi hammer unions, Double stand
pipe, Double H.P manifold on ground - 1 Set

2 Mud Tanks
Total Capacity : 2500 Barrel(active capacity) - Jianxin
Consisting Of :
Shaker Tank(500bbls) - 1
Intermediate Tank(500bbls) - 1
Suction tank(500bbls) - 1
Pre-Mix Tank(500bbls) 1
Mud reserve tank(500bbls) - 1
Trip tank, 50 Barrel, separate from system, callibrated
c/w float and callibration stand on rig floor - 1
water cooling tank - 1
drilling water tanks with motor - 2
Complete with : Roof, Walkways, Stairs and folding handrails - 1 lot
Cleanout Gates
Discharge Ditch connection from tank to tank
Centrifugal 6" x 8" , 100 HP, 1500 RPM Electric
Explosion Proof Motors - 4 sets
Centrifugal 3" x 4" , 25 HP, 1200 RPM Electric
Explosion Proof Motors, w type - 2 sets
Centrifugal 3" x 4" , 25 HP, 1800 RPM Electric
Explosion Proof Motors - 2 sets
Mud Mixing Pump, Centrifugal 5" x 6" x 14", 60 HP,
1500 RPM Electric Explosion Proof Motors - 2 sets
Mud Agitators with 36" Impellors driven by 15 HP
Electric Explosion proof Motors - 13 sets
Mud Mixing Hoppers
Pill Tank, 50 barrel capacity at Suction tank
connecting pipeline, mud gun,and other auxliaries

3 Shale shalers - 3 Jianxin
Linear Motion : Capacity 1200 GPM

4 Degasser : 1000 GPM c/w Vacuum Pump - 1

5 Desander : 1000 GPM, 10" *3Cones

6 Desilter : 16 ea 4" Cones, 1000 GPM

7 Mud Gas Separator : Poor-Boy, 30" x 18 feet, skid mounted
c/w all required fittings to choke manifold and 150 feet of vent
line properly stacked. - 1

8 Shearing Device : Polymer Shearing Device to mix polymer type mud
materials - 1

9 Ditch magnets : 4" Long 2

10 Mud house : Equipped with required testing equipment and
materials - 1set

F Blowout Preventer
1 Annular BOP :
Annular BOP, 13 5/8", 5,000 psi, H2S Trim - 1 set - FH35-35

2 Double Ram BOP : Double Rams, U type,13 5/8", 5,000 psic/w , H2S
Trim - 1 set - 2FZ35-35

3 Single Ram BOP- Single Ram, U type,13 5/8", 5,000 psi c/w 5" & 3
1/2" Blind rams - 1 set - FZ35-35

4 Rams : Blind Ram and Shear Ram for full range of DP, Tbg
and Casing for each BOP - 8 pecs

5 Accumulator : Working Pressure- 3000 psi, 220 gallons, seven/
eight Stations, Accumulator Hydraulic pump- electric
driven (2nos.), Air Driven (2 nos.) - 1 set FKDQ800-7
Complete with:  2 each Air Driven Pumps, 50:1 Ratio
Triplex pump, 25 HP Electric Explosion proof Motor
Master Remote Control
Remote Control Station c/w 30m x 12 jts control hose
Visual & Audible alarms for low volume, low pressure
and loss of power (electric & pneumatic) located at
drilling console and accumulator unit.
BOP Test unit : Portable -15,000 psi rating
Consisting of 2 air operated plunger pumps, etc.
Cup type Testers all sizes of casings- 13.3/8”, 9.5/8”

6 Choke and kill manifold : Three Wing
Adjustable Choke manifold : 4 1/16", Working Pressure- 10,000 psi
Two hydraulic operated Coke Valve & two manually
operated Choke Valves – 8pecs
Remote control Hydraulic Operated Choke - 1set
Manual Gate Valves : 2 9/16" 10pecs - China standard
Choke Line - 1 each 4 1/16" #10,000 psi manual and Hydraulic
Operated Valve - 2nos
Kill Line : 1 each 4 1/16"" #10,000 psi manual gate valve
- 1 each 4 1/16" #10,000 psi Check Valve
Inner control pipe ° 3 1/16" x 5m , 10,000 psi - 2nos
4 1/16" x 5m, 10,000 psi - 2nos

7 Drilling spool : 13-5/8” 10M x 13-5/8” 10M, for C&K manifold outlet
size 3 1/16"

8 Flare line : 100m

G Instrumentation
1 Indicator & Counter :
Rotary torque and RPM, weight indicator, tong torque,
circulating pressure gauge, pump stroke counter etc. - 1 set

2 Recorder : 8 pen for weight, torque, penetration rate, pump
pressure, rotary RPM - 1

3 PVT : Pit volume totalizer, single channel with audio and
visual alarms, four pit transmitters, totalizing relay,
gain & loss gauge - 1

H Utilities
1 Air compressor :
Capacity 375 CFM @ 125 psi, c/w accumulator, relief
valve, pressure gauge, air dryer, electric explosion
proof motor - 1
Air compressor 1MPa/5.6m3/min - 2 - Sullar LS-15-50LH
Air dryer 6m3/min - 1 - SRC-240
Air gas receiver 2m3 - 2
cooled starter - 1

2 Lights : Heavy Duty, explosion proof Fluorescent and Mercury
Vapor Lighting system covering all working areas of
the rig such as mast, sub-structure, rig floor, mud
tanks, walkways, generator house, workshop and
utility buildings inlcuding emergency lights at critical
stations such as SCR room, drilling console certified
for Class I, DIV 2 - 1 lot - Made in China
Dog House - 1
Tool Kit House - 1
Parts house - 1
Fuel tank - 500bbls/set, with filter and ex-p motors - 2

J Top Drive
Electrical,VFD drive, 500T Top drive - 1 - Beijing

Subject to prior sale

Price & terms : Please enquire using the email form below.


If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


Land Drilling Rigs

---------------------------------------------------------------------------------------
Search words(for official use only) - 
Electric  Drilling Rig For Sale
Electric 1500hp New Drilling Rig
Chinese Drilling Rigs
Ready Chinese Drilling Rigs
New Chinese Drilling Rigs
1500HP Land Rig For Immediate Sale
New Ready 1500hp Land Rig Chinese for sale
Chinese 1500HP New Rig For Sale
Ready Chinese made 1500 hp Drilling Rig

---------------------------------------------------------------------------------------

Taylor C550 - Land Workover Rig
Worldoils Marketplace
Taylor C550 - Land Workover Rig

Worldrigs ID: WR502

Taylor C550 Double Drum Workover Rig for Sale
Used Taylor C550 Workover Rig


Drawworks :
2007 Model Taylor C550 Double Drum Workover Rig with 16,000’ of 7/16”
swab line, with 475 HP Cat engines

Mast :
112’ Telescoping, 240,000# Capacity

Carrier :
5 Axle carrier unit

Substructure :
10’ Taylor hydraulic floor with working height of 8 to 12’ and a
substructure ragted at 300,000#

BOP :
11” x 3000# LWS Shaffer 5K double ram and annular

Water Tank :
200 BBL work tank

Handling System :
5K pump Iron

Handling Tools :
BJ tongs for tubing and sucker rode & Kavin Slips

Ancillary Equip :
Complete with pipe racks and cat walk

Office Capacity :
Complete with portable office for service companies, with enough
desk space for four people, I.e. directional personnel

Drilling Components

Mud Pump (Main) :
PZ7 Main 550 HP mud pump with Detroit series 60 enging and 5- speed transmission

Mud Pump (Aux) :
Auxillary mud pump system – with 24 hour programs a 1000 HP
pump complete with one (1) Swaco Mongoose, one (1) Swaco Desander &
one (1) Swaco Hopper with two (2) 300 bbl tanks are available

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please