Oil & Gas land drilling rigs for sale, Land drilling rigs for sale
Worldoils
Home Biofuels Oil & Gas Directory Glossary Research Training News Newsletter Events Oil & Gas Jobs Contact Water Well Rigs
Land Drilling Rigs Jackup Rigs LDPE Recycling Oilfield Container Camps Offshore Accommodation Steel Houses Mini Submarines Oil & Gas Equipment Marketplace
Home Biofuels Oil & Gas Directory Glossary Research Training News
Newsletter Events Oil & Gas Jobs Water Well Rigs Land Drilling Rigs
Jackup Rigs LDPE Recycling Oilfield Container Camps Crude Oil Price History
Steel Houses Mini Submarines Oil & Gas Equipment Marketplace Contact
Home Jackup Rigs LDPE Recycling
News Water Well Rigs Land Drilling Rigs
Mini Submarines Events Steel Houses
Oilfield Container Camps Oil & Gas Directory
Oil & Gas Equipment Marketplace Contact


 

If you cannot find the new or used offshore rigs, vessels or equipment of any type, size or make that you are looking for, please send us an email to and we shall offer you.


 

If you cannot find the new or used offshore rigs, vessels or equipment of any type, size or make that you are looking for, please send us an email to and we shall offer you.


40/60T Lattice Boom Offshore Crane for Sale
Lattice Boom Offshore Crane - 300 Ton Newbuildings
40T Offshore Wireluffing Diesel Hydraulic Crane - New
Electro-Hydraulic Knuckle Boom Offshore Crane - 5 Ton
Worldoils Oil, Gas and Offshore Marketplace    

Equipment ID   : 1112
Equipment name   : Electro-Hydraulic Knuckle Boom Offshore Crane - 5 Ton
Category   : Cranes / Lifting equipment
Specifications   : Electro Hydraulic Knuckle Boom Offshore Crane for sale
Offshore Crane for Sale
Offshore Knuckle Boom 5Ton Crane
Electro Hydraulic Knuckle Boom Offshore Crane


Technical Data
:
Slewing Angle : 360º
Slewing Speed : 0~1rpm
Luffing time : 90s Up/down
Main Winch Data :
Lifting Capacity(SWL) : 5T;
Dynamic Factor : 1.4
Working Radius : 3.0m(Min) / 12m(Max)

Main Lifting Speed : 0~15m/min
Lifting Height : 200m
List/trim Condition : 2 º /5 º
Steel Wire Dia : 22mm
Outer Layer,full Load : 5T
Wire Rope : Anti-Twist Type,Galvanized

Active Heave Compensation data :
Design parameters :
AHC SWL : 5T
Displacement : 3m
Wave period :12s

Heave (Hoisting) speed required : 54m/min
Acceleration required : 0.6m/s2
Level of Active Heave Compensation typically : ~95%

Loading forces to deck structure :
1. Dynamic overturning moment : 1380 KN.m
2. Dynamic vertivcal force : 220 KN
3. Dynamic horizontaa force  : KN

Electric Motor :
Power Supply : 440V/60Hz/3Ph
Protection Grade : IP56
Insulation Grade : F
Space Heater : 230V/60Hz/1Ph
Power consumption : 132KW

Control System
Control handle :
1. Main control valve
2. Spring centred control handles
- Hoisting up / down motion 
- Luffing up / down motion knuckle jib 
- Luffing up / down motion main boom
- Slewing right / left motion
- All motions are of infinite variable (stepless) control from zero to full speed.
3. Instruction and name plates in English
4. Dynamic load radius chart

Control Model :
1. Normal
2. Active Heave Compensation (AHC)

Safety System
1. Control system
-  Load limiting system
2. All main hydraulic circuits are protected from over-pressure by relief valves
set to values corresponding to crane’s capacities
- Overload protection
- Emergency stop
3. Drive system
- Electric motor
- Thermistor protection
- Hydraulic power unit
- High hydraulic oil temperature alarm / stop
- Low hydraulic oil level alarm / stop
4. Slewing machinery
- Load holding valve which will hold motion in case of hydraulic pressure drop
- Fail safe multi-disc brake

Slew bearing
- Reputable and recognized Maker
- Bolts and nuts of high tensile steel
Slew gear
- Gear with brake, motor and load control valve as one complete unit
- Internal pinion drive

5. Luffing machinery
- Load holding valve which will hold motion in case of hydraulic pressure drop
- Luffing cylinder(s) designed to reduce speed before reaching end positions

6.Hoisting machinery
Main winch
- Manual Overload Protection System (MOPS)
- Load holding valve which will hold motion in case of hydraulic pressure drop
- Fail safe multi-disc brake. Brake is spring operated and pressure released
- 5 turns of wire rope remain on winch drum when all wire rope is paid out
- Hook stop in upper and lower most positions

7. Wire sheaves
- Fixed wire sheave bracket
- Grease nipples

Hydraulic Arrangement
1. Hydraulic system
- Open loop system
- Hydraulic motor(s)
- Fixed displacement bent axis piston motor(s) for slewing motion.
- Fixed displacement bent axis piston motor(s) for winch(es) of fixed speed
2. Hydraulic oil tank
- Integrated in crane
- Hatch for inspection and cleaning
- Drain valve
- Full flow return filter(s), pressure and drain filters for sensitive circuits,
eg pilot and feed circuits
- Sight glass with temperature indicator
- Level switch for low level alarm and low, low level stop
- Temperature sensor for cooler control and automatic stop in case
of overheating
3.  Hydraulic lines
- Pipes:Mild steel material,Painted
- Pipe fittings: Zinc plated mild steel material.External fittings are painted
and protected by Denso tape or Tectyl against corrosion.
- Hoses:High rubber quality for best resistance against sunlight and
salinity,Wire breaded for applicable specified hydraulic pressure ratings
- Hose couplings: Zinc plated mild steel material, External couplings are
painted and protected by Denso tape or Tectyl against corrosion
4. System cleanliness
- All components are thoroughly cleaned prior to installation.
- Cleanliness to NAS level 8

Electric Arrangement

1. Power supply:Slipring assembly for transfer of electric power to
crane’s rotating sections
2. Electric motor(s) (for applicable zone)
- Motor rating S6-40 % ID / S1-100 % CD
- Protection class IP54.
- Insulation class F.
- Temperature rise class F.
- Stillstand heating against condensation
- Squirrel cage
- Self-cooling (fan)
3. Electric motor starter
- Protection class IP56.
- Safety door (main isolation) switch
i. Start push button – green colour.
ii. Stop push button – red colour.
iii. Emergency push / pull button – red colour.
iv. Lamps
- Power on – white colour
- Running – green colour
- Stillstand heating – blue colour
v. Stillstand heating control
vi. Potential-free contact for motor running feedback.

Surface Treatment
1. External treatment
- Pedestal, crane house and boom
i. Surface preparation to ISO 8501-1, SA 2.5
ii. First coat zinc rich epoxy primer to 50 µm dry film thickness
iii. Second coat two pack epoxy to 100 µm dry film thickness
iv. Third coat polyurethane finish to 65 µm dry film thickness
v. Total; three coats to 200 µm dry film thickness
2. Internal treatment
- Pedestal and crane house
i. Surface preparation to ISO 8501-1, SA 2.5
ii. First coat zinc rich epoxy primer to 40 µm dry film thickness
iii. Second coat two pack epoxy to 75 µm dry film thickness
- Oil tank (integrated in crane house)
i. 16.2.2.1 Surface preparation to ISO 8501-1, SA 2.5
ii. 16.2.2.2 First coat zinc rich epoxy primer to 40 µm dry film thickness
- Boom
No treatment as fully closed steel box structure.

Lubrication
- All grease nipples to GB standard.
- Crane:Fully lubricated for first set of operating hours

Price & terms : Please enquire using the email form below.

If you cannot find the Offshore Crane that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of containers where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

--------------------------------------------------------------------------------------------------------
Search words (for official use only) - 
Electro Hydraulic Knuckle Boom Offshore Crane for sale
Knuckle Boom Offshore Crane
Electro Hydraulic Knuckle Boom Offshore Crane - 5 Ton - For Sale
5 Ton Electro Hydraulic Knuckle Boom Offshore Crane
Offshore Crane for Sale - DNV Certificate

--------------------------------------------------------------------------------------------------------

     
Worldoils Oil, Gas and Offshore Marketplace
Worldoils Oil, Gas and Offshore Marketplace - Electro-Hydraulic Knuckle Boom Offshore Crane - 5 Ton
Images
 
Offshore Crane for Sale - 5 Ton
 
5 Ton Electro Hydraulic Knuckle Boom Offshore Crane
 
Electro Hydraulic Knuckle Boom Offshore Crane
 

Send an email to Worldoils
Note : Fields marked by (*) are mandatory.
Email to:  Worldoils
For equipment:  Electro-Hydraulic Knuckle Boom Offshore Crane - 5 Ton
Category:  Cranes / Lifting equipment
Your name:  *
Your company:  *
Your email address:  *
Your phone no.:  *
Your message:  *
Security code:
* (Use capital letters only)

 

The information contained herein is believed to be accurate but has not been verified. This equipment is subject to prior sale and sold “where-is as-is” with no warranties from Worldoils Pte Ltd or the Seller expressed or implied.
Worldoils Oil, Gas and Offshore Marketplace    Worldoils Oil, Gas and Offshore Marketplace


Vessel Monitoring Software
Offsore Rig Monitoring Software
Mobile Hospitals
Field Hospitals
LDPE Recycling

Live Monitoring of Ships and rigs

Oilfield Container Camps

Remote ship Bunker GFuel Monitoring

Oil Booster Pump for Wellhead Platforms

Mini Submarine

Ring Maintenance Software


Oil Rig Jobs

New Offshore Jackup Rigs

Used Land Rigs For Sale



Mining Container Camps

Offshore Jackup Rigs
Land Drilling Rigs
Barge  Swamp Rigs




Oil & Gas Industry Machinery & Equipment Marketplace
55M Top Deck Cargo Barge with Winch for Sale
Schramm T130 Drill Rig - Range III Telescoping Mast for Sale
Gefco / Speedstar 30K Drilling Rig - For Sale
Bucyrus Erie 10R Drilling Rig for Sale
Versa Drill V-1040DP Drill Rig - for Sale
Self Propelled Oil Barge - For Sale
Self Propelled Oil Barge - 80m - For Sale
Self Propelled Oil Barge - For Sale
Self Propelled Oil Barge - 45m - For Sale
Drillmax 250 Well Drilling Rig - For Sale
Speedstar Quickdrill Drilling Rig - For Sale
Speedstar DSI QuikDrill Drilling Rig - For Sale
Landing Craft Tank - 88 Meters - For Sale
Landing Craft Tank - 54 Meters - For Sale
Landing Craft Tank - 80 Meters - For Sale
Landing Craft Tank - 2011 Built for Sale
Landing Craft Tank - 75m - For Sale
Simco 2800 Drill Rig for Sale
Jaswell 1200 Drilling Rig - For Sale
Used Landing Craft Tank for Sale
Landing Craft Tank - 2015 Built - For Sale
Chicago Pneumatic T650 Drilling Rig - For Sale
Landing Craft Tank - 67 Meters - For Sale
Landing Craft Tank - 72 Meters - For Sale
Chicago Pneumatic T650 Drilling Rig - For Sale
Worldoils Land Rigs Market
1000hp Land Drilling Rigs
1500hp Rotary Land Drilling Rigs
2000hp Rotary Land Drilling Rigs
3000hp Rotary Land Drilling Rigs
Workover Land Rigs
Carrier Mounted Land Drilling Rigs
Trailer Mounted Land Drilling Rigs

 

 

If you cannot find the new or used offshore rigs, vessels or equipment of any type, size or make that you are looking for, please send us an email to and we shall offer you.

Electro-Hydraulic Knuckle Boom Offshore Crane - 5 Ton
Worldoils Oil, Gas and Offshore Marketplace    Worldoils Oil, Gas and Offshore Marketplace

Equipment ID   : 1112
Equipment name   : Electro-Hydraulic Knuckle Boom Offshore Crane - 5 Ton
Category   : Cranes / Lifting equipment
Specifications   : Electro Hydraulic Knuckle Boom Offshore Crane for sale
Offshore Crane for Sale
Offshore Knuckle Boom 5Ton Crane
Electro Hydraulic Knuckle Boom Offshore Crane


Technical Data
:
Slewing Angle : 360º
Slewing Speed : 0~1rpm
Luffing time : 90s Up/down
Main Winch Data :
Lifting Capacity(SWL) : 5T;
Dynamic Factor : 1.4
Working Radius : 3.0m(Min) / 12m(Max)

Main Lifting Speed : 0~15m/min
Lifting Height : 200m
List/trim Condition : 2 º /5 º
Steel Wire Dia : 22mm
Outer Layer,full Load : 5T
Wire Rope : Anti-Twist Type,Galvanized

Active Heave Compensation data :
Design parameters :
AHC SWL : 5T
Displacement : 3m
Wave period :12s

Heave (Hoisting) speed required : 54m/min
Acceleration required : 0.6m/s2
Level of Active Heave Compensation typically : ~95%

Loading forces to deck structure :
1. Dynamic overturning moment : 1380 KN.m
2. Dynamic vertivcal force : 220 KN
3. Dynamic horizontaa force  : KN

Electric Motor :
Power Supply : 440V/60Hz/3Ph
Protection Grade : IP56
Insulation Grade : F
Space Heater : 230V/60Hz/1Ph
Power consumption : 132KW

Control System
Control handle :
1. Main control valve
2. Spring centred control handles
- Hoisting up / down motion 
- Luffing up / down motion knuckle jib 
- Luffing up / down motion main boom
- Slewing right / left motion
- All motions are of infinite variable (stepless) control from zero to full speed.
3. Instruction and name plates in English
4. Dynamic load radius chart

Control Model :
1. Normal
2. Active Heave Compensation (AHC)

Safety System
1. Control system
-  Load limiting system
2. All main hydraulic circuits are protected from over-pressure by relief valves
set to values corresponding to crane’s capacities
- Overload protection
- Emergency stop
3. Drive system
- Electric motor
- Thermistor protection
- Hydraulic power unit
- High hydraulic oil temperature alarm / stop
- Low hydraulic oil level alarm / stop
4. Slewing machinery
- Load holding valve which will hold motion in case of hydraulic pressure drop
- Fail safe multi-disc brake

Slew bearing
- Reputable and recognized Maker
- Bolts and nuts of high tensile steel
Slew gear
- Gear with brake, motor and load control valve as one complete unit
- Internal pinion drive

5. Luffing machinery
- Load holding valve which will hold motion in case of hydraulic pressure drop
- Luffing cylinder(s) designed to reduce speed before reaching end positions

6.Hoisting machinery
Main winch
- Manual Overload Protection System (MOPS)
- Load holding valve which will hold motion in case of hydraulic pressure drop
- Fail safe multi-disc brake. Brake is spring operated and pressure released
- 5 turns of wire rope remain on winch drum when all wire rope is paid out
- Hook stop in upper and lower most positions

7. Wire sheaves
- Fixed wire sheave bracket
- Grease nipples

Hydraulic Arrangement
1. Hydraulic system
- Open loop system
- Hydraulic motor(s)
- Fixed displacement bent axis piston motor(s) for slewing motion.
- Fixed displacement bent axis piston motor(s) for winch(es) of fixed speed
2. Hydraulic oil tank
- Integrated in crane
- Hatch for inspection and cleaning
- Drain valve
- Full flow return filter(s), pressure and drain filters for sensitive circuits,
eg pilot and feed circuits
- Sight glass with temperature indicator
- Level switch for low level alarm and low, low level stop
- Temperature sensor for cooler control and automatic stop in case
of overheating
3.  Hydraulic lines
- Pipes:Mild steel material,Painted
- Pipe fittings: Zinc plated mild steel material.External fittings are painted
and protected by Denso tape or Tectyl against corrosion.
- Hoses:High rubber quality for best resistance against sunlight and
salinity,Wire breaded for applicable specified hydraulic pressure ratings
- Hose couplings: Zinc plated mild steel material, External couplings are
painted and protected by Denso tape or Tectyl against corrosion
4. System cleanliness
- All components are thoroughly cleaned prior to installation.
- Cleanliness to NAS level 8

Electric Arrangement

1. Power supply:Slipring assembly for transfer of electric power to
crane’s rotating sections
2. Electric motor(s) (for applicable zone)
- Motor rating S6-40 % ID / S1-100 % CD
- Protection class IP54.
- Insulation class F.
- Temperature rise class F.
- Stillstand heating against condensation
- Squirrel cage
- Self-cooling (fan)
3. Electric motor starter
- Protection class IP56.
- Safety door (main isolation) switch
i. Start push button – green colour.
ii. Stop push button – red colour.
iii. Emergency push / pull button – red colour.
iv. Lamps
- Power on – white colour
- Running – green colour
- Stillstand heating – blue colour
v. Stillstand heating control
vi. Potential-free contact for motor running feedback.

Surface Treatment
1. External treatment
- Pedestal, crane house and boom
i. Surface preparation to ISO 8501-1, SA 2.5
ii. First coat zinc rich epoxy primer to 50 µm dry film thickness
iii. Second coat two pack epoxy to 100 µm dry film thickness
iv. Third coat polyurethane finish to 65 µm dry film thickness
v. Total; three coats to 200 µm dry film thickness
2. Internal treatment
- Pedestal and crane house
i. Surface preparation to ISO 8501-1, SA 2.5
ii. First coat zinc rich epoxy primer to 40 µm dry film thickness
iii. Second coat two pack epoxy to 75 µm dry film thickness
- Oil tank (integrated in crane house)
i. 16.2.2.1 Surface preparation to ISO 8501-1, SA 2.5
ii. 16.2.2.2 First coat zinc rich epoxy primer to 40 µm dry film thickness
- Boom
No treatment as fully closed steel box structure.

Lubrication
- All grease nipples to GB standard.
- Crane:Fully lubricated for first set of operating hours

Price & terms : Please enquire using the email form below.

If you cannot find the Offshore Crane that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of containers where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

--------------------------------------------------------------------------------------------------------
Search words (for official use only) - 
Electro Hydraulic Knuckle Boom Offshore Crane for sale
Knuckle Boom Offshore Crane
Electro Hydraulic Knuckle Boom Offshore Crane - 5 Ton - For Sale
5 Ton Electro Hydraulic Knuckle Boom Offshore Crane
Offshore Crane for Sale - DNV Certificate

--------------------------------------------------------------------------------------------------------

     
Worldoils Oil, Gas and Offshore Marketplace
Worldoils Oil, Gas and Offshore Marketplace - Electro-Hydraulic Knuckle Boom Offshore Crane - 5 Ton
Images
 
Offshore Crane for Sale - 5 Ton
 
5 Ton Electro Hydraulic Knuckle Boom Offshore Crane
 
Electro Hydraulic Knuckle Boom Offshore Crane
 

To enquire on this equipment, please send an email to

The information contained herein is believed to be accurate but has not been verified. This equipment is subject to prior sale and sold “where-is as-is” with no warranties from Worldoils Pte Ltd or the Seller expressed or implied.
Worldoils Oil, Gas and Offshore Marketplace    Worldoils Oil, Gas and Offshore Marketplace

 

Worldoils Land Rigs Market
1000hp Land Drilling Rigs
1500hp Rotary Land Drilling Rigs
2000hp Rotary Land Drilling Rigs
3000hp Rotary Land Drilling Rigs
Workover Land Rigs
Carrier Mounted Land Drilling Rigs
Trailer Mounted Land Drilling Rigs

Oilfield Container Camps

Oil Booster Pump for Wellhead Platforms

Offshore Jackup Rigs
Land Drilling Rigs
Barge  Swamp Rigs

Live Monitoring of Ships and rigs

Remote ship Bunker GFuel Monitoring

Ring Maintenance Software

New Offshore Jackup Rigs

Oil Rig Jobs

Helicopters for Sale, Helicopters for Oil Rig Services


 

If you cannot find the new or used offshore rigs, vessels or equipment of any type, size or make that you are looking for, please send us an email to and we shall offer you.

Electro-Hydraulic Knuckle Boom Offshore Crane - 5 Ton
Worldoils Oil, Gas and Offshore Marketplace    
Worldoils Oil, Gas and Offshore Marketplace

Equipment ID   : 1112
Equipment name   : Electro-Hydraulic Knuckle Boom Offshore Crane - 5 Ton
Category   : Cranes / Lifting equipment
 
Specifications  :
Electro Hydraulic Knuckle Boom Offshore Crane for sale
Offshore Crane for Sale
Offshore Knuckle Boom 5Ton Crane
Electro Hydraulic Knuckle Boom Offshore Crane


Technical Data
:
Slewing Angle : 360º
Slewing Speed : 0~1rpm
Luffing time : 90s Up/down
Main Winch Data :
Lifting Capacity(SWL) : 5T;
Dynamic Factor : 1.4
Working Radius : 3.0m(Min) / 12m(Max)

Main Lifting Speed : 0~15m/min
Lifting Height : 200m
List/trim Condition : 2 º /5 º
Steel Wire Dia : 22mm
Outer Layer,full Load : 5T
Wire Rope : Anti-Twist Type,Galvanized

Active Heave Compensation data :
Design parameters :
AHC SWL : 5T
Displacement : 3m
Wave period :12s

Heave (Hoisting) speed required : 54m/min
Acceleration required : 0.6m/s2
Level of Active Heave Compensation typically : ~95%

Loading forces to deck structure :
1. Dynamic overturning moment : 1380 KN.m
2. Dynamic vertivcal force : 220 KN
3. Dynamic horizontaa force  : KN

Electric Motor :
Power Supply : 440V/60Hz/3Ph
Protection Grade : IP56
Insulation Grade : F
Space Heater : 230V/60Hz/1Ph
Power consumption : 132KW

Control System
Control handle :
1. Main control valve
2. Spring centred control handles
- Hoisting up / down motion 
- Luffing up / down motion knuckle jib 
- Luffing up / down motion main boom
- Slewing right / left motion
- All motions are of infinite variable (stepless) control from zero to full speed.
3. Instruction and name plates in English
4. Dynamic load radius chart

Control Model :
1. Normal
2. Active Heave Compensation (AHC)

Safety System
1. Control system
-  Load limiting system
2. All main hydraulic circuits are protected from over-pressure by relief valves
set to values corresponding to crane’s capacities
- Overload protection
- Emergency stop
3. Drive system
- Electric motor
- Thermistor protection
- Hydraulic power unit
- High hydraulic oil temperature alarm / stop
- Low hydraulic oil level alarm / stop
4. Slewing machinery
- Load holding valve which will hold motion in case of hydraulic pressure drop
- Fail safe multi-disc brake

Slew bearing
- Reputable and recognized Maker
- Bolts and nuts of high tensile steel
Slew gear
- Gear with brake, motor and load control valve as one complete unit
- Internal pinion drive

5. Luffing machinery
- Load holding valve which will hold motion in case of hydraulic pressure drop
- Luffing cylinder(s) designed to reduce speed before reaching end positions

6.Hoisting machinery
Main winch
- Manual Overload Protection System (MOPS)
- Load holding valve which will hold motion in case of hydraulic pressure drop
- Fail safe multi-disc brake. Brake is spring operated and pressure released
- 5 turns of wire rope remain on winch drum when all wire rope is paid out
- Hook stop in upper and lower most positions

7. Wire sheaves
- Fixed wire sheave bracket
- Grease nipples

Hydraulic Arrangement
1. Hydraulic system
- Open loop system
- Hydraulic motor(s)
- Fixed displacement bent axis piston motor(s) for slewing motion.
- Fixed displacement bent axis piston motor(s) for winch(es) of fixed speed
2. Hydraulic oil tank
- Integrated in crane
- Hatch for inspection and cleaning
- Drain valve
- Full flow return filter(s), pressure and drain filters for sensitive circuits,
eg pilot and feed circuits
- Sight glass with temperature indicator
- Level switch for low level alarm and low, low level stop
- Temperature sensor for cooler control and automatic stop in case
of overheating
3.  Hydraulic lines
- Pipes:Mild steel material,Painted
- Pipe fittings: Zinc plated mild steel material.External fittings are painted
and protected by Denso tape or Tectyl against corrosion.
- Hoses:High rubber quality for best resistance against sunlight and
salinity,Wire breaded for applicable specified hydraulic pressure ratings
- Hose couplings: Zinc plated mild steel material, External couplings are
painted and protected by Denso tape or Tectyl against corrosion
4. System cleanliness
- All components are thoroughly cleaned prior to installation.
- Cleanliness to NAS level 8

Electric Arrangement

1. Power supply:Slipring assembly for transfer of electric power to
crane’s rotating sections
2. Electric motor(s) (for applicable zone)
- Motor rating S6-40 % ID / S1-100 % CD
- Protection class IP54.
- Insulation class F.
- Temperature rise class F.
- Stillstand heating against condensation
- Squirrel cage
- Self-cooling (fan)
3. Electric motor starter
- Protection class IP56.
- Safety door (main isolation) switch
i. Start push button – green colour.
ii. Stop push button – red colour.
iii. Emergency push / pull button – red colour.
iv. Lamps
- Power on – white colour
- Running – green colour
- Stillstand heating – blue colour
v. Stillstand heating control
vi. Potential-free contact for motor running feedback.

Surface Treatment
1. External treatment
- Pedestal, crane house and boom
i. Surface preparation to ISO 8501-1, SA 2.5
ii. First coat zinc rich epoxy primer to 50 µm dry film thickness
iii. Second coat two pack epoxy to 100 µm dry film thickness
iv. Third coat polyurethane finish to 65 µm dry film thickness
v. Total; three coats to 200 µm dry film thickness
2. Internal treatment
- Pedestal and crane house
i. Surface preparation to ISO 8501-1, SA 2.5
ii. First coat zinc rich epoxy primer to 40 µm dry film thickness
iii. Second coat two pack epoxy to 75 µm dry film thickness
- Oil tank (integrated in crane house)
i. 16.2.2.1 Surface preparation to ISO 8501-1, SA 2.5
ii. 16.2.2.2 First coat zinc rich epoxy primer to 40 µm dry film thickness
- Boom
No treatment as fully closed steel box structure.

Lubrication
- All grease nipples to GB standard.
- Crane:Fully lubricated for first set of operating hours

Price & terms : Please enquire using the email form below.

If you cannot find the Offshore Crane that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of containers where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

--------------------------------------------------------------------------------------------------------
Search words (for official use only) - 
Electro Hydraulic Knuckle Boom Offshore Crane for sale
Knuckle Boom Offshore Crane
Electro Hydraulic Knuckle Boom Offshore Crane - 5 Ton - For Sale
5 Ton Electro Hydraulic Knuckle Boom Offshore Crane
Offshore Crane for Sale - DNV Certificate

--------------------------------------------------------------------------------------------------------

     
Worldoils Oil, Gas and Offshore Marketplace
Worldoils Oil, Gas and Offshore Marketplace - Electro-Hydraulic Knuckle Boom Offshore Crane - 5 Ton
Images
 
Offshore Crane for Sale - 5 Ton
 
5 Ton Electro Hydraulic Knuckle Boom Offshore Crane
 
Electro Hydraulic Knuckle Boom Offshore Crane
 

To enquire on this equipment, please send an email to

The information contained herein is believed to be accurate but has not been verified. This equipment is subject to prior sale and sold “where-is as-is” with no warranties from Worldoils Pte Ltd or the Seller expressed or implied.
Worldoils Oil, Gas and Offshore Marketplace    
Worldoils Oil, Gas and Offshore Marketplace

 


 

If you cannot find the new or used offshore rigs, vessels or equipment of any type, size or make that you are looking for, please send us an email to and we shall offer you.


.......................................................................
www.worldoils.com |  Disclaimer