Oil & Gas land drilling rigs for sale, Land drilling rigs for sale
Worldoils
Home Biofuels Oil & Gas Directory Glossary Research Training News Newsletter Events Oil & Gas Jobs Contact Water Well Rigs Boats
Land Drilling Rigs Jackup Rigs LDPE Recycling Oilfield Container Camps Offshore Accommodation Steel Houses Mini Submarines Oil & Gas Equipment Marketplace
Home Biofuels Oil & Gas Directory Glossary Research Training News
Newsletter Events Oil & Gas Jobs Water Well Rigs Land Drilling Rigs
Jackup Rigs Boats LDPE Recycling Oilfield Container Camps Crude Oil Price History
Steel Houses Mini Submarines Oil & Gas Equipment Marketplace Contact
Home Jackup Rigs LDPE Recycling Boats
News Water Well Rigs Land Drilling Rigs
Mini Submarines Events Steel Houses
Oilfield Container Camps Oil & Gas Directory
Oil & Gas Equipment Marketplace Contact


 

If you cannot find the new or used offshore rigs, vessels or equipment of any type, size or make that you are looking for, please send us an email to and we shall offer you.


 

If you cannot find the new or used offshore rigs, vessels or equipment of any type, size or make that you are looking for, please send us an email to and we shall offer you.


Backyard Equipment Package - For Sale
Worldoils Oil, Gas and Offshore Marketplace    

Equipment ID   : 2524
Equipment name   : Backyard Equipment Package - For Sale
Category   : Land Rigs
Specifications   :
Backyard Equipment Package for Sale
Telescoping Substructure & Accessories - For Sale
BOP for Sale
Mud Pump for Sale

Section 1 - Substructure & Accesssories
1.1 Telescoping Substructure API 4F 4th Edition
 Rotary capacity : 425,000 lbs
- Setback capacity : 300,000 lbs
- Height : 16’
- Certified plaque engraved with A.P.I monogram 4F 4th Edition, PSL 1, E2/U2
- Four hydraulic rams to raise and lower sub structure
- Two hydraulic rams to raise and lower side floor wings
- Hydraulic controls six valve bank with flow divider
- Install two snub posts in between main hole and mouse hole
- Install BOP handling system for 11” x 5000 PSI stack

1.2 Rotary Table
- Supply and install one 17 1/2”Hecker or American Block rotary table
- Rotary Table c/w split Master bushing and insert bowl.
- Supply and install rotary torque system

1.3 Chain Case for Rotary

- Supply and install drop down chain case from rotary

1.4 Electrical

- Supply and install (three) four foot explosion proof fluorescent lights in cellar area

1.5 T Sill
- Fabricate and supply 40’ t sill with all lugs to support the free standing mast

1.6 Ramp

- Fabricate and supply ramp with 4” welded pump line running down the side

1.7 Paint
- Substructure has been painted gray

Section 2 - Catwalk / V-Door
2.1 Catwalk / V-Door
- Supply 45ft. catwalk with fold up v-door with pipe cut out

Section 3 - Overhead Equipment

3.1 Block/Hook
- Supply 160 ton TSM block / hook combination
- Four each 30” sheaves for 1” drill line

3.2 Swivel

- Supply 150 TON TSM Rotary Swivel
- Swivel c/w Kelly spinner stand
- Quill sub 4 ½” Reg. left hand thread – 6 5/8” Reg. Left

Section 4 - Mud Pump
4.1 Diesel Engine
- Supply (1) one Caterpillar C‐15 series engines rated at 540 HP

4.2 Pump Drive

- Supply and install one Allison OFS 4700 Transmission

4.3 Pump #1

- Supply one new Gardner Denver PZ‐7 mud pump

4.4 Mud Pumps Skid & Accessories

- Total building dimensions to be 37’ long 12’ wide
- Supply one oilfield skid 40’ X 12’ using 4 beam 12”@50 lb
- Install ¾”x 7” strapping on bottom of skid runners
- Cross members 10” @ 33 LB flooring to be 3/16” checker plate
- Supply and install pump with 4” valve, 2” pop valve, 2” bleeder valve and type D
mud gauge
- Supply one precharge pumps 60 hp 6 X 5 X 11 with suction screens
- Fabricate all precharge and suction lines from mud tank
- Fabricate all high pressure lines on skids. Pressure test chart and x‐ray done on all
high pressure lines
- Supply 5000 PSI shock hose in between pump and ramp with integral ends
- Supply one liner wash pump and liner wash tank with plumbing
- Supply one K20 dampener and cross
- Supply and install one diesel day tank with hosing for circulating system

4.5 Electrical
- Supply and install (4) four foot fluorescents in each building
- Supply and install one distribution panel

4.6 Paint

- Mud Pump skid has been painted avocado green

Section 5 - Mud Tank

5.1 Mud Tank Specifications
- Total tank dimensions to be 50’ long 12’ wide
- One oilfield skids 53’ X 7’10” using three beam 12” @ 50 lb.
- Cross members 10” @ 33 lb with 1/4” formed plate flooring
- Walls on tank corrugated 1/4” plate tank perimeter tbg frame
- Fabricate 11 gauge building over top of mixing hopper and pumps
- Fabricate and install hopper door access on side of mix building
- Supply and install exhaust fan
- Fabricate and install two doors on front of mud mix building
- All unions for piping on tanks will be hammer style
- All suction lines will have bridge gate valves and be sumped
- Supply and install 30” poor boy degasser
- Suction lines inside tank 10” for pump and 6” for mixing
- One 4” mud roll line with 2” mud guns
- One 6” hopper lines with buttery fly valves
- One discharge manifold for both pumps

5.2 Tank Capacities
- Pill tank 30 bbls.
- Suction tank 120 bbls.
- Settling tank 105 bbls.
- Settling tank 110 bbls
- Shaker tank 100 bbls.
- Sand trap 10 bbls
- Trip tank 25 bbls.

5.3 Equipment

- One DFTS mud conditioner
- Mud cleaner consist of 16 cone Desilter and 2 cone Desander
- Three MA – 10 hp 380 volt RG mud agitators
- Supply and install five jet guns
- Supply and install single hopper mixing system  
- One 8” X 6” X 14” 60 HP 460 volt overhead motor driven by belts for Mixing pump 
- Two 6” x 5” x 11” 50 HP 380 volt overhead motor driven by belts (Desilter & Desander pumps)
- One explosion proof 10 HP trip tank pump

5.4 Electrical
- Supply and install four fluorescent lighting on telescoping posts
- Supply and install all electrical hard wiring and jumper cords
- Supply and install distribution panel at mixing end of tank
- Supply remote switch for trip tank pump to driller’s panel

5.5 Paint

- Mud tank skid has been painted avocado green

Section 6 - Generators / Combination Building

6.1 Diesel Engine
- Supply Two Caterpillar C‐15 engine rated at 540 HP

6.2 Generators
- Supply Caterpillar generator prime power is (50Hz) 355 kW

6.3 Electrical

- Supply one transfer switch 600 amps
- Supply one 380 Volt panels with pin and sleeve plugs
- Supply one 380/222 panel with pin and sleeve plugs with 100 amp outlet for lease
accommodation shacks
- Supply and install plug box on building for cord ends
- Supply spare starters and plug in for 60 HP and 30 HP
- Supply and install four foot fluorescents inside building
- Supply and install two sodium vapour lights on roof
- Supply all extension cords from gen building to outside support buildings

6.4 Building
- Fabricate triple beam skid 48’ long x 16’‐6” wide from 12” beam
- Install 6” roll ends and cover entire skid with 3/16” checker plate
- Shear, form and stand building 45’ long x 12’‐6” wide x 8’6” high
- Install tubing roof perimeter and sloped roof panels
- Install (3) divider walls inside building for (3) separate rooms
- Supply and install steel doors/frames into each room
- Fabricate 2 ft. wide cable tray on top of combination building
- Install 6x4 bumper posts on both ends of skid

6.5 Lightplant Room

- Lightplant room is 12’ wide x 20” long
- Supply and install (2) two Caterpillar C‐15 – 355 kW, 380V, 3 phase diesel
generators
- Fabricate and install 140 gallon fuel tank in corner of room
- Supply and install Sullivan Palatek 30 hp rotary screw air compressor with 120
gallon tank
- Install hinged door on side of building for electrical cabling access.

6.6 Accumulator Room
- Accumulator room is 12’ 6” long x 12’ wide and 8’ 6”
- Supply and install 4 station 120 gallon Control Technology Accumulator
- 10 each 11 gallon accumulator bottles
- One T‐25 Weatherford triplex charge pump
- Two 8 ½”, 40:1 air pumps

6.7 Paint
- Combination building has been painted gray

Section 7 - Well Control
7.1 Choke Manifold
- Oilfield skid dimensions to be 10’ long 6’ wide.
- Supply one single gut 2” X 3” choke manifold c/w manual choke

7.2 Blowout Preventors
- Supply one 11” 5000 PSI new Cameron Townsend T‐84 double ram preventer with
one set 3 ½” rams and one set of blind rams

7.3 Annular

- Supply one 11” 3000 PSI new Cameron (Townsend) T‐90 Annular

7.4 BOP Accessories

- Supply one 3 1/8” SS flanged 30’ 5000 PSI choke hose
- Supply one adapter spool 11” x 5,000 psi – 11” x 3,000 psi
- Supply one 11” 5000 PSI drilling spool with 3 1/8” outlets
- Supply one 3 1/8” 5000 PSI HCR gate valve (hydraulic)
- Supply and install 3 1/8” 5000 PSI manual gate valve
- Supply two 2 1/16” 5000 PSI manual gate valve
- Supply one 2 1 /16” 5000 PSI check valve
- Supply one DSA 2 1/16” X 3 1/8”
- Supply all studs and ring gaskets

Section 8 - Casing Stabbing Board

8.1 Casing Stabbing Board
- Air operated casing stabbing board

Section 9 - Water/Fuel/Change House Skid

9.1 Water Tank
- Supply 100 barrel skid mounted water tank
- Supply and install two 4 x 3 Centrifugal transfer pumps
- Supply and install discharge and suction manifolds
- Tank will be built from ¼” plate
- Tank access hatch and drain plug

9.2 Fuel Tank
- Supply skid mounted fuel tank 100 barrels
- Supply and install two 3/4 hp 110v fuel pumps 1 ¼” X 1”
- Supply and install discharge and suction manifolds
- Supply one fuel water and solids separator
- Tank will be built from 1/4” plate
- Tank access hatch, drain plug and sight glass

9.3 Change House

- Change room is 12’ wide x 12’ 6” long
- Fabricate and install fold down lunch table
- Supply and install padded bench
- Supply and install 12 change lockers

Section 10 - Kelly Bar & Bushings
10.1 Kelly Bar & Kelly Drive Bushings
- 4 ¼” Hex Kelly 37’ overall c/w shipping scabbard.
- Square Drive Bushing for 4 ¼” Hex Kelly & 17 ½” rotary table

Price & terms : Please enquire using the email form below.       

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
BOP Accessories for sale
Mud Pump Skid & Accessories - For Sale
Substructure & Accessories for Sale
Generators for Sale

----------------------------------------------------------------------------------------------------------
     
Worldoils Oil, Gas and Offshore Marketplace
Worldoils Oil, Gas and Offshore Marketplace - Backyard Equipment Package - For Sale
Images
 
Backyard Equipment for Sale
 
Telescoping Substructure - For Sale
 
Hook for Sale
 
Mud Pump for Sale
 
BOP for Sale
 

Send an email to Worldoils
Note : Fields marked by (*) are mandatory.
Email to:  Worldoils
For equipment:  Backyard Equipment Package - For Sale
Category:  Land Rigs
Your name:  *
Your company:  *
Your email address:  *
Your phone no.:  *
Your message:  *
Security code:
* (Use capital letters only)

 

The information contained herein is believed to be accurate but has not been verified. This equipment is subject to prior sale and sold “where-is as-is” with no warranties from Worldoils Pte Ltd or the Seller expressed or implied.
Worldoils Oil, Gas and Offshore Marketplace    Worldoils Oil, Gas and Offshore Marketplace


Vessel Monitoring Software
Offsore Rig Monitoring Software
Mobile Hospitals
Field Hospitals
LDPE Recycling

Live Monitoring of Ships and rigs

Oilfield Container Camps

Remote ship Bunker GFuel Monitoring

Oil Booster Pump for Wellhead Platforms

Mini Submarine

Helicopters for Sale, Helicopters for Oil Rig Services

Ring Maintenance Software

Helicopters for Oilfields


Oil Rig Jobs

New Offshore Jackup Rigs

Used Land Rigs For Sale



Mining Container Camps

Offshore Jackup Rigs
Land Drilling Rigs
Barge  Swamp Rigs




Oil & Gas Industry Machinery & Equipment Marketplace
Chicago Pneumatic T670W Drilling Rig - For Sale
Mobile B57 Drilling Rig - 1988 Built - For Sale
Mobile B-59 Drilling Rig for Sale
Mobile Drilling Rig - 1988 Built for Sale
Mobile B61 HDX Drilling Rig for Sale
Mobile B56 Drilling Rig For Sale
Texoma 600-30 Foundation Drilling Rig for Sale
CME 850 Drilling Rig - For Sale
Reichdrill C-450 Drilling Rig - For Sale
CME 75 Drilling Rig - 1988 Built for Sale
Reichdrill C-700 Crawler Drilling Rig - For Sale
Sling Shot Hydraulic Lift Triple Drilling Rig for Sale
Cantilever Mast on Dolly Hydraulic Lift Triple Rig for Sale
2013 Built Swing Lift Triple Drilling Rig for Sale
Parallelogram Style Land Drilling Rig for Sale
2013 Built Carrier Mounted Telescopic Mast for Sale
1000Hp Parallelogram Style - Telescopic Mast Double Rig
1000Hp Parallelogram Style - Telescopic Mast, Double Rig
2013 Built Carrier Mounted Telescopic Mast for Sale
2000HP Swing Up Triple Drilling Rig for sale
2000HP Swing Up Triple Drilling Rig for sale
Chicago Pneumatic T650 Blasthole Drill Rigs for Sale
Soilmec R-620 Crawler Drilling Rig - For Sale
Soilmec SR50 Drilli Rig For Sale
Soilmec SR30 Drilling Rig - For Sale
Worldoils Land Rigs Market
1000hp Land Drilling Rigs
1500hp Rotary Land Drilling Rigs
2000hp Rotary Land Drilling Rigs
3000hp Rotary Land Drilling Rigs
Workover Land Rigs
Carrier Mounted Land Drilling Rigs
Trailer Mounted Land Drilling Rigs

 

 

If you cannot find the new or used offshore rigs, vessels or equipment of any type, size or make that you are looking for, please send us an email to and we shall offer you.

Backyard Equipment Package - For Sale
Worldoils Oil, Gas and Offshore Marketplace    Worldoils Oil, Gas and Offshore Marketplace

Equipment ID   : 2524
Equipment name   : Backyard Equipment Package - For Sale
Category   : Land Rigs
Specifications   :
Backyard Equipment Package for Sale
Telescoping Substructure & Accessories - For Sale
BOP for Sale
Mud Pump for Sale

Section 1 - Substructure & Accesssories
1.1 Telescoping Substructure API 4F 4th Edition
 Rotary capacity : 425,000 lbs
- Setback capacity : 300,000 lbs
- Height : 16’
- Certified plaque engraved with A.P.I monogram 4F 4th Edition, PSL 1, E2/U2
- Four hydraulic rams to raise and lower sub structure
- Two hydraulic rams to raise and lower side floor wings
- Hydraulic controls six valve bank with flow divider
- Install two snub posts in between main hole and mouse hole
- Install BOP handling system for 11” x 5000 PSI stack

1.2 Rotary Table
- Supply and install one 17 1/2”Hecker or American Block rotary table
- Rotary Table c/w split Master bushing and insert bowl.
- Supply and install rotary torque system

1.3 Chain Case for Rotary

- Supply and install drop down chain case from rotary

1.4 Electrical

- Supply and install (three) four foot explosion proof fluorescent lights in cellar area

1.5 T Sill
- Fabricate and supply 40’ t sill with all lugs to support the free standing mast

1.6 Ramp

- Fabricate and supply ramp with 4” welded pump line running down the side

1.7 Paint
- Substructure has been painted gray

Section 2 - Catwalk / V-Door
2.1 Catwalk / V-Door
- Supply 45ft. catwalk with fold up v-door with pipe cut out

Section 3 - Overhead Equipment

3.1 Block/Hook
- Supply 160 ton TSM block / hook combination
- Four each 30” sheaves for 1” drill line

3.2 Swivel

- Supply 150 TON TSM Rotary Swivel
- Swivel c/w Kelly spinner stand
- Quill sub 4 ½” Reg. left hand thread – 6 5/8” Reg. Left

Section 4 - Mud Pump
4.1 Diesel Engine
- Supply (1) one Caterpillar C‐15 series engines rated at 540 HP

4.2 Pump Drive

- Supply and install one Allison OFS 4700 Transmission

4.3 Pump #1

- Supply one new Gardner Denver PZ‐7 mud pump

4.4 Mud Pumps Skid & Accessories

- Total building dimensions to be 37’ long 12’ wide
- Supply one oilfield skid 40’ X 12’ using 4 beam 12”@50 lb
- Install ¾”x 7” strapping on bottom of skid runners
- Cross members 10” @ 33 LB flooring to be 3/16” checker plate
- Supply and install pump with 4” valve, 2” pop valve, 2” bleeder valve and type D
mud gauge
- Supply one precharge pumps 60 hp 6 X 5 X 11 with suction screens
- Fabricate all precharge and suction lines from mud tank
- Fabricate all high pressure lines on skids. Pressure test chart and x‐ray done on all
high pressure lines
- Supply 5000 PSI shock hose in between pump and ramp with integral ends
- Supply one liner wash pump and liner wash tank with plumbing
- Supply one K20 dampener and cross
- Supply and install one diesel day tank with hosing for circulating system

4.5 Electrical
- Supply and install (4) four foot fluorescents in each building
- Supply and install one distribution panel

4.6 Paint

- Mud Pump skid has been painted avocado green

Section 5 - Mud Tank

5.1 Mud Tank Specifications
- Total tank dimensions to be 50’ long 12’ wide
- One oilfield skids 53’ X 7’10” using three beam 12” @ 50 lb.
- Cross members 10” @ 33 lb with 1/4” formed plate flooring
- Walls on tank corrugated 1/4” plate tank perimeter tbg frame
- Fabricate 11 gauge building over top of mixing hopper and pumps
- Fabricate and install hopper door access on side of mix building
- Supply and install exhaust fan
- Fabricate and install two doors on front of mud mix building
- All unions for piping on tanks will be hammer style
- All suction lines will have bridge gate valves and be sumped
- Supply and install 30” poor boy degasser
- Suction lines inside tank 10” for pump and 6” for mixing
- One 4” mud roll line with 2” mud guns
- One 6” hopper lines with buttery fly valves
- One discharge manifold for both pumps

5.2 Tank Capacities
- Pill tank 30 bbls.
- Suction tank 120 bbls.
- Settling tank 105 bbls.
- Settling tank 110 bbls
- Shaker tank 100 bbls.
- Sand trap 10 bbls
- Trip tank 25 bbls.

5.3 Equipment

- One DFTS mud conditioner
- Mud cleaner consist of 16 cone Desilter and 2 cone Desander
- Three MA – 10 hp 380 volt RG mud agitators
- Supply and install five jet guns
- Supply and install single hopper mixing system  
- One 8” X 6” X 14” 60 HP 460 volt overhead motor driven by belts for Mixing pump 
- Two 6” x 5” x 11” 50 HP 380 volt overhead motor driven by belts (Desilter & Desander pumps)
- One explosion proof 10 HP trip tank pump

5.4 Electrical
- Supply and install four fluorescent lighting on telescoping posts
- Supply and install all electrical hard wiring and jumper cords
- Supply and install distribution panel at mixing end of tank
- Supply remote switch for trip tank pump to driller’s panel

5.5 Paint

- Mud tank skid has been painted avocado green

Section 6 - Generators / Combination Building

6.1 Diesel Engine
- Supply Two Caterpillar C‐15 engine rated at 540 HP

6.2 Generators
- Supply Caterpillar generator prime power is (50Hz) 355 kW

6.3 Electrical

- Supply one transfer switch 600 amps
- Supply one 380 Volt panels with pin and sleeve plugs
- Supply one 380/222 panel with pin and sleeve plugs with 100 amp outlet for lease
accommodation shacks
- Supply and install plug box on building for cord ends
- Supply spare starters and plug in for 60 HP and 30 HP
- Supply and install four foot fluorescents inside building
- Supply and install two sodium vapour lights on roof
- Supply all extension cords from gen building to outside support buildings

6.4 Building
- Fabricate triple beam skid 48’ long x 16’‐6” wide from 12” beam
- Install 6” roll ends and cover entire skid with 3/16” checker plate
- Shear, form and stand building 45’ long x 12’‐6” wide x 8’6” high
- Install tubing roof perimeter and sloped roof panels
- Install (3) divider walls inside building for (3) separate rooms
- Supply and install steel doors/frames into each room
- Fabricate 2 ft. wide cable tray on top of combination building
- Install 6x4 bumper posts on both ends of skid

6.5 Lightplant Room

- Lightplant room is 12’ wide x 20” long
- Supply and install (2) two Caterpillar C‐15 – 355 kW, 380V, 3 phase diesel
generators
- Fabricate and install 140 gallon fuel tank in corner of room
- Supply and install Sullivan Palatek 30 hp rotary screw air compressor with 120
gallon tank
- Install hinged door on side of building for electrical cabling access.

6.6 Accumulator Room
- Accumulator room is 12’ 6” long x 12’ wide and 8’ 6”
- Supply and install 4 station 120 gallon Control Technology Accumulator
- 10 each 11 gallon accumulator bottles
- One T‐25 Weatherford triplex charge pump
- Two 8 ½”, 40:1 air pumps

6.7 Paint
- Combination building has been painted gray

Section 7 - Well Control
7.1 Choke Manifold
- Oilfield skid dimensions to be 10’ long 6’ wide.
- Supply one single gut 2” X 3” choke manifold c/w manual choke

7.2 Blowout Preventors
- Supply one 11” 5000 PSI new Cameron Townsend T‐84 double ram preventer with
one set 3 ½” rams and one set of blind rams

7.3 Annular

- Supply one 11” 3000 PSI new Cameron (Townsend) T‐90 Annular

7.4 BOP Accessories

- Supply one 3 1/8” SS flanged 30’ 5000 PSI choke hose
- Supply one adapter spool 11” x 5,000 psi – 11” x 3,000 psi
- Supply one 11” 5000 PSI drilling spool with 3 1/8” outlets
- Supply one 3 1/8” 5000 PSI HCR gate valve (hydraulic)
- Supply and install 3 1/8” 5000 PSI manual gate valve
- Supply two 2 1/16” 5000 PSI manual gate valve
- Supply one 2 1 /16” 5000 PSI check valve
- Supply one DSA 2 1/16” X 3 1/8”
- Supply all studs and ring gaskets

Section 8 - Casing Stabbing Board

8.1 Casing Stabbing Board
- Air operated casing stabbing board

Section 9 - Water/Fuel/Change House Skid

9.1 Water Tank
- Supply 100 barrel skid mounted water tank
- Supply and install two 4 x 3 Centrifugal transfer pumps
- Supply and install discharge and suction manifolds
- Tank will be built from ¼” plate
- Tank access hatch and drain plug

9.2 Fuel Tank
- Supply skid mounted fuel tank 100 barrels
- Supply and install two 3/4 hp 110v fuel pumps 1 ¼” X 1”
- Supply and install discharge and suction manifolds
- Supply one fuel water and solids separator
- Tank will be built from 1/4” plate
- Tank access hatch, drain plug and sight glass

9.3 Change House

- Change room is 12’ wide x 12’ 6” long
- Fabricate and install fold down lunch table
- Supply and install padded bench
- Supply and install 12 change lockers

Section 10 - Kelly Bar & Bushings
10.1 Kelly Bar & Kelly Drive Bushings
- 4 ¼” Hex Kelly 37’ overall c/w shipping scabbard.
- Square Drive Bushing for 4 ¼” Hex Kelly & 17 ½” rotary table

Price & terms : Please enquire using the email form below.       

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
BOP Accessories for sale
Mud Pump Skid & Accessories - For Sale
Substructure & Accessories for Sale
Generators for Sale

----------------------------------------------------------------------------------------------------------
     
Worldoils Oil, Gas and Offshore Marketplace
Worldoils Oil, Gas and Offshore Marketplace - Backyard Equipment Package - For Sale
Images
 
Backyard Equipment for Sale
 
Telescoping Substructure - For Sale
 
Hook for Sale
 
Mud Pump for Sale
 
BOP for Sale
 

To enquire on this equipment, please send an email to

The information contained herein is believed to be accurate but has not been verified. This equipment is subject to prior sale and sold “where-is as-is” with no warranties from Worldoils Pte Ltd or the Seller expressed or implied.
Worldoils Oil, Gas and Offshore Marketplace    Worldoils Oil, Gas and Offshore Marketplace

 

Worldoils Land Rigs Market
1000hp Land Drilling Rigs
1500hp Rotary Land Drilling Rigs
2000hp Rotary Land Drilling Rigs
3000hp Rotary Land Drilling Rigs
Workover Land Rigs
Carrier Mounted Land Drilling Rigs
Trailer Mounted Land Drilling Rigs

Oilfield Container Camps

Oil Booster Pump for Wellhead Platforms

Offshore Jackup Rigs
Land Drilling Rigs
Barge  Swamp Rigs

Live Monitoring of Ships and rigs

Remote ship Bunker GFuel Monitoring

Ring Maintenance Software

New Offshore Jackup Rigs

Oil Rig Jobs

Helicopters for Sale, Helicopters for Oil Rig Services


 

If you cannot find the new or used offshore rigs, vessels or equipment of any type, size or make that you are looking for, please send us an email to and we shall offer you.

Backyard Equipment Package - For Sale
Worldoils Oil, Gas and Offshore Marketplace    
Worldoils Oil, Gas and Offshore Marketplace

Equipment ID   : 2524
Equipment name   : Backyard Equipment Package - For Sale
Category   : Land Rigs
 
Specifications  :
Backyard Equipment Package for Sale
Telescoping Substructure & Accessories - For Sale
BOP for Sale
Mud Pump for Sale

Section 1 - Substructure & Accesssories
1.1 Telescoping Substructure API 4F 4th Edition
 Rotary capacity : 425,000 lbs
- Setback capacity : 300,000 lbs
- Height : 16’
- Certified plaque engraved with A.P.I monogram 4F 4th Edition, PSL 1, E2/U2
- Four hydraulic rams to raise and lower sub structure
- Two hydraulic rams to raise and lower side floor wings
- Hydraulic controls six valve bank with flow divider
- Install two snub posts in between main hole and mouse hole
- Install BOP handling system for 11” x 5000 PSI stack

1.2 Rotary Table
- Supply and install one 17 1/2”Hecker or American Block rotary table
- Rotary Table c/w split Master bushing and insert bowl.
- Supply and install rotary torque system

1.3 Chain Case for Rotary

- Supply and install drop down chain case from rotary

1.4 Electrical

- Supply and install (three) four foot explosion proof fluorescent lights in cellar area

1.5 T Sill
- Fabricate and supply 40’ t sill with all lugs to support the free standing mast

1.6 Ramp

- Fabricate and supply ramp with 4” welded pump line running down the side

1.7 Paint
- Substructure has been painted gray

Section 2 - Catwalk / V-Door
2.1 Catwalk / V-Door
- Supply 45ft. catwalk with fold up v-door with pipe cut out

Section 3 - Overhead Equipment

3.1 Block/Hook
- Supply 160 ton TSM block / hook combination
- Four each 30” sheaves for 1” drill line

3.2 Swivel

- Supply 150 TON TSM Rotary Swivel
- Swivel c/w Kelly spinner stand
- Quill sub 4 ½” Reg. left hand thread – 6 5/8” Reg. Left

Section 4 - Mud Pump
4.1 Diesel Engine
- Supply (1) one Caterpillar C‐15 series engines rated at 540 HP

4.2 Pump Drive

- Supply and install one Allison OFS 4700 Transmission

4.3 Pump #1

- Supply one new Gardner Denver PZ‐7 mud pump

4.4 Mud Pumps Skid & Accessories

- Total building dimensions to be 37’ long 12’ wide
- Supply one oilfield skid 40’ X 12’ using 4 beam 12”@50 lb
- Install ¾”x 7” strapping on bottom of skid runners
- Cross members 10” @ 33 LB flooring to be 3/16” checker plate
- Supply and install pump with 4” valve, 2” pop valve, 2” bleeder valve and type D
mud gauge
- Supply one precharge pumps 60 hp 6 X 5 X 11 with suction screens
- Fabricate all precharge and suction lines from mud tank
- Fabricate all high pressure lines on skids. Pressure test chart and x‐ray done on all
high pressure lines
- Supply 5000 PSI shock hose in between pump and ramp with integral ends
- Supply one liner wash pump and liner wash tank with plumbing
- Supply one K20 dampener and cross
- Supply and install one diesel day tank with hosing for circulating system

4.5 Electrical
- Supply and install (4) four foot fluorescents in each building
- Supply and install one distribution panel

4.6 Paint

- Mud Pump skid has been painted avocado green

Section 5 - Mud Tank

5.1 Mud Tank Specifications
- Total tank dimensions to be 50’ long 12’ wide
- One oilfield skids 53’ X 7’10” using three beam 12” @ 50 lb.
- Cross members 10” @ 33 lb with 1/4” formed plate flooring
- Walls on tank corrugated 1/4” plate tank perimeter tbg frame
- Fabricate 11 gauge building over top of mixing hopper and pumps
- Fabricate and install hopper door access on side of mix building
- Supply and install exhaust fan
- Fabricate and install two doors on front of mud mix building
- All unions for piping on tanks will be hammer style
- All suction lines will have bridge gate valves and be sumped
- Supply and install 30” poor boy degasser
- Suction lines inside tank 10” for pump and 6” for mixing
- One 4” mud roll line with 2” mud guns
- One 6” hopper lines with buttery fly valves
- One discharge manifold for both pumps

5.2 Tank Capacities
- Pill tank 30 bbls.
- Suction tank 120 bbls.
- Settling tank 105 bbls.
- Settling tank 110 bbls
- Shaker tank 100 bbls.
- Sand trap 10 bbls
- Trip tank 25 bbls.

5.3 Equipment

- One DFTS mud conditioner
- Mud cleaner consist of 16 cone Desilter and 2 cone Desander
- Three MA – 10 hp 380 volt RG mud agitators
- Supply and install five jet guns
- Supply and install single hopper mixing system  
- One 8” X 6” X 14” 60 HP 460 volt overhead motor driven by belts for Mixing pump 
- Two 6” x 5” x 11” 50 HP 380 volt overhead motor driven by belts (Desilter & Desander pumps)
- One explosion proof 10 HP trip tank pump

5.4 Electrical
- Supply and install four fluorescent lighting on telescoping posts
- Supply and install all electrical hard wiring and jumper cords
- Supply and install distribution panel at mixing end of tank
- Supply remote switch for trip tank pump to driller’s panel

5.5 Paint

- Mud tank skid has been painted avocado green

Section 6 - Generators / Combination Building

6.1 Diesel Engine
- Supply Two Caterpillar C‐15 engine rated at 540 HP

6.2 Generators
- Supply Caterpillar generator prime power is (50Hz) 355 kW

6.3 Electrical

- Supply one transfer switch 600 amps
- Supply one 380 Volt panels with pin and sleeve plugs
- Supply one 380/222 panel with pin and sleeve plugs with 100 amp outlet for lease
accommodation shacks
- Supply and install plug box on building for cord ends
- Supply spare starters and plug in for 60 HP and 30 HP
- Supply and install four foot fluorescents inside building
- Supply and install two sodium vapour lights on roof
- Supply all extension cords from gen building to outside support buildings

6.4 Building
- Fabricate triple beam skid 48’ long x 16’‐6” wide from 12” beam
- Install 6” roll ends and cover entire skid with 3/16” checker plate
- Shear, form and stand building 45’ long x 12’‐6” wide x 8’6” high
- Install tubing roof perimeter and sloped roof panels
- Install (3) divider walls inside building for (3) separate rooms
- Supply and install steel doors/frames into each room
- Fabricate 2 ft. wide cable tray on top of combination building
- Install 6x4 bumper posts on both ends of skid

6.5 Lightplant Room

- Lightplant room is 12’ wide x 20” long
- Supply and install (2) two Caterpillar C‐15 – 355 kW, 380V, 3 phase diesel
generators
- Fabricate and install 140 gallon fuel tank in corner of room
- Supply and install Sullivan Palatek 30 hp rotary screw air compressor with 120
gallon tank
- Install hinged door on side of building for electrical cabling access.

6.6 Accumulator Room
- Accumulator room is 12’ 6” long x 12’ wide and 8’ 6”
- Supply and install 4 station 120 gallon Control Technology Accumulator
- 10 each 11 gallon accumulator bottles
- One T‐25 Weatherford triplex charge pump
- Two 8 ½”, 40:1 air pumps

6.7 Paint
- Combination building has been painted gray

Section 7 - Well Control
7.1 Choke Manifold
- Oilfield skid dimensions to be 10’ long 6’ wide.
- Supply one single gut 2” X 3” choke manifold c/w manual choke

7.2 Blowout Preventors
- Supply one 11” 5000 PSI new Cameron Townsend T‐84 double ram preventer with
one set 3 ½” rams and one set of blind rams

7.3 Annular

- Supply one 11” 3000 PSI new Cameron (Townsend) T‐90 Annular

7.4 BOP Accessories

- Supply one 3 1/8” SS flanged 30’ 5000 PSI choke hose
- Supply one adapter spool 11” x 5,000 psi – 11” x 3,000 psi
- Supply one 11” 5000 PSI drilling spool with 3 1/8” outlets
- Supply one 3 1/8” 5000 PSI HCR gate valve (hydraulic)
- Supply and install 3 1/8” 5000 PSI manual gate valve
- Supply two 2 1/16” 5000 PSI manual gate valve
- Supply one 2 1 /16” 5000 PSI check valve
- Supply one DSA 2 1/16” X 3 1/8”
- Supply all studs and ring gaskets

Section 8 - Casing Stabbing Board

8.1 Casing Stabbing Board
- Air operated casing stabbing board

Section 9 - Water/Fuel/Change House Skid

9.1 Water Tank
- Supply 100 barrel skid mounted water tank
- Supply and install two 4 x 3 Centrifugal transfer pumps
- Supply and install discharge and suction manifolds
- Tank will be built from ¼” plate
- Tank access hatch and drain plug

9.2 Fuel Tank
- Supply skid mounted fuel tank 100 barrels
- Supply and install two 3/4 hp 110v fuel pumps 1 ¼” X 1”
- Supply and install discharge and suction manifolds
- Supply one fuel water and solids separator
- Tank will be built from 1/4” plate
- Tank access hatch, drain plug and sight glass

9.3 Change House

- Change room is 12’ wide x 12’ 6” long
- Fabricate and install fold down lunch table
- Supply and install padded bench
- Supply and install 12 change lockers

Section 10 - Kelly Bar & Bushings
10.1 Kelly Bar & Kelly Drive Bushings
- 4 ¼” Hex Kelly 37’ overall c/w shipping scabbard.
- Square Drive Bushing for 4 ¼” Hex Kelly & 17 ½” rotary table

Price & terms : Please enquire using the email form below.       

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
BOP Accessories for sale
Mud Pump Skid & Accessories - For Sale
Substructure & Accessories for Sale
Generators for Sale

----------------------------------------------------------------------------------------------------------
     
Worldoils Oil, Gas and Offshore Marketplace
Worldoils Oil, Gas and Offshore Marketplace - Backyard Equipment Package - For Sale
Images
 
Backyard Equipment for Sale
 
Telescoping Substructure - For Sale
 
Hook for Sale
 
Mud Pump for Sale
 
BOP for Sale
 

To enquire on this equipment, please send an email to

The information contained herein is believed to be accurate but has not been verified. This equipment is subject to prior sale and sold “where-is as-is” with no warranties from Worldoils Pte Ltd or the Seller expressed or implied.
Worldoils Oil, Gas and Offshore Marketplace    
Worldoils Oil, Gas and Offshore Marketplace

 


 

If you cannot find the new or used offshore rigs, vessels or equipment of any type, size or make that you are looking for, please send us an email to and we shall offer you.


.......................................................................
www.worldoils.com |  Disclaimer