Offshore Pedestal Crane for Sale - 300Tons
New 300 tons Offshore Pedestal Crane
Design according ABS Guide for lifting Appliance (2008)-heavy lift
cranes and API2C for offshore pedestal mounted cranes.
ABS plan approval and shop survey.
The crane is outfitted with :
a) Main hoist 300mt SWL with radius of 48 mtr.
b) Whip hoist 30mt SWL with radius of 53 mtr.
c) 10 tons tugger with constant tension.
Whip hoist can be used with Constant Tensioning mode and is
suitable for lifting of personnel (reduced capacity)
Main hoist :
SWL at 11 mtr 300 mt (9 falls) F dynamic 1.33 [-]
Working range :
Minimum radius approx 7,5 mtr.
Maximum radius approx 48 mtr.
Hook travel 9 falls approx 46 mtr.
Hook travel 5 falls approx 86 mtr.
Whip hoist :
SWL 30 mt at all radius (single line) F dynamic 2.00 [-]
Working range :
Minimum radius approx 9,2 mtr.
Maximum radius approx 53,5 mtr.
Hook travel single line approx 100 mtr.
Boom hoist :
Boom hoist time low speed (15 to 76 degrees) approx 6 min.
Boom hoist time high speed (15 to 76 degrees) approx 3 min.
Slewing :
Full revolving
Slewing speed at full load approx 0.36 rpm.
Tugger (optional 1x) :
SWL single line 10 mt.
Hoisting speed at outer layer of drum full load approx 30 m/min.
Hook travel single line approx 60 mtr.
Control Systems :
Overload Protection System.
Over speed detections on winches.
Anti-to-block system
Slack rope protection
Empty drum protection
Remote access system :
The crane is equipped with a remote access system; this system uses the ships
communication system to make a data connection with the main office of the
manufacturers. This allows the manufacturer to monitor the crane in real time
and to help with trouble shooting.
Power consumption :
Approx 500kW.
Electric source AC 440V/60 Hz.
Electric source AC 440V/60 Hz.
Minimum ambient temperature -10 C
Maximum ambient temperature +40 C
Area classification Safe Zone.
Factory Acceptance Test :
After assembly in the workshop the crane will have a Factory Acceptance Test for
function testing of all sub-systems and fine tuning of all sensors
Total weight excl pedestal adaptor approx 200 mt.
Delivery time November 2010
Price Euro 3,350,000.- ex VAT or other business and/or sales cost.
In words: Three million, Three hundred and fifty thousand Euro.
Delivery of the goods as described in the scope of supply is Free Alongside
Ship (FAS) location of manufacturer in Asia.
The crane is built by a European manufacturer.
Price & terms : Please enquire using the email form below.
If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.
We can arrange delivery of equipment and towage of rigs and vessels where needed.
The details mentioned above are believed to be accurate but are not guaranteed.
-------------------------------------------------------------------------------
Search words (for official use only) :
300Ton pedestal Crane in Europe for Sale
Offshore Pedestal Crane of 300T for Sale
New 300Ton Offshore Pedestal Crane for Sale
Pedestal Crane for Sale
European Pedestal Crane for Sale
300T Pedestal Crane in Asia For Sale
--------------------------------------------------------------------------------
|
and we shall offer you.