Landrigs for Sale - Oil, Gas and Offshore Equipments marketplace, Oil & gas equipments

Untitled Document

Search Here

Rig/Vessel/Equipment Name:
Category:
Subcategory:
Buy/Sell/Hire/Need for hiring:
ID:

Browse equipments

No relevant equipments are found in our database.

Search again

Untitled Document

Featured equipments for sale

Crown Duke CE 750 SD Trailer Mounted Drilling Rig

Worldoils Marketplace

Crown Duke CE 750 SD Trailer Mounted Drilling Rig For Sale

ID 2660

Worldoils Marketplace

Worldrigs ID: WR2658

2000HP Electric SCR Rig for sale
Refurbished Electric SCR Rig for Sale

Rated Drilling Depth
23,500 ft, w/(5" D/P#19.5 Lb/ft)

Derrick
Type : Superior
Gross Capacity : 1,470,000 Lbs
Max. Hook Load : 1,100,000 Lbs
Height : 141 ft

Draw Works
Type : JC70D
Input Power : 2,000 HP
Max. Fast Line Pull : 100,000 Lbs
Drilling Line : 1 1/2" L.H. (12 Lines)

Rotary
Type : ZP-275
Max. Opening : 27 1/2"
Rotary Speed : 300 RPM
Height : 32 ft

Mud Pumps
No. : 2 EA
Type : F-1600
Input Power : 1,600 HP/EA
Max. Pressure : 5,000 Psi

TOP drive
Make/Type : Varco TDS-11S
Rated Load Capacity : 1,100,000 Lbs
Rotating Speed : 228 RPM

Power Supply
SCR System
- 4 EA CAT3512 Gensets (SCR)
- 2 EA Volvo TAD1631GE Generator (Main Camp)
- 1 Volvo TWD740GE Generator (Emergency)
- 1 EA Cat3406 Generator (Fly Camp)

Well Control Equipment
Diverter System:
- (21 1/4" x 2,000 Psi) Bag Type Preventer
- Drilling Spool
- 10” Vent Line w/ Hydraulic Ball Valve

BOP Stack:
- (13 5/8" x 5,000 Psi) Annular
- (13 5/8” x 10,000 Psi) Double Ram + Single Ram

Mud System
Total Mud Tanks Capacity : 2220 BBL
Shale Shaker Tank : 427 BBL
Suction & Slug Tank : 503 BBL
Mixing Tank : 377 BBL
Reserve Tanks (2) : 913 BBL
Trip Tank : 86 BBL
Slug Tank : 116 BBL
Water Tanks : 400 BBL

Camp
To accommodate 86 Persons
- 1 EA Kitchen
- 2 EA Mess Hall 1 EA Dry Food Storage
- 1 EA Cold Food Storage
- 1 EA Clinic
- 1 EA Recreation Room
- 2 EA AC Generators for Lighting

HSE
The Rig is fully equipped w/ fire fighting system
Diesel Motor Driven Fire Pump, Fire Blankets & Suits

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
--------------------------------------------------------------------
Search words (for official use only) :
2000HP Electric SCR Rig for sale
Refurbished Electric SCR Rig for Sale
Used Land Rig for Sale
SCR Rig - 200HP - For Sale
Land Drilling SCR Rig for sale
--------------------------------------------------------------------

2000HP Electric SCR Rig for sale

ID 2658

Revamped and certified 2000 HP Land Rig for Sale

Worldoils Marketplace

2000HP VFD Land Drilling Rig for Sale

ID 2657

Chicago Pneumatic Used Drilling Rig for Sale

Worldoils Marketplace

Drilling Rig - Chicago Pneumatic T650 - For Sale

ID 2692

Drilling Rig - Service King 1000 HP for Sale

Worldoils Marketplace

Worldrigs ID: WR2654

Service King 1000 HP Drilling Rig for Sale
Drilling Rig - Service King 1000 HP for Sale

Description :

Crown, (4) Sheave McKissick, 1 ¼”,
Date : 1/ 2012,
SHL : 450,000#
S/N: DK504, Cluster Model : 744-1, 1 1/8” Line, 36” Sheaves,
Fast Line Model : 741-1, 1 1/8” Line, 42”, 40 Tons,
Sand Line Model : 741-1, 1.12” Line, 30” Sheave, 40 Tons
Dead Line Anchor Model : 741-1, 1 1/8” Line, 30” Sheave

Carrier, (5) Axel / Trailer Mount, Model 1000,
SK#: 395T, Gross Weight:, 177,900 Lbs.,
Date: 3/2012, VIN: 1S90TDD85CL976333, (1) Sand Line Reel
(1) Electric Drive Hydraulic Pump,
(2) Oil Saver Hydraulic Filters

Engine # 1, Detroit 2010 Model, 14.0 Litre,
Allison Transmission, S/N: 06R1049132

Engine # 2, Detroit 2010 Model, 14.0 Litre,
Allison Transmission, S/N: 06R1049335

(1) Hydraulic Tank – 350 Gallons

Drawworks, Model:

46 x 10, S/N: DW 2387, Transmission,

Model: 1000, S/N: 5962350
S/N: 5962688, Power Drive Gear Box: 2.47 x 1,
Dual Actuated Air Band Brake, Hydraulic Drum Brake,
Air Actuated Crown Saver, (2) Hydraulic Cat
Heads – Make Brake, (1) Drillers Console

Mast, Model :

117ft, SHL 450,000#, S/N: DK 504,

(3) Hydraulic Raising Cylinders
Built in Top Drive Torque Track, Kelly Hose, Stand Pipe 5000 PSI
with 5000 PSI Type D MSF Mud Gauge S/N: 41814, (3) 5000 PSI
Oteco Shut Off Vales, (2) 250 Ton Bails – 79” Long,
Finger Board – (22) Fingers, (1) Sentry Block / Hook
Combo Model SI-BH-250, 36” Sheave Size Line 1 ¼”, S/N: 07054,
Date: 2007, (2) Air Hoist Lines, Fully Rigged for Safety Cable,
Number of Raising Cylinders = Number of Extensions

Mud Pits :
(2) Pit System – 950 BBL

Shaker Pit (2) Compartments, (2) Swaco Mongoose Shakers,
S/N: PF 2664, S/N: PF 2663, (1) Mongoose Mud Cleaner with
Desander Model: 2-12, S/N: 21963, S/N: 4500732 / Desilter,
Model: 6T4, S/N: 23043, (1) 5 Star 6 x 5 x 14 Cent Pump p/b
50 HP Electric motor

Suction Pit, Full Set of Pit Lights, (2) Caustic Barrels,
(4) 10 HP Agitators (4) Compartments, (2) Prime Mud Movers –
Mission Magnum 6 x 5 x 14 ea p/b 50 HP elec motors

Water Tank :
500 BBL, (2) 25HP Mission Water Transfer Pumps x 4RS,
(2) Compartment Chemical Pit

Gas Buster, Swaco, Model: 2011, 4ft x 10ft, 6” Outlets,
6” Inlets, S/N: MGS-M-118 Skidded

Choke Manifold, (6) 4 x 5M, MGV – HECI, (1) 2 x 5M, MGV – HECI,
(1) 2 x 5M Manual Choke – HECI, 3 Way Watermelon

Pill Pit, (1) Five Star 6 x 5 x 14 Cent Pump p/b 50HP
elec motor w/(1) Hopper

Mud Pump #1, SLF 1300, Engine: Cat 399B PCTA, Date: 12/23/2011,
S/N: 35B06278 Torque Converter, Oil Works, Model: C-300-100,
Type E, S/N: 1600, Five Star Charge Pump, 6 x 5 x 14 p/b 50HP
Electric Motor –, (1) 5000PSI Pulsation Dampener, (1) 5000PSI
Emergency Pop Off – Odrill, (2) 5000PSI Gate Valve - Oteco
(3) SLF 1300 Modules

(1) Mud Pump Center Skid with Frogs, Miscellaneous Basket,
Rig Mats (Table Mats)

Mud Pump #2, SLF 1300, S/N: KMI 01, Engine: Cat 399 PCTA,
Date: 05/ 2011, S/N: 35B4092, Torque Converter, Oil Works,
Model: C-300-100, Type E, S/N: 1600, Five Star Charge Pump,
6 x 5 x 14 p/b 50HP Electric Motor –, (1) 5000PSI Pulsation
Dampener, (1) 5000PSI Emergency Pop Off – Odrill, (2) 5000PSI
Gate Valve – Oteco (3) SLF 1300 Modules

(1) Top Dog House with Tools, (2) BJ Elevators, (2) Tongs,
(3) Slips, (2) Drill Pipe Slips, (4) Mud Wipers, (4) Sets
of Pit Stairs, Spare Tong Heads, (1) Hydraulic Accumulator
Suit Case

BOPs :
(1) 11” 5M Annular – Hydril GK
(1) 11” 5M Double – Shaffer Style
(1) 11ft 5M Mud Cross with Wing Valves

Top Drive :
Venture Tech 250 T w/ (1) Top Drive Service Loop, (1) Bottom
Half for Top Drive Torque Track, Hydraulic Top Drive House p/b
(2) Detroit 60 Series (14.0 Litre), has “Dan Voss” Hydraulic
Drive Pump System – (2) Pumps ea (4) Outlets ea, (1) Bug Blower

(1) Basket with (6) Crossover Subs

Junk Basket, Floor Hand Rails, Flow Line Skid with hoses,
(2) Oteco Valves, Miscellaneous Flow Line Plumbing,
(1) 4ft x 20ft V Door, (3) Saver Subs, (1) Crossover Sub

Accumulator :
Advanced Pressure Inc., (12) Bottles, 5 Station, 3000PSI System,
S/N: 11871, (2) 55 to 1 Air Pumps, (8) Steel Flex Accumulator
Lines, (1) Pressure Washer Power Swivel, Venture Tech,
Model: XK 250 Ton

Generator House :
Genset # 1, Engine: 12V 2000, Generator: Kohler – 450KW,
Model: Power Systems 600
Genset # 2, Engine: 12V 2000, Generator: Kohler – 450KW,
Model: Power Systems 600
(1) Screw Compressor – Gardner Denver, Electra Saver,
Model: EBE 990, S/N: S334319

Mud Boat – Main Section, 60ft Long x 10ft Wide (4) 12” Beams
Mud Boat – Extension, 17ft 3” Long x 11ft Wide

Substructure, 35ft Long x 11ft Wide

Rotary Table, Sentry – 20.5”, Date: 2007, S/N: 074102

(1) Rotary Angle Gear Box
(1) 40ft Parts House with Divider
(1) Wire Line 15,000 x .092 – Five Star
Consumables

Camp Transformer – 6 Outlets

Location : USA

Service King 1000 HP Drilling Rig - For Sale

ID 2654

Worldoils Marketplace

Worldrigs ID: WR2653

NOV Rapid Drilling Rig for Sale
1500 hp Rapid Drilling Rig for Sale

Description :

Substructure :
NOV - Slingshot type (2 piece)
Clearance : 20ft with 18ft of clearance
Capacity : 500,000# loading
Six well skidding system

Mast :
NOV - Telescoping
Height : 80ft
Capacity : 500,000#
Winch & Gin Pole : 5,000#

Drawworks :
NOV - SSGD 250 (disc brakes)
Rating : 1500- hp
Capacity : 500,000# on eight 1¼” lines.
Motor : Baylor AC

Top Drive :
NOV - TDS 10R
Rating : 250 ton
Torque Capacity :
36,500 ft/lbs intermitting
20,000 ft/lbs @ 98 rpm continuous
9730 ft/lbs @ 182 rpm continuous

Drillers Cabin :
NOV - Purged
Amphion Controls

Pipe Handling :
Iron Roughneck - NOV ST - 80R
Range : 4¼” to 8½”
Torque Capacity :
60,000 ft/lbs make up
80,000 ft/lbs brake out
BX - 450 Elevators (250 ton)
Range : 2 7/8”, 5”,7”, 95/8” & 13 3/8”.
PS - 21 Slips (250 ton)
Range : 2 7/8”, 5”, 7”, 9 5/8” & 13 3/8”.
Erector arm, pipe funnel and pipe rack wings.

Mud System :
Mud Pumps - 2 NOV F-1600
Rated : 1,600 hp.

Discharge manifold & Suction skid

Stand Pipe :

5”, 1002

Mud Pits (covered)
Capacity : 625 bbls
Mixing System & skid
Shale Shakers : 2 Derrick
Trip tank : Two 25 bbl tanks & pumps
Rolling Flow Line System (15ft spacing)

BOP Equipment :
11” X 5m Shaffer Annular (flanged)
11” X 5m Shaffer Double Ram (studded)
11” X 5m Mud Cross (flanged with 3 1/8” outlets)
Re-certified by OEM
Choke Line :
3 1/8” X 5m HCR Valve
3 1/8” 5m Manual valve (replace)
3 1/8 Coflex hose :
Three - 15ft - 3 1/8” flanged choke lines
10ft - 3 1/8” flanged choke line
Four - 3 1/8” studded Tees with one filled blind flange
Kill Line 2” Coflex hose
Two : 3 1/8” X 5m manual valves (replace)
Check Valve :
NOV Hydraulic Handling System
3 1/8” X 5m Choke Manifold (hydraulic & manual chokes)
Gas Buster
Flare Stack & line

Power :
Two 3512C Caterpillar Engines
Rated : 1476 hp @ 1200 rpm
Two Baylor Generators
Rated : 1750 kVa, 600 volts / 60 HZ
NOV VFD & MCC
Bi-fuel System

Drill Pipe :

370 jts - 5” 19.5 #/ft., NC 50

Inspected by Drilco
Critical Capital Spares :
F-1600 Mud Pump
Baylor 1750 kVa Generator (for repair)

Winch – 5,000#

Hydraulic Cylinders :
Substructure Raising (repairing NOV)
Derrick Raising (repairing NOV)
Derrick Scoping (repairing NOV)
BX 450 Elevators
PS 21 Slips

Skid System Description :

Applied Machinery Corporation custom built skidding system.
Capable of 75ft skidding.
Key description :

Rig Skid System :

12” Elevated Skid
Draworks Skid Section
Starter Skid Section (ODS/DS X 43ft)
Standard Skid Section (ODS/DS X 15ft)
Log of Pins, Spreaders, and Claws
AMC Hydraulic Drill Line Spooler
Festoon Track

Hydraulics :
2 Hydraulic Cylinders
10” Bore X 25” Stroke
3,000 psi Working Pressure
Associated Hoses and Fittings

Festoon :
8ft X 35ft X 12” Master Skid
Capable of supporting a 75ft Skid
4” Integrated Track and Roller for Festoon and Grasshopper

Shaker and Flowline Header :
10” “Mona-Flow” line with fittings and jets
Rolling capability to support skids
Trip Tank and mud bucket hoses

Rig Load List

Single Well Pad	Loads	3 Well Pad
Shaker Pit	1	Shaker Pit
Suction Pit	2	Suction Pit
Trip tank & Choke Manifold	3	Trip tank & Choke Manifold
F- 1600 Mud Pump	4	F- 1600 Mud Pump
F- 1600 Mud Pump	5	F- 1600 Mud Pump
Utility Skid	6	Utility Skid
3512 Caterpillar Gen Set	7	3512 Caterpillar Gen Set
3512 Caterpillar Gen Set	8	3512 Caterpillar Gen Set
Air Compressor Skid	9	Air Compressor Skid
VFD	10	VFD
Festoon & Grasshopper	11	Festoon & Grasshopper
Fuel Tank	12	Fuel Tank
Rig Water Tank	13	Rig Water Tank
Drawworks / Koomey	14	Drawworks / Koomey
Substructure	15	Substructure
HPU Skid & Grasshopper	16	HPU Skid & Grasshopper
Drillers Substructure	17	Drillers Substructure
Drillers Cabin	18	Drillers Cabin
Drill Line Spool	19	Drill Line Spool
2 Pipe Wings	20	2 Pipe Wings
2- Pipe Wings &Arm	21	2- Pipe Wings &Arm
Flow line, Pipe Handler, CoFlex	22	Flow line, Pipe Handler, CoFlex
Flare Box & Line	23	Flare Box & Line
2 sets Pipe Racks	24	2 sets Pipe Racks
2 X Hose Baskets	25	2 X Hose Baskets
Drill Pipe: 5" , 19.5 #/ft	26	Drill Pipe: 5" , 19.5 #/ft.
Drill Pipe: 5" , 19.5 #/ft	27	Drill Pipe: 5" , 19.5 #/ft.
Drill Pipe: 5" , 19.5 #/ft	28	Drill Pipe: 5" , 19.5 #/ft.
Pipe Bunks X 4	29	Pipe Bunks X 4
Tool / Nipple House	30	Tool / Nipple House
Hydraulic Shop	31	Hydraulic Shop
Parts House	32	Parts House
BOP in Cradle	33	BOP in Cradle
Stairs & Porches	34	Stairs & Porchesin Cradle
Mats X 5	39	Mats X 5
	44	Flow Line X 2
	48	Skid System X 4

Price & terms : Please enquire using the email form below.

NOV Rapid Drilling Rig for Sale

ID 2653

Worldoils Marketplace

Worldrigs ID: WR153

OIME 3000 HP SCR +/- 30,000' Drilling Rig

Details are in the below picture

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------
Search words :
OIME 3000 Drilling Rig for Sale
3000 hp Drilling Rig
3000hp land rig
3000 hp Oil Drilling Rigs
3000 hp oil rig
--------------------------------------------------------------

Drilling Rig - OIME SCR 3000 HP - For Sale

ID 153

Worldoils Marketplace

Worldrigs ID: WR599

Speedstar 30K Drill Rig for Sale
1989 Built Speedstar 30K Drill Rig

Model : Speedstar
Manufacturer : 30K Drill Rig
Year : 1989
Condition : Used

Description

1989 Speedstar 30K Drill Rig
CAT 3408-C Diesel Deck Engine (2 years since installed and 2300 hours)
Sullair 900/350 CFM newly (rebuilt with 1 hour since)
18,000 lbs main winch
2000 lbs Sandline
Pipe Spinner
Mounted on a 1989 Ford L 9000
CAT 3406B Diesel Engine
Transmission: Road Ranger RTO 14708LL 8 Speed
Miles: 125,139
(20' x 3.5") & 600' ft of Drill Pipe
6 pipe non-mounted carosel
Mounted on a 1989 Ford L 9000 Truck

Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------
Search words (for official use only) :
Speedstar 30K Drill Rig for Sale
Used Drilling Rig Speedstar 30K Drill Rig
Speedstar 30K Drill Rig for Sale in USA
1989 Built Speedstar 30K Drill Rig for Sale
Land Drilling Rig - Speedstar 30K
-------------------------------------------------------------------------------------

Speedstar 30K Drill Rig -1989 Built - for Sale

ID 599

Worldoils Marketplace

Worldrigs ID: WR603

Texoma 500 Foundation Drilling Rig for Sale
Used Oilfield Drilling Rig Texoma 500

Model : 500
Manufacturer : Texoma
Year : N/A
Condition : Used

Description
Texoma 500 drill rig
30' foot drilling depth
3" Kelly bar
453 Detroit Diesel Deck Engine - 3,850 engine hours
Funk Hydrostatic transmission - 4 speed
right angle drive rebuilt
refurbished brass in final drive
280 degree turntable

4 outriggers
service winch - Ramsey J-10
Mounted on a 1980 International Paystar 5000 Model F-5070 (6X6 wheel drive)
Detroit 6V71 Diesel Engine
Eaton Fuller RT00-9513 - 8 Speed Transmission
169,650 Miles on gauge
Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

------------------------------------------------------------------------------
Search words (for official use only) -
Texoma 500 Foundation Drilling Rigs for Sale
Used Texoma Drilling Rig for Sale
Texoma Foundation / Caisson Rigs for Sale in USA
Oilfield Texoma Drilling Rig for Sale
Texoma 500 Caisson Drilling Rig for Sale
Texoma 500 Used Drilling Rig for Oilfield
------------------------------------------------------------------------------

Texoma 500 Used Drilling Rig - For Sale

ID 603

Worldoils Marketplace

Worldrigs ID: WR646

Schramm T64HB Drill Rig for Sale
Schramm Used Drilling Rig For Sale

Model : T64HB Drill Rig
Manufacturer : Schramm
Condition : Used

Description :

Schramm T64HB Drill Rig
Serial Number T64HB-472
425 cfm / 250 psi Air Compressor
Detroit 8V71N Diesel Deck Engine
Pipe Rack
3 hydraulic leveling jacks
Mounted on International Fleetstar 1910 A truck p/b Gasoline Engine

Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Schramm T64HB Drill Rig for Sale
Schramm T64HB Used Drill Rig For Sale
Schramm Used Drilling Rig For Sale
Land Drilling Rig For Sale
Schramm T64HB Drill Rig in USA
-------------------------------------------------------------------------------------

Schramm T64HB Drill Rig for Sale

ID 646

Worldoils Marketplace

Worldrigs ID: WR623

SCR Land Drilling Rig for Sale
Land Drilling Rig - 2000hp SCR - Chinese made
New 2000hp Land Drilling Rig (Chinese)

General description :
Rig type : ZJ70
Rig rated dept : 6000m (127mm DP) ~7000 (114mm DP)
Traveling system : 6 x 7 (sheaves), parallel
Available height of derrick : 150 ft
Rig floor dimension / height of drilling floor : 42ft x 40ft / 30ft
Opening diameter of rotary table : 952.5mm (37 1/2 inch)
Rated input power of drawworks : 2000 hp or 1470kW
Capacity of mud pump : 3 x 1600 hp
Power transfer type : AC-SCR-DC

Drilling equipment :
Mast :
Model : JJ450/45-K :
Type II consist of five sections, 150 ft clear height
Top span (front x side) 2.2 m x 2.2 m
Bottom span 9 m
Max hook load 4500 kn or 1,000,000 lbs

Drawworks :
2000 hp or 1470 kW
Driven by two DC motor
Max pull fast line : 485 kn (110,000 lbs)
Wire rope : 38mm
Air cool hydraulic disc brake : PS80

Crown block :
Model : TC450
Max hook load : 4500 kn (450t)
OD of sheave : 1524 mm
Diameter of drilling line : 38mm
No of sheaves : 6+1

Traveling block :
Model : YC450
Max static load : 4500 kn (450t)
OD of sheave : 1524mm
No of sheave : 6

Rotary table :
Model : ZP375
Table opening diameter : 37 1/2"
Max static load : 5850 kn
Max speed : 300 rpm
Rate power : 600 volt
Gear ratio : 3.56

Top drive :
Model : NOV/TDS-11SA/Electrical/800 hp
Hoisting capacity : 500 t
Output torque continuous : 37,500 ft-lbs (800hp)
Tool torque (intermittent @ stall) : 55,000 ft-lbs
Max speed : 228 rpm
Drilling motor : AC 575 VAC (2 x 400 hp)
Make up torque : 47,000 ft-lbs
Break out torque : 55,000 ft-lbs

Mud pumps :
Model : HHF-1600
Input power : 1600 hp (1176 kW)
Max cylinder diameter : 7" or 180mm
Length of stroke : 12" or 305mm
Rate no. of stroke : 120 spm
Three triplex single acting piston, HHF-1600

Solid control :
Shale shaker : Derrick FLC-503/rated 60L/s
Desander : DSV-10-3/rated 1280 gpm
Desilter : S-416-S/rated 1280 gpm
Mud cleaner : Derrick FLC-503-3P

Mud tank : 2,500 bbls

Generator :
Type : SR4B
No. of gen. : 04 set (01 back up)
Capacity : 1750 kva
Rate voltage : 600 vac

AC distribution / transformer :
ABB, transformer SUNTEN/ SC B9-1600, 600 vac/380 vac

Emergency generator : 1 set CAT C15
Diesel : 4 set CAT3512

BOP's stack :
21 1/4" BOP 2,000 wp including :
01 annular 5,000 wp
01 double ram 2,000 wp
13 5/8" BOP 10,000 wp including :
01 annular 5,000 wp
01 double ram 10,000 wp
01 single ram 10,000 wp
Comply with lifting BOP swl : 2 x 25 ton

Warranty :
Guarantee period shall last for 18 months counting from the delivery date
or 12 months from the commencement of operation at the well site,
which expiration date comes earlier.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

------------------------------------------------------------------------------------------------------------
Search words(for official use only) -
SCR Land Drilling Rig for Sale
New 2000hp Chinese Rig
2000hp new Land Rig From China
New 2000hp Chinese Drilling Rig
2000hp Land Drilling Rig From China
Chinese 2000HP SCR Land Drilling Rig
Chinese Rig Builders
Chinese 2000hp Land Rig Builders
--------------------------------------------------------------------------------------------------------------------------

SCR Land Drilling Rig (Chinese) - 2000hp - for sale

ID 623

Worldoils Marketplace

Ingersoll-Rand T4W Drilling Rig - 1981 Built - For Sale

ID 1383

COOPER ITO 250 Double (3000m) - Workover Rig For Sale

Worldoils Marketplace

Worldrigs ID: WR396

Workover Rig US made for sale - Cooper LTO 250 Double
Used workover Rigs in USA For Sale

Description
Cooper LTO-350 model, 3810 X 3808 drum size
Self propelled, double drum, back in, 4 axel carrier
3600m – 73mm tubing capacity rating
DDEC, Series 60 – 12.7 L 475 hp engine
Allison CLT5860 6 speed transmission
25.4cm X 96.5cm main drum breaks
20.3 X 96.5 sand line breaks
Pemco 104-205 31m mast rated 91 dNa
with stung 6 lines
3600m of 73mm tubing racking capacity
McKissick 83A-100 ton travel blocks
3 X 61cm sheaves 25.4mm drill line
Vapor proof florescent & sodium lights
25.4 mm X 300m drill line
14mm X 3000 m sand line
Hydraulic Martin Decker Clipper weight
indicator
Dual winches

Combination
3 compartment steel skidded building
3m W X 12m L
John Deer 75kw generator

Handling Equipment
Foster 58-93R tubing tongs
Advance Model C air slips
BJ-90-TA-100 ton X 73mm, BJ-90-TA-65 ton X 60.3mm elevators
73mm & 60.3mm standard tubing sizes
19mm – 25mm rod sizes
2 – 2.4m X 13.7m & 1 – 2.4m x 5m rig mats
1.25m L X 12.5m L c/w 2 sets hinged pipe catwalk racks
Safety Equipment

Safety Equipment
4 – 14kg dry chemical fire extinguishers
4 self-contained Scott Air pack breathing apparatuses c/w 2 spare bottles
LeL monitor & 6 personal monitors gas detector
Safety & directional signs
Electrical ground bonding equipment
Basket stretcher c/w spine board, rescue slings & blankets
Crown saver
2 self-retracting life lines

BOP Equipment
Class III
Hydril type, double gate, 152mm X 35mpa pressure rating & Hydril GKC,
152mm X 35mpa Wagner 4 accumulator station, 250 L 21mpa rating c/w
operators controls & N2 backup mounted in skidded combination building
2 -73mm X 35mpa safety valves 89mm rod BOP
152mm kill spool c/w 50mm X 21mpa wing valve
76mm X 9m swab lubricator c/w jars and tool trap
76mm X 21mpa swabbing valves

Pump
Skidded steel heated building
National JWS-340 triplex 102mm plungers X 127mm stroke
John Deer Model 6125H 12.5L
350 hp engine
Eaton 10 speed transmission
Mission Magnum 127mm X 152mm charge pump
6 – 50mm X 35 mpa Oteco manifold

Mud Tank
38m3 two compartment mud tank c/w stairs, railings, mix hopper, mud guns,
settling trough, steam coil lighting & wind flag
120m X 50mm X 35mpa line pipe
12m X 10cm suction hose
Circulation degasser

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------
Search words(for official use only) :
Workover rig in USA for Sale
American workover rigs for sale
Used American Rigs for Sale
Used Workover Rigs for Sale
Good and Used Workover rigs
---------------------------------------------------------

Workover Rig- Cooper LTO 250 Double (3000m) - For Sale

ID 396

375 HP Four Axle Carrier Mounted Workover Rig

Worldoils Marketplace

Worldrigs ID: WR397

Workover Rig - 375 HP - Four Axle Carrier Mounted
Carrier Mounted Workover Rig For Sale

4 Axle carrier 96' 180,000# Derrick
Detroit series 60 Tier II 12.7 L
4500 OFS Allison transmission
Drawworks with disc assist, 375 hp right angle gear box
38x10-38x8 Double drum
Hydraulic raised and scoped
4 Hydraulic leveling jacks
Derrick boards fully automatic
Front end -20,OOO#EACH/40,000#
Rear end -23,000#EACH/46,000#
25,000# TAG~LE
Front tire size 38565R22.5
Rear tire size 11R22.5

10% down payment required before coverting to a final invoice before paint.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

------------------------------------------------------------------------------
Search words :
Workover rig in USA for Sale
American workover rigs for sale
Used American Rigs for Sale
Carrier Mounted Workover Rigs for sale
Used Workover Rigs for Sale
Good and Used Workover rigs
------------------------------------------------------------------------------

Workover Rig - Four Axle Carrier Mounted - 375 HP - for sale

ID 397

Ingersoll-Rand ECM 370 Crawler Drilling Rig for Sale

Worldoils Marketplace

Ingersoll-Rand ECM 370 Crawler Drilling Rig - For Sale

ID 1202

Worldoils Marketplace

Worldrigs ID: WR2635

LTI 1000KP Drilling Rig
Drilling Rig - LTI 1000KP 2000Hp - For Sale

Description :

General Description :
Make : Lee C Moore
Estimated Drilling Depth : 20,000ft
Estimated Rig Move Loads : 75
Estimated Camp Move Loads : 20
Rated HP : 2000

Mast :
Height : 147.00ft
Static Hook Load Capacity : 1,000,000lb
Mast Racking Capacity : 20,800ft

Substructure :
Style : Parallelogram
Height : 30.00 ft
Clear Height : 25.25 ft
Casing Capacity : 1,000,000lb
Maximum Setback Load : 600,00lbs

Drawworks :
Make : LeTourneau
Model : LDW 1000k
Power Rating :2000hp

Input Power :

2 ea Oilfield

Electric

Marine Inc
TT 1500
Drilling Line Size : 1½"
Brake Type - Band or Disk : Disk

Top Drive / Power Swivel :
No Top Drive

Swivel :
No Swivel

Rotary Table :

Make :

LeTourneau

LW-375

Table Opening : 37 ½"
Maximum Load Rating : 650 Ton

Power Generation :
No Engines
No Generators
SCR / VFD / DC /DC : VFD Rig

Mud System :

@ 120 spm
Pressure Rating : 7,500 psi
Active Mud Volume : 590 bbls
Reserve Mud Volume : 460bbls

Shale Shakers :

3 ea Axiom

Process Ltd.
Mud Cleaner : N /A
Desander : N /A
Desilter : N /A
Centrifuge : N /A

Well Control :

Controls
8 stations
3,000 psi

Enhancements :

Power Slip Frame :

Access Oil

LTI 1000KP Drilling Rig - 2000Hp - For Sale

ID 2635

Chicago Pneumatic 650 S/S Drilling Rig for Sale

Worldoils Marketplace

Chicago Pneumatic 650 S/S Drilling Rig - For Sale

ID 2629

Trailer Mounted Telescopic Mast, Double Rig for Sale

Worldoils Marketplace

Worldrigs ID: WR2655

Trailer Mounted Telescopic Mast, Double Rig for Sale

Used Trailer Mounted Drilling Rig - For Sale

Description :

General Description :
Make : Victory
Year Built/Rebuilt : 2009
Estimated Drilling Depth : 12,000 ft
Estimated Rig Move Loads : 48
Estimated Camp Move Loads : 22
Rated HP: 850

Mast :
Height : 105.00 ft
Static Hook Load Capacity : 350,000 lbs
Mast Racking Capacity : 12,000 ft

Substructure :
Style : Telescoping Mounted on Trailer
Height : 20.00 ft
Clear Height : 17.00 ft
Casing Capacity : 440,000 lbs
Maximum Setback Load (lbs) : 375,000

Drawworks :
Make : TSM
Power Rating : 850 hp
Input Power :
1 ea General Electric
GEB 22 A3
Brake Type - Band or Disc : Disc
Drilling Line Size : 1 1/8"
Auxillary Brake : TSM 236H SSB 90#RL W/CVCP

Top Drive / Power Swivel :
Make : Victory Rig Equipment
Model : VRT200H
Capacity : 220 Ton
Torque - Continuous : 16,000 ft-lb

Swivel :
No Swivel
Make : TSM
Model : TSM 200
Capacity : 200 Ton

Rotary Table :
Make : TSM 17.5
Table Opening : 17 ½"
Maximum Load Rating : 150 Ton

Power Generation :
Engines : 3 ea Caterpillar C 32
Generators : 3 ea Caterpillar SR 4 B
SCR / VFD / DC/DC : VFD Rig

Enhancements :
Forklift : Caterpillar 930 H
Iron Roughneck : NOV ST-80 C
Mud System :
Mud Pumps :
2 ea Weatherford Oil Tools MP-10
1,000 hp @ 140 spm
Reserve Mud Volume : 0bbls
Model : TSM 850
Pressure Rating : 5,000 psi
Active Mud Volume : 905 bbls
Power Rating :
Shale Shakers : 2 ea MI Swaco Mongoose
Mud Cleaner : N/A
Desander : Brandt 10" X 2 Cones
Desilter : Brandt 5" X 16 Cones
Centrifuge : N/A

Well Control :
Annular :
11" 5,000 psi, Doyles Valves,
Single Ram Preventer :
11" 10,000 psi, Doyles Valves, Type-U
Double Ram Preventer :
11" 10,000 psi, Doyles Valves, Type-U
Choke Manifold :
Weatherford Oil Tools
4 1/16"" 5,000 psi
BOP Closing Unit :
T3 Energy Services
6 Station 3,000 psi

Location : Mexico

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------------------
Search words (for official use only) :
850HP Trailer Mounted Telescopic Mast Drilling Rig
2009 Built Trailer Mounted Telescopic Mast Rig for Sale

Land Drilling Rig - Trailer Mounted for Sale

2009 built Telescopic Mast, Double Rig for Sale

Used Land Drilling Rig for Sale

-----------------------------------------------------------------------------------------------

Trailer Mounted Telescopic Mast, Double Rig - For Sale

ID 2655

Worldoils Marketplace

Worldrigs ID: WR2626

Cooper Drilling Rig for Sale
Drilling Rig - Cooper 350 Hp - For Sale

Description :

General Description :
Make : Cooper
Estimated Drilling Depth : 5,000ft
Estimated Rig Move Loads : 38
Estimated Camp Move Loads : 35
Rated HP : 350

Mast :
Height : 104.00ft
Static Hook Load Capacity : 176,000lbs
Mast Racking Capacity : 3,600ft

Substructure :
Style : Telescoping
Height : 12.92 ft
Clear Height : 9.82 ft
Clasing Capacity : 176,000lbs
Maximum Setback Load : 132,00lbs

Drawworks :
Make : Cooper
Model : 4210-3808
Power Rating : 350 hp

Input Power :

1ea

Caterpilla
D 3406
Drilling Line Size : 1"

Auxillary Brake :

Parmac 122

D631974-X

Top Drive / Power Swivel :
No Top Drive

Swivel :
Make : Upetron
Model : CH 125
Capacity : 125 Ton

Rotary Table :
Make : Ideco 17.5
Table Opening : 17 ?2"
Maximum Load Rating : 150 Ton

Power Generation : Mechanical Rig

Mud System :

Mud Pumps :

1 ea

Gardner Denver
1PY-172
Power Rating : 1000hp @ 130 rpm
Pressure Rating : 5,000 psi
Active Mud Volume : 906 bbls
Reserve Mud Volume : 101bbls
Shale Shakers : 1 ea Upetrom
Mud Cleaner : N / A

Cooper Drilling Rig for Sale

ID 2626

MD Cowan Trailer Mounted Drilling Rig for Sale

Worldoils Marketplace

Worldrigs ID: WR2621

MD Cowan Trailer Mounted Drilling Rig for Sale

1000hp MD Cowan Trailer Mounted Drilling Rig - 2009 Built

Description :

General Description :
Make : MD Cowan
Year built / rebuilt : 2009
Est. Drilling Depth : 10,000 ft
Estimated Rig Move Loads : 30
Estimated Camp Move Loads : 3
Rated HP : 550

Mast :
Height : 72 ft
SHL Load Capacity : 500,000lbs
Mast Racking Capacity : Lay down

Substructure :
Style : Box
Height : 14.80 ft
Clear Height : 10.60 ft
Casing Capacity : 500,000lbs

Drawworks :
Make : Rig Tech
Power Rating : 1000 hp
Input Power : 1 Cat C15
Brake type : Band
Drilling Line Size : 1 -1/8"
Auxillary Brake : Eaton AirFlex
WCBD

Top Drive :
Make : Venture Tech
Model : XK-250
Capacity : 250 Ton

Power Generation :
Engines : 1 Cat C-15
Generators : 1 ea Cat SR 4 B

Mud System :

Mud pumps :

2 Hong Hua

HHF-1000
1000 HP @140 SPM
Model : RT 400B
Pressure Rating : 5,000 psi
Active Mud : 700 bbls

Shale Shakers :

2 es Derrick FLC 504

10"x 3 Cones
Mud Cleaner : N/A
Desander : Derrick

Desilter :

Derrick

4"x 16 Cones

Well Control :

6 Station 3,000 psi

Enhancements :
Fork Lift : Caterpillar 930 H

Iron Roughneck :

Blohm & Voss

MD Cowan Trailer Mounted Drilling Rig for Sale

ID 2621

TSM 850 Trailer Mounted Drilling Rig for Sale

Worldoils Marketplace

Worldrigs ID: WR2620

TSM 850 Trailer Mounted Drilling Rig for Sale
850 hp Trailer Mounted Drilling Rig for Sale

Description :

General Description :
Make : Victory
Year built / Rebuilt : 2009
Estimated drilling depth : 12,000 ft
Estimated rig move loads : 48
Estimated camp move loads : 4
Rated HP : 850

Mast :
Height : 105.00 ft
Static Hook Load Capacity : 350,000lbs
Mast Racking Capacity : 12,000 ft

Substructure :
Style : Telescoping
Height : 20.00 ft
Clear Height : 17.00 ft
Casing Capacity : 400,000lbs
Maximum Setback Load : 375,00lbs

Drawworks :
Make : Victory Rig Equipment
Model : VRT200H
Capacity : 200 Ton
Torque - Continuous : 16,000 ft lb

Swivel :
None

Rotary Table :
Make : TSM
Table Opening : 17 ⅟₂"
Maximum Load Rating : 150 Ton

Power Generation :

SCR / VFD / DC / DC : VFD Rig

Mud System :

Mud Pumps :

2 ea Weathford

Oil tools MP- 10
Power Rating : 1000hp @ 140 rpm
Pressure Rating : 5,000 psi
Active Mud Volume : 905 bbls
Shale Shakers : 2 es MI Swaco
Mud Cleaner : N / A

5 x 16 Cones
Centrifuge : N / A

Well Control :

TSM 850 Trailer Mounted Drilling Rig - For Sale

ID 2620

Worldoils Marketplace

Worldrigs ID: WR2608

NOV 1500 HP SCR Drilling Rig for Sale

NOV SCR Drilling Rig for Sale

Description :

General Description :
Make : NOV
Year Built : 2009
Est. Drilling Depth : 18,000ft
Est. Rig Move Loads : 60
Est. Camp Move Loads : 23
Rated HP : 1500

Mast :
Height : 142ft
SHL Load Capacity : 750,000 lbs
Mast Racking Capacity : 19,300ft

Substructure :
Style : Parallelogram
Height : 25.00ft
Clear Height : 23.30ft
Casing Capacity : 750,000 lbs

Drawworks :
Make : NOV
Power Rating : 1500 HP
Input Power : 2 Yongji YZ08X3
Brake Type : Disc
Drilling Line Size : 1 - 3 / 8"
Auxillary Brake : Wichita WC66

Top Drive : NOV TDS 11-SA
Capacity : 500 Ton
Torque - Continuous : 37,500 Ft-Lb @ 125 RPM

Rotary Table :
Make : NOV ZP-375 37-1/2"
Max Load Rating : 650 Ton

Power Generation :
Engines : 4 Detroit R1638AS36
Generators : 4 Baylor S437RUJ-597A
DC : SCR

Mud System :
Mud Pumps : 3 NOV 12-P-160 1600 HP @ 120 SPM
Res Mud Volume : 285 Bbis
Pressure Rating : 5,000 psi
Active Mud : 1100 Bbis
Shale Shakers : 3 MI Swaco Mongoose

Mud Cleaner : 1 MI Swaco Mongoose
Desander : MI Swaco
Desilter : MI Swaco

Well Control :
Annular : 13 -5 / 8" 5K Shaffer
Double Ram : 13 -5 / 8" 5K Shaffer

Choke Manifold : Weatherford Intnl 4-1 / 16" 5,000 psi

Bop Closing Unit :

Sara Services MC-220-11BT3

NOV 1500 HP SCR Drilling Rig for Sale

ID 2608

IRI 1100Hp Trailer Mounted Telescopic Drilling Rig for Sale

Worldoils Marketplace

Worldrigs ID: WR2609

IRI 1100Hp Trailer Mounted Telescopic Drilling Rig for Sale
Trailer Mounted Telescopic Mast Triple Drilling Rig - 2001 Built

Description :

IRI 1100Hp Trailer Mounted Telescopic Drilling Rig for Sale

ID 2609

TT Sense Trailer Mounted Drilling Rig for Sale

Worldoils Marketplace

Worldrigs ID: WR2610

TT Sense Trailer Mounted Drilling Rig for Sale
850 HP Trailer Mounted Six Drilling Rigs for Sale

Description :

TT Sense Trailer Mounted Drilling Rig for Sale

ID 2610

Worldoils Marketplace

Worldrigs ID: WR2592

OIME SL-7 Drilling Rig For Sale

1200 HP Mechanical Drilling Rig for Sale

Description :

Drawworks :

OIME SL - 7 1,200 HP, 1-1/4" Lebus Grooved Drum Drawworks w / Parmac
342 Hydromantic Brake, and Foster Hydraulic Make-Up and Break-Out
Catheads and Hydraulic Power Supply

Mast & Substructure :
PARCO SL-7 136ft High Mast S/N: SL413675, 21ft Parco Split Level
Substructure, S/N: 1136A with 17ft Rotary Clearance, 750,000 lb. Static
Hook Load Capacity w/(10) lines, Drillers Side Top Doghouse, Catwalk
w / (10) 18"H Pipe Racks and (2) Triangular Pipe Racks

Transmission Drive Train :
(3) Caterpillar 3412T, 700 BHP Engines w / Allison CLT 6061-4 Six Speed
Trasmission Compound

Rotating Equipment :
IDECO Model 275 -K, 27-1/2" × 53 -1/4" Rotary Table with Split Master
Bushing
National Model P-400 400 Ton Swivel
5-1/4" Hex × 42ft L Kelly

Traveling Equipment :
PARCO 375 Ton Crown, w / (6) 1-1/4" × 42" Dia. Sheaves
American Block Model DH4E350, 350 Ton Capacity, (5) 1-1/4" × 42" Dia.
Sheaves

Triplex Mud Pumps :
(1) National Model 10-P-130, 1,300 HP Triplex Pump, independent drive
with remanufactured Caterpillar D-3512DITA, 1,250 HP engine at 1200
RPM, with 6 × 5, 60 HP centrifugal charge pump and two master skid
arrangements.
(1) National Model 9-P-100, 1,000 HP Triplex Pump powered by
Caterpillar 3508TA 1,000 BHP Engine with 6 × 5, 60 HP centrifugal charge
pump and master skid.

Utility House :
Electrical Control System w / (2) Caterpillar 3412T Engines w / GE 420 KW
Generators for Light Plant Operation and (2) Sullivan-Palatek 30 HP Air
Compressors with Receiver Tanks

Fuel Tank :
9,000 Gallon Cylindrical Fuel Tank and Lubester w/ (2) 2 HP Fuel Transfer
Pumps

Water Tank :
500 bbl. Horizontal Open Top Water Tank w / (2) 2 × 1-1/2, 25 HP Centrifugal
Pumps

Mud System :
320 bbl. Mud Shaker Tank, (3) Compartment Flat Bottom Tank, Internal
Plumbing,11ft Porch w / (2) 8 × 6, 75 HP Centrifugal Pumps, (1) Brandt MA
7.5 HP Agitator
425 bbl. Mud Intermediate Tank, Flat Bottom Tank w / Internal Plumbing,
Mud Jets, (1) Brandt 7.5 HP Agitator and (1) Lighting7.5 HP Agitator
480 bbl. Suction Tank (3) Compartment Flat Bottom Tank w / Internal
Plumbing, Mud Jets, 11ft Porch with (2) 8 × 6, 75 HP Centrifugal Pumps, and
(3) Brandt Max 2000 7.5 HP Agitators
(1) Brandt King Cobra Single Linear Shale Shaker
Brandt Desander w / (2) 12" Cones
Brant Model SE-12 Cone Desilter w / (12) 4" Cones

Well Control Equipment :
Shaffer Model 14080-3s Closing Unit, 6-Station, 140 Gallon Capacity, w / 6-
Station Remote Panel
Hydril Type GK 13-5/8", 5,000 PSI Annular Preventer
Cameron 13-5/8", 5,000 PSI Double Ram Preventer
Drilling Spool 13-5/8", 5,000 PSI w/(1) 4 -1/16" Flanged Side Outlet and (1)
2-1/16" Flanged Side Outlet
Cameron 5,000 PSI Choke Manifold on 8ft 6"W × 17ft 0"L Skid

Auxiliary Equipment :
a) Change House
b) Parts House
c) Elevator Links, 3" × 132"
d) Automatic Driller
e National Model D Dead Line Anchor
f) Martin Decker Type D, Weight Indicator, 500,000 lbs. capacity
g) Tongs, Varco BJ, Type HT-55
h) Upper Kelly Valve
i) Lower Kelly Valve
j) Kelly Spinner
k) Pipe Spinner
l) (2) Ingersoll-Rand, Model K6U, 10,000# Air Hoists
m) Rotary Tongs, Elevators, and Handling Tools
n) (8) Steel Framed Rig Mats
o) Suitcase Electrical Distribution
p) Wire Line Unit
q) Rig Manager Quarters
r) 12 Person Crew Quarters
s) Reserve Pit Pumps, (2) 8 × 6, 75 HP Centrifugal Pumps

Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

--------------------------------------------------------------------
Search words(for official use only) -
OIME SL-7 Mechanical Drilling Rig for Sale
1200 HP OIME SL-7 Drilling Rig for sale
OIME SL-7 Land Drilling Rig for Sale
Drilling Rig - OIME SL-7 for Sale in USA
Mechanical Land Drilling Rig for Sale in USA
--------------------------------------------------------------------

OIME SL-7 Drilling Rig For Sale

ID 2592

Worldoils Marketplace

Corsair 550Hp Drilling Rig For Sale

ID 2593

Worldoils Marketplace

Worldrigs ID: WR668

Bomco VFD AC New Rig For Sale
New Bomco VFD AC 2000HP rig for sale
BOMCO 2,000HP AC Drilling Rig

Classification :
Bomco, 2,000HP AC, drilling depth capacity to +/-23,000’

Drawworks :
Bomco Single Drum with AC motors (2) c/w Auto Driller

Mast :
Bomco 149’x 32’ base 1,000,000lbs. static hook load

Substructure :
Bomco Swing-Up ; Rotary table cap 1,000,000 lbs. Set back 495,000 lbs.
- Two (2) Doghouse
- One (1) Drillers Cabin

Power System :
Four (4) Cat 3512B Engines 1,476 BHP ea.; SR4B 1750KVA Generators,
one (1) Aux. Generator

VFD House :
Power Circuit Breaker – 2000AF/1800AT, 600Volt, 3 pole, 65 kA IC, UL/CSA
- Three(3) voltage-source inverters for three (3) mud pump AC motors (one 1200kW motor each mud pump)
- Two (2) voltage-source inverter for 800kw AC motor to drive Drawworks
- One (1) 800kw voltage-source inverter for 800kw AC motor to drive rotary table.
- One (1) Votage-source inventer for 42.5kw Auto-driller motor

Mud Pumps :
Three (3) 1,600HP triplex pumps, 8" x 6" x 100HP Charge Pumps

Mud System :
2,000Bbls Active
Three (3) DERRICK FLC 2000-3 panel Linear Motion Shakers,
One (1) each Derrick FLC 2000 Desander/Desilter
One (1) Vacuum D-Gasser
One (1) High Speed Centrifuges
Two (2) 8" x 6" x 100HP Mixing pumps & Hoppers
Thirteen (13) Agitators,

Drill Line :
6 x 19S + IWRC, EIPS, 1-1/2”, 1200m wire rope.(API 9A)

Rotary Table :
Bomco 37 ½” driven by DC Motor

Traveling Block & Hook : Bomco

Swivel : Bomco

BOP Handling System : One (1) set

Air Compressor :
Two (2) 5.5 m³/min Srew type

Auxiliary Equipment :
One (1) 500 Bbl. water tank w/ 2 x pumps
One (1) 750Bbl fuel tank w/ 2 x pumps
Three (3) air hoist 11,,000lbs
Two (2) Hydraulic Cathead
One (1) set each 350 ton and 500 ton Elevator Links
One (1) Drill Line Spooler, Hydraulic Drive

One (1) set CCTV Monitoring System
One (1) set MD Totco Drilling Instrumentation System
One (1) set HPU & Controls
One (1) Casing Stabbing board
One (1) set Catwalks & Pipe Racks
One (1) Drill Floor Tool Elevator.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------------
Search words (for official use only) -
Bomco VFD AC New Rig
2000HP Land Rig Builders
Land Rig Sellers
2000HP Land AC Rig For Sale
Land Rig Brokers
New Bomco 2000HP AC Rig for sale
AC Rig Builders
Land Rig VFD AC Rig
---------------------------------------------------

Bomco VFD AC New Rig - 2000HP

ID 668

Worldoils Marketplace

1997 Built Trailer Mounted Super Single Slant Rig for Sale

ID 2578

Worldoils Marketplace

Cantilever Mast on Dolly Hydraulic Lift Triple Drilling Rig

ID 2579

Carrier Mounted Telescopic Mast, Double Drilling Rig

Worldoils Marketplace

550HP Carrier Mounted Drilling Rig for Sale

ID 2575

Worldoils Marketplace

650HP Carrier Mounted Drilling Rig for Sale

ID 2576

Carrier Mounted Telescopic Mast Drilling Rig

Worldoils Marketplace

350HP Telescoping Style Rig For Sale

ID 2577

Chicago Pneumatic T670W Drilling Rig for Sale

Worldoils Marketplace

Chicago Pneumatic T670W Drilling Rig - For Sale

ID 1385

Worldoils Marketplace

Mobile B-59 Drilling Rig for Sale

ID 1416

Worldoils Marketplace

Mobile B61 HDX Drilling Rig for Sale

ID 1419

Worldoils Marketplace

Mobile B56 Drilling Rig For Sale

ID 2572

Texoma 600-30 Foundation Drilling Rig for Sale

Worldoils Marketplace

Texoma 600-30 Foundation Drilling Rig for Sale

ID 2571

Deep Rock CTM 10,000 Drilling Rig for sale

Worldoils Marketplace

Worldrigs ID: WR221

DeepRock CTM 10,000 Drilling Rig for Sale
Used Drilling Rig 1986 Built for Sale

Model : CTM 10,000
Manufacturer : DeepRock
Year : 1986
Condition : Used

Description :

Deep Rock CTM 10,000 Drill Rig Package

Package Includes :
Deep Rock CTM 10,000 Commercial Water Well Drilling Rig (Trailer Mounted with Single Axle)

Hydraulic Driven
Mission 2 x 1-1/2 Mud Pump
Hydraulic Breakout Wrench
Electric Jib Wrench
Mud Pit
Trailer Mounted
Accessories Include :
2-3/8 x 2-3/8 FMxFM subs
2-3/8 x 3-1/2 FMxFM subs
Drag Bits, 3-1/2 to 6 inch
Tri-Cone Bits, 3-1/2 to 6-1/8 inch
4 inch DTH hammer with 4-1/4 inch Bit
4 inch Shock Absorber sub for D.T.H.
Approximately 200 ft. Drill Rod

Ingersoll-Rand Gyro-Flo Air Compressor

600 CFM / 100 PSI
Powered by Detroit 671 Diesel Engine
Mounted on a 1974 GMC 6500 Truck
366 Gas Engine (rebuilt with less than 10,000 miles)
Allison 4 speed Transmission
Air Brakes

Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

------------------------------------------------------------------------------------
Search Words(for official use only) :
DeepRock CTM 10,000 Drilling Rig for Sale
Land drilling Rig for Sale
DeepRock CTM 10,000 Drilling Rig for sale in USA
Used drilling Rig 1986 Built
Used Drilling Rig DeepRock CTM 10,000
------------------------------------------------------------------------------------

Drilling Rig - Deep Rock CTM 10,000 - 1986 Built for Sale

ID 221

Reichdrill C-700 Crawler Drilling Rig for Sale

Worldoils Marketplace

Reichdrill C-700 Crawler Drilling Rig - For Sale

ID 2570

Worldoils Marketplace

Sling Shot Hydraulic Lift Triple Drilling Rig for Sale

ID 2562

Worldoils Marketplace

Cantilever Mast on Dolly Hydraulic Lift Triple Rig for Sale

ID 2563

Worldoils Marketplace

2013 Built Swing Lift Triple Drilling Rig for Sale

ID 2564

Worldoils Marketplace

Parallelogram Style Land Drilling Rig for Sale

ID 2565

Worldoils Marketplace

2013 Built Carrier Mounted Telescopic Mast for Sale

ID 2566

Worldoils Marketplace

1000Hp Parallelogram Style - Telescopic Mast Double Rig

ID 2567

Worldoils Marketplace

1000Hp Parallelogram Style - Telescopic Mast, Double Rig

ID 2568

Worldoils Marketplace

2013 Built Carrier Mounted Telescopic Mast for Sale

ID 2569

Workover Rig For Sale - BW Rig Alco Double (4200m) - Used

Worldoils Marketplace

Worldrigs ID: WR632

BW Rig Alco Double Used Workover Rig for Sale
Used American Workover Rigs for sale
Workover Rig For Sale - BW Rig Alco Double (4200m)

BW Rig Alco Double
Five axle, self-propelled, double drum, back in rig
4200 m x 73 mm tubing
12.7 liter 60 series Detroit Diesel rated at 425 hp engine
Allison CLBT-5860 Five speed transmission
25.4 cm x 106.7 cm main drum brakes
c/w 60.9 cm model 124 Eaton brakes
20.3 cm x 106.7 cm sand line brakes
31.7 m Cheyenne Model 104 mast w/106,800 DaN and 8 lines
4200 m x 73 mm tubing and 3000 m sucker rods
Sowa 100 ton model 9944 travel blocks
Fluorescent lighting
1” drilling line
4200 m x 12.7 mm swedge sand line
Hydraulic weight indicator
Dual winches

Combination
11.0 m X 3.4 m skid change house
6.6 m X 3.36 m tool-house accumulator portion
John Deere 55 KW generator

Handling Equipment
58-93R Foster tubing tongs
Cavins TC 101 air slips
2 - BJ and 1 – AOT elevators
60.3 mm, 73 mm & 88.9 mm standard tubing sizes
5/8” and 1” rod sizes
2 – 8 x 42 and 2 – 6 x 16 rig mats
Skid cat walk & 4 tumble racks

Safety Equipment
4 - 18 KG fire extinguishers
4 – Scott SCBA self-contained breathing apparatuses
Industrial Scientific LTX312gas detector
Safety and directional signs
Electrical Ground Bonding Equipment
Stretcher
Crown Saver
60.3 mm, 73 mm & 88.9 mm pipe ram
2 self-retracting life lines

BOP Equipment
Class III
Dreco RS, double-gate with a pressure rating of 35 Mpa and Townsend, annular with a pressure rating of 35 Mpa
88 gallons (333 liters) Oilco accumulator w/ 3 control and remote at drillers console
73 mm safety valves with a pressure rating of 35 Mpa
76.2 mm rod BOP
76.2 mm x 6 m swab lubricator c/w tool trap
73 mm gate valve

Pump
Skid pump
10.16 cm x12.7 mm National JWS-300L with a pressure rating of 35 Mpa
Detroit Diesel 8V92, 300 hp engine
5 speed manual transmission
3 x 2 x 13Mission Magnum I charger pump
7 valve manifold with a pressure rating of 35 Mpa

Mud Tank
38 M3 mud tanks c/w mud guns, mixing hopper and settling trough
20 - 5.08 cm X 6 m line pipe and suction hose
Poor boy degasser

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words(for official use only) -
BW Rig Alco Double Used Workover Rig for Sale
Used American Workover Rigs
Workover Rigs in USA
Workover Land Rigs in USA
Land Workover Rigs For Sale
Workover Rig For Sale - BW Rig Alco Double (4200m) - Used
Used Workover Rigs for sale
BW Alco Double Rig - Used For Sale
-------------------------------------------------------------------------------------------------------

BW Rig Alco Double Used Workover Rig - 4200m For Sale

ID 632

Featured equipments for sale

Used Ingersoll-Rand Drilling Rig 2001 built

Worldoils Marketplace

Worldrigs ID: WR165

Ingersoll-Rand DM-M2 Drill Rig for Sale
Used Drilling Rig 2001 Built for Sale

Model : DM-M2 Drill Rig (Blast Hole)
Manufacturer : Ingersoll-Rand
Year : 2001
Condition : Used

Description :

2001 Ingersoll-Rand Drill DM-M2 Drill Rig (Blast Hole)
Meter Reads 35,316 hours
Note : CAT Engine and all components overhauled/rebuilt around 3,500 hours of use since
CAT 3412 Diesel Engine
IR 1250 cfm / 350 psi Air Compressor
Spur Gear Power Head
Carousel
4 Hydraulic Leveling Jacks
Inside Cab with A/C & Heater & Control Station
Location : USA

Price & terms : Please enquire using the email form below.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------------------
Search words(for official use only) :
Ingersoll-Rand DM-M2 Drilling Rig 2001 Built for Sale
Used Ingersoll-Rand Drilling Rig 2001 built
Land Drilling Rig for Sale
2001 Built Ingersoll-Rand DM-M2 Drill Rig for Sale
Used Drilling Rig - Ingersoll-Rand DM-M2
2001 Built Drilling Rig for Sale
-------------------------------------------------------------------------------------------------------

Drilling Rig - Ingersoll-Rand DM-M2 - 2001 Built for Sale

ID 165

Atlas Copco T4W Drilling Rig 2005 Built for Sale

Worldoils Marketplace

Worldrigs ID: WR311

Used Drilling Rig Atlas Copco T4W - 2005 Built
Atlas Copco T4W Drilling Rig For Sale

Model : T4W
Manufacturer : Atlas Copco
Year : 2005
Condition : Used

Description
2005 Atlas Copco T4W drill rig
3,785 Hours as of August 2011
IR HR2.5 1250 cfm / 350 psi air compressor
Cummins QSK19C Diesel Deck Engine at 755 HP
50,000 lbs of Pullback
25 GPM CAT 2520 Bean Water Injection Pump

Hammer Lubricator
3 Carousels - (2) 4 Rod & (1) 7 Rod
Worm Gear Head
2 Speed Fan
375' ft of used Drill Pipe (25' x 4 1/2" x 3 1/2") and basic hand tooling included
6" & 8" used Hammers & Bits included
Lincoln Welder on board
Paint in Very Good Condition

Mounted on a CCC (Crane Carrier Company) truck
CAT C13 Diesel engine @ 380 HP
16,880 Low Miles on gauge as of August 2011
Tires (Very Good Condition)

Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------------
Search words(for official use only) :
Used Atlas Copco T4W Drilling Rig 2005 Built
Used Land Drilling Rig For Sale
Drilling Rig 2005 built for sale
Drilling Rig for sale in USA
Atlas Copco T4W Drilling Rig For Sale
-------------------------------------------------------------------------------------------------

Drilling Rig - Atlas Copco T4W - 2005 Built for Sale

ID 311

New 475 HP Five Axle Carrier Mounted Workover Rig

Worldoils Marketplace

Worldrigs ID: WR652

Five Axle Carrier Mounted Workover Rig
475 HP New US made Land Workover Rig For Sale

Specifications

5 Axle Carrier 96' 250,000# Derrick
C-15 CAT engine
4500 OFS Allison Transmission
Drawworks with disct assit, 450hp right angle gear box

42x10-38x8 double drum
Hydraulic leveling jacks
Hydraulic raised and scoped
Derrick boards fully automatic

Front end - 20,000#EACH/40,000#
Rear end - 23,000#EACH/46,000#
25,000# TAG~LE
Front tire size 38565R22.5
Rear tire size 11R22.5

10% down payment required before converting to a final invoice before painting.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

--------------------------------------------------------------------------------------------------------
Search words(for official use only) -
Five Axle Carrier Mounted Workover Rig
New Workover Rig For Sale
Workover Land Rigs for sale
New Land Rigs from America - Workover Rig
450hp Workover Rig For Sale
500hp land workover Rig for sale
Land Rig for Sale - New 475hp Rig
US made Land Rigs For Sale
475hp Workover Rig For Sale
All American made workover rig - new
-------------------------------------------------------------------------------------------------------

Five Axle Carrier Mounted - New Workover Rig 475 HP - For Sale

ID 652

Worldoils Marketplace

Worldrigs ID: WR676

Mechanical Trailer Mounted Drilling Rig for Sale
Land Drilling Rig for Sale - 1000 HP Mechanical Trailer
1000 HP Trailer drilling rig for sale
1000HP - Mechanical Trailer Package

The 1000 H.P. Trailer Rig Package is designed to meet the demands of our customers for today’s competitive market. We pride ourselves on doing the little things necessary that it takes to supply our customers with the latest innovative technology. When designing rig packages we try to meet three simple goals. All rig components must :
1. Operate Properly.
2. Rig up quickly.
3. Transport in the fewest loads possible.

Using these principles, we have designed this rig package to meet and exceed all of our customers needs.

I. Hoisting Equipment
i. Mobile drilling trailer mounted type 1000HP, with single drum drawworks, two Detroit series 60 14.0 liter engines with two Allison S6610H transmissions with hydraulic torque converter. Mast height 118 ft., load capacity-425,000 lbs. (210 ton API). Rig mounted on a 4-axle chassis.

A. Group I. Basic Rig
a. Drawworks – OEM-1000
i. Disc Brake System – Two (2) 60” O.D. x 4” Thick water cooled disc: Four (4) brake calipers w/park feature, each caliper can develop 48,000 ft-lbs @ 100 psi. Maximum 900 rpm calipers have a park feature rated @ 28,000 ft-lbs each. Manufacturer = Kobelt
ii. Air Clutch – Two (2) 30” diameter friction disc, slip torque rating 54,500 ft-lbs @ 100 psi, maximum 760 rpm, 1664 sq in lining area. Manufacturer = Witchita.
iii. Drum 24” O.D. x 40” length with Lebus groove system
iv. Centralized Lubrication System
v. Drill line Diameter-1 1/8”
vi. Drive Chain - Four-strand, 1 ½” pitch
vii.Total Disc Brake Area - 1680 sq. inches

b. Auxilary Brake
i. Air Operated : Water Cooled Disc with copper alloy wear plates, mounted to frame, coupled directly to drum shaft. Two (2) 36” Disc rated @75,000 ft-lbs @100 psi maximum 640 rpm.
ii. Size-236 or equal
iii. Maximum Pressure - 100 psi
iv. RPM-640
v. Direct Coupled Drum shaft.

c. Combined Gear Box
i. Combined right angle drawworks drive drop box with one output shaft for rotary drive and one output shaft (unused) for additional components.
     1. One input shaft with 1810 drive flange.
     2. Top right shaft - drawworks drive, air engaged 1.0 to 1 ratio keyed shaft
     3. Top lower shaft - rotary drive, air engaged 1.1489 to 1 reduction ratio keyed shaft.
     4. Bottom lower shaft – Future or additional components, opposite top lower shaft, air engaged, 0.9787 to 1 ratio (1.0217 to 1 ratio increasing), 1810 drive flange.
ii. Gear type lubrication pump mounted intermediate shaft provides positive lubrication to bearings.

d. OEM 118’-0” x 425,000# Telescoping Mast
The 118ft., mast provides is a telescoping design, manufactured in accordance with API and Drilling Structures Int’l Inc.’s strict quality control processes. The mast includes an automatically deployed racking board.
i. A telescoping derrick with open face derrick design, manufactured to API 4-F specifications. The open face design utilizes structural steel construction, which allows for maximum block clearance. Derrick includes a ladder from rig floor to crown and a block cradle with chain & hook for securing block during transport.
iii. Base Section :
a. A-leg style base section hinged to carrier frame. (2) Turnbuckles attached from bottom of derrick base to carrier frame allow for mast angle adjustment. The well-side derrick legs have manual screw jacks.

ii Specifications
Mast Height : 118’
No. of lines to Block : 8 or 10
API Operating Hook Load -
8-Lines : 340,000 lbs
10-Lines : 425,000 lbs

Drilling Line Size : 1-1/8 in.
Racking Board Height : 55ft., 58ft., 70ft.
Racking Board Capacity
5 in. Drill Pipe : 12,400 ft.

iii. Base Section :
a. A-leg style base section hinged to carrier frame. (2) Turnbuckles attached from bottom
of derrick base to carrier frame allow for mast angle adjustment. The well-side derrick
legs have manual screw jacks.

iv. Lower Section :
a. 6 in x 6 in x 3/4 in angle main legs, with 6 in x 4 in x 3/8 in rectangular tubing “back” braces. Lower section of mast hinges to top of derrick base and rests on headache rack during transport.

v. Upper Section :
a. Angle construction. 6 in x 6 in x ¾” upper legs, with 3 in x 3 in x 3/8 in “back” braces. Upper section rests inside lower section until mast is raised. Upper section then telescopes hydraulically upward from lower section and locks in place with automatic latching pins.

vi. Crown Block :
a. Crown block is set up for a 8 or 10 line string-up. Crown sheaves are grooved for 1-1/8 in. Wire line. All sheaves are mounted on tapered roller bearings with grease certs for ease of maintenance.
b. Crown includes : (1) one 30 in fast line sheave, and (4) four 24 in crossover sheaves.

vii. Racking Board :
a. The mast includes an all welded racking board. The racking board automatically deploys as the mast is extended.

viii. Derrick Raising System :
a. The derrick is designed to utilize two, 72”x 9” x 3-stage, double acting raising rams and one 50’ x 7” single-stage telescoping cylinder.

ix. Guylines :
a. Derrick includes (2) load guys from the crown to carrier and (1) set of wind guys that meet or exceed API specifications.

e. Hydraulic Catworks :
a. Hydraulic break out cylinder for breaking out pipe connections, 4 ft. stroke, maximum pull load 20,000 lbs. Installed on the mast. Includes cable, roller guides and hydraulic piping.
b. Hydraulic make up cylinder for making up pipe connections, 4 ft. stroke, maximum pull load 20,000 lbs. Installed on the mast. Includes cable, roller guides and hydraulic piping.
c. Controls are located at the operator’s console.

f. Traveling Block Limit Switch (Crown Block Saver)
a. Safety device for limiting traveling block raising. Installed at the main drum to activate the main brake when traveling block is up to a pre-determined height.

g. Deadline Anchor
a. Dead line anchor to be used with compression type weight sensor. Drum type, mounted on carrier frame in front of drawworks frame.

h. Diesel Engine
a. Two Detroit series 60 - 14.0L engines rated at 600 BHP each@ 2100 RPM’s, 6 cylinders (inline) complete with DDC electronic control system.
b. Includes : Radiator, Heavy Duty Blower, 24V starter and alternator, variable speed governor, full instrumentation (ignition switch, ddr connector, electic throttle, electronic display module), two (2) 12v batteries and spark arrestor muffler.
c. Specifications : 600 BHP @ 2100 RPM, 1650 lbs/ft @ 1100 RPM

i. Transmission
a. 5 speed (6th gear locked out), automatic, Allison S6610H or equal w/torque converter, oil cooler. Dual air/hydraulic operation. Max. capacity 850 HP, 2500 RPM, 2300 ft-lbs input.

j. Compound Gear Box
a. Compound gear box, dual input, single output, may be drive with one or both engines.
b. Two input shafts, air engaged, 1810 drive flange (engagement of either input or a combination of both)
c. Single output, 1810 drive flange, ration 1.0271 to 1 to combination gear box.
d. Gear type lubrication pump. Mounted to output shaft provides positive lubrication to bearing.

k. Power Take-off
a. Chelsea 852 XB or equal, Used for hydraulic pump drive, mounted on transmission, 95 HP @ 1000 rpm output.

l. Hydraulic System
a. Two hydraulic gear pumps, one 500 gallon hydraulic tanks with containment pan, filters, heat exchanger and sight glass. Capable of producing 50 gpm @ 3000 psi, pressure return and circulation filters with visual indicator, 3000 watts portable generator, inline flow meter, system safety release valve, circuit breaker panel for heater/valve bank, operator panel with selector switch.
b. Custom built valve bank, 15 station manifold, prewired control panel and hand held remote with the following functions :
i. Mast lower/raise
ii. Mast telescope up/down
iii. Two (2) hydraulic pilot operated directional valve and joystick for winches.
iv. Six (6) leveling jacks.
v. D.S. sub raise/lower
vi. ODS sub raise/lower
vii. Make up/Brake out tong cylinders with remote torque adjustment
viii.Flow dividers for mast raise and sub cylinders
ix. Electrical control panel, remote controls and function switches for above
x. Velocity fuses on all cylinders for fall protection

m. Air System :
a. Air system with on (1) 60 gallon receiver to provide air to main air line and brake system. Includes air lines, control valves, pressure gauges.

n. Air Compressor :
a. Air compressors with direct drive, mounted on engine.
b. Reciprocal type, 28 CFM capacity

o. Operator’s Controls :
a.   Operator’s console to include the following controls and instrumentation:
i.    Main drum brake lever
ii.   Main drum clutch controls
iii. Two engine throttles – One (1) hand and one (1) foot
iv. Shift levers for two 4-speed transmissions
v.   Two emergency engine shut downs
vi. Hydraulic pump controls
vii. Two mud pump engine regulators
viii. Mud pump engine emergency shut down
ix. Mud pump clutch controls
x.   Instrumentation Air Pressure Gauge
b. All air operated controls are located in the central part of the console and have identifying tags. Console is located to provide good visibility of traveling block, work floor and racking board.

p. Engine Emergency Shut Down :
a. One engine emergency shut down valve for emergency engine stop. Located at the operator’s console.

q. Trailer Mounted :
a. A heavy duty 4-axle trailer with air suspension and 109,000 lb. total capacity.
b. All lights and brakes are equipped for attachment to the truck
c. Spring brake chambers for safety.

r. Tires (12.00 x 22.5, Pirelli Radial) 16 each
a. All tires, disc wheels, 16 tires mounted as dual. Tire rating 109,000 lbs. total, all tires inflated to 100 psi.

s. Suspensions
a. One (1) two axle, single point bogey at rear.
b. Two single axles with air bags, air can be dumped for backing into position
c. All axles are 12.5 metric ton capacity.

t. Four Pedestals for Hydraulic Jacks
a. Pedestals under front jack for rig stability. Four pedestals require. There are to be six jacks for leveling the rig.

u. Six Hydraulic Jacks
a. Six hydraulic leveling jacks to take off the load from the axle and provide horizontal position of the rig during operation. Each jack is operated by its own controls and is equipped with screw with thrust nut, which allows relieving hydraulic pressure from he jacks during rig operation. Controls are located at the mast supports.

v. Fuel Tank
a. Mounted on the side of the chassis

w. Auxiliary Hydraulic Winch (2 winches using one for spare) :
a. Braden or equal hydraulic winch with 12,000 lbs. pull load at the first layer, 336 fpm @ 65 GPM and 2400 psi.
b. Hydraulic brake and spooler
c. Sheave is mounted on the crown

x. Rotary Table Drive
a. One rotary table drive with driveshaft and two air clutches(one for rotary on and off, second for emergency shut down)
b. Controls are located at the operator’s console

y. Rotary Table Drive Chain Gear Box :
a. Includes three oil-greased shafts inside full-length guard, complete with sprockets, flanges, chains and chain gear-box with one shaft to connect to rotary table. One lower section mounted on the trailer, one upper section mounted on the sub and one flanged driveline between.

Group II
A. OEM Hydraulically Telescoping 17-425 Substructure
1) Material and labor to fabricate one (1) OEM hydraulic telescoping 17-425 substructure as per the following :
i. Hydraulic Telescoping Substructure with :
- 425,000# Rotary beams
- 300,000# Setback.
- Clear height under rotary beams = 14’
- Transportation height 12’-6”
- Base dimensions 45’L x 12’-6”W
- Working floor dimensions 20’ x 26’
- Rathole and mouse hole locations
- Two tong backup posts
- Removable braces in cellar area.
- Provisions for attaching mast support beam.
- Supply and installation of four (4) hydraulic scoping cylinders.
- Pull out post for guy wires to front of mast.
- Removable flooring around rotary table area.
- B.O.P. Dolly and tracking.
The above substructure to be fabricated under A.P.I. 4F guidelines. Upon completion, substructure to be tagged with OEM A.P.I. 4F nameplate.

B. Mud Boat :
i. Material and labor to fabricate one (1) mud boat. Mud boat complete with :
1. Supports under jacks on carrier.
2. Pipe guides for tires
3. Pin connections to mast support beam.
4. Loading hitches on one end

C. Mast Support Beam/Brake Water Tank/Trip Tank Combo
i. Material and labor to fabricate one (1) mast support beam/trip tank/brake water tank combination. Combination complete with :
1. Brake Water Tank - Material and labor to fabricate one (1) break water tank. Tank to be enclosed for rig up winterization.
a. Tank to have the following :
i. Tank bottoms to be 3/8” plate.
ii. Tanks constructed with ¼” v-crimp.
iii. Tank rims to be 4” square tubing.
iv. Access ladder
v. Man way
vi. Tong buckets, guides, and safety cage.
vii. Supply and installation of :
1. Two (2) 2 x 3 centrifugal pumps
2. Heat exchanger

2. Trip Tank – Material and labor to fabricate one (1) trip tank. Tank to be enclosed for rig up winterization.
a. Tank to have the following:
i. Tank bottoms to be 3/8” plate.
ii. Tanks constructed with ¼” v-crimp.
iii. Tank rims to be 4” square tubing.
iv. Access ladder
v. Man way
vi. Tong buckets, guides, and safety cage.
vii. Provisions to mount:
1. One (1) 2 x 3 centrifugal pumps

3. Mast Support Beam – Material and labor to fabricate one (1) three runner mast support beam.
a. Support beam complete with:
i. Supports for carrier jacks and bottom base of mast.
ii. Loading hitches on both ends for tailboarding.

D. Rig Floor Stairways – All stairs to meet OSHA standards with no slip grip strut stair treads.
i. Three (3) 17’-0” stairway from substructure floor to ground level. Stairs to be built on a 45-degree angle.
ii. One (1) 9’-6” stairway from top of the substructure to top of mud tank. Stairs to be built on a 45 degree angle.

E. V-Door Ramp - Ramp to be fabricated to work with a 17-0” floor height substructure and an 18” catwalk. Ramp to be fabricated with ½” plate and 3” pipe guides.

F. Catwalk – One 50’ x 5’-0” x 18” catwalk with snatch post mounted on one end.

G. Doghouse - House to be fabricated on a three-runner oilfield type skid with loading hitches on both ends for tailboarding. House to have checker plated flooring, v-crimped wall construction, and an arched type roof. House complete with the following :
1. 4’-0” porch on one ends
2. 2’-0” walkway on the back side of the doghouse running to full length.
3. Handrails around house perimeter.
4. One sliding doorway to rig side.
5. One swing type doorways on both ends with windows built in.
6. Two (2) windows on the back side wall
7. Knowledge box
8. Three compartment workbench.

Group III - Prime Mover Drive
A. Lighting System –Heavy Duty explosion proof Fluorescent and Mercury Vapor Lightning System designed to use with Mast and Substructure, Mud System, complete with Plug, Receptacles, Cable, Cable Clamps and all necessary Leads and fitting. Lighting System consist of: Mast and Racking Platform, Substructure Lighting, Mud Tanks and Mud Pumps, and Utility House, including Battery emergency light at Driller’s console certified for Class 1 Division 2.

B. Engine/Generator/Part/Change Package
a. Utility House - “New” - Material and labor to fabricate one (1) utility house. House (43’x 12’ x 9’) to be constructed on an oilfield type skid (45’x 12’x 18”) with loading hitches on both ends for tailboarding. Top of skid covered with ¼” checker plate.
i. Parts/change house to be complete with :
1. Twenty (20) lockers.
2. Changing bench near lockers.
3. Two sets of shelves on each wall running 8’-0”.
4. One (1) bench on each wall. Bench compartments to be 5’-0” with folding bench. Two compartments to have ventilation to the outside for paint storage.

ii. Generator house complete with :
1. One (1) 8’-0” sliding door on side of the generator location
2. Provisions for mounting one (1) electrical plug panel.
3. Radiator end of skid left open.
4. Skid designed for generator tie downs to be mounted on cross beams of skid for safety.

b. Generator – Two (2) Detroit 60 Series 14L.

c. Electrical Specifications
i. Item 1 – Clarification
1. Prime mover specifications were not provided; IEC Systems assumes the engine and generator sizes as listed in this proposal.
2. The generator house will be designed to accommodate the “Three Tank Drilling Rig Standard” and thus be interchangeable with all rigs that meet the standard
3. IEC System proposal is based on performing the installation in Houston, Texas. All components listed below will be installed and tested
4. Customer will furnish the voltage regulator and voltage rheostat

ii. Item 2 – Generator Houston Electrical System For a Mechanical Rig
1. Generator House 480 VAC Switchboard
   a. 1 ea - A/C Generator Control Panel by IEC Systems for the control of two (2), 450 kW, 480 volt, 3 phase, 4-wire, 60 Hertz, A/C generators.
   b. Switchgear to contain full instrumentation and will not be designed for full parallel operation of generators.
   c. Switchboard will be NEMA Type 1 enclosure with ASA #61 gray enamel finish, designed to meet NEMA and OSHA specifications.
   d. All nameplates will be constructed of plastic plates, black on white for names and red on white for warnings.

GENERATOR CONTROLS MOUNTED IN THE SWITCHGEAR WILL CONSIST OF:
2 - Generator Main Circuit Breakers (Gen PWR)
2 - Generator "Power Available" Indicating Lights
2 - Voltmeters
2 - Voltmeter Switches
2 - Ammeters
2 - Ammeter Switches
2 - Frequency Meters
2 - Reverse Power Relays
1 - Ground Detection System
2 - Governor Control Switches
2 - Wire to Customer Furnished Voltage Regulators
2 - Wire to Customer Furnished Voltage Rheostats
1 - Lot Current Transformers, Potential Transformers, Fuse Blocks, Fuses, Buss Bar, Switchboard Wiring, and related equipment

Switchboard will be fully assembled, wired, and shop tested.

2. Generator House 480V Motor Control Center (MCC)
a. 1 ea - 480 Volt, 3-phase, 60 Hertz A/C Motor Control Center, equipped with braced horizontal and vertical bus
b. Enclosure will be NEMA Type 1 with front only access
c. Motor starters will be combination, full voltage- non-reversing with 3-pole overload blocks, heaters, control power transformer, operating handle, fuses and start/stop controls in cover with red "RUN" indicating lights
d. 480V MCC Motor Starters

i. Five (5) Size 4 Starters for :
   1 ea 60 HP Mud Mixer 1
   1 ea 60 HP Mud Mixer 2
   1 ea 60 HP Desander
   1 ea 60 HP Desilter
   1 ea Spare

ii. One (1) Size 3 Starter for:
    1 ea 40 HP Trip Tank

iii. Five (5) Size 2 Starters for:
   1 ea 20 HP Drill Water 1
   1 ea 20 HP Drill Water 2
   1 ea 25 HP Brake Cooling Pump 1
   1 ea 25 HP Brake Cooling Pump 2
   1 ea Spare

iv. 480 V MCC Motor Feeder Circuit Breaker
1. 1 ea - 150 AMP 3 Pole Circuit Breaker for Camp Feeder

3. Generator House 480V Distribution Panel Boards
a. 1 ea - 480V POWER DISTRIBUTION PANEL BOARD (P1)
i. 480V, 3-Phase, 3-Wire
ii. NEMA 1 Enclosure
iii. 600A MLO with Feed-Thru Lugs
iv. 36 CKT with branch Circuit Breakers for the following loads:
     a. 1 ea - 100A/3-Phase CB for 75 KVA Lighting Transformer
     b. 1 ea - 60A/3-Phase CB for BOP Accumulator (30 HP)
     c. 1 ea - 60A/3-Phase CB for Spare
     d. 1 ea - 30A/3-Phase CB for Agitators 1, 2 Feeder (10 HP each)
     e. 1 ea - 30A/3-Phase CB for BOP House Heater (15 kW)
     f. 1 ea - 30A/3-Phase CB for Change House Heater (15 kW)
     g. 1 ea - 15A/3-Phase CB for Liner Washer 1 (3 HP)
     h. 1 ea - 15A/3-Phase CB for Liner Washer 2 (3 HP)
     i. 1 ea - 20A/3-Phase CB for Fuel Pumps 1 & 2 Feeder (3 HP each)
     j. 1 ea - 20A/3-Phase CB for Shale Shaker 1 & 2 Feeder (5 HP each)
     k. 1 ea - 30A/3-Phase CB for Spare
     l. 1 ea - 30A/3-Phase CB for Wireline (15 HP)

b. 1 ea - 480V DISTRIBUTION PANEL BOARD (P2)
i. 480V, 3-Phase, 3-Wire
ii. NEMA 1 Enclosure
iii. 600A MLO with Feed-Thru Lugs
iv. 30 CKT with branch Circuit Breakers for the following loads:
     1. 1 ea   100A/3-Phase CB for Hydraulic Power Unit (HPU), (50 HP)
     2. 1 ea   100A/3-Phase CB for Air Compressors #1 & 2 (25 HP each)
     3. 1 ea   20A/3-Phase CB for Vacuum Degasser (7.5 HP)
     4. 1 ea   30A/3-Phase CB for Dog House Heater (15 kW)
     5. 1 ea   60A/3-Phase CB for Agitators 3, 4, 5 Feeder (10 HP each)
     6. 1 ea   30A/3-Phase CB for Hopper House Heater (15 kW)
     7. 1 ea   40A/3-Phase CB for Spare
     8. 1 ea   60A/3-Phase CB for Spare
     9. 1 ea   30A/3-Phase CB for Spare
     10.1 ea 30A/3-Phase CB for Spare

4. Generator House 120/208 Distribution Panel Board
a. 1 ea - 120/208V DISTRIBUTION PANEL BOARD (P3)
i. 120/208V, 3-Phase, 4-Wire
ii. NEMA 1 Enclosure
iii. 225 MLO, Top Feed
iv. 42 CKT with branch (124/240V-10 KAIC) Circuit Breakers for the following loads:
     1. 1 ea -   100A/3-Phase CB for Rig Floor Lighting Panel
     2. 1 ea -   100A/3-Phase CB for Spare
     3. 1 ea -   100A/3-Phase CB for Boiler House Feeder
     4. 1 ea -   60A/3-Phase CB for Spare
     5. 1 ea -   30A/3-Phase CB for Spare
     6. 10 ea - 20A/1-Phase CBs for Lighting Circuits 1 thru 10
     7. 1 ea    20A/1-Phase CBs for Engine/Generator House Steam Heater Blowers
     8. 1 ea    20A/1-Phase CBs for Trip & Shaker Tank Steam Heater Blowers
     9. 1 ea    20A/1-Phase CBs for Mud Pump 1 & 2 Steam Heater Blowers
     10. 1 ea 20A/1-Phase CBs for Mixer Skid Steam Heater Blowers
     11. 1 ea 20A/1-Phase CBs for Engine/Generator House Lighting Circuit
     12. 1 ea 20A/1-Phase CBs for Generator 1 & 2 Block Heater Feeders

5. Generator House Plug Board
a. 1 ea Metal shroud protected weatherproof receptacle panel with matching plugs for all the above starters and circuits having cables that exit the Generator House.
b. Receptacles to have protective vapor proof caps. Plugs and receptacles will be permanently identified.
c. 480V Plug and Receptacle sets provided for the plug board include all loads listed above in Section C and D (MCC and Panel Board Loads)
d. Additional Plug Board Spare Plugs and Receptacles
    6 ea   30A, 3-Pole, 480V
    5 ea   60A, 3-Pole, 480V
    2 ea   100A, 3-Pole, 480V

6. Generator House 480/208-120V Rig Lighting Transformer
a. 1 ea 75 KVA Transformer with 480V Primary and 120/208V Secondary mounted in a drip-proof enclosure. Primary Power will be from the P1 Panel Board.

7. Generator House Power and Control Cabling
a. 1 lot A/C Power and Control Wiring by IEC Systems to connect two 450 KW, 480 volt, 60 Hertz A/C generators to 480V Switchboard
b. All A/C generator power cables with 90°C rates insulation sized/de-rated for use in 45°C ambient atmosphere.
c. 1 lot Glastic Plates to prevent excessive heat caused by electrical fields where power cables enter generators.
d. 1 lot A/C Power and Control Wiring to connect A/C generator control panel to:
i. MCC
     1. P1 Panel Board
     2. P2 Panel Board
     3. P3 Panel Board
     4. 75 KVA Lighting Transformer
     5. Generator House Plug Board (receptacles)

8. Generator House Lighting
a. Generator Sheds Lighting receptacle string complete with plugs and receptacles, cable, cable clamps, and all necessary leads and fittings to accommodate the following :
i. 4 ea - C1D2 Hazardous Area fluorescent fixtures complete with lead
ii. 1 ea - C1D2 Hazardous Area Metal Halide floodlight fixture complete with lead
iii. 1 ea - Mounting Stanchions for Floodlights

Group IV - Rotating Equipment
B. “New” American Block Traveling Block and Hook
a. 250 Ton Traveling Block, API load rating: 250 Ton, sheave groove 1 1/8”.

C. “Rebuilt” National C275 Rotary Table and Accessories
a. 27 ½” rotary table with 27 ½” table opening, static load capacity : 650 ton, gear ratio 3.6 : 1, torque cap : 30,000 ft-lbs @ 60 rpm.

D. “Rebuilt’ Rotary Swivel
a. 250 Ton

Group V - Circulating Systems
A. Two “New” Mechanical Drive 1000HP Mud Pumps
a. Two (2) “New” Eweco - 1100HP Mud Pumps
b. Two (2) “New” Detroit D2000 Engines
c. Unitized on one common skid with:
i. Model C-300-100F(H) OWI Torque Converter
ii. Belt Drive
iii. Dual 24” Eaton Airflex
iv. Drum Hub for 24” Dual Clutch
v. Drum Flange, external 24”
vi. 5 x 6 Centrifugal pump
d. Control system including :
i. Air throttle
ii. Air valve to engage and disengage clutch
iii. Hoses and mounting hardware.

B. Two Tank 850 BBL Mud System - Material and labor to fabricate one (1) two tank 850 bbl mud system as per our discussions. OEM to completely fabricate tanks (40’ x 10’-6” x 7’-0”) on a three runner oil field type skid (50’ x 7’-10” x 8”) with loading hitches on both ends for tail boarding. Tanks to have internal ladders to each compartment, equipment supports, fold down type handrails and covered with galvanizes bar grating .Mud system to consists of the following :

i. Shaker Tank – Four equal compartments
- Shale Pit
• 10’-0’’ compartment
• One (1) cleanout
• One (1) overflow
- Desander Pit
• 10’-0 compartment
• One (1) cleanout
• One (1) overflow
• One (1) 6” suction line from 5 x 6 centrifugal pump.
• One (1) 8” equalizer. Bottom mounted with top mounted handle.
- Desilter Pit
• 10’-0’’ compartment
• One (1) cleanout
• One (1) overflow
• One (1) 6” suction line from 5 x 6 centrifugal pump.
• One (1) 18” equalizer. Bottom mounted with top mounted handle.
• Equipment supports for one (1) 10 HP agitator
- Degasser Pit
• 10’-0’’ compartment
• One (1) cleanout
• One (1) overflow
• One (1) 8” bottom equalizer and one (1) 8” top equalizer.
• Equipment supports for one (1) 10 HP agitator.
- 9’-0’’ Porch
• Able to accept two (2) 5 x 6 centrifugal pumps
• 10’’ equalizer line to Suction Tank.
• Covered with ¼’’ Chk’d floor plate.
• Overhead plated roof.

ii. Suction Tank – Two Compartments
- Suction compartment
• 30’ – 0’’ compartment
• One (1) cleanout gate.
• Two (2) 6” suction lines going to main mud pumps.
• Equipment supports for two (2) 15 HP agitators.
- Pill Compartment
• 10’-0’’ compartment.
• One (1) cleanout gate.
• One (1) 8” equalizer. Bottom mounted with top mounted handle.
• One (1) overflow
• Equipment supports for one (1) 10 HP agitator
- Porch
• Able to accept two (2) 5x6 centrifugal pumps.
• 6’’ line to both pumps
• One (1) discharge dumping line
- Pill Tank
- Suction Tank

iii. Accessories
1. Single slide for shaker. Slide to mount to the side of the tank and fold down during transportation. Slide complete with 6” pipe end for hose hook up in the field.
2. Single slide for desander. Slide to mount to the side of the tank and fold down during transportation. Slide complete with 6” pipe end for hose hook up in the field.
3. Single slide for desilter. Slide to mount to the side of the tank and fold down during transportation. Slide complete with 6” pipe end for hose hook up in the field.
4. Fold down type walkways around shaker area complete with galvanized grating and removable handrails. Walkways to fold down during transport.

iv. Solid Control Equipment
1. Four (4) Mission Magnum 6 x 5 x 11 magnum1 with a 10.5 inch impeller, mechanical seal and hard iron material, all mounted on a mission fabricated steel base with woods style coupling, OSHA type coupling guard and a 75 HP 1750 RPM, 3 PH, 230/460 Volt, 60 Hz explosion proof electric motor.
2. Three (3) Derrick DE-AG-10 Agitators complete with 10 HP, 1800 RPM explosion proof C-face motor bolted to a gear box. Including shaft stabilizer, shaft and impeller.
3. Two (2) Derrick DE-AG-15 Agitators complete with 15 HP, 1800 RPM explosion proof C-face motor bolted to a gear box. Including shaft stabilizer, shaft and impeller.
4. One (1) Derrick two cone desander.
5. One (1) Derrick sixteen cone desilter.
6. One (1) Hopper with venturi.
7. One (1) Derrick Vacuum degasser 1200 GPM. Skid mounted with heavy duty 3 HP explosion proof 230/460 volt, 60 Hz, 3 Ph, 1800 RPM motor and manual starter with heavy duty vacuum pump.
8. Two (2) Derrick Flo-Line Cleaner 503 Shale Shakers w/weir feed complete with three panel screen frame, support structure, and explosion proof electrics with the following options :
1. A.W.D. (+7 deg uphill to –1 deg downhill)
2. Standard Screen Underflow hopper
3. Weir feed
4. Super G Vibrations Motors
5. Single side tensioning system
9. 36” Poor Boy Degasser on a separate skid.

VI. BOP
A. Six (6) Station Accumilator
B. Choke & Kill Manifold
C. Note – BOP to be supplied by others (Not include in pricing.)

VII Utilities
A. Air Compressor & Receiver
a. Two (2) Gardner Denver, ST-30, Electra-Saver II, rotary screw air compressor, Model EBE99Q. 30 HP, 460 volts, 3 phase, 60 HZ, TEFC, with NEMA 4 Control Enclosure.
b. Two (2) Steel Fab, 400 gallon, vertical air receivers with full skirt, 200 psi working pressure.Part # A12614. Unit is California Coded.
c. One (1) RNC250 air dryer for 250 CFM.

VIII. Instrumentation
A. Drift Indicator
Totco Double Recording Drift 0 to 8° and 0 to 14°. Clock complete with following :
- 1 ea. Godevil Kit
- 1 ea. Chart tool & Chart Reader
- 1 ea. Tool Maintenance Box w/ Tool
- 100 ea. Chart 0 to 8° and 0 to 14°
- 10 ea. Rubber Finger Stabilizer
- Fishing Tool 7 rope sockets

B. Indicator/Gauge & Counter
EMS-2 or Equivalent Rotary Torque indicator, Weight indicator, and Tong torque gauge, Circulating pressure gauge, two (2) ea. Pump stroke counter.

C. Drilling Recorder
EMS-2 or Equivalent Drilling recorder, 9 pen (weight, torque, penetration rate, pump pressure, rotary rpm). (Diameter 103 Dan Kurang 6 Buah Printed Circuit Board).

D. PVT
EMS-2 or Equivalent Pit volume totalizer, single channel with audio alarm and warning lights, four pit transmitters totalizing relay, gain and loss gauge with gauge zero devices. Full digital instrumentations.

E. Flow-Shoe-Device
EMS-2 or Equivalent Device complete with recorder and alarm system

Group IX - Fabrications
A. Accumulator/Junk Bend/Air Package Combo
a. Material and labor to fabricate one (1) accumulator/pipe bend skid as per our conversations. OEM to fabricate a three runner oilfield type skid (40’ x 10’ x 12”)
     covered with ¼” check plate. Piping to be done during rig up. Skids complete with:
i. One (1) arched type roof and enclosure.
v. Mounting supports for two (2) vertical air receivers.
vi. Mounting supports for one (1) accumulator.
vii. Mounting supports for:
     1. Two (2) air compressors
viii. Access doors
     1. One 36” swing type door way
     2. Two (2) 48” double door way.

B. Parts/Mechanic Shop - “New”
    Material and labor to fabricate one (1) parts/change house. House (38’x 10’x 9’) to be constructed on an oilfield type skid (40’x 10’x 12”) with loading hitches on both ends for tailboarding. Top of skid covered with ¼” checker plate. House to be complete with:
     • One (1) work bench and One (1) Table
     • Two sets of shelves on each wall.
     • Four (4) storage benches.

C. 500 bbl Water Tank
Material and labor to fabricate one (1) 500 bbl water tank as per our conversation. Tanks fabricated on oilfield type skids with loading hitches on both ends for tailboarding. Skid ends to be covered with ¼” check plate. Tanks complete with the following :
- Two (2) 3 x 2 x 11 Centrifugal pumps with 25 HP Motors
- Suction and Discharge Piping.
- Two (2) ladder rung to top of tank (In and Out)
- 4” Fill cap
- 2” Outlet
- 1” Drain

D. One (1) 12,000 Gallon Fuel Tank
Material and labor to fabricate one (1) 12,000 gallon fuel tank as per our conversation. Tanks fabricated on oilfield type skids with loading hitches on both ends for tailboarding. Skid ends to be covered with ¼” check plate. Tanks complete with the following :
- Two (2) fuel transfer pumps
- One (1) filter system.
- Suction and Discharge Piping.
- Two (2) ladder rung to top of tank (In and Out)
Top and Side man ways, 4” Fill cap, 2” Outlet, and 1 ½” Drain

E. Cable Trays - Material and labor to fabricate one (1) lot of cable trays as per the following. Cable trays to be fabricated as follows :
- Two (1) 40’-0” sections from substructure to fuel tank.
- One (1) 35’-0” section from mud tanks to main trays.
- One (1) 20’-0” section from substructure to main stairs.
- Cable trays complete with the following:
     • Hinged doors in 5’-0” sections with chain for each doorway.
     • Flat expanded metal running the length of each tray.
     • ½” round bar at each end of cable tray to provide protection when pulling wires.

F. Mud Gas Seperator and Transportation Skid - “New”
- Material and labor to fabricate one (1) 36” poor boy degasser and skid. Gas buster to me mounted on a three-runner oilfield type skid with loading hitches on both ends for tailboarding. Gas buster complete with :
     • 36” Pipe with weld caps on both ends.
     • Internal baffles.
     • All piping and pipe brackets.
     • Gas buster to elevate to working condition to allow operation under half full conditions.
     • Gas buster to be mounted in lay down position for transport and to be raised by truck for operation.

Group X - Rig Up Items
A. High Pressure Piping
a. Material and labor to fabrication one (1) lot of high-pressure piping. All piping to be 4” schedule 160 and all unions to be weld type 1002. High pressure piping complete as per the following:
   i. Standpipe
    1. Standpipe to be located on the Off-Driller’s Side.
    2. Standpipe to have hammer union breaks at mast sections so it can me transported without being taken off the mast.
ii. Standpipe Manifold
    1. The standpipe manifold will be complete with manifold type tee with two 2” outlets. Outlets to have hammer union connections only.
    2. The 4” outlets to have a 4” gate valve on the top of the cross.
iii. High Pressure Line
    1. The high-pressure line will run from the bottom of the standpipe manifold to the side of the mud boat
    2. The cellar line will be mounted to the mast support beam.
    3. There will be hammer unions at break of the substructures for transportation.

B. Structural set and assemble
a. Mast and Substructure
i. Mast accessories.
ii. Install flooring, handrails, v-door, stairs, etc.

C. Set and align
a. Rotary Table
b. Drawworks
c. Doghouse
d. Utility house control panel and foot drawworks console.
e. Mud Pumps
f. Brake water/trip tank
h.Water Tank/Fuel Tank
i. Catwalks and pipe racks
j. Cable Trays
k. Koomey/Junk basket

D. Piping, Fittings, hoses, valves, etc.
a. Water Supply
   i. To Mud system and mixing system
   ii. Rig Floor
   iii. Brake water system
   iv. Feed and return lines from brake water tank to drawworks drum and brake.
   v. Fuel System
        1. To feed and return lines from duel tank to generator set.
vi. Air System
        1. Air Supply for accumulator unit and rig floor
        2. Hose connections from rig floor air manifold to drawworks control console, air hoist and other floor tools
a. To generator set engine starters
vii. Miscellaneous
       1. Vibrator hoses.
viii. Electrical Rig Up
ix. Testing
     1. Fill mud tanks with water
     2. Provide lube products to all machinery.
     3. Provide Fuel for testing
     4. Circulate water through mud system
     5. Run air compressors.
     6. Pressure test all high pressure lines and connections to working pressure
     7. Run all solids control equipment.
     8. Load test generators
     9. Test all SCR assignments.
x. Rig Down
     1. Rig down and assist in load out on customer furnished trucks.

Delivery : Seventy-five to ninety (75-90) days from receipt of purchase order and down payment.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------------------------------------------
Search words (for official use only
MechanicalTrailer Mounted Drilling Rig for Sale
1000HP Land Rig Dealers
1000 HP Mechanical Trailer Drilling Rig for Sale
1000HP land Rig For Sale
1000HP Drilling Rig for Sale - Mechanical Trailer
Drilling Land Rig for Sale - 1000 HP
1000 HP Land Drilling Rig For Sale
Used 1000hp Mechanical Trailer for Sale in USA
1000hp Land Rig Builders
----------------------------------------------------------------------------------------------------

Mechanical Trailer Package - 1000HP

ID 676

Worldoils Marketplace

Worldrigs ID: WR663

VFD Land Rig for Sale
3000 HP Land Drilling Rig
3000hp SCR Drilling Rig

General Overview
Depth rating : 29,520 ft., (5”DP)
Horsepower : 3,000 HP
Max. Hook load : 1,500,000 lbs

Drawworks
Type : Single or Double Drum
HP rating : 2,000 HP
Drilling line : 1-3/4” EIPS
Main brake : Disc
Drive Type : A/C or D/C

Mast
Type : Cantilever
Height : 152 ft (Optional heights)
Static Hookload Cap : 1,500,000 lbs
Width at Drill Floor : 30 ft

Substructure
Type : Slingshot or Swing-Lift
Clear Height : 35 ft
Casing load : 1,961,560 lbs
Setback load : 800,000 lbs

Top Drive
Type : Varco TDS-8SA (Optional)
Rating : 750 ton Max.
Torque : 63,047ft/lbs

Rotary Table
Kelly Bushing : Pin Drive
Table opening : 37-1/2”

Power Generation
Generator type : Cat SR-4B (x 4)
Generator rating : 2,150 KVA (each)
Engine type : Cat 3516B (x 4)
HP rating : 1,860 BHP (each)

Mud Pumps
Type : F Series
HP rating : 1,600 HP
Pressure Rating : 5,000 psi

Power Control
Type : SCR or VFD (Optional)

Mud System
Active system capacity : 3,000 bbls
Reserve system capacity : Optional
Shale shakers : Brandt, Derrick

Instrumentation
Manufacturer MD Totco
Type Rig Sense

Desert Package
Rolling Gear & Trailers Optional

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

--------------------------------------------------------------------------------------------------------------------
Search words (for official use only) -
VFD Land Rig for Sale
US made 3000hp Land Rig For sale
New Chinese made Land Rig For Sale
SCR Rig Builders
3000hp Land Rig Brokers, Dealers
3000hp Land Rig For Sale
Land Drilling Rig For Sale
New Build Land Drilling Rig - 3000hp
3000HP SCR Rig
---------------------------------------------------------------------------------------------

VFD Land Rig - 3000hp - for Sale

ID 663

Worldoils Marketplace

Worldrigs ID: WR293

Brewster N-45 Drawworks for Sale
Used Brewster N-45 Drawworks for Sale

For further information, please contact rigs@worldoils.com .

-----------------------------------------------------------------
Search words(for official use only) :
Used Brewster Drawworks for sale
Brewster Drawworks for sale
Used Brewster N45 Drawworks for sale
Drawworks for sale
-----------------------------------------------------------------

Drawworks - Brewster N-45 For Sale

ID 293

Worldoils Marketplace

Schramm T450WS Drilling Rig - For Sale

ID 2721

Ingersoll-Rand CM-780D Blasthole Drilling Rig for Sale

Worldoils Marketplace

Ingersoll-Rand CM-780D Blasthole Drilling Rig - For Sale

ID 2722

Soilmec R-620 Crawler Drilling Rig for Sale

Worldoils Marketplace

Worldrigs ID: WR832

Soilmec R-620 Crawler Drilling Rig for Sale
Drilling Rig - Soilmec R-620 Crawler - For sale

Model : R-620 Drill Rig - Crawler
Manufacturer : Soilmec
Year : 2006
Condition : Used

Description :

2006 Soilmec R-620 Crawler Drill Rig
Hours: 6,200
R-620
Hydraulic Drilling Rig
A new model : The R-620 drilling rig on caterpillar 3.30C high power
module has been designed to perform the follwing jobs :
Bored pile, with dry or bentonite system;
Bored pile, with casing installed by oscillator or rotary crowd system;
C.F.A (Continuous flight Auger) piles.

The main features of R-620 are the following:

Machine class: 60 tons
New machine caterpillar type 3.30C module c/w diesel engine and
sound proofed canopy,mounted on 360 degrees slew ring
New electronic engine C9 ATAAC wth more power(355Bhp) and
meeting the most recent emission regulations.
New powerful rotary : 201 kNm
Completely self erecting;mast able to withstand the max torque
over the whole length.
Casing installation by rotary crowd system
Advanced instrumentation
Reliability and safety
Stability and easy to handle
High productivity
Easy to transport
Cable crowd system(optional)
Mechanical and hydraulic pre - arrangement for casing

oscillator(available on request)

Large diameter bored pile
Max pile diameter	mm	1800
Max cased diameter	mm	1500
Max pile depth	m	66
Max nominal torque	kNm	201
Max drilling speed	rpm	34
Spin off	rpm	144
Main winch nominal line pull	kN	192
Service winch nominal pull	kN	80
Engine¹	type	Caterpillar C9 ATAAC-HEUI
Max power	Kw (bhp)	261(355)
Crowd system by cylinder	kN	210/150
Pull down stroke	mm	5600
Cable crowd system(13m stroke)	kN	200/200
Operating weight	ton	63

Continuous Flight Auger (CFA)
Max pile diameter	mm	900/1000
Max pile depth	m	22.5
Max nominal extraction force	kN	600
Max nominal torque	kNm	201
Max drilling speed	rpm	34
Operating weight	ton	60-63

Location : USA

Soilmec R-620 Crawler Drilling Rig - For Sale

ID 832

Worldoils Marketplace

Four Axle Carrier Mounted Land Workover Rig - 375hp - for sale

ID 653

Worldoils Marketplace

Failing CF-15 Drill Rig for sale

ID 888

Worldoils Marketplace

Simco 2800 HS (HT) Drilling Rig - For Sale

ID 148

Worldoils Marketplace

Driltech T25K3W Drilling Rig for Sale

ID 771

2007 Built Atlas Copco RD20 Range III Drill Rig

Worldoils Marketplace

Atlas Copco RD20 Range III Drilling Rig - For Sale

ID 1047

IDECO H30 Double - 3000m - Used Workover Rig

Worldoils Marketplace

Worldrigs ID: WR634

Ideco H30 Double Workover Rig For Sale
Workover Rigs For Sale
3000m Used Workover Rig For Sale

Ideco H-30 model with a 40 X 8 – 3808 drum size
Self propelled double drum, back in & 4 axel carrier
Rated capacity of 3000m – 73mm tubing
Detroit 8V92N, 365 hp - 225 kW engine
Allison CLT5860 6 speed transmission

20.3 X 101.6 main drum brakes
20.3 X 96.5 sand line brakes
Pemco 96-170, 29m rated,
78 dNa & stung 6 lines mast
3000m of 73mm tubing racking capacity

Sowa 0824-3-A 100 ton travel blocks
Vapor proof florescent & sodium lights
25.4 mm X 300m drilling line
14mm X 3000 m sand line
Hydraulic martin decker clipper weight indicator
Dual winches

Combination :
3 compartment skidded steel building
3.5m w x 11.6m l
John Deer 75 kW generator

Handling equipment :
Foster 58-93R tubing tongs
Cavins advance model C air slips
BJ-90-TA -100 ton X 73mm & BJ-90-TA-65 ton X 60.2 mm elevators
73 mm & 60.3mm are the standard tubing sizes
19mm – 25mm rod sizes
2 – 2.4m x 13.7m & 1 – 2.4m x 5m rig mats
1.25m w x 12.5m l c/w 2 sets hinged pipe catwalk racks

Safety equipment :
4 - 14kg dry chemical fire extinguishers
4 self-contained scott air pack breathing apparatuses c/w 2 spare bottles
LEL monitor & 6 personal gas detector monitors
Safety and directional signs
Electrical ground bonding equipment
Basket stretcher c/w spine board, rescue slings & blankets
Crown saver
2 self-retracting life lines

BOP equipment :
Class III
Shaffer 152mm X 35mpa, LWS double gate & shaffer spherical
Wagner 3 accumulator station - 250 L 21mpa c/w operators controls &
N2 backup mounted in skidded combination building
2 -73mm - 35mpa safety valves
89mm rod BOP
152mm kill spool X 21mpa c/w 50mm wing valve
76mm x 21 mpa swab lubricator c/w jars & tool trap
76mm X 20mpa swabbing valve

Pump :
Skidded heated building
National JWS-340 triplex 102mm plungers X 127mm stroke
John Deer Model 6125H 12.5 L 350 hp engine
Eaton 10 speed transmission
Mission Magnum 127mm X 152mm charge pump
6 – 50mm X 35mpa manifold

Mud tank :
38m3 two compartment mud tank c/w stairs, railings, mix hopper, mud guns,
settling trough, steam coil, lighting & wind flag
120m X 50mm - 35mpa line pipe
12m X 10mm suction hose
External gauge

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) -
Ideco H30 Double Workover Rig For Sale
Workover Land Rigs in USA
Used 3000m Ideco H30 Double Workover Rig for Sale
Land Workover Rigs For Sale
Workover Rig for sale
Used American Workover Rigs
Ideco H30 Double (3000m) for sale
-----------------------------------------------------------------------------------------------------------

Ideco H30 Double - 3000m - Used - Workover Rig - For Sale

ID 634

Kin Rig S 300 Double - 3000m Workover Rig

Worldoils Marketplace

Worldrigs ID: WR636

Workover Rigs For Sale
Kin Rig S 300 Double - 3000m - Used - Workover Rig - For Sale
3000m Used Workover Rigs For Sale

Kin Rig S300-3810
Self-propelled double drum back-in
Rated capacity at 3,000m w/73mm tubing
Engine - DDEC 60 series (287kW/375hp)
Transmission - Allison CLT 5861 - 6 speed
Main drum brakes - 25.4cm x 96.5cm
Eaton 124 single auxiliary brake with
1,400L fluid capacity
Sand line brakes - 25.4cm x 96.5cm
Mast - Kin Rig KR103-220 rated 98,000
daN w/six lines
Racking capacity - 3,000m x 73mm
double tubing
4,200m x 19mm triple rods
Travel blocks - McKissick 73A - 100 ton
c/w spring
Lights - fluorescent & quartz floods
Drilling line - 25.4mm x 420m wire rope
Sand line - 14mm x 3,700m wire rope
Weight indicator
Electronic sandline counter

Combination :
3.05m x 10.4m steel building
3.05m x 3.3m change house
3.05m x 6.3m tool house/accumulator
40 kW Isuzu diesel generator

Handling equipment :
Foster 58-93 tubing tongs c/w air back-up
Cavins model C power air slips
BJ elevators
Standard equipment - 60.3mm & 73mm EUE tubing
19mm - 25mm sucker rods
2 - 2.4m x 13.7m rig mats
Catwalk w/2 sets of pipe racks

Pump :
Oilwell - PST 346 - 102mm plungers x 152mm stroke 35,000kpa
Engine - Detroit Diesel 8V - 71 (237KW/318hp)
Transmission - fuller - 5 speed
Wichita 76mm x 101mm charge pump
Seven-valve reverse circulating manifold
Enclosed in a 3m x 6.7m steel building

Mud tank :
27m3 - 3.0m x 6.7m
Mud guns, mixing hopper & setting ditch
120m x 50mm line pipe & 12m x 101mm suction hose
Circulation degasser

Safety equipment :
4 - 14kg dry chemical fire extinguishers
2 - self-contained breathing apparatus w/spare cylinder
Gas detector
Safety & directional signs

Electrical ground bonding equipment
1 stretcher
Crown saver
Pipe ram saver
2 self retracting life lines
Electronic sandline counter

BOP equipment :
AEUB Class III BOP
152mm - 35,000kpa dreco spherical
152mm - 35,000kpa dreco w/valve
Allstar - 208L - 21,000kpa accumulator w/3 station controls &
nitrogen back-up system
Hoses, remote station
73mm EUE - 35,000kpa tubing safety valve
89mm rod BOP c/w handles
HD hydraulic oil saver
76mm x 9.1m swab lubricator w/jars & tool trap
76mm swabbing valve - 21,000kpa

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) -
Workover Rigs For Sale
Workover Land Rigs in USA
Used 3000m Kinrig S 300 Double Workover Rig for Sale
Kinrig S 300 Double - 3000m - Used Workover Rig for sale
Land Workover Rigs For Sale
Kinrig S 300 Double (3000m) for sale
-----------------------------------------------------------------------------------------------------------

Kin Rig S 300 Double - 3000m - Used - Workover Rig - For Sale

ID 636

Ideco H35 KD Double (4200) - Used Workover Rig for sale

Worldoils Marketplace

Worldrigs ID: WR633

Ideco H35 KD Double (4200) - Used Workover Rig for sale
Workover Rig for sale
Ideco H35 KD Double (4200) for sale

General
Ideco H-35 KD 4210-38
Self-propelled double drum back-in Rated capacity at 3,400m w/ 73mm tubing
Engine - Detroit Diesel 8V-92TA (357KW/480hp)
Transmission - Allison CLT 5860 - 6 speed
Main drum brakes - 25.4cm x 106.7cm

Hydromatic brakes - Parmac 122 w/1,500L fluid capacity
Sand line brakes - 20.3cm x 96.5cm
Mast - Ideco 102-212 rated 94,340daN w/six lines
Racking capacity - 3,400m - 73mm
Double tubing 4,000m - 19mm triple rods

Travel blocks - McKissick 73A - 100 ton c/w spring
Lights - vapour-proof fluorescent & quartz floods
Drilling Line - 25.4mm x 518m wire rope 19mm - 25mm sucker rods
Sand line - 12.7mm x 3,700m wire rope
Weight indicator

Combination
2.74m x 12m change house/tool house
40 KW - Isuzu diesel generator

Handling Equipment
Gill model 500 tubing tongs c/w air back-up
Cavins model C power air slips
King Oil Tool elevators
Standard equipment - 60.3mm & 73mm EUE tubing

19mm - 25mm sucker rods
2 - 2.4m x 12.1m rig mats
Catwalk w/2 sets of pipe racks

Safety Equipment
4 - 14kg dry chemical fire extinguishers
2 - self-contained breathing apparatus w/spare cylinder
Gas detector
Safety & directional signs
Electrical ground bonding equipment
1 stretcher

Crown saver
Pipe ram saver
2 self retracting life lines

BOP Equipment
AEUB Class III BOP
152mm - 35,000 kpa Shaffer Spherical
152mm - 35,000 kpa Shaffer LWS with valve
NL Shaffer - 180 L - 21,000 kpa accumulator w/3 station controls & nitrogen back-up system
Hoses, remote station

73mm EUE - 35,000 kpa tubing safety valve
89mm rod BOP c/w handles
HD hydraulic oil saver
76mm x 9.1m swab lubricator w/ jars & tool trap
76mm swabbing valve - 21,000 kpa

Pump
Ellis Williams - model 440 - 102mm plungers x 152mm stroke 35,000 kpa
Engine - Detroit Diesel 8V-71 (268KW/360hp)
Transmission - Spicer - 5 speed
Mission 76mm x 50mm charge pump
Seven-valve reverse circulating manifold
Enclosed in steel building

Mud Tank
32m3 c/w mud guns & hopper
90m of 50mm line pipe & 12m of 101mm suction hose
Circulation degasser

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) -
Ideco H35 KD Double (4200) - Used Workover Rig for sale
Workover Rig for sale
Used American Workover Rigs
Workover Land Rigs in USA
Used Ideco H35 KD Double (4200) Workover Rig for Sale
Land Workover Rigs For Sale
Ideco H35 KD Double (4200) for sale
-----------------------------------------------------------------------------------------------------------

Ideco H35 KD Double (4200) - Used Workover Rig for sale

ID 633

Worldoils Marketplace

Schramm T985 Drilling Rig for Sale

ID 854

Worldoils Marketplace

Worldrigs ID: WR696

Ingersoll-Rand RD20 Range III Drill Rig for Sale
Used Ingersoll Rand RD20 Range III Drill Rig - for Sale

Model : RD20 III Drill Rig
Manufacturer : Ingersoll-Rand
Year : 2002
Condition : Used

Description :

2002 Ingersoll-Rand RD20 Range III Drill Rig - S/N: 6609
IR HR2.5 - 1250 cfm / 350 psi Air Compressor
Cummins QSK19C Diesel Deck Engine
Cat 2520 water injection pump
Hammer Lubricator
Floating Sub
Cat Walks
Hydraulic Leveling Jacks
Mounted on a CCC (Crane Carrier Company) Truck with 4 Axles
Cummins M11 Diesel Engine
VIN#: 1CYDCM4811T045124

Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------------------
Search words(for official use only) :
Ingersoll-Rand RD20 Range III Drill Rig - 2002 Built - for Sale
Used Ingersoll-Rand RD20 Range III Drill Rig
Ingersoll Rand Land Drilling Rig for Sale
Ingersoll-Rand RD20 Range III Drill Rig for Sale in USA
2002 Built Ingersoll-Rand RD20 Range III Drill Rig
--------------------------------------------------------------------------------------------------------------------

Ingersoll-Rand RD20 Range III Drill Rig - 2002 built - for Sale

ID 696

Worldoils Marketplace

Worldrigs ID: WR2707

PortaDrill TLS Drilling Rig - For Sale
Drilling Rig - PortaDrill TLS for Sale

Model : TLS Drill Rig
Manufacturer : PortaDrill
Year : 1978
Condition : Used

Description :

PortaDrill TLS Drilling Rig - For Sale

ID 2707

450 t Hydraulic Land Drilling Rig for Sale

Worldoils Marketplace

450 t Hydraulic Land Drilling Rig for Sale

ID 2807

Worldoils Marketplace

Worldrigs ID: WR2706

Bucyrus Erie 10R Drilling Rig for Sale
Drilling Rig - Bucyrus Erie 10R - For Sale

Model : 10R Drill Rig
Manufacturer : Bucyrus Erie
Year : 1972
Condition : Used

Description :

Bucyrus Erie 10R Drilling Rig for Sale

ID 2706

Worldoils Marketplace

Worldrigs ID: WR2701

Drillmax 250 Well Drilling Rig for Sale
Drilling Rig - Drillmax 250 - For Sale

Model : 250 Drill Rig
Manufacturer : Drillmax
Year : 2015
Condition : Used

Description :

Drillmax 250 Well Drilling Rig - For Sale

ID 2701

Worldoils Marketplace

Worldrigs ID: WR160

National 1320 SCR Drilling Rig for Sale
2000 hp Land Drilling Rig for sale

Refurbished in 2007 Recertified 2009

Drawworks
(Rebuilt in 2009)2000 HP,
National 1320 UE drawworks
grooved for 1 3/8-drill line powered
by 2 – 752 Electric Motors.
Brake is 7838 electric power.
Brake rebuilt by N.O.V. in 2007

Mast and Substructure
Pyramid swing-up type substructure and 157’ mast with 1,000,000# hook load.
25’ floor height with serial numbers.
Mast and Sub Level 3 inspection and (Level 3 Re-certification in June of 2009’).

Rotary
National 37.5 rotary, independent drive with gearbox using GE 752 electric motor.

Mud Pumps
Two (2) Gardner Denver PZ-11 (Rebuilt in 2009) * powered by two (2) each GE 752
electric motors; K-20 pulsation dampers and charging pumps all skidded. Secondary
electric gear end oiler pumps, two electric chain case oilers

Generators
Four (4) (New in 2007)
Detroit 16V Series 2000 Electronic Engines rated at 1500HP.
Generators are marathon 950 KW Continuous Prime Power.
Three (3) generator sets to run operations with one (1) spare unit. A fifth
matching genset is also included.

Blowout Prevention and Well Control Equipment
(Re-certified in 2009 by Cameron Iron Works with certificates)
13 5/8 10,000 # equipment, Double Ram and Single Ram, 5,000# Annular, complete
with drilling spool. 4” HCR Valve and (1) manual valve on BOP’s
Two (2) kill side valves and (1) check valve. BOP handling system by J.D. Neuhaus,
50 metric ton capacity 4 button pendant with emergency stop, oiler/lubricator.

SCR House
Four (4) SCR panels and 4-generator panels GE type. (New in 2007).
2000 AMP Frame, SCR drive is GE Generation III SCR Bridges. MCC is GE Model 7700.
Two 5 ton air conditioners, 10 X 40 skid.

Mud Pits Solids Control
1400 BBL system, three (3) round bottom tanks. Three (3) Brandt Triple King Cobra II
Automated Control Linear Motion Shale Shakers with MA-10 degasser, and (1) 16 – cone
desilter with 11 agitators. All Brandt solids control equipment. Two (2) 5X6 centrifugals for
feeding desilter and degasser.
Two (2) 5X6 centrifugals for feeding hopper and (2) 5X6 centrifugals for transferring mud
between tanks.
Twin hoppers, skidded with roof for access to bulk hoppers.

Manifold
10,000 # rated valves with Manual Drilling Chokes with 36”X 20’ gas buster mounted on skid
with manifold and 100 bbl trip tank with two (2) centrifugal pumps for transferring mud.

Closing Unit
6 station closing unit with remote in top doghouse. Secondary closing unit; four (4) stations
with remote.
One electric pump and three air pumps for pressuring system.

Water Tank
400 BBL water tank with two (2) 3 X 4 centrifugal to feed rig.

Fuel/Oil
14,000-gallon fuel tank with transfer pumps. Lubester for oil storage.

Storage
10X40 parts house for storage. Second 10X40 house with crew lockers and work station
inside.

Doghouse
Top Doghouse with auto driller, remote BOP closing unit.

Air Compressors
Two (2) Sullivan Palatek 50HP Screw Type Air Compressors rated at 210 CFM each.
Model SPS-200-116 Dryer.

Wireline Survey
Model OWI 1600 Explorer Unit .092 line.

Auxiliary and Miscellaneous
Two (2) air hoists 5 ton each. Pipe racks and catwalk. Surveying Equipment. Assorted
handling tools for drill pipe, tongs, elevators, slips, bails, subs and auto driller.
500-Ton National Block Hook . Pipe Spinners 3 ½” to 7”. Access Oil Tools “Back Saver”
slip assist.

Also Available but Not Included in Price
Top Drive: Varco TDS – 11 Top Drive System (New February 2007).Rebuilt in 08’.
Drill String consisting of :
18,000’ 5” Drill Pipe S-135
21 – 6 3/4” Drill Collars
30 Jts. 5” HWDP
9 – 8” Drill Collars.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

--------------------------------------------------------------------------
Search words (for official use only) :
Drilling Rig - National 1320 SCR for Sale
Land Rig Sellers
Oil Drilling Rigs for Sale
2000hp oil drilling rigs
Oil Rig Sellers
2000hp Land oil Rigs for sale
2000hp Land Drilling Rig
Land drilling rigs for sale
-------------------------------------------------------------------------

Drilling Rig - National 1320 SCR - 2000 hp for sale

ID 160

Chicago Pneumatic T650 Drilling Rig for Sale

Worldoils Marketplace

Chicago Pneumatic T650 Drilling Rig - For Sale

ID 2544

Worldoils Marketplace

Diedrich D120 Drilling Rig - For Sale

ID 2684

Worldoils Marketplace

Worldrigs ID: WR2685

Sonic SDC500-29P Drilling Rig for Sale
Used Sonic SDC500-29P Drilling Rig for Sale

Model : SDC500-29P Drill Rig
Manufacturer : Sonic
Condition : Used

Description :

Sonic SDC500-29P Drilling Rig - For Sale

ID 2685

Worldoils Marketplace

Worldrigs ID: WR2686

Mayhew 1000 Drilling Rig for Sale
Drilling Rig - Mayhew 1000 - For Sale

Model : 1000 Drill Rig
Manufacturer : Mayhew
Condition : Used

Description :

Mayhew 1000 Drilling Rig - For Sale

ID 2686

Schramm T450BH Crawler Drilling Rig for Sale

Worldoils Marketplace

Worldrigs ID: WR1004

Schramm T450BH Crawler Drill Rig for Sale
Schramm Drilling Rig - 2004 Built - For Sale

Model : T450BH Crawler Drill Rig
Manufacturer : Schramm
Year : 2004
Condition : Used

Description :

2004 Schramm T450BH Crawler Drill Rig
CAT 3406C diesel engine (newly rebuilt - couple hundred hours on engine)
Sullair 900 cfm / 350 psi Air Compressor (3000 hours since rebuilt)
Hours: 8000 or a little less.
Dust Collector
5-Rod Carousel
Everything is in good working order.
100 ft of Schramm Drill Rods (25 ft. length x 4-1/2 in.) & QL60 6-1/4" bits

Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
2004 Built Schramm T450BH Crawler Drilling Rig for Sale
Used Schramm Drilling Rig for Sale
Land Drilling Rig for Sale
Used Schramm T450BH Crawler Drill Rig for Sale in USA

Schramm T450BH Crawler Drilling Rig for Sale in USA

--------------------------------------------------------------------------------------------------------

Schramm T450BH Driling Rig - 2004 Built - For Sale

ID 1004

Worldoils Marketplace

Sonic SDC500-29P Drilling Rig for Sale

ID 2679

Worldoils Marketplace

Worldrigs ID: WR285

SK 775D Carrier Mounted Drilling Rig for Sale
Carrier Mounted Drilling Rig for Sale

Description

Drawworks :
Service King-775D (775 HP)

Power :
(2) 500 HP Detroit 60 Series Diesel Motors

Mast & Substructure :
Derrick Mast Model #SK112-350., Rated Capacity of 350,000 Lbs
12’ KB Substructure, Rated Capacity of 300,000 Lbs

Rotating & Traveling Equipment :
Rotary Table- Sentry S1-RT 17 ½” e
Blocks/Hook- Sentry 190 Ton
Hydraulic Kelly Spinner
Varco Hydraulic Pipe Spinners

Generators :
320 KW Generator with 3406 CAT Motor
365 KW Generator with 3406 CAT Motor

Air Compressor :
100 Gal Tank w/2 Cycle Quincy Pump Driven
by a 20 HP. Electric Motor

Mud Pumps :
(2) F-1000 Triplex Pumps with D-398 CAT Motors

B.O.P. Equipment :
Annular Preventer- N.A.
BOP- Shaffer 11” x 5M Double Ram
5 Station, 100 Gal. Accumulator
Choke Manifold- Swaco 3-1/8’’ X 5M

Mud Systems :
400 Bbl Mud Tank System
(2) Swaco Mongoose Shale Shakers
Swaco 2 Cone Desander
200 Bbl Pre-Mix Pit

Tubulars :
6200’ G105 Drillpipe With 4-1/2’’ XH Connections
1100’ 4-1/2’’ HWDP with 4-1/2’’ XH Connections
(15) 6 ½” Drill Collars with 4 ½” X-Hole Connections

Pipe Handling Equipment :
Tongs- 1 Set BVM Denver Type C Tongs. 1 Set Varco BJ HT55 Tongs
Pipe Spinners- NOV SSW-30 Hydraulic Pipe Spinner
Slips- 4-1/2’’DP, 6’’DC,
Collar Clamp
Elevators- WTM 225T 4-1/2’’ DP
Lift Subs for Drill Collars

Assorted crossover, bit subs :
6’’ Hex Kelly
4’’ Square Kelly
3 Sets Pipe Racks
Wireline Machine
Pressure Washer
Mud Bucket

Spare Rotary Table

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Carrier Mounted Drilling Rig for Sale
775 hp Service King Drill Rig for Sale
Drill Rig - 775hp for Sale in USA
Service King Carrier Mounted Drilling Rig in USA
SK 775D Carrier Mounted Drilling Rig in USA
---------------------------------------------------------------------------------------------------------------

SK 775D Carrier Mounted Drilling Rig for Sale

ID 285

Worldoils Marketplace

Worldrigs ID: WR666

SCR Land Drilling Rig for Sale
LS National Oilwell 2,000HP SCR Drilling Rig
2000hp Land Rig Sellers
2000hp Land Rig

Classification :
LS-National Oilwell2,000HP SCR,
drilling depth capacity to +/-23,000’

Drawworks :
LS-National Oilwell with DC motors (2) ;
106,922lbs Fast line pull, c/w Auto Driller

Mast :
LS-National Oilwell 150’x 29.5’ base 1,000,000lbs.
static hook load, 1,300,000lbs GNC

Substructure :
LS-National Oilwell Slingshot ; Rotary table cap 1,000,000 lbs.
Set back 600,000 lbs. c/w Walking system
: One (1) Doghouse
: One (1) Toolhouse
: One (1) Drillers Cabin

Power System :
Four (4) Cat 3512B Engines 1,757 BHP ea.; SR4B 1900KVA
Oversized Generators, one (1) Aux. Generator

SCR House :
H2000, five (5) SCR Control cubicles each include
SIEMENS 6R70 series DC speed regulator + power unit + control connection

Mud Pumps :
Three (3) 1,600HP triplex pumps, 8" x 6" x 100HP Charge Pumps

Mud System : 2,100Bbls Active
Three (3) Brandt King Cobra Linear Motion Shakers,
One (1) each Desander/Desilter
One (1) Vacuum D-Gasser
Two (2) High Speed Centrifuges
Two (2) 8" x 6" x 100HP Mixing pumps & Hoppers
Fifteen (15) Agitators,
Fourteen (14) Mud guns

Drill Line :
1-1/2”, 6x19, Regular Lay, IWRC1 1/8’ EIPS

Rotary Table :
LS-National Oilwell 37 ½” driven by DC Motor

Traveling Block & Hook :
LS-National Oiwell

Swivel :
LS-National Oilwell

BOP Handling System :
One (1) set

Air Compressor :
Two (2) Quincy Srew type

Auxiliary Equipment :
One (1) 600 Bbl. water tank w/ 2 x 10, HP water pumps
One (1) 600 gallon fuel tank w/ 2 x pumps
Three (3) air hoist 11,,000lbs
One (1) Pason Automatic Driller
Pit pump 25 HP 3x4x11” Imp,

One (1) Hydraulic Power Tong
Two (2) Hydraulic Cathead
One (1) set B-Type Tong
One (1) set Elevator Links, size 3 -1/2” × 144” x 500 tons
One (1) Drill Line Spooler, Hydraulic Drive
One (1) set CCTV Monitoring System

One (1) set Drilling Instrumentation System
One (1) set HPU & Controls
One (Casing Stabbing board
One (1) set Catwalks & Pipe Racks
One (1) Drill Floor Tool Elevator.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------
Search words (for official use only) -
SCR Land Drilling Rig for Sale
Land Rig Sellers
LS National Oilwell SCR Rig - 2000HP
SCR Land Rig - 2000 HP - National Oilwell
2000HP Land Rig Builder
Land Rig Brokers
Land Drilling Rig 2000HP for sale
New 2000hp Drilling Land Rig For Sale
2000HP Land SCR Rig For Sale
SCR Rig Builders
-----------------------------------------------------------

LS National Oilwell New SCR Land Rig - 2000hp - for sale

ID 666

Gardner Denver 14W Drilling Rig for Sale

Worldoils Marketplace

Gardner Denver 14W Drilling Rig - For Sale

ID 1205

2008 Built Howard Turner HTB3KDD Drilling Rig

Worldoils Marketplace

Howard Turner HTB3KDD Drilling Rig For Sale

ID 2670

Worldoils Marketplace

Worldrigs ID: WR996

Reichdrill Drilling Rig -1989 Built For Sale
Reichdrill T-650 Blast Hole Drilling Rig for sale

Model : T-650 Blast Hole Drill Rig
Manufacturer : Reichdrill
Year : 1989
Condition : Used

Description :

1989 Reichdrill T-650 Blast Hole Drill Rig
1100 CFM / 350 PSI Air Compressor
Rebuilt Cummins KT Diesel Engine
Mounted on an International truck
Rebuilt - Cummins L10 Diesel Engine
DTH Hammer included

Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Drilling Rig - Reichdrill T-650 Blast Hole - For Sale
1989 Built Reichdrill T-650 Blast Hole Drilling Rig For Sale
Land Drilling Rig for Sale
Used Drilling Rig for Sale in USA
Used Reichdrill Drilling Rig for Sale in USA
----------------------------------------------------------------------------------------------------------

Reichdrill T650 BH Drilling Rig for Sale

ID 996

Worldoils Marketplace

Gus Pech 900XHR Drilling Rig - For Sale

ID 2667

Davey M8A Table Drive Drilling Rig for Sale

Worldoils Marketplace

Davey M8A Table Drive Drilling Rig for Sale

ID 2662

Worldoils Marketplace

Worldrigs ID: WR836

Schramm T500XD Drilling Rig for Sale
Used 2013 Built Schramm T500XD Drill Rig

Model : T500XD Drill Rig
Manufacturer : Schramm
Year : 2013
Condition : Used

Description :

2013 Schramm T500XD Drill Rig
1,500 HP Drilling Rig
Fluid Pressure Rating: 7,500 psi

Power Unit :

MTU 12V -2000 engines, 760 bhp (567 kw) @ 1,800 rpm with electric start
Dual core, side by cooling package, 130”F ambient rating
220 gallon diesel fuel tanks
Hydraulic pump systems, with each including (8) piston pump systems
and (1) gear type pump
(1) 1,000 gallon hydraulic tank with (18) twin element hydraulic tank
with (18) twin element hydraulic tank with (18) twin element hydraulic
tank with (18) twin element hydraulic tank with (18) twin element filters

Sub -Base and Walking System :

Floor Height : 22 ft.
Clearance : 19 ft. under table bushing

Telemast System :

Top Head Travel: 56 ft.
Hook Load : 500,000 lbs. actual Hoist
80,000 lbs pulldown capacity

Tilting Top Drive :

Rotation Speed: 0-140 RPM
Rotation Torque: Up to 35,000 ft-lbs

Rig Floor :

37.5 inch false table adapter and a 27.5 inch Master Bushing

Hydraulic Roughneck :

Make/Break Torque: 60,000 ft -lbs @ 3,500 psi
Loadsafe XD Pipe Handling System

Mud Pumps :

(2) Gardner Denver PZ-11HP 1,000 HP / 7,500 PSI

Power :

One, Detroit diesel 16V2000P EPA Tier 1 One

Standard Accessories :

Water injection system, rated 35 gpm @ 1,000 psi
DTH lubricator rated up to 5 gph (19 lph ) @ 1,000 psi ) @ 1,000 psi
Air manifold for air drilling operations
Air/mud fluid lines, 4 inch stand pipe and traveling hose for
7,500 psi operation
Explosion proof 240V lighting for nighttime operation
(customer supplied generators) BOP handling system,
carriage and trolley rated 40,000 lbs.
Support Equipment :
40ft Conex BoX : with spare parts for Rig

Trip Tank :

Fabricated skid mounted tank with (40 bbl. of capacity) 4 x 3 centrifugal pump

Mud Pits :

Schramm T500XD Drilling Rig - For Sale

ID 836

Davey M8 Table Drive Drilling Rig for Sale

Worldoils Marketplace

Worldrigs ID: WR2661

Davey M8 Table Drive Drilling Rig for Sale
Drilling Rig - Davey M8 Table Drive

Model : M8 Drill Rig
Manufacturer : Davey
Condition : Used

Description :

Davey M8 Table Drive Drilling Rig for Sale

ID 2661

Chinese New Land Drilling Rig - Electric VFD

Worldoils Marketplace

Worldrigs ID: WR506

Electric Drilling Rig for Sale
Chinese New Land Drilling Rig - Electric VFD
2700hp VFD Land Drilling Rig

General Description :
Built : 2007
Rig rated dept : 5,000m - 7,000m for nominal drilling DP 5"
Travelling system : 6 x 7 (sheaves)
Available height of derrick : 150 ft

Rig floor dimension / height of drilling floor:
40 ft x 42 ft / 30 ft

Opening diameter of rotary table :
37 1/2 inch

Rated input power of drawworks :
2720 hp or 2,000kW

Capacity of mud pump : 1600hp or 1193 kW
Power transfer type : AC, VFD
Accommodation : 150 persons

Drilling Equipment :
Mast :
Model JJ 450/45-K11 : Type II consist of five sections, 150 ft dear height
Top span (Front x side) 2.2m x 2.2m
Bottom span (Front x side) 9m x 2.7m
Max. hook load 450t or 1,210,000 lbs

Racking Platform :
Designed for 03 different heights : 24.5m, 25.5m, 26.5m away from
drill floor surface.

Racking Board :
7000m (5" DP/HWDP 250 stands including DC)
10 stands of : 6" DC
10 stands of : 9 1/2" DC

Drawworks :
2720 hp or 2,000 kW
Driven by two AC VF motor
Max pull fast line : 485 kn
Wire rope : 38mm dia.
Air cool hydraulic disc brake : PS80

Crown Block :
Model : TC450-7
Max hook load : 450 kn (450t)
OD of sheave : 1524mm
Diameter of drilling line : 38mm
No. of sheave : 7
No. of sand line sheave : 1
Diameter of sand line : 14.5mm

Travelling Block :
Model : YC450
Max static load : 4500kn (450t)
OD of sheave : 1524mm
No. of sheave : 6

Rotary Table :
Model : ZP375
Table opening diameter : 37 1/2"
Max static load : 5850kn
Max speed : 300 rpm
Rate power : 600 Volt
Gear ratio : 3.56

Kelly :
Hex kelly / 5 1/4", 3 1/2"

Topdrive :
Model : NOV/TDS-11SA/Electrical/800hp
Hoisting capacity : 500 ton
Output torque continuous : 37,500 ft.lbs (800 hp)
Tool torque (intermittent @ stall) : 55,000 ft.lbs
Max speed : 228 rpm
Drilling motor : AC 575 VAC (2 x 400 hp)
Make up torque : 47,000 ft.lbs
Break out torque : 55,000 ft.lbs

Mud Pumps :
Model : HHF 1600
Input power : 1600 hp (1193 kW)
Max cylinder diameter : 7"
Length of stroke : 12"
Rate No. of stroke : 120 spm
Three triplex single acting piston, HHF - 1600

Solid Control :
Shale shaker : FCL-2000-3/rated 525 gpm
De-sander : DSV-10-3/rated 1280 gpm
De-silter : S-416-S/rated 1280 gpm
Degasser : FLO 1200 /4 cbm/m
Mud cleaner : FLC-2000

BOP's Stack :
Shaffer 21 1/4" BOP 2,000 wp including:
01 Annular 2,000 wp
01 double Ram 2,000 wp

Shaffer 13 5/8" BOP 10,000 wp including:
01 Annular 5,000 wp
01 Double Ram 10,000 wp
01 Single Ram 10,000 wp
Comply with lifting BOP swl 2 x 30 ton

Trip Pump :
Model : SB3" x 4" - 11
No. of pump : 2 set
Rate capacity : 81 cbm/h

BOP Control System :
Type : FKQ 960-7
Accumulator : 24 Pcs, 11 gallons/bottle
Including : 01 triplex pump and 02 air pumps
Working pressure : 3,000 psi
Total : 264 gallons
Guanchau Petroleum China/ FKQ 960-7, 3000 psi

Choke Line :
Make : Shaffer/Cameron valves
Working pressure : 3,000 PSI - 10,000 psi
Working medium : Oil (gas), Mud, H2S, CO2
Main bore size : 3 1/16", 4 1/16"
According with API 6A, 16C

Iron Roughneck ST-80 :
Model : ST-80
Make : Varco/NOV
Connection range OD : 4 1/4" - 8 1/2"
Handle drill pipe OD : 3 1/2" - 6 5/8"
Spin speed : 90 rpm
Max hydraulic pressure : 2,500 psi
Make up torque max : 60,000 ft.lbs
Break out torque max. 80,000 ft.lbs
Turn able type

Storage capacity :
Diesel Fuel :
No. of Tank : 2 tanks/80 cbm/tank
Total : 160 cbm
Transfer pump : 2.2 kW

Drilling water :
No. of Tank : 2 tanks/80 cbm/tank
Total : 160 cbm
Transfer pump : 7.5 kW

Mud tank :
2,500 bbls

Power Equipment :
Generator :
Type : SR4B
No. of Gen. : 04 set (01 back up)
Capacity : 1714 kva
Rate voltage : 600 vac

AC distribution / transformer :
ABB/AC S800, transformer SUNTEN/SC B9-1600, 600vac/380vac

Emergency generator :
Diesel/380V/50HZ/400 kva/ CAT 3406-01

Diesel :
4 set CAT 3512B DITA

Power Slip PS-21 :
Make : Varco/NOV
Working pressure max. : 2,500 psi
Pipe size : 2 3/8" - 14"
Pipe weight : 500 ton

Fits into : 37 1/2" Varco/NOV RT
Max. back up torque : 45,000 ft.lbs
Max. back up torque on locks : 120,000 ft.lbs

Cranes :
Type : QY50B truck crane
Max. Total rated lifting load : 50 tons

Forklift :
Rated Hoist Capacity : 12 T

Subject to prior sale

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------
Search words (for official use only) -
Electric Drilling Rig for Sale
New Chinese Made Land Rig
Chinese new VFD Drilling Rig
2700hp Drilling Rig
2700hp Electric Land Drilling Rig
New Chinese Drilling Rig
----------------------------------------------------------------