Landrigs for Sale - Oil, Gas and Offshore Equipments marketplace, Oil & gas equipments

Untitled Document

Featured equipments for sale

American Augers VR-500 Top Head Drive Drilling Rig for Sale
2008 Built American Augers Top Head Drive Drilling Rig

Derrick: 99' x 10' 2-piece hydraulic raise 300,000 lb. capacity derrick, rack & pinion
top head drive system rated at 500,000 lb. hook load

Substructure: Hydraulic raise 10' x 10' telescoping substructure by 2-hydraulic cylinders
to a height of 14', with 2-pin 10' x 6' floor extensions, complete with access stairs & safety railing.

Trailer: 4- axle drop deck trailer chassis V.I.N# 1A9SR63498W445060 with 4-hydraulic outriggers,
67' OVAL x 10', air ride suspension, good size 275/70R22.5 tires, rear pin-on 2008 Trail King
tandem model TKAB2-192 axle stinger dolly V.I.N# 1TKS019269B108491 rated at 50,000 lb.
GVWR, with good size 275/70R22.5 tires, 9' 10" x 3' x 57' 2-piece ramped drive-on rig base
that include 2-14' x 10' & 1-11'6" pin on side base supports.

Rig Power: 2-hydraulic power units mounted inside two 8' x 40' x 8'6" custom built containers
with Cat C-18 diesel engines, hydraulic pumps, hydraulic tank reservoirs, portable suit case

HPU Units: In good condition showing 6,379 hours on HPU unit A & 164 hours on HPU unit B.

Dog House: Self-erecting elevated 8' x 20' x 8'6" insulated dog house with wall mounted
HVAC unit, swivel operator's chair with integrated arm rest joy stick controls, Pason rig
display, monitors, explosion proof lightning. Iron Rough Neck hydraulic pipe wrench system.

Pipe Handling System: Hydraulic range III pipe handling system that includes 2-indexing pipe racks.

Auxiliary Equipment: Other support is available at additional pricing depending on desired need
or requirements needed by the prospective buyers. The list is as follows:

1.) 2008 Stanton Dynamics 45’ x 8’ Tri-Axle Dog House Trailer with heat, lockers, cabinets,
benches, explosion proof lighting, & front porch.
2.) 2-2006 PZ-9 Triplex Mud Pumps with 12V2000 Detroit diesel engines, air clutches,
air starters, safety shut down system, quick change caps, lubrication, centrifugal charge
pumps, pulsation mounted on oilfield skid bases. With 9,500 hours.
3.) Mud Pit System consisting of 1-500 barrel 3 compartment mud tank and 1-200 barrel 2
compartment mud tank with circulating pumps, safety railing and access stairs.
4.) 2-2009 Ingersoll-Rand 1170-350 High Pressure Air Compressors with Cat C-15
diesel engines, heat exchangers after coolers, mounted on oilfield skid bases
with 5,000 hours.
5.) 2-2009 Aerial JGQ/2 Air Boosters with Cat c-7 diesel engines, heat exchangers,
mounted on an oilfield skid base with 5,000 hours.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------------
Search words (for official use only) :
American Augers VR-500 Top Head Drive Drilling Rig for Sale
2008 Built American Augers Top Head Drive Drilling Rig
Top Head Drive Drilling Rig for Sale in USA
American Augers VR-500 Drilling Rig for Sale
2008 Built Top Head Drive Drilling Rig for Sale
--------------------------------------------------------------------------------------------------------------

American Augers VR-500 Drilling Rig for Sale

ID 508

Reichdrill T-650-W Drilling Rig - 1986 Built - for Sale

ID 529

Worldoils Marketplace

Worldrigs ID: WR776

Ingersoll-Rand T3W Drill Rig for Sale
1994 Built Used Drilling Rig for Sale

Model : T3W Drill Rig
Manufacturer : Ingersoll-Rand
Year : 1994
Condition : Used

Description :

1994 Ingersoll-Rand T3W
CAT 3406C diesel deck engine (7,000 hours since rebuilt)
IR 825 cfm / 350 psi Air Compressor (4,300 hours since rebuilt)
8,000 lb rotary head
7 rod carousel
rod box
25 GPM Water Injection Pump
Hammer Lubricator
18,000 lb single line winch
Newer Tires
Newer Paint
Mounted on a Ford L9000 Truck
CAT 3176 diesel engine
Eaon 13 speed transmission
9,106 miles on odometer (may be incorrect)
Note: Rig was thoroughly reconditioned by manufacture in 2015 and has only been used a
few hours since

Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words(for official use only) :
Ingersoll-Rand T3W Drill Rig for Sale
1994 Built Drilling Rig Ingersoll-Rand T3W For Sale
Used Drilling Rig for sale in USA
Ingersoll-Rand Oilfield Drilling Rig for Sale
Land Drilling Rig - 1994 Built For Sale
---------------------------------------------------------------------------------------------------------

Ingersoll-Rand T3W Drill Rig for Sale

ID 776

Worldoils Marketplace

Worldrigs ID: WR624

VFD Land Rig for Sale
1500HP Chinese Land Drilling Rig
New Chinese 1500HP Land Rig

General description :
Rig type : ZJ50
Rig rated dept : 2800~4500m (127mm DP), 3500~5000 (114mm DP)
Traveling system : 6 x 7 (sheaves), parallel
Available height of derrick : 150 ft
Rig floor dimension / height of drilling floor : 39ft x 36ft / 30ft
Opening diameter of rotary table :
952.5mm (37 1/2 inch) or 698.5mm (27 1/2 inch)
Rated input power of drawworks : 1610 hp or 1200kW
Capacity of mud pump : 2 x 1600 hp
Power transfer type : AC-DC-AC, one on one control

Drilling equipment :
Mast :
Model : JJ315/45-K
K style, cantilever beam leg mast, 150 ft clear height
Top span (front x side) 2.1 m x 2.05 m
Bottom span 8 m
Max hook load 3150 kn or 700,000 lbs

Drawworks :
1610 hp or 1200 kW
Driven by two AC VF motor
Max pull fast line : 340 kn (75,000 lbs)
Wire rope : 35mm
Air cool hydraulic disc brake : PS80

Crown block :
Model : TC315
Max hook load : 3150 kn (700,000 lbs)
OD of sheave : 1270mm (50")
Diameter of drilling line : 35mm
No of sheaves : 6+1

Traveling block :
Model : YC315
Max static load : 3150 kn (700,000 lbs)
OD of sheave : 1270mm (50")
No of sheaves : 6

Rotary table :
Model : ZP375
Table opening diameter : 37 1/2"
Max static load : 5850 kn (1,290,000 lbs)
Max speed : 300 rpm
Rate power : 600 volt
Gear ratio : 3.56

Top drive :
Model : NOV/TDS-11SA/Electrical/800 hp
Hoisting capacity : 500 t
Output torque continuous : 37,500 ft-lbs (800hp)
Tool torque (intermittent @ stall) : 55,000 ft-lbs
Max speed : 228 rpm
Drilling motor : AC 575 VAC (2 x 400 hp)
Make up torque : 47,000 ft-lbs
Break out torque : 55,000 ft-lbs

Mud pumps :
Model : HHF-1600
Input power : 1600 hp (1176 kW)
Max cylinder diameter : 7" or 180mm
Length of stroke : 12" or 305mm
Rate no. of stroke : 120 spm
Three triplex single acting piston, HHF-1600

Solid control :
Shale shaker : Derrick FLC-503/rated 60L/s
Desander : DSV-10-3/rated 1280 gpm
Desilter : S-416-S/rated 1280 gpm
Mud cleaner : Derrick FLC-503-3P

Mud tank : 300 cub.mt

Generator :
Type : SR4B
No. of gen. : 03 set (01 back up)
Capacity : 1900 kva
Rate voltage : 600 vac

AC distribution / transformer :
ABB, dry transformer 1250 kva, 600v / 400v

Emergency generator : 1 set CAT3406
Diesel : 3 set CAT3512B

BOP stack :
21 1/4" BOP 2,000 wp including :
01 annular 5,000 wp
01 double ram 2,000 wp
13 5/8" BOP 10,000 wp including :
01 annular 5,000 wp
01 double ram 10,000 wp
01 single ram 10,000 wp
Comply with lifting BOP swl : 2 x 25 ton

Warranty :
Guarantee period shall last for 18 months counting from the delivery date
or 12 months from the commencement of operation at the well site,
which expiration date comes earlier/

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

--------------------------------------------------------------------------------------------
Search words(for official use only) -
VFD Land Rig for Sale
New 1500hp Chinese Rig
1500hp Land Drilling Rig From China
Chinese 1500HP VFD Land Drilling Rig
Chinese Rig Builders
Chinese 1500hp Land Rig Builders
1500hp new Land Rig From China
New 1500hp Chinese Drilling Rig
-------------------------------------------------------------------------------------------------------------------------

VFD Land Drilling Rig Chinese - 1500hp - for sale

ID 624

Chicago-Pneumatic 650 Drill Rig for Sale

Worldoils Marketplace

Worldrigs ID: WR772

Chicago-Pneumatic 650 Drill Rig For Sale
Used Drill Rig Chicago-Pneumatic 650

Model : 650 Drill Rig
Manufacturer : Chicago Pneumatic
Condition : Used

Description :

Chicago-Pneumatic 650 Drill Rig
CP 450 CFM / 250 PSI Piston Compressor with 750/350(?)
Booster (air clutch needs newdiapragm)
Tiger Tierra Casing Driver
Carousel

Package Includes:
300’ ft of used drill pipe (some need new pins and boxes)
6” and 9” DTH Hammers
6” Tricone button bit

Spare Parts included; main pumps, top head motors, inner cooler, valves for
the compressor, new drive chain for the transfer case

Rig in working order, some oil leaks (packings need replaced).
Mounted on a 1973 International Paystar truck

Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------------
Search words(for official use only) :
Chicago-Pneumatic 650 Drill Rig For Sale
Chicago-Pneumatic Used Drilling Rig For sale
Land Drilling Rig For sale in USA
Chicago-Pneumatic 650 Used Drill Rig
Drilling Rig - Chicago-Pneumatic 650 For Sale
Used Drilling Rig For Sale in USA
-------------------------------------------------------------------------------------

Chicago-Pneumatic 650 Drill Rig for Sale

ID 772

Brewster N10 - 1000hp Land Drilling rig For Sale

Worldoils Marketplace

Worldrigs ID: WR491

Brewster N10 - 1000HP Land Rig For Sale
Used American 1000Hp Land Drilling Rig
American 1000HP Land Rig
Used Brewster land Rig for Sale

Brewster N-10 :

1000 HP MECHANICAL DRILLING RIG

Drawworks :

Brewster N-10 Single Drum Drawworks, S/N-N/A, 1,000-HP, Grooved f/1-1/8"
Drilling Line, Make-up & Breakout Catheads, Rotary Table Drive,
PARKERSBURG 46" Hydromatic Brake, Driller’s Console with Controls.

Drawworks Power :

2-Engine In-Line Compound, p/b (2) DETROIT Series 60 Diesel Engines,
550-HP, S/N-N/S, Each with starter, Radiator, Gauges, Torque Converters,
QUINCY 350 Air Compressor, Skidded.

Mast :

FPI, INC., (LC MOORE Design), 18’6" W x 131’L Cantilever Mast, 450,000" SHL,
10 Line Crown Block with Sheaves, Fastline Sheave, Grooved f/1-1/8" Line,
Crown Safety Platform, Racking Board, Tong Counter Weights, Standpipe,
Standpipe Manifold with Values.

Substructure :

DSI 16’ H x 17’10"W x 42’6"L Box-On-Box Structure, S/N-N/A, 350,000# Setback
Capacity, with 12" x 18" Rotary Beams, Deadline Anchor, Stairs, Safety Rails,
Skidded, 13’6" Clear Height.

Mud Pumps :

WEATHERFORD MP-10 Triplex Mud Pump, S/N- #W-105, 1,000-HP, with
Steel Fluid End, Quick Change Valve and Cylinder Head Caps, Suction &
Discharge Manifolds, WEATHERFORD Pulsation Dampener, Centrifugal
Charging Pump p/b 50-HP Electric Motor, O-Drill 3" Shear Relief Value,
Master Skidded, p/b CAT D398 Diesel Engine, S/N-66B03715, 1,000-Hp,
with Air Starter, Radiator, Gauges, Pump Drive, Air Clutch, Skidded.

WEATHERFORD MP-10 Triplex Mud Pump, S/N-#W-139, 1,000, with Steel
Fluid End, Quick Change alve and Cylinder Head Caps, Suction & Discharge
Manifolds, WEATHERFORD Pulsation Dampener, Centrifugal Charging Pump
p/b 50-HP Electric

Motor, O-Drill 3" Shear Relief Valve, Master Skidded, p/b CAT D398 Diesel
Engine, S/N-35Z01062, 1,000-HP, with Air Starter, Radiator, Gauges, Pump
Drive, Air Clutch, Skidded.

Traveling Equipment :

SOWA 250-TON Traveling Block/Hook Combination, with (5) Sheaves,
Grooved f/1-1/8" Line

Elevator Links

Rotating Equipment :

IDECO 23, 23 1/2" Rotary Table with Split Master Bushing

BREWSTER 6-S Rotary Swivel

5-1/4" Hex Kelly, Kelly Drive Bushing, Upper & Lower Kelly Safety Valves

Well Control Equipment :

11", 5,000# PSI Annular Blowout Preventer

11", 5,000# PSI Blowout Preventer, CHINA-XINDE,with 4-1/2" Drill Pipe and
Blind Rams

Koomey 5 Station, 180 Gallon Blowout Preventer Closing Unit, with Triplex
Pressure Pump p/b Electric Motor, (2) Air Pumps, (10) Accumulator Bottles,
Hydraulic Reservoir, Skidded.

5,000# PSI Choke Manifold with (2) 4-1/16" Gate Valves, (2) 2" Manual
Choke Valves, 4-Way Cross, Skidded.

Choke Line with (2) 4-1/16" Gate Valves, Kill Line with (2) 2-1/16" Gate Valve.

Rig Houses :

7’6" W x 29’L Top Dog House with 5’L Skid Extension, Knowledge Box, Lockers,
Parts Storage, Fluorescent Lights, Heater, Air Conditioner, Wiring,
Connections, Skidded.

AMERITECH 14’ W x 44’ L Crew Quarters, Skidded.

IDLE TIME 8’ W x 34’ L Tool Pusher’s Trailer, Furnished.

Generators :

MARATHON 572RSL4025 Electric Generator, 380-KW, S/N-WA-549536-1205,
p/b DETROIT Series, S/N-N/A, with Electric Starter, Radiator, Gauges, Skidded.

6’ W x 10’ W x 40’ L Mud Suction Tank, 412-Barrel Capacity, (2) 5" x 6"
Centrifugal Mixing Pumps, Each p/b Electric Motor, Top Mounted Walkways,
Stairs, Safety Rails, Skidded.

MARATHON 572RSL4025 Electric Generator, 375-KW, S/N-N/A, p/b DETROIT
Series 60 Diesel Engine, S/N-N/A, with Electric Starter, Radiator, Gauges, Skidded.

All Above Mounted in 9’11" W x 37’5" Generator House, with
WESTINGHOUSE Electrical Control Panel, SQUARE D Transformer,
GARDNER DENVER PL Series Air Compressor, Lights, Wiring, Electrical
Connections, Skidded.

Mud System :

6’ W x 10’ W x 40’ L Mud Shaker Tank, 412-Barrel Capacity, (2) 5" x 6"
Centrifugal Mixing Pumps, Each p/b Electric Motor, Top Mounted Walkways,
Stairs, Safety Rails, Skidded.

FLUID SYSTEMS Shale Shaker 9’4" Diameter x 28’L 10,000-Gallon Diesel Fuel Tank, with Fuel Transfer Pump,
p/b Electric Motor, Filter, Skidded.

Desander with (2) 10" Cones, Desilter with (10) 4" Cones.

Water/Fuel Tanks :

9’ W x 9’5" H x38’ L 552- Barrel Water Tank, with 2" x 3" Centrifugal Transfer
Pump, p/b Electric Motor, Skidded.

4’ H x 4’ W x 6’9"L 4-Compartment Lubester, Skidded.

Auxilliary Equipment :

Type B Rotary Tongs, with extra Heads

Drill Pipe & Drill Collar Elevators, Drill Pipe & Drill Slips, (2) Safety Clamps

TFI 5,000# Capacity Air Hoist

MD TOTCO Weight Indicator

SATELLITE Automatic Driller

TOTCO 4- Pen Drilling Recorder

MD TOTCO Drift Indicator

Mud Bucket

3-1/2: ID x 60’L Rotary Hose, (2) 3-1/2"ID x 6’L Vibrator Hoses,
(2) 10"ID x 10’L Suction Hoses

1-1/8" x 5000’ L Drilling line with Spool, Stand

5 Star Electric/Hydraulic Wireline Unit, with 12,000 of .092" Line

42" H x 7’W x 42’ L 2-Section Catwalk, with Steel Deck, Skidded

4-Sets (8-Each) 42" H x 28’ L Pipe Racks

36" H x 7’6"W x 14’6"L Junk Box, Skidded

Rat Hole & Mouse Hole Boots

Assorted Drill Pipe & Drill Collars Subs

Fluorescent & Mercury Vapor Rig Lighting, Wiring, Electrical Connections

Assorted Spare Parts, Tools, Safety Equipment, Etc.

Tubulars :

6,304’ (197 JOINTS) of 4-1/2" 16.60#, Range 2, Grade E, BN Drill Pipe,
with 4-1/2" XH Connections

(21) 6-1/2" x Approximately 30’L Drill Collars, with 4-1/2" XH Connections

(4) 8" x Approximately 30’L Drill Collars, with 6-1/2" Reg Connections

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------
Search words (for official use only) -
Brewster N10 - 1000HP Land Rig For Sale
1000HP Land Rigs for Sale
U.S. Used Rigs For Sale
Used Land Drilling Rigs
Land Drilling Rigs For Sale
Used American 1000Hp Land Drilling Rig
Used Land Oil Drilling Rigs
Gas and Oil Drilling Rigs
US made Land Drilling Rigs
------------------------------------------------------

Brewster N10 - 1000hp - Land Drilling rig For Sale

ID 491

Skytop RR 400 Double - 4200m Workover Rig

Worldoils Marketplace

Worldrigs ID: WR638

Skytop RR 400 Double - 4200m - Used Workover Rig - For Sale
Workover Rigs For Sale
4200m Used Workover Rigs For Sale

Skytop RR400-H1-4210A-38
Self-propelled, double drum,back-in
Rated capacity at 4,200 m w/73 mm tubing
Engine - detroit diesel 8V-92
(268 kW/360 hp)
Transmission - allison CLT 5860 - 6 speed
Main drum brakes - 25.4 cm x 106.7cm
Hydromatic brakes –
Parmac 122 w/1,500 l fluid capacity
Sand line brakes - 20.3 cm x 96.5 cm
Mast - skytop 107-180 X f rated 80,000 daN w/six lines
Racking capacity - 4,200 m – 73 mm double tubing
4,400 m - 19 mm triple rods
Travel blocks - McKissick 73A 100 ton c/w spring
Lights - vapour - proof incandescent
& quartz floods
Drilling line - 25.4 mm x 518 m wire rope
Sand line - 14 mm x 3,700 m wire rope
Weight indicator

Combination :
3.05 m x 12.2 m steel building
3.05 m x 4.8 m change house
3.05 m x 4.6 m tool house
3.05 m x 2.7 m generator house
55 kW - Isuzu diesel generator

Handling equipment :
Foster 58 - 93 tubing tongs c/w air back-up
Cavins model C power air slips
BJ elevators
Standard equipment - 60.3 mm & 73 mm EUE tubing
19 mm - 25 mm sucker rods
2 - 2.4 m x 13.7 m rig mats
Catwalk w/2 sets of pipe racks

Safety equipment :
4 - 14 kg dry chemical fire extinguishers
2 - self-contained breathing apparatus w/spare cylinder

Gas detector
Safety & directional signs
Electrical ground bonding equipment
1 stretcher
Crown saver
Pipe ram saver
2 self retracting lifelines

BOP equipment :
AEUB class III BOP
152 mm - 35,000 kpa shaffer spherical
152 mm - 35,000 kpa shaffer LWS with valve
Rucker - 340 l - 21,000 kpa accumulator w/3 station controls
& nitrogen back-up system
Hoses, remote station
73 mm EUE - 35,000 kpa tubing safety valve
89 mm rod BOP c/w handles
HD hydraulic oil saver
76 mm x 9.1 m swab lubricator w/jars & tool trap
76 mm swabbing valve - 21,000 kpa

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words(for official use only) -
Skytop RR 400 Double - 4200m Used Workover Rig for sale
Used American Workover Rigs
Workover Land Rigs in USA
Used 4200m Skytop RR 400 Double Workover Rig for Sale
Land Workover Rigs For Sale
Workover Rig for sale
Skytop RR 400 Double (4200m) for sale
-----------------------------------------------------------------------------------------------------------

Skytop RR 400 Double - 4200m - Used - Workover Rig - For Sale

ID 638

Worldoils Marketplace

Worldrigs ID: WR510

Drilling Rig Builders
American Rig Builders
Rig Builders
Land Rig Builders

We offer all kinds of New Build Drilling Rigs of 500HP to 3000HP at competitive prices

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

--------------------------------------------------
Search words(for official use only) -
Drilling Rig Builders
American Rig Builders
Rig Builders
Land Rig Builders
------------------------------------------------

Land Rig Builders - for sale

ID 510

Worldoils Marketplace

Worldrigs ID: WR592

UMD 90 Land Drilling Rig - For Sale in Europe
New Semi Mobile Drilling Rig For Sale - UMD 90

Main Technical Specifications
Engine type : C 13 ACERT
Nominal engine power hp (kW) : 415 (309)
Transmission : Allison 4500 OFS
Nominal hoisting capacity metric ton (lbs) : 90 (198000)
Workover depht (m) drill pipe (2 7/8”) : 4500
Drilling depht (m) (4 1/2“) : 1500
Rope diameter (mm) : 26
Mast height (m) : 32
Drilling floor height (m) : 5
Travelling system : 4x3
Working pressure (mpa) : 0, 65-0, 8

Technical Specifications
Drawworks
Main Drum -
Input power (hp) : 450
Barrel size : D18” W38”
Brake rim size : D44” W12”
Wire line size : 1 ” (26 mm)
Drum speed : 6F/1R
Brake cooling : Water circulation
Brake system : Band / disc / auxiliary (Parmac SSR-28 hydro-brake)
Chain drives :
All chains are fully encloded for oil bath lubrication ensuring longer life
and cleaner operation

Lubrication : Automatic or manual
Drum clutch : Air flex type

Sand Line Drum -
Barrel size : D13” W37“
Brake rim size : D44” W9½”
Spooling capacity : 16114’
Sand line wire size : 9/16” (14 mm) - 5/8” (16 mm)

Rig Power & Transmission
Diesel engine(s) : Caterpillar C-13 ACERT, 415Hp, 2.100rpm
Transmission(s) : Allison OFS 4500 series with torque converter
Right angle gear box : Min 500 hp gear box in oil bath gear case
Compound box :
Twin engine drive through transmission includes disconnect clutches at
compound shaft for engines

Mast & Crown Block
Mast -
Mast complete set : Design and conform to APİ 4F specification
Mast height : 32m ( 118ft )
Max. static hook load capacity : 900kN ( 198.000lbs )
Racking capacity : 1.500m ( 4 ½’’ DP，19.2m double )
Height of the monkey board : 17.2m ( from floor )
Accessories : Standpipe , exproof lightning....etc
Mast type : Hydraulic telescopic

Crown Block -
Crown block complete set : Design and conform to APİ 4F specification
Max. hook load : 900kN (198.000lbs )
Number of sheaves : (2) Main + (1) fast line + (1) deadline + (1) sandline
+ (2) sheaves for service winch

Sheaves OD :
Fast Lines Ø32" ( Ø813mm )
Dead Line Ø28" ( Ø711mm )
Sand Line Ø28" ( Ø711mm )

Dia. of sheave’s grove :
Fast & Dead Lines Ø1" ( Ø26mm )
Sand & Winch Lines Ø 5/8" ( Ø16mm )

Traveling Block & Hook
Traveling block : 900kN Max. statik load, 3 sheaves, Ø32’’ sheaves
dia. Ø1’’ (Ø26mm ) groove dia.

Hook : 900kN Max. statik load, 3tons spring stroke
Elevator link(s) : 900kN rated load capacity.

Swivel
Static hook load, ton : 90
Working pressure, psi : 5,000
Maximum speed, rpm : 300
Coupling thread to stem : 4-1/2" Reg LH
Coupling thread to kelly : 6-5/8" Reg LH
Stem İ.D. : 2-1/2"

Trailer & Other Systems
Trailer :
Three axles semi mobile trailer, 12 wheels, fabricated high tensile steel vehicle
frame reinforced at points of greatest stress. Highway equipment and cab included.
Installed fuel tank. Tool box. Auxilary drill line drum, all axles dressed brake, folding
walkwayss on both sides of trailer.

Hydraulic jacks : Four hydraulic operated leveling jacks
Hydraulic service winch : 5 metric tons drum pull capacity
Deadline anchor : Deadline anchor attached directly to trailer frame

Hydraulic system :
Hydraulic pump, system operate hydraulic cylinders on mast, hydraulic jacks, hydraulic
pipe tong, and hyraulic winch. Control valves, hydraulic oil tank, filters, pipes, hydraulic
and air valve connections, fittings.

Air system :
Compressor (engine drive), air tank, relief valves, air dryer, gauges, all clutches

Electrical lighting system :
All the electrical equipments on the mast, and substructure are ex-proof type

Instrumentation :
Driller control panel, weight indicator, gauges, air valves, cables, hoses, fittings, transducers,
paint

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------
Search words(for official use only) :
UMD 90 Land Drilling RigRig For Sale
New Semi Mobile Drilling Rigs
Land Drilling Rigs For Sale
New Land Drilling Rig
New UMD 90 Drilling Rig For Sale in Europe
-------------------------------------------------------------------

UMD 90 New Land Drilling Rig - for Sale

ID 592

Worldoils Marketplace

Worldrigs ID: WR828

CME-92 Drill Rig for Sale
Used Drilling Rig for Sale in USA

Model: CME-92 Drill Rig
Manufacturer: CME Drill
Condition: Used

Description :

CME-92 Drill Rig
Deck Engine
Mounted on a 5 Ton Chassis Truck
Ford Gas Engine (Model CSG-649P-6006-E)
511,600 km
3 Hydraulic Leveling Jacks
No Tooling or Hammer will be provided with the unit

Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
------------------------------------------------------------------------------------------------------------------
Search words(for official use only) :
CME-92 Drill Rig- for Sale
CME Drill Rig for Sale in USA
Land Drilling Rig for Sale in USA
CME 92 Used Drilling Rig for Sale
Used CME Drilling Rig for Sale
-------------------------------------------------------------------------------------------------

CME-92 Drill Rig - for Sale

ID 828

Worldoils Marketplace

Worldrigs ID: WR495

Cabot 750 Mobile Carrier Rig for Sale
Used Cabot 750 Land Rig
Cabot 750 Refurbished Drilling Rig
Mobile Land Rig For Sale

Self propelled carrier specifications mechanical drive arrangement

Model 2042 drawworks specifications mechanical drive arrangement

Drawworks Horsepower Rating : 550-700
Drum Dia. x Length : 19 5/8" x 40"
Grooving-Counterbalanced LeBus : 1 1/8"
Brakes, Water Cooled (Dia. x Width) : 42" x 12"
Effective Brake Area : 3,050 Sq.Inches
Hoisting Speeds : 5 Forward, 1 Reverse
Rotary Speeds : 5 Forward, 1 Reverse
Parmac Brake : 202 or equivalent

Drum Clutch : PO 24" 2 Plate
Rotary Clutch : PO 18" 2 Plate
Brake Clutch : Positive Jaw
Drum Drive Chain : 1 1/2" Quad
Jackshaft Drive Chain : 1 1/4" Quad
Rotary Drive Chain : 1 1/2" Double
Brake Drive Chain : 1 1/4" Triple

Model 112-300 Mast Specifications
Type-Telescoping, Hydraulic Raised & Extended, Tilted
Clear Height (with 15' Floor) : 97'-0"
Leg Spread : 7'-6 1/2"
Mast Tilt : 2 3/4 degree
Hook Load Capacity (API Std. 4E) :
6 Lines 281,000#
8 Lines 300,000#

Crown (Std.) :
Fast Line & Dead Line Sheave : 1-36" & 1-30"
Cluster Sheaves : 4-30"
Racking Capacity :
Range 2 Doubles - 4 1/2" OD Drill Pipe, 6 1/2" OD. T.J 9,500'
4" OD Drill Pipe, 6 1/8" OD. T.J 10,000'
Wind Rating with Full Setback : 69mph (60Kts.)
Raising System : Two 3 Stage Double Acting Rams
Extending System : Two 1 Stage Single Acting Rams

Note : Four wind guys to crown and cross guys to racking board are recommended for wind stability.

Substructure Specifications*
Type-Cross-Type, Single Piece, Telescoping
Floor Height : 15'
Bottom of Rotary Beam Clearance : 12'-0"
Floor Size, Length x Width : 13'-8" x 26'-0"
Ground Overall Dimensions, Length x Width : 40'-0" x 12'-0"
Rotary Capacity : 350,000#
Setback Capacity : 200,000#
Total Simultaneously Capacity : 550,000#

*Optional Types Available
Carrier Model : C7-762-293
Wheelbase (from centerline of front triple to centerline of rear triple) : 293"
Type Frame (High strength steel) : 20 3/4" Fab.Channel

Type Suspension :
Front-Spring
Rear-Walking Beam
Third Axile Air

Front Axile : (3) DCB
Service Rating 66,000#

Rear Axile : Triple w/DP 480 P
Service Rating 68,000#

Standard Tires :
Front: 18.00 x 22.5 16 Ply Duplex
Rear : 10.00 x 20 12 Ply Nylon

Typical Rig Field Weights

Front : 57,100#
Rear : 61,800#
Total : 118,900#

Typical Power

Engines (HP @ RPM)

Note : Horsepowers shown are manufacturer's ratings at SAE Standard conditions
(85 degree fahrenheit and 500'altitude). Deduction must be made for fan,
compressors, and intake and exhaust system losses.

(2) DDA 8V-71N @ 304 HP each, Total 608 HP @ 2100 RPM.
(2) Catepillar 3406 @ 360 HP each. Total 720 HP @ 2100 RPM.
(2) DDA 8V-92N @ 360 HP each. Total 720 HP @ 2100 RPM.

5,000'-7,500' Nominal depth range, 4 1/2" D.P., Doubles
700 Horepower. Mechanical Drive : Two engines with torque converters
Electric Drive : one DC traction motor

The 750 Series Drilling Rig has proven itself to be fast moving reliable rig of simple
and rugged construction. It is available in the following forms: A self propelled mechanical
drive rig; a split trailer mechanical drive rig; a split trailer electric drive rig.

As a self propelled mechanical drive rig, the Model 2042 drawworks, telescoping mast,
oil bath chain case elevated ratary drive and two engine rig power are unitized into one
self propelled rig load.

As a split trailer mechanical drive rig, the drawworks and two engine rig power are mounted
on one trailer and the telescoping mast and oil bath chain case elevated rotary drive are
mounted on a second trailer. The two trailer design accomplishes package weight control
where permit limits may cause problems.

As an electric rig, an electric drive drawworks group has been developed using one 700 HP
traction motor for both single and double drum drawworks and for the rotary drive.
The drawworks, motor and hydraulic power unit are mounted in one self propelled package.

Both of the rig arrangements above are combined with a rig base and selection of single
piece or multiple piece substractions to complete the rig. This rig in conjuction with single
load mud pump pacakages with independent power results in an extremely flexible arrangement.

Mechanical Drive Arrangement

Power - Two engines (any make) totaling upto 700 HP at 2100 RPM. The side-by-side
engines are high mounted for easy accessibility and maintenance. Either or both engines
can be used for hoisting, rotary or roading operations.

Torque Converters - Two torque converters individually matched to engines provide
maximum output power for single or two engine operation at full load or part load. Lockup
feature in each converter for maximum efficiency.

Transmissions - Allision HT 750 DR,unitized with torque converters. Five forward speeds.
Finger tip selection at driller's console with full load shift capability allows maximum flexibility
of power application to job at hand.

Compound - v-Type roller chain compound in pressure lubricated oil bath case. Each engine
can be disconnected in compound. Integral gear tranfer chase for vehicle drive.

Drawworks - Model 2042 drawworks with 19 5/8" diameter drum barrel 40" long. 12" x 42"
circulating water cooled brake rims with full Wrap, single point adjusted, fully equalized brake
bands. The easy access outboard drum cluch generates 40,000# single line pull.
Paramac 202 single rotor brake assist with positive action clutch.

Catworks - Hydraulic catworks, including breakout cylinder, spinning and make-up cylinder
and planeatary gear, self-locking handling winch for smooth, safer catheading operations.

Drawworks Drive - Heavy-duty propeller shaft through Model 600 right-angle gear box.

Rotary Drive - Propeller shaft via full air rotary clutch, heavy duty reverse gear box and oil bath
roller chain elevated rotary drive unitized on back face of mast. Simple propeller shaft connection
at rig-up and rig-down. Nominal max. rotary speed-300 RPM.
Nominal working table torque - 30,000 ft. lbs.

Carrier - Mechanical drive rig provided with six axle triple front, triple rear 134,000# capacity
carrier. Designed to meet highway safety standards with necessary toughness for off highway
operations.

Electric Drive Arrangement
The 750E Series rig is designed as an SCR electric powered rig. One GE 761 (or equivalent)
700HP traction motor provides power to both the drawworks and the rotary. The drawworks
drive is a two speed high/low drum clutch arrangement. An optional sand drum assembly may
be mounted in the drawworks group. The rotary drive is taken from the drawworks drive via a
Model 600 right angle gear box. The full air rotary clutch is mounted on a right angle drive
output shaft. A propeller shaft drive and oil bath roller chain elevated drive mounted on the
back face of the mast complete the rotary drive.

Features common to both mechanical and electrical drive
Mast - 112'300,000# API-rated telescoping mast. Dual ram hydraulically raised and extended.
Tubular construcion offering maximum rigidity and capability to withstand abuse. Patented pawl
mechanism assuring positive transfer of load from upper to lower section. Deep mast sections
for maximum torsional stability. Heavy-duty rigid racking board with side-mounted fingers provided
with finger safety locks. Load guylines to engine end of carrier.

Trailer - The mechanical drive and electrical drive arrangement of the 750 Series rig are both
available as trailer type rigs or split rig arrangement.

Substructure - Choice of T-Type telescoping substructure with derrick base and rig base or
stacked fixed height substructure with setback cross base and derrick cross base. 15' high structure.
Either type provides wind guy anchorage eliminating external wind guy anchors.

Hydraulic Power - 35 GPM 2500 psi max. pressure system. Provided by either of two pumps,
one belt driven from front of each engine.

Power Reserve Line Pool - On split trailer versions only of the 750 Series rig, a hydraulic
powered reserve line spool is provided on the mast trailer.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

--------------------------------------------------------------------------------
Search words(for official use only) -
Cabot 750 Mobile Carrier Rig for Sale
Used Mobile Drilling Rigs For Sale
American Cabot Drilling Rigs for sale
American Used Land Rigs for sale
Cabot 750 Land Drilling Rig for sale
Used Land Rigs for sale
Used Cabot Mobile Drilling Land Rig
Refurbished Land Rigs For Sale
--------------------------------------------------------------------------------

Cabot 750 Mobile Carrier Rig - for sale

ID 495

New UMD 160 Land Drilling Rig - For Sale

Worldoils Marketplace

Worldrigs ID: WR596

New UMD 160 Land Drilling Rig - For Sale in Europe
New Semi Mobile Drilling Rig For Sale - UMD 160

Main Technical Specifications
Engine type : 2 X C 13 ACERT
Nominal engine power hp (kW) : 2 X 415 (2 X 309)
Transmission : 2 X Allison 4500 OFS
Nominal hoisting capacity metric ton (lbs) : 160 (352000)
Workover depht (m) drill pipe (2 7/8”) : 6850
Drilling depht (m) (4 1/2“) : 2900
Rope diameter (mm) : 29
Mast height (m) : 36
Drilling floor height (m) : 5-6
Travelling system : 5x4
Working pressure (mpa) : 0, 65-0, 8

Technical Specifications
Drawworks
Main Drum -
Input power (hp) : 900
Barrel size : D24” W42”
Brake rim size : D44” W12”
Wire line size : 1 1/7” (29 mm)
Drum speed : 7F/1R
Brake cooling : Water circulation
Brake system : Band / disc / auxiliary (Parmac SSR-28 hydro-brake)
Chain drives :
All chains are fully encloded for oil bath lubrication ensuring longer life
and cleaner operation

Sand Line Drum -
Barrel size : D13” W37“
Brake rim size : D44” W9½”
Spooling capacity : 16114’
Sand line wire size : 9/16” (14 mm) - 5/8” (16 mm)

Rig Power & Tranamission
Diesel engine(s) : 2 x Caterpillar C-13 ACERT, 415Hp, 2.100rpm
Transmission(s) : 2 x Allison OFS 4500 series with torque converter
Right angle gear box : Min 900 hp gear box in oil bath gear case
Compound box :
Twin engine drive through transmission includes disconnect clutches
at compound shaft for engines.

Mast & Crown Block
Mast -
Mast complete set : Design and conform to APİ 4F specification
Mast height : 36m ( 118ft )
Max. static hook load capacity : 1.765kN ( 352.000lbs )
Racking capacity : 2.500m ( 4 ½’’ DP，19.2m double )
Height of the monkey board : 17.2m ( from floor )
Mast type : Hydraulic telescopic
Accessories : Two (2) X hydraulic catheads, Two (2) X tong weight boxes,
standpipe, exproof lightning....etc

Crown Block -
Crown block complete set : Design and conform to APİ 4F specification
Max. hook load : 1.568kN (352.000lbs)
Number of sheaves :
(3) Main + (1) fast line + (1) deadline + (1) sandline + (2) sheaves for service winch

Sheaves OD :
Fast Lines Ø36" ( Ø915mm )
Dead Line Ø32" ( Ø813mm )
Sand Line Ø32" ( Ø813mm )

Dia. of sheave’s grove :
Fast & Dead Lines Ø1⅛ " ( Ø29mm )
Sand & Winch Lines Ø 5/8" ( Ø16mm )

Substructure
Substructure complete set : Design and conform to APİ 4F specification
Height of substructure substructure : 5.5m
Area of substructure : 40m2
Max. static rotary load : 1.600kN
Set back capacity : 800kN
BOP lifting tools : 3 tons capacity electric or mechanic winches
Accessories : Mouse, rat hole, dog house

Rotary Table
Diameter of opening : 27½"
Center of table to centerline of sprocket teeth : 53¼"
Maximum static load, ton : 500
Max speed, rpm : 300
Gear ratio : 3.67
Dimensions (LxWxH), in : 94×66×27
Approximate weight, lbs : 13,500

Traveling Block & Hook
Traveling block :
1.600kN max. statik load, 4 sheaves, Ø36’’
sheaves dia. Ø1⅛’’ (Ø29mm ) groove dia.

Hook : 1.600kN max. statik load, 5tons spring stroke.
Elevator link(s) : 1.600kN rated load capacity.

Swivel
Static hook load, ton : 160
Working pressure, psi : 5,000
Maximum speed, rpm : 300
Coupling thread to stem : 6-5/8" Reg LH
Coupling thread to kelly : 6-5/8" Reg LH
Stem İ.D. : 3"

Trailer & Other Systems
Trailer :
Three axles semi mobile trailer, 12 wheels, fabricated high
tensile steel vehicle frame reinforced at points of greatest
stress. Highway equipment and cab included. Installed fuel tank.
Tool box. Auxilary drill line drum, all axles dressed brake, folding
walkwayss on both sides of trailer.

Hydraulic jacks : Six hydraulic operated leveling jacks
Hydraulic service winch : 5 metric tons drum pull capacity
Deadline anchor : Deadline anchor attached directly to trailer frame

Hydraulic system :
Hydraulic pump, system operate hydraulic cylinders on mast,
hydraulic jacks, hydraulic pipe tong, and hyraulic winch. Control
valves, hydraulic oil tank, filters, pipes, hydraulic and air valve
connections, fittings.

Air system : Compressor (engine drive), air tank, relief valves,
air dryer, gauges, all clutches

Electrical lighting system : All the electrical equipments on the mast, and
substructure are ex-proof type

Instrumentation :
Driller control panel, weight indicator, gauges, air valves, cables,
hoses, fittings, transducers, paint

Price & terms : Please enquire using the email form below. If you cannot find the
vessel, crane, rig or equipment that you need, please send us an email to
mail@worldoils.com stating your requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------
Search words(for official use only) -
New UMD 160 Drilling Rig For Sale in Europe
UMD 160 Semi Mobile Drilling Rig For Sale
New Semi Mobile Drilling Rigs
Land Drilling Rigs For Sale
Land Rig Builders in Europe Land Rigs in Turkey
Drilling Rig Builders in Turkey
Rig Builders in Europe
New Land Drilling Rig
-------------------------------------------------------------------------

UMD 160 New Land Drilling Rig - For Sale in Europe

ID 596

Worldoils Marketplace

Worldrigs ID: WR482

Service Rig for Sale
Carrier Service Rig for Sale
New Service Rig - 600hp

Description :
This service rig masts are designed and manufactured to all API 4F
protocols. Engineer’s certification and inspection plaque supplied.

Specifications :
Main Style :
• Telescoping Double, Triple Rod, Mast.
• Clear working height 107’ 3”

Static Hook Load :
250,000 lbs with 8 lines strung

PSL / SSL Level :
As per API, Product Specification Level and Safety Specification Level
must be determined between the manufacturer and the customer.

Drilling Line Size :
Drilling line size : 1 1/8” wire rope ( line to be supplied by customer
unless otherwise specified in writing)

Crown Assembly :
Walk around crown

Crown Sheaves :
• 24” x 1 1/8” working sheaves with bearings : Qty - 3
• 36” x 1 1/8” fast-line sheave with bearings : Qty - 1
• 24” x 1 1/8” deadline sheave with bearings : Qty - 1
• 24” x 9/16” sandline sheave with bearings : Qty - 1
• 8” winch line sheaves

Racking Board :
• 8” racking board raising sheaves
• Fingers adjustable for tubing sizes 2 3/8” – 4 ½”
• Board raises and lowers automatically with lines in tension at all times.
• Mounts at 55 feet above ground level.
• Capacity 2 7/8” x 16 600 feet

Rod Board :
• Rod transfer cylinder, foot pedal, and cable with anchor for egress line
77’ 8” off ground.
• Fingers spaced for rods. 3/4” – 1”
• Capacity of 14 600’ of ¾” rods or 11 200’ of 1” rods

Mast Raising and Scoping :
• (1) 2- stage hydraulic scoping cylinder
• (2) 3-stage hydraulic mast raising cylinders

Mast Cables :
• 1/2” board raising lines : Qty - 2
• 5/8” rod board lines : Qty - 2
• Rod transfer line, ¼” : Qty - 1
• Work floor lines, 5/8”with 1/2” chain ends : Qty - 2
• Escape line, ½” (one from racking board, one from crown) : Qty - 2
• Free-standing lines to wings, 5/8” : Qty - 2
• 7/8” load lines : Qty - 4

Standpipe :
• 2” x 5000 PSI WP standpipe clamped and mounted off-drillers side.
• Includes gooseneck and one hammer union.

Safety and Fall Protection :
• Walk around crown w/safety handrails
• Non slip flooring, kick plates and handrails on work platform
• 5000# fall arrest mount at crown
• Escape line for use off racking board

Ladders :
One ladder to crown on the off-driller’s side, servicing rod and racking boards

Dimensions :
• Length collapsed on carrier : 60’5”
• Footprint at base : 69.5” x 41.5”

Make-up / Break-out System :
Not included in base package; option can be quoted upon request.

Additional Features :
• 5000 lb. winch mounted on mast, includes sheaves at crown, swivels, tail
chains, and shackles.
• Two flagpoles
• Weight indicator mount

Standard Lighting Package :
• Standard lighting package is 60Hz (50 Hz – optional) and explosion-vapor proof as
per ASA codes. Electrical encased in conduit.
• 2’ Fluorescent light fixtures with safety chain : Qty - 11
• Quartz lights, 500 watt : Qty - 3
• Crown flood light : Qty - 1
• Red crown light : Qty - 1
• White strobe : Qty - 1
• Marker lights, 12V, on crown for roading of rig : Qty - 1

Work Platform :
• Adjustable folding type work floor 12’ x 8’
• Max 12’ off ground clearance

Mast Support Base : A - legs

Mast Support Rest : To tie down the mast for roading

Custom Features Options (not included in quoted price) :
• API Monogram may be provided upon customer request
• Weight indicator
• Drill line
• Sheave size may be customized upon customer request

The standard 600 Series Service Rig is built upon a back-in style carrier, conforming to
Transport Canada requirements, and is stamped with the National Safety Mark and world
identification serial numbers. Tandem front steering axles and tridem drive axles are
configured for year-round access to difficult to reach sites. The manufacturer manufactures
these units for customers around the world and routinely will customize construction to
conform to standards applicable in the destination country.
The carrier’s durability and reliability is assured by the manufacturer's structural wide flange
steel frame, fabricated with welded cross members.

Engine :
Detroit series 60 diesel engine (475 HP) with radiator, alternator, starter, air cleaner,
TuFlo 750 air compressor (28 CFM), power steering pump, emergency kill fuel shut off, air
intake, ESD system, all gauging and filters, 12V electric starting system.

Transmission :
4700 OFS series Allison automatic transmission for traveling & manual shift for drawworks
with filter group, gauge package, flanges and shifter. Drop box attached to transmission to
include drives for (3) rear drive axles and drawworks.

Frame :
18” x 41 lb structural wide flange beam frame rails, fabricated with welded cross members.
Width 102” height 14’ with mast.

Front Axles :
18” x 41 lb structural wide flange beam frame rails, fabricated with welded cross members.
Width 102” height 14’ with mast.

Rear Axles :
Tridem 23,000 lb rear Axles (12)-12R x 22.5 X 14 ply with polished aluminum rims. All rear
axles include emergency and parking brake system and ABS brake system.

Carrier Dimensions -
Length : 44’ / 13.41m
Width : 102” / 2.59m
Height (with mast) : 173” / 4.39m
Overall Length, including mast : 64’ / 19.5 m
Front Overhang: (from ctr of front tandem axle) : 24’ / 7.3 m
GVW : 119 000 lbs.
GVNR : 106 000 lbs

Cab :
One man cab with hydraulic steering system and false front. Cab equipped with adjustable
bucket seat, safety belt, wiper, roll-up window, CD stereo-radio, air horn, standard instrument
& control panel package includes speedometer (KM’s), tachometer, engine oil pressure, engine
water temperature, transmission oil pressure and oil temperature, voltmeter, air pressure gauge,
warning lights, flasher switch, high – low beam switch, gear selector, fuel gauge.
Controls include : engine start switches, differential lock-up, gear selector, ESD, safety back-up
alarm.

Electrical :
12V electrical system equipped with Canadian DOT approval headlights, brake lights, turn
signals, clearance lights and cab-control lighting.

Driller's Station :
Raised drillers station, Control panel includes pressure gauges, valve spool controlling,
(1) aux winches, , drum clutches, throttle valve, ESD, accumulator controls, horn, slips air valves
& regs. Engine emergency shutdown device.

Pump :
37 gallon/minute depending on engine RPM.

Hydraulic System :
Hydraulic system operates leveling jacks, utility winches, power tongs, raising ram,
scooping ram, 250 gallon hydraulic tank includes dual suction filters and 12V cooler. Hydraulic
pump operated directly from transmission mounted PTO with pressure relief safety valve system.

Safety :
• Engine cover for security, drive shaft covers.
• Cowl exhaust system and spark arrestor.
• Battery box with 2 – 12V – 8 D batteries (rubber lined)

Additional Features :
• 150 gallon aluminum diesel fuel tank
• Engine-driven 28 CFM compressor air system, desiccant air dryer system, filters.
• 60 gallon air tank with pressure relief safety valve and water drain valve.
• Winches, hydraulic, carrier-mounted. Includes sheaves on crown with 9/16”
cable, swivels, tail chains and shackles. (1) 8000lb, (1) 5000 lb.

• 44 gal Accumulator mounted on rig; manufacturer's design (Class III), c/w (3) – 4 way valves,
remote control panel at the drillers station.
• Manufacturer manufactured A-legs
• Manufacturer's crown block saver
• Walkways, hydraulically actuated, 24” wide, with non-slip flooring, safety handrails, stairs and
kick plates on both sides of carrier.

• Stairs with safety hand rails to walkway. Max of 12’ off ground clearance.
• Hinged stairs on both sides of engine house
• Drill line spool rack mounted on carrier.
• Dead line anchor (drum type) mounted on carrier frame. (Certified)
• Four load line anchors with turnbuckles. (From crown to carrier, & mid-mast to carrier)

• Mast support rest, to tie down the mast for roading.
• Equipment basket mounted under carrier.
• Weight indicator mount c/w Martin Decker Weight Indicator.

• Two piece, split load beam mounts to rear leveling jacks.
• Hydraulic actuated leveling jacks, 6 in total. 2 each at rear bumper, behind rear steering axles,
and under drawworks frame support.
• Front and rear bumpers and tow hooks. Levels installed on front and rear bumpers.
• Air ride chassis

Optional Items :
• Power tubing tong carrier on carrier.

Custom Features :
• This rig includes a safety-enhancing remote rig-up system, allowing mast raising, fixturing of
both operator pads, and all jacks, to be done from off – carrier via a supplied remote control.
• Walkways, hydraulically actuated, 24” wide, with non-slip flooring, safety handrails, stairs and
kick plates on both sides of carrier.
• Adjustable (folding) working floor on off-driller side. 4 ft wide x 6 ft long, with safety handrails,
kick plates and non-slip flooring with aluminum folding.

Drawworks, 600HP :
This 600hp drawworks has a 41,000lb. single line pull.

Pull : Single Lin e: 41,000 lbs.
Power : Driven by a mechanical engine of suitable power for the application
Controls : Control panel include, ESD, throttle, clutches air valves, air gauge.
Drive / Gears :
- Chain drive
- Right angle transfer gear box

Cooling : Oil bath lubrication
Lubrication : Oil bath lubrication
Drill Line & Spool : The manufacturer can supply line and spool for main and sandline drums;
not included with quoted price unless expressly specified.

Additional Features :
Air actuated drum (outboard) clutches
Removable metal safety shield guards (only for maintenance & inspections).
Main drum & sand line brake lever with tie down chain

Custom Features
Description : Drum Size
Main Drum : 42” x 10”
Sandline Drum : 38” x 13”

Description : Line Size
Main Drum : 1 1/8” with Lebus grooving
Sandline Drum : 9/16” or ½”

Description : Line Amount
Main Drum : 700’ commonly used (*see note)
Sandline Drum : 10,000’ commonly used (*see note)

Description : Drum Clutch
Main Drum : 32 ‘ air flex clutch
Sandline Drum : 22” air flex clutch

Description : Brake
Main Drum : 42” x 10” brake bands
Sandline Drum : 38” x 8” brake bands

Description : Auxiliary Brake
Main Drum : Kobelt disc brake

Travelling Block, 150 Ton
(Optional item - not included in quoted price)

Features :
• Maximum working load 150 ton
• 4 x 24” x 1 1/8” sheaves
• End plates, shafts, pedestals included in each assembly
• Manufactured and certified to API 8C

Optional Featues :
Sheave size may be customer-specified at time of order if mast sheaves are different from 24”.

Paint, Tropical Conditions :
The manufacturer utilizes a coating system that reflects expected environmental conditions and
durability requirements of your project. Different coatings exist to hold up against harsh climates
and moisture, chemicals, impact and scratch resistance, and intense UV exposure. The coating
system below is specifically intended for conditions similar to tropical climates. The equipment
would have extended exposure to high humidity, heat and salt (but not submerged in water).

Building and Equipment -
Sandblast :
All sandblasted steel substrates cleaned of all mil scal and surface impediments

Prime Coat-Zinc Rich Primer :
- Brush in difficult to reach areas prior to spray application
- 1 coat
- Dry film thickness 2-3 mils

Mid Coat – Mastic Primer :
- Brush in difficult to reach areas prior to spray application
- Seal all voids and seams on outside of building panels only, using compatible urethane caulking
- 1 coat; dry film thickness 2-3 mils

Top Coat- HS Urethane :
- 2 coats
- Dry film thickness 2-3 mils

Walking Surfaces -
Sandblast : As above
Prime Coat : As above
Non slip coating : Dry film thickness varies upon application requirements

Non Potable Water Tank Interior Coating -
Sandblast : As above
Prime Coat-Commercial Grade Primer : As above
Optional Liner Coating :
- Brush in any difficult to reach areas and pockets prior to spray application
- Stripe coat
- Sides 8 mils – 1 coat
- Bottom 14 mils – 1 coat
- Specifics followed as per coating data sheet

Fuel and Mud Tank Interior Coating -
Sandblast : May be done for additional cost.
Prime Coat-Commercial Grade Primer : May be done for additional cost.
Optional Liner Coating : May be done for additional cost.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

--------------------------------------------------------------------
Search words (for official use only) -
Service Rig for Sale
New Carrier Service Rig for Sale
Service Rig - 600hp
Carrier Service Rig for Sale
New Service Rig - 600hp
---------------------------------------------------------------------

Service Rig - 600hp - for Sale

ID 482

Land Drilling Rig for Hire

ID 572

Ingersoll-Rand RD20 Range II Rotary Drill Rig for Sale

Worldoils Marketplace

Worldrigs ID: WR824

Ingersoll-Rand RD20 Range II Rotary Drill Rig for Sale
2000 Built Ingersoll-Rand RD20 Range II Rotary Drill Rig

Manufacturer : Ingersoll-Rand
Model Year : 2000
Model No : RD20 II Drill Rig
Condition : Used

Description

2000 Ingersoll-Rand RD20 Range II Rotary Drill Rig
IR 1050 cfm / 350 psi Air Compressor
Cummins 700 HP Diesel Deck Engine
Spur Gear Power Head with 2 double motors
110,000 lbs of Pullback
Floating Sub Adapter
3 hydraulic leveling jacks
Carousel
Mounted on a CCC (Crane Carrier Company) Truck
Cummins M11 Diesel Engine @ 450 HP
13 Speed Transmission

Cost Extra or Included as a Package:
1985 Joy Booster WB12 Air Booster 2 Stage - S/N: 12585
SOC 2400 B
Detroit 12V71 Diesel Engine
Skid Mounted

Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Ingersoll-Rand RD20 Range II Rotary Drill Rig for Sale
2000 Built Ingersoll-Rand RD20 Range II Rotary Drill Rig
Ingersoll-Rand Used Drilling Rig for Sale in USA
Ingersoll-Rand Drilling Rig 2000 built for Sale
Used Ingersoll-Rand RD20 Range II Rotary Drill Rig for Sale
---------------------------------------------------------------------------------------------------------

Ingersoll-Rand RD20 Range II Rotary Drill Rig for Sale

ID 824

Ingersoll-Rand T3W Drilling Rig For Sale

Worldoils Marketplace

Worldrigs ID: WR741

Ingersoll-Rand T3W Drilling Rig For Sale
2002 Built Ingersoll-Rand T3W Drilling Rig For Sale

Model : T3W Drill Rig
Manufacturer : Ingersoll-Rand
Year : 2002
Condition : Used

Description :

2002 Ingersoll-Rand T3w Drill Rig - S/N: 6707
IR HR2 900 cfm / 350 psi Air Compressor (Rebuilt in 2013 with 200 Hours
Since Rebuild)
CAT 3406 Diesel Deck Engine - Rated 475 Horsepower with 11,800 Original
Hours (New Head Installed in 2011)
7-Rod Carousel For (4-1/2” X 20’) Drill Pipe
4 Newer Hydraulic Motors On Top Head (All Bearings Replaced in Top
Head in 2010)
6-gal. Hammer Oiler
18 GPM Bean Water Injection Pump
Single Rod Loader
Torque Limit Control
18,000 LBS. Main Hoist
2,000 LBS. Utility Hoist
6” Hammer Pocket
4-Leveling Jacks
300' Feet of Drill Pipe Included
Mounted On AN 2002 International Model 2674 Truck W/A CAT C12, 340
Horepower Engine
52,000 Miles On Truck
VIN. #1HTGLAXT22H515312
Regular Maintenance Done Every 200 Hrs.

Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------------
Search words (for official use only) -
Ingersoll-Rand T3W Drilling Rig For Sale
Used Ingersoll-Rand T3W Drilling Rig for Sale
Ingersoll-Rand T3W Drilling Rig - 2002 Built for Sale
2002 Built Ingersoll-Rand T3W Drilling Rig For Sale
Ingersoll-Rand T3W Drilling Rig For Sale in USA
-------------------------------------------------------------------------------------------------

Ingersoll-Rand T3W Drilling Rig For Sale

ID 741

Worldoils Marketplace

Worldrigs ID: WR1437

Schramm T685DHH Drill Rig for Sale
1986 Built Schramm T685DHH Drilling Rig

Model : T685DHH Drill Rig
Manufacturer : Schramm
Condition : Used
Year : 1986

Description :

1986 Schramm T685DHH Drill Rig
Cummins KT19C diesel deck engine - rated 550 HP
Rebuilt GHH 850 cfm / 350 psi air compressor
Operator Cab
Hydraulic Table Wrench
12,000 Winch
24" Table Opening
Side Drill Rod Rack
Helpers Platform
70,000 lbs Pullback
12 GPM CAT Water Pump
Oil Pump
Mounted on a 1986 GMC truck (Tri-Axle)
Detroit 671T diesel engine - rated 300 HP
13 Speed Transmission (estimated 40,000 miles)

Location : Africa

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

--------------------------------------------------------------------------------------------------------------------
Search words(for official use only) -
Schramm T685DHH Drill Rig for Sale
1986 Built Schramm T685DHH Drilling Rig
Schramm T685DHH Drilling Rig for Sale in USA
Used Schramm T685DHH Drilling Rig for Sale
Drilling Rig 1986 Built- For Sale
---------------------------------------------------------------------------------------------------------------------

Schramm T685DHH Drill Rig for Sale

ID 1437

Worldoils Marketplace

Worldrigs ID: WR357

Driltech D40K Drill Rig for sale
1991 Built Driltech D40K Drill Rig for sale

Model : D40K Drill Rig DH (Deep Hole)
Manufacturer : Driltech
Year : 1991
Condition : Used

Description :

1991 Driltech D40K Drill Rig
DH (Deep Hole) at 60,000 lbs of pullback from factory
72,000 In.-Lb. Torque @ 0 - 100 RPM
CAT 3408B Diesel Deck engine - (reman with only 1,600 hours)
1000 cfm / 350 psi Air Compressor
720' ft of (25' x 4-1/2") Drill pipe
FMC/Bean 35 gpm pump
Hammer Lubricator
Control Valves Rebuilt
No carousel
Mounted on a International Truck
Cummins NTC 350 Diesel Engine
25,200 + miles

Location : USA

Price & terms : Please enquire using the email form below

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------------------------------------------------
Search words(for official use only) -
Driltech D40K Drill Rig for Sale in USA
Used Drilling Rig - 1991 Built Driltech D40K
1991 Built Driltech D40K Drilling Rig for sale in USA
Drilling Rig - Driltech D40K - For Sale
Driltech Land Drilling Rig - 1991 Built - for Sale
--------------------------------------------------------------------------------------------------------------

Driltech D40K Drill Rig for Sale

ID 357

Gardner Denver 2000 Drilling Rig for Sale

Worldoils Marketplace

Worldrigs ID: WR1030

Gardner Denver 2000 Drilling Rig for Sale
Gardner Denver Drilling Rig - 1978 Built for Sale

Model : 2000 Drill Rig
Manufacturer : Gardner Denver
Year : 1978
Condition : Used

Description :

1978 Gardner Denver 2000 Drill Rig
Trailer Mounted
2 – Detroit 471 turbo diesel deck engine (comes with spare)
Triple drum draw works
57' ft. tubular mast - rated at 100k
100k pullback draw works
18” Howard Turner rotary table
4-½" x 35’ long Kelly bar
Garner Denver 7x10 duplex mud pump
Cathead
Water break
6 line block
5/8" cable on draw works (Kelly and blocks)
1-hydraulic breakout tong (1 backup)
Spinning chain
4-hydraulic leveling jacks
Rack boards set up for 4-1/2” pipe and 8” collars – single height
Air clutches
200 gallon fuel tank
2 cylinder john bean soap injection pump
3” mud piping
2” air piping
Lay down catwalks with handrails

Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
1978 Built Gardner Denver 2000 Drilling Rig for Sale
Land Drilling Rig - Gardner Denver 2000 - for Sale
Gardner Denver 2000 Trailer Mounted Drilling Rig
Used Land Drilling Rig for Sale in USA

Gardner Denver 2000 Used Drilling Rig for Sale

-------------------------------------------------------------------------------------------------------

Gardner Denver 2000 Drilling Rig for Sale

ID 1030

Worldoils Marketplace

Worldrigs ID: WR244

Ideco Mechanical Drilling Rig for Sale
Gas & Oil Drilling Rig
Ideco U-15 - 800 HP Used Mechanical Drilling Rig
Used Oil 800hp Drilling Rig

Rig Carrier
Drawworks

800 HP U-15 single drum, Make up & Breakout heads hydromatic brake

Hydraulic Winch

5,000 lbs capacity Air operated

Drawworks Power

(2) Cat 3406 engines, 599 HP, 2 twin disk torque converters

Mast

107’ not certified on lbs, 8 lines. Is adequate height to allow mouse hole connection

Substructure for BOPE Class – III

100,000 lbs, not yet certified, Capable of handling 8’ tall BOP, Complete with V door, catwalk and handrails. Not adjustable rotary table, No T structure. Substructure design must be able to accommodate opening of pipe ram doors whenever ram size change-out is required.

Rotating Equipment

Rotary Table

Cooper 17 ½” diameter opening, 100 ton dead load capacity, Complete with torque guage. Mechanicl driver system with diameter bushing for 7” to 13 5/8” tubular. Rotary table with lock to prevent clockwise and counter clockwise rotation.

Rotary Hose

Minimum 3” ID with 55’ length, with minimum 3000 psi WP complete with union connection with safet6y chain

Rotary Swivel

L200 Emsco, 150 ton capacity

Kelly

4 ½” square type with bushing saver-sup, 40’ min working space and maximum height must be matched with mast specification and accessory equipment and able to take mouse hole connection.

Sluch Pump

(1) 18” C350 National , matco fluid – end ID #C350-002, powered by 3412 caterpillar

(1) 16” N1100 Duplex, Matco Fluid-end Serial # X1177, powered by 379 caterpillar serial # 76B270

Sluch Pump Prime Mover

(1) 18” C350 National, Matco Fluid-end, ID#C350-002, powered by 3412 Caterpillar

(1) 16” N1100 Duplex, Matco Fluid end Serial # X1177, powered by 379 Caterpillar serial # 76B270

Shale Shaker with Jet Sprayer

(1) 4 x 4 vibrating shake (electric)

Hoisting Equipment

Drilling Line

New 1” line size, 6 x 19 IPS, FC – 5000 ft. and match to the drawwork and crown block. C/W drilling line spool and tone mile record

Hydraulic winch line

With minimum 5/8” line size, 200 feet length and 5 ton capacity

Traveling Block with Hook

6 sheaves 1” drilling line completed with standard and extra long links and match to drum and mast, with minimum 150 tons capacity

Elevator Link

(2) 3” x 8’ with 150 ton capacity

Elevator (tubing, DP, and DC)

4” rebuilt and certified #w04166701LT10-1008, 150 ton capacity

Weight Indicator

Totco, capacity measurement 0-360,000 lbs having weight and vernier pointer, match with rig capacity. Recalibrated as required by Red Satelite

Depthometer

Eastman ¼” line measuring 300 ft

Tubular Good and Equipment

Manual Rotary Tong

BJ type C each of make-up and breakout manual rotary tongs for 3 ½” to 10 ¼” tubular size with 35,000 ft lbs of torque. Must be complete with tong line (torque) pull gauges installed on each the make-up and breakout snub lines. Total 1 toneg line pull gauges.

Chain Tong

One 30” to handle 2 3/8 – 6”, and One 36” to handle 2 3/8 – 12”

Rotary Slip

One set of 4” slips and one set of 6” drill collar slips

Safety Clamp

One 6” drill collars

Pipe Rack

Three – 3-leg conventional pipe rack complete with stopper on each and for 50 joints DP and tubing, and for 15 joints of + 5/8” liner with wooden base

Subs

One 4 ½” xh – 4” fh

One 4 ½” xh – 6 ¾ regular

One 4” fh – 4 ½” xh

One 4 ½” regular – 4” fh

One 4 ½” xh – 4” fh

BOPE

Ram BOPE

One 8” Regan type bladder BOP

Closing Unit

One Accumulator system with 3000 psi WP, complete with air compressor with automatic start

Electrical Equipement

Electric Power

Generator house with 2300 kw generators and emergency electric air compressor

Lighting

One set explosion proof lighting set with sufficient lighting for rig site, ground fault interrupter with power head cable 220-480 V.

Miscellaneous

Doghouses (top and bottom)

One Top doghouse ID# 104, 40’ x 8’ x 7 ½’

One Bottom doghouse ID # 122, 29’ x 8’ x 7 ½’

7000 ft of 4” full hole

Drill Collars

Sixteen 6 ½ OD

Hutson Fork Lift

Mechanical Drilling Rig - Ideco U15 - 800 HP - for sale

ID 244

Worldoils Marketplace

Worldrigs ID: WR455

Reichdrill Legend 4 Drilling Rig for Sale
2009 Built Reichdrill Legend 4 Drilling Rig for Sale

Description :

Year : 2009 Reichdrill
Model : Legend 4
Compressor : Sullair 1000/350
Engine : CAT C15
Mud Pump : None
Mounted On : 2009 Kenworth
Tr Engine : Cummins ISX
Condition : Near New

Tools/Options :

Deck Engine has the California Emission Control System - Certified Clean
Idle 40,000# Pullback, 27,000# Pulldown, 18" Table Opening, 9-Rod Carousel
& 18-Rod Pipe Rack, 1,000 psi Bean Piston Water Pump, Hammer Oiler,
Wireless Remote, Rapid Retract & Regen System. Rig is Capable of
Carrying 540' of Drill Rod on Board, 6" & 8" Hammer Holders,
Remote Station for Jib Boom.

Rig is set up to run 4" X 20' Drill Rod. (4) Leveling Jacks and (2) Fuel Tanks
with a Total Capacity of 185 Gallons, (4) Shock Mounted Night Lights.
2,306 Rig Hours. 485 HP Truck Engine with approx. 19,000 Miles,
4-Way Lock Ups, Engine Block Heater, Eaton Fuller 8 LL Transmission,
Engine Brake, 3rd Steering Axle, A/C. 20,000# Front Axle with
Bridgestone 425 65R22.5 Tires, 20,000# Lift Axle with Kumho 385
65R22.5 Tires, 46,000# Rears with Bridgestone 11R22.5 Tires. 56 Gallon
Fuel Tank. Includes: 540' of 4" X 20' X 2-7/8" Drill Rod, Table Bushings,
Petol Wrench, Bit Basket, J-Wrench, Lift Sling, Lifting Bail, Gas Powered
Welder/Generator.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

------------------------------------------------------------------------------------------------
Search words(for official use only) :
Reichdrill Legend 4 Drilling Rig for Sale
2009 Built Reichdrill Drilling Rig for Sale
Used Drilling Rig - Reichdrill
Legend 4 Land Drilling Rig for Sale
------------------------------------------------------------------------------------------

Reichdrill Legend 4 Drilling Rig for Sale

ID 455

Worldoils Marketplace

Worldrigs ID: WR656

CME 550 Auger Drilling Rig For Sale
1980 Built CME Drilling Rig For Sale

Model : 550 Auger Drill
Manufacturer : CME Drill
Year : 1980
Condition : Used

Description :

1980 CME 550 drill rig
New Ford 300 Ford industrial gas engine (sine 6/2010 and about 400 hours)
New CME factory rotary box, bearings, and a complete clutch system
(sine 6/2010 and about 400 hours)
30' ft of auger tooling on it (augers, AWJ rods, drill bits, spoons, etc.) included
2 rear leveling jacks, 1 front leveling jack,
cathead winch, tool winch, front winch,
driver saftey cab,
L8 pump
front auger rack, side auger racks, rod rack, side deck tool box, enclosed tool compartment,
in-out slide base, auger swivel, etc...
Mounted on a Buggy Unit
6 Heavy Duty Mud Tires (2 front & 4 rear tires)

Note: Rig is in very good working condition and is currently in operation for
inspection by appointment.

Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
---------------------------------------------------------------------------------------
Search words (for official use only) -
CME 550 Auger Drilling Rig For Sale in USA
550 Auger Drilling Rig - CME For Sale
Used 550 Auger Drilling Rig For Sale
CME Drilling Rig For Sale in USA
CME 550 Auger Drilling Rig 1980 Built For Sale
----------------------------------------------------------------------------------------

CME 550 Auger Drilling Rig For Sale

ID 656

SK 775 Carrier Mounted Drilling Rig for Sale

Worldoils Marketplace

Worldrigs ID: WR2507

SK 775 Carrier Mounted Drilling Rig for Sale
750 HP Carrier Mounted Drilling Rig

Description:

Carrier Drilling Unit :

2010 Service King-SK 775 Series
Serial Number 1S972DD8XAL976150

Single drum with Lebus grooved drum for 11/8"drilling line with 42" X 12"
band brakes with circulating drum and kobalt 48"X 8" double disc assist

Powered by 2 Detroit Diesel 60 Series engines 540 HP each with 2-45000 FS
Allison transmissions with Cotta 1500 HP splitter box and Service King
1500 HP right angle box

Mast :

Service King 112',400,000SHL 4 leg telescoping mast Hydraulically raised
and scoped 5 sheave crown block,hydraulic cat works, automatic racking
board, air and hydraulic control consoles, safety lights.

Carrier :

All of the above mounted on a 2010 Service King 775,6 axle back in carrier
with single man cab,air shift,4 hydraulic leveling jacks with locks,Can
Global 250 ton quick release deadline anchor, mechanical rotary drive
(shaft drive),2 hydraulic 10,000 Ib. utility hoist,side walkways,steps
and safety rails. The six front tires are 425/65R22.5 wide base tires
mounted on 12"X 22.5 steel hub piloted bud type wheels.The 12 rear tires
are 11R22.5 all-terrain tires mounted on 8.25 X 22.5 hub pilotedbud type
steel wheels.

Substructure :

Service King 8'-22' high hydraulically raised with 14'X16'floor with 2'X16'
wing with 6'X30'base beam. 12'high with 400,000Ib.set back with safety energy
efficient LED lights, with 27½" National rotary table 12'H X 45'L X 12'W - 1
piece back on ramp

Dog House :

10'W X 40'L with benches, 12 Lockers,tool and bolt room,knowledge box,satellite
auto driller,Martin Decker 3 pin geolograph recorder 2-220 Volt electrical
heaters, insulated, safety florescent lights,windows,covered porch with stairs
and landing safety rails. Hydraulically raised/lowered unit.Oilfield skidded.

Water Tank :

9'H X 10'W X 42"L (500 barrel) with 8'X10'storage room with water pump,220
volt electric heater, has 4 hydraulic cylinders with control valve to raise
and lower the dog house above it,safety florescent lights

Catwalk/Pipe Tubes :

42'X 3'X 8'cat walk with Vee Door ramp stairs 1 sets 36"X 30' triangle pipe
racks Brewster 6 sx swivel with 40' Hex Kelly with roller bushings 200 ton
block and hook

Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------------
Search words (for official use only) :
SK 775 Drilling Rig for Sale
750 HP Carrier Mounted Drilling Rig for Sale in USA
2010 Built Service King 775 Carrier Mounted Drilling Rig
Service King 775 Carrier Mounted Drilling Rig - 750 HP for Sale

Carrier Mounted Drilling Rig for Sale in USA

---------------------------------------------------------------------------------------------------------------

Service King 775 Carrier Mounted Drilling Rig For Sale

ID 2507

Used 2000hp Land Rig For Sale - National 1320 for sale

Worldoils Marketplace

Worldrigs ID: WR628

Land Drilling Rig For Sale
Used National 1320 Drilling Rig for sale
National 1320 - 20,000 Capacity with 5" Drill Pipe

Description :

Draw-works:
National 1320 UE powered by (2) GE 752 traction motors
Type B1 Catheads
Elmagco brake SN #9352
B. Substructure & Mast:
Mast : Inland Steel USA 28B455
Lee C Moore cantelever 1,000,000# hook load 157'
Enclosed box substructure 31.75' setback

C. Motor package:
1 - 3406 Caterpillar (cold start)
4 - 399 Caterpillar engines
4 - Synchronos AC generators (600 volt)
2 - Quincey QSI-245 air compressors - 60 hp electric motors

D. SCR:
Baylor Thyrig system
Top drive scr

E. Mud pumps:
2 - National 12P-160 mud pumps - 2 each GE 752
electric motors pump #2 sn #1272

F. Rotating & traveling equipment:
National - Oilwell C-375 rotary table
Block : National 500 ton
Swivel : Cont. Emsco L8-400
Kelly : 5 1/4" Hex Kelly 45'

G. Blowout prevention:
Annular Hydril 13 5/8 5,000 psi
D Rams QOP 13 5/8 10,000 psi
S Ram QOP 13 5/8 10,000 psi
Koomey Type 80 20 bottle precharge system (3,000 psi)
house is on off drillers side of floor.
Remotes - driller console, ground unit remote
3"x4" choke manifold system with gauges and manual chokes.9 valves total.

H. Handling tools / Auxiliary equipment:
Varco HP-41 hyd. unit (runs)(1)TW-60 iron roughneck (1) 400H pipe spinners
Wildcat ADS-1 automatic driller
Martin Decker type E weight indicator (1) martin decker E-Totco reader survey tool

I. Doghouse, water, fuel, & mud tanks:
3 mud tank system (1115 bbls)
3 Derrick Flo-line mud cleaners W/(1) 2 cone desander and
(1) 16 cone desilter(1) vacu-flo 1200 degasser
2 8X6X11 100 hp centrifigal pumps for desander and desilter
2 8X6X14 100 hp centrifigal pumps for degasser 2 6X5X14 50 hp charger pumps
2 2X3X13 15 hp centrifigal pumps for trip tank
2 halco low pressure mixing hoppers (9) adjataters on mud tanks
2 water tanks (500 bbls each)(1) fuel tank-20,000 gal(1) heated top and bottom doghouse
Two story parts house
fire box storage - for flammables

J. Drill pipe & drill collars:
Drill pipe : 603 Jts 19.60 S-135 4 1/2IF 19,000 ft
HWDP : 38Jts 49.30 spiral 4 1/2 IF 1170 ft
6 1/2" DC : 12 Jts 91.53 spiral 4 1/2XH 375 ft
8" DC : 10 Jts 150.48 spiral 6 5/8REG 310 ft

K. Top Drive:
Rebuilt 500 ton National top drive PS-149-H

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------------
Search words (for official use only) -
Land Drilling Rig For Sale
2000 HP Land Drilling Rig
2000HP Used Drilling Rig For Sale in USA
Used Land Rigs for Sale
2000hp Used Land Rig for sale
National 1320 Used Drilling Rig
Used National 1320 - 2000hp Rig For Sale
----------------------------------------------------------------------------------------------------------------

National 1320 Used Land Rig - 2000hp - for sale

ID 628

Worldoils Marketplace

Worldrigs ID: WR749

Mechanical Land Rig For Sale
American Used 1500hp Land Rig
1500HP Land Rig for Sale in USA
Mesa Model 1500 Mechanical Drilling Rig

Drawworks :
Mesa, Model 1500 Hp, M, Split Level with Catworks, Brake Parkersburg, Model RC60 Hydromatic with Overriding Type “A” National Clutch with Gardner Denver Inline Compound for 3 Engines And with 1) Air Compressor Complete Package, Rebuilt By Spartan Equipment, June 2006

(3) Power Units :
Caterpillar Model C-18, Diesel Engines, 630hp Ea Complete, And with radiators, approx 1200 Hrs On Each Engine Since New, Skid Mounted.

(3) Torque Converters :
Oilworks, Model 195-100, Odessa, Used Approx 1200 Hrs Since New

Mast :
Lee C Moore, 142’, 1,385,000 Lbs, SHL Capacity, Angle Leg with Crown Block 1-3/8” 6 Sheave And with (1) Fastline Sheave, with Derrick Boom, Racking Finger Board

Substructure :
Elevating Type, 22’ High, 1,000,000 SHL Capacity, 750,000 Set Back, with National Deadline Anchor And Sensator, Type “E-B” with Derrick Raising Becket And Derrick Stand

Mud Pumps :
Two (2) Lewco, 1300 Hp Complete with Matco Pulsation Dampener with Charging 5” X 6” Centrifugal Pump, Matco 8000 Psi Guages, 5000# Psi Fluid Ends, with Pump Skidded, Powered By Caterpillar D399 Diesel Engine. (1) Engine Has 1360 Hrs And 1) Has 1148 Hrs Since Overhaul, Each with Radiators, Master Skidded. (Note: Pumps Were New 2006 And Has Same Hours As Power Units Above.)

Mud System :
Complete 1650 Bbl Mud System with (3) 550 Bbl Mud Tanks, with 15 Hp Mud Agitators And Mud Guns, 3) Shale Shakers, Derrick, 3 Stage, Desilter - 16 Cone, 3 Cone Derrick Desander Each P/B 5x6 Centrifugal Pump And GE 75 Hp Electric Motor with (3) 6”X8” Centrifugal Mud Mixing Pumps, Each P/B Ge 100hp Electric Motors, with Swaco Degasser, (1) 50 Bbl Slugging Tank, All Tanks Are Ultra Sound Inspected And Are Capable Of Handling Mud Weight Up To 25 Lbs Per Barrel – All Rebuilt And Finished Before May 6, 2006.

BOP :
(1) Shaffer 13-5/8” 5000 Psi, Spherical, with 5000 Psi Std Top And 10,000 Psi Flanged Bottom (1) Shaffer Sl, Double, Ram Type Flanges Top And Bottom, with (4) Flanged Outlets, with Blind And Pipe Rams (1) Shaffer Sl, Single Ram Type, Flanged Top And Bottom, 10,000# Psi with Pipe Rams. Bop’s Were Completely Refurbished By Church Energy, May 2006

Traveling Block :
National, 500 Ton, with Clevis, 6 Sheaves X 1-3/8”

Hook :
Joy, Hydra Hook with Clevis, 500 Ton

Rotary Table :
Ideco, 27-1/2” with Varco Pin Drive, Master Bushing, with Drive Sprocket

Swivel :
National, Model N-1324, 500 Ton

Kelly Drive Bushing :
5-1/4” Hex, Pin Drive

Kelly Spinner :
International With 2) Motors Forward And Reverses

Accumulator :
Koomey, Model 80, 18 Bottles, 20 Gal, with (6) Stations, with Triplex Electric Powered Pump And with (2) Air Pumps, Master Skidded, with Koomey 80 Remote Control Unit And with 100’ High Pressure 1” Lines

Choke Manifold :
New 2006, By Church Energy, 4” X 10,000 Psi with 4) 3” Valves, 1) Manual Choke, 1) Hydraulic Choke Church with Control Panel, Total Values (8) with Master Skid

Generator House :
9’w X 35’ Long X 8-1/2’ H, Crimped Metal, with 2) Cat 3412 Ta Diesel Engines, Each Powering 550 Kw Sr4 Generators, with Distribution Elect Panel, Transformers And with 2) Screw Type Air Compressors

Top Dog House :
8’w X 20’l X 10’h with Knowledge Box, Lockers, Bench Storage

Drilling Spool :
13-5/8” X 10m, with 2) 4” Flg Outlets, with Cross Valves, 10,000# Psi, 1) Hydraulic 4”, 1) Manual 4”, 2) 2” Manual And 1) Bell Valve

Auxiliary equipment :

Fresh Water Tank, 600 Barrel

2) Rotary Hoses, 3”, 1) New, Still In Box

Set Cat Walks And Pipe Racks for Rig

Complete Set Suite Cases And Walkways for Rig

Complete Set Rig Lighting And Lighting Controls

Complete Set Of Hand Tools To Operate Rig

Approx 7000’ Of Drilling Line, 1-3/8” w/ Electric Spool Rack And Metal Spool, Mtd On Master Skid

4) Air Hoist, Ingersol Rand, 8 To 12 Tons Each

Set Of Tongs, Bj Type “B” with Jaws

Pipe Spinner, Spinner Hawk

Drill Pipe Elevators, Ww 350 Ton

2) Drill Pip Slips, Varco

2) Drill Collar Slips

Mud Bucket

Tool Basket, 8’w X 18’l X 3-1/2’h with Tool Box

Lot, Extra Mud Pump Parts

Set Of 2) Elevator Links 132”, 350 Ton, Complete Set Of Fire Extinguishers for Rig Requirements

One Complete Set Of Hard Wood Matting Boards for The Rig

Mechanical Used Land Rig - 1500HP - For Sale

ID 749

Worldoils Marketplace

Schramm Rotadrill TDX 750hp for sale

ID 2291

2013 Built SCR Land Drilling Rig for Sale

Worldoils Marketplace

Fast Desert Moving Rig for sale

ID 2294

1000hp SCR MD Cowan Super Single Rig for sale

Worldoils Marketplace

MD Cowan Super Single Land Rig for Sale

ID 2293

Worldoils Marketplace

Worldrigs ID: WR1354

CME 55 Drill Rig for Sale
1978 Built CME 55 Drilling Rig

Model : CME 55 Drill Rig
Manufacturer : CME Drill
Year : 1978
Condition : Used

Description :

1978 CME 55 Drill Rig
Moyno-type Water Pump
Rotary Table
Cathead
Winch
Hammer Driver installed by CME
Ford gas deck Engine
Hydraulic operator controls
Hydraulic Leveling Jacks
Mounted on single-axle 1978 International 1600 truck
Gas engine
Manual transmission

Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

------------------------------------------------------------------------------------------------------------------
Search words (for official use only) -
CME 55 Drill Rig for Sale
1978 Built CME 55 Drilling Rig
CME 55 Used Drilling Rig
Drilling Rig CME 55 for Sale
CME 55 Drilling Rig for sale in USA
-------------------------------------------------------------------------------------------------------------------

CME 55 Drill Rig for Sale

ID 1354

Worldoils Marketplace

Worldrigs ID: WR2228

OIME TBA 2000 Heli Rig for Sale
1500hp OIME TBA 2000 Heli Rig for Sale

Description :

Section A Hoisting Equipment
A1 Drawworks :
Make and Type : O.I.M.E. TBA 2000
Rated Capacity w/size DP : 16,000' With 5" DP
Drive type : Mechanical Compound with Four each 3408
Caterpillar diesel engines

Auxiliary Brake - Make, Model, Type : Parmac Model 342A Hydromatic Brake
Minimum Input HP : 2000 HP
Drum Size and Type : 26" diameter x 48" long with 1 1/4" Lebus grooving
Catworks Catheads :
Catworks - Rotary Drive Unit, with
Foster type 24 AH spinning cathead, and Foster type 37 AH breakout cathead
Hoisting Capacity in Low/with number lines : 750,000 lbs.
Crown Block Safety Device : Super Spool Valve American
Standard PT 84105-16-16
Automatic Driller : Not available

A2 Mast :
Make and Type : Lee C. Moore
Dimensions : 136'x21'x20'
Maximum Rated Static Hook Load : 7,50,000
Hook Load Rating with number of lines : 10 lines 750,000
Adjustable Stabbing Board : Manual
Crown Block - Type : Lee C. Moore
Crown Block Sheaves Number and Size : Five each at 42" for 1 1/4"
drilling line
Crown Block Fast Line Sheave and Size : 50" for 1 1/4"
drilling line

Rating : 360 ton
Mast Racking Capacity, with 5" DP : 160 stands + BHA
Bumper Blocks under crown : Yes
Tubing Board Available : Not available

A3 Mast Substructure
Make and type : Lee C. Moore
Height under Rotary Beams : 17'
Nominal Height : 21'
Max. Set-back Load, (lbs.) : 400000 Lbs
Matting Boards : Not Available

A4 Travelling Assembly :
Block, Type and Rating : OilWell 400
Block Sheave Number, Size : Five each 42" sheaves for 1 1/4" drilling line
Hook, Type and Rating : N/A
Elevator Links, Size and Rating : 12' x 2 3/4" 350 ton

A5 Drilling Line :
Make : Union Wire Rope
Block Sheave Number, Size : Five each 42" sheaves for 1 1/4" drilling line
Hook, Type and Rating : N/A
Elevator Links, Size and Rating : 12' x 2 3/4" 350 ton

Section B Rotary Equipment
B1 Swivel
Manufacturer : Continental Emsco
Model : LB-400
Load Rating : 400 Ton
Kelly Cock : N/A

Quick Change Packing Assembly : Yes
Kelly Spinner Make/Type : 1 ea
Rotary Hose Length/Rating : 2 EA. 3 1/2" x 75' x 7,500 psi test

B2 Kelly : 1 ea
Type : Hex
Size : 5 1/4"
Length : 40 ft

B3 Rotary Table and Equipment
Make and Type : Ideco 27 1/2"
Opening : 27 1/2"
Drive : Drawworks Rotary Output utilizing the PO-218 twin disc clutch.
Maximum Input HP (at 125 rpm) : 20,000 ft/lbs. @ 125 rpm in third gear
Master Bushings : Varco MSPC pin drive split master bushing
Static Load Rating : 360 ton
Bowl Inserts for Casing : Number 1,2, and 3

Section C Pumping and High Pressure Discharge System
C1 Mud Pump
Number : No. 1
Type : H-700
Drive : 2 Ea. 3408 Engine compound
Maximum Input Horse Power per Pump : 800 HP
Liner Sizes Available : 6 and 5 1/2
Pulsation Dampeners (1/pump) : Hydril K-20 x 5.000 psi
Reset Relief Valves (1/pump) : Oteco 3" x 5.000 psi c/w flange conn.
Charging Pumps (1/pump) : 5" x 6"x 11"with 75 HP electrical motor
Suction Strainer : Yes
Discharge Strainer : Yes

C2 Mud Pump
Number : No. 2
Type : H-700
Drive : 3412 Engine
Maximum Input Horse Power per Pump : 800 HP
Liner Sizes Available : 6 and 5 1/2
Pulsation Dampeners (1/pump) : Hydril K-20 x 5.000 psi
Reset Relief Valves (1/pump) : Oteco 3" x 5.000 psi c/w flange conn.
Charging Pumps (1/pump) : 5" x 6"x 11"with 75 HP electrical motor
Suction Strainer : Yes
Discharge Strainer : Yes

C3 Mud Pump No. 3
Number : H-700
Type : 3412 Engine
Drive : 800 HP
Maximum Input Horse Power per Pump : 6 and 5 1/2
Liner Sizes Available : Hydril K-20 x 5.000 psi
Pulsation Dampeners (1/pump) : Oteco 3" x 5.000 psi c/w flange conn.
Reset Relief Valves (1/pump) : 5" x 6"x 11"with 75 HP electrical motor
Charging Pumps (1/pump) : Yes
Suction Strainer : Yes
Discharge Strainer

C4 Mud Pump No. 4
Number : H-700
Type : 3412 Engine
Drive : 800 HP
Maximum Input Horse Power per Pump : 6 and 5 1/2
Liner Sizes Available : Hydril K-20 x 5.000 psi
Pulsation Dampeners (1/pump) : Oteco 3" x 5.000 psi c/w flange conn.
Reset Relief Valves (1/pump) : 5" x 6"x 11"with 75 HP electrical motor
Charging Pumps (1/pump) : Yes
Suction Strainer : Yes
Discharge Strainer

C5 High Pressure Mud Lines
Discharge Line : 4" Fabricate in Colombia
Working Pressure : 5.000 Psi
Standpipe Manifold : 1x 4" x 5.000 PSI
Rotary Hose (1+1 spare) : 2 ea 3 1/2"x 75 ft x 5.000 psi working pressure
Standpipe (s) : Single

Section D Low Pressure Mud System
D1 Mud Mixing
Hoppers - Make & Type : 2 each Brandt MH-6WVT
Location : Above suction tank and premix tank
Mud Weight Capacity : 16.0 ppg
Low Pressure Pumps - Make & Type : 2 each Mission 5" x 6" x 14"
Drive : 75 HP electric motor
Covered Area : No Cover Area Available
Mixing Facilities : Mixing area is covered

D2 Active Mud Tanks
Shaker Tank 1, 2 & 3 (size & capacity) : 10' wide x 8' high x 12´ long
115 BLS EA with steel roofs
Intermediate Tank 4 & 5 & 6 (size & capacity) : 10' wide x 8' high x 12' long
115 BLS EA with steel roofs
Suction Tank 7 & 8 (size & capacity) : 10' wide x 8' high x 12' long
115 BLS EA with steel roofs
Mud Agitators (No. & HP) : 7 each 10 HP(To buy in Colombia to Brantd)
Mud Guns Number : 6 each
Pill Tank (capacity) : 1 EA 115 BLS
Sand Trap (capacity) : 115 barrel
Mud flumen and flow channels : Flow Trough available from shale
pit to suction pit

D3 Reserve Mud Tank
Tank 1 (size & capacity) : 115 bbls
Tank 2 (size & capacity) : 115 bbls
Mud Agitators (No. & HP) : 2 each 10 HP
High Pressure Mud Guns : N/A

D4 Trip Tank
Capacity : 50 barrel
Level Indicator : E-mud system, with manuel gauge as back-up
Location : Separate isolated tank located in front of shale pit
Fill System : Independent 2 x 3 centrifugal driven by a 25 HP electric motor

D5 Shale Shaker 2nd Stage Linear :
Number : 3 each
Make and Type :Brandt King Cobra
Max flowrate (GPM) : 400 gallon per shaker depending on screens and
mud properties
Screen sizes available : Operator's Account

D6 Mud Conditioner :
Make and type : Brandt King Cobra
No. of cones - sizes : 2 x 10" & 16 x 4"
Max flowrate (GPM) : 1000 GPM
Feed Pump - make and type : 2 Electrical Powered 5x6x11 Charge Pump
Drive Motor : 2 ea. 75 HP electrical motor

Section E Prime Movers / Transmission / Electric
E1 Diesel Engines :
Number : 4 each
Manufacturer : Caterpillar
Type : D3408 single Turbocharge
Continuous Output (HP) at RPM : 500 HP at 1800 RPM
Fuel Consumption : 6 gallon per hour
Noise Reduction (barriers,silencers,insulation) : Not Available

E2 Transmission : 4 Each
Manufacturer : Allison Transmision
Model : 6160 CLBT
Output Drive Type : Compound

E4 AC Distribution system
Manufacturer : Allen Bradley
Type : 2100 ACTO 8A 1BRXX
Rating : 600 KW
Input/Output : 480/220

Section F Auxiliaries, Drilling Rig Skidding
F1 Air Compressors
Number : 2 ea
Make and type : 2 ea Quincy 5120
Power Supply & Pressure : 30 HP 230/460 volt 3 phase electric motor
Air Receivers (Volume) : 120 gallon
Location : compressors skit

F2 Air Compressors
Number : 1 ea
Make and type : sullair
Power Supply & Pressure : 30 HP 230/460 volt 3 phase electric motor
Air Receivers (Volume) :120 gallon
Location : compressors skit

F3 Wireline Unit
Make & Type : Mathey
Wire Size : 0.092
Length : 15,000ft
Power : 15 HP electric motor

F4 Doghouse
Number : 2 EA
Size : 8' x 8' x 12'
Location : Rig Floor

Section G Blowout Prevention And Well Control Equipment
G1 Annular Type Preventers
Size : 13 5/8"
Make and Type : Shaffer
Pressure Rating : 5,000psi
Bottom Connection : 13 5/8" 5m clamp Connection (BX-160 Ring Gasket)
Top Connection : 13 5/8" 5m Clamp Connection (BX-160 Ring Gasket)

G2 Ram Type Preventers
Size : 13 5/8"
Pressure Rating : 5,000 psi
Make and type : 3 ea. Shaffer Type "" SL Single
Top Connection : 13 5/8" 5m Clamp Connection (BX-160 Ring Gasket)
Bottom Connection : 13 5/8" 5m Clamp Connection (BX-160 Ring Gasket)
Outlet size, location and connections : 4 1/16" 5m flange Connection
(RX-39 Ring Gasket)
Connection on each side of ram bodies. : Yes

G3 Rams (Specify qty, for G2 )
13 3/8" Rams : Not Available
9 5/8" Rams : One Set
7" Rams : One Set
5" Rams : Two Set
3 1/2" Rams : One Set
Blind Rams : One Set

G4 Adapter / Mud Corss
Number : One each
Size : 13 5/8"
Pressure Rating : 5,000psi
Height : 20"
Bottom Connection : 13 5/8" 5m Clamp Connection (BX-160 Ring Gasket)
Top Connection : 13 5/8" 5m Clamp Connection (BX-160 Ring Gasket)
Outlets, Size : 2 each 4 1/16" 5m Flanged Connection (RX-39 Ring Gasket)

G5 Adapter / Spacer Spools
Number : One each
Size : 13 5/8" x 11"
Pressure Rating : 5M & 3M
Height : 13"
Bottom Connection : 11" 5m Flange Connection (RX-54 Ring Gasket)
Top Connection : 13 5/8" 5m ClampConnection (BX-160 Ring Gasket)
Outlets, Size : Not Available

G6 Pressure Unit and Control
Make and Type : Koomey Model T20120-3S
Capacity, Accumulator Pressure : 200gal, 3,000psi Accumulator Pressure
No. of Accumulator Bottles : 20 Bottles each 11gal
Main Control - location : 60 feet from well bore
no. of station : 5 each
no. of stations : 6 each
Accumulator Flowmeter : Not Available
Emergency Power : Air
Reservoir Capacity : 300 gallons
No. of Electric Pumps : One each Koomey Triplex pump powered by a
25 HP electric motor
No. of Air Pumps : 2 EA

G7 Choke Manifold
Pressure Rating : 5,000psi
Positive Choke, Make, Type, Size : Not Available
Adjustable Choke, Make, Type, : Cameron 2" 5m
Remote Controlled Chokes : Swaco
Remote Choke Controls Location : Rig Floor
Gate Valves with Flanges : 10 ea 3 1/8" 5M
Buffer Size and Pressure Rating : 8" OD and 10000psi
Automatic Choke Control : One each Swaco Panel on Rig Floor
Choke line hose : Yes 3 1/8" x 36 ft with flange
HCR Valve on Choke Line : Controlled at Koomey unit or Remote on rig floor

Section H Drilling Rig Floor Equipment
H1 Winches
Number : Two each
Make and Type : Ingersoll Rand
Line Size : 3/4"
Capacity :10,000 lbs
Location : Rig Floor

Section I Drilling/Coring String

Section J 3-1/2" Drilling String

Section K Parameters Recording/Indicating Equipment

K1 Weight Indicator
Make and Type : Atlas FS Martin Decker Type "E"

K2 Torque Indicator
Make and Type : MD Totco, Analog Martin Decker 0-500 Mounted in Driller's Console

K3 Rotary (RPM)
Make and Type : Totco 0-300

K4 Wireline Anchor
Make and Type : Matin Decker National Type "EB"

K5 Tong Torque Indicator
Make and Type : Martin Decker 0-25,000 ft/lbs

O1 Fuel Tanks : Rig Camp
Number : 1 each One each
Capacity : 360 barrels 120 barrels
Equipped with Fuel Level Sight Gauge and Tank Marked by Inch Calibration : Yes
Fuel Flow Meters : Not Available
Receiving Tank can be Isolated : Yes

O2 Water Tank
Number : 3 each
Capacity : 360 barrel each
Location : Rig Site
Flow Meters : Not Available

O3 D-5 Tractor
Make and Type : Caterpillar tipo D-5 Allenco Tractor
Description : Allenco type crene
Capacity : 10.000 pounds
Number : 2

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------------
Search words (for official use only) :
OIME TBA 2000 Heli Rig for Sale
1500hp OIME TBA 2000 Heli Rig for Sale
Heli Rig for Sale
OIME TBA 2000 Drilling Rig for Sale
Helicopter Rig 1500hp for Sale in USA
---------------------------------------------------------------------------------------------------------------

OIME TBA 2000 Heli Rig for Sale

ID 2228

Worldoils Marketplace

Worldrigs ID: WR2452

OIME 3000 Drilling Rig for Sale
3000HP Mexico Refurbished Drill Rig for Sale

Description:

3000 HP Mexico Refurbished 2016

Drawworks : 3000 HP., 680 Ton. to 12 lines
Mast height : 146 feet, (57.48 mts.), 680 ton.
Substructure height : 32 feet, (9.7 mts.) 630.4 ton. (static load)
Rotary Table : 371/2 inches, 650 ton

Power system :
4 engines CAT D-399, 1,300 HP, 1,200 rpm
4 AC generators KATO: (3) 1,287.5 KVA and (1) 1,250.5 KVA,
600 VCA, 3 PH., 60Hz.

Power Control Room (PCR):
4 power conveter module (SCR), with main breaker 1,600 amps.
to 9 DC motors 1000 hp: 3 to drawworks and 6 to mus pumps.

AC Transformers :
(1) 1,000 KVA, 600/480 VAC
(1) 500 KVA, 600/208-127 VAC
(1) 112 KVA, 480/208-127 VCA
(1) 25 KVA, 480/240 VCA
(1) 25 KVA, 600/208-127 VCA

Motors Control Center (MCC):
480 VAC, to AC motors to auxiliary loads from rig including lighting system.

Component          Manufacturer   Model         Capacity/Horse Power
                                 (Type)       (Fuel (Diesel)      (3,000 HP)
                                                  Electric AC/DC)
Drawworks              OMIE           Hercules E-3000 3000 HP, 612 ton. with 3 DC motors 1,000HP.
Mast                       PARCO        ---------               1,500,000 pounds (680 Ton.) 146 feet (44.5mts.)
Crown block           PARCO        7-60                    760 Ton.
Travelling block     Continental
                              EMSCO       RA-60                  750 Ton.
Rotary table          IDECO         375-E                   37-1/2 ", 650 Ton.
Wire line achor     NATIONAL   TIPO EB               54.4 Ton
                             OILWELL
Power generation  CAT          D-399                    4 Engines 1,300 HP.
                               KATO      1030-685361111 4 AC Generators:(1)1,287.5 KVA,(3) 1,250.5KVA
Power control system ROSS    1202                    4 SCR's (with breaker 1,600 A)
                                   HILLS
Mud pumps       Gardner Denver  (1) PZ.11           3 Triplex pump 1,600 HP.
                          Lanzhou              (2) 3N81600
Koomey control KOOMEY            T20120-3S        3,000 psi
system

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------------
Search words (for official use only) :
OIME 3000 Drilling Rig for Sale
3000HP Mexico Refurbished Drill Rig for Sale
Mexico Refurbished Drill Rig for Sale in USA
OIME 3000 Drilling Rig in USA
3000HP Refurbished Drill Rig for Sale
---------------------------------------------------------------------------------------------------------------

OIME 3000 Drilling Rig for Sale

ID 2452

Ingersoll Rand T4W Drilling Rig for Sale

Worldoils Marketplace

Worldrigs ID: WR2230

Ingersoll Rand T4W Drilling Rig for Sale
Ingersoll Rand T4W Used Drilling Rig

Description :

Derrick: Long Derrick 44' Long, 7000 Pull Back Rated 4000ft, Hendricks Frame

Rig Power : Cummings Engine 600 Horse Manual, Newly Rebuilt less than 40 hours. 900-350 Compressor.

Engine : Driving Crane Carrier Engine, Inline 6 with Blower, Detroit 671 Series. Rebuilt and has 3000 miles.

Runs Range 2 pipe, 7 inch, 33 ft long. New style Hammer Oiler, Drill pipe 25 Foot Joints.

4050 ft. of 25’ joints of drill pipe, Threads are 4 1/2 regular.

Auxillary Compressor: Ingersoll Rand 1170 Aid Compressor Auxiliary Skid Mounted

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Ingersoll Rand T4W Drilling Rig for Sale
Ingersoll Rand T4W Used Drilling Rig
1986 Built Ingersoll Rand T4W Drilling Rig
Ingersoll Rand T4W Drilling Rig in USA
Ingersoll Rand T4W Drilling Rig - 1986 Built
---------------------------------------------------------------------------------------------------------------

Ingersoll Rand T4W Drilling Rig for Sale

ID 2230

CABOT 1200 Trailer Mounted Drilling Rig for Sale

Worldoils Marketplace

Worldrigs ID: WR2454

CABOT 1200 Trailer Mounted Drilling Rig for Sale
1200 hp Trailer Mounted Drilling Rig for Sale

Description :

Drawworks :
Ingersoll-Rand (IRI) 1500 series trailer mounted rig with
IRI 2550 mechanical drawworks with twin parmac
V-80 hydromatic brakes

Rotary Table :
CE 271/2 rotary, independently driven by one (1) hydraulic motor

Engines and Generators :
Two (2) CAT 3412 DITA electronic controlled diesel engines rated
750 HP each at 2100 RPM with ALLISON model 56600 transmissions,
complete with hydraulic controls, powering the 1500 HP drawworks.

Overhead String :
300 ton, 5 sheave, travelling block and one 350 ton hook.
11/4 drilling line.

Mast :
IRI 136' mst with 700,000# hookload-mast has capability to
accommodate a 700 hp top drive

Substructure :
IRI 22' telescoping substructure rated at 700,000# rotary load
with 400,000# simultaneous setback

Mud Tanks :
Two (2) tanks, 800 BBL

Solids Equipment :
Two SWACO AWD Linear motion shale shakers, SWACO degasser,
SWACO 2 cone desnader, SWACO 12 cone desilter, and flour
mud agitators

Mud Pumps :
Two (2) HH model F-1000 triplex mud pumps. Powered by Caterpillar
model D399TA Diesel engines. Suctions charged by A6"x5", series
178 centrifugal pumps and an EMSCO style discharge pulsation
dampeners.

Trip Tank :
100 BBL W/ (2) 50 BBL compartments W/ 2" x 3" centrifugal pump

Well Control Equipment :
One (1) CIW 13 5/8 5M double BOP W/hydril 13 5/8M annular,

Accumulator :
Koomey Type 8-0 (5) five-station closing unit, with (16) 11 gallon
accumulator bottles, (1) triplex pump, (2) air pumps with 120:1 ratio

Catwalk :
Steel deck 18"H

Generator/Utility House :
Two (2) caterpillar 350 KW AC generators, powered by CAT C-15
diesel engines W/electric start, air compressors and MCC panel

Water Tank :
400 BBL complete W/(2) 3" x 2" series 250 centrifugal water pumps
powered by 20 hp AC electric motors

Fuel Tank :
10,000 gallon W/(2) roper 3 hp fuel transfer pump

Drillers Doghouse :
Drillers Doghouse 8' x 26'

Auxiliary Equipment :
(2) H5UL air hoist, VARCO SSW 30 hydraulic drill pipe spinner

Instrumentation :
Weight indicator, W/tong line pull, pump pressure & rotary torque
gauges, type "D" 5,000 PSI mud pressure gauge

Wireline Machine :
Mathey retriever W/15,000' OF .092 wireline

Well Site Trailers :
Rig manager trailer 12'x56', crew change house

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us anemail to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------
Search Words (for official use only) :
CABOT 1200 Trailer Mounted Drilling Rig for Sale
1200 hp Trailer Mounted Drilling Rig for Sale
Trailer Mounted Drilling Rig for Sale in USA
CABOT 1200 Drilling Rig for Sale
Used Trailer Mounted Drilling Rig for Sale
---------------------------------------------------------------------------------------------------

CABOT 1200 Trailer Mounted Drilling Rig for Sale

ID 2454

Acker Soil Scout Track Mounted Drill Rig for Sale

Worldoils Marketplace

Worldrigs ID: WR1365

Acker Soil Scout Track Mounted Drill Rig for Sale
2009 built Acker Soil Scout Drilling Rig

Model : Soil Scout Drill Rig
Manufacturer : Acker
Condition : Used
Year : 2009

Description:

2009 Acker Soil Scout Track Mounted Drill Rig
Cathead hammer
Drilling Clearance less than 8 feet
47-½" inches wide for access
Power Unit - 58 HP @ 2,300 RPM diesel engine with 12-volt electric start engine.
Feed Mechanism - The main feed consists of double acting chain drive mechanism
connected to a hydraulic cylinder with 48” stroke and capable of 11,000 lbs. upward
thrust and 11,000 lbs. pull down. Feed speeds are 0-72 RPM up and down.

Drill Drive - Taken from prime mover through a variable volume over center piston
pump and tandem fi xed volume pump.
Drill Head - 4-Speed. 3-5/8” open spindle.
1st gear (0-120 RPM @ 3,028 ft./lbs. torque)
2nd gear (0-252 RPM @ 1,452 ft./lbs. torque)
3rd gear (0-456 RPM @ 788 ft./lbs. torque)
4th gear (0-750 RPM @ 458 ft./lbs. torque)
Mast - Welded rectangular structural steel tube construction that supports
and guides the rotation of feed components.
Positioned with one (1) hydraulic cylinder and rigidly held in the vertical position for
drilling and is lowered to the travel position for moving from hole to hole.

Mast mounting allows for angle as well as 90 degree vertical drilling. Also includes
mast dump up to 36”. Includes crown block with sheaves.

Track Mounting - The entire drill is mounted on a structural steel frame and is
self-propelled by 9” rubber crawler tracks with independent reversible hydraulic
motor drive as well as full function remote radio control. Ground bearing
pressure 5.2 P.S.I. without options or tooling.

Hydraulic Oil Cooler
Hydraulic Leveling Jacks - (4)
Hydraulic Engine Tilt - For diffi cult site conditions.
Low Clearance Sheave Block Assembly - For use with cathead operation in low ceiling situations.

Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------------------------------------------
Search words(for official use only) -
Acker Soil Scout Track Mounted Drill Rig for Sale
2009 built Acker Soil Scout Drilling Rig
Acker Soil Scout Used Drilling Rig
Acker Land Drilling Rig for Sale
Used Acker Soil Scout Drilling Rig
Acker Soil Scout Track Mounted Drill Rig in USA
--------------------------------------------------------------------------------------------------------

Acker Soil Scout Track Mounted Drill Rig - for Sale

ID 1365

Worldoils Marketplace

Worldrigs ID: WR674

LCI 750 Drilling Rig for Sale
Carrier Mounted Drilling Rig for Sale
1000 HP drilling rig for sale

Introduction :
The rig is a loadcraft industries 750 drilling rig with mast hook load capacity of 365.000 lbs
(160 metric ton), powered by two caterpillar C15 diesel engines, coupled two allison 6061 RB
transmissions with torque converter. The mast is 114ft (36m) rated at 365.000 lbs API capacity.
Drawworks have 1000hp capacity. All equipment is mounted on a 7 axle carrier. The rig is
equipped with a telescoping substructure at 17ft 6 inches (5.3m) height.
The mast is equipped with a torque arrest beam for the top drive and with piping and necessary
loops to operate the top drive. The total rig is built for extremely quick rig up/down time.
The TD is a northdrill API 250 ton rated with continuous torque rating of 40.500 ft-lbs.
All necessary equipment to operate the top drive in is included with the rig.

1. Carrier
Section 1.1 carrier
- Seven axle heavy-duty carrier for load of 140.000 lbs. Fully equipped with lights and brakes
etc for normal driving operation. All axles have spring brake chambers for safety.
- Tires and wheels are disc wheels, 14"20 all terrain tread. Tire rating of 52.000 psi total.
Two spares delivered.
- Two 100 gallon (2x420 L) fuel tanks side mounted on carrier frame, connected for equalization.
- One toolbox storage box of steel with reinforced lockable doors.
- Eight side platforms with handrails on both sides along the carrier body, four on each side.
Each platform is approx. 6ft x 2 ft (1,8x0,6m)
- One staircase section from side platforms to ground level.
- Hercules 129 HA deadline anchor to be used with compression type weight sensor. Drum type
mounted on carrier frame in front of drawworks frame, hydraulic sensor included.
- Four pedestals to go under front jacks for rig stability.
- Total of six jacks for leveling the rig.

Section 1.2 hydraulic system
- 50 GPM (190 LPM) hydraulic system, design to operate at minimum 2000 psi with rating of
50 gpm at 2100 psi.
- Hydraulic pump driven from PTO on transmission.
- Air activated clutch for pump engagement.
- 325 gallon (1230 L) hydraulic oil tank with filler cap, breather, oil level, oil temp.

Section 1.3 tong circuits
- Tong hydraulic circuit is designed to operate up to 50 gpm at 2000 psi.
- Includes connectors, pressure & return lines, pressure gauge, directional flow valve and pressure
regulating valve.

Section 1.4 handling winch
- Hydraulic powered planetary winch 8000 lb (3.6 t) line pull, rated at 100 ft (30m) per minute at
2000 psi hyd. pressure.
- 325 ft (99m) of 1/2" line on drum
- Fail safe brake (in/out hydraulic activated)
- Winch sheaves provided in crown
- Protection cage on winch
- Controls at operators console

2. Main power/engine
Section 2.1 engine/transmission
-Two caterpillar C-15 540 hp diesel engines
- Equipped with limiting speed governor, air throttle sctuator, lube and fuel filters, alternator and
flywheel housing.
- High ambient radiators and suction fan, permanent type anti-freeze, signel exhaust with spark
arrester diverted to off-operator side with mufflers.
- Engine kill valve located at operators console
- Electric start (remote from operators console)
- Both engines can run at the same time or only one if adequate.

Section 2.2 transmission
- Allison S 6061 RB model six-speed transmission (five fwd 1 rw)
- With converter and oil cooler
- Air over hydraulic controls, with air line indicator system
- Controls available at operators console and in drivers cabin

3. Drawworks
Section 3.1 drawworks
- Model 4212 drum winch assembly
- Full air, fawick "28VC-1000" clutch outside drawworks frame.
- Brakes are 42" (107 cm) diameter x 12" (30,5 cm) wide, lined with 1 inch (2,5 cm) x 12" (30,5 cm)
- API driled brake blocks, full wrap dead-end equalized
- Brake rims are removable with rings for splash water cooling
- Brake operatoin shafts are mounted on ball bearings; these are self engaging and release
by operator.
- Drum barrel is 18" (45,7 cm) in diameter, and 38" (96,5 cm) long, mounted on double row
self-aligning spherical roller bearings on a 6 1/2" (16,5 cm) drum shaft
- Clutch single line pull is 42.500 lb on bare drum and first gear.

Section 3.2 lubrication
- Centralized lubrication system to all bearings and brake linkage on drawworks, is located
outside frame.

Section 3.3 brake water cooling
- Closed loop brake cooling system, mounted on carrier
- Includes 425 gallon tank with covered top, with level indicator
- Removable cap with drain system, breather and fill cap.

Section 3.4 drawworks drive
- ASA-100-3 (1 1/4") pitch, triple stand, roller chain
- Chain drive from input sprocket to sprocket on jackshaft
- ASA-100-3 (1 1/4") pitch, triple stand, roller chain as final drive to main drum

Section 3.5 main drum - grooved jacket
- Lebus counter balanced sleeve is grooved for 1 1/8" wireline, to assist spooling, and reduced line wear.

Section 3.6 hydrotarder
- Parmac 202 hydrodynamic brake assembly with dual rotary
- Fawick 28 VC 1000 air clutch, gates, inlet air valve and piping
- 325 gallon (1230 L) water tank, lines, valves and plumbing installed on rig.
- Drive from the main drum thru triple stand 1 1/4" pitch drive chain.

Section 3.7 combined gearbox
- Cushman model 279 combined gearbox consisting of right angle gearbox and dropbox.
- Right angle gearbox ratio 1:1 to drive single drum drawworks. Dropbox to transfer torque to rotary.
- Pressurized lubrication system.

Section 3.8 sandline drum
- Sandline drum with 42x8 brake size, for handling 16,500 ft of 9/16" wireline on drum
- Brakes are removable for water splash cooling of the brake rims
- Single line pull is 26,000 lbs on the drum

Section 3.9 rotary drive
- Provided at the dropbox for power connection- Elevated chain drive is oil bath type consisting of drive
sprocket at bottom of case with ASA 140-2 (1 3/4") pitch double

4. Mast
Section 4.1 mast
- 114 ft (33,5m) clear working height with an API rated static hook load of 330.000 lb with 8 lines,
and 365.000 lb with 10 lines.
- Designed to withstand 69mph winds from any direction
- Telescoping twin box structure designed and built to API standards.
- Two section with upper section telescoping into lower section for rig move operation.
- Automatic mast latching in raised or lowered position
- Lock and operating control located at base of mast
- Ladder from base to crown with safety blocks for personnel
- All necessary chains, turnbuckles, pins etc included and certified
- 4 inch standpipe rated 5000 lb, welded with 1502 unions.

Section 4.2 crown assembly
- Bender crown arrangement for 8 or 10 lines string up with conventional block.
- One 36" fastline sheave, grooved for 1 1/8"
- One 36" deadline sheave, grooved for 1 1/8"
- Four 30" sheaves cross mounted, grooved for 1 1/8"
- Two catline sheaves
- Crown sheaves are steel with flame hardened grooves.
- Sheaves are mounted on timken tapered roller bearings and all carry certification.
- Crown platform with railing for personnel safety
- Attachment point for four wind guylines from crown to ground is provided.

Section 4.3 tubing board
- All welded construction
- Automatically raised or lowered at mast telescoping
- Mounted at 55 ft above setback
- Board fingers are for 17.000 ft of 2 7/8", or 11.400 ft of 3 1/2" tubing
- 2 ft 6 inch wide tubing board walkway
- Handrails at board outside
- Attachment points for safety line (escape line) at each corner.

Section 4.4 weight indicator
- Weight indicator complete with sensor
- 12" dial indicator
- Box mount with 25ft of hose assembly
- Calibrated in NM and LBS
- Charts for 6, 8 and 10 lines on indicator

Section 4.5 crown saver
- Load and crown saver installed on drawworks
- Automatically disengages clutch and sets drawwork brakes if block comes too close to crown.

5. Substructure
Section 5.1 hydraulic telescoping substructure
- Working floor height of 17,5 ft (5,3m) with 14 ft in clear under rotary beams
- 4,5 ft is the maximum height when scoped down for transportation
- 10ft 6 in max width when scoped down
- Capacity of 365.000 lbs (160 mt) on rotary beams and 225.000 lbs (100mt) at setback
- Sub base is equipped with fold out wings, total floor area is 18ft wide x 18ft long
- Handrails with toeplate surrounding the entire floor
- One stairway from floor to carrier level
- Pipe ramp with steel plating
- Setback covered with 3" oak timbers
- Two tong backup poles in drilling configuration
- Rat and mousehole access
- BOP handling system with to rails integrated under the floor. Each rail rated at 5 ton.
- Carrier ramp is included with the sub, 10 ft wide to allow the rig to rest completely on the base of
the ramp. Comes in two sections.

Section 5.2 catwalk
- Catwalk assy of 4ft wide x 45 ft long x 3 ft high with built in stair , and bump post.

Section 5.3 hydraulic catworks - make & break-out
- Breakout cylinder has 6ft stroke with 20.000 lb maximum line pull
- Makeup cylinder has 6ft stroke with 20.000 lb maximum line pull
- Cylinder mounted in lower mast section, and includes wireline, turn back sheaves and plumbing
for hydraulics
- Both cylinders are controlled from operators console

6. Top drive
Section 6.1 TD power pack
- One 20ft oilfield skid power pack mounted in a weather and sound protective 30ft container.
- Main motor caterpillar C18 700 hp
- Main HPU at 550kW for TD main power, 2400 L reservoir, two main pumps
- Inline filters for all lines
- Engine driven and electric driven aux hpu for pipehandler functions
- Advanced PLC & HMI system to monitor and control TD system
- All controls integrated at operators console on rig floor
- Quick connectors for all cables and lines on TD system for quick rig up/down

Section 6.2 TD rig equipment
- Mast outfitted with piping for quicker rig up/down with the TD system
- Torque tube beam installed in the mast, and anchored to the mast lower section
- Turnbuckles, chain etc for the torque beam
- Loops from mast to TD (stays in the mast during rig move)

Section 6.3 TD hookup to rig
- The TD power pack connects to the rig by 4 hydraulic hoses that connect on ground level
at the base of the mast
- One 1/4" electrical cable is run up the mast and to the TD for control system
- Five 1/2" electrical cables is run to the operator console for TD operator control
- A power input of 440,160 or 480v to supply the system with electricity
- 1 kW is sufficient to run the system, 40 kW is needed to operate the electrical aux HPU

Section 6.4 TD main specifications
- Continuous torque rating of 40.500 ft-lbs
- Max rpm of 110 in first gear, and 180 in second gear
- Max breakout rating of 43.000 ft-lbs
- Pin connection 6 5/8 RH
- TD is equipped with onboard oil cooler
- Electric over hydraulic onboard valve section for all function control
- Onboard PLC and monitoring equipment

Section 6.5 TD pipehandler specifications
- 360 degrees free traveling orientation
- Backup tong capable of holding up to 80.000 Nm and range from 3 1/2" to 6 5/8" pipe
- Link tilt and retract function for drilling down to floor
- Integrated availability for remote operated elevator
- Upper remote operated IBOP and lower manually operated IBOP rated at 10.00 psi
- Telescopic leg for positioning of backup tong for make or break of saver sub
- Link arms 108 inch
- Manual elevator for 3 1/2" pipe
- Saver sub to 6 5/8 RH and to 5" RH

7. Additional equipment
Section 7.1 handling winch nr.2
- One additional winch equal to above listed handling winch specs

Section 7.2 V-door ramp and pipe racks
- One 48in x 3ft6in x 45ft catwalk from the rig floor level to the 42in high catwalks
- Four 42in x 28ft long pipe racks

Section 7.3 rotary table
- One 22" rotary table, 44" centers complete with split square solid steel master bushing,
spiral bevel gears, precision bearings throughout, removable box cover with lifting eyes,
positive pinion shaft lock and centralized lube system

Section 7.4 high pressure piping
- One 4" 5000 psi mud line and manifold for gauge and kill line, with 1502 union
- 4" 5000 psi standpipe on the lower mast section, with 1502 unions

Section 7.5 crown o'matic
- Combined crown and drawworks type crown-o-matic system for saving mast failures is
installed on the drawworks, and is set for locking the brakes down at activation

Section 7.6 safety chair (board escape)
- One T-bar type escape chair for tubingboard escape

Section 7.7 mast guylines
- Guylines are included, four of 5/8 lines from crown, two from board and two from the mast
mid section. All certified

Section 7.8 block hook
- One of ABCO 250 ton standard hook block
- Clevis kit for use with TD to shorten total assembly length included

Section 7.9 wire rope
- Drill line 1 1/8" wireline rope at 2500 ft, certificates provided
- Drill line spool is included at the front of the carrier by the cab
- 12.000 ft of sandline 9/16" included

Section 7.10 dead line anchor-indicator assy
- Anchor for 1,125" wirerope, for mast pull of 365.000 lbs for 10 lines string up on crown
- Anchor certified, and load cell included

ND 250 H2 (dual ratio)
- Continuous drill torque : 29.800 / 41.000 ft-lbs
- Max breakout torque : 43.000 ft-lbs
- Speed range : 0-200 rpm
- Dual ratio gearbox : Yes
- Gearbox ratio : 1:11.1 / 1:14.9
- Hydraulic motors : 2 x 320 kW max
- System total power rating : 700 hp
- Hydraulic system pressure : 6000 psi / 3000 psi
- Powering engine : C18

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------------------------------------------
Search words(for official use only) :
LCI 750 Drilling Rig for Sale
Used 1000hp Carrier Mounted Drilling rig
1000 HP Drilling Rig for Sale - LCI 750
1000hp Land Rig Builders
1000hp Land Rig Dealers
Drilling Land Rig for Sale - LCI 750 - 1000 HP
1000HP land Rig For Sale
Carrier Mounted Drilling Rig for Sale
1000 HP Land Drilling Rig For Sale - LCI 750
----------------------------------------------------------------------------------------------------

LCI 750 Drilling Rig - 1000 HP - for Sale

ID 674

Worldoils Marketplace

Worldrigs ID: WR670

SCR drilling rig for sale
Used American 1000HP Land Rig
Gardner Denver 1000 HP SCR drilling rig for sale

Drawworks :
• Gardner Denver 1000 HP Drawworks with water brake.
• Powered by (1) 752 series type traction motors.

Mast :
• DSI
• 142’ x 25’ mast rated at 750,000 lb. static hookload, 500,000 lb. setback

Substructure :
• DSI
• 22’ substructure with rotary capacity at 750,000 lb. and a setback of 500,000 lb.
• Sub is a box-on-box type.

Pumps :
• Two (2) F1600 pumps
• Independently powered by two (2) 752 traction motors.
• Pumps complete with all plumbing, pulsation dampeners, and 5x6 charge pumps.

Rig Houses, tanks :
• Drillers top doghouse= 9’ H x 8’6” W x 35’L
• Mudhouse= 9’H x 10’ W x 35’ L
• Partshouse= 9’H x 10’ W x 45’ L
• Water Storage= 9’ H x 10’ W x 45’ L with two (2) 2” x 3” centrifugal pumps.
• Fueltank= 12,000 gallons

Mudsystem :
• Two 8’6” H x 10’ W x 47’ L mudtanks (1000 BBL)
• Tanks to have necessary piping, valves, dump gates, & compartments
• One 2-cone desander
• One 10-cone desilter
• Two derrick style linear shaker
• Four mud agitators with 10HP motors
• Four 5” x 6” centrifugal pumps with 75HP motors

Rotary Equipment :
• One 27-1/2” rotary table
• One 400 ton swivel
• One Varco model HD Kelly drive bushing

Traveling Equipment :
• One 400 ton block
• One set of 3 ½” x 108 elevator links

Well Control :
• One 11” x 5000 PSI annular
• One 11” double ram preventor
• One 180 Gallon Koomey type closing unit
• One Koomey type remote
• One 2” x 5000 choke manifold
• One B.O.P. lines suitcase

Instrumentation :
• One Totco type 50 weight indicator
• One Totco 100 rotary torque
• Two mudpump SPM
• One rotary RPM
• All above mounted in Totco drilling console
• Geolograph

SCR House :
• Ross Hill 3 generator x 4 SCR system
• 9’ W x 40’ L x 9’ H house

Power Equipment :
• (3) 3512 C Cats with 1050 KW generators
• Generators mounted on 10’ W x 35’ L x 9’ H skids
• (2) Gardner Denver 30 HP screw type compressors
• (1) Gardner Denver cold start compressor

Auxilliary Equipment :
• One Mathey wireline unit
• Two air winches
• Misc. set of handling tools
   (1) Spinnerhawk powertong
   (1) Kelly Spinner
   (3) 18” x 30’ pipe racks

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------------------------------------------
Search Words(for official use only) :
SCR Drilling Rig for Sale
Drilling Rig for Sale - Gardner Denver 1000HP SCR
Used American Land Rigs
Used American 1000hp Drilling rig
1000HP Land Rig Builders
1000HP SCR Gardner Denver drilling rig for sale
Land Drilling Rig For Sale
Gardner Denver drilling rig for Sale
----------------------------------------------------------------------------------------------------

SCR Gardner Denver Drilling Rig - 1000HP - for Sale

ID 670

Challenger M320 Drill Rig & Pipe for Sale

Worldoils Marketplace

Worldrigs ID: WR569

Challenger M320 Drill Rig & Pipe for Sale
Challenger Drilling Rig package - for Sale

Model : M320 Drill Rig & Pipe
Manufacturer : Challenger
Year : N/A
Condition : Used

Description:

Challenger M320 Drill Rig & Package
Mounted on 3-axle trailer
Rig Substructure
Single piece Hydraulically raised mast 64’ x 150,000 lbs double drum
Allison transmission
18’’ rotary table (RT-18’’-2)
Kelly bar 4 ½’’ x 40’
GMC Detroit 8V92N Diesel Engine 360 HP

Included as a package :
(2) Pipe Tubs with almost 5,000' ft of used drill pipe (30' x 4-1/2)
Dog house
Ideal (National supply Co)Type C-250 7-¼" x 15" Duplex Mud Pump, Skid Mounted,
Ratio : 5,64 & Rated output : 250, HP @ 60 RPM, Max 2500 lbs working pressure
Located : Europe

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

--------------------------------------------------------------------------------------------------------
Search words(for official use only) -
Challenger M320 Drill Rig & Pipe for Sale
Challenger Drilling Rig package - for Sale
Land Drilling Rig for Sale
Drilling Rig & Pipe for Sale
Used Challenger M320 Drilling Rig for Sale
Challenger M320 Drill Rig & Pipe for Sale in Europe
--------------------------------------------------------------------------------------------------------

Challenger M320 Drill Rig & Pipe for Sale

ID 569

Witchtex R-4 Trailer Mounted Drilling Rig for Sale

Worldoils Marketplace

Worldrigs ID: WR2227

Witchtex R-4 Trailer Mounted Drilling Rig for Sale
Trailer Mounted Land Drilling Rig for Sale

Description :

Trailer Mounted Rig:
3-Axle Back-In Trailer w/Rotary Beams
6) Hydraulic Leveling Jacks
1) Folding Walkways
1) Safety Rails and Stairways, 11R24.5 Tires, Steel Disc Wheels

Drawworks:
1) D/D Draw works, Groove F/1” Line
1) Makeup and Breakout Catheads
1) Driller’s Console w/Air Controls
1) SGL –Engine Compound P/B Detroit 8V-92 Diesel Engine
1) Allison Torque Converter

Mast:
1) 65’H Hydraulic Raised Mast Reported 180,000 Hook Load
1) Crown Block Assembly
1) Mackissick Block/Hook Combo w/(3) Sheaves F/1” Line,
1) Baash-Ross Type DBM-330 100-Ton Block/Hook Combo w/(3) Sheaves
1) Oilwell 60-C Swivel
1) Gardner-Denver 17 ½” x 44” Rotary Table w/Split Master Bushing
1) Standpipe and Manifold
1) Rotary Hose
1) 4 ¼” Sq. Kelly
1) Baash-Ross 4 ¼” Sq. Kelly Drive Bushing

Mud Pumps:
1) Ameriam 550 6”X14” Duplex Mud Pump w/GH Mattco Fluid End,
Quick-Change Caps, Oteco 2” Shear Relief Valve Type D Pressure Guage,
Hydril K-20-5000 Pulsation Dampener, Rod Cooling Pump, Bull Wheel,
Belt U-12 Detroit Diesel Engine W/Electric Starter Radiator,
Gauges Pump Drive Assembly, Master Skidded

1) National C-250 6X15 with Mattco Fluid End, powered by a
CAT 3406 Diesel Eng W/Electric Starter Radiator, Gauges Pump
Drive Assembly, Master Skidded

Gen Set:
1) 250 KW Light Plant powered by a 3306 CAT Diesel Engine
1) Ingersoll Rand Stand-by Air Compressor
1) Quincy Air Compressor
Top Dog House:
1) 17’W x 16’L Driller’s House w/Round Top, Knowledge Box,
Bench Storage, Parts Bins, (3) Lockers, Heater, Fluorescent Lights,
Skidded
1) Drillograph Single Pen Recorder

Fuel and Water:
1) 18’Dia. x 16’L Approx. 5000 Gal. Fuel Tank, Skidded
1) 14’3”H x 7’6 ½”W x 38’L 220 BBL Crimped Steel Water Tank, Skidded

Miscellaneous:
1) Set of BJ Type C Tongs
1) Set of 2 1/8” x 96” L Elevator Links
1) Web Wilson 150 Ton 4 ½” BN CL Drill Pipe Elevator

1) Lot of (1) 72”H and (1) 62”H x 28’ L Triangular Pipe Racks w/Catwalk Tray
1) 36”H x 7’5”W x 36’L Pipe Tub
1) 7’5”W x 34’L Drill Collar Skid

1) Assorted Rig Hoses, Piping and Stairways
1) 10” 3000 PSI Regan Annular

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Witchtex R-4 Trailer Mounted Drilling Rig for Sale
Trailer Mounted Land Drilling Rig for Sale
Witchtex R-4 Trailer Mounted Used Drilling Rig for Sale
Witchtex R-4 Drilling Rig for Sale in USA
---------------------------------------------------------------------------------------------------------------

Witchtex R-4 Trailer Mounted Drilling Rig for Sale

ID 2227

Worldoils Marketplace

Worldrigs ID: WR1430

Schramm TH130 Drilling Rig for Sale
750 hp Schramm TH130 Drilling Rig for Sale

Description :

Schramm TH130 -,760 hp deck engine, 28 inch (711 mm) table opening ,
1350/350 – 1150/500 variable volume compressor (38 cu. m/min
@ 24.1 bar & 32.6 cu m/min @ 35.5 bar), 50 feet (15.25 m) of clear
head travel, Capable of handling Range III casing

Mast : telescoping, 130,000 lbs. (59,090 kg) actual pullup

Back on Ramp

Mud System : 12 x 50 pit with shale shaker

Mud Pump : D500 Emsco Duplex Pump
(2) 1150 HD x 350 Sullair Comp Hurricane Booster Trailer-Mounted
(2) 1150 HD x 350 Comp Hurricane Booster Trailer Mounted

WB12 Joy Booster

Doghouse, fuel tank, light plant, trailer mounted

Drill Pipe : 3500’, 4 ½” Range 2

Pipe & Collar Trailer

Rig can be set up with mud or air

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) -
Schramm TH130 Drilling Rig for Sale
750hp Schramm TH130 Drilling Rig for Sale
Schramm Drilling Rig for Sale
Schramm TH130 Drilling Rig in USA
2003 Built Schramm Water Well Drilling Rig
Used Schramm Drilling Rig for Sale
---------------------------------------------------------------------------------------------------------

Schramm TH130 Drilling Rig for Sale

ID 1430

MD Cowan (Rig Tech RT 400B) Drilling Rig

Worldoils Marketplace

Worldrigs ID: WR2225

MD Cowan (Rig Tech RT 400B) Drilling Rig for Sale
750 Hp 2008 Built Drilling Rig for Sale

Description:

Rated 12000’
Built in 2008

Drawworks : Rig Tech RT 400B, 750 HP, 500,000 lbs (8 lines), powered
by (1) Caterpillar C18 750 HP

Derrick : 72’ one piece, 500,000# gross capacity

Substructure : 12’ MD Cowan

Rotary Table : n/a

Top Drive : Venture Tech XK 250 hydraulic power, 250 Ton

Iron Roughneck : Bloom & Voss Floor Hand

Traveling Block : Venture Tech 250 Ton

Floor Winches : (2) Ram Hydraulic 5,000lbs, 10,000 lbs

Rig Power Plants : (2) Caterpillar SR4, 455 KW, 1800 rpm, (2) Caterpillar C15’s

BOP: (1) Townsend 11” 3000psi bag type preventer, (1) Townsend
Double 11” 3000psi ram type preventer.

Mud Pumps : (2) Weatherford MP 10 powered by Caterpillar 3508C’s 1000 HP

Mud Tanks : (1) 300bbl

Shale Shaker : n/a

Hydraulic Catwalk : MD Cowan Hydraulic Arm

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) -
MD Cowan (Rig Tech RT 400B) Drilling Rig for Sale
750 Hp 2008 Built Drilling Rig for Sale
2008 Built MD Cowan (Rig Tech RT 400B) Drilling Rig for Sale
MD Cowan Used Drilling Rig for Sale
MD Cowan (Rig Tech RT 400B) Drilling Rig in USA
---------------------------------------------------------------------------------------------------------

MD Cowan (Rig Tech RT 400B) Drilling Rig for Sale

ID 2225

Worldoils Marketplace

Worldrigs ID: WR1918

Superior 1000 Mechanical Drilling Rig for Sale
2006 Built Superior Drilling Rig for Sale

Description :

Drawworks:
Superior 1000M New (2006) Single Drum Drawworks, 1,000 Hp
Lebus grooved for 1-1/4” Drilling Line, Air operated Makeup
& Breakout Catheads, Over-Running Clutch, Air
Driller’s Console, Crown-O-Matic, Right Angle drive for rotary table.

Compound:
2-Engine, In-Line Compound, w/ Right Angle Drive RT
Box For rotary & Draw works drive

Brake:
PARMAC Dual V-80 Hydromatic Brake coupled together

Drawwworks Power:
No. 1 – CATERPILLAR C-18 Diesel Engine S/N# WJH01728,
600 Hp Rated, w/24 Volt Electric Start, Radiator, Gauges,
OILWORKS C-195-100 Torque Converter S/N3444
Air clutch
Hours# 21,597
No. 2 – CATERPILLAR C-18 Diesel Engine S/N# WJH01706,
600 Hp Rated, w/24 Volt Electric Start, Radiator, Gauges,
OILWORKS C-195-100 Torque Converter S/N1616
Air clutch
Hours# 21,664

Mast:
DRILLMASTER New 2008 SN#07632 20’1 1”W x 136’H Cantilever Mast,
With a Gross Nominal Capacity of 930,000 Lbs. and a
650,000 Lb. Static Hook Load, Max wind 91 Knots,
with ten (10) lines. Crown Block w/ (5)42” Sheave Cluster &
1-56”Fast line Sheave grooved for 1-1/4” diameter drilling line.
Each Crown Sheave wire rope groove is flame hardened.
Each Crown Sheave is fitted with Timken roller bearings and grease seals.
Derrick complete with Crown Safety Platform, 20 finger Racking Board W/ electric mule,
Bridal Lines, Tong Counter Weights, Survey Line Sheaves,
Tugger Sheaves, Ladder, Derrick Climber, Geronimo line,
4” Standpipe & Manifold and
Derrick Stand.
Last Certification 8/23/2012

Substructure:
DRILLMASTER New (2009) 29’10”W x 20’H x 48’8”L
(4) Box-On-Box Substructure w/ Rotary Beams, V-Door Ramp,
Stairs, (2) Air Receiver Tanks, NATIONAL Deadline Anchor,
Safety Rails, inside Catwalk Trolley, 7’W x 14’L built in Tool
Room (ODS) (3) Stairs, Outside wall Winterized, Jacking door,
12’ X 12’ Setback spreader, internal stairway, Vapor proof lighting,
Skidded with oilfield tail rolls

Pump: (Primary)
HT F-1000 Triplex Mud Pump New 2006,
S/N HT 20060088, 1,000Hp.
w/ LANZOU Pulsation Dampener S/N HT20060070,
MF 5,000 Psi. Pressure Gauge
FIVE STAR 6”x8”x14” Charging Pump S/N5268 p/b TECO 75 Hp. Electric Motor,
Chinese 3”Shear Relief Value, Master Skidded w/ (2) Engines belt compound

Pump Power:
CATERPILLAR C-18 Diesel Engine S/N WJHO1283,
575 HP w/24 Volt Electric Start, Radiator, Gauges,
V-Belt Drive EATON 18CB500 Air Flex Clutch,
Mounted Pump Master Skid.
Hours # 17,376
CATERPILLAR C-18 Diesel Engine S/N WJH01322,
575 HP w/ 24 Volt Electric Start, Radiator, Gauges,
V-Belt Drive EATON18CB500 Air Flex Clutch,
Mounted Pump Master Skid
Hours#16,277

Pump (Secondary)
HT F-1 000 Triplex Mud Pump New 2006,
S/N HT 20060070, 1,000 Hp.
w/ LANZHOU Pulsation Dampener S/N HT20060069,
MF 5,000 Psi. Pressure Gauge
Five Star 6” x 8” x14” Charging Pump S/N5268 p/b Worldwide 75 Hp.
Electric motor,
3” Shear Relief Valve, Master Skidded w/ (2) Engine belt compound

Pump Power
CATERPILLAR C-18 Diesel Engine S/N WJH-00457,
575 HP w/ 24 volt Electric Start, Radiator, Gauges,
V-Belt Drive, EATON 18CB500 Air Flex Clutch,
Mounted pump Master Skid.
Hours#13,788
CATERPILLAR C1-8 Diesel Engine S/N WJH-00373,
575 HP w/ 24 Volt Electric Start, Radiator, Gauges,
V-Belt Drive, EATON 18CB500 Air Flex Clutch,
Mounted Pump Master Skid.
Hours#16,643

Rotating Equipment:
Rotary Table
Chinese ZP 27-1/2”, New 2006, complies with API split master bushings,
W/ drive shaft coupling.

Swivel
Ideco 300

Kelly
5-1/4” x 42’ Hex Kelly W/ HDS Kelly Drive Bushing

Kelly Spinner
OWI 1500 Kelly Spinner S/N 00475B w/ (2) Air Motors, New

Kelly Valves
Upper Kelly Valve.
Lower Kelly Valve

Travelling Equipment
Sentry Rig Equipment Company
260 Ton Capacity New 2006
4G260 Traveling Block w/ (5) 36” Sheaves, 1-1/4” Line,
Unitized “Hydra-Hook” 260 Ton Capacity

Blowout Preventer and Valves
1 Each -13-5/8" X 5000# Jiangsu Xianz hong Petroleum
Double Gate BOP, Top & Bottom Stud configuration
Including - 1set of 5" Pipe Rams Blocks & 1set of Blind Rams,
With 2 - 4" outlets on each side of Body of BOP

1 Each - 13-5/8" Jiangsu Xianz hong Petroleum ANNULAR BOP
Includes rubber element

1 Each - 13 5/8" X 5000# Type D Drilling Spool W/ - 2" Side Outlet & 3" Side Outlet
[Matched To Choke Manifold

1 Each - Choke Manifold - 3" X 5000# Complete
Inc - Steel Flex Line W/ Flanges To Connect
To BOPS or Drilling Spools

Closing Unit
2008 Jiangsu Xianz hong Petroleum Model FXQ640-6
Closing Unit Accumulator, 6 Station,
Rig Floor Controls and monitor panel,
Complete W/ 15 Bottles, 30 HP Cat 3517 Charge Pump, 21 Air Pumps, & set up
for Nitrogen Bottle Backup
Suitcase Closing Unit Skid 7’-1 0” x 35’ with junk basket

Choke Manifold and Valves
Jiangsu Xianz hong Petroleum Choke Manifold w/ (1) 5-Way Cross,
(3) 4-1/16”x 5M
Gate Valves, (4) 2-9/16” x 5M Gate Valves, (1) Manual
Adjustable Chokes, Hydraulic Adjustable Chokes, Mounted Oil Field Skid.
W/ 2 Kill Valves- & 2-Choke Valves mounted at drilling spool

Rig Houses:
Dog House, DRILLMASTER 9’ 1 1”W x 39’ 1 1”L
Doghouse / Change house Combination w/ 17’5”L
Driller’s House w/ Knowledge Box (5) Lockers, Bench Storage, Heater, Lights.
5’L Breezeway, 1 7’5”L Change House, w/Bench Storage, (16-Lockers,
Cabinets, Heater & Lights. Oil Field Skidded

Generator/Utility Houses
DRILLMASTER 1 1’10”W x 37’9”L x 11’ 6” T
Utility House w/Lights, Oil Field Skidded to include the following items.

No #1 380 Kw. AC CATERPILLAR Generator Package Powered by Caterpillar C-15
Diesel Engine S/N JRE01986 w/ 24 Volt Electric Start, Radiator, HD Air cleaner Gauges.
Marathon 572RSL4025 Generator End SN# 550989-0506, complete with Oil Field skid.
Hours# 17,278

No #2 380 Kw. AC CATERPILLAR Generator Package Powered by Caterpillar C-15
Diesel Engine S/N JRE01985 w/ 24 Volt Electric Start, Radiator, HD Air cleaner Gauges.
Marathon 572RSL4025 Generator End SN# 550989-0507, complete with Oil Field skid.
Hours# 16,933

NO. 1 GARDNER-DENVER EBE99N New 2006
Electro Saver II Rotary Screw Air Compressor S/N# S237421,
P/b TOSHIBA 30 Hp. Electric Motor, Mounted 240 Gallon Horizontal Tank.
Hours# 15,128

SIEMENS Interlock Panel, 600 Amp 480 Volt Main Lockout Disconnects breakers.

ALLEN BRADLEY Electrical Load center with magnetic starter & breakers,

SQUARE D 225 amp 240 volt panel with breakers

SQUARE D 75KVA Transformer 480 volt to 240 volt

DRILLMASTER 7’9”W x 13”H x 43’1”L Electrical
Suitcase.

DRILLMASTER 2’5”W x 1 3”H x 36’3”L Electrical Suitcases.

Mud System:
DRILLMASTER 9’6”W x 7’H x 34’5”L, 394 Bbl. Suction Tank
10’L Covered Porch, (3) Compartments,
(3) MAX 2000 Mud Agitators p/b TECO 25 Hp. Electric Motors,
Sloped Bottom, Top Mounted Walkways, Safety Rails, Lights, Oil Field Skidded.
FIVE STAR 6”x8”x14” Centrifugal Mixing Pump S/N 5284, p/b BALDOR 75 Hp. Electric Motor.
FIVE STAR 6”x8”x14” Centrifugal Mixing Pump S/N 5284, p/b BALDOR 75 Hp. Electric Motor.
With internal jetting system, 3 dump gates,

DRILLMASTER 9’6”W x 7’H x 34’7”L, 394 Bbl. Shaker Tank
10’L Covered Porch, (3) Compartments
MAX 2000 Mud Agitator Agitators p/b TECO 25 Hp. Electric Motors,
Sloped Bottom, Top Mounted Walkways, Safety Rails, Lights, Skidded.
With internal jetting system, 3 dump gates,

FIVE STAR 6”x8”x14” Centrifugal Mixing Pump S/N 5269,
p/b BALDOR 75 Hp. Electric Motor.

FIVE STAR 6”x8”x14” Centrifugal Mixing Pump S/N 5283,
p/b BALDOR 75 Hp. Electric Motor.

SHALE SHAKER, Fluid Systems Inc., Single Screen,
Linear Motion Shale Shaker S/N2450,

SHALE SHAKER, Fluid Systems Inc., Single Screen,
Linear Motion Shale Shaker S/N3089,

NOI DSN-ZH-10CTX Desander S/N 8714-5732,w/ (2) 10” Cones.

NOI DSL-10GG-4CTX Desilter S/N 8714-5731,w/ (10)4” Cones.

DRILCO “Deep Pit” Degasser p/b TECO 10 Hp. Electric Motor

Bubble Buster: Geothermal Type Bubble Buster

Mud House
DRILLMASTER 9’ 1 1”W x 26’L Mud House w/Mud Hopper, Test Sink,
Ventilation Fan, Electric Heater, Lights, Double Side Door, (2) End Doors, Skidded.
Includes 7’H Tri-Stand on one end the other end sets on suction tank.

Fuel Tank
DRILLMASTER 7’1 1”Wx8’Hx30’L, 13,860 Gallon Fuel Tank
w/ (2) AMT 1/2 Hp. Fuel Transfer Pumps p/b BALDOR 1/2 Hp. Electric Motors,
with Three (3)Compartment, Combo Lubester Oilfield Skidded.

Water Tank
DRILLMASTER 10’10”W x 8’1”H x 35’L, 529 Bbl. Water Tank
w/ 10’L Covered Extension, Pump Room, OilField Skidded
FIVE STAR 3”x4”x1 1” Centrifugal Water Pump
S/N 5420, p/b TECO 20 Hp. Electric Motor.
FIVE STAR 3”x4”x1 1” Centrifugal Water Pump
S/N5267, p/b TECO 20 Hp. Electric Motor.

Instrumentation
Weight Indicator
Mud Gauges.

Ancillary Equipment
DRILLMASTER 5’W x 2’4”H x 60’L, 2-Section Catwalk w/ Steel Deck and stands for string blocks.
Pipe Racks 5 Sets 29” x 30’ 1 set 29” x 12’ 1 set 41” x 30’
FIVE STAR “Retriever” Electric Measuring Device S/N 862, w/ 15,000 Ft. of. 092 Wire line
2 sets drill pipe elevators 5”
2 sets of drill pipe slips 5”
2 sets of drill collar slips 7” & 9”
2 sets tongs with all head for pipe & casing
2 sets of safety clamps
Mud box with 5” rubbers
108” X 4” elevator bails
Crossover, bottom hole, lifting Subs
Air Hoist Air Wrench, Model HUL40, S/N-REM10370, 9000 lb. Pull Rating
Air Hoist Air Wrench, Model KSUL, S/N-REM13962, 10,500 lb. Pull Rating
4,000 Ft. of 1-1/4” Drill Line, Mounted Spooler Stand
3-1/2” X 5,000 Psi. Rotary Hose
Vibrator Hose 2 Each 3 ½” x 18’
Rat hole
Mouse hole
8 rig matting boards
Small hand tools & wrenches
Fluorescent & Mercury-Vapor Rig Lights & Wiring Explosion proof
Atco Office/ living shack all electric w/ oil field skid

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) -
Superior 1000 Mechanical Drilling Rig for Sale
2006 Built Superior Drilling Rig for Sale
1000hp Superior Drilling Rig for Sale
Superior 1000 M Drilling Rig for Sale in USA
Mechanical Drilling Rig for Sale in USA
---------------------------------------------------------------------------------------------------------

Superior 1000M Drilling Rig for Sale

ID 1918

Worldoils Marketplace

Worldrigs ID: WR1446

MAC Mechanical Drilling Rig for Sale
450 hp Drilling Rig for Sale in USA

Description

Drawworks :
Mac 400 with hydromatic (water) brake, catheads, powered by a Caterpillar 3408 rated
at 450 HP with air clutch and torque converter

Mast :
P-J Services, 98’ free standing derrick, 280,000#, angle iron steel beams, scopes
with king pin and two axle dolly. Racking capacity of 8500’ of 4 ½” drill pipe

Substructure :
One piece, I beam box type. 8’H x 15’W x 34’L with 4’ fold down wings, enclosed parts house
and large volume tank with Quincy 350 air compressor driven by electric motor in substructure.

Rotary Table :
Brewster 17 ½”, rotary bushing-square, 4 ½” square Kelly

Block/Hook :
Three sheaves (6 lines) grooved for 1 1/8” line

Swivel :
TSM 150 ton with new wash pipe and packing

Generator :
125 KW powered by Detroit 6-71 in steel house with all switchgear and transformer.
Steel house includes parts cabinets, work area, and storage

Mud Pump :
Gardner Denver FXN 7 ½” x 14’ duplex powered by a Cat 3408 (450 HP) with air clutch

Mud System :
Single cone desander, Mission Magnum mud mixing pump, mud stirring guns
(rig uses earthen pits)

BOP :
Regan 10” annular (new annular rubber)

Top Dog House :
Scopes down into 400 barrel water tank, heater lockers, knowledge box

Drill String :
200 joints 4 ½” x-hole, 16.60 ppf drill pipe, yellow band, 12 assorted subs,
lower Kelly valve, inside BOP

Ancillary Equipment :
Kelly hose (new), vibrator hoses (3), 2500’ of 1 1/8” drill line (new), mouse hole, mouse
hole driller, weight indicator, tong torque gage, bear automatic driller, one pen drill recorder,
Sure Shot deviation instrument, mud gages, (3) sets pipe racks, Type C rotary tongs, rig lights
(derrick, sub, mud pump, gen house), drill collar slips, (2) sets drill pipe slips, Quincy 325
air compressor with electric motor, slick line wire line unit mounted on single axle trailer.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------------
Search words (for official use only)
Mechanical Drilling Rig for Sale in USA
MAC 400 Drilling Rig for Sale in USA
8500 Drilling Capacity Land Rig in USA
Mechanical Drill Rig 400hp for Sale
MAC - 8500 Drilling Capacity Oil Rig for Sale
450hp Land Drilling Rig for Sale
----------------------------------------------------------------------------------------------

MAC 400 - Mechanical Drilling Rig 450 hp for Sale

ID 1446

Worldoils Marketplace

Worldrigs ID: WR191

U-36 AE Diesel Electric Rig for Sale
700hp Diesel Electric Rig for Sale
U-36 AE Diesel Electric Rig - 700hp

Specifications
Drawworks :
Mid-Continent U-36 AE Diesel Electric 700hp, S/D drawworks, Lebus
grooved F/1-1/8” line, air drillers console, 22” hydromatic brake, hyd.
Tank with hyd. pump P/B 2hp electric motor, P/B GE 752 traction
motor, with blower, 1000hp, all mounted covered skid with fluorescent
lights, ruffneck heater, master skidded.

Mast :
Parco 131’H x 178’8” W Cantilever mast, 360,000# SHL, pin-type,
crown block, with (5) 36” sheaves, 46” fastline sheave, 1-1/8” line,
4” standpipe, crown safety platform, racking board, tong counter
weights, ladder derrick climber, mast stand, fluorescent lights.

Sub:
Parco 22’H x 25’W x 35’L self-elevating substructure, self-skidded,
rotary beams, stairs, safety rails, deadline anchor, skidded with
V-door, 42”H x 5’W x 32’L, 2-section catwalk with steel deck.

Top Drillers House :
10' H X 8' W X 20' L RD top doghouse with 3’L porch, knowledge box,
lockers, lights, bench and cabinet storage, remote closing unit, skidded.

SCR House :
Baylor model SE-33-BA-301, 3-Bay SCR drive system, S/N 1001-61054,
600 VAC, 60HZ input, multiple controlled DC outputs AT0-750 VDC, Allen
Bradley switch gear & Baylor instrumentation, (2) Marcus transformers,
(1) 600-400 volts, (1) 460-208 volts, MTD IN 10’H x 10’6”W x 20’L house,
Lennox T-Class heat/air unit, emergency lights, skidded.

Generator :
Caterpillar 600KW generator P/B CAT 3412 diesel engine, S/N 81Z0127,
electric start, radiator, gauges, skidded BBC 715 700KW generator set,
P/B CAT 3412 880hp diesel engine S/N S/N 38S2V356, air start, radiator,
gauges, skidded. All above MTD IN 10’W x 36’L generator house,
fluorescent lights, day tank, skidded.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------
Search words(for official use only) :
U-36 AE Diesel Electric Rig - 700hp for Sale
700hp Diesel Electric Rig - U-36 AE for Sale
U-36 AE Diesel Electric Rig
Land Rig for Sale
Diesel Electric Rig - 700hp - for Sale
-------------------------------------------------------------------------------------

Diesel Electric Rig - U-36 AE for Sale

ID 191

Worldoils Marketplace

Worldrigs ID: WR214

Workover Rig For Sale
750hp Workover Rig - LCI 750

Technical Specification

Drilling Rig Package

LCI-750 Double Drum Drilling Rig with mast hook load capacity 365,000 lbs,

powered with two Caterpillar C-15 diesel engines with two new Allison S6610

transmissions with torque converter. Mast is 114 ft (35.76m), 365,000 lbs API

capacity. Drawworks is 1000hp capacity. All equipment is mounted on a 700

series Seven-axle carrier. Rig equipped with a telescoping substructure 17 FT

6IN ( 5.3 m) height.

Group I. Basic rig

Section 1.0 : Carrier

Heavy Duty Prime Mover 7 Axle Carrier :
• 7-axle heavy-duty Carrier suspension shall be a 7-axle with

100Klb total capacity. All lights and brakes are equipped for

attachment to the truck. All axles have spring brake

chambers for safety.

Tires (16 - 16 : 00 X 20, 14 Ply) :

• All tires, disc wheels, fourteen 16:00 x 20, all terrain tread.

Tire rating 52,000psi (23.5 t/cm2) total, all tires inflated to

100psi. Two spares included with rig.

100-Gallon Fuel Tank – (Two) :

• Two 100-gallon (416 L) fuel tank, side mounted on

carrier frame. Tanks are connected for equalization.

Tool Box :

• One tool storage box of steel plate construction,

reinforced doors with chain stops. Doors have

lockable hasps.

Eight (8) Platforms With Handrails - Operator Side & Off-Operator Side
• Eight-platforms, hinged along operator’s and off-operator’s

side of unit at bed level, running continuously from operator’s

position to cab of unit. Each platform is approximately 6’

(1.8 m) long x 2’ (0.6 m) wide. Handrails attached to

platforms on operator and off-operator’s side of rig. Includes

stair with handrails from platform to ground.

Deadline Anchor :

• Hercules 129 HA 129 deadline anchor to be used with

compression type weight sensor. Drum type, mounted on

carrier frame in front of drawworks frame.

Four Pedestals For Hydraulic Jacks :

• Pedestals under front jacks for rig stability. Four pedestals

required. There will be six jacks for leveling the rig.

50 GPM (189 LPM) Hydraulic System :

• System is designed to operate at a maximum of 2Kpsi (140.6

Kg/sq. cm) with 50 GPM (189 LPM) at 2,100psi.

• Hydraulic pump driven from PTO on transmission. Air

Activated clutch for pump engagement and disengagement.

• 325-gallon (1230 L) hydraulic oil tank including installation,

Filler cap, breather and combination oil level, and oil

Temperature gauge.

Six (6) Hydraulic Jackscrews :

• Six hydraulic leveling jacks, two mounted in rear bumper,

two mounted mid point of rig to remove weight of rig from

axles and to provide greater lateral stability, and two

mounted behind the front axle. Each jack has an adjustable

support screw with locking nut feature.

Tong Circuit :

• Tong hydraulic circuit is designed to operate up to 50 GPM-

2000psi (189 LPM-140.6 kg/sq. cm) at 2,100-RPM

intermittent duty. Includes connectors, pressure, and return

lines, pressure gauge, directional flow valve, and pressure

• regulating valve. (Does not include tongs.)

Handling Winch (One) :
• Hydraulic powered planetary winch 8Klb (3.6 t) line pull,

rated at 100 ft minute (30 m) at 50 GPM and 2Kpsi at 110

RPM.

• Ratings are for first wrap on drum.

• 325 feet (99 m) of 1/2” line provided with winch. (Fail-safe

brake, winch pull-in and run-out is hydraulically powered.)

• Winch sheaves provided in crown.

• Winch controls are located at rear of unit near operator’s

console.

• Cage to be installed around the winch for protection.

Section 1.1 : Engine/Transmission Engine Assembly (Two) :
• Diesel engine Caterpillar C 15 four stroke cycle,

6 cylinders turbocharged, after cooled diesel engine with

rating of 540 hp at 2100 rpm. Equipped with limiting speed

governor, air throttle actuator, lube and fuel filters, alternator

and flywheel housing. High ambient radiators and suction

fan, permanent type anti-freeze, single exhaust with spark

arrested diverted to off-operator’s side with muffler. Engine

oil pressure, amp, and water temperature gauges are
included. Engine kill valve located at operator's position.

Electric start. Tru-flow 1000 or equal air compressors will be

used. Both engines can run at one time, or one engine can

be used alone for rig operation. The operator side engine is

set up to run the rig down the road, normally. Both engines

are set up with hydraulic pumps for power to the hydraulic

system. All air and pressure gauges will carry the vender

certs.

Transmission Allison (Two) :

• Allison S 6061 RB model six-speed transmission (five

forward, one reverse) with converter and oil cooler. Air over

hydraulic dual controls, with air Iine indicator. Power shift

from cab and from rear control.

Section 1.2 : Drawworks- LCI-1000hp Model
Single Drum Model 42 X 12
• Model 4212 Main Drum Winch Assembly :
• Full air, Fawick ” clutch outside drawworks frame. Brakes

are 42” (106.7 cm) diameter x 12” (30.5 cm) wide, lined with

1 in (2.5 cm) x 12” (30.5 cm) x 12” (30.5 cm) API drilled

brake blocks, full wrap dead-end equalized. Brake rims are

removable with rings for splash water-cooling. Brake

operation shafts are mounted on ball bearings; these are self

energized type for positive application and release by

operator. Drum barrel is 18” (45.7 cm) diameter x 38” (96.5

cm) long, mounted on double row self-aligning spherical

roller bearings on a 6 ½” (16.5 cm) drum shaft. Clutch single

line pull is 42,500lb on bare drum and in first gear.

Lubrication :
• Centralized lubrication system to all bearings and brake

linkage on drawworks is located outside frame.

Brake Water Cooling :

• Includes water circulation of the water system with air and

water piping from reservoir to main drum water circulation

brake rims. Water source is from external source, with pump

(25-gpm). A warning lite will be installed for high temp.

Drawworks Drive :

• Consists of:

• ASA-100-3 (1 ¼”) pitch, Triple strand, roller chain

• Chain drive from input sprocket-to-sprocket on jackshaft

• ASA-100-3 (1 ¼”) pitch, Triple strand, roller chain as final

drive to main drum.

Grooved Jacket : Main Drum-1 1/8” :

• Lebus counter balanced sleeve is grooved for 1” 1/8

wireline, to assist spooling, and reduce line wear.

Lebus to be certified by vender.

Hydrotarder :
• Parmac 202 Hydrodynamic Brake assembly with dual rotary.

• Fawick 28VC 1000 air clutch, gates, inlet air valve, piping.

• 325-gallon (1230 L) water tank, lines, valves, and plumbing

installed on rig.

• Driven from the main drum thru triple-strand 1 ¼” pitch drive

chain

Combined Gear Box :

• Cushman model 279 combined gear box consisting of right

angle gear box and drop box. Right angle gear box ratio is

1:1 to drive single drum drawworks. Drop box to transfer the

torque from final shaft to rotary. Pressurized lubrication

system.

Rotary Drive : Application included

• Is provided in the right angle drop box, for a power

connetion. The drive can be installed at a later date if

required. It will include the rotary drive shaft to rear chain

case at the rear of the rig.

Sandline Drum 42X 8

Sandline drum with 42x 8 brake size, for handling 16,500 feet

of 9/16 wire line on the drum . Brakes are removalable for water splash

cooling on the brake rims. Single line pull is 26,000 lbs on the drum.

Elevated Chain Rotary Drive (Double Chain) :

• Elevated chain drive is oil bath type consisting of drive

sprocket at bottom of case with ASA 140 –2 (1 ¾”) pitch

double

Section 1.3 : Mast

114’ Mast :

• 114’ (33.5 m) clear working height with an API rated static hook load of:

• 330Klb with 8 lines strung.

• 365Klb with 10 lines strung.

• Mast is designed to withstand a wind of 69-mph from any

direction provided the four jacks on the vehicle are properly

deployed and the mast is properly guyed. Telescoping twin

box structural mast is designed and constructed to API

standards.

• Two-section construction with the upper section telescoping

into the lower section for over-the-road position - Top section

of mast automatically latches to lower section, when

extended.

• Lock control at base of mast

• Ladder to crows nest on crown

• The mast is attached to its support frame at the pivot point

near the rig’s rear bumper. It is supported during roading by

a rest (headache frame) near the front of the rig. Each leg of

the lower section contains an adjustable support screw.

• Mast has large girts and braces that do not extend inside, for

extra block clearance.

• Mast includes: installation, front rest and two internal load

lines to rig from crown and two form top of lower section,

with tail chains and tightening boomers, All cabling, chains,

clamps, pin locations, turnbuckles and attaching devices will

carry the vender certs, with load cap, and certs.

• 4” x 5,000 Lb standpipes, all welded, 1502 unions

Crown :

• Bender Crown arrangement for 8 or 10 line string-up with

conventional block shall hang flat with mast:

• One-36” (91.4 cm) diameter fastline sheave, grooved 1 1/8”

(2.8 cm)

• One-36” (76 cm) diameter deadline sheave, grooved 1 1/8”

(2.8 cm)

• Three-30” (76 cm) diameter sheave cross-mounted, grooved

1 1/8” (2.8 cm)

• Two-Catline sheaves

• Crown sheaves are steel with flame-hardened grooves.

• Sheaves are mounted on Timken tapered roller bearings. All

crown sheaves will carry the vender certs, for approval.

• Fittings provided for individual greasing of bearings.

• Crows nest (crown platform) provided for safety when

servicing crown sheaves, floor of expanded metal, handrails

and toe boards around crown with entrance at ladder.

• Attachment for four wind guylines from crown to ground is

provided on crown beams.

Tubing Board :

• Tubing board, of all welded construction, is automatically

lowered into working position as mast is telescoped up and

is raised into folded position as mast is telescoped down for

transits.

• Tubing board fingers are for 17,000 ft (5182 m) of 2 7/8” (7.3

cm) or 11,400 ft (3475 m) of 3 ½” (9 cm) tubing.

• Tubing board mounted at 55 ft (16.8 m) above setback for

racking doubles.

• 2’ 6” (.6 m, 15.2 cm) wide monkey board/walkway included.

• Handrails around tubing board for safety.

• Man safety attaching post is installed on each side of the

tubing board, and at the center in the rear of the board to

attach safety line and escape line to.

Raising, Lowering And Telescoping :

• Mast is hydraulically raised and scoped by hydraulic

cylinders, and unlocking upper section from lower section

and extending until the spring-loaded latches snap into

operating position extends upper section.

• Mast is retracted in like manner. When latches clear the

latch seats, a control line is pulled to retract latches, and

mast shall lower to its stacked position with section re-locked

together, mast is lowered to headrest.

• Locking pins shall be painted orange.

Mast Controls :

• Raising, lowering and telescoping controls are installed at

operator’s position near base section of mast, which are

unlatched and moved at time of raising or lowering the mast.

Weight Indicator :

• Weight indicator complete with sensor, 10” dial indicator, box

mount and 25 ft. hose assembly. This is to be calibrated in

daN, as well as lbs. It will carry the vender certs.

Crown Saver Installation :

• Load and crown block saver installed on drawworks.

• Automatically disengages clutch and sets main drum brakes

when block comes too close to crown.

Group II : Substructure
Section 2.0 : Substructure
Hydraulic Telescoping Substucture :

• Working floor height of 17.5 ft (5.3m) with 14' ft- in clear

under rotary beams.

• 4.5 (14.7 “) are the maximum height when scoped down for

transportation.

• 10ft 6in maximum width when scoped down for

transportation.

• Capacity of 365,000 lb (160 mt) on rotary beams and

225,000 lb (100 mt) on setback.

• Substructure base shall be 20' (6.2m) by 10 ft 6 in wide with

an elevated floor 18ft.(5.48) wide x 18 ft (5.48 m) long. Floor

area is 18 by 18 full workspace, with folding wings on each

side to be 4ft per side when folded out.. Floor and fold down

walkway to be plated with diamond floor plate. Work floor to

be equipped with removable handrails with toe plate (150

mm).

• One stairway from substructure work floor (operator

platform) to carrier folding walkway and one stairway from

substructure floor to ground.

• Substructure to be equipped with pipe ramp with steel plate

complete with stairway from substructure floor to catwalk.

• Setback to be covered with 3 in (7.6 cm) thick oak timbers.

• Provide two tong back up post.

• Provision for rat hole and mouse hole.

• The BOP handling system includes two (2) crane rails

integrally mounted under the drill floor. Each rail is rated for

5 tons capacity.

Catwalk Assembly :

• Catwalk assembly 4'-0" wide x 45' long x 3'-6" high (1219

mm x13.7 m x 1066 mm) with built-in stair.

Carrier Ramp :

• One Carrier Ramp 10 ft (3 m) wide x 18 in (45 cm) high x 55

ft (16.8 cm) long. The ramps are to include tire guide rails

and are to be plated top and bottom with steel plate. The

carrier ramp includes a mast base support section with jack

• Substructure and rig ramp to be provided with all necessary

pins, jackscrews, turnbuckles, lugs, and associated

equipment required for connection of substructure and rig

ramp with the rig.

• Ramp to have hinged section approximately 15 ft (4.6 m)

front end to fold ramp for transportation.

Section 2.1 : Hydraulic Catworks - Make-Up And Break-Out :

• Hydraulic breakout cylinder has 6 ft (1.8 m) stroke with

20,000 lb (9027 kg) maximum line pull.

• Hydraulic make-up (spinning) cylinder has 6 ft (1.8 m) stroke

with 20,000 lb

• (9027 kg) maximum line pull. Cylinder mounted in mast

section. Includes wireline, turn back sheaves and plumbing

to rig hydraulic system.

• Both cylinders are Controls are located at operator position

Group III : Additional Equipment :
Section 3.0 : Handling Winch
• Rig comes equipped with one winch. Additional hydraulic

planetary winch 8000 lb. capacity. Winch will have a wire

cage for protection around the winch; the control for the

winch is remote, by air.

Section 4.0 : V-Door Ramp And Pipe Racks
• One (1) each 48 in. x 3ft-6in. x 45 ft. Catwalk from the rig

floor level to the 36 in. high catwalks

• Two (2) ea.. x 36 in. x 28 ft. long pipe racks

Section 5.0 : Rotary Table 22”
• One 22” rotary table, 44” centers complete with split

square solid steel master bushing, spiral bevel gears,

precision bearings throughout, removable box cover with

lifting eyes, positive pinion shaft lock and centralized lube

system.

Section 6.0 : Upper Chain Case Assembly : Included
Section 7.0 : High Pressure Piping
• One 4 in 5000psi high pressure mud line and a manifold for

gage and kill line. The mud line will be welded with a 1502

union.

Section 8.0 : Rig Additions
Section 8.1 : Crown-O-Matic
• combo crown and dwks type Crown-O-Matic for saving

mast failures is installed on the drawworks, and is set for

locking the brakes down.

Section 8.2 : Safety Climbing Device

• The safety climber is attached to the mast with cable and

belt.

Section 8.3 : Geronimo Chair.cost included in climber

• Safety chair and T-bar type seat is complete with brake

device.

Section 8.4 : Mast Guylines

• Four 5/8” wire rope cables to the ground from the mast

crown, two additional from the mid section, and two more

from the tubing board to the ground are required. . All cable,

hooks, shackles will be certified from the vender with rating.

All crown lugs will be stamped and certified.

Section 8.5 : Block-Hook

• – 5 sheave x 1 1/8” sheave 200 ton block with hook, The

block will be shipped here to be used for the pull test at the

factory.

Section 8.7 : Wire Rope

• Drill line 1 1/8”diameter X 1,640 feet, certs will be provided

for all drill line, and cabling for the rig.

Section 8.8 : Dead Line Anchor - Indicator Assy…

Anchor for 1.125 diameter wire rope, for mast pull of

365,000lbs for 10 line string up on the crown of the mast. The anchor will be

certified by the vender .

Group IV. Fabrication, Rig Up And Test (Work to be done at cost plus)
Section 9.0 : Rig-Up and Test :

Rig Up - Test - Rig Down to consist of following:

• Furnished rig and structural.

• Level site and accurately mark machinery location to well

center per approved rig layout. Furnish temporary timber

mats (if required) for mounting mast base, pumps, tanks and

houses.

• Set the mast, and assemble drilling substructure. Set stairs,

pipe ramp and handrails. String drilling line to crown and

traveling block.

• Set and align rotary table. Furnish and install alignment

blocks and tie downs.

• High-pressure mud discharge piping. Piping and assembly

quoted as a separate item in this quotation

• Raise mast to vertical and operate traveling equipment.

• Rig down and load out. Disassemble rig and load on truck.

Group V Commissioning And Training :

• 2 Days commissioning and training by Qualified LCI Rig

Engineer included in bid.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------
Search words(for official use only) :
Workover Rig For Sale
750hp Workover Rig - LCI 750
LCI 750 - Workover Rig for sale
------------------------------------------------------------------------

Workover Rig - LCI 750 - For Sale

ID 214

Worldoils Marketplace

Worldrigs ID: WR268

Speedstar 275 Quickdrill Drilling Rig For Sale
Used Drilling Rig 1986 Built for Sale

Model : 275 Quickdrill Rig
Manufacturer : Speedstar
Year : 1986
Condition : Used

Description :

1986 Speedstar 275 Quickdrill Rig
4X3X13 Centrifugal Mud Pump
Leroi compressor 50SDS (rebuilt in 2000)
Main Winch & Sandline
Single Rod Loader
Rod Rack
(16) 2-3/8" IF x 15' ft drill pipe and 6" inch stabilizer
Mud pan and suction line
4 hydraulic leveling jacks
Mounted on a newer 1992 GMC Topkick Truck
CAT Diesel Engine
10 Speed Transmission
4 newer rear tires
203000 miles

Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

--------------------------------------------------------------------------------------
Search words(for official use only) -
Speedstar 275 Quickdrill Rig for sale
Drilling Rig - Speedstar 275 Quickdrill
Used Drilling Rig for sale
Speedstar 275 Quickdrill Drilling Rig for Sale in USA
1986 Built Speedstar 275 Quickdrill
------------------------------------------------------------------------------------------------------------

Speedstar 275 Quickdrill Rig for Sale

ID 268

Worldoils Marketplace

Worldrigs ID: WR488

Drilling Rig - Speedstar SS-15 II For Sale
Speedstar SS-15 II Drilling Rig 1977 Built for sale

Model : SS-15 Drill Rig
Manufacturer : Speedstar
Year : 1977
Condition : Used

Description :
1977 Speedstar SS-15 II Drill Rig
Mounted on a 1977 GMC Truck
13 Speed transmission
Rig Serial #: 7154
4 1/4" Kelly
18 GPM John Bean water injection system
Double Drum Drawworks with air clutches
Sandreel
Table Drive
750 cfm / 300 psi Sullair air compressor/low hours installed prior to purchase in 2002
C60 Engine, Easy start, runs great, burns no oil
Table Drive, 8 1/2" opening, hydrostatically driven
Air Controls
Easy load, Rod tray with 17 pieces of 3-1/2" API x 4-1/2" OD x 20' Rods (340')
in rack + 25 foot Kelly Bar/365' ft total

Line oiler, electric/air
4 hydraulic leveling Jacks
35' mast height above table
Safety Shut Down
Machine runs exceptionally well
6" Bit basket
10" Bit basket
Pipe rollers
Drill Rod Clamps
Chain Wrench
260' ft of additional drill rod available at an extra cost

Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------------------------------
Search words(for official use only) -
Speedstar SS-15 II Drilling Rig For Sale
Drilling Rig Speedstar SS-15 II 1977 Built for sale
Used Drilling Rig Speedstar SS-15 II for sale
Used Speedstar SS-15 II Drilling Rig for sale in USA
Land Drilling Rig For Sale
1977 Built Speedstar SS-15 II Drilling Rig for sale
-----------------------------------------------------------------------------------------------------------------------------------------

Speedstar SS-15 II Drill Rig for Sale

ID 488

Worldoils Marketplace

Worldrigs ID: WR1910

Crown Duke CE 750 SD Drill Rig for Sale
2008 Built Crown Duke Drill Rig for Sale

Model No : CE 750 SD Drill Rig
Manufacturer : Crown Duke
Model Year : 2008
Condition : Used

Description

2008 Crown Duke CE 750 SD Drill Rig
powered by a Detroit Series 60 14 Liter Diesel Engines
Allison 6610 Automatic Transmission.
118′ x 350,000 Lb Capacity Double Telescoping Mast
630 BBL Twin Tank Mud System
27 1/2″ Salem & FDS Rotary Table
(2) 1000 HP Triplex Mud Pumps

450 kW Generator House
Skidded Drive-On Platform
Keep reading for more detailed information.
Draw Works: Single Drum
Engine Specs: Detroit Series 60 14 Liter Diesel
Est. Max Depth: 10,000 ft
Fuel Type: Diesel
Horsepower: 665
Mast or Derrick: 118 ft x 350,000 Lb Capacity, Double Telescoping
Mounted On: Carrier
LISTED SEPARATELY: Mud Pumps (2) 1000 HP Triplex Pumps,
P/B CAT 3508 1000 HP
Rotary Table: 27 1/2" Salem & FDS

Title: Yes
Transmission: Allison 6610 Automatic Transmission
VIN: 1C9ST184982978004
630 BBL Twin Tank Mud System
(1) Generator House; 450 KW Generator, P/b Detroit Series 60 14 Liter Diesel Engine
(1) Hydraulic Raised Substructure; 14 " High x 10' Wide x 18' Long
(1) Top Doghouse with Storage and Hand Tools
(1) Bottom House with Lockers, Lubester, and Circulating Pumps
(1) Fuel Tank - 8,000 Gallon Capacity with Pump, Double-walled
(1) Water Tank - 300 BBL Capacity with Wash Pump, Mud Line, Valves and Manifold
(1) Center Wall - 54′ Long
(1) Skid with Suitcase and Ladders
(1) Skid with Junk Box, Rotary Tongs, and Rathole Diggers
(1) Pipe Tub with Blow Line and Pipe Racks
(1) National 175 Ton Block Hook
Various Matting Boards for Rig Support
Rotary Hose and Drill Line
Mounted on 6 Axle Carrier
v-Door and Cat Walk
8,000 Gallon Fuel Tank

Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

--------------------------------------------------------------------------------------------
Search words (for official use only) -
Crown Duke CE 750 SD Drill Rig for Sale
2008 Built Crown Duke Drill Rig for Sale
Used Drilling Rig for Sale in USA
Crown Duke CE 750 SD Used Drill Rig for Sale
Used Drill Rig - 2008 Built - for Sale
Crown Duke CE 750 SD Drill Rig for Sale in USA
--------------------------------------------------------------------------------------------

Crown Duke CE 750 SD Drill Rig for Sale

ID 1910

Worldoils Marketplace

Worldrigs ID: WR1449

Mobile B80 Drill Rig for Sale
1991 built Used Mobile B80 Drill Rig for Sale

Model : B80 Drill Rig
Manufacturer : Mobile
Year : 1991
Condition : Used

Description :

1991 Mobile B80 Drill Rig
Mounted on 1992 Ford LT-9000 Truck 6x4
Rebuilt CAT 3406B Diesel Engine
23,000 Miles
SAFE-T-DRIVER
Main & Auxiliary hoist
Sullair 750 cfm / 150 psi Screw Air Compressor
PTO with 3 stage hydraulic pump
breakout wrench
2” NPT air/water swivel
front & rear stabilizer jacks
Moyno 3L4 water pump 225 psi/17 gpm Tarby water pump (Both pumps need work)
Tooling also included:
105’' of (4-1/2 x 15')’ Reg pin x box drill rods with flats
6"”, 8"” and 10"” bits
Hammer
140 lb slide hammer
70’ 1-¾”" AWJ rod
(2) AWJ 2” x 24” split spoon samplers

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Mobile B80 Drill Rig for Sale
1991 built Used Mobile B80 Drill Rig for Sale
Used Drilling Rig for sale
Mobile B80 Drill Rig 1991 Built for sale
Mobile Drilling Rig for sale
----------------------------------------------------------------------------------------------------------------

Mobile B80 Drill Rig for Sale

ID 1449

1976 Speedstar SS-22 - Cummins Powered Drilling Rig for Sale

Worldoils Marketplace

Worldrigs ID: WR2456

Speedstar SS-22 - Cummins Powered Drill Rig for Sale
1976 Built Speedstar SS-22 Drill Rig for Sale

Description :

1976 Speedstar SS-22 - Cummins Powered
Double Drum Drawworks 100,000 Hook load USA

1976 Speedstar SS-22-SN: 30268 is a three-axel carrier mounted drill rig
having a side-by-side double drum draw works. Each drum is rated at
18,000# SLP. Owner reports the mast is appox. 50' tall with a 100,000# hook load.

Rig mounted on a crane carrier chassis with Cummins motor

2" Speedstar swivel

8.5" Speedstar rotary table

256 Leroi air compressor

Driller's platform, and derrick board.

Gardner Denver 5-1/2 x 8 mud pump, 3" water course

Shop built 20' gooseneck pipe trailer with pipe slide.

Shop built 20' gooseneck tool house trailer with insulted dry van box

Drill pipe:- 800 ft. of used drill pipe, consisting of:
1.) 500 ft. of used drill pipe (2-3/8" tool joints);
2.) 300 ft. of 2-7/8" bottleneck drill pipe (2 3/8" tool joints).

Tooling : drill pipe slip; drill pipe hoist plug and sling;

8-5/8" casing swedge; 4-1/2" casing swedge;

(2) 4-1/2" elevators; bit subs;

11.0" PDC bit.

6.75" PDC bit

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us anemail to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------
Search Words (for official use only) :
Speedstar SS-22 - Cummins Powered Drill Rig for Sale
1976 Built Speedstar SS-22 Drill Rig for Sale
Speedstar Land Drilling Rig in USA
Used Speedstar SS-22 Drill rig
Speedstar Cummins Powered Used Drill Rig in USA
---------------------------------------------------------------------------------------------------

1976 Speedstar SS-22 - Cummins Powered Drilling Rig for Sale

ID 2456

Worldoils Marketplace

Worldrigs ID: WR1389

Schramm T64HB Drill Rig For Sale
Schramm Used Land Drilling Rig For Sale in USA

Model : T64HB Drill Rig
Manufacturer : Schramm
Condition : Used

Description :

Schramm T64HB Drill Rig - Serial Number: T64HB-1313
425 cfm / 250 psi Air Compressor
Detroit 8V71N Diesel Deck Engine
Pipe Rack
3 hydraulic leveling jacks
Mounted on a GMC truck - VIN TJV738V578079
diesel engine

Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words(for official use only) :
Schramm T64HB Drill Rig for Sale in USA
Schramm Land Drilling Rig
Used Schramm T64HB Drill Rig
Schramm T64HB Used Drill Rig for Sale
Schramm T64HB Drill Rig For Sale
---------------------------------------------------------------------------------------------------------

Schramm T64HB Drill Rig - for Sale

ID 1389

Featured equipments for sale

Worldoils Marketplace

Parallelogram Style Land Drilling Rig for Sale

ID 2565

Worldoils Marketplace

2013 Built Carrier Mounted Telescopic Mast for Sale

ID 2566

Worldoils Marketplace

1000Hp Parallelogram Style - Telescopic Mast Double Rig

ID 2567

Worldoils Marketplace

1000Hp Parallelogram Style - Telescopic Mast, Double Rig

ID 2568

Worldoils Marketplace

2013 Built Carrier Mounted Telescopic Mast for Sale

ID 2569

Workover Rig For Sale - BW Rig Alco Double (4200m) - Used

Worldoils Marketplace

Worldrigs ID: WR632

BW Rig Alco Double Used Workover Rig for Sale
Used American Workover Rigs for sale
Workover Rig For Sale - BW Rig Alco Double (4200m)

BW Rig Alco Double
Five axle, self-propelled, double drum, back in rig
4200 m x 73 mm tubing
12.7 liter 60 series Detroit Diesel rated at 425 hp engine
Allison CLBT-5860 Five speed transmission
25.4 cm x 106.7 cm main drum brakes
c/w 60.9 cm model 124 Eaton brakes
20.3 cm x 106.7 cm sand line brakes
31.7 m Cheyenne Model 104 mast w/106,800 DaN and 8 lines
4200 m x 73 mm tubing and 3000 m sucker rods
Sowa 100 ton model 9944 travel blocks
Fluorescent lighting
1” drilling line
4200 m x 12.7 mm swedge sand line
Hydraulic weight indicator
Dual winches

Combination
11.0 m X 3.4 m skid change house
6.6 m X 3.36 m tool-house accumulator portion
John Deere 55 KW generator

Handling Equipment
58-93R Foster tubing tongs
Cavins TC 101 air slips
2 - BJ and 1 – AOT elevators
60.3 mm, 73 mm & 88.9 mm standard tubing sizes
5/8” and 1” rod sizes
2 – 8 x 42 and 2 – 6 x 16 rig mats
Skid cat walk & 4 tumble racks

Safety Equipment
4 - 18 KG fire extinguishers
4 – Scott SCBA self-contained breathing apparatuses
Industrial Scientific LTX312gas detector
Safety and directional signs
Electrical Ground Bonding Equipment
Stretcher
Crown Saver
60.3 mm, 73 mm & 88.9 mm pipe ram
2 self-retracting life lines

BOP Equipment
Class III
Dreco RS, double-gate with a pressure rating of 35 Mpa and Townsend, annular with a pressure rating of 35 Mpa
88 gallons (333 liters) Oilco accumulator w/ 3 control and remote at drillers console
73 mm safety valves with a pressure rating of 35 Mpa
76.2 mm rod BOP
76.2 mm x 6 m swab lubricator c/w tool trap
73 mm gate valve

Pump
Skid pump
10.16 cm x12.7 mm National JWS-300L with a pressure rating of 35 Mpa
Detroit Diesel 8V92, 300 hp engine
5 speed manual transmission
3 x 2 x 13Mission Magnum I charger pump
7 valve manifold with a pressure rating of 35 Mpa

Mud Tank
38 M3 mud tanks c/w mud guns, mixing hopper and settling trough
20 - 5.08 cm X 6 m line pipe and suction hose
Poor boy degasser

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words(for official use only) -
BW Rig Alco Double Used Workover Rig for Sale
Used American Workover Rigs
Workover Rigs in USA
Workover Land Rigs in USA
Land Workover Rigs For Sale
Workover Rig For Sale - BW Rig Alco Double (4200m) - Used
Used Workover Rigs for sale
BW Alco Double Rig - Used For Sale
-------------------------------------------------------------------------------------------------------

BW Rig Alco Double Used Workover Rig - 4200m For Sale

ID 632

Parallelogram Style Drilling Rig for sale

Worldoils Marketplace

2000HP Swing Up Triple Drilling Rig for sale

ID 2561

Worldoils Marketplace

2000HP Swing Up Triple Drilling Rig for sale

ID 2560

Worldoils Marketplace

Soilmec SR50 Drilli Rig For Sale

ID 2558

Worldoils Marketplace

Soilmec SR30 Drilling Rig - For Sale

ID 2559

Nordic Drill DRC-10-A Crawler Drill Rig for Sale

Worldoils Marketplace

Worldrigs ID: WR2557

Nordic Drill DRC-10-A Crawler Drill Rig for Sale
2017 Built Nordic Drill DRC-10-A Crawler Drilling Rig for Sale

Model : DRC-10-A Drill Rig
Manufacturer : Nordic Drill
Year : 2017
Condition : Used

Description :

2017 Nordic Drill DRC-10-A Crawler Drill Rig

Has 2400 Hours since December 2018 & Drilled 96 Wells in 2017
and 92 Wells in 2018 to date.

All in One Drilling Rig with Dual Rotary, Crawler Mounted Carrier,
12" Max Openings & Slide Angle Mast with Advantages Compared to a
Conventional Air Rotary Drill.

Angle Slide Package:
Allows Drilling Applications for Mining, RC (Reverse Circulation)
Exploration, Anchors, Pilling, Geotechnical, Soil Samples, Etc.

Crawler:
Light Weight & Small means less damage to the drilling sites,
allows set up on difficult terrains & tight access sites,
and less preparation for set up and break down.

Dual Rotary:
Allows Accuracy & Performance in Tough Overburden Conditions,
Good Sampling & Screen Intallations, Facilitates The Extraction
of Casing, Easy to Operate & Cleaninesss on Sites.

Safety:
Offers Safe Drilling Methods, Provided of an Anti-Rotation System.

Top Drive:
Stroke: 16 ft
Hoist: 31,000 lbs
Hoist Speed: 53 ft/min
Pull Down: 23,500 lbs
Pull Down Speed: 71 ft/min
Torque: 6,000 ft x lbs
Rotation Speed: 0-90 RPM

Lower Drive:
Stroke: 10 ft
Hoist: 35,000 lbs
Hoist Speed: 47 ft/min
Pull Down: 26,500
Pull Down Speed: 63 ft/min
Torque: 21500 ft x lbs
Rotation Speed: 0-9 RPM
Maximum Opening: 12"
Engine: CAT C 6.6 Diesel @ 210 hp (Tier 3)
Sliding Mast Stroke: 36"
Welding machine: Hydraulic 225 AMP
Water Pump: Quad Bean 18 GPM
Hydrofrac Pump: 26 GPM @ 1800 psi / 13 GPM @ 2900 psi
Service Winch: 2,000 lbs
Front Winch: M12 12,000 lbs
Pipe Tub: 40 Pipes - 3-1/2"
Safety: Anti-Rotation Top Drive
Maxumum Speed: 3,1 MPH
Weight: approx. 37,400 lbs

Aluminum stairs

Nordic Drill DRC-10-A Crawler Drill Rig For Sale

ID 2557

1982 Built Parallelogram Style Drilling Rig

Worldoils Marketplace

Worldrigs ID: WR2554

2000HP Sling Shot, Bi-directional Skidding, Triple Rig for sale
SCR Drilling Rig for Sale
Sling Shot, Bi-directional Skidding, Triple Rig for Sale

General Description

Sling Shot Bi-directional Skidding Triple Drilling Rig for Sale

ID 2554

Worldoils Marketplace

Worldrigs ID: WR2552

Parallelogram Style Swing Lift, Triple Drilling Rig for Sale
Used Swing Lift, Triple, SCR Type Drilling Rig
3000HP Parallelogram Style Land Drilling Rig for sale

General Description

3000HP Swing Lift Triple Drilling Rig for sale

ID 2552

Worldoils Marketplace

Worldrigs ID: WR2551

Drilling Rig - Mast 143ft - For Sale
Sling Shot, Skidding, Triple Drilling Rig - 2009 Built - For Sale
Parallelogram Style Drilling Rig for Sale

General Description

1600HP Sling Shot, Skidding, Triple Drilling Rig for Sale

ID 2551

Worldoils Marketplace

Portadrill 10TG Drill Rig - For Sale

ID 2555

Bauer BG11H Crawler Drilling Rig for Sale

Worldoils Marketplace

Bauer BG11H Crawler Drilling Rig - 2015 Built - For Sale

ID 1203

Worldoils Marketplace

Worldrigs ID: WR2556

Gus Pech Drilling Rigs for Sale

Drilling Rigs - Gus Pech - For Sale

Gus Pech Drilling Rigs - For Sale

ID 2556

Worldoils Marketplace

Carrier Mounted 550HP Telescopic Mast Rig For Sale

ID 2545

Worldoils Marketplace

Worldrigs ID: WR2546

550Hp Platform Style Telescopic Mast Double Drilling Rig
2012 Built Mechanical Drilling Rig

General Description

Carrier Mounted 550HP Telescopic Mast Rig

ID 2546

550Hp Platform Style Telescopic Mast Double Drilling Rig

Worldoils Marketplace

2012 Built Platform Style Telescopic Mast, Double Drilling Rig

ID 2547

Worldoils Marketplace

Used Carrier Mounted Telescopic Mast Drilling Rig

ID 2548

Worldoils Marketplace

Worldrigs ID: WR2549

Platform Style Telescopic Mast Double Drilling Rig

Carrier Mounted Telescopic Mast, Double Drilling Rig
Land Rig for Sale

General Description

Rotary Table

2012 Built Carrier Mounted 550HP Telescopic Mast Rig for Sale

ID 2549

2007 Built Atlas Copco RD20 Range III Drill Rig

Worldoils Marketplace

Atlas Copco RD20 Range III Drilling Rig - For Sale

ID 1047

Worldoils Marketplace

Reedrill SKT Drilling Rig for Sale

ID 1252

Trailer Mounted Rack & Pinion, Super Single Rig

Worldoils Marketplace

850HP Trailer Mounted Rack & Pinion Rig for sale

ID 2542

Ingersoll-Rand TH75W Drill Rig - For Sale

Worldoils Marketplace

Worldrigs ID: WR783

Ingersoll-Rand TH75W Drill Rig - For Sale
Ingersoll-Rand Drilling Rig - 2000 Built for Sale

Model : TH75W Drill Rig
Manufacturer : Ingersoll-Rand
Year : 2000
Condition : Used

Description :

2000 Ingersoll-Rand TH75W Drill Rig
55,000 lbs of Pullback (70,000 # cylinder option)
Four Motor High Torque (8,000 Ft.-Lb. Torque) Tophead Drive
IR 1050 cfm / 350 psi Air Compressor (105 Original Hours on Compressor)
Hydraulically Driven 3"x4" centrifugal pump
Cummins QSK-19 Diesel Deck Engine - rated 600 HP
Mounted on a International 5000 Truck
Cummins N14 500 HP Engine
Fuller 8LL Transmission
20K Front Axle / 46K Rear Axles
7 Rod 4-1/2" X 20ft Drill Pipe Carousel
Deck Engine Diesel Fired Pro Heater
16,000 Lb. Main Winch with Swing and Telescoping Jib Boom - the winch is a Gearmatic that
has enough cable capacity to run a three part line (48,000 lbs.).
Newer deck engine installed recently- 2017
New sandline in 2017

360ft of 4 1/2", 2 7/8" thread, 20ft length pipe included

Ingersoll-Rand TH75W Drill Rig - For Sale

ID 783

Atlas Copco Drilling Rig - 2006 Built For Sale

Worldoils Marketplace

Atlas Copco T4BH (Blast Hole) Drill Rig - For Sale

ID 1207

Worldoils Marketplace

700HP Trailer Mounted Rack & Pinion, Super Single Rig

ID 2540

Worldoils Marketplace

850HP Trailer Mounted Rack & Pinion Rig for sale

ID 2537

Worldoils Marketplace

Worldrigs ID: WR660

Schramm T130 Drill Rig For Sale
Used Schramm T130 Drill Rig for Sale

Model : T130 Drill Rig
Manufacturer : Schramm
Model Year : 2003
Condition : Used

Description

2003 Schramm T130 Drill Rig - S/N: J130-0707
Detroit DDC/MTU V12-2000TA DDEC Diesel Deck Engine
Mast: Telescoping construction permits long head travel 50’' ft
Note: Shorter length in transport position
130,000 lbs of Pullback
Free standing design with 28"” table opening
Sullair 1350 cfm / 350 psi Air Compressor (Rebuilt with low hours)
Hydraulic pumps (low hours since rebuilt)
Top Head: Fixed position - two hydraulic motors. 0-143 RPM with 106,600 in-lb of torque
Pipe handling sling
Set up for RD20 style (4-½”" X 30'’ X 2-7/8" IF) Drill Pipe
Carousel
Cat Water Injection Pump
Graco Hammer Lubricator
Mounted on a CCC (Crane Carrier Company) Truck - VIN#: 1CYDGD5843T046189
CAT diesel engine
425/65R22.5 front tires 12R22.5 rear tires
Sub Base: 9'’ wide 40'’ long and 3’' tall & Basic Tooling Included

Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
--------------------------------------------------------------------------------------------------------------------
Search words(for official use only) -
Schramm T130 Drill Rig For Sale
Schramm Land Drilling Rig For sale
Drilling Rig - Schramm T130 For Sale
Used Schramm T130 Drill Rig for Sale
Schramm T130 Drill Rig For sale
Used Drilling rig for sale in USA
----------------------------------------------------------------------------------------------

Schramm T130 Drill Rig for Sale

ID 660

Worldoils Marketplace

850HP Trailer Mounted Rack & Pinion Rig for sale

ID 2538

10,000ft Drilling Depth Super Single Rig for Sale

Worldoils Marketplace

10,000ft Drilling Depth Super Single Rig for Sale

ID 2539

Worldoils Marketplace

Worldrigs ID: WR190

750 HP Mechanical Drilling Rig for Sale
Used 750hp Mechanical Drilling Rig
2008 built Mechanical Drilling Rig - Used

1. Introduction

Carrier : Self propelled - six axle carrier rated at 60 tonne
Mast : 120 ft clear height rated to 338,000 lbs with 8 lines
Type Of Rig : Mechanical rig
Year of Manufacturer : 1980
Rig Depth Rating : 3,000 mtrs with 4-1/2” (16.6lbs/ft) drill-pipe

2. Hoisting System

2.1 Drawworks -
Manufacturer : Cooper
Model : LTO 750
Draw-works HP Rating : 750 hp
Drive Motors : CAT 3406-C diesel engines (New Sept 2003)
Transmissions : Allison Model 5860 CLT torquematic transmissions
Engine HP Rating : 400 hp each
Quantity Motors : Two

2.1.1 Main Drum -
Fast Line Rated Single Line Pull : 50,000 lbs
Drum Sleeve : Lebus International grooved sleeve
Grooved To Suit Drill line : 1-1/8” diameter
Brake Cooling : Brakes cooled by circulating water

2.1.2 Auxiliary Brake -
Manufacture : Parmac
Model : 202 Parmac water brake

2.1.3 Deadline Anchor -
Manufacturer : Martin-Decker
Model : Hercules 118T Deadline anchor
Drill line Wire Rope Size : 1-1/8”
Rated Deadline Load : 40,000lbs

2.1.4 Crown Saver -
Manufacturer : Koomey
Model : Crown-O-Matic (Crown saver only)

2.1.5 Auto Driller -
Manufacture : AOI
Model : TM-551

2.2 Derrick / Mast -
Manufacturer : Pemco Equipment Company
Model : 120-350-C
API Capacity : 350,000 lbs
Height : 120 ft (under the crown to the ground)
Rated Static Hook Load : 338,000 lbs with 8 lines
Racking Capacity : 145 stands of 4-1/2” DP & 12 stands of DC
Maximum wind speed : 65 miles per hour
Number Of Sheaves In Crown Section : 5 only
Maximum Number of Lines : 8 lines
Guying Arrangement : Internally guyed

2.2.1 Make-up Cathead -
Type : Hydraulic cylinder
Location : Mounted in the back of the derrick
Maximum Make-up Torque : 30,000ft / lbs (single line pull)

2.2.2 Bereak-out Cathead -
Type : Hydraulic cylinder
Location : Mounted in the back of the derrick
Maximum Break-out Torque : 40,000ft / lbs (single line pull)

2.3 Substructure -
Manufacturer : Derrick Services Incorporated
Model : DS11 17 - 650
Height to the top of the Rotary Table : 17 ft high
Weight : 48,700 lbs (excluding Rotary table)
Setback area carrying capacity : 3,000 mtrs
Setback Capacity : 300,000 lbs
Rotary Beams : 350,000 lbs
Rotary table beams to ground level : 14ft clearance under Rotary beams

2.3.1. Sub Base Raising Winches : Not applicable

2.4 Drilling Line -
Manufacturer : Union
Rope Diameter : 1-1/8"
Length Per Reel : 3,500 ft
Construction : 6 x 19 EIPS
Breaking strength single pull : 130,000 lbs (578 kN) straight pull

2.5 Travelling Block -
Manufacturer : National
Model : 435-G-175
API working load capacity : 385,000 lbs
Number Of Sheaves : 4
Size Of Sheaves : 36” diameter
Sheaves Grooved To Suit : 1-1/8” drill line
Quantity : One

Elevator Links -
Manufacture : Varco
Size : 2-1/4” diameter x 108” long
Load Capacity : 250 tonne
Quantity : One set (2 per set)

2.7 Hydraulic Service Winch No.1 -
Manufacturer : Braden
Model : PD12
Rated Line Pull > 1st Layer : 12,000 lbs
Quantity : One

2.7.1 Hydraulic Service Winch No.2 -
Manufacturer : Ramsey
Model : J- 10A
Rated Line Pull > 1st Layer : 3,750 lbs
Quantity : One

2.7.2 Man-Rider Winch
Manufacturer : Ingersoll – Rand
Model : LS150RLP-L-B-E
Capacity : 150 kg Max Lift
Brake : 2 Independent, Auto Brake (Band and disc brake)
Safety Features :
Overload Protection
Upper and Lower Limit Switch with Emerg.-stop
Shack line detector & drum protection
Quantity : One

2.8 Casing Stabbing Board -
Manufacturer : Engineered stabbing board
Type : Adjustable height using endless chain
Work platform :
Travelling Dolly has large pins that are manually
engaged @ the correct working height
Safety:
Quantity : One

3. Circulating Equipment

Mud tanks designed for 13 PPG mud. All surface equipment
rated to 5,000 psi working psi

3.1 Mud tanks -
Total active capacity : 500 barrels
Total Pre-Hydration Capacity : 190 barrels

3.1.1 Tank No.1 (suction tank) -
Total capacity : 360 barrels
Pill Tank : 50 barrels
Pre-Mix Tank : 140 barrels
Suction Tank : 140 barrels

3.1.2 Tank No.2 (shaker tank) -
Total Capacity : 360 barrels
Intermediate Tank : 230 barrels
Desilter Tank : 50 barrels
Desander Tank : 50 barrels
Sand Trap : 30 barrels

3.1.3 Trip Tank -
Trip total capacity : 40 barrels
Pump unit :
1-1/8” - 2 x 3 centrifugal pump
Three phase – 60Hz, 20 hp running @ 1750 rpm

3.2 Mud Pumps No.1 and No.2
Manufacture : National
Model : 8-P-80
Max Input : 800 hp @ 160 SPM
Input Drive : Belt driven
Max Pressure :
4395 psi with 4-1/2” Liners (on request at client’s cost)
3560 psi with 5” Liners (on request at client’s cost)

4 Rotating Equipment

4.1 Top Drive (Rental option)
Manufacture : Tesco
Model : 475 HP, 250 ton, HMIS
Rated Capacity : 250 ton
Maximum Torque : 23,500 ft - lbs
Maximum Speed : 170 rpm
Power Unit : HPU
Optional Extras : N/A

4.2 Swivel -
Manufacturer : National
Model : P-200
Working Load Rating : 440,000 lbs
Load Bearing Rating @ 100 rpm : 297,000 lbs
Working pressure limit : 5,000 psi
Quantity : One

4.3 Kelly -
Manufacturer : Omsco
Size : 5-1/4"
Shape : Hexagonal
Overall Length : 40 ft
Working Length : 38 ft
Connection, Box : 6-5/8” Reg LH
Connection, Pin : 4” IF (NC 46)
Quantity : One

4.4 Kelly Drive Bushing -
Manufacturer : Varco
Model : 27 HDP
Type : Pin drive
Rollers : To suit 5-1/4” Hex Kelly
Quantity : One

4.5 Rotary Table -
Manufacturer : Ideco
Model : SR-23-E
Opening : 23”
Drive : Chain driven with power from Drawworks engines
Static Capacity : 1,000,000 lbs
Rotating Load : 661,000 lbs
Max. speed : 200 rpm (no load, reduces as load increases)
API Bowls : Bowl No.’s 1 & 2
Quantity : One

4.6 Kelly Spinner -
Manufacturer : Gill
Model : Type 100
Power Unit : Pneumatically powered
Quantity : One

5 Well Control Equipment

5.1 Blowout Preventers Annular -
Manufacturer : Hydril
Model : GK
Connection : Studded on the top and flanged on the bottom
Size : 13-5/8”
Work Pressure : 5,000 psi
Quantity : One

5.2 BOP Handling System -
Troller handling system :
Engineered and certified BOP handling system
Lifted using the travelling blocks and wire ropes

5.3 Drilling Spools and Adaptors -
Drilling Spool :
Quantity : 1
Description :
Flanged spool 24” high
13-5/8” 5,000 psi x 13-5/8” 5,000 psi complete with
One 2” x 5,000 psi side outlet & One 3” x 5,000psi
side outlet

5.4 Accumulator -
Manufacturer : Koomey
Model : 108-10S, type 80
Bottles : 12 x 10 gallon, bottom loading
Manifold Quantity : 4 banks
Reservoir Capacity : 280 Gallons

Functions : 4 x 1” selectors plus 1 x 1“ spare selector
Triplex Pump : 1 unit, 3/4” Plungers
Air Pumps : 2 units, 8.1/2” air end x 60:1 ratio

Working Pressure :
3,000 psi
a) Low accumulator pressure
b) Low fluid level
c) Low air pressure

Audible Safety Alarms For : Remote Koomey control station on the rig floor
Drillers Control : Operates annular, pipe & blind rams & HCR

6. Instrumentation

- Advanced Driller Monitoring System (ADMS) with I.S. Barrier Box
- System to monitor record and display the following signals in analogue
and digital format :
• 4 Individual Pit Level Indicators
• Total Pit Volume Summaries
• Loss / Gain
• 2 Individual Stroke Per Minute Indicators
• Total Strokes Indicator
• 2 Individual Fill Stroke Indicators
• Total Fill Stroke Indicator
• Individual Trip Tank Indicator
• % Return Flow Indicator
• Flow In Indicator
• Cumulative Flow In Indicator
• Stand Pipe Pressure Indicator
• Hook Load Indicator
• Weight On Bit Indicator
• Depth / Rop / Bit Depth / Block & Hook Position
• Rotary Rpm / Torque Indicators
• Slip In & Slip Out Indication
• Pipe Tally
• Messaging Between all Users
• Time Since Last Foot Drilled

Note :
All monitored parameters and derived signals will have the ability
to set high and low alarms.

7. Accomodation

7.1 Rig site mini-camp :
One only office / communication shack (for MB Century personnel only)
• 40ft long x 10ft wide x 10ft high.
• 2 air conditioner units.
• Work stations for all 3 trades-man, STAO & Rig manager.

Note : Mini camp is for 4 personnel

7.1.2 One only smoko shack as outline below :
• 20ft long x 10ft wide x 10ft high.
• 1 flush toilet.
• 1 small fridge.
• 1 microwave.
• 1 air conditioner.
• 1000Ltr water tank with pump.

7.1.3 One only Rig manager / Company-man sleeper shack as follows :
• 40ft long x 10ft wide x 10ft high.
• 2 bedrooms. (1 each end)
• 1 air condition per room.
• 1 shared bathroom in the middle of the shack.

7.1.4 One only small Airman Generator to run the above buildings
only plus any other MB Century buildings as required.

7.1.5 One only 5,000Ltr water tank to supply water to the above 3 buildings.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.