Oil, Gas and Offshore Equipments marketplace, Oil & gas equipments

Untitled Document

Search Here

Rig/Vessel/Equipment Name:
Category:
Subcategory:
Buy/Sell/Hire/Need for hiring:
ID:

Browse equipments

No relevant equipments are found in our database.

Search again

Untitled Document

Featured equipments for sale

Ingersoll-Rand T3W Drilling Rig For Sale

Worldoils Marketplace

Worldrigs ID: WR741

Ingersoll-Rand T3W Drilling Rig For Sale
2002 Built Ingersoll-Rand T3W Drilling Rig For Sale

Model : T3W Drill Rig
Manufacturer : Ingersoll-Rand
Year : 2002
Condition : Used

Description :

2002 Ingersoll-Rand T3w Drill Rig - S/N: 6707
IR HR2 900 cfm / 350 psi Air Compressor (Rebuilt in 2013 with 200 Hours
Since Rebuild)
CAT 3406 Diesel Deck Engine - Rated 475 Horsepower with 11,800 Original
Hours (New Head Installed in 2011)
7-Rod Carousel For (4-1/2” X 20’) Drill Pipe
4 Newer Hydraulic Motors On Top Head (All Bearings Replaced in Top
Head in 2010)
6-gal. Hammer Oiler
18 GPM Bean Water Injection Pump
Single Rod Loader
Torque Limit Control
18,000 LBS. Main Hoist
2,000 LBS. Utility Hoist
6” Hammer Pocket
4-Leveling Jacks
300' Feet of Drill Pipe Included
Mounted On AN 2002 International Model 2674 Truck W/A CAT C12, 340
Horepower Engine
52,000 Miles On Truck
VIN. #1HTGLAXT22H515312
Regular Maintenance Done Every 200 Hrs.

Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------------
Search words (for official use only) -
Ingersoll-Rand T3W Drilling Rig For Sale
Used Ingersoll-Rand T3W Drilling Rig for Sale
Ingersoll-Rand T3W Drilling Rig - 2002 Built for Sale
2002 Built Ingersoll-Rand T3W Drilling Rig For Sale
Ingersoll-Rand T3W Drilling Rig For Sale in USA
-------------------------------------------------------------------------------------------------

Ingersoll-Rand T3W Drilling Rig For Sale

ID 741

Worldoils Marketplace

Worldrigs ID: WR304

Coiled Tubing Rig for Sale
CT Rigs for Sale
Coiled Tubing unit

Specifications :
Year : 2007
Make : Kenworth
Model : T800B
Engine : CAT C-15
Odometer : 21879KM

Hours : 1433
Front : Dual Axle
Rear : Tri Axle
Air compressor : 330 CFM
Injector : 20,000 LB

Drum capacity :
1” – 4,88M
1¼” – 3,200M
1½” – 2,300M

Hand tools : Basic assortment
Coil tubing : 2300M 1¾”
Catch tank

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------
Search words (for official use only) :
Used Coiled tubing rigs
Used CT rigs
Coiled Tubing unit
Coiled Tubing Rigs in Canada
Coiled Tubing Rig
CT Rig in Canada
Used Coiled Tubing Units
------------------------------------------------------------------

Coiled Tubing Unit for sale

ID 304

Kobelco CKE1350-1F Crawler Crane for Sale

Worldoils Marketplace

Worldrigs ID: WR1507

Kobelco CKE1350-1F Crawler Crane for Sale
135 Tons Kobelco CKE1350-1F Crawler Crane for Sale

Main Specifications

Crane Boom
Max. Lifting Capacity 135 t/4.5 m
Max. Length 76.2 m

Luffing Boom
Max. Lifting Capacity 80 t/8.0 m
Max. Length 47.9 m

Long Boom
Max. Lifting Capacity 44.3 t/10.6 m
Max. Length 82.3 m

Fixed Jib
Max. Lifting Capacity 26.8 t/16.0 m
Max. Length 30.5 m
Max. Combination 61.0 m + 30.5 m

Luffing Jib
Max. Lifting Capacity 36 t/12.0 m
Max. Combination 47.9 m + 32.0 m, 44.8 m + 53.3 m

Main & Aux. Winch
Max. Line Speed 120 m/min (1st layer)
Rated Line Pull (Single Line) 132 kN {13.5 tf}
Wire Rope Diameter 26 mm
Wire Rope Length 275 m (Main) 255 m (Aux.)
Brake Type Spring-set hydraulically released (Nagative)
Free-Fall Brake Type Wet-type multiple disc brake (Optional)

Working Speed
Swing Speed 2.1 min-1 {rpm}
Travel Speed 1.3/0.9 km/h

Power Plant
Model Hino P11C-UN
Engine Output 247 kW/2,000 min-1 {rpm}
Fuel Tank Capacity 400 liters

Hydraulic System
Main Pumps 4 variable displacement
Max. Pressure 31.9 MPa {325 kgf/cm2}
Hydraulic Tank Capacity 535 liters
Self-Removal Device Standard counterweight removal

Weight
Operating Weight* Approx. 136 t
Ground Pressure* 106 kPa {1.08 kgf/cm2}
Counterweight 53.0 t (Upper), 10.0 t (Lower)
Transport Weight** Approx. 39.7 t

* Including upper and lower machine, 53.0 ton counterweight and 10.0 ton
carbody weight, basic boom, hook, and other accessories.
** Base machine with trans-lifter, 70 t hook, main and aux. winches (non-free fall)
including wire rope, self removal device.

We also have used cranes.

Additional information regarding this equipment will be shown on request

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

Kobelco CKE1350-1F Crawler Crane for Sale

ID 1507

Worldoils Marketplace

Worldrigs ID: WR2828

170 ft Fast Supply Vessel for Sale
FSV - 2006 Built for Sale

Description :

General
Hull : 48
Vessel Type : FSV - Fast Supply Vessel
Vessel Class : Crew Boat
Year Built : 2006

Dimensions
Dimensions : 170 ft. X 30 ft. X 13 ft. 8 in. (51.8 m X 9.14 mX 4.17 m)
Length Overall : 170 ft.
Clear Deck : 191 ft. (58.22 m)
Cargo Deck Area : 2,700 sq. ft. (250.8 m2)
Deck Cargo Capacity : 275 LT (279.41 MT)
Deadweight Tonnage : 353 LT (358.66 MT)

Classification
ABS : Loadline
ABS : AMS (HSC Crewboat)
ABS : A1
ABS : DP 2

Capacities

Fast Supply Vessel for Sale

ID 2828

Tech RT 400 Hydraulic Drilling Rig for Sale

Worldoils Marketplace

Worldrigs ID: WR2890

Tech RT 400 Hydraulic Drilling Rig for Sale
525HP Tech RT 400 Hydraulic Drilling Rig - For Sale

Descriptions :

- Rig Tech Rt 400 525 Hp Grooved F/ 1-1/8" Line P/B Detroit Series 60 Diesel Eng,

Allison 6610 Trans, Eatonauxiliary Brake, International Derrick Service 67ft h X 8ft w,

500,000# Gnc, Hyd. Raised Mast Mtd. On 3-Axle

- Carrier W/ Venture Tech XK250 Hyd. Top Drive, Ids 12ft hx 10ft w Substructure W/ Mud Boat

Skid & Pipehandlingboom Arm (Note: 10ft 7" Clearance Under Rotary Beams) Sub & Mast

- Brake Cooling Unit, Approx. 600-Gal Water Tank W/ Allen Bradley Switch Gear,

(2) Cobra 2 X3 X 11 Cent Pumps, P/B 25 Hp Elec. Motors, Skidded.

- Kohler Model 400dse 380 Kw Ac Gen, S/N: 2023744,P/B Detroit Series 60, 585 Hp @

1800 Rpm Diesel Eng, S/N: 06R0815243, W/ Elec. Starter,Radiator, Gauges, Skidded;

Marathon Model 400d8E 380 Kw Ac Gen, S/N: 2019092, P/B Detroitseries 60,

685 Hp @ 1800 Rpm Diesel Eng, S/N: 06R0805025, W/ Elec. Starter, Radiator, Gauges,

Skidded; Venture Tech Hpu 250-Ton Hyd. Power Unit, P/B Detroit Series 60

Diesel Eng, S/N:06r0805644 W/ Elec. Start; Paletec Model 25DG Air Compressor,

P/B 25 Hp Elec. Motor W/ Air volume Tank; 12ft w X 50ft l Utility House W/ Cutler-Hammer

Series 2100 Elec. Controlpanel W/ Wiring, 75 Kva Elec.Transformer, Fluorescent Lights, Skidded.

- Rs-F1000 Triplex Mud Pump, 1000 Hp, Steel Fluid End, W/ Quick-Change Caps,

Odrill 3" Shear Relief Valve,Rod Cooling Pump, Wedco 6000# Pressure Gauge,

Bull Wheel, Master Skidded; Mud Hog 5" X 6" Chargingpump, 5000# Pulsation Dampener,

P/B Detroit.

- Hydril GK-10-900, 11" 3000# Annular Bop.

- 8ft w X 20ft l Crimped Steel Top Doghouse W/ Round Top, Knowledge Box, (4) Lockers,

Bench Storage, Cabinets, Parts Bins, 4-Station B.O.P. Remote Closing Unit, Fluorescent

Lights, Heater, Skidded; Drillers House Telescopes Down To 21ft l Porch Extension

W/ Junk Box Unitized On A Skid W/ 7ft 9"W X 20ft l Crimped Steel Change House

W/ 7ft 3"L Covered Porch Ext., Round Top, (13) Lockers, Bench Storage,

Parts Bins, 5-Station Type 80 Closing Unit.

- 7ft 10"W X 8ft 4"H X 40ft l 423-Bbl. Water Tank W/ 8ft l Porch Covered Ext. W/ Mud Hog

& Double Life 2" X 3" Cent Pumps, Skidded.

- 8ft Dia X 27ft 3"L 13,000-Gal Fuel Tank W/ 4ft 11"L Porch Ext. & 7ft 10"L Porch Ext. (2)

Fuel Transfer Pumps P/B 3 Hp Elec. Motors, 5-Compartment Lubester, Skidded

Tech RT 400 Hydraulic Drilling Rig - For Sale

ID 2890

Worldoils Marketplace

Worldrigs ID: WR1978

Flattop Barge 2009 Built for Sale
Flattop Barge for Sale

Description :

Type : Flattop Barge
Dimensions : 73.15m x 16.15m x 4.22m
Class : RMRS
Build : 2009
Deck : GRT / NRT : 1284 / 385 Deadweight : 569.48 LT

Capacities :
Deck Loading : 1500 lbs/square foot (7 ton m2)
Cargo Capacity at Max Load Line :
2,900 LT (Estimated)

Location : Caspian Sea

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

------------------------------------------------------------
Search words (for official use only) -
Flat Top Barge for Sale
73.15m Flat-Top Barge for Sale
2009 Built Flat Top Barge
Flat Top Barge in Caspian Sea
------------------------------------------------------------

Flattop Barge - 2009 Built - for Sale

ID 1978

Worldoils Marketplace

Worldrigs ID: WR1438

Skytop Brewster N-75 Mechanical Drilling rig
1000 HP Mechanical Drill Rig in Excellent Condition
Skytop Brewster Land Drilling Rig for Sale

Description

Drawworks :
Skytop Brewster N75, 1 ¼” lebus grooved, parmac inc hydromatic brake model D631228,
p/b (2) Cat 3508, 608 HP, Oilworks model C-300-64, Skytop Brewster drillers console,
Model 50B weight indicator – 10 lines 500,000#

Mast :
Lee C Moore, 131’, 450,000# SHL on 10 lines, 6 sheave crown block,
racking capacity of 9000’ of 4 ½” drill pipe

Substructure : box on box, 16’H x 24’W x 47’L

Top Drive : Tesco 250 Ton, p/b Cat C15, 425HP, 354 KW

Hydraulic Unit : Tesco model D2P, 425 HP

Block : Ideco Model 67-19, 360 Ton

Hook : Ideco 360 Ton

Swivel : National P-400, 400 Ton

Kelly Spinner : Oilworks 1500, 4”

Pipe Spinner : Oilworks OWI 35C

Kelly : 5 ¼” hexagonal, 40’, 5000 psi

Kelly Bushing : hexagonal

Rotary Table : Spectro RC275, 500 Ton, 27 ½”

Mud Pumps :
Pump #1 Mudder F1000, p/b Cat 398B, 925 HP
Pump #2 National Maxum M1000, p/b Cat 398, 630 HP

Mud System :
Shakers – (2) Brandt King Cobras
Degasser – National Oilwell Varco
Desilter – Brandt 16 cone
Desander – Derrick 2 cone, 10” with Brandt model MC17473092223, 3 panel mud processor
Choke Manifold – 5000 psi
Gas Buster – Ingeniera Mecanica Aplicada (Applied Mechanical Engineering)
Cuttings Pit – 19 cubic meters
Vibrator Hose – 65’ of 4”, 5000 psi
Suction Pit – 40.5 cubic meters
Mud Hopper
Sediment Tank – 50 cubic meters
Trip Tank – 7 cubic meters
Cuttings Pit - 32 cubic meters
Settling Tank – 55.4 cubic meter

BOP :
Jiangsu Xinde Petroleum model FH28-35, 11” 5000 psi annular.
Petroleum Oiltools model UDBL 11” 5000 psi double, Koomey 202 gallon

Remote Koomey Control : Dongsu Model SZ01-1-4

Generators :
Generator #1 – Cat C18, 831 HP, 620 KW,
Compressor #1 – Gardner Denver model EDE 99N, 120 psi, 60hz
Generator #2 – Cat C18, 900 HP, 671 KW,
Compressor #2 - Gardner Denver model EDE 99N, 120 psi, 60hz
Gen House – Square D model 6

Tanks & Houses :
Diesel Tank – 38.1 cubic meters
Water Tank – 43 cubic meters
Upper Dog House – 1.78 meter x 15.85 meter x 1.8 meter
Parts House – 3.06 meters x 9.1 meters x 2.39 meters
Parts House – 2.45 meters x 14.43 meters x 2.78 meters
Gen House – 3.56 meters x 11.5m x 3.12 m
Compressor House – 2.23 M x 3.12m x 2.65m
Chemical House – 2.32m x 4.6m x 2.35m

Ancillary Equipment :
Drill Spool – 1 ¼” drill line
Compressed Air Cylinder – 400 gallon
Air Hoists –(2) Ingersall Rand, 4000#
Deadline Anchor – National
Catwalk – 2.55 meters x 5.2 meters x 1.17 meters, with VDoor
Stand Pipe – 4”
Tongs – (2) mud king products, 4”
Pipe Racks – 8.53m x 1.22m x 1.07m
Junk Box – 2.23m x 3.38m x 1.10m
Generators – (2) Cat LC7, 819 Amp, 480V, 60hz
Transformer – Square D model EE150T3H, 150 KVA, 60hz

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Skytop Brewster Mechanical Drilling Rig for Sale in USA
Skytop Brewster N75 12,000’ Drilling Rig
1000hp Land Drilling Rigs for Sale
Land Drilling Rig in Good Condition
Mechanical Drilling Rig for Sale
Skytop Brewster Drilling Rig in USA
Drilling Rig 1000 hp in USA
---------------------------------------------------------------------------------------------------------------

Skytop Brewster N75 - 1000 HP Mechanical Drilling Rig - for Sale

ID 1438

2000 Built Offshore Supply Vessel for Sale

Worldoils Marketplace

Worldrigs ID: WR2884

OSV- 2000 Built - For Sale

2000 Built Offshore Supply Vessel for Sale

Description :

Offshore Supply Vessel - 2000 Built - For Sale

ID 2884

Worldoils Marketplace

Worldrigs ID: WR1394

Ocean going tug for sale
8000 BHP Ocean going tug for sale
Salvage tug for Sale

General Particulars
Year Built : 1989
Classification : RINA,Italia
Type : Ocean Going/Salvage Tug Boat

Principal Dimensions
Length Overall : 72.4m
Beam : 13.01m
Depth : 6.00m
Draft : 5.37m
Maximum Draft : 4.12m
Grass Tonnage : 1,819 tons
Net Tonnage : 545 tons

Capacities
Fuel Oil(MFO) : 1,423.78 m3
Fuel Oil(MGO) : 287.02 m3
Lub. Oil : 33.26 m3
Fresh Water : 288.06 m3

Towing equipment
Winch : Double Drum Hydraulic Brattvarg
Tow Drum : Two
Capacity (each drum) : 64mm wire x 900m
Towing Hook : Breaking Load 30 tons
Delta Plate
Shackles
Chaffin Chain
Solar Light

Vessel's Mooring
Windlass : 2
Tugger Winch : 2
Capsterm : 1

Machinery
Main Engine : NIIGATA 8MG40X
BHP / RPM @ 100% : 4,000BHP x 2 Sets(8,000BHP - 5,884KW)
Bollard Pull : 108.0 Ton
Propeller : FPP Type x 2 sets
Aux Engine : YANMAR 6MAR-HT,470HP x 2 sets
Generator : 280KW x 2 sets,440/110V 60Hz
Emergency Generator : 35KW Generator 1 sets
Bow Thruster

Performance (Typical)
Max. Speed : 12.5 Knots
Eco. Speed : 10.0 Knots
Endurace : 90 days
Bollard Pull : 108.0 MT

Navigation equipment
Radar 1 : JRC / JMA-9122-6XA
Radar 2 : JRC / JMA-5106
GPS : SAMYUNG / N-100A,SPR-1400
Echosounder : JRC / JFE-570S
Auto Pilot : TKC / PR-228H
AIS : SAMYUNG / SI-30
Inmarsat C : T & T / TT-3020C
BNWAS : HANSHIN / HBN-117
Navtex : SAMYUNG / SNX-300
Anemometer : DONGWON / DW-300

Special Equipment
Deck Crane : 3.0 MT SWL @ 10m Radius
Yokohama Fender : 2sets x 1.5m Dia

Accommodation
Cabins for Crew :
18 x 1-man = 18
Total Accomodation capacity = 18

Messrooms : 1 x Messroom / Seating 24

All accommodation is fully air conditioned

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------
Search words :
Ocean going tug 1989 Built for sale
8000 BHP 108 T BP Salvage Tug for Sale
Salvage Tug for Sale
1989 Built Tug for Sale
Ocean going/salvage Tug
---------------------------------------------------------------------------------------

Ocean Going/Salvage Tug 8,000BHP 108T BP for sale

ID 1394

Atlas Copco T-45-11 Drilling Rig for Sale

Worldoils Marketplace

Atlas Copco T-45-11 Drilling Rig - For Sale

ID 3021

Worldoils Marketplace

Worldrigs ID: WR2068

71 pax Crew Boat and Utility Vessel for sale
Used 1998 built Utility Vessel for Sale
Over 36M Utility Vessel for Sale

General
Year Built : 1998
Classification : Bureau Veritas
Notation : I, HULL, MACH, Crewboat, Unrestricted Navigation

Dimensions
Length OA : 36.60m
Breadth : 7.60m
Depth : 3.30m
Draft (max) : 1.51m
Clear Deck Area : 90m²
GRT/NRT : 241/73

Capacities
Deck Cargo / Deck Strength : 50 Tons/ 1 ton/m²
Fuel Oil : 27m³
Fresh Water : 20m³

Propulsion System
Main Engines : 4 x 1000 BHP, Man B&W D2842 LE408
Main Generators : 2 x 68KW-380V / 3PH / 50HZ, Perkin TG2AM
Emergency Generator : Nil
Bow Thruster : Nil
Propellers : 4 x FPP

Accommodation
Passenger Seats : 71 pax

Life Saving Equipment
Life Rafts : 8 units
All other life saving appliances as per SOLAS requirements

Fire-Fighting / Anti-Pollution Equipment
External
FiFi System : Nil
Fire Pump : Nil
Monitors - (water) : Nil
- (water/foam) : Nil
Oil Dispersant System : Nil

Internal
Emergency Fire Pump
CO2 system in engine room
Fire Detection & Alarm System in living spaces & engine room

Navigational and Communication Equipment
SSB : 1 x ICOM IC-M710
MF/HF GMDSS : 1 x ICOM IC-M710
DSC GMDSS : 1 x Navicom RT-450 DSC
VHF :
1 x ICOM IC-M127
1 x Navicom RT-450 DSC

SSAS : 1 x Anatel Satamatics Sat 202
Radar : 2 x Furuno 1942 (X Band)
Echo Sounder : 1 x Furuno FCV668
Gyro Compass : Nil
Magnetic Compass : 1 x Danforth HS Constellation

Speed Log : Nil
Navtex Receiver : 1 x Furuno NX500
GPS : 1 x Furuno GP30
AIS : 1 x Samyung SI-30D-E
Two Way Radiotelephone : 2 x Samyung STV-160
EPIRB : 1 x Kannad Auto 406
FBB-150 : 1 unit for Email/Telephone
SART :
1 x ACR TelluSART mk3
1 x ACR Pathfinder 3

Miscellaneous
Fresh Water Maker : Nil
Oily Water Separator : Nil
Sewage Treatment Plant : Nil

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
----------------------------------------------------------------------
Search words (for official use only) -
1998 built Crewboat for Sale
71 pax Crew Boat for Sale
Utility Vessel - 1998 built - For Sale
71 pax Crew Boat and Utility Vessel for sale
Used 1998 built Utility Vessel for Sale
Over 36M Utility Vessel for Sale
36M Used Crewboat for Sale
Used Crew Boat and Utility Vessel for sale
-------------------------------------------------------------------------

71 Pax Crewboat / Utility Vessel for Sale

ID 2068

Worldoils Marketplace

Worldrigs ID: WR1236

National 110 UE 1500 HP SCR Drilling Rig for Sale
1500 HP SCR Land Drilling Rig
Used National 110 UE 1500hp SCR Rig for Sale

Specifications

Drawworks :
National 110 UE 1500HP Single Drum Drawworks, Lebus Grooved
f/1-3/8” Line, Makeup & Breakout Catheads, with Petron Driller’s
Control Console, Crown-O-Matic. Drawworks is remanufactured
by major machine shop with warranty.

Drawworks Power :
Apollo 752 DC Traction Motor, S/N-7514175, 1000 HP, with Emerson
AB34 10 HP Electric Blower Assembly, S/N-YC10E1B1.

Apollo 752 DC Traction Motor, S/N-7505238, 1000 HP, with Emerson
AB34 10 HP Electric Blower Assembly, S/N-YC10E1B2

Brake :
Rade Tech 88058DS Electric Brake

Derrick :
Skytop 142’H Cantilever Beam Leg Mast, 1,000,000 Lb. Static Hook Load,
Pin-Type, SKYTOP Crown Block w/(6) Crown Sheave Cluster, Crown
Safety Platform, Racking Board, Tong Counterweights, Ladder, Derrick
Climber, Mast Stand, 3-1/2” Standpipe & Manifold. Mast and sub will be
reconditioned and API inspected by Superior Derrick Service. Both mast &
sub were built in 1981 but never put in service until 2006.

Substructure :
Skytop 28’W x 26’H x 72’L Swing-Up Substructure, 1,000,000 Lb. Casing
Load, 600,000 Lb. Setback Capacity w/Rotary Beams, V-Door Ramp, Type
EB Deadline Anchor, Stairs, Safety Rails.

Power Source :
Kato 1050 KW AC Generator, S/N-2782533447, p/b CAT D399 Diesel Engine,
, w/Air Starter, Radiator, Gauges, Mounted on 10’W x 30’8”L Covered Skid.
Rebuilt and engines load tested.

Kato 1050 KW AC Generator, p/b CAT D399 Diesel Engine,
S/N-35B066244, w/Air Starter, Radiator, Gauges, Mounted on 10’W 30’8”L
Covered Skid. Rebuilt and engines load tested.

Kato 1050 KW AC Generator p/b CAT D399 Diesel Engine w/Air Starter, Radiator,
Gauges, Mounted on 10’W x 30’8”L Covered Skid. Rebuilt and engines load tested.

SCR Unit :
IDM 4-Bay SCR Unit, S/N-505622, w/9’2”L Porch, Switchgear & Instrumentation to
Control (3) 1050 KW AC Generators, Includes: (1) Brake Control Box, GE E-9000
Line Series Motor Control Center, Mounted in 10’3”W x 29’2”L Temperature-Controlled
House w/(2) Eubank V72-10733 Air Conditioners, S/Ns-KT025145323R &
KT025146323R, (1) Hammond750 KVA Transformer, S/N-DB05J231, (1) Hammond
75 KVA Transformer, S/N-DAJST0DB822, Mounted on 10’3”W x 29’2”L Skid.
Rebuilt and tested.

(4) Shopbuilt 1’W x 9’L Electrical Suitcases

(6) Shopbuilt 3’7”W x 22’9”L Electrical Suitcases w/Grasshopper

Air Package :
(Note : Mounted on Generator Skids)
World Air RVK-40 Air Compressor, S/N-5483, p/b WEG 30 HP Electric Motor, Mounted
on No. 1 Generator Skid

Curtis Air Compressor, S/N-20601, p/b Baldor 20 HP Electric Motor,
S/N-206813260264, w/230-Gallon Air Receiver Tank, Mounted on No. 1 Generator Skid

BEL AIR 3D3HL Air Compressor, S/N-147266, p/b Baldor 20 HP Electric Motor,
S/N-20601260264, w/230-Gallon Air Receiver Tank, Mounted on No. 2 Generator Skid

Pump (Primary) :
LS NOI 3NB1300C(10P130 style) Triplex Mud Pump, S/N-205-002, 1300 HP, w/(3)
6-3/4” x 10” Forged Steel Fluid Ends, Quick-Change Valve Caps & Cylinder Heads,
LS NOI 5000 PSI Pulsation Dampener, S/N-4J28, Double Life 5” x 6” Centrifugal
Charging Pump, S/N-5218, p/b Emerson 50 HP Electric Motor, S/N-C0510190029,
5000 PSI, Pressure Gauge, Mounted on 9’8”W x 30’2”L Skid.

Pump Power :
(2) Apollo 752 DC Traction Motor, S/N-41160046, 1000 HP, w/Emerson AB34 10 HP
Electric Blower Assembly, S/N-YC10E1B

Apollo 752 DC Traction Motor, S/N-7539480, 1000 HP, w/Emerson AB34 10 HP Electric
Blower Assembly, S/N-YC10E1B

Pump (Standby)
LS NOI 3NB1300C (10P130 style)Triplex Mud Pump, S/N-204-030, 1300 HP, w/(3)
6-3/4” x 10” Forged Steel Fluid Ends, Quick-Change Valve Caps & Cylinder Heads, LS
NOI 5000 PSI Pulsation Dampener, S/N-4J4, Double Life 5” x 6” Centrifugal Charging
Pump, S/N-5219, p/b Emerson 50 HP Electric Motor, S/N-C0510190034, 5000 PSI,
Pressure Gauge, Mounted on 9’8”W x 30’2”L Skid.

Pump Power :
(2) Apollo 752 DC Traction Motor, S/N-7538070, 1000 HP, w/Emerson AB34 10 HP
Electric Blower Assembly, S/N-YC10E1B

Apollo 752 DC Traction Motor, S/N-7428792, 1000 HP, w/Emerson AB34 10 HP Electric
Blower Assembly, S/N-YC10E1B

Rotating Equipment :
MUD KING RT275 27-1/2” Rotary Table, S/N-27511, w/Split Master Bushings, p/b
Apollo 752 Traction Motor w/Emerson AB34 10 HP Blower Assembly - Rebuilt.

Mud King 450-Ton Swivel - Rebuilt
5-1/4” x 40’L Hex Kelly
Varco HD Kelly Drive Bushing
International tools kelly spinner - Rebuilt
TIW Upper Kelly Spinner
TIW Lower Kelly Spinner

Traveling Equipment :
Ideco 525-Ton Block/Hook Combination Rebuilt
2-3/4” x 132” Elevator Links

Well Control Equipment :
Hydril GK Type 13 5/8” 5000# Annular Blowout Preventer - Rebuilt
Schaffer LWS Type- 13-5/8” x 5000 PSI DOUBLE Blowout Preventer - Rebuilt
Choke Line: (1) 4-1/16” x 10M Gate Valve, (1) 4-1/16” x 5M HCR Valve
Kill Line: (2) 2-1/16” x 10M Gate Valves, (1) 2-1/16” x 5M Check Valve

CPCPB 40-32 5-Station Closing Unit, S/N-4635, w/(16) 11-Gallon Accumulator Bottles,
Triplex Pump, S/N-05556, p/b Baldor 20 HP Electric Motor, S/N-20502170516, (2) Air
Pumps, S/Ns-205902170516 & 205902170517, Gauges, 8’W x 8’2”L Skid. Pressure tested.

5 - Station remote closing unit, mounted in doghouse

5000 PSI Choke Manifold w/5-Way Cross, (2) 4-1/16” x 10M Gate Valves, (7) 2-1/16” x 10M
Gate Valves, (2) 2-1/16” x 10M Adjustable Chokes, Mounted on 8’W x 14’L Adjustable-Height
Skid.

Rig Houses :
Shopbuilt 7’9’W x 25’1”L Doghouse w/5’L Covered Porch, Knowledge Box, Bench Storage,
Cabinets, Lights, Skidded

Shopbuilt 10’2”W x 33’1”L Change House w/Round Top, Knowledge Box, (24) Lockers, Bench
Storage, Cabinets, Washer, Lights, Skidded

(2) Shopbuilt 8’W x 19’10”L Parts Houses, Each w/Round Top, Parts Bins, Skidded

Mud System :
Shopbuilt 10’W x 9’6”’H x 50’L 543-Barrel Suction Tank w/9’L Covered Porch, (3) Compartments,
(5) Grove Gear 7-1/2 HP Mud Agitators, S/Ns-801759310051, 8017513100 & 80175931105,
Each p/b Marathon 7-1/2 HP Electric Motor, S/Ns-BV74445, BV74457, BV74456, BV74448
& BV74443, Mud Hopper, Caustic Tank, Internal Plumbing, Flat Bottom, Top-Mounted Walkways,
Stairs, Safety Rails, Skidded

MCM 5” x 6” Centrifugal Mixing Pump, S/N-11945, p/b Baldor 50 HP Electric Motor,
S/N-C065180234

MCM 5” x 6” Centrifugal Mixing Pump, S/N-11288, p/b Baldor 50 HP Electric Motor,
S/N-C065180224

Shopbuilt 10’W x 9’6”’H x 50’L 543-Barrel Shaker Tank w/10’W x 9’L Covered Porch, (3) Compartments,
Grove Gear 7-1/2 HP Mud Agitator, S/N-80175931005, p/b Marathon 7-1/2 HP Electric Motor,
S/N-BV74454, Internal Plumbing, Flat Bottom, Top-Mounted Walkways, Stairs, Safety Rails, Skidded

MCM 5” x 6” Centrifugal Desilter Pump, S/N-11915, p/b Marathon 50 HP Electric Motor
MCM 5” x 6” Centrifugal Desander Pump, S/N-11945, p/b Baldor 50 HP Electric Motor,
S/N-C0508110044

Odrill/MCM Linear Motion Shale Shaker - New
OdrillL/MCM Linear Motion Shale Shaker

Double Life Desander, S/N-3159, w/(2) 10” Cones
Double Life Desilter, S/N-3158, w/(8) 2” Cones
Dreco “Deep Pit” Degasser, S/N-3295, p/b Baldor 5 HP Electric Motor

Shopbuilt 10’ W x 9’6”H x 50’ long Mixing Tank. Two 15 hp Agitators. High pressure guns. Pit levelers.
Dump gates. Three Dividers. Oilfield Three Runner skid.

Water / Fuel Tanks :
Shopbuilt 10’2”Dia x 42’3”L 500-Barrel Water Tank, Skidded - New

Baker SPD 2” x 3” Centrifugal Water Pump, S/N-2012, p/b Teco 25 HP Electric Motor, S/N-050501000,
Mounted on Generator Skid No. 3

BAKER 2” x 3” Centrifugal Water Pump, S/N-2017, p/b Teco 25 HP Electric Motor,
S/N-05134600909, Mounted on Generator Skid No. 3

Shopbuilt 8’Dia x 32’3”L 12,141-Gallon Fuel Tank w/(2) SIEMENS Fuel Transfer Pumps, Each p/b Teco 2 HP
Electric Motor, S/Ns-BQ0520600001 & BQ0520600002, w/4’L Covered Porch, Skidded

Murphy 5-Compartment Lubester w/Pumps, Hoses, Reels, Mounted on 6’W x 13’L Skid

Handling Tools :
Varco SSW-10 Pipe Spinners
Type DB 3-1/2” x 10 3/4” Rotary Tongs, S/N-10031M1399 - Rebuilt
5” 350-Ton Drill Pipe Elevators
5” Drill Pipe Slips
6-1/2” Drill Collars Slips
8” Drill Collar Slips
6-1/2” & 8” Safety Clamps
Juling XJF5-35 Air Hoist, S/N-0509-1, 10,000 Lb. Capacity
Juling XJF5-35 Air Hoist, S/N-0509-2, 10,000 Lb. Capacity
5” Mud Bucket

Instrumentation :
Petron Weight Indicator, S/N-G1800 (NOTE: Located in Doghouse - Rebuilt
Totco Automatic Driller - Rebuilt
M&F Type D Mud Gauge, S/N-6773 - New

Auxiliary Equipment :
3-1/2” x 65’L Rotary Hose - New
3-1/2” x 12’L Vibrator Hose - New
3-1/2” x 18’L Vibrator Hose - New
Shopbuilt 5’W x 18”H x 60’L Catwalk, 2-Section, Steel Deck
(3) Sets of (6) 18”H x 28’L Shopbuilt Triangular Pipe Racks
Shopbuilt 8’W x 40’2”L Junk Box, Skidded
FIVE STAR Wireline Measuring Device, S/N-XCU081006N4, w/15,000’ of .092 Wireline - New.
1-3/8” Drill Line w/Ingersoll-Rand Air Tugger, S/N-SP051123032, Chain Driven. New drilling line
Rathole & Mousehole
Fluorescent, Mercury-Vapor & High-Pressure Sodium Rig Lights w/Wiring - All new wiring
Miscellaneous Spare Parts, Valves, Fire Extinguishers, Etc.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------
Search words (for official use only) :
National 110 UE 1500HP SCR Drilling Rig for sale
1500HP SCR Land Drilling Rig
National 110 UE 1500 HP SCR
Land Drilling Rig - National 110 UE - For Sale
Used National 110 UE 1500hp SCR Rig for Sale
SCR 1500hp Rig - National 110 UE
---------------------------------------------------------------------------------------------------

National 110 UE 1500 HP SCR Drilling Rig for Sale

ID 1236

Worldoils Marketplace

Worldrigs ID: WR2120

18 3/4"-10M Double Ram BOP for sale
Hydril 10K Ram Doubles 18 3/4 for sale

Description
18. 3/4"-10M Double Ram BOP.
Upper Ram Serial Number 140450.
Lower Ram Serial Number 140282.
Hydril 10K Double With Rams.
Flanged.

Dimensions : 3.7 x 1.65 x 1.9

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------
Search words(for official use only) :
BOP Equipment for Sale
18 3/4"-10M Double Ram BOP for sale
Hydril 10K Ram Doubles 18 3/4 for sale
Double Ram BOP of sale
-----------------------------------------------------------

18 3/4"-10M Double Ram BOP for sale

ID 2120

Worldoils Marketplace

Worldrigs ID: WR76

3300Ton Revolving Floating Crane Barge for Sale
Floating Crane Barge for Sale

Description :

Max Fixed lifting capacity : 3,300Tons
Max revolving lifting capacity : 2,600 Tons
Built in 2011
Length overall : 156m
Breadth(moulded) : 45m
Depth (moulded) : 13.5m

Operating draft : 7-12m
Full load displacement : 59,000MT
Ballast capacity : 35,000MT
Fuel oil capacity : 4,050MT
Fresh water : 2,800MT

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------------
Search words (for official use only) :
3000Ton crane barge for sale
Floating Crane for Sale in Asia
3300Ton Revolving Floating Crane in Asia
Floating Crane - 3000 Ton - For Sale
3300Ton Floating Crane for sale
----------------------------------------------------------------------------------------

Fully Revolving Floating Crane Barge - 3300Ton

ID 76

Chicago Pneumatic T650 Drilling Rig for Sale

Worldoils Marketplace

Chicago Pneumatic T650 Drilling Rig - For Sale

ID 2544

Shallow Draft Workboat - 2012 Built for Sale

Worldoils Marketplace

Worldrigs ID: WR1915

Shallow Draft Workboat for Sale
Shallow Draft Workboat - 2012 Built for Sale

Description :

Type : Shallow Draft Workboat
Dimensions : Loa : 28m / B:11m / D:2,5m
Class : ABS+A1(E),Towing Vessel,+AMS
Build : New Build delivery 2012
Machinery : 2 x Caterpillar 3412C TA 720 bhp@1800 RPM Total:1440bhp
Speed : Free Run Speed : 8.5 knots
Capacities : Bollard Pull : 19 tons Fuel Oil : 90m3 Fresh Water : 45m3
Location : S.E.Asia

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------------------
Search words (for official use only) -
Shallow Draft Workboat - 28m for Sale
28m Shallow Draft Workboat for Sale
2012 Built Shallow Draft Workboat for Sale
Shallow Draft Workboat for Sale in Asia
Offshore Shallow Draft Workboat for Sale
--------------------------------------------------------------------------------------------------------

Shallow Draft Workboat - 2012 Built for Sale

ID 1915

Worldoils Marketplace

ABS Class Fast Supply Vessel for Sale

ID 2582

Challenger M320 Drill Rig & Pipe for Sale

Worldoils Marketplace

Worldrigs ID: WR569

Challenger M320 Drill Rig & Pipe for Sale
Challenger Drilling Rig package - for Sale

Model : M320 Drill Rig & Pipe
Manufacturer : Challenger
Year : N/A
Condition : Used

Description:

Challenger M320 Drill Rig & Package
Mounted on 3-axle trailer
Rig Substructure
Single piece Hydraulically raised mast 64’ x 150,000 lbs double drum
Allison transmission
18’’ rotary table (RT-18’’-2)
Kelly bar 4 ½’’ x 40’
GMC Detroit 8V92N Diesel Engine 360 HP

Included as a package :
(2) Pipe Tubs with almost 5,000' ft of used drill pipe (30' x 4-1/2)
Dog house
Ideal (National supply Co)Type C-250 7-¼" x 15" Duplex Mud Pump, Skid Mounted,
Ratio : 5,64 & Rated output : 250, HP @ 60 RPM, Max 2500 lbs working pressure
Located : Europe

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

--------------------------------------------------------------------------------------------------------
Search words(for official use only) -
Challenger M320 Drill Rig & Pipe for Sale
Challenger Drilling Rig package - for Sale
Land Drilling Rig for Sale
Drilling Rig & Pipe for Sale
Used Challenger M320 Drilling Rig for Sale
Challenger M320 Drill Rig & Pipe for Sale in Europe
--------------------------------------------------------------------------------------------------------

Challenger M320 Drill Rig & Pipe for Sale

ID 569

Worldoils Marketplace

Worldrigs ID: WR1501

CKE2500 Kobelco Crawler Crane
Hydraulic Crawler Crane for sale
250T CKE2500 Kobelco Crawler Crane

Specifications

Main Boom
Max. Lifting Capacity : 250 t/4.0 m
Max. Length : 91.4 m

Fixed Jib
Max. Lifting Capacity : 26.8 t/9.8 m
Max. Combination : 76.2 m + 30.5 m

Luffing Jib
Max. Lifting Capacity : 70 t/9.8 m
Max. Combination : 61.0m + 51.8 m, 51.8 m + 61.0 m
Luffing Angle : 63° ~ 88°

Main & Aux. Winch
Max. Line Speed : 110 m/min (1st layer)
Rated Line Pull : 132 kN (13.5 tf)
Max. Line Pull : 245 kN (25 tf)
Wire Rope : 25 mm
Wire Rope Length : 480 m (Main) 385 m (Aux.)
Brake Type : Wet-type multiple disc brake
Free-Fall : Option

Working Speed
Swing Speed : 2.1 min-1 (rpm)
Travel Speed : 1.1/0.7 km/h

Power Plant
Model : Mitsubishi 6D24-TLU2D
Engine Output : 235 kW/2,000 min-1 (rpm)
Fuel Tank Capacity : 400 liters

Hydraulic System
Main Pumps : 4 variable displacement
Max. Pressure : 30.9 MPa (315 kgf/sq.cm)
Hydraulic Tank Capacity : 550 liters
Self-Erection Device : Standard

Weight
Operating Weight : Approx. 208 t
Counterweight : 80.6 t (Upper), 20.0 t (Lower)
Transport Weight : 44.9 t (Main machine)
Ground Pressure : 95 kPa (0.97 kgf/sq.cm)

We also have used cranes.

Additional information regarding this equipment will be shown on request

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

CKE2500 Kobelco Crawler Crane for sale

ID 1501

Worldoils Marketplace

Used Offshore Supply Vessel - 1999 Built - For Sale

ID 2889

Worldoils Marketplace

Tugs Boat - For Sale

ID 2712

Worldoils Marketplace

Worldrigs ID: WR2165

21.8M High Speed MPV for Sale
2000 Built Survey Vessel for sale

General
Type : High speed MPV
Built : 2000

Dimensions
Length OA : 21.8 m
Beam : 5.5 m
Draft [max] : 1.2 m

Performance
Cruise Speed : 20 knots
Max Speed : 24 knots
Main Engines : 2 x Man D 2842
Fuel Capacity : 8000 litres
Propulsion : Conventional props
Auxiliary : 2 x 25 kVa

Deck Equipment
Crane : Fazzi F40 980 kg SWL
Anchor Winch : Hydraulic

Accommodation
Full Live aboard capability
Sleeps 6 - all cabins have Air-Conditioning

Miscellaneous
Moonpool : 750mm x 750mm

Nautical Equipment
Radar : Raytheon R12-10
Echosounder : Raytheon V850
Reciever DGPS : Raytheon 398
VHF Radio : Sailor 4822
HF Radio : Sailor 4000
Chartplotter : Raytheon 620
Computer : C-Plot

Price & terms : Please enquire using the email form below

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
-----------------------------------------------------------------------
Search words (for official use only) :
21.8M High Speed MPV for Sale
2000 Built Survey Vessel for sale
Used Crew Transfer Vessel for sale
2000 Built MPV / Crew Transfer / Survey for Sale
Used High Speed Multi Purpose Vessel for sale
----------------------------------------------------------------------

21.8M High Speed MPV for Sale

ID 2165

Worldoils Marketplace

Worldrigs ID: WR147

New Generator for Sale
Caterpillar Industrial Generator for Sale
Industrial Generator

Description
1350Kw
9 x NEW Caterpillar 3516B
each rated 1350Kw @ 1200RPM
600 volts
ABS certified

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------
Search words(for official use only) :
Generator for Sale
Caterpillar Generator for Sale
New Industrial Generator for Sale
-----------------------------------------------------------------

Caterpillar Generator New for Sale

ID 147

Worldoils Marketplace

Worldrigs ID: WR831

Ingersoll Rand RD20R III Drilling Rig for Sale
2002 Built Drilling Rig for Sale in India

Specifications :

Ingersoll Rand RD20RIII,
Year of Manufacture : 2002,
Engine : Cummins QSK19 deck engine
Compressor : IR HR2.5 / 350 psi @ 1250cfm
Rotary Head : 4SV-2-10 Spur gear, top drive head assembly rated to 8,000 ft. lbs. torque
Mounted on : Crane Carrier 8 X 4 chassis with Cummins 305 diesel engine.
Range 3 tower package rated to 120,000 lbs. pullback.
7 rod carousel for handling 4.5”O.D. X 30’ long drill rods.

Additional Equipment :

DHD Lubricator
25 GPM Water Injection Pump

Below is a list of all repairs done or being completed on the 2002 RD20 Range III
on Tandem at this time :
New Clutch, Pressure Plate & Flywheel
Replaced Slow Feed Pump
Added a rebuilt floating spindle sub and adapters
Replaced the remote feed relief valve
New Pressure reducing valve
New UL88 kit
New interstage pressure gauge
Cummins QSK19 / 9000 hrs.
Rebuilt exchanged HR2.5 / Test hours only
Exchanged receiver tank.
60 gal. lube.
Walk ways on both sides.
New 11 spool.
Updated main valve.
Top head inspected / good.
Pulldown cylinders clean / repacked
Mast raisers will be resealed.
Crane Carrier 8X4 chassis with ISM305 Cummins and new rubber all around.
Complete service and test.
Overall condition is good with average paint.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------------------------
Search words(for official use only) :
Ingersoll Rand RD20 Range III Drilling Rig for Sale
Used Drilling Rig Ingersoll Rand RD20 R III
Ingersoll Rand RD20 Rig for Sale in India
Used Ingersoll Rand Drill Rig for Sale
Land Drilling Rig for Sale in India
2002 Built Ingersoll Rand RD20 Range III Drilling Rig
-----------------------------------------------------------------------------------------------------------------

Ingersoll Rand RD20 Range III Drill Rig for Sale

ID 831

2000HP Oilwell 2000-E Drilling Rig for Rent

ID 1124

1998 Gottwald HMK 280E Mobile Harbour Crane for sale

Worldoils Marketplace

Gottwald HMK 280E Mobile Harbour Crane for sale

ID 2199

Drilling Rig - Joy MS-4E Top Hammer Air Drive - For Sale

Worldoils Marketplace

Joy MS-4E Top Hammer Air Driven Drilling Rig - For Sale

ID 2901

Worldoils Marketplace

Worldrigs ID: WR2049

Tugboat - 2001 Built - for Sale
Used Tugboat for Sale in Asia

Description :

Year Built : 2001
Gross Tonnage : 286 M.T.
Designed Bollard Pull : 54.0 Tons
Dimension (L X B X D m) : 29.95 x 9.8 x 4.71
Main Engine : 2 x 2230 BHP Deutz SBV8M628 @ 1000 RPM
Class : IRA
Sister Ship Available : Y
Available : 1Q/16

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

--------------------------------------------------------------------------------------------------------
Search words (for official use only) -
Tugboat for Sale in Singapore
2001 Built Used Tugboat for Sale
29.95m Tugboat for Sale in Asia
Used Tugboat - 2001 Built - for Sale
-------------------------------------------------------------------------------------------------------

Tugboat - 2001 Built - for Sale

ID 2049

New UMD 160 Land Drilling Rig - For Sale

Worldoils Marketplace

Worldrigs ID: WR596

New UMD 160 Land Drilling Rig - For Sale in Europe
New Semi Mobile Drilling Rig For Sale - UMD 160

Main Technical Specifications
Engine type : 2 X C 13 ACERT
Nominal engine power hp (kW) : 2 X 415 (2 X 309)
Transmission : 2 X Allison 4500 OFS
Nominal hoisting capacity metric ton (lbs) : 160 (352000)
Workover depht (m) drill pipe (2 7/8”) : 6850
Drilling depht (m) (4 1/2“) : 2900
Rope diameter (mm) : 29
Mast height (m) : 36
Drilling floor height (m) : 5-6
Travelling system : 5x4
Working pressure (mpa) : 0, 65-0, 8

Technical Specifications
Drawworks
Main Drum -
Input power (hp) : 900
Barrel size : D24” W42”
Brake rim size : D44” W12”
Wire line size : 1 1/7” (29 mm)
Drum speed : 7F/1R
Brake cooling : Water circulation
Brake system : Band / disc / auxiliary (Parmac SSR-28 hydro-brake)
Chain drives :
All chains are fully encloded for oil bath lubrication ensuring longer life
and cleaner operation

Sand Line Drum -
Barrel size : D13” W37“
Brake rim size : D44” W9½”
Spooling capacity : 16114’
Sand line wire size : 9/16” (14 mm) - 5/8” (16 mm)

Rig Power & Tranamission
Diesel engine(s) : 2 x Caterpillar C-13 ACERT, 415Hp, 2.100rpm
Transmission(s) : 2 x Allison OFS 4500 series with torque converter
Right angle gear box : Min 900 hp gear box in oil bath gear case
Compound box :
Twin engine drive through transmission includes disconnect clutches
at compound shaft for engines.

Mast & Crown Block
Mast -
Mast complete set : Design and conform to APİ 4F specification
Mast height : 36m ( 118ft )
Max. static hook load capacity : 1.765kN ( 352.000lbs )
Racking capacity : 2.500m ( 4 ½’’ DP，19.2m double )
Height of the monkey board : 17.2m ( from floor )
Mast type : Hydraulic telescopic
Accessories : Two (2) X hydraulic catheads, Two (2) X tong weight boxes,
standpipe, exproof lightning....etc

Crown Block -
Crown block complete set : Design and conform to APİ 4F specification
Max. hook load : 1.568kN (352.000lbs)
Number of sheaves :
(3) Main + (1) fast line + (1) deadline + (1) sandline + (2) sheaves for service winch

Sheaves OD :
Fast Lines Ø36" ( Ø915mm )
Dead Line Ø32" ( Ø813mm )
Sand Line Ø32" ( Ø813mm )

Dia. of sheave’s grove :
Fast & Dead Lines Ø1⅛ " ( Ø29mm )
Sand & Winch Lines Ø 5/8" ( Ø16mm )

Substructure
Substructure complete set : Design and conform to APİ 4F specification
Height of substructure substructure : 5.5m
Area of substructure : 40m2
Max. static rotary load : 1.600kN
Set back capacity : 800kN
BOP lifting tools : 3 tons capacity electric or mechanic winches
Accessories : Mouse, rat hole, dog house

Rotary Table
Diameter of opening : 27½"
Center of table to centerline of sprocket teeth : 53¼"
Maximum static load, ton : 500
Max speed, rpm : 300
Gear ratio : 3.67
Dimensions (LxWxH), in : 94×66×27
Approximate weight, lbs : 13,500

Traveling Block & Hook
Traveling block :
1.600kN max. statik load, 4 sheaves, Ø36’’
sheaves dia. Ø1⅛’’ (Ø29mm ) groove dia.

Hook : 1.600kN max. statik load, 5tons spring stroke.
Elevator link(s) : 1.600kN rated load capacity.

Swivel
Static hook load, ton : 160
Working pressure, psi : 5,000
Maximum speed, rpm : 300
Coupling thread to stem : 6-5/8" Reg LH
Coupling thread to kelly : 6-5/8" Reg LH
Stem İ.D. : 3"

Trailer & Other Systems
Trailer :
Three axles semi mobile trailer, 12 wheels, fabricated high
tensile steel vehicle frame reinforced at points of greatest
stress. Highway equipment and cab included. Installed fuel tank.
Tool box. Auxilary drill line drum, all axles dressed brake, folding
walkwayss on both sides of trailer.

Hydraulic jacks : Six hydraulic operated leveling jacks
Hydraulic service winch : 5 metric tons drum pull capacity
Deadline anchor : Deadline anchor attached directly to trailer frame

Hydraulic system :
Hydraulic pump, system operate hydraulic cylinders on mast,
hydraulic jacks, hydraulic pipe tong, and hyraulic winch. Control
valves, hydraulic oil tank, filters, pipes, hydraulic and air valve
connections, fittings.

Air system : Compressor (engine drive), air tank, relief valves,
air dryer, gauges, all clutches

Electrical lighting system : All the electrical equipments on the mast, and
substructure are ex-proof type

Instrumentation :
Driller control panel, weight indicator, gauges, air valves, cables,
hoses, fittings, transducers, paint

Price & terms : Please enquire using the email form below. If you cannot find the
vessel, crane, rig or equipment that you need, please send us an email to
mail@worldoils.com stating your requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------
Search words(for official use only) -
New UMD 160 Drilling Rig For Sale in Europe
UMD 160 Semi Mobile Drilling Rig For Sale
New Semi Mobile Drilling Rigs
Land Drilling Rigs For Sale
Land Rig Builders in Europe Land Rigs in Turkey
Drilling Rig Builders in Turkey
Rig Builders in Europe
New Land Drilling Rig
-------------------------------------------------------------------------

UMD 160 New Land Drilling Rig - For Sale in Europe

ID 596

Worldoils Marketplace

Worldrigs ID: WR1868

Offshore Support Vessel for sale
Offshore Support Vessel - 2008 Built for Sale

Description :

Type : Offshore Support Vessel
Dimensions : Loa : 55m / B:13,8m / D:5,5m
Class : ABS
Build : 2008built
Accom / Pax : 24 men accomodation
Machinery : Main Engines : 2 x Nigaata 6MG25HX (3600HP)
Deck : Clear deck area : 29m x 11.4m = 330.6m2
Capacities : Fuel Oil : 340M3 Fresh Water : 550M3
Location : South East Asia

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------------------------
Search words (for official use only) -
2008 Built Offshore Support Vessel for sale
Offshore Support Vessel - 55m for Sale
55m Offshore Support Vessel for sale
Offshore Support Vessel for sale in Asia
24 Men Accomodation Offshore Support Vessel
---------------------------------------------------------------------------------------------------

Offshore Support Vessel - 2008 Built for Sale

ID 1868

Worldoils Marketplace

Worldrigs ID: WR860

Landing Craft for sale
600Ton Pax/ferry/landing craft
Landing Craft - 600Tons - For sale

Description
Landing craft
Day Pox/car ferry, open type.
Dwt 600 tons
Dimensions : 69,79 x 17.30 metersx 2.64 m depth.
Built 1974 , rebuilt 1990 perama,piraeus , greece.

Gross/nett : 728/215
Bow ramp
Max loaded draft : 2.3 meters.
Height of garage : 4,2 meters.
Tons per wheel : 5 tons

Main Engines : 2 x caterpillar type d 343 with ttl hp 730
Service speed 9 knots
Gensets : 2 x 60 kva caterpilar
Pax capacity : 300
Go tank capacity : 45 tons
Fw tank capacity : 20 tons

Last dry dock 07/2011

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------
Search words(for official use only) -
Landing Craft for sale
Ferry/landing Craft
Pax/Ferry/LCT For Sale
600Ton Pax/ferry/landing craft
600Ton landing Craft For Sale
600Ton pax ferry for sale
---------------------------------------------

Landing Craft - 600Tons - For sale

ID 860

Worldoils Marketplace

Worldrigs ID: WR1426

Versa Drilling Rig for Sale
2003 Built Drilling Rig for Sale in USA

Description:

2003 Versa Drilling Rig
490 HP water well drilling rig

Compressor: Ingersoll Rand 900/350.
Eng: PTO.
Mounted on: 2002 Kimble Carrier.
Eng: Cat C-15 490 HP

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------------
Search words (for official use only) :
2003 Built Versa Drilling Rig for Sale in USA
490 HP Water Well Drilling Rig
Versa Drilling Rig for Sale
2003 Built Water Well Drilling Rig
---------------------------------------------------------------------------------------------------------------

2003 Built Versa Drilling Rig for Sale

ID 1426

225 feet Self-Propelled Split Hopper Barges

Worldoils Marketplace

Worldrigs ID: WR1283

Self-Propelled Split Hopper Barge for sale
2001 built Self-Propelled Split Hopper Barge for sale
68.43m Self-Propelled Split Hopper Barge
1000cbm Capacity Self-Propelled Split Hopper Barges

Principal Dimensions and Characteristics
Year built : 2001
LOA : 68.43 m
Beam : 13.70 m
Depth : 4.30 m
Design draft : 3.20 m
GRT/NRT : 949/375
Number of hoppers : 8 each (4 on each side)
Hopper capacity : 1,000 cubic meters

Tank Capacities
Fuel oil : 14,000 liters
Fresh water : 35,000 liters
Hydraulic oil : 750 liters

Accomodation
Number of crew : 12

Machinery
Make/Model : Caterpillar/ D343 TA
Power : 259 kW x 2

Electro Hydraulic System
Make/Model : DAF/DA475
Power : 52 kW

Auxiliary Equipment
Make/Model : Nissan/SD-22 (4 cylinder)

Propulsion
Make/Model : Schottel/NV365/SRP265
Propellers : x 2 each
Diameter : 1,350 mm

Fire Fighting Appliances
M. Foam : 3 x 9 liters
Water CO2 : 3 x 9 liters
DCP : 2 x 5 Kgs.
Fire buckets : 6 each

Life Saving Appliances
Life raft : 1 x 20 persons
Life buoys : 4 (2 with line and ignition light)
Life jackets : 20 nos.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
--------------------------------------------------------------------------------------------------------
Search words (for official use only) -
Self-Propelled Split Hopper Barge for sale
1000cbm Capacity Self-Propelled Split Hopper Barges
Self-Propelled Split Hopper Barges - 1000cbm capacity for sale
225 feet Self-Propelled Split Hopper Barges
2001 built Self-Propelled Split Hopper Barge for sale
68.43m Self-Propelled Split Hopper Barge
Used Self-Propelled Split Hopper Barges for sale
-------------------------------------------------------------------------------------------------------

Self-Propelled Split Hopper Barge for sale

ID 1283

Worldoils Marketplace

Caterpillar 14G Motorgrader - 1980 Built For Sale

ID 540

Worldoils Marketplace

Worldrigs ID: WR1875

Supply Vessel for Sale
Supply Vessel - 1977 Built for Sale

Description :

Type : Supply Vessel
Dimensions : 42.43m x 11m x 3.43m 2.6m draft
Class : BV
Build : 1977
Accom / Pax : 48 person
Machinery : 2xStork Werkspoor 6FD240 / ttl : 2,170 bhp
Speed : 11 Knots Cruising
Deck :
Clear Deck Space: 160m Windlass: Double Drum Fitted Anchors: 2x750kgs
Deck Crane: 35 Tons Telescopic BUCYRUS-ERIE Cargo Crane: 2.45 Tons
HMF Marine Telescopic Crane

Capacities :
Fuel Oil: 140m.t@88% 160m.t.@99% Fresh Water: 199.5 m.t. in 8 Epoxy Coated Tanks
Deck Cargo/Deck Loading: 120 m.t. 3 Tons per m Ballast Water: 24.6 m.t.

Location : UAE
Others : For sale 42.43m x 11m x 3.43m 2.6m draft 1977 built 2,170 bhp

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

------------------------------------------------------------------------------------------------------
Search words (for official use only) -
1977 Built Supply Vessel for Sale
48 person Accomodation Capacity Supply Vessel
Supply Vessel - 42.43m for sale
Supply Vessel for Sale in UAE
Offshore Supply Vessel for Sale
------------------------------------------------------------------------------------------------------

Supply Vessel - 1977 Built for Sale

ID 1875

375 HP Four Axle Carrier Mounted Workover Rig

Worldoils Marketplace

Worldrigs ID: WR397

Workover Rig - 375 HP - Four Axle Carrier Mounted
Carrier Mounted Workover Rig For Sale

4 Axle carrier 96' 180,000# Derrick
Detroit series 60 Tier II 12.7 L
4500 OFS Allison transmission
Drawworks with disc assist, 375 hp right angle gear box
38x10-38x8 Double drum
Hydraulic raised and scoped
4 Hydraulic leveling jacks
Derrick boards fully automatic
Front end -20,OOO#EACH/40,000#
Rear end -23,000#EACH/46,000#
25,000# TAG~LE
Front tire size 38565R22.5
Rear tire size 11R22.5

10% down payment required before coverting to a final invoice before paint.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

------------------------------------------------------------------------------
Search words :
Workover rig in USA for Sale
American workover rigs for sale
Used American Rigs for Sale
Carrier Mounted Workover Rigs for sale
Used Workover Rigs for Sale
Good and Used Workover rigs
------------------------------------------------------------------------------

Workover Rig - Four Axle Carrier Mounted - 375 HP - for sale

ID 397

Newbuild High Speed Military Patrol Boat for Sale

Worldoils Marketplace

Worldrigs ID: WR750

Military Patrol Boats for Sale
Newbuild High Speed Military Boats
19M New Fast Military Patrol Boats For Sale
Fast Military Patrol Boats for sale - 50 knots

Technical data :
LOA : 19.50 m
Beam (max.) : 5.09 m
Depth : 2.735 m
Draft : 1.00 m
Displacement (full load) : 25.3 tonnes
Hull material : GRP

Boat type : mono-hull deep-V & stepped hull
Cruising range : 250 nautical miles
Max. speed : 50 knots
Propulsion : 2 X ASD14
Engine : 2 X MAN2862LE423V12/1140hp
Gearbox : MGX-6599SC

Power system :
Engine : 2xan2862LE423 V12-1550/1140kW/2300r/min
Gear box : 2xMGX-6599SC
Flexible shaft control unit
Hydraulic control system
Engine speed indicator

Oil pressure gauge
Water thermometer
Voltmeter
Ammeter
Fuel consumption indicator
Tiller telltale

Anchor gear :
Electronic anchor : 1x maxwell HR3500
Electrical windlass
Max high holding power anchor

Towing & mooring units :
Stainless steel mooring unit
Mooring cleat
Ridding bitt
Side chock
Three standatd braided polyester nylon rope
Nylon whip line
Sliver marine fender

Control sytem :
Control system
Main bridge
Turret bridhe
Steering wheel
Electric flexible shaft control unit
Hydraulic system
Auxiliary engine
Disc surface propeller control unit

Survival & fire fighting apparatus :
Lifeline : 2x30 m
Life vest : 15
Inflatable fender : 1xVF-B-15
Parachute distress rocket signal
Red hand flare
Orange smoke signal

Cabin insulation system :
Extra-fine glass wool thermal-protective coating
Fire-proof insulation spacer layer

Deck fitting features :
Deck fittings
Stainless steel railing
Flagpole
Stern light pole
Stainless steel handrail
Weather-tight single door
Engine cabin shutter
Wheelhouse multi-functional skylight
Galley/toilet multi-functional skylight
Crew lounge multi-functional skyligh

Cabin features :
Bridge
Chart table
Tool box
Twin soft damping seat
Single bed in rest room : 2
Bed stand
Office table
Fixed backrest chair
Cabinet
Dish washing pool
Induction cooker
Patented toilet device

Power system :
Engine : 2xan2862LE423 V12-1550/1140KW/2300r/min
Gear box : 2xMGX-6599SC
Flexible shaft control unit
Hydraulic control system
Engine speed indicator
Oil pressure gauge
Water thermometer
Voltmeter
Ammeter
Fuel consumption indicator
Tiller telltale

Electrical & electric system :
Generator : 1xkoher 11EF02D/11 kW, 220V/50 hz
Distribution panel
Air conditioner : 2xOC-18F/1800Btu/h
Sea water pump : OC-PSWS 400E
Sea water filter : OC-ST1-1/2
Pump controler : OC-SWCB
Fan-coil unit
Cabin heat insulation

Lighting system :
Cabin lighting : fluorescent lamp
Instrument lighting
Engine-room lighting : incandescent lamp

Communication system :
VHF wireless telephone : 1xIC-304
Talkie and walkie
Internal & external broadcast system

Navigation system :
Radar : raymarine C120W-RD424D
LCD screen(GPS+sea chart+detector) : 1x12’
Magnetic compass : A154+A130
Military binoculars

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------------
Search words (for official use only) -
Military Patrol Boats for Sale
High Speed Military Patrol Boats for sale
19M Military Patrol Boats for Sale
New Military Patrol Boats for Sale
New High Speed Military Patrol Boats
19M Military Patrols Boats for Sale - 50 knots
Newbuild 50 knots Military Patrol Boats
----------------------------------------------------------------------------------------------------------------

Military Patrol Boats - New built - 19 M - For Sale

ID 750

Worldoils Marketplace

Grove RT528C - 1995 built For Sale

ID 542

Worldoils Marketplace

Worldrigs ID: WR252

Accommodation Work Barge For Charter
Accommodation Work Barge for Sale

Principal Particulars :

Class : American Bureau of Shipping

Classification : *A1 Barge, Accommodation & Work Barge

Built to MODU Code

Year Built : 2010
GRT/NRT : 5800 / 1400 (Approximate)

Length : 100.00m

Depth Moulded : 6.50m

Draft (Design) : 5.00m

Open Deck Space : 1728sqm

Timbered Covered Deck : 1484 sqm

Covered Work Area : 135 sqm

Fuel Oil Tank : 1000kl minimum

Portable Water : 1000kl minimum

Helicopter Deck : Suitable for Sikorsky S91

Equipment & Machinery :

Mooring System :
8-point mooring system : 4 x double drum

AMHOIST AM77EF diesel driven winches

c/w spooling devices and tension meters

- Anchors : 8 x 10Te High Power Anchors
(Double Flipper Delta)

- Wire : 1.5” diameter – 900m each drum

Generators : 3 x 560 kW 440/3/50

Emergency Generator : 1 x 320 kW 440/3/50

Water Maker : 2 units RO each producing 50Te per day

Pumps : Fresh Water : 2 x 45cbm/hr @ 35m head

Fuel Transfer : 2 x 45cbm/hr @ 45m head

Fire/GS : 2 x 150cbm/hr @ 80m head

Ballast/Bilge : 2 x 500cbm/hr at 30m head

Air Compressor : 2 x lngersoll Rand 830cfm – 145 psig

Crane : Pedestal mounted – AMCLYDE Unit Mariner

Model 35000 – Lifting capacity 70Te at 15m

Radius, 150 ft boom, 30ft above deck

Auxiliary Crane : 10Te at 30ft radius

Workshop Equipment :
Lathe, Drill Press, Hacksaws, Grinders

Electric Threader – ½, ¾, 1½ & 2” NPT

Fork Lift : 3Te Trolley Type

Accomodation :

Boat Deck : 36 x 4-men = 144 men

Control Deck :
16 x 2-men = 32 men

8 x 1-man = 8 men

Accomodation Deck :
34 x 2-men = 68 men

4 x 4 men = 16 men

Total : 268 men

Conference Room : 1 unit at Control Deck

Offices : 4 units at Control Deck

Recreation Room = 1 unit TV Room & 1 unit Recreation Room

Hospital = 1 unit with 3 beds

Mess Rooms = 2 units – 1 Officer & 1 Crew Mess rooms

Prayer Room = 1 unit on Boat Deck

Communication System & Navigation Aids :

GMDSS : 1 set

Intercom / PA System : 1 set (MODU Code)

Handy Talkie : 6 sets

Ground to Air Radio : 1 x Helicopter Communication System

Wind Speed Transmitter : 1 x Wind Speed & Direction Transmitter

General Alarm System : 1 x General Alarm System

Radar : 1 unit

Echo Sounder : 1 unit

GPS : 1 unit

Fire Fighting & Survivial Equipment :

Fire Pump & Monitor :
2 units Foam & 2 units water monitors

3000 LPM @ 10 bars

Smoke Detectors : 1 unit per 180 sqft of accommodation space

Fire Extinguishers : As per SOLAS/MODU Code requirement

Life Rafts : As per SOLAS/MODU Code requirement

Life Jackets : As per SOLAS/MODU Code requirement

Ring Buoys : 25 units

Life Boats :
4 units 70 men totally enclosed lifeboats

(2 units on each side)

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------------
Search words :
Accommodation Barge for Charter
Work Barge for Charter
Accommodation Barge for Sale
Work Barge for Sale
Accommodation work barge with crane for charter
Accommodation work barge with crane for sale
Offshore work barge with crane for charter
Offshore work barge with crane for sale
-------------------------------------------------------------------------------------------------

Accommodation Work Barge for Charter or sale

ID 252

IDECO H 44 MODEL 750 HP 6 axle Trailer mounted Rig

Worldoils Marketplace

Worldrigs ID: WR1143

Ideco H 44 Model 750 HP 6 axle Trailer mounted Rig for sale
Used Trailer Mounted Rig for Sale
750hp Ideco Trailer Mounted Rig

Specifications

Engines : Two Detroit Diesel Series 60 set to 550 HP ea. Electric starting.
Transmission : CLBT 5860Allison
Mast : 117 ft, 350.000 Lbs
Crown Protection : Crown o matic

Drawworks :
- 42” x 12”
- Drill line size 1-1/8”.
- Mechanically Driven.
- Equipped with auxiliary brake, emergency brake and inner circulation water
- Cooling system

Sand Line :
- 42” x 8-1/2”
- Line size 9/16”

Hydromantic : Parmac 202
Hydraulic Winch : 10.000 Lbs capacity
Date of last refurbished : 02/10/2011

Engine and Transmission :
• Installation of two new Detroit Diesel Series 60 Engines
• Maintenance of automatic transmission

Drawworks and Sandline :
• Replacement of brake blocks
• Change of : Chains, bearings and retainers

Other Components :
• General maintenance to hydro brake
• General maintenance to right gear angle box
• Maintenance to brake system of the carrier
• General maintenance on Winch

Mast :
• Replacement of crown sheaves bearings
• Maintenance of telescopic cylinders
• Sandblasting, inspection and paint
• Maintenance to lighting system

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------------------------------------------
Search words (for official use only) :
IDECO H 44 MODEL 750 HP 6 axle Trailer mounted Rig for sale
750hp Ideco Trailer Mounted land Rig For Sale
Used Trailer Mounted Drilling Rig for Sale
750hp Land Rig Dealers
Used ElectricalTrailer Drilling Rig for Sale
750HP Drilling Rig for Sale - Electrical Trailer
Drilling Land Rig for Sale - 750HP
Used IDECO H 44 MODEL 750 HP 6 axle Trailer mounted
750hp Land Rig Builders
--------------------------------------------------------------------------------------

Ideco H 44 Model - 750 HP 6 axle Trailer mounted Rig for Sale

ID 1143

Accommodation Barge - 250 men - 1976 Built for Sale

ID 1334

Self Propelled Oil Barge - 120 KL - For Sale

Worldoils Marketplace

Self Propelled Oil Barge - 120 KL - For Sale

ID 2675

Worldoils Marketplace

Worldrigs ID: WR690

Tugboat for Sale
1000hp Tugboat For Sale
1996 built Tugboat for Sale

General
Year Built : 1996
Class : GL

Length O. A : 21.50 M
Breadth : 7.30 M
Depth : 3.50 M
GRT / NRT : 139 / 42

Main Engine :
2 X 375KW Cummins – KTA 19M @1800 RPM

F.O. : 94.5 M3 (approx)
F.W. : 30 M3 (approx)

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
------------------------------------------------------------------------------------------
Search words(for official use only) -
Tugboat for sale in Singapore
1000HP - 1996 built Tugboat for sale
Used Tugboat for sale in Asia
Tugboat for sale
1000HP Tugboat for sale
1996 built Tugboat for sale
------------------------------------------------------------------------------------------

Tugboat - 1000 hp - for sale

ID 690

Worldoils Marketplace

Worldrigs ID: WR1366

NGL, LPG Storage Bullet Tank for Sale
1955 Built - 30,000 Gallon NGL Storage Tanks for Sale
Used ACF LPG Tank for Sale

Description
Quantity : 1
Manufacturer : ACF
Year : 1955
Dimensions : 122" OD x 50' OAL
Pressure : 250 psi
Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

------------------------------------------------------------------------------------------------------------------------------------
Search words(for official use only) :
NGL, LPG Storage Bullet Tank for sale
1955 Built LPG Storage Tanks for Sale
Used ACF NGL Bullet Tank for Sale
Liquefied Petroleum Gas Storage Tank for Sale
30,000 Gallon Capacity NGL, LPG Storage Bullet Tank for Sale
ACF LPG Tank for Sale - 1955 Built
Used 30,000 Gallon NGL Storage Bullet Tank for Sale
-------------------------------------------------------------------------------------------------------------------------------------

30,000 Gallon NGL, LPG Storage Bullet Tank for Sale

ID 1366

Worldoils Marketplace

Worldrigs ID: WR676

Mechanical Trailer Mounted Drilling Rig for Sale
Land Drilling Rig for Sale - 1000 HP Mechanical Trailer
1000 HP Trailer drilling rig for sale
1000HP - Mechanical Trailer Package

The 1000 H.P. Trailer Rig Package is designed to meet the demands of our customers for today’s competitive market. We pride ourselves on doing the little things necessary that it takes to supply our customers with the latest innovative technology. When designing rig packages we try to meet three simple goals. All rig components must :
1. Operate Properly.
2. Rig up quickly.
3. Transport in the fewest loads possible.

Using these principles, we have designed this rig package to meet and exceed all of our customers needs.

I. Hoisting Equipment
i. Mobile drilling trailer mounted type 1000HP, with single drum drawworks, two Detroit series 60 14.0 liter engines with two Allison S6610H transmissions with hydraulic torque converter. Mast height 118 ft., load capacity-425,000 lbs. (210 ton API). Rig mounted on a 4-axle chassis.

A. Group I. Basic Rig
a. Drawworks – OEM-1000
i. Disc Brake System – Two (2) 60” O.D. x 4” Thick water cooled disc: Four (4) brake calipers w/park feature, each caliper can develop 48,000 ft-lbs @ 100 psi. Maximum 900 rpm calipers have a park feature rated @ 28,000 ft-lbs each. Manufacturer = Kobelt
ii. Air Clutch – Two (2) 30” diameter friction disc, slip torque rating 54,500 ft-lbs @ 100 psi, maximum 760 rpm, 1664 sq in lining area. Manufacturer = Witchita.
iii. Drum 24” O.D. x 40” length with Lebus groove system
iv. Centralized Lubrication System
v. Drill line Diameter-1 1/8”
vi. Drive Chain - Four-strand, 1 ½” pitch
vii.Total Disc Brake Area - 1680 sq. inches

b. Auxilary Brake
i. Air Operated : Water Cooled Disc with copper alloy wear plates, mounted to frame, coupled directly to drum shaft. Two (2) 36” Disc rated @75,000 ft-lbs @100 psi maximum 640 rpm.
ii. Size-236 or equal
iii. Maximum Pressure - 100 psi
iv. RPM-640
v. Direct Coupled Drum shaft.

c. Combined Gear Box
i. Combined right angle drawworks drive drop box with one output shaft for rotary drive and one output shaft (unused) for additional components.
     1. One input shaft with 1810 drive flange.
     2. Top right shaft - drawworks drive, air engaged 1.0 to 1 ratio keyed shaft
     3. Top lower shaft - rotary drive, air engaged 1.1489 to 1 reduction ratio keyed shaft.
     4. Bottom lower shaft – Future or additional components, opposite top lower shaft, air engaged, 0.9787 to 1 ratio (1.0217 to 1 ratio increasing), 1810 drive flange.
ii. Gear type lubrication pump mounted intermediate shaft provides positive lubrication to bearings.

d. OEM 118’-0” x 425,000# Telescoping Mast
The 118ft., mast provides is a telescoping design, manufactured in accordance with API and Drilling Structures Int’l Inc.’s strict quality control processes. The mast includes an automatically deployed racking board.
i. A telescoping derrick with open face derrick design, manufactured to API 4-F specifications. The open face design utilizes structural steel construction, which allows for maximum block clearance. Derrick includes a ladder from rig floor to crown and a block cradle with chain & hook for securing block during transport.
iii. Base Section :
a. A-leg style base section hinged to carrier frame. (2) Turnbuckles attached from bottom of derrick base to carrier frame allow for mast angle adjustment. The well-side derrick legs have manual screw jacks.

ii Specifications
Mast Height : 118’
No. of lines to Block : 8 or 10
API Operating Hook Load -
8-Lines : 340,000 lbs
10-Lines : 425,000 lbs

Drilling Line Size : 1-1/8 in.
Racking Board Height : 55ft., 58ft., 70ft.
Racking Board Capacity
5 in. Drill Pipe : 12,400 ft.

iii. Base Section :
a. A-leg style base section hinged to carrier frame. (2) Turnbuckles attached from bottom
of derrick base to carrier frame allow for mast angle adjustment. The well-side derrick
legs have manual screw jacks.

iv. Lower Section :
a. 6 in x 6 in x 3/4 in angle main legs, with 6 in x 4 in x 3/8 in rectangular tubing “back” braces. Lower section of mast hinges to top of derrick base and rests on headache rack during transport.

v. Upper Section :
a. Angle construction. 6 in x 6 in x ¾” upper legs, with 3 in x 3 in x 3/8 in “back” braces. Upper section rests inside lower section until mast is raised. Upper section then telescopes hydraulically upward from lower section and locks in place with automatic latching pins.

vi. Crown Block :
a. Crown block is set up for a 8 or 10 line string-up. Crown sheaves are grooved for 1-1/8 in. Wire line. All sheaves are mounted on tapered roller bearings with grease certs for ease of maintenance.
b. Crown includes : (1) one 30 in fast line sheave, and (4) four 24 in crossover sheaves.

vii. Racking Board :
a. The mast includes an all welded racking board. The racking board automatically deploys as the mast is extended.

viii. Derrick Raising System :
a. The derrick is designed to utilize two, 72”x 9” x 3-stage, double acting raising rams and one 50’ x 7” single-stage telescoping cylinder.

ix. Guylines :
a. Derrick includes (2) load guys from the crown to carrier and (1) set of wind guys that meet or exceed API specifications.

e. Hydraulic Catworks :
a. Hydraulic break out cylinder for breaking out pipe connections, 4 ft. stroke, maximum pull load 20,000 lbs. Installed on the mast. Includes cable, roller guides and hydraulic piping.
b. Hydraulic make up cylinder for making up pipe connections, 4 ft. stroke, maximum pull load 20,000 lbs. Installed on the mast. Includes cable, roller guides and hydraulic piping.
c. Controls are located at the operator’s console.

f. Traveling Block Limit Switch (Crown Block Saver)
a. Safety device for limiting traveling block raising. Installed at the main drum to activate the main brake when traveling block is up to a pre-determined height.

g. Deadline Anchor
a. Dead line anchor to be used with compression type weight sensor. Drum type, mounted on carrier frame in front of drawworks frame.

h. Diesel Engine
a. Two Detroit series 60 - 14.0L engines rated at 600 BHP each@ 2100 RPM’s, 6 cylinders (inline) complete with DDC electronic control system.
b. Includes : Radiator, Heavy Duty Blower, 24V starter and alternator, variable speed governor, full instrumentation (ignition switch, ddr connector, electic throttle, electronic display module), two (2) 12v batteries and spark arrestor muffler.
c. Specifications : 600 BHP @ 2100 RPM, 1650 lbs/ft @ 1100 RPM

i. Transmission
a. 5 speed (6th gear locked out), automatic, Allison S6610H or equal w/torque converter, oil cooler. Dual air/hydraulic operation. Max. capacity 850 HP, 2500 RPM, 2300 ft-lbs input.

j. Compound Gear Box
a. Compound gear box, dual input, single output, may be drive with one or both engines.
b. Two input shafts, air engaged, 1810 drive flange (engagement of either input or a combination of both)
c. Single output, 1810 drive flange, ration 1.0271 to 1 to combination gear box.
d. Gear type lubrication pump. Mounted to output shaft provides positive lubrication to bearing.

k. Power Take-off
a. Chelsea 852 XB or equal, Used for hydraulic pump drive, mounted on transmission, 95 HP @ 1000 rpm output.

l. Hydraulic System
a. Two hydraulic gear pumps, one 500 gallon hydraulic tanks with containment pan, filters, heat exchanger and sight glass. Capable of producing 50 gpm @ 3000 psi, pressure return and circulation filters with visual indicator, 3000 watts portable generator, inline flow meter, system safety release valve, circuit breaker panel for heater/valve bank, operator panel with selector switch.
b. Custom built valve bank, 15 station manifold, prewired control panel and hand held remote with the following functions :
i. Mast lower/raise
ii. Mast telescope up/down
iii. Two (2) hydraulic pilot operated directional valve and joystick for winches.
iv. Six (6) leveling jacks.
v. D.S. sub raise/lower
vi. ODS sub raise/lower
vii. Make up/Brake out tong cylinders with remote torque adjustment
viii.Flow dividers for mast raise and sub cylinders
ix. Electrical control panel, remote controls and function switches for above
x. Velocity fuses on all cylinders for fall protection

m. Air System :
a. Air system with on (1) 60 gallon receiver to provide air to main air line and brake system. Includes air lines, control valves, pressure gauges.

n. Air Compressor :
a. Air compressors with direct drive, mounted on engine.
b. Reciprocal type, 28 CFM capacity

o. Operator’s Controls :
a.   Operator’s console to include the following controls and instrumentation:
i.    Main drum brake lever
ii.   Main drum clutch controls
iii. Two engine throttles – One (1) hand and one (1) foot
iv. Shift levers for two 4-speed transmissions
v.   Two emergency engine shut downs
vi. Hydraulic pump controls
vii. Two mud pump engine regulators
viii. Mud pump engine emergency shut down
ix. Mud pump clutch controls
x.   Instrumentation Air Pressure Gauge
b. All air operated controls are located in the central part of the console and have identifying tags. Console is located to provide good visibility of traveling block, work floor and racking board.

p. Engine Emergency Shut Down :
a. One engine emergency shut down valve for emergency engine stop. Located at the operator’s console.

q. Trailer Mounted :
a. A heavy duty 4-axle trailer with air suspension and 109,000 lb. total capacity.
b. All lights and brakes are equipped for attachment to the truck
c. Spring brake chambers for safety.

r. Tires (12.00 x 22.5, Pirelli Radial) 16 each
a. All tires, disc wheels, 16 tires mounted as dual. Tire rating 109,000 lbs. total, all tires inflated to 100 psi.

s. Suspensions
a. One (1) two axle, single point bogey at rear.
b. Two single axles with air bags, air can be dumped for backing into position
c. All axles are 12.5 metric ton capacity.

t. Four Pedestals for Hydraulic Jacks
a. Pedestals under front jack for rig stability. Four pedestals require. There are to be six jacks for leveling the rig.

u. Six Hydraulic Jacks
a. Six hydraulic leveling jacks to take off the load from the axle and provide horizontal position of the rig during operation. Each jack is operated by its own controls and is equipped with screw with thrust nut, which allows relieving hydraulic pressure from he jacks during rig operation. Controls are located at the mast supports.

v. Fuel Tank
a. Mounted on the side of the chassis

w. Auxiliary Hydraulic Winch (2 winches using one for spare) :
a. Braden or equal hydraulic winch with 12,000 lbs. pull load at the first layer, 336 fpm @ 65 GPM and 2400 psi.
b. Hydraulic brake and spooler
c. Sheave is mounted on the crown

x. Rotary Table Drive
a. One rotary table drive with driveshaft and two air clutches(one for rotary on and off, second for emergency shut down)
b. Controls are located at the operator’s console

y. Rotary Table Drive Chain Gear Box :
a. Includes three oil-greased shafts inside full-length guard, complete with sprockets, flanges, chains and chain gear-box with one shaft to connect to rotary table. One lower section mounted on the trailer, one upper section mounted on the sub and one flanged driveline between.

Group II
A. OEM Hydraulically Telescoping 17-425 Substructure
1) Material and labor to fabricate one (1) OEM hydraulic telescoping 17-425 substructure as per the following :
i. Hydraulic Telescoping Substructure with :
- 425,000# Rotary beams
- 300,000# Setback.
- Clear height under rotary beams = 14’
- Transportation height 12’-6”
- Base dimensions 45’L x 12’-6”W
- Working floor dimensions 20’ x 26’
- Rathole and mouse hole locations
- Two tong backup posts
- Removable braces in cellar area.
- Provisions for attaching mast support beam.
- Supply and installation of four (4) hydraulic scoping cylinders.
- Pull out post for guy wires to front of mast.
- Removable flooring around rotary table area.
- B.O.P. Dolly and tracking.
The above substructure to be fabricated under A.P.I. 4F guidelines. Upon completion, substructure to be tagged with OEM A.P.I. 4F nameplate.

B. Mud Boat :
i. Material and labor to fabricate one (1) mud boat. Mud boat complete with :
1. Supports under jacks on carrier.
2. Pipe guides for tires
3. Pin connections to mast support beam.
4. Loading hitches on one end

C. Mast Support Beam/Brake Water Tank/Trip Tank Combo
i. Material and labor to fabricate one (1) mast support beam/trip tank/brake water tank combination. Combination complete with :
1. Brake Water Tank - Material and labor to fabricate one (1) break water tank. Tank to be enclosed for rig up winterization.
a. Tank to have the following :
i. Tank bottoms to be 3/8” plate.
ii. Tanks constructed with ¼” v-crimp.
iii. Tank rims to be 4” square tubing.
iv. Access ladder
v. Man way
vi. Tong buckets, guides, and safety cage.
vii. Supply and installation of :
1. Two (2) 2 x 3 centrifugal pumps
2. Heat exchanger

2. Trip Tank – Material and labor to fabricate one (1) trip tank. Tank to be enclosed for rig up winterization.
a. Tank to have the following:
i. Tank bottoms to be 3/8” plate.
ii. Tanks constructed with ¼” v-crimp.
iii. Tank rims to be 4” square tubing.
iv. Access ladder
v. Man way
vi. Tong buckets, guides, and safety cage.
vii. Provisions to mount:
1. One (1) 2 x 3 centrifugal pumps

3. Mast Support Beam – Material and labor to fabricate one (1) three runner mast support beam.
a. Support beam complete with:
i. Supports for carrier jacks and bottom base of mast.
ii. Loading hitches on both ends for tailboarding.

D. Rig Floor Stairways – All stairs to meet OSHA standards with no slip grip strut stair treads.
i. Three (3) 17’-0” stairway from substructure floor to ground level. Stairs to be built on a 45-degree angle.
ii. One (1) 9’-6” stairway from top of the substructure to top of mud tank. Stairs to be built on a 45 degree angle.

E. V-Door Ramp - Ramp to be fabricated to work with a 17-0” floor height substructure and an 18” catwalk. Ramp to be fabricated with ½” plate and 3” pipe guides.

F. Catwalk – One 50’ x 5’-0” x 18” catwalk with snatch post mounted on one end.

G. Doghouse - House to be fabricated on a three-runner oilfield type skid with loading hitches on both ends for tailboarding. House to have checker plated flooring, v-crimped wall construction, and an arched type roof. House complete with the following :
1. 4’-0” porch on one ends
2. 2’-0” walkway on the back side of the doghouse running to full length.
3. Handrails around house perimeter.
4. One sliding doorway to rig side.
5. One swing type doorways on both ends with windows built in.
6. Two (2) windows on the back side wall
7. Knowledge box
8. Three compartment workbench.

Group III - Prime Mover Drive
A. Lighting System –Heavy Duty explosion proof Fluorescent and Mercury Vapor Lightning System designed to use with Mast and Substructure, Mud System, complete with Plug, Receptacles, Cable, Cable Clamps and all necessary Leads and fitting. Lighting System consist of: Mast and Racking Platform, Substructure Lighting, Mud Tanks and Mud Pumps, and Utility House, including Battery emergency light at Driller’s console certified for Class 1 Division 2.

B. Engine/Generator/Part/Change Package
a. Utility House - “New” - Material and labor to fabricate one (1) utility house. House (43’x 12’ x 9’) to be constructed on an oilfield type skid (45’x 12’x 18”) with loading hitches on both ends for tailboarding. Top of skid covered with ¼” checker plate.
i. Parts/change house to be complete with :
1. Twenty (20) lockers.
2. Changing bench near lockers.
3. Two sets of shelves on each wall running 8’-0”.
4. One (1) bench on each wall. Bench compartments to be 5’-0” with folding bench. Two compartments to have ventilation to the outside for paint storage.

ii. Generator house complete with :
1. One (1) 8’-0” sliding door on side of the generator location
2. Provisions for mounting one (1) electrical plug panel.
3. Radiator end of skid left open.
4. Skid designed for generator tie downs to be mounted on cross beams of skid for safety.

b. Generator – Two (2) Detroit 60 Series 14L.

c. Electrical Specifications
i. Item 1 – Clarification
1. Prime mover specifications were not provided; IEC Systems assumes the engine and generator sizes as listed in this proposal.
2. The generator house will be designed to accommodate the “Three Tank Drilling Rig Standard” and thus be interchangeable with all rigs that meet the standard
3. IEC System proposal is based on performing the installation in Houston, Texas. All components listed below will be installed and tested
4. Customer will furnish the voltage regulator and voltage rheostat

ii. Item 2 – Generator Houston Electrical System For a Mechanical Rig
1. Generator House 480 VAC Switchboard
   a. 1 ea - A/C Generator Control Panel by IEC Systems for the control of two (2), 450 kW, 480 volt, 3 phase, 4-wire, 60 Hertz, A/C generators.
   b. Switchgear to contain full instrumentation and will not be designed for full parallel operation of generators.
   c. Switchboard will be NEMA Type 1 enclosure with ASA #61 gray enamel finish, designed to meet NEMA and OSHA specifications.
   d. All nameplates will be constructed of plastic plates, black on white for names and red on white for warnings.

GENERATOR CONTROLS MOUNTED IN THE SWITCHGEAR WILL CONSIST OF:
2 - Generator Main Circuit Breakers (Gen PWR)
2 - Generator "Power Available" Indicating Lights
2 - Voltmeters
2 - Voltmeter Switches
2 - Ammeters
2 - Ammeter Switches
2 - Frequency Meters
2 - Reverse Power Relays
1 - Ground Detection System
2 - Governor Control Switches
2 - Wire to Customer Furnished Voltage Regulators
2 - Wire to Customer Furnished Voltage Rheostats
1 - Lot Current Transformers, Potential Transformers, Fuse Blocks, Fuses, Buss Bar, Switchboard Wiring, and related equipment

Switchboard will be fully assembled, wired, and shop tested.

2. Generator House 480V Motor Control Center (MCC)
a. 1 ea - 480 Volt, 3-phase, 60 Hertz A/C Motor Control Center, equipped with braced horizontal and vertical bus
b. Enclosure will be NEMA Type 1 with front only access
c. Motor starters will be combination, full voltage- non-reversing with 3-pole overload blocks, heaters, control power transformer, operating handle, fuses and start/stop controls in cover with red "RUN" indicating lights
d. 480V MCC Motor Starters

i. Five (5) Size 4 Starters for :
   1 ea 60 HP Mud Mixer 1
   1 ea 60 HP Mud Mixer 2
   1 ea 60 HP Desander
   1 ea 60 HP Desilter
   1 ea Spare

ii. One (1) Size 3 Starter for:
    1 ea 40 HP Trip Tank

iii. Five (5) Size 2 Starters for:
   1 ea 20 HP Drill Water 1
   1 ea 20 HP Drill Water 2
   1 ea 25 HP Brake Cooling Pump 1
   1 ea 25 HP Brake Cooling Pump 2
   1 ea Spare

iv. 480 V MCC Motor Feeder Circuit Breaker
1. 1 ea - 150 AMP 3 Pole Circuit Breaker for Camp Feeder

3. Generator House 480V Distribution Panel Boards
a. 1 ea - 480V POWER DISTRIBUTION PANEL BOARD (P1)
i. 480V, 3-Phase, 3-Wire
ii. NEMA 1 Enclosure
iii. 600A MLO with Feed-Thru Lugs
iv. 36 CKT with branch Circuit Breakers for the following loads:
     a. 1 ea - 100A/3-Phase CB for 75 KVA Lighting Transformer
     b. 1 ea - 60A/3-Phase CB for BOP Accumulator (30 HP)
     c. 1 ea - 60A/3-Phase CB for Spare
     d. 1 ea - 30A/3-Phase CB for Agitators 1, 2 Feeder (10 HP each)
     e. 1 ea - 30A/3-Phase CB for BOP House Heater (15 kW)
     f. 1 ea - 30A/3-Phase CB for Change House Heater (15 kW)
     g. 1 ea - 15A/3-Phase CB for Liner Washer 1 (3 HP)
     h. 1 ea - 15A/3-Phase CB for Liner Washer 2 (3 HP)
     i. 1 ea - 20A/3-Phase CB for Fuel Pumps 1 & 2 Feeder (3 HP each)
     j. 1 ea - 20A/3-Phase CB for Shale Shaker 1 & 2 Feeder (5 HP each)
     k. 1 ea - 30A/3-Phase CB for Spare
     l. 1 ea - 30A/3-Phase CB for Wireline (15 HP)

b. 1 ea - 480V DISTRIBUTION PANEL BOARD (P2)
i. 480V, 3-Phase, 3-Wire
ii. NEMA 1 Enclosure
iii. 600A MLO with Feed-Thru Lugs
iv. 30 CKT with branch Circuit Breakers for the following loads:
     1. 1 ea   100A/3-Phase CB for Hydraulic Power Unit (HPU), (50 HP)
     2. 1 ea   100A/3-Phase CB for Air Compressors #1 & 2 (25 HP each)
     3. 1 ea   20A/3-Phase CB for Vacuum Degasser (7.5 HP)
     4. 1 ea   30A/3-Phase CB for Dog House Heater (15 kW)
     5. 1 ea   60A/3-Phase CB for Agitators 3, 4, 5 Feeder (10 HP each)
     6. 1 ea   30A/3-Phase CB for Hopper House Heater (15 kW)
     7. 1 ea   40A/3-Phase CB for Spare
     8. 1 ea   60A/3-Phase CB for Spare
     9. 1 ea   30A/3-Phase CB for Spare
     10.1 ea 30A/3-Phase CB for Spare

4. Generator House 120/208 Distribution Panel Board
a. 1 ea - 120/208V DISTRIBUTION PANEL BOARD (P3)
i. 120/208V, 3-Phase, 4-Wire
ii. NEMA 1 Enclosure
iii. 225 MLO, Top Feed
iv. 42 CKT with branch (124/240V-10 KAIC) Circuit Breakers for the following loads:
     1. 1 ea -   100A/3-Phase CB for Rig Floor Lighting Panel
     2. 1 ea -   100A/3-Phase CB for Spare
     3. 1 ea -   100A/3-Phase CB for Boiler House Feeder
     4. 1 ea -   60A/3-Phase CB for Spare
     5. 1 ea -   30A/3-Phase CB for Spare
     6. 10 ea - 20A/1-Phase CBs for Lighting Circuits 1 thru 10
     7. 1 ea    20A/1-Phase CBs for Engine/Generator House Steam Heater Blowers
     8. 1 ea    20A/1-Phase CBs for Trip & Shaker Tank Steam Heater Blowers
     9. 1 ea    20A/1-Phase CBs for Mud Pump 1 & 2 Steam Heater Blowers
     10. 1 ea 20A/1-Phase CBs for Mixer Skid Steam Heater Blowers
     11. 1 ea 20A/1-Phase CBs for Engine/Generator House Lighting Circuit
     12. 1 ea 20A/1-Phase CBs for Generator 1 & 2 Block Heater Feeders

5. Generator House Plug Board
a. 1 ea Metal shroud protected weatherproof receptacle panel with matching plugs for all the above starters and circuits having cables that exit the Generator House.
b. Receptacles to have protective vapor proof caps. Plugs and receptacles will be permanently identified.
c. 480V Plug and Receptacle sets provided for the plug board include all loads listed above in Section C and D (MCC and Panel Board Loads)
d. Additional Plug Board Spare Plugs and Receptacles
    6 ea   30A, 3-Pole, 480V
    5 ea   60A, 3-Pole, 480V
    2 ea   100A, 3-Pole, 480V

6. Generator House 480/208-120V Rig Lighting Transformer
a. 1 ea 75 KVA Transformer with 480V Primary and 120/208V Secondary mounted in a drip-proof enclosure. Primary Power will be from the P1 Panel Board.

7. Generator House Power and Control Cabling
a. 1 lot A/C Power and Control Wiring by IEC Systems to connect two 450 KW, 480 volt, 60 Hertz A/C generators to 480V Switchboard
b. All A/C generator power cables with 90°C rates insulation sized/de-rated for use in 45°C ambient atmosphere.
c. 1 lot Glastic Plates to prevent excessive heat caused by electrical fields where power cables enter generators.
d. 1 lot A/C Power and Control Wiring to connect A/C generator control panel to:
i. MCC
     1. P1 Panel Board
     2. P2 Panel Board
     3. P3 Panel Board
     4. 75 KVA Lighting Transformer
     5. Generator House Plug Board (receptacles)

8. Generator House Lighting
a. Generator Sheds Lighting receptacle string complete with plugs and receptacles, cable, cable clamps, and all necessary leads and fittings to accommodate the following :
i. 4 ea - C1D2 Hazardous Area fluorescent fixtures complete with lead
ii. 1 ea - C1D2 Hazardous Area Metal Halide floodlight fixture complete with lead
iii. 1 ea - Mounting Stanchions for Floodlights

Group IV - Rotating Equipment
B. “New” American Block Traveling Block and Hook
a. 250 Ton Traveling Block, API load rating: 250 Ton, sheave groove 1 1/8”.

C. “Rebuilt” National C275 Rotary Table and Accessories
a. 27 ½” rotary table with 27 ½” table opening, static load capacity : 650 ton, gear ratio 3.6 : 1, torque cap : 30,000 ft-lbs @ 60 rpm.

D. “Rebuilt’ Rotary Swivel
a. 250 Ton

Group V - Circulating Systems
A. Two “New” Mechanical Drive 1000HP Mud Pumps
a. Two (2) “New” Eweco - 1100HP Mud Pumps
b. Two (2) “New” Detroit D2000 Engines
c. Unitized on one common skid with:
i. Model C-300-100F(H) OWI Torque Converter
ii. Belt Drive
iii. Dual 24” Eaton Airflex
iv. Drum Hub for 24” Dual Clutch
v. Drum Flange, external 24”
vi. 5 x 6 Centrifugal pump
d. Control system including :
i. Air throttle
ii. Air valve to engage and disengage clutch
iii. Hoses and mounting hardware.

B. Two Tank 850 BBL Mud System - Material and labor to fabricate one (1) two tank 850 bbl mud system as per our discussions. OEM to completely fabricate tanks (40’ x 10’-6” x 7’-0”) on a three runner oil field type skid (50’ x 7’-10” x 8”) with loading hitches on both ends for tail boarding. Tanks to have internal ladders to each compartment, equipment supports, fold down type handrails and covered with galvanizes bar grating .Mud system to consists of the following :

i. Shaker Tank – Four equal compartments
- Shale Pit
• 10’-0’’ compartment
• One (1) cleanout
• One (1) overflow
- Desander Pit
• 10’-0 compartment
• One (1) cleanout
• One (1) overflow
• One (1) 6” suction line from 5 x 6 centrifugal pump.
• One (1) 8” equalizer. Bottom mounted with top mounted handle.
- Desilter Pit
• 10’-0’’ compartment
• One (1) cleanout
• One (1) overflow
• One (1) 6” suction line from 5 x 6 centrifugal pump.
• One (1) 18” equalizer. Bottom mounted with top mounted handle.
• Equipment supports for one (1) 10 HP agitator
- Degasser Pit
• 10’-0’’ compartment
• One (1) cleanout
• One (1) overflow
• One (1) 8” bottom equalizer and one (1) 8” top equalizer.
• Equipment supports for one (1) 10 HP agitator.
- 9’-0’’ Porch
• Able to accept two (2) 5 x 6 centrifugal pumps
• 10’’ equalizer line to Suction Tank.
• Covered with ¼’’ Chk’d floor plate.
• Overhead plated roof.

ii. Suction Tank – Two Compartments
- Suction compartment
• 30’ – 0’’ compartment
• One (1) cleanout gate.
• Two (2) 6” suction lines going to main mud pumps.
• Equipment supports for two (2) 15 HP agitators.
- Pill Compartment
• 10’-0’’ compartment.
• One (1) cleanout gate.
• One (1) 8” equalizer. Bottom mounted with top mounted handle.
• One (1) overflow
• Equipment supports for one (1) 10 HP agitator
- Porch
• Able to accept two (2) 5x6 centrifugal pumps.
• 6’’ line to both pumps
• One (1) discharge dumping line
- Pill Tank
- Suction Tank

iii. Accessories
1. Single slide for shaker. Slide to mount to the side of the tank and fold down during transportation. Slide complete with 6” pipe end for hose hook up in the field.
2. Single slide for desander. Slide to mount to the side of the tank and fold down during transportation. Slide complete with 6” pipe end for hose hook up in the field.
3. Single slide for desilter. Slide to mount to the side of the tank and fold down during transportation. Slide complete with 6” pipe end for hose hook up in the field.
4. Fold down type walkways around shaker area complete with galvanized grating and removable handrails. Walkways to fold down during transport.

iv. Solid Control Equipment
1. Four (4) Mission Magnum 6 x 5 x 11 magnum1 with a 10.5 inch impeller, mechanical seal and hard iron material, all mounted on a mission fabricated steel base with woods style coupling, OSHA type coupling guard and a 75 HP 1750 RPM, 3 PH, 230/460 Volt, 60 Hz explosion proof electric motor.
2. Three (3) Derrick DE-AG-10 Agitators complete with 10 HP, 1800 RPM explosion proof C-face motor bolted to a gear box. Including shaft stabilizer, shaft and impeller.
3. Two (2) Derrick DE-AG-15 Agitators complete with 15 HP, 1800 RPM explosion proof C-face motor bolted to a gear box. Including shaft stabilizer, shaft and impeller.
4. One (1) Derrick two cone desander.
5. One (1) Derrick sixteen cone desilter.
6. One (1) Hopper with venturi.
7. One (1) Derrick Vacuum degasser 1200 GPM. Skid mounted with heavy duty 3 HP explosion proof 230/460 volt, 60 Hz, 3 Ph, 1800 RPM motor and manual starter with heavy duty vacuum pump.
8. Two (2) Derrick Flo-Line Cleaner 503 Shale Shakers w/weir feed complete with three panel screen frame, support structure, and explosion proof electrics with the following options :
1. A.W.D. (+7 deg uphill to –1 deg downhill)
2. Standard Screen Underflow hopper
3. Weir feed
4. Super G Vibrations Motors
5. Single side tensioning system
9. 36” Poor Boy Degasser on a separate skid.

VI. BOP
A. Six (6) Station Accumilator
B. Choke & Kill Manifold
C. Note – BOP to be supplied by others (Not include in pricing.)

VII Utilities
A. Air Compressor & Receiver
a. Two (2) Gardner Denver, ST-30, Electra-Saver II, rotary screw air compressor, Model EBE99Q. 30 HP, 460 volts, 3 phase, 60 HZ, TEFC, with NEMA 4 Control Enclosure.
b. Two (2) Steel Fab, 400 gallon, vertical air receivers with full skirt, 200 psi working pressure.Part # A12614. Unit is California Coded.
c. One (1) RNC250 air dryer for 250 CFM.

VIII. Instrumentation
A. Drift Indicator
Totco Double Recording Drift 0 to 8° and 0 to 14°. Clock complete with following :
- 1 ea. Godevil Kit
- 1 ea. Chart tool & Chart Reader
- 1 ea. Tool Maintenance Box w/ Tool
- 100 ea. Chart 0 to 8° and 0 to 14°
- 10 ea. Rubber Finger Stabilizer
- Fishing Tool 7 rope sockets

B. Indicator/Gauge & Counter
EMS-2 or Equivalent Rotary Torque indicator, Weight indicator, and Tong torque gauge, Circulating pressure gauge, two (2) ea. Pump stroke counter.

C. Drilling Recorder
EMS-2 or Equivalent Drilling recorder, 9 pen (weight, torque, penetration rate, pump pressure, rotary rpm). (Diameter 103 Dan Kurang 6 Buah Printed Circuit Board).

D. PVT
EMS-2 or Equivalent Pit volume totalizer, single channel with audio alarm and warning lights, four pit transmitters totalizing relay, gain and loss gauge with gauge zero devices. Full digital instrumentations.

E. Flow-Shoe-Device
EMS-2 or Equivalent Device complete with recorder and alarm system

Group IX - Fabrications
A. Accumulator/Junk Bend/Air Package Combo
a. Material and labor to fabricate one (1) accumulator/pipe bend skid as per our conversations. OEM to fabricate a three runner oilfield type skid (40’ x 10’ x 12”)
     covered with ¼” check plate. Piping to be done during rig up. Skids complete with:
i. One (1) arched type roof and enclosure.
v. Mounting supports for two (2) vertical air receivers.
vi. Mounting supports for one (1) accumulator.
vii. Mounting supports for:
     1. Two (2) air compressors
viii. Access doors
     1. One 36” swing type door way
     2. Two (2) 48” double door way.

B. Parts/Mechanic Shop - “New”
    Material and labor to fabricate one (1) parts/change house. House (38’x 10’x 9’) to be constructed on an oilfield type skid (40’x 10’x 12”) with loading hitches on both ends for tailboarding. Top of skid covered with ¼” checker plate. House to be complete with:
     • One (1) work bench and One (1) Table
     • Two sets of shelves on each wall.
     • Four (4) storage benches.

C. 500 bbl Water Tank
Material and labor to fabricate one (1) 500 bbl water tank as per our conversation. Tanks fabricated on oilfield type skids with loading hitches on both ends for tailboarding. Skid ends to be covered with ¼” check plate. Tanks complete with the following :
- Two (2) 3 x 2 x 11 Centrifugal pumps with 25 HP Motors
- Suction and Discharge Piping.
- Two (2) ladder rung to top of tank (In and Out)
- 4” Fill cap
- 2” Outlet
- 1” Drain

D. One (1) 12,000 Gallon Fuel Tank
Material and labor to fabricate one (1) 12,000 gallon fuel tank as per our conversation. Tanks fabricated on oilfield type skids with loading hitches on both ends for tailboarding. Skid ends to be covered with ¼” check plate. Tanks complete with the following :
- Two (2) fuel transfer pumps
- One (1) filter system.
- Suction and Discharge Piping.
- Two (2) ladder rung to top of tank (In and Out)
Top and Side man ways, 4” Fill cap, 2” Outlet, and 1 ½” Drain

E. Cable Trays - Material and labor to fabricate one (1) lot of cable trays as per the following. Cable trays to be fabricated as follows :
- Two (1) 40’-0” sections from substructure to fuel tank.
- One (1) 35’-0” section from mud tanks to main trays.
- One (1) 20’-0” section from substructure to main stairs.
- Cable trays complete with the following:
     • Hinged doors in 5’-0” sections with chain for each doorway.
     • Flat expanded metal running the length of each tray.
     • ½” round bar at each end of cable tray to provide protection when pulling wires.

F. Mud Gas Seperator and Transportation Skid - “New”
- Material and labor to fabricate one (1) 36” poor boy degasser and skid. Gas buster to me mounted on a three-runner oilfield type skid with loading hitches on both ends for tailboarding. Gas buster complete with :
     • 36” Pipe with weld caps on both ends.
     • Internal baffles.
     • All piping and pipe brackets.
     • Gas buster to elevate to working condition to allow operation under half full conditions.
     • Gas buster to be mounted in lay down position for transport and to be raised by truck for operation.

Group X - Rig Up Items
A. High Pressure Piping
a. Material and labor to fabrication one (1) lot of high-pressure piping. All piping to be 4” schedule 160 and all unions to be weld type 1002. High pressure piping complete as per the following:
   i. Standpipe
    1. Standpipe to be located on the Off-Driller’s Side.
    2. Standpipe to have hammer union breaks at mast sections so it can me transported without being taken off the mast.
ii. Standpipe Manifold
    1. The standpipe manifold will be complete with manifold type tee with two 2” outlets. Outlets to have hammer union connections only.
    2. The 4” outlets to have a 4” gate valve on the top of the cross.
iii. High Pressure Line
    1. The high-pressure line will run from the bottom of the standpipe manifold to the side of the mud boat
    2. The cellar line will be mounted to the mast support beam.
    3. There will be hammer unions at break of the substructures for transportation.

B. Structural set and assemble
a. Mast and Substructure
i. Mast accessories.
ii. Install flooring, handrails, v-door, stairs, etc.

C. Set and align
a. Rotary Table
b. Drawworks
c. Doghouse
d. Utility house control panel and foot drawworks console.
e. Mud Pumps
f. Brake water/trip tank
h.Water Tank/Fuel Tank
i. Catwalks and pipe racks
j. Cable Trays
k. Koomey/Junk basket

D. Piping, Fittings, hoses, valves, etc.
a. Water Supply
   i. To Mud system and mixing system
   ii. Rig Floor
   iii. Brake water system
   iv. Feed and return lines from brake water tank to drawworks drum and brake.
   v. Fuel System
        1. To feed and return lines from duel tank to generator set.
vi. Air System
        1. Air Supply for accumulator unit and rig floor
        2. Hose connections from rig floor air manifold to drawworks control console, air hoist and other floor tools
a. To generator set engine starters
vii. Miscellaneous
       1. Vibrator hoses.
viii. Electrical Rig Up
ix. Testing
     1. Fill mud tanks with water
     2. Provide lube products to all machinery.
     3. Provide Fuel for testing
     4. Circulate water through mud system
     5. Run air compressors.
     6. Pressure test all high pressure lines and connections to working pressure
     7. Run all solids control equipment.
     8. Load test generators
     9. Test all SCR assignments.
x. Rig Down
     1. Rig down and assist in load out on customer furnished trucks.

Delivery : Seventy-five to ninety (75-90) days from receipt of purchase order and down payment.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------------------------------------------
Search words (for official use only
MechanicalTrailer Mounted Drilling Rig for Sale
1000HP Land Rig Dealers
1000 HP Mechanical Trailer Drilling Rig for Sale
1000HP land Rig For Sale
1000HP Drilling Rig for Sale - Mechanical Trailer
Drilling Land Rig for Sale - 1000 HP
1000 HP Land Drilling Rig For Sale
Used 1000hp Mechanical Trailer for Sale in USA
1000hp Land Rig Builders
----------------------------------------------------------------------------------------------------

Mechanical Trailer Package - 1000HP

ID 676

Deck Cargo & Ballast Tank Barge - New - for Sale

Worldoils Marketplace

Worldrigs ID: WR1992

Deck Cargo & Ballast Tank Barge for Sale
New Barge for Sale

Description :

Type : Deck Cargo & Ballast Tank Barge
Dimensions : Loa : 54,86m / B:18,29m / D:2,86m
Class : ABS A1 Deck Cargo Barge & Ballast Tank Barge
Build : New built
Deck : Cargo Deadweight : Approx. 2175 tonnes Deck load : 15 ton / m2 Deck Plate : 16mm

Location : S.E.Asia

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) -
Deck Cargo & Ballast Tank Barge for Sale in S.E.Asia
54.86m Length Deck Cargo & Ballast Tank Barge
New Deck Cargo & Ballast Tank Barge for Sale
ABS A1 Deck Cargo Barge & Ballast Tank Barge
---------------------------------------------------------------------------------------------------------

Deck Cargo & Ballast Tank Barge - New - for Sale

ID 1992

Worldoils Marketplace

Worldrigs ID: WR2896

New Electric - 1500hp - Rig for Sale
Electric Drilling Rig for Sale

Description :

Technical Description
A.1 Crown Block - Qty : 1 set
- Model: TC350
- Static hook load capacity: 3500KN
- Six (6) cluster sheaves and one (1) fastline sheave.
- Each sheaves grooved for 35mm (1-3/8") wire line.
- Confirming to API Spec.8C 5th Edition and API Spec 4F latest Edition; PSL1; SSL: E2 U2
- Dia. of main and fast line sheaves: 1524mm
• Crown saving Bumper blocks,secured cable and secondary retention by heavy wire mesh.
• Crown block have proper platform with proper railing & toe board.

A.2 Mast - Qty : 1 set
- Model : JJ350/45.5-K
- Wireline - raising type
- Effective height: 45.5m;
- Max. Static hook load: 3500KN;
- Height of monkey board: 24.5m,25.5m,26.5m;

- Monkey board to support 185 stands of 5" DP, 6 stands of 6-1/2", 5 stands of 8-1/4" DC and

2 Stands of 10" DC. (Racking capacity).

- Confirming to API Spec.4F Latest Edition; PSL1; SSL: E2/U2; API monogrammed.
- Mast allowed wind capacity :
• Operational wind (The wind below which unrestricted drilling operations may be continued) :
16.5m/s(32knots)
• Unexpected wind(No hook load, full of setsback) : Min.30.7m/s (60knots)
• Expected wind(No hook load, no setsback load ) : Min.38.6m/s (75knots)
• Erection wind : 16.5m/s (32knots)

A.3 Substructure - Qty : 1 set
- Model: DZ350/9-S
- Slingshot-raising type
- Rotary beam load : 3500kN;
- Setback rated capacity : 1800kN;
- Drill floor height : 9m;
- Rig floor area : 13.73m×11.15m
- Clear height(rotary beam to ground) : 7.6m;
- Two(2) sets tong tail line anchor
- Confirming to API Spec.4F latest Edition; PSL1; SSL: E2/U2.

Price & terms : Please enquire using the email form below

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
-----------------------------------------------------------------------------
Search words (for official use only) :
New Electric - 1500hp - Rig for Sale
1500HP Electric Drilling Rig - For Sale
Electric Drilling Rig for Sale
New Electric Land Drilling Rig for Sale
Land Drilling Rig for Sale
1500hp Drilling Rig for Sale
------------------------------------------------------------------------------

New Electric Land Drilling Rig for Sale

ID 2896

Worldoils Marketplace

Worldrigs ID: WR1437

Schramm T685DHH Drill Rig for Sale
1986 Built Schramm T685DHH Drilling Rig

Model : T685DHH Drill Rig
Manufacturer : Schramm
Condition : Used
Year : 1986

Description :

1986 Schramm T685DHH Drill Rig
Cummins KT19C diesel deck engine - rated 550 HP
Rebuilt GHH 850 cfm / 350 psi air compressor
Operator Cab
Hydraulic Table Wrench
12,000 Winch
24" Table Opening
Side Drill Rod Rack
Helpers Platform
70,000 lbs Pullback
12 GPM CAT Water Pump
Oil Pump
Mounted on a 1986 GMC truck (Tri-Axle)
Detroit 671T diesel engine - rated 300 HP
13 Speed Transmission (estimated 40,000 miles)

Location : Africa

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

--------------------------------------------------------------------------------------------------------------------
Search words(for official use only) -
Schramm T685DHH Drill Rig for Sale
1986 Built Schramm T685DHH Drilling Rig
Schramm T685DHH Drilling Rig for Sale in USA
Used Schramm T685DHH Drilling Rig for Sale
Drilling Rig 1986 Built- For Sale
---------------------------------------------------------------------------------------------------------------------

Schramm T685DHH Drill Rig for Sale

ID 1437

Featured equipments for sale

Worldoils Marketplace

Worldrigs ID: WR3004

Mudmats for Rent
MudMats for Use Offshore and Onshore for Rent

Description :

MudMat is a heavy-duty polyurethane (PU) Subsea
Protection & Support Mat developed for use offshore and
onshore.
The mat can be utilised as subsea support, landing and
positioning device or as seabed, pipeline and cable
protection. Design is based on offshore experience and
the requirement for a multi- purpose flexible mat.
Certified lifting slings have been integrated in the
MudMat® during fabrication resulting in the production of
a mat that is robust and easy to handle. MudMat® is
available in several standard sizes and weights. The
MudMat® is bundled for easy storage and transport.
MudMat® Reinforced has been developed for special
purposes and is equipped with moulded-in steel
reinforcement which ensures increased stiffness, weight
and robustness. It will also provide increased stability of
the product during subsea operations.

MudMat® has an expected life time of minimum 20 years

Type	Dimension(mm)	Mass in air/seawater(Kg)		Bundle size
Type	Dimension(mm)	MudMat®Standard	MudMat®Reinforced	LxWxH(cm)
MudMat®30	6000x5000x30	674/94	730/149	614x60x40
MudMat®18	3600x5000x30	410/57	445/91	367x60x40
MudMat®9	3600x2600x30	220/31	238/49	367x60x20
MudMat®4	2400x1600x30	91/13	99/20	243x30x15

Mudmats for Rent

ID 3004

Worldoils Marketplace

6 Pax Exploration Submersible for Sale

ID 2221

Worldoils Marketplace

Cummins KTA50G3 Industrial Gensets for Sale

ID 522

Worldoils Marketplace

Worldrigs ID: WR2164

105.72M Submersible Barge for sale
2011 Built Unused Submersible Barge for sale
13,800 DWT Submersible Barge - for Sale

Specifications
Length : 105.72m
Width : 40.0m
Depth: 3.5m
DWT : 13,800tons
Lightship : 3800ton
Depth achieved ; 22m
Year Built: 2011
Class: BV

Price & terms : Please enquire using the email form below

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
-----------------------------------------------------------------------
Search words (for official use only) :
105.72M Submersible Barge for sale
Unused Submersible Barge - 2011 Built for sale
13,800 DWT Submersible Barge - for Sale
2011 Built Unused Submersible Barge for sale
Unused Submersible Barge for sale
105.72 Submersible Barge - For Sale
----------------------------------------------------------------------

105.72M Unused Submersible Barge for sale

ID 2164

Worldoils Marketplace

Worldrigs ID: WR1364

NGL Fracking Storage Tank for Sale
Used Beaird NGL Storage Tank for Sale
1963 Built - 30,000 Gallon NGL Tank for Sale

Description
Quantity : 1
Manufacturer : Beaird
Year : 1963
Dimensions : 109" OD x 67' OAL
Pressure : 250 psi
Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

--------------------------------------------------------------------------------------------------------------------------
Search words(for official use only) :
NGL Fracking Storage Tank for Sale
1963 Built NGL Tanks for Sale
Used Beaird NGL Storage Tank for Sale
30,000 Gallon Capacity NGL Fracking Storage Tank for Sale
Beaird NGL Tank for Sale - 1963 Built
Used 30,000 Gallon NGL Storage Tank for Sale
---------------------------------------------------------------------------------------------------------------------------

NGL Fracking Storage Tank for Sale

ID 1364

Hybrid Solar + Wind + Genset Containers for sale

Worldoils Marketplace

Mobile Solar + Wind + Genset Container for Sale

ID 1075

2017 Manufactured Generator set - For Sale

Worldoils Marketplace

Worldrigs ID: WR2908

Generators for Sale
CAT3512B Generator set - For Sale

Description :

Technical Parameter
Model : 60Hz
Output Power : 995KW
Maximum Speed : 1200 rpm
Manufacturer : CAT
Quantity : 19 sets
Manufacturing Date : 2017

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
---------------------------------------------------------------------------
Search words (for official use only) :
2017 Manufactured Generator set - For Sale
1200 rpm Generators for Sale
CAT3512B Generator set - 2017 Manufactured
CAT3512B Generator set for Sale
60Hz Generators for Sale
-----------------------------------------------------------------------------

CAT3512B Generator set - For Sale

ID 2908

Worldoils Marketplace

Worldrigs ID: WR735

Oil Barge for Sale
3277dwt Oil Barge for Sale
Newbuilding Oil Barge for Sale

Description :
This double hull and double bottom oil barge is designed for
carrying base oil and finished oil, which flashpoint is below 60°C.

Particulars :
Length overall : 230 ft (70.104 m)
Length bp : 67.30 m
Breadth moulded : 60 ft (18.290 m)
Depth moulded : 18 ft (5.490 m)

Draft moulded : 3.63 m
Gross tonnage : 1834 t
Net tonnage : 807 t
Lightship weight : 970.19 mt

Displacement : 4247.55 mt at summer draft
Tank capacity : +/- 3277.50 mt
Hull material : steel

Tank age :
Cargo tank : +/- 3750 cub.mt
Fuel oil : +/- 8 cub.mt
Dirty oil tank : +/- 16 cub.mt
Fresh water : +/- 21 cub.mt
Sewage : +/- 16 cub.mt

Machinery, equipment & piping :
Cargo fuel pump :
2 x 2GC/BL350 Q=350 cub.mt/hr, P=0.8 mpa, 1500 rpm

Diesel engine :
2 x for starting cargo fuel pump, 6135 AZcaf, w=190 kW/220hp, n=1500 rpm

Reduction gear box : 2 x 135 r = 1:1
Generator : 2 x 24 kW daewoo, 415v / 50 hz / 3ph
General pump : 1 x 22 cub.mt/hr x 26 m/h

Fire pump : 1 x 22 cub.mt/hr x 26 m/h
Oily dirty water seperator : 0.5 cub.mt/hr
Hall's anchour : 1 x 900kg, wire cable Ø 28 x 200m

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------
Search words (for official use only) :
Oil Barge for Sale
Double Hull Barge for Sale - Length 230ft
New 230FT Barge For Sale in Asia
Newbuilding Oil Barge For Sale - 3277DWT
3277 dwt New Oil Barge for Sale in China
18ft depth new barge for Sale
----------------------------------------------------------------------------------------------------

Oil Barge -3277dwt Newbuilding - for Sale

ID 735

Worldoils Marketplace

Worldrigs ID: WR2010

Floating Crane for Sale
1967 Built Floating Crane

Description :

Type : Floating Crane
Dimensions : Loa : 46,86m / B:20m / D:3,28m
Class : GL
Build : 1967 built
Accom/Pax : 11 persons
Speed : 6 m/h
Capacities : Fuel:152m3 water:152m3
Location : North Europe

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) -
Floating Crane - 1967 Built - For Sale
11 persons Accommodation Floating Crane
Floating Crane in Europe
1967 Built - Floating Crane - for Sale
---------------------------------------------------------------------------------------------------------

Floating Crane for Sale

ID 2010

Worldoils Marketplace

Worldrigs ID: WR2193

Skidding Jacks and Control Panel for Sale
New Aanestad Hydraulic Jack for Sale

Description :

Aanestad Hydraulic Jack Capacity: 250 Tons
on the Piston Rod Side.
Stroke: 900mm.
Skidding Beam Dimensions: 700mm(w) c 60mm Upperand 75mm Lower Flange.
Skidding Beam Slots: 152x51mm (610mm and 255mm between slots).
Hydraulic Jacks are supplied with Grippers.

Specifics
Make : Aanestad
Model No : 5980
Quantity 1

Measurements
YOM : 2011
Weight : 11.2T
Condition : New and Unused
Documents : Y

Location : UK

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
-----------------------------------------------------------------------------------------------------------
Search words (for official use only) -
New Aanestad Hydraulic Jack for Sale
Skidding Jacks and Control Panel for Sale
2011 Built Skidding Jacks and Control Panel
Aanestad Hydraulic Jack for Sale in UK
-------------------------------------------------------------------------------------------------------

Skidding Jacks and Control Panel for Sale

ID 2193

Worldoils Marketplace

Worldrigs ID: WR2646

New Hose Float - For Sale
Offshore Hose Float for Sale

Description :

Hose & Cable Floats are primarily meant for the Single Point Mooring.
Mining and Cable Floatation applications. The floats have open roundes
edges to provide flexibility of movement to the hoses/cables to adjust
to currents and wind. Rubber pads are provided for tight fitment.
Floats are PU filled as a standard.

Application :

Single Point mooring
Floating Pipes for gold and other mines
Floating cable offshore

Small area marking

Pipe Size	ID	OD	Length	Approx Byoyancy(kgs)	Approx Floats/100m at SG2.4at 50%solids
Upto110mm	110	300	600	21	23
130mm	130	300	600	20	33

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

------------------------------------------------------------------------------
Search words (for official use only) :
Hose Float -110mm for Sale
600 length Hose Float for Sale
PU filled Float for Sale
130mm Hose Float for Sale
Dredging Hose Float for Sale
-------------------------------------------------------------------------------

Hose Float - For Sale

ID 2646

Worldoils Marketplace

Worldrigs ID: WR1788

Single Screw Vessel for Sale
20m Single Screw Tugboat

Description :

Type : Single Screw
Dimensions : 20 m x 5 m x 3.20 m
Build : 1985 Turkey, 1995 Rebuilt
Accom / Pax : 6
Machinery : 1 x 3508 Cat 805 Hp / 1300 Rpm
Speed : 11 knots

Capacities :
Liquid Waste Tank : 500 Lt
Water Tank : 17000 Lt
Fuel Tank : 32000 Lt

Location : Turkey
Others : FIFI Equipments

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------------------------
Search words (for official use only) -
Single Screw Tugboat Vessel for Sale
1995 Rebuilt Single Screw Vessel
6 Passenger Accommodation Single Screw Vessel
Single Screw Tug boat for Sale in Turkey
20m Tugboat for Sale in Turkey
-----------------------------------------------------------------

Single Screw Tug Boat for Sale

ID 1788

Drilling Rig - Failing 1500 Holemaster - For Sale

Worldoils Marketplace

Failing 1500 Holemaster Drilling Rig - For Sale

ID 1393

Ingersoll-Rand T4W Drilling Rig for Sale

Worldoils Marketplace

Worldrigs ID: WR1132

Ingersoll-Rand T4W Drilling Rig for Sale
Used Ingersoll-Rand Drilling Rig for Sale

Model : T4W Drill Rig
Manufacturer : Ingersoll-Rand
Year : 1987
Condition : Used

Description :

1987 Ingersoll-Rand T4W Drill Rig
740' ft of used Drill Pipe (25' x 4-1/2") & used Hammer & Tooling included
Detroit 12V71 Diesel Deck Engine
IR 900 cfm / 300 psi Air Compressor
7 & 4 Rod Carousels
Mounted on CCC (Crane Carrier Company) Truck
CAT 3208 Diesel Engine

Location : USA

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

------------------------------------------------------------------------------------------------------------------
Search words(for official use only) :
Ingersoll-Rand T4W Used Drilling Rig for Sale
1987 Built Ingersoll-Rand T4W Drilling Rig for Sale
Drilling Rig - Ingersoll-Rand T4W for Sale
Ingersoll-Rand T4W Drilling Rig for Sale in USA
Ingersoll-Rand Drilling Rig 1987 Built for Sale in USA
Ingersoll-Rand T4W Land Drilling Rig for Sale
-------------------------------------------------------------------------------------------------------------------

Ingersoll-Rand T4W Drilling Rig for Sale

ID 1132

Worldoils Marketplace

Worldrigs ID: WR1792

ASD Tug for Sale
2001 Built Tug for Sale

Description :

Type : ASD
Dimensions : Loa : 29.9m / B: 9.8m / Draft: 3.8m
Class : LRS
Build : 2001
Accom / Pax : 10 berths
Machinery : 2 x 1663 kW Deutz SBV 8M628 @ 1000rpm, total 4460bhp
Speed : 12 knots

Capacities :
Bollard Pull: 52t
Fuel oil : 175.0 m3
Freshwater : 24.5 m3
Dispersant : 5.0 m3
Foam : 5.0 m3

Location : S.East Asia
Others : FIFI Pump : 1 x Nijhuis HG1-250500, 1400m3/hr @ 14 bar c/w water curtain

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------
Search words (for official use only) -
ASD Tug Boat for Sale
Tug for Sale in Southeast Asia
2001 Built ASD Tug
10 Berth Accommodation ASD Tug
ASD Tug - 2001 Built
---------------------------------------------------------------------

ASD Tugboat for Sale

ID 1792

Worldoils Marketplace

Worldrigs ID: WR681

Subsea Manifold System For Sale
Subsea Oilfield Equipment for Sale
Subsea Kit For Sale

History :
This field was put onstream in 1994 and ceased production in 1999.
Located 21km from Frigg Complex. The field was de-commissioned
in 1999 and the 3 wells plugged and abandoned.

The 10,000psi wellhead was not ”On the Shelf” and specialised
development was required.

Design Parameters :

Based on 670 bars and 125 deg C with flowrates at 2.3MSM3/d. Compliance
based on Norwegian statutary authorities NPD etc meeting with the most
stringent requirements in the world. Water depth 120 metre. 3 off
production subsea wells tie back to TCP2 platform

Status :
Currently stored in Tananger Norway. Has been maintained
throughout delivery installation and return onshore.

Major Components :
Manifold System
• Manifold Cap – 13 5/8” – 10 M – Hydraulic high pressure (10.000 psi) cap,
to seal 8-1/4” nominal 13   5/8” – 10 M hub with metal to metal seal. Hub to
top for connection to running tool, with hydraulic  couplers.

• Subsea Pig Launcher Connector – For connection of pig launcher to manifold,
13 5/8” – 5M connector, with tapered bore.

• 13 5/8” – 10M Full Bore Manifold Hub Assembly – 13 5/8” – 10M hub for manifold
interfaces with 13    5/8” – 10M connectors with 13 5/8” – 10M flanged bottoms.

• Loose valves – 2 1/16” and 4 1/16” – 10M manual ROV operated gate valves.

• The Base Connector 13 5/8” – 10M Connector with 8 ¼” through bore.

Wellhead System :
• 18 ¾” Wellhead Assembly – 15 M SB system wellhead housing with 20”
casing extension, inlays in seal areas.

• 30” Suspension Joint – Suspension Joint for interface with retrievable
IDGB/ PGB and support wellhead.

• 13 3/8” Casing Hanger – With buttress – thread, inlay on packoff seal area.

• 10 ¾” Casing Hanger – With new VAM thread, inlay on packoff seal area.

• Packoff seal assembly – Locks and seals casing hanger to wellhead housing,
with aluminium bronze seal element.

• Drilling Guide Base – Retrievable guide base with removable 10 ft posts,
Vetco post tops.

• Dummy Wellhead |- 18 ¾” wellhead outer profile, with simulated 10 ¾” inner profile,
supported in a 30” housing on a base plate.

• Temporary Wellhead Protective Structure – Lands and supported on 30” housing.
Internally acts as corrosion cap for welhead and housing, externally provides
protection against impact damage and over-trawlability.

Tubing Hanger System :
• Tubing hanger – 4” x 2” – 11M tubing hanger, with 5” pup joint, 4 SCSSV penetrations
and one seal  test port with check valves, metal to metal sealing with inlayed seal areas.
• Tubing Hanger Running Tool and BOP/ Orientation Adaptor – 4” x 2” – 10M running tool
for SB  system tubing hanger running and setting.
• Tubing Hanger Emergency Recovery Tool – Mechanical tool run inside the drilling riser
on drill pipe.   Will land and lock inside tubing hanger allowing recovery.
• Tubing Hanger Orientation/ Elevation Check Tool – Tool which can be run inside the
drilling riser to check the orientation and elevation of the tubing hanger in relation to the
orientation pin. Utilises lead impression blocks.
• Tubing Hanger Washout Tool – Tool which is run on drill piupe with four arm guide wire
frame, to washout tubing hanger seal pockets after removal of BOP prior to installation
of Xmas tree.

Xmas Tree System :
• Production Guide Base – Similiar to/ connected Drilling Guide Base with flowline and
service line hubs mounted to provide connection flexibility to the Xmas tree. Interfaces with
30” housing and flowline/ service line flexibles.

• Xmas Tree – 4” x 2” – 10M valve block, with integral actuated and manual 10M valves.
18 ¾” tree connector with flowline and service line connector, 13 5/8” – 10M hub mandrel
top, tree protection frame.

• Xmas Tree cap Assembly – 13 5/8” – 10M hydraulic tree cap for 4” x 2” bores.

• Xmas Tree Test Stand – Fabricated base with short dummy PGB posts and mating test
hubs for 18 ¾” connector and flowline and service line connectors.

• Xmas Tree Maintenance Stand – Independant extension feet which can be mounted over
dummy PGB posts, or used individually to raise the height of the tree and support its weight.

• Universal Shipping Skid – Fabricated base to which either test stand sticks, or individual
equipment frames can be mounted and restrained for shipping.

Workover System
• Lower Riser Package – 4” x 2” – 10M Valve block with 4” and 2” isolation valves and coiled
tube cutting BOP ram. 13 5/8” – 10M connector bottoms with 13 5/8” hub mandrel top. High
angle release.

• Emergency Disconnect Package – 13 5/8” – 10M connector with riser weak link and stress
joint connector. Incorporating wireline plug profiles.

• Riser System – Consisting of 5” x 2 ½” – 10M riser, stress joint, standard joint, pup joints,
tension joint and landing joint. Upper and lower riser adaptors.

• Surface Tree – 5” x 2 9/16” – 10M surface tree block with 4” and 2” actuated wing valves,
supported in tensin frame, with tree cap, suitable for wireline BOP.

EAST-FRIGG

History :
The field was put onstream in 1988 in a water depth of 100 metre. In 1997 the field was
shutdown and in 1999 the production wells were decommissioned, plugged and
abandoned. The field was located 18km from the Frigg complex.

A technological pioneer project developed for diverless installation and operation. The
first subsea field on the Norwegian shelf with remote controlled wells in several clusters.
The East-Frigg development was based on modular principles as the first of its kind.

Design Parameters :
EF installations were designed for a minimum flow-rate of 1.25MSM3/d and a maximum
flow-rate of 6.5MSM3/d. The maximum working pressure rating was 345bar. Bottom hole
flowing temperature approx 62 deg C, Wellhead hole flowing temperature approx 35-40
deg C, Wellhead static temperature 4-6 deg C. Design was based on 5 subsea production
wells located over 2 production templates PSA & PSB. For reduncy reasons and to
minimize intervention it was decided at this time to include 2 off Xmas trees in series
for each well. 1 off Vetco and 1 off ”Well Jumper Module tree Cameron.

There were 3 wells on PSA and 2 wells on PSB , the two production stations produced to a
central manifold station (CMS) located halfway between the 2 production stations which
were approx 3km from each other. Production flowed via the CMS to Frigg where it was
metered and treated.

Status :
Currently stored in Tananger Norway. Has been maintained throughout delivery installation
and return onshore.

Major assemblies comprises :
5 off Vetco Xmas tree and tree cap assemblies, each gas production tree comprising 18 ¾”
SG-5 wellhead connector, integral with 5” x 2” , 5,000psi working pressure valve block, with
fail safe closed valves, equipped with visual position indicators and overrides. Manifold spool
flanged to block, production spool, Xmas tree guide frame, control system components and piping.
Complete tubing hanger system including hydraulic running tools, adaptors, VAM-Hydril x over
riser couplings, emergency recovery tools, orientation/ inspection tools. Control systems for THRT.
Intervention amd maintenance systems incl; flowhead, 5,000 riser system, EDP/ LRP, hydraulic
control system, adaptors, test stumps, remote killing equipment, guide bases, hubs, sealing
caps, dummy Xmas tree etc

6 off Kongsberg/ Cameron WJM (Xmas trees)
Xmas trees made of forged steel block of low alloy steel, all sealing areas are inconel inlaid
(ring grooves, seal sub pockets, valve seat pockets)

Module M35 Description :
The module was delivered, installed and commenced production in 1993. Design life was
30 years. Production ceased as with Lille-Frigg in 1999. The purpose of the module was to
faciltate handling of process for both Lille-Frigg and the Oil producing satellite platform Frøy.
(Note Frøy platform has been returned onshore and been disposed of)
Dimensions of the module are 40.5m length x 24m width x 24.8m height. Weight for single lift
is 3216 ton. The module is located on the TCP2 platform located within Frigg process handling
complex.

The module is equipped with a pedestal crane with working radius at 36 tons between 9-30
metres and 12 tons with maximum radius of 60 metres. This crane carried out material handling
for all of the TCP2 platform, which meant that TOTAL could at the time dispose of the rest of the
smaller cranes which were out of date.

The module is in pristine condition ”As New” with all systems and equipment under full
preservation. and maintenance.

The module contains systems and equipment for treatment of oil & gas comprising the following
main functions;
Gas System
Oil System
DEG recovery
Fuel Gas Compression
Water Injection System
Electrochlorination System
Fine Filter System
Dearation System
Water Injection Pumps
Fiscal Metering Systems
Produced Water System
Heating Medium System
Chemical Injection System
Electrical and Control Systems
Firewater and Deluge systems
Fire & Gas monitoring and protection.
Lighting, normal and emergency.

Also included in the module are, intrument control room, low voltage rooms, high voltage room, drains,
stairs, platforms, escapes routes, vent/ flare systems, piping to ANSI standards manifolds and
distribution. All cabling routes etc are intact.

Module M52 description :
The module which is located on the support frame of TCP2 contains equipment for treatment of
condensate and gas and comrises the following main functions;
Pig traps
Condensate heaters
Separators
Pumps
Gas metering
Gas Lift compressor
Module dimensions; 31.3m long x 11.3m width x 8.2m height. Weight 573 ton.
The module has a design life of 30 years with a start of production 1993 ceased production 1999.

Module (pancake) P48 description :
The module which is located inside the support frame of the TCP2 contains equipment for stabilisation
of condensate and oil & gas comprising the following main functions;
Separator
DEG and condensate pumps
Condensate metering
Fuel gas compressor
Module dimensions; 16.2m long x 12.2m width x 5.2m height
The module has a design life of 30 years with a start of production 1993 ceased production 1999.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

--------------------------------------------------------------------------------
Search words :
Subsea Manifold System For Sale
Subsea Equipment For Sale
Subsea Wellhead System for sale
Subsea Xmas Tree System For sale
Complete Subsea Kit For Sale
Subsea Kit For Sale
Subsea Field for Sale
Subsea Oilfield Equipment for Sale
----------------------------------------------------------------------------------

Subsea Manifold System For Sale

ID 681

Worldoils Marketplace

Worldrigs ID: WR1318

LPG Storage Tank for Sale
Used 30,000 Gallon Trinity LPG Tank for Sale
LPG Storage Tank - 1997 Built for Sale

Description
Quantity : 1
Manufacturer : Trinity
Year : 1997
Dimensions : 132" OD x 47' OAL
Pressure : 250 psi
Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

------------------------------------------------------------------------------------------------------------
Search words(for official use only) :
LPG Storage Tank for Sale
Used 30,000 Gallon Trinity LPG Storage Tank for Sale
1997 Built LPG Tank for Sale
30,000 Gallon Capacity LPG Tank for Sale
LPG Storage Tank for Sale - 1997 Built
Used Trinity LPG Tank for Sale
------------------------------------------------------------------------------------------------------------

LPG Storage Tank - 30,000 Gallon 1997 built - for Sale

ID 1318

Gardner Denver 1500 Drilling Rig for Sale

Worldoils Marketplace

Gardner Denver 1500 Drilling Rig - For Sale

ID 2813

Bulk Carriers for sale

ID 621

Drilling Rig - Davey Rouselle M8A - For Sale

Worldoils Marketplace

Davey Rouselle M8A Drilling Rig for Sale

ID 2817

Worldoils Marketplace

Used SWATH Crewboats - For Sale

ID 2832

Worldoils Marketplace

Gottwald HMK 280E Mobile Harbour Crane for sale

ID 2199

Panama Chocks for Deck mounting for Rent

Worldoils Marketplace

Worldrigs ID: WR2968

Chocks for Deck mounting According to DIN 81915 for Rent

Chocks for Deck mounting for Rent

Description :

Type	Rope Diam.	Wire working load	Wire breaking load	Weight
C2	-16 mm	20kN	150kN	29kg
C3	-20 mm	30kN	220 kN	48kg
C5	-24 mm	50kN	350kN	85kg
C8	-32 mm	80kN	500kN	136kg
C12	-40 mm	120kN	800kN	211kg
C20	-48 mm	200kN	1150kN	325kg
C32	-48 mm	320kN	1750kN	840kg

Type	E	B1	D	H1	L1	L2	R1	R2	S1	S2	W1	W2
C2	158	315		200	360		100	57.5	12	6	160	115
C3	195	390		250	450		125	70	14	7	200	140
C5	240	480		300	550		150	90	16	8	250	180
C8	293	585		360	680		180	112	18	9	320	225
C12	355	710		440	840		220	135	20	10	400	270
C20	420	840		520	1020		260	160	22	11	500	320
C32	550	1100		700	1300		350	200	35	20	600	400

Chocks for Deck mounting - For Rent

ID 2968

Diving Support Vessel - 1985 Built for sale

Worldoils Marketplace

Worldrigs ID: WR1876

Utility Vessel for Sale
Diving Support Vessel - 1985 Built for sale

Description :

Type : Diving Support/ Utility Vessel
Dimensions : 45.7m x 10m x 2.4m
Class : IRS
Build : 1985
Accom / Pax : 28 person
Machinery : 2 x 1225 bhp, MAN 9 L 20 / 27, 4 stroke Diesel
Speed : At 100% MCR : 12 knots At 85% MCR : 10 knots Cruising speed : 08 knots
Deck :
Clear Deck space : 160 Sq Mtrs (Approx) Deck strength : Uniform – 5.0 T / Sq M
Crane : Hydraulic Telescopic Pedestal Crane SWL 10 T @ 22 Ft. Boom
Length-9.5 to 16.5 M Aft Winch : 2 x 10 T, Hydraulic Towing Winch

Capacities :
Fuel Oil : 136.43 M3 Fresh Water : 177 MT ( 70 T + 107 T in Ballast Tanks)
Deck Cargo : 46.80 Tons

Location : South East Asia

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------------------------
Search words (for official use only) -
1985 Built Utility Vessel for Sale
28 person Accomodation Offshore Utility Vessel
Utility Vessel - 45.7m for Sale
45.7m Diving Support Vessel for Sale
Diving Support Utility Vessel for Sale in Asia
-------------------------------------------------------------------------------------------------------

Diving Support/ Utility Vessel - 1985 Built for Sale

ID 1876

Research Vessel for sale

ID 2601

Worldoils Marketplace

Worldrigs ID: WR2849

272FT Offshore Supply Vessel for Sale
1998 Built OSV for Sale
2007 Modified Offshore Supply Vessel - For Sale

Description :

Offshore Supply Vessel for Sale

ID 2849

Worldoils Marketplace

Worldrigs ID: WR1790

ASD Tug for Sale
2013 Built Tugboat for Sale

Description :

Type : ASD Tug
Dimensions : 32m x 11.6m x 5.81m
Class : LR +100 A1, TUG, +LMC, Fire Fighting 1
Build : 2013
Accom / Pax : 10 crew
Machinery : 2 X 2682bhp@1600RPM (CAT3516B)// tt:5364bhp
Speed : 12 knots

Deck :
Fwd Towing Winch/ : brake rating 150t
Aft Winch : 150T Bh
Towing Hook : 70t SWL (Plimsoll)
Deck Crane : Palfinger PK6500M

Capacities :
Fuel Oil : 205 m3
Potable Water : 37 m3
Ballast Water : 120 m3

Location : Far East

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) -
ASD Tug Boat for Sale
2013 Built Tugboat for Sale
10 Passenger Tugboat for Sale
ASD Tug - 2013 Built for Sale
---------------------------------------------------------------------------------------------------------

ASD Tug Boat for Sale

ID 1790

Worldoils Marketplace

Worldrigs ID: WR1764

Crew Boat for Sale
2002 Built Crew Boat in Middle East

Description :

Type : Crew Boat
Dimensions : L: 49 / B: 9 / D: 3m
Class : ABS
Build : 2002
Accom / Pax : 80 Seats
Machinery : 6750 BHP
Speed : 26 Knots
Deck : 228 m2 Deck Space

Location : Med Area

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

------------------------------------------------------------------------------------------------
Search words (for official use only) :
Crew Boat for Sale
2002 Built Crew Boat
Crew Boat - 49m for Sale
Crew Vessel for Sale in Middle East
Crew Vessel 2002 Built for Sale
------------------------------------------------------------------------------------------------

Crew Boat - 49m - for Sale

ID 1764

Accommodation Barge with 1600Ton Crane for Sale - Newbuilding

Worldoils Marketplace

Worldrigs ID: WR493

Crane Barge with Accommodation for Sale
Accommodation Barge for sale
1600Ton Crane Barge with 300 men Accommodation for Sale
300 Pax Accommodation Barge for sale with 1600Ton crane
Accommodation Crane Barge for Sale

Principal Dimensions
Length overall 120.00 m
Beam moulded 36.00 m
Depth moulded 9.60 m
Operation draft 6.00 m
Scantling draft 6.50 m

Complement
8 x 1 - man cabins 8 men
18 x 2 - man cabins 36 men
64 x 4 - man cabins 256 men
Total 300 men

Tankage
SWB - approx 17077 m3
Fresh water tank (potable) –approx 1568 m3
Fuel oil tank - approx 2022 m3
Dirty oil tank (approx.) 34 m3
Overflow tank (approx.) 17 m3
Sludge tank (approx.) 17 m3
Bilge tank (approx.) 34 m3
Grey water tank (approx.) 252 m3
Lube oil tank(approx.) 10 m3

Main deck strength 20 tonnes/m2

Machinery & Main Equipment
Generating set 8 x 1000KW each
Mooring System 10 x single drum winch

Deck Floating Crane (WISON make and install)
Lifting capacity : 1600tons
Rated over stern load : 1600t
Revolving load : 1200t out reach 32m
Auxiliary hook : 300t
Whip hook : 50t

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
------------------------------------------------------------------------------------------------
Search words(for official use only) -
Crane Barge with Accommodation for Sale
Accommodation Barge For Sale
1600Ton Crane Vessel for sale
1600Ton Crane Barge with Accommodation for Sale
Newbuilding Crane Barge for sale
300 Men Accommodation Barge for Sale
300 Persons Accommodation Barge for sale
Accommodation Barge with Crane for sale
Newbuilding Accommodation Vessel for sale
Crane Work Barge For Sale
----------------------------------------------------------------------------------------------

Crane Barge with Accommodation 1600Ton for Sale

ID 493

Worldoils Marketplace

Worldrigs ID: WR496

LCT for Sale
37M Landing Craft for sale
1985 built LCT for sale

Technical Specifications :

Craft Type :
Twin Screw Steel Ramp Powered Lighter (Landing Craft)
Plan approval for major structures was obtained from ABS
Not class-maintained.

Year Construction 1985
Length (LOA) : 36.70m
Breadth (Moulded) : 8.50m
Depth (Moulded) : 2.50m
Maximum Draft (up to Loadline mark) : 1,647m
Displacement : 334.60 tonnes
Maximum Deadweight : 148 tonnes

Propulsion Engine :
2 X M.A.N D2540 MLE
Watercooled with keel coolers
Direct injection with turbocharger
Power output : 320kW at 1800rpm

Rudder Propeller : 2 X Schottel Rudder Propeller SRP 152/151
Generator Engine :
2 X Deutz F6L912
Air-cooled direct injection
Power output : 57kW at 1800rpm

Alternator :
2 X AVK, DKBN 32/50-4TS
Rated capacity : 54KVA

Main Switchboard :
Manufacturer : LK-Nes (SEA) Pte Ltd
Type : Marine, multi-cubicle, front and back
Access, floor standing design
Class : ABS

Battery Charger :
E/R battery charger rating : 115V/24V, 40V
Wheelhouse battery charger rating : 115V/24V, 20A

Bilge and Ballast :
Pump : Desmi self-priming centrifugal pump
(Rated capacity : 20cbm /h at 30m head ; Identical pumps with interconnecting
piping such that any two can be used for servicing bilge, ballast or fire system)
Motor : Electrim SF 132S-4X (7.5hp, 404V, 3 phase, 60Hz, 1750rpm)

Fuel Oil Transfer :
Pump : Desmi self-priming centrifugal pump, S-70-50-275
(Rated capacity : 20cbm /h at 30m head
Motor : Electrim SF 132S-4X (7.5hp, 404V, 3 phase, 60Hz, 1750rpm)

Fresh Water :
Transfer Pump : Desmi self-priming centrifugal pump, S-70-50-275
(Rated capacity : 20 cbm /h at 30m head
Motor : Electrim SF 132S-4X (7.5hp, 404V, 3 phase, 60Hz, 1750rpm)

Domestic F.W. :
Pump : Sony CK series centrifugal pump
Motor : ASEA MT 80A19-2 (1hp, 440 V, 3 phase, 60Hz, 3480rpm)

Ramp Winch :
Winches : 2 X Electric Ramp Door Winch KERW-2010 (2-tonne capacity, 10m/min
winding speed, 14mm dia X 50m wire size)
Motor : Miyako Seisakusho MIC-B-132S (3.7kW, 440V, 3 phase 60Hz, 1150rpm)

Anchor Winch :
Winch : Electric Anchor Winch KEAW-2010 (2-tonne capactiy, 10m/mm
winding speed, 16mm dia x 190m wire size)
Motor : Miyako Seisakusho MIK-B-160M (7.5W, 440V, 3 phase 60Hz, 1150rpm)

Public Address System : Phonico P.A. System p-2700/4
Echo Sounder : NJA-550MII
Navigational Radar : Decca 270

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

------------------------------------------------------------------------------------------------
Search words(for official use only) -
LCT For Sale
37M Landing Craft for sale
Landing Craft For Sale
Used LCT For Sale
LCT Brokers
37M LCT for sale in Singapore, Malaysia, Indonesia
Landing Craft for sale in middle East, Dubai
1985 built LCT for sale
Old LCT For Sale - 1985 built
Used Landing Craft For Sale
LCT Sellers
--------------------------------------------------------------------------------------------------

Landing Craft 37M for sale

ID 496

318 pax accommodation work barge For Sale - 2010 Built

Worldoils Marketplace

Worldrigs ID: WR474

Accommodation Work Barge For Sale
95M Accommodation Work Barge For Sale
2010 built 318 pax Accomodation Work Barge

Year built : 2010
Class : Bureau Veritas

Dimensions :
Length overall : 95.00 meters
Breadth moulded : 22.00 meters
Depth at Freeboard DK : 7.80 meters
Draft designed : 4.20 meters

Tonnage :
GRT : 6974.00 metric tons
NRT : 2358.00 metric tons
Deadweight : 4624.81 metric tons

Machinery :
Main generator : 4 x 500kw, 3ph, 50hz
Emergency generator : 1 x 200kw, 3ph, 50hz
Power supply : 380v/220v
Fresh water maker ; 2 units Total : 100mt/day
Oily water separator :
1 x SKITS,
DEB 15ppm, 2.5 cu/hr
Sewarage treatment : 1 x Hamworthy ST15

Capacities :
Fuel oil : 565 mt
Fresh water : 1120 mt
Ballast water : 2500 mt
Dry provision stores : 4 nos.; Total : 250 sqm
Freezer : 2nos.; Total 94 sqm
Chillers : 2nos.; Total 80 sqm

Pump Capacity :
Fuel oil - 1 : 25 cbm/hr @ 50m head
Fuel oil - 2 : 50 cbm/hr @ 50m head
Fresh water : 50 cbm/hr @ 50m head
Ballast water : 125 cbm/hr

Fire Fighting & Life Saving Equipment :
Fixed ext. system : CO2 for machinery rooms
Sprinkler system :
Fixed automatic for entire accomodation, stores & workshop
Fire detection system : In all enclosed spaces
Fire pump : 2 x 125 cbm/hr @ 95m head
Foam monitor : 2 x 2200 l/m @ 7 bar
Foam tank : 2 x 400 litres
Portable fire ext. : 78 nos
Life raft : 38 x 25 person, SOLAS app. Life Jacket
Rescue boat :
2 x 16 person
Water jet propelled

Accommodation Facility :
Single/double berth cabin : 8/19 nos. w/T/B
Fourth berth cabin : 68 nos. w/T/B
Clinic :
1 x double berth w/T/B
on main deck w/attached
Paramedic room

Clinic office/lounge : on 1st deck
Meeting room : on 1st deck, 36 person seatings
Prayer room : on main deck

Deck Equipment :
Main crane : 1 Electro Hydraulic, TTS Marine Crane KL25t
Main hook :
45mt @ 20 meters outreach
25mt @ 40 meters outreach

Auxilliary crane : Hydraulic Telescopic 8t w/38 meters boom
Anchors : 8 x 7 mt Delta Flipper
Anchor wires : 8 x 1100m x 42mm
Mooring winch : 8 x single drum, 40t line pull, 100t brake holding from Nor Crane
Winch monitoring : w/ calibrated tension and line out sensors
CCTV : Cameras covering all winches
Capstan : 4 x 5.5 mt pull

Helideck :
Designed for Sikorsky S92 for helicopters w/ 'D' value up to 21 meters

Clear Deck Area :
Free deck area : 733 sqm
Deck strength : 10t/sqm

Communication & Navigation Equipment :
VHF (fixed) : 2 x ICOM
VHF (portable) : 3 nos.
Navtex/Printer : 1 x JMC
MF/HF trans receiver : 1 x SAILOR
Air Band VHF : 1 x ICOM
P.A. talkback system : 1 no.
Internal telephone :
PABX for all cabins and intercom as per SOLAS requirement

Satellite comm. : 1 x VSAT, SEATEL w/FFB back-up
Weather station : 1 R.M. Young
Gyro compass : 1 x Yokogawa, one repeater
GPS/Plotter : 1 x AQUA
Radar/ARPA : 1 x KODEN
AIS : 1 x TRON
EPIRB : 1 no.
SART : 2nos.

Total Accommodation : 318 person
Mess room : on tween deck, 132 person seatings
Recreation/TV room : Below tween deck, 82 person seatings
Gymnasium : Fully equipped
Game room : Table Tennis & Pool
Public phone : Enclosed phone booth w/ Satelliteconnection & pre-paid card facility

Entertainment Facility :
Satellite TV reception in all cabins with 4 internal channels
One theather hall w/projector and surround sound
One meeting/training hall w/50" TV and surround sound

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------------
Search words(for official use only) -
Accommodation Work Barge For Sale
95M Accommodation Work Barge in Nigeria, West Africa
Accommodation Work Barge in South America
Over 300 pax Accommodation Work barge For Sale
Accommodation Work Barge For sale - 318 persons
2010 built 318 pax Accommodation Work Barge
95M Accommodation Work Barge in Asia, Singapore, Malaysia
2010 built Accommodation Work Barge in Middle East
----------------------------------------------------------------------------------------------------------------

Accommodation Barge 95M for sale

ID 474

18,000 LPG Propane Tank - 1948 Built - for Sale

Worldoils Marketplace

1948 Built 18,000 LPG Propane Tank - For Sale

ID 2863

293 Men Pipelaying Diving Maintenance Accommodation Barge For Sale

Worldoils Marketplace

Worldrigs ID: WR483

Pipelaying barge For sale
292 Men Pipelaying Diving Maintenance Accommodation Barge
112M Pipelaying barge For sale
Pipelaying Accommodation Barge for Sale
2008 built Pipelaying barge For sale

Pipelay Capability for 200 mm – 1500 mm Pipe

Principal particulars
Class : ABS +A1 unrestricted service with MODU code attestation
Built : 2008
Gross Tonnage : 13,575 T
Nett Tonnage : 4,072
Dead Weight 10,233 T

Dimensions
Length overall : 111.63 m
Breadth moulded : 31.7 m
Depth : 9 m
Designed Draught : 4.8 m

Pipelaying facilities
Pipelay Equipment
Pipelay capability for 200 mm to 1500 mm
90 ton pipe lay tensioner capacity (30 m/min)
100 ton pipe lay abandonment / recovery winch
Automatic tensioner transfer system
Pipelay conveyor and transfer system rated to 32 ton

7 welding stations with semi-automatic welding system (STT & flux core)
1 NDT station
2 field joint stations
Dark Room
Stinger/Ramp
3 degree sloping production firing line
34 m outrigger stinger adaptable to different project requirements

Diving capability
In-built moon-pool (5.5 m x 5.5 m)
Support services for modular saturation diving spread
8 POINT MOORING SYSTEM
8 x single drum 90 ton mooring winches
c/w tensional sensor, wire length counter
8 fairleads, with 1500m of 52mm wire rope.
9 x 10 ton Delta Flipper anchors9 x Pennant Buoys

Helideck
Size : 22 x 22 m for Sikorsky S61

Safety systems
Mass Evacuation Slide and Raft System
Life rafts to 590 person capacity
600 life jackets/12 life rings
1 x fast rescue boat
Active high specification smoke and fire monitoring and extinguisher
system in all accommodation, engine, winch, paint and boiler rooms
Sprinkler system
Machinery guarding systems
Dedicated boat landing transfer points

Environmental
Sewage treatment system meeting MARPOL standards
Spill prevention systems

Other facilities
Hospital with 2 beads
Well equipped galley
Mess room with seating for 180 people
Large cinema, TV room for 110 people
Recreational Room for 60 people seating

Internet and email room
Well equipped gym
Laundry and large food storage facilities
5 Specialist Personnel Office rooms
2 Client office rooms
3 General office rooms
2 Control rooms with CCTV and metering

Navigation /Radio Control room with helicopter coms
Conference room for 25 people
Prayer room
Paramedic room
Change room with lockers and wash facilities
Work shop with Lathe, Drill press plus other tooling
2 water makers of 40 ton per day capacity

Machinery
Generators : 5 x Mitsubishi 1200 kva 60 cycle.
Emergency Generator : 1 x Diesel Caterpiller 500 kva 60 cycle.

Tank capacities
Fuel Oil : 2211 m3
Potable Water : 1926 m3
Grey Water 23 m3
Black Water 23 m3
Bilge 23 m3
Dirty Oil 27 m3
Cooling Water 750 m3

Pumps
Fire/General Service : 2 x 130 m 3 hr 80 m head
Fuel Oil : 2 x 20 m3 hr 30 m head
Ballast Water : 2 x 300 m3 hr 30 m head
Potable Water : 1 x 120 m3 hr 35 m head
Domestic F Water : 1 x 30 m3 hr 35 m head
Domestic S Water : 1 x 30 m3 hr 35 m head
Emergency Fire : 1 x 50 m3 55 m head

Deck area
Clear deck area over 2000 m2,
Deck Strength 12.5 t/m2 rating
Carriage Capacity over 11,000 tons
Provision on deck for suitable crawler crane

Accommodation
High Standard of Accommodation
Tank Top Cabins 30 x 2 = 60
Tween Deck Cabins 30 x 2 = 60
Deck 1 Cabins 24 x 2 = 48
Main Deck 1 x 2 = 2
Deck 2 Cabins 32 x 2 = 64
Deck 3 Cabins 28 x 2 = 56
Additional Deck 3 Cabins 2 x 1 = 2
Total Berths 292
Cabins with en-suites and fully air conditioned

Price & terms : Please enquire using the email form below

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------------------------------------------------------------------------------
Search words(for official use only) -
Pipelaying barge For sale
112M Pipelaying Barge For sale
Pipelaying Diving Maintenance Accommodation Vessel
292 Men Pipelaying Diving Maintenance Accommodation Barge For Sale
2008 built Pipelaying barge For sale
Pipelaying accommodation Barge for Sale
Diving Accommodation Vessel with Pipelaying
------------------------------------------------------------------------------------------------------------------------------------------

Pipelaying barge 112M For sale

ID 483

800 HP Mechanical Drilling Rig - Trailer Mounted - For Sale

Worldoils Marketplace

Worldrigs ID: WR2774

Wilson 42 - 110 Double Trailer Mounted Rig for Sale
800 HP Mechanical Drilling Rig - Trailer Mounted - For Sale

General Description :

Make : Wilson

Wilson 42 - 110 Double Trailer Mounted Rig - For Sale

ID 2774

Ingersoll-Rand TH75W Drill Rig - For Sale

Worldoils Marketplace

Worldrigs ID: WR783

Ingersoll-Rand TH75W Drill Rig - For Sale
Ingersoll-Rand Drilling Rig - 2000 Built for Sale

Model : TH75W Drill Rig
Manufacturer : Ingersoll-Rand
Year : 2000
Condition : Used

Description :

2000 Ingersoll-Rand TH75W Drill Rig
55,000 lbs of Pullback (70,000 # cylinder option)
Four Motor High Torque (8,000 Ft.-Lb. Torque) Tophead Drive
IR 1050 cfm / 350 psi Air Compressor (105 Original Hours on Compressor)
Hydraulically Driven 3"x4" centrifugal pump
Cummins QSK-19 Diesel Deck Engine - rated 600 HP
Mounted on a International 5000 Truck
Cummins N14 500 HP Engine
Fuller 8LL Transmission
20K Front Axle / 46K Rear Axles
7 Rod 4-1/2" X 20ft Drill Pipe Carousel
Deck Engine Diesel Fired Pro Heater
16,000 Lb. Main Winch with Swing and Telescoping Jib Boom - the winch is a Gearmatic that
has enough cable capacity to run a three part line (48,000 lbs.).
Newer deck engine installed recently- 2017
New sandline in 2017

360ft of 4 1/2", 2 7/8" thread, 20ft length pipe included

Ingersoll-Rand TH75W Drill Rig - For Sale

ID 783

Worldoils Marketplace

Worldrigs ID: WR2234

Crew Boat for Sale in Asia
2004 Built Crew Boat for Sale

Description :

Type : Crew Boat
Dimensions : L: 50 / B: 9 / 2m
Class : ABS
Build : 2004
Accom / Pax : 60 Pax
Machinery : 5400 BHP
Speed : 22 knots
Deck : 237 m2 Deck Space
Capacities :

Location : South East Asia

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

------------------------------------------------------------------------------------------------
Search words (for official use only) :
Crew Boat for Sale
2004 Built Crew Boat
Crew Boat - 50m for Sale
Crew Boat for Sale in Asia
60 Passenger Accomodation Crew Boat
Crew Vessel 2004 Built for Sale
------------------------------------------------------------------------------------------------

Crew Boat - 50m - for Sale

ID 2234

Worldoils Marketplace

Schramm T64HB Drilling Rig - For Sale

ID 1479

Land Drilling Rig for Hire

ID 572

Worldoils Marketplace

Worldrigs ID: WR865

Landing Craft 300Ton For sale
300 ton Landing Craft
1982 built Pax/Car Ferry for sale
250 Pax Landing Craft For Sale

Specifications

Built/Rebuilt : 1982
Dwt : 300
Dims : 50.0m x 10.0m x 1.8m draft
M/E : 2 x 600 (Total 1200 bhp)
Props : 2 x fixed
Pax cap. :250
Car cap. : 46

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
---------------------------------------------------------------------------------------------------------
Search words(for official use only) -
Landing Craft 300 Ton For Sale
300Ton Landing Craft For sale - Built and rebuilt in 1982
250 Pax Landing Craft For Sale
Landing Craft For sale in Europe
Car/Pax Landing Craft for Sale
Landing Craft For Sale - 300 Ton
-------------------------------------------------------------------------------------------------------