OIME 2000 Drilling Rig for Sale
2000 HP SCR Drill Rig for Sale
Drilling Rig with Newly built Components
Description
Drawworks
OIME 2000 HP drawworks, 42VC1200 high drum clutch and 38VC 1200 low
drum clutch, Driven by two (2) GE 752 type series wound DC traction motors
with 10 hp blowers. Complete with Wichita 336 water or glycol cooled
auxiliary brake.
Mast
DSI 150’ beam leg with 1,000,000 lb hook load capacity and mast assembly stand.
Crown Block - 1 x 60” fabricated steel fast line sheave and 6 x 60” working sheaves.
Sheaves grooved for 1-3/8” line. Geronimo line is 9/16” line 1.5 times derrick height in
length. Drill pipe capacity is 242 stands of 5” DP and 10 stands of 9” DC’s. One mast
assembly stand and two stands to elevate the blocks are included.
Deadline Anchor - 100,000 lb deadline anchor, Deadline is on off-driller’s side
Substructure
DSI 30' box-on-box with a casing capacity of 1,000,000 lbs and a setback capacity of
600,000 lbs., Includes a complete set of hand rails and wind walls 8’ high.
V-Door & Catwalk
5’ wide x 18” high x 50’ long catwalk, Cable trays to accommodate air, fuel, water, and
electrical cables.
Drilling Line
1-3/8” drilling line
Drilling Line Spooler - Air powered drill line spooler is designed to accommodate
7500’ steel drill line spool.
Generator Unit
3 Caterpillar 3512C diesel Tier II EPA certified diesel engines, turbocharged
and aftercooled, rated at 1476 hp each @ 1200 rpm with complete instrumentation
packages and automatic shut down systems. Started by 60 to 150 psi airstarters.
Cooled by Mustang conventional style split core radiators (56 square feet) with 2
circuits for engine coolant and aftercooler. Engines each drive a Cat SR4B,
1750 KVA, 2 bearing, 1225 KW, 867 frame, 0.7 PF, 600 volt, 60 cycle generator
complete with stator RTD’s, space heater, bus bar and cable access box.
SCR Unit
Omron 4x4 SCR system powered by 3 Caterpillar 3512C diesel engines with a
spare bay for an additional generator. The SCR House is 10‘ wide x 40’ long x 10’-6” high,
with a plug panel and air conditioning system. System includes 1 x 1000 KVA,
600:480 volt, 3-phase motor control center, a 480 volt motor control center to operate
the auxiliary equipment, 1 x 150 KVA, 600:120Y208 volt, All new external cable
trays to accomodate air, fuel, water, and electrical cables.
Traveling Equipment
Oilwell 500-ton traveling block with (6) sheaves grooved for 1
3/8” line and National 500 ton hook
Rotary Equipment
Lanzou 37 - 1/2” 500 ton capacity rotary table, chain driven from drawworks,
With anti-slip floor matting
Swivel - EMSCO LB-500, with a 500 ton rating.
Mud System
Mud Pumps - (2) Weatherford MP-16 single acting triplex slush pump,
1,600 HP. Each powered by 2 x GE 752 DC traction motors. Charged by
6 x 5 pumps each powered by a 50 hp, 1200 rpm, 480 volt, 3 phase AC motor.
Each pump equipped with Weatherford 20 gal discharge pulsation dampener.
Mud Tanks - 2) Tanks with 1,040 bbls total capacity. Pits have 5/16”
crimped walls and 6” square tubing rims. Each tank compartment has a
mud gun and equalizer valves. A 16” x 18” trough runs the length of each
tank. The shaker tank has four compartments with 520 bbl capacity with 2
Derrick 503 High G shakers, O’Drill/MCM 2 cone desander and O’Drill/MCM
12 cone desilter. The shaker tank has 2 each 8” x 6”centrifugal pumps with
mechanical seals driven by 75 hp, 1800 rpm, 480 volt, 3 phase AC motors
and includes a mud / gas separator. The 3 compartment suction tank includes
a 60 bbl pill pit. There is a 10 hp agitator in the last compartment of the shaker
tank and each compartment of the suction tank. The mud mixing hopper can
suck or discharge to any compartment in the suction tank. High pressure
system is 4”, 5000 psi.
Auxiliary Equipment Storage :
Air Compressors—Service Air - 2 Gardner-Denver HRA2512S compressors
each powered by a 25 hp, 480 volt, 3 phase AC motor. Each complete with a
120 gallon receiver. Dried and cooled with a Gardner Denver RNC-125
refrigerated air dryer.
Air Compressor—Cold Start - Gardner Denver HDR5-3 self contained
cold start unit powered by a Lombardini 9 hp diesel engine. Capacity is
16.5 cfm at 125 psig.
Dog House - 8’ wide x 34’ long x 8’ high doghouse with knowledge box and
workbench.
Change House - One 10’ wide x 38’ long x 8’ tall parts and change house
with lockers and shelving. There is also a small parts storage area on the end.
Fuel Tank- One 8’ diameter x 30’ long fuel tank with 2 Roper AMD-27 gear
pumpsdriven by 3 hp, 1800 rpm, 480 volt, 3 phase, explosion proof motors.
Water Tank - One 10’-6” diameter x 32’ long water tank including 2 3” x 2”
centrifugals. Each pump is powered by a 25 hp , 1800 rpm, 480 volt,
3 phase AC motor.
Accumulator Unit and Control
(5) station Consolidated Pressure Controls system including annular
pressure control with 220 gallon capacity. Unit includes UET25-B triplex
pumps with 1.25” plungers and 2 Speed-Flo air pumps. System includes
a 150’ air umbilical attached to a remote control panel on the rig floor.
Safety and Floor Valves
Subs for the Handling Equipment - Handling tools, slips and
elevators to suit tubular inventory, Bit Subs, Cross over subs,
Lifting subs, Pipe Rack
Drilling Floor Equipment – Slips, Elevators, Tongs, Spinning Wrench:
Catheads - Type 37 AK Foster make-up cathead and Type 24AK break
out cathead.
Wire Line Unit - Five star surveyor wire line unit with 20 HP, 1,800 RPM
motor with one line guide & 20,000’ of .092 wire line.
Dog Collar Safety Clamps
Kelly Spinner - 5-1/4” Hex Kelly x 46’ length with Varco HDP Bushings
Additional Equipment Included:
Spare parts:
Transformers - 3-phase, 60 cycle lighting transformer and a 42 circuit,
120Y208 volt lighting panel
Junk Basket:
Forklift - Caterpillar 950 or similar forklift for jungle and rainy/muddy operations
Manlift - 40’ reach man-lift for safe operations at height.
Winches - Ram-Winch-Houston TX, Model: AG74352
Container - Spare parts
Miscellaneous
All components are mounted on 3 runner oil field skids with loading hitches designed
for tail boarding. All new cable trays build to accommodate air, fuel, water and
electrical cables. Walking areas are decked with ¼” plate and 3/8” plate around
the rotary table
Price & terms : Please enquire using the email form below.
If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.
We can arrange delivery of equipment and towage of rigs and vessels where needed.
The details mentioned above are believed to be accurate but are not guaranteed.
---------------------------------------------------------------------------------------------------------------
Search words (for official use only) :
OIME 2000 Land Drill Rig for Sale
2000hp SCR Drilling Rig for Sale in USA
SCR Drill Rig for Sale
Land Drill Rig with 2007 Built Components
OIME Drilling Rig 2000 hp for Sale
Good Condition Land Drill Rig in USA
OIME 2000 SCR Drill Rig for Sale
--------------------------------------------------------------------------------------------------------------- |