Worldrigs ID: WR1815

Twin Screw Fixed Pitch Tug Boat for Sale
Twin Screw Tug Boat 2006 Built for Sale

Description :

Type : Twin Screw Fixed Pitch Tug
Dimensions : 30m x 10m x 3.50m
Class : NKK
Build : 2006
Accom / Pax : 12
Machinery : 2 x Mitsubishi S6R2-MTK3L
Speed : 12
Capacities : 
FW Capacity: 40 Tons
FO Capacity: 22O Tons

Others : FIFI

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------------------
Search words (for official use only) -
2006 Built Tugboat for Sale
Twin Screw Tug Boat for Sale
12 Passenger Accommodation Twin Screw Tug Boat
2006 Built Twin Screw Fixed Pitch Tug Boat
30m Twin Screw Tug for Sale
-----------------------------------------------------------------------------------------------------

Worldrigs ID: WR335

Military Hospital & Medical Units
Hospitals in containers for Oilfields
Hospitals on Trailers For Mines & Deserts

Following are some of the sample units that we have for sale.
Specific requirements have to be discussed.

Operating Theater
20" Steel Container :
One side expandable
Dismountable levelling jacks at four corners

Tent with metal structure : 27 sqm total area
Built-in AC 36,000 BTU : (Heating / Cooling)
Ventilation : With filtration
Air sterilization : 4 HEPA filters
Built-in water tank : 100 lt
Water heater : Electric powered
Water treatment system : Reverse Osmosis

Piping and Fittings : Potable water / waste water
Back-up generator : Diesel 6 kva
Electrical installation : Distribution panel, cabling,  earthing
PVC inner surface coverings : anti bacterial, anti static
Inner illumination : IP 65 lamps
External power connectıons : Inlet / outlet

Medical gas system :
2 overhead pendants with oxygen,
nitrogen, medical air 4, vacuum

Intensive Care Unit
20" Steel Container : One side expandable
Dismountable levelling jacks at four corners
Tent with metal structure : 20 sqm total area
Built-in AC 36,000 BTU : (Heating / Cooling)

Ventilation : With filtration
Air sterilization : 4 HEPA filters
Built-in water tank : 100 lt
Water heater : Electric powered
Water treatment system : Reverse Osmosis

Piping and Fittings : Potable water / waste water
Back-up generator : Diesel 6 kva
PVC inner surface coverings : anti bacterial, anti static
Electrical installation : Distribution panel, cabling, earthing
Inner illumination : IP 65 lamps

External power connectıons : Inlet / outlet
Medical gas system : 2 overhead pendants with oxygen,
nitrogen, medical air 4, vacuum

Care Connections Container
20" Steel Container : Dismountable levelling jacks at four corners
Joining tubes : Flexible
Built-in AC 18,000 BTU : (Heating / Cooling)
Ventilation : With filtration
Built-in water tank : 100 lt

Water heater : Electric powered
Water treatment system : Reverse Osmosis
Piping and Fittings : Potable water / waste water
Electrical installation : Distribution panel, cabling, earthing

Inner illumination : IP 65 lamps
External power connectıons : Inlet / outlet
Medical gas transfer system : copper pipes
Medical gas transfer system : anti bacterial, anti static

Connection Container
20" Steel Container : Dismountable levelling jacks at four corners
Joining tubes : Flexible
Built-in AC 18,000 BTU : (Heating / Cooling)
Ventilation : With filtration
Built-in water tank : 100 lt
Water heater : Electric powered

Water treatment system : Reverse Osmosis
Piping and Fittings : Potable water / waste water
Electrical installation : Distribution panel, cabling, earthing
Inner illumination : IP 65 lamps
External power connectıons : Inlet / outlet
Medical gas transfer system : copper pipes
PVC inner surface coverings : anti bacterial, anti static

Radiology Container
20" Steel Container : Dismountable levelling jacks at four corners
Joining tubes : Flexible
Anti-radiation shielding : lead sheets (1,5 mm) covered on all sides
Built-in AC 18,000 BTU : (Heating / Cooling)
Ventilation : With filtration, additional floor level aspiration

Built-in water tank : 100 lt
Water heater : Electric powered
Water treatment system : Reverse Osmosis
Piping and Fittings : Potable water / waste water
Electrical installation : Distribution panel, cabling, earthing
Inner illumination : IP 65 lamps
External power connectıons : Inlet / outlet
PVC inner surface coverings : anti bacterial, anti static

Supply Container
20" Steel Container : Dismountable levelling jacks at four corners
Joining tubes : Flexible
Built-in AC 18,000 BTU : (Heating / Cooling)
Ventilation : With filtration
Built-in water tank : 2 tonnes
Waste water tank : 2 tonnes
Water heater : Electric powered

Water treatment system : 4 level filtration + Reverse Osmosis
Piping and Fittings : Potable water / waste water
Diesel generator : 20 KvA
Electrical installation : Distribution panel, cabling, earthing

Inner illumination : IP 65 lamps
External power connectıons : Inlet / outlet
Medical gas transfer system : copper pipes
PVC inner surface coverings : anti bacterial, anti static

Price & terms : Please enquire using the email form below.

If you cannot find the Mobile Hospital Unit that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of containers where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------
Search words(for official use only) -
Trailer Hospital Containers
Mobile Hospital Trailers
Hospital Containers on Trailers
Medical Radiology units on Trailers
Mobile Operation Theaters
Mobile ICU units
Mobile Intensive Care Units
Trailer Medical Units
Military Medical Units
Oilfield Operation Theaters
Remote Mobile Hospitals
Oilfield Hospitals
Desert Hospitals & Medical Units
-------------------------------------------------------------------------------

Worldrigs ID: WR1209

Ingersoll-Rand DM25SP, Rotary Blast hole Drill Rig for sale
Used Drilling Rig for sale in Australia
Drilling Rig - Ingersoll-Rand DM25SP - 1996 Built

Model : DM25SP, Rotary Blast hole Drill Rig
Manufacturer : Ingersoll-Rand
Year : 1996
Condition : Used

Description :

1996 Ingersoll-Rand DM25SP, Rotary Blast hole Drill Rig
Powered by Cummins N14 Diesel Engine @ 450 HP
Down The Hole (DTH) Single Pass
IR HR2 - 800 cfm / 350 psi Air Compressor
Starts and Moves but not operational
operating weight of 30,000kg
5,000 lb pull down and
Dual pole battery isolators lockable
Ground level emergency stops
Heldweld safe access steps (retractable)
600mm cab access walkways etc.
MDG 15 compliances
Location : Australia

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

         

---------------------------------------------------------------------------------------------------------------------------
Search words(for official use only) :
Ingersoll-Rand DM25SP Drilling Rig for sale
Used Drilling Rig for sale in Australia
Used 1996 built Rotary Blast hole Drilling Rig
Ingersoll-Rand DM25SP, Rotary Blast hole Drill Rig
Land Drilling Rig for Sale - 1996 built
Used Rotary Blast hole Dril for sale in Australia 
Ingersoll-Rand Rotary Blast hole Drill Rig
Ingersoll-Rand DM25SP for Sale - Drilling Rig
Drilling Rig - Ingersoll-Rand DM25SP - 1996 Built
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR850

Ingersoll-Rand DM25 Used Drilling Rig  For Sale
Used Drilling Rig 1985 Built - for sale

Model : DM25
Manufacturer : Ingersoll-Rand
Year : 1985
Condition : Used

Description : 

1985 Ingersoll-Rand DM25 track drill rig
Multi-Pass
IR 750 cfm / 350 psi air compressor
Cummins Diesel engine
Repacked cylinders on mast
Repacked three (3) leveling jacks
Repacked 3 pumps,
five (5) rod carousel
Dimensions : 36' L x 11' 10" W x 14' 6" H
Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

         

---------------------------------------------------------------------------------------------------------
Search words(for official use only) :
Ingersoll-Rand DM25 Drilling Rig for Sale 
Used Drilling Rig Ingersoll-Rand DM25 For Sale
1985 Built Drilling Rig for Sale in USA
Used Drilling Rig 1985 built Ingersoll-Rand DM25
Land Drilling Rig For Sale 1985 built
Used Ingersoll-Rand DM25 drilling rig for Sale
---------------------------------------------------------------------------------------------------------

Worldrigs ID: WR792

Failing 1250 Drilling Rig & Water Truck for Sale
Used Drilling Rig - Failing 1250 for Sale

Model : 1250 Drill Rig
Manufacturer : Failing
Condition : As-Is

Description :

(1) Failing 1250 Drill Rig (being sold for parts)
No Rotary Table
No Mud Pump
No Transfer Case
No Kelly
No Chains
(Basically If You Need A Tower Or Something)
Mounted on a International Truck
Diesel Engine
(1) International 1500 Galloon Water Truck
10 Wheel
Water tank built to bed -O- to haul from pipe beside tank

Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

Worldrigs ID: WR488

Drilling Rig - Speedstar SS-15 II For Sale
Speedstar SS-15 II Drilling Rig 1977 Built for sale

Model : SS-15 Drill Rig
Manufacturer : Speedstar
Year : 1977
Condition : Used

Description :
1977 Speedstar SS-15 II Drill Rig
Mounted on a 1977 GMC Truck
13 Speed transmission
Rig Serial #: 7154
4 1/4" Kelly
18 GPM John Bean water injection system
Double Drum Drawworks with air clutches
Sandreel
Table Drive
750 cfm / 300 psi Sullair air compressor/low hours installed prior to purchase in 2002
C60 Engine, Easy start, runs great, burns no oil
Table Drive, 8 1/2" opening, hydrostatically driven
Air Controls
Easy load, Rod tray with 17 pieces of 3-1/2" API x 4-1/2" OD x 20' Rods (340') 
in rack + 25 foot Kelly Bar/365' ft total

Line oiler, electric/air
4 hydraulic leveling Jacks
35' mast height above table
Safety Shut Down
Machine runs exceptionally well
6" Bit basket
10" Bit basket
Pipe rollers
Drill Rod Clamps
Chain Wrench
260' ft of additional drill rod available at an extra cost 

Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.



---------------------------------------------------------------------------------------------------------------------------------
Search words(for official use only) -
Speedstar SS-15 II Drilling Rig For Sale
Drilling Rig Speedstar SS-15 II 1977 Built for sale
Used Drilling Rig Speedstar SS-15 II for sale
Used Speedstar SS-15 II Drilling Rig for sale in USA
Land Drilling Rig For Sale
1977 Built Speedstar SS-15 II Drilling Rig for sale
-----------------------------------------------------------------------------------------------------------------------------------------

Worldrigs ID: WR1622

New Fabricated ASME Pressure Vessels for sale
ASME Pressure Vessels for Sale

ASME pressure vessels and production equipment serving oil and gas producers,
midstream gathering and processing entities, and downstream distributors and marketers.

Specialized in large diameter and heavy wall pressure vessels and can deliver standard
size NGL and LPG bullet tanks - both new and used - up to 120,000 gallons, with short
lead times.

Capabilities
ASME S, U, U2, U3, PP and R certifications
Custom fabrication of oil and gas process vessels, production equipment
Turnkey logistics support from heavy hauling to vessel installation
Seasoned engineering design team

State-of-the-art ASME manufacturing plant is located in Texas.
Situated on 100 acres, the 125,000 square foot fabrication facility and 33,000 square foot
paint facility offer convenient access to Texas State Highway 35, BNSF and Union Pacific
Railroads, and the ports of Houston and Corpus Christi.

Please send us an email using the below form telling us your requirement and we shall offer you.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------
Search words (for official use only) :
Fabricated ASME Pressure Vessels for sale
New ASME Pressure Vessels for sale
ASME Pressure Vessels - New - For Sale
Pressure Vessels for Sale
-------------------------------------------------------------------------------------------

Worldrigs ID: WR2935

Diving Support Vessel for Charter
DSV for Charter

General
Build Year : 2018
Classification : DNV-GL & CCS

Power Generating Plant (ROLLS-ROYCE/Zhenjiang Cummins)
4 x 3490 ekW diesel generator sets, 720 rpm, 690V/60Hz   
1 x 900 ekWharbour generator set, 1800 rpm, 690V/60Hz   
1 x 450 ekW emergency generator set 1800 rpm, 450V/60Hz   
1 x 750 ekW emergency generator set for dive eqt., 1800 rpm, 450V/60Hz

Propulsion System （Rolls-Royce）
2 x 3200 kW CCP main azimuth thrusters aft   
2 x 1600 kW CCP tunnel thrusters forward   
2 x 1400 kW FP retractable azimuth thrusters forward
Electric Propulsion System (ROLLS-ROYCE)

Tank Capacities   
Fuel Oil abt. : 1800 m³
Potable Water abt. : 1000 m³

Dual Class DNV-GL/CCS
DNV-GL+1A1, E0, SF, DYNPOS-AUTRO, SPS, Clean Design,
NAUT-AW, DK(+), HELDK-SH, Crane, COMF V(3)-C(3), BIS,
DSV-SAT, DSV-SURFACE, BWM-T, Recyclable, ECA(SOx-A)
CCS corresponding notations   
ERN 99,99,99,93
IMO res. MSC 266(84) Code of Safety for Special Purpose Ships

Accommodation
Accommodation : 120 Persons   
Single Cabin : 46   
Double Cabin : 37   
Messroom with Self-serving Area   
4 Lounges   
Clients Office   
Offline Room   
2 Conference Rooms   
ROV Control Room/OnlineRoom   
3 Project Offices   
Shift Supervisor Office   
Dive Technician Office   
Cinema/Briefing Room   
SAT Control Room   
Dive/Bell Control Room   
Hospital/Wardrobe/Gymnasium /Smokers Room   
    
Safety Equipment (ZMAMW)
2 x 120 men life boats (82.5 kg/person)   
Life rafts w/ launching appliances as per SOLAS   
According to SOLAS for the specified class and number of crew   
2 x FRC (One as per SOLAS and one as per IMO Res 266(84)SPS Code)

Navigation And Radio Communication
(CTTIC Shanghai/Hangzhou Huayan)
Equipment according to GMDSS regulation, Area 3           
Two radars, 3x Gyro Compasses, Seapath 300; Auto pilot,
DGPS; Two electronic chart systems           
system + CCTV (CTTIC Shanghai); Calling, Command,
Tel. (Hangzhou Huayan)           
    
Main Characteristics   
Length Over All (L.O.A) : 124.0 m
Breadth Moulded : 24.0 m
Depth to Main Deck : 10.2 m
Max Draft Approx. : 7.3 m
Deck Area aft of Dive Hangar : 900 m²
Endurance : 45 days
Speed at 6.0m draft abt. : 14.5 knots

Dynamic Positioning System（ROLLS-ROYCE）
Dynamic positioning system III (DYNPOS-AUTRO/CCS DP3)   
2 HPR trunks   
3 DGPS   
Lazer based reference system   
3 x MRUs   
2 x Taut wires   

Anti-Roll/Anti-Heel
Three passive anti rolling tanks; Four anti-heel tanks   

Helicopter Deck (Yantai North Sea)
Sikorsky S-92
Rules : CAA UK CAP 437, DNV HELDK-SH, China Aviation Authorities

Offshore Cranes (NOV/WEST Marine)
Main crane (AHC) (NOV) :
250t @ 12.5m Subsea lift, single fall, 3000m travel (AHC), electro-hydraulic
Whip line : 20 t @ 40m, subsea lift 2000m travel (AHC)
Personnel lift : 10t (whipline)
Secondary crane (WEST Marine) :
30t @ 12m Subsea lift, single fall, 1000m travel, electrohydraulic
Personnel lift : 15t (whipline)
Aux. Offshore crane (WEST Marine) :
5t @ 15m Subsea lift, single fall, 350m travel, electrohydraulic
Personnel lift : 1t

ROV/Launch And Recovery Systems (LARS)
(kONGSBERG)
Fully enclosed double WROV hangar and separate ROV workshops   
1 x WROV for launching through moonpool 3000m(Moonpool 4.9x4.9m)   
1 x WROV for launching over side 3000m   

Dive Equipment (Drass Italy)
Drass 24 Men SAT dive system   
Two bottom mated bells   
4 x 6 men DDC Chambers   
2 x TUP   
2 x 24 Men hyperbaric life boats (SPHL)   
1 x ø2000mm DDC Chamber for Air dive   
2 x A-frames for Air dive   
Gas bottles for 24 men in 21 days/at 300m depth   
2 x Moonpool, Sized: 3.9 m x 3.9m

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

--------------------------------------------------------------------------------------------------------
Search words (for official use only) -
2018 Built Diving Support Vessel for Charter
DNV-GL & CCS Classed DSV for Charter
DSV - 2018 Built - For Charter
120 Persons Accommodation Capacity DSV for Charter
124m DSV for Charter
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR376

Accommodation / Work Barge for sale
400 Pax Accommodation Barge
Convertible to Pipelayer Accommodation Barge for Sale

General 
Built : 2010
Classification : American Bureau of Shipping
Notation : ABS + A1 Accommodation Barge

Principal Particulars
Length : 113.08 m
Breadth : 28.50 m
Depth : 7.30m
Draft : 4.5 m

Tonnage
Gross / Net / Dwt : 10392 T / 3117 T / 8034.61 T

Cargo Capacity
Deck Space / Strength
Deck Area : 1850 m2
Deck Strength : 15 T / m2

Bulk Cargo    Storage Capacity  Discharge Capacity
Fuel Oil          1000 m3             80 m3 / hr @ 60 m head 2 x 10 M3/HR @ 30
Fresh Water    2186 m3            120 m3 / hr @ 60 m head
Ballast Water  8727 m3            2 x 350 m3 / hr @ 60 m head
Blige                                       2 x 150 m3 / hr @ 40 m head
Domestic Fresh Water             4 x 30 m3 / hr @ 70 m head
and Sea Water

Mooring System
Mooring Points : 8 nos.
Winch Drum : 8 nos. Singe drum ; Electro-Hydraulic
Winch Drive : Motor Driven
Line Pull : 90 T ; 12 m / min @ 1st Layer (1st Speed)
Brake Capacity :  150 T ; Static @ 1st Layer
Anchors :  9 nos. ; 10 T (Flipper Delta)
Anchor Wire :  8 Coils, 52 mm SWR ; 1500 m (L)
Pennant Wire :  9 nos., 52 mm SWR ; 130 m (L) Each
Anchor Marker Buoys : 9 nos. Foam Filled ; 2.45 m (L) x 1.83 m (Dia)
Tugger Winch :  2 nos. ; 10 T (Engine Driven), 5 T (Motor Driven)
c/w tension sensors, wire length counter, 16 vertical sheaves, 8 Universal
fairleaders

Helideck
Suitable for Sikorsk S92
Length : 25.62 m
Breadth : 25.62 m

Facilities (Living, Working & Other)
Accommodation : 400 Persons
Client Office : 4 nos.
Barge Master Office : 1 no.
Conference Room :  1 no. , 20 Persons Capacity
Radio Room :  1 no.
Control Room : 1 no.
Hospital :  1 no. ,3 Beds
Dinning Room (Officers) : 1 no. ,36 Persons Capacity
Mess Room (Crew) :  1 no. ,  150 Persons Capacity
Laundry Room : 1 no.
Change Room :  1 no.
Recreation Room : 2 nos. , Each 48 Persons Capacity
Gymnasium : 1 no.
Prayer Room :  1 no.
Dry Provision Room :  2 nos.
Air Conditioning Unit : Centralized Comply to ILO 92, IMO
Meat / Fish Chiller : 50m3
Vegetable Freezer : 50 m3

Machineries & Equipment
Generators
Main Genset :
Engine - 3 nos., Each 1000 KVA
Cummins KTA -38-DM  440 V, 3 Ph, 60 Hz
Alternator - Stamford

Emergency Genset :
Engine - 1 no., Cummins 250 KVA
NTA 855-DM  440 V, 3 Ph, 60 Hz
Alternator - Stamford

Air Screw Compressor : 
1 no. (Motor Driven)
294 m3 / hr (1 Cyl /1 Stage) @ 13 bar

Fresh Water Maker :
2 nos. x 50 m3 / day
Reverse Osmosis (Hansun)

Sewage Treatment Plant :
2 nos. x 200 men, 200
WCB - Jiangsu Nanjing Mechinary,

Oil Water Separator
1 no. (3 m3 / hr @ 15 ppm alarm)
IOPP :  Comply
Workshop :  1 no.

Deck Crane
Pedestal Mounted Techcrane 500-160
Capacity : 250 T
Boom Length :  160 Ft (49 m)

Communication & Navigation System
GMDSS Set : Area Comprising A1, A2 & A3
SSB Radio :  1 no. ,  Furuno FS 2571C
Navtex Receiver : 1 no., Furuno NX-700
Inmarsat F :  1 no.,  Furuno Felcom 15

VHF Air Band T'receiver : 
1 no. ,  Icom IC A110
1 no. ,  Icom IC - A24 (HLO)

VHF Radio : 2 nos., Furuno FM 8800S with built-in DSC
Portable VHF Radio (GMDSS) : 3 nos. , ACR
Portable Marine VHF :  8 nos,  Motorola GP-328
Radios :  16 nos. , Motorola GP-328
Intercom & PA System : Entire barge
Satelite Phone, Fax & Email : One - Mini M One FBB , Sailor Thrane & Thrane
GPS :  1 no., Furuno GP150
Radar :  1 no. , Model: FR7062, Type: RDP-122, Furuno
Satelite Compass (GYRO) : 1 no., STD 22, Raytheon Anschutz
Magnetic Compass :  1 no,  Portable
Echo Sounder :  1 no.,  Furuno FE700
VHF for Crane : 1 no., Motorola GP-328
Radio Beacon Transmitter : 1 no.,  Nautel ND500II
Weather Fax :  1 no.,  Furuno FAX 207
Anemometer & Clinometers : 1 no. & 4 nos.
Barges also fitted with PA Talkbalk System and Sound Powered Telephones & CC TV Systems

Safety (FFA & LSA)
FFA (As per Solas) :
Fire Pump : 1 no. (Electric Driven), 300 m3 / hr @ 90 m head
Emergency Fire Pump : 1 no. (Engine Driven), 300 m3 / hr @ 80 m head
Fixed Foam Fire Fighting : Foam Tank Capacity : 400 Liters For Helideck
Fire Monitors : 2 nos., 140 m3 / hr @ 7 bar
Fire Hydrants : 41 nos., As per FFA plan
Intl. Shore Connection : 2 nos.,  As per FFA plan 

CO2 System :
Area Protected = Generator room, paint
store & galley duct
Sinoking

Automatice Water Sprinkler System :
Area Protected = Entire accomodation area,
including paint store galley and workshop
1 x 150 m3/hr @ 80m head

General Alarm, Fire Detection System :
Area Protected = Entire barge

LSA (As per Solas) :
Rescue Boat :  1 no., 8 Persons Cap. c/w davit
Life Raft : 36 nos. (25 men capacity) , Total Cap. 900 persons (both sides)
Life Jackets :  550 nos., 150 % of the maximum
POB carrying capacity
Life Buoys with MOB : 4 nos., Mounted as per Barge Safety Plan 
Life Buoys with SI Light :  10 nos., Mounted as per Barge Safety Plan
Life Buoys with Line : 2 nos, Mounted as per Barge Safety Plan 
Life Buoys : 8 nos. , Mounted as per Barge Safety Plan
EPIRB :  2 nos., ACR Electronics, RLB 32
SART : 2 nos., ACR Electronics, Pathfinder 3
Line Throwing App. :
2 Sets Comprising of 4 Cartridges Each
1 no. Comet and 1 no.
Pains Wessex

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------------------
Search words (For official use only)
Accommodation Barge for Sale - 400 pax
400 Men Accommodation barge for Sale
Work barge for Sale
400 Men Work barge for sale
400 Men Accommodation/Work Barge for Sale
 Work barge for Sale - 400 Pax
-----------------------------------------------------------------------------------------------

Worldrigs ID: WR2629

Chicago Pneumatic 650 S/S Drilling Rig for Sale
Drilling Rig - Chicago Pneumatic 650 S/S for Sale

Model : 650 S/S Drill Rig
Manufacturer : Chicago Pneumatic
Condition : Used

Description :

Chicago-Pneumatic Model 650 S/S Drill Rig
No Engine currently on deck, but 2 spare Caterpillar 3406 diesel
engines are included
- 1 engine is said to have been rebuilt but we have not tested
- 2nd engine has a hole in block but will also be given with drill so
  you may salvage other parts from it as needed
750 CFM / 125 PSI C05 Air Compressor
Dynex main pump, Dynex Head motor
Gearmatic Hydraulic winch
27,500 lb. pullback capability
DTH Hammer oiler (lubricator included but needs re-installed)
4-hole Funk Box (hydraulic pump drive)
6-pod drill pipe carousel (needs re-assembled and re-installed)
3 Hydraulic jacks
3 pieces of 25 ft. drill pipe included
Mounted on a 1978 CCC (Crane Carrier Company) truck
powered by Caterpillar 3208 diesel engine - showing only 5136 miles on
odometer
Carrier hood and fender need re-installed, comes with spare on-road fuel tank

Location : USA

Price & terms : Please enquire using the email form below.       

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Chicago Pneumatic Used Drilling Rig for Sale
Used Drilling Rig - Chicago Pneumatic for Sale
Used Chicago Pneumatic 650 S/S for Sale
Chicago Pneumatic Land Drilling Rig for Sale
Chicago Pneumatic Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR597

UMD 180 Land Drilling Rig for Sale
New Semi Mobile Drilling Rig For Sale - UMD 180

Main Technical Specifications
Engine type : 2 X C 15 ACERT
Nominal engine power hp (kW) : 2 X 475 (2 X 354)
Transmission : 2 X Allison 4700 OFS
Nominal hoisting capacity metric ton (lbs) : 180 (396000)
Workover  depht (m) drill pipe (2 7/8”) : 8000
Drilling depht (m) (4 1/2“) : 3300
Rope diameter (mm) : 29
Mast height (m) : 36
Drilling floor height (m) : 5-6
Travelling system : 5x4
Working pressure (mpa) : 0, 65-0, 8

Technical Specifications
Drawworks
Main Drum -
Input power (hp) : 1000
Barrel size : D24”  W42”
Brake rim size : D44” W12”
Wire line size : 1 1/7” (29 mm)
Drum speed : 7F/1R
Brake cooling : Water circulation
Lubrication : Automatic or manual
Drum clutch : Air flex type
Brake system : Band / disc / auxiliary (Parmac SSR-28 hydro-brake)
Chain drives : All chains are fully encloded for oil bath lubrication ensuring
longer life and cleaner operation

Sand Line Drum -
Barrel size : D13”  W37“
Brake rim size : D44” W9½”
Spooling capacity : 16114’
Sand line wire size : 9/16” (14 mm) - 5/8” (16 mm)

Rig Power & Transmission
Diesel engine(s) : 2 x Caterpillar C-15 ACERT, 540Hp, 2.100rpm
Transmission(s) : 2 x Allison OFS 4700 series with torque converter
Right angle gear box : Min 1000 hp gear box in oil bath gear case
Compound box : Twin engine drive through transmission includes disconnect
clutches at compound shaft for engines

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
-----------------------------------------------------------------------------------
Search words(for official use only) :
UMD 180 Land Drilling Rig For Sale
UMD 180 Semi Mobile Drilling Rig For Sale
New Semi Mobile Drilling Rigs
Land Drilling Rigs For Sale
New Land Drilling Rig
 ---------------------------------------------------------------------------------

Worldrigs ID: WR2968

Chocks for Deck mounting According to DIN 81915 for Rent

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Panama Chocks for Deck mounting for Rent
Used Chocks for Deck mounting for Rent
Chocks for Deck mounting According to DIN 81915 for Rent
Chocks for Rent
Used Panama Chocks for Deck mounting for Rent
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR1328

Worldrigs ID: WR2708

Hitachi EX 1200 Excavator for Sale
Main Particulars
Year of Construction : 1997 refit 2005
Classification : Pontoon, Deep Sea, assisted propulsion, unrestricted

Dimension
LOA : 55.15m
Length BPP : 53.08m

Beam :
15.20m with side pontoons
11.40m without side pontoons.

Draft with Excavator : 3.136m
Deck Load : 10T/m2

Equipment
Spuds : 4 stabilising spuds (1.2x1.2m)
Hydraulic Power : 2x 1200HP
Electric Power : 400KVA 400V 50HZ
Harbour Generator : 100KVA 400V 50HZ
Emergency Generator : 45 KVA 400V 50HZ
Ballast System : 120m3/hour, 7 ballast tanks
Heila Crane : 15 ton, 15m reach, type HMR150
Anchors : 2x anchor winches with 2 ton anchors                       
Accommodation : 6x Single Cabins

Excavator
Make : HitachiEX 1200-5
Year : 2007
Weight : 170 ton
Engine Power : 567 KW
Maximum Dredging : depth18Mtr
Bucket Size : 4m3 & 6m3
Boom : Triple Boom
Stick : Short 5.5m – Long 8.5 m

Extras

Price & terms : Please enquire using the email form below.      

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
1997 built Dredger for Sale
Hitachi EX 1200 Excavator for Sale
55.15m Dredger - For Sale
Refit 2005 Dredger for Sale
Used Dredger for Sale
Excavator - 2007 Built - For Sale
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR1533

120M Pipelaying Barge for Lease
Un Propelled Pipe-laying Barge for Hire

Principal Particulars
Length OA : 120.00m
Beam mld : 31.70m
Depth mld : 9.00m
Draft designed : 6.00m

Complement :
10 x 1 man = 10 men
20 x 2 men = 20 men
60 x 4 men - 240 men
--------------------------------
Total = 290 men

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------------
Search words (for official use only) :
120M Pipe Laying Barge for Lease
Pipelaying Barge for Hire
Un Propelled Pipe-laying Barge for Lease
Used Pipe-laying Barge for Charter
290 Men Pipe Laying Barge for Hire
120M Pipelay Barge for Charter
---------------------------------------------------------------------------------------------------------------

Worldrigs ID: WR171

Nitrogen Compressor Unit for sale
Nitrogen Generator For Sale

Main components:
Screw Compressor Type SIGMA 4G
Piston Compressor Type BS302
Diesel-Type Caterpillar C-32

The unit is designed for following operating data:
21 m3/min = 740 cfm +/- 5% Nitrogen with 95% purity and a discharge pressure 
of 351 bara = 5000 psi

The unit will be driven by a diesel engine. Screw and piston compressors are directly 
coupled on one shaft-end of the prime mover for a synchronous output. An electric 
Generator is coupled on the second shaft end of the prime mover.

The compressor unit is installed in a container and suitable for heavy duty 
oil/gas-field operation.

The control system of the unit will be fully- automatic for heavy duty operation.

The cooling system consists of three closed separate circuits. The screw-oil is 
cooled with a direct oil/air-heat exchanger. The compressor coolant (water with antifreeze) 
and the diesel-engine coolant (water with antifreeze) are cooled with one common 
coolant/air-heat exchanger each.

The ambient as well as the suction temperature will be in the range of -40°C +35°C. 
The operation of the compressor unit is allowed at temperatures inside the container 
above +2°C.

The unit is completely assembled on common base frame and will be tested under 
full load before shipment ex works.

The unit is designed, manufactured and tested in accordance with valid and applicable 
standards as DIN, VDI, VDE-ÖVE, IEC, ISO and QA-System which has been certified by 
DNV corresponding to ISO 9001.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------
Search Words :
Mobile Compressor Unit for Sale
Truck mounted Nitrogen Compressor Unit
Nitrogen Generator Unit for sale
Portable Nitrogen Generator Unit
Coiled Tubing Unit
Nitrogen Pumper for sale
High Pressure N2 Compressor Unit
---------------------------------------------------------------------------------

Worldrigs ID: WR257

Floating Dock For Sale
Floating Dock 2008 Built - For Sale

Specifications

Type : Floating Dock 
Built : 2008
Class : KR / DWT : 25,000 ton

Length overall deck(with platform) : 230m
Length of pontoon : 210m
Breadth between outer tower walls, moulded : 47m
Breadth between inner tower walls, moulded : 39.20m

Height of working deck at center line, moulded : 6.25m
Height of safety deck, moulded : 16.25m
Height of top deck, moulded : 19.75m
Maximum immersion draft from base line :15m

Capacities
F.O Tank :50㎥
F.W Tank :75㎥
Ballast Tank : 55,000㎥

Mooring Winch
Type and No. of unit : Elec.-hyd. Type, 4sets
Capacity : 15/30Ton x 16/8 m/min

Composition :
Hawser drum 1ea
Warping end 1ea
Brake and Clutch

Generators:

Power Generator
Type : Drip-proof, closed,Self-regulated and self-ventilated
No. of set :Two(2)
Output : 750W Voltage : AC6600V Revolution : 1800RPM

Generator Diesel Engine
Type : 4-Cycle, direct injection , single acting, trunk piston type
No. of set : One
Output : 1100PS
Revolution : 1800RPM

Ballast Pump
Type : Electric, centrifugal
No. of set : Four
Capacity : 3,000m3/h x 15m x 175Kw
Operation Method : Electric motor driven

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------
Search Words(for official use only) :
Floating Drydock For Sale
Used Floating Dock for sale
25000T Floating Dock For Sale
2008 built Floating Drydock for Sale
---------------------------------------------------------------------

Worldrigs ID: WR1245

Vacuum Truck for Sale - 2003 built
Used Vacuum Truck - For Sale

Specifications
Year of manufacture : 2003
MAWP : 14.9 psig at 200 °F (102.7 KPa at 93.3 °C)
MDMT : -20 °F at 14.9 psig (-28.9 °C at 102.7 KPa)
Nominal capacity : 18,280 L (4,829 US Gal)
Designed temperature range : -29 °C to 93 °C (-20 °F to 200 °F)

Designed pressure rating : 172 KPa (24.9 psig)
Test pressure : 275 KPa (39.9 psig)
Shell material : SA36
Head material : SA285C

Min shell thickness : 5.1 mm (0.20”)
Min head thickness : 7.1 mm (0.28”)
Manufactured shell thickness : 6.3 mm (0.25”)
Manufactured head thickness 7.9 mm (0.31”)

Weld material : EM12K
Surface area : 14,624 L (3,863 US Gal)
Max lading density : 1.0 kg / L (2.2 lb / L)

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

------------------------------------------------------------------
Search words (for official use only) :
Vacuum Truck for Sale - 2003 built
Used Vacuum Truck - For Sale
2003 built Vacuum Truck for Sale
------------------------------------------------------------------

Worldrigs ID: WR658

Schramm T985HA Rotadrill Rig for Sale
1977 Built Schramm T985HA Rotadrill Drilling Rig

Model : T985HA Rotadrill Rig
Manufacturer : Schramm
Year : 1977
Condition : Used

1977 Schramm T985HA Rotadrill
Twin Diesel Deck Engine (8V-71)
Twin 400 CFM / 350 PSI Air Compressor (can combine)
Heavy Duty Mast
Autofeed
Auto Hydraulic Table Breakout Wrenches
Twin Hydraulic Main Pump
Twin Hydraulic Top head motors
Top head two speed rotation
Hydraulic adjustable Jib & Swing Jib
Water Injection Pump
Oil Injection Pump
Pull Down & Pull Up Rams
Mounted on a CCC (Crane Carrier Company) Truck 4x4
Diesel Engine
Complete Part & Service / Repair Manual

Location : USA

Price & terms : Please enquire using the email form below.       

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Schramm T985HA Rotadrill Drilling Rig - 1977 Built for Sale
Used Schramm T985HA Rotadrill Drilling Rig
Schramm Rotadrill Drilling Rig for Sale
Schramm Land Drilling Rig for Sale
Schramm T985HA Rotadrill Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR930

Caterpillar 992K High-Lift Loader for sale
Mining Dump Trucks for Sale
Used High Lift Loader for Sale
High Lift Truck Loader
Caterpillar 992K Truck Loader

Description

The Cat 992K High-Lift provides an added choice for quarriers, mines
and high-volume earthmoving contractors using large wheel loaders to
load haul trucks. Having a full 24 inches more dump clearance than its
standard-lift counterpart, the 992K High-Lift efficiently and productively
loads 100- and 150-ton capacity trucks such as the Cat777F and
785C, including 100-ton units with sideboards and fleets running mixed
sizes of trucks. In some applications, this added lift height allows using
the 992K rather than a larger loader.

The 992K High-Lift has rated payload capacity of 21 tons. Assuming 100
percent bucket-fill factors, maximum material densities for available buckets,
smallest to largest, are 3,000, 2,800 and 2,625 pounds per cubic yard.
Hinge-pin height at full lift is 24 feet 9 inches. Equipped with a 14 cubic yard
bucket, dump clearance under the teeth is 17 feet 2 inches; equipped with
15- and 16-cubic yard buckets, dump clearances are 16 feet 11 inches and
16 feet 9 inches respectively.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
----------------------------------------------------------------------------------------------------------
Search words :
Caterpillar 992K High-Lift Loader for sale
Truck Loader - Caterpillar 992K
Truck Loader for Mining
Caterpillar 992K High-Lift Loader truck for mining
High Lift Truck loaders for sale
Used High Lift Loader - Caterpillar 992K
----------------------------------------------------------------------------------------------------------

Worldrigs ID: WR690

Tugboat for Sale
1000hp Tugboat For Sale
1996 built Tugboat for Sale

General
Year Built : 1996
Class : GL

Length O. A : 21.50 M
Breadth : 7.30 M
Depth : 3.50 M
GRT / NRT : 139 / 42

Main Engine :
2 X 375KW Cummins – KTA 19M @1800 RPM

F.O. : 94.5 M3 (approx)
F.W. : 30 M3 (approx)

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
------------------------------------------------------------------------------------------
Search words(for official use only) -
Tugboat for sale in Singapore
1000HP - 1996 built Tugboat for sale
Used Tugboat for sale in Asia
Tugboat for sale
1000HP Tugboat for sale
1996 built Tugboat for sale
------------------------------------------------------------------------------------------

Worldrigs ID: WR2013

Pontoon Barge for Sale
1972 Built Pontoon Barge

Description :

Type : Pontoon
Dimensions : Loa : 45,26m / B:15,2m / D:3,95m
Class : BV
Build : 1972 built
Location : North Europe

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) -
Pontoon Barge - 1972 Built - for Sale
Pontoon Barge for Sale
45.26m length Pontoon Barge 
Pontoon Barge for Sale in North Europe
---------------------------------------------------------------------------------------------------------

Worldrigs ID: WR1857

Anchor Handling Tug for Sale
AHT 1965 Built for Sale

Description :

Type : AHTS
Dimensions : 59.76 x 11.3m x 4.3m
Class : Lloyds Register 100A1
Build : 1965 built
Accom / Pax : 16 person
Machinery : 2x De Industrie 6D8-OHD – Total 3600bhp
Speed : 8.0kts @ 5.0 tons/day,9.0kts @ 6.0 tons/day, 10.0kts @ 7.0 tons/day
Deck : Deck cargo : 400t deck area : 280m2
Capacities :
Fuel 345 m3(88,500 USG) Drill water 100m3(26,500 USG) 
Potable Water 350m3(93,120 USG) Bulk 2500 ft3 in 4 tanks

Location : Turkey

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------------------------
Search words (for official use only) -
1965 Built Anchor Handling Tug
16 person Accomodation Capacity Vessel for Sale
Anchor Handling Tug for Sale in Turkey
AHT - 59.76m - 1965 Built for Sale
---------------------------------------------------------------------------------------------------

Worldrigs ID: WR2513

Anchor Handling Tug For Sale
Anchor Handling Tug - 1999 Built - for Sale

Description :
Built : 1999
Class : I 3/3 E. B.V.
 
Main Dimensions :
Length Overall : 42.50 m
Beam Moulded : 11.60 m
Depth Moulded : 5.00 m
Draft (Max) : 4.40 m
Free Deck Space : 165 m2
 
Tonnage :
GRT : 636 tons
NRT : 191 tons
DWT : 500 tons
Deck Cargo : 250 tons
 
Machinery :
Main Engines : 2 x Wartsila 6L26
Break Horsepower :  5,350 Bhp
Generators : 2 x 230 Kw + 1 x 160 Kw
Bow Thruster : 620 hp CPP, 6 tons thrust
Propulsion : 2 x CPP Propellers in kort nozzles
Rudders : 2 Streamlined
 
Speed & Consumption :
Maximum Speed : 14 knots
Service Speed : 12 knots
Consumption : 8t/24H Free running 
                         14t/24H Towing
 
Tank Capacities :
Marine Gas Oil : 341 m3
Potable / Ballast Water : 185 m3
 
Safety Equipment :
Life Rafts : 2 x 25 men, 2 x 10 men
SART : 2 
EPRIB : 1 
Rescue Boat – Diesel Driven : 6 persons

Towing & A/H Equipment :
Bollard Pull  : 80 Tons  
Anchor Winch : Dubble Drum Waterfall Type 
                         120T @ 6m/min 
                         60T @20m/min
                         30T @40m/min 
Winch Brake Load : 180 Tons
Wire Dimensions : 1200m x 58mm
Stern Roller : SWL 250 tons, (L) 3.5m x (D) 2m
Shark Jaws : Retractable SWL 300 tons
Towing Pins : Retractable with horizontal
                      locking tops SWL: 95 Tons
Tugger Winch : 1 x 10 tons
 
Radio & Navigation Equipment :
GMDSS : Sailor 4000
Radar : 2x Racal Decca 181 E
Gyro Compass : Anschutz STD-20
Auto Pilot : Anschutz Pilot Star D
DGPS : Koden KGP 931D
Echo Sounder : Skipper ED 161
Navtex : JMC NT 900
EPRIB : MC Murdo E3
ECDIS : Maris 900 FPC MK10
 
Fifi System :
Fire Monitor : 2 x 20,000 LPM (FiFi 1) 
Pump Capacity : 2 x 1500m3/h at 14 Bar
Horizontal Throw : 120 m
Foam Capacity : 13.6m3
 
Accommodation :
Air-conditioning : Fully air-conditioned
Berths : 14x crew, 8x passenger Total 22
 
Miscellaneous :
1 x Water Cargo Pump 50m3/h @60mH, 
1 x Sewage Treatment System, 
2 x3.5m Dispersant spray booms/13.60 cbm tank
1 x F.O. Cargo Pump 50m3/h @ 60mH
Silencers equipped with spark arrestors
Hydraulic Crane – 6.5T @3M, 2T @10M
Fixed H2S System – 4 Channel Detectors

Location : UAE

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us anemail to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------
Search Words (for official use only) :
1999 Built Anchor Handling Tug for Sale
Anchor Handling Tug - 42.50m - for Sale
22 Passenger Accommodation Capacity Vessel for Sale
B.V Classed AHT for Sale

Worldrigs ID: WR822

Ingersoll-Rand T4W Drill Rig for Sale
1994 Built  Ingersoll-Rand T4W Drill Rig

Model : T4W Drill Rig
Manufacturer : Ingersoll-Rand
Year : 1994
Condition : Used

Description

1994 Ingersoll-Rand T4W Drill Rig
Cummins KTA19C Diesel Deck Engine
IR 1050 cfm / 350 psi Air Compressor
Worm Gear Power Head
4 & 7 Rod Carousels
14,570 hours
Water Injection Pump
Hammer Lubricator
50,000 lbs of Pullback

Included as a package:
2000' ft of (4.5" x 25') drill pipe, 6" & 8" & 10" drill collars,
used 6" & 8" Hammers & Bits, Handling Plates,
Breakout Wrenches, Petal Tongs

Mounted on a CCC (Crane Carrier Company) Truck
Diesel Engine
21,830 Miles

Location : USA

Price & terms : Please enquire using the email form below.   

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words(for official use only) :
Ingersoll-Rand Drilling Rig for Sale
Used Ingersoll-Rand T4W Drilling Rig for Sale
Drilling Rig for Sale in USA
1994 Built Ingersoll-Rand T4W Drilling Rig
Used Drilling Rig - Ingersoll-Rand - in USA
---------------------------------------------------------------------------------------------------------

Worldrigs ID: WR1784

Fast Crew Agency / Service Boat for Sale
Service Boat - 10m for Sale

Description :

Type : 10m Fast Crew Agency / Service Boat
Dimensions : Loa : 10.45 / B: 3.0m
Class : Turkish Maritime Authority
Build : 2008
Accom / Pax : 12 pax as per MCA
Machinery : M/E : 1 x Yanmar Diesel 370 bhp
Speed : 25 knots
Location : Turkey

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------
Search words (for official use only) -
Fast Crew Agency / Service Boat 2008 Built for Sale
2008 Built Service Boat for Sale
12 Passenger Accommodaton Service Boat
10m Fast Crew Agency for Sale
Offshore Service Boat for Sale
-------------------------------------------------------------------------------------------

Worldrigs ID: WR348

New Tug For Sale
Newbuilding 1658BHP 26M Towing Tug
1600BHP Towing Tug For Sale

Principal Particulars
Class : GL
Length overall : 26.00m
Length B.P. : 23.98m
Breadth moulded : 8.00m
Depth moulded : 3.65m
Draft moulded : 3.00m
Trial speed : approx 10 knots
Designed bollard pull : 22 tonnes (approx)

Machinery
Main Engine : Yanmar 6AYM-ETE, 2 x 829BHP / 1900 rpm
Gear box : Yanmar YXH 240 L, Ratio: 5.91:1
Propeller : 2 x solid fixed pitch propellers
Main generator : 2 x 28KVA Cummins / Yanmar

Tankage
Fuel oil : 153M³
Fresh water : 46M³
Ballast : 29M³

Deck Machinery
Anchor : 2 x stockless bower anchors (420kg)
Chain Cable : Nine (9) lengths of Grade U2 chains
Anchor Windlass : 17.5mm anchor windlass
Towing Hook : 1 x 25 tons

Navigation & Communication Equipment
Echo Sounder : 1
GPS : 1
Radar : 1
4” Spare Magnetic Compass : 1
SSB & VHF : 1
EPIRB : 1
Battery Clock : 1
Barometer : 1
Searchlight : 1
Floodlight : 3
Clear View Screen : 1
High Steering Wooden Chair : 1

Auxiliary Equipment
Bilge & Ballast pump : Power: 1 x 2.2HP / 1.65kw / 415v50Hz
Q (1/min): 50 – 170
H (m): 42 -22
GS & Fire pump : Power: 1 x 2.2HP / 1.65kw / 415v50Hz
Q (1/min): 50 – 170
H (m): 42 -22
Fresh water pressure set : Power: ½ HP
Suction head (m): 8
Max. Quantity (1/min): 48
Sea water pressure set : Power: ½ HP
Suction head (m): 8
Max. Quantity (1/min): 48

Fire Fighting System
2’ Firehouse + Hydrants : 3 sets
Fire Extinguisher : 9 nos
Fireman Axe : 1
Scoop & Sand Box : 1
Fire Bucket : 3
Anchor Ball : 3

Life Saving Equipment
Life Raft : 2 units (10 men)
Life Buoy : 8 pcs
Life Jackets : 14 pcs
Parachute Distress Rocket : 12 pcs
Fireman Outfit : 1 set

Accommodation
Total Complement : 10 Crews

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------------------
Search words ( For official use only) :
Towing Tug for sale
Towing Tug for sale in Singapore
Newbuilding Towing Tug for sale in Asia
1600bhp Towing Tug for Sale
Tug For USA
Tug For Columbia
1658 bhp towing Tug
Tug For South America
Tug For Mexico
New Towing Tug For Sale in Singapore
Tug For Trinidad
------------------------------------------------------------------------

Worldrigs ID: WR1246

Vacuum Truck for Sale
Used Vacuum Truck for Sale

Specifications
Year of manufacture : 2003
MAWP : 14.9 psig at 200 °F (102.7 KPa at 93.3 °C)
MDMT : -20 °F at 14.9 psig (-28.9 °C at 102.7 KPa)
Nominal capacity : 15,934 L (4,209 US Gal)
Designed temperature range : -29 °C to 93 °C (-20 °F to 200 °F)

Designed pressure rating : 175 KPa (25.4 psig)
Test pressure : 275 KPa (39.9 psig)
Shell material : SA36
Head material : SA285C

Min shell thickness : 3.3 mm (0.13”)
Min head thickness : 7.1 mm (0.28”)
Manufactured shell thickness : 7.9 mm (0.31”)
Manufactured head thickness 7.9 mm (0.31”)

Weld material : EM12K
Surface area : 35.6 sqm (383.2 sq.ft)
Max product load : 12,747 L (3,367 US Gal)
Max lading density : 1.0 kg / L (2.2 lb / L)
Max load rate : 2,189 L / Min (578.3 US Gal / Min)
Max unload rate : 2,189 L / Min (578.3 US Gal / Min)

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

------------------------------------------------------
Search words (for official use only) :
Vacuum Truck for Sale
2003 built Vacuum Truck - For Sale
Used Truck for Sale
------------------------------------------------------

Worldrigs ID: WR757

Schramm T450M Drilling Rig for Sale
Schramm T450M Drilling Rig - 2005 Built - For Sale

Model : T450M Drill Rig
Manufacturer : Schramm
Year : 2005
Condition : Used

Description :

2005 Schramm T450M Drill Rig
Note: Set up for core drilling
Mounted to a 2006 AWD International Truck
10-speed transmission
300 HP DT466 with 7400 miles
Sullair 300 cfm / 200 psi air compressor (locked up)
5 x 6 Gardner Denver mud pump
Moyno pump
Centrifugal pump
Winch
Sand line
UDR KL400
Sandvik hands-free table
Have table bushings and breakout fork for normal rod
Rod loader
Rig was used for core drilling but no core barrels included

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
2005 Built Schramm T450M Drilling Rig for Sale
Drilling Rig - Schramm T450M - For Sale
Used Schramm T450M Drilling Rig for Sale
Schramm Used Land Drilling Rig for Sale
Schramm T450M Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR1220

Schramm T450 Drilling Rig for Sale
Used Schramm Drilling Rig for Sale

Model : T450 Drill Rig
Manufacturer : Schramm
Year : 1988
Condition : Used

Description : 

1988 Schramm T450 Drill Rig
Diesel Deck Engine
Air Compressor
Carousel
Centrifugal Pump
Pipe Rack
3 hydraulic leveling jacks
Mounted on a Truck
Diesel Engine

Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

         

---------------------------------------------------------------------------------------------------------
Search words(for official use only) :
Schramm T450 Used Drilling Rig for Sale
1988 Built Rig Schramm T450 for Sale
Schramm T450 Drilling Rig for Sale in USA
Schramm T450 Drilling Rig 1988 Built for Sale
Schramm Land Drilling Rig for Sale
Drilling Rig - Schramm T450 for Sale
-----------------------------------------------------------------------------

Worldrigs ID: WR145

1000 Ton Floating Crane for Sale
Used Floating Crane
 
General Description
This Barge is S.W.L 1,000 ton steel crane barge for the "A"-type boom lifting
system and back tower to be provided at fore end and after end of the barge
respectively as shown on the "General Arrangement" plan.
It is the Builder's responsibility that the Barge is designed, built and outfitted
with machinery and equipment in compliance with all pertinent Rules and
Regulations.
The Builder shall furnish all items required for the completion of the Barge.
It is to be understood that anything not mentioned in the Specifications but
which are usual, or necessary in accordance with best current marine
practice, reasonable requirements of the Owner's supervisor and/or required
by the Classification Society or Regulatory Bodies listed herein, shall be
supplied and/or equipped by the Builder.
If any inconsistency is found among Contract, Specifications and accompanying
plans, the priority of interpretation shall be governed as following order.

General Arrangement
The Barge shall have a complete upper deck. The bow structure shall be made in
a stream-lined form.
The space under upper deck shall be divided 3 longitudinal watertight bulkheads
and 6 transverse watertight bulkheads as shown on the General Arrangement Plan.
From fore end No.1 W.B.T(P/C/S), No.1 Void(p/c/s), No.2 void(p/s),
machinery space(c), F.O.T(in side, p/s), No 3. Void(out side, p/s)
F.W.T(out side (p/s), No.4 void(p/s), No2.W.B.T(p/c/s), No.3 W.B.T (p/c/s).
As will on upper deck arrange at crane boom, boom bed, main winch, aux. winch,
luffing winch, anchor windlass, mooring winch, anchor winch, ladder winch.

Principal Particulars
S.W.L 900 Ton Floating Crane Barge
Navigation area: Coaster Area
Classification: + KRS OC - BARGE, PONTOON/CRANE + KRM OC

Rules and regulation and certificate
(1) Rule and Regulation of the Classification Society
(Hereinafter called as "Rules").
 - Rule for Classification of Steel Ship.
 - Rule for Classification of Steel Barge.
 - Rule for Classification of Towing Survey of Steel Barge.
(2) International Convention of Load lines, 1966 and Amendments.
(3) International Conference on Tonnage Measurement of Ships 1969.
(4) Maritime Regulation of Concerned Government.
(5) International Regulation for Prevention Collision at Sea 1972 and 1982
Amendment.
(6) Korea Maritime Regulation.

Principal Dimensions
- Length over all (L.O.A) abt. 78 m 000
- Length between perpendiculars (L.B.P) 78 m 000
- Breadth (Moulded) 30 m 000
- Depth (Moulded) 4 m 800
- Draft (D.L.W.L)) 3 m 500
- Scantling Draft (Moulded) 3 m 600
- Gross Tonnage abt. 3340 ton

Deck Height
- Upper Deck - No.1 Deck House 4 M 000
- No.1 Deck House - No.2 Deck House 2 M 500

Tank Capacity (100% Full)
- Fuel Oil Tank: Abt. 170.0 M3
- Fresh Water Tank: Abt. 410.0 M3
- Water Ballast Tank: Abt. 4060.0 M3

Complements
Complement: Nil

Anchor and Mooring
1) Anchor
Item : Windlass
Position : Upper Dk(Aft)
Type : Hyd.Type
Capacity : 18tx12m/min
Qty : 1

Windlass to be Gypsy wheel, Wire drum, Warping end each 1 set and Brake,
Clutch.

2) Anchor, Anchor Chain and Mooring Rope
- Bow Anchor: 4890 Kg X 1 Ea
- Anchor Chain (Grade 2): 62 Φ X 275 M X 1 ea
- Tow Line (S.W.R. 6X24): 30 Φ X 190 M X 1 ea
- Hawser (P.P. Rope): 40 Φ X 160 M X 4 ea
- Working Anchor: 6000 Kg X 4 each with chain & wire rope

3) Winches
Item : Main Winch
Capacity : 26Tx18Mx40Φx955Mx2Dr
Qty : 2
Location : Upper Dk (Aft, P·S)

Item : Sub. Winch
Capacity : 21Tx12Mx40Φx730Mx2Dr
Qty : 2
Location : “ ” ( “ )

Item : Luffing Winch
Capacity : 40Tx19Mx48Φx1011M
Qty : 2
Location : “ ” ( “ )

Item : Mooring Winch
Capacity : 12Tx15Mx36Φx500M
Qty : 2
Location : Upper Dk (Mid, P·S)

Item : Anchor Winch
Capacity : 18Tx12Mx50Φx500M
Qty : 2
Location : Upper Dk (Mid, P·S)

Item : Work Winch
Capacity : 5Tx20Mx26Φx250M
Qty : 2
Location : Upper Dk (Mid, P·S)

Item : Aux. Winch
Capacity : 7Tx20Mx28Φx250M
Qty : 2
Location : “ ” (Aft, For)

Item : General Winch
Capacity : 5Tx20Mx26Φx250M
Qty : 4
Location : “ ” (Aft, For)

4) Mooring Fittings
Item : Towing Bracket
Qty : 4
Size : N.N68
Material : S35C/Ss400
Remarks : Jis F-2029 Type

Item : Bollard
Qty : 10
Size : 400A
Material : Spps/Ss400
Remarks : Jis F-2001 Type

Item : 360° Revolving Fair Leader
Qty : 4
Size : 350Φ
Material : Fc20/Ss400
Remarks : Maker Supply

Item : 3-Roller Fair Leader
Qty : 2
Size : 300Φ
Material : Fc20/Ss400
Remarks : Jis F-2014 Type With Hori. Roller

Item : Deck End Roller
Qty : 1
Size : 300Φ
Material : Spps/Ss400
Remarks : Maker Supply

Item : Hor. Guide Roller
Qty : 16
Size : 1000L
Material : Spps/Ss400
Remarks : Jis F-2022 Type

Item : Pa1-R Stand Roller
Qty : 2
Size : 300Φ
Material : Fc20/Ss400
Remarks : Jis F-2024 Type

Item : Chain Cable Stopper
Qty : 1
Size : 62Φ
Material : Fc25
Remarks : Jis F2016-64 For Aft. Anchor Winch

Item : Panama Chock
Qty : 4
Size : 500L
Material : Sc42
Remarks : Jis F-2017 Ac Type

Item : Anchor Roller
Qty : 2
Size : 680Φ
Material : Fc20/Ss400
Remarks : Maker Supply

Name : Diesel Engine For Hyd. Power Unit
Type : 4-Cycle. 12-Vee Turbocharge D/Eng.
Qty : 3
Capacity : 831Hpx1800Rpm
Remarks : Catapillar (3412Dita)

Name : Hyd. Power Unit
Type : Gear Driven Type
Qty : 3
Capacity : Maker Standard

Name : Diesel Generator
Type : 4-Cycle. Single Act. Direct Injection
Qty : 2
Capacity : 270Hp×1800Rpm ×76Kw
Remarks : Doosan (Pnl)

Name : Air Compressor
Type : 1-Stage Air Cooling
Qty : 1
Capacity : 28M³/Hx9Kg/×3.7Kw W/Air Tk.(Abt.170)
Remarks : Auto Start /Stop

Name : Sewage Treatment
Type : Bio Aerob Type Automatic Control
Qty : 1
Capacity : 28P/Day Flow Rate : 2150ℓ/Day

Name : Oily Water Separator
Type : Filtering Type
Qty : 1
Capacity : 1.0M³/H×0.4Kw Below 15Ppm

Name : Ballast Pump
Type : Hori. Cent.
Qty : 2
Capacity : 350M³/H×20M×30Kw

Name : G.S & Bilge Pump
Type : Hori. Cent. S/Prim'G
Qty : 1
Capacity : 80M³/H×35M×22Kw

Name : G.S & Bilge Pump
Type : Hori. Cent. S/Prim'G
Qty : 1
Capacity : 80M³/H×35M×22Kw

Machinery Room Equipment
Name : F.O Trans. Pump
Type : Hori. Gear
Qty : 2
Capacity : 5M³/H×3Kg/㎠×2.2Kw
Remarks : Auto Start / Stop

Name : Sludge Pump
Type : Hori. Gear
Qty : 1
Capacity : 5M³/H×3Kg/㎠×2.2Kw
Remarks : Auto Start / Stop

Name : Fresh Water Hydrophore Unit
Type : Vert. Cent. With 100L Tank
Qty : 1
Capacity : 3M³/H×30M×2.2Kw
Remarks : Auto Start / Stop

Name : Sea Water Hydrophore Unit
Type : Vert. Cent. With 100L Tank
Qty : 1
Capacity : 3M³/H×30M×2.2Kw

Name : Bilge Pump For O/W Separator
Type : Piston Type
Qty : 1
Capacity : 1.0M³/H×20M×0.4Kw

Name : Hyd. Oil Cool. Pump
Type : Hori. Gear
Qty : 1
Capacity : Maker Standard

Name : Hyd. Oil Cooler
Type : Shell & Tube Type
Qty : 1
Capacity : Maker Standard

Name : F.O Serv. Tank
Type : Portable, Ss400
Qty : 1
Capacity : Abt. 3.0㎥

Name : Sludge Tank
Type : Portable, Ss400
Qty : 1
Capacity : Abt. 6.0㎥

Name : Drain Tank
Type : Portable, Ss400
Qty : 1
Capacity : Abt. 0.2㎥

Name : Hyd. Oil Tank
Type : Portable, Ss400
Qty : 1
Capacity : Maker Standard

Crane Equipment

1) Lifting Hooks
Main lifting hooks 450Ton x 2 Ea (Max. Lifting Height: 81.83 M At 65°)
Aux. lifting hooks 225Ton x 2 Ea (Max. Lifting Height: 88.69 M At 65°)

2) Main Boom
Two(2) pipe “A" type boom

 (1) Dimensions
- Boom Length: 95.00 M
- Outreach (65° Inc. ): 26.91 M
- Outreach (60° Inc. ): 34.00 M
- Standard Working Angle: 65°
- Topping Angle (Min.): 30°
- Topping Angle (Max.): 65°

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where
needed.

The details mentioned above are believed to be accurate but are not guaranteed.

 --------------------------------------------------
Search words (for official use only) :
Floating Crane for Sale
Crane for Sale - 1000 ton
1000T Floating Crane for sale
 ------------------------------------------------

Worldrigs ID: WR1448

Continental Emsco A550 Drilling Rig for Sale
Used SCR Electric Drill Rig for Sale
700 hp Continental Emsco Drilling Rig for Sale

Description

Drawworks :
Continental-Emsco A-550 Double Drum Drawworks, 700 Hp, Lebus Grooved For 1-1/8”
Line, Continental –Emsco Makeup & Breakout Catheads, Air Driller’s Console,
Crown-O-Matic

Drawworks Power :
General Electric 752 1,000 Hp. Traction Motor W/10 Hp Blower Motor Assembly

Brake :
Parkersburg 46” Hydromatic Brake S/N 46210

Mast :
Hodgson 129’6” H Cantilever Mast, 500,000 Lb. Static Hook Load W/Crown Block,
Racking Board, Tong Counter Weights, Ladder, Derrick Climber, Geronimo, Mast
Stand, 4” Standpipe & Manifold

Substructure :
Hodgson 14’w X 16’4”H X 37’2”L Box-On-Box Substructure W/Rotary Beams, V-Door
Ramp, Stairs, Safety Rails And Deadline Anchor

Pump (Primary) :
Continental-Emsco F-800 Triplex Mud Pump, 800 Hp. W/ (3) 6-3/4” X 9” Forged Steel Fluid
End, Quick Change Valve & Cylinder Head Caps, Continental-Emsco 5,000 Psi.
Pulsation Dampener, Oteco 3” Shear Relief Valve, Mcm 5” X 6” Centrifugal Charging
Pump P/B Weg 50 Hp Electric Motor, M&F Gauge Type F 6,000 Psi, Pressure Gauge, Rod
Cooling Pump, V-Belt Drive Assembly, Master Skidded W/ Traction Motor

Pump Power :
General Electric 752 1,000 Hp Traction Motor, W/10 Hp Blower Motor Assembly

Pump (Stand By) :
Continental-Emsco F-800 Triplex Mud Pump S/N 40, 800 Hp. W/ (3) 6-3/4” X 9” Forged Steel
Fluid End, Quick Change Valve & Cylinder Head Caps, 5,000 Psi. Pulsation Dampener,
Oteco 3” Shear Relief Valve, Mcm 5” X 6” Centrifugal Charging Pump S/N 15353 P/B Weg
50 Hp. Electric Motor, Rod Cooling Pump, V-Belt Drive Assembly, Master Skidded
W/Traction Motor

Pump Power :
General Electric 752 1,000 Hp Traction Motor, W/10 Hp Blower Motor Assembly

Rotating Equipment :
- Continental-Emsco 20-1/2” Rotary Table W/Split Master Bushings
- Yg-225 250 Ton Swivel
- 5-1/4” X 42’ L Hex Kelly
- Varco Kelly Drive Bushing Square Drive Upper Kelly Valve
- Lower Kelly Valve

Traveling Equipment :
- Continental-Emsco 250 Ton Block/Hook Combination
- 2-3/4” X 120”L Elevator Links

Well Control Equipment :
- Cameron Style Annular Blowout Preventer 11” X 5m
- Cameron Style Double Blowout Preventer 11” X 5m
- 11” Dia. X 80”H X 5m Drilling Spool
- Oco 4-Station Accumulator W/ (8) Bottles. Weatherford Triplex Pump
P/B Weg 15 Hp. Electric Motor, (2) Air Pumps, Gauges, Mounted On No. 2 Generator Skid
- Wgpc 5,000 Pal Choke Manifold W/5-Way Cross, (2) 3-1/16” X 5m Gate Valves,
(5) 2- 1/16” X 5m Gate Valves, Oteco Model 6 6,000 Psi Pressure Gauge,
Mounted 6’9”W X 9’6”L Covered Skid W/Dayton Electric Heater
- Kill Valves – (2) 2-1/16” X 5m Gate Valves
- Choke Valves – (1) 3-1/16” X 5m Gate Valve

Rig Houses :
- Shopbuilt 7’6”W X 24’l Doghouse W/6’l Covered Porch, (4) Lockers,
Bench Storage, Shelves, Heater, Lights, Knowledge Box, Skidded
- Shopbuilt 8’w X 24’l Change House W/ (11) Lockers, Bench, Electric
Heater, Shelves, Table, Lights, Skidded

Utility Houses/Generators :
- No.1 – Ge 752 Dc Generator P/B Caterpillar D-379 Diesel Engine W/ Air Start,
Radiator, Gauges, Mounted 10’w X 35’l Covered Skid W/ 13’7”L Parts House
- No. 2 – Ge 752 Dc Generator P/B Caterpillar D-379 Diesel Engine W/ Air Start,
Radiator, Gauges, Mounted 10’w X 35’l 3-Sided House, Skidded
- No. 3 – Ge 752 Dc Generator P/B Caterpillar D-379 Diesel Engine W/ Air Start,
Radiator, Gauges, Mounted 10’w X 35’l 3-Sided House, Skidded

Standby Generators :
- No.1 – Caterpillar Sr-4 400 Kw. Ac Generator P/B Caterpillar 3406 Diesel
Engine W/ Electric Start, Radiator, Gauges
- No. 2 – Caterpillar Sr-4 400 Kw. Ac Generator P/B Caterpillar 3406 Diesel
Engine W/ Electric Start, Radiator, Gauges
- General Electric Motor Control Console
- General Electric 75 Kva Transformer
- General Electric 50 Kva Transformer
- Above Mounted 10’w X 35’l Utility House, Skidded. Gen Doghouse

Mud System :
- Shopbuilt 10’w X 6’3”H X 32’l, 343 Bbl. Premix Tank W/ 10’3”L Pump House,
(1) Compartment, (2) 5 Hp Mud Agitators, Mud Hopper, Internal Plumbing, Flat Bottom,
Top Mounted Walkways, Skidded
- (2) Mcm 5” X 6” Centrifugal Mixing P/B Reliance 75 Hp Electric Motor
- Shopbuilt 8’w X 5’6” H X 29’8” L, 224 Bbl Suction Tank W/ (3) Compartments,
(1) Oilworks 5 Hp Mud Agitator, (1) Brandt 5 Hp Mud Agitator, Internal Plumbing,
Flat Bottom, Top Mounted Walkways, Safety Rails, Stairs, Lights, Skidded
- Shopbuilt 8’w X 20’l Mixing Skid
- Mission Magnum 5” X 6” Centrifugal Mixing Pump P/B 75 Hp Electric Motor
- Double Life 5” X 6” Centrifugal Mixing Pump P/B 75 Hp Electric Motor
- Shopbuilt 8’w X 5’6”H X 38’l, 287 Bbl. Shaker Tank W/ (3) Compartments,
(1) Brandt 10 Hp Mud Agitators, Internal Plumbing, Flat Bottom,
Top Mounted Walkways, Safety Rails, Lights, Skidded

Water/Fuel Tanks :
- Shopbuilt 12’w X 10’6”H X 24’l, 519 Bbl. Water Tank W/14’l Parts House,
Mounted Water/Fuel Tank Skid
- Mcm 2” X 3” Centrifugal Water Pump P/B Baldor 25 Hp Electric Motor
- Mcm 2” X 3” Centrifugal Water Pump P/B Baldor 25 Hp Electric Motor
- Shopbuilt 12’w X 10’6”H X 13’7”L, 12,260 Gallon Fuel Tank, Mounted Water/Fuel Tank Skid
- Shopbuilt 2’w X 3’10”H X 6’l, 3-Compartment Lubester, Mounted Water Tank Parts House

Instrumentation :
- Md Totco Type Fs 400,000 Lb Weight Indicator W/Pump Pressure, Tong Torque Gauges
- Type D 5,000 Psi Mud Gauge

Handling Tools :
- Aot Rotary Tongs
- Byron Jackson 4-1/2” Drill Pipe Elevators
- 4-1/2” Drill Pipe Slips
- 9-Segment Drill Collar Slips
- 10- Segment Safety Clamp
- Mud Bucket

Ancillary Equipment :
- Shopbuilt 6’w X 44”H X 44’l 2-Section Catwalk W/ Steel Deck
- 3 Sets Of (6) 42”H X 28”L Pipe Racks
- Shopbuilt 7’6”W X 2’2”H X 3’5”L Junk Box, Skidded
- Ingersoll-Rand K4u Air Hoist
- Ingersoll-Rand K5u Air Hoist
- 3-1/2” X 60’l Rotary Hose &Vibrator Hoses
- Mid-Continent Measuring Device W/ 10,000 Ft Of .092 Wireline
- Rat Hole & Mousehole
- Fluorescent Mercury-Vapor Rig Lights W/ Wiring

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Continental Emsco A550 Used Drilling Rig for Sale
700 hp SCR Electric Drill Rig for Sale
Continental Emsco A550 SCR Electric Drill Rig for Sale
10,000’ Capacity Drilling Rig for Sale in USA
SCR Electric Drill Rig for Sale in USA
700HP Land Drilling Rig for Sale
Continental Emsco A550 700 hp Drilling Rig for Sale
---------------------------------------------------------------------------------------------------------------

Worldrigs ID: WR2882

Worldrigs ID: WR2501

Anchor Handling Tug for Sale
AHT - 2004 Built - For Sale

Description :

Type : AHT
Dimensions : L: 25 / B: 9 / D: 2.4m
Class : Lloyds
Build : 2004
Accom / Pax : 12 Person
Machinery : 2600 bhp 34 TBP Bow Thruster
Speed : 11 knots
Capacities : Fuel: 126 m3 Fresh Water: 72 m3
Others : A-Frame

Location : North Europe

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us anemail to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------
Search Words (for official use only) :
2004 Built AHT for Sale
AHT - 25m - for Sale
Lloyds Classed AHT for Sale
12 person Accommodation Capacity AHT for Sale
Anchor Handling Tug for Sale in Europe
---------------------------------------------------------------------------------------------------

Worldrigs ID: WR939

Ship Engines for Sale
Used Naval Vessel Engines for sale
Ship Engines for Sale - 3589 hp (2640Kw) @ 1950 rpm.
Used MTU 16V 538 TB91 engines for sale

Main Data
Operating method : 4-cycle, single acting
Combustion method : Prechamber
Mode of supercharging : Exhaust gas turbocharging
Cooling method : Water-cooled
Arrangement of cylinders : 60° V-engine
Bore : 185mm
Stroke : 200mm
Cylinder displacement : 5.38 litres
Number of cylinders : 16
Total displacement : 86.00 litres
Compression ratio : 15.8

Sense of rotation viewing the
designed main power output end : Anti-clockwise (not reversible)

Firing order : A1-B6-A6-B2-A2-B5-A5-B8-A8-B3-A3-B7-A7-B4-A4-B1

Injection pressure : 130.5 bar
Combustion pressure final at firing speed : 24 to 28 bar

Initial starting torgue -
at 10 to 20°C engine temperature with allowance
for acceleration included : 4000Nm

Cranking torque : 1500Nm

Firing speed -
at min 40°C engine cooling water temperature : 80 to 100 rpm

Valve clearnace : 0
Valve readjustment : Automatically
Peak/Sprint rating : 2640 kw (3589 HP) at 1950 rpm
Overload/Intermittent : 2440 kw (3317 HP) at 1850 rpm
Maximum continuous rating : 2220 kw (3018 HP) at 1790 rpm

Reference conditions -
Intake air temperature : 32°C
Raw water temperature at charge air cooler inlet : 27°C

Idling speed : Approx 650 rpm
Main piston speed at 190C rpm : 12.7 m/s
Injection timing : 12° bef. t.d.c.

The peak sprint rating is the highest effective output of the engine which can
be delivered for one half hour within six operating hours without mechanical
and thermal overstress.

The overload intermittent rating is the highest effective output of the engine
which can be delivered above the continuous rating of 2 hours, continuous or
with interruptions, within 6 operating hours.

1950 rpm is the allowable maximum rpm for contractors sea trials and post refit
SATS with a clean hull, clean propellers and the ship at standard displacement.
This makes allowance for a 50 rpm drop to 1900 rpm for hull fouling etc.

1900 rpm is the maximum rpm at all other times including four monthly workups
to full power and annual full power trials.

The duration of operation at peak/sprint rating is not to exceed one half hour within
six operation hours.

The power tendency indicators will indicate that the engines are in the overload
condition, i.e, in the red zone, when the engines are operated at intermittent or sprint
ratings.  This overloading is acceptable provided that the duration of such overloading,
as stated above, is not exceeded.

Operating Parameters
1. The operation of these engines below 1000erpm is to be kept to a minimum.
2. When starting from a cold condition, the following parameters are to be met :
a. The fresh water cooling system is to be pre-heated to at least 40°C prior to engine start.
b. Engine speed is not to exceed 1200erpm until both the engine oil and fresh water
cooling systems have attained 60°C.

S/N. - Engine S/N. - Engine Hours
1 - 911215 - 11,192
2 - 911195  - 4,300
3 - 911216 - 4,750
4 - 911213 - 3,950
5 - 911259 - 9,895
6 - 911261 - 4,286
7 - 911200 - 6,200
8 - 911201 - 11,137
9 - 911214 - 7,541
10 - 911265 - 3,800
11 - 911202 - 4,093
12 - 911266 - 9,850
13 - 911109 - 8,500
14 - 911260 - 9,301
15 - 911220 - 6,500
16 - 911196 - Not identified
17 - 911218 - Not identified
18 - 911262 - Not identified

The engines are removed from the Naval Patrol Boats (Fremantle Class)
Additionally, there are also heat exchangers for the engine fresh water cooling and
lubricating oil coolers as well as control panels and other detached parts.

The engines are all MTU 16V 538 TB91 -  3589 hp (2640Kw) @ 1950 rpm.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------
 Search words(for official use only) :
Ship Engines for sale
Used MTU engines for sale
Used Navy Ship Engines for Sale
Patrol vessel engines for Sale - MTU 16V 538 TB91
Used MTU 16V 538 TB91 engines for sale
Used ship engines for sale
Used Navy Vessel engines for sale
 -------------------------------------------------------------------------

Worldrigs ID: WR2799

311FT Well Stimulation Vessel - For Sale
2012 Built Well Stimulation Vessel

Description :

General
Vessel Type : WSV - Well Stimulation Vessel
Vessel Class : OSV - Offshore Supply Vessel
Year Built : 2012
Classification : ABS, USCG, SOLAS, MARPOL

Capacities
Fuel Oil : 237,654 Gallons (899.6 m3)
Ballast/Cargo Fresh Water : 546,260 Gallons (2,068 m3)
Potable Water : 65,437 Gallons (247.7 m3)
Brine : 191,825 Gallons (726.1 m3)
Dry Bulk : 19,196 ft3 (543.4 m3) Including the Sand Silo
Liquid Mud (Dual Tank System) : 145,131 Gallons (549.4 m3)
Liquid Mud (Dual Tank System) : 20,192 Gallons (76.4 m3) (Alkali)
Liquid Mud (Dual Tank System) : 20,192 Gallons (76.4 m3) (Inhibitor)
Liquid Mud (Dual Tank System) : 25,306 Gallons (95.8 m3) (Mutual Solvent)
Special Products : 63,633 Gallons (240.9 m3)
Acid : 126,000 Gallons (477 m3)
In-internal FRAC Tanks : 46,265 Gallons (175.1 m3)

Special Features
Ship Motion : Bilge Keels
Ship Motion : Two (2) Passive Type Anti-Roll Tanks
Positioning : DPS-2 Dynamic Positioning System

Deck Crane :
One (1) x 3.0 LT SWL, 30ft Fixed Boom, (MCF-530 North Pacific Crane)

Deck Crane : DWM Marine 12MT Max Load, 15.23m MaxOutreach

Machinery
Main Propulsion : Four (4) Caterpillar 3512C (HD) 1,700 kw Generator
Propulsion : Two (2) WEG 2500 kw, 1194 RPM, 4000V Electric Motor
Bow Thrusters : Two (2) Brunvoll FU-80 1,050 kw Electric Driven Tunnel Thrusters
Stern Thrusters : Two (2) Brunvoll FU-80 800 kw Electric Tunnel Thrusters
Speed : 13.8 Knots (Estimated @ Loadline)
Emergency Generators : One (1) Caterpillar C18 (425 kw) Emergency Generator

Life Saving Equipment
Life RaftsSix (6) x 25 Man Life Rafts
Rescue Boat/CraftOne (1) Narwhal, Six (6) Person Rescue Boat

Other gear as required by authorities

Accommodations : 48 bunks + 1 berth hospital

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Well Stimulation Vessel for sale
312FT Well Stimulation Vessel for sale
ABS Class Well Stimulation Vessel
Well Stimulation Vessel - 311ft -for Sale
Offshore Vessel for Sale - 2012 Built - For Sale
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR2971

Derex 2630-22 Arthur Drilling Rig for Sale
Drilling Rig - Derex 2630-22 Arthur for Sale

Model : 2630-22 Arthur (Air/Rotary/Top/Head) Drill Rig
Manufacturer : Derex
Condition : Used

Description :

Derex 2630-22 Arthur (Air – Rotary – Top – Head) Drill Rig
Truck
Peterbilt 567
Paccar 13 Litre.
Allison 6 speed automatic
Air ride
Transfer Case
Namco (oilfield quality)
Safe Shift
Hydraulic System
Sundstrand, Bosch Rexroth plus gear pump
Top Head
Variable torque and RPM with 2” thru-hole
0-160 rpm @ 8,000-lbf torque
Derrick & Feed System
26ft top head stroke
30,000-70,000 lbs pullback
20,000-lbs pulldown
120 FPM
Air Compressor
Vanair/ Sullair 750 cfm / 350 psi @ 1,800 rpm and
1050 cfm / 350 psi @ 2,200 rpm
Main Winch
12,000 lbs
Hydraulic 135° jib
2,500 lbs
Remote on helpers side for winch
Control Panel
Straight hydraulic controls (no electrics to fail)
Marine grade electric switches (for lights)
Murphy engine monitor display
Twin platforms
Leveling Jacks
Four 36” stroke independently controlled
Night Lights
6 LED night lights
Toolboxes
30”x 18” x 18”
Overall Dimensions
Length: 38ft
Width: 8ft 6”
Derrick up height: 42ft
Derrick down height: 13ft 4”
Water Injection
9-GPM FMC injection pump
Gross Weight
44,000lbs - 46,000lbs
Pre-Order Drill from EWDAdditional Options
4 – 6 Month Leadtime from Date Ordered
Sand Line Winch
1,500ft sand line
Mud Pump
3x2x13 centrifugal 300 gpm/300 psi
Centerline piston 150 gpm/600 psi
Line Oiler
Many oilers available
Water InjectionOffsyder Rod Handling System
18 gpm FMC injection pump
Drill Pipe Packages
Wire Feeder and Box
Hydraulic or Gas Welders

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Used Derex 2630-22 Arthur Drilling Rig for Sale
Derex 2630-22 Arthur Used Drilling Rig for Sale
Derex Arthur Drilling Rig for Sale
Derex Used Land Drilling Rig for Sale
Derex 2630-22 Arthur Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR83

Reichdrill T650W Drilling Rig for Sale
Drilling Rig - Reichdrill T650W - For Sale

Model : T650W Drill Rig
Manufacturer : Reichdrill
Year : 1991
Condition : Used

Description :

1991 Reichdrill T-650-W Drill Rig
Camion has been repainted
Drill Rig sandblasted
Brakes and boosters has been change
Feed Cylinder redone
Deck engine good
Compressor turns
1300 working hours
Needs some work

Location : North America

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Reichdrill T650W Drilling Rig - 1991 Built for Sale
Reichdrill T650W Used Drilling Rig for Sale
1991 Built Reichdrill T650W Drilling Rig for Sale
Used Reichdrill Land Drilling Rig for Sale
Reichdrill Drilling Rig for Sale
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR2048

Tugboat for Sale
30.66m Tugboat for Sale in Singapore

Description :

Year Built : 2000
Gross Tonnage : 398 M.T.
Designed Bollard Pull : 45.0 Tons
Dimension (L X B X D m) : 30.66 x 10.65 x 5.0
 Main Engine : 2 x 1600 KW (approx 2175 BHP) Caterpillar CAT3606
Class : IRS
Sister Ship Available : N
Available : 4Q/15

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

--------------------------------------------------------------------------------------------------------
Search words (for official use only) -
Tugboat for Sale - 2000 Built
30.66m Tug for Sale in Asia
Used Tugboat for Sale 
2000 Built Tugboat for Sale 
Used Tug for Sale in Asia
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR528

Servicemaster 600R Lube Truck for Sale
New Lube Truck for Mining

Carrier : RDH 600 - Front seated or midship seated
Engine : Deutz D914L06, 6 Cylinder, Air Cooled, 110 hp
Transmission : Dana 20,000 - 3 Speed Fwd, Rev.
Axle : Dana 113

Lube Cassette :
- Fuel Tank  500 Gal.
- Hydraulic Tank 100 Gal.
- Engine Oil Tank 60 Gal.
- Grease 10 Gal. - 40 cfm Compressor
- 40 L Air Tank

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
---------------------------------------------------------------------------------------
Search words(for official use only) - 
Servicemaster 600R Lube Truck for Sale
New Servicemaster 600R Lube Truck for Sale
Mining Equipment Lube Truck
New Mining Servicemaster Lube Truck
Mining Lube Truck for Sale
--------------------------------------------------------------------------------------

Worldrigs ID: WR178

E-800 Triplex Piston Mud Pump

New E-800  EWECO Mud Pump

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------
Search words :
E-800 New EWECO Mud Pump for sale
New Mud Pump For Rigs
Drilling Rig Mud Pump for sale
New Drilling Rig Mud Pump
Mud Pump For Rigs
Triplex Piston Mud Pump
New Triplex Mud Pump For Sale
-----------------------------------------------------------------------------------------------------

Worldrigs ID: WR1011

Chicago Pneumatic T650 Drilling Rig for Sale
Chicago Pneumatic Used Drilling Rig for Sale

Model : T650 Drill Rig
Manufacturer : Chicago Pneumatic
Condition : As-Is

Description :

Chicago Pneumatic T650 Drill Rig
Mounted on a 6 x 6 Oshkosh Truck
Modified drill rig
Direct drive off of the truck engine
900 cfm / 350 psi air compressor

Location : USA

Price & terms : Please enquire using the email form below.       

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Drilling Rig - Chicago Pneumatic T650 - For Sale
Used Drilling Rig Chicago Pneumatic for Sale
Chicago Pneumatic Land Drilling Rig For Sale
Used Chicago Pneumatic Drilling Rig for Sale in USA
Land Drilling Rig For Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR2662

Davey M8A Table Drive Drilling Rig for Sale
Davey M8A Table Drive Used Drilling Rig - 1965 Built

Model : M8A Drill Rig - Table Drive
Manufacturer : Davey
Year : 1965
Condition : Used

Description :

1965 Davey M8A Drill Rig
Davey Piston Air Compressor
Serial Number : 381
300 CFM / 100 PSI Piston Air Compressor
Detroit 6-cylinder Diesel Engine Deck Engine
20 ft. kelly bar - Table Driven
Set up to run (15 ft. x 4 in.) OD drill pipes
Comes with 240 ft. of drill pipe in Rod box
DTH Hammer Oiler Working Condition
Mounted on a 1995 Ford Truck
Diesel Engine
12R22.5 tires
Mileage 99,202 miles
Dimensions: 34ft x 8ft 5" x 13ft
Note: Hasnt drilled since late 2017

Location : USA

Price & terms : Please enquire using the email form below.       

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Drilling Rig - Davey M8A Table Drive
1965 Built Davey M8A Table Drive Drilling Rig for Sale
Used Davey Drilling Rig for Sale
Used Land Drilling Rig for Sale
Davey M8A Table Drive Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR274

Gardner Denver PZ9 1000hp Mud Pump for sale
GD PZ9 Mud Pump

Built in 2007
Cat 3508
Has only 1808hours of use on it.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
------------------------------------------------------------------------------
Search words(for official use only) :
Gardner Denver Mud Pump For Sale
Gardner Denver 1000HP Mud Pump
Americal 1000hp Mud Pump
1000HP PZ9 Gardner Denver Mud Pump For Sale
Gardner Denver PZ9 Pump
1000hp Mud Mump for Sale
------------------------------------------------------------------------------

Worldrigs ID: WR294

Mid-Continent U-15 Drawworks
Used Mid-Continent U-15 Drawworks for sale

For further information, please contact rigs@worldoils.com
-----------------------------------------------------------------
Search words(for official use only) :
Used Mid-Continent U-15 Drawworks for sale
Mid-Continent  Drawworks for sale
Used Mid-Continent  U15 Drawworks for sale
Drawworks for sale
-----------------------------------------------------------------

Worldrigs ID: WR2058

Anchor Handling Tug Supply for Sale 
AHTS Vessel - 2010 Built - for Sale

Particulars
Vessel Type : Anchor Handling Tug Supply
Year Built : 2010
Classification : BV,Tug, supply vessel, fire fighting ship 1/anchor handling

Details
Length Overall : 50.00m
Breadth : 13.20m
GRT-NRT : 1092/327
Deadweight : 800 MT
Depth Moulded : 5.20m
Maximum draft : 4.50m
Clear deck Space : 250m²
Max Speed : 12.5kts
Economical speed : 11kts
Bollard Pull tonnes : 68.6T

Capacity
Fuel Oil : 590m³
Fresh Water : 215m³
Ballast Water : 150m³

Machinery
Main Engines : 2 x Caterpillar 3516B, each 2609
Gear Box : Suit CAT engine as above
Propeller :
BERG propulsion 2 controllable pitch propellers, KA-4 type, manganese bronze
Generators : 3 x 350kw Cummins 415V/3/50
Bow Thruster : 5 MT thrust, Kamewa thruster
Towing/Anchor : Double drum waterfall winch, each drum
Handling Winch : SWL 150T @ 6m/min, 1st layer.
Wire Ropes : Capacity: 2 x 56mm x 1250m long
In use :
1 x 58mm dia x 840m (towing wire)
1 x 56mm dia x 1250m (working wire)
1 x 56mm x 1000m (spare tow wire)

Shackles and Bridles : Assorted from SWL 50MT to 200MT
Tugger Winches : 2 x 10T @10m/min, brake holding 25 tons
Capstan : 1 x 5T @ 10m/min
Towing Pins : 200T SWL 2 Off
Shark Jaw : 200T, triplex shark jaw
Stern Roller : 4m x 1.5m
Electro-hydraulic telescopic deck crane : 10 ton @ 2m

Accommodation
Berths : 4x1, 3x2, 5x4
Total : 30

Fire Fighting
Class : 1
Monitors : 2
Capacity : 2400m³/hr capacity
Foam : 2000 ltrs foam tank
Oil Dispersant Oil dispersant boom P&S 

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) -
AHTS Vessel - 2010 Built - for Sale
50m Length AHTS Vessel for Sale
2010 Built Anchor Handling Tug Supply Vessel
AHTS Vessel for Sale
---------------------------------------------------------------------------------------------------------