Worldrigs ID: WR793

Gardner Denver 1500 Drilling Rig for Sale
Used Gardner Denver Drilling Rig for Sale

Model : 1500 drill rig
Manufacturer : Gardner Denver
Condition : Used

Description :

Gardner Denver 1500 drill rig
5x6 mud pump
kelly drive recentlly rebuilt
Mounted on a twin axle carrier
Diesel engine
Note: no air compressor on board

Location : USA

Price & terms : Please enquire using the email form below.       

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Gardner Denver 1500 Used Drilling Rig for Sale
Gardner Denver 1500 Drilling Rig for Sale
Land Drilling Rig - Gardner Denver 1500 - for Sale
Used Land Drilling Rig for Sale in USA
Gardner Denver Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR1095

Bollard Pull ASD Tugs for sale
25Ton Bollard Pull ASD Tugs
2012 built ASD Tugs for Sale

General :
Classification : Lloyd's Register of Shipping 100A1, Tug
Built : 2012
Speed : 11 knots

Measurement :
Length Overall : 28.7 m
Length WL : 24.2 m
Breadth Moulded : 9.8 m
Depth Moulded : 5.0 m
Draft (Max) : 4.25 m

Tonnage :
Deadweight : 297 T
GRT : 371 T
NRT : 111 T

Maneuvering & Propulsion System :
Main Engine : 2 x CAT 3508C, 1,100 BHP each
Main Propulsion Thruster : 2 x 1,100 BHP, coupled to Rudder Propellers,
360 Degrees Steerable
Total BHP : 2,100 BHP
Propeller : 2 x 820kW HRP 5111WM Z-drive Propellers in Nozzles
Bollard Pull (Preliminary) : 25.0 T @ 100% MCR

Electric Power Generation :
Main Generator : 2 x CAT C6.6 rated 100kW/ 415V/ 50Hz/ 3Ph

Cargo Deck :
Deck Area : Approx. 60 sqm
Deck Strength : 5.0 T/sqm
Deck Cargo Capacity : Approx. 300 T

Storage Capacity :
Fuel Oil : 208.1 cbm
Fresh Water : 41.9 cbm
Lubricant Oil : 4.3 cbm
Hydraulic Oil : 2.0 cbm

Type and grade of fuel used :
Fuel : MGO

Accomodation :
Berth / Cabin :
2 x 1 man
2 x 2 men
1 x 4 men
Total : 10 men

Deck Equipment :
Anchor Chain : 2 x 302.5 m x 22 mm (Ø)
Anchor (Bow) : 2 x 495 kg AC-14 HHP Stockless Bower Type
Capstan : 1 x Electro Hydraulic, SWL: 2 T @ 15m/min
Deck Crane : 1 x Knuckle Boom Crane, SWL: 1 T @ 6 m

Wheelhouse :
Vessel design incorporates maximum all round visibility. Control of main engine
and steering gear from forward control station.

Towing Equipment :
Anchor Windlass / Towing Winch :
80MT Brake @ 1st Layer
Single Drum Electro Hydraulic Driven with Double
Warping Heads & Double Gypsies

Line Pull :
3 T @ 40 m/min (1st Layer) and
10 T @ 20 m/min (1st Layer)

Chain Size / Drum Capacity :
22 mm Grade 3 / 200 m x 80 mm (Ø) PP Rope

Gypsy Duties Pull : 3 T @ 10 m/min
Towing Hook : 1 x Pneumatic Control, SWL: 30 T

Navigation and Communication Equipment :
GMDSS (Area 2) : Area 2
VHF DSC : 1 x Furuno FM8800S
MF/HF SSB : 1 x Furuno FS-1570
MF/HF DSC : 1 x MF/HF Radio Equipment

EPIRB : 1 x McMurdo SMARTFIND E5 (406 Mhz)
SART : 1 x McMurdo S4 GMDSS 9 GHz SART
Navtex Receiver : 1 x NT-1800 GMDSS

Portable GMDSS VHF :
2 x ICOM, IC-M72 Marine Handheld
2 x McMurdo R1 GMDSS VHF/ 2 Way Radio

Radar : 1 x Furuno FAR-2117 X-Band Radar (96NM)
Gyrocompass : 1 x Simrad RG50
Magnetic Compass : 1 x Standard Magnetic MR-150A Compass
Auto Pilot : 1 x Anschutz NP60
GPS : 1 x GP-150

Echo Sounder : 1 x ED-165
Speed Log : 1 x Furuno DS-80 Doppler
Anemometer : 1 x Young Wind
AIS : 1 x Furuno FA-150
LRIT : 1 x LRIT System

Safety Equipment :
Life Raft : 2 x 15 persons, SOLAS Approved
Life Buoy : 10 x Life Buoys, SOLAS Approved
Life Jackets : 14 x Life Jackets, SOLAS Approved
EEBD : 6 x EEBD, SOLAS Approved
Fireman’s Outfit : 1 x Fireman’s Outfit, SOLAS Approved

Pyrotechnics :
1 x Line Throwing Apparatus (4 Projectiles & 4 Lines)
12 x Parachute Distress Rockets
2 x Orange Smoke Signals

Emergency Fire Pump : 1 x 11cbm/hr @ 25m head

Miscellaneous :
Oily Water Separator 1 x 15 ppm, 0.5 cbm/hr @ 2 kg/sqcm
Sewage Treatment 1 x 10 persons sewage treatment plant

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
-----------------------------------------------------------------------------
Search words(for official use only) -
25Ton ASD Tugs for Sale
Tugs for Sale
2012 built Bollard Pull ASD Tugs
Over 28m ASD Tugs
Bollard Pull ASD Tugs for sale
2012 built Tugs for Sale
Bollard Pull ASD Tugs - 25 tons - for Sale
--------------------------------------------------------------------------------

Worldrigs ID: WR2582

Fast Supply Vessel - 1996 Built - For Sale
165FT Fast Supply Vessel for Sale
Used 1996 Built FSV for sale

General
Vessel Type : Fast Supply Vessel
Year Built : 1996
Classification : ABS

Particulars
Dimensions : 165 ft. x 32 ft. x 13 ft. (50.29 m X 9.75 m X3.96 m)
Draft (Maximum Operations) : 9 ft. (2.74 m)
Freeboard (Maximum Draft) : 6 ft. (1.83 m)
Clear Deck : 98 ft. x 30 ft. (29.87 m x 9.14 m)
Cargo Deck Area : 2,940 sq. ft. (273.01 m2)
Deck Cargo Capacity : 300 LT (304.81 MT)
Gross Tonnage : 98 (88.9 MT)
Net Tonnage : 67 (60.78 MT)
Deadweight Tonnage : 500 LT (508.02 MT)
ITC Gross Tons : 377

Capacities
Fuel Oil : 20,263 gals. (76.70 m3)
Ballast : 35,019 gals. (132.56 m3)
Potable Water : 1,066 gals. (4.04 m3)

Pumps with Discharge Rates
Fuel Oil : 190 GPM @ 140 ft.
Water : 190 GPM @ 140 ft.

Machinery
Main Engines : Three (3) 3516B Twin Speed, 6,600 BHP
Bow Thrusters : One (1) 150 HP Retractable Azimuthing
Speed : 22 knots
Propellers : Three (3) Fixed/Open
Generators : Two (2) CAT 3406; 75 kW each

Special Features
Ship Motion
Walk-in Cooler
Walk-in Freezer
Roll Stabilization Tanks

Electronics Package
Two (2) Radars, Two (2) VHF Radios,
Sea SBB (Single Sideband Radio),
Depth Sounder, GPS, Navtex Receiver,
Necoder, Autopilot, 406 EPIRB, MT V-Sat

Accommodations
Accommodations : 7
Passengers : 65

Price & terms : Please enquire using the email form below

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
-----------------------------------------------------------------------------------------
Search words (for official use only) :
Used Fast Supply Vessel for sale
65 Pax Fast Supply Vessel for sale
Fast Supply Vessel - 1996 Built - For Sale
165FT Fast Supply Vessel for Sale
Used 1996 Built FSV for sale
ABS Class Fast Supply Vessel for Sale
165FT FSV for Sale
------------------------------------------------------------------------------------------

Worldrigs ID: WR2089

Reichdrill Legend 4 Drilling Rig for Sale
2009 Built Water Well Drilling Rig

Description:

Compressor: Sullair 1000/350.
Eng: Cat C-15.
Mounted on a 2009 Kenworth.
Eng: cummins ISX

Tools/Options: Reichdrill Legend 4: Deck Engine has the California Emission Control
System - Certified Clean Idle, 40,000# Pullback, 27,000# Pulldown, 18" Table Opening,
9-Rod Carousel & 18-Rod Pipe Rack, 1,000 

psi Bean Piston Water Pump, Rapid Retract & Regen System. . Rig is Capable of
Carrying 540' of Drill Rod on Board, 6" & 8" Hammer Holders, Remote Station for Jib
Boom. Rig is set up to run 4" X 20' Drill Rod. (4) Leveling Jacks and (2) Fuel Tanks with
a Total Capacity of 185 Gallons, (4) Shock Mounted Night Lights. 2,306 Rig Hours. 485
HP Truck Engine with approx. 19,000 Miles, 4-Way Lock Ups, Engine Block Heater,
Eaton Fuller 8 LL Transmission, Engine Brake, 3rd Steering Axle, A/C. 20,000# Front
Axle with Bridgestone 425 65R22.5 Tires, 20,000# Lift Axle with Kumho 385 65R22.5
Tires, 46,000# Rears with Bridgestone 11R22.5 Tires. 56 Gallon Fuel Tank. Includes:
540' of 4" X 20' X 2-7/8" Drill Rod, Table Bushings, Petol Wrench, Bit Basket, J-Wrench,
Lift Sling, Lifting Bail, Gas Powered Welder/Generator.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Reichdrill Legend 4 Water Well Drilling Rig
2009 Built Reichdrill Legend 4 Drilling Rig
Water Well Drilling Rig for Sale in USA
Reichdrill Legend 4 Drilling Rig for Sale in USA
---------------------------------------------------------------------------------------------------------------

Worldrigs ID: WR2663

Landing Craft 39 Meters Passenger Ferry for Sale
Landing Craft 39 Meters Passenger Ferry - 2018 Built
General
Dimensions : 39.50 x 10.00 x 03.00
Machinery : 2 x 400 BHP CATERPILLAR
Type of vessel : Steel Landing Craft Tank
Double Bottom, Single Hull
Build : 2018

Classification : BKI

Particulars
Length Over All (LOA)  : 39,50 meters
Breadth : 10.00 meters
Depth : 03.00 meters
Gross Tonnage : +/-400 GT
Fresh water capacity : > 50.000 Liters
Fuel Oil capacity : > 120.000 Liters

Main Engine : 2 x 400 BHP CATERPILLAR 3406C DITA-HE @ 1,800 rpm
Gear Box : 2 x HCT ADVANCE + Companian Flange
General Set : 2 x 33 KVA Yanmar Marine Genset YTG40TLV-OM
Speed : +/- 8 Knots

Safety Equipment
Landing buoy : 4 pcs Type xt 5555 (720x440)
Light landing craft : 2 pcs + Batteries
Life boat : 1 unit
Life Craft : 6 units @ 25 persons
Life Jacket : 81 pcs
Fire extinguisher : 4 tubes protect @ 6 kg
First aid kit : 1 pc
Smoke signal : 1 pc
Parachute signal : 3 pcs
Red hand flare : 3 pcs
Bell : 1 pc
Horn : 1 pc
Siren : 1 pc
Fire Hose : 1 set size 2”x 30 meter
Nozzle : 1 pc size 2”
Flag : 1 pc Indonesian flag
1 set signal flag

Navigation Equipment
Compass : 1 unit compass
Radar : 1 unit Furuno 1715 MK II
Binoculars : 1 pc type Bosma
Clear view screen : 1 pc 24 volt, 10ft
Search light : 1 pc CTG – 3, 1000 Watt
Clinometers : 1 pc
Satellite : 1 unit Furuno GP 32
Echo sounder : CVS-118 MK II

Communication Equipment
Radio : 1 unit Radio VHF
1 unit Radio SSB

Accommodation
Air condition : 9 units
Television : 2 units
Bed set : 12 pcs
Refrigerator & freezer : 1 unit freezer
Clock : 1 pc
Washing machine : 1 unit
Cook : 1 unit gas furnace Rinnai & 2 tubes LPG small
Toilet : 6 rooms

Ship Body / Plate
* Keel : 12 mm
* Hull : 10 mm
* Bulkhead : 8 mm
* Frame : 8 mm
* Deck : 8 mm

Price & terms  :  Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
------------------------------------------------------------------------------------
Search words (for official use only)  :
2018 Built Landing Craft Passenger Ferry for Sale
Landing Craft Passenger Ferry for Sale
Ferry for Sale
Landing Craft Passenger Ferry - 2018 Built - For Sale
39m Landing Craft Passenger Ferry for Sale
----------------------------------------------------------------------------------

Worldrigs ID: WR2778


Drawworks :
Foremost Hydraullic Drawworks, 95,000 LB Capacity, 400 ft
Drum Capacity

Drawworks Power : Detroit Series 60 Floor Engine

Hydraullic Power Unit :
W/(5) Main Hydraullic Pumps, Hydraullic Reservoir, Thermal
Exchanger, Plumbing, Filters

Mast :
Foremost 85 ft Mast, 140,000 LB Maximum Hook Load w/(4) Lines,
1" Drill Line, (2) 4 Stage Mast Raising Cylinders, Chains, Stand
Pipe, Hydraullic Piping, Utility Winch, Access Ladder, Lighting,
Fall Arrest

Substructure :
Foremost Trailer Mounted Raised Substructure; Sliding Trolley BOP
Handler w/(2) Hydraullic Cylinders, Manual Cellar Controls, Standpipe
Valve, Steam Manifold, Explosion Proof Lighting, Mounted on 2005
Peerless T/A 16 Wheel Trailer, Tires 11 R22.5, Steel Buds, Spring
Suspension, w/ Rear Outriggers, Front Levelling Jacks, Hydraullic &
Electrical Lines"

Rotary Table :
16" Rotary Table, w/1,600 LB Torque, 140,000 LB Maximum Load

Top Drive :
Fluid Design Solutions Model FDS240T 70 Ton Hydraullic Top Drive
w/ Integrated Swivel, Integral Travelling Block & Backup Leg

Injector :
Steward Stevenson Model M1100SK Injector, 110,00 LB
Lifting Capacity, 60,000 LB Snub Capacity

Hydraullic System & Components :
Raising Cylinders, Winches, BOP Handler, Doghouse Raising System,
Hoses, Filters,Valves

(1) Set Web Wilson Type AAX Manual 27/8"-95/8" Rotary Tongs
(1) Drill Pipe Elevator

Set Handling Tools :
Drill Pipe, Drill Collar Slips, Safety Clamp, Drill Pipe Elevators
Townsend Type 85 SPH Annular Preventer, 9"x 3,500 psi
(2) Townsend Model T88 Ram Preventer, 9"x 3,000 psi
Control Tech Working Spool, 9"x 3,000 psi, w/2" Outlets
Control Tech Crossover Spool, 7"x 3,000psi

Mud Pump :
Mastco Pump Shack, Model JBI JF800 Triplex Mud Pump, Detroit Series 60
14.7 Liter 700 Hp Diesel Engine, Tool Shop

Mud System :
358 BBL Mud Tank, (4) Compartments-17 BBL Trip Tank, 88 BBL Suction Tank,
125 BBL Settling Tank, 125 BBL Shaker Tank, Mix Pump,MixingGuns, Manifold

Swaco Mongoose - PT Elliptical - Motion Shale Shakers
(4) Mud Guns, (9) Flow Gates & Skimmers
Poorboy 28" In-Tank Degasser w/150 ft of 8" Vent Line
Chemical Mix Barrel w/5 Hp Electric Motor

(2) Mission Model 40202529 6x5x11 Pumps, w/ 50 Hp Electric Motor, 4" Manifold,
w/(7)4" Butterfly Valves, Hopper, Storage Compartment, Exhaust Fan, Mud Weight
Station, Pason Equipment

Drill Pipe :
(196)Joints 3 1/2" Range 3 Grade E Drill Pipe, w/ 3 1/2" IF Connections
(23) Joints 4" Range 3 Grade E Drill Pipe, w/ 3 1/2" IF Connections
(10) Joints 4 3/4" Drill Collars, w/ 3 1/2" IF Connections
(10) Joints 6 1/4" Drill Collars, w/4 1/2" XH Connections
(20) Joints 3 1/2" Hevi-Weight Drill Pipe, w/ 4 1/2" XH Connections

Combination Building :
12 ft x 54 ft Mounted on 4 Member Skid, Electrical Switchgear, Transformer,
Accumulator Plumbing, (15) Lockers, (2) Benchesw/ 9,000 Liter Fuel Tank,
(4) Product Tanks

Generator 1 :
Stamford Model 6063-MK35 350 KW Generator,w/ Detroit Series 60 475 Hp Diesel
Engine, w/ Electric Start, Lockout Box

Generator 2 :
Stamford Model IEC34-1 142 KW Generator,w/ Jhon Deere 190 Hp Diesel Engine,
w/ Electric Start, Lockout Box

MCC Panel, Transformer, Starters

Accumulator :
Control Tech Model Class 3 Accumulator, 80 Gallon Accumulator,5 Station Control,
3,000 psi w/ 178 Gallon Reservoir, PLC Remote, Cat Model Triplex Pump

Air Compressor :
National Compressed Air Model NCA-16-34GSD Air Compressor, w/ Sullair 2

Stage Air Compressor, 200 Hp Elecric Motor, 2005 Avis Welding & Fab 600

Instrumentation : psi Receiver,Selectronix Model ST-8 Instrumentaion

Diesel Day Tank, Liner Rack, Utility Bench, Tooling, Storage Cabinets
Explosion Proof Lighting
Weight Indicator, Rotary Torque Gauge, Pump Pressure Gauges, Tong Line
Gauges

Safety Equipment :
(3) Scott Air packs w/ (2) Spare Bottles, Fire Extinguishers, Welding Shields,
Safety Glasses, First Aid Kits, Stretcher, Eye Wash Stations,Safety Signs,
Lanyards

General Rig Tooling, Consumables, Rig Supplies, Spare Parts

Dog house :
9ft x 14ft, Drillers Control Console, Instrumentation, Storage Cabinets/Bench,
Stabbing Valve, Ruffneck Heater, A/C, Shelving

Tool House :
314 BBL Water Tank, Access Stairs, Safety Rails, Lubster, Cat Model 310 Triplex
Wash Pump, Utility Bench, Fastener Bins, Ruffneck Heater, Storage Compartments,
Tooling

Crew House 2005 Shelter Rig Managers Wellsite :
11.5ft x 45ft, Crew Washroom, Storage Area, Desk, Couches, Fridge, Stove,
Washer, Dryer, Washroom, Sleep Area Hydraulic Catwalk w/ Operator
Enclosure, Integral Hydraulic Power Unit, (4)  Swing Out Arms, (4) Levelling
Jacks, Hydraulic Pump w/ 50 Hp Electric Motor, (3) Hydraulic Pipe Tubs
w/ Controls, Manifold

2048-F
Choke & kill Line Valves, 2"x 3,000 psi w/ Hi-kalibre HCR, Manual Gate Valves,
Check Valves
Choke Manifold, 3" Gut Line x 5,000psi,w/ (2)2" Wing Lines, (8)2" Gate Valves,
(2)3" Gate Valves, Cortec 2" Chokes x 5,000 psi
Flare Tank skid mtd w/7ft x 8ft x 7ft Tank, w/(2)2",(1)6" Knockouts, 3" Flare
Line, 6" Degasser Line, Safety Rails, Stairs
Boiler : 2005 Williams & Davis 777 Volcano 100 Hp Boiler
(4)2m x 5m Rig Mats

Worldrigs ID: WR2052

AHTS Vessel for Sale
2004 Built Anchor Handling Tug Supply Vessel

Particulars
Vessel Type : Anchor Handling Tug Supply
Year Built : 2004
Classification : 1+Hull+Mach Supply Vessel, Fire Fighting Ship/Water Spraying

Details
Length Overall : 57.50m
Breadth : 13.80m
GRT-NRT : 1,204/361
Deadweight : 1,344t
Depth Moulded : 5.50m
Maximum draft : 4.80m
Clear deck Space : 380m² ( 600 tons total)
Deck loading : 600 T
Max Speed : 10.0kts
Economical speed : 8.0kts
Bollard Pull tonnes : 60t
Sewage Plant : 1 x WCB - 50
Rudders : 2 x Type L, Steering Cylinder
Joystick : Kawasaki
Flow Meter : Maker Oval Corporation Model LB602.152-B114-030

Capacity
Fuel Oil : 370m³
Potable Water : 200m³
Drill Water : 360m³
Oil Based Mud : 250m³
Dispersant : 20m³
Fuel Oil : 370m³
Potable Water : 200m³
Drill Water : 360m³
Oil Based Mud : 250m³
Dispersant : 20m³
Dry Bulk : 46.72m³ in four tanks
Foam : 20m³

Pumping Rates
Fuel Oil : 1 x 150m³/hr @ 75m head
Potable Water : 1 x 100m³/hr @ 75m head
Drill Water : 1 x 75m³/hr @ 40m head
Oil Based Mud : 1 x 70m³/hr @ 85m head
Dry Bulk : 1 x 40m³/hr @ 56m head

Machinery
Main Engines : 2 x Caterpillar 3516B DITA 2,375 BHP
Generators : 3 x CAT 3408C 315kW
Emergency Generators : 1 x 65 kW 415V/3ph/50Hz Perkins
Bow Thruster : 2 x Kawasaki KT 43-B1CPP 315kW
Propulsion : 2 x CPP Nicle Luminium Bronze

Accommodation
Berths : 2x1, 4x2, 8x4
Total : 42

Fire Fighting
Class : 1
Monitors : 2 x 1,200m³/hr
Pumps : 2 x 1,541m³/hr

Deck Equipment
Towing Winch :
Type : Electro-hydraulic  waterfall
Pull : 10T
Brake Holding : 200mt
Wire Capacity : 56mm x 1,000m

Anchor Handling Winch :
Type : 1 x Rolls Royce Electro-hydraulic waterfall
Pull : 10T
Brake Holding : 200mt
Wire Capacity : 56mm x 1,000m

Tugger Winch :
Number & Capacity : 2 x 10t Electro-Hydraulic
Wire Capacity : 22mm x 150m

Other Deck Equipment :
Storage Drum : Electro-hydraulic 56mm x 100m
Towing Pins : 1 x 80t Karmoy
Shark Jaws : 1 x 80t Karmfork
Stern Roller : 1 x 200t 4m x 1.6m
Deck Voltage & Sockets : 2 x 415V, 2 x 220V

Lifesaving
Liferafts : 6 x 25 man
Lifejackets : 58
FRC/Rescue Boat/Davit : 1 x DNV-MED-B-5810
Lifebuoys : 8
Immersion Suits : 3 

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) -
Anchor Handling Tug Supply Vessel for Sale
2004 AHTS Vessel for Sale
57m length Anchor Handling Tug Supply Vessel
AHTS Vessel - 57m - for Sale
AHTS Vessel 2004 Built for Sale
---------------------------------------------------------------------------------------------------------

Worldrigs ID: WR1458

F200-DEC (Two Available) Drilling Rigs for Sale
Mechanical Land Drilling Rigs for Sale
1780hp Land Drilling Rigs for Sale in USA

Description

Drawworks :   
Upetrom type TF25, Rated input power 1780HP, Drilling line
guide Upetrom, Upetrom Make-up cathead & Break-out cathead,
FH 46 Brake, 175 bbl Brakes cooling system capacity, water
cooled, DAAS Automatic drilling control,  Upetrom Crown-O-matic
device, powered by (1) Faur motor and (1) MB820 motor 890 HP each.

Mast :   
MA 200 Upetrom mast, 137’, 441,000# SHL, 10 lines, racking capacity of 10,499’ of 5”

Crown Block : Upetrom 240 ton with 6 sheaves grooved for OD 1-1/4” line

Substructure : Upetrom 26’7” x 32’3”, 715,000# setback, 16’4” drill floor height,  , 
Clear height between rotary beams and ground level , 3.8
 
Travelling Block : Upetrom 5-32-MC 200, 200 Ton block, 5 sheaves grooved for OD
1-1/4” line

Hook Block : Upetrom 200 Ton
 
Air Winches : (2) Upetrom TP1200, 2400# rated

Drilling Line :  Mechel Campia Turzil, 1-1/4" x 1900'

Deadline Anchor : Martin Decker 131T, 75,000# static capacity with OD 1-1/4” drill

Rotary Table : Upetrom MRL 275, 27 ½”, 500 Ton, powered by FAUR MB 820 motor (890 HP)

Master Bushing : Upetrom, two sided, 27 ½” 

Kelly Bushing : Sterom hexagonal/square

Swivel : Upetrom CH200, 200 Ton capacity, 5000psi 
 
Kelly Spinner : Upetrom DIBA

Mud Pump No. 1 :  Upetrom 2PN700, 700 HP, with AP-210 pulsation dampeners
powered by Electroputure Craiova MCF 550 KW motor, 737 HP
 
Mud Pump No. 2 :  Upetrom 2PN700, 700 HP, with AP-210 pulsation dampeners
powered by Electroputure Craiova MCF 550 KW motor, 737 HP

Mud Pump Suction Lines :  (2) 10” suction lines with (2) Upetrom line

Mud Discharge Lines (Each pump have separate line) :  (2) 4” flexible line section
vibrating hose, 5000psi 

Stand Pipe Manifold : RON 4 x 5000 connection ends, Cameron valves, 4”Dia, 5000 psi 

Stand Pipe : (1) 60’ stand pipe, 4”Dia, 5000 psi 

Rotary Hose / Circulating Hose : (2) Phoenix Oradea, 60’, 5000 psi
  
Engine Generator Sets : (2) Caterpillar 3512, 1725HP

AC Generators : Caterpillar CAT 1750, 1750 KVA, 380 V, 50 Hz

DC Generators/Emergency Generator(S) : (1) Caterpillar GEP 150, 150 KVA, 380V, 50Hz 
 
Air Compressor(S) : (2) Timpuri NOI model
 
Mud Tanks General : (7) tank system, 2100 bbl total capacity,  total usable volume of 1890 bbls

Mud tank No. 1 – 300 bbl : Sand/Trip tank, Neptun SA/2NB16-VO5 electrical agitator
powered by 10HP electric motor, 403x108x102 33’6” x 9’ x 8’6”

Mud tank No. 2 – 300 bbl : Cleaning tank, (3) Neptune SA/2NB16-VO5 agitators
powered by 10HP electric motor, 26’3” x 9’ x 8’6”

Mud tank No. 3 – 300 bbl : Mud tank, (2) Neptun SA/2NB16-VO5 electrical agitators
powered by 10 HP electric motor, 26’3” x 9’ x 8’6”

Mud tank No. 4 – 300 bbl : Mud Tank, (2) Neptun SA/2NB16-VO5 electrical agitators
powered by 10 HP electric motor, 26’3” x 9’ x 8’6

Mud tank No. 5 – 300 bbl : Mud Tank, (2) Neptun SA/2NB16-VO5 electrical agitators
powered by 10 HP electric motor, 26’3” x 9’ x 8’6

Mud tank No. 6 – 300 bbl : Reserve Tank, 26’3” x 9’ x 8’6

Mud tank No. 7 – 300 bbl : Reserve Tank, 26’3” x 9’ x 8’6

Hoppers And Agitators : (2) mud hoppers, (9) Neptun Campina mud agitators p/b 10HP electric

Shale Shaker : (2) Swaco ALS shakers  incl. ditch magnet

Mud Cleaner : SWACO (12) 4”cone D-silter, (2) 12” cone D-sander, Aversa Bucuresti centrifugal pump
 
Degasser : Upetrom vacuum, Aversa Bucuresti centrifugal pump p/b 75 HP motor, mud-gas separator

Trip tank :  300 bbl

Annular Preventer : Upetrom 13 3/8” x 5000, 9” x 5000, 5000 psi

Ram Type Preventer : Upetrom 13 58/8”, 9”, 5000 psi, single or double

Accumulator :  (1) 1000 gallon, 2000 psi with Upetrom P6U remote control panel

Choke Manifold : 3'' X 5000

Ancillary Equipment : Drill pipe elevators, pipeslips, pipe casing protectors, collar elevators,
collar slips, safety clamps, elevator links, bit breakers, bit gauges, casing slips for rotary table,
casing elevators, casing tongs casing circulating heads, thread protector, fishing tools 

Instrumentation :  Weight Indicator, mud pump pressure gauges, rotary speed tachometer, 
tong torqueindicator, mud pump stroke indicator & totalizers, mud pit volume indicators, 
mud flow volume indicator, drill parameter recorder, drilling drift, mud testing equipment,

Miscellaneous : gas maske, air breathing apparatus spare bottles, first aid equipment, sour gas
monitoring system, portable combustible gas detector, fire fighting equipment
 
Camp Site : Senior sleeper with attached bath, junior sleeper, (2) recreation rooms, Kitchens and
Mess rooms, camp spares, laundry container, dry store container, showers, toilets, water tank,
generator and

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Mechanical Land Drilling Rigs for Sale
F200-DEC (Two Available) Drilling Rigs 
1780 hp Mechanical Drilling Rig in USA
Land Drilling Rigs for Sale in USA
F200-DEC 1780 hp Mechanical Drilling Rigs
Two Available Drilling Rigs - 1780 hp
F200-DEC Mechanical Drilling Rigs for Sale
---------------------------------------------------------------------------------------------------------------

Worldrigs ID: WR594

UMD 125 Land Drilling Rig - For Sale in Europe
New Semi Mobile Drilling Rig For Sale - UMD 125

Main Technical Specifications
Engine type : C 15 ACERT
Nominal engine power hp (kW) : 475 (354)
Transmission : Allison 4700 OFS
Nominal hoisting capacity metric ton (lbs) : 125 (275000)
Workover depht (m) drill pipe (2 7/8”) : 5100
Drilling depht (m) (4 1/2“) : 1700
Rope diameter (mm) : 26
Mast height (m) : 32
Drilling floor height (m) : 5
Travelling system : 5x4
Working pressure (mpa) : 0, 65-0, 8

Technical Specifications
Drawworks
Main Drum -
Input power (hp) : 500
Barrel size : D18”  W38”
Brake rim size : D44” W12”
Wire line size : 1 ” (26 mm)
Drum speed : 7F/1R
Lubrication : Automatic or manual
Drum clutch : Air flex type
Brake cooling : Water circulation
Brake system : Band / disc / auxiliary (Parmac SSR-28 hydro-brake)
Chain drives : All chains are fully encloded for oil bath lubrication ensuring
longer life and cleaner operation

Sand Line Drum -
Barrel size : D13”  W37“
Brake rim size : D44” W9½”
Spooling capacity : 16114’
Sand line wire size : 9/16” (14 mm) - 5/8” (16 mm)

Rig Power & Transmission
Diesel engine(s) : Caterpillar C-15 ACERT, 540Hp, 2.100rpm
Transmission(s) : Allison OFS 4700 series with torque converter
Right angle gear box : Min 500 HP gear box in oil bath gear case
Compound box : Twin engine drive through transmission includes disconnect clutches
at compound shaft for engines

Mast  & Crown Block
Mast -
Mast complete set : Design and conform to APİ 4F specification
Mast height : 32m  ( 105ft  )
Max. static hook load capacity : 1.225kN  ( 275.000lbs )
Racking capacity : 1.700m ( 4 ½’’ DP19.2m double )
Mast type : Hydraulic telescopic
Height of the monkey board : 17.2m ( from floor )
Accessories : Two (2) X hydraulic catheads , Two (2) X tong weight boxes ,
standpipe , exproof  lightning....etc

Crown Block -
Crown block complete set - Design and conform to APİ 4F  specification
Max. hook load - 1.225kN (275.000lbs)
Number of sheaves - (3)  Main + (1) fast line  +  (1) deadline +  (1) sandline  +
(2) sheaves for service winch

Sheaves OD :
Fast Lines Ø32" ( Ø813mm )
Dead Line Ø28" ( Ø711mm )
Sand Line Ø28" ( Ø711mm )

Dia. of sheave’s grove :
Fast & Dead Lines Ø1" ( Ø26mm )
Sand & Winch Lines  Ø 5/8" ( Ø16mm )

Substructure
Substructure complete set : Design and conform to APİ 4F specification
Height of substructure substructure : 5m
Area of substructure : 40m2
Max. static rotary load : 1.400kN
Set back capacity : 700kN
BOP lifting tools : 3tons capacity electric or mechanic winches
Accessories : Mouse, rat hole, dog house

Rotary Table
Diameter of Opening : 20½"
Center of Table to Centerline of Sprocket Teeth : 44"
Maximum Static Load, ton : 350
Max Speed, rpm : 300
Gear Ratio : 3.79
Dimensions (LxWxH), in : 78×56×24
Approximate Weight, lbs : 12,020

Traveling Block  & Hook
Traveling block : 1.225kN Max. statik load, 4 sheaves, Ø32’’ sheaves dia. Ø1’’
(Ø26mm ) groove dia.
Hook : 1.225kN Max. statik load, 5tons spring stroke.
Elevator link(s) : 1.225kN rated load capacity.

Swivel
Static hook load, ton : 125
Working pressure, psi : 5,000
Maximum speed, rpm : 300
Coupling thread to stem : 4-1/2" Reg LH
Coupling thread to kelly : 6-5/8" Reg LH
Stem İ.D. : 2- 1/2"

Trailer  & Other Systems
Trailer :
Three axles semi mobile trailer, 16 wheels, fabricated high tensile steel vehicle
frame reinforced at points of greatest stress. Highway equipment and cab
included. Installed fuel tank. Tool box. Auxilary drill line drum, all axles dressed
brake, folding walkways on both sides of trailer.

Hydraulic jacks : Four hydraulic operated leveling jacks
Hydraulic service winch : 5 metric tons drum pull capacity
Deadline anchor : Deadline anchor attached directly to trailer frame
Air system : Compressor (engine drive), air tank, relief valves, air dryer, gauges, all clutches

Hydraulic system :
Hydraulic pump, system operate hydraulic cylinders on mast, hydraulic jacks,
hydraulic pipe tong, and hyraulic winch. Control valves, hydraulic oil tank, filters,
pipes, hydraulic and air valve connections, fittings.

Electrical lighting system : All the electrical equipments on the mast, and substructure
are ex-proof type

Instrumentation : Driller control panel, weight indicator, gauges, air valves, cables, hoses,
fittings, transducers, paint

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.




-----------------------------------------------------------------------------
Search words(for official use only) :
UMD 125 Drilling Rig For Sale in Europe
New UMD 125 Semi Mobile Drilling Rig For Sale
New Semi Mobile Drilling Rigs
Land Drilling Rigs For Sale
New Land Drilling Rig
 --------------------------------------------------------------------------

Worldrigs ID: WR1780

Crew Boat for Sale
14m Crew Vessel for Sale

Description :

Type : 14m Crew boat
Dimensions : 14.9m x 5m x 0.6m
Class : MCA
Build : 2006
Accom / Pax : 12 passenger + 2crew
Machinery : Cummins / 6CTA 430 hp x 2 // ttl : 860bhp
Speed : 20 knots
Deck : Deck space : 20m2
Location : Gulf of Mexico

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------
Search words (for official use only) -
Crew Boat - 14m for Sale
2006 Built Crew Vessel for Sale
12 Passenger Crew Boat - 14m for Sale
Crew Boat for Sale in Gulf of Mexico
14m Crew Vessel for Sale
-------------------------------------------------------------------------

Worldrigs ID: WR2113

Annular 18-3/4" 10K Type D for Sale

Description
Annular 18-3/4" 10K Type D -
Assembled 11-2013

Price & terms : Please enquire using the email form below.

 If you cannot find the vessel, crane, rig or equipment that you need,
 please send us an email to mail@worldoils.com stating your
 requirements and we shall find it for you.

 We can arrange delivery of equipment and towage of rigs and vessels where needed.

 The details mentioned above are believed to be accurate but are not guaranteed.

 ------------------------------------------------------
 Search words(for official use only) :
Annular 18-3/4" 10K Type D for Sale
Unused Annular 18-3/4" 10K Type D
 ------------------------------------------------------

Worldrigs ID: WR2084

280ft Flat Top Deck Cargo Barge for Sale
Over 85M Flat Top Deck Cargo Barge for Sale
Used 2005 built Flat Top Deck Cargo Barge for Sale

General
Year Built : 2005
Class / classification : Bureau Veritas
GRT / NRT : 3,320 t / 996 t

Specifications
Length Overall : 280 ft (85.34 m)
Breadth : 90 ft (27.43 m)
Depth Loaded 1: 8 ft (5.50 m)
Draft Loaded : 14.5 ft (4.39 m)
Dead Weight : 7,800 t (approx.)
Deck Loading : 15 t / m2
Tranverse Bulkhead : Eight (8)
Longitudinal Bulkhead : Two (2)

Deck Equipment
Anchor Winch : 1 x hand operated emergency anchor winch
Anchor : 1 x 2,000 kg stockless bower anchor
Smit Brackets : 4 x smit towing brackets - P&S, fwd and aft
Stanchions : 26 stanchions on each side
Navigation Lights : 1 set solar type, P&S at fwd and aft
Mooring Bollards : 4 sets double mooring bollards each side (deck)

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

------------------------------------------------------------------------------------------
Search words (for official use only) :
280FT Flat Top Deck Cargo Barge
Over 85M Flat Top Deck Cargo Barge for Sale
280ft Flat Top Deck Cargo Barge for Sale
Used 2005 built Flat Top Deck Cargo Barge for Sale
2005 built Flat Top Deck Cargo Barge for Sale
Used Flat Top Deck Cargo Barge
85M Flat Top Deck Cargo Barge - For Sale
------------------------------------------------------------------------------------------

Worldrigs ID: WR931

Terex O&K RH40E Shovel for Mining
2003 built Terex O&K RH40E Shovel for Sale
107 ton Shovel for Sale

Specifications :

2003 Terex O&K RH40E Shovel, 107 Ton, bucket
capacity : 7 m 3 C18, Acert, has approx 57,500
hours, in good condition and work ready.

Type : Front
Quantity : 3

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
----------------------------------------------------------------------------------------------------------
Search words :
Terex O&K RH40E Shovel for Sale
2003 built Terex Shovel for Sale
Shovel for Sale - 107 ton - for Mining
Shovel for Mining - 2003 built - for sale
107 ton Terex O&K RH40E Shovel for sale
----------------------------------------------------------------------------------------------------------

Worldrigs ID: WR406

Jackup Drilling Rig -  Friede & Goldman L780 For Sale
Offshore Oil & Gas Drilling Rig
Oil &  Gas Jackup Drilling Rig For Sale
Friede & Goldman L780 Jackup Rig For Sale
Offshore Jack up Drilling Rig For Sale

Specifications

Rig Type : Jackup
Rig Design : Friede & Goldman L780
Year Built : 1981
Upgrade : 1994
Class ; ABS
Registry : Marshall Islands
 
Water Depth - Ft : 300
Drilling Depth - Ft : 20,000
Quarters ; 86 + hospital w/examination table
Dimensions : 180' x 175' x 25'
Helideck : 62' diameter for Sikorsky S-61
Variable Deckload - Operating : 3,800 kips to 4,275 kips
depending on operating area

Variable Deckload - Transit : 4,275 kips
Number of Legs : 3
Leg Length : 401' 8"
Usable Leg Below Hull : 362' 4
Spud Can Diameter : 39' 8"
Cantilever Reach : 40'
Transverse Movement : 10' port or starboard of centerline
Max Combined Structure Load : 1,000 kips

Bulk Mud & Cement : 9,160 cu ft
Liquid Mud : 1,800 bbls
Fuel Oil : 2,049 bbls
Drill Water : 4,450 bbls
Potable Water : 1,180 bbls
Sack Storage : 3,000 sacks

Drawworks : Mid-Continent U-1220 EB w/1-3/8 drill line
Derrick : Dreco 30' x 30' x 160', 1,000 kips static hook load
Top Drive : Varco TDS-3 w/PH60 pipe handler
Pipe Handling System : Varco AR3200 Iron Roughneck
Rotary : Oilwell A-375, 37-1/2"
Top of Rotary Table to Bottom of Barge : 51 Ft.

Ram BOP :
Cameron Type U (single & double) 13-5/8" 10K and
T-3 double 21 1/4" - 2K Shaffer 13 5/8" 5K and
Shafer 21 1/4" - 2K

Annular BOP : Shaffer 13-5/8" 5K
Diverter : Hydril MSP 20"
Main Engines : (4) Caterpillar D-399
Mud Pumps : (2) Gardner-Denver PZ-11
Solids Control : (3) Brandt LCM-2D/CM2, Cascade system
Cranes : (2) Seatrax Model 6020 with 110 ft Booms

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels
where needed.

The details mentioned above are believed to be accurate but are not
guaranteed.

---------------------------------------------------------------------
Search words(for official use only) :
Jackup Drilling Rig For Sale
Jackup rigs for sale
Offshore Jackup Rig Builders
Friede & Goldman L-780 Jackup Rig For Sale
Offshore Drilling Jackup Rigs For Sale
Oil & Gas Jackup Drilling Rig For Sale
Jackup Rig sellers
Used Jackup Rigs sellers
Offshore Jackup Rig
Used Offshore Jackup Rig
Old Jackup Rig For Sale
------------------------------------------------------------------------

Worldrigs ID: WR1310

Franks 658 Drilling Rig for sale
2009 Rebuilt Drill Rig

Description :

1972 Franks 658 Drilling Rig

This unit has been completely redone and tooled out 
ready to work. It has a set of tubing tongs and rod tongs 
that have been completely redone and testing. Weight indicator, 
4 hydraulic leveling jacks, working floor with hand rails, 
100 ton miscissick block, 2 7/8 and 2 3/8 tubing elevators, 
cavins air slips, rod hook, 2 rod elevators, 9000' 9/16 swap line never 
been spooled, small junk basket. Drawworks has new brakes, 
brake bands and brake flanges, along with bearings seals and 
clutches with new chains. Detroit 60 series with Allison 
750 will less than 50 hours on rebuild from Stewart and Stevenson

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words(for official use only) :
Franks 658 Drilling Rig for sale
1972 Drilling Rig for Sale
2009 Rebuilt Drilling Rig for Sale in USA
Franks Drilling Rig for Sale in USA
-----------------------------------------------------------------------------------------------------------------

Worldrigs ID: WR2888

Offshore Supply Vessel - 2000 Built - For Sale
Used OSV - 240ft - for Sale

Description :

General
Vessel Type : Offshore Supply Vessel
Year Built : 2000
Classifications : ABS, USCG, SOLAS, MARPOL

Dimensions
Dimensions : 240 ft. X 56 ft. X 21 ft. (73.15 m X 17.07 m X6.40 m)
Draft (Lightship) : 6 ft. 6 in. (1.98 m)
Draft (Loadline) : 18 ft. (5.49 m)
Clear Deck : 165 ft. x 46 ft. (50.29 m x 14.02 m)
Cargo Deck Area : 7,590 sq. ft. (705.13 sq. m)
Deck Cargo Capacity : 1,750 LT (1,778.08 MT)
Deadweight Tonnage : 3,250 LT (3,302.15 MT)

Capacities
Fuel Oil : 208,919 gals. (790.84 cu. m)
Ballast : 372,509 gals. (1,410.1 cu. m)
Potable Water : 24,031 gals. (90.97 cu. m)
Dry Bulk : 8,106 cu. ft. @ 80 psi (229.54 cu. m @ 5.5bars)
Liquid Mud : 6,063 barrels (963.94 cu. m)
Methanol : 1,000 barrels (158.99 cu. m)

Machinery
Main Engines : Two (2) 3516 CAT Diesels, 3,200 BHP
Bow Thrusters : One (1) Ulstein TCNS Swing Up
Stern Thrusters : Two (2) Ulstein 1350H Retractable Azimuthing
Speed : 14.2 knots
Generators : Two (2) x 500 kW
Generators : One (1) x 170 kW

Special Features
Tuggers : Two (2) x 4 Tons
Ship Motion : Two (2) Passive Type Anti-Roll Tanks
Ship Motion : Bilge Keels
Positioning : DP 1
Firefighting : Two (2) 8,000 GPM Pumps and Monitors

Life Saving Equipment
Life Rafts : Four (4) x 20-Man Inflatable Life Rafts
Rescue Platform
Other gear as required by authorities

Electronics
Electronics Package :
Sailor R-501 2182 KHZ Watchkeeper Receiver
Young Wind Tracker
NAVTEX NCR-300A Receiver
Seacall 7000 MF/HF DC Watch Receiver
JUER-75C
NDZ-127 C Inmarsat Data Terminal
Seator 3000 GMDSS
Two (2) Furuno FR-1510 Mark-2 Radars
Furuno FCV-667 Depth Sounder
Two (2) Sea F156 VHF/FM Radios
Raytheon NAV/398 GPS/Loran
Two (2) Seacall F100 VHF DCS Controllers
NECODE DSC 1000
Kongsberg Simrad STS-01 Autopilot
Marine Technologies Bridge Mate Dynamic Positioning System

Accommodations : 29

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------
Search words (for official use only)  :
73.15M Offshore Supply Vessel for Sale
27 Accommodations Offshore Supply Vessel for Sale
Used 73.15M OSV for Sale
ABS Class Offshore Supply Vessel for Sale
OSV - 14.2 Knots Speed - For Sale
2000 Built OSV for Sale
240FT Offshore Supply Vessel for Sale
---------------------------------------------------------------------------------

Worldrigs ID: WR1129

Offshore Lattice Boom Crane for sale
Offshore Lattice Boom Crane - 70 ton
New Offshore Crane for Sale

Brand new 70T lattice boom offshore crane with ABS class
certificate and API 2C monogram

General Specification
Slewing Angle : 360º(Continus)
Slewing Speed(Full Load) : 0~0.85rpm
Luffing Time(Full Load) : 180s Up/down
Luffing Angle : +15° ~ +82°
Parking Angle : -5° ~ +15°
Operator Cabin :Left Side

Main Winch Data
Lifting Capacity(SWL) : 100T@21m,40T@45m,See Loading Chart;
No. Of Fall : 4
Working Radius : 10.0m(Min) / 45m(Max)
Main Lifting Speed(0-125T) : 18m/min
Hook Travel : 95m

Aux Winch Data
Lifting Capacity(SWL) : 20T@48m, Man Riding :1.5T
No. Of Fall : 1
Working Radius : 11.0m(Min) / 48m(Max)
Main Lifting Speed(Full Loading) : 0~67m/min
Lifting Height : 100m

Note :
All operational speeds stated above are based on average volumetric efficiencies
provided by our suppliers of hydraulic components. A speed variation tolerance of
+10% to -5% is within the accepted range and should be taken into consideration.

Hydraulic Arrangement

Hydraulic Systems
The hydraulic transmission will be designed for optimum performance within the
constraint of available horsepower. High pressure hydraulic system uses power
more efficiently and applies power as needed.

All motions controls offer infinitely variable speed and full reversing characteristics.
Two full flow filters will be installed. The filter(s) will be adequately sized for full flow
operation without causing pump cavitation. Replaceable wire mesh filter cartridge
of minimum absolute value of 40 micron will be used. The pumps will have overflow
suction independent of the reservoir, and the arrangement of piping can avoid air
pockets.

Hoisting Circuit
Each winch is driven by a common open loop hydraulic system including piston
pump piston motor and epicycles gearbox. Each winch is fitted with oil immersed,
multi-disc and dynamically rated “fail safe” brake.

The fixed displacement hoist motors offer a constant operating speed.

Slewing Circuit
The slew circuit is driven by a common open loop hydraulic system.  Dynamic
braking of slewing is by means of hydrostatic compensation. Similarly positive
locking brakes are fitted in the circuit and used as static brake;

Luffing Circuit
Luff circuit is driven by a common open loop hydraulic system. Each winch is fitted
with oil immersed, multi-disc,dynamically rated “fail safe” brake. an additional luff
ratchet cylinder is included, providing a positive means of locking the luff drum
whenever the prime mover is shutdown.

Hydraulic Piping
1. Pipes: No pipe threads will be used for the high-pressure lines larger than 3/8".
Hydraulic components that have pipe threaded ports lines will have a minimum
working pressure 300PS. .
2. Pipe fittings: Zinc plated mild steel material. External fittings are painted and
protected by Denso tape or equivalent against corrosion.
3. Hoses: High rubber quality for best resistance against sunlight and salinity,
Wire breaded for applicable specified hydraulic pressure ratings
4. Hose couplings: Zinc plated mild steel material, External couplings are painted
and protected by Denso tape or equivalent against corrosion

Hydraulic Oil Tank
1. Level gauge with isolating valve (to top cover)
2. Inspection and cleaning cover
3. Filter with fine mesh stainless steel strainer and ventilation
4. A relief valve will be installed in the discharge line of pump.

Cooling Circuit
The air-oil heat exchanger will be provided and sized to ensure continuous operation
of the crane under the ambient temperatures given on the data sheets.

Electric Arrangement
Standards, Codes and Protection
Refer to Codes Of Practice and Standards. The electrical systems onboard the crane
complies with these standards for good offshore electrical design and engineering
practices.

Standard Lighting
The following are provided as standard lighting packages for the crane. More lights can
be added according to client's request.

Description : Aviation Warning Light
Qty : 1
Size : 85 W
Location : Boom Tip
Power Supply : UPS

Description : Aviation Warning Light
Qty : 1
Size : 85 W
Location : Mast
Power Supply : UPS

Description : Florescent Access Light
Qty : 2
Size : 2 x 36 W
Location : Machinery House
Power Supply : Main

Description : High Pressure Sodium Floodlight
Qty : *
Size : 400 W
Location : Boom
Power Supply : Main

Power Supply
Main Power Supply : 440 VAC, 03 Phase,  60Hz

Electric motor(s) (for applicable zone)
Power Consumption : 400Kw+250Kw
Speed : 1790r/m
Starting method : Soft starter

Others
Junction box(es) is provided at the pedestal interface for connection to client supply.
By default only SS316 junction boxes are installed onboard.

Generally cable wires will be multi-stranded copper and protected against mechanical
 damage. All power and control cables are with XLPE/EVA/GSWB/EVA construction.
Occasionally able of XLPE/EVA/CWB/EVA is used when big power cable is part of the
design.  All electrical lines are tagged accordingly for ease of maintenance.

All outdoor equipments and instruments are Ingress Protected IP56. Indoor equipments
and instruments are rated with IP44 as minimum.

Ordinarily, the power supply for crane is transmitted from pedestal to slewing platform
through the centre slip ring to ensure the crane can work at any angle.

Control and Instruments
Cabin :
The following instruments are arranged on the console to permit the operator to maintain
an uninterrupted view of the loads and instrumentation. The two(2) motion  controls
joysticks designed according to API-2C, are ergonomically correct and easy to handle.
All instruments are clearly labeled.

1. Motion Control Joysticks:
2. “Dead-Man” Type
- Position sensitive with motion and speed infinitely variable and proportional to movement
from spring-return central position.
- Luff and slew (single left) joystick
- Main and auxiliary hoist (single right) joystick
3. Prime Mover Start/Stop Switch
4. Prime Mover Emergency Shutdown Switch
5. Slew Brake Control Lever for option
6. Safe Load Indicator System
7. Visual and Audible Annunciator Panel (See SAFETY FEATURES)
8. Boom Hoist Down Override Switch
9. Pressure Gauges: Boast Control / Hoist / Slew / Luff
10. Electrical Switches:
11. Lighting
12. Windshield Wipers & Washer
13. Warning Horn
14. Air Conditioning
15. Main and Auxiliary Hoist selector
16. Tachometer

Hoist Mechanisma

Hoist Winch Data
Feature : Hoist Drum
Description - Material, Details : Cast Steel, Remark : 100% NDT
Description : Groove, Remark : Reeving not over 3 layers
Description : Support End, Details : Anti-friction Bearing

Feature : Braking
Description : Type
Details : 1x Band Brake, Remark : Asbestos free lining, for man riding winch only
Details : 1x Multi-disc Brake, Remark : Positive Locking
Details : 1x Load valve, Remark : As dynamic Brake

Description : Safety Factor
Details : Minimum 2.0

Feature : Rope Anchors
Description : Type, Details : Bolted rope clamp,
Remarks : For ease of rope replacement

Description : Safety Factor, Details : Minimum 1.1,
Remarks : Ensures rope breaking strength when over loaded

Feature : Ratios
Description : Drum to Rope
Details : Min.19 : 1
Remark : Drum pitch diameter over rope diameter

Feature : Safety
Description : Drum flange beyond top layer,
Details : 2.5 x rope diameter,
Remark : To avoid rope jumping out of drum unintentionally

Description : Fleet angle
Details : < 2.5⁰
Remark : Ensures smooth and even rope spooling at all times

Description : Dead turns on the drum
Details : Min.5
Remark : Amount of rope that is not in used even at the maximum
hoist reach of the crane

Luffing System
Feature : Hoist Drum
Description - Material, Details : Cast Steel, Remark : 100% NDT
Description : Groove, Remark : Reeving not over 3 layers
Description : Support End, Details : Anti-friction Bearing

Feature : Braking
Description : Type
Details : 1x Load Brake, Remark : As dynamic Brake
Details : 1x Multi-disc Brake, Remark : Positive Locking
Details : Ratchet and pawl, Remark : Luffing locking device

Description : Safety Factor
Details : Minimum 2.0

Feature : Rope Anchors
Description : Type, Details : Bolted rope clamp,
Remarks : For ease of rope replacement

Description : Safety Factor, Details : Minimum 1.1,
Remarks : Ensures rope breaking strength when over loaded

Feature : Ratios
Description : Drum to Rope
Details : Min.19 : 1
Remark : Drum pitch diameter over rope diameter

Feature : Safety
Description : Drum flange beyond top layer,
Details : 2.5 x rope diameter,
Remark : To avoid rope jumping out of drum unintentionally

Description : Fleet angle
Details : < 2.5⁰
Remark : Ensures smooth and even rope spooling at all times

Description : Dead turns on the drum
Details : Min.5
Remark : Amount of rope that is not in used even at the maximum
hoist reach of the crane

Boom Luffing-in limit buffer
 Anti-backward limit is used to prevent the boom over luffing in order to protect boom.

Mast
The Luffing sheaves are placed on the mast (A-frame) which is fitted with a top platform
for maintenance and inspection of the mast head sheaves, luff hoist rope and anchor
connections. Access to the Top Platform is by ladder from the machinery deck. The
mast is pin connected to the machinery deck.

Slew Mechanisms
Slew Bearing
Brand - ROTHE-ERDE XUZHOU or equivalent
Rolling Element - Triple Cylindrical Roller
Lubrication
- Grease holes in diagonal orientation in outer ring
- Lubrication  lines  are  fitted  on  the  machinery  deck for refilling grease into the bearing

Boom
Length - 48M
Type - Reinforced Lattice Structure
Pins - High Tensile
Connectors - Cast Steel
Welding Test - NDT 100% MPI, 100% UT/RT
Boom Top Platform - Both Sides

Safety  
Hardwood blocks - To prevent rubbing of ropes on boom bracing damaging paint and
cause unnecessary rusting.
Walkway paths - 760mm wide grating along and inside of boom for maintenance
access
Handrails  - Along boom section

Boom Bottom 
Type - Reinforced Lattice Structure
Material - High Tensile Low Alloy Low Carbon Seamless Chords with stell bracings

Boom Intermediate Section
Type - Reinforced Lattice Structure
Material - High tensile low alloy low carbon seamless chords

Boom Head
Type - Reinforced Lattice Structure
Material
- High tensile low alloy low carbon seamless chords
- With Mild Steel Bracings
- High Strength Steel Head Plate

Reeving System
Sheaves
Materials - Steel
Processing Technique - Cast
Ratio - 20 : 1 (Sheave diameter / Rope diameter)
Lubrication - Lubrication through sheave pin
Bearing - Heavy duty sealed cylindrical roller

Ropes
Rope Size (mm)
Design Factor -
Main Hoist and Auxiliary Host : Minimum 5.0
Luff Hoist and Pendant : Minimum 4.0

Rotation Characteristic -
Main Hoist and Auxiliary Host : Non.Rotating
Luff Hoist : Low Rotation
Pendant : Non-Rotating

Construction -
Main Hoist and Auxiliary Host :  RH and WSC
Luff Hoist : RH and IWRC
Pendant : WSC

End Connections -
Main Hoist, Auxiliary Host, Luff Hoist and Pendant :
Solid Thimble

Finishing -
Main Hoist, Auxiliary Host, Luff Hoist and Pendant :
Compacted and Galvanized

Hooks
Basic design factor of the hook is more than 4.0. The hooks are made of cast steel
and tested to -40°C, or -6°C below lowest design temperature. All hooks come with
lockable safety latch and swivel bearings.  Hook blocks will be of significant weight
to prevent unraveling of rope while unloaded.

Machinery Deck
Machinery Turrent
The Turret is made of high strength steel.  Depending on crane model and configuration,
most mechanical and control components such as the Power Pack,  Cabin and
Winches are placed on the Turret for best operational efficiency. Kicker  plates are
installed for safety as well as handrails around the Turret.

Operator Cabin
Structure - Steel plate
Position - Port of crane
Acoustic Shield - Noise level during operation ≤ 75 dBA
Weather  Shield - Complete sealed through for water runoff

Visionary  
Forward Windows - Clear Safety Glass
Side Windows - Clear Safety Glass; open-able
Rear View Mirror - N/A

Safety Equipment  
Safety Bar - Front & side windows to prevent accidental fall
Horn - Electric warning horn
Fire Extinguisher - 1.5kg Dry Powder

Accessibility  
Headroom - 2.1 meters
Door - Side slip door with lock
Maintenance
- Removable panels for access to cables & hoses
- Rooftop access for air conditioner maintenance
- Side access to front of cabin for window clearing and wiper replacement

Other Accessories   
Chair - Fully adjustable cushioned type
Communication - Equipment (PA Speakers Telephone set, VHF/UHF radios
and lound speaker with microphone system) free issue by shipyard.
Control Console - See CONTROLS AND INSTRUMENTS
Power - Power socket
Lighting - See ELECTRICAL SYSTEM
Windshield Wiper -  Electrical type
Air Conditioning - Roof top unit
Engraved Stainless Steel Plate
- Design certified load chart
Rope specification chart
- API monogram

Safety Features
Cabin
An annunciator is mounted in the cabin to alert the operator of possible risky
crane operation to avoid unfavorable incidents. This will be a solid state unit  “first out” alarm
sequence giving both audible and visual warning and fitting with test and acknowledgement buttons.

The audible and visual alarming signals are provided as following :
- High Return Pressure(filter jammed)
- Hoist Up Limit
- Hoist Down Limit
- Luff Up Limit
- Luff Down Limit with override for stowing
- Hydraulic Temperature High
- Hydraulic low level

Crane Operation Limit
Limit  switches  are  provided  to  define  safe  working  limits  of  all  crane  operations including
hoisting and luffing.
The functions of the limit switches are :
Operation : Main/Aux. Hoist
Detective Level : Upper Working Limit
Action : Stop Up Motion
Deactivation : Hoist Down

Detective Level : Lower Working Limit
Action : Stop Down Motion
Deactivation : Hoist Up

Operation : Boom Hoist
Detective Level : Lower Working Limit
Action : Stop Boom Down Motion
Deactivation : Boom Up or Override for Stowing

Detective Level : Upper Working Limit
Action : Stop Boom Up Motion and A&V warning
Deactivation : Boom Down

Detective Level : Ultimate Up Limit
Action : Stop Boom Up Motion and A&V warning continued
Deactivation : Boom Down

Safe Load Indicator
The Safe Load Indicator will provide the following to the operator:

- Crane rated capacity (T)
- Actual  load on hooks (T)
- Boom radius (meters)
- Boom angle (Deg rees)
- Visual alarm at 90% SWL
- Intermittent horn at 100% SWL
- Loud continuous horn at 105% SWL
- Overload cut off switch
- Mechanical  boom  angle  installed  at  the  boom  where  visible  from operator cabin

Standard Practices
- All ladders are welded with square rungs in diamond orientation with ladder cages.
- All handrails are made of galvanized pipe 48.3mm OD,  except those on boom sections
for weight saving purposes
- Cable trays are SS316 perforated.  Cables and hoses are secured with SS cable ties.
- All machined pins, end covers, and small adaptors are zinc plated to approximately 15
micron thickness.
- All fasteners M12 and below used are SS304.  All fasteners above M12 are Grade 8.8 or
equivalent, fluorocarbon coated.
- Slew bearing fasteners are ISO Grade 10.9, fluorocarbon coated
- Clear labels on all critical equipment onboard
- SS304 and/or white traffolyte with black inscriptions are chosen as standard for labeling

Surface Treatement
External Treatment :
Pedestal, crane house and boom -
- Surface preparation to ISO 8501-1, SA 2.5
- First coat zinc rich epoxy primer to 50 µm dry film thickness
- Second coat two pack epoxy to 100 µm dry film thickness
- Third coat polyurethane finish to 65 µm dry film thickness
- Total : three coats to 200 µm dry film thickness

Internal Treatment :
Pedestal and crane house -
- Surface preparation to ISO 8501-1, SA 2.5
- First coat zinc rich epoxy primer to 40 µm dry film thickness
- Second coat two pack epoxy to 75 µm dry film thickness
Oil tank (integrated in crane house) -
- 16.2.2.1 Surface preparation to ISO 8501-1, SA 2.5
- 16.2.2.2 First coat zinc rich epoxy primer to 40 µm dry film thickness

Boom -
No treatment as fully closed steel box structure

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
--------------------------------------------------------------------------------------------------------
Search words (for official use only) -
Offshore Lattice Boom Crane for Sale
Offshore Crane - 70 Ton - For Sale
Brand New Offshore Lattice Boom Crane - 70 ton
70 ton Offshore Lattice Boom Crane
New 70 ton Offshore Crane for Sale
70 ton New Offshore Crane
Brand New Offshore Crane for Sale
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR1136

Crane Barge for Sale
Barges for Sale
2001 built Crane Barge

General Specifications

Build Year : 2001
ABS : International Load Line

Dimensions : 188.2’ x 60’ x 12’
Gross Tonnage : 1054
Net Tonnage : 316
Hull Material : Steel

Spuds : Two square 42” x 85’ spuds with three spudwells
Spud Winches : Two CAT 7 Skagit RB90 3 Drum, Tier 3

Offices : Two water tight conex boxes with built in offices
Storage : Overhead steel storage with handrails
Generators : 19-457 Multiquip, 120 kW
Welders : One 400 Amp Miller Electric C.C.

Air Compressors :
Ingersoll Rand 25 hp electric with air dryer 105 cfm, MOD UPG-25

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
-----------------------------------------------------------------------------------
Search words (for official use only) -
Crane Barge for Sale
Used Crane Barge for Sale
Barges for Sale
2001 built Crane Barge
Crane Barge - 2001 built - For Sale
------------------------------------------------------------------------------------

Worldrigs ID: WR592

UMD 90 Land Drilling Rig - For Sale in Europe
New Semi Mobile Drilling Rig For Sale - UMD 90

Main Technical Specifications
Engine type : C 13 ACERT
Nominal engine power hp (kW) : 415 (309)
Transmission : Allison 4500 OFS
Nominal hoisting capacity metric ton (lbs) : 90 (198000)
Workover  depht (m) drill pipe (2 7/8”) : 4500
Drilling depht (m) (4 1/2“) : 1500
Rope diameter (mm) : 26
Mast height (m) : 32
Drilling floor height (m) : 5
Travelling system : 4x3
Working pressure (mpa) : 0, 65-0, 8

Technical Specifications
Drawworks
Main Drum -
Input power (hp) : 450
Barrel size : D18”  W38”
Brake rim size : D44” W12”
Wire line size : 1 ” (26 mm)
Drum speed : 6F/1R
Brake cooling : Water circulation
Brake system : Band / disc / auxiliary (Parmac SSR-28 hydro-brake)
Chain drives :
All chains are fully encloded for oil bath lubrication ensuring longer life
and cleaner operation

Lubrication :  Automatic or manual
Drum clutch : Air flex type

Sand Line Drum -
Barrel size : D13”  W37“
Brake rim size : D44” W9½”
Spooling capacity : 16114’
Sand line wire size : 9/16” (14 mm) - 5/8” (16 mm)

Rig Power & Transmission
Diesel engine(s) : Caterpillar C-13 ACERT, 415Hp, 2.100rpm
Transmission(s) : Allison OFS 4500 series with torque converter
Right angle gear box : Min 500 hp gear box in oil bath gear case
Compound box :
Twin engine drive through transmission includes disconnect clutches at
compound shaft for engines

Mast  & Crown Block
Mast -
Mast complete set : Design and conform to APİ 4F specification
Mast height : 32m  ( 118ft  )
Max. static hook load capacity : 900kN  ( 198.000lbs )
Racking capacity : 1.500m ( 4 ½’’ DP，19.2m double )
Height of the monkey board : 17.2m ( from floor )
Accessories : Standpipe , exproof  lightning....etc
Mast type : Hydraulic telescopic

Crown Block -
Crown block complete set : Design and conform to APİ 4F  specification
Max. hook load : 900kN (198.000lbs )
Number of sheaves : (2)  Main + (1) fast line  +  (1) deadline +  (1) sandline
+  (2) sheaves for service winch

Sheaves OD :
Fast Lines Ø32" ( Ø813mm )
Dead Line Ø28" ( Ø711mm )
Sand Line Ø28" ( Ø711mm )

Dia. of sheave’s grove :
Fast & Dead Lines Ø1" ( Ø26mm )
Sand & Winch Lines  Ø 5/8" ( Ø16mm )

Traveling Block  & Hook
Traveling block : 900kN Max. statik load, 3 sheaves, Ø32’’ sheaves
dia. Ø1’’  (Ø26mm ) groove dia.

Hook : 900kN Max. statik load, 3tons spring stroke
Elevator link(s) : 900kN rated load capacity.

Swivel
Static hook load, ton : 90
Working pressure, psi : 5,000
Maximum speed, rpm : 300
Coupling thread to stem : 4-1/2" Reg LH
Coupling thread to kelly : 6-5/8" Reg LH
Stem İ.D. : 2-1/2"

Trailer  & Other Systems
Trailer :
Three axles semi mobile trailer, 12 wheels, fabricated high tensile steel vehicle
frame reinforced at points of greatest stress. Highway equipment and cab included.
Installed fuel tank. Tool box. Auxilary drill line drum, all axles dressed brake, folding
walkwayss on both sides of trailer.

Hydraulic jacks : Four hydraulic operated leveling jacks
Hydraulic service winch : 5 metric tons drum pull capacity
Deadline anchor : Deadline anchor attached directly to trailer frame

Hydraulic system :
Hydraulic pump, system operate hydraulic cylinders on mast, hydraulic jacks, hydraulic
pipe tong, and hyraulic winch. Control valves, hydraulic oil tank, filters, pipes, hydraulic
and air valve connections, fittings.

Air system :
Compressor (engine drive), air tank, relief valves, air dryer, gauges, all clutches

Electrical lighting system :
All the electrical equipments on the mast, and substructure are ex-proof type

Instrumentation :
Driller control panel, weight indicator, gauges, air valves, cables, hoses, fittings, transducers,
paint

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.




-------------------------------------------------------------------
Search words(for official use only) :
UMD 90 Land Drilling RigRig For Sale
New Semi Mobile Drilling Rigs
Land Drilling Rigs For Sale
New Land Drilling Rig
New UMD 90 Drilling Rig For Sale in Europe
-------------------------------------------------------------------

Worldrigs ID: WR633

Ideco H35 KD Double (4200) - Used Workover Rig for sale
Workover Rig for sale
Ideco H35 KD Double (4200) for sale

General
Ideco H-35 KD 4210-38
Self-propelled double drum back-in Rated capacity at 3,400m w/ 73mm tubing
Engine - Detroit Diesel 8V-92TA (357KW/480hp)
Transmission - Allison CLT 5860 - 6 speed
Main drum brakes - 25.4cm x 106.7cm

Hydromatic brakes - Parmac 122 w/1,500L fluid capacity
Sand line brakes - 20.3cm x 96.5cm
Mast - Ideco 102-212 rated 94,340daN w/six lines
Racking capacity - 3,400m - 73mm
Double tubing 4,000m - 19mm triple rods

Travel blocks - McKissick 73A - 100 ton c/w spring
Lights - vapour-proof fluorescent & quartz floods
Drilling Line - 25.4mm x 518m wire rope 19mm - 25mm sucker rods
Sand line - 12.7mm x 3,700m wire rope
Weight indicator

Combination
2.74m x 12m change house/tool house
40 KW - Isuzu diesel generator

Handling Equipment
Gill model 500 tubing tongs c/w air back-up
Cavins model C power air slips
King Oil Tool elevators
Standard equipment - 60.3mm & 73mm EUE tubing

19mm - 25mm sucker rods
2 - 2.4m x 12.1m rig mats
Catwalk w/2 sets of pipe racks

Safety Equipment
4 - 14kg dry chemical fire extinguishers
2 - self-contained breathing apparatus w/spare cylinder
Gas detector
Safety & directional signs
Electrical ground bonding equipment
1 stretcher

Crown saver
Pipe ram saver
2 self retracting life lines

BOP Equipment
AEUB Class III BOP
152mm - 35,000 kpa Shaffer Spherical
152mm - 35,000 kpa Shaffer LWS with valve
NL Shaffer - 180 L - 21,000 kpa accumulator w/3 station controls & nitrogen back-up system
Hoses, remote station

73mm EUE - 35,000 kpa tubing safety valve
89mm rod BOP c/w handles
HD hydraulic oil saver
76mm x 9.1m swab lubricator w/ jars & tool trap
76mm swabbing valve - 21,000 kpa

Pump
Ellis Williams - model 440 - 102mm plungers x 152mm stroke 35,000 kpa
Engine - Detroit Diesel 8V-71 (268KW/360hp)
Transmission - Spicer - 5 speed
Mission 76mm x 50mm charge pump
Seven-valve reverse circulating manifold
Enclosed in steel building

Mud Tank
32m3 c/w mud guns & hopper
90m of 50mm line pipe & 12m of 101mm suction hose
Circulation degasser

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.




---------------------------------------------------------------------------------------------------------
Search words (for official use only) - 
Ideco H35 KD Double (4200) - Used Workover Rig for sale
Workover Rig for sale
Used American Workover Rigs
Workover Land Rigs in USA
Used Ideco H35 KD Double (4200) Workover Rig for Sale
Land Workover Rigs For Sale
Ideco H35 KD Double (4200) for sale
-----------------------------------------------------------------------------------------------------------

Worldrigs ID: WR2994

Grapnels for Rent
Grapnels for fishing chain for Rent

Description :

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Grapnels for fishing wire for Rent
BEL 139 Grapnel, capacity 250 Ton for Rent
Grapnel, capacity 250 Ton, tested to 350 Ton for Rent
Grapnels for fishing cable for Rent
Used Grapnels for fishing umbilical for Rent
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR759

Dredger for Sale
2007 Built Cutter Suction Dredger

Technical Details
Basic Details -
Year Built : 2007
Rebuilt : 2014

Principal Dimensions and Characteristics
Hull Dimensions -
Length with ladder raised (approx.) : 25 M - New as per GA
Waterline length (approx.) : 15 M - New as per GA
Width : 4 M - New as per GA
Depth : 1.6 M - New as per GA
Draft : 0.8 M - New as per GA

Engine Room Dimensions -
Length : 7.35 M
Width : 3.30 M
Height : 1.75 M
Base/side Fe430 B grade A RINA sheet thickness : 10 mm
Deck Fe430 B grade A RINA sheet thickness : 8 mm
Frame support spacing : 0.75M

Side Pontoons Dimensions -
Length : 15.50 M
Width : 1 M
Height : 1.5 M
Base/side Fe430 B grade A RINA sheet thickness : 10 mm
Deck Fe430 B grade A RINA sheet thickness : 8 mm
Frame support spacing : 0.75M

Control Cabin Dimensions -
Length : 2.05M
Width : 4.25M
Height : 2M
Base/side Fe430 B grade A RINA sheet thickness : 3 mm
Deck Fe430 B grade A RINA sheet thickness : 3 mm
Frame support spacing : 0.30M

General Dimensions and Characteristics of Dredger -
DWT : 56.3
GRT : 32.89
NRT : 29.73
Average Working Draft : 13.30M
Dredging depth : 12M
Fuel Tank Capacity : 5 ton
Ladder Length : 12M
Swing Anchors : 2

Swing Winches (2) -
Axis power : 16 Ton
Maximum speed : 20 M/min
First layer pull : 60 kN
Cable diameter : 22 mm

Dredging Ladder Raising Winch -
Axis power : 40 ton
Maximum speed : 1M/DK
Cable diameter : 40mm
Drum capacity : 4 ton
Swing Anchors : 2

Hydraulic Spud or Piles-Lifting Pistons -
Force : 5 ton
Stroke : 1.5M
Spud/pile Stroke : 1.5M

Crown-Type Cutter Head -
Number of motors : 3
Axis power : 85 kW
Speed range : 0 – 30 rpm
Cutter diameter : 1350mm
Axis diameter : 150mm - Lieu
Number of blades : 24
Cutter weight : 200 kg

Dredging Pump -
Make/Model : Linatex MK300/250
Type : Centrifugal-rubber lined
Impeller diameter : 600 mm
Number of blades : 4
Particle clearance : 100mm
Suction diameter : 320mm
Discharge diameter : 300mm
Speed : Max 900 rpm
Capacity : 2250 cbm/hr

Main Engine -
Make/Type/Model : Cummins VTA 1710 / Eng No-837BA
Power 2200 RPM : 650BHP @1500 rpm
Number of cylinders : 12
Electric starting : Yes by Battery

Dredging Pump Reduction Gear -
Type/Model : ZF/BW 195 A
Reduction ratio : 1.273-2.030
Oil Capacity : 23 Litres
Approx Weight : 325 Kgs
Nominal power : SAE HP X 1.014

Spuds/Piles -
Number of Spuds/Piles : 2
Length (approx.) : 10M
Diameter : 275mm
Thickness : 7mm
Weight : 750kg x 2

Steel tank capacity -
Ballast Tank : 23 ton
Fuel Tank : 5 ton
LO Tank : 80 litres
Others : Hydraulic oil tank : 1 ton

Consumption -
Fuel - While dredging : 82Litres/ hr
Fuel - While Idling : 35Litres/ hr
LO : 110 grams / hour

Excavator (Optional – Removed & kept – can be installed if required) -
Operating depth : 5M
Excavating Qty in M3 : 0.5m3
Operating mode : 4

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words(for official use only) :
Cutter Suction Dredger - 2014 Rebuilt - for Sale
Cutter Suction Dredger for Sale in Turkey
2007 Built Dredger for Sale
New Built Cutter Suction Dredger in Turkey
56.3 DWT Cutter Suction Dredger for Sale
----------------------------------------------------------------------------------------------------

Worldrigs ID: WR2047

Tugboat for Sale in Asia
1994 Built Tugboat for Sale

Description :

Year Built : 1994
Gross Tonnage : 272 M.T.
Designed Bollard Pull : 35.0 Tons
Dimension (L X B X D m) : 30.5 x 9.6 x 4.37
 Main Engine : 2 x 1600 BHP Stork Werkspoor Diesel 8FHD240G @ 1000 RPM
Class : IRS
Sister Ship Available : N
Available : 4Q/15

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

--------------------------------------------------------------------------------------------------------
Search words (for official use only) -
Tugboat - 1994 Built - for Sale
30.5m Tugboat for Sale
1994 Built Used Tugboat 
Tugboat for Sale in Singapore
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR2840

FSV - 2015 Built for Sale
Fast Supply Vessel for Sale

Description :

General
Hull : 65
Vessel Type : FSV - Fast Supply Vessel
Year Built : 2015

Dimensions
Dimensions : 201 ft. X 32 ft. X 14 ft. 6 in. (61.26 m X 9.75 mX 4.42 m)
Length Overall : 200 ft.
Clear Deck : 140 ft. x 26 ft. 6 in. (42.67 m x 8.08 m)
Deck Length : 191 ft. (58.22 m)
Cargo Deck Area : 3,710 sq. ft. (344.67 sq. m)
Deck Cargo Capacity : 395 LT (401.34 MT)
Deadweight Tonnage : 488 LT (495.83 MT)

Classification
ABS : Loadline
ABS : A1 Class
ABS : AMS (HSC DP2 Crewboat)
ABS : DP2
ABS : FiFi 1

Capacities
Fuel Oil : 40,000 gals. (151.42 cu m)
Ballast : 68,230 gals. (258.28 cu m)
Potable Water : 900 gals. (3.41 cu m)
Lube Oil : 840 gals. (3.18 cu m)
Waste Oil/Bilge Oil : 420 gals. (1.59 cu m)

Special Features
Positioning : DP 2
Steering and Controls :
Four (4) IMS 5 HP Electro/Hydraulic SteeringUnits, Three (3) Stations
Firefighting :
Two (2) Monitors @ 6,000 GPM each CO2Fire Suppression and Alarm
MonitoringSystems
Oil Dispersant System

Machinery
Main Engines : Four (4) 3512C CAT Diesels,  2,250 BHPeach @ 1,800 RPM
Bow Thrusters : Two (2) 200 HP Thrustmaster  30TT200-ALTunnels
Speed : 28 knots
Generators : Two (2) CAT C9 @ 80 kW

Life Saving Equipment
Life Rafts : Four (4) 25-Man Inflatable Life Rafts
Personnel Rescue Davit
Other gear as required by authorities

Electronics
Electronics Package :
Two (2) Furuno FAR2117 Radars, One (1)ICOM M504 VHF Radio, One (1)
Sea 235SSB Radio, One (1) Depth Recorder, One (1)Navtex Receiver,
One (1) Color VideoSounder, One (1) GPS, One (1) RLB-32EPIRB,
One (1) Loud Hailer, One (1) IdealG2HC Windlass, One (1) AIS,
MarineTechnologies DP 2 Integrated Vessel ControlSystem

Accommodations
Accommodations : 10
Passengers : Normal Operations: 56
Passengers : Safety Standby: 106

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Used Fast Supply Vessel for Sale
Fast Supply Vessel - 2015 Built - For Sale
ABS Class Fast Supply Vessel for Sale
Used 2015 Built Fast Supply Vessel for Sale
201ft FSV for Sale
--------------------------------------------------------------------------------------------------------

Worldrigs ID: WR2061

Deck Barge - 35mt - for Sale
2015 Built Barge for Sale

Description :

Built : 2015 just launched in lstanbul
Dimensions : 35 mt x 12 mt x 2 mt
DWT : 500 tons
Deck strenght : 10 tons / m2
Class : BV : I + Hull , Pontoon , Unrestricted Navigation
Depth M : 2.75 mt
Draught : 2 mt
Paint : Jotun
 
Ready for delivery
Price : upon request

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------------
Search words (for official use only) -
Deck Barge for sale
2015 Built Deck Barge for sale
35 mt x 12 mt  Deck Barge for sale
Deck Barge for sale in lstanbul
-------------------------------------------------------------------------------------------------

Worldrigs ID: WR2531

Year built/Rebuilt ; 2009
Estimated Drilling Depth : 12,000 ft
Estimated Rig Move Loads : 15
Estimated Camp Move Loads : 4
Rated HP : 550

Mast
Height : 72.00 ft
Static Hook Load Capacity: 500,000 lbs
Mast Racking Capacity : N/A

Substructure
Style : Box Type
Height : 14.80 ft
Clear Height : 10.60 ft
Casing Capacity : 500,000 lbs
Maximum Setback Load (lbs.) : N/A

Drawworks
Model : RT400B
Power Rating : 1000 hp
Input Power : 1 ea. Caterpillar C15
Brake Type- Band or Disc : Band
Drilling Line Size : 1 1/8"
Auxiliary Brake : Eaton Airflex-WCBD

Top Drive / Power Swivel
Make : Venturetech
Model : XK-250
Capacity : 250 Ton
Torque-Continuous : 22K ft./lbs

No Swivel
No Rotary Table

Power Generation
Engines : 2 ea. Caterpillar C 15
Generators : 2 ea. Caterpillar SR 4 B
SCR / VFD / DC/DC : Mechanical Rig

Enhancements
Fork Lift : Caterpillar 930 H
Iron Roughneck : Blohm & Voss Florrhand 9GF 1002
Pipe Arm : US Oil Tools

Mud System
Mud Pumps : 2 ea Hong Hua HHF-1000, 1000 hp @ 140 spm
Reserve Mud Volume : 0 bbls
Pressure Rating : 5,000 psi
Active Mud Volume : 700 bbls
Shale Shakers : 2 ea. Derrick Corporation FLC 504
Desander : Derrick Corporation 10" x 3 Cones
Desilter : Derrick Corporation 4" x 16 Cones
Mud Cleaner : N/A
Centrifuge : N/A

Well Control
Annular : 11" 5,000 psi, Shaffer, Spherical
Double Ram : 11" 5,000 psi, Shaffer, SLWS
Choke Manifold : MD Cowan Inc., 3 1/8" 5,000 psi
BOP Closing Unit : Bear Equipment Company, 5 Station 3,000 psi

Price & terms : Please enquire using the email form below

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
-----------------------------------------------------------------------------------------
Search words (for official use only) : 
Used 2009 Built Super Single Rig for Sale
550HP Trailer Mounted Hydraulic Lift, Super Single Rig for Sale
Mechanical Drilling Rig - 2009 Built - For Sale
550HP Trailer Mounted Hydraulic Lift Drilling Rig - For Sale
Used Land Drilling Rig - Trailer Mounted For Sale
Used 550HP Trailer Mounted Drilling Rig - for Sale
2009 built Super Single Rig for Sale
Super Single Drilling Rig - 2009 Built - For Sale
------------------------------------------------------------------------------------------

Worldrigs ID: WR771

Driltech T25K3W Drilling Rig for Sale
Driltech Drilling Rig - 1994 Built for Sale

Model : T25K3W Drill Rig
Manufacturer : Driltech
Year : 1994
Condition : Used

Description :

1994 Driltech T25K3W Drill Rig- S/N: 731889
Sullair 840 cfm / 350 psi Air Compressor
CAT 3406 DITA Diesel Deck Engine - rated 430 HP @ 1,800 RPM
30,000 LBS of Pullback
28 ft Head Travel
Pipe Rack Holds For 15 Pipe
(6) Rod Carousel
Rotary Head - rated 89 RPM & 62,600 in LBS. Torque
Jib Boom, Hydraulic Extend With 172 Degree Hydraulic Swing
Hydraulic Winch 7,500 LBS. Capacity
20" Openiing in Table With Hydraulic Adjustment
48" Jaw Type Breakout Wrench
Water Injection Pump is 20 GPM With Foam Pump
DTH Lubricator With 10 Gallon Tank
Fine Feed  & Torque Controls
420 ft. of Used Drill Pipe (4-1/2" O.D. X 20ft) & Basic Tooling Included
Gardner Denver 5 X 6 Air Drive Mud Pump on Board
Hydraulic Leveling Jacks
Mounted on a 1993 Ford LNT8000 - VIN #1FDZW82E0PVA18231
Cummins 8.3l 275 Hp Diesel Engine
10 Speed Transmission
18,000 Front Axle
46,000 Rear Axle

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Drilling Rig - Driltech T25K3W- for Sale
Used Driltech T25K3W Drilling Rig for Sale
1994 Built Driltech Drilling Rig for Sale
Land Drilling Rig for Sale in USA
Driltech Used Drilling Rig for Sale in USA
---------------------------------------------------------------------------------------------------------

Worldrigs ID: WR734

Chinese Drilling Rig for Sale
New Chinese 3000HP Drilling Rig for sale
Land Drilling rig for sale - 3000hp

Technical Parameters
Hoisting system :
Mast -
Model : JJ675/48-K, Qty : 1
Mast body - Qty : 1
Accessory of Mast - Qty : 1
Racking Board - Qty : 1
Casing Stabbing Board - Qty : 1

Substructure -
Model : DZ675/12-S, Qty : 1
Substructure body - Qty : 1
Accessory of Substructure - Qty : 1
BOP lifting unit BOP (60 T) - Qty : 1
Hydraulic automatically handing pipe Unit - Qty : 1

Drawworks -
Model : JC90DB, Qty : 1
Drawwork body - Qty : 1
Hydraulic disc brake - Model : PSZ75-70, Qty : 1
Drawworks Electric Motors - 1600kw/600V, Qty : 2

Auto bit feed motor (45KW), Qty : 2

Auto bit feed device - Qty : 2
Crown block - Model TC675, Qty : 1
Traveling Block - Model YC675, Qty : 1
Hook - Model DG675, Qty : 1
Dead Line Anchor - Model JZG720, Qty : 1

Drill line spooler - 2000m,φ45mm, Qty : 1
Elevator Link (4500KN), Qty : 1

Rotary System
Rotary table and rotary table independent Drive Unit - Qty :1
Rotary Table - Mode : ZP-495, Qty : 1
Rotary Table Independent Drive Unit - Qty : 1
Rotary Table motor - Model : YJ13/800KW, Qty
Bushing and Mast Bushing - Qty : 1

Swivel - Model : A750, Qty :  1
Top Drive Systems - Model : 1275AC, Qty : 1

Mud Pumping System
Mud pumps - Model : HHF-1600, Qty : 4
Mud Pump Driving Unit - Qty : 4
Mud Pump Driving Motors - Model : YJ13 /1200kw, Qty : 4
Mud Pump Charging Pump unit - Model : SB6"x8" J-12 1/2", Qty : 4

Ground Mud Manifold - Qty : 1
Double Mud Manifold - Qty : 1
Rotary Hose - 35Mpa, 4", 19m and 23m, Qty : 1
Cementing Manifold - 70Mpa(10000PSI), Qty : 1

Mud System/Solids Control Equipment
Low Pressure Mud System - 6 tanks,400cbm, Qty : 1
Shale shaker - Model : Derick FLC-2000-4, Qty : 3
Derrick Vacuum Degasser - Model : Derrick FLO-1200, Qty : 1

Mud cleaner system
Mud cleaner - Model : FLC-2000, Qty : 1
Mud cleaner supply fluid pump - Model : SB6"X8"J-13 55KW, Qty : 1

Centrifuge System
Middle speed Centrifuge - Model : LW450×1000-N1, Qty : 1
High Speed Centrifuge - Model : LW450×1000-N3, Qty : 1
Centrifuge pump - Model : SB2”×3”J-9", Qty ; 1

Mud Mixing System
Mud Mixing pump - Model : SB6”×8”J-13", Qty : 2
Mixing Hopper with Shear device - Model : ZHP-150, Qty : 2

Mud shearing system -
Shear Pump - Model : WJQ5”X6”-10”, Qty : 1
Mixing Hopper with Shear device - Model : ZHP-150, Qty : 1

Mud supply system
Triping tank
Triping pump

Agitator
Agitator - Model : NJ-15, Qty : 15
Agitator - Model : NJ-5.5, Qty : 1
Mud Guns - Qty : 18
Pill tank - 2.5cbm, Qty : 1
Mud charging unit for casing pipe - 3", Qty : 1
Poorboy - Model : NQF3/7, Qty : 1
Mud lab with Tools - Qty : 1
Mud dividing box - Qty : 1
Bell nipple - Qty : 1
Flow line (from active tank to bell nipple) - 12", Qty : 1

Generator & Electrical System
Rig Diesel Engines Generator Sets - Model : 3512B,50HZ, Qty : 5
Auxiliary Genset - Model : CAT3406,292KW,50HZ, Qty : 1
Generator house - Qty : 5

VFD/MCC System - Qty : 1
Driller’s Console - Qty : 1
Monitor System - Qty : 1
Rig Intercom System : two from USA and others from China, Qty : 1
Electrical Power and Control /Lighting System - Qty : 1
600V Power and Control System - Qty : 1
400V Power and Control System - Qty : 1
Grounding (Earthing ) System - Qty : 2
Plug Station - Qty : 1

Driller cabin and drilling instruments - Qty : 1
driller control cabin
Instrumentation system for drilling parameters

Miscellaneous
Air Supply System - Qty : 1
Screw Air Compressor - Model : QTD45 HH, Qty : 2
Cold Type Air Dryer - Mode : JYH-75F, Qty : 1
Cold Start Air Compressor with both start - Model : ZY-1.42/10-(c), Qty : 1
Air filter - Qty : 3
Air Storage Tanks - 4cbm+2.8cbm, each 1
Main Air Lines - 2", Qty : 1

Dog House - Qty : 2

Drill floor tool
Drill Pipe Power Tongs - Model : ZQ203-100, Qty : 1
Hydraulic Casing pipe Power Tongs - Model : TQ35-340, Qty : 1
Air Winch - Model : XJFH-5/35, Qty : 2
Air Winch(on racking board) - Model : JQH-5X48, Qty : 1
Hydraulic tool lifter - Qty : 1

Hydraulic Power Unit - Model : ZHYZ1000Ⅱ, Qty : 1
Cooling Water Tanks - 15cbm, Qty : 1
Industry water Tanks -80cbm, Qty : 2
Fuel Storage Tank - 60cbm, Qty : 1
Cable tray - Qty : 1
Assembly fittings - Qty : 1

Tool
Tools for mud pump fixing - Qty : 1
Tools for mast fixing - Qty : 1

Safety equipment - Qty : 1
Mast safety equipments - Qty : 1
Skidproof mat for rotary table - Qty : 1
Wash eyes station - Qty : 3

Cathead - Model : YM-16, Qty : 2

BOP System
21 1/4" BOP stack - Qty : 1
21 1/4" Annular BOP - Model : FH54-14, Qty : 1
21 1/4" Drilling spool - Model : FS54-15, Qty : 1
Hydraulic control ball valve - 2000psi, Qty : 1
Manual control ball valve

21 1/4" Double rams BOPs - Model : FZ54-16
Double rams BOPs
Rams

13 5/8"I BOP stack
Single ram BOP - Model : FZ35-70, Qty : 1
Double rams BOP - Model : 2FZ35-70, Qty : 1
Annular BOP - Model : FHZ35-35, Qty : 1
Drilling spool - Model : FS35-70, Qty : 1
Rams

BOP control system
BOP control device - Model : FKQ1200-8, Qty : 1
BOP control high pressure hose with fireproof and heat insulation - 35mMpa, Qty : 1
BOP test device - Model : QST-140J, Qty : 1

Choke and kill manifold
Choke line - Qty : 1
Choke manifold - Qty : 1
Choke manifold control panel - Model : GYK-70, Qty : 1
Relief line - Qty : 1
Kill manifold - 70Mpa, Qty : 1

Kelly
Hexagonal kelly - 5 1/4", Qty : 1
Hexagonal kelly - 3 1/2", Qty : 1

Drill Pipe
DP - 5" G105, Qty : 7000
DP - 3 1/2" G105, Qty : 3000
Pipe pup joint - 5" (5ft,10ft, 15ft)31/2" (5ft,10ft,15ft), Qty : 2.0

Heavy weight DP
Heavy weigh DP - 5" *9450H* NC50*18°, Qty : 50
Heavy weight DP - 3 1/2"*9450H* NC38*18°, Qty : 30

Drill collar
Spiral Drill collar - 9 1/2", L=30', Qty : 6
Spiral drill collar - 8", L=30', Qty : 24
Spiral drill collar - 6 1/2'' , L=30', Qty : 30
Drill collar - 6 1/2'' , L=30', Qty : 24
Spiral drill collar - 4 3/4”, Qty : 18
Drill collar - 4 3/4”, L=30', Qty : 18
Short drill collar -
Short drill collar - 9-1/2"*10', Qty : 2 jts
Short drill collar - 8"*10', Qty : 2 jts
Short drill collar - 6-1/2"*10', Qty : 2 jts

Lifting sub
Lifting sub - 9 "*7 5/8 REG*1.22m, Qty : 2 jts
Lifting sub - 8"*6 5/8 REG*1.22m, Qty : 8 jts
Lifting sub - 7"*NC50* 1.22m, Qty : 10 jts
Lifting sub - 4 3/4" *NC38*1.22m, Qty : 8 jts

Stabilizer
DP stabilizer -
17 1/2", Qty : 2
12 1/4", Qty : 2
8 1/2", Qty : 2

Near bit stabilizer -
17 1/2", Qty : 2
12 1/4", Qty : 2
8 1/2", Qty : 4

Inner blowout preventer
Kelly cock valve -
5 1/4" upper cock valve, Qty : 1
6 1/4" down cock valve, Qty : 4
31/2" down cock valve, Qty : 4

Tubular floating valve - 730*730,630*630 430*410,330*310, Qty : 1 each
Dropping check valve - for 5" DP,3 1/2" DP, Qty : 2 each

Tubular tools
Manual tong - 350T, Qty : 4
Manual casing tong - 250T, Qty : 4

Drill pipe elevator
5''drill pipe elevator - 5", Qty : 4
3 1/2'' drill pipe elevator - 3 1/2", Qty : 4

Drill Pipe Slip
5" drill pipe slip (SDXL) - 5", Qty : 4
31/2" drill pipe elevator - 250T , Qty : 4

Drill collar elevator
9 1/2"drill collar elevator - 150T, Qty : 2
8'' drill collar elevator - 150T, Qty : 2
6 1/2'' drill collar elevator - 150T, Qty : 2
4 3/4” drill collar elevator - 150T, Qty : 2

Lifting plug
9 1/2“Drill collar lifting plug - Qty : 2
8''Drill collar lifting plug - Qty : 2
6 1/2'' Drill collar lifting plug - Qty : 2
4 3/4''Drill collar lifting plug - Qty : 2
5“Drill collar lifting plug - Qty : 5
3 1/2“Drill collar lifting plug - Qty : 3

Drill collar slip
9 1/2“Drill collar lifting plug - Qty : 2
8''Drill collar lifting plug - Qty : 2
6 1/2'' Drill collar lifting plug - Qty : 2
4 3/4''Drill collar lifting plug - Qty : 2

Safety slip (clamp) :  - for 3 1/2"-9 1/2", Qty : 4

Side door casing elevator
20”side door casing elevator - Qty : 2
13 3/8”side door casing elevator - Qty : 2
9 5/8"side door casing elevator - Qty : 2
7"side door casing elevator - Qty : 2
5" side door casing elevator - Qty : 2

Single casing elevator
20”side door casing elevator - Qty : 2
13 3/8”side door casing elevator - Qty : 2
9 5/8"side door casing elevator - Qty : 2
7"side door casing elevator - Qty : 2
5" side door casing elevator - Qty : 2

Casing caliper
20”side door casing elevator - Qty : 1
13 3/8”side door casing elevator - Qty : 1
9 5/8"side door casing elevator - Qty : 1
7"side door casing elevator - Qty : 1
5" side door casing elevator - Qty : 1

Bit breaker (with conversion device)
for 26" bit - Qty : 1
for 17-1/2" bit - Qty : 1
for 12-1/4" bit - Qty : 1
for 8-1/2" bit - Qty : 1
for 6" bit - Qty : 1

Fishing tool
Overshot - for 17 1/2",8 1/2",6" well eye, Qty : 1 each
Junk Subs :
for 17 1/2" - Qty : 1
for 8 1/2" - Qty : 1
for 6" - Qty : 1

Reverse circulating junk basket
for 17 1/2" well eye, Qty : 1 each
for 12-1/4" well eye, Qty : 1 each
for 8-1/2" well eye, Qty : 1 each

Strong fishing magnets - OD:10 1/2" ,7", Qty : 1 each
Fishing taper - OD:6 1/2" ,4 3/4", Qty : 1 each
Lead Impression block - 11",8", Qty : 1 each
Fishing jar (hydraulic top jar) - 8",6 1/2",4 3/4", Qty : 1 each
Fishing jar (mechanical open bumper jar) - 8",6 1/2",4 3/5", Qty : 1 each
Flat bottom mill :
12 1/4",8 1/2", Qty : 3 each
6", Qty : 2 each

Sub
Bit sub , Qty : 1 each
Crossover joint , Qty : 1 batch
Kelly saver sub - 5 1/4" 3 1/2" , Qty : 4 each

Others
Circulating sub of drill pipe - for 4 1/2" 3 1/2" casing , Qty : 1 each
Plug for casing pressure test - for13 3/8" 9 5/8" casing , Qty : 2 each

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------
Search Words(for official use only) :
Chinese Drilling Rig for Sale
Land Rig for sale - 3000hp
3000HP Drilling Rig for sale
New 3000hp Chinese Rig
3000hp Chinese Rig for Sale
 New  drilling rig for sale
---------------------------------------------------------

Worldrigs ID: WR1316

Flushby Coiled Tubing Unit for Sale
2007 Built Combo Coiled Tubing Unit for Sale
CT Unit with new Injector for Sale

Description :

Manufacturer : Mack
Model : MR 688S
Year : 2007
GVW : 34,000 kg
Engine Model : E7 454
Horsepower : 454 HP at 1,200 RPM
Transmission : Eaton Fuller 10 speed

Raydan air suspension front and rear
44ft Derrick with 50,000LB pull capacity
Pullmaster HL25 main winch
Pullmaster PL5 Cat Line Winch
7.1 M³ TC406 tank

New 40,000 LB CMS injector 
New coiled tubing reel with 3,300m

Capacity of 1-1/2” coiled tubing
Comp air #5450 compressor rated for 
212 CFM at 1,500 PSI
323 Oilwell triplex pump rated for 
150 Lpm At 2,200 PSI
Linde hydraulic system

Specifications :
Coil Tubing OD Size Range : 1/4 in - 2-3/8 in (6.35 mm - 60.33 mm)
Hydraulic Pressure at Maximum Pull Capacity : 3,662 psi (25.25 MPa)
Continuous Pull Capacity : 40,000 lbs (18,144 kg)
Snubbing Capacity : 20,000 lbs (9,072 kg)
Maximum Speed : 200 ft/min (60.96 m/min)
Injector Width : 32 in (81.3 cm)
Injector Depth (in direction of guide arch) : 36 in (91.4 cm)
Injector Height (from base to top of lifting frame) : 92 in (233.7 cm)
Total Dry Weight - Injector : 2,400 lbs (1,089 kg)

Year Of Manufacture : 2005
Nominal Capacity : 7,100 L (1,876 US Gal)
Max Temperature : 90 °C (194 °F)
Designed Pressure Rating : 22.7 KPa (3.29 psi)
Test Pressure : 34.5 KPa (5.00 psi)
Shell Material : A1011CS-B
Head Material : A1011CS-B
Weld Material : ER70-S6
Min Head Thickness : 3.20 mm (0.126 in)
Manufactured Head Thickness : 3.42 mm (0.135 in)
Min Shell Thickness : 3.20 mm (0.126 in)
Manufactured Top Shell Thickness : 3.42 mm (0.135 in)
Manufactured Bottom Shell Thickness : 6.35 mm (0.250 in)
Max Product Load : 7,100 Kg (15,653 lb)
Product Density : 1.0 Kg/L (8.345 lb/US Gal)
Max Load Rate : 2,800 L/min @ 20.7 KPa (739.7 US Gal/min @ 3.00 psi)
Max Unload Rate : 2,000 L/min @ 2.6 KPa (528.3 US Gal/min @ 0.38 psi)
 
Price & terms : Please enquire using the email form below.

If you cannot find the Mobile Hospital Unit that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of containers where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------------------------------------------------
Search words (for official use only) -
Flushby Combo Coiled Tubing Unit for Sale
Combo Coiled Tubing Unit for Sale
2007 Built Coiled Tubing Unit for Drilling
Combo CT Unit with New Injector & Coiled Tubing Reel
Flushby Coiled Tubing Unit - 2007 built
CT Unit for Sale
----------------------------------------------------------------------------------------------------------

Worldrigs ID: WR2962

Chain Stoppers for Rent
Ratchet and fixed Anchor Chain Stoppers for Rent

Description :

Ratchet and fixed anchor chain stoppers for 76 to 120 mm

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Ratchet and fixed Anchor Chain Stoppers for 76 to 120mm for Rent
Anchor Chain Stoppers for 76 to 120mm for Rent
Fixed Anchor Chain Stoppers for Rent
Used Chain Stoppers for Rent
Used Ratchet and fixed Anchor Chain Stoppers for Rent
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR660

Schramm T130 Drill Rig For Sale
Used Schramm T130 Drill Rig for Sale

Model : T130 Drill Rig
Manufacturer : Schramm
Model Year : 2003
Condition : Used

Description

2003 Schramm T130 Drill Rig - S/N: J130-0707
Detroit DDC/MTU V12-2000TA DDEC Diesel Deck Engine
Mast: Telescoping construction permits long head travel 50’' ft
Note: Shorter length in transport position
130,000 lbs of Pullback
Free standing design with 28"” table opening
Sullair 1350 cfm / 350 psi Air Compressor (Rebuilt with low hours)
Hydraulic pumps (low hours since rebuilt)
Top Head: Fixed position - two hydraulic motors. 0-143 RPM with 106,600 in-lb of torque
Pipe handling sling
Set up for RD20 style (4-½”" X 30'’ X 2-7/8" IF) Drill Pipe
Carousel
Cat Water Injection Pump
Graco Hammer Lubricator
Mounted on a CCC (Crane Carrier Company) Truck - VIN#: 1CYDGD5843T046189
CAT diesel engine
425/65R22.5 front tires 12R22.5 rear tires
Sub Base: 9'’ wide 40'’ long and 3’' tall & Basic Tooling Included

Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
--------------------------------------------------------------------------------------------------------------------
Search words(for official use only) -
Schramm T130 Drill Rig For Sale
Schramm Land Drilling Rig For sale
Drilling Rig - Schramm T130 For Sale
Used Schramm T130 Drill Rig for Sale
Schramm T130 Drill Rig For sale
Used Drilling rig for sale in USA
----------------------------------------------------------------------------------------------

Worldrigs ID: WR1327

LPG Propane Storage Tank for Sale
Used Flint Steel LPG Storage Tank for Sale
1955 Built - 30,000 Gallon LPG Propane Storage Vessel for Sale

Description
Quantity : 1
Manufacturer : Flint Steel
Year : 1955
Dimensions : 108" OD x 70' OAL
Pressure : 250 psi
Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

         

-------------------------------------------------------------------------------------------------------
Search words (for official use only) :
LPG Propane Storage Tank for sale
1955 Built Flint Steel LPG Storage Tank for Sale
Used 30,000 Gallon LPG Propane Storage Vessel for Sale
LPG Storage Tank for Sale
Flint Steel LPG Propane Storage Vessel for Sale - 1955 Built
30,000 Gallon Capacity LPG Propane Storage Tank for Sale
Used Flint Steel LPG Storage Tank for Sale
-------------------------------------------------------------------------------------------------------

 

Worldrigs ID: WR2845

Class : ABS, USCG, SOLAS, MARPOL

Dimension
LOA : 190ft (57.91m)
LBP : 180ft (54.86m)
Breadth : 44ft (13.41m)
Depth : 19ft (5.79m)

Draft (min. operation) : 10ft (3.05m)
Draft (normal operational) : 15ft (4.57m)
Draft (load line) : 16.3" (4.95m)
Freeboard @ nor. opr. draft : 4.0ft (1.22m)
Lightship (est.) : 1000 Ltns.
Gross Tonnage (ITC est.) : 1300

Deadweight
Deadweight @ 10ft (min ops draft) : 594 l.tns
Deadweight @ 15ft (normal ops draft) : 1710 l.tns
Deadweight @ 16.281ft (load line) : 1915 i. tns

Cargo Capacities
Deck -
Free Deck Space : 39.32m x 10.67m
Clear Deck Area : 419.46 sq.m.
Deck Strength : 540 # / ft2
Deck Cargo : 1300 l. tons

Speed (est@ SSO)
Speed @ 10ft Draft : 13.2 knots
Speed @ 10.5ft Draft : 13.1 knots
Speed @ 12.25ft Draft : 12.3 knots
Speed @ 13.75ft Draft : 11.6 knots
Speed @ Norm Ops Draft (15ft) : 11.3 knots
Speed @ Load Line (16.281ft) : 10.9 knots

Main Propulsion
1 x 3512 Cat Diesels
1280 BHP @ 1600 erpm each

Azimuth Drives
2 x 900H Ulstein
4 Blade FPP

Bow Thruster
1 x Ulstein TCNS 73/50 swing up (3508 Cat)

Generators
Ships Service Diesel Generator - 2 x 300kw (3406 Cats)
Emergency Diesel Generator - 1 x 170kw (3306 Cat)

Ship Motions
2 Passive Type Anti-Roll Tank
Bilge Keels

Accommodations
1 x 1 man
3 x 4 man
Total : 13

Life Saving
1 x Rescue Platform
1 x Rescue Lifeboat and SOLAS Davit
2 x 20mn. Inflatable Life Rafts
2 x 10mn. Inflatable Life Rafts
Other gear as required by USCG

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
190 FT Offshore Supply Vessel For Sale
57.91M OSV for Sale
ABS Class Offshore Supply Vessel for Sale
13 Accommodation Capacity OSV for Sale
Used OSV - 190ft - for Sale
------------------------------------------------------------------------------

Worldrigs ID: WR480

Heavy lift Semi Submersible Deck Barge for Sale
Semi-Submersible Heavy Lift Barge for sale - 122mts - 2009 built
Semi Sub Heavy lift Barge/Vessel for sale

General :
Year built : 2009
Class : Lloyd Class + 100A1 Pontoon
Type : Spoon Head

Nos. of Trans bhd : 8 nos.
Nos. of Longl bhd : 2 nos.
Nos. of Swash bhd : 1 no.
Nos. of compartment : 24 nos.
Submersible depth : 7m above the main deck

Principal Dimensions :
Length O.A : 122m
Beam : 36.58
Depth : 7.62m
Deadweight : 19300 dwt
GRT : 9741 tons
NRT : 2922 tons

Equipment & Accessories :
3060kg Bower Stockless Anchor
46mm dia x 250m SWR
76mm dia towing chain with 3 x 25m & 1 x 10m
1 nos. of retrieving winch with 32mm dia SWR
Towing brackets : 3 x 160t
Zinc anode : 76 pcs.
Solar navigation light : 6 pcs

Manholes/Bollard/Panama Chock
ASCUE SWB pump : 2 x 1000 cbm/hr @ 25m head
ASCUE central priming pump : 2 units
Remote control butterfly valve : 45 pcs
ASCUE bilge/ fire pump : 90 cbm/hr x 60m head
F.O. transfer pump : 2.5 cbm/hr @ 3 bar
Bilge/Sludge pump : 2.5 cbm/hr @ 3.5 bar
Remote tank guaging for 26 tanks
Draft gauging : 4 pcs
Electric motor anchor winch

Electrical switch gear : 1 shipset
Electric heater : 3 units
CAT 3412 DITA diesel generator 480 kw 415/3/50 : 2 units
SPERRE air compressor motor driven 39.8 cbm/hr @ 30 bar
SPERRE air compressor diesel driven 12.1 cbm/hr @ 30 bar

Scantlings :
Deck : 20mm Grade B
Side : 20mm Grade B
Bottom : 20mm Grade B
Trans bhd : 12t/14t/16t grade A
Longl bhd : 12t/14t/16t grade A
Deck loading : 20t/sqm
Clear width on deck 28.5m between caisson inner wall

Price & terms : Please enquire using the email form below

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your requirements
and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

--------------------------------------------------------------------------------------------------
Search words(for official use only) - 
Heavy Lift Semi Submersible Barge For Sale in South America
Semi Submersible Heavy Lift Vessel For Sale Worldwide
Heavy Lift Semi Submersible Barge For Sale in Nigeria, West Africa
Semi Submersible Heavy Lift Barge For Sale
Heavy Lift Deck Barge For Sale in Asia, Singapore, Malaysia
Heavy Lift Semi Submersible Barge For Sale in Middle East
--------------------------------------------------------------------------------------------------

Worldrigs ID: WR2866

30,000 Gallon LPG Propane Tank for Sale
Propane LPG Tanks - 1977 Built - For Sale

Description :

Built : 1977
ASME certified
250 PSI
Dimensions : 108"DIA x 67ft OAL Approx.

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
LPG Propane Tanks - 30,000 Gallon - For Sale
Propane Storage Tanks for Sale
LPG Propane Tanks - 30,000 Gallon - For Sale
1977 Built Used Propane LPG Tanks for Sale
NGL/LPG Propane Storage Tanks
----------------------------------------------------------------------------------------------------------

Worldrigs ID: WR846

Schramm T130 Drilling Rig for Sale
Drilling Rig - Schramm T130 - For Sale

Model : T130 Drill Rig
Manufacturer : Schramm
Condition : Used

Description :

Schramm T130 Drill Rig
Diesel Deck Engine
Mounted on a CCC Truck
Diesel Engine

Included as a package:
4-1/2" Bottle Neck X Hole Drill Pipe
6" Collars = 90 ft
All Subs needed to drill
Spare Motor
Spare Parts : Top Drive (Rebuilt no hours), New Spindle,
Bearings for top drive, Chive Crown
Pipe Racks with Catwalk (30 ft L X 5 ft W X 3-1/2 ft T)

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Schramm Drilling Rig for Sale
Used Schramm T130 Drilling Rig for Sale
Schramm T130 Drilling Rig for Sale in USA
C for Sale
Schramm Used Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR2221

4.55M Submarine for sale
6 Passenger Exploration Submarine - For Sale

Description
This exploration submersible offers you and five of your friends,
family or colleagues the opportunity to explore the oceans in
complete comfort. The exceptional, optically-perfect acrylic hull
and staggered seating arrangements affords everyone an
uninterrupted upward, forward and downward view of the
fabulous majesty of the ocean.

For the ultimate luxury, the  cabin can be configured to seat four.

Specifications
General -
Depth : 3,280ft / 1,000m
Payload : 1,760lb / 800k
Crew : Pilot + 5 Pax
Speed : 3kts
Endurance : 10+ hours
Main Ballast : 8,800lb / 4,000kg
Variable Ballast : 550lb / 250kg

Size and Weight
Length : 14.9ft / 4.55m
Width : 11.8ft / 3.6m
Height : 7.9ft / 2.4m
Weight : 22,000lbs / 10,000kg
Pressure Hull Volume : 180cuft / 5.1m3
Hatch Inner ø : 21.7in / 700mm

Systems
24v Supply : Dual Supply + Emergency
Main Battery : 45 kWh
Main Thrusters : 2x5hp / 2x3.7kW
Vertran Thrusters : 2x5hp / 2x3.7kW
Control : Joystick, Touch Screen + Manual Override
External Lights : 6+ x 20,000 lumen LED
Life Support : Oxygen & CO2 Scrubber

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------------
Search words (for official use only) :
6 Pax Exploration Submersible for Sale
4.55M Submarine for sale
6 Passenger Exploration Submarine - For Sale
13ft Exploration Submarine for Sale
1000M Depth New Submersible for sale
Submarine - 6 Pax - For Sale
New Submarine for Sale
------------------------------------------------------------------------------------------

Worldrigs ID: WR370

Vetco Style Risers MR6-C for sale

Have available :
12 joints of NEW Vetco MR6-C style risers are 50 foot in length.

They have 39 inch support flanges, Choke & Kill lines are 4-3/8 inch O.D. and they are
Rated for 15,000 PSI working pressure

Booster line is 4 inch O.D. and is rated for 5.000 PSI working pressure.

The main 21 inch O.D. tube has .625 wall (5/8”)

These marine riser joints will be coated with a three coat epoxy and come with a complete set of data books.

All ready to go.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

------------------------------------------------------------------------------------------------------------
Search words(for official use only) :
New Vetco Style Marine Risers MR6-C for sale
Subsea Risers for Sale
Vetco Risers for sale
Marine risers for Sale
-----------------------------------------------------------------------------------------------------------

Worldrigs ID: WR1214

Vacuum Trucks for Sale
Vacuum Truck built on Western Star 4900 Series tri-axle tractor

Description
This custom vacuum truck is built on a 2006 Western Star 4900 Series tri-axle tractor.
The truck features a Detroit 60 Series 515Hp engine and an 18 speed transmission each
with 71,217Km of use, as well as an Airliner Air Ride suspension. The front axle is rated
at 20,000lb, outfitted with 445/65R22.5 tires with aluminum rims, and the three rear axles
at 23,000lb, outfitted with 11R24.5 tires with aluminum rims. The unit comes equipped with
a custom 19,193 litre tank and Hibon VTB-820 Blower.

Specifications
Component / Description
Engine : Detroit 60 Series 515Hp
Transmission : 18 Speed
Tank : 19,193L
Blower : Hibon VTB-820

Features
Custom Vacuum Tank
515HP Tri-Drive Tractor
Air Ride Suspension
Vtb-820 Blower

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

--------------------------------------------------------------------
Search words (for official use only) -
Vacuum trucks for Sale
Vacuum trucks - Detroit 60 Series 515Hp engine
Oilfield Drilling Vacuum trucks for Sale
--------------------------------------------------------------------

Worldrigs ID: WR657

Ingersoll-Rand TH60 Drilling Rig for Sale
Drilling Rig - Ingersoll-Rand TH60 - For Sale

Model : TH60 Drill Rig
Manufacturer : Ingersoll-Rand
Year : 1985
Condition : Used

Description :

1985 Ingersoll-Rand TH60 Drill Rig - S/N: 0838
Mounted on an International Paystar 5000 Truck - VIN #2HTTGDWT6FCA161151985
Detroit 8V71 diesel engine (6673+ hours)
IR 750 cfm / 250 psi Air Compressor (6857+ hours)
6 Rod Carousel
15 Drill Pipe (20ft x 4-1/2") included
128,081+ Miles on Truck
Hydraulic Leveling Jacks
Pipe Rack

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
1985 Built Ingersoll-Rand TH60 Drilling Rig for Sale
Ingersoll-Rand TH60 Drilling Rig - 1985 Built - For Sale
Used Ingersoll-Rand TH60 Drilling Rig for Sale
Ingersoll-Rand TH60 Drilling Rig for Sale in USA
Ingersoll-Rand Used Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR697

Freestanding Service rig for sale
450hp Single Freestanding Service Rig for Sale
New Single Freestanding Service Rig for Sale

Carrier :
• All welded, wide flange I-beam frame rails
• 24" wide drillers side folding steel walkways with handrails and toe guards
• Drillers side removable stairs with handrails
• Highway lighting package
• One man insulated cab with high back air ride bucket seat
• Tandem front steering axles are Meritor Easy Steer with Q Plus braking
• 20,000 lb front GAWR per axle

• Steering tires are 445/65R22.5
• Tridem rear drive axles are Meritor single-reduction with heavy duty Q Plus braking
• 25,000 lb rear GAWR per axle
• Drive tires are 11R22.5
• All axles are equipped with ABS
• Four hydraulic leveling jacks

• Work platform with folding wings on each side, removable handrails, and V-door
• 125G aluminum fuel tank
• 250G steel hydraulic tank
• One steel toolbox mounted on the carrier deck
• One 5,000 lb winch mounted on the drillers side
• Deadline anchor

Powertrain :
• Detroit Diesel, Caterpillar, or Cummins engine
• Exhaust system with spark arrestor
• Remote fuel filtration
• Air release fan hub
• Tu Flo 750 air compressor with air dryer
• 35GPM hydraulic pump
• Positive air shutdown
• Electornic control panel with diagnostics
• Allison HT750DB automatic transimission

Mast :
• 73'  stiff mast, 140,000 lb hook load
• Designed and built in accordance with API specification 4F
• Folding racking paltform complete with an escape frame assembly
• Four sheave crown
• Walk around crown platform and ladder
• Rod board with tie backs and safety cables
• Mast lighting package
• 2", 5,000psi standpipe
• Weight indicator mount

Drawworks :
• Alco 450 Double Drum, 450hp drawworks
• Main Drum
  - Main drum size 18 x 36
  - Brake rim size 42 x 10
  - Sand line capacity 53,000 lbs
• Sand Drum
  - Sand drum size 13 x 39
  - Brake rim size 38 x 8
  - Sand line capacity 10,000ft of 9/16 line
• Safety guards and shields

Optional Equipment :
• Tridem Steering configuration
• Class II accumulator system with pneumatic controls at drillers console
• Wind walls for tubing board
• Hoisting equipment and handling tools
• Raised drillers platform
• Upgraded transmission models

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------------------
Search words(for official use only) -
Freestanding Service Rig for Sale
450hp New Single Freestanding Service Rig for sale
New Single Freestanding Service Rig - 450hp
Land Rig for Sale - New 450hp Freestanding Service Rig
Workover Rigs for Sale
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR825

Driltech T25K5W Drill Rig for Sale
Used Drilling Rig 2007 Built for Sale

Model : T25K5W Drill Rig
Manufacturer : Driltech
Year : 2007
Condition : Used

Description :

2007 Driltech T25K5W Drill Rig,
Sullair 1000 cfm / 350 psi Air Compressor,
Cummins QSX15 (new ECM) Diesel Deck Engine,
Hammer Lubricator,
Water Injection Pump,
700' ft of 4-1/2" drill pipe & basic tooling included,
Side Pipe Rack,
4 Hydraulic Leveling Jacks,
Mounted on a Sterling Truck,
Mercedes Diesel Engine,
Eaton Fuller 8LL Speed Transmission,
Location : USA

Price & terms : Please enquire using the email form below.    

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

         

-----------------------------------------------------------------------------------------------------------------------------------
Search words(for official use only) :
Driltech T25K5W Drill Rig for Sale
Drilling Rig - Driltech T25K5W- for Sale
Used Driltech T25K5W drilling rig for Sale
2007 Built Drilling Rig for Sale  in USA
Used Drilling Rig - 2007 built Driltech T25K5W
Land Drilling Rig for Sale - 2007 built
Driltech Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------------------------------------

 

Worldrigs ID: WR774

Ingersoll-Rand 350 Crawler Air Drilling Rig for Sale
Drilling Rig - Ingersoll-Rand 350 Crawler - For Sale

Model : 350 Drill Rig - Crawler
Manufacturer : Ingersoll-Rand
Condition : Used

Ingersoll-Rand 350 Crawler Air Drill Rig
Updated system
Joy drifter
Note: Runs and drills but needs some oil leaks fixed

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Used Ingersoll-Rand 350 Crawler Air Drilling Rig for Sale
Ingersoll-Rand Crawler Air Drilling Rig for Sale
Ingersoll-Rand Used 350 Crawler Drilling Rig - For Sale
Ingersoll-Rand Crawler Air Drilling Rig for Sale in USA
Ingersoll-Rand Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR2058

Anchor Handling Tug Supply for Sale 
AHTS Vessel - 2010 Built - for Sale

Particulars
Vessel Type : Anchor Handling Tug Supply
Year Built : 2010
Classification : BV,Tug, supply vessel, fire fighting ship 1/anchor handling

Details
Length Overall : 50.00m
Breadth : 13.20m
GRT-NRT : 1092/327
Deadweight : 800 MT
Depth Moulded : 5.20m
Maximum draft : 4.50m
Clear deck Space : 250m²
Max Speed : 12.5kts
Economical speed : 11kts
Bollard Pull tonnes : 68.6T

Capacity
Fuel Oil : 590m³
Fresh Water : 215m³
Ballast Water : 150m³

Machinery
Main Engines : 2 x Caterpillar 3516B, each 2609
Gear Box : Suit CAT engine as above
Propeller :
BERG propulsion 2 controllable pitch propellers, KA-4 type, manganese bronze
Generators : 3 x 350kw Cummins 415V/3/50
Bow Thruster : 5 MT thrust, Kamewa thruster
Towing/Anchor : Double drum waterfall winch, each drum
Handling Winch : SWL 150T @ 6m/min, 1st layer.
Wire Ropes : Capacity: 2 x 56mm x 1250m long
In use :
1 x 58mm dia x 840m (towing wire)
1 x 56mm dia x 1250m (working wire)
1 x 56mm x 1000m (spare tow wire)

Shackles and Bridles : Assorted from SWL 50MT to 200MT
Tugger Winches : 2 x 10T @10m/min, brake holding 25 tons
Capstan : 1 x 5T @ 10m/min
Towing Pins : 200T SWL 2 Off
Shark Jaw : 200T, triplex shark jaw
Stern Roller : 4m x 1.5m
Electro-hydraulic telescopic deck crane : 10 ton @ 2m

Accommodation
Berths : 4x1, 3x2, 5x4
Total : 30

Fire Fighting
Class : 1
Monitors : 2
Capacity : 2400m³/hr capacity
Foam : 2000 ltrs foam tank
Oil Dispersant Oil dispersant boom P&S 

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) -
AHTS Vessel - 2010 Built - for Sale
50m Length AHTS Vessel for Sale
2010 Built Anchor Handling Tug Supply Vessel
AHTS Vessel for Sale
---------------------------------------------------------------------------------------------------------

Worldrigs ID: WR2024

Offshore Crane for Sale or Rental
2008 Built Deck Crane for Sale

Description :

This crane was manufactured in 2008 by U.S. manufacturer 
GoodCrane, Houston Texas for installation on offshore support 
vessel. Due to cancelled project, the crane was stored unused.
The crane have been upgraded after storage, and is offered as 
described below for sale or rental:

Main technical data :
Equipment / zone area : Electro hydraulic offshore crane / to be 
used in safe zone
Model : 65.62KSC11020 Knuckle boom

SWL all radius : 5 Ton Dynamic
Crane design standard : ABS guide for lifting appliances 2007 and API spec. 2C 6TH Ed
Pedestal  :
Included (1220 mm OD x 1,05 meter height
Optional pedestal installation with additional 2,25 meter height

Outreach max. / min. : 20 / 6 meter
Wire on winch : 1 1/8” dia x 90 meter
Main hook lifting speed : 45 m/min (at 5 Ton)
Slewing speed : 0 – 1 rpm

Slewing rotation : 360 degrees continuous
Main boom hydraulic cylinders : Dual with built in safety valve

Knuckle hydraulic cylinder : Single with built in safety valve
Hydraulic power unit : 100 HP, 690 Volt 3 phase 60 hz
Limit switch, overload protection Included

Digital load cell : Included with read out in cabin
Operators cabin : Included with operator seat, joystick 
controls, heater, etc.
Surface coating : Manufacturers offshore spec.
Crane and pedestal weight : Approx 25 Ton
Present location : Western coast of Norway

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------
Search words (for official use only) :
Electro Hydraulic Offshore Crane for Sale 
65.62KSC11020 Knuckle boom Crane for Rental Services
2008 Built Offshore Crane
Crane for Sale or Rental in Norway
Deck Crane - 2008 Built for Sale
-------------------------------------------------------------------------------------------------------------------

Worldrigs ID: WR534

Crane for Sale
J Frame ROV Handling Crane

Description
J frame ROV handling crane
Hydraulic power pack attached of dual electric 3phase 480 volt 50 HP with reservoir

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
----------------------------------------------------------------------------------------------
Search words(for official use only) -  
Crane for Sale
Crane for sale with Hydraulic power pack attached 
J frame ROV Handling Crane for sale
ROV Handling Crane for sale
---------------------------------------------------------------------------------------------

Worldrigs ID: WR1848

AHTS Vessel for Sale
AHTS - 2011 Built - for Sale

Description :

Type : AHTS
Dimensions : Loa: 63,7m
Class : Lloyds Register
Build : 2011 built
Accom / Pax : 30 passenger apart from crew
Machinery : M/E:5000 bhp

Deck : Clear Deck Area:415m2
Capacities : Bollard pull : 61T
Location : Middle East

Others : DP2, FIFI-1

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) -
Anchor Handling Tug Supply Vessel for Sale
AHTS Vessel for Sale
30 Passenger Capacity Vessel for Sale
Anchor Handling Tug Supply Vessel
AHTS Vessel - 2011 Built
---------------------------------------------------------------------------------------------------------