Equipment ID: 1490
Equipment name: Cameron 18 3/4 x 10k Subsea BOP stack and LMRP for Sale
Category: Blowout Preventers BOP

Specifications: Subsea BOP Stack with LMRP for Sale
Cameron 18 3/4 x 10k  Subsea Stack 

Description 

Cameron 18 3/4 x 10k  subsea stack and LMRP Complete

E.2. Primary BOP Stack (from bottom to top) : 
Stack complete with
Guide frame : Yes
Pick up attachment : Yes
Transport base : No
Size - bore : 18-3/4 in
Working pressure : 10,000 psi
H2S service : Yes

E.2.1.   Alternate  Hydraulic Connector :
Alternate connector available : Yes
Connector make/model : Cameron HA
Adaptor available : Yes

E.2.2.   Hydraulic Wellhead Connector :
Size (inches) : 18-3/4 in and 16-3/4 in
Make/Type : Vetco / H-4
Working pressure : 10,000 psi
Hot stab for underwater intervention : Yes
Spare connector same type : Yes

E.2.3.   Ram Type Preventers :
Preventers : 2 each
Quantity : 18-3/4 in
Bore size : 10,000 psi
Working pressure : Cameron
Make : U-II Double Cavity
Type - single/double : Double
Ram locks : Yes ( wedge lock )
Preventers connection type - top : API Hubbed
Preventers connection type - bottom : API Hubbed
Side outlets : Yes
Size (inches) : 3-1/16 in
Connection type
- Pipe rams : API Hubbed
Quantity  / Size
- Blind/shear rams : 1 set / 5 in Fixed
Quantity : 1 set
- Variable rams : 1 set
Quantity / Size Range : 2 sets / 3-1/2 in to 7-5/8 in

E.2.4. Stack Configuration (Blind/Shear/Pipe/Variable) :
Shear rams : Blind / Shear
Upper rams : 3 ½’’ x 7 5/8’’ VBR
Middle Rams : 3 ½’’ x 7 5/8’’ VBR
Lower rams : 5’’ Fixed
- Position of side outlets-kill
Upper : Between Upper and Lower Rams
Lower : Below Lower Rams
- Position of side outlets-choke
Upper : Between Shear and Upper Rams
Lower : Between Middle and Lower Rams

E.2.5. Annular  Type Preventer On Stack : None

E.2.6. Mandrel :
Make/Type : Vetco H-4
Size (inches)  : 18-3/4 in

E.2.7. Fail-Safe Hydraulic Valves (Choke & Kill) :
Make / Type : Cameron / MCS FLS 10K
Quantity on each side outlet  : 2
Useful capacity per accumulator - w/o pre charge : 11 gal
Bottle working pressure (psi) : 3,000 psi

E.2.9. Hydraulic Control  Pod/Receptacles :
Quantity : 2
Redundancy (%) : 100
Color coded : Yes
Remote regulation of operating pressure for functions requiring lower operating pressure : Yes
Spare control pod : Yes

E.3. Primary Lower Marine Riser Package (from bottom to top)

E.3.1. Hydraulic Connector :
Make/Type : Vetco / H-4
Size (inches) : 18-3/4 in
Working pressure : 10,000 psi
Hot stab for underwater intervention : Yes
Spare connector same type : Yes

E.3.2. Annular  Type Preventer (LMRP) :
Size : 18-3/4 in
Working pressure : 5,000 psi
Make/Type : Shaffer / SBOP dual annular

E.3.3 Flex Joint :
Make/Type : Oil-State / Model 2.0KSI
Size : 18-3/4 in
Working pressure : 5,000 psi

E.3.4.   Riser Adapter :
Make/Type : Vetco / MRC-6
Size (inches) : 21 in Outside Dia.

E.3.5.   Connection Lines to Riser :
Type (rigid loops, coflexip, etc) : Coflexip

E.4. Secondary BOP Stack : None

E.5. Secondary Lower Marine Riser Package : None

E.6. Primary Marine Riser System :

E.6.1. Marine Riser Joints :
Make/Model : Vetco / MR-6C
OD : 21 in
ID : 19- ¾ in
Wall thickness : 5/8 in
Average length of each joint : 50 ft
Quantity : 40
Pipe material : X-80
Minimum yield strength : 80 psi
Type riser connectors : MR-6C
Dogs : 6

E.6.2.Telescopic Joint :
Make/Type : None
Size - ID
Stroke
Double seals
Spare telescoping joint
Rotating support ring for riser tensioners / connection points

E.6.3. Kill/Choke Lines :
Quantity : 2
Outside diameter : 6 5/8’’
Inside diameter : 3 in
Working pressure : 10,000 psi

E.6.4. Booster  Lines :
Quantity : 1
Outside diameter (inches) : 4 -1/4 in
Inside diameter (inches) : 3 -3/4 in
Working pressure (psi) ; 3,000

E.6.5. Hydraulic Supply Lines : None

E.6.6.   Upper Ball (Flex) Joint :
Make/Type : Regan/DR-1
Size : 30 in
Maximum deflection (degree) : 12 deg
Spare upper ball (flex) joint : Yes

E.6.7. Buoyancy Modules (if fitted)
Quantity of buoyed riser joints : 18
Riser tube OD (inches) : 21 in  OD
Of buoyed riser joints (inches) : 44 in
Length of each module (ft) : 50 ft
Rated water depth (ft) : 3,000 ft

E.6.8. Marine Riser Spider :
Make/Type : None

E.6.9. Marine Riser Gimbal : None

E.6.10. Riser Handling Tools : None

This is the diverter type also

E.1   Diverter BOP :
   
Make/Type : Vetco VETCO/KFDS-3 Tenerife Spain R6000
Max bore size (inches) : 49-1/2 in
Working pressure (psi) : 3,000psi
Number of diverter outlets : 1
Outlet OD (inches) : 10 in
Insert packer size ID (inches) : Multiple onboard

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------
Search words(for official use only) :
Cameron Subsea BOP stack for sale
18 3/4 x 10k Subsea Stack and LMRP Complete
BOP stack With LMRP 
Subsea BOP stack for Sale
18 3/4 x 10k Blowout Preventer for Sale
------------------------------------------------------------------------------------------