Equipment name: Gardner Denver 1100 - 1500 hp Mechanical Drilliing Rig for Sale
Category: Land Rigs
Specifications:
Gardner Denver 1100 Drilling Rig for Sale If you cannot find the vessel, crane, rig or equipment that you need, We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed.
1500 HP Mechanical Drill Rig for Sale
Gardner Denver +/- 16,000' Drilling Rig
Description
Drawworks
Gardner-Denver 1100M Single Drum Drawworks. Rated To 1500 HP,
With 1-3/8” Lebus Grooved Drum, Serial #DW1162-1. Three Engine
Sectional Compound, Driven By Three (3) 3412 Cat Engines. Each
Rated @ 725HP/2000RPM. Drawworks Equipped With Parkersburg
V-200 Hydro-Matic Auxiliary Brake. Kelco Make-up and Break-out Catheads.
Mast
Skytop Brewster 142’ x 1,000,000# SHL Capacity, 25’ Leg Spread.
Serial #78-111. Racking Board with A Full Setback Of 255 Stands
of 4-1/2” Drill Pipe. Crown Block 7 x 60”. Twelve Line Capability.
Mast Weight Is 116,095#.
Substructure
Ideco 21’ High Step-down Box on Box. Modified To Meet API 4F-RP4G
Category 4 Specs. Rated to 1,000,000# And A Setback Capacity of
700,000#. Serial #78-1111
Block/Hook
Ideco UTB 525 Six (6) 1-3/8” Sheaves. 525 Ton Block/Hook
Combination. Serial # 94.
Gardner-Denver 27-1/2” x 53” Rotary Table. Serial #328. Chain
Driven From Drawworks.
Continental-Emsco LB-500 Swivel. Serial #58. With Spare
Quick-Change Packing.
Pumps
Two (2) 3NB1300 (Chinese) Tri-plex Pumps, 1300 HP. Both Pumps
Have The Same Serial #20060115. Both Pumps Equiped With Pulsation
Dampeners And Pop-Off Valves. Pump #1 Is Charged By A 6” x 8”
Centrifugal Pump Powered By A 40HP Electric Motor. Pump #2 Is Charged
By A 50HP Electric Motor. Both Pumps Are Each Belt Driven By A D-399
Catipillar Engine, Rated @ 1,225HP.
Mud Pits
Three (3) Pits, 1,500 Barrel Capacity. Within The Pits There Are Sand
Traps, Settling Pit, And Two 60 Barrel Spot/Slugging Tanks. Pits Also
Equiped With Eleven (11) Derrick 10HP, KF87AM215 Horizontal Mud
Agitators. Two (2) 6” x 8” Centrifugal Mixing Pumps, Both Diven By
75HP Electric Motors. Three (3) 6” x 8” Centrifugal Desander/Desilter/Degasser
Pumps, All Driven By 75HP Electric Motors. Pits Also Have Covers.
Shaker
One (1) Derrick Dual FLC-503/High ‘G’ Shaker. Serial # MAH008442. Two
(2) 25HP Motors On Each Shaker. Derrick Model #SGX-34-18-460/480 6-001.
1800RPM. Serial #SG-5816, #SG-5817, #SG-5818, #SG-5819
Mud Cleaner
One (1) Derrick FLC-503/High ‘G’ (2-16) Desander/Desilter/ Mud Cleaner.
Serial #MAH008914. Two (2) 25HP Motors, Derrick Model #SGX-34-18-460/480 6-001.
1800RPM. Serial #SG-5955, #SG-5956, Two (2) 10” Desanding Cones (1200gpm).
Sixteen (16) 4” Desilting Cones (1280gpm) Desander Serial #AD002570.
Desilter Serial #AD002477.
Degasser
One (1) Derrick VACU-FLO 1200 Degasser Serial #DG000375.
One (1) 10’W x 10’H x 56’L Combination Office/Living Quarters
Top House With Lockers And Knowledge Box. BOP Remote Sta.
Tool/Change House Combination. 8’W x 9’H x 38’ Long. Lockers
One (1) 10’W x 7’H x 34’L w/Two (2) 1.25” x .75” Transfer
One (1) 7’8”W x 6’H x 30’L Tank w/Three (3) 5” x 6” CentriFugal
One (1) 10’W x 9’H x 50’L Generator House. Housing Two
One (1) 8’W x 3’H x 34’L Rig Basket For Hauling Handling Tools.
C.P.C. Six (6) Station BOP Contol Unit w/Rig Floor Remote.
Five Star Model 092X20000 Surveyor.
Serial #2-12-06. Unit
Hydraulic Unit
One (1) Nova HPU-S40 Hydraulic Power Unit, (Furnished By
Kelly Spinner
Foster Hydraulic Kelly Spinner. Serial #77 L 101.
Spinmaster Model 950, Serial #SPARE 3408. (Furnished By Lamb Services, Inc.).
#1 Caterpillar 3412 Serial #81204255, SR4 500KW Generator Serial #SNA04870.
#2 Caterpillar 3412 Serial #38S3510, SR4 500KW Generator Serial #58BH4388T.
Mud Agitators
Eleven (11) Derrick Model #KF87AM215
Mud Agitator Motors
Eleven (11) Baldor #BV375232, Cat. #60C RISE, 10HP
Air Hoist
Two (2) Ingersoll Rand Air Hoist. #1 Ingersoll Rand Model #FA5A-24MX1G
Serial #MW004968. Rated To 10K. #2 Ingersoll Rand Model #HUL-40
Serial #AA910953CM. Rated To 4K.
Charging Pumps
Centrifugal Pump. Serial #11769.
Frame, 230/460V, 1775RPM Electric Motor. Serial #C0603080044.
Centrifugal Pump. Serial #11231.
Frame, 230/460V, 1775RPM Electric Motor. Serial #C0601240153.
Mixing Pumps
Serial #11193. Powered By A Baldor #BV790473, Cat.#M7068T-1, 75HP,
365T Frame, 230/460V, 1780RPM Electric Motor. Serial #C0601230194.
#2 MCM 6” x 8” Series 250, RH, With A 10.5” Impeller, Centrifugal Pump.
Serial #11192. Powered By A Baldor #BV887364, Cat. #70668T-1, 75HP,
365T Frame, 230/460V, 1780RPM Electric Motor. Serial #C0601270204.
Desander / Desilter / Degasser Pumps
Centrifugal Pump. Serial #14116. Note: Original Pump Was Serial #11195.
It Was Sent To Crown Yard, 2/27/07.
Powered By A Baldor #BV790476, Cat. #M7068T-1, 75HP, 365T Frame,
230/460V, 1780RPM Electric Motor. Serial #C0601230179.
Serial #11202.
Powered By A Baldor #BV790179, Cat. #M7068T-1,
75HP, 365T Frame, 230/460V, 1780RPM Electric Motor. Serial #C0601100179.
Serial #11196.
365T Frame, 230/460V, 1780RPM Electric Motor. Serial #C0601270199.
Air Compressors
Two (2) Curtis Model RS-40 A/E E-12+ Air Compressors, Rated At 150CFM
At 150PSI. Serial #s #1 7683F06001 #2 7683F06001 Both Are Driven By
Baldor Cat. #M2538T, 40HP, 286TS Frame Electric Motors.
Serial #s: #1 Z0603140176, #2 Z0603140171
473 Joints 5” S-135 19.5# Drill Pipe W/4-1/2”IF Connections, 22 Joints 5”
Spiral Wieght Drill Pipe W/4-1/2”IF Connections, 11 Joints 6-1/2” Drill Collars
W/4-1/2”XH Connections. 3 Joints 8” Drill Collars W/6-5/8”REG Connections.
1 5-1/4” Hex Kelly W/ 4-1/2”XH Pin.
1ea. Double Pin X-Over Sub For Top Of Kelly 7-5/8”REG LH x 6-5/8”REGLH.
Serial #55755-1. 2ea. Upper Kelly Valves. 6-5/8”REG LH Box x Pin. 10M.
Serial #s DM-4866. DM-4867. 2ea. Lower Kelly Valves. 4-1/2”IF Connections.
10M Serial #s DM-4868. DM-4869. 2ea. Inside BOP Valves. 4-1/2”IF Connections.
10M Serial #s GM-19348. GM-20014. 8ea. Lift Subs, 4-1/2”XH W/5” Shanks. 3ea.
Lift Subs. 6-5/8”REG. W/5” Shanks. 6ea. 6-1/2”OD Burn Subs, 4-1/2”IF Pin x Box
Connections. 2-13/16”ID. Serial #s 55611-1 thru 55611-6. 2ea. 6-1/2”OD Bit Subs,
4-1/2”XH Box x 4-1/2”REG Box (BFF). Serial #s 55611-7 & 55611-8. 2ea. 8”OD Bit
Subs, 4-1/2”XH Box x 6-5/8”REG Box (BFF) 6-1/2” Bottle Neck. Serial #s 55611-9 &
55611-10. 2ea. 8”OD Bit Subs, 6-5/8”REG Box x 6-5/8”REG Box (BFF) Serial #s
55611-11 & 55611-12. 2ea. 6-1/2” Kelly Extension Subs, 4-1/2”IF Connections.
2-13/16”ID. Serial #s 55611-13 & 55611-14. 6ea. 6-1/2”OD Crossover Subs,
4-1/2”IF Box x 4-1/2”XH Pin. 2-13/16”ID. Serial #s 55611-15 thru 55611-20.
1ea. 8”OD x 6-1/2” Bottleneck Crossover Sub, 4-1/2”XH Box X 6-5/8”REG Pin.
Serial # FHC-1030. 1ea. 4-1/2”IF Pin x 2” 1502 Pump-in Sub.
Misc
2ea. Master Bushings For Gardner-Denver 27-1/2” Rotary. One Pin Drive
and One Combination Pin/Sq. Drive. 2ea. Kelly Drive Bushings. Pin Drive.
2ea. Type DB Drill Pipe Tongs. 2ea. Type HT-100 Drill Pipe Tongs. 2ea.
Varco SDXL 5” Drill Pipe Slips. 2ea. Varco Drill Collar Slips. 1ea. Oteco
Mud Bucket. 2ea. Web Wilson 5” 18º Taper Drill Pipe Elevators. 2ea.
Type ‘C’, 3-1/2”-10-3/4” Safety Clamps.
4-1/16” 10M x 3-1/16” 10M Choke Manifold. Manifold Was Re-Built By Doyles
Valves, Corpus Christi, TX
Price & terms : Please enquire using the email form below.
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.
---------------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Gardner Denver 1500 HP Mechanical Drill Rig for Sale
Gardner Denver 1100 Rig for Sale in USA
Mechanical Drill Rig for Sale
1500 HP Mechanical Drill Rig for Sale in USA
+/- 16,000 feet Drilling Depth Rig
Mechanical Land Drilling Rig
Gardner Denver 1100 16,000' Drilling Rig
---------------------------------------------------------------------------------------------------------------
Select equipment to compare...