Specifications:
National 1320 SCR Drilling Rig for Sale Description Mast & Sub : Drawworks : Rotary : Traveling Block : Swivel : Triplex Mud Pumps : Generators Diesel / AC : SCR House : Fuel Tank : Water Tanks : Shale Tank : Mud Trip Tank : Intermediate Tank : Suction Tank : Desilter / Desander / Shaker : Blow Out Prevetion Equipment : Annular Preventer : RAM Preventer : Choke Manifold : Auxiliary Equipment : (18) 8” Slick Drill Collars Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. ---------------------------------------------------------------------------------------------------------------
2000hp Land Drilling Rig for Sale
SCR Drilling Rig for Sale
Lee C. Moore, 142’ High Cantilever Type Mast, S/N: T3839 with Cantilever
Substructure, S/N: 54H048, 36’W X 25’H X 75’L, 1,000,000 LBS Gross Nominal
Capacity with 12 lines. Setback capacity 500,000 lbs. and 800,000 lbs.
complete with Racking Board Platform. Drillers and Off-Drillers Side Top Dog,
Drillers’ lockers, storage boxes and knowledge box, catwalks with (12) Pipe Racks
National 1320 UE, 2,000 HP, 1-3/8” Lebus Grooved Drum Draw Works with
(2) GE-752, 1,000 HP DC Traction Motors, complete with National Make-up
and Break-out Catheads, Over-running clutch, air drillers console and
Baylor Elmagco Model 7838 Electric Brake, S/N: 7299.
National C-275 27-1/2” Rotary Table with Independent Drive, with
(1) GE-752,1,000 HP DC Traction Motors, complete with emergency
mechanical independent drive.
National, Model 660-G500 (Integrated), 500 Ton Capacity with (6) 60” Sheaves, 1-3/8” Line.
National Model P500, 500 TON Swivel
(2) Gardner-Denver PZ-11, 1,600 HP Triplex Pumps, each with (2) GE-752, 1,000 HP DC
Traction Motors, (1) Hydril Model K-20-5000 Pulsation Dampener and
(1) 6 x 5, 70 HP centrifugal charge pump
(3) Caterpillar 3512C, 1,476 BHP (1101 BKW) @ 1200 RPM, 2006 EPA/CARB
Non-Road Mobile Tier 2 Emission & IMO certified, each with KATO 6P6-3300
Generator, Rated: 1365 EKW, 1950 KVA, 0.7 PF, 600 Volt, 3 Phase,
GT #3681H MBRadiator, Silencer MSA-1 Muffler with Spark Arrest,
(2) Sullivan Palatek Model 30DG 30HP Electric Air Compressors, radiators,
horizontal receiver tanks and (1) LEROI Model 770 cold start compressor,
diesel powered
ROSS HILL, Model 1650, S/N: 5244 with (4) bays, 1800 AMP Capacity, 750
Volts DC, with AC Buss, including (1) General Electric 770 Line Motor Control Center,
Model 434X162003, 480 Volts, 3 Phase, 60 HZ., mounted in a
10’H x 10’W x 30’L Temperature Controlled House.
(1) 330 bbl. 8’ Dia. Fuel Tank with (2) 1-1/2”, 3 HP Fuel Transfer Pumps; and
(1) 300 BBL Fuel Tank
(1) 570 bbl Open Top Tank and (1) 150 bbl. with 11’ Skid Extension with
(2) 4 x 3 30 HP Centrifugal Pumps
600 bbl. Flat Bottom Tank, Internal Plumbing, Mud Jets, (2) 10 HP Agitators,
Covered Porch with (2) 6 x 5, 60 HP Centrifugal Pumps
150 bbl. Flat Bottom Trip Tank with 7’L Porch and (2) 4 x 3, 30 HP
Centrifugal Pumps
500 bbl. Flat Bottom Tank, (3) Compartment Tank, Internal
Plumbing, Mud Jets with (3) 10 HP Mud Agitators
425 bbl. Flat Bottom, (1) Compartment Tank, Internal Plumbing, Mud Jets,
(3) 10 HP Mud Agitators with Covered Porch with (2) 6 x 5, 60 HP Centrifugal Pumps
DG-ATM NOV Atmospheric Degasser with 10 HP
Pump, Brandt Desilter with (16) 4” Cones, Brandt Desander with (2) 12” Cones,
and (2) Brandt COBRA Shale Shakers
Closing Unit: Cameron, Six (6) Station, 120 Gallon Capacity
HYDRIL Type GK - 13-5/8” X 5,000 psi
Cameron Type U, 13-5/8” x 10,000 psi Double Ram Preventer
Cameron Type U, 13-5/8” x 10,000 psi Single Ram Preventer
Drilling Spool, 13-5/8” with 4-1/16” Hydraulic Gate Valve, 2-1/16” and
4-1/16” Outlets, (2) 21/16” Gate Valves, and (1) 4-1/16” Gate Valve.
10,000 PSI with (8) 4-1/16” X 10,000 PSI Gate Valves mounted on an
adjustable height skid
- (25) 6-3/4” O.D. x 2-1/4” I.D Slick Drill Collars
- 500 Joints, 5” 19.50#, S-135 Drill Pipe with Hard Band
- Compressor House with grasshopper
- Mud House
- Tool House
- Change House
- Parts House
- Junk Box
- (2) Ingersoll-Rand Model K6U Air Hoists
- Inter-American Model Surveyor with 15,000’ Wire Line
- 5-1/4” Hex X 42’L Kelly
- Kelly Drive Bushing
- Kelly Spinner
- Upper Kelly Valve
- Lower Kelly Valve, 5,000 psi
- National Model D Dead Line Anchor
- Pipe Spinner
- Steel Framed Rig Mats
- Electrical Suitcases
- Rig Manager Quarter
- 12 Person Crew Quarter
Price : US$ 8,500,000
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.
Search words (for official use only) :
National 1320 Drilling Rig for Sale
National SCR Drilling Rig
2000 hp Land Drilling in USA
National 1320 Land Drilling Rig for Sale
SCR Drill Rig for Sale in USA
National 1320 2000 HP Drilling Rig
---------------------------------------------------------------------------------------------------------------
Select equipment to compare...