UMD 125 New Land Drilling Rig - For Sale - Worldoils Oil, gas and offshore equipment marketplace

UMD 125 New Land Drilling Rig - For Sale

Equipment ID: 594
Equipment name: UMD 125 New Land Drilling Rig - For Sale
Category: Land Rigs
Sub Category: Land Rigs
Specifications: UMD 125 Land Drilling Rig - For Sale in Europe
New Semi Mobile Drilling Rig For Sale - UMD 125

Main Technical Specifications
Engine type : C 15 ACERT
Nominal engine power hp (kW) : 475 (354)
Transmission : Allison 4700 OFS
Nominal hoisting capacity metric ton (lbs) : 125 (275000)
Workover depht (m) drill pipe (2 7/8”) : 5100
Drilling depht (m) (4 1/2“) : 1700
Rope diameter (mm) : 26
Mast height (m) : 32
Drilling floor height (m) : 5
Travelling system : 5x4
Working pressure (mpa) : 0, 65-0, 8

Technical Specifications
Drawworks
Main Drum -
Input power (hp) : 500
Barrel size : D18” W38”
Brake rim size : D44” W12”
Wire line size : 1 ” (26 mm)
Drum speed : 7F/1R
Lubrication : Automatic or manual
Drum clutch : Air flex type
Brake cooling : Water circulation
Brake system : Band / disc / auxiliary (Parmac SSR-28 hydro-brake)
Chain drives : All chains are fully encloded for oil bath lubrication ensuring
longer life and cleaner operation

Sand Line Drum -
Barrel size : D13” W37“
Brake rim size : D44” W9½”
Spooling capacity : 16114’
Sand line wire size : 9/16” (14 mm) - 5/8” (16 mm)

Rig Power & Transmission
Diesel engine(s) : Caterpillar C-15 ACERT, 540Hp, 2.100rpm
Transmission(s) : Allison OFS 4700 series with torque converter
Right angle gear box : Min 500 HP gear box in oil bath gear case
Compound box : Twin engine drive through transmission includes disconnect clutches
at compound shaft for engines

Mast & Crown Block
Mast -
Mast complete set : Design and conform to APÄ° 4F specification
Mast height : 32m ( 105ft )
Max. static hook load capacity : 1.225kN ( 275.000lbs )
Racking capacity : 1.700m ( 4 ½’’ DP19.2m double )
Mast type : Hydraulic telescopic
Height of the monkey board : 17.2m ( from floor )
Accessories : Two (2) X hydraulic catheads , Two (2) X tong weight boxes ,
standpipe , exproof lightning....etc

Crown Block -
Crown block complete set - Design and conform to APÄ° 4F specification
Max. hook load - 1.225kN (275.000lbs)
Number of sheaves - (3) Main + (1) fast line + (1) deadline + (1) sandline +
(2) sheaves for service winch

Sheaves OD :
Fast Lines Ø32" ( Ø813mm )
Dead Line Ø28" ( Ø711mm )
Sand Line Ø28" ( Ø711mm )

Dia. of sheave’s grove :
Fast & Dead Lines Ø1" ( Ø26mm )
Sand & Winch Lines Ø 5/8" ( Ø16mm )

Substructure
Substructure complete set : Design and conform to APÄ° 4F specification
Height of substructure substructure : 5m
Area of substructure : 40m2
Max. static rotary load : 1.400kN
Set back capacity : 700kN
BOP lifting tools : 3tons capacity electric or mechanic winches
Accessories : Mouse, rat hole, dog house

Rotary Table
Diameter of Opening : 20½"
Center of Table to Centerline of Sprocket Teeth : 44"
Maximum Static Load, ton : 350
Max Speed, rpm : 300
Gear Ratio : 3.79
Dimensions (LxWxH), in : 78×56×24
Approximate Weight, lbs : 12,020

Traveling Block & Hook
Traveling block : 1.225kN Max. statik load, 4 sheaves, Ø32’’ sheaves dia. Ø1’’
(Ø26mm ) groove dia.
Hook : 1.225kN Max. statik load, 5tons spring stroke.
Elevator link(s) : 1.225kN rated load capacity.

Swivel
Static hook load, ton : 125
Working pressure, psi : 5,000
Maximum speed, rpm : 300
Coupling thread to stem : 4-1/2" Reg LH
Coupling thread to kelly : 6-5/8" Reg LH
Stem Ä°.D. : 2- 1/2"

Trailer & Other Systems
Trailer :
Three axles semi mobile trailer, 16 wheels, fabricated high tensile steel vehicle
frame reinforced at points of greatest stress. Highway equipment and cab
included. Installed fuel tank. Tool box. Auxilary drill line drum, all axles dressed
brake, folding walkways on both sides of trailer.

Hydraulic jacks : Four hydraulic operated leveling jacks
Hydraulic service winch : 5 metric tons drum pull capacity
Deadline anchor : Deadline anchor attached directly to trailer frame
Air system : Compressor (engine drive), air tank, relief valves, air dryer, gauges, all clutches

Hydraulic system :
Hydraulic pump, system operate hydraulic cylinders on mast, hydraulic jacks,
hydraulic pipe tong, and hyraulic winch. Control valves, hydraulic oil tank, filters,
pipes, hydraulic and air valve connections, fittings.

Electrical lighting system : All the electrical equipments on the mast, and substructure
are ex-proof type

Instrumentation : Driller control panel, weight indicator, gauges, air valves, cables, hoses,
fittings, transducers, paint

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------
Search words(for official use only) :
UMD 125 Drilling Rig For Sale in Europe
New UMD 125 Semi Mobile Drilling Rig For Sale
New Semi Mobile Drilling Rigs
Land Drilling Rigs For Sale
New Land Drilling Rig
--------------------------------------------------------------------------

Worldoils Oil, Gas and Offshore Marketplace - UMD 125 New Land Drilling Rig - For Sale

Images

New UMD 125 Land Drilling Rig - For Sale

Send an email to Worldoils

Note: Fields marked by (*) are mandatory.
Email to:
For equipment:
Category:
Your name:	*
Your company:	*
Your email address:	*
Your phone no.:	*
Your message:	*

The information contained herein is believed to be accurate but has not been verified. This equipment is subject to prior sale and sold “where-is as-is” with no warranties from Worldoils Pte Ltd or the Seller expressed or implied.