Worldrigs ID: WR1029

Ingersoll-Rand TH60 Long Tower Drilling Rig for Sale
Drilling Rig - Ingersoll-Rand TH60 Long Tower - For Sale

Model : TH60 Long Tower Drill Rig
Manufacturer : Ingersoll-Rand
Year : 1979
Condition : Used

Description :

1979 Ingersoll-Rand TH60 Long Tower Drill Rig
Mounted on a 1979 International Paystar 5000 truck
1,408 Hours on Engine and Compressor (Since Rebuilt)
Power by a Detroit 8V92T Diesel Engine
IR 750 cfm / 350 psi Air Compressor
2-cylinder Bean Water Injection Pump
7-Rod Carousel with (20ft x 4-1/2") & 20 Rods Included
6" Hammer & Stabilizer & Basic Tooling Included
Gearmatic winch & Sand Line
3-Leveling Jacks
Note : "Divertor NOT Included" &
Several Rear Tires Need Replaced

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Ingersoll-Rand TH60 Long Tower Drilling Rig 1979 Built for Sale
1979 Built Ingersoll-Rand TH60 Long Tower Drilling Rig for Sale
Used Ingersoll-Rand TH60 Long Tower Drilling Rig for Sale
Ingersoll-Rand TH60 Long Tower Used Land Drilling Rig for Sale
Ingersoll-Rand TH60 Long Tower Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR357

Driltech D40K Drilling Rig for Sale
1977 Built Driltech D40K Drilling Rig for Sale

Model : D40K Drill Rig
Manufacturer : Driltech
Year : 1977
Condition : Used

Description :

1977 Driltech D40K Drill Rig
Sullair 750 cfm / 350 psi Air Compressor (unknown hours)
CAT 3406B Diesel Deck Engine - rated 400 HP (Rebuilt 600 hours since)
Dual Carousels
Includes 300ft of 4.5" X 25ft Drill Pipe and Tooling
Mounted on a CCC (Crane Carrier Company) Truck
Cummins NTC 350 Diesel Engine
Note: New White color paint job completed in July 2024

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Drilling Rig - Driltech D40K - For Sale
Used Driltech D40K Drilling Rig for Sale
Driltech D40K Drilling Rig - 1977 Built for Sale
Driltech D40K Used Land Drilling Rig for Sale
Driltech D40K Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR2993

Geoprobe 54DT Soil Sample Drilling Rig for Sale
Drilling Rig - Geoprobe 54DT Soil Sample - For Sale

Model : 54DT Soil Sample Drill Rig
Manufacturer : Geoprobe
Year : 2002
Condition : Used

Description :

2002 Geoprobe 54DT Soil Sample Drilling Rig - S/N: 7211T54
Track Mounted
Powered By a 4-Cylinder Kubota Diesel Engine
Used Rods And Bits Included
According To The Previous Owner: Geoprobe Rebuilt 1,213 Hours Ago
Rated for drilling to around 30 ft depth with 2.25” diameters tooling
54” stroke (normally runs 4 ft drill rod)
Width = 48" inches
Folded Height = 65" inches
Unfolded mast height = 123" inches
Length = 92" inches
Weight = 3700 lbs
Torque = 609 ft lb
Pulling power = 27,000 lbs
Reliable GH41 Soil Probing Hammer
Rear stabilization outriggers
Good operating drill when tested last

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
2002 Built Geoprobe 54DT Soil Sample Drilling Rig for Sale
Geoprobe 54DT Soil Sample Drilling Rig - 2002 Built for Sale
Used Geoprobe 54DT Soil Sample Drilling Rig for Sale
Geoprobe 54DT Soil Sample Used Drilling Rig for Sale
Geoprobe 54DT Soil Sample Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR2736

Schramm T64HB Drilling Rig for Sale
Drilling Rig - Schramm T64HB - For Sale

Model : T64HB Drill Rig - Retrofitted
Manufacturer : Schramm
Condition : Used

Description :

Schramm T64HB Drill Rig (Retrofitted in the early 1990s)
LeROI 600 CFM /350 PSI twin screw air compressor & Cooler
Detroit 8V71 NA Deck Engine (newer coolant pump) & Cooler
Mounted on 1978 GMC Truck
10 speed transmission
Includes a Newer Bean Water Injection Pump in a box (needs to be installed)
Main hydraulic pump (rebuilt with less than 10 hours)
Detroit 6V53 NA Diesel Engine
Hydraulic Leveling Jacks
Also piped for mud drilling & no tooling (cost extra)
Note: Rotation gearbox needs the pinion gear sockets remachined.
Top head needs to be rebuilt and motors replaced. No hammer lubricator.
Has Clean Title.

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Used Schramm T64HB Drilling Rig for Sale
Schramm T64HB Used Drilling Rig for Sale
Schramm Used Drilling Rig for Sale
Schramm T64HB Land Drilling Rig for Sale
Schramm T64HB Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR1003

Canterra CT250 Torquemaster Series Monitoring Rig for Sale
Drilling Rig - Canterra CT250 Torquemaster Series - For Sale

Model : CT250 Torquemaster Series Monitoring Drill Rig
Manufacturer : Canterra
Year : 1991
Condition : Used

Description :

1991 Canterra CT250 Torquemaster Series Monitoring Drill Rig
- S/N: C7250-00054
Set up for water well & geotech drilling for auger & coring
10,000 Ft-Lb Rotary Torque
Stepless Rotary Speed, 0-175 Rpm
Gear Driven Rotary, Instantly Reversible
18,500 Pounds Pullback, 0·90 Fpm
18,500 Pounds Pulldown, 0-90 Fpm
Long 23ft Foot Stroke, Chain Feed
Cummins Diesel Engine On Deck
Triple Stage Engine Air Filtration
High Capacity Hydraulic Oii Cooler
All Functions Hydraulically Operated
Variable Speed
Integrated Hydraulic Control Manifold
Top Drive Swings Off Hole Vertically
Failsafe Hydraulic Winch
Breakout Table And Hydraulic Wrench
Coring Speed Shift Range 1-710 Rpm
Water Well Rotary Head, 3150 Ft-lb / 0-115 Rpm
Sandline Wich
Auto Sample Spudder
Two Inch Circulating Plumbing
Two Inch Swivel For Mud
Air Or Foam Drilling
3x4 Centrifugal Mud Pump
Moyno Pump
200 Cfm Developmental Air Compressor
Jib Winch For Handling Augers, Rods, Tools
Single Rod Loader For Adding Rods
Rod Spinner
Powered Breakout Table
Cathead - Hydraulic Powered
Wagtail, Slid Base
Auger Guides
Suitable For Dth Hammer
Rock Drilling With Auxiliary Air Compressor
Lubrication For Downhole Hammers
4 Leveling Jacks
Auger Rack
Coring Spudder Etc. Are Included But Not Currently Mounted On Drill
As Previous Operator Was Using For Mud Rotary And Air Rotary Drilling
Rated To Drill Up To 8" Diameter Holes To 500 Ft. Depth
Can Also Run Hollow Stem Augers To 180 Ft
Core Drill To 80-0 Ft
Nearly $50,000 Worth Of Repairs And Upgrades Completed In 2022 Through 2023
Including 1 New Hydraulic Pump And 1 Reman Hydraulic Pump
Comes With 400 Feet Of 3-1/2 Inch Od By 20 Foot Drill Pipe
Mounted On 1991 International 4800 Series Truck
4x4 (4-Wheel Wheel Drive)

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
1991 Built Canterra CT250 Torquemaster Series Monitoring Rig for Sale
Canterra CT250 Torquemaster Series Monitoring Drilling Rig - 1991 Built
Used Canterra CT250 Torquemaster Series Monitoring Rig for Sale
Canterra CT250 Torquemaster Series Monitoring Used Rig for Sale
Canterra CT250 Torquemaster Series Monitoring Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR2813

Gardner Denver 1500 Drilling Rig for Sale
Gardner Denver 1500 Drilling Rig - 1978 Built - For Sale

Model : 1500 Drill Rig
Manufacturer : Gardner Denver
Year : 1978
Condition : Used

Description :

1978 Gardner Denver 1500 Drill Rig :
Mounted on a 1990 International Truck
Cummins Diesel Engine
W B J Air Compressor - 2 Stage
3 Leveling Jacks
Bean Water Injection Pump
Hydraulic Oil Cooler
8" Rotary Table
Set Up With A 5X6 Mud Pump
35 ft To 40 ft Derrick
52 Meters of used Drill Pipe & 2 Collar Pipes
Spare Parts For 5 X 6 Mud Pump

Location : Western Africa

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Drilling Rig - Gardner Denver 1500 for Sale
1978 Built Gardner Denver 1500 Drilling Rig for Sale
Used Gardner Denver 1500 Drilling Rig for Sale
Gardner Denver 1500 Used Land Drilling Rig for Sale
Gardner Denver 1500 Drilling Rig for Sale in Western Africa
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR557

Ingersoll-Rand TH60 Drilling Rig for Sale
Drilling Rig - Ingersoll-Rand TH60 - For Sale

Model : TH60 Drill Rig
Manufacturer : Ingersoll-Rand
Condition : Used

Description :

Ingersoll-Rand TH60 Drill Rig
Mounted on a 1999 Paystar 5000 International Truck
CAT C12 Diesel Engine
TH60 was completely rebuilt in 2011
500 cfm / 250 psi Air Compressor
3-inch Rod Carousel with 250 feet of Drill Rods
Winch
Dust Control System
Water Injection Pump
Enclosed Operator Cab
Drill and Engine 4925 hours

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Used Ingersoll-Rand TH60 Drilling Rig for Sale
Ingersoll-Rand TH60 Drilling Rig - 2011 Rebuilt for Sale
Ingersoll-Rand TH60 Used Drilling Rig for Sale
2011 Rebuilt Ingersoll-Rand TH60 Drilling Rig for Sale
Ingersoll-Rand TH60 Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR1449

Mobile B-61 HDX Drilling Rig for Sale
Mobile B-61 HDX Drilling Rig - 1991 Built - For Sale

Model : B-61 HDX Drill Rig
Manufacturer : Mobile
Year : 1991
Condition : Used

Description :

1991 Mobile B-61 HDX Drill Rig - S/N: 91009
PULLMASTER Main & RKI Secondary Winches
30ft H Hydraulic Raised Stiff Mast
Integrated Table
Hydraulic Tong Assembly
2005 CUMMINS 3.9L Diesel Engine
HPU
MOYNA Hydraulic Water Injection Pump
Water Tank
Drilling Capacities :
Rotary Drilling with 2-5/8” diameter drill rod…… 1350 ft. (410 m).
= we can provide new drill pipe like this at additional cost
approximately $250 USD per 5 ft. stick.
Core Drilling with AW size tools or AQ wire line… 2250 ft. (685 m).
Core Drilling with NW size tools or NQ wire line… 1350 ft. (410 m).
Continuous Flight-Auger Diameter Range…... up to 14” (355 mm).
Max. Depth w/ 6” Dia. (152.4 mm) Augers…………………………….. 360 ft. (110 m).
Max. Depth w/ 8” Dia. (203.2 mm) Augers…………………………….. 250 ft. (76.2m).
Note: Drilling Capacities are based on maximum depths obtained in
actual field test and will vary with local subsurface conditions.
IHC 6-Cyliner Diesel Engine
EATON 8-Speed Transmission
(3) Hydraulic Leveling Jacks
10.00R20 Front & 11R22.5 Rear Tires & 210" WB
Dayton Wheels (75,751 Odometer Miles)
Note: If you are wanting to do direct rotary drilling with drill pipe
and roller cone bit or DTH hammer then you will need an add auxiliary
mud pump or auxiliary air compressor. If you do not have mud pump or
compressor then we do have some options in stock we can offer at
additional costs :
Ingersoll-Rand 400 CFM / 200 PSI air compressor, enclosed, trailer mounted.
Ingersoll-Rand 600 CFM / 125 PSI air compressor, enclosed, trailer mounted.
Ingersoll-Rand 750 CFM / 300 PSI Air Compressor mounted on 1996 Volvo
truck p/b Cat 3406E.
Sullair 900 CFM / 350 PSI air compressor, enclosed, skid mounted.
Gardner Denver FXFF 4 x 5 Duplex mud pump p/b CAT 3304, skid mounted.
Gardner Denver FXF 4 x 5 Duplex mud pump p/b Waukesha 4-cylinder diesel
engine, skid mounted.

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Drilling Rig - Mobile B-61 HDX - for Sale
1991 Built Mobile B-61 HDX Drilling Rig for Sale
Used Mobile B-61 HDX Drilling Rig for Sale
Mobile B-61 HDX Used Land Drilling Rig for Sale
Mobile B-61 HDX Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR2572

Mobile B61 HDX Drilling Rig for Sale
Drilling Rig - Mobile B61 HDX - For Sale

Model : B61 HDX Drill Rig
Manufacturer : Mobile
Condition : Used

Description :

Mobile B61 HDX Drill Rig - S/N: 92007
L8 Monyo Water Pump
Cummins 4BT Diesel Deck Engine
12,000 LB Pullmaster Winch
Two AUX Winches
In Out & Side to Side
20,000 FTLB Tourque Transmission "Shift on the Fly" Automatic
Swing Out Auger Racks
Drilling Capacities :
Mounted on a 1992 Ford F-800 Truck - VIN: 1FDXK84A3NVA14295
Rotary Drilling with 2-5/8” diameter drill rod…… 1350 ft.
(410 m). = we can provide new drill pipe like this at additional
cost approximately $250 USD per 5 ft. stick.
Core Drilling with AW size tools or AQ wire line… 2250 ft. (685 m).
Core Drilling with NW size tools or NQ wire line… 1350 ft. (410 m).
Continuous Flight-Auger Diameter Range…... up to 14” (355 mm).
Max. Depth w/ 6” Dia. (152.4 mm) Augers…………………………….. 360 ft. (110 m).
Max. Depth w/ 8” Dia. (203.2 mm) Augers…………………………….. 250 ft. (76.2m).
Note : Drilling Capacities are based on maximum depths obtained in
actual field test and will vary with local subsurface conditions.
Note : (Cracked Windshield & Missing Headlight)
Mounted on a 1992 Ford F-800 Truck - VIN: 1FDXK84A3NVA14295
Odometer Reads : 133,343 Miles
Note : If you are wanting to do direct rotary drilling with drill pipe
and roller cone bit or DTH hammer then you will need an add auxiliary
mud pump or auxiliary air compressor. If you do not have mud pump or
compressor then we do have some options in stock we can offer at
additional costs.
Ingersoll-Rand 400 CFM / 200 PSI air compressor, enclosed, trailer mounted.
Ingersoll-Rand 600 CFM / 125 PSI air compressor, enclosed, trailer mounted.
Ingersoll-Rand 750 CFM / 300 PSI Air Compressor mounted on 1996 Volvo truck
p/b Cat 3406E.
Sullair 900 CFM / 350 PSI air compressor, enclosed, skid mounted.
Gardner Denver FXFF 4 x 5 Duplex mud pump p/b CAT 3304, skid mounted.
Gardner Denver FXF 4 x 5 Duplex mud pump p/b Waukesha 4-cylinder diesel
engine, skid mounted.

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Used Mobile B61 HDX Drilling Rig for Sale
Mobile B61 HDX Used Drilling Rig for Sale
Mobile B61 HDX Land Drilling Rig for Sale
Used Mobile Drilling Rig for Sale
Mobile B61 HDX Drilling Rig for Sale In USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR998

CME 850 Drilling Rig for Sale
CME 850 Drilling Rig - 1999 Built for Sale

Model : 850 Drill Rig
Manufacturer : CME Drill
Year : 1999
Condition : Used

Description :

1999 CME 850 Drill Rig - Serial: 292492
Hours : 8,683 on meter
Cummins 4BT Diesel Engine with 4 Cylinders
Transmission : Hydrostatic 5-speed with reverse
Features : Mast height: 23 ft
Pump : Moyno 3L8, Size: 3" diameter
Mounted on a Track Carrier
Tracks Width : 33" Rubber/Steel
Auto hammer
Front winch
28,275 lbs of Pullback
Notes : Runs and drives when tested last

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
1999 Built CME 850 Drilling Rig for Sale
Drilling Rig - CME 850 - For Sale
Used CME 850 Drilling Rig for Sale
CME 850 Used Land Drilling Rig for Sale
CME 850 Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR2692

Chicago Pneumatic T650WS Drilling Rig for Sale
Drilling Rig - Chicago Pneumatic T650WS - For Sale

Model : T650WS Drill Rig
Manufacturer : Chicago Pneumatic
Year : 1978
Condition : Used

1978 Chicago Pneumatic T650WS Drill Rig
GHH 825 cfm / 300 psi Air Compressor
CAT 3406 Diesel Deck Engine (recently install reman head on deck engine)
2 Piston Bean water injection pump
Hammer lubricator
300 Ft of drill pipe (20ft mix) - 4” & 4-1/2” mixed & 20 ft 3-1/2" Thread
Mounted on Ford Truck - VIN#: U81QVCC9241
CAT 3208 Diesel Engine
Note: Bill of Sale only & no title available

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
1978 Built Chicago Pneumatic T650WS Drilling Rig for Sale
Chicago Pneumatic T650WS Drilling Rig 1978 Built for Sale
Used Chicago Pneumatic T650WS Drilling Rig for Sale
Chicago Pneumatic T650WS Used Land Drilling Rig for Sale
Chicago Pneumatic T650WS Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR2573

Mobile Drill B-57 Auger / Coring Drilling Rig for Sale
Drilling Rig - Mobile Drill B-57 Auger / Coring - For Sale

Model : B-57 Drill Rig
Manufacturer : Mobile
Condition : Used

Description :

Mobile Drill B-57 Auger / Coring Drill Rig - Serial : 90091
Cummins 4 Cylinder Deck Diesel Engine
Mounted on a 1990 Ford F800 truck - VIN : 1FDXK84A6LVA47983
Miles : 106,812 on odometer
Ford 6-cylinder Diesel Engine Displacement : 7.8L
Manual 10 Speed Transmission
Axles : Tandem
Lift axle
Pusher axle
GVWR : 30,000
Features : Bed/drill
Bean Triplex Piston pump
Saftey hammer
Tires Size : 11R22.5

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Used Mobile Drill B-57 Auger / Coring Drilling Rig for Sale
Mobile Coring Drilling Rig for Sale
Mobile Drill B-57 Auger / Coring Used Drilling Rig for Sale
Mobile Land Drilling Rig for Sale
Mobile Drill B-57 Auger / Coring Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR2986

1200T SWL Pedestal Crane for Sale
Two Units 1200T SWL Pedestal Crane for Sale

Model : ATL-60
Manufacturer : Amclyde/Nov
Year : 2012
Condition : Used

Description :
Maker : NOV/Am-Clyde
Class : DNV incl. man riding
Crane Voltage : 690V, Crane equipped with 6,6 KV transformers

Crane Capacities :
Capacity Main : 1200t@14-31m,600t@50m, 250t@70m
Capacity Aux : 500t@20.3-60m, 120t@100m
Capacity Whip : 50t@22.9-113.4m
Man-riding Capacity : 5 ton all radii
Boom Length (from center line of boom foot pin) :
Length to main fall upper block sheaves : 85.5m
Length to auxiliary fall upper block sheaves :107.0m
Length to whip fall jib tip sheaves :115.0m
Operating Radius :
Main fall : 18.0-91.0m
Auxilliary fall : 20.0-105.0m
Whip fall : 22.55-113.41m

Winches :
Main hoist winch : 66.8 MT single linepull at 64m/min, 4x186 KW
Aux hoist winch : 68.7 Mt single linepull at 62m/min, 4x186 KW
Whip hoist winch : 27.5 MT single linepull at 158m/min, 4x186 KW
Boom hoist winch : 2.3 MT single linepull at 26-61m/min, 3x186 KW
Swing drives : 6x149 KW, Swing speed 0,3 RPM
Tugger winches, 4xload control : 25 MT single line at 16m/min,75 KW each

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Used 1200T SWL Pedestal Crane for Sale
1200T SWL Pedestal Crane - 2012 Built - For Sale
DNV Classed 1200T SWL Pedestal Crane for Sale
Used Two Units 1200T SWL Pedestal Crane for Sale
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR1207

Atlas Copco L830 Crawler Drilling Rig for Sale
Drilling Rig - Atlas Copco L830 Crawler - For Sale

Model : L830 Crawler Drill Rig
Manufacturer : Atlas Copco
Year : 2008
Condition : Used

Description :

2008 Atlas Copco Roc L8-30 Crawler Drill Rig
S/N: AVO08A1240
Set up for 4” drill pipe
4.5" - 8" DTH Class
CAT C15 Diesel Engine - Rebuilt on 3-21-20 at 15,132 hours
Current frame hours 17,863 Rotary head hours 8,987
High Pressure 995 CFM / 435 PSI Air Compressor - Rebuilt on 5-15-2017
Oil Cooler pack replaced on 10-31-2017
Break Out Table
Dust Collector
Cable Feed System
Aluminum Profile Guide shell
17,000+ Hour Machine

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Used Atlas Copco L830 Crawler Drilling Rig for Sale
2008 Built Atlas Copco L830 Crawler Drilling Rig for Sale
Atlas Copco L830 Crawler Drilling Rig - 2008 Built - For Sale
Used Atlas Copco L830 Crawler Land Drilling Rig for Sale
Atlas Copco L830 Crawler Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR2985

IDM Drilling Rig for Sale
Drilling Rig - IDM 1500 HP - For Sale

Model : IDM DC-1500
Manufacturer : IDM Equipment
Condition : Used

Description :
Drawworks
Manufacturer : IDM Equipment
Model : IDM DC-1500
Power : 1500-HP (Powered by (2) GE/GM 800-HP DC Traction Motors)
Hours/Rebuild : 5629

Engines
Manufacturer : Cummins
Model : KTA50 Diesel Engines (x3)
Power : 1470-HP each (With Air Start)
Configuration : Skid Mount Enclosures with Generators
Engine Serial Numbers and Hours :
Engine 1 : Hours 50010
Engine 2 : Hours 49456
Engine 3 : Hours 49144

Generator Sets
Manufacturer : AVK, WEG
Capacity : 1050-KW (x3)
Configuration : Unitized with Engines, includes SCR Skid

Mast
Manufacturer : IDM
Type : 136ft Telescoping Mast
Capacity : 750,000-LB Hookload
Features : Can Accommodate 350-Ton Drive, Geronimo Line, Hydraulic Lift Cylinders, Mast Dolly

Substructure
Manufacturer : IDM
Type : 22ft Hydraulically Telescoping Substructure
Capacity : 750,000-LB Rotary Load, 450,000-LB Simultaneous Setback
Features : Integrated Drainage System, (2) Braden Floor Winches

Rotary
Type : EMSCO Type 371⁄2 Rotary
Drive : Independently driven by (1) 800-HP Traction Motor

Blowout Preventer (BOP)
Configuration :
(1) 13-5/8" 10,000-LB Shaffer Type Double Ram BOP
(1) 13-5/8" 10,000-LB Shaffer Type Single Ram
(1) 13-5/8" 5,000-LB Shaffer Type Annular
Accessories :
(1) 6-Station Accumulator (Consolidated Pressure, Model 6S-3SF60-25, API 16E)
10,000-LB Flexible Choke Line
4ft x 4’’ 10,000-LB Choke Manifold

Mud Pumps
Manufacturer : BOMCO
Model : F-1600 Triplex Mud Pumps (x2)
Pressure Rating : 7500 PSI
Motors : EMD DC Traction Motors rated at 1600-HP
Mud Pump Serial Numbers and Hours :
MP 1 : Bomco 1600
MP 2 : Hours/Rebuild 9173

Mud System
Capacity : 848-Barrels Total Active Capacity
Components :
(2) Covered 424-Barrel Tanks with Electric Agitators
(1) Mud Processing Skid with Brandt Equipment (Shakers, Degasser, Desilter)
(1) Trip Tank Skid (106-Barrel Capacity) with Centrifugal Pump

Top Drive
Manufacturer : Canrig
Model : 350-Ton AC (Model 350)
Features : "ROCKIT" Capability

Overhead String
Configuration : 400-Ton Six Sheave Block with a 12 Line String Up of 1-3/8’’

Driller Controls
Type : Drillers Cabin Skid
Features : Varco Electronic Driller and Block Control System, Block Speed
Controls, Joystick Controlled Drawworks Speed, Touch Screen and Manual
Control of EDRILL and SCR

Walking System
Manufacturer : Orion
Type : Hydraulic Walking System
Components : HPU Skid and Trailer

Auxiliary Equipment
Automatic Catwalk : Canrig, Model PO 3000-26-B-A-A-N-S, S/N 300368
Wireline Unit : Five Star Rig with 25,000’ of .092 Wireline
Motorized Drill Line Spool
Quarters : Toolpusher and Crew Quarters (Skidded, Furnished, Satellite System)
Meeting and Change House Combo Skid
Hydraulic Power Unit Skid with Centrifugal Pumps and Reservoir
Pipe and Kelly Spinner : Hydraulic (Hawk, Spinmaster, Model 550)
Fuel Tank : 12,000 Gallons, Double Wall, Skidded with Pumps
Water Tank Skid with Centrifugal Pumps
Hot Water Power Washer : N/A

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
IDM 1500 HP Drilling Rig for Sale
Used IDM Drilling Rig for Sale
IDM 1500 HP Land Drilling Rig for Sale
IDM Used Land Drilling Rig for Sale
IDM Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR2983

Continental EMSCO Drilling Rig for Sale
2006 Built Continental EMSCO Drilling Rig for Sale

Model : C-1
Manufacturer : Continental EMSCO
Year : March 2006
Condition : Used

Description :
Drawworks
Manufacturer : Continental EMSCO
Model : C-1
Power : 1500-HP
Motors : (2) GM, 800-HP DC Traction Motors
Brake : Wichita Brake Auxiliary Brake
Control System : Varco Drilling System Interface
Hours : 9785
Note : Transmission shaft and splines removed for Draco

Generator Sets
3 X Generators - Catipillar 3512b

SCR House
Configuration: 3x4

Mast
Manufacturer : National Oilwell
Type : 136ft Telescoping Mast
Capacity : 750,000-LB Hook Load
Features :
Accommodates 350-Ton Top Drive
Geronimo Line
IDM Crown
Hydraulic Lift Cylinders
Mast Dolly

Substructure
Manufacturer : IDM
Type : 22ft Hydraulically Telescoping Substructure
Capacity :
750,000-LB Rotary Load
400,000-LB Simultaneous Setback
Features : Integrated Drainage System, (2) Braden Floor Winches

Rotary
Manufacturer : EMSCO
Model : Type 371⁄2"
Drive : Independently driven by (1) 800-HP DC Traction Motor

Blowout Preventer (BOP)
Configuration :
(1) 13-5/8" 10,000-LB Double Ram BOP
(1) 13-5/8" 10,000-LB Single Ram
(1) 13-5/8" 5,000-LB Annular
Type : Shaffer
Compliance : Meets API 16D
(1) 6 Station Accumulator, Beijing Petroleum, Model FXQ720-6, API 16E
Flexible Choke Line : 10,000-LB
Choke Manifold : 4ft x 4’’ 10,000-LB

Mud Pumps
2X Mud Pumps - FB1600 Continentail EMSCO

Mud System
Total Active Capacity : 848 Barrels
Components :
Tanks :
(2) Covered 424-Barrel Tanks with Round Bottoms and Electric Agitators
Each tank contains (2) 5 x 6 x 75-HP Centrifugal Pumps, Remote Hopper Skid
Mud Processing Skid :
Hydraulically Raised
(3) Brandt King Cobra Shakers
Brandt DG-10 Degasser
Brandt 16 Cone Desilter
Trip Tank Skid :
106-Barrel Capacity
2 x 3 x 25-HP Centrifugal Pump
Suction Tank :
424-Barrel Capacity
(2) 6x5x14 Centrifugal Pumps
Includes 100-Barrel Slug Tank
Intermediate Tank :
424-Barrel Total Capacity
(3) Separate Tanks at 141 Barrels each
(2) 6x5x14 Centrifugal Pumps

Top Drive
1 X 350 T Top Drive Canrig

Overhead String
Configuration :
400-Ton Six Sheave Block
12 Line String
1 3/8" Line

Driller Controls
Type : Drillers Cabin Skid
Features :
Varco Electronic Driller and Block Control System
Block Speed Controls
Joystick Controlled Drawworks Speed
Touch Screen and Manual Control of EDRILL and SCR

Auxiliary Equipment
Automatic Catwalk : Forum, Wrangler, S/N LW06072168PWC36AC
Wireline Unit : Five Star Rig with 25,000ft of .092 Wireline
Motorized Drill Line Spool
Crew Facilities :
Toolpusher and Crew Quarters, Skidded, Furnished, Satellite System
Meeting and Change House Combo Skid
Parts House Skid
Hydraulic Power Unit Skid : with Centrifugal Pumps and Reservoir
Pipe and Kelly Spinner : Hydraulic (Hawk, Spinmaster, Model 550-H)
Fuel Tank : 12,000 Gallons, Double Wall, Skidded with Pump
Water Tank Skid : with Centrifugal Pumps
Hot Water Power Washer

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Continental EMSCO Drilling Rig - 2006 Built for Sale
Used Continental EMSCO Drilling Rig for Sale
1500-HP Continental EMSCO Drilling Rig for Sale
Continental EMSCO Drilling Rig for Sale in USA
Continental EMSCO Used Drilling Rig for Sale
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR2984

IDM Drilling Rig for Sale
IDM 1500 HP Drilling Rig for Sale

Model : IDM-1500
Manufacturer : IDM Equipment
Year : February 2007
Condition : Used

Description :

Drawworks
Manufacturer : IDM Equipment
Model : IDM-1500
Power : 1500-HP
Motors : (2) Gulf Electroquip 800-HP DC Traction Motors
Hours : 11405

Engines
Manufacturer : Cummins
Model : KTA50DR Diesel Engines (x3)
Power : 1470-HP each
Features : Air Start, Skid Mount Enclosures with Generators

Generator Sets
Manufacturer : AVK, WEG
Model : DSG 86 L1-6W
Capacity : 1050-KW each (x3)
Features : Unitized with Engines, Includes SCR Skid

SCR House
Configuration : IDM SCR 3x4

Mast
Manufacturer : IDM
Type : 136ft Telescoping Mast
Model : QDS-1500
Capacity : 750,000-LB Hook Load
Features : Can Accommodate 350-Ton Drive, Geronimo Line,
Hydraulic Lift Cylinders, Mast Dolly

Substructure
Manufacturer : IDM
Type : 22ft Hydraulically Telescoping Substructure
Capacity : 750,000-LB Rotary Load, 450,000-LB Simultaneous Setback
Features : Integrated Drainage System, (2) Braden Floor Winches

Rotary
Manufacturer : EMSCO
Model : Type 371⁄2 Rotary
Drive : Independently driven by (1) Hydraulic Drive Motor

Blowout Preventer (BOP)
Configuration :
(1) 11’’ 10M Shaffer Type Double Ram BOP
(1) 11’’ 10M Shaffer Type Single Ram BOP
(1) 11’’ 5M Shaffer Type Annular
(1) 6 Station Accumulator, Beijing Petroleum, Model FXQ720-6, API 16E
10,000-LB Flexible Choke Line and 4ft x 4’’ 10,000-LB Choke Manifold

Mud Pumps
2X Mud Pumps - FB1600 Continentail EMSCO

Mud System
Total Active Capacity : 848 Barrels
Components :
(2) Covered 424-Barrel Tanks with Round Bottoms and Electric Agitators,
each containing (2) 5x6x75-HP Centrifugal Pumps, Remote Hopper Skid
(1) Mud Processing Skid, Hydraulically Raised, with (3) Brandt King
Cobra Shakers, Brandt DG-10 Degasser, Brandt 16 Cone Desilter
(1) Trip Tank Skid, 106-Barrel Capacity, with 2x3x25-HP Centrifugal Pump

Top Drive
1 X 350 T Top Drive Canrig

Overhead String
Configuration : 400-Ton Six Sheave Block with a 12 Line String Up of 1-3/8’’

Driller Controls
Type : Drillers Cabin Skid
Features : Varco Electronic Driller and Block Control System, Block
Speed Controls, JoystickControlled Drawworks Speed, Touch Screen and
Manual Control of EDRILL and SCR

Auxiliary Equipment
Automatic Catwalk : Forum, S/N LW09072189PWC51 PW
Wireline Unit : Five Star Rig with 25,000’ of .092 Wireline
Motorized Drill Line Spool
Quarters : Toolpusher and Crew Quarters, Skidded, Furnished, Satellite System
Meeting and Change House Combo Skid
Hydraulic Power Unit Skid with Centrifugal Pumps and Reservoir
Pipe and Kelly Spinner : Hydraulic (Hawk, Spinmaster, Model 550-H)
Fuel Tank : 12,000 Gallons, Double Wall, Skidded with Pump
Water Tank Skid with Centrifugal Pumps
Hot Water Power Washer

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
2007 Built IDM Drilling Rig for Sale
Used IDM Drilling Rig for Sale
IDM Drilling Rig - 2007 Built for Sale
Drilling Rig - IDM 1500 HP - 2007 Built - for Sale
IDM Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR2982

Continental EMSCO Drilling Rig for Sale
Drilling Rig - Continental EMSCO - For Sale

Model : C-1
Manufacturer : Continental EMSCO
Year : February 2005
Condition : Used

Description :

Drawworks
Manufacturer : Continental EMSCO
Model : C-1
Power : 1500-HP
Motors : (2) 800-HP DC Traction Motors
Hours : N/A

Generator Sets
3 X Generators - Catipillar 3512B

SCR House
Configuration : 3x4

Mast
Manufacturer : IRI
Type : 136ft Telescoping Mast
Capacity : 750,000-LB Hook Load
Features : Accommodates 350-Ton Top Drive, IDM Crown, Hydraulic
Lift Cylinders, Geronimo Line, and Mast Dolly

Substructure
Manufacturer : IRI
Type : 22ft Hydraulically Telescoping Substructure
Capacity : 750,000-LB Rotary Load, 400,000-LB Simultaneous Setback
Features : Integrated Drainage System, (2) Braden Floor Winches

Rotary
Manufacturer : EMSCO
Model : Type 27-1/2’’ Rotary
Drive : Independently driven by (1) Hydraulic Haglund Motor

Blowout Preventer (BOP)
Configuration :
(1) 11’’ 10M Shaffer Type Double Ram BOP
(1) 11’’ 10M Shaffer Type Single Ram BOP
(1) 11’’ 5M Shaffer Type Annular
(1) KPM Koomey 6 Station Accumulator, Model T15160-3, S/N 2430, API 16E

Mud Pumps
2 X Mud Pumps - FB1300 CONTINENTAIL EMSCO

Mud System
Total Active Capacity : 848 Barrels
Components :
(2) Covered 424-Barrel Tanks with Round Bottoms and Electric Agitators,
each containing (2) 5x6x75-HP Centrifugal Pumps, Remote Hopper Skid
(1) Mud Processing Skid, Hydraulically Raised, with (3) Brandt King
Cobra Shakers, Brandt DG-10 Degasser, Brandt 16 Cone Desilter
(1) Trip Tank Skid, 106-Barrel Capacity, with 2x3x25-HP Centrifugal Pump
Suction Tank : 424-Barrel Capacity, with 2 each 6x5x14 Centrifugal Pumps,
includes 100-Barrel Slug Tank
Intermediate Tank : 424-Barrel Total Capacity, with 3 separate tanks
at 141-Barrels each, 2 each 6x5x14 Centrifugal Pumps

Top Drive
1 X 350 T Top Drive Canrig

Overhead String
Configuration : 400-Ton Six Sheave Block, with a 12 Line String, 1 3/8" Line

Driller Controls
Type : Drillers Cabin Skid
Features : Varco Electronic Driller and Block Control System, Block Speed
Controls, JoystickControlled Drawworks Speed, Touch Screen and Manual
Control of EDRILL and SCR

Walking System
Details : N/A

Auxiliary Equipment
Automatic Catwalk : Forum, S/N 35SP0108187AC89
Wireline Unit : Five Star Rig with 25,000ft of .092 Wireline
Motorized Drill Line Spool
Meeting and Change House Combo Skid
Hydraulic Power Unit Skid with Centrifugal Pumps and Reservoir
Pipe and Kelly Spinner : Hydraulic (Hawk, Spinmaster, Model 550-H)
Fuel Tank : 12,000 Gallons, Double Wall, Skidded with Pump
Water Tank Skid with Centrifugal Pumps

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
2005 Built Continental EMSCO Drilling Rig for Sale
1500-HP Continental EMSCO Drilling Rig for Sale
Continental EMSCO Drilling Rig - 2005 Built - For Sale
Used Continental EMSCO Drilling Rig for Sale
Continental EMSCO Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR2981

Ideco E-1200 Drilling Rig for Sale
2003 Built Ideco E-1200 Drilling Rig - For Sale

Model : E-1200
Manufacturer : Ideco
Year : November 2003
Condition : Used

Description :

Drawworks
Manufacturer : IDECO
Model : E-1200
Power : 1200-HP
Motors : (2) Toshiba 900-HP DC Traction Motors
Hours : 13369

Engines
Manufacturer : Caterpillar
Model : 3512DITA Diesel Engines (x3)
Power : 1321-HP each
Features : Air Start, Skid Mount Enclosures with Generators

Generator Sets
Manufacturer : KATO, WEG
Model : 1050-680361111
Capacity : 1050-KW each (x3)
Features : Unitized with Engines, Includes VFD/SCR Skid

SCR House
Configuration : 3x4

Mast
Manufacturer : IRI
Type : 127ft Telescoping Mast
Capacity : 550,000-LB Hook Load
Features : Accommodates 275-Ton Top Drive, Hydraulic Lift Cylinders,
Geronimo Line, Mast Dolly

Substructure
Manufacturer : IRI
Type : 22ft Hydraulically Telescoping Substructure
Capacity : 550,000-LB Rotary Load, 300,000-LB Simultaneous Setback
Features : Integrated Drainage System for Fluid Containment,
(2) Braden Floor Winches

Rotary
Manufacturer : IDECO
Model : 27-1/2’’ Rotary
Drive : Independently driven by (1) 800-HP DC Traction Motor

Blowout Preventer (BOP)
Configuration :
(1) 11’’ 10M Shaffer Type Double Ram BOP
(1) 11’’ 10M Shaffer Type Single Ram BOP
(1) 11’’ 5M Shaffer Type Annular
(1) KPM Koomey 6 Station Accumulator, Model T15160-3, S/N 2430, API 16E

Mud Pumps
Manufacturer : BOMCO
Model : F-1600 Triplex Mud Pumps
Pressure Rating : 5000 PSI
Motors : EMD DC Traction Motors rated at 1600-HP

Mud System
Total Active Capacity : 848 Barrels
Components :
(2) Covered 424-Barrel Tanks with Round Bottoms and Electric Agitators,
each containing (2) 5x6x75-HP Centrifugal Pumps, Remote Hopper Skid
(1) Mud Processing Skid, Hydraulically Raised, with
(3) Brandt King Cobra Shakers, Brandt DG-10 Degasser, Brandt 16 Cone Desilter
(1) Trip Tank Skid, 106-Barrel Capacity, with 2x3x25-HP Centrifugal Pump
Suction Tank, 424-Barrel Capacity, (2) 6x5x14 Centrifugal Pumps,
includes 100-Barrel Slug Tank
Intermediate Tank, 424-Barrel Total Capacity, 3 Separate Tanks
at 141-Barrels each, (2)6x5x14 Centrifugal Pumps

Top Drive
Manufacturer : Canrig
Capacity : 275-Ton AC
Features : "ROCKIT" Capability
Hours : 21033

Overhead String
Configuration : 300-Ton Five Sheave Block with a 10 Line String Up

Driller Controls
Type : Drillers Cabin Skid
Features : Varco Electronic Driller and Block Control System,
Block Speed Controls, Joystick Controlled Drawworks Speed,
Touch Screen and Manual Control of EDRILL and SCR

Auxiliary Equipment
Automatic Catwalk : Forum, Wrangler 3500, S/N 355P0108187AC89, 22.5ft Floor
Wireline Unit : Five Star Rig with 25,000ft of .092 Wireline
Motorized Drill Line Spool
Quarters : Toolpusher and Crew Quarters, Skidded, Furnished, Satellite System
Meeting and Change House Combo Skid
Hydraulic Power Unit Skid with Centrifugal Pumps and Reservoir
Pipe and Kelly Spinner : Hydraulic (Hawk, Spinmaster, Model 550)
Fuel Tank : 12,000-Gallons, Double Wall, Skidded with Pump
**Water Tank Skid with Centrifugal Pumps

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Ideco E-1200 Drilling Rig - 2003 Built for Sale
Used Ideco E-1200 Drilling Rig for Sale
Ideco E-1200 Used Drilling Rig for Sale
1200-HP Ideco E-1200 Drilling Rig for Sale
Ideco E-1200 Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR2944

Pump Hoist Rig for Sale
Used Pump Hoist Rig for Sale

Model : Pump Hoist Rig
Manufacturer : Ford
Condition : Used

Description :

Pump Hoist Rig
Mounted on a 1990 Ford F350 XLT 4X4 Truck
VIN: 2FDKF38G5LCA77708
Ford 460 7.5 Liter Gas Engine
94,921 Miles on Odometer
GVWR range 10,001 to 19,500 lbs.
4 Outrigger Style Leveling Jacks
(Rotating Style Extenable Hoist)
Sand Line
Toolboxes
Bailor and Misc. Tooling Included
Body & Deck Has Some Rust

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Pump Hoist Rig Mounted on a 1990 Ford Truck for Sale
Pump Hoist Rig - Ford 460 7.5 Liter Gas Engine - For Sale
Used Land Pump Hoist Rig for Sale
Land Pump Hoist Rig for Sale
Pump Hoist Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR1047

Atlas Copco T4BH (Blasthole) Drilling Rig for Sale
Drilling Rig - Atlas Copco T4BH (Blasthole) - For Sale

Model : T4BH (Blasthole) Drill Rig
Manufacturer : Atlas Copco
Year : 2009
Condition : Used

Description :

2009 Atlas Copco T4BH (Blasthole) Drill Rig - S/N: 8887
Cummins QSK19 Diesel Deck Engine - rated 755HP & 1800 RPM
IR HR2.5 1250 cfm / 350 psi Air Compressor
Hour meter shows 3157.3 Hours
2 Motor Spur Gear Power Head with Foremost float sub
37,500 Lbs of Pullback
5 Rod Carousel set up for (3) 7” drill pipe
Hammer lubrication
2 Piston Bean water injection
2009 Mounted on CCC (Crane Carrier Company) Truck - VIN#1CYDCV58X9T048815
Caterpillar C13 Diesel Engine - rated 325 HP
Jake brakes
8LL Speed Transmission
Note: Can be converted to T4W or T4W DH for water well drilling for an extra cost

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
2009 Built Atlas Copco T4BH (Blasthole) Drilling Rig for Sale
Used Atlas Copco T4BH (Blasthole) Drilling Rig for Sale
Atlas Copco T4BH (Blasthole) Drilling Rig - 2009 Built for Sale
Atlas Copco T4BH (Blasthole) Used Land Drilling Rig for Sale
Atlas Copco T4BH (Blasthole) Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR1891

Atlas Copco T4BH (Blasthole) Drilling Rig for Sale
Drilling Rig - Atlas Copco T4BH - For Sale

Model : T4BH (Blasthole) Drill Rig
Manufacturer : Atlas Copco
Year : 2010
Condition : Used

Description :

2010 Atlas Copco T4BH (Blasthole) Drill Rig - S/N: 9089
Cummins QSK19 Diesel Deck Engine - rated 755HP & 1800 RPM (11.3 Hours on Meter)
IR HR2.5 1250 cfm / 350 psi Air Compressor
2 Motor Spur Gear Power Head
37,500 LBS of Pullback
5 Rod Carousel Set Up for (3) 7” Drill Pipe
Hammer Lubrication
2 Piston Bean Water Injection
2010 Mounted on a CCC (Crane Carrier Company) Truck - VIN#1CYDCV580AT049672
Caterpillar C13 Diesel Engine - rated 325 HP
Jake Brakes
8LL Speed Transmission
Note: Can be converted to T4W or T4W DH for water well drilling for an extra cost
Note: Bill of sale only

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
2010 Built Atlas Copco T4BH (Blasthole) Drilling Rig for Sale
Used Atlas Copco T4BH (Blasthole) Drilling Rig for Sale
Atlas Copco T4BH (Blasthole) Drilling Rig - 2010 Built - For Sale
Atlas Copco T4BH Used Land Drilling Rig for Sale
Atlas Copco T4BH (Blasthole) Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR995

Atlas Copco T4BH (Blasthole) Drilling Rig for Sale
Drilling Rig - Atlas Copco T4BH - For Sale

Model : T4BH (Blasthole) Drill Rig
Manufacturer : Atlas Copco
Year : 2006
Condition : Used

Description :

2006 Atlas Copco T4BH (Blasthole) Drill Rig - S/N: 8513
IR HR2.5 1250 cfm / 350 psi Air Compressor
2 Motor Spur Gear Power Head
37,500 LBS of Pullback
5 Rod Carousel Set Up for (3) 7” Drill Pipe
Hammer Lubrication
2 Piston Bean Water Injection
2006 Mounted on a CCC (Crane Carrier Company) Truck - VIN1CYDCH4896T047122
Caterpillar C13 Diesel Engine - rated 325 HP - Miles 8,888.7 and Hours 6,496
Jake Brakes
8LL Speed Transmission
Planetary Rears
Note: Can be converted to T4W or T4W DH for water well drilling for an extra cost
Note: Bill of Sale Only

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
2006 Built Atlas Copco T4BH Drilling Rig for Sale
Atlas Copco T4BH Drilling Rig - 2006 Built - for Sale
Used Atlas Copco T4BH (Blasthole) Drilling Rig for Sale
Atlas Copco T4BH Land Drilling Rig for Sale
Atlas Copco T4BH (Blasthole) Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR308

Speedstar 70K Drilling Rig for Sale
Drilling Rig - Speedstar 70K - For Sale

Model : 70K Drill Rig
Manufacturer : Speedstar
Year : 1982
Condition : Used

Description :

1982 Speedstar 70K Drill Rig
740 ft of 5" Drill Pipe
2 Drill collars
Mounted on a CCC (Crane Carrier Company) Truck
Diesel Engine

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
1982 Built Speedstar 70K Drilling Rig for Sale
Used Speedstar 70K Drilling Rig for Sale
Speedstar 70K Used Drilling Rig for Sale
Speedstar 70K Drilling Rig - 1982 Built - For Sale
Speedstar 70K Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR2978

Derex 1340-12X DR (Dual Rotary) Drilling Rig for Sale
Drilling Rig - Derex 1340-12X DR (Dual Rotary) - For Sale

Model : 1340-12X DR (Dual Rotary) Drill Rig
Manufacturer : Derex
Condition : New

Description :

Derex 1340-12X DR (Dual Rotary) Drill Rig
Truck
Acela Monterra 4×4
No Emission Controls
330HP Caterpillar 7.2L Turbo-Charged Diesel Engine
Full-Time All-Wheel Drive
Allison Automatic 7-Speed Transmission
U.S. Army “Ultra-Reliable” Certification
22″ Ground Clearance
Transfer Case
Namco (oilfield quality)
Safe Shift
Hydraulic System
Bosch Rexroth plus gear pump
Top Head
Variable torque and RPM with 2” thru-hole
0-125 rpm @ 3,500-lbf
Lower drive
Variable torque and RPM with 10” thru-hole
0-23 rpm @ 20,000-lbf
Diverter
Simple seal design with 4” NPT discharge
to control cuttings.
Derrick & Feed System
13ft top head stroke (handles 10ft x 3" OD drill pipe)
40,000-lbs pullback
20,000-lbs pulldown
100 FPM
Derrick slide/ dump
4ft Derrick slide for angles up to 45°
Main Winch
Manual jib
2,500 lb.
Remote on helpers side for winch
Control Panel
Straight hydraulic controls (no electrics to fail)
Marine grade electric switches (for lights)
Murphy engine monitor display
Twin platforms
Leveling Jacks
Four 36” stroke independently controlled
Night Lights
6 LED night lights
Toolboxes
30”x 18” x 18”
Overall Dimensions
Length: 24ft 11”
Width: 8ft 6”
Derrick up height: 24ft 6” – 28ft 6” with Derrick slide
Derrick down height: 11ft
Water Injection
9-GPM FMC injection pump
Gross Weight
28,000lbs - 30,000lbs
Casing
Diameter 4", 5" & 6" (with 8" & 10" option for surface casing)
Pre-Order Drill from EWDAdditional Options
4 – 6 Month Leadtime from Date Ordered
Sand Line Winch
1,500ft sand line
Mud Pump
3x2x13 centrifugal 300 gpm/300 psi
Centerline piston 150 gpm/600 psi
Line Oiler
Many oilers available
Water InjectionDrill Pipe Packages
18 gpm FMC injection pump
Wire Feeder and Box
Hydraulic or Gas Welders

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
New Derex 1340-12X DR (Dual Rotary) Drilling Rig for Sale
Derex 1340-12X DR Drilling Rig for Sale
New Derex 1340-12X DR Drilling Rig for Sale
Derex 1340-12X DR Land Drilling Rig for Sale
Derex 1340-12X DR (Dual Rotary) Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR2976

Brand New Massenza Hydraulic Drilling Rig Model Mi8 for Sale
Massenza Hydraulic Drilling Rig for Sale

Description :

Used for water well research, geological findings, mineral research and
geothermal applications.

Work Methods:
Rotary drilling with direct circulation by Water, Mud, Air or Foam
Down the Hole Hammer Drilling
Auger Drilling
Core Drilling

Main Framework:
Made out of electrically welded high quality steel structural members
and tubular pieces.
N°4 hydraulic stabilizers of which two are fixed and the other two
can be manually widened for the leveling and positioning of rig,
complete with check valve and support plate.
Stabilizers dimensions 3 3/4" x 3 5/32" x 2 3/8", stroke 1 ft 3 3/4",
lifting force 26,566 lbs each.
Pre-arrangement for drill pipe box.

Control Panel Fixed:
Unified type, complete with valves, distributors, pressure gauges, diesel
engine and rig control instrumentation and controls for rig positioning.


Crawler Undercarriage:
Tracked crawler unit complete with hydraulic circuit of translation and
controls on the portable unit.
Steel tracks width 11 13/16"
Total width 5 ft 5 15/16"
Length 8 ft 4 9/16"
Traction force 15076 lbf
Speed 0.74 m/h (1.2 km/h)

Maximum Drilling Depth with mud pumps is : 260 mts (850 ft).

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Drilling Rig - Massenza Hydraulic - For Sale
New Massenza Hydraulic Crawler Drilling Rig for Sale
Massenza Hydraulic Drilling Rig Model Mi8 Mounted On Tracks for Sale
Brand New Massenza Hydraulic Drilling Rig for Sale
Massenza Hydraulic Crawler Drilling Rig Model Mi8 for Sale
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR2977

Brand New Massenza Hydraulic Drilling Rig Model Mi5 for Sale
Drilling Rig - Massenza Hydraulic - For Sale

Description :

Used for water well research, geological findings, mineral research
and geothermal applications.

Work Methods:
Rotary drilling with direct circulation by Water, Mud, Air or Foam
Down the Hole Hammer Drilling
Auger Drilling
Core Drilling

Main Framework:
Made out of electrically welded high quality steel S 355 JR.
N°4 hydraulic stabilizers of which two are fixed and the other
two can be manually widened for the levelling and positioning
of rig, complete with check valve.

Control Panel:
Fixed control panel, complete with valves, distributors, pressure
gauges, reading gauges for pull-up, pressure thrust on drill battery,
balancing system, diesel engine control.

Diesel Fuel Tank: capacity 30,4 US Gallon.

Maximum Drilling Depth with mud pumps is : 210 mts (690 ft).

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
New Massenza Hydraulic Drilling Rig for Sale
Massenza Hydraulic Drilling Rig Model Mi5 Mounted On Tracks for Sale
Brand New Massenza Hydraulic Drilling Rig Mounted On Tracks for Sale
New Massenza Hydraulic Crawler Drilling Rig for Sale
Brand New Massenza Hydraulic Crawler Drilling Rig Model Mi5 for Sale
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR2975

Derex 1340-14 DR (Dual Rotary) Drilling Rig for Sale
Drilling Rig - Derex 1340-14 DR - For Sale

Model : 1340-14 DR (Dual Rotary) Drill Rig
Manufacturer : Derex
Condition : New

Description :

Derex 1340-14 DR (Dual Rotary) Drill Rig
Truck
Peterbilt 567
Paccar 11 Litre
Allison 6 speed automatic
Air ride
Transfer Case
Namco (oilfield quality)
Safe Shift
Hydraulic System
Bosch Rexroth plus gear pump
Top Head
Variable torque and RPM with 2” thru-hole
0-125 rpm @ 3,500-lbf
Lower drive
Variable torque and RPM with 10” thru-hole
0-23 rpm @ 20,000-lbf
Diverter
Simple seal design with 4” NPT discharge
to control cuttings.
Derrick & Feed System
13ft top head stroke (handles 10ft x 3" OD drill pipe)
40,000-lbs pullback
20,000-lbs pulldown
100 FPM
Derrick slide/ dump
4ft Derrick slide for angles up to 45°
Main Winch
Manual jib
2,500 lb.
Remote on helpers side for winch
Control Panel
Straight hydraulic controls (no electrics to fail)
Marine grade electric switches (for lights)
Murphy engine monitor display
Twin platforms
Leveling Jacks
Four 36” stroke independently controlled
Night Lights
6 LED night lights
Toolboxes
30”x 18” x 18”
Overall Dimensions
Length: 24ft 11”
Width: 8ft 6”
Derrick up height: 24ft 6” – 28ft 6” with Derrick slide
Derrick down height: 11ft
Water Injection
9 gpm FMC injection pump
Gross Weight
34,000lbs - 36,000lbs
Casing
Diameter 4", 5" & 6" (with 8" & 10" option for surface casing)
Pre-Order Drill from EWDAdditional Options
4 – 6 Month Leadtime from Date Ordered
Sand Line Winch
1,500ft sand line
Mud Pump
3x2x13 centrifugal 300 gpm/300 psi
Centerline piston 150 gpm/600 psi
Air Compressor Options
Vanair / Sullair 600cfm / 250psi @ 1,800rpm
Vanair / Sullair 733cfm / 150psi @ 2,200 rpm
Line Oiler
Many oilers available
Water InjectionDrill Pipe Packages
18 gpm FMC injection pump
Wire Feeder and Box
Hydraulic or Gas Welders

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
New Derex 1340-14 DR (Dual Rotary) Drilling Rig for Sale
Derex 1340-14 DR Drilling Rig for Sale
New Derex 1340-14 DR Drilling Rig for Sale
Derex Land Drilling Rig for Sale
Derex 1340-14 DR (Dual Rotary) Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR2974

Derex 1340-14X DR (Dual Rotary) Drilling Rig for Sale
Drilling Rig - Derex 1340-14X DR - For Sale

Model : 1340-14X DR (Dual Rotary) Drill Rig
Manufacturer : Derex
Condition : New

Description :

Derex 1340-14X DR (Dual Rotary) Drill Rig
Truck
Acela Monterra 6×6
No Emission Controls
330HP Caterpillar 7.2L Turbo-Charged Diesel Engine
Full-Time All-Wheel Drive
Allison Automatic 7-Speed Transmission
U.S. Army “Ultra-Reliable” Certification
22″ Ground Clearance
Deck Motor
Cummins 6.7 litre 300 HP tier 4
Hydraulic System
Bosch Rexroth plus gear pump
Top Head
Variable torque and RPM with 2” thru-hole
0-125 rpm @ 3,500-lbf
Lower drive
Variable torque and RPM with 10” thru-hole
0-23 rpm @ 20,000-lbf
Diverter
Simple seal design with 4” NPT discharge
to control cuttings.
Derrick & Feed System
13ft top head stroke (handles 10ft x 3" OD drill pipe)
40,000-lbs pullback
20,000-lbs pulldown
100 FPM
Derrick slide/ dump
4ft Derrick slide for angles up to 45°
Main Winch
Manual jib
2,500 lb.
Remote on helpers side for winch
Control Panel
Straight hydraulic controls (no electrics to fail)
Marine grade electric switches (for lights)
Murphy engine monitor display
Twin platforms
Leveling Jacks
Four 36” stroke independently controlled
Night Lights
6 LED night lights
Toolboxes
30”x 18” x 18”
Overall Dimensions
Length: 24ft 11”
Width: 8ft 6”
Derrick up height: 24ft 6” – 28ft 6” with Derrick slide
Derrick down height: 11ft
Water Injection
9 gpm FMC injection pump
Gross Weight
28,000lbs - 30,000lbs
Casing
Diameter 4", 5" & 6" (with 8" & 10" option for surface casing)
Pre-Order Drill from EWDAdditional Options
4 – 6 Month Leadtime from Date Ordered
Sand Line Winch
1,500ft sand line
Mud Pump
3x2x13 centrifugal 300 gpm/300 psi
Centerline piston 150 gpm/600 psi
Air Compressor Options
Vanair / Sullair 600cfm / 250psi @ 1,800rpm
Vanair / Sullair 733cfm / 150psi @ 2,200 rpm
Line Oiler
Many oilers available
Water InjectionDrill Pipe Packages
18 gpm FMC injection pump
Wire Feeder and Box
Hydraulic or Gas Welders

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
New Derex 1340-14X DR (Dual Rotary) Drilling Rig for Sale
New Derex 1340-14X DR Drilling Rig for Sale
Derex 1340-14X DR Drilling Rig for Sale
New Derex Land Drilling Rig for Sale
Derex 1340-14X DR (Dual Rotary) Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR2973

Ardco K10 4X4 Drilling Rig for Sale
Ardco K10 4X4 Drilling Rig - 1974 Built for Sale

Model : K10 4X4 Drill Rig
Manufacturer : Ardco
Year : 1974
Condition : Used

Description :

1974 Ardco K10 4X4 Drill Rig
4X4 Carrier S/N: K420
Detroit 4-53T diesel engine (locked up does not run)
Eaton FS5005A 5 speed transmission
Winch on front
Drill is a predecessor to the C1000
Gear water/ grout pump
Large water tank
23.1-26 tires
Ardco top drive
Draw works is chain and sprocket drive hydraulic motor

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Drilling Rig - Ardco K10 4X4 - For Sale
1974 Built Ardco K10 4X4 Drilling Rig for Sale
Used Ardco K10 4X4 Drilling Rig for Sale
Ardco K10 4X4 Used Land Drilling Rig for Sale
Ardco K10 4X4 Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR810

Generic Bucket Style Drilling Rig for Sale
Drilling Rig - Generic Bucket Style - For Sale

Model : Bucket Style Drill Rig
Manufacturer : Generic
Condition : Used

Description :

Bucket Style Drill Rig
Detroit Diesel Deck Engine
Mounted in a 1984 International 4370 Series truck
Tandem Axle
Cummins Diesel Truck Engine
Note: Bill of sale only (no-title) & Selling "as is, where-is".

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Used Generic Bucket Style Drilling Rig for Sale
Used Generic Drilling Rig for Sale
Generic Land Drilling Rig for Sale
Generic Bucket Style Used Drilling Rig for Sale
Generic Bucket Style Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR2972

Derex 1340-16 DR (Dual Rotary) Drilling Rig for Sale
Drilling Rig - Derex 1340-16 DR - For Sale

Model : 1340-16 DR (Dual Rotary) Drill Rig
Manufacturer : Derex
Condition : Used

Description :

Derex 1340-16 DR (Dual Rotary) Drill Rig
Truck
Peterbilt 520
Paccar 13 Litre.
Allison 6 speed automatic
Air ride
Transfer Case
Namco (oilfield quality)
Safe Shift
Hydraulic System
Bosch Rexroth plus gear pump
Top Head
Variable torque and RPM with 2” thru-hole
0-125 rpm @ 3,500-lbf
Lower drive
Variable torque and RPM with 10” thru-hole
0-23 rpm @ 20,000-lbf
Diverter
Simple seal design with 4” NPT discharge
to control cuttings.
Derrick & Feed System
13ft top head stroke (handles 10ft x 3" OD drill pipe)
40,000-lbs pullback
20,000-lbs pulldown
100 FPM
Derrick slide/ dump
4ft Derrick slide for angles up to 45°
Main Winch
Manual jib
2,500 lb.
Remote on helpers side for winch
Control Panel
Straight hydraulic controls (no electrics to fail)
Marine grade electric switches (for lights)
Murphy engine monitor display
Twin platforms
Leveling Jacks
Four 36” stroke independently controlled
Night Lights
6 LED night lights
Toolboxes
30”x 18” x 18”
Overall Dimensions
Length: 24ft 11”
Width: 8ft 6”
Derrick up height: 24ft 6” – 28ft 6” with Derrick slide
Derrick down height: 11ft
Water Injection
9-GPM FMC injection pump
Gross Weight
36,000lbs - 38,000lbs
Casing
Diameter 4", 5" & 6" (with 8" & 10" option for surface casing)
Pre-Order Drill from EWDAdditional Options
4 – 6 Month Leadtime from Date Ordered
Sand Line Winch
1,500ft sand line
Mud Pump
3x2x13 centrifugal 300 gpm/300 psi
Centerline piston 150 gpm/600 psi
Air Compressor
Vanair / Sullair 900cfm / 350psi
Line Oiler
Many oilers available
Water InjectionDrill Pipe Packages
18 gpm FMC injection pump
Wire Feeder and Box
Hydraulic or Gas Welders

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Used Derex 1340-16 DR (Dual Rotary) Drilling Rig for Sale
Derex 1340-16 DR Used Drilling Rig for Sale
Derex Drilling Rig for Sale
Derex 1340-16 DR Drilling Rig for Sale
Derex 1340-16 DR (Dual Rotary) Drilling Rig for Sale in USA
--------------------------------------------------------------------------------------------------------------------------

Worldrigs ID: WR2971

Derex 2630-22 Arthur Drilling Rig for Sale
Drilling Rig - Derex 2630-22 Arthur for Sale

Model : 2630-22 Arthur (Air/Rotary/Top/Head) Drill Rig
Manufacturer : Derex
Condition : Used

Description :

Derex 2630-22 Arthur (Air – Rotary – Top – Head) Drill Rig
Truck
Peterbilt 567
Paccar 13 Litre.
Allison 6 speed automatic
Air ride
Transfer Case
Namco (oilfield quality)
Safe Shift
Hydraulic System
Sundstrand, Bosch Rexroth plus gear pump
Top Head
Variable torque and RPM with 2” thru-hole
0-160 rpm @ 8,000-lbf torque
Derrick & Feed System
26ft top head stroke
30,000-70,000 lbs pullback
20,000-lbs pulldown
120 FPM
Air Compressor
Vanair/ Sullair 750 cfm / 350 psi @ 1,800 rpm and
1050 cfm / 350 psi @ 2,200 rpm
Main Winch
12,000 lbs
Hydraulic 135° jib
2,500 lbs
Remote on helpers side for winch
Control Panel
Straight hydraulic controls (no electrics to fail)
Marine grade electric switches (for lights)
Murphy engine monitor display
Twin platforms
Leveling Jacks
Four 36” stroke independently controlled
Night Lights
6 LED night lights
Toolboxes
30”x 18” x 18”
Overall Dimensions
Length: 38ft
Width: 8ft 6”
Derrick up height: 42ft
Derrick down height: 13ft 4”
Water Injection
9-GPM FMC injection pump
Gross Weight
44,000lbs - 46,000lbs
Pre-Order Drill from EWDAdditional Options
4 – 6 Month Leadtime from Date Ordered
Sand Line Winch
1,500ft sand line
Mud Pump
3x2x13 centrifugal 300 gpm/300 psi
Centerline piston 150 gpm/600 psi
Line Oiler
Many oilers available
Water InjectionOffsyder Rod Handling System
18 gpm FMC injection pump
Drill Pipe Packages
Wire Feeder and Box
Hydraulic or Gas Welders

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Used Derex 2630-22 Arthur Drilling Rig for Sale
Derex 2630-22 Arthur Used Drilling Rig for Sale
Derex Arthur Drilling Rig for Sale
Derex Used Land Drilling Rig for Sale
Derex 2630-22 Arthur Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR2970

Derex 2630-22 MATH Drilling Rig for Sale
Drilling Rig - Derex 2630-22 MATH - For Sale

Model : 2630-22 MATH (Mud/Air/Top/Head) Drill Rig
Manufacturer : Derex
Condition : Used

Description :

Derex 2630-22 MATH (Mud – Air – Top – Head) Drill Rig
Truck
Peterbilt 567
Paccar 13 Litre.
Allison 6 speed automatic
Air ride
Transfer Case
Namco (oilfield quality)
Safe Shift
Hydraulic System
Sundstrand, Bosch Rexroth plus gear pump
Top Head
Variable torque and RPM with 2” thru-hole
0-160 rpm @ 8,000-lbf torque
Derrick & Feed System
26ft top head stroke
30,000-70,000 lbs pullback
20,000-lbs pulldown
120 FPM
Main Winch
12,000 lbs
Hydraulic 135° jib
Remote on helpers side for winch
Control Panel
Straight hydraulic controls (no electrics to fail)
Marine grade electric switches (for lights)
Murphy engine monitor display
Twin platforms
Leveling Jacks
Four 36” stroke independently controlled
Night Lights
6 LED night lights
Toolboxes
30”x 18” x 18”
Overall Dimensions
Length: 38”
Width: 8ft 6”
Derrick up height: 42ft
Derrick down height: 13ft 4”
Water Injection
9-GPM FMC injection pump
Gross Weight
44,000lbs - 46,000lbs
Pre-Order Drill from EWDAdditional Options
4 – 6 Month Leadtime from Date Ordered
Sand Line Winch
1,500ft sand line
Mud Pump
3x2x13 centrifugal 300 gpm/300 psi
Centerline piston 150 gpm/600 psi
Line Oiler
Many oilers available
Water InjectionOffsyder Rod Handling System
18 gpm FMC injection pump
Drill Pipe Packages
Wire Feeder and Box
Hydraulic or Gas Welders

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Used Derex 2630-22 MATH Drilling Rig For Sale
Derex 2630-22 MATH Used Drilling Rig For Sale
Derex Land Drilling Rig For Sale
Used Derex Land Drilling Rig For Sale in USA
Derex 2630-22 MATH Drilling Rig For Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR2631

Chicago Pneumatic 670 Drilling Rig for Sale
1976 Built Chicago Pneumatic 670 Drilling Rig for Sale

Model : 670 Drill Rig
Manufacturer : Chicago Pneumatic
Year : 1976
Condition : Used

Description :

1976 Chicago Pneumatic 670 Drill Rig
CAT 3406 Diesel Deck Engine
800 cfm / 200 psi Screw type Air Compressor
Mounted on a 1976 GMC 7500 Truck
Detroit V6 Diesel Engine
Note: Tower is Broken & Jack Cylinders Need Rebuilt

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Drilling Rig - Chicago Pneumatic 670 - For Sale
Chicago Pneumatic 670 Drilling Rig - 1976 Built for Sale
Used Chicago Pneumatic 670 Drilling Rig for Sale
Chicago Pneumatic Used Land Drilling Rig for Sale
Chicago Pneumatic 670 Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR757

Schramm T450M Drilling Rig for Sale
Schramm T450M Drilling Rig - 2005 Built - For Sale

Model : T450M Drill Rig
Manufacturer : Schramm
Year : 2005
Condition : Used

Description :

2005 Schramm T450M Drill Rig
Note: Set up for core drilling
Mounted to a 2006 AWD International Truck
10-speed transmission
300 HP DT466 with 7400 miles
Sullair 300 cfm / 200 psi air compressor (locked up)
5 x 6 Gardner Denver mud pump
Moyno pump
Centrifugal pump
Winch
Sand line
UDR KL400
Sandvik hands-free table
Have table bushings and breakout fork for normal rod
Rod loader
Rig was used for core drilling but no core barrels included

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
2005 Built Schramm T450M Drilling Rig for Sale
Drilling Rig - Schramm T450M - For Sale
Used Schramm T450M Drilling Rig for Sale
Schramm Used Land Drilling Rig for Sale
Schramm T450M Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR1387

Ingersoll-Rand TH55 Drilling Rig for Sale
Drilling Rig - Ingersoll-Rand TH55 - For Sale

Model : TH55 Drill Rig
Manufacturer : Ingersoll-Rand
Year : 1979
Condition : Used

Description :

1979 Ingersoll-Rand TH55 Drill Rig
Water Well / Geothermal Drill Rig
50SDS (piston) Air Compressor (approximately 200 CFM)
3x4 centrifugal mud pump
Mounted on a International Truck
DT466 diesel engine with roadranger transmission
and passenger side fender flare missing), but engine runs
Drill will need new kelly hose, some hydraulic hoses and likely some other
things but dont currently have detailed condition report available
Comes with 300 ft. of drill pipie (20 ft lengths x 3-1/2” OD x
2-3/8 ft IF threads) 3-1/2” OD x 2-3/8” IF), also comes with a
couple stabilizers, suction hose, etc

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
1979 Built Ingersoll-Rand TH55 Drilling Rig for Sale
Ingersoll-Rand TH55 Drilling Rig - 1979 Built for Sale
Used Ingersoll-Rand TH55 Drilling Rig for Sale
Used Ingersoll-Rand Land Drilling Rig for Sale
Ingersoll-Rand TH55 Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR760

Driltech D40K Drilling Rig for Sale
Drilling Rig - Driltech D40K - For Sale

Model : D40K Drill Rig
Manufacturer : Driltech
Year : 1993
Condition : Used

Description :

1993 Driltech D40K Drill Rig
Caterpillar 3408 diesel deck engine
Sullair 1000 cfm / 350 psi Air Compressor (valve issues)
50,000 lbs of pullback
Water Injection Pump 4 cylinder
Hammer Lubricator
1000 ft of 4-1/2" x 25 ft of used drill pipe included
8" hammer, petol wrench, control cover, & sling for rods included
Mounted on Mack Truck
Rated 300 HP with Jake Brakes
All new tires installed late 2023

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
1993 Built Driltech D40K Drilling Rig for Sale
Driltech D40K Drilling Rig - 1993 Built for Sale
Used Driltech D40K Drilling Rig for Sale
Driltech D40K Used Land Drilling Rig for Sale
Driltech D40K Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR644

Driltech D35K Drilling Rig for Sale
Drilling Rig - Driltech D35K - For Sale

Model : D35K Drill Rig
Manufacturer : Driltech
Year : 1991
Condition : Used

Description :

1991 Driltech D35K Drill Rig
850 CFM / 350 PSI Air Compressor
Caterpillar 3406 diesel deck engine (has issues as machine has been parked for 5
years)
35,000 lbs of pullback
22" table opening
Included 23 pieces of 20ft x 4-1/2" OD drill pipe.
Mounted on a Ford L8000 truck
diesel engine

Location : Western Europe

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Driltech D35K Drilling Rig - 1991 Built for Sale
1991 Built Driltech D35K Drilling Rig for Sale
Used Driltech D35K Drilling Rig for Sale
Driltech Used Drilling Rig for Sale
Driltech D35K Drilling Rig for Sale in Western Europe
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR1206

Sandvik T1000 BH Drilling Rig - For Sale
Drilling Rig - Sandvik T1000 BH - For Sale

Model : T1000 BH Drill Rig
Manufacturer : Sandvik
Year : 2006
Condition : Used

Description :

2006 Sandvik / Driltech T1000 Drill Rig - S/N: 732989
BH (Blasthole drilling)
CAT C15 Diesel Deck Engine - (3300 hours since rebuilt)
Sullair 1000 cfm / 350 psi Air Compresser - (5,000 hours since rebuilt)
Carousel (handles 4-1/2" drill pipe)
2 Piston Water injection pump
1 Rod Winch
Hammer Oilier
Hydraulic Leveling Jacks
Mounted on a Sterling Truck
Mercedes Benz Diesel Engine
8LL Transmission
Paint Job in 2016
Very Good Tires
37ft L x 8ft 6" W x 13ft 2" H & estimated 54,000 LBS weight

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Sandvik T1000 BH Drilling Rig - 2006 Built for Sale
2006 Built Sandvik T1000 BH Drilling Rig for Sale
Used Sandvik T1000 BH Drilling Rig for Sale
Sandvik T1000 BH Used Drilling Rig for Sale
Sandvik T1000 BH Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR183

Speedstar 1500 Drilling Rig for Sale
Drilling Rig - Speedstar 1500 - For Sale

Model : 1500 Drill Rig
Manufacturer : Speedstar
Year : 1976
Condition : Used

Description :

1976 Speedstar 1500 Drill Rig
with 22 Draw works
Combo Air/Mud
Top Head Drive Drilling Rig
Mounted on a 1976 Ford 9000 (5 Ton) Truck - (Serial # U91VVC16817)
Cummins Diesel Engine & 5" X 6°
Gardner Denver Mud Pump
500 CFM X 250# Air Compressor Truck Mounted - (J. L. Beeman)
With the following Auxiliary Equipment:
100 Ft. 3-1/2" Air Drill Collars -- (Rex McFadden Ltd./Atlas machine)
Shop Made Subs & Collars - (Owens Machine)
10 Stabilizer - (Rex McFadden/ Atlas Machine)
900 FL 3" (Range 1) Air Drill Pipe - (J. L. Beeman)
5-1/2" Rock Hound Air Hammer with High Pressure &
Low Pressure Piston/ 6-1/2" Bit - (Rock Hound)
Lil Darlin Blow Out Preventer - (Mauldin Sales)
Single Axle Shop Made 10° Trailer with Dog House
with Junk Basket - (Mauldin Sales)
Single Axle Shop Made 12° Trailer Mud House - (Mauldin Sales)
1965 Model Shop Made 3 X 7,000# Axles X 20ft Drill Pipe
Trailer VIN # TRI48964 - (Sojourher Drilling)

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
1976 Built Speedstar 1500 Drilling Rig for Sale
Speedstar 1500 Drilling Rig - 1976 Built for Sale
Used Speedstar 1500 Drilling Rig for Sale
1976 Built Speedstar Land Drilling Rig for Sale
Speedstar 1500 Drilling Rig for Sale in USA
---------------------------------------------------------------------------------------------------------

Worldrigs ID: WR2504

Ingersoll-Rand T3W Drilling Rig for Sale
1990 Built Ingersoll-Rand T3W Drilling Rig for Sale

Model : T3W Drill Rig
Manufacturer : Ingersoll-Rand
Year : 1990
Condition : Used

Description :

1990 Ingersoll-Rand T3W Drill Rig
Cummins 855 Diesel Deck Engine (200+ hours since rebuilt)
IR 825 cfm / 350 psi air compressor
(6) of 20ft x 4-1/2" drill pipe included
Myers water injection
Hammer lubricator
Hydraulic Leveling Jacks
Mounted on a Ford L9000 Truck
Cummins L10 Diesel Engine - rated 300 horsepower

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Used 1990 Built Ingersoll-Rand Drilling Rig for Sale
Drilling Rig - Ingersoll-Rand T3W - For Sale
Ingersoll-Rand T3W Drilling Rig - 1990 Built for Sale
Used Ingersoll-Rand T3W Drilling Rig for Sale
Ingersoll-Rand Land Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR1423

Atlas Copco RD20 Range III Drilling Rig for Sale
Drilling Rig - Atlas Copco RD20 Range III - For Sale

Model : RD20 III Drill Rig
Manufacturer : Atlas Copco
Year : 2007
Condition : Used

Description :

2007 Atlas Copco RD20 Range III Drill Rig - S/N# 21103
Ingersoll-Rand 1250 cfm / 350 psi Air Compressor
Cummins QSK19 Diesel Deck Engine
30,000 lbs Pulldown
120,000 lbs Pullback Capacity
No Carousel
Hydraulic Utility Winches
(5) Hydraulic Leveling Jacks
4 Piston Bean Water Injection Pump
Drillers Control
Mounted on a CCC (Crane Carrier Company) 5-Axle Carrier with Single Man CAB
VIN: 1CYDGV5887T047843
C-13 Diesel Engine
Eaton 8 Speed Transmission
Shows 15,821 Odometer Miles

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
2007 Built Atlas Copco RD20 Range III Drilling Rig for Sale
Used Atlas Copco RD20 Range III Drilling Rig for Sale
Atlas Copco RD20 Range III Drilling Rig - 2007 Built for Sale
Atlas Copco RD20 Range III Used Land Drilling Rig for Sale
Atlas Copco RD20 Range III Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR79

Schramm T64HB Drilling Rig for Sale
Drilling Rig - Schramm T64HB - For Sale

Model : T64HB Drill Rig
Manufacturer : Schramm
Condition : Used

Description :

Schramm T64HB Drill Rig
GHH 750 cfm / 300 psi Air Compressor (recently overhauled)
Detroit 8V92 Diesel Deck Engine
Mounted on a Ford Truck
Diesel Engine
Notes : Top head is good hydraulic motors overhauled in 2022
Overall fair working condition

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Used Schramm T64HB Drilling Rig for Sale
Schramm Used Drilling Rig for Sale
Schramm T64HB Used Drilling Rig for Sale
Schramm T64HB Land Drilling Rig for Sale
Schramm T64HB Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR1479

Schramm T64HB Drilling Rig for Sale
Drilling Rig - Schramm T64HB - For Sale

Model : T64HB Drill Rig
Manufacturer : Schramm
Condition : Used

Description :

Schramm T64HB Drill Rig - S/N: T64HB-622
Detroit 8V71 diesel deck engine
450 CFM / 250PSI piston air compressor
3 cylinder Water injection pump
(3) leveling jacks
Pipe Rack
300 ft. of used CP style 20ft x 4-1/2" Drill Rods Included
Mounted on a 1973 GMC 6500 Truck
C70 with a gas engine

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Used Schramm T64HB Drilling Rig for Sale
Schramm T64HB Used Drilling Rig for Sale
Schramm T64HB Land Drilling Rig for Sale
Schramm T64HB Drilling Rig for Sale in USA
Schramm Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR1417

CME 55 Drilling Rig for Sale
Drilling Rig - CME 55 - For Sale

Model : 55 Drill Rig
Manufacturer : CME Drill
Year : 1978
Condition : Used

Description :

CME 55 Drill Rig - Serial Number: 130085
Moyno-type Water Pump
Cathead
Winch
Auto Hammer Driver installed by CME
Ford Gas Deck Engine
Hydraulic operator controls
Hydraulic Leveling Jacks
Mounted on single-axle 1978 International 1600 truck - VIN: D0512HHB33188
Gas engine
manual transmission

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
1978 Built CME 55 Drilling Rig for Sale
Used CME 55 Drilling Rig for Sale
CME 55 Drilling Rig - 1978 Built for Sale
1978 Built CME 55 Used Drilling Rig for Sale
CME 55 Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Worldrigs ID: WR622

VFD Land Drilling Rig for Sale
Chinese 2000HP Land Rig
Land Rig Builders (China) - 2000hp

General description :
Rig type : ZJ70 rig
Rig rated dept : 6000m (127mm DP) ~7000 (114mm DP)
Traveling system : 6 x 7 (sheaves), parallel
Available height of derrick : 150 ft
Rig floor dimension / height of drilling floor : 42ft x 40ft / 30ft
Opening diameter of rotary table : 952.5mm (37 1/2 inch)
Rated input power of drawworks : 2680 hp or 2000kW
Capacity of mud pump : 3 x 1600 hp
Power transfer type : AC-VFD-AC

Drilling equipment :
Mast :
Model : JJ450/45-K11 :
Type II consist of five sections, 150 ft clear height
Top span (front x side) 2.2 m x 2.2 m
Bottom span (front x side) 9 m x 2.7 m
Max hook load 450t or 1,210,000 lbs

Drawworks :
2680 hp or 2000 kW
Driven by two AC VF motor
Max pull fast line : 485 kn (110,000 lbs)
Wire rope : F38mm
Air cool hydraulic disc brake : PS80

Crown block :
Model : TC450-7
Max hook load : 4500 kn (450t)
OD of sheave : 1524 mm
Diameter of drilling line : F38mm
No of sheaves : 7
No of sand line sheave : 1
Diameter of sand line : F14.5mm

Traveling block :
Model : YC450
Max static load : 4500 kn (450t)
OD of sheave : 1524mm
No of sheave : 6

Rotary table :
Model : ZP375
Table opening diameter : 37 1/2"
Max static load : 5850 kn
Max speed : 300 rpm
Rate power : 600 volt
Gear ratio : 3.56

Top drive :
Model : NOV/TDS-11SA/Electrical/800 hp
Hoisting capacity : 500 t
Output torque continuous : 37,500 ft-lbs (800hp)
Tool torque (intermittent @ stall) : 55,000 ft-lbs
Max speed : 228 rpm
Drilling motor : AC 575 VAC (2 x 400 hp)
Make up torque : 47,000 ft-lbs
Break out torque : 55,000 ft-lbs

Mud pumps :
Model : HHF-1600
Input power : 1600 hp (1176 kW)
Max cylinder diameter : 7" or F180mm
Length of stroke : 12" or 305mm
Rate no. of stroke : 120 spm
Three triplex single acting piston, HHF-1600

Solid control :
Shale shaker : Derrick FLC-503/rated 60L/s
Desander : DSV-10-3/rated 1280 gpm
Desilter : S-416-S/rated 1280 gpm
Mud cleaner : Derrick FLC-503-3P

Mud tank :
2,500 bbls

Generator :
Type : SR4B
No. of gen. : 04 set (01 back up)
Capacity : 1750 kva
Rate voltage : 600 vac

AC distribution / transformer :
ABB/AC S800
Transformer SUNTEN/ SC B9-1600, 600 vac/380 vac

Emergency generator : 1 set CAT C15
Diesel : 4 set CAT3512B

BOP stack :
21 1/4" BOP 2,000 wp including :
01 annular 5,000 wp
01 double ram 2,000 wp
13 5/8" BOP 10,000 wp including :
01 annular 5,000 wp
01 double ram 10,000 wp
01 single ram 10,000 wp
Comply with lifting BOP swl : 2 x 25 ton

Warranty :
Guarantee period shall last for 18 months counting from the delivery date
or 12 months from the commencement of operation at the well site,
which expiration date comes earlier/

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------------------------------------------
Search words(for official use only) - 
VFD Land Drilling Rig for Sale
2000hp Land Drilling Rig From China
Chinese Rig Builders
Chinese 2000hp Land Rig Builders
New 2000hp Chinese Rig
2000hp VFD Land Rig
2000hp new Land Rig From China
New 2000hp Chinese Drilling Rig
-------------------------------------------------------------------------------------------------------------------------------

Worldrigs ID: WR2946

Bucyrus Erie 22W Series II Cable Tool Rig for Sale
Bucyrus Erie Cable Tool Rig for Sale

Model : 22W Series II Cable Tool Rig
Manufacturer : Bucyrus Erie
Condition : Used

Bucyrus Erie 22W Series II Cable Tool Rig
Mounted on 1989 International S1800
4x4 Truck
New Cable
New Drill Line
Basic Tooling Included (6" & 8" Bits)

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Cable Tool Rig - Bucyrus Erie 22W Series II - for Sale
Used Bucyrus Erie 22W Series II Cable Tool Rig for Sale
Bucyrus Erie Used Cable Tool Rig for Sale
Bucyrus Erie 22W Series II Cable Tool Rig for Sale in USA
Used Cable Tool Rig for Sale
-------------------------------------------------------------------------------------------------------