Oil & Gas land drilling rigs for sale, Land drilling rigs for sale
Home Biofuels Oil & Gas Directory Glossary Training News Newsletter Events LDPE Recycling Contact Water Well Rigs
Land Drilling Rigs Jackup Rigs Oilfield Container Camps Offshore Accommodation Steel Houses Mini Submarines Oil & Gas Equipment Marketplace
Home Biofuels Oil & Gas Directory Glossary Training News
Newsletter Events Contact Water Well Rigs Land Drilling Rigs
Jackup Rigs LDPE Recycling Oilfield Container Camps Crude Oil Price History
Steel Houses Mini Submarines Oil & Gas Equipment Marketplace
Home Jackup Rigs LDPE Recycling
News Water Well Rigs Land Drilling Rigs
Mini Submarines Events Steel Houses
Oilfield Container Camps Oil & Gas Directory
Oil & Gas Equipment Marketplace Contact


 

If you cannot find the new or used offshore rigs, vessels or equipment of any type, size or make that you are looking for, please send us an email to and we shall offer you.


 

If you cannot find the new or used offshore rigs, vessels or equipment of any type, size or make that you are looking for, please send us an email to and we shall offer you.


Gas Powered CHP Power Plant for Sale
Worldoils Oil, Gas and Offshore Marketplace    

Equipment ID   : 1933
Equipment name   : Gas Powered CHP Power Plant for Sale
Category   : Miscellaneous Equipment
Specifications   : Gas Powered CHP Power Plant for Sale
Power Plant for Sale - 1995-96 Built



Description :

Gas powered CHP power plant was built in 1995-1996 and commissioned in 1997. The plant
is based around a GE LM6000PA aero-derivative gas turbine. The gas turbine can supply up
to 42 Megawatts of energy with an additional 7 Megawatts being supplied from a Siemens
back-pressure steam turbine. In addition, the plant can continuously supply up to 105 tonnes
per hour of steam with short term peak capacity of 120 tonnes per hour of steam.

The gas turbine exhausts into a Nooter Erikson heat recovery steam generator (HRSG) but
also has the option to exhaust directly to the atmosphere through a blast stack. This enables
the gas turbine to be run in open cycle mode if the HRSG is not available. The HRSG has
supplementary gas burners which can be run in addition to the gas turbine or can be run
without the gas turbine by using forced draft (FD) fans to supply combustion air. This adds
considerable flexibility to the plant.

Boiler discharge pressure is 32 barg. It is then run through the Steam Turbine to give a pressure
of 4.4 barg which is used in the mill. Both the gas turbine and steam turbine alternators
are rated at 11 kV, 50 Hz.

Total Hours (approx.): 100,983
Hours Since Last Major Overhaul: 49,869
Hours Since Last Hot End Overhaul: 14,903

A summary of power and steam production while fully operating is available!

Equipment List
- 1 x General Electric (GE) model LM6000PA Gas Turbine (GT) with water injection coupled
to a Brush alternator rated at 42 MW output. The GT is capable of being fired by natural
gas or distillate fuel.
- 1 x GT MK V control unit and associated auxiliary systems.
- 1 x Nooter Erikson Heat Recovery Steam Generator (HRSG) which is heated by the
exhaust gas from the GT and capable of supplementary firing with natural gas or
distillate fuel. Maximum steam output 105 tne steam/hour.
- 1 x Water treatment plant consisting of two 100% twin bed resin exchange units and two
mixed bed units (for GT water injection) complete with all auxiliary systems including
chemical storage and effluent tanks.
- 1 x Siemens back pressure steam turbine driven generator set rated at 7 MW output.
- 2 x Bellis and Morcom 3 stage reciprocating natural gas compressors, operated as
one running unit and a spare.
- 2 x 11/11 kV transformers, each rated at 30 MVA.
- 1 x Serck Distributed Control System (DCS).
- 3 x Control and general service air compressors.
- 1 x Boiler chemical dosing system.
- 1 x CBISS Continuous Emissions Monitoring System (CEMS) for monitoring and
recording stack gas emissions.
- 1 x Cooling tower complete with dump condenser cooling water pumps dosing systems
and auxiliaries. (Sale to be reviewed in final negotiation)
- 1 x installed fire detection and suppression system.
- 1 x installed gas detection system.
- All MP and LP steam pressure reducing stations and associated equipment.
- All installed cabling, transformers and switchgear associated with the above mentioned
plant. Cabling removal shall be agreed by a responsible IPWL electrical person. Metering
equipment which can be removed shall be agreed by a responsible IPWL person.
- Spare parts unique to the machinery scope as available.
- Extensive manuals, records and drawings as available.

Additional Items :
Four Nash Vacuum Pumps: model CL3002
Three Nash Vacuum Pumps: model CL 3001
Three inline Beloit Lussane Magnetic Traps Series 503 with stainless bodies dimensions:
- One Large Trap: Pipe Flanges – internal diameter 300mm, outer diameter 440mm.
- Two Small Traps: Pipe Flanges – internal diameter 200mm, outer diameter 340mm.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------
Search words (for official use only) :
Gas Powered CHP Power Plant for Sale
CHP Power Plant for Sale
Power Plant Built 1995-1996
Gas Powered CHP Power Plant Commissioned in 1997

-------------------------------------------------------------------------------------------

 

     
Worldoils Oil, Gas and Offshore Marketplace
Worldoils Oil, Gas and Offshore Marketplace - Gas Powered CHP Power Plant for Sale
Images
 
Gas Powered CHP Power Plant for Sale';
 
Power Plant for Sale';
 
Gas Powered CHP Power Plant Built 1995-96';
 
Gas Powered Power Plant ';
 
1995-96 Built Gas Powered Power Plant ';
 

Send an email to Worldoils
Note: Fields marked by (*) are mandatory.
Email to:  Worldoils
For equipment:  Gas Powered CHP Power Plant for Sale
Category:  Miscellaneous Equipment
Your name:  *
Your company:  *
Your email address:  *
Your phone no.:  *
Your message:  *
Security code:
* (Use capital letters only)

 

The information contained herein is believed to be accurate but has not been verified. This equipment is subject to prior sale and sold “where-is as-is” with no warranties from Worldoils Pte Ltd or the Seller expressed or implied.
Worldoils Oil, Gas and Offshore Marketplace    Worldoils Oil, Gas and Offshore Marketplace


Vessel Monitoring Software
Offsore Rig Monitoring Software
Mobile Hospitals
Field Hospitals
LDPE Recycling

Live Monitoring of Ships and rigs

Oilfield Container Camps

Remote ship Bunker GFuel Monitoring

Mini Submarine

Ring Maintenance Software

Mining Container Camps
Offshore Jackup Rigs
Land Drilling Rigs
Barge  Swamp Rigs

Oil & Gas Industry Machinery & Equipment Marketplace
Generic Bucket Style Drilling Rig - For Sale
Derex 1340-12X DR (Dual Rotary) Drilling Rig - For Sale
Brand New Massenza Hydraulic Drilling Rig Model Mi8 Mounted On Tracks (Crawler)
Brand New Massenza Hydraulic Drilling Rig Model Mi5 Mounted On Tracks (Crawler)
Derex 1340-14 DR (Dual Rotary) Drilling Rig - For Sale
Derex 1340-14X DR (Dual Rotary) Drilling Rig - For Sale
Ardco K10 4X4 Drilling Rig - For Sale
Derex 1340-16 DR (Dual Rotary) Drilling Rig - For Sale
Derex 2630-22 Arthur Drilling Rig - For Sale
Derex 2630-22 MATH Drilling Rig - For Sale
Diedrich HD D-50 Track Drilling Rig - For Sale
Schramm T450M Drilling Rig - For Sale
Chicago Pneumatic 670 Drilling Rig - For Sale
Ingersoll-Rand TH55 Drilling Rig - For Sale
Ingersoll-Rand DM50 Crawler Drilling Rig - For Sale
Driltech D40K Drilling Rig - For Sale
Driltech D35K Drilling Rig - For Sale
DeltaBase 430 Drilling Rig Package - For Sale
Sandvik T1000 BH Drilling Rig - For Sale
Chutes for guiding of wire from vessel to Sea - For Rent
Speedstar 1500 Drilling Rig - For Sale
Chocks for Deck mounting - For Rent
Failing 1500 Holemaster Drilling Rig - For Sale
Schramm T64HB Drilling Rig - For Sale
Pipelaying barge 112M For sale
Worldoils Land Rigs Market
1000hp Land Drilling Rigs
1500hp Rotary Land Drilling Rigs
2000hp Rotary Land Drilling Rigs
3000hp Rotary Land Drilling Rigs
Workover Land Rigs
Carrier Mounted Land Drilling Rigs
Trailer Mounted Land Drilling Rigs
Worldoils
Events Subsystem
Oil, Gas & Biofuels Events
15 - Apr - 2024 : Singapore
Singapore Maritime Week 2024 (SMW 2024) [Map]

16 - Apr - 2024 : Singapore
15th SCADA World Summit 2024 [Map]

17 - Apr - 2024 : Kuala Lumpur
MTB Marine Asia 2024 [Map]

19 - Apr - 2024 : Singapore
1st GREEN4SEA Singapore Forum [Map]

22 - Apr - 2024 : Muscat
Oman Petroleum & Energy Show (OPES) [Map]

22 - Apr - 2024 : New Orleans, Louisiana
International Partnering Forum 2024 [Map]

22 - Apr - 2024 : Singapore
Argus Biofuels & Feedstocks Asia Conference [Map]

23 - Apr - 2024 : Houston
Horizontal Drilling Automation & Advanced Technologies 2024 [Map]

23 - Apr - 2024 : Manila
3rd SAFETY4SEA Manila Forum [Map]

25 - Apr - 2024 : Istanbul
Argus Coal 2024 [Map]


 

 

If you cannot find the new or used offshore rigs, vessels or equipment of any type, size or make that you are looking for, please send us an email to and we shall offer you.

Gas Powered CHP Power Plant for Sale
Worldoils Oil, Gas and Offshore Marketplace    
Worldoils Oil, Gas and Offshore Marketplace

Equipment ID   : 1933
Equipment name   : Gas Powered CHP Power Plant for Sale
Category   : Miscellaneous Equipment
 
Specifications  :
Gas Powered CHP Power Plant for Sale
Power Plant for Sale - 1995-96 Built



Description :

Gas powered CHP power plant was built in 1995-1996 and commissioned in 1997. The plant
is based around a GE LM6000PA aero-derivative gas turbine. The gas turbine can supply up
to 42 Megawatts of energy with an additional 7 Megawatts being supplied from a Siemens
back-pressure steam turbine. In addition, the plant can continuously supply up to 105 tonnes
per hour of steam with short term peak capacity of 120 tonnes per hour of steam.

The gas turbine exhausts into a Nooter Erikson heat recovery steam generator (HRSG) but
also has the option to exhaust directly to the atmosphere through a blast stack. This enables
the gas turbine to be run in open cycle mode if the HRSG is not available. The HRSG has
supplementary gas burners which can be run in addition to the gas turbine or can be run
without the gas turbine by using forced draft (FD) fans to supply combustion air. This adds
considerable flexibility to the plant.

Boiler discharge pressure is 32 barg. It is then run through the Steam Turbine to give a pressure
of 4.4 barg which is used in the mill. Both the gas turbine and steam turbine alternators
are rated at 11 kV, 50 Hz.

Total Hours (approx.): 100,983
Hours Since Last Major Overhaul: 49,869
Hours Since Last Hot End Overhaul: 14,903

A summary of power and steam production while fully operating is available!

Equipment List
- 1 x General Electric (GE) model LM6000PA Gas Turbine (GT) with water injection coupled
to a Brush alternator rated at 42 MW output. The GT is capable of being fired by natural
gas or distillate fuel.
- 1 x GT MK V control unit and associated auxiliary systems.
- 1 x Nooter Erikson Heat Recovery Steam Generator (HRSG) which is heated by the
exhaust gas from the GT and capable of supplementary firing with natural gas or
distillate fuel. Maximum steam output 105 tne steam/hour.
- 1 x Water treatment plant consisting of two 100% twin bed resin exchange units and two
mixed bed units (for GT water injection) complete with all auxiliary systems including
chemical storage and effluent tanks.
- 1 x Siemens back pressure steam turbine driven generator set rated at 7 MW output.
- 2 x Bellis and Morcom 3 stage reciprocating natural gas compressors, operated as
one running unit and a spare.
- 2 x 11/11 kV transformers, each rated at 30 MVA.
- 1 x Serck Distributed Control System (DCS).
- 3 x Control and general service air compressors.
- 1 x Boiler chemical dosing system.
- 1 x CBISS Continuous Emissions Monitoring System (CEMS) for monitoring and
recording stack gas emissions.
- 1 x Cooling tower complete with dump condenser cooling water pumps dosing systems
and auxiliaries. (Sale to be reviewed in final negotiation)
- 1 x installed fire detection and suppression system.
- 1 x installed gas detection system.
- All MP and LP steam pressure reducing stations and associated equipment.
- All installed cabling, transformers and switchgear associated with the above mentioned
plant. Cabling removal shall be agreed by a responsible IPWL electrical person. Metering
equipment which can be removed shall be agreed by a responsible IPWL person.
- Spare parts unique to the machinery scope as available.
- Extensive manuals, records and drawings as available.

Additional Items :
Four Nash Vacuum Pumps: model CL3002
Three Nash Vacuum Pumps: model CL 3001
Three inline Beloit Lussane Magnetic Traps Series 503 with stainless bodies dimensions:
- One Large Trap: Pipe Flanges – internal diameter 300mm, outer diameter 440mm.
- Two Small Traps: Pipe Flanges – internal diameter 200mm, outer diameter 340mm.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------
Search words (for official use only) :
Gas Powered CHP Power Plant for Sale
CHP Power Plant for Sale
Power Plant Built 1995-1996
Gas Powered CHP Power Plant Commissioned in 1997

-------------------------------------------------------------------------------------------

 

     
Worldoils Oil, Gas and Offshore Marketplace
Worldoils Oil, Gas and Offshore Marketplace - Gas Powered CHP Power Plant for Sale
Images
 
Gas Powered CHP Power Plant for Sale
 
Power Plant for Sale
 
Gas Powered CHP Power Plant Built 1995-96
 
Gas Powered Power Plant
 
1995-96 Built Gas Powered Power Plant
 

To enquire on this equipment, please send an email to

The information contained herein is believed to be accurate but has not been verified. This equipment is subject to prior sale and sold “where-is as-is” with no warranties from Worldoils Pte Ltd or the Seller expressed or implied.
Worldoils Oil, Gas and Offshore Marketplace    
Worldoils Oil, Gas and Offshore Marketplace

 


 

If you cannot find the new or used offshore rigs, vessels or equipment of any type, size or make that you are looking for, please send us an email to and we shall offer you.

Gas Powered CHP Power Plant for Sale
Worldoils Oil, Gas and Offshore Marketplace    Worldoils Oil, Gas and Offshore Marketplace

Equipment ID   : 1933
Equipment name   : Gas Powered CHP Power Plant for Sale
Category   : Miscellaneous Equipment
Specifications   : Gas Powered CHP Power Plant for Sale
Power Plant for Sale - 1995-96 Built



Description :

Gas powered CHP power plant was built in 1995-1996 and commissioned in 1997. The plant
is based around a GE LM6000PA aero-derivative gas turbine. The gas turbine can supply up
to 42 Megawatts of energy with an additional 7 Megawatts being supplied from a Siemens
back-pressure steam turbine. In addition, the plant can continuously supply up to 105 tonnes
per hour of steam with short term peak capacity of 120 tonnes per hour of steam.

The gas turbine exhausts into a Nooter Erikson heat recovery steam generator (HRSG) but
also has the option to exhaust directly to the atmosphere through a blast stack. This enables
the gas turbine to be run in open cycle mode if the HRSG is not available. The HRSG has
supplementary gas burners which can be run in addition to the gas turbine or can be run
without the gas turbine by using forced draft (FD) fans to supply combustion air. This adds
considerable flexibility to the plant.

Boiler discharge pressure is 32 barg. It is then run through the Steam Turbine to give a pressure
of 4.4 barg which is used in the mill. Both the gas turbine and steam turbine alternators
are rated at 11 kV, 50 Hz.

Total Hours (approx.): 100,983
Hours Since Last Major Overhaul: 49,869
Hours Since Last Hot End Overhaul: 14,903

A summary of power and steam production while fully operating is available!

Equipment List
- 1 x General Electric (GE) model LM6000PA Gas Turbine (GT) with water injection coupled
to a Brush alternator rated at 42 MW output. The GT is capable of being fired by natural
gas or distillate fuel.
- 1 x GT MK V control unit and associated auxiliary systems.
- 1 x Nooter Erikson Heat Recovery Steam Generator (HRSG) which is heated by the
exhaust gas from the GT and capable of supplementary firing with natural gas or
distillate fuel. Maximum steam output 105 tne steam/hour.
- 1 x Water treatment plant consisting of two 100% twin bed resin exchange units and two
mixed bed units (for GT water injection) complete with all auxiliary systems including
chemical storage and effluent tanks.
- 1 x Siemens back pressure steam turbine driven generator set rated at 7 MW output.
- 2 x Bellis and Morcom 3 stage reciprocating natural gas compressors, operated as
one running unit and a spare.
- 2 x 11/11 kV transformers, each rated at 30 MVA.
- 1 x Serck Distributed Control System (DCS).
- 3 x Control and general service air compressors.
- 1 x Boiler chemical dosing system.
- 1 x CBISS Continuous Emissions Monitoring System (CEMS) for monitoring and
recording stack gas emissions.
- 1 x Cooling tower complete with dump condenser cooling water pumps dosing systems
and auxiliaries. (Sale to be reviewed in final negotiation)
- 1 x installed fire detection and suppression system.
- 1 x installed gas detection system.
- All MP and LP steam pressure reducing stations and associated equipment.
- All installed cabling, transformers and switchgear associated with the above mentioned
plant. Cabling removal shall be agreed by a responsible IPWL electrical person. Metering
equipment which can be removed shall be agreed by a responsible IPWL person.
- Spare parts unique to the machinery scope as available.
- Extensive manuals, records and drawings as available.

Additional Items :
Four Nash Vacuum Pumps: model CL3002
Three Nash Vacuum Pumps: model CL 3001
Three inline Beloit Lussane Magnetic Traps Series 503 with stainless bodies dimensions:
- One Large Trap: Pipe Flanges – internal diameter 300mm, outer diameter 440mm.
- Two Small Traps: Pipe Flanges – internal diameter 200mm, outer diameter 340mm.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------
Search words (for official use only) :
Gas Powered CHP Power Plant for Sale
CHP Power Plant for Sale
Power Plant Built 1995-1996
Gas Powered CHP Power Plant Commissioned in 1997

-------------------------------------------------------------------------------------------

 

     
Worldoils Oil, Gas and Offshore Marketplace
Worldoils Oil, Gas and Offshore Marketplace - Gas Powered CHP Power Plant for Sale
Images
 
Gas Powered CHP Power Plant for Sale
 
Power Plant for Sale
 
Gas Powered CHP Power Plant Built 1995-96
 
Gas Powered Power Plant
 
1995-96 Built Gas Powered Power Plant
 

To enquire on this equipment, please send an email to

The information contained herein is believed to be accurate but has not been verified. This equipment is subject to prior sale and sold “where-is as-is” with no warranties from Worldoils Pte Ltd or the Seller expressed or implied.
Worldoils Oil, Gas and Offshore Marketplace    Worldoils Oil, Gas and Offshore Marketplace

 

Worldoils Land Rigs Market
1000hp Land Drilling Rigs
1500hp Rotary Land Drilling Rigs
2000hp Rotary Land Drilling Rigs
3000hp Rotary Land Drilling Rigs
Workover Land Rigs
Carrier Mounted Land Drilling Rigs
Trailer Mounted Land Drilling Rigs

Oilfield Container Camps

Oil Booster Pump for Wellhead Platforms

Offshore Jackup Rigs
Land Drilling Rigs
Barge  Swamp Rigs

Live Monitoring of Ships and rigs

Remote ship Bunker GFuel Monitoring

Ring Maintenance Software

New Offshore Jackup Rigs

Oil Rig Jobs

Helicopters for Sale, Helicopters for Oil Rig Services


 

If you cannot find the new or used offshore rigs, vessels or equipment of any type, size or make that you are looking for, please send us an email to and we shall offer you.


.......................................................................
www.worldoils.com  |  Disclaimer  |  Ethics