Home Biofuels Oil & Gas Directory Glossary Training News Newsletter Events LDPE Recycling Contact Water Well Rigs
Land Drilling Rigs Jackup Rigs Oilfield Container Camps Offshore Accommodation Steel Houses Mini Submarines Oil & Gas Equipment Marketplace
Home Biofuels Oil & Gas Directory Glossary Training News
Newsletter Events Contact Water Well Rigs Land Drilling Rigs
Jackup Rigs LDPE Recycling Oilfield Container Camps Crude Oil Price History
Steel Houses Mini Submarines Oil & Gas Equipment Marketplace
Home Jackup Rigs LDPE Recycling
News Water Well Rigs Land Drilling Rigs
Mini Submarines Events Steel Houses
Oilfield Container Camps Oil & Gas Directory
Oil & Gas Equipment Marketplace Contact
Untitled Document
alert  

If you cannot find the new or used offshore rigs, vessels or quipment of any type, size or make that you are looking for, please send us an email to and we shall offer you.

alert
Untitled Document
   

Untitled Document
 
Search Here

Rig/Vessel/Equipment Name: 
Category: 
Subcategory: 
Buy/Sell/Hire/Need for hiring: 
ID: 

 Browse equipments
No relevant equipments are found in our database.

 
Untitled Document
Featured equipments for sale
 
Coiled Tubing Rig
Worldoils Marketplace
Coiled Tubing Rig

Worldrigs ID: WR305

Coiled Tubing unit 2006 built for sale
Used Coiled Tubing Rig
Coiled Tubing unit


Particulars
Year : 2006
Make : Kenworth
Model : T800B
Engine : CAT C-15
Odometer : 28048 KM

Hours : 1984
Front : Dual Axle
Rear : Tri Axle
Air compressor : Hurricane 600 CFM

Injector : 20,000 LB
Drum capacity :
1” – 4,800M
1¼” – 3,200M
1½” – 2,300M

Hand tools : Basic assortment
Coil tubing : 3200 M 1¼”
Catch tank

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
---------------------------------------------------
Search words(for official use only) :
Used Coiled tubing rigs
Coiled Tubing Units
Used Coiled Tubing Units
Coil tubing unit
Used CT rigs
Coiled Tubing Rig
CT rig in Canada

---------------------------------------------------

 
Trailer Mounted Rack & Pinion, Super Single Rig
Worldoils Marketplace
Trailer Mounted Rack & Pinion, Super Single Rig

Worldrigs ID: WR2540

700HP Super Single Rig for Sale
10,000ft Drilling Depth Super Single Rig for Sale
Rack & Pinion, Super Single Drilling Rig for sale


General Description
Estimated Drilling Depth : 10,000 ft
Estimated Rig Move Loads : 22
Estimated Camp Move Loads : 4
Rated HP : 700

Mast
Height : 80.00 ft
Static Hook Load Capacity: 300,000 lbs
Mast Racking Capacity : N/A

Substructure
Style : Parallelogram
Height : 15.00 ft
Clear Height : 13.00 ft
Casing Capacity : 300,000 lbs
Maximum Setback Load (lbs.) : 300,000

No Drawworks

Top Drive / Power Swivel
Make : Foremost
Model : F 150 T
Capacity : 150 Ton

No Swivel
No Rotary Table


Power Generation
Engines : 2 ea. Detroit Diesel Series 6063HV35
Generators : 2 ea. Stamford Power System HCI534DIL
SCR / VFD / DC/DC : Rack & Pinion Rig

Enhancements
Forklift : Caterpillar 930 H
Forklift : Caterpillar 930 H
Iron Roughneck : Canrig Drilling Technology TM80-110-12-X-WX/PCS
Power Slip Frame : TTS Sense 83415-04

Mud System

Mud Pumps : 2 ea Hong Hua HHF-1000
Power Rating : 1000 hp @ 140 spm
Reserve Mud Volume : 0 bbls
Pressure Rating : 5,000 psi
Active Mud Volume : 700 bbls
Shale Shakers : 2 ea. Derrick Corporation FLC 504
Desander : Derrick Corporation 10" x 3 Cones
Desilter : Derrick Corporation 4" x 16 Cones
Mud Cleaner : N/A
Centrifuge : N/A

Well Control

Annular : 11" 5,000 psi, Townsend, Type 90/19012-11-5
Double Ram : 11" 5,000 psi, Townsend. Type 82/5
Choke Manifold : 2 1/16" 5,000 psi
BOP Closing Unit : Control Technology, 5 Station 3,000 psi

Price & terms : Please enquire using the email form below

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------------
Search words (for official use only) : 
Trailer Mounted Rack & Pinion, Super Single Rig
700HP Super Single Rig for Sale
10,000ft Drilling Depth Super Single Rig for Sale
Rack & Pinion, Super Single Drilling Rig for sale
700HP Trailer Mounted Rack & Pinion Rig for sale
Parallelogram Style Drilling Rig - For Sale
Land Drilling Rig for Sale
Super Single Drilling Rig - 700HP - For Sale

------------------------------------------------------------------------------------------
 
Cooper 750 Drilling Rig for Sale
Worldoils Marketplace
Cooper 750 Drilling Rig for Sale

Worldrigs ID: WR2226

Cooper 750 Drilling Rig 750 hp For Sale
750 hp Drilling Rig 750 hp For Sale in USA


Desciption

Drawworks :
Cooper 750 DD Drawworks, 750hp, Grooved for 1 1/8" Drill Line,
Powered by (2) 425hp Detroit Diesel Series 60 Engines,
W/Allison CLT-5860 Trasmissions, Caliper Disc Brake,
Cooper (2) Engine In-Line Compound, Cooper Right Angle Gearbox,
Cooper Deadline Anchor, All Mounted On a Four Axle

Auxiliary Brake:
Kobelt Pneumatic 48"

Mast :
DSI 117' H Double Soping Mast, 410,000# Static Hook Load,
(5) Sheave Crown Cluster, Crown Safety  Platform, Racking Board,
Tong Counter Weights, Ladder, Derrick Climber, Geronimo,
4" Standpipe and Manifold

Substructure :
DSI 17'8"H, Scoping T-Style Substructure, 300,000# Set Back Capacity,
Rotary Beams, Stairs, Safety Railing, Elevated Roatry Drive

Top Drive :
TESCO 250 HMIS 475 Top Drive and Power Unit, Rated 475hp, 250 ton,
(2) Speed/Torque Ranges, 21,000# Max Continous Torque
W/Max 85 RPM and 10,000# Max Continous Torque W/Max 170 RPM

Mud Pumps :
Two (2) Gardner Denver PZ-9 Triplex Pumps, 1000hp, Each
Powered by 1100hp Caterpillar D399 Diesel Engines, Forged Steel Fluid
end Modules, Quick Change Caps, K-20-5000 Pulsation Damper,
OTECO 3" Shear Relief Valve, 1 1/2" x 2" Centrifugal  Rod Cooling Pump,
5" x 6" Charge Pump, 6,000 PSI Pressure Gauge, Chain Drive Assembly

Well Control :
Shaffer LWS 11" 5M Double RAM, Hydril GK 11" 5M Annular,
Choke Line (1) 4-1/16" Hose, Kill Line (1) 2 1/16" Hose,
(1) 2 1/16" GATE Valves, (2) 2 1/16" Hose,
(1) 2 1/16" Gate valve, (1) Check Valve

Choke Manifold :
Cameron Type 5M, W/5-Way Cross, (2) 4 1/16" X 5M Gate Valves,
(8) 2 1/16" X 5M Gate Valves, (8) 2 1/16" X 5M Gate Valves,
(2) 2 1/16" 5,000 PSI Pressure Guage, DSI 3' X 10' Degasser,
Mounted on 8'W x 16'L Skid

Accumulator :
Koomey Type 80 (5) Five-Sation Closing Unit, With (16) 11 Gallon Accumulator Bottles,
(1) Triplex Pump, (2) Air Pumps With 120:1 Ratio

Mud System :
Two (2) Tank Mud System of Approximately 800 BBL Total Capacity

Shaker Tank of Approximately 400 BBLS, (2) Vortex Fluid Systems
Orbital Shale Shakers, Odrill Desender W/(2) 10" Cones,
Odrill Desilter W/(12) 4" Cones, (2) 6' x 5" Series 250 Centrifugal
Pumps Powered By A 60 hp AC Electric Motor

Suction Tank of Approximately 400 BBls W/(2) 6" x 8" Series 250
Centrifugal Pumps Powered By A 60 hp AC Electric Motor, (4) 15hp
Mud Agitators, Vortex Ventures Shearing Hopper, Vortes Radial Eductors
in Mud Tanks

Trip Tank : 
28 BBLS W/2" x 3" Centrifugal Pump

Power Catwalk : Rahco Hydraulic, Handles Double Joints of
Drill Pipe and Range 3 Casing

Generation/Utility House :
Two (2) Caterpillar 350 KW AC Generators, Powered By 475HP
CAT C-15 Diesel Engines W/Electric Start, Air Compressors and MCC Panel

Block/Hook :
American Block, 250 Ton Block/Hook Combination, With (5) 36" Sheaves for 1 1/8" line

Rotary Table :
IDECO 17-1/2"

Water Tank :
400 BBL. Complete W/(2) MCM 2" x 3" Centrifugal Pump Driven BY 20hp AC Electric Motors

Fuel Tank :
10,000 Gallon W/(2) Roper 3 HP Fuel Tranfer Pumps

Drillers Doghouse :
Drillers Doghouse 25' x 8'2" x 9'3"

Auxilliary Equipment :
Two (2) PC12 Hydraulic Winches, (1) IR FA2.5 Man Rider Air Hoist,
Spinnmaster 950 Hydraulic Drill Pipe

Instrumentation :
Weight Indicator, W/Tong Line Pull, Pump Pressure & Rotary Torque Gauges,
Type "D" 5,000 PSI Mud Pressure Gauge

Wireline Machine :
Five Star Retriever W/15,000' OF .092 Wireline

Well Site Trailers :
TA Structures Rig Manager Trailer 54' x 12'6" x 11'8", Crew Bunk/Change House

Tubulars :
Drill Pipe and Collars Per Contract Requirements

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Cooper 750 Drilling Rig for Sale
Cooper 750 Land Drilling Rig for Sale
750 hp Drilling Rig 750 hp For Sale in USA
Cooper 750 Drilling Rig 750 hp For Sale
---------------------------------------------------------------------------------------------------------------

Offshore Tug Supply Vessel for sale
Worldoils Marketplace
Offshore Tug Supply Vessel for sale

Worldrigs ID: WR227

Offshore Tug/Supply Vessel for Sale  
OSV For Sale


General
Built : 1983
Classification : Lloyd's: +100A, +E1 tug/supply "Offshore Rug/Supply Vessel" LMC UMS

Cargo Capacities
Dead Weight  :  
1700 tons at 5.98 m, draught (=S).
1600 tons at 5.86 m, draught (=W).
Deck cargo : 500 tons
Clear deck space : 38.5 x 11 m, total: 423.5 sqm
Deck strength :  
forw. frame 45 ; 5t/sqm
aft of frame 45 ; 7t/sqm
Fuel oil : 582.0 cbm
Base oil (max)  : 263.0 cbm
Drill water : 420.0 cbm
Liquid mud/brine : 470.0 cbm (3000bbls)
Potable water : 453.0 cbm
Dry bulk      
2 tanks 62.3 cbm
2 tanks 65.7 cbm
Total: 256 cbm

Machinery/Propulsion 
(direct diesel drive)
Main engines :  
2 MWM four-cycle Diesel engines
Type: MWM TBD 510 L8, total 9,280 BHP
Propellers : 2 C.P. propellers in fixed nozzles
Bow thruster : C.P. thruster, 680 BHP, 500 Kw, Lips, electric driven
Thrust : 10 tons
Bollard pull :  108 tons
Generators :  
Two shaft generators type AEG 687 KVA
Two diesel generators type AEG 330 KVA
Power supplly :  
450V - 3 phase - 60 Hz
230 - AC - 60 Hz
24V - DC
To cargodeck consumers / container plugs
1 x 450V / 3 phase / 63 Amp CEE 440V
1 x 450V / 3 phase / 25 Amp CEE 440V
Speed  : Max 15.5 knots
Fuel consumption in tons/day :
10 knots at 6.2 tons
12 knots at 12.5 tons
Rudders : 2 x "flap" type, synchronically controlled
Miscellaneous :  
Sewage plant, fuel oil separator, luboil separator, Halon fire
smothering equipment in engine room, fully equipped workshop

Navigation Equipment
Joystick  : AEG-Geopos
Gyro Compass : Anschutz - Standard 6
Magnetic Compass : AP Navigator Dantronik
Autopilot :  Anschutz 102 834N6
Radar 1 :  Decca Racal - Bridgemaster
Radar 2 :  Furuno FR 1221 NS
Radio Dir. Finder :  Koden KS 540 K
Navtex :  J.R.C, N.C.R, 300A
GPS Navigation :  J.R.C, Raystar 920
Decca Navigator :  AP Dantronik
Echo Sounder :  Atlas Echograph 48

Communication Equipment
Radiotel, MF/HF Transmitter :  Sailor T1127L
Watchreceiver (distress) :  Sailor R501
Life-boat radio  :  Skanti-TRP 1
VHF 1   :  Sailor RT146 Duplex
VHF 2   :  Sailor RT146 Duplex
Satcom C :  Capsat Thrance & Thrane 3020B
Walky Talky  :  3 x ICOM IC-M12H
VHF Comm. 2000(airplanes) :  Becker Flugfunk
EPIRB :  Jotron-305Mk II
Internal Comm. System : A.E.G./Phonico P-2591
Mobile phone (for network communication)
STRT : Jotron-Tronsart

Accommodation
Crew : 12 single cabins;  1 x 2 + 2 x 4 person cabins
Passengers : 10.1 x 2 + 2 x 4 per cabins
Recreation room : 1 x 16.0 sqm
Messroom : 1 x 21.0 sqm
Accomodatgion fully air conditioned/heated

Refrigerated Storage Capacity
Cold Store : 8.3 cbm at -20°C
Cooled store : 8.5 cbm at +4°C

Deck Machinery
Windlass : Hydraulic driven max. pull 16 tons
Anchors/chain : 2 x 21 shackles (32 m/m chain) + 1.5 tons anchor
Deepsea Anchor  :  Drum with 1500m, 36m/m wire + 1.5 tons anchor
Capstans :  2 x hydraulic driven max pull 11 tons
Tuggers   :  2 x hydraulic driven max pull 7/11.4 tons
Towing/AH winch  :  Hydraulic driven
Towing drum : capacity 1650 m of 76 mm diam wire
2 x AH drum : capacity 1000 m of 62 mm diam wire max pull 250 tons
Wildcats :  Max. pull 250 tons. 3"
Crane : Electric Hydraulic SWL 2 tons 8 mtr
Storage reels :  
2 hydraulic driven
capacity 1200 m of 70 mm. diam
1500 m. of 62 m. diam
length 4.0 m. diam. 1.85 m
Stopperpins :  
2 hydraulic driven (remote controlled)
Make:Karmoy, ......tons SWL
Guide Pins :  
2 hydraulic remote controlled pins Karmoy,
2 hydraulic romote controlled

Cargo Pumps/Discharge Rates
Exact rates are depending on discharge height to the platform and piping lay out on the platform.
Dry bulk : 2 compressors: 15sqm/hr (bar)
Barite : approx. 60 tons/hr
Bentonite : approx. 60 tons/hr
Cement : approx. 60 tons/hr
Fuel oil  : 1 x 150sqm/hr. at 75 m.l.c. (8.8bar)
Drillwater : 1 x 150sqm/hr. at 75 m.l.c. (8.8bar)
Potatble water  :  1 x 150sqm/hr. at 75 m.l.c. (8.8bar)
Liquid mud : 2 x discharge/circulation pumps.
Capacity : 80sqm/hr. at 75 head (18 bar)
Brine : 1 x 80 sqm. at 75 m.l.c.
Base oil  : 1 x 80 sqm/hr. at 75 m.l.c. (9 bar)
Couplings : Weco or Avery Hardol. 4" (   bar)

This vessel specification is given in good faith and assumed to be correct.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------
Search words :
Offshore Tug For sale
Offshore Supply Vessel For Sale
OSV vessel for sale
Offshore Tug
Offshore Supply Vessel

--------------------------------------------------------------------------

 
Mechanical Trailer Rig for sale
Worldoils Marketplace
Mechanical Trailer Rig for sale

Worldrigs ID: WR676

Mechanical Trailer Mounted Drilling Rig for Sale
Land Drilling Rig for Sale - 1000 HP Mechanical Trailer
1000 HP Trailer drilling rig for sale
1000HP - Mechanical Trailer Package

The 1000 H.P. Trailer Rig Package is designed to meet the demands of our customers for today’s competitive market. We pride ourselves on doing the little things necessary that it takes to supply our customers with the latest innovative technology. When designing rig packages we try to meet three simple goals. All rig components must :
1. Operate Properly.
2. Rig up quickly.
3. Transport in the fewest loads possible.

Using these principles, we have designed this rig package to meet and exceed all of our customers needs.

I. Hoisting Equipment
i. Mobile drilling trailer mounted type 1000HP, with single drum drawworks, two Detroit series 60 14.0 liter engines with two Allison S6610H transmissions with hydraulic torque converter. Mast height 118 ft., load capacity-425,000 lbs. (210 ton API). Rig mounted   on a 4-axle chassis.

A. Group I. Basic Rig
a. Drawworks – OEM-1000
i. Disc Brake System – Two (2) 60” O.D. x 4” Thick water cooled disc: Four (4) brake calipers w/park feature, each caliper can develop 48,000 ft-lbs @ 100 psi. Maximum 900 rpm calipers have a park feature rated @ 28,000 ft-lbs each. Manufacturer = Kobelt
ii. Air Clutch – Two (2) 30” diameter friction disc, slip torque rating 54,500 ft-lbs @ 100 psi, maximum 760 rpm, 1664 sq in lining area. Manufacturer = Witchita.
iii. Drum 24” O.D. x 40” length with Lebus groove system
iv. Centralized Lubrication System
v. Drill line Diameter-1 1/8”
vi. Drive  Chain - Four-strand, 1 ½” pitch
vii.Total Disc Brake Area - 1680 sq. inches

b. Auxilary Brake
i. Air Operated : Water Cooled Disc with copper alloy wear plates, mounted to frame, coupled directly to drum shaft. Two (2) 36” Disc rated @75,000 ft-lbs @100 psi maximum 640 rpm.
ii. Size-236 or equal
iii. Maximum Pressure - 100 psi
iv. RPM-640
v. Direct Coupled Drum shaft.

c. Combined Gear Box
i. Combined right angle drawworks drive drop box with one output shaft for rotary drive and one output shaft (unused) for additional components.
     1. One input shaft with 1810 drive flange.
     2. Top right shaft - drawworks drive, air engaged 1.0 to 1 ratio keyed shaft
     3. Top lower shaft - rotary drive, air engaged 1.1489 to 1 reduction ratio keyed shaft.
     4. Bottom lower shaft – Future or additional components, opposite top lower shaft, air engaged, 0.9787 to 1 ratio (1.0217 to 1 ratio increasing), 1810 drive flange.
ii. Gear type lubrication pump mounted intermediate shaft provides positive lubrication to bearings.

d. OEM 118’-0” x 425,000# Telescoping Mast
The 118ft., mast provides is a telescoping design, manufactured in accordance with API and Drilling Structures Int’l Inc.’s strict quality control processes. The mast includes an automatically deployed racking board.
i. A telescoping derrick with open face derrick design, manufactured to API 4-F specifications. The open face design utilizes structural steel construction, which allows for maximum block clearance. Derrick includes a ladder from rig floor to crown and a block cradle with chain & hook for securing block during transport.
iii. Base Section :
a. A-leg style base section hinged to carrier frame.  (2) Turnbuckles attached from bottom of derrick base to carrier frame allow for mast angle adjustment.  The well-side derrick legs have manual screw jacks.

ii Specifications
Mast Height : 118’
No. of lines to Block : 8 or 10
API Operating Hook Load -
8-Lines : 340,000 lbs
10-Lines : 425,000 lbs

Drilling Line Size : 1-1/8 in.
Racking Board Height : 55ft., 58ft., 70ft.
Racking Board Capacity
5 in. Drill Pipe : 12,400 ft.

iii. Base Section :
a. A-leg style base section hinged to carrier frame.  (2) Turnbuckles attached from bottom
of derrick base to carrier frame allow for mast angle adjustment.  The well-side derrick
legs have manual screw jacks.

iv. Lower Section :
a. 6 in x 6 in x 3/4 in angle main legs, with 6 in x 4 in x 3/8 in rectangular tubing “back” braces.  Lower section of mast hinges to top of derrick base and rests on headache rack during transport.

v.  Upper Section :
a. Angle construction. 6 in x 6 in x ¾” upper legs, with  3 in x 3 in x 3/8 in “back” braces.  Upper section rests inside lower section until mast is raised. Upper section then telescopes hydraulically upward from lower section and locks in place with automatic latching pins.

vi. Crown Block :
a. Crown block is set up for a 8 or 10 line string-up.  Crown sheaves are grooved for 1-1/8 in.  Wire line. All sheaves are mounted on tapered roller bearings with grease certs for ease of maintenance.
b. Crown includes : (1) one 30 in fast line sheave, and (4) four 24 in crossover sheaves.

vii. Racking Board :
a. The mast includes an all welded racking board. The racking board automatically deploys as the mast is extended.

viii. Derrick Raising System :
a. The derrick is designed to utilize two, 72”x 9” x 3-stage, double acting raising rams and one 50’ x 7” single-stage telescoping cylinder. 

ix. Guylines :
a. Derrick includes (2) load guys from the crown to carrier and (1) set of wind guys that meet or exceed API specifications.

e. Hydraulic Catworks :
a. Hydraulic break out cylinder for breaking out pipe connections, 4 ft. stroke, maximum pull load 20,000 lbs. Installed on the mast. Includes cable, roller guides and hydraulic piping.
b. Hydraulic make up cylinder for making up pipe connections, 4 ft. stroke, maximum pull load 20,000 lbs. Installed on the mast. Includes cable, roller guides and hydraulic piping.
c. Controls are located at the operator’s console.

f. Traveling Block Limit Switch (Crown Block Saver)
a. Safety device for limiting traveling block raising. Installed at the main drum to activate the main brake when traveling block is up to a pre-determined  height.

g. Deadline Anchor
a. Dead line anchor to be used with compression type weight sensor. Drum type, mounted on carrier frame in front of drawworks frame.

h. Diesel Engine
a. Two Detroit series 60 - 14.0L engines rated at 600 BHP each@ 2100 RPM’s, 6 cylinders (inline) complete with DDC electronic control system.
b. Includes : Radiator, Heavy Duty Blower, 24V starter and alternator, variable speed governor, full instrumentation (ignition switch, ddr connector, electic throttle, electronic display module), two (2) 12v batteries and spark arrestor muffler.
c. Specifications : 600 BHP @ 2100 RPM, 1650 lbs/ft @ 1100 RPM

i. Transmission
a. 5 speed (6th gear locked out), automatic, Allison S6610H or equal w/torque converter, oil cooler. Dual air/hydraulic operation. Max. capacity 850 HP, 2500 RPM, 2300 ft-lbs input.

j. Compound Gear Box
a. Compound gear box, dual input, single output, may be drive with one or both engines.
b. Two input shafts, air engaged, 1810 drive flange (engagement of either input or a combination of both)
c. Single output, 1810 drive flange, ration 1.0271 to 1 to combination gear box.
d. Gear type lubrication pump. Mounted to output shaft  provides positive lubrication to bearing.

k. Power Take-off
a. Chelsea 852 XB or equal, Used for hydraulic pump drive, mounted on transmission, 95 HP @ 1000 rpm output.

l. Hydraulic System
a. Two hydraulic gear pumps, one 500 gallon hydraulic tanks with containment pan, filters, heat exchanger and sight glass. Capable of producing 50 gpm @ 3000 psi, pressure return and circulation filters with visual indicator, 3000 watts portable generator, inline flow meter, system safety release valve, circuit breaker panel for heater/valve bank, operator panel with selector switch.
b. Custom built valve bank, 15 station manifold, prewired control panel and hand held remote with the following functions :
i.   Mast lower/raise
ii.  Mast telescope up/down
iii. Two (2) hydraulic pilot operated directional valve and joystick for winches.
iv. Six (6) leveling jacks.
v.  D.S. sub raise/lower
vi. ODS sub raise/lower
vii. Make up/Brake out tong cylinders with remote torque adjustment
viii.Flow dividers for mast raise and sub cylinders
ix. Electrical control panel, remote controls and function switches for above
x.  Velocity fuses on all cylinders for fall protection

m. Air System :
a. Air system with on (1) 60 gallon receiver to provide air to main air line and brake system. Includes air lines, control valves, pressure gauges.

n. Air Compressor :
a. Air compressors with direct drive, mounted on engine.
b. Reciprocal type, 28 CFM capacity

o. Operator’s Controls :
a.   Operator’s console to include the following controls and instrumentation:
i.    Main drum brake lever
ii.   Main drum clutch controls
iii.  Two engine throttles – One (1) hand and one (1) foot
iv.  Shift levers for two 4-speed transmissions
v.   Two emergency engine shut downs
vi.  Hydraulic pump controls
vii. Two mud pump engine regulators
viii. Mud pump engine emergency shut down
ix.  Mud pump clutch controls
x.   Instrumentation Air Pressure Gauge
b. All air operated controls are located in the central part of the console and have identifying tags. Console is located to provide good visibility of traveling block, work floor and racking board.

p. Engine Emergency Shut Down :
a. One engine emergency shut down valve for emergency engine stop. Located at the operator’s console.

q. Trailer Mounted :
a. A heavy duty 4-axle trailer with air suspension and 109,000 lb. total capacity.
b. All lights and brakes are equipped for attachment to the truck
c. Spring brake chambers for safety.

r. Tires (12.00 x 22.5, Pirelli Radial) 16 each
a. All tires, disc wheels, 16 tires mounted as dual. Tire rating 109,000 lbs. total, all tires inflated to 100 psi.

s. Suspensions
a. One (1) two axle, single point bogey at rear.
b. Two single axles with air bags, air can be dumped for backing into position
c. All axles are 12.5 metric ton capacity.

t. Four Pedestals for Hydraulic Jacks
a. Pedestals under front jack for rig stability. Four pedestals require. There are to be six jacks for leveling the rig.

u. Six Hydraulic Jacks
a. Six hydraulic leveling jacks to take off the load from the axle and provide horizontal position of the rig during operation. Each jack is operated by its own controls and is equipped with screw with thrust nut, which allows relieving hydraulic pressure from he jacks during rig operation. Controls are located at the mast supports.

v. Fuel Tank
a. Mounted on the side of the chassis

w. Auxiliary Hydraulic Winch (2 winches using one for spare) :
a. Braden or equal hydraulic winch with 12,000 lbs. pull load at the first layer, 336 fpm @ 65 GPM and 2400 psi.
b. Hydraulic brake and spooler
c. Sheave is mounted on the crown

x. Rotary Table Drive
a. One rotary table drive with driveshaft and two air clutches(one for rotary on and off, second for emergency shut down)
b. Controls are located at the operator’s console

y. Rotary Table Drive Chain Gear Box :
a. Includes three oil-greased shafts inside full-length guard, complete with sprockets, flanges, chains and chain gear-box with one shaft to connect to rotary table. One lower section mounted on the trailer, one upper section mounted on the sub and one flanged driveline between.

Group II
A. OEM Hydraulically Telescoping 17-425 Substructure
1) Material and labor to fabricate one (1) OEM hydraulic telescoping 17-425 substructure as per the following :
i. Hydraulic Telescoping Substructure with :
 - 425,000# Rotary beams
 - 300,000# Setback.
 - Clear height under rotary beams = 14’
 - Transportation height 12’-6”
 - Base dimensions 45’L x 12’-6”W
 - Working floor dimensions 20’ x 26’
 - Rathole and mouse hole locations
 - Two tong backup posts
 - Removable braces in cellar area.
 - Provisions for attaching mast support beam.
 - Supply and installation of four (4) hydraulic scoping cylinders.
 - Pull out post for guy wires to front of mast.
 - Removable flooring around rotary table area.
 - B.O.P. Dolly and tracking.
The above substructure to be fabricated under A.P.I. 4F guidelines. Upon completion, substructure to be tagged with OEM A.P.I. 4F nameplate.

B. Mud Boat :
i. Material and labor to fabricate one (1) mud boat. Mud boat complete with :
  1. Supports under jacks on carrier.
  2. Pipe guides for tires
  3. Pin connections to mast support beam.
  4. Loading hitches on one end

C. Mast Support Beam/Brake Water Tank/Trip Tank Combo
i. Material and labor to fabricate one (1) mast support beam/trip tank/brake water tank combination. Combination complete with :
1. Brake Water Tank - Material and labor to fabricate one (1) break water tank. Tank to be enclosed for rig up winterization.
a. Tank to have the following :
i. Tank bottoms to be 3/8” plate.
ii. Tanks constructed with ¼” v-crimp.
iii. Tank rims to be 4” square tubing.
iv. Access ladder
v. Man way
vi. Tong buckets, guides, and safety cage.
vii. Supply and installation of :
   1. Two (2) 2 x 3 centrifugal pumps
   2. Heat exchanger

2. Trip Tank – Material and labor to fabricate one (1) trip tank. Tank to be enclosed for rig up winterization.
a. Tank to have the following:
i. Tank bottoms to be 3/8” plate.
ii. Tanks constructed with ¼” v-crimp.
iii. Tank rims to be 4” square tubing.
iv. Access ladder
v. Man way
vi. Tong buckets, guides, and safety cage.
vii. Provisions to mount:
   1. One (1) 2 x 3 centrifugal pumps

3. Mast Support Beam – Material and labor to fabricate one (1) three runner mast support beam.
a. Support beam complete with:
i. Supports for carrier jacks and bottom base of mast.
ii. Loading hitches on both ends for tailboarding.

D. Rig Floor Stairways – All stairs to meet OSHA standards with no slip grip strut stair treads.
i. Three (3) 17’-0” stairway from substructure floor to ground level. Stairs to be built on a 45-degree angle.
ii. One (1) 9’-6” stairway from top of the substructure to top of mud tank. Stairs to be built on a 45 degree angle.

E. V-Door Ramp - Ramp to be fabricated to work with a 17-0” floor height substructure and an 18” catwalk. Ramp to be fabricated with ½” plate and 3” pipe guides.

F. Catwalk – One 50’ x 5’-0” x 18” catwalk with snatch post mounted on one end.

G. Doghouse - House to be fabricated on a three-runner oilfield type skid with loading hitches on both ends for tailboarding. House to have checker plated flooring, v-crimped wall construction, and an arched type roof. House complete with the following :
  1. 4’-0” porch on one ends
  2. 2’-0” walkway on the back side of the doghouse running to full length.
  3. Handrails around house perimeter.
  4. One sliding doorway to rig side.
  5. One swing type doorways on both ends with windows built in.
  6. Two (2) windows on the back side wall
  7. Knowledge box
  8. Three compartment workbench.

Group III - Prime Mover Drive
A. Lighting System –Heavy Duty explosion proof Fluorescent and Mercury Vapor Lightning System designed to use with Mast and Substructure, Mud System, complete with Plug, Receptacles, Cable, Cable Clamps and all necessary Leads and fitting.  Lighting System consist of: Mast and Racking Platform, Substructure Lighting, Mud Tanks and Mud Pumps, and Utility House, including Battery emergency light at Driller’s console certified for Class 1 Division 2.

B. Engine/Generator/Part/Change Package
a. Utility House - “New” - Material and labor to fabricate one (1) utility house. House (43’x 12’ x 9’) to be constructed on an oilfield type skid (45’x 12’x 18”) with loading hitches on both ends for tailboarding. Top of skid covered with ¼” checker plate.
i. Parts/change house to be complete with :
  1. Twenty (20) lockers.
  2. Changing bench near lockers.
  3. Two sets of shelves on each wall running 8’-0”.
  4. One (1) bench on each wall. Bench compartments to be 5’-0” with folding bench. Two compartments to have ventilation to the outside for paint storage.

ii. Generator house complete with :
  1. One (1) 8’-0” sliding door on side of the generator location
  2. Provisions for mounting one (1) electrical plug panel.
  3. Radiator end of skid left open.
  4. Skid designed for generator tie downs to be mounted on cross beams of skid for safety.

b. Generator – Two (2) Detroit 60 Series 14L.

c. Electrical Specifications
i. Item 1 – Clarification
  1. Prime mover specifications were not provided; IEC Systems assumes the engine and generator sizes as listed in this proposal.
  2. The generator house will be designed to accommodate the “Three Tank Drilling Rig Standard” and thus be interchangeable with all rigs that meet the standard
  3. IEC System proposal is based on performing the installation in Houston, Texas.  All components listed below will be installed and tested
  4. Customer will furnish the voltage regulator and voltage rheostat

ii. Item 2 – Generator Houston Electrical System For a Mechanical Rig
 1. Generator House 480 VAC Switchboard
   a. 1 ea - A/C Generator Control Panel by IEC Systems for the control of two (2), 450 kW, 480 volt, 3 phase, 4-wire, 60 Hertz, A/C generators. 
   b. Switchgear to contain full instrumentation and will not be designed for full parallel operation of generators.
   c. Switchboard will be NEMA Type 1 enclosure with ASA #61 gray enamel finish, designed to meet NEMA and OSHA specifications. 
   d. All nameplates will be constructed of plastic plates, black on white for names and red on white for warnings.

GENERATOR CONTROLS MOUNTED IN THE SWITCHGEAR WILL CONSIST OF:
2 - Generator Main Circuit Breakers (Gen PWR)
2 - Generator "Power Available" Indicating Lights
2 - Voltmeters
2 - Voltmeter Switches
2 - Ammeters
2 - Ammeter Switches
2 - Frequency Meters
2 - Reverse Power Relays
1 - Ground Detection System
2 - Governor Control Switches
2 - Wire to Customer Furnished Voltage Regulators
2 - Wire to Customer Furnished Voltage Rheostats
1 - Lot Current Transformers, Potential Transformers, Fuse Blocks, Fuses, Buss Bar, Switchboard Wiring, and related equipment

Switchboard will be fully assembled, wired, and shop tested.

2. Generator House 480V Motor Control Center (MCC)
a. 1 ea - 480 Volt, 3-phase, 60 Hertz A/C Motor Control Center, equipped with braced horizontal and vertical bus
b. Enclosure will be NEMA Type 1 with front only access
c. Motor starters will be combination, full voltage- non-reversing with 3-pole overload blocks, heaters, control power transformer, operating handle, fuses and start/stop controls in cover with red "RUN" indicating lights
d. 480V MCC Motor Starters

i. Five (5) Size 4 Starters for :
   1 ea 60 HP Mud Mixer 1
   1 ea 60 HP Mud Mixer 2
   1 ea 60 HP Desander
   1 ea 60 HP Desilter
   1 ea Spare

ii. One (1) Size 3 Starter for:
    1 ea 40 HP Trip Tank
 
iii. Five (5) Size 2 Starters for:
   1 ea  20 HP Drill Water 1
   1 ea  20 HP Drill Water 2
   1 ea  25 HP Brake Cooling Pump 1
   1 ea  25 HP Brake Cooling Pump 2
   1 ea Spare

iv. 480 V MCC Motor Feeder Circuit Breaker
   1. 1 ea - 150 AMP 3 Pole Circuit Breaker for Camp Feeder

3. Generator House 480V Distribution Panel Boards
a. 1 ea - 480V POWER DISTRIBUTION PANEL BOARD (P1)
  i. 480V, 3-Phase, 3-Wire
  ii. NEMA 1 Enclosure
  iii. 600A MLO with Feed-Thru Lugs
  iv. 36 CKT with branch Circuit Breakers for the following loads:
     a. 1 ea - 100A/3-Phase CB for 75 KVA Lighting Transformer
     b. 1 ea - 60A/3-Phase CB for BOP Accumulator (30 HP)
     c. 1 ea - 60A/3-Phase CB for Spare
     d. 1 ea - 30A/3-Phase CB for Agitators 1, 2 Feeder (10 HP each)
     e. 1 ea - 30A/3-Phase CB for BOP House Heater (15 kW)
     f.  1 ea - 30A/3-Phase CB for Change House Heater (15 kW)
     g. 1 ea - 15A/3-Phase CB for Liner Washer 1 (3 HP)
     h. 1 ea - 15A/3-Phase CB for Liner Washer 2 (3 HP)
     i.  1 ea - 20A/3-Phase CB for Fuel Pumps 1 & 2 Feeder (3 HP each)
     j.  1 ea - 20A/3-Phase CB for Shale Shaker 1 & 2 Feeder (5 HP each)
     k. 1 ea - 30A/3-Phase CB for Spare
     l.  1 ea - 30A/3-Phase CB for Wireline (15 HP)

b. 1 ea - 480V DISTRIBUTION PANEL BOARD (P2)
  i. 480V, 3-Phase, 3-Wire
  ii. NEMA 1 Enclosure
  iii. 600A MLO with Feed-Thru Lugs
  iv. 30 CKT with branch Circuit Breakers for the following loads:
     1. 1 ea   100A/3-Phase CB for Hydraulic Power Unit (HPU), (50 HP)
     2. 1 ea   100A/3-Phase CB for Air Compressors #1 & 2 (25 HP each)
     3. 1 ea   20A/3-Phase CB for Vacuum Degasser (7.5 HP)
     4. 1 ea   30A/3-Phase CB for Dog House Heater (15 kW)
     5. 1 ea   60A/3-Phase CB for Agitators 3, 4, 5 Feeder (10 HP each)
     6. 1 ea   30A/3-Phase CB for Hopper House Heater (15 kW)
     7. 1 ea   40A/3-Phase CB for Spare
     8. 1 ea   60A/3-Phase CB for Spare
     9. 1 ea   30A/3-Phase CB for Spare
     10.1 ea  30A/3-Phase CB for Spare

4. Generator House 120/208 Distribution Panel Board
a. 1 ea - 120/208V DISTRIBUTION PANEL BOARD (P3)
  i. 120/208V, 3-Phase, 4-Wire
  ii. NEMA 1 Enclosure
  iii. 225 MLO, Top Feed
  iv. 42 CKT with branch (124/240V-10 KAIC) Circuit Breakers for the following loads:
     1. 1 ea -   100A/3-Phase CB for Rig Floor Lighting Panel
     2. 1 ea -   100A/3-Phase CB for Spare
     3. 1 ea -   100A/3-Phase CB for Boiler House Feeder
     4. 1 ea -   60A/3-Phase CB for Spare
     5. 1 ea -   30A/3-Phase CB for Spare
     6. 10 ea - 20A/1-Phase CBs for Lighting Circuits 1 thru 10
     7. 1 ea    20A/1-Phase CBs for Engine/Generator House Steam Heater Blowers
     8. 1 ea    20A/1-Phase CBs for Trip & Shaker Tank Steam Heater Blowers
     9. 1 ea    20A/1-Phase CBs for Mud Pump 1 & 2 Steam Heater Blowers
     10. 1 ea  20A/1-Phase CBs for Mixer Skid Steam Heater Blowers
     11. 1 ea  20A/1-Phase CBs for Engine/Generator House Lighting Circuit
     12. 1 ea  20A/1-Phase CBs for Generator 1 & 2 Block Heater Feeders

5. Generator House Plug Board
a. 1 ea Metal shroud protected weatherproof receptacle panel with matching plugs for all the above starters and circuits having cables that exit the Generator House. 
b. Receptacles to have protective vapor proof caps. Plugs and receptacles will be permanently identified.
c. 480V Plug and Receptacle sets provided for the plug board include all loads listed above in Section C and D (MCC and Panel Board Loads)
d. Additional Plug Board Spare Plugs and Receptacles
    6 ea   30A, 3-Pole, 480V
    5 ea   60A, 3-Pole, 480V
    2 ea   100A, 3-Pole, 480V

6. Generator House 480/208-120V Rig Lighting Transformer
a. 1 ea   75 KVA Transformer with 480V Primary and 120/208V Secondary mounted in a drip-proof enclosure.  Primary Power will be from the P1 Panel Board.

7. Generator House Power and Control Cabling
a. 1 lot A/C Power and Control Wiring by IEC Systems to connect two 450 KW, 480 volt, 60 Hertz A/C generators to 480V Switchboard
b. All A/C generator power cables with 90°C rates insulation sized/de-rated for use in 45°C ambient atmosphere.
c. 1 lot Glastic Plates to prevent excessive heat caused by electrical fields where power cables enter generators.
d. 1 lot  A/C Power and Control Wiring to connect A/C generator control panel to:
  i. MCC
     1. P1 Panel Board
     2. P2 Panel Board
     3. P3 Panel Board
     4. 75 KVA Lighting Transformer
     5. Generator House Plug Board (receptacles)

8. Generator House Lighting
a. Generator Sheds Lighting receptacle string complete with plugs and receptacles, cable, cable clamps, and all necessary leads and fittings to accommodate the following :
 i.   4 ea - C1D2 Hazardous Area fluorescent fixtures complete with lead
 ii.  1 ea - C1D2 Hazardous Area Metal Halide floodlight fixture complete with lead
 iii. 1 ea - Mounting Stanchions for Floodlights

Group IV - Rotating Equipment
B. “New” American Block Traveling Block and Hook
  a. 250 Ton Traveling Block, API load rating: 250 Ton, sheave groove 1 1/8”.

C. “Rebuilt” National C275 Rotary Table and Accessories
  a. 27 ½” rotary table with 27 ½” table opening, static load capacity : 650 ton, gear ratio 3.6 : 1, torque cap : 30,000 ft-lbs @ 60 rpm.

D. “Rebuilt’ Rotary Swivel
  a. 250 Ton

Group V - Circulating Systems
A. Two “New” Mechanical Drive 1000HP Mud Pumps
a. Two (2) “New” Eweco - 1100HP Mud Pumps
b. Two (2) “New” Detroit D2000 Engines
c. Unitized on one common skid with:
  i. Model C-300-100F(H) OWI Torque Converter
  ii. Belt Drive
  iii. Dual 24” Eaton Airflex
  iv. Drum Hub for 24” Dual Clutch
  v. Drum Flange, external 24”
  vi. 5 x 6 Centrifugal pump
d. Control system including :
  i. Air throttle
  ii. Air valve to engage and disengage clutch
  iii. Hoses and mounting hardware.

B. Two Tank 850 BBL Mud System  - Material and labor to fabricate one (1) two tank 850 bbl mud system as per our discussions. OEM to completely fabricate tanks (40’ x 10’-6” x 7’-0”) on a three runner oil field type skid (50’ x 7’-10” x 8”) with loading hitches on both ends for tail boarding. Tanks to have internal ladders to each compartment, equipment supports, fold down type handrails and covered with galvanizes bar grating .Mud system to consists of the following :

i. Shaker Tank – Four equal compartments
- Shale Pit
  • 10’-0’’ compartment
  • One (1) cleanout
  • One (1) overflow
- Desander Pit
  • 10’-0 compartment
  • One (1) cleanout
  • One (1) overflow
  • One (1) 6” suction line from 5 x 6 centrifugal pump.
  • One (1) 8” equalizer. Bottom mounted with top mounted handle.
- Desilter Pit
  • 10’-0’’ compartment
  • One (1) cleanout
  • One (1) overflow
  • One (1) 6” suction line from 5 x 6 centrifugal pump.
  • One (1) 18” equalizer. Bottom mounted with top mounted handle.
  • Equipment supports for one (1) 10 HP agitator
- Degasser Pit
  • 10’-0’’ compartment
  • One (1) cleanout
  • One (1) overflow
  • One (1) 8” bottom equalizer and one (1) 8” top equalizer.
  • Equipment supports for one (1) 10 HP agitator.
- 9’-0’’ Porch
  • Able to accept two (2) 5 x 6 centrifugal pumps
  • 10’’ equalizer line to Suction Tank.
  • Covered with ¼’’ Chk’d floor plate.
  • Overhead plated roof.

ii. Suction Tank – Two Compartments
- Suction compartment
  • 30’ – 0’’ compartment
  • One (1) cleanout gate.
  • Two (2) 6” suction lines going to main mud pumps.
  • Equipment supports for two (2) 15 HP agitators.
- Pill Compartment
  • 10’-0’’ compartment.
  • One (1) cleanout gate.
  • One (1) 8” equalizer. Bottom mounted with top mounted handle.
  • One (1) overflow
  • Equipment supports for one (1) 10 HP agitator
- Porch
  • Able to accept two (2) 5x6 centrifugal pumps.
  • 6’’ line to both pumps
  • One (1) discharge dumping line
     - Pill Tank
     - Suction Tank

iii. Accessories
1. Single slide for shaker. Slide to mount to the side of the tank and fold down during transportation. Slide complete with 6” pipe end for hose hook up in the field.
2. Single slide for desander. Slide to mount to the side of the tank and fold down during transportation. Slide complete with 6” pipe end for hose hook up in the field.
3. Single slide for desilter. Slide to mount to the side of the tank and fold down during transportation. Slide complete with 6” pipe end for hose hook up in the field.
4. Fold down type walkways around shaker area complete with galvanized grating and removable handrails. Walkways to fold down during transport.

iv. Solid Control Equipment
1. Four (4) Mission Magnum 6 x 5 x 11 magnum1 with a 10.5 inch impeller, mechanical seal and hard iron material, all  mounted on a mission fabricated steel base with woods style coupling, OSHA type coupling guard and a 75 HP 1750     RPM, 3 PH, 230/460 Volt, 60 Hz explosion proof electric motor.
2. Three (3) Derrick DE-AG-10 Agitators complete with 10 HP, 1800 RPM explosion proof C-face motor bolted to a gear box. Including shaft stabilizer, shaft and impeller.
3. Two (2) Derrick DE-AG-15 Agitators complete with 15 HP, 1800 RPM explosion proof C-face motor bolted to a gear box. Including shaft stabilizer, shaft and impeller.
4. One (1) Derrick two cone desander.
5. One (1) Derrick sixteen cone desilter.
6. One (1) Hopper with venturi.
7. One (1) Derrick Vacuum degasser 1200 GPM. Skid mounted with heavy duty 3 HP explosion proof 230/460 volt, 60 Hz, 3 Ph, 1800 RPM motor and manual starter with heavy duty vacuum pump.
8. Two (2) Derrick Flo-Line Cleaner 503 Shale Shakers w/weir feed complete with three panel screen frame, support structure, and explosion proof electrics with the following options :
  1.  A.W.D. (+7 deg uphill to –1 deg downhill)
  2.  Standard Screen Underflow hopper
  3.  Weir feed
  4.  Super G Vibrations Motors
  5.  Single side tensioning system
  9.  36” Poor Boy Degasser on a separate skid.

VI. BOP
A. Six (6) Station Accumilator
B. Choke & Kill Manifold
C. Note – BOP to be supplied by others (Not include in pricing.)

VII Utilities
A. Air Compressor & Receiver
  a. Two (2) Gardner Denver, ST-30, Electra-Saver II, rotary screw air compressor, Model EBE99Q. 30 HP, 460 volts, 3 phase, 60 HZ, TEFC, with NEMA 4 Control Enclosure.
  b. Two (2) Steel Fab, 400 gallon, vertical air receivers with full skirt, 200 psi working pressure.Part # A12614. Unit is California Coded.
  c. One (1) RNC250 air dryer for 250 CFM.

VIII. Instrumentation
A. Drift Indicator
    Totco Double Recording Drift 0 to 8° and 0 to 14°. Clock complete with following :
  -  1 ea. Godevil Kit
  -  1 ea. Chart tool & Chart Reader
  -  1 ea. Tool Maintenance Box w/ Tool
  -  100 ea. Chart 0 to 8° and 0 to 14°
  -  10 ea. Rubber Finger Stabilizer
  -  Fishing Tool 7 rope sockets

B. Indicator/Gauge & Counter
    EMS-2 or Equivalent Rotary Torque indicator, Weight indicator, and Tong torque gauge, Circulating pressure gauge, two (2) ea. Pump stroke counter.

C. Drilling Recorder
    EMS-2 or Equivalent Drilling recorder, 9 pen (weight, torque, penetration rate, pump pressure, rotary rpm). (Diameter 103 Dan Kurang 6 Buah Printed Circuit Board).

D. PVT
    EMS-2 or Equivalent Pit volume totalizer, single channel with audio alarm and warning lights, four pit transmitters totalizing relay, gain and loss gauge with gauge zero devices.  Full digital instrumentations.

E. Flow-Shoe-Device
    EMS-2 or Equivalent Device complete with recorder and alarm system

Group IX - Fabrications
A. Accumulator/Junk Bend/Air Package Combo
 a. Material and labor to fabricate one (1) accumulator/pipe bend skid as per our conversations. OEM to fabricate a three runner oilfield type skid (40’ x 10’ x 12”)
     covered with ¼” check plate. Piping to be done during rig up. Skids complete with:
  i. One (1) arched type roof and enclosure.
  v. Mounting supports for two (2) vertical air receivers.
  vi. Mounting supports for one (1) accumulator.
  vii. Mounting supports for:
     1. Two (2) air compressors
  viii. Access doors
     1. One 36” swing type door way
     2. Two (2) 48” double door way.

B. Parts/Mechanic Shop - “New”
    Material and labor to fabricate one (1) parts/change house. House (38’x 10’x 9’) to be constructed on an oilfield type skid (40’x 10’x 12”) with loading hitches on both ends for tailboarding. Top of skid covered with ¼” checker plate. House to be complete with:
     • One (1) work bench and One (1) Table
     • Two sets of shelves on each wall.
     • Four (4) storage benches.

C. 500 bbl Water Tank
Material and labor to fabricate one (1) 500 bbl water tank as per our conversation. Tanks fabricated on oilfield type skids with loading hitches on both ends for tailboarding. Skid ends to be covered with ¼” check plate. Tanks complete with the following :
 -  Two (2) 3 x 2 x 11 Centrifugal pumps with 25 HP Motors
 -  Suction and Discharge Piping.
 -  Two (2) ladder rung to top of tank (In and Out)
 -  4” Fill cap
 -  2” Outlet
 -  1” Drain

D. One (1) 12,000 Gallon Fuel Tank
Material and labor to fabricate one (1) 12,000 gallon fuel tank as per our conversation. Tanks fabricated on oilfield type skids with loading hitches on both ends for tailboarding. Skid ends to be covered with ¼” check plate. Tanks complete with the following :
 -  Two (2) fuel transfer pumps
 -  One (1) filter system.
 -  Suction and Discharge Piping.
 -  Two (2) ladder rung to top of tank (In and Out)
      Top and Side man ways, 4” Fill cap, 2” Outlet, and 1 ½” Drain

E. Cable Trays - Material and labor to fabricate one (1) lot of cable trays as per the following. Cable trays to be fabricated as follows :
 -  Two (1) 40’-0” sections from substructure to fuel tank.
 -  One (1) 35’-0” section from mud tanks to main trays.
 -  One (1) 20’-0” section from substructure to main stairs.
 -  Cable trays complete with the following:
     •  Hinged doors in 5’-0” sections with chain for each doorway.
     •  Flat expanded metal running the length of each tray.
     •  ½” round bar at each end of cable tray to provide protection when pulling wires.

F. Mud Gas Seperator and Transportation Skid - “New”
  - Material and labor to fabricate one (1) 36” poor boy degasser and skid. Gas buster to me mounted on a three-runner oilfield type skid with loading hitches on both ends for tailboarding. Gas buster complete with :
     •  36” Pipe with weld caps on both ends.
     •  Internal baffles.
     •  All piping and pipe brackets.
     •  Gas buster to elevate to working condition to allow operation under half full conditions.
     •  Gas buster to be mounted in lay down position for transport and to be raised by truck for operation.

Group X - Rig Up Items
A. High Pressure Piping
 a. Material and labor to fabrication one (1) lot of high-pressure piping. All piping to be 4” schedule 160 and all unions to be weld type 1002. High pressure piping complete as per the following:
   i. Standpipe
    1. Standpipe to be located on the Off-Driller’s Side.
    2. Standpipe to have hammer union breaks at mast sections so it can me transported without being taken off the mast.
  ii. Standpipe Manifold
    1. The standpipe manifold will be complete with manifold type tee with two 2” outlets. Outlets to have hammer union connections only.
    2. The 4” outlets to have a 4” gate valve on the top of the cross.
  iii. High Pressure Line
    1. The high-pressure line will run from the bottom of the standpipe manifold to the side of the mud boat
    2. The cellar line will  be mounted to the mast support beam.
    3. There will be hammer unions at break of the substructures for transportation.

B. Structural set and assemble
 a. Mast and Substructure
   i. Mast accessories.
   ii. Install flooring, handrails, v-door, stairs, etc.

C. Set and align
  a. Rotary Table
  b. Drawworks
  c. Doghouse
  d. Utility house control panel and foot drawworks console.
  e. Mud Pumps
  f. Brake water/trip tank
  h.Water Tank/Fuel Tank
  i. Catwalks and pipe racks
  j. Cable Trays
  k. Koomey/Junk basket

D. Piping, Fittings, hoses, valves, etc.
  a. Water Supply
   i. To Mud system and mixing system
   ii. Rig Floor
   iii. Brake water system
   iv. Feed and return lines from brake water tank to drawworks drum and brake.
   v. Fuel System
        1. To feed and return lines from duel tank to generator set.
  vi. Air System
        1. Air Supply for accumulator unit and rig floor
        2. Hose connections from rig floor air manifold to drawworks control console, air hoist and other floor tools
  a. To generator set engine starters
  vii. Miscellaneous
       1. Vibrator hoses.
  viii. Electrical Rig Up
  ix. Testing
     1. Fill mud tanks with water
     2. Provide lube products to all machinery.
     3. Provide Fuel for testing
     4. Circulate water through mud system
     5. Run air compressors.
     6. Pressure test all high pressure lines and connections to working pressure
     7. Run all solids control equipment.
     8. Load test generators
     9. Test all SCR assignments.
  x. Rig Down
     1. Rig down and assist in load out on customer furnished trucks.

Delivery : Seventy-five to ninety (75-90) days from receipt of purchase order and down payment.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

Drilling Rigs

----------------------------------------------------------------------------------------------------
Search words (for official use only
MechanicalTrailer Mounted Drilling Rig for Sale
1000HP Land Rig Dealers
1000 HP Mechanical Trailer Drilling Rig for Sale
1000HP land Rig For Sale
1000HP Drilling Rig for Sale - Mechanical Trailer
Drilling Land Rig for Sale - 1000 HP
1000 HP Land Drilling Rig For Sale
Used 1000hp Mechanical Trailer for Sale in USA
1000hp Land Rig Builders

----------------------------------------------------------------------------------------------------

 
1998 Built Platform Supply Vessel for sale
Worldoils Marketplace
1998 Built Platform Supply Vessel for sale

Worldrigs ID: WR2179

84M Platform Supply Vessel for Sale
1998 Built Platform Supply Vessel for sale
PSV for Sale

General
Built : 1998
Class Definition : 1A1 Oilrec SF LFL* E0 Dynpos-AUTR|
DK(+) HL(2.8)

Principal Dimensions

LOA : 84.38 m
Breadth mld : 18 m
Summer draft : 6 m
Deadweight : 4587 t
Lightship : 2314 t
Gross tonnage : 3061 t

Power
Bhp : 9100

Thrusters
Bow thruster : Ulstein 375 TV, 1200 hp
Azimuth thruster: Ulstein TCNS 73 / 50 - 180 1200 hp
Stern thrusters : 2 x Ulstein 150 TV, 800 hp each

Cargo Deck
Deck space : 956 m2
Deck strength : 5.00 t / m2 (10 t / m 2 aft of frame 26)

Cargo Capacity Summary
Fuel oil : 1208 m3
Base oil : 230 m3
Fresh water : 1062 m3
Drill water : 1350 m3
Liquid Mud : 677 m3
Brine : 717 m3
Metanol : 167 m3
Dry Bulk : 400 m3
Oil recovery : 1000 m3

Deck Cranes
Starboard crane : GMC 5 t / 11 m 2,5 t / 17 m

Dynamic Position System
Class definition : Dynpos AUTR
Type : Kongsberg SDP 21

Accommodation
Total number of bunks : 37
1 man cabins : 11
2 man cabins : 5
4 man cabins : 3
Mess room / rec rooms : 1

Price & terms : Please enquire using the email form below

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------
Search words (for official use only) :
84M Platform Supply Vessel for Sale
1998 Built PSV for sale
Used Platform Supply Vessel for Sale
84M PSV - For Sale
Platform Supply Vessel - 1998 Built for sale

-----------------------------------------------------------------------------------
 
Anchor Handling Tug Supply DP0 Vessel
Worldoils Marketplace
Anchor Handling Tug Supply DP0 Vessel

Worldrigs ID: WR2053

AHTS DP0 Vessel for Sale
2007 Built Anchor Handling Tug Supply DP0 Vessel


Particulars
Vessel Type : Anchor Handling Tug Supply DP0
Year Built : 2007
Classification :
ABS, A1, AMS, AH, Towing Vessel, Offshore Support
Vessel, Fire fighting Class 1, Special Purpose Vessel.

Details
Length Overall : 59.25m
Breadth : 14.95m
GRT-NRT : 1678/503
Deadweight : 1385
Depth Moulded : 6.1m
Maximum draft : 4.95m
Clear deck Space : 340m² (500 tons total)
Deck loading : 7.5t/m²
Max Speed : 13 kts
Economical speed : 10 kts
Bollard Pull tonnes : 64.3t
Sewage Plant : MARPOL compliant 50 persons
Rudders : Twin high lift
Joystick : Yes

Capacity
Fuel Oil : 537m³
Potable Water : 360m³
Drill Water : 400m³
Oil Based Mud : 370m³
Dispersant : 12m³
Dry Bulk : 187m³
Foam : 12m³

Pumping Rates
Fuel Oil : 1 x 150m³/hr @ 75m head
Potable Water : 1 x 100m³/hr @75m head
Drill Water : 1 x 100m³/hr @75m head
Oil Based Mud : 2 x 75m³/hr @ 75m head
Dry Bulk : 2 x 13m³/min

Machinery
Main Engines : 2 x Caterpillar 3516B 2525kW
Generators : 3 x Caterpillar  3408 340KW
Emergency Generators : 1 x Perkins 52kW
Bow Thruster : Kawasaki 5 t x 1.42 BHP/315kW
Propulsion : 2 x Berg CPP

Accommodation
Berths 4x1, 3x2, 8x4
Total 42

Fire Fighting
Class 1
Monitors 2 x water monitors 1,200m³/hr, 12 bar, 120m throw
Pumps 2 x 1400m³/hr

Deck Equipment
Towing Winch
Type : Karmoy hydralic double drum waterfall
Pull : 150t
Brake Holding : 200t
Wire Capacity : 1000m x 52mm

Anchor Handling Winch
Type : Karmoy hydraulic double drum
Pull : 150t
Brake Holding : 200t
Wire Capacity : 1000m x 52mm

Tugger Winch
Number & Capacity : 2 x 10t
Wire Capacity : 15m/min

Other Deck Equipment
Towing Pins : Karmoy SWL 200t
Shark Jaws : Karmoy Fork SWL 200t
Stern Roller : 4m x 1.6 dia SWL 200t
Crane : 3 t x 9m reach
Water Maker : 1 x 3t per day

Lifesaving
Liferafts : 6 x 25 man
Lifejackets : 53
FRC/Rescue Boat/Davit : Rescue boat & davit
Lifebuoys : 8
Immersion Suits : 3

Specialist
Rescue Zone : Fitted
Storage Reel : Capacity 1000m x 52mm wire, 14 tonne pull
 

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) -

AHTS Vessel - 2007 Built - for Sale
Offshore
Anchor Handling Tug Supply Vessel for Sale
2007 Built
Anchor Handling Tug Supply DP0 for Sale
59m length
AHTS Vessel
AHTS Vessel for Sale
---------------------------------------------------------------------------------------------------------

 
Ingersoll-Rand DM25SP Rotary Blast hole Drill Rig for Sale
Worldoils Marketplace
Ingersoll-Rand DM25SP Rotary Blast hole Drill Rig for Sale

Worldrigs ID: WR1384

Ingersoll-Rand DM25SP Rotary Blast hole Drill Rig
Used Ingersoll-Rand Rotary Blast hole Drill Rig for Sale

Model: DM25SP Rotary Blast hole Drill Rig
Manufacturer: Ingersoll-Rand
Year: 1994
Condition: Used

Description :

1994 Ingersoll-Rand DM25SP Rotary Blast hole Drill Rig
Down The Hole (DTH) Single Pass
Meter Reads 8,754 Hours
A/C Rops
Powered by Cummins NTA 855C Diesel Engine @ 450 HP
IR HR2 850 cfm / 350 psi Air Compressor
750/300 Air Compressor
Dual pole battery isolators lockable
Ground level emergency stops
Heldweld safe access steps (retractable)
600mm cab access walkways etc.
MDG 15 compliances
Location : Australia

Price & terms : Please enquire using the email form below.       

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.
We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

Ingersoll Rand Rigs

Water Well Rigs

-----------------------------------------------------------------------------------------------------------------------

Search words(for official use only) :
Ingersoll-Rand DM25SP Rotary Blast hole Rig for Sale
1994 Built Rotary Blast hole Drilling Rig for Sale
Ingersoll-Rand Rotary Blast hole Rig for Sale
Used
Ingersoll-Rand DM25SP Rotary Blast hole Rig for Sale
Ingersoll-Rand DM25SP Drilling Rig for Sale 
1994 Built Drilling Rig for Sale in Australia

---------------------------------------------------------------------------------------------------------------------

OIME 3000 Drilling Rig for Sale
Worldoils Marketplace
OIME 3000 Drilling Rig for Sale

Worldrigs ID: WR2452

OIME 3000 Drilling Rig for Sale
3000HP Mexico Refurbished Drill Rig for Sale


Description:

3000 HP Mexico Refurbished 2016

Drawworks : 3000 HP., 680 Ton. to 12 lines
Mast height : 146 feet, (57.48 mts.), 680 ton.
Substructure height : 32 feet, (9.7 mts.) 630.4 ton. (static load)
Rotary Table : 371/2 inches, 650 ton

Power system :
4 engines CAT D-399, 1,300 HP, 1,200 rpm
4 AC generators KATO: (3) 1,287.5 KVA and (1) 1,250.5 KVA,
600 VCA, 3 PH., 60Hz.

Power Control Room (PCR):
4 power conveter module (SCR), with main breaker 1,600 amps.
to 9 DC motors 1000 hp: 3 to drawworks and 6 to mus pumps.

AC Transformers :
(1) 1,000 KVA, 600/480 VAC
(1) 500 KVA, 600/208-127 VAC
(1) 112 KVA, 480/208-127 VCA
(1) 25 KVA, 480/240 VCA
(1) 25 KVA, 600/208-127 VCA

Motors Control Center (MCC):
480 VAC, to AC motors to auxiliary loads from rig including lighting system.

Component          Manufacturer   Model         Capacity/Horse Power
                                
(Type)       (Fuel (Diesel)      (3,000 HP)
                                                  Electric AC/DC)
Drawworks              OMIE           Hercules E-3000 3000 HP, 612 ton. with 3 DC motors 1,000HP.
Mast                       PARCO        ---------               1,500,000 pounds (680 Ton.) 146 feet (44.5mts.)
Crown block           PARCO        7-60                    760 Ton.
Travelling block     Continental 
                              EMSCO       RA-60                  750 Ton.
Rotary table          IDECO         375-E                   37-1/2 ", 650 Ton.
Wire line achor     NATIONAL   TIPO EB               54.4 Ton 
                             OILWELL 
Power generation  CAT          D-399                    4 Engines 1,300 HP.
                               KATO      1030-685361111  4 AC Generators:(1)1,287.5 KVA,(3) 1,250.5KVA
Power control system ROSS    1202                    4 SCR's (with breaker 1,600 A)
                                   HILLS
Mud pumps       Gardner Denver  (1) PZ.11           3 Triplex pump 1,600 HP.
                          Lanzhou              (2) 3N81600 
Koomey control  KOOMEY            T20120-3S        3,000 psi
system 

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------------
Search words (for official use only) :
OIME 3000 Drilling Rig for Sale
3000HP Mexico Refurbished Drill Rig for Sale
Mexico Refurbished Drill Rig for Sale in USA
OIME 3000 Drilling Rig in USA
3000HP Refurbished Drill Rig for Sale

---------------------------------------------------------------------------------------------------------------

 
Offshore Accommodation Module for Rent or Sale
Worldoils Marketplace
Offshore Accommodation Module for Rent or Sale

Worldrigs ID: WR1484

Offshore Accommodation Module for Rent
20 Person  Accommodation Module
Offshore Accommodation Module for Sale


Specifications

Two level 20 person  accommodation module
10 x 2 man cabins with en-suite bathroom
5 x cabins per level
Internal linking corridor
A60  IMO/SOLAS Safe Area, ABS Regulations
Pressurised with automatic shutdown
HVAC, Climate control
Smoke detection
Sprinkler system
Lightweight 
Small foot print
Easy hook-up

10 Spacious double cabins with en-suit bathroom
5 x cabins per level
Linking internal corridor
Double cabins with en-suite bathroom
Climate control
A60 window per cabin
Desk, chair and reading light
Storage space with locks
Bunk beds with drawers and lighting
Blackout curtains
TV , internet and telephone connection
Bedding and towels (Optional)

Dimensions and Weight
Module Type 1 :
Dimensions : 17,6m x 5,45m x 7,75m.
Weight : 70 Tons.
20 Man Module

Module Type 2 :
Dimensions : 19,9m x 5,35m x 7,75m.
Weight : 72 Tons.
20 Man Module

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------------
Search words (for official use only)
Offshore Accommodation Module for Rent or Sale
Offshore Accommodation Module for 20 person
Accommodation Module for Rent
Offshore Accommodation Module for Sale

---------------------------------------------------------------------------------------------------------------

 
300ft Jackup For Sale - 1981 built
Ideco 725 - 750 HP SCR Drilling Rig
Worldoils Marketplace
Ideco 725 - 750 HP SCR Drilling Rig

Worldrigs ID: WR1603

Ideco 725 - 750 HP SCR Drilling Rig for Sale
SCR Drilling Rig for Sale in USA
750 HP Ideco Drilling Rig for Sale


Description

Ideco 725 
750 HP SCR Drilling Rig 
10,000' Depth Capacity
USA


Drawworks : IDECO 725E - 750 HP, powered by DC Traction Motor
Depth Capacity : 10,000'  (1-1/8" Line)
Power System : 3 - CAT D398; 800 kW Generator; IPS SCR
Mast : DRECO 127' (Rated at 340,000 lbs on 8 lines)
Substructure : DRECO One Piece Sub (Clear Height = 10'-6", Floor Height = 13'-6")
SCR House : IPS 3x3
Block & Hook Load : 150 Ton Block & Hook

Swivel : 200 Ton
Rotary Table : National 20.5"
Mud Pumps : 1 Each National 8P-80, and National 9P-100 Pumps
Mud System : 600 Bbl Total
Shale Shaker : 1 - SWACO Mongoose
Solids Control : Single Cone - Desander;  8 Cone - Desilter

BOP Equipment : 1-13-5/8 Shaffer Posi Loc Double Gate - No Annular
Accumulator : KOOMEY - 5 station with 18 bottles (12 gallon each)
Choke Manifold : 4" x 3" (5,000 psi)-7 Gate Valve and Watermelon
Fuel & Water Tanks : Fuel - 9,000 gal;  Water - 400 Bbl
Boiler : NO
Drill Pipe : 4-1/2" XH Connection - 5200 Feet
Drill Collars : 10 Each 6-1/4" Collars, 2 Each 8" Collars
Camp : 1- Each 12 X 50 Rig Manager Shack

Price : US$ 2,300,000

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


-------------------------------------------------------------------------------------------
Search words (for official use only) :
Ideco 725 Drilling Rig for Sale
750 hp SCR Drilling Rig
10,000' Drilling Depth Capacity Rig in USA
Ideco Drilling Rig for Sale
Land Drilling Rig - 750 hp for Sale in USA
Ideco SCR Drilling Rig for Sale
750 hp - Ideco 725 Land Drilling Rig

-------------------------------------------------------------------------------------------

 
Housing for North Dakota
Worldoils Marketplace
Housing for North Dakota

Worldrigs ID: WR1007

Fast Build Housing For Eagle Ford Shale
Quick Build Houses For Eagle Ford Shale
Modular Houses for Eagle Ford Shale
Housing for Eagle Ford Shale


These houses are built in USA and copying to the US regulations.
They can be manufactured fast and can be built fast too.

This is intended for middle level managers
and excutives (slightly larger versions).

We can provide many types of housings and many types of configurations
to suit your budget and your requirements.
We can also handle your waste water treatment.

These are ideal for the shale areas where the houses can be constructed fast
using the houses that we provide.

Price & terms : Please enquire using the email form below
or please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.
 

--------------------------------------------------------------------------------------
Search words (for official use only)
Fast Build Housing for Eagle Ford Shale
Modular Houses for Eagle Ford Shale
Urgent Build houses for Eagle Ford Shale
Quick Build Houses in USA
Fast Build Houses in USA
Houses for Eagle Ford Shale For Sale
Quick Build Houses For Eagle Ford Shale
Houses for Eagle Ford Shale

------------------------------------------------------------------------------------
 
Ingersoll-Rand T3W Drill Rig for Sale
Worldoils Marketplace
Ingersoll-Rand T3W Drill Rig for Sale

Worldrigs ID: WR1033

Ingersoll-Rand T3W Drill Rig for Sale
Ingersoll-Rand T3W Drilling Rig - 2004 Built - For Sale

Model : T3W Drill Rig
Manufacturer : Ingersoll-Rand
Year : 2004
Condition : Used

Description :

2004 Ingersoll-Rand T3W Drill Rig
CAT C15 Diesel Deck Engine (Tier II)
Ingersoll-Rand 1070 cfm / 350 psi Air Compressor
Rod Spinner
Rod Loader
18K Winch
Includes 400 ft of used drill pipe (20 ft x 4-1/2” x 2-7/8" IF Thread)
10,000+ Hours
Mounted on a 2003 International 7600 Truck
CAT C13 diesel engine (Tier II)
10 Speed transmission
41,000 Miles
36 ft L x 13 ft 5" H x 8 ft 6" W and 57,000 lbs add 3,000 lbs with pipe

Location : USA

Price & terms : Please enquire using the email form below.       

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
2004 Built Ingersoll-Rand T3W Drilling Rig
Ingersoll-Rand T3W Used Drilling Rig for Sale
Used Drilling Rig for Sale
Drilling Rig - Ingersoll-Rand T3W for Sale
Ingersoll-Rand Land drilling Rig for Sale in USA

-------------------------------------------------------------------------------------------------------
Cabot 550 Portable Drilling Unit for sale
Worldoils Marketplace
Cabot 550 Portable Drilling Unit for sale

Worldrigs ID: WR2163

Cabot 550 Portable Drilling Unit for sale
600HP Portable Drilling Unit for sale


Description
Drawworks
Rebuilt Cabot 550 drawworks with new Mckinney PD 150 water brake
and new brake pads. (2) new Kinecor hydraulic catheads. (2) new braden
PD12 hydraulic winches. Powered by new John Deere 600hp diesel motor
6135H485, Allison transmission CLBT5860DB.

Mast
Franks Cabot 98' 4-leg telescoping double mast, 250,000#SHL, hydraulically
raised and scoped with 5 sheave crown block and 2500' of new 1/1/8" drill line.
New sala block mounted on derrick.

Trailer
All above mounted on a 3 axle trailer

Substructure
3 piece sub with mud boat and ramp. RKB = 12.5'

Air Compressor
New Quincy D350-10 simplex reciprocating air compressor with 10hp
460/3/60 TEFC magnetic starter NEMA 4 enclosure and 200 gal air tank.
Mounted on mud boat.

Rotary Table
Rebuilt Oilwell SA 17 1/23"

Blocks
New Mckinney Artic T160 block hook

Kelly
4 1/4" x 38' long square drive kelly with drive bushings and kelly schuck.

Kelly Drive Bushings
17 1/2" split master bushings

Mud Pumps

#1 Ideco MM700 duplex pump, belt driven by a Cat D379 diesel engine, #2
Ideco MM700 duplex pump belt driven by a  Cat D379 diesel engine.

Mud System
(1) 275bbl single tank system with a new 4 panel brandt king cobra shale shaker,
(2) 7.5hp agitators, (1) desander with 2-12" cones, (1) Caustic mixing barrell,
(1) eye wash station, (3) 400 watt lights, (1) mud hopper, (2) 5 x 6 centrifugle
pumps with 2-50hp electric motors.

Generator Skid w/Lubester, Junk Box & Wireline
Generator, junk box with vdoor, wireline unit and lubester all on one skid. Skid is
40'3" long x 14'11" wide. Wireline unit is a new five star 15,000, Generator is a
Cat 320kw powered by a Cat 3408 PC motor with Eaton 45 kva transformer.

Water Tank & Top Doghouse
New 450bbl water tank with top doghouse hinged to support beams to lower into
water tank.  New water tank is 35' long x 8'5" wide and has 2-3x2 centrifical
25hp pumps, new doghouse is 7' x 14' plus a porch on each end.

Fuel Tank : New 2000 gallon tank with electric fuel pump
Drill Pipe : 192 joints (6048') of 4 1/2" XH yellow band drill pipe
Drill Collars : 12 drill collars 6" - 6 1/4" with 4 1/2" XH connections
Subs : 6 lift nipples 4 1/2" XH pins
Pipe Baskets : 3 pipe baskets on skids
Catwalk : (1) 41" wide x 52' long and 46" high catwalk with pipe groove

Misc
1 new 55' 5000psi 4" kelly hose
2 new 15'4" x 5000psi vibrator hoses
1 new 12'4" x 5000psi vibrator hose
New 2" hoses with 2" high pressure manifold
1-6 mud jet

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


----------------------------------------------------------------
Search words (for official use only) -
Cabot 550 Portable Drilling Unit for sale
Portable Drilling Unit for Sale
600HP Portable Drilling Unit for sale
Portable Drilling Unit - Cabot 550 - For Sale

----------------------------------------------------------------
 
1,800BHP Towing/Supply Vessel
Worldoils Marketplace
1,800BHP Towing/Supply Vessel

Worldrigs ID: WR199

Towing/Supply Vessel for Sale - 1,800BHP 
1998 Built Towing Vessel for Sale

General Specifications

General Particulars :
Year Built : 1998
Class : BKI

Principal Particulars :
Length Overall : 23.04m
Breadth Overall : 8.00m
Depth Moulded : 3.16m
Designed Draft : 2.30m
GRT/NRT : 181 / 108 tons

Machinery :
Main Engine :
2 x CUMMINS KTA-38M
940 BHP each

Steering gear :
Electro-hydraulic steering gear of about 2.0m tons torque

Towing Winch :
Electric hydraulic single drum winch
50 tons breaking pull
1st layer 10 tons pull
Wire Length 350m, dia. 34mm

Propulsion : 
2 x REINTJES WAF 540 (Germany)
2 x Fixed Propeller inside stell nozzles
    
Generators     
2 x PERKINS Gensets T4236
45 kVA / 36kW / 380V / 50Hz / 3Ph

Propellers : 2 X 4 Blade Manganese Bronze Propeller c/w Kort Nozzles

Anchors : Dia. 17.5mm with 2 x 350kg anchors

Performance & Consumption :
Bollard Pull  : 22 Tons
Maximum Speed : 12 knots
Economical Speed : 7 knots
Fuel Consumption : 6 Tons/day
Endurance : 15 days
Clear Deck Space : 16 m2
Deck Strength : 5 Tons/m2

Cargo Capacity 
Fuel Oil : 75 Tons
Fresh Water : 22 Tons

Navigation Equipment
GMDSS (A1 + A2 + A3) : 1 x FURUNO RC-1500-IT
Satellite EPIRB : 1 x MCMURDO MCM-406A
Navtex Receiver : 1 x FURUNO/JRC
Radar : 1 x FURUNO/JRC
Echo Sounder : 1 x FURUNO/JRC
GPS Plotter : 1 x FURUNO/JRC
Gyrocompass : 1 x ANSCHUETZ
Autopilot : 1 x ANSCHUETZ
Magnetic Compass : 1 x SAURA or equivalent
2 Way Portable VHF Radio 3 x FURUNO/JRC

Deck Equipment :
Anchor Windlass :  Miyako Seisakusho GM - LJ

Safety Equipment :
SOLAS compliant

Search words :
Towing/Supply Vessel For Sale
1800bhp Towing Vessel for Sale 
1998 Built Towing/Supply Vessel
Towing Tug in Malaysia
Towing Tug in Singapore
Towing Tug in India
Supply Vessel for India

--------------------------------------------------------------------------------

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------

 
New Unused Ball Mill For Sale
Worldoils Marketplace
New Unused Ball Mill For Sale

Worldrigs ID: WR385

Outotec Ball Mill for Sale
New Unused Outotec Ball Mill For Sale

New, installed and Never put in service.

It is 5 meters by 7.5 meters. and includes all of the ancillary equipment
needed to run and support the ball mill. 

This is for copper, gold, phosphate or any crushing of rock in final process in mining. 

Spares are also available at a negotiated price.

The ball mill is available for immediate inspection.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

--------------------------------------------------------------------------------------
Search words (for official use only) :
Outotec Ball Mill For Sale
Unused Outotec Ball Mill For Cheap Sale
New Outotec Ball Mill For Sale
3200kW Outotec Ball Mill For Sale
------------------------------------------------------------------------------------------

Acker Soilmax Crawler Drill Rig
Worldoils Marketplace
Acker Soilmax Crawler Drill Rig

Worldrigs ID: WR790

Acker Soilmax Crawler Drill Rig for sale
Used Drilling Rig for sale

Model : Soilmax Crawler Drill Rig
Manufacturer : Acker
Condition : Used

Description :

Acker Soilmax Drill Rig
Mounted on a Marooka MST 1500 Crawler Carrier
Hours on Marooka 5,895
Hours on Soilmax approx 500
Also has a removable Hydraulic Chuck, Breakout Wrench, and Table
Table needs to be hooked up to hydraulics
Location : USA

Price & terms : Please enquire using the email form below.   

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------------
Search words (for official use only) :
Acker Soilmax Crawler Drill Rig for Sale
Used Acker Soilmax Drill Rig
Land Drilling Rig For Sale
Used Acker Soilmax Drill Rig for Sale
Soilmax Crawler Drilling Rig for sale  in USA

------------------------------------------------------------------------------------------------

 
Mobile Harbour Crane for Sale
Worldoils Marketplace
Mobile Harbour Crane for Sale

Worldrigs ID: WR1114

Liebherr Mobile Harbour Crane for Sale
2009 Built LHM 400 Mobile Harbour Crane 


Description
:

1 Liebherr Mobile harbour crane Type LHM 400 Litronic

Manufacturer : Liebherr
Type : LHM 400
Year of construction : 2009
 

Crane is appropriate for general cargo handling, spreader- and motorgrap-operation
Version 2-rope-version

Capacity max. approx. : 
104,0 t to 22 m
52,8 t to 38 m
37,9 t to 48 m

Capacity motor-grap-operation :
43,3 t to 34 m
27,0 t to 48 m

Outreach approx. : 10 - 48,0 m
Lifting height max. approx. : 45,0 m

Lifting gear approx. : 0,0-90,0 m/min
Rotating gear approx. : 0,0-1,6 U/min
Luffing gear approx. : 55 sec
Crane travelling gear approx. : 0,0-90,0 m/min
Total weight approx. : 390 t
Price within BROMMA-spreader & SMAG-grab ( 17m³)

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

--------------------------------------------------------------------------------------------------------
Search words -

Mobile Harbour Crane for Sale
Liebherr LHM 400 Mobile Harbour Crane for Sale
Liebherr Crane for Sale
2009 Built Mobile Harbour Crane
LHM 400 Mobile Harbour Crane for Sale
--------------------------------------------------------------------------------------------------------

 
Refurbished Underground Scooptram and Rockbreaker
Worldoils Marketplace
Refurbished Underground Scooptram and Rockbreaker

Worldrigs ID: WR298

Wagner ST-3.5 Underground Scooptram and Rockbreaker
Refurbished Underground Scooptram Loader for Sale
Atlas Copco Wagner ST-3.5 Scooptram with Rockbreaker

Description :

“Refurbished” Wagner ST-3.5 Underground Scooptram and Rockbreaker
An extremely Versatile Machine, which can be used as a Rockbreaker, or
as a Scooptram Loader 

1 Only “Refurbished” Wagner ST-3.5 Underground Scooptram and Rockbreaker

Unit was completely refurbished when fitted with the Rockbreaker Boom
Complete rockbreaker boom attachment (Breaker Not Included)
Includes boom and 3.5 cubic yard bucket attachments (To operate as Scooptram Loader)
Fully hydraulic joy sick operators controls
Low hour Catterpillar 3306 diesel engine

Only 342 hours on unit since rebuild

Tested and serviced Clark Series 28000 powershift transmission, as required
Tested and serviced Clark Series C-270 torque converter, as required
Tested and serviced Rockwell Axles
Tested and serviced fully enclosed (LCB) wet disc service brakes, as required
Tested and serviced spring applied hydraulic released park brakes, as required

Rebuilt ANSUL fire suppression system, as required
New Drive-shafts, as required
New 17.500-25 heavy duty slick mine tires
New or rebuilt hydraulic cylinders, as required
New Wiring, as required
New Hosing, as required
New or rebuilt pumps, as required
New Instruments and Gauges, as required
New pins and bushings, as required
Includes central lube system
Refurbished body, as required
New or refurbished fenders, as required
Cleaned and sandblasted
New paint

Approximate dimensions : 383” long x 77” wide x 65” high
Approximate weight : 38,500 Lbs. (with Rockbreaker Boom)

Inspections : See details below.
This Unit was completely refurbished when fitted with a Rockbreaker Boom and when
desired it can easily be returned for use as an LHD Scooptram Loader.
Although the Rockbreaker Hammer is not Included with the machine,
one can be supplied from an other source, at an extra cost.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------------------------------------------------
Search words :
Wagner ST-3.5 Underground Scooptram and Rockbreaker
Underground Scooptram and Rockbreaker for Sale
Mining Equipment - Underground Scooptram Loader for Sale
Refurbished Underground Scooptram Loader for Sale
Underground Scooptram and Rockbreaker for Mining
Mining Equipment - Underground Scooptram and Rockbreaker
----------------------------------------------------------------------------------------------------------------------------

Disaster Relief Trailer for Sale
Worldoils Marketplace
Disaster Relief Trailer for Sale

Worldrigs ID: WR1328

Disaster Relief Trailer Vehicle for sale
Customized Mobile Emergency Command/Disaster Relief Trailer
Mobile Emergency Disaster Relief Trailer Vehicle for sale
Description

Customized Citadel Class Mobile Emergency Command/Disaster Relief Trailer

1.0 Overall Scale : Chassis and Operations Enclosure
1.1 Vehicle Dimensions
- 13'6” High x 102” Width x 46' Length
- Total length including rear bumper and air-conditioning units not to exceed 46’
- Air ride suspension
- Tandem axle
- Sure Glide EXP section dimensions: one (1) curbside, 52”x112”, two (2) 70” x
150” street side
These dimensions do not exceed the legal limitations of any jurisdiction in
North America.
1.2 Trailer Chassis Specifications
- Model #UC 44/102
- Sure Glide Side Expanding System
- L-Stanchion support system
2.0 Chassis Weight and Axle Loading
Body and chassis shall be in compliance with legal weight limits and
transportation regulations on all public highways in North America. Commercial
Driver’s License shall be required. No special permits shall be required for travel
on any public highway in North America.
3.0 Body Construction: Methods and Materials
General Statements and Descriptions
The mechanical design and construction of the unit shall be such that the
Client, with proper maintenance, can expect at least 15 years of use.
All aluminum-to-steel joints are insulated with High Molecular Density
Polymer to prevent corrosion due to galvanic electrolysis.
Aluminum skin shall be .090 at bulkheads and sides.
Fabrication and Construction practices shall utilize proprietary methods of
MIG Welding and chemical bonding. Lord 500 Series Acrylic Adhesive
shall provide extremely high impact rating and extreme resistance to
thermal and chemical stress.
Frame Description
Trailer shall be of aluminum and steel Frameless Monocoque Structure.
This is a proven design that allows for stress to be distributed evenly throughout
the entire structure; Neither extreme conditions during travel nor lever-action
physics due to the Sure Glide side shall compromise the structural integrity.
- Framed structures will not concentrate the stress at one singular point
- No distortion or twisting will take place; especially regarding the Upper
Coupler Plate where the kingpin is located
This structure was developed for the US Military through computer stress analysis
model design.
The Universal Composite Trailer Chassis meets the following Industrial, US
Government, and US Military standards:
ASTM B209 - Industry Standard specification for aluminum and aluminum-alloy sheet plate.
AWS D1.1 - Structural welding code for steel.
AWS D1.2 - Structural welding code for aluminum
CF Title 49 - Transportation, US Federal highways
FED-STD-595 - Federal standards for paint
MIL-STD-810E - US Military Standards Environmental & Engineering guidelines
MIL-STD-454 - US Military Standards Workmanship
MIL-STD-1472 - US Military Standards Human Factor Engineering
Body Filler products shall not be utilized in any weight or stress-bearing
component of the aluminum body.
3.1 Floor Frame shall incorporate:
- Formed and steel hat sections into Monocoque design.
- 90ksi min. high tensile steel 4” I-Beams
- 90ksi min. high tensile steel 5” I-Beams at leveling legs & bogie frame
- .032” 3003 aluminum sheeting
- additional proprietary methods and materials
3.2 Wall and Bulkhead Construction shall incorporate:
- 12 ga. Galvanneal seal around door jamb and openings
- 1 ½” extruded aluminum hat channel extruded wall studs
- Sections on 16” centers, 1 ½ hat sections as required
- .063 ” T-5454 Aluminum Sheeting for exterior surface
Aluminum skins shall be .090 on expanding side end walls & .090at bulkheads
- To be seamless and rivet-less, smooth auto type look
- Extruded aluminum top rail sections
- Extruded aluminum bottom rail sections.
- Crucial support on the expanding section side shall be gained through use
of 6” by 16” and by 4” by 12” steel tubing.
- additional proprietary methods and materials
3.4 Roof Construction shall incorporate:
- 1 ½” extruded aluminum hat sections on 24” centers
- Extruded aluminum toprail
- One-piece .032 aluminum skin
Pre-tensioned before application to ensure smoothness
Shall only be riveted around the perimeter of the trailer.
Shall be attached to roofbow by means of industrial adhesive.
Shall prevent loosening and subsequent “canning” (bubbling) due to contraction
and expansion, as will occur if rivets are used to fasten roof skin to roof bows.
To be coated with Tempcoat
- Provide and install one antenna bridge
- Provide and install one weatherproof access port for cabling
- Additional proprietary methods and materials
3.5 Roof Platform
- Provide and install one 8’ x 8’ roof platform with collapsible OHSA rails,
location to be determined, With rear access ladder
3.6 Exterior Finish:
- Scepter Series
- Full preparation to consist of all caulking, trimming, sanding, etching
(zinc chromate chemical etching agent) and all necessary steps to
ensure overall aesthetic “as-new” quality for functional life of vehicle
withproper on-going maintenance.
- All steel attach points will be treated with anti-corrosion agent and
isolated form all aluminum surfaces
- 2 coats primer and 1 coat white Aircraft-Grade Acrylic Polyurethane
DuPont Imron paint
- All bay door systems will be finish in side as described above.
- Body to be undercoated with anti-corrosion agent
3.7 Logo
- Per customer specifications
3.6 Axles and Suspension
3.6.1 Axle Configuration
- Shall incorporate Watson Chalin TA-250-16 Series Tandem axle
- Configuration (subject to change upon Engineering with Client)
- Shall be provided with Watson Chalin Air Ride System, TA-250-16 with
ABS, and rigid axle configuration
- 16” air bags, capacity of 22,500 lb. per single axle.
3.6.2 Wheels and Tires
- Aluminum 17/5” wheels with 215-75R-17.5 tires
- Polished aluminum outer wheels
- Anti Sail mud flaps
3.7 Proprietary Expanding Side Mechanism
3.7.1 Expanding Side Dimensions
- Trailer System shall include three (3) Expanding Sides
Dimensions to be determined targeted as follows
One (1) Curbside 112” long x 70” expansion
Two (2) Streetside 150” long x 70” expansion
OR
Optional:
One Large Proprietary Streetside Expanding System
3.7.2 Method of Operation
Manual Crank design shall be constructed such that ease of operation allows
one person to fully extend section with one hand; 9 turns, in no more that 20
seconds.
- Proprietary construction shall operate by means of a manual crank, located at
the rear bulkhead of the trailer.
- The crank shall turn a tubular shaft that extends from the rear bulkhead to the
center of the expanding side drive shaft
- 2:1 gear reduction via chain drive fro crank shaft to drive shaft.
- The tube shall be connected to four (4) bearings; with two (2) linear bearings
at each end of the expanding section.
- This connection shall be rack & pinion, to ensure that each end of the
expanding section travels in a parallel fashion;
Expanding section shall remain square upon opening and closing.
- Large, Internal Security hardware, operating on a cam-style lever principle,shall aid
in sealing the Sure Glide section tight to trailer for travel
- Value Added Feature- Eliminates I-Beam Frames in the storage bays
3.7.3 Expanding Mechanism Floor Description
- Shall be comprised of six (6) folding panels by Plascore.
- Panels shall store folded against the interior wall of the expanding section.
- Each panel will be held in place by a large, tempered knobbed bolt, which
shall thread into a receiver securely fastened into the expanding section wall
Multiple panels (as opposed to one or two heavy, large panels), shall enable the
easy set up and strike of the expanding section floor manually.
3.7.4 Expanding Section Anti-Icing Measures
- Expanding Section roof shall be constructed with 2” slope from trailer outward
- A system of heating strips shall be employed to keep expanding section roof
free of ice and snow when extended.
low-wattage strips shall maintain the roof skin of the expanding
section within a temperature range of 45 to 75 degrees Fahrenheit
(fluctuation due to proximity of any given space on roof to location of
heat strip.)
Shall prevent snow/ice accumulation, in conditions ranging from
freezing rain to 6”/hour snowfall.
4.0 Undercarriage Storage Bays (Belly Bays)
General:
Shall be integrated into the skirting around the perimeter of the vehicle,
beneath the chassis frame, such that the body is streamlined.
Quantity 5 to 7 Storage Bays shall be provided for each side of vehicle,
dependent upon Client needs in terms of size of each Storage Bay.
- Ground Clearance shall be 12” between Kingpin and Tandem axles
- Ground Clearance shall be 15-18” aft of rear axle
4.1 Special Design Features
- Bay floors shall be of “sweep-out” construction, with no
raised edges to pool water or obstruct loading
- Bays shall integrate a warning system for
door openings
- Bay interior to be obstruction-free with the exception of 1”
steel tube supports, which shall be in line with the exterior dividers
between the bay doors
- To include 3/8” x 4” “Rub Rail” guards that extend ½” laterally
beyond the bay doors for protection in cornering situations.
- To include 3/8” x 3” x 4” Skid Rail for thorough protection in bottom-out
situations.
4.2 Material
- 10-gauge T-6061 Aluminum
- 2” x 4”aluminum c-channel construction
- Bay interior to be constructed of .090 Aluminum to prevent load shifting,
and enhancing appearance when bay doors are open
- Aluminum structural integrity exceeds demands of Remote Television
Operations
- 800 lbs. lighter than similar Storage Bays constructed of Stainless Steel.
4.3 Weatherproofing/Security
- Furgocar 14” integral locking handles operating by a locking cam-style
lever mechanism.
- Perimeter of each bay door shall seat on 90 degree exterior surface
and trimmed in crushable gasket, rendering the bay waterproof.
- Doors shall be held in the “open” position by means of gas charged struts; the
geometrical positioning of which shall aid in both opening and closing.
- Hinges to be stainless steel, continuous piano hinges.
4.4 Equipment to be permanently stored in Storage Bays shall include:
Isolation Transformers, which shall surrounded by an expanded metal
screen, painted safety yellow.

Custom Designed Aluminum Power Frame, which shall contain
all power entry panels, tap switches, analog meters, and all other
elements of Main Power Control Panel. Rear of frame shall be protected
by means of an expanded metal screen painted safety yellow.
Extreme care in engineering shall be in place to insure a minimal
power system foot print.
- External warning system for open bays
5.0 Exterior Doors
- Quantity two (2) 32” wide personnel door
- Four (4) Sets of Keys
- External warning system for open doors
5.1 Personnel Doors, Entrance Stairs Construction shall incorporate:
- 2” x 2” x .125” T-6061 Aluminum Alloy square tubing
- .125 T-6061 Aluminum Alloy skin
- Door frame- Galvaneel Steel
- Reinforcement to prevent bowing shall be gained through use of 5” aluminum hat channel
- Shall be supplied with Yale panic-bar exit devices and LCN single-action track
door closers (with no protruding “elbow” extending into operations interior).
- Stainless steel plates shall be mounted beneath (hand wear) exit device and
at bottom of door (kick wear) to guard against wear upon repeated exits.
- Custom manufacture10-gauge aluminum “Grip Strut” safety grating expanded
metal stairs; stairs shall be full width (36”)
- Stairs for side personnel door to be automatically deployed via remote switch.
- Stairs for rear personnel door to be height adjustable by means of knurled
knob which shall fix sliding feet. No spring mechanism, which is subject to
corrosion, shall be employed.
- One (1) handrail shall be custom manufactured and provided for each set of
stairs; to be constructed of extruded T-6061 Brushed Aluminum Alloy round
tubing, .125” wall thickness.
6.0 Exterior Functional
6.1 Leveling System:
Provide and install Hydraulic leveling jacks
Capacity 55,000lbs
18” throw
84 sq. in. foot pad
Bubble levels at each corner of vehicle
Remote control
6.2 Exterior Lighting
6.2.1 Clearance Lighting shall be provided and installed
- All clearance lights as required by DOT Regulation shall be supplied
and installed
- Any required reflective strips shall be supplied
- Brake Lights, Tail lights, shall be provided and installed
- All tail lights, reverse lights, brake lights shall be recessed
- Includes high mounted LED tail lights
- All lights to be LED
6.2.2 Exterior Operations Lighting
- Strike Lighting
Provide and install eight (8) HID AC recessed strike lights
Locate two (2) at rear of trailer, four (4) at street side, four (4) at
curbside
6.2.3 Emergency Lighting
Red/Blue LED flashing warning lights on all exterior sides/corners of trailer
Whelen 90BBSFBR
6.3 Awning
- Provide and install two Girard 20409SC5 20’ side by side awnings
Automatic operation
Remote control
Wind sensor
6.4 Exterior Monitor
- Provide and install one (1) 50” Insigna NS-50L240A13 Exterior mounted flat
panel display
- Installed in a weatherproof I/O panel
6.4.1 I/O Panel/Breakout Panel Door
- Fabricate and install lighted enclosures for audio and video cable
bulkheads seated in vehicle exterior.
- Doors shall be constructed of .125 T-6061 Aluminum Alloy
- Shall consist of dual door construction:
The upper ¾ shall consist of a lockable, upward hinged door for
access to entire panel
The bottom ¼ shall consist of a downward hinging door such that it
shall be capable of being left open for cable access; though the panel
itself is inaccessible should the top ¾ door be locked. This enables the
panel to be secured, yet allows all exterior cabling to remain
connected.
- Shall for closure employ a Stainless Steel locking cam-style lever mechanism
- Shall employ gas-charged struts that will keep the door in an open position,
and shall be configured geometrically such that these struts will aid in both
opening and closing
- Interior hold-back latch shall be installed to allow partial opening of door for
cable access and limited panel access
- Perimeter of enclosure shall be a recessed flange, with crushable gasket to
ensure environmental security
- Bottom of enclosure between rails and exterior shall be sloped downward to
prevent any accumulation of rain or snow when open.
7.0 Interior Construction: Methods and Materials
General:
Layouts included in this proposal will be designed to the clients required need
Final layout and determination of production area to be designed by Client and us upon 
engineering meetings to ensure that Client specifications and particular needs are met
7.1 Interior Frame Construction
All interior construction shall be fastened to .125” T-6061 Aluminum
Alloy joists and interior members
- Floor to be constructed of 3/4” Lite plywood
- Ceiling to be constructed of 3/8” Lite plywood
- Interior Sidewalls and Bulkheads to be constructed of 1/4” Space Age
Carbon Fiber Polymer and feather plywood
- All freestanding interior walls to be constructed of 3/8” feather grade plywood
7.3 Operations Area Construction
7.3.1 Mobile Command Area (OCPD)
- Pocket door with window and mini blinds
- One (1) 42’ LG 42CS560 flat panel display
- One (1) NEC-WMK-4655S smart board mount
- Required outlets
- Required Cat 6 ports & cabling
- Four (4) work station group
- Ten (1) high back swivel office chairs with restraints
- Conference table as specified
- Sonex ceiling
- Additional cabinetry with countertop on curbside wall
7.3.2 Fire Command Area (OCFD)
- Pocket door with window and mini blind
- One (1) 42’ LG 42CS560 flat panel display
- One (1) NEC-WMK-4655S smart board mount
- Required outlets
- Required Cat 6 ports & cabling
- Four (4) work station group
- Ten (1) high back swivel office chairs with restraints
- Conference table as specified
- Sonex ceiling
- Additional cabinetry with countertop on curbside wall
7.3.3 Dispatch Area
- Pocket door with window and mini blind
- Three (3) rack system
- Wispermat sound suspression
- Sonex ceiling
- Three (3) work stations
- One (1) 22” Samsung UN22D5003 flat panel display
- Three (3) high back swivel office chairs with restraints
- Required outlets
- Required Cat 6 ports & cabling
- Additional cabinetry with countertops on streetside wall
7.3.3.1 Rack Construction
All EIA Standard equipment racks in vehicle shall be custom manufactured,
utilizing the below specified method. This provides infinite flexibility in
terms of rack dimensions and placement.
- Supply and install 3, or the quantity deemed necessary resultant of
engineering meetings, according to the accepted layout design, custom
equipment racks
- Rack rails shall be constructed of .125” steel
Steel construction provides greater support for equipment
Thicker gauge provides firmer and longer threaded surface for rack
screws to prevent cross-threading
Racks shall be tapped front and rear for industry-standard #10-32 rack
screws
- Rack rails to be securely anchored to floor and ceiling and stabilized laterally
by means of welds to 3mm flat bar hot-rolled steel
- Racks shall be stabilized vertically by means of being fastened to the interior
sidewalls
- Racks shall be stabilized linearly by means of 10 gauge aluminum plates from
front rail to back rail in each rack
- Supply and install AC distribution strips in racks; shall be on individual circuits.
7.3.4 Galley Area
- Lower and upper cabinets with countertop
- Built in microwave oven
Secured coffee maker
5-Gallon hot and cold water dispensing device plumed to exterior drain
Paper towel holder
7.4 Interior Lighting
- All lighting for operations shall consist of dimmable, recessed, aimable
(Manufactured by WAC, Inc.) lights
Each bank of WAC lights shall be on an individual, dimmable circuit
Lighting shall operate on either DC via provided inverter, or shore AC.
Provide and install additional fluorescent lighting for rack maintenance
- LED set and strike lighting with red situation lighting option
7.4.1 Exit Signs
- Supply and install exit signs with battery backups
7.4.2 Emergency Lighting
- Emergency 12V lighting with battery backup
7.4.3 Safety Equipment
- As required smoke detectors
- As required fire extinguishers
- Set of three reflective safety triangles
- 20 industrial type first aid kits
7.4.5 Paging System
- Provide and install one interior paging system
One (1) Bogen DRZ35 Speaker
Six (6) Bogen S86T725PG8U
Two (2) Bogen SAH5
7.5 Fit and Finish
- All Custom Manufactured Furnishing to be oak, custom milled,
prepared, and finished
- Floors covering shall be Dura Step .125” rubber panels, pattern and color to
be determined by Client
- All exposed tabletops and console surfaces covered with 3mm horizontalgrade
Formica, color to be determined by Client
- Front edge of all consoles shall be fitted with edging consisting of rounded
oak (“bull nosing”)
- Walls and cabinets shall be covered with magnetic
dry erase
- Ceiling shall be Sonex Pyramid Acoustic Foam
Sonex Tiles shall reside in custom Light Oak Ceiling Grid
- Access floor panels to match to include aluminum
extrusion
8.0 Environmental Control
8.1 Insulation
- Insulation factor on walls of R14 in concert with forced-air Air-Conditioning
system shall provide environmentally secure environment
- Provide and install full thermal insulation on outer walls, floor, doors and
ceiling
Insulation to be Blue Dow 2” Owen Corning Polystyrene
Includes continuous vapor seal
PolySeal foam to ensure vapor-tight insular seal
- Insulation factors as follows: R14 walls, R14 ceiling, R14 floors, R9 doors,
and R2 door seals
8.2 Air Conditioning
- Mobile Air Conditioning System, with fresh air quietly ducted
directly into the equipment racks and personnel space. Fresh air shall
be supplied to personnel areas and racks via plenum in ceiling, return
shall be via sub-floor to ensure circulation directly through equipment
racks, such that environmental demands of HPA Equipment will be
accommodated. Air plenums shall be designed and installed to provide
redundancy should an air conditioning unit fail.
- Supply and install two (2) Dimplex 4-Ton Air Conditioning System
96,000 BTU Capacity
2-Stage Operation
Hot Gas Bypass
8.3 Heat
- Unit shall include integral 10,000 Watt heating unit
9.0 Electrical System
9.1 Power System
9.1.1 Power Source: Split Environmental & Technical
The Vehicle shall be powered by means of a 150A power source, 3 phase.
Shall be capable of being powered by means of:
- System shall provide two completely separate legs of AC;
Technical shall power all equipment, and specified receptacles
Environmental, which shall power all lighting, air conditioning,
and specified receptacles.
To include three (3) power meters in bay system, analog and
digital.
- Two (2) Hevi-Duty SOLA Isolation Transformers shall be provided and
integrated
One (1) 10kVA for Technical loads
80A circuit breakers integrated
One (1) 30kVA for Environmental loads
125A circuit breaker integrated
- Each Transformer shall be provided with tap selects
Voltage taps shall step through positions of 190, 200, 210, 220,
240,and 270 Volts.
Voltage tap shall be selectable by means of Kraus & Naimer Tap
Select switches
Voltage tap shall be selectable by means of Kraus & Naimer Tap
Select switches
Voltage Tap Selects shall provide maximum flexibility for powering Trailer
from most available on-site power sources.
9.1.2 Power Entrance and Monitoring
- Analog meters by Yokogawa shall be provided and installed adjacent to
the input connectors, monitoring:
Amperage
Voltage
Cycle
Analog meters by Yokogawa shall be provided and installed on panel in
vehicle interior, allowing monitoring during operations of:
Amperage
Voltage
Cycle
NOTE: We provide and recommend analog meters, as digital meter may not
function at extreme temperatures
- Supply and install two (2) 50' shore power cables
Entertainment rated 200A 600V
Provide one (1) “pig-tail”s
Supply and install Cam-lok power input connectors and panel, adjacent
to monitoring panel
9.1.3 Transmission and Termination
- All Electrical wiring to utilize THHN insulated stranded copper wire
All Electrical wiring to be numbered ends and length in strict
accordance to “as-built” drawings which shall be provided to the
Client
All Electrical wiring shall be dressed in accordance with highest
industry standards
All wire runs shall be routed through EMT and flexible conduit.
- Provide and install Hubbell wall receptacles in Operations Interior
Receptacles powered by the Technical leg shall be white in color, and
complete with grounding to technical ground system
Receptacles powered by the Environmental leg shall be ivory in color
These outlets shall be located in areas specified by the Client in
Engineering meetings with us such that specific Client needs are met
- Sufficient receptacles, outdoor GFI receipticals
- Interior/exterior wiring and electrical items to have radio & magnetic
interference- Radio Interference Suppressor VDCA03
- External ground cable capability
9.1.4 Grounding
- Grounding of the technical equipment within the vehicle shall follow standard
grounding practices
9.1.5 Low Voltage System
- A 12V DC system shall be provided and integrated
Power Source for 12v DC shall be two (2) Group 27 deep cycle
batteries to be housed in a vented, anti-corrosive enclosure.
The DC distribution system will be fully fused and will power:
- Interior lighting, activated by a mechanical timer located at personnel door
such that interior DC powered devices will not be unintentionally left running
- The strike or set-up lighting system
- Lighting in Belly Storage Bays
- Audio/Video Bulkhead enclosures
- Provide and integrate Inverter/Charger
81-0153-12 Fleet Power 1500-12MP
Rated 1500W at 120VAC
Shall power all selected interior lighting
Shall power all selected exterior lighting
10.0 Generator
10.1 Provide and install one (1) 56kW Whisper Watt diesel generator
- Quiet Pack Integratio
- Full switch over system
11.0 Communications Equipment
- Integration of customer supplied communications equipment
- Prewired for CSE audio vision equipment, label all runs from rack to radio
locations
- Off air reception Direct TV H25 antenna
- Cat 6 cabling and patch by Leviton
- Three (3) back-up cameras
- Three (3) Rhino CL-515SH600 Dome camera systems
- Three (3) wall mounted digital atomic NIST Clocks Traceable 1076
Price & terms : Please enquire using the email form below.
If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.
We can arrange delivery of equipment and towage of rigs and vessels where needed.
The details mentioned above are believed to be accurate but are not guaranteed.

--------------------------------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Mobile Emergency Disaster Relief Trailer for Sale
Custom Design Disaster Relief Trailer Vehicle for Sale 
Disaster Relief Trailer Vehicle for Sale
Customized Citadel Class Disaster Relief Trailer For Sale
Citadel Class Mobile Emergency Command/Disaster Relief Trailer
Trailer Vehicle for Sale

-----------------------------------------------------------------------------------------------------------------------------------
 
 
Propane LPG Tanks for Sale
Worldoils Marketplace
Propane LPG Tanks for Sale

Worldrigs ID: WR2871

Propane LPG Tanks for Sale
LPG Propane Tanks - 30,000 Gallon - For Sale


Description :

Built : 1973
ASME certified
250 PSI
Dimensions : 109"DIA x 67ft OAL Approx.

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
30,000 LPG Propane Tank - 1973 Built - for Sale
1973 Built LPG Propane Tanks for Sale
30,000 Gallon Capacity LPG Tank for Sale
Used Propane LPG Tanks for Sale
Propane Storage Tanks for Sale

----------------------------------------------------------------------------------------------------------
 
Skid Mounted Electrical Rig - National 1320UE
Worldoils Marketplace
Skid Mounted Electrical Rig - National 1320UE

Worldrigs ID: WR1058

National 1320UE Skid Mounted Electrical Rig for Lease
Electrical Drilling Rig for Charter
National 1320UE Electrical Drilling Rig - 1978 built
2000hp Skid Mounted Electrical Rig - National 1320UE

Specification
Built : 1978
Classification : API 4F
Drilling Depth :
19600 Ft / 6000m w/ 5” Drill Pipe

Power Supply Systems
Engine plant : Caterpillar
Quantity : 5
Type : D-399 TA
Max. cont. Power : 1215 HP/ 1200 rpm

Mud System
Mud Pumps -
Make : Honghua & Qty : 2 nos. & Make : National & Qty : 1 nos.
Type/Model/Rating : Triplex/ 1600 HP (2 nos.) & 1300 HP (1 no.)
Drive :
2xGE752 AUI
SCR with 5 Bay

BOP Equipment
Annular BOP -
21 ¼” - 2M W.P. Make : Shaffer, WP : 2,000 psi & 13 5/8"- 5M W.P.
Make : Shaffer, WP : 5,000 psi.

Double Ram BOP -
Make : Cameron,
Type : U c/w 13.5/8" 10 M

Solid Control Equipment
Shale Shakers :
Qty. : 2 nos., Make : NOV Brandt, Model : King Cobra Linear Motion
& Capacity : 1000/1200 G.P.M.

Degasser Qty. :
1 nos., Make : NOV Brandt,  Type : DG-5 & Capacity : 500 G.P.M.

Centrifuge : MI-Swaco, Model : 518

Mud Cleaner : Qty. : 1 nos., Model : Mini Cobra 3-Panel 10/ 2 (LMSS)

Drilling Equipment
Derrick : Branham Industries
Type : Cantilever, 3-78-DI-M002
Dimensions : 156 Ft x 32 Ft.
Static Hookload : 1,330,000 Lbs (665 T - Short)
No. of lines : 12

Substructure : Branham Industries
Clear Height : 25 Ft.
Setback Capacity : 800000 Lbs
Rotary Capacity w full Setback : 13300000 Lbs

Drawworks : National
Type : 1320 UE
Rating : 2000 HP
Drive : 2 x GE 752
Drilling Line : 1 3/8”
Electric brake : Baylor Brake7838

Crown Block : National
Type : 760- FA
Rated capacity : 500 T
Sheaves / Groove : 7x60”, 1-3/8”

Traveling Block : National
Model/ Type : B 660 G 500
Rated Capacity : 500 Tons
No. of Sheaves : 6

Hook : National

Top Drive : Varco, TDS – 3
Rated Capacity : 500 Tons/ 800 HP
Drive : Electric, 2 x 400 HP AC

Swivel : National
Type : P-500
Dead Load rating : 500 Tons
API Bearing Rating  : 335 Tons

Rotary Table : National
Type : C-275
Independent Electric Drive : 1xGE752 AU
Opening : 27-1/2”

Mud Tank System
Active Tanks Volume : Qty. : 3 nos., Capacity : 1200 bbls.
Reserve Tanks Volume : Qty. : 2 nos., Capacity : 970 bbls.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

 Land Drilling Rigs


----------------------------------------------------------------------------------------------------------
Search words (for official use only) :
National 1320UE Skid Mounted Electrical Rig for Lease
Electrical Drilling Rig for Charter
National 1320UE Electrical Drilling Rig - 2000hp
2000hp Skid Mounted Electrical Rig - National 1320UE
1978 built Skid Mounted Electrical Drilling Rig for Lease
National 1320UE Skid Mounted Electrical Rig - 1978 built
Electrical Drilling Rig for Lease
1978 built Electrial Drilling Rig for Charter

------------------------------------------------------------------------------------------------------------

 
Self Propelled Barge for Coal Carrier or Multipurpose
Worldoils Marketplace
Self Propelled Barge for Coal Carrier or Multipurpose

Worldrigs ID: WR702

Self Propelled barge for charter
8000dwt Self Propelled barge for charter
Self Propelled coal carrier barge for sale
2005 built Self Propelled barge for sale

Specifications

General
Class : ABS
Built : 2005
SS Due : 1-10-2011
DD Due : 17-11-2013

Gross tonnage : 4,181 ton
Net tonnage : 1,255 ton
Dead weight (summer) : 8,047 ton
Coal Capacity : 7,700 ton

LOA : 91.44 M
Lenth between perpendiculars (LBP) : 89.31m
Breadth : 24.00m
Depth : 7.00m
Summer draft : 5.00m
Light weight draft : 1.09m

Light vessel weight : 1,886.7t
Deck space : 71.25 X 20.43m
Side board : 5.25m
Full draft : (TPC) 21.38 t/cm (summer)

Service speed :
Laden without GTEE : 6.50 knot/ abt 6.8 ton of MDO
Ballast without GTEE : 6.50 knot/ abt 6.5 ton of MDO

Main engine :
2 unit CAT 3512B DI-TA MAR diesel : 2 X 1,280 HP (RPM 1,600)
Aux. engine :
(2 unit cummins 6 CTA-8.3D9M) : 2 X 954 KW

Auxiliary fuel consumption : 0.55 ton/day
Tanktop strength : 7 mt/sq.mtr
Thruster : 2 units of HRP
Ballast water tank : 3,099 cbm
Fresh water tank : 146 cbm
Fuel oil tank (MDO) : 210 cbm
Keel to mast : 22 mtr

MMSI
Inmarsat  sailor thrane and thrane :1 unit Inmarsat mini-C (GMDSS/SSAS)
VHF (DSC) Furuno Type FM 8500 : 1 Unit
Radar (ARPA) Koden MDP 1820P : 1 unit marine radar
GPS Furuno Type GP-32 : 1 unit
Navtex ICS NAV 5 GMDSS Type NR -50 : 1 unit
W.Fascimile JRC JAX-9A : 1 unit
EPIRB Furuno : 1 unit
Echo Sounder Furuno Type FE-606 : 1 unit
AIS Samyung SI-30 : 1 unit

Vessel fitted with side walls abt 4.8 metres high allowing loaders/truck access.

Trading Arabian Gulf area

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
------------------------------------------------------------------------------------------------------------------------------
Search words(for official use only) :
Self Propelled barge for charter
Self propelled 2005 built Coal Carrier barge for Sale
Self Propelled Barge for coal carrier or for multipurpose

Self Propelled barge for charter - for Coal Carrier or Multi-purpose
8000dwt Coal Carrier Barge for Sale - Self propelled
2005 built Self Propelled Coal carrier barge for charter
-------------------------------------------------------------------------------------------------------------------------------

 
Fast Supply Vessel for Sale
Worldoils Marketplace
Fast Supply Vessel for Sale

Worldrigs ID: WR2835

FSV - 2005 Built for Sale
Fast Supply Vessel for Sale


Description :

General
Hull : 44
Vessel Type : Fast Supply Vessel
Year Built : 2005

Dimensions
Dimensions : 160 ft. X 30 ft. X 12.8 ft. (48.77 m X 9.14 m X3.9 m)
Clear Deck : 98 ft. x 26 ft. (29.87 m x 7.92 m)
Cargo Deck Area : 2,548 sq. ft. (236.72 m2)
Deck Cargo Capacity : 285 LT (289.57 MT)
Deadweight Tonnage : 336 LT (341.39 MT)

Capacities
Fuel Oil : 23,655 gals. (89.54 m3)
Ballast : 36,510 gals. (138.21 m3)
Potable Water : 900 gals. (3.41 m3)

Pumps with Discharge Rates
Fuel Oil : 240 GPM @ 140 ft.

Machinery
Main Engines : Four (4) CAT 3512B HD, 6,700 BHP
Bow Thrusters : Two (2) 250 HP Thrustmaster Tunnel
Speed : 26 knots
Generators : Two (2) x 80 kW

Special Features
Positioning : DP Upgradeable
Stern Controls :
Firefighting : One (1) Monitor @ 1,200 GPM

Life Saving Equipment
Life Rafts : Four (4) x 25-Man Inflatable Life Rafts
Ring Buoys : 3
Other gear as required by authorities

Electronics
Electronics Package :
Two (2) JRC JMA 2344 Radars, JRC A3GMDSS HF/MF,
Two (2) Furuno FM880SDSC VHFs, Marine Technologies
Bridge MateX-Pack DS IMO, Furuno DS-80 Dual Axis
DSAIS, Furuno FE700 IMO Sounder, Furuno FS-1503
SSB Radio, Standard Horizon LH-5Hailer, Two (2) Icom
IC-M302 VHFs, Three (3)Icom GM1600 Handheld
Emergency VHFs,Two (2) ACR SARTs, ACR 2774 EPIRB,
JRCNCR330 Navtex

Classification
ABS : High Speed Crewboat
ABS : Loadline
USCG : Certified

Accommodations
Accommodations : 10
Passengers : 77

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
160 ft Fast Supply Vessel for Sale
Used Fast Supply Vessel for Sale
Fast Supply Vessel - 2005 Built - For Sale
ABS Class Fast Supply Vessel for Sale
Used 2005 Built Fast Supply Vessel for Sale

--------------------------------------------------------------------------------------------------------
IRI 1100Hp Trailer Mounted Telescopic Drilling Rig for Sale
Worldoils Marketplace
IRI 1100Hp Trailer Mounted Telescopic Drilling Rig for Sale

Worldrigs ID: WR2609

IRI 1100Hp Trailer Mounted Telescopic Drilling Rig for Sale
Trailer Mounted Telescopic Mast Triple Drilling Rig - 2001 Built


Description :

General Description :
Make : IRI                                                      
Year Built / Rebuilt : 2001                                
Estimated Drilling Depth : 13,000 ft                     
Estimated Rig Move loads : 39                  
Estimated Camp Move Loads : 4               
Rated HP : 1100                                             

Mast :
Height : 142.00 ft                                                    
Static Hook Load Capacity : 500,000lbs                     
Mast Racking Capacity : 14,000 ft                         

Substructure :
Style : Telescoping                                                       
Height : 25.00 ft                                                      
Clear Height : 22.50 ft                                            
Casing Capacity : 500,000lbs                                    
Maximum Setback Load : 300,00lbs                        

Drawworks :
Make : Nov                                                       
Model : 2550                                                        
Power Rating : 1100 hp                                            
Input Power : 1 ea Joliet C75Z-0401                                               
Brake Type : Band                                                 
Drilling Line Size : 1 1/8"                                        
Auxillary Brake : Bayor 5052 W                                           
                                                                   
Top Drive / Power Swivel :
Make : Tesco                                                         
Model : 350 EXI 600                                                         
Capacity : 350 Ton                                                     
Torque - Continuous : 30,000 ft lb @90 RPM                                 
                                                                     
Swivel:
Make : Nov                                                          
Model : P - 300                                                        
Capacity : 300 Ton

Rotary Table :
Make : Ideco LR-275-K
Table Opening : 27 ½"
Maximum Load Rating : 250 Ton                                                     

Power Generation :
Engines : 3 ea Caterpillar D 3512                                               
Generators : 3 ea Caterpillar SR4                                   
SCR / VFD / DC / DC : SCR RIG                             

Mud System :
Mud pumps : 2 ea 10-P-130                                             
Power Rating : 1,300 hp @ 140 rpm                                            
Pressure Rating : 5,000 psi                                        
Active Mud Volume : 1000 bbls     
Reserve Mud Volume : 1150 bbls                           
Shale Shakers : 4 ea Brandt King Cobra                 
Mud Cleaner : N / A                                             
Desander : Brandt 10" × 3 Cones 
Desilter : Brandt 4" × 20 Cones                                              
Centrifuge : N / A                                                 

Well Control :
Annular : 13 5/8" 5,000 psi Hydril, Type GK                                      
Single Ram Preventer : 13 5/8" 5,000 psi Wood Group Type U                                           
Choke Manifold : Wood group 3 1/8" 5,000 psi                                        
BOP Closing Unit : Wood Group 5 Station 3,000 psi                                     
                                                                  
Enhancements :
Forklift : Caterpillar It 38 F 

Location : Chad

Price & terms : Please enquire using the email form below

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------------
Search words (for official use only) :     
1100Hp Trailer Mounted Drilling Rig for Sale
2001 Built Trailer Mounted Drilling Rig for Sale
IRI 1100Hp Trailer Mounted Triple Drilling Rig for sale
Trailer Mounted Telescopic Mast Rig for Sale
Trailer Mounted Land Drilling Rig for Sale

-----------------------------------------------------------------------------------------                                            
 
Coiled Tubing Unit 2012 built - for Sale
Worldoils Marketplace
Coiled Tubing Unit 2012 built - for Sale

Worldrigs ID: WR1375

Coil Tubing Unit for Sale
2012 built Coiled Tubing unit for sale
Used Coiled Tubing Rig

Description
This CT unit manufactured in 2012 is built upon a 2007 Kenworth t800b tandem/tri-Drive 
tractor with a 127,038 km/ 8,184 engine hours. The unit features a fuller 18 speed 
transmission with a driver controlled locking differential.

The unit comes complete with 560 CFM Hurricane compressor, 18t picker crane, 
Sunstran hydraulic system, 400 l water tank, stainless steel methanol tank, 5k
methanol/soap tank, and 5k iron reel and stripping head. This unit is currently 
equipped for 1 3/4” (44.45mm) tubing.

Injector is a 2007 Celtic model with 40,000 lb push/pull capacity able to handle 
1.25/1.50/1.75 tubing.

Reel Capacity :
1 ¼” (31.75 mm) – 4,200 meters
1 ½” (38.1 mm) – 3,500 meters
1 ¾” (44.45 mm) – 3,000 meters

This unit comes with the following auxiliary equipment :
Qty 1 – BOP – 3 1/8” x 3k lee specialties
Qty 2 – 3” x 5k lubricator joint x 4 ft w/ bowen style unions
Qty 2 – 3” x 5k lubricator joint  x 6 ft w/ bowen style unions
Qty 1 – 3” x 5k lubricator joint  x 8 ft w/ bowen style unions
Qty 1 – BOP trailer – tandem 6000 lb axles
Qty 2 – fluid catch tank – 10 cu w/ degasser, 2” x 2K line pipe
Qty 3800m – 1 1/4” X 0.109 tubing
2006 Ford f-450 crew truck (303,940km, 4×4 dual wheel, 3T picker crane, BOP deck)

*This unit is currently in operation in Canada.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

--------------------------------------------------------------------------------------------------------------------------
Search words :
Coil Tubing Unit for Sale
Used Coiled Tubing Rigs
Coiled Tubing Units - 2012 built
2012 Built Used CT Rigs
Coiled Tubing Rig

---------------------------------------------------------------------------------------------------------------------------

 
2004 Built Ingersoll-Rand T4BH (Blast Hole) Drill Rig
Worldoils Marketplace
2004 Built Ingersoll-Rand T4BH (Blast Hole) Drill Rig

Worldrigs ID: WR217

Ingersoll-Rand T4BH (Blast Hole) Drilling Rig - For Sale
2004 Built Ingersoll-Rand T4BH (Blast Hole) Drill Rig


Model : T4BH Drill Rig
Manufacturer : Ingersoll-Rand
Year : 2004
Condition : Used

Description :

2004 Ingersoll-Rand T4BH (Blast Hole) Drill Rig - S/N: 7851
IR HR2 900 cfm / 350 psi Air Compressor
Cummins QSX15 Diesel Deck Engine
2 - Motor Spur Gear Power Head (Rebuilt)
5 Rod Carousel
2 - Cylinder Bean Water Injection Pump
Hammer Oiler
Drillers Cab
Hydraulic Leveling Jacks
Mounted on a CCC (Crane Carrier Company) - VIN#: 1CYDCE4854T046335
CAT C-10 Diesel Engine - S/N: MBJ04202
Note: Can be converted to T4W and set up for water well drilling at an extra cost
13,395 Frame hours

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Drilling Rig -  Ingersoll-Rand T4BH (Blast Hole) - For Sale
Used Drilling Rig -  Ingersoll-Rand T4BH (Blast Hole)
Ingersoll-Rand T4BH (Blast Hole) Drilling Rig - 2004 Built for Sale
Used Ingersoll-Rand T4BH (Blast Hole) Drill Rig for Sale
Ingersoll-Rand T4BH (Blast Hole) Drill Rig for Sale in USA

-------------------------------------------------------------------------------------------------------
Ingersoll-Rand RD20 Range III Drill Rig
Worldoils Marketplace
Ingersoll-Rand RD20 Range III Drill Rig

Worldrigs ID: WR696

Ingersoll-Rand RD20 Range III Drill Rig for Sale
Used Ingersoll Rand RD20 Range III Drill Rig - for Sale

Model : RD20 III Drill Rig
Manufacturer : Ingersoll-Rand
Year : 2002
Condition : Used

Description :

2002 Ingersoll-Rand RD20 Range III Drill Rig - S/N: 6609
IR HR2.5 - 1250 cfm / 350 psi Air Compressor
Cummins QSK19C Diesel Deck Engine
Cat 2520 water injection pump
Hammer Lubricator
Floating Sub
Cat Walks
Hydraulic Leveling Jacks
Mounted on a CCC (Crane Carrier Company) Truck with 4 Axles
Cummins M11 Diesel Engine
VIN#: 1CYDCM4811T045124

Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------------------
Search words(for official use only) :
Ingersoll-Rand RD20 Range III Drill Rig - 2002 Built - for Sale
Used Ingersoll-Rand RD20 Range III Drill Rig
Ingersoll Rand Land Drilling Rig for Sale
Ingersoll-Rand RD20 Range III Drill Rig for Sale in USA
2002 Built Ingersoll-Rand RD20 Range III Drill Rig

--------------------------------------------------------------------------------------------------------------------

 

 
4500hp ASD Tugboat for sale
Worldoils Marketplace
4500hp ASD Tugboat for sale

Worldrigs ID: WR419

ASD Tug For Sale
4500hp ASD Tugboat For Sale

Principle dimensions
L x B x D x d : 38 x 10 x 4.5 x 3.4m
Speed (sea trial, 100% MCR) : About 13.5 knots
Bollard Pull : About 56 tons
Complements : 10 persons
Navigating area : Coasting area
Class : KR
F.O.tank : 120 cubic meter
F.W.T : 25 cubic meter

Main engine & propeller :
Niigata 6L28HX, 2,250ps x 750rpm x 2 sets Z-peller x 2 sets (Niigata, ZP-31).

Deck machinery :
electo-hydraulic type
Windlass & towing winch : 3.0ton x 12m/min x 2 sets
Towing winch : 15ton x 12m/min x 1 set
Rope reel : 2.0ton x 40m/min x 1 set

Lifesaving equipment :
Life raft (10p) x 2 sets

Fire fighting equipments :
Portable fire-extinguisher in E/R. accommodation

Air condition :
Package type air condition

Aux.generators :
168kw x 225v x 60hz x 1,800rpm x 2 sets, 80kw x 1,800rpm x 1

Aux. machinery :
Air compressor x 2, oil bilge separator x 1, F.O.purifier x 1, L.O.purifier x 1, 
sewage treatment x 1,

Navigation equipment :
Anemometer x 1, radar 10kw x 1, aux.radar 4kw x 1.
Air horn x 1, magnetic compass x 1, satellite compass x 1, GPS x 1,
echo sounder x 1, speed log x 1, AIS x 1, weather fax. x 1, inmarsat C x 1.
MF/HF radio(250w) x 1, VHF(25w) x 1, two way radio telephone x 2,
EPIRB x 1, radar transponder x 1

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

--------------------------------------------------------------------
Search words(for official use only) :
ASD Tug 4500hp For Sale
ASD Tug For Sale in Asia
4500hp ASD Tugboat for sale
ASD Tugs For sale
ASD Tugboat for sale in Singapore

---------------------------------------------------------------------

 
Drilling Rig - Schramm RC685 - 2011 Built
Worldoils Marketplace
Drilling Rig - Schramm RC685 - 2011 Built

Worldrigs ID: WR994

Schramm RC685 Exploration Drilling Rig for Sale
Drilling Rig - Schramm RC685 - 2011 Built


Model : RC685 Exploration Drill Rig
Manufacturer : Schramm
Year : 2011
Condition : Used

Description :

2011 Schramm RC685 Exploration Drill Rig
MTU V2000 Diesel Deck Engine
Sullair 1350 cfm / 500 psi Air Compressor
Hours : 12,317
Miles : 7,129
Boart Longyear Rod Handler
Hydraulic Pumps
Collector Box & Cyclone
Drill Table Opening : 22 inch
Rod Spinner & hydraulic breakout wrenches
Rated Depth Capacity : 5-1/2" diameter hole to 2,300 feet deep
Rated Pullback : 94,000 lbs
CAT Walk
Hydraulic Leveling Jacks
Mounted on a 2012 International Truck
MaxxForce Diesel Engine
Misc Drill Tooling for an extra cost (in pictures) Stablizer,
Hole Opener, Collar, Land Plates

Note: Set up for RC (Reverse Circulation) minerial exploration & mining.
This is not a T685 model for water wells

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
2011 Built Schramm RC685 Exploration Drilling Rig for Sale
Used Schramm RC685 Exploration Drilling Rig for Sale
Schramm RC685 Exploration Drilling Rig - 2011 Built for Sale
Schramm Exploration Drilling Rig for Sale in USA
Schramm RC685 Used Exploration Drilling Rig for Sale in USA

-------------------------------------------------------------------------------------------------------
Tugboat - 2002 Built - for Sale
Worldoils Marketplace
Tugboat - 2002 Built - for Sale

Worldrigs ID: WR2043

Tugboat - 2002 Built - for Sale
Used Tugboat for Sale in Asia

Description :

Year Built : 2002
Gross Tonnage : 246 M.T.
Designed Bollard Pull : 42.0 Tons (ahead) 38.0 Tons (stern)
Dimension (L X B X D m) : 27.90 x 9.0 x 4.7
 Main Engine : 2 x 1600 BHP Yanmar 8N21A-EN @ 880 RPM
Class : Lloyds
Sister Ship Available : Y
Available : 4Q/15

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

--------------------------------------------------------------------------------------------------------
Search words (for official use only) -
Tugboat for Sale in Singapore
2002 Built Used Tugboat for Sale
27.90m Tugboat for Sale
Used Tugboat 2002 Built for Sale in Asia

-------------------------------------------------------------------------------------------------------

 
Watercraft for Charter
Worldoils Marketplace
Watercraft for Charter

Worldrigs ID: WR1087

LCM 2000 Watercraft for Charter
Unused LCT For Charter in Australia
Unused LCM 2000 Watercraft
Almost new Watercraft for Hire
Unused Military Landing Craft For Charter

General
Class : +1A1 LC R1 (50,150,150) (Aus) Naval Support Crew EO

Principal particulars :
Hull :
Length overall : 25.40 metres
Length DWL : 23.14 metres
Beam : 7.60 metres
Draft (loaded) : 1.00 metres
Displacement light : 62 Tonnes

Displacement heavy : 135 Tonnes max
Payload : 65 Tonnes max
Stern ramp clear width : 4.55 metres
Bow ramp clear width : 5.50 metres
(Approx deck area) (Including ramp) : 137 square metres

Machinery :
Propulsion engine : Detroit 6062(HK10;HK11)
Propulsion Shaft : Gewes cardan shaft 4546-80/03x1350-1.5
Gearbox : ZF marine 2000 series 3100-001-023
Waterjet propulsors : Doen DJ260

Bulkhead seal : Wartsila H73827C-04
Propulsion control system : Twin disc power commander EC200 WJ
Power generation Jacobs radio : JPS14 2400W
Ship Service Power Generator EPSA Pty Ltd : Caterpillar 3054DINA

Description of Craft Role
The water crafts are designed to provide a transfer facility from the LPA (Landing Platform Amphibious), they have two roles as such which are

Primary Role
The primary role of the LPA Watercraft System is to provide the LPAs with the ability to transfer vehicles, equipment, stores and personnel from ship to shore and return.

Secondary Role
The secondary role of the LPA Watercraft System is to support tactical mobility of land forces and sustainment of forces ashore independent of the LPA.

Operational Conditions are as follows :
Speed
Full Load - No Cargo : 11 Knots
Full Load - Maximum Cargo : 9.5 Knots
Range : 720 nm
Endurance : 6 days
Sea State Limits
Coastal Passage : Sea State 4
Secured to LPA : Sea State 8
Marriage with LPA bow and stern ramp : Sea State 2
Beaching Operations up to : 1.5 metres surf

Navigation system 
Echo sounder : Furuno FCV581L
Auto pilot coursemaster : CM 650AC
Radar : Furuno 1942 Mk2
GPS : Rockwell Australia VPLGR II
Electronic chart : Endeavour 5 navigator
Satellite compass : Furuno SC-50
Magnetic compass : Suunto Suunto 135

Communications system
External :
HF Radio : Furuno FS 1570
VHF Radio/DSC : Furuno FM8500
Whistle : Marco 05723
Signalling lamp : Francis FSP127
EPIRB : Jotron Tron 40S
SART : Jotron X-96960

Internal :
Fixed Inter comm. : Phontech 3100
Wireless Inter comm. : Motorola GP328

Machinery space ventilation :
Machinery space fans : Fantech APC R0404 AP10/37
Waterjet room fan : Woods 7.5J
Fuel tank space fan : Woods 6J

Accommodation
Given the moderate range and endurance of the vessel the facilities
provided for the crew are basic, but adequate for the needs.
It should be noted that all the craft exhibit an extremely high
standard of crew accommodation.
Cabin accommodation for the four crew consists of two double tier
bunks with a locker facility dividing. Combination fridge /freezer provide
food storage for the limited duration voyages. All vessels were found to
be inn exceptionally clean condition.

Engine room & machinery spaces :
The engine rooms are very well fitted out.

Main engines 2x Detroit series 60  : Rated at 440kW
Generally the running hours are very low in the service operation of these
engines, they do however vary between the craft in that some have
had very little time at sea- less than 300 hours.

Main engine :
Auxiliary engines :
Auxiliary engines 2 x Caterpillar 3054 : Rated @ 35kW
Similarly the auxiliary engines have very low running hours and would be
considered to be in good condition.
The engine rooms were all found to be in very good condition.
The electrical lay out and reticulation of wiring was of a very high order, the
switchboard below illustrating the compactness of the fully EO Class designation.

Price & terms : Please enquire using the email form below

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------------
Search words (for official use only) :
LCM 2000 Watercraft for Charter
LCT in Australia For Charter
Almost new Watercraft for Hire
Unused LCM 2000 Watercraft
Military Landing Craft For Charter/Sale
Unused Watercraft - LCM 2000 - For Hire
LCM 2000 in Australia for Charter
-------------------------------------------------------------------------

 
Backyard Equipment for Sale
Worldoils Marketplace
Backyard Equipment for Sale

Worldrigs ID: WR2524

Backyard Equipment Package for Sale
Telescoping Substructure & Accessories - For Sale
BOP for Sale
Mud Pump for Sale

Section 1 - Substructure & Accesssories
1.1 Telescoping Substructure API 4F 4th Edition
 Rotary capacity : 425,000 lbs
- Setback capacity : 300,000 lbs
- Height : 16’
- Certified plaque engraved with A.P.I monogram 4F 4th Edition, PSL 1, E2/U2
- Four hydraulic rams to raise and lower sub structure
- Two hydraulic rams to raise and lower side floor wings
- Hydraulic controls six valve bank with flow divider
- Install two snub posts in between main hole and mouse hole
- Install BOP handling system for 11” x 5000 PSI stack

1.2 Rotary Table
- Supply and install one 17 1/2”Hecker or American Block rotary table
- Rotary Table c/w split Master bushing and insert bowl.
- Supply and install rotary torque system

1.3 Chain Case for Rotary

- Supply and install drop down chain case from rotary

1.4 Electrical

- Supply and install (three) four foot explosion proof fluorescent lights in cellar area

1.5 T Sill
- Fabricate and supply 40’ t sill with all lugs to support the free standing mast

1.6 Ramp

- Fabricate and supply ramp with 4” welded pump line running down the side

1.7 Paint
- Substructure has been painted gray

Section 2 - Catwalk / V-Door
2.1 Catwalk / V-Door
- Supply 45ft. catwalk with fold up v-door with pipe cut out

Section 3 - Overhead Equipment

3.1 Block/Hook
- Supply 160 ton TSM block / hook combination
- Four each 30” sheaves for 1” drill line

3.2 Swivel

- Supply 150 TON TSM Rotary Swivel
- Swivel c/w Kelly spinner stand
- Quill sub 4 ½” Reg. left hand thread – 6 5/8” Reg. Left

Section 4 - Mud Pump
4.1 Diesel Engine
- Supply (1) one Caterpillar C‐15 series engines rated at 540 HP

4.2 Pump Drive

- Supply and install one Allison OFS 4700 Transmission

4.3 Pump #1

- Supply one new Gardner Denver PZ‐7 mud pump

4.4 Mud Pumps Skid & Accessories

- Total building dimensions to be 37’ long 12’ wide
- Supply one oilfield skid 40’ X 12’ using 4 beam 12”@50 lb
- Install ¾”x 7” strapping on bottom of skid runners
- Cross members 10” @ 33 LB flooring to be 3/16” checker plate
- Supply and install pump with 4” valve, 2” pop valve, 2” bleeder valve and type D
mud gauge
- Supply one precharge pumps 60 hp 6 X 5 X 11 with suction screens
- Fabricate all precharge and suction lines from mud tank
- Fabricate all high pressure lines on skids. Pressure test chart and x‐ray done on all
high pressure lines
- Supply 5000 PSI shock hose in between pump and ramp with integral ends
- Supply one liner wash pump and liner wash tank with plumbing
- Supply one K20 dampener and cross
- Supply and install one diesel day tank with hosing for circulating system

4.5 Electrical
- Supply and install (4) four foot fluorescents in each building
- Supply and install one distribution panel

4.6 Paint

- Mud Pump skid has been painted avocado green

Section 5 - Mud Tank

5.1 Mud Tank Specifications
- Total tank dimensions to be 50’ long 12’ wide
- One oilfield skids 53’ X 7’10” using three beam 12” @ 50 lb.
- Cross members 10” @ 33 lb with 1/4” formed plate flooring
- Walls on tank corrugated 1/4” plate tank perimeter tbg frame
- Fabricate 11 gauge building over top of mixing hopper and pumps
- Fabricate and install hopper door access on side of mix building
- Supply and install exhaust fan
- Fabricate and install two doors on front of mud mix building
- All unions for piping on tanks will be hammer style
- All suction lines will have bridge gate valves and be sumped
- Supply and install 30” poor boy degasser
- Suction lines inside tank 10” for pump and 6” for mixing
- One 4” mud roll line with 2” mud guns
- One 6” hopper lines with buttery fly valves
- One discharge manifold for both pumps

5.2 Tank Capacities
- Pill tank 30 bbls.
- Suction tank 120 bbls.
- Settling tank 105 bbls.
- Settling tank 110 bbls
- Shaker tank 100 bbls.
- Sand trap 10 bbls
- Trip tank 25 bbls.

5.3 Equipment

- One DFTS mud conditioner
- Mud cleaner consist of 16 cone Desilter and 2 cone Desander
- Three MA – 10 hp 380 volt RG mud agitators
- Supply and install five jet guns
- Supply and install single hopper mixing system  
- One 8” X 6” X 14” 60 HP 460 volt overhead motor driven by belts for Mixing pump 
- Two 6” x 5” x 11” 50 HP 380 volt overhead motor driven by belts (Desilter & Desander pumps)
- One explosion proof 10 HP trip tank pump

5.4 Electrical
- Supply and install four fluorescent lighting on telescoping posts
- Supply and install all electrical hard wiring and jumper cords
- Supply and install distribution panel at mixing end of tank
- Supply remote switch for trip tank pump to driller’s panel

5.5 Paint

- Mud tank skid has been painted avocado green

Section 6 - Generators / Combination Building

6.1 Diesel Engine
- Supply Two Caterpillar C‐15 engine rated at 540 HP

6.2 Generators
- Supply Caterpillar generator prime power is (50Hz) 355 kW

6.3 Electrical

- Supply one transfer switch 600 amps
- Supply one 380 Volt panels with pin and sleeve plugs
- Supply one 380/222 panel with pin and sleeve plugs with 100 amp outlet for lease
accommodation shacks
- Supply and install plug box on building for cord ends
- Supply spare starters and plug in for 60 HP and 30 HP
- Supply and install four foot fluorescents inside building
- Supply and install two sodium vapour lights on roof
- Supply all extension cords from gen building to outside support buildings

6.4 Building
- Fabricate triple beam skid 48’ long x 16’‐6” wide from 12” beam
- Install 6” roll ends and cover entire skid with 3/16” checker plate
- Shear, form and stand building 45’ long x 12’‐6” wide x 8’6” high
- Install tubing roof perimeter and sloped roof panels
- Install (3) divider walls inside building for (3) separate rooms
- Supply and install steel doors/frames into each room
- Fabricate 2 ft. wide cable tray on top of combination building
- Install 6x4 bumper posts on both ends of skid

6.5 Lightplant Room

- Lightplant room is 12’ wide x 20” long
- Supply and install (2) two Caterpillar C‐15 – 355 kW, 380V, 3 phase diesel
generators
- Fabricate and install 140 gallon fuel tank in corner of room
- Supply and install Sullivan Palatek 30 hp rotary screw air compressor with 120
gallon tank
- Install hinged door on side of building for electrical cabling access.

6.6 Accumulator Room
- Accumulator room is 12’ 6” long x 12’ wide and 8’ 6”
- Supply and install 4 station 120 gallon Control Technology Accumulator
- 10 each 11 gallon accumulator bottles
- One T‐25 Weatherford triplex charge pump
- Two 8 ½”, 40:1 air pumps

6.7 Paint
- Combination building has been painted gray

Section 7 - Well Control
7.1 Choke Manifold
- Oilfield skid dimensions to be 10’ long 6’ wide.
- Supply one single gut 2” X 3” choke manifold c/w manual choke

7.2 Blowout Preventors
- Supply one 11” 5000 PSI new Cameron Townsend T‐84 double ram preventer with
one set 3 ½” rams and one set of blind rams

7.3 Annular

- Supply one 11” 3000 PSI new Cameron (Townsend) T‐90 Annular

7.4 BOP Accessories

- Supply one 3 1/8” SS flanged 30’ 5000 PSI choke hose
- Supply one adapter spool 11” x 5,000 psi – 11” x 3,000 psi
- Supply one 11” 5000 PSI drilling spool with 3 1/8” outlets
- Supply one 3 1/8” 5000 PSI HCR gate valve (hydraulic)
- Supply and install 3 1/8” 5000 PSI manual gate valve
- Supply two 2 1/16” 5000 PSI manual gate valve
- Supply one 2 1 /16” 5000 PSI check valve
- Supply one DSA 2 1/16” X 3 1/8”
- Supply all studs and ring gaskets

Section 8 - Casing Stabbing Board

8.1 Casing Stabbing Board
- Air operated casing stabbing board

Section 9 - Water/Fuel/Change House Skid

9.1 Water Tank
- Supply 100 barrel skid mounted water tank
- Supply and install two 4 x 3 Centrifugal transfer pumps
- Supply and install discharge and suction manifolds
- Tank will be built from ¼” plate
- Tank access hatch and drain plug

9.2 Fuel Tank
- Supply skid mounted fuel tank 100 barrels
- Supply and install two 3/4 hp 110v fuel pumps 1 ¼” X 1”
- Supply and install discharge and suction manifolds
- Supply one fuel water and solids separator
- Tank will be built from 1/4” plate
- Tank access hatch, drain plug and sight glass

9.3 Change House

- Change room is 12’ wide x 12’ 6” long
- Fabricate and install fold down lunch table
- Supply and install padded bench
- Supply and install 12 change lockers

Section 10 - Kelly Bar & Bushings
10.1 Kelly Bar & Kelly Drive Bushings
- 4 ¼” Hex Kelly 37’ overall c/w shipping scabbard.
- Square Drive Bushing for 4 ¼” Hex Kelly & 17 ½” rotary table

Price & terms : Please enquire using the email form below.       

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
BOP Accessories for sale
Mud Pump Skid & Accessories - For Sale
Substructure & Accessories for Sale
Generators for Sale

----------------------------------------------------------------------------------------------------------
Quik-Drill 275 DSI - Drilling Rig for Sale
Worldoils Marketplace
Quik-Drill 275 DSI - Drilling Rig for Sale

Worldrigs ID: WR838

Speedstar 275 DSI Quik-Drill Rig for Sale
Quik-Drill 275 DSI Rig for Sale
Used Drilling Rig for sale
Drilling Rig - Quik-Drill 275 DSI
- 1989 Built

Model : 275 DSI Quik-Drill Rig
Manufacturer : Speedstar
Year : 1989
Condition : Used

Description : 

1989 Speedstar DSI Quik-Drill Rig,
(Armstrong Machine Re-manned) Gardner Denver 5x6 Mud Pump,
Ingersol-Rand 175 cfm / 150 psi Air Compressor,
300' ft Of Drill Pipe (Mayhew Jr.) & basic tooling included,
Newer Drive Pumps & Top Head Motor installed in mid-2013,
Mounted on a 1983 International S-2800 Truck 4x4
Diesel Engine
Air Brakes
Located : USA

Price & terms : Please enquire using the email form below.      

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

Water Well Rigs

------------------------------------------------------------------------------------------------------
Search words(for official use only) :
Speedstar 275 DSI Quik-Drill Rig for Sale
Quik-Drill 275 DSI
Rig for Sale
Drilling Rig - Quik-Drill 275 DSI - For Sale

1989 Built Drilling Rig for sale
Speedstar Land Drilling Rig For Sale
Used Drilling Rig - 1989 built
Quik-Drill 275 DSI
Used Speedstar 275 DSI Drilling Rig for Sale
------------------------------------------------------------------------------------------------------

 
Nordic Drill DRC-10-A Crawler Drill Rig
Worldoils Marketplace
Nordic Drill DRC-10-A Crawler Drill Rig

Worldrigs ID: WR778

Nordic Drill DRC-10-A Crawler Drill Rig for Sale
2015 Built Nordic Drill DRC-10-A Crawler Drill Rig for Sale

Model : DRC-10-A Crawler Drill Rig
Manufacturer : Nordic Drill
Year : 2015
Condition : New

Description :

2015 Nordic Drill DRC-10-A Crawler Drill Rig

All in One Drilling Rig with Dual Rotary, Crawler Mounted Carrier,
12" Max Openings & Slide Angle Mast with Advantages 
Compared to a Conventional Air Rotary Drill: 

Angle Slide Package: Allows Drilling Applications for Mining, 
RC (Reverse Circulation) Exploration, Anchors, Pilling, Geotechnical, 
Soil Samples, Etc.

Crawler: Light Weight & Small means less damage to the drilling sites, 
allows set up on difficult terrains & access sites, and less preparation 
for set up and break down.

Dual Rotary: Allows Accuracy & Performance in Tough Overburden Conditions,
Good Sampling & Screen Intallations, Facilitates The Extraction of Casing,
Easy to Operate & Cleaninesss on Sites.

Safety:
Offers Safe Drilling Methods, Provided of an Anti-Rotation System.

Top Drive:
- Stroke: 16' ft
- Hoist: 31,000 lbs
- Hoist Speed: 53 ft/min
- Pull Down: 23,500 lbs
- Pull Down Speed: 71 ft/min
- Torque: 6,000 ft x lbs
- Rotation Speed: 0-90 RPM

Lower Drive:
- Stroke: 10' ft
- Hoist: 35,000 lbs
- Hoist Speed: 47 ft/min
- Pull Down: 26,500
- Pull Down Speed: 63 ft/min
- Torque: 21500 ft x lbs
- Rotation Speed: 0-9 RPM
- Maximum Opening: 12"

Engine: CAT C 6.6 Diesel @ 210 hp
Sliding Mast Stroke: 36"
Welding machine: Hydraulic 225 AMP
Water Pump: Quad Bean 18 GPM
Hydrofrac Pump: 26 GPM @ 1800 psi / 13 GPM @ 2900 psi
Service Winch: 2,000 lbs
Front Winch: M12 12,000 lbs
Pipe Tub: 40 Pipes - 3-1/2"
Safety: Anti-Rotation Top Drive
Maxumum Speed: 3,1 MPH
Weight: approx. 37,400 lbs

Manufactured in Canada

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Nordic Drill DRC-10-A Crawler Drill Rig for Sale
2015 Built
Nordic Drill DRC-10-A Crawler Drill Rig for Sale
New Drilling Rig -
Nordic Drill
Crawler Drill Rig for Sale - 2015 Built
New
Nordic Drill DRC-10-A Crawler Drill Rig
---------------------------------------------------------------------------------------------------------

 
Gardner Denver DW 500 Drilling Rig
Worldoils Marketplace
Gardner Denver DW 500 Drilling Rig

Worldrigs ID: WR1971

Gardner Denver DW 500 Drilling Rig for Sale
900 HP Used Mechanical Drilling Rig


Description:

Gardner Denver DW 500 Drilling Rig
Used Mechanical Drilling Rig, 11,000’ Drilling Capacity, 900 HP
Country: USA

Drawworks :
Gardner - Denver model DW - 500 drawworks.
Main drum grooved for 1 - 1/8" drill line and
powered by two (2) Caterpillar model C - 15
industrial engines.

Auxiliary brake : Parmac type V - 80 Hydromatic brake.

Mast :
Superior derrick services 136' - 0" clear height,
18' - 6" base, 600,000 lb. GNC 428,000 lb.
Static hook load mast with crown cluster consisting
of six (6) 42" Dia. sheaves and one (1) 55" dia.
Fastline sheave, all grooved for 1 - 1/8" wireline.

Substructure :
15 foot. box - on - box conventional substructure
with 450000 lb rotary capacity, 300,000 lb set back
capacity and 750,000 lb simultaneous rotary and
setback load.

Travelling equipment :
EMSCO 250 ton unitized hook/block combination.
Complete with five (5) 36" dia. sheaves.
King oil tools model 25MB - 14, 300 ton capacity swivel.

Rotary table :
Gardner - Denver model RT20 - 1/2" rotary table
chain driven off the drawworks rotary countershaft and
complete with Varco "MSPC" sold body pin drive
master bushing and type "20 - HDP" pin drive
Kelley bushing for 5 - 1/4" API hexagonal Kelly.

Well control equipment :
One 5 station Koomey type 80 BOP control unit
One (1) 2" x 4", 5,000 PSI WP choke manifold.
One (1) 36" OD atmospheric degasser.
United on a single Oilfield type skid.

Mud pumps :
Two (2) model F - 1000 Triplex mud pumps.
Powered by a Caterpillar model D399TA diesel engines.
Suctions charged by a 6" x 5", series 178 centrifugal pumps
and a Emsco style discharge pulsation dampeners.

Mud systems :
Tow (2) tank mud system of approximately 800 BBL
total capacity.
Shaker tank of approximately 400 BBLS with two (2)
6" x 5" series 250 centrifugal pumps powered by a
75 hp AC electric motor. One (1) derrick 12 cone
desilter, one (1) derrick 2 cone desander, one (1) derrick
vacuflo 500 degasser, one (1) O'Drill/MCM 15 hp
horizontal mud agitator. Two (2) vortex orbital 3000
shale shakers.
Suction tank of approximately 400 BBLS with two (2)
6" x 5" series 250 centrifugal pumps powered by a
75 hp AC electric motor. Four (4) O'Drill/MCM 15 hp
horizontal mud agitators. O'Drill 6" mud mixing
hopper complete with venturi.

Water tank :
One (1) 470 BBL capacity water tank complete
with two (2) 3" x 2" series 250 centrifugal
water pumps powered by a 20 hp AC electric motors.

Electrical system :
Two (2) 350 kW generators powered by two (2)
Caterpillar model C - 15 diesel engines. Complete
with switchgear and transdormers.

Auxilliary equipment :
One (1) retreiver wireline measuring unit complete
with 15,000 Ft. of 0.092" wireline.
One (1) air powered chain driven drill line spooler.

Compressed air system :
One (1) Quincey model "QSB - 40" air cooled
rotary screw packaged air compressor unit
delivering 165 CFM at 125 PSI and powered
by a 40 hp AC electric motor and
complete with modulation controls.
Complete with a 200 Ga. air receiver.
One (1) Quincey model "QR390 - 20" unitized
base mounted air compresor delivering 70 CFM
at 125 PSI and powered by a 20hp AC electric motor.
One (1) 500 Ga. air receiver mounted in the
substructure.

Rig site structures :
One (1) drill floor house at driller's position
One (1) crew change house parts house
One (1) fuel tank.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Gardner Denver DW 500 Drilling Rig for Sale
Used Mechanical Drilling Rig for Sale
900 HP Gardner Denver DW 500 Drilling Rig
Gardner Denver Mechanical Drilling Rig for Sale
Used Mechanical Drilling Rig - Gardner Denver
---------------------------------------------------------------------------------------------------------------

Cameron 18 3/4
Worldoils Marketplace
Cameron 18 3/4

Worldrigs ID: WR2123

Cameron 18 3/4" 15K BOP for sale
Cameron 18 3/4" 15K BOP, 1 x double, 2 x single, 8 Bonnets


Description
All flanged and in ticket to 2018

Measurements

Dimensions :
1) 1.4 x 1.55 x 2.15H, 2-3) 1.4 x 1.4 x 1.9H, 4-12)1.4 x 1.9 x .8 H

Weight :
1)17, 2&3)12 each, 4-12)4 each

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


 ---------------------------------------------------------------------------------------------
Search words(for official use only) :
Cameron 18 3/4" 15K BOP for sale
Cameron 18 3/4" 15K BOP, 1 x double, 2 x single, 8 Bonnets
BOP Equipment for Sale
Used Cameron 18 3/4" 15K BOP - for Sale

 --------------------------------------------------------------------------------------------
 
Jackup Drilling Rig For Sale
Worldoils Marketplace
Jackup Drilling Rig For Sale

Worldrigs ID: WR405

Jackup Drilling Rig For Sale
Friede & Goldman L-780 IC Jackup Rig For Sale
Oil & Gas Jackup Drilling Rig For Sale


Jackup Drilling Rig For Sale : Rig 101

Rig Type : Jackup
Rig Design : Friede & Goldman L-780 IC
Year Built : 1980
Class : ABS
Registry : Marshall Islands

Water Depth - Ft : 300
Drilling Depth - Ft : 20,000
Quarters : 72 + 1 bed hospital
Dimensions : 180' x 175' x 25'
Helideck : 62' diameter for Sikorsky S-61

Variable Deckload - Operating : 3,168 kips
Variable Deckload - Transit : 3,168 kips
Number of Legs : 3
Leg Length : 401.5
Usable Leg Below Hull : 362' 4"

Spud Can Diameter : 39' 8
Cantilever Reach : 40'
Transverse Movement : 10' port or starboard of centerline
Max Combined Structure Load : 1,000 kips
Bulk Mud & Cement : 9,370 cu ft

Liquid Mud : 1,800 bbls
Fuel Oil : 2,049 bbls
Drill Water : 5,450 bbls
Potable Water : 1,180 bbls
Sack Storage : 3,000 sacks

Drawworks : Mid-Continent U-1220 EB w/1-3/8" drill line
Derrick : Dreco 30' x 30' x 160', 1,000 kips static hook load
Top Drive : Varco TDS-4S w/PH85 pipe handler
Pipe Handling System : Varco ST-80 Iron Roughneck
Rotary : Oilwell A-375, 37-1/2"
Top of Rotary Table to Bottom of Barge : 51 Ft.

Mud Pumps : (2) Gardner-Denver PZ-11
Main Engines : (3) Caterpillar D-399 (1) Caterpillar 3512
Annular BOP : (1) Shaffer 13-5/8" 5K
Ram BOP : Cameron Type U (single & double) 13-5/8' 10K
Diverter : Hydril MSP 21-1/4"
Solids Control : (3) Derrick 500 Series Flo-Line Cleaners
Cranes : (2) Seatrax Model 6020 with 110 ft Boom

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your requirements
and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed

-------------------------------------------------------------------------
Search words(for officia use only) :
Jackup Rig Friede & Goldman L-780 IC For Sale
Jackup rigs in Indonesia, Vietnam, India
Oil & Gas Jackup Drilling Rig For Sale
Offshore Drilling Rigs For Sale
Used Jackup Rig Sellers
Used jackup Rig Brokers
Offshore Oil Rigs
Used Jackup rigs
Used Offshore Rigs for Sale
Offshore Used Drilling Rigs
Jackup rigs worldwide
Jackup rigs in Middle East
Jackup rigs in Singapore, malaysia, Brunei

-------------------------------------------------------------------------
 
500HP National 5C Workover Rig
Worldoils Marketplace
500HP National 5C Workover Rig

Worldrigs ID: WR2761

National 5C Workover Rig
500HP Workover Rig for sale


General information
Single Drum D500 Drawworks with 1” drill line
104’ x 250,000# Derrick with rods & tubing racking boards
Detroit Diesel Series 60, 500 HP engine
Allison M5610H Transmission with drop box
Traveling Block, Ideco DS110, slotted speed kit design, 3 sheaves, 110 ton

Foundation, steel scissor beam on 3” x 12” timbers
Disc Assist Brake, Model 37.5 mounted at the drum
Tong, Gill Model 500 with back up head
Blowout Preventer,  Townsend Type 81, 7-1/16”x 5000 psi. double stack
Stripper Head, Hall style 1500 psi.

Tubing Slips, Guiberson 60 ton, air operated
Rod Elevators, 5/8” to 1”
Tubing Elevators, 2-3/8” to 2-7/8” EUE
Wash Swivel, King 53GA
Hand tools

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


----------------------------------------------------------------
Search words (for official use only) :
National 5C Workover Rig for Sale
500HP National 5C Workover Rig
Workover Rig for sale
Land Drilling Rig - For Sale
Workover Rig - National 5C - For Sale
500HP Workover Rig for sale

-----------------------------------------------------------------
Speedstar Quickdrill 600 Drilling Rig - 1984 Built - For Sale
Worldoils Marketplace
Speedstar Quickdrill 600 Drilling Rig - 1984 Built - For Sale

Worldrigs ID: WR308

Speedstar Quickdrill 600 Drilling Rig for Sale
Speedstar Quickdrill 600 Drilling Rig - 1984 Built - For Sale


Model : 600 Quickdrill Rig
Manufacturer : Speedstar
Year : 1984
Condition : Used

Description :

1984 Speedstar Quickdrill 600 Drill Rig
Mounted on an International 2574 Truck
Rebuilt - Detroit 8V92 Deisel Engine with Jake brakes
Rebuilt - Eaton Fuller 13 speed transmission with new clutch-throw out bearing
All new coolant-oil hoses, radiator, exhaust from turbo to muffler, drive shafts, &
rear end
Feed-outrigger-jib-rod jaw-tower hydraulic cylinders and hoses all new
Fully rebuilt top head - gears, bearings, seals, hydraulic motors, north Houston
machine under head mud and air swivel all new. New high pressure airline and
fittings from compressor to top head.
10 GPM water injection pump - completely rebuilt
12,000 lb main winch fully rebuilt including all bearings, seals, and hydraulic motor.
Rebuilt rod box
New oil filters on compressor
600 cfm / 250 air compressor
500 ft 3-1/2” OD by 2-3/8 IF drill rods
table bushings, etc.
Drive traction tires 60% percent & Steer tires 80% percent estimated

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Drilling Rig - Speedstar Quickdrill 600 for Sale
Used Speedstar Quickdrill 600 Drilling Rig for Sale
1984 Built Speedstar Quickdrill 600 for Sale
Speedstar Quickdrill 600 Drilling Rig for Sale in USA
Speedstar Land Drilling Rig for Sale in USA

-------------------------------------------------------------------------------------------------------

 
Land Drilling Rig for Sale
Worldoils Marketplace
Land Drilling Rig for Sale

Worldrigs ID: WR2915

Ideco 2100E Rig for Sale
Ideco Drilling Rig for Sale

Description :

Technical Specifications :
Drawworks
IDECO model 2100-E (s/n E-78) with 1-1/2” LEBUS grooving, FOSTER type 37-AH / 24-AH
air catheads, KOOMEY model CBS-RT2 crown block saver and (2) (GE 752 1000-HP series
wound DC motors JANUARY -2012) with 10-HP blower motors fitted with HUNT vertical air
cure filters. Last Overhaul: ID/TEC 03/2007 (New brake bands, kicker plates: 01/2008)

Auxiliary Brake
Baylor Elmagco model 7040W (s/n 10961W) rated @ 78,000 LB-FT torque @ 50 RPM with
PWM-20 control system, Drillers control, transformer with EXP rig floor emergency stop unit
& emergency stop indicator lamp. Note: Torrington bearing p/n 23040-W-BRC3 (34).
New coupling: 12/2005.

Battery Back-Up System
GBC model 18384–205 (s/n 1086): Input 230 VAC for charging – 240 VDC for Baylor brake
with Siemens 100 AMP, 250 VDC isolating switch and 12 VDC battery 20 N battery bank.

Anti-Collision System
MAN4 Hitec (s/n 038371) AE-1005 power supply unit Kinetic Energy Monitoring System: With
control unit (230V input / 28V output), direct-mount encoder (p/n CHHGTX-0004A), Drillers
display unit, emergency stop, audible alarm and height & weight sensors. New optical sensor :
01/2008. New drum tracking assy (A000565) and sensor (A000382) 09/2008)
.

Brake Water Cooling System
O&M model ESH-180-2F8 (unit s/n 151494): Designed for 300 GPM @ 55 DEG C ambient
c/w (2) Caterpillar 399 radiator coolers (Dolphin 08/2007) with 96” diameter fans each driven
by Baldor 10-HP (575 VAC, 60 Hz, 1760 RPM, EXP), 40-BBL water tank, Halco Supreme
model 2500 (3” x 2” x 12.5”) centrifugal pumps (2) each driven by Baldor 25-HP (600 VAC,
60 Hz, 1775 RPM, EXP) motor, 3” suction & discharge with check valves & butterfly valves
for 100% redundancy. Control panel with starters, switches, run lights. Sensors for: high
temperature - low fluid level - low flow.

Top Drive (VARCO  Upgrade: 5/2011)  Not available
DS 11SA VFD Drive Unit Consists of : VFD is available

1 Incomer/ Rectifier Cubicle
1250 Af, Lsi, Blit – In Cb W / Uv Trip
6 Pulse Air Cooled Diode Bridge Rectifier
Surge Suppression Net Work With Status Indicaters
Ground Fault Monitor
Ac Line Reactor
40 Amps Cb For 30 Kava Transformers
80 Amps Chopper Uni

Air Cooled Inverter Cubicle.
Direct Torque Control W/Profibus Communication Card and Speed Feedback Encorder Card
DC Pre Charge Circuit
Inverter Fault Indication Display
420 Kw 600/690 Volt Air Cooled Vfd Modules inculding Mode Filters and Out
Put Reactors
DC Input Isolation Switsh 175 Amps

Enclsure for Plc
Resistor Bank,- Edge Wound Air Cooled Resistor
Control Cubicle
60A Fused Switch For Aux Motor Starter
600 Vac Aux Motor Starter
2 Mavaier Ac Unit

Model 11SA with power distribution center (600 VAC, 60 Hz, 3-PH, 1200 AMPS), drive system
interconnecting multi-conductors providing interface between Drillers panel, top drive and
control electronics and fitted with emergency shutdown :

ABB Inverter Invo 1 and 2 Model
ABB Rectifier
Siemens Plc Panel Model CPU- 315-2dp (S7-300)
Abb Main Circuit Breaker (600 Vac, 1200 Amp)

Drillers Control Panel Varco System-3D-55701-60-1
Bartec Profix TYPE-073136-4025/0010 EX 11 -2 (1) EEX edm LIAL 11B T4, FNR 5068/09,
16X Digital Input Prof ADDR 08, Part No- 140698-2
PTB-02 ATEK 1159
.
Quill RPM gauge, torque gauge, pipe handler controls, control, mode selection, torque limit
controls (forward/reverse), emergency stop. System protection shutdowns.

Mast
Dreco Beam Leg model M-14230-1600 (s/n DHW-253-L153-09/81) NOI inspection: 08/2010 :
142ft H x 30ft W x 1,660,000 LBS (GNC) rated @ 1,200,000 LBS API SHL (12 lines).
Racking board capacity: 25,000ft (270 stands 5” DP) with 14 stands DCs & Ingersoll Rand
model BU7A-PTAB air winch (s/n BU8690397). Wind rating: 100 MPH full setback, 115 MPH
no setback. Raising Line: 2-1/4”D, 6 x 41, EIPS, RRL, IWRC, 145’ 6”L w/ open-closed spelter
sockets & 132ft 6”L w/ open-open spelter (01/2012)
Mast Load off Headache Rack : 140 MT

Crown
Dreco model 860C-742 rated @ 650-T SHL (740-T gross) w/ (7+1) 60"OD x 10”D
shaft x 1-1/2" sheaves (Replaced 02/2011).

Casing Stabbing Board
Dreco counter-balanced-adjustable type to API Spec 4E (s/n NDSC-5003): with
positive-engaging brake and Ingersoll Rand model ML500K 0.5-T air winch (s/n 14024)
with remote pendant control.Recert: AOTC # 452 (08/2005).

Deadline Anchor
Superior model E-120 (s/n R-2164) equivalent to Dreco model LOF-100-T: 50-T capacity, 29”
diameter, leg mount for 1-1/2” line and Martin Decker type E-80 tension type load cell sensator.

Drilling Line
Powered reel with 5-7/8” diameter shaft and 7,500ft of 1-1/2” drilling line to API 9A.

Substructure
Dreco Slingshot (s/n E7-475-579): 33ft H x 40ft W x 40ft L (27ft 3” clear height)
rated @ 1,200,000 LBS with 800,000 LBS setback load. Drip-pan enclosure for
rotary and setback, telescopic/adjustable bell nipple. (1) set 45ft L steps, (1) set
25ft L steps, handrails, Allen Get-Away evacuation slide, 6ft W x 44ft L V-door,
2-piece catwalk (5ft W x 60ft L x 21”H).  Raising Lines (01/2012):
2 x 1-1/2”D x 750ft L ungalvanized, 6 x 36 IWRC, 1960 BT, RHO, MBL c/w open
spelter socket fitted by resin one end & other end open.

Slingshot Raising System
Lantec model 4135 (2) hydraulic raising winches (NOV Service: 6/2010):
Powered by Abcor HPU (s/n R10-HU-SWN). Lamprell Service: 06/2004,
with Baldor model M4316 (s/n 11/81) (Intersel 04/2003) 75-HP motor
(575V, 69.6 amp, 60-HZ, 3-PH, 1760-rpm, EXP), 200-gal hydraulic tank,
local & remote controls.Raising Lines (01/2012): 2 x 2-1/4”D x 132.6ft L &
145ft L, SWL 47.2 ton, 6 x 36, IWRC, RRL wire rope slings .

BOP Handling System
Dreco 50-Ton SWL (s/n 0156101330-1, 0156101330-2): 25-ton SWL hoists
(2) (NOV Service: 12/2011), hydraulic rack & pinion with remote control console
(powered by Abcor unit). Raising Lines (09/2011): 2 x 1-1/4”D x 43.5ft L, EWL,
6 x 36, IWRC, RHRL wire rope slings w/ 1-1/4" G416 Crosby open spelter
socket both ends.

Doghouse
7ft 10"W x 7ft H x 20ft L with lighting panel, Drillers remote BOP station and Petron remote.
Install BOPC closing unit Remote control panel EEGRB08AP- HMI/PLC Siemens
Simatic Mult Touch Panel

Power Control System
Ross Hill model 1400, 4-bay SCR (s/n 5546/81): (4) AC generator controls
(600V, 1445 AMP, 1550 KVA), (4) GE 1600 AMP circuit breakers
(CAT # TPR-5616-Noarhc), (4) DC SCR bridges (input: 600V, 1470 AMP
AC; output: 750 DC, 1800 AMP DC) with (4) GE 1600 AMP circuit breakers
(CAT # TPY-5616), (1) GE 1600 AMP circuit breaker for MCC
(CAT # TPRR-561-NRHC), (11) GE 7700 line control center panels
(230VAC, 3-PH, 4W, 60-HZ, CAT # 474X0443001), (1) GE 600/220VAC circuit breaker
(CAT # TB-43F) for (3) 220VAC transformers, (1) GE 600 VAC circuit
breaker (CAT # TJK-436F000) for (1) 460VAC transformer. Main in-coming
plug panel with lockouts for DW, MP-1, MP-2 and RT functions.

PCR upgrade by M&I Electric Industries (w/o W834-700-97):
- RHCC upgrade: AC control modules (4),
- 600VAC (primary), 460VAC (secondary) 300KVA xformer for all auxiliary DC drives
- Install 0-200 milli-Amp meters from actuators to read kW load sharing: Run mode 1200-RPM,
35-45 mA. Full load 160 Ma.
- Install DC Amp meters from generator exciters to read load sharing.  
- PLC alarm system installed for: (a) engines; low coolant level, high coolant temp,
low oil pressure, metal particle detector, generator overspeed, (b) brake-water
cooling; low fluid level, high coolant temp, (c) mud pit purge panels (2) for H2S
& CH4 (PLC activates alarms via Gaitronics PA system).

Shunt To Series Motor Modfication- Nov – January-2012.
Installed Dynamic Brake Model 1461, Dc Power Cable And Control Cable Inter Connection,
Sproket Slip Pc Card, Hed, Voltage Feed Back Pc Card , Dc Module, And Power Recptacle
For Dc Power Out Lets.

Transformers
- Ross Hill Controls type HSUL (3): 600V-127/200Y, 100-KVA, 60-HZ, 1-PH, Cat #100S9XH6C,
4.9% imp, 150 C Temp Rises (s/n 70101-881, 70102-881, 70103-881).
- Sunbelt: 600V/480Y/277, 300-KVA, 60-HZ, 3-PH 5.64% imp, 150 C Temp Rise (s/n 22459).
- ITC type HTUL: 600V/240Y, 25-KVA, 50/60-HZ, 3-PH, Cat #2832H3DC, 3.6% imp, 150 C Temp
Rise, (s/n 726856-10/81).
- Victor (UAE) model GPTS/100K: 100-KVA, 50/60-HZ, 3-PH, Class H, 115 C temp rise, 600V
delta primary, 480V star secondary, 96A primary, 120A secondary, standard IEC726 (s/n 18216/06).
- Marcus type IW: 600V/416/240, 112-KVA, 112-HZ, 3-PH, 3.4% imp, 150 C Temp Rise
(s/n 8803-797).

Aux. Brake Controller
Baylor model PWM-20 for model 425L Drillers console.

A/C Units (2)
Trane model TTA120-A300BC, 10-TON single compressor split units

Cable Grasshopper
8ft W x 30ft L electric cable tray skid with oscillating cable arm to rig floor and (1 lot) cable trays
with covers.

Generators
KATO synchronous, brushless, 2-bearing AC (1500 KW, 347/600V, 1875 KVA, 3-PH, 60 HZ,
0.8 PF, 1200 RPM, 1806 AMP, 90 DEG C temp rise, field volt 100, field AMP 4.3) :

1. Model 1500-685361111 - type 21676 - Cat. #6P7-2050 - s/n 36739-85926-1
2. Model 1500-685361111 - type 21676 - Cat. #6P7-2050 - s/n 36741-85926-2
3. Model 1500-680361111 - type 21676 - Cat. #6P7-2050 - s/n 36738-84485-3
4. Model 1500-680361111 - type 21676 - Cat. #6P7-2050 - s/n 36740-84485-2

DC Motors
GE-752 and Juliot series -wound rated at 1000-HP continuous (750 VDC, 1150 AMP, 965 RPM)
with Class H insulation, pressurized connection box, auxiliary lockout switch and 10-HP
(460 VAC, 60-HZ, 3275 RPM, EXP) blower motors mounted on HUNT model 752V-RHB/LHB
vertical air cure filters. Note: Power cable connections are pin type and 20-pin receptacle is
Pyle National male (p/n ZREP 20332 PN). Refurbished January 2012

Main Engines (4)
Caterpillar series D3512 DITA (4), 1435-HP/1000-KW @ 1200-RPM fitted with
Woodward EG-10P actuators, injector group 4P 9075, turbo group 12 8187, marine duty
air cleaners, Spinner II oil centrifuges with AMOT metal particle detectors & oil level switch
gauges, Racor primary fuel filters, Bicera crankcase explosion relief valves, 12” exhaust outlets,
HMSO protection system for low oil pressure, high water temperature and over speed air
inlet shutoff.

- CAT #1 - 3512 Arrangement # 2W 8869 (s/n 67Z 01953)
- CAT #2 - 3512 Arrangement # 2W 8869 (s/n 67Z 02173)
- CAT #3 - 3512 Arrangement # 2W 8869 (s/n 67Z 02213)
- CAT #4 - 3512 Arrangement # 2W 8869 (s/n 67Z 02212)

Engine Cooling
O&M (drawing # 10569-402) (s/n 1-151426/7/8/9) desert-duty jacket water heat exchangers with
updraft design rated @ 150 PSI MAWP (O&M #128156) & converted to standard over-sized
water tanks with independent water pump to after-cooler.

Fuel Tank #1
Crude Settling Tank: 8.5ft D x 30ft L x 300-BBL (48m3) horizontal, cylindrical on
10ft W x 40ft L x 3-runner skid with 27” manhole, 2” vent, 4” fill connection, 2” drain,
sight-level gauge and 3” x 2” centrifugal transfer pump with 3-HP, 60-HZ, 460VAC motor.

Fuel Tank #2
Clean Crude Tank: 9.8ft D x 26ft L x 346-BBL (55m3) horizontal, cylindrical on
8ft W x 33ft L x 2-runner skid with 24” manhole, 2” vent, 4” fill connection, 2” drain
and sight-level gauge.

Fuel Day Tank
HEMT 50-BBL (7.5m3) skidded crude day-tank: With Roper type 1 gear transfer pump driven by
3-HP 460V 60-HZ motor.

Diesel Tank
HEMT 60-BBL (10m3) rectanguler (s/n A318-2333) on 19.7ft L x 8.2ft W x 5.9ft H skid with
fuel filtration unit and Roper type 1 gear transfer pump driven by 3-HP 460V 60-HZ motor.

Air Compressors (2)
Gardner-Denver model EDFQLC (s/n R-00329, R028331), oil-injected, rotary screw type rated
@ 309 SCFM (each) @ 125 PSI driven by model 24CA-3240 AC motor 75-HP, 575VAC, 60-HZ
(s/n 97600010, 97600011) inside high ambient NEMA 4 enclosure (spare air-end common
for Rigs -10/31/32).

Cold-Start Compressor #1  Not Available

Air Dryer (2008)
Great Lakes model GPS-1000-N4-116 (s/n 31303) heatless, regenerative dessicant (p/n 692001)
type, 1000 SCFM flow @ 100 psig with ASME coded twin towers rated @ 150 psig, solid state
timer, pilot air filter, 110V Nema 4 control, model GC-1000-SA coalescing pre-filter and model
GP-1660 particulate after-filter.

Vertical Air Receivers (3)

Horizontal Air Receivers (2) Not Available

Air Hoist : Ingersoll-Rand type FA2.5-16M rated @ 2.5-T SWL (s/n 73185)new installed 02/2012.
Air Hoist : Ingersoll-Rand type FA5-MR24MK1G rated @ 4.5-T SWL (s/n A017075) new
installed 02/2012.
Man Rider : Not Available

Mud Pumps (2)
1.Emsco Model T-1600 triplex, 7-1/2" bore x 12" stroke (s/n 74, 102) with Southwest
style 2-piece forged fluid ends (p/n KOP Femt1316SUCSW, Femt1316DISSW), Ideco
unitized V-belt pump drive, HYDRIL type K-20 5M WP pulsation dampener (RX-39),
suction/discharge strainers, 0-10M PSI pressure gauge, Falcon type C flanged RRV
(1,500-5,000 PSI operating range), Demco 2” 5M WP bleed-off valve, Halco type S
(1-1/2" x 2"R x 8-1/2”) centrifugal liner wash pump (s/n 04181) with Marathon 3-HP
EXP motor. Each pump powered by (2) GE-752, 1000-HP seres-wound DC motors
with 10-HP blower motor (January -2012) mounted over Hunt vertical air cure filter.
Power ends fitted with dual electric & mechanical lube system.
S/N 74: New bull gear & pinion (02/2004). New bearings main/pinion (08/2007)
S/N 102:     New bull gear, pinion, eccentric & crosshead bearings (03/2005)


Mud Pump (1)
Loadmaster model LMF-1600 triplex, 7" bore x 12" stroke (s/n LMF-101) with single piece forged
fluid ends, metal to metal liner lock system, self-aligning rids with dual tube rod clamps, unitized
V-belt drive (8/8VP3000 Kevlar V-belts), model KB-75 5M WP pulsation dampener (RX-39),
suction/discharge strainers, 0-40,000 kPa pressure gauge, Retsco 3” type C flanged RRV
(1,500-5,000 PSI operating range), 2” 5M WP bleed-off valve, liner wash pump (1” x 1-1/2")
with 3-HP EXP motor (230/460V, 3-PH, 60-HZ), powered by (1) GE 752 1000-HP series -wound
DC motor(A) Jouliot 1000 HP Series Wound DC Motor (B) (January 2012)each with 10-HP
blower motor mounted over Hunt Air Cure filter. Power end fitted with triple redundant lube
system : Internal splash/gravity feed, internal gear-driven pump, external gear pump driven
by 480V, 3-PH, 60-HZ EXP electric motor and pressurized lubrication to lower crosshead slides.

Mud Lines & Manifold:
Gate Valves (6) : Demco 5” 5M WP
Gate Valves (4) : Demco 3” 5M WP
Gate Valves (4) : Demco 2” 5M WP
Gate Valves (1) : Demco 4” 5M WP
Plug Valves (4) : 2” 10M WP with Fig.1502 unions (cement manifold)
Mud Gauges (2) : Oteco 0-6000 PSI
Bleed-off Choke : CIW 2-1/16” 5M WP manual choke
Transmitter Flange : Petron instrument flange with Fig.1502 misaligning unions
Dual Standpipes : 4”ID 5M WP x 160 DEG goosenecks with Fig.1002 top unions
Cement Standpipe : 2” x 12m x 10M WP with flexible hose
Dual Sub Lines : 5” 5M WP with Fig.1002 unions
Dual Kill Lines : 2” XXHVY 10M WP

HP Hoses - Standpipes to TDS Swivel (2) : Not Available
HP Hoses - Sub Base to Standpipe Manifold (3) : Not Available
HP Hoses - Mud Pumps to Sub Base to Standpipe Manifold (5) : Not Available.

Rotary Table
Ideco model 375-E (s/n 176): Rated bearing deadload capacity 700-T. Rated
rotating load 434-T. Ideco model T-2 2-speed gearbox (s/n 5305900), GE-752
1000-HP series -wound DC moto (January 2012) with 10-HP (460VAC, 60-HZ,
3275 RPM, EXP) high-output blower motor mounted over HUNT vertical air
cure filter. Last Service: ID/TEC 09/2005.

Master Bushing (2)
CAM-Tech model MPCH (s/n NDSC-5236) & (spare) Varco model MPCH
(s/n R-2157): 37-1/2” pin drive c/w API bowls (#1-2-3), 4-leg & 2-leg slings,
bit breaker adapter plate.
In Service: 01/2007.

Hook-Block
Ideco Shorty model UTB-525-6-60 (s/n 618): 525-T API rating with unitized hook
and (6) 60” OD x 1-1/2”D grooved sheaves. Hang-off sling: 1-1/4” D x 114ft L.
NOV Service: 02/2010.

Swivel
National Oilwell model P-500 (s/n T-5268): API 500-T rating with 5M PSI WP - 15
DEG API angle gooseneck, 4” Fig.1002 union, 7-5/8” LH REG connection and
spare washpipe assy (p/n 703429-G1U).

Kelly Spinner
Varco type 6600 pneumatic (s/n 6D15X545): With (1) motor for RH/LH rotation,
control lines, foot valve and 6-5/8” REG LH box-up/pin-down.

Kelly
Inter Drill 5-1/4” hexagonal, 6-5/8 REG LH box x 4-1/2 IF pin (6-3/8” OD x 2-13/16” ID)
x 40ft L x 37ft working length (s/n K5BA004).

Choke Manifold
CIW (s/n 00-1293) 10M WP (11) valve, H2S trim: EEC Ultraflow type E-C 3-1/16” 10M
WP (BX-154) hydraulic drilling choke with control panel (see below), J-2 transmitter
flange and EEC style H-2 3-1/16” 10M WP manual choke. Wesco Recert: 10/2007.

- MGV (1) : CIW model FC 2-1/16” 10M WP, BX-152
- MGV (6) : CIW model FC 3-1/16” 10M WP, BX-154   
- MGV (2) : CIW model FC 4-1/16” 10M WP, BX-155
- MGV (1) : CIW model FC 4-1/16” 5M WP, RX-39
- MGV (1) : CIW model FC 3-1/8” 5M WP, RX-35

Choke Control Console (2008)
MCM (CIW style) with digital pump stroke counter, 0 - 40,000 kPa drill pipe pressure gauge,
0 - 70,000 kPa casing pressure gauge, choke position indicator, choke speed adjustment
switch, hydraulic fluid supply with back-up hand pump, hydraulic pressure gauge and limit
switches-brackets-clamps for two pumps.

(Spare Choke Control Console) Valvcon (CIW style) with EEC digital pump stroke counter,
0 - 40,000 kPa drill pipe pressure gauge, 0 - 70,000 kPa casing pressure gauge, choke
position indicator, choke speed adjustment switch, hydraulic fluid supply with back-up
hand pump, hydraulic pressure gauge and limit switches-brackets-clamps for two pumps.

BOP Closing Unit
BOPC DCS TM 9 Station Control System  Cordyne Industrial Motor And Drives
330-2K50-E40GD-U23M-6-1 (s/n 6131): 330-GAL 6-station with 400-GAL reservoir, (22)
Nippon 15-GAL accumulator bottles, (2) Graco model 208-003 type K-50 air pumps
(45:1 ratio, 3.3 GPM each, s/n A5535), Gardner-Denver model PS-172 triplex
(type UET40-HTHT-600) with WEG40-HP explosion proof motor (460 VAC, 1770 RPM).
GPES Recert: 12/2005.

- Accumulator : Model TB3305B.
- Manifold : Model UMGT2R06P10 hydraulic w/ 1”, motor-driven, failsafe regulator
- TR Regulator (auto) : Model PTR-5-1500-0-10 (s/n 9018)
- TR Regulator (manual) : Model MTR-5-1500-0-10 (s/n 04020)
- Driller’s Remote : Model AOGPR006-FC, 6-station air-operated w/ open/close display
- Toolpushers Remote : Model EE GRB08AP-HMI/PLC Siemens Touch Panel
- Air Inter-connect Cable Assy : Model 100-JG37JG
- Air Shuttle Valve Assy : Model SV12SV19 (operates 4-way c/valve - both remotes)
- Low Pressure Alarm : Model LHP - Low Fluid Level Alarm: Model LFL
- Pipe Rack Assy : Model PRMG40-13 32’L with 15 x 1” x 6M WP steel control lines
- Control Hoses : Spec. 070-5000 5M WP S/S armored (10 x 34ft L, 2 x 38ft L, 12 x 8ft L)

Drillers Console
Petron model IDS-2000 RIG SITE MONITOR with Pentium-based computer,
1.4 KVA UPS (2), remote printer and display with graphics printout and DrilGraph
remote. Sensors for active pits (5) including: PVT, trip tank, flow-out, pump SPM,
TD, ROP, bit tracking, pipe velocity, hook load, WOB, pump pressure, rotary RPM,
rotary torque. IDS indicator model HKL-A000063. IDS indicator sensor
model P000010 (2).

Weight Indicator :
- Petron type EB (16”) model AWE9-1 (s/n 0325).
- MD-Totco type EB (16”) series AWE (s/n 1024).
- Petron type E80 (s/n M2073) tension type sensator.
- MD-Totco type E80 (s/n 0202309) tension type sensator.

Hydraulic Analog Gauges/Sensors: for tong torque, pump PSI, flow indicator, trip tank

Auto Driller
Mattco Bearcat (s/n 8036): with pneumatic controller and feedback.

Drift Recorder
Martin Decker-Totco 8 DEG & 16 DEG: double recorders c/w accessories.

PA system
Atkinson Dynamics Intercoms Model AD 26-8 Gaitronics Page-Party with 12-stations
(rig floor/choke manifold/shaker tank/suction tank, workshop, offices [3],
SCR/substructure/guard cabin/elect store) and tied in with the PLC via a tone
generator for CH4, H2S and enginge control audible alarms.

Monkey Board PA
Atkinson Dynamics Intercoms Model AD26-8: For Driller-Derrickman with type
hands-free remote at monkey board.

Rig Workshop
Toes design 3-section Mechanic/Welder workshop, store & cool-store on 3-runner skid.
Each section: 10mL x 3.2mW x 3.2mH with roof and 2-TON SWL lifting beams over
Welders workshop. Includes small air receiver

Diesel Genset (Unit s/n NDSC-5232)
Engine :
CAT D3306 DITA (s/n 85Z10817, a/n 7C 9312), 1500-RPM, 296-HP with
Woodward type PRG governor
Alternator : CAT SR4 (s/n F5A07024), 400V, 1500-RPM, 244-KVA, 195-KW, 50-HZ
Fuel Tank : NSF 2m3 x 1.9mL x 1.4mW x 1.6mH x 0.9-T (JN 8017-04/08)              

Motor Genset (Unit s/n NDSC-5234)
Motor : Marathon 4J444T: 100-HP/600VAC/60HZ/1185RPM (s/n AE580153)
Alternator : Newage model 350-28700, 415VAC, 50-HZ, 65 KW (Intersel 10/2006)

Rig Offices
Air-conditioned, 4-office, laboratory, mess, storeroom with (6) cabins, each on
3-runner skid, mounted on two (2) 3-runner master skids with (2) independent
50-KW genset power supply sources:

Skid #1 :
- Toolpusher cabin with TP office (front) and Materialman (rear) with WC
- PE cabin with office, WC
- Client cabin with office, shower, bedroom. Installed: 10/2005

Skid #2 :
- Service Company cabin with (4) rooms (4 beds) e/w ablution (s/n NDSC-5270)
- Senior mess and CM/CE office
- 55m3 potable water tank with (2) pumps, filtration and chlorine injection

Skid #3 :
- Mud lab cabin with 1-man accommodation
- 2-room cabin with 2 beds for TP & PE       
- Safety training cabin. Installed: 12/2005

Skid #4 :   
CH Mech/ CH ELECT: Single skid 10.5mL x 3.5mW with furnished,
WC/shower & bedroom. Installed: 2011

DP Bins (10 : 37ft L x 8ft W on 3-runner skid (35-T SWL)
DC Bins (04) : 37ft L x 8ft W on 3-runner skid (35-T SWL)
Junk Bins (3) : 30ftL x 7ft W on 3-runner skid (35-T SWL)
Pipe Racks : 42”H x 27ft L (8), 20”H x 27ft L (8), 42”x13”L (2)
Seatainers (5) : 20ft L x 8ft W x 8ft H (10-T SWL)
Tool House : 27ft L x 7ft 10"W x 8"H on 3-runner skid.

Mobile Camp
(24) air-conditioned cabins, each on 3-runner skid, mounted
on nine (9) 3-runner master skids.

Accomodation Rig & Camp
Rig Senior Staff : 9 Beds
Camp Senior Staff : 30 Beds
Camp Junior Staff : 68 Beds
Total Beds : 107

M/Skid 1 : (3) cabins: (6) senior rooms (24 beds)
M/Skid 2 : (3) cabins: (4) senior rooms (8 beds) with center ablution
& (2) junior (8 beds)
M/Skid 3 : (3) cabins: (3) junior rooms (12 beds), (1) senior room (1 bed).
Clinic-Medic room (2 beds including sick bay bed) with center ablution (2)
M/Skid 4 : (3) cabins : (6) senior rooms (9 beds)
M/Skid 5 : (3) cabins : (6) senior rooms (11 beds) with center ablution (1)
M/Skid 6 : (3) cabins, 2) junior rooms (8 beds), dry store, cold store
M/Skid 7 : (3) cabins : senior mess, galley, junior mess ( up graded)
M/Skid 8 :
(3) cabins : ablution block, laundry, GRP water tank (55m3)
(2) cabins : 2 x 4-man JS sleeper

Mosque :    30ft L x 10ft W skidded with AC.

RO Unit :    Ecowater Systems model ESM-18CE (2.8m3/hour max output)
with booster pump and model LBR8 UV sterilizer. Installed : 08/2004.

Skid 9 – Camp Generators :

Engines (2) : Caterpillar model 3406 TA (S/N 2WBO2668/2WBO2667,
A/N 4W3805), 1500 RPM, 362-HP, 270 kW with Woodward type PRG
governor and fitted with crude oil heaters.
Generators (2) : Caterpillar model SR-4 (S/N 6BA02075/6ba02080,
A/N 5N8662), 1500-RPM, 300-KVA, 240-KW, 400VAC, 50-HZ, 433-AMP.

Electrical DB : Indent # DC61/4/30916 PDO-A1, Holec # 242.402-1985,
System 3-PH, 4 wire, 414V – 50C/S rated operating voltage, 1200-AMP
rated current main bussbars, 50KA – 1 SEC rated short-time withstand
current, 110 KA rated peak withstand current, IP54 degree of protection.

Fuel Storage : 12,000L settling tank with 4,000L day-tank and transfer pump

Skid 10 – Camp Workshop
20ft L x 8ft W x 9ft H sea container with shelves, workbench, vice, lights, AC
and ABAC model B3800-200CT3-V400CE portable air compressor
(lot #387066-0010) with model 3700060 air end (lot #016781-0299) and
KEW 3-PH type Y90L-2 230/240V 2.2-KW 50-HZ induction motor
(unit s/n NDSC-5287)

Guard Cabin : 18ft L x 10ft W X 8ft H skid with 1.5-T air-conditioner.

Rig Mosque : 13ft L x 10ft W x 8ft H skid with 1.5-T air-conditioner.

Training Room
Fire Alaram System :  Model No CFP 2/4/8/ Zone Conventional Fire Alarm
System Connected to all the cabins in the camp site And Installed Control
Panel in the Sr Mess Room. Installed May 2012.

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------
Search words (for official use only) :
Ideco 2100E Rig for Sale
Land Drilling Rig for Sale
Ideco Drilling Rig for Sale
Ideco Mechanical Land Drilling Rig for Sale
Ideco 2100E - Land Drilling Rig for Sale
---------------------------------------------------------------------------------------------------
 
CTU for Sale
Worldoils Marketplace
CTU for Sale

Worldrigs ID: WR435

Coiled Tubing Unit for Sale
CTU for Sale

2013 Built Trailer Mounted Coiled Tubing Unit

1.0 General Description
1.1 All components are brand new and not used.
1.2 All equipment has reasonable load distributing. The whole equipment has
the capacity of shock resistance and rough road running. The unit is suitable
for driving in rough terrain of oil fields and common highway.
1.3 Control system, instrument box and related devices have nice sealing performance,
water proof and shock resistance.
1.4 All equipment is capable of operation in ambient temperatures of -30°C to 45°C.
1.5 All equipment is located reasonable, which is easy for operation, checking and
maintenance, caution marks for deck equipment and completed protection device for
uncovered running components and high temperature components. All discharging ports
point to safety position and are built under standard of HSE.
1.6 All related documents will be provided.
1.7 All equipment is built under the quality standards of API/ASME/NEC/ISO.
1.8 All equipment is well designed and constructed for safety operation of operators. Welding
department should have nice quality and enough strength. Self-lock nuts should be use as
much as possible.
1.9 All electrical circuits have code marks and all hoses have S/No. labels, which is easy
for connection with related connector.
1.10 All hoses and electrical wires are packed steadily, complete with clips for support
and fasten.

2.0 General Structure and Technical Specification

Components
Specification
Qty
Trailer
four axle trailer
1
Power Pack Engine
1
Control Cabin
Closed Type
1
Injector
ZRT-80K, with 100gooseneck
1
Reel Assembly
LGGT150”-78”-78
1
Injector Control Hose
40m (130ft)
1
Injector Power Hose
40m (130ft)
1
BOP Control Hose
40m (130ft)
1
Hydraulic System
 
1
Air Circuit System
 
1
Stripper
4.0610000psi
1
BOP
4.0610000psi
1
Electrical System
 
1
Lubrication System
 
1
Digital Data Acquisition
 
1

 The Trailer Mounted Coiled Tubing Unit is composed of four axle trailer,hydraulic system,
reel, power pack,injector, injector control hose reel, injector power hose reel, lubrication system,
electrical system, control system, instrument control cabin, wellhead control equipments
and so on. The Trailer Mounted Coiled Tubing Unit is used for many oilfield services applications
like gas lift, acidizing , fracturing and so on.The operation of the Trailer Mounted
Coiled Tubing Unitis centralized in or around the control panel in control cabin, which can ensure
the operator can easily and clearly monitor all control switches, instruments and the working
condition for all systems. Lights are installed above the reel and engine, which are easy
for night working.

CTU Performance Parameters :

 
Injector Continuous Pulling Capacity
 
80,000 lbs (36,000Kg)


Injector Continuous Snubbing


Capacity

 
40,000 lbs (18,000Kg)
 
Max. Speed of the Coil Tubing

190ft/min(58m/min
Total Weight
Approx. 39,000kg(86,000 lbs)
(without tubing and tractor)
Overall Dimension(L×W×H)


A
pprox.16,000mm × 2,600mm × 4,450mm
(630in × 102in ×175in) (without Tractor)
 
 

3.0 Trailer
Frame Rating : 66,000kg (145,500lbs) maximum capacity without trailer
Dimensions : 15,240mm(length) X 2,600mm(width) (600in X 102in)
Gooseneck : 3.5? kingpin
Axles : four axles, 22,700 Lbs /axle. capacity
Tires : sixteen (16):275/70 R22.5
Other : equipped with ABS
Voltage : 12V

4.0 Power Pack
DDC S60 turbocharged diesel engine,525hp@2100rpm,4 stroke, 6 cylinder,
detailed specification is as following :
- Electronic Engine Management System
- Equipped with starter(Anti-explosive battery. Air starter for diesel lubrication of starting device
and 30 gal air receiver tank?12 CF air compressor fixed with engine.Alternator
- Horizontal muffler,with rain cap
- Heavy duty air cleaners (for desert) with restriction indicator
- Equipped with emergency kill
- Bendix 0.37m3/min air compressor and air system that will include an air receiver, air dryer,
water separator, air filter, bleed valves, check valves, control valves, gauges and hoses.
Air compressor will maintain 0.8 Mpa in the air receiver tank.In addition, a connection will be
provided for remote charging of the air tank.
- Spark arrestor and Emergency shut off system
- Diesel oil tank Volume: 500L
- Hydraulic system:
- Main hydraulic system: injector is driven by variable displacement, axial hydraulic pumps.
- Tubing reel driven hydraulic system: independent hydraulic pump will provide power
for the coiled tubing reel drive motor.

- Auxiliary hydraulic system: separate pressure compensating pump provides power
for following system :
hose reel hydraulic motor, level wind hydraulic motor, level wind lifting  hydraulic cylinder,
injector traction and tension system, BOP control system.
Level wind compelling hydraulic motor
Level wind height control hydraulic cylinder
Flexible Hose hydraulic motor
Control cabin lifting cylinder
BOP hydraulic cylinder
Injector chain tension system
Injector chain traction system
Injector speed adjustment system

Handle pump system: handle pump system is installed in control cabin, which is used
to provide emergency power for BOP ram, stripper and injector chain traction system
- Energy accumulator system: this system is installed in hydraulic power pack.
4 high pressure nitrogen reservoirs can provide spare power for BOP control system.
- The capacity of each accumulator is 10 gallons ( 37.85L)
- Except above mentioned parts, the hydraulic system also contains followings :
Hydraulic Oil tank with temperature gauge and level indicator.
Gauges of hydraulic pressure
Oil cooling system
Hydraulic system returning loop filter
Necessary pressure relief valve, safety valve and hydraulic hose
- The hydraulic power pack is skid mounted and has a four point lift protective frame.
- Carbon steel hydraulic oil tank capacity: 650L

5.0 Control Cabin
- The unit will be fully operational from the operator’s control cabin with the use of
mechanical, hydraulic and pneumatic controls.
- The control cabin will have four hydraulically lift cylinders to elevate the cabin for
ease of visibility over the tubing reel.
- Long type control cabin. The long type cabin is professionally designed for quiet
comfort and to provide a safe operating environment for the operator and customer.
- This control cabin design will feature :
- Door will have heavy duty lockable latch
- Safety glass installed on all four sides of control cabin : front window with safety
guard screen and windscreen wiper,  the back side door with fixed  window and 
both sides supplied with large area emergency slide windows
- A complete lighting and electrical system with all necessary plugs and switches
will be installed.
- Operator’s chairs, etc. will be installed in the control cabin.
- Heavy-duty rubber insulated floor covering, fire resistant.
- The Control Cabin will be heated and cooled by a high capacity rear mount air
conditioning and heating unit. The air conditioning and heating unit shall provide
adequate cooling and heating for the operating temperature range of the unit.
- Four (4) flood work lights will be installed on the outside of the
Control Cabin (two (2) at the rear facing the tubing reel and
two (2) in the front).

- Standard equipment in the control cabin will be :
Stainless steel console and panels
- LED Internal indirect lighting system
- Captain’s chair mounted behind control console
- Control cabin is equipped with external alarm horn controlled from the
control cabin.
- All hydraulic connections to and from the control cabin will be via a
hydraulic bulkhead.
- An air driven pump used to deliver 5,000 psi to the stripper over the 3000 psi system
pressure. This pump also has a handle and can be used as a second
manual back-up pump.
- A full control console will be installed in this cabin. This console will be of
stainless steel construction and be fully labeled with all gauge and control information.
The panel will be mounted on an engineered fabricated housing that incorporates the
back-up pump, hydraulic valves, interface, etc.

- The following controls and gauges will be installed in this control console:
Weight indicator to be Metric (Kilograms) and pounds
Well head pressure gauge in Megapascals or PSI
Circulation pressure gauge in Megapascals or PSI

Engine controls and gauges :
Engine EDM Display Module to provide the following information :
tachometer/hourmeter readout
engine oil pressure & temperature readouts
water (coolant) temperature readouts
Engine throttle
Engine normal stop
Engine emergency stop
System air pressure
Fuel level gauge

- Injector controls :
In/out control hydraulic joystick with friction detent
- Speed control regulator valve for maximum and minimum injector motor
displacement contr
- Three sets of the traction circuit valves to secure the traction of the coiled tubing.
These valves are indicated as upper, middle and lower allowing
- Each traction control valve has an individual pressure gauge
- Traction pressure regulator valve with regulated pressure indicator
- Chain tension control valve with individual pressure indication, “Pressure,
Run and Dump”
- Chain tension regulator valve
- Injector drive pressure gauge glycerin filled
- Injector Emergency Brake control

BOP controls :
- BOP ram/auxiliary control bank valve – quantity of nine (9).
- BOP safety control valve
- Stripper packer hydraulic control valve and a quantity of two (2) pressure gauges
- Installed at base of control panel will be two (2) hydraulic hand pumps
with auxiliary hydraulic reservoirs
- Tubing reel controls and gauges :
Tubing weight indicator
Tubing reel tension (speed) control valve
Tubing lubricator control
Additional cabin controls and information:
Light switch
All pressure gauges to be Metric (Megapascals) or PSI

6.0 Tubing Reel
Tubing reel is installed in the trailer and adopts embedded structure. The parameters are :
Tubing Reel Flange O.D. – 150″
Core Dia. of Drum: – 78″
Tubing Reel Width – 78″
Max. Reel Capacity 2″– 6300m

Reel Support Frame
The reel supports are fixed a-frames that are skid mounted and attached to the trailer
via pins. Each a-frame includes a bearing carrier which is pad mounted on the top
each a-frame upright to provide spool change capability. This feature allows the reel
to be either raised out of or lowered into operating position from one location.

Reel Drive
The driving system of the tubing reel includes motor and gearbox, which are installed
on the road side of the trailer. Complete with one quick joints connection plate, which
is easy for the connection of the reel and hydraulic power.

Rotating Joint and High Pressure Manifold
The high pressure manifold includes swivel joint, piping. Rotating swivel joint and
piping will have a maximum working pressure of 15,000 psi, integral figure 1502 union
will be flanged to inside of pump-through shaft for connection to tubing.
Level Wind :
Level wind assembly will allow tubing angle to vary from a minimum of 10° up to a
maximum of 85° elevation (from horizontal), and is raised and lowered via
hydraulic cylinders. Pivoting guide is designed to allow easy tubing installation.
Pivoting guide can be used with either mechanical or electronic encoder for
counting tubing depth metering. The tubing counter will adopt a “V” Roller design
to accommodate tubing sizes from 1 ¼″to 2 7/8″O.D. tubing. The mechanically
controlled level wind system will track down from 1 ¼″to 2 7/8″ tubing during
pay-in / pay-out operations and includes a manual override control.
Lubrication System :
A remote control pneumatic tubing lubrication system mounted at the rear of the
counter. The lube oil reservoir is located between the tubing reel and power hose reel.

7.0 Hydraulic Power Hose Reel and Hose
- One BOP control hose reel has 20 ports. Length of the control hose is 40 m (130 feet).
- One injector control hose reel has 20 ports. Length of the control hose is 40 m (130 feet).
- One injector power hose reel has 2 sets 1-1/2″X 40m (130 ft), 5000psi hose.
- This hose reel is hydraulic driven with local hydraulic control valve.

8.0 Injector Head
- Model:JR-ZRT80K
- Continuous Pull Capacity:80,000 lbs
- Continuous Snubbing Capacity:40,000 lbs
- Maximum Speed:190ft/min

Patent grippers adopt removable design. Suitable for coiled tubing size from 1.25″to3.5″.
This injector is capable of 2″OD Coiled Tubing.

- Out frame support can bear 90,000lbs snubbing or pulling load.
- Dual planetary gear transmissions are designed specifically for coiled tubing unit application.
- 2 sets of variable displacement, axial piston hydraulic motors.
- Counterbalance safety valves are installed in hydraulic motor or distribution manifold.

Modular brakes are mounted between the motors and gearboxes and are spring
applied/pressure released.

- All chain gears have induction high hardness gear.
- Spline top drive has fixed axis and chain gears.
- Inline bearing traction system is suitable for traction strength reaches top and
the grippers will have no dislocation.
- 3 sets(6 each traction oil cylinder adopt inside installation design.
- Pocket accumulator is installed in traction loop.
Injector chain lube system is activated by chain running. Completed with measuring pump
can realize best lubrication and less lube oil waste.
- Fold down walkways will be provided.
- A fall protection device will be provided on the injector
- 100″gooseneck

9.0 Wellhead Equipment (Optional)
All the wellhead control equipments are J&N make.

9.1 BOP -4.06"
For 2” Coiled Tubing
Working Pressure:10,000 PSI
H2S service. All metals in contact with well fluids per NACE MR-01-75
Top End:4.06” 10,000 BX-155 Studded Flange
Lower End:4.06” 10,000 BX-155 Open Flange
Side Outlet:2.06” 10,000 BX-152 Studded Flange

9.2 Side Door Stripper- 4.06"
For 2” Coiled Tubing
Working Pressure:10,000 PSI
H2S service. All metals in contact with well fluids per NACE MR-01-75

9.2 Side Door Stripper- 4.06"
For 2” Coiled Tubing
Working Pressure:10,000 PSI
H2S service. All metals in contact with well fluids per NACE MR-01-75

10.0 Digital Data Acquisition Package (CTDASP)
- JK-CTDASP integrates standard Coiled Tubing Data Acquisition System with a
personal computer interface and is preloaded with report software and designed
for operator convenience and portable applications in harsh oil field environments.
- This new system provides customers with a single integrated solution where
previously a DAS suitcase, a laptop PC computer and related software programs
were required to perform the same job.

- This CTDASP system, with the software that is installed is capable of 
accepting/processing the following data from the unit mounted sensors :
Coil Tubing Depth and Speed
Circulating Pressure
Well head pressure
Fluid Pumping Rate/Total
Any other additional information

- Data Acquisition Software have the following features:
Local real time data and time indication
Real-time recording
Append and pause files during operation
Multiple channels input
User-defined X-Axis
Zoom and scroll functions on graph
Elapsed time and reset
Process real time/replay data

10.1 Software Function
- Display real time data by real time numerical value
- Display real time data by curve
- Download historical data in memory card
- Separate historical data into different data document according to time interval
- Display curve by horizontal and vertical ordinate, user can choose favorite one
- Check data easily: the real time data and historical data display by curve and data
- Dynamic loading historic data, reappear site job condition
- Easy for choosing coordinate axis
- Coordinate axis can be added and deleted, no effect for data curve
- Data curve can be adjusted to display and hide, easy for data analysis
- Coordinate axis can be zoomed and rolled, check data curve by rolling coordinate axis
- Supply command of Zoom to Fit for all coordinate axis
- In support of common printer, as well virtual PDF printer, can print curve and 
data into PDF Form

11.0 Painting
Procedure:
- All steel parts will be sand blasted to white metal
- Primer will be zinc rich
- Middle paint
- Surface will be industrial polyurethane paint
- The painting color will be confirmed by customer. the control cabin color is white

12.0 Documentations
- Operation and maintenance manual for skid mounted coiled tubing unit.
- OEM Operation and maintenance manual for diesel engine.
- Manufacturer’s installation operation and maintenance literature for all CTU’s major parts.
- Qualified certificate of equipment conformance to customer specifications.
- Qualified inspection certificate of equipment.

13.0 Tools and Spare Parts
Digital Multimeter 1 Pc
13 pieces electron tools kid 1 Set
Metric Combination Wrenches Kit (8-24mm ) 1 Set
English Combination Wrenches Kit(1/4"-7/8" ) 1 Set
Metric Inner Hexagon Spanner Kit(1.5-14mm) 1 Set
English Inner Hexagon Spanner Kit(1/16”-3/8”) 1 Set
Monkey Wrench(12”) 1 Pc
Special Handle Grease Gun 1 Pc
Hydraulic Oil Tank Return Oil Filter Element 1 Set
Hydraulic Oil Tank Suction Filter 1 Set
Engine Oil Filter 1 Set
Engine Diesel Filter 2 Set
Engine Air Filter 1 Set

14.0 Warranty
Warranty period for the unit is one year (from the day the unit arrived at the customer’s).

15.0 After sales services
We will provide After-Sales Service in the capacity of spare parts procurement.
In the event that parts become obsolete, We will assist in locating suitable replacements.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed

--------------------------------------------------------------------------------------------------------------------
Search words(for official use only) - 
CT Unit for Sale
2013 Built CTU for Sale
Trailer Mounted Coiled Tubing Unit
Coiled Tubing Unit 2013 Built for Sale
 
--------------------------------------------------------------------------------------------------------

Subsea baskets for Rent
Worldoils Marketplace
Subsea baskets for Rent

Worldrigs ID: WR2954

Subsea baskets for Rent
Equipment baskets for Rent


Description :

A wide range of baskets for many purposes:
Subsea baskets  
Equipment baskets  
Personnel baskets  
Garbage baskets

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Subsea baskets 11,5 x 4,1 x 3 m (LxWxH). Payload 36 ton for Rent
Subsea baskets 3,6 x 3,7 x 3 m (LxWxH). Payload 175 ton for Rent
Garbage basket for Rent
Personnel baskets for Rent
Subsea equipment baskets for Rent

-------------------------------------------------------------------------------------------------------
 
Speedstar 30K Drill Rig for Sale
Worldoils Marketplace
Speedstar 30K Drill Rig for Sale

Worldrigs ID: WR599

Speedstar 30K Drill Rig for Sale
1989 Built Speedstar 30K Drill Rig

Model : Speedstar
Manufacturer : 30K Drill Rig
Year : 1989
Condition : Used

Description

1989 Speedstar 30K Drill Rig
CAT 3408-C Diesel Deck Engine (2 years since installed and 2300 hours)
Sullair 900/350 CFM newly (rebuilt with 1 hour since)
18,000 lbs main winch
2000 lbs Sandline
Pipe Spinner
Mounted on a 1989 Ford L 9000
CAT 3406B Diesel Engine
Transmission: Road Ranger RTO 14708LL 8 Speed
Miles: 125,139
(20' x 3.5") & 600' ft of Drill Pipe
6 pipe non-mounted carosel
Mounted on a 1989 Ford L 9000 Truck

Location : USA

Price & terms : Please enquire using the email form below.       

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------
Search words (for official use only) :

Speedstar 30K Drill Rig for Sale
Used Drilling Rig Speedstar 30K Drill Rig
Speedstar 30K Drill Rig for Sale in USA
1989 Built Speedstar 30K Drill Rig for Sale
Land Drilling Rig - Speedstar 30K

-------------------------------------------------------------------------------------

 
Drilling Rig - Schramm T130 - For Sale
Worldoils Marketplace
Drilling Rig - Schramm T130 - For Sale

Worldrigs ID: WR846

Schramm T130 Drilling Rig for Sale
Drilling Rig - Schramm T130 - For Sale


Model : T130 Drill Rig
Manufacturer : Schramm
Condition : Used

Description :

Schramm T130 Drill Rig
Diesel Deck Engine
Mounted on a CCC Truck
Diesel Engine

Included as a package:
4-1/2" Bottle Neck X Hole Drill Pipe
6" Collars = 90 ft
All Subs needed to drill
Spare Motor
Spare Parts : Top Drive (Rebuilt no hours), New Spindle,
Bearings for top drive, Chive Crown
Pipe Racks with Catwalk (30 ft L X 5 ft W X 3-1/2 ft T)

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Schramm Drilling Rig for Sale
Used Schramm T130 Drilling Rig for Sale
Schramm T130 Drilling Rig for Sale in USA
C for Sale
Schramm Used Drilling Rig for Sale in USA

-------------------------------------------------------------------------------------------------------
   
1 2 3 4 5 6 7 8 9 10
  


Featured equipments for sale
 
4,400 BHP AHT for Sale
Worldoils Marketplace
4,400 BHP AHT for Sale

Worldrigs ID: WR1140

AHT Bollard Pull for Sale
4,400bhp Anchor Handling Tug
50MT Bollard Pull AHT for Sale
4,400 BHP AHT for Sale
2011 built AHT Vessel for Sale


Principal Particulars
Length Overall : 49.95 m
Length W.L. : 48.60 m
Breadth Mld : 12.60 m
Depth moulded : 5.75 m

Capacities
Tank Capacities with tanks 100% full, the approx.
capacities will be as follows :

Portable, total : 242 m³ (approx)
Fuel Oil, total : 500 m³ (approx)
L.O. Storage (M.E) : 2 x 6m³ (approx)
L.O Storage (Gensets) : 2 m³ (approx)

Hyd. Oil : 2 x 5 m³ (approx)
Steering Gear Oil : 1 m³ (approx)
Freezer/Chiller (Ship's use) : 2 x 5 m³ (approx)
Bilge Holding Tank : 5 m³ (approx)

Sewage Holding Tank : 5 m³ (approx)
Dirty Oil Tank : 5 m³ (approx)
Foam : 16 m³ (approx)
Dispersant : 19 m³ (approx)

Complement and Accommodation
3 x 4-berth cabin : 12 men
6 x 2-berth cabins : 12 men
3 x 1-berth cabins : 3 men
Total Complement : 27 men

Main Engines
Main engines to be 2 Cummins QSK 60, each developing an MCR
of 2200bhp at 1800 rpm, giving a total of about 4400 bhp continuous
power.

Life Saving Equipment
Life saving equipment is to be in accordance with Classification
and Solas requirements for an Ocean Going Vessel with a total
complement of 30 men.

The Life saving equipment shall include at least the following :

Liferafts :
4 inflatable liferafts to SOLAS requirement, each certified for
20 men are to be stowed in hinged type cradles for quick sideway
launching. All to be SOLAS Approved.

Lifebuoys :
8 lifebuoys of PVC or equal approved construction.4 lifebuoys with
90-Ft buoyancy line 4 lifebuoys with 90-Ft buoyancy line and
selfigniting electric lights 2 smoke signals of the latter). All to be
SOLAS approved. 1 lifebuoy to be positioned close to stern.

Lifejackets :
38 approved type lifejackets to be supplied and stowed  adjacent to
each berth. Including 2 Spare jackets. All to be SOLAS approved.

Pyrotechnics :
12 parachute distress rockets. 2 orange smoke signals each to have
120 seconds discharge time and be waterproof.

Rescue Boat :
1 Solas approved type rigid 6-men rescue Boat c/w 25BHP outboard
engine and approved gravity type davit is to be provided.

Line Throwing :
1 set Line Throwing Apparatus to meet with SOLAS requirement.

Retro Reflective :
Life Saving appliances are to be fitted with reflective tapes.

Boat Hooks :
2 boat hooks c/w approx. 8mm handle.

First Aid Kit : As per rules.

Fire-Fighting Equipment

Internal Fire-fighting :
Fire-fighting equipment is to meet Classification and relevant Flag state
Regulations. Generally all in accordance with the following :

Firemain :
A firemain and hydrants are to be installed, 6 on various deck levels and two in
engine room. 10M canvas fire hose c/w brass coupling and nozzle is to be
supplied and stowed alongside each hydrant in a protective box. All nozzles
to be dual jet/spay type.
International shore connection is to be fitted.

Fireman's Outfit :
2 complete sets (each contained in its own separate storage unit) of fireman's outfit are to be provided, comprising the following :

1 protective clothing
1 breathing apparatus
Oxygen tank and mask
1 fireman's axe
1 safety lamp of portable battery type
1 set of gloves and boots

External Fire-Fighting :
The following equipment are to be fitted for the vessel to comply with half Fi Fi
standards with water spray curtain.

Fire Pump :
2 unit seawater pump, one 1700 M3/Hr drive by main engine , other one 1200
M3/H drive by independent engine at 14 kg/cm2 to supply the fire monitor.

Fire Monitor :
2 units monitor at 1200 m3/hr each (Foam/ Water) Remote controlled.

Navigation and Communication Equipment
1 unit of DSC watch keeping receiver
1 Inmarsat “C” station with voice, fax, email facility
1 EPIRB
2 Radars, both X-band, meeting SOLAS & GMDSS, both Furuno 1510 with ARPA function
2 units of search and rescue radar transponder (SART)
1 unit of NAVTEX Receiver
1 MF/HF SSB
1 speed log system comprising transducer receiver, inter-phasing facility and
interconnecting cable shall be provided and installed

1 master gyro-compass fitted with 5 gyro repeaters positioned as follows :
- 1 centrally located in wheelhouse forward steering station as steering compass
- 1 auto pilot compatible and interfaced with gyro and steering compass
- 1 DGPS (Global Positioning System) navigator
- 3 sets walkie talkie, intrinsically safe, complete with spare battery and chargers.
SSB set (See separate clause)
- 2 outside of wheelhouse positioned clear of obstructions so as to allow bearings
to be taken, fitted with azimuthing ring capable of obtaining compass errors
- 1 magnetic compass, 7 inch reflector type c/w correction magnet, quadrant
balls and reflector tube and compass binnacle, Azimuth device.
- 1 echo-sounder, 0-036 ft deep range c/w repeater at aft manoeuvring station

Item not specified above but required by the relevant Authority are to be supplied by owner

Anchor Handling Fork, Shark Jaw
1 set electro-hydraulically operated anchor handling fork (hydraulic retractable shark jaws)
of approved make to be installed in centreline on main deck aft. The stopper to be able to
take 2” to 3” dia. Wire and 1-1/4” to 3” dia. Chain.

Towing Pins (200t SWL)
2 vertical hydraulic towing pins of approved make, retractable type, closed top to be installed
in the centreline of the main deck. The anchor handling pins to extend about 600mm above
main decklevel in the fully extended position. The pins are to be operable from wheelhouse
aft and locally.

Capstans
2 electro- hydraulic/hydraulic capstans each of 5 tonnes at 15m/min capacity to be installed
aft as shown on the General arrangement drawing light load speed to be 30m/min. Local
controls.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
----------------------------------------------------------------------------------------------------------------------------------
Search words (for official use only) - 
AHT Bollard Pull for Sale
4,400 BHP AHT Bollard Pull for Sale
Overall 49.95m long AHT for Sale
4,400bhp Anchor Handling Tug Supply Vessel
50mt BP AHT for Sale
AHT Vessel - 2011 built - for Sale
50MT Bollard Pull AHT for Sale
2011 built AHT Vessel
-------------------------------------------------------------------------------------------------------------------------------------

Available for selling

AHT Bollard Pull for Sale - 2011 built 4,400bhp
Contact Us
ID 1140
2000HP AC VFD Rig - Bomco
Worldoils Marketplace
2000HP AC VFD Rig - Bomco

Worldrigs ID: WR668

Bomco VFD AC New Rig For Sale
New Bomco VFD AC 2000HP rig for sale
BOMCO 2,000HP AC Drilling Rig


Classification :
Bomco, 2,000HP AC, drilling depth capacity to +/-23,000’

Drawworks :
Bomco Single Drum with AC motors (2) c/w Auto Driller

Mast :
Bomco 149’x 32’ base 1,000,000lbs. static hook load

Substructure :
Bomco Swing-Up ; Rotary table cap 1,000,000 lbs. Set back 495,000 lbs. 
- Two (2) Doghouse
- One (1) Drillers Cabin

Power System :
Four (4) Cat 3512B Engines 1,476 BHP ea.; SR4B 1750KVA Generators,
one (1) Aux. Generator

VFD House :
Power Circuit Breaker – 2000AF/1800AT, 600Volt, 3 pole, 65 kA IC, UL/CSA   
- Three(3) voltage-source inverters for three (3) mud pump AC motors (one 1200kW motor each mud pump)
- Two (2) voltage-source inverter for 800kw AC motor to drive Drawworks
- One (1) 800kw voltage-source inverter for 800kw AC motor to drive rotary table.
- One (1) Votage-source inventer for 42.5kw Auto-driller motor

Mud Pumps :
Three (3) 1,600HP triplex pumps, 8" x 6" x 100HP Charge Pumps

Mud System
2,000Bbls Active   
Three (3) DERRICK FLC 2000-3 panel Linear Motion Shakers,
One (1) each Derrick FLC 2000 Desander/Desilter
One (1) Vacuum D-Gasser
One (1) High Speed Centrifuges
Two (2) 8" x 6" x 100HP Mixing pumps & Hoppers
Thirteen (13) Agitators,
                                    
Drill Line :
6 x 19S + IWRC, EIPS, 1-1/2”, 1200m wire rope.(API 9A)

Rotary Table :
Bomco 37 ½” driven by DC Motor

Traveling Block & Hook : Bomco

Swivel : Bomco
     
BOP Handling System : One (1) set 

Air Compressor :
Two (2) 5.5 m³/min Srew type

Auxiliary Equipment :  
One (1) 500 Bbl. water tank w/ 2 x pumps
One (1) 750Bbl fuel tank w/ 2 x pumps
Three (3) air hoist 11,,000lbs
Two (2) Hydraulic Cathead
One (1) set each 350 ton and 500 ton Elevator Links
One (1) Drill Line Spooler, Hydraulic Drive

One (1) set CCTV Monitoring System
One (1) set MD Totco Drilling Instrumentation System
One (1) set HPU & Controls
One (1) Casing Stabbing board
One (1) set Catwalks & Pipe Racks
One (1) Drill Floor Tool Elevator. 

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


Land Drilling Rigs

 ----------------------------------------------------------------------
Search words (for official use only) - 
Bomco VFD AC New Rig
2000HP Land Rig Builders
Land Rig Sellers
2000HP Land AC Rig For Sale
Land Rig Brokers
New Bomco 2000HP AC Rig for sale
AC Rig Builders
Land Rig VFD AC Rig

---------------------------------------------------

Available for selling

Bomco VFD AC New Rig - 2000HP
Contact Us
ID 668
LTI 1000KP Drilling Rig
Worldoils Marketplace
LTI 1000KP Drilling Rig

Worldrigs ID: WR2635

LTI 1000KP Drilling Rig
Drilling Rig - LTI 1000KP 2000Hp - For Sale


Description :

General Description :
Make : Lee C Moore
Estimated Drilling Depth : 20,000ft
Estimated Rig Move Loads : 75
Estimated Camp Move Loads : 20
Rated HP : 2000

Mast :
Height : 147.00ft
Static Hook Load Capacity : 1,000,000lb
Mast Racking Capacity : 20,800ft

Substructure :
Style : Parallelogram
Height : 30.00 ft
Clear Height : 25.25 ft
Casing Capacity : 1,000,000lb
Maximum Setback Load : 600,00lbs

Drawworks :
Make : LeTourneau                                                                    
Model : LDW 1000k
Power Rating :2000hp
Input Power :
2 ea Oilfield
Electric
Marine Inc
TT 1500
Drilling Line Size : 1½"
Brake Type - Band or Disk : Disk

Top Drive / Power Swivel :
No Top Drive

Swivel :
No Swivel

Rotary Table :
Make :
LeTourneau
LW-375
Table Opening : 37 ½"
Maximum Load Rating : 650 Ton

Power Generation :
No Engines
No Generators                                             
SCR / VFD / DC /DC : VFD Rig

Mud System :
Mud Pumps :
1 ea LeTourneau
WH 1612                                          
Power Rating :
1600 hp
@ 120 spm                                         
Pressure Rating : 7,500 psi                                   
Active Mud Volume : 590 bbls
Reserve Mud Volume : 460bbls                                                                             
Shale Shakers :
3 ea Axiom
Process Ltd.                     
Mud Cleaner : N /A
Desander : N /A
Desilter : N /A
Centrifuge : N /A

Well Control :
Annular :
135/8" 5,000 psi,
Shaffer                                                 
Choke Manifold :
4 1/16" x 31/16
10,000 psi,
Cameron                                
BOP Closing Unit :
Consolidated
Pressure
Controls
8 stations
3,000 psi

Enhancements :
Power Slip Frame :
Access Oil
Tools 26-100PD

Location : Australia

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


------------------------------------------------------------------------------------
Search words (for official use only) :          
2000Hp LTI 1000KP Drilling Rig for Sale
20,000 ft Drilling Depth Land Drilling Rig for Sale
Land Drilling Rig - 2000 HP - For Sale
LTI 1000KP Used Drilling Rig for Sale
LTI 1000KP Drilling Rig - 2000Hp for Sale in Australia

-----------------------------------------------------------------------------------
Available for selling

LTI 1000KP Drilling Rig - 2000Hp - For Sale
Contact Us
ID 2635
Ingersoll-Rand DM25SP, Rotary Blast hole Drill Rig
Worldoils Marketplace
Ingersoll-Rand DM25SP, Rotary Blast hole Drill Rig

Worldrigs ID: WR1209

Ingersoll-Rand DM25SP, Rotary Blast hole Drill Rig for sale
Used Drilling Rig for sale in Australia
Drilling Rig - Ingersoll-Rand DM25SP - 1996 Built

Model : DM25SP, Rotary Blast hole Drill Rig
Manufacturer : Ingersoll-Rand
Year : 1996
Condition : Used

Description :

1996 Ingersoll-Rand DM25SP, Rotary Blast hole Drill Rig
Powered by Cummins N14 Diesel Engine @ 450 HP
Down The Hole (DTH) Single Pass
IR HR2 - 800 cfm / 350 psi Air Compressor
Starts and Moves but not operational
operating weight of 30,000kg
5,000 lb pull down and
Dual pole battery isolators lockable
Ground level emergency stops
Heldweld safe access steps (retractable)
600mm cab access walkways etc.
MDG 15 compliances
Location : Australia

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

Water Well Rigs          Water Well Rigs

---------------------------------------------------------------------------------------------------------------------------
Search words(for official use only) :
Ingersoll-Rand DM25SP Drilling Rig for sale
Used Drilling Rig for sale in Australia
Used 1996 built Rotary Blast hole Drilling Rig
Ingersoll-Rand DM25SP, Rotary Blast hole Drill Rig
Land Drilling Rig for Sale - 1996 built
Used Rotary Blast hole Dril for sale in Australia 
Ingersoll-Rand Rotary Blast hole Drill Rig
Ingersoll-Rand DM25SP for Sale - Drilling Rig
Drilling Rig - Ingersoll-Rand DM25SP - 1996 Built
-------------------------------------------------------------------------------------------------------

Available for selling

Ingersoll-Rand DM25SP, Rotary Blast hole Drill Rig - 1996 Built for Sale
Contact Us
ID 1209
7500bhp DP2 PSV for Sale
Worldoils Marketplace
7500bhp DP2 PSV for Sale

Worldrigs ID: WR1071

DP2 PSV FiFi 1 for sale
7500bhp DP2 ROV Support and Platform Supply Vessel for
DP2 ROV Support and Platform Supply Vessel for Sale - 7500bhp
2007 built DP2 ROV Support and Platform Supply Vessel for Sale

General
Built : 2007
Classification :
DNV +1A1 Supply Vessel, FiFi 1,
OILREC, EO, TMON, DYNPOS AUTR
NV

Dimensions
LOA : 72m
Breadth (moulded) : 16m
Draft (max) : 5.85m
GRT : 2305T
NRT : 848T
Deadweight : c.3,184T

Machinery
Main Engines : 2 x 3,741BHP
Thrusters Bow : 2 x 885BHP
Thrusters Stern : 2 x 800BHP
Shaft Altenators : 2 x 1800kW
Aux Generators : 2 x 375kVA + 1 x 150kVA
Rudders : 2 Rolls Royce High Lift
Propellers : 2 x CPP
Deck Crane : 1 x 5T @ 16m
Tugger Winch : 2 x 10T
Capstans : 2 x 8T

Cargo Capacity
Deck Area : 640sqm (47m x 13.6m)
Deck Load : 1,550T
Fuel Oil : 931cbm @ 100%
Potable Water : 800cbm @ 100%
Drill Water : 1,255cbm @ 100%
Oil Based Mud* : 6,304bbls @ 100%
Base Oil : 689bbls @ 100%
Brine* : 6,304bbls @ 100%
Oil Recovery : 800cbm (8 tanks)
Dry Bulk : 11,300cuft @ 100% (80psi)

*Mud/Brine tanks (S.G. 2.5)
10 dual purpose mud / brine tanks.
Can be split 6/4; mud /brine with total
segregation.

Agitators
Electric agitators in all mud/brine tanks.

Tank Washing
Toftejorg fixed tank cleaning system in
mud/brine tanks. Hot water and chemical
dosing applications.

Discharge Rates
Fuel : 250cbm/hr @ 90m hd
Pot Water : 200cbm/hr @ 90m hd
Oil Based Mud : 2 x 70cbm/hr @ 90m hd
Base Oil : 90cbm/hr @ 90m hd
Brine : 75cbm/hr @ 90m hd
Cement : 80T/hr @ 90m hd
Barytes : 60T/hr @ 90m hd
Bentonite : 100T/hr @ 90m hd
Drill Water : 150cbm/hr @ 90m hd

Fuel Consumptions
c. 14.5kn @ c. 25t / 24hrs
c. 13kn @ c. 15.9t / 24hrs
c. 11kn @ c. 12.3t / 24hrs
c. 9kn @ c. 9.8t / 24hrs

Navigation Equipment
1 x Sperry Bridgemaster 10cm
ARPA Radar
1 x Sperry Bridgemaster 3cm Radar
1 x Leica GPS Satellite Navigator
3 x Sperry Navigat Gyro Compass
1 x Sperry Navipilot Autopilot
1 x Sailor AIS
1 x Sperry Echosounder
1 x Sperry Naviknot Speed Log
1 x JRC Weather Fax

Communication Equipment
1 x Inmarsat F / 2 x Inmarsat C
1 x Internal Intercom System
Radio plant according to GMDSS
requirements
4 x Motorola GP 340 Atex
3 x VHF’s (Bridge)
2 x Sailor VHF RT 4722
1 x Sailor VHF C 4900
External communication according
to GMDSS – 3 x Sailor SP 3300
1 x Sailor 406 MHz EPIRB

Fire Fighting
FiFi 1 with self drenching system
2 x 1800cbm/hr pumps
2 x 1200cbm/hr monitors
(water/foam)

Accommodation
5 x 1 Man
22 x 2 Man
Max. 26 berths available for charterers
personnel during DP operations

DP System
Konsberg – Simrad SDP-21 Green DPS (DP II)
References :
1 x HiPAP 500 Acoustic Positioning System
1 x Fanbeam MK4 laser system
1 x DGPS DPS-200 with IALA receiver
1 x DGPS DPS-100

Manoeuvring Equipment
1 x Poscon Joystick (portable)

Additional Features
Removable Wheelhouse for transiting low air draft areas
Minimum air draft : 14.4m
Deck Power Outlets : 2 x 500Amp Outlets (440v)
Reefer sockets : 12 x 110v / 32Amp
Mob Boat : Norsafe Midget 5.0
Dispersant Spraying : 2 x 10m stainless steel booms
Dispersant Storage : 9.8cbm
Oil Recovery :
800cbm @ 450cbm/hr discharge
Power pack for oil rec. equipment
Removable bulwarks : 1 x 5m (Port side) 1 x 11m (Stern)

Tank : Fuel (11+2)
Fuel Oil in Cubic Metres -
105.3
119.9
65.9
(x 2)
47.1
54.8
(x 2)
49.1
134.2
(x 2)
41.7
(x 2)
16.2

Tank : Freshwater (6+2)
Potable Water in Cubic Metres -
113.7
104.3
58.7
33.4 (x 2)
79.2
173.1
189.9

Drill Water in Cubic Metres -
173.1
189.9

Tank : Drill Water (11)
Drill Water in Cubic Metres -
69.5
50.7
97.7
(x 2)
100.7 (x 2)
112.4
166.5
96.2

Tank : Dual Purpose Mud/Brine (6+4)* in barrels

634
634
634
634
634
634
614.5
614.5
635.3
635.3

Tank : Mud (6) in barrels

Mud -
634
634
634
634
634
634

Tank : Brine (4) in barrels
614.5
614.5
635.3
635.3

Tank : Base Oil (2) in barrels

344.7
344.7

Total :
Fuel Oil (Cubic Metres) : 931
Portable Water (Cubic Metres) : 786
Drill Water (Cubic Metres) : 1,255
DP Mud/Brine (in barrels) : 6,304
Mud (in barrels) : 3,804
Brine (in barrels) : 2,500
Base Oil (in barrels) : 689

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
------------------------------------------------------------------------------
Search words (for official use only) :
DP2 PSV FiFi 1 for sale
7500bhp Platform Supply Vessel for Sale
PSV for sale - 7500bhp
2007 built Platform Supply Vessel
PSV-DPII FiFi 1 for Sale
PSV for Sale - 7500bhp - 2007 built
Platform Supply Vessel for Sale

------------------------------------------------------------------------------

Available for selling

DP2 PSV FiFi 1 - 7500bhp for Sale
Contact Us
ID 1071
Modified 1500hp Land Drilling Rig in Kazakhstan - for sale
Worldoils Marketplace
Modified 1500hp Land Drilling Rig in Kazakhstan - for sale

Worldrigs ID: WR843

Land Drilling Rig for sale
1500hp Land Drilling Rig - Used and Modified
1992 Modified Land Drilling Rig for Sale  in Kazakhstan


Year Modified : 1992

Rated Drilling Depth
5 in. Drill Pipe : 18,000 ft (5,486 m)
4-1/2 in. Drill Pipe : 21,000 ft (6,400 m)

Mast
Make, Type : Derrick Structures Int’l, cantilever
Height : 142 ft (43.2 m)
Max. Hookload : 1 million lbs
Racking Capacity :
5 in. drill pipe, 93 ft. stand – 18,000 ft (5,486 m)

Drawworks
Make : Continental Emsco C-1 Type II
Rated Input : 1,500 hp (1,119 kW)
Input Power :
Two GE-752 DC tractionmotors, each rated 1,000 hp (746 kW)
Drilling Line : 1-3/8 in. (34.9 mm)

Traveling Equipment
Traveling Block : Continental Emsco
Max. Load : 1 million lbs
Swivel : Continental Emsco LB 400
Max. Load : 800,000 lbs

Substructure
Make, Type : Derrick Service Int’l, box-on-box
Clear Working Height : 30 ft (9.1 m)
Setback Load : 650,000 lbs

Rotary Equipment
Top Drive : Tesco TD-500HS, 500 ton
Input Power :
One Caterpillar D-3412, rated 750 hp (559 kW)
Rotary Table :
Continental Emsco T-2750; 27-1/2 in. (698.5 mm)
Input Power : Chain-driven by drawworks
Static Load Rating : 1.3 million lbs

BOP System
Annular Preventer :
One 21-1/4 in. Hydril MSP 2,000 psi
One 13-5/8 in. Shaffer 5,000 psi
Ram Preventers :
Two 21-1/4 in. Shaffer 5,000 psi single rams
One 13 5/8 in. Cameron 10,000 psi double ram
One 13 5/8 in. Cameron 10,000 psi single ram

Gensets
Engines :
Five Caterpillar D-398 engines; 810 hp (604 kW)
each @ 1,200 rpm
Generators :
Three Kato 800 kW (1,000 kVA) generators
Two Kato 1030 kW (1,300 kVA) generators

Power Distribution
Gen. Control : Five
SCR : Three Ross Hill Model 1400 SCR bays
MCC : 600 V, 480 V, 208 V, 110 V

Mud Pumps
Pumps :
Two Continental Emsco FB-1300 triplex pumps,
each rated 1,300 hp (969 kW)
One Continental Emsco FB-1600 triplex pump,
rated 1,600 hp (1,193 kW)
Input Power :
Each pump driven by two (2) GE 752 traction motors,
each rated 800 hp (596 kW)

Mud Handling/Solids Control
Active Mud System : 1,210 bbls (192 cbm)
Shale Shakers :
Four Derrick high-speed mud cleaners (500 gpm)
Degasser : Swaco vacuum-type (900 gpm)

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
--------------------------------------------------------------------------------------
Search words(for official use only) :
Land Drilling Rig For Sale 
Modified Land Drilling Rig For Sale - 1500hp
Used 1500 HP Drilling Rig for Sale
Land Drilling Rig for sale in Kazakhstan

-------------------------------------------------------------------------------------

Available for selling

Land Drilling Rig - 1500hp for Sale
Contact Us
ID 843
Over 89m Floating Dock for Sale
Worldoils Marketplace
Over 89m Floating Dock for Sale

Worldrigs ID: WR2092

Dry Dock Designs
Newbuild Floating Docks for Sale


Main Particulars
Length overall : 89.90m
Length of pontoon : 89.90
Length over keel blocks : 89.90
Length of sidewalls : 80.00m
Width between outside walls : 32.00m
Width between inside walls : 26.00m
Width between fenders : 25.00m
Width of sidewalls : 3.00m

Distance from upper deck of baseline : 16.00m
Distance from safety dec to baseline : 13.00m
Depth of pontoon at centre line : 3.00m
Depth of pontoon at sidewalls : 3.00m
Max. immersion draft : 11.00m
Water depth above keel blocks when max. immersion draft : 6.60m
Working draft : 2.70m
Height of keel blocks : 1.40m
Space of keel blocks : 2.00 / 1.00m

Frame space : 0.50 / 0.45m
Camber of upper deck : 0.00m
Camber of work deck : 0.00m
Lifting capacity : 3200t
Main ballast pump : 1000cbm/h x 4 sets
Lifting time for vessel of 3200t weight : abt. 120min.
Crane ; 3t x 30m x 2 sets

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


-----------------------------------------------------------------
Search words (for official use only) :
Over 89m Floating Dock for Sale
Floating Dock Designs
Dry Dock Designs
Newbuild Floating Docks for Sale

-----------------------------------------------------------------
Available for selling

Newbuild Floating Docks for Sale
Contact Us
ID 2092
Trailer Mounted Drilling Rig for Sale
Worldoils Marketplace
Trailer Mounted Drilling Rig for Sale

Worldrigs ID: WR1436

Trailer Mounted Drilling Rig for Sale
1000 hp Trailer Mounted Drilling Rig
New Built Mechanical Drilling Rigs for Sale

Description

I. Hoisting Equipment

i. Mobile drilling trailer mounted type 1000HP, with single drum drawworks, two
Detroit series 60 14.0 liter engines with two Allison S6610H transmissions with
hydraulic torque converter. Mast height 118 ft., load capacity-425,000 lbs. (210 ton API).
Rig mounted on a 4-axle chassis.

A. Group I. Basic Rig

a. Drawworks – OEM-1000
i. Disc Brake System – Two (2) 60” O.D. x 4” Thick water cooled disc: Four (4)
brake calipers w/park feature, each caliper can develop 48,000 ft-lbs @ 100 psi.
Maximum 900 rpm calipers have a park feature rated @ 28,000 ft-lbs each. Manufacturer = Kobelt
ii. Air Clutch – Two (2) 30” diameter friction disc, slip torque rating 54,500 ft-lbs @ 100 psi,
maximum 760 rpm, 1664 sq in lining area. Manufacturer = Witchita.
iii. Drum 24” O.D. x 40” length with Lebus groove system
iv. Centralized Lubrication System
v. Drill line Diameter-1 1/8”
vi. Drive Chain - Four-strand, 1 ½” pitch
vii. Total Disc Brake Area - 1680 sq. inches

b. Auxilary Brake
i. Air Operated: Water Cooled Disc with copper alloy wear plates, mounted to frame,
coupled directly to drum shaft. Two (2) 36” Disc rated @75,000 ft-lbs @100 psi
maximum 640 rpm.
ii. Size-236 or equal
iii. Maximum Pressure - 100 psi
iv. RPM-640
v. Direct Coupled Drum shaft.
c. Combined Gear Box
i. Combined right angle drawworks drive drop box with one output shaft for rotary drive
and one output shaft (unused) for additional components.
1. One input shaft with 1810 drive flange.
2. Top right shaft - drawworks drive, air engaged 1.0 to 1 ratio keyed shaft
3. Top lower shaft - rotary drive, air engaged 1.1489 to 1 reduction ratio keyed shaft.
4. Bottom lower shaft – Future or additional components, opposite top lower shaft,
air engaged, 0.9787 to 1 ratio (1.0217 to 1 ratio increasing), 1810 drive flange.
ii. Gear type lubrication pump mounted intermediate shaft provides positive lubrication
to bearings.
d. OEM 118’-0” x 425,000# Telescoping Mast - The 118ft., mast provides is a telescoping
design, manufactured in accordance with API and Drilling Structures Int’l Inc.’s strict
quality control processes.
The mast includes an automatically deployed racking board.
i. A telescoping derrick with open face derrick design, manufactured to API 4-F
specifications. The open face design utilizes structural steel construction, which allows
for maximum block clearance. Derrick includes a ladder from rig floor to crown and a
block cradle with chain & hook for securing block during transport.
ii. Specifications
Mast Height : 118’
No. of Lines to Block - 8 or 10
API Operating Hook Load
- 8-Lines 340,000 lbs.
- 10-Lines 425,000 lbs.
Drilling Line Size : 1-1/8 in.
Racking Board Height - 55 ft., 58 ft., 70 ft.
Racking Board Capacity 5 in. Drill Pipe - 12,400 ft.
iii. Base Section
a. A-leg style base section hinged to carrier frame. (2) Turnbuckles attached from
bottom of derrick base to carrier frame allow for mast angle adjustment.The well-side derrick
legs have manual screw jacks.
iv. Lower Section
a. 6 in x 6 in x 3/4 in angle main legs, with 6 in x 4 in x 3/8 in rectangular tubing
“back” braces. Lower section of mast hinges to top of derrick base and rests on headache
rack during transport.
v. Upper Section
a. Angle construction. 6 in x 6 in x ¾” upper legs, with 3 in x 3 in x 3/8 in “back” braces. Upper
section rests inside lower section until mast is raised. Upper section then telescopes
hydraulically upward from lower section and locks in place with automatic latching pins.

vi. Crown Block
a. Crown block is set up for a 8 or 10 line string-up. Crown sheaves are grooved for 1-1/8 in.
Wire line. All sheaves are mounted on tapered roller bearings with grease certs for ease
of maintenance.
b. Crown includes: (1) one 30 in fast line sheave, and (4) four 24 in crossover sheaves.
vii. Racking Board
a. The mast includes an all welded racking board. The racking board automatically deploys
as the mast is extended.

viii. Derrick Raising System
a. The derrick is designed to utilize two, 72”x 9” x 3-stage, double acting raising rams and
one 50’ x 7” single-stage telescoping cylinder.
ix. Guylines
a. Derrick includes (2) load guys from the crown to carrier and (1) set of wind guys that meet or
exceed API specifications.
e. Hydraulic Catworks
a. Hydraulic break out cylinder for breaking out pipe connections, 4 ft. stroke,
maximum pull load 20,000 lbs. Installed on the mast. Includes cable, roller guides and
hydraulic piping.
b.Hydraulic make up cylinder for making up pipe connections, 4 ft. stroke, maximum pull
load 20,000 lbs. Installed on the mast. Includes cable, roller guides and hydraulic piping.
c. Controls are located at the operator’s console
f. Traveling Block Limit Switch (Crown Block Saver)
a. Safety device for limiting traveling block raising. Installed at the main drum to activate the
main brake when traveling block is up to a pre-determined height.

g. Deadline Anchor
a. Dead line anchor to be used with compression type weight sensor. Drum type, mounted on
carrier frame in front of drawworks frame.
h. Diesel Engine
a. Two Detroit series 60 - 14.0L engines rated at 600 BHP each@ 2100 RPM’s, 6 cylinders
(inline) complete with DDC electronic control system.
b. Includes: Radiator, Heavy Duty Blower, 24V starter and alternator, variable speed governor,
full instrumentation (ignition switch, ddr connector, electic throttle, electronic display module),
two (2) 12v batteries and spark arrestor muffler.
c. Specifications: 600 BHP @ 2100 RPM, 1650 lbs/ft @ 1100 RPM
i. Transmission
a. 5 speed (6th gear locked out), automatic, Allison S6610H or equal w/torque converter,
oil cooler. Dual air/hydraulic operation. Max. capacity 850 HP, 2500 RPM, 2300 ft-lbs input.
j. Compound Gear Box
a. Compound gear box, dual input, single output, may be drive with one or both engines.
b. Two input shafts, air engaged, 1810 drive flange (engagement of either input or a
combination of both)
c. Single output, 1810 drive flange, ration 1.0271 to 1 to combination gear box.
d. Gear type lubrication pump. Mounted to output shaft provides positive lubrication to bearing.
k. Power Take-off
a. Chelsea 852 XB or equal, Used for hydraulic pump drive, mounted on transmission,
95 HP @ 1000 rpm output.
l. Hydraulic System
a. Two hydraulic gear pumps, one 500 gallon hydraulic tanks with containment pan, filters,
heat exchanger and sight glass. Capable of producing 50 gpm @ 3000 psi, pressure return and
circulation filters with visual indicator, 3000 watts portable generator, inline flow meter,
system safety release valve, circuit breaker panel for heater/valve bank, operator panel
with selector switch.
b. Custom built valve bank, 15 station manifold, prewired control panel and hand held remote
with the following functions:
i. Mast lower/raise
ii. Mast telescope up/down
iii. Two (2) hydraulic pilot operated directional valve and joystick for winches.
iv. Six (6) leveling jacks.
v. D.S. sub raise/lower
vi. ODS sub raise/lower
vii. Make up/Brake out tong cylinders with remote torque adjustment
viii. Flow dividers for mast raise and sub cylinders
ix. Electrical control panel, remote controls and function switches for above
x. Velocity fuses on all cylinders for fall protection.
m. Air System
a. Air system with on (1) 60 gallon receiver to provide air to main air line and brake system.
Includes air lines, control valves, pressure gauges.
n. Air Compressor
a. Air compressors with direct drive, mounted on engine.
b. Reciprocal type, 28 CFM capacity
o. Operator’s Controls
a. Operator’s console to include the following controls and instrumentation:
i. Main drum brake lever
ii. Main drum clutch controls
iii. Two engine throttles – One (1) hand and one (1) foot
iv. Shift levers for two 4-speed transmissions
v. Two emergency engine shut downs
vi. Hydraulic pump controls
vii. Two mud pump engine regulators
viii. Mud pump engine emergency shut down
ix. Mud pump clutch controls
x. Instrumentation Air Pressure Gauge
b. All air operated controls are located in the central part of the console and have identifying tags.
Console is located to provide good visibility of traveling block, work floor and racking board.
p. Engine Emergency Shut Down
a. One engine emergency shut down valve for emergency engine stop. Located at the
operator’s console.
q. Trailer Mounted
a. A heavy duty 4-axle trailer with air suspension and 109,000 lb. total capacity.
b. All lights and brakes are equipped for attachment to the truck
c. Spring brake chambers for safety.
r. Tires (12.00 x 22.5, Pirelli Radial) 16 each
a. All tires, disc wheels, 16 tires mounted as dual. Tire rating 109,000 lbs. total, all tires inflated to 100 psi.
s. Suspensions
a. One (1) two axle, single point bogey at rear.
b. Two single axles with air bags, air can be dumped for backing into position
c. All axles are 12.5 metric ton capacity.
t. Four Pedestals for Hydraulic Jacks
a. Pedestals under front jack for rig stability. Four pedestals require. There are to be six jacks for
leveling the rig.
u. Six Hydraulic Jacks
a. Six hydraulic leveling jacks to take off the load from the axle and provide horizontal position of the
rig during operation. Each jack is operated by its own controls and is equipped with screw with
thrust nut,which allows relieving hydraulic pressure from he jacks during rig operation. Controls are
located at the mast supports.
v. Fuel Tank
a. Mounted on the side of the chassis
w. Auxiliary Hydraulic Winch (2 winches using one for spare)
a. Braden or equal hydraulic winch with 12,000 lbs. pull load at the first layer, 336 fpm @ 65 GPM
and 2400 psi.
b. Hydraulic brake and spooler
c. Sheave is mounted on the crown

x. Rotary Table Drive
a. One rotary table drive with driveshaft and two air clutches(one for rotary on and off, second for emergency
shut down)
b. Controls are located at the operator’s console
y. Rotary Table Drive Chain Gear Box
a. Includes three oil-greased shafts inside full-length guard, complete with sprockets, flanges, chains and
chain gear-box with one shaft to connect to rotary table. One lower section mounted on the trailer, one upper
section mounted on the sub and one flanged driveline between.
z. Drill Line
a. 1 1/8” OD drill line, 6 x19s IWRC, 3000 feet
Group II - Substructure and Assessories
A. OEM Hydraulically Telescoping 17-425 Substructure
1) Material and labor to fabricate one (1) OEM hydraulic telescoping 17-425 substructure 
as per the following:
i. Hydraulic Telescoping Substructure with:
- 425,000# Rotary beams
- 300,000# Setback.
- Clear height under rotary beams = 14’
- Transportation height 12’-6”
- Base dimensions 45’L x 12’-6”W
- Working floor dimensions 20’ x 26’
- Rathole and mouse hole locations
- Two tong backup posts
- Removable braces in cellar area.
- Provisions for attaching mast support beam.
- Supply and installation of four (4) hydraulic scoping cylinders.
- Pull out post for guy wires to front of mast.
- Removable flooring around rotary table area.
- B.O.P. Dolly and tracking.
The above substructure to be fabricated under A.P.I. 4F guidelines. Upon completion, 
substructure to be tagged with OEM A.P.I. 4F
B. Mud Boat
i. Material and labor to fabricate one (1) mud boat. Mud boat complete with:
1. Supports under jacks on carrier.
2. Pipe guides for tires
3. Pin connections to mast support beam.
4. Loading hitches on one end
C. Mast Support Beam/Brake Water Tank/Trip Tank Combo
i. Material and labor to fabricate one (1) mast support beam/trip tank/brake water 
tank combination. Combination complete with:
1. Brake Water Tank - Material and labor to fabricate one (1) break water tank. Tank to be
enclosed for rig up winterization.
a. Tank to have the following:
i. Tank bottoms to be 3/8” plate.
ii. Tanks constructed with ¼” v-crimp.
iii. Tank rims to be 4” square tubing.
iv. Access ladder
v. Man way
vi. Tong buckets, guides, and safety cage.
vii. Supply and installation of:
1. Two (2) 2 x 3 centrifugal pumps
2. Heat exchanger
2. Trip Tank – Material and labor to fabricate one (1) trip tank. Tank to be enclosed for
rig up winterization.
a. Tank to have the following:
i. Tank bottoms to be 3/8” plate.
ii. Tanks constructed with ¼” v-crimp.
iii. Tank rims to be 4” square tubing.
iv. Access ladder
v. Man way
vi. Tong buckets, guides, and safety cage.
vii. Provisions to mount:
1. One (1) 2 x 3 centrifugal pumps
3. Mast Support Beam – Material and labor to fabricate one (1) three runner mast support beam.
a. Support beam complete with:
i. Supports for carrier jacks and bottom base of mast.
ii. Loading hitches on both ends for tailboarding.
D. Rig Floor Stairways– All stairs to meet OSHA standards with no slip grip strut stair treads.
i. Three (3) 17’-0” stairway from substructure floor to ground level. Stairs to be built on
a 45-degree angle.
ii. One (1) 9’-6” stairway from top of the substructure to top of mud tank. Stairs to be built on
a 45 degree angle.
E. V-Door Ramp- Ramp to be fabricated to work with a 17-0” floor height substructure and
an 18” catwalk. Ramp to be fabricated with ½” plate and 3” pipe guides.
F. Catwalk– One 50’ x 5’-0” x 18” catwalk with snatch post mounted on one end.
G. Doghouse- House to be fabricated on a three-runner oilfield type skid with loading hitches on
both ends for tailboarding. House to have checker plated flooring, v-crimped wall
construction, and an arched type roof. House complete with the following:
1. 4’-0” porch on one ends
2. 2’-0” walkway on the back side of the doghouse running to full length.
3. Handrails around house perimeter.
4. One sliding doorway to rig side.
5. One swing type doorways on both ends with windows built in.
6. Two (2) windows on the back side wall
7. Knowledge box
8. Three compartment workbench.
Group III - Prime Mover Drive
A. Lighting System–Heavy Duty explosion proof Fluorescent and Mercury Vapor
Lightning System designed to use with Mast and Substructure, Mud System, complete
with Plug, Receptacles, Cable, Cable Clamps and all necessary Leads and fitting. Lighting
System consist of: Mast and Racking Platform, Substructure Lighting, Mud Tanks and
Mud Pumps, and Utility House, including Battery emergency light at Driller’s console
certified for Class 1 Division 2.
B. Engine/Generator/Part/Change Package
a. Utility House - “New” - Material and labor to fabricate one (1) utility house. House (43’x 12’ x 9’)
to be constructed on an oilfield type skid (45’x 12’x 18”) with loading hitches on both
ends for tailboarding. Top of skid covered with ¼” checker plate.
i. Parts/change house to be complete with:
1. Twenty (20) lockers.
2. Changing bench near lockers.
3. Two sets of shelves on each wall running 8’-0”.
4. One (1) bench on each wall. Bench compartments to be 5’-0” with folding bench.
Two compartments to have ventilation to the outside for paint storage.
ii. Generator house complete with:
1 One (1) 8’-0” sliding door on side of the generator location
2. Provisions for mounting one (1) electrical plug panel.
3. Radiator end of skid left open.
4. Skid designed for generator tie downs to be mounted on cross beams of skid for safety.
b. Generator – Two (2) Detroit 60 Series 14L.
c. Electrical Specifications
i. Item 1 – Clarification
1. Prime mover specifications were not provided; IEC Systems assumes the engine
and generator sizes as listed in this proposal.
2. The generator house will be designed to accommodate the “Three Tank Drilling
Rig Standard” and thus be interchangeable with all rigs that meet the standard
3. IEC System proposal is based on performing the installation in Houston, Texas.
All components listed below will be installed and tested
4. Customer will furnish the voltage regulator and voltage rheostat
ii. Item 2 – Generator Houston Electrical System For a Mechanical Rig
1. Generator House 480 VAC Switchboard
a. 1 ea - A/C Generator Control Panel by IEC Systems for the control of two (2),
450 kW, 480 volt, 3 phase, 4-wire, 60 Hertz, A/C generators.
b. Switchgear to contain full instrumentation and will not be designed for full
parallel operation of generators.
c. Switchboard will be NEMA Type 1 enclosure with ASA #61 gray enamel finish,
designed to meet NEMA and OSHA specifications.
d. All nameplates will be constructed of plastic plates, black on white for names
and red on white for warnings.

Generator controls mounted in the switchgear will consist of:
2 - Generator Main Circuit Breakers (Gen PWR)
2 - Generator "Power Available" Indicating Lights
2 - Voltmeters
2 - Voltmeter Switches
2 - Ammeters
2 - Ammeter Switches
2 - Frequency Meters
2 - Reverse Power Relays
1 - Ground Detection System
2 - Governor Control Switches
2 - Wire to Customer Furnished Voltage Regulators
2 - Wire to Customer Furnished Voltage Rheostats
1 - Lot Current Transformers, Potential Transformers, Fuse Blocks, Fuses,
Buss Bar, Switchboard Wiring, and related equipment
Switchboard will be fully assembled, wired, and shop tested.
2. Generator House 480V Motor Control Center (MCC)
a. 1 ea - 480 Volt, 3-phase, 60 Hertz A/C Motor Control Center, equipped with braced horizontal
and vertical bus
b. Enclosure will be NEMA Type 1 with front only access
c. Motor starters will be combination, full voltage- non-reversing with 3-pole overload
blocks, heaters, control power transformer, operating handle, fuses and start/stop
controls in cover with red "RUN" indicating lights
d. 480V MCC Motor Starters
i. Five (5) Size 4 Starters for:
1 ea 60 HP Mud Mixer 1
1 ea 60 HP Mud Mixer 2
1 ea 60 HP Desander
1 ea 60 HP Desilter
1 ea Spare
ii. One (1) Size 3 Starter for:
1 ea 40 HP Trip Tank

iii.Five (5) Size 2 Starters for:
1 ea 20 HP Drill Water 1
1 ea 20 HP Drill Water 2
1 ea 25 HP Brake Cooling Pump 1
1 ea 25 HP Brake Cooling Pump 2
1 ea Spare
iv. 480 V MCC Motor Feeder Circuit Breaker
1. 1 ea - 150 AMP 3 Pole Circuit Breaker for Camp Feeder
3. Generator House 480V Distribution Panel Boards
a. 1 ea - 480V POWER DISTRIBUTION PANEL BOARD (P1)
i. 480V, 3-Phase, 3-Wire
ii. NEMA 1 Enclosure
iii. 600A MLO with Feed-Thru Lugs
iv. 36 CKT with branch Circuit Breakers for the following loads:
a. 1 ea - 100A/3-Phase CB for 75 KVA Lighting Transformer
b. 1 ea - 60A/3-Phase CB for BOP Accumulator (30 HP)
c. 1 ea - 60A/3-Phase CB for Spare
d. 1 ea - 30A/3-Phase CB for Agitators 1, 2 Feeder (10 HP each)
e. 1 ea - 30A/3-Phase CB for BOP House Heater (15 kW)
f. 1 ea - 30A/3-Phase CB for Change House Heater (15 kW)
g. 1 ea - 15A/3-Phase CB for Liner Washer 1 (3 HP)
h. 1 ea - 15A/3-Phase CB for Liner Washer 2 (3 HP)
i. 1 ea - 20A/3-Phase CB for Fuel Pumps 1 & 2 Feeder (3 HP each)
j. 1 ea - 20A/3-Phase CB for Shale Shaker 1 & 2 Feeder (5 HP each)
k. 1 ea - 30A/3-Phase CB for Spare
L. 1 ea - 30A/3-Phase CB for Wireline (15 HP)
b. 1 ea - 480V DISTRIBUTION PANEL BOARD (P2)
i. 480V, 3-Phase, 3-Wire
ii. NEMA 1 Enclosure
iii. 600A MLO with Feed-Thru Lugs
iv. 30 CKT with branch Circuit Breakers for the following loads:
1. 1 ea 100A/3-Phase CB for Hydraulic Power Unit (HPU), (50 HP)
2. 1 ea 100A/3-Phase CB for Air Compressors #1 & 2 (25 HP each)
3. 1 ea 20A/3-Phase CB for Vacuum Degasser (7.5 HP)
4. 1 ea 30A/3-Phase CB for Dog House Heater (15 kW)
5. 1 ea 60A/3-Phase CB for Agitators 3, 4, 5 Feeder (10 HP each)
6. 1 ea 30A/3-Phase CB for Hopper House Heater (15 kW)
7. 1 ea 40A/3-Phase CB for Spare
8. 1 ea 60A/3-Phase CB for Spare
9. 1 ea 30A/3-Phase CB for Spare
10. 1 ea 30A/3-Phase CB for Spare
4. Generator House 120/208 Distribution Panel Board
a. 1 ea - 120/208V DISTRIBUTION PANEL BOARD (P3)
i. 120/208V, 3-Phase, 4-Wire
ii. NEMA 1 Enclosure
iii. 225 MLO, Top Feed
iv. 42 CKT with branch (124/240V-10 KAIC) Circuit Breakers for the following loads:
1. 1 ea - 100A/3-Phase CB for Rig Floor Lighting Panel
2. 1 ea - 100A/3-Phase CB for Spare
3. 1 ea - 100A/3-Phase CB for Boiler House Feeder
4. 1 ea - 60A/3-Phase CB for Spare
5. 1 ea - 30A/3-Phase CB for Spare
6. 10 ea - 20A/1-Phase CBs for Lighting Circuits 1 thru 10
7. 1 ea - 20A/1-Phase CBs for Engine/Generator House Steam Heater Blowers
8. 1 ea - 20A/1-Phase CBs for Trip & Shaker Tank Steam Heater Blowers
9. 1 ea - 20A/1-Phase CBs for Mud Pump 1 & 2 Steam Heater Blowers
10. 1 ea - 20A/1-Phase CBs for Mixer Skid Steam Heater Blowers
11. 1 ea - 20A/1-Phase CBs for Engine/Generator House Lighting Circuit
12. 1 ea - 20A/1-Phase CBs for Generator 1 & 2 Block Heater Feeders
5. Generator House Plug Board
a. 1 ea Metal shroud protected weatherproof receptacle panel with matching plugs for all the
above starters and circuits having cables that exit the Generator House.
b. Receptacles to have protective vapor proof caps. Plugs and receptacles will be
permanently identified.
c. 480V Plug and Receptacle sets provided for the plug board include all loads listed above in
Section C and D (MCC and Panel Board Loads)
d. Additional Plug Board Spare Plugs and Receptacles
6 ea 30A, 3-Pole, 480V
5 ea 60A, 3-Pole, 480V
2 ea 100A, 3-Pole, 480V
6. Generator House 480/208-120V Rig Lighting Transformer
a. 1 ea 75 KVA Transformer with 480V Primary and 120/208V Secondary mounted in a
drip-proof enclosure.
Primary Power will be from the P1 Panel Board.
7. Generator House Power and Control Cabling
a. 1 lot A/C Power and Control Wiring by IEC Systems to connect two 450 KW, 480 volt,
60 Hertz A/C generators to 480V Switchboard
b. All A/C generator power cables with 90 0C rates insulation sized/de-rated for use in
45 0C ambient atmosphere.
c. 1 lot Glastic Plates to prevent excessive heat caused by electrical fields where power
cables enter generators.
d. 1 lot A/C Power and Control Wiring to connect A/C generator control panel to:
i. MCC
1. P1 Panel Board
2. P2 Panel Board
3. P3 Panel Board
4. 75 KVA Lighting Transformer
5. Generator House Plug Board (receptacles)
8. Generator House Lighting
a. Generator Sheds Lighting receptacle string complete with plugs and receptacles,
cable, cable clamps, and all necessary leads and fittings to accommodate the following:
i. 4 ea - C1D2 Hazardous Area fluorescent fixtures complete with lead
ii. 1 ea - C1D2 Hazardous Area Metal Halide floodlight fixture complete with lead
iii. 1 ea - Mounting Stanchions for Floodlights

Group IV - Rotating Equipment
B. “New” American Block Traveling Block and Hook
a. 250 Ton Traveling Block, API load rating: 250 Ton, sheave groove 1 1/8”.
C. “Rebuilt” National C275 Rotary Table and Accessories
a. 27 ½” rotary table with 27 ½” table opening, static load capacity: 650 ton, gear ratio
3.6:1, torque cap: 30,000 ft-lbs @ 60 rpm.
D. “Rebuilt’ Rotary Swivel
a. 250 Ton
Group V - Circulating Systems
A. Two “New” Mechanical Drive 1000HP Mud Pumps
a. Two (2) “New” Eweco - 1100HP Mud Pumps
b. Two (2) “New” Detroit D2000 Engines
c. Unitized on one common skid with:
i. Model C-300-100F(H) OWI Torque Converter
ii. Belt Drive
iii. Dual 24” Eaton Airflex
iv. Drum Hub for 24” Dual Clutch
v. Drum Flange, external 24”
vi. 5 x 6 Centrifugal pump
d. Control system including:
i. Air throttle
ii. Air valve to engage and disengage clutch
iii. Hoses and mounting hardware.
B. Two Tank 850 BBL Mud System- Material and labor to fabricate one (1) two
tank 850 bbl mud system as per our discussions. OEM to completely fabricate tanks
(40’ x 10’-6” x 7’-0”) on a three runner oil field type skid (50’ x 7’-10” x 8”) with loading
hitches on both ends for tail boarding. Tanks to have internal ladders to each compartment,
equipment supports, fold down type handrails and covered with galvanizes bar grating
Mud system to consists of the following:
i. Shaker Tank – Four equal compartments
-Shale Pit
• 10’-0’’ compartment
• One (1) cleanout
• One (1) overflow
- Desander Pit
• 10’-0 compartment
• One (1) cleanout
• One (1) overflow
• One (1) 6” suction line from 5 x 6 centrifugal pump.
• One (1) 8” equalizer. Bottom mounted with top mounted handle.
- Desilter Pit
• 10’-0’’ compartment
• One (1) cleanout
• One (1) overflow
• One (1) 6” suction line from 5 x 6 centrifugal pump.
• One (1) 18” equalizer. Bottom mounted with top mounted handle.
• Equipment supports for one (1) 10 HP agitator
- Degasser Pit
• 10’-0’’ compartment
• One (1) cleanout
• One (1) overflow
• One (1) 8” bottom equalizer and one (1) 8” top equalizer.
• Equipment supports for one (1) 10 HP agitator.
- 9’-0’’ Porch
• Able to accept two (2) 5 x 6 centrifugal pumps
• 10’’ equalizer line to Suction Tank.
• Covered with ¼’’ Chk’d floor plate.
• Overhead plated roof.
ii. Suction Tank – Two Compartments.
- Suction compartment
• 30’ – 0’’ compartment
• One (1) cleanout gate.
• Two (2) 6” suction lines going to main mud pumps.
• Equipment supports for two (2) 15 HP agitators.
- Pill Compartment
• 10’-0’’ compartment.
• One (1) cleanout gate.
• One (1) 8” equalizer. Bottom mounted with top mounted handle.
• One (1) overflow
• Equipment supports for one (1) 10 HP agitator
- Porch
• Able to accept two (2) 5x6 centrifugal pumps.
• 6’’ line to both pumps
• One (1) discharge dumping line
Pill Tank
Suction Tank.
iii. Accessories
1. Single slide for shaker. Slide to mount to the side of the tank and fold down
during transportation. Slide complete with 6” pipe end for hose hook up in the field.
2. Single slide for desander. Slide to mount to the side of the tank and fold down
during transportation. Slide complete with 6” pipe end for hose hook up in the field.
3. Single slide for desilter. Slide to mount to the side of the tank and fold down
during transportation. Slide complete with 6” pipe end for hose hook up in the field.
4. Fold down type walkways around shaker area complete with galvanized grating and
handrails. Walkways to fold down during transport.
iv. Solid Control Equipment
1. Four (4) Mission Magnum 6 x 5 x 11 magnum1 with a 10.5 inch impeller, mechanical
seal and hard iron material, all mounted on a mission fabricated steel base with woods
style coupling, OSHA type coupling guard and a 75 HP 1750 RPM, 3 PH, 230/460 Volt,
60 Hz explosion proof electric motor.
2. Three (3) Derrick DE-AG-10 Agitators complete with 10 HP, 1800 RPM explosion
proof C-face motor bolted to a gear box. Including shaft stabilizer, shaft and impeller.
3. Two (2) Derrick DE-AG-15 Agitators complete with 15 HP, 1800 RPM explosion
proof C-face motor bolted to a gear box. Including shaft stabilizer, shaft and impeller.
4. One (1) Derrick two cone desander.
5. One (1) Derrick sixteen cone desilter.
6. One (1) Hopper with venturi.
7. One (1) Derrick Vacuum degasser 1200 GPM. Skid mounted with heavy duty 3 HP
explosion proof 230/460 volt, 60 Hz, 3 Ph, 1800 RPM motor and manual starter with
heavy duty vacuum pump.
8. Two (2) Derrick Flo-Line Cleaner 503 Shale Shakers w/weir feed complete with
three panel screen frame, support structure, and explosion proof electrics with
the following options:
1. A.W.D. (+7 deg uphill to –1 deg downhill)
2 Standard Screen Underflow hopper
3. Weir feed
4. Super G Vibrations Motors
5. Single side tensioning system
9. 36” Poor Boy Degasser on a separate skid.
VI. BOP
A. Six (6) Station Accumilator
B. Choke & Kill Manifold
C. Note – BOP to be supplied by others (Not include in pricing.)
VII - Utilities
A. Air Compressor & Receiver
a. Two (2) Gardner Denver, ST-30, Electra-Saver II, rotary screw air compressor,
Model EBE99Q. 30 HP, 460 volts, 3 phase, 60 HZ, TEFC, with NEMA 4 Control Enclosure.
b. Two (2) Steel Fab, 400 gallon, vertical air receivers with full skirt, 200 psi working pressure.
Part # A12614. Unit is California Coded.
c. One (1) RNC250 air dryer for 250 CFM.

VIII. Instrumentation
A. Drift Indicator
Totco Double Recording Drift 0 to 8 and 0 to 14. Clock complete with following:
- 1 ea. Godevil Kit
- 1 ea. Chart tool & Chart Reader
- 1 ea. Tool Maintenance Box w/ Tool
- 100 ea. Chart 0 to 8
° and 0 to 14°
- 10 ea. Rubber Finger Stabilizer
- Fishing Tool 7 rope sockets
B. Indicator/Gauge & Counter
EMS-2 or Equivalent Rotary Torque indicator, Weight indicator, and Tong torque gauge,
Circulating pressure gauge, two (2) ea. Pump stroke counter.
C. Drilling Recorder
EMS-2 or Equivalent Drilling recorder, 9 pen (weight, torque, penetration rate, pump
pressure, rotary rpm). (Diameter 103 Dan Kurang 6 Buah Printed Circuit Board).
D. PVT
EMS-2 or Equivalent Pit volume totalizer, single channel with audio alarm and
warning lights, four pit transmitters totalizing relay, gain and loss gauge with gauge
zero devices. Full digital instrumentations.
E. Flow-Shoe-Device
EMS-2 or Equivalent Device complete with recorder and alarm system
Group IX - Fabrications
A. Accumulator/Junk Bend/Air Package Combo
a. Material and labor to fabricate one (1) accumulator/pipe bend skid as per our conversations.
OEM to fabricate a three runner oilfield type skid (40’ x 10’ x 12”)
covered with ¼” check plate. Piping to be done during rig up. Skids complete with:
i. One (1) arched type roof and enclosure.
v. Mounting supports for two (2) vertical air receivers.
vi. Mounting supports for one (1) accumulator.
vii. Mounting supports for:
1. Two (2) air compressors
viii. Access doors
1. One 36” swing type door way
2. Two (2) 48” double door way.
B. Parts/Mechanic Shop - “New”
Material and labor to fabricate one (1) parts/change house. House (38’x 10’x 9’) to be
constructed on an oilfield type skid (40’x 10’x 12”) with loading hitches on both ends for
tailboarding. Top of skid covered with ¼” checker plate. House to be complete with:
- One (1) work bench and One (1) Table
- Two sets of shelves on each wall.
- Four (4) storage benches.
C. 500 bbl Water Tank
Material and labor to fabricate one (1) 500 bbl water tank as per our conversation. Tanks
fabricated on oilfield type skids with loading hitches on both ends for tailboarding. Skid ends
to be covered with ¼” check plate.
Tanks complete with the following:
- Two (2) 3 x 2 x 11 Centrifugal pumps with 25 HP Motors
- Suction and Discharge Piping.
- Two (2) ladder rung to top of tank (In and Out)
- 4” Fill cap
- 2” Outlet
- 1” Drain
D. One (1) 12,000 Gallon Fuel Tank
Material and labor to fabricate one (1) 12,000 gallon fuel tank as per our conversation.
Tanks fabricated on oilfield type skids with loading hitches on both ends for tailboarding.
Skid ends to be covered with ¼” check plate. Tanks complete with the following:
- Two (2) fuel transfer pumps
- One (1) filter system.
- Suction and Discharge Piping.
- Two (2) ladder rung to top of tank (In and Out)
Top and Side man ways, 4” Fill cap, 2” Outlet, and 1 ½” Drain
E. Cable Trays- Material and labor to fabricate one (1) lot of cable trays as per the following.
Cable trays to be fabricated as follows:
- Two (1) 40’-0” sections from substructure to fuel tank.
- One (1) 35’-0” section from mud tanks to main trays.
- One (1) 20’-0” section from substructure to main stairs.
- Cable trays complete with the following:
• Hinged doors in 5’-0” sections with chain for each doorway.
• Flat expanded metal running the length of each tray.
• ½” round bar at each end of cable tray to provide protection when pulling wires.
F. Mud Gas Seperator and Transportation Skid - “New”
- Material and labor to fabricate one (1) 36” poor boy degasser and skid. Gas buster to me
mounted on a three-runner oilfield type skid with loading hitches on both ends for tailboarding.
Gas buster complete with:
• 36” Pipe with weld caps on both ends.
• Internal baffles.
• All piping and pipe brackets.
• Gas buster to elevate to working condition to allow operation under half full conditions.
• Gas buster to be mounted in lay down position for transport and to be raised by
truck for operation.
Group X - Rig Up Items
A. High Pressure Piping
a. Material and labor to fabrication one (1) lot of high-pressure piping. All piping to be 4”
schedule 160 and all unions to be weld type 1002. High pressure piping complete
as per the following:
i. Standpipe
1. Standpipe to be located on the Off-Driller’s Side.
2. Standpipe to have hammer union breaks at mast sections so it can me transported
without being taken off the mast.
ii. Standpipe Manifold
1. The standpipe manifold will be complete with manifold type tee with two 2” outlets.
Outlets to have hammer union connections only.
2. The 4” outlets to have a 4” gate valve on the top of the cross.
iii. High Pressure Line
1. The high-pressure line will run from the bottom of the standpipe manifold to the
side of the mud boat
2. The cellar line will be mounted to the mast support beam.
3. There will be hammer unions at break of the substructures for transportation.
B. Structural set and assemble:
a. Mast and Substructure
i. Mast accessories.
ii. Install flooring, handrails, v-door, stairs, etc.
C. Set and align
a. Rotary Table
b. Drawworks
c. Doghouse
d. Utility house control panel and foot drawworks console.
e. Mud Pumps
f. Mud system
g. Brake water/trip tank
h. Water Tank/Fuel Tank
i. Catwalks and pipe racks
j. Cable Trays
k. Koomey/Junk basket
D. Piping, Fittings, hoses, valves, etc.
a. Water Supply
i. To Mud system and mixing system
ii. Rig Floor
iii. Brake water system
iv. Feed and return lines from brake water tank to drawworks drum and brake.
v. Fuel System
1. To feed and return lines from duel tank to generator set.
vi. Air System
1. Air Supply for accumulator unit and rig floor
2. Hose connections from rig floor air manifold to drawworks control console, air
hoist and other floor tools
a. To generator set engine starters
vii. Miscellaneous
1. Vibrator hoses.
viii. Electrical Rig Up
ix. Testing
1. Fill mud tanks with water
2. Provide lube products to all machinery.
3. Provide Fuel for testing
4. Circulate water through mud system
5. Run air compressors.
6. Pressure test all high pressure lines and connections to working pressure
7. Run all solids control equipment.
8. Load test generators
9. Test all SCR assignments.
x. Rig Down
1. Rig down and assist in load out on customer furnished trucks.

Price & terms : Please enquire using the email form below.


If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Mechanical Trailer Mounted Rig for Sale
1000hp New Land Drilling Rig in USA
Trailer Mounted Rig for Sale
Mechanical Drilling Rig 1000 hp for Sale
Trailer Mounted Land Drilling Rig for Sale

-----------------------------------------------------------------------------------------------------------

Available for selling

Trailer Mounted New Drilling Rig 1000hp for Sale
Contact Us
ID 1436
Full Displacement Diesel Motor Yacht for Sale
Worldoils Marketplace
Full Displacement Diesel Motor Yacht for Sale

Worldrigs ID: WR1056

Full Displacement Motor Yacht for Sale
2010 built Motor Yacht for sale
Over 61m Motor Yacht for Sale

Main Characteristics
Delivery Year : 2010
Engines : 2 x 2,680 Hp Caterpillar 3516 B
GRT : 1,070 tons
Displacement : 700 tons light load – approx
Construction : Steel hull; Aluminium superstructure

Classification
ABS, A1 Commercial Yacht Service AMS
ACCU ES R-2; MCA LY2 compliant; ISM/ISPS

Dimensions
LOA : 61.80m
Beam : 11.00m
Draft : 3.00m max at half load

Capacities
Accommodation : 12 Guests in 6 staterooms – of which for on deck
Crew : 8 + 1 cabins for 15 – 18 crew incl. captain
Fuel : 158,000 litres in 8 tanks
Fresh Water : 39,000 litres
Water Maker : 26,000 litres/day
Hot Water Heaters : 900 litres
Holding Tank : 8,200 litres

Jacuzzi Réservoir : 20,000 litres
Lube Oil : 4,000 litres
Dirty Oil : 4,000 litres
Sludge Oil : 2,800 litres
Grey Water : 5,000 litres
Black Water : 3,200 litres
Bilge Water : 1,800 litres

Speed and Range
Maximum Speed (in knots) : 17 knots
Cruising Speed (in knots) : 14 knots

Fuel Consumption :
168litres/hour @ 1,000 rpm
200.5 litres/ hour @1,200 rpm
242 litres/ hour @1,300 rpm
290 litres/ hour @1,450 rpm
260 litres/ hour @1,500 rpm
450 litres/ hour @1,600 rpm

Range : 6,000 nm @ 12 knots w/ a reserve of 10% of the fuel

Accommodation
An accommodation for 12 guests in a forward facing master suite on the main deck and
five further staterooms, the accommodation is spacious and modern. With a cinema,
a large sundeck with enclosed gymnasium and large swimming pool and Jacuzzi, as well
as extensive exterior dining and entertainment space. It is fully equipped for entertaining.
Large tender garages aft keep the exterior space free for guests.

Master’s Suite
The master suite is forward on the main deck with 270 degree panoramic views
over the fore deck.

Guest Staterooms 1 - 5
There are three staterooms on the main deck, with a VIP on the bridge deck and
a twin stateroom on the lower deck.

Crew Quarters
There is crew accommodation for 16 on the lower deck, in eight twin cabins with
en suite bathrooms and a large crew mess and laundry forward.

Sun Deck/Gym/Pool
The sun deck is large with casual seating aft and an enclosed gym under the arch
with a dayhead and separate shower. Forward is a large pool with hydro massage
nozzles and underwater LED lights. There is also a large area forward for sunbathing.

Cinema
There is an intimate cinema room on the main deck with a very large screen and
seating for 3 – 5 people

Fitness
A large custom gym on the sun deck featuring custom supplied equipment

Mechanical Equipment
Engines : 2 x 2,680 Hp CAT 3516 B, 2000 kW @ 1,600 rpm
Gearbox : ZF W 7540
Steering : 2 x Tenfjords SR 562-FCP
Bowthruster : Brunvoll FU-37-LTC-1000 240 Kw
Stern Thruster : Sternthruster SPJ57RD run off of a dedicated CAT 12 engine
Stabilisers : Vosper - Zero Speed (at anchor) Thornycroft NK 50100
Engine Control System : Kongsberg Integrated DATACHIEF C20 Alarm
Monitoring & Control System (remote)
Fuel Separator : Alfa Laval PA600 400V
Air Compressor : 2 x Ceccato compressors for compressed air system
w/outlets throughout the yacht w/fast connections in recessed boxes.

Fouling Protection : ACG Ecolcell SW Titando R-300 Fouling Protection
System is fitted to protect the engine room through hulls from growth
(not the through hull for the watermaker)
Protection System : Fompmatic Galvanic

Sewage Treatment : Tan – Biodisk FVN30 Sewage Treating System
treating both gray and black sewage using a chemical and biological
phase.  Hamann Sewage Treatment. System as well & can be used in
connection w/ or separately to the Biodisk System.

Generators :
3 x CAT C9, 380V 50 Hz-175 Kw
1 x CAT C4, 380 V 50 Hz-85 Kw

Generator Exhaust :
Through a soundown exhaust exiting the hull above the waterline.
Two of the three generators also have an alternative dry exhaust
leads to the exterior side of the upper superstructure.

Electricity : 3 x 175 Kw; 380V/220V and 24V feeding circuits
Shore Power : ASEA Marine System 200KVA frequency meter and
phase-sequence indicator with 2 x 35m/114'8" 250AH shore power
cords complete with Glendinning Enrolling System on board.  

Air Conditioning : Condaria; air treatment units dimensioned to
allow at least 25m3/h/person - of recirculated chilled water
w/additional exterior treated air for regular changes of air on board

Water Maker : 2 x Idromar MC 135
Hot Water Heaters : 3 x stainless steel tanks

Navigation Equipment
Navigation System : Integrated bridge (K-bridge of Kongsberg)
With Kongsberg Dynamic Positioning System (DPS)

Controls :
Kongsberg Integrated Control system  providing seamless
integration of Navigation, Propulsion Control and Ship Automation
functionality offering significant operational advantages compared
to conventional solutions.

Gyro : 1 x Single Gyro system NAVIGAT X mk1  w/accessories
Log : NAVIKNOT electro-magnetic speed log system
Magnetic Compass : 1x Installed in the wheelhouse ceiling
DGPS : 1 x DGPS Navigator MX420/8
GPS : 2 x
Autopilot : 1 x
Echo Sounder : GDS 101 echo sounder system
Water Temperature System :  1 x
Speedometer : 1 x
Radar :  ARPA Band S
Radar : ARPA Band X

Carts :
SEAMAP Electronic Chart Display & Information System (ECDIS)
Chart Plotter, compliant with official ENC charts, CM93 from
C-Map and ARCS from UK Hydrographical office

AIS : R4 AIS connected with DGPS and ECDIS
Wind Station : 1 x
Meteofax :
1 x Yacht speed repeater on wing control panels
w/engine and thrusters remote controls Wind speed
repeater on wing control panels Cospas Sart 406 MHz
EPIRB w/hydro release Dynamic Positioning System

Loudhailer :
1 x Ships typhoon KAHLENBERG F2 w/control M-511A,
selector M469A

Search Lights : 2 x Lights w/remote control colour lights UV
Other :
1 x Barometer
1 x Biographer
1 x Hygrometer
1 x Thermometer
1 x Clock
1 x Sextant
1 x Chronometer
1 x Binoculars

Communication Equipment
SSB : 1 x BLU SSB Sailor HS 4500 MF/HF
VHF:
1 x VHF A1 DSC version general and USA
1 x VHF RT4822 VHF DSC version general & USA

Antennas :
4 x Shakespeare VHF 5208 R 23 Antenna
2 x Shakespeare BLU 5300 28 Antennas

GSM :
1 x GSM Antenna (GSM mobile phone uplink in remote areas)
1 x Altorage GSM coverage via satellite in offshore areas
1 x Fleet 77

SATCOM :
1 x Seatel 6006 wave-call (1Mbps downstream, 256kbps upstream)
1 x Seatel 5004 TV at sea

Navtex : 1 x Navtex Receiver and Antenna Nav 5
Intercom/Landline :
1 x DTEC telephone in each room w/intercom capability and
service call bells
 1 x Automatic telephone network receives all type calls
(satellite, land line, VOIP, GSM/GPRS) with Telefax interface

Walkie-talkies : SIMRAD HT50 w/wireless headsets for manuevering

Deck Equipment
Large Jacuzzi which is equipped with jets that allow you to swim against the current
12 x Underwater Lights installed around the stern

Anchorage
2 x Anchors approx. 765 Kg type HHP made from galvanized steel w/high holding power
fit flush in the anchor pocket to maintain the shell plating geometry
2 x OFFICINE NANNI stainless steel vertical windlass
1 x Chain wash system is fixed installed
2 x Chains - 160 m/24mm U2 grade galvanized stainless steel chain cables (link chain
w/joining shackles and swivels are on each chain end)
2 x Stainless steel capstans on the main deck both w/316L stainless steel drums
1 x MOTOMAR electro hydraulic folding and telescopic stainless steel gangway on the aft
main deck port side, w/walking width of 900 mm and max length of 8000 mm.

Boarding Arrangements
The gangway is made of AISI 316 stainless steel for the structure and has the following
characteristics:  side swing of +/- 15 degrees; Inclination of +/- 15 degrees; teak grating;
electric feeding/ control panel; 200 Kg capacity; optic fiber lighting; bell push or phone
extension

2 x CRAMM hydraulic side boarding ladders located amidships at port and stbd side.  The
ladders are recessed in the bulwarks and are fully automatic and controlled from panels
located nearby w/optic fiber lighting or LED light and bell push or phone extension.

A hydraulic swim stair with handrails is integrated in the aft platform and provides very
comfortable access on board for swimmers and divers.

Entertainment Equipment
The entertainment system is based upon a centralized Kaleidoscope digital audio and video
server that uses a digital channel that leaves the signal unaltered to create a multi-room AV
system without limitations.

• Kaleidescape Audio Server CD, MP3
• Kaleidescape Video Server VCD, DVD
• 25 simultaneous users on demand
• LCD touch screen controls
• LCD / Plasma screens

• SAT TV connection
• Canal + descrambler
• Dolby Surround Sound Systems
• Access to navigation systems, Internet and Email (WiFi)
• Crestron cabin and entertainment control system including wireless active
matrix touch screen controls in all areas

Galley and Laundrey
1 x Freezer at -20 degrees Celsius and 6.5 m3;
1 x Cold room at 4 degrees Celsius and 7.5m3;
1 x 1,000 litres refrigerator divided into -20 & 4 degrees Celsius compartments.
1 x USON Trash Compactor and Garbage Macerator in galley (a cold storage,
forward near the chain locker, stores the compacted material)

3 x Miele WS 5436 LP MC 23 Heavy Duty industrial washing machine
3 x Miele T 5206 Heavy Duty tumble dryer
1 x Miele HM 1683 ironing machine
1 x Stirella steam iron
1 x Stainless steel sink in laundry
6 x Icemaker (galley, main deck pantry, main saloon bar, bridge deck pantry, bridge
deck exterior pantry, sun deck bar)

1 x Gaggenau K131-114 fridge combination (one in pantry, one on bridge deck)
1 x Gaggenau G1225-145, 45 cm dishwasher in pantry
1 x Expresso maker
1 x Dishwasher on bridge deck
1 x Storage unit w/stainless steel work top and sink (on bridge deck)

Safety and Security Equipment
1 x Autronica fire alarm system
4 x 20 person inflatable life raft pack A, oceanic class SOLAS approved installed on the
upper deck bulwarks
2 x 6 x Person inflatable SOLAS approved life rafts
2 x 1 x Person inflatable life raft, SOLAS approved installed on upper deck bulwarks

Tenders and Watersports Equipment
Tender 1
1 x 22’5” Frauscher 686 LIDO tender w/VW Marine TDI V6, one engine; 265 Hp stern drive
Bravo I w/duo prop (in serial): Cockpit:  Front seat with foldable seating surface; seating
area in bow of the boat; foldable table; amplified seating area in the front - cross-bench;
Clarion radio w/CD player, iPOD interface with 4 water resistant speakers; freezer below
rear bench Sun and Bathing:  Padded teak sun bed at stern; teak bathing platform;
water ski hook; bathing ladder; combined bimini w/sprayhood; fresh water shower;
fresh water tank Hull and Deck:  Teak deck; fender bar; enhanced handrail; 2 point
lifting system for easy craning at the base ship  Fittings:  Anchor w/rope; boat hook;
2 fenders; storage persenning Electric:  Complete electric installation w/two batteries;
Raymarine C80 w/GPS Chart plotter; shore power 230V A/C w/charger and cable; VHF
radio RAY240E; Tender Tracking System.
Altenatively to the Frauscher 686 LIDO a CASTOLDI 23’ JET TENDER is also available and
suitable for the Garage, if so preferred.

Tender 2
1 x Castoldi Jet tender 16’ C.E. Category C, water jet unit type Jet 05diesel engine 125 Hp
Yanmar (equipped with GPS and Tender tracking system)

Tender 3
Solas approved approx 3,8m RIB MOB with 20 HP outboard engine
1 x Bombardier RXT-X (equipped with Tender Tracking system) 255 Jetski for 3 people; 255 Hp
Fuel station at the garage storage area for the tenders
 
Dive Compressor
1 x Bauer Utilus II E dive compressor 2.2 KW

Cranes/Davits
1 x MOTOMAR electro hydraulic foredeck tender crane MCA/SOLAS, with
a maximum load 1,200 kg
2 x 2 MOTOMAR electro hydraulic operated sliding davits for main tender in aft peak, max load
2000 Kg for each crane arm.

Price & terms : Please enquire using the email form below

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Full Displacement Motor Yacht for sale
2010 built Yacht for Sale - over 61m long
Motor Yacht - over 61m - for Sale
Over 61m Motor Yacht for Sale
2010 built Motor Yacht for sale
Full Displacement Motor Yacht - 2010 built
Motor Yacht for Sale - 2010 built
Full Displacement Diesel Motor Yacht for Sale
-------------------------------------------------------------------------------------------------------------------

Available for selling

Full Displacement Motor Yacht for Sale
Contact Us
ID 1056
Le Tourneau LDW1000K Drawworks for sale
Worldoils Marketplace
Le Tourneau LDW1000K Drawworks for sale

Worldrigs ID: WR2115

Le Tourneau LDW1000K Drawworks for sale
Le Tourneau 3000hp Drawworks for sale
New Le Tourneau LDW1000K Drawworks
2011 built Le Tourneau LDW1000K Drawworks for sale
Unused Le Tourneau 3000hp Drawworks


Description
Make : Le Tourneau
Model : LDW1000K
YOM : 2011

Measurements

Dimensions : 6.6m x(l) x 3.9m(w)x 2.6m(h)
Weight  : 33.4 Tonnes

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


 -------------------------------------------------------------------------------------------------------
Search words(for official use only) :
Le Tourneau LDW1000K Drawworks for sale
Le Tourneau 3000hp Drawworks for sale
New Le Tourneau LDW1000K Drawworks
2011 built Le Tourneau LDW1000K Drawworks for sale
Unused Le Tourneau 3000hp Drawworks

 -------------------------------------------------------------------------------------------------------
Available for selling

Le Tourneau LDW1000K Drawworks for sale
Contact Us
ID 2115
188 pax Fast Crew boat For Sale - 2003 built - For Sale
Worldoils Marketplace
188 pax Fast Crew boat For Sale - 2003 built - For Sale

Worldrigs ID: WR471

Fast Crew Boat for sale
34M Fast Crew boat For Sale
2003 built Fast Passenger Ferry for Sale

Specifications
Year built : 2003
Capacity : 188 pax
Class : KST

GRT : 173 ton
LOA : 34.26 m
Breadth : 6.80 m
Depth : 3.01 m
Draft : 0.9m (bow) / 1.0m (stern)
LBP : 34.00 m
Material : Aluminum

Passenger : 188 pax (Max 238 pax) + 4 crews
Speed : Max 33 knots, service speed : 28 knots
Main engine : MTU 1450 KW / 1800 rpm / 2 units
Fuel consumption : MGO 400 liters / hour

Delivery : Prompt

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------------
Search words(for official use only) - 
Fast Crew Boat for sale
188pax Passenger Ferry For sale
Crewboat for sale in Thailand, Malaysia, Indonesia
34M Fast Crewboats from China, Korea, Japan
188 person Crewboat for sale
Crewboats for sale in South America, North, Africa, Middle east
2003 built Crewboats for sale for West Africa, Nigeria, Libya
Crewboats for South America, Brazil, Trinidad

----------------------------------------------------------------------------------------------------------------

 

Available for selling

Fast Crew Boat 188 Pax for sale
Contact Us
ID 471
Used NGL Fractionation Storage Tanks for Sale
Worldoils Marketplace
Used NGL Fractionation Storage Tanks for Sale

Worldrigs ID: WR1347

LPG Storage Tank for Sale
NGL Fractionation Storage Tanks - Built 1972
30,000 Gallon NGL Fractionation Storage Tanks for Sale

Description
Quantity : 1
Manufacturer : Trinity
Year : 1972
Dimensions : 109" OD x 47' OAL
Pressure : 250 psi
Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


NGL Fractionation Storage Tanks           LPG Storage Tank

------------------------------------------------------------------------------------------------------------------------------
Search words(for official use only) :
LPG Storage Tank for Sale
30,000 Gallon NGL Fractionation Storage Tanks for Sale
Used NGL Fractionation Storage Tanks for Sale
LPG Storage Tanks for Sale
NGL Fractionation Storage Tanks - Built 1972
1972 Built - 30,000 Gallon NGL Fractionation Storage Tanks
LPG NGL Storage Tanks for Sale
Used 30,000 Gallon NGL Fractionation Storage Tanks for Sale

------------------------------------------------------------------------------------------------------------------------------

Available for selling

NGL Fractionation Storage Tanks- 30,000 Gallon 1972 Built - For Sale
Contact Us
ID 1347
2006 built Motor Yacht for Sale
Worldoils Marketplace
2006 built Motor Yacht for Sale

Worldrigs ID: WR1057

Motor Yacht for Sale
Over 66m Motor Yacht for sale
Motor Yacht for Sale - 2006 built

Main characteristics
Construction : Steel / Composite
Crew : 17
Engines : 2 x MTU 4000 3520KW
GRT : 1393 t
Summer Displacement : 1403t even keel
Construction Year : 2006
Classification : L.R.  +100 A1 SSC Yacht (P) G6 + LMC UMS

Dimensions
LOA : 66.74 meters
Beam : 12 meters
Draft : 3.55 meters

Accommodation
Master Stateroom
Four Guests’ Cabins
Master Cabin office - an additional two berths

Capacities
Fuel : 200,000 litres 
Fresh Water : 30,000  litres 
Lube Oil : 1,700 litres 
Dirty Oil : 2,600 litres  
Black Water : 26,000 litres

Speed and Range Under Power
Maximum Speed : 17.0 knots
Cruising Speed : 14 knots
Fuel Consumption : 500 litres per hour
Range : 4500 nm

Mechanical Equipment
Engines : 2 x MTU 4000 3520KW
Engine hours : Port 6377 Stbd 6365
Propulsion : 2 x ZF Reversing Gear coupled to 2 x shaft & 5 blade propellers
Stabilisers : Quantum Zero Speed

Bow thrusters : Schottle 185KW
Rudder Angle Indicator : KBM Machinefabriek 80/40/350
Generators & Electricity : 3 x MAN
Generator Hours : 12,000 hours P+S
Electricity : 220V
Converters : Shore Power converters
Air Conditioning 
Sewage System : Haman

Galley and Laundry Equipment
Convection Oven
4 hob induction stove
4 hob Electric Stove        
Electric Oven
Dishwasher
Various Refrigeration Draws
1 Fridge

Laundry
All Miele Proffesional
2 x small dryer
2 x large washer machine
1 x small washer
2 x large tumble dryer

Navigation and Communication Equipment
A1,A2,A3 compliant GMDSS equipment
Auto Pilot
Fleet 77
Fire Detection/Sprinkler Panels
Satellite Compass

2 x DGPS
2 x VHF
AIS
LRIT
NAVTEX
AIS pilot plug
Echo sounder

Fish finder
Speed log
Radar X band
Radar S band
Ecdis system
Gyro compass

M/E RPM indicators
Automatic telephone
Stabilizer system (Quantum)
Matrix Fish finder
CCTV controller
Iridium x 2
Bow thruster
2 wing stations

Communication Equipment
SATCOM 
V SAT 
Fleet Broadband 
VHF 
SSB 
Full GMDSS Station 
Transceiver 
Air Horn

Onboard IT
Dell Server Running Vmware ESX
Virtual Domain Controller (Microsoft Server 2003)
Virtual Email Server (Microsoft Server 2007)
Virtual Desktop for Bridge Digitrace Software

4 x Desktop Computers
2 x Laptop Computers
Bridge Samsung LaserJet Printer
Engine Room HP InkJet Printer
Secure Wifi Coverage in all areas

Entertainment Equipment
Guest Area -
103 Inch Plasma TV
Sky TV
Kaliedescape player (Music and Movies on demand)
Blue Ray player
CD Player
HD DVD Player

Ipod Docking Station
Radio Tuner
Playstation
Xbox
Wii
Mast and Bow Underwater Camera
Steward Call
Secure Wireless Internet (VSAT, 3G)

Guest Cabin -
Plasma TV
Sky TV
Kaliedescape player (Music and Movies on demand)
DVD Player
Ipod Docking Station
Radio Tuner
Mast and Bow Underwater Camera

Tenders and Watersports Equipment
1 x 31’ Chase Tender
1 x Defender tender
1 x MOB nautical rescue boat

2 x Yamaha wave runners
2 x Yamaha stand up jet skis
2 x 2 man Kayaks
3 Trek road bikes
3 Trek Mountain bikes
6 x complete sets of diving equipment etc

Assorted fishing gear
Wake board water skiing and towable flotation gear
1 x rowing machine
1 x running machine
Various free Weights

Security and Safety Equipment
Full Yacht Life Line Medical Kit
2 x EPIRB
2 x SARTS
NOVEC fire protection in E/R and Emergency Generator Room

Local Sprinklers for M/E’s and Aux Engines
Sprinkler fire protection throughout Accommodation
4 x SCBA and associated equipment
4 x Spare SCBA air Cylinders
Deck Sensor Security System
Extensive CCTV coverage. Touch panel operation

Anchor and Mooring System
2 x Anchor Windlass’ 7 Shackles 
2 x 750kg stockless Anchor

Boarding Arrangements
1 x stern Passerelle 
1 x interchangeable Accommodation Ladder for side access

Price & terms : Please enquire using the email form below

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Motor Yacht for sale
2006 built Yacht for Sale - over 66m long
Over 66m Motor Yacht
Motor Yacht - over 66m - for Sale
Over 66m Motor Yacht for Sale
Motor Yacht for Sale - 2006 built
2006 built Motor Yacht for sale

-------------------------------------------------------------------------------------------------------------------

Available for selling

Motor Yacht - 2006 built - for Sale
Contact Us
ID 1057
Offshore Jack up Drilling Rig For Sale
Worldoils Marketplace
Offshore Jack up Drilling Rig For Sale

Worldrigs ID: WR406

Jackup Drilling Rig -  Friede & Goldman L780 For Sale
Offshore Oil & Gas Drilling Rig
Oil &  Gas Jackup Drilling Rig For Sale
Friede & Goldman L780 Jackup Rig For Sale
Offshore Jack up Drilling Rig For Sale


Specifications

Rig Type : Jackup
Rig Design : Friede & Goldman L780
Year Built : 1981
Upgrade : 1994
Class ; ABS
Registry : Marshall Islands
 
Water Depth - Ft : 300
Drilling Depth - Ft : 20,000
Quarters ; 86 + hospital w/examination table
Dimensions : 180' x 175' x 25'
Helideck : 62' diameter for Sikorsky S-61
Variable Deckload - Operating : 3,800 kips to 4,275 kips
depending on operating area

Variable Deckload - Transit : 4,275 kips
Number of Legs : 3
Leg Length : 401' 8"
Usable Leg Below Hull : 362' 4
Spud Can Diameter : 39' 8"
Cantilever Reach : 40'
Transverse Movement : 10' port or starboard of centerline
Max Combined Structure Load : 1,000 kips

Bulk Mud & Cement : 9,160 cu ft
Liquid Mud : 1,800 bbls
Fuel Oil : 2,049 bbls
Drill Water : 4,450 bbls
Potable Water : 1,180 bbls
Sack Storage : 3,000 sacks

Drawworks : Mid-Continent U-1220 EB w/1-3/8 drill line
Derrick : Dreco 30' x 30' x 160', 1,000 kips static hook load
Top Drive : Varco TDS-3 w/PH60 pipe handler
Pipe Handling System : Varco AR3200 Iron Roughneck
Rotary : Oilwell A-375, 37-1/2"
Top of Rotary Table to Bottom of Barge : 51 Ft.

Ram BOP :
Cameron Type U (single & double) 13-5/8" 10K and
T-3 double 21 1/4" - 2K Shaffer 13 5/8" 5K and
Shafer 21 1/4" - 2K

Annular BOP : Shaffer 13-5/8" 5K
Diverter : Hydril MSP 20"
Main Engines : (4) Caterpillar D-399
Mud Pumps : (2) Gardner-Denver PZ-11
Solids Control : (3) Brandt LCM-2D/CM2, Cascade system
Cranes : (2) Seatrax Model 6020 with 110 ft Booms

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels
where needed.

The details mentioned above are believed to be accurate but are not
guaranteed.


---------------------------------------------------------------------
Search words(for official use only) :
Jackup Drilling Rig For Sale
Jackup rigs for sale
Offshore Jackup Rig Builders
Friede & Goldman L-780 Jackup Rig For Sale
Offshore Drilling Jackup Rigs For Sale
Oil & Gas Jackup Drilling Rig For Sale
Jackup Rig sellers
Used Jackup Rigs sellers
Offshore Jackup Rig
Used Offshore Jackup Rig
Old Jackup Rig For Sale

------------------------------------------------------------------------
Available for selling

Jackup Drilling Rig - Friede & Goldman L780 For Sale
Contact Us
ID 406
Pilot Boat / Patrol Boat / Crew Boat
Worldoils Marketplace
Pilot Boat / Patrol Boat / Crew Boat

Worldrigs ID: WR363

Pilot Boat for sale
Crew Boat for sale
9.5M Crew Boat for sale / Pilot Boat for Sale
Patrol Boat for sale in Asia

The vessel's designed and built to InternationalSurvey Standards as set out by ABS,
MSA New Zealand and Lloyds of London and fully comply with oil and gas field
requirements for design, construction and solas for safety.

Especially for this Fast Patrol Boat has been designed with the ability to operate in
all weather conditions and in shallow water.

General Specifications :
Size : 9.5m
V hull : Yes
Fully airconditioned : No
Cummins diesel engine :
1 x 315 Turbo Marine
6BTA 5.9 liter 6 cylinder

Propulsion jet : 1 x Doen DJ 130 water jets
Aluminium marine grade : Plates 5083 extrusions 6063
Seating and passengers : 4 interior 2 exterior
Draft : 0.40m
Max. speed : 28 knots
Fuel consumption : 37 lt per hour

Year built : 2005
LOA : 10.18m
LWL : 8.11m
Beam : 2.8m
Deck cargo : 1,000 kg

Luggage racks : No
Toilet : No
Windows : 8 & 6mm toughened glass

Non slip decking : Yes
Emergency stop : Yes
Navigational lights : Yes
Sea rescue door : Yes
Rescue equipment box : Yes
Dedicated batteries for mains and auxillaries : Yes

Fittings and Accessories :
Compass : Yes
Radar : Furuno 1712 MKII 24nm
GPS : Garmin GP 1650 GPS/Plotter
Depth sounder : Furuno FCV 667/612
Radio HF SSB Marine : Icom IC-M70 150W
Marine antenna : 390 USA HF
Radio VHF marine : Motorola Triton M100

Antenna : Shakespeare SS-420
Spot lights : Aft x 2 port, Starboard x 1
4 x FWD driving lights : Yes
2 x 5.000.000 CP search light : Yes
Offshore life jackets : 6
Inflatable life raft : Yes
Emergency exit : No

Life buoys : 2
5kg Co2 & ABC Fire extinguisher : Yes
EPIRB distress beacon : Yes
Paint 4 coats : Intergard 269
Patrol boatrs - yellow : Interuf 262
Passenger boats - Red : Intergards 263

Blue and green : Interthane 990
All roof safety orange : Interspeed 376 anti fouling
Lifting eyes : Yes
Blue and red strobe lights : Yes
Siren and PA (300w) : Yes
Rescue first aid kit : Yes
Basic first aid kit : Yes
12 x additional life jackets : Yes
2 x additional life buoy : Yes
4 x water proff flash lights : Yes
18 emergency rations : Yes
Illumination glow sticks : Yes
Woolen & thermal blanket : Yes
Complete emergency flare and smoke kits : Yes
Navigational maps : Yes
Rifle brackets : Yes

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------------------------
Search words(for official use only) :
Pilot boat for Sale
Patrol boat for sale in Singapore, Indonesia
Crew boat 2005 Built for sale 
Venezuela, Columbia, Trinidad, Mexico
Crew Boats for Africa, Europe, South America
Pilot Boats for Africa, Europe, South America,
Venezuela, Columbia, Trinidad, Mexico
Patrol boat for sale
Crew boat for sale in Singapore
Pilot boat for sale in Singapore

------------------------------------------------------------------------------

Available for selling

Pilot Boat for sale
Contact Us
ID 363
Gardner Denver 2000 Drilling Rig for Sale
Worldoils Marketplace
Gardner Denver 2000 Drilling Rig for Sale

Worldrigs ID: WR1030

Gardner Denver 2000 Drilling Rig for Sale
Gardner Denver Drilling Rig - 1978 Built for Sale

 
Model : 2000 Drill Rig
Manufacturer : Gardner Denver
Year : 1978
Condition : Used

Description :

1978 Gardner Denver 2000 Drill Rig
Trailer Mounted
2 – Detroit 471 turbo diesel deck engine (comes with spare)
Triple drum draw works
57' ft. tubular mast - rated at 100k
100k pullback draw works
18” Howard Turner rotary table
4-½" x 35’ long Kelly bar
Garner Denver 7x10 duplex mud pump
Cathead
Water break
6 line block
5/8" cable on draw works (Kelly and blocks)
1-hydraulic breakout tong (1 backup)
Spinning chain
4-hydraulic leveling jacks
Rack boards set up for 4-1/2” pipe and 8” collars – single height
Air clutches
200 gallon fuel tank
2 cylinder john bean soap injection pump
3” mud piping
2” air piping
Lay down catwalks with handrails

Location : USA

Price & terms : Please enquire using the email form below.       

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
1978 Built Gardner Denver 2000 Drilling Rig for Sale
Land Drilling Rig - Gardner Denver 2000 - for Sale
Gardner Denver 2000 Trailer Mounted Drilling Rig
Used Land Drilling Rig for Sale in USA
Gardner Denver 2000 Used Drilling Rig for Sale
-------------------------------------------------------------------------------------------------------
Available for selling

Gardner Denver 2000 Drilling Rig for Sale
Contact Us
ID 1030
Gardner Denver 700 Mechanical Drilling Rig
Worldoils Marketplace
Gardner Denver 700 Mechanical Drilling Rig

Worldrigs ID: WR1237

Gardner Denver 700 Mechanical Drilling Rig
Used Mechanical Drilling Rig for Sale

Drawworks
Gardner Denver 700 Drawworks with 481 Parmac Hydromatic Brake Powered by
(2) Cat C15 Engines with National 195-80 Torque Converters – 800H

Substructure & Mast
Pyramid 131’ Mast, 550,000 GNC, 1 ¼” Line, Pyramid 25’ Substructure

Generators
(2) 455 KW AC Generators Powered by (2) Cat 3456 Diesel Engines

Mud Pumps
(2) 1000 HP, 9P-100 Triplex powered by 3412 Cat Engines, Both Pumps have
an Allison Transmission driving them with 3 gears

Rotating & Traveling Equipment
National 27 ½” Rotary Table, Emsco 300 Ton Block, Gardner Denver SW-300,
5 ¼” x 42’ Kelly Varco HD Pin Drive Bushings

Blowout Prevention
13 5/8” 3000 psi Annular BOP, 13 5/8” 3000 psi Double Gate BOP, Koomey
Model 80 Gallon Automatic Accumulator, 5 Station Air Actuated Remote control
Panel, 4” & 3” 5000 psi Complete Manifold with Gauges and Chokes

Doghouse, Water & Mud Tanks
Heated Doghouse, (2) 10’ x 6’ x 40’ Mud Tanks Complete with (4) 5” x 6” Electrical
Driven Centrifugal Pumps, Manifold low pressure system with electrically driven
Mud Agitators, Mud Guns – 650 BBL Capacity

Handling Tools / Auxiliary Equipment
BJ 48” Type B Tongs, Pilot II Automatic Driller, Sure Shot 14 degree A-1 Survey
Instrument, MD Totco Type D weight Indicator

Drill Pipe & Drill Collars
12,000’ 5” OD 19.60# Drill Pipe, (21) 6 ¼” x 2 ¼” x 30’ Slick Drill Collars,
(6) 8” x 30’ Drill Collars, (3) 9” Slick Drill Collars

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

Drilling Rigs

---------------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Gardner Denver 700 Mechanical Drilling Rig
Used Mechanical Drilling Rig for Sale
Mechanical Drilling Rig - Gardner Denver 700 - For Sale
15,500’ Mechanical Drilling Rig for sale

---------------------------------------------------------------------------------------------------------------

Available for selling

Gardner Denver 700 Mechanical Drilling Rig for Sale
Contact Us
ID 1237
2400bhp Supply Vessel for Sale
Worldoils Marketplace
2400bhp Supply Vessel for Sale

Worldrigs ID: WR747

Supply Vessel For Sale
48M Supply Vessel For Sale - 2010 built

General :
Year of built : 2010

Main dimensions :
Length O.A : 48.00 m
Beam : 11.00 m
Depth : 03.50 m
Designed draft : 02.79 m
Max draft : 02.79 m
Gross / net tonnage : 495 / 149

Performance :
Speed : 11 knots
Endurance : 18 days
Power : 2 x 1200 bhp @ 1800 rpm (keel cooled)

Machinery :
Generator : 2 x 120 kW, 1 x 65 kW
Bow thruster : hrp 3001 tt @ 350 hp
Control : fwd & aft
Main engines : cummins KTA-38-M2

Deck machinery :
Bow anchor :
2 x 900 kg stockless anchor with 9 shackles anchor chain, electro hydraulic windlass
twin gypsy c/w 2 wraping heads c/w hydraulic electro power pack

Tank loading capacity :
Long range fuel : 204.0 mt
Fuel tank : 149 mt
Potable water : 55 mt
Domestic water : 192 mt
Deck area : 320 sq.mt
Dead weight : 520.9 tonnes
Displacement : 1026.8 t
Approx 1t ship : 506 mt

Navigation and communication :
Complied with GMDSS A3 for vessel < 500 grt
GMDSS hand held radio : 3
GPS : 2
Navtex 1 : 1
Magnetic compass : 1+1
VHF : 2
MF/HF/SSB radio : 1
Inmarsat c : 2
Radar : 1 x 48 nm range
Echo sounder : 1

Accommodations :
Fully air-conditioned : 22 berths
Crew complement : 10
Passenger : 12
LSA is for 22 men complement

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words(for official use only) -  
Supply Vessel for Sale
Offshore Supply Boat For Sale
48M Supply Vessel For Sale
2010 built Used Supply Vessel For Sale
2400bhp Supply Vessel For Sale

-------------------------------------------------------------------------------------------------------

 

Available for selling

Supply Vessel - 48M - For Sale
Contact Us
ID 747
Double bollards 98 Ton MBL for Rent
Worldoils Marketplace
Double bollards 98 Ton MBL for Rent

Worldrigs ID: WR2956

Double Bollards - For Rent
Double bollards 98 Ton MBL for Rent


Description :

Double bollards 98 Ton MBL for deck installation.
Finish : Sand Blast and Primar
MBL : 98t

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
98 Ton MBL Double Bollards - For Rent
Used Double Bollards - For Rent
Used 98 Ton MBL Double Bollards for Rent
98 Ton Double Bollards for Rent
Used Bollards for Rent
-------------------------------------------------------------------------------------------------------
Available for selling

Double Bollards - For Rent
Contact Us
ID 2956
Ingersoll-Rand T4W Drilling Rig for Sale
Worldoils Marketplace
Ingersoll-Rand T4W Drilling Rig for Sale

Worldrigs ID: WR758

Ingersoll-Rand T4W Drilling Rig for Sale
Drilling Rig - Ingersoll-Rand T4W - 1974 Built for Sale


Model : T4W Drill Rig
Manufacturer : Ingersoll-Rand
Year : 1974
Condition : Used

Description :

1974 Ingersoll-Rand T4W Drill Rig
Detroit V12 Diesel Deck Engine (inframe rebuilt)
IR HP 750 CFM / 250 Air Compressor
Water Injection Pump
Oil Injection Pump
Two Winch Lines
Carousel
36” Mast (Autofeed)
Pull Down & Pull Back
18” Table Opening
Worm Gear Top Head
Hydraulic Cooler
Rod Changer
Handles 4-½” x 25ft Drill Pipe
3 Outriggers
Complete Part & Service / Repair Manual
Breakout Wrench
Hydraulic Jib
Setup for AIR and MUD Drilling
Slow & Fast Rotation
Mounted on a CCC (Crane Carrier Company) Truck
Diesel Engine

Location : USA

Price & terms : Please enquire using the email form below.       

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Used Ingersoll-Rand Drilling Rig for Sale
1974 Built Ingersoll-Rand T4W Drilling Rig for Sale
Used Drilling Rig - Ingersoll-Rand T4W
Used Land Drilling Rig for Sale
Ingersoll-Rand Land drilling Rig for Sale in USA

-------------------------------------------------------------------------------------------------------

Available for selling

Ingersoll-Rand T4W Drilling Rig - For Sale
Contact Us
ID 758
GE 44MW LM6000 Power Plant (Parts) for Sale
Worldoils Marketplace
GE 44MW LM6000 Power Plant (Parts) for Sale

Worldrigs ID: WR1938

General Electric Power Plant Parts for Sale
LM6000 Power Plant Parts for Sale


Description :

Specifications CHP LM6000 PD – Ruien 7.
Package gasturbine : EGT
Boiler : brouhon

General data :
Brand : General Electric
Type : LM 6000 PD – NGD - G03 (dry low emission)
Fuel : Natural Gas
Power : 44 MW – 50 Hz
Serial Number : ESN192- 129

192-129
Comissioning 1998
Total OH 71.000
Last MO 2010
OH since MO 26000
Operational mode Mainly Baseload

Main parts :

Generator
Brand : GEC ALSTOM
Type : AG 225M185
Serial Number : P140211-10
Power : 48294 KVA
RPM : 1500 Rev/min
Voltage : 10500 V
Cooling : Air/water

Gearbox
Brand : GEC ALSTOM
Type : HSG800H
Serial Number : P15205801
Power : 52200 KW
RPM : 3615/1500 t/min

Start engine (hydraulic start system)

Natural gas reduction station
Inlet pressure : max. 80 bar
Outlet pressure : 42 bar

Small components
Lube oil generator/gearbox
lube oil LM6000

Washing skid LM6000
CO2-bottles

DCS / fuelmetering valves
- Woodward Netcon – Pentium CPU
- 1 HMI operating station
- Software Ifix version 4.0, USB software key version 5.1
- Woodward Fuel regulating valves – 
3 Valve system 3103 Valves with EM35 actuator & EM35 Driver

Gas and fire detection panel + Vibration monitoring “Bentley Nevada 3300”

MCC cabinets
400 V cabinets
HV-cabinets
Woodward cabinet
Generator cabinets
No-break cabinets

Boiler
Manufacturer : Brouhon
Serial Number : 2382
Year : 1997
Preheater (max pressure, max. temp.) : Pressure: 35 bar – temp. in: 
75°C – temp. out: 195°C

Economiser (max pressure, max. temp.) : Pressure: 60 bar – temp. in: 
195°C – temp. out: 278°C

Drum (max pressure, max. temp.) : Pressure: 41,5 bar – temp. 253°C; 
evaporator: 303°C

Evaporator (max pressure, max. temp.) : Pressure: 41,5 bar – temp. 
in: 253°C – temp. out 303°C

Superheater (max pressure, max. temp.) : Pressure: 41,5 bar- temp. 
in: 303°C – temp. out 500°C

Tube bundle: 520°C
Post combustion : NO
Running hours : 45.000 h

Included in scope
- Circulation pumps boiler
- Feedwater pump
- Measurements fluegas
- Control system boiler
- Oil cooling loop. (heat exchangers, pumps, ….)
- Air compressor.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) -

44MW LM6000 Power Plant Parts for Sale
General Electric Power Plant Parts for Sale
Parts Of Power Plant for Sale
GE 44MW LM6000 Power Plant (Parts)
General Electric 44 MW – 50 Hz Plant Parts
---------------------------------------------------------------------------------------------------------

Available for selling

GE 44MW LM6000 Power Plant (Parts) for Sale
Contact Us
ID 1938
Modern Pipe-Lay Barge for Sale
Worldoils Marketplace
Modern Pipe-Lay Barge for Sale

Worldrigs ID: WR678

Pipelay Barge for Sale
292 men Pipelay/Diving Barge for Charter or Sale
Modern Pipe-Lay Barge for Sale
Pipelay Barge for Sale - 2008 built


Principal Particulars :
Class : ABS +A1 unrestricted service with MODU code attestation
Built : 2008

Gross Tonnage : 11,133 T
Max Draft Wt : 16,873 T
Light Ship : Wt 6,640 T

Dimensions :
Length overall : 111.63m
Breadth Moulded : 31.7m
Depth : 9m
Designed Draught : 4.8m

Machinery :
Generators :
5x Mitsubishi
1200 kva 60 cycle.

Emergency Generator :
1 xDiesel Caterpiller
500 kva 60 cycle

Tank Capacities :
Fuel Oil : 2211cbm
Potable Water : 1926 cbm
Grey Water : 23 cbm
Black Water : 23 cbm
Bilge : 23 cbm
Dirty Oil : 27cbm
Cooling Water : 750 cbm

Pumps :
Fire/General Service : 2 x 130 cbm hr 80m head
Fuel Oil : 2 x 20 cbm hr 30m head
Ballast Water : 2 x 300 cbm hr 30m head
Potable Water : 1 x 120 cbm 3hr 35m head
Domestic F Water : 1 x 30 cbm hr 35m head
Domestic S Water : 1 x 30 cbm hr 35m head
Emergency Fire : 1 x 50 cbm  55m head

Deck Area :
Clear deck area over 2000sqm
Deck Strength 12.5t/sqm rating
Carriage Capacity over 11,000 tons
Provision ondeck for suitable crawler crane

Pipelaying Facilities :
Pipelay Equipment
Pipelay capability for 200mm to 1500 mm
90 ton pipe lay tensioner capacity (30m/min)
100 ton pipe lay abandonment / recovery winch
Automatic tensioner transfer system
Pipelay conveyor and transfer system rated to 32 ton
7 welding stations with semi-automatic welding system (STT & flux core)
1 NDT station
2 field joint stations
Dark Room

Stinger/Ramp
3 degree sloping production firing line
34m outrigger stinger adaptable to different project requirements

Accommodation :
High Standard of Accommodation
Tank Top Cabins : 30 x 2 = 60
Tween Deck Cabins : 30 x 2 = 60
Deck 1 Cabins : 24 x 2 = 48
Main Deck : 1 x 2 = 2
Deck 2 Cabins : 32 x 2 = 64
Deck 3 Cabins : 28 x 2 = 56
Additional Deck : 3 Cabins 2 x 1 = 2
Total Berths : 292
Cabins with en-suites and fully air conditioned
In-built moon-pool (5.5m x 5.5m)
Support services for modular saturation diving spread

8 Point Mooring System :
8 x single drum 90 ton mooring winches
c/w tensional sensor,wire length counter
8 fairleads, with 1500m of 52mm wire rope.
9 x 10 ton Delta Flipper anchors
9 x Pennant Buoys

Helideck :
Size: 22 x 22m for Sikorsky S61

Safety Systems :
Mass Evacuation Slide and Raft System
Life rafts to 590 person capacity
600 life jackets/12 life rings
1 x fast rescue boat
Active high specification smoke and fire monitoring and
extinguisher system in all accommodation, engine, winch,
paint and boiler rooms
Sprinkler system
Machinery guarding systems
Dedicated boat landing transfer points

Environmental :
Sewage treatment system meeting MARPOL standards
Spill prevention systems

Other Facilities :
Hospital with 2 beds
Well equipped galley
Mess room with seating for 180 people
Large cinema, TV room for 110 people
Recreational Room for 60 people seating
Internet and email room
Well equipped gym

Laundry and large food storage facilities
5 Specialist Personnel Office rooms
2 Client office rooms
3 General office rooms
2 Control rooms with CCTV and metering
Navigation /Radio Control room with helicopter coms
Conference room for 25 people

Prayer room
Paramedic room
Change room with lockers and wash facilities
Work shop with Lathe, Drill press plus other tooling
2 water makers of 40 ton per day capacity

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------
Search words(for official use only) -
Pipelay Barge for sale
Pipelay/Maintenance and Accomodation Barge
292 men Pipelay Barge for Charter
Barge for Charter
Diving and Maintenance Pipelay Barge for Charter
Pipelay Barge for sale - 2008 built
2008 built Pipelay Barge for Charter or Sale
Accomodation Barge for Sale and Charter

---------------------------------------------------------------------------------------

Available for selling

Pipelay/Diving Barge for Charter or Sale
Contact Us
ID 678
Drilling Rig - Schramm T450W RC - For Sale
Worldoils Marketplace
Drilling Rig - Schramm T450W RC - For Sale

Worldrigs ID: WR2736

Schramm T450W RC Drill Rig & Support Package for Sale
Drilling Rig - Schramm T450W RC - For Sale


Model : T450W RC Drill Rig
Manufacturer : Schramm
Condition : Used

Description :

Schramm T450W RC Drill Rig & Support Package
Reverse Circulation (set up for mineral exploration)
Cummins 200HP Diesel Engine (powers the hydraulic system)
1000 ft includes & handles 20ft x 6"
Extendable rod rack
Rod handling Boom and winch
Wireline winch
2 water injection pumps
Remote hydraulic cooler
Angle/Dump mast
Auto Blowdown
Cyclone
Rods, hammers, spare parts
3 leveling jacks
Mounted on a Ford Truck 6x4
Diff Locks

Note: All parts for compressor that was removed from drill

Also Available as part of the package:
Sullair Compressor 900HX & CAT 15 Diesel Engine
Sullair Compressor 750cfm/350psi DUX & Series 60 Diesel Engine
BM10179 Hurricane Air Booster 4T-276-41B (rated 1400cfm/1000psi)
BM10214 Hurricane Air Booster 4.5T 276-41B (rated 1400cfm/1000psi)
Chevrolet Model : Kodiak
Drill Rods : Metski Drill Rods : 10 | Remet Drill Rods : 29 | Remet Drill Rod Inner Tube : 29
Sample Splitter (Dry) : 2 each
Sample Splitter (Wet) : 1 each
Sullair Air Compressor DC 815/350 C19
20 foot shipping container with alot of parts included

Location : North America

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Used Schramm T450W RC Drilling Rig for Sale
Schramm T450W RC Drilling Rig for Sale
Used Schramm Drilling Rig for Sale
Schramm T450W RC Land Drilling Rig for Sale
Schramm T450W RC Used Land Drilling Rig

-------------------------------------------------------------------------------------------------------
Available for selling

Schramm T450W RC Drill Rig & Support Package - For Sale
Contact Us
ID 2736
23M Landing Craft for sale in Australia
Worldoils Marketplace
23M Landing Craft for sale in Australia

Worldrigs ID: WR1257

Landing Craft for Sale
23M Landing Craft for Sale - Newbuilt
Newbuilt Landing Craft for sale - Built in Australia


Particulars
Length O.A : 23.75m
Beam (mld) : 7.80m
Depth (mld) : 1.60m
Survey : 2C - 12 passengers + 3 crew

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Landing Craft  - Newbuilt for sale
23M Landing Craft - Built in Australia - For sale
23m Landing Craft for sale - Built in Australia
New 23M Landing Craft
Newbuilt Landing Craft in Australia for Sale
---------------------------------------------------------------------------------------------------------------


Available for selling

Landing Craft - Newbuilt 23m for Sale
Contact Us
ID 1257
Oil and Gas Forecast - Deepwater Survey report for Sale
Worldoils Marketplace
Oil and Gas Forecast - Deepwater Survey report for Sale

Worldrigs ID: WR913

Name of the Report :
The World AUV Market Report 2012 - 2016

Contents

1 Executive Summary ......15
1.1 Introduction .......16
1.2 The Market......17
1.3 A Growing Aceptance .........18

2 Introduction ........21
2.1 Unmanned vehicles ........22
2.2 Unmanned vehicles in the marine sector ......23
2.3 AUV Rationale ........25
2.4 What are the alternatives to using AUV?.........26
2.5 AUV Types.............30
2.6 Significant Points in AUV History .........34

3 AUV Applications .........37
3.1 Overview ...........38
3.2 Commercial Survey .......40
3.3 Light Intervention .........53
3.4 Inspection..........55
3.5 Military Applications .........58
3.6 Research Applications ..........73

4 AUV Technology ........83
4.1 Introduction ..........84
4.2 Autonomy and Control ..........85
4.3 Communications .........89
4.4 Hull Shape, materials and buoyancy ...........93
4.5 Launch and recovery systems .........97
4.6 Navigation and Positioning .........98
4.7 Power .........103
4.8 Propulsion and Manoeuvring ........107
4.9 AUV Sensors .........108

5 Market Forecasts .......117
5.1 AUV market drivers .........118
5.2 The existing AUV fleet .........121
5.3 The model – a scenario approach .........124
5.4 Oil & Gas Sector Forecasts – Deepwater Survey (Units) .........125
5.5 Oil & Gas Sector Forecasts – Deepwater Fields (Units) .......126
5.6 Oil & Gas Sector Forecasts – Pipeline Inspection (Units) .......127
5.7 Hydrographic (Units) .........128
5.8 Research (Units) ...........129
5.9 Submarine Cables (Units)........130
5.10 Military (Units) ........131
5.11 Totals (Units) ..........132
5.12 Totals (Units & Values) ..........133

6 Appendices ........135
6.1 Summary Tables ........136
6.2 AUV Developers & Manufacturers ........140
6.3 Academic Developers and Operators .......144
6.4 Operators .........147
6.5 Technology Providers .........148
6.6 AUVs ...........151
6.7 Gliding AUV .........189
6.8 MCM vehicles with an FO link .........191
6.9 AUV and USV programs in the US military .........194

Figures
Figure 1: Most Likely (Units) ...........17
Figure 2: Most Likely (Value) .........17
Figure 3: Big Dog ..........22
Figure 4: Dragon Runner ...........22
Figure 5: MQ-9 Reaper UAV ........22
Figure 6: Unmanned Underwater Vehicles Family Tree ........23
Figure 7: Protector USV .........24
Figure 8: Dorado/SeaKeeper USSV ..........24
Figure 9: Deep Flight 1..........26
Figure 10: Commercial Diver .........26
Figure 11: The original JIM atmospheric diving suit .........26
Figure 12: Hydro Products RCV225 and RCV125 (1980) ........27
Figure 13: Serpent Internal Pipeline Inspection ROV ........27
Figure 14: The Fugro Discovery offshore survey vessel .....28
Figure 15: Hull mounted SBP profiler .......28
Figure 16: Tees Navigator .......28
Figure 17: SM-30 Sonar mapping System .........28
Figure 18: AUV running a typical survey line pattern ...........29
Figure 19: Airborne laser mapping System ......29
Figure 20: MH-53E Sea Dragon helicopter towing a magentic influence sled.........30
Figure 21: Slocum Glider ..........30
Figure 22: Slocum Glider .........30
Figure 23: The Autonomous Inspection Vehicle (prototype) ........31
Figure 24: Screenshot of the VisualWorks inspection data integration software ......32
Figure 25: ALIVE AUV Approaching Wellhead .........32
Figure 26: Research vessel Polarstern ..........34
Figure 27: SPURV 1 ........34
Figure 28: Submarine deployed, weaponised Manta AUV – the future? ........35
Figure 29: Artists impression of an Inspection AUV ..........38
Figure 30: SAUVIM Intervention AUV ..........39
Figure 31: SeaBED AUV on an Archeological dive in the Aegean Sea .......39
Figure 32: Unmanned Semi-Submersible survey vehicle...........41
Figure 33: SMB Nesbitt of the Royal Navy Hydrographic fleet .......42
Figure 34: Dorado USSV on trial with the Canadian Navy ..........42
Figure 35: Jetswath survey vehicle ...........43
Figure 36: Modules on the Gavia Offshore Surveyor AUV ..........44
Figure 37: Harbour and dredged channel bathymetry data collected by the Gavia
Offshore Surveyor .......... 44
Figure 38: The working end of a cutter-suction dredger ...........45
Figure 39: Example screenshot of the MakaiPlan GIS ........46
Figure 40: Telecommunications cables in the Mediterranean ........47
Figure 41: Aqua Explorer 2000 AUV used for cable route surveys ......47
Figure 42: Catenary and Taut-Leg Mooring arrangements .......48
Figure 43: The Maersk Inspirer jack-up platform underway to the Volve Field .......49
Figure 44: Lunar Energy/Rotech Tidal Turbine farm ..........49
Figure 45: The Hywind floating offshore wind turbine being installed in 2009 .......49
Figure 46: The Peace in Africa diamond mining vessel .........51
Figure 47: The DBM Geosurvey M600 AUV ........51
Figure 48: Gas Hydrate Observatory .........52
Figure 49: Recovery of the Eagle Ray AUV ...........53
Figure 50: Nodules off New Zealand ......53
Figure 51: OKPO-6000 .........53
Figure 52: Swimmer AUV ........54
Figure 53: Subsea Christmas Tree valve assembly .............54
Figure 54: Planned layout of the Reliance field, offshore India ......54
Figure 55: MacArtney Focus 2 ROTV ........55
Figure 56: Inspection ROV with Xplisit camera system (inset) .......55
Figure 57: Major Pipelines in the North Sea ........56
Figure 58: Geosub .........56
Figure 59: Alistar 3000 tracking pipeline during trials in 2004 .....56
Figure 60: The Seawolf-A Inspection AUV ............57
Figure 61: The prototype Autonomous Inspection Vehicle ......57
Figure 62: ROV view of tracking a moving riser during trials ........58
Figure 63: Different pipelay methods .............58
Figure 64: U212 AIP submarine .........59
Figure 65: SLITA array and the Ocean Explorer AUV in 2008 .......60
Figure 66: Liberdade/XRay Glider ........60
Figure 67: Submarine deployed PLUSNet modules .........61
Figure 68: Influence seabed mines (blue) and a floating contact mine (black) discovered
on an Iraqi vessel in 200 .......61
Figure 69: The Saab AUV62 ......62
Figure 70: Remote Multi Mission Vehicle with SSS Towfish ........62
Figure 71: ASV 6000 SASS Q (ASV)........63
Figure 72: Dorado (DDRC-Canada) ..........63
Figure 73: Transphibian AUV ..........63
Figure 74: REMUS 100 .........63
Figure 75: Seafox EMDV .............64
Figure 76: Stanflex 100 USV with MCM SSS towfish (yellow) ......64
Figure 77: AUV CTD card .........65
Figure 78: Hydrographic chart for the 1944 D-Day beach landings .........66
Figure 79: Daurade AUV ...........66
Figure 80: Bushell’s Turtle .........67
Figure 81: British X-Craft midget submarine ........67
Figure 82: Italian manned torpedo ........67
Figure 83: X-class USV ..........67
Figure 84: Sea Owl Mk 2 USV .........67
Figure 85: Hovering AUV (showing thrusters, DVL and camera system) .......68
Figure 86: Dry-deck shelter ..........69
Figure 87: Saab SUBROV ........70
Figure 88: SeaOwl 500 .........70
Figure 89: The Kamen K-Max helicopter.........70
Figure 90: Lockheed Martin Mule UGV .........70
Figure 91: ASV SASS-Q ........71
Figure 92: ASV-9500.........71
Figure 93: X-3 .......71
Figure 94: Drug-running submarine captured by the Columbian Navy .......71
Figure 95: REMUS 100 fitted with an extandable surveillance camera .......71
Figure 96: The Running Gear Entanglement System ..........72
Figure 97: MK 30 Mod 2 ASW target (helicopter recovery) .......72
Figure 98: The winning team (Heriot-Watt University) at SAUC-E 2009 ........73
Figure 99: T and S data gathered by a Gliding AUV off Newfoundland in 2006......74
Figure 100: Data density gathered by gliding AUV (left) vs surface vessel .....74
Figure 101: Microstructure sensor on the SAMS REMUS 600 AUV ......75
Figure 102: Upwelling ...........76
Figure 103: Glider deployment ...........76
Figure 104: The two modes of the NEREUS AUV .......76
Figure 105: Summary of UNCLOS definitions .........77
Figure 106: Tuvaaq AUV..........78
Figure 107: Odyssey AUV (Lake Winnepasauke, New Hampshire) ........78
Figure 108: Wally the seabed crawler in test .........79
Figure 109: Fisheries echogram gathered by a HUGIN AUV .......80
Figure 110: Hydroid REMUS 100 AUV schematic ........84
Figure 111: MIT Odyssey IV AUV schematic (plan view) .........84
Figure 112: Marport SQX-1 AUV schematic ...........85
Figure 113: Control system hardware (without pressure casing) ...........85
Figure 114: AUV control processes and behaviours ..........86
Figure 115: A stuck REMUS 600 and a manipulator equipped LBV150 ROV ......86
Figure 116: VectorMap Screenshots showing image overlays ........87
Figure 117: SeeByte SeeTrack Military CAD/CAC module (integrated into the AUV) .... 88
Figure 118: SeeTrack Military screenshot showing MCM line plan and pre-acquired SSS
imagery .........88
Figure 119: Kongsberg Hugin operation and navigation screens ........89
Figure 120: Hydroid VIP screenshot .........89
Figure 121: Teledyne Benthos Acoustic Modem ........91
Figure 122: Wireless Fibre Systems SeaTooth modem.......91
Figure 123: The TILAC through-ice radio system concept .......92
Figure 124: Doppler shift as seen from Argos satellites........93
Figure 125: Sonobuoy launch tubes on a P-3 Orion marine patrol aircraft .......93
Figure 126: Seahorse AUV ..........93
Figure 127: Deep-C AUV ..........94
Figure 128: Autonomous Benthic Explorer ........94
Figure 129: Glass pressure sphere placement in the Kermonaut AUV .......94
Figure 130: Iver2 AUV ...........94
Figure 131: The nose section and interior components of a REMUS .....95
Figure 132: Titanium blanks prior to machining for the REMUS 3000 .....95
Figure 133: Forward section of the Autosub 6000 AUV .......95
Figure 134: Nereus AUV showing some of its 1,600 ceramic buoyancy spheres ......96
Figure 135: SMA actuator deformed (left) and returned to its original shape (right) ....96
Figure 136: Deployment of a Hugin 1000MR from a Norwegian naval vessel ......97
Figure 137: LARS options for the REMUS 6000 (left) and 600 (right) ........97
Figure 138: Launch and Recovery cradle for an Iver2 .........98
Figure 139: Eurodocker .......98
Figure 140: Iver2 (EcoMapper variant) ........98
Figure 141: T24 Ring laser gyro INS ......99
Figure 142: PHINS 6000 INS ............99
Figure 143: Sea Devil DVL & INS ...........99
Figure 144: NavQuest 600 Micro DVL .........99
Figure 145: HAUV performing a vertical slice hull inspection ........100
Figure 146: Remus Gateway Buoy ..........101
Figure 147: GIB-Plus Buoys ........101
Figure 148: Micron USBL (500m range) .......102
Figure 149: HIPAP USBL (5000m range) .........102
Figure 150: IUSBL transducer (left) and beacon (right) .....102
Figure 151: NASNet VRx unit (left) and Station (right)............103
Figure 152: Mini Intelligent Pressure Sensor .........103
Figure 153: Autosub 6000 battery box containing lithium-polymer cells ....104
Figure 154: Odessey IV Battery Pack (out of pressure sphere) .......104
Figure 155: Mesa Systems CAN120 12V inductive power transfer system .....105
Figure 156: SAUV II ........... 106
Figure 157: AE1 Diesel engine ...........107
Figure 158: 370B Diesel Engine (370 HP) .......107
Figure 159: IntegratedThruster (rim drive) .......107
Figure 160: Bionik Manta in tank tests .......108
Figure 161: Dual port camera system on a Iver2 AUV ........109
Figure 162: Imagery of Amphora collected using the Seabed AUV ......109
Figure 163: 3-Axis RS232 digital compass, less than 3cm per side ........110
Figure 164 SM2000 Imaging Sonar .......110
Figure 165 7128 Imaging Sonar .........110
Figure 166 Blueview DF900-2250 ..........110
Figure 167 DIDSON ..........110
Figure 168: Imagery from a Tritech Super SeaKing OAS ......111
Figure 169: SeaKing SS hardware and imagery ......112
Figure 170: The muscle AUV with acoustically transparent panels ......112
Figure 171: Real-time SAS SSS processing screens ......112
Figure 172: Sub-bottom profiler data (24kHz) .........113
Figure 173: 3D CHIRP SBP on an Atlas SeaOtter AUV .........113
Figure 174: 50m penetration AUV SBP...........113
Figure 175: Reson 7125 200/400kHz SBS (top left) on a Saab Double Eagle AUV .... 114
Figure 176: SBS bathymetry from SRDUK / Tritech .........114
Figure 177: Data acquisition screenshot for Atlas Fansweep 30 SBS (200/400kHz) ... 114
Figure 178: HUGIN 3000 with Kongsberg SBS .........115
Figure 179: GeoSwath-Plus transducers on a REMUS 100........115
Figure 180: AquaExplorer 2000 ..........116
Figure 181: World Offshore Oil & Gas Expenditure ........119
Figure 182: World Deepwater Oil & Gas Expenditure .......120
Figure 183: World AUV Population by Size & Application ........121
Figure 184: World AUV Population – Numbers Built by Water Depth .......122
Figure 185: Oil & Gas – Deepwater Survey (Units) ........125
Figure 186: Oil & Gas – Deepwater Survey (Units) .......126
Figure 187: Oil & Gas – Pipeline Inspection (Units) ........127
Figure 188: Oil & Gas – Pipeline Inspection (Units) .......128
Figure 189: Research (Units) ............129
Figure 190: Submarine Cables (Units) ..........130
Figure 191: Military (Units) ......131
Figure 192: Low Case (Units by Market Sector) ..........133
Figure 193: Most Likely (Units by Market Sector) ........133
Figure 194: Most Likely (Units by Market Sector) .........134
Figure 195: 475 AUV .............151
Figure 196: Autonomous Benthic Explorer ..........151
Figure 197: ALISTAR 3000 AUV .............152
Figure 198: ALISTER AUV (shore launch) ...........152
Figure 199: ALIVE .........153
Figure 200: APOGEE ..........153
Figure 201: Aqua Explorer 1000 .........154
Figure 202: Aqua Explorer 2 (AE-2) .........154
Figure 203: Aqua Explorer 2000 ...........154
Figure 204: Theseus (right), ARCS (centre), Explorer (left) ......154
Figure 205: ARIES .............155
Figure 206: Testing the SASS 6m Mk 2.........155
Figure 207: Prototype AIV trials and concept ............156
Figure 208: AUSS ............156
Figure 209: Images from AUSS .............156
Figure 210: ASM-X Demonstrator ...........157
Figure 211: CL1 Target AUV .........157
Figure 212: Autosub-1 .........157
Figure 213: Autosub 2 .........157
Figure 214: Autosub 6000 .........158
Figure 215: AUV62 (Sapphire) ..........158
Figure 216: AUV 62 Submarine Training Target ..........158
Figure 217: Bluefin-9 ...........159
Figure 218: Bluefin 12.......159
Figure 219: Bluefin-21 BPAUV on the LCS and during deployment .......160
Figure 220: Echo Mapper 2 ...........160
Figure 221: SSS (left) and SBS (right) data collected by the Echo Mapper ......160
Figure 222: CETUS-1 (left), and CETUS-2 (right) .......161
Figure 223: Cormoran........161
Figure 224: CR-02 under test in 2006.......161
Figure 225: C-Scout...........162
Figure 226: DeepC .........162
Figure 227: DepthX (ENDURANCE variant) .........163
Figure 228: Dorado .........163
Figure 229: Docking variant ..........163
Figure 230: Dorado ............164
Figure 231: Double Eagle Mark 3 SAROV with PROSAS .........164
Figure 232: Echo Ranger (LDUUV) ..........165
Figure 233: Extendable mast ......165
Figure 234: AsterX .............165
Figure 235: Fetch 3.5 .........166
Figure 236: NNEMO 1.........166
Figure 237: FOLAGA .......166
Figure 238: Gavia .......167
Figure 239: Geosub ...........167
Figure 240: Bluefin HAUV .........168
Figure 241: HUGIN 1000 on the aft deck of the Karmy MCM vessel ........168
Figure 242: HUGIN aluminium/oxygen fuel cell battery .......169
Figure 243: Infante .............169
Figure 244: Iver2 ...........170
Figure 245: Light AUV ..........170
Figure 246: LMRS Launch & Recovery Trials ........171
Figure 247: MACO (left) and Manta (right) ..........171
Figure 248: Marine Bird...........172
Figure 249: Marum MOVE .......172
Figure 250: MARV ...............172
Figure 251: MAUVE ..........172
Figure 252: MRUUV ..........173
Figure 253: MR-X1 ................173
Figure 254: Nereus (AUV mode) and LED array ............174
Figure 255: Nereus manipulator and deployment (ROV mode) ........174
Figure 256: Odyssey IV on a public relations mission ........174
Figure 257: R-One Robot .............175
Figure 258: R2D4 ............175
Figure 259: Ranger ...............175
Figure 260: Rauver Mk 2 ........176
Figure 261: Redermor 2 .........176
Figure 262: ONR REMUS 100 thruster modules .............177
Figure 263: REMUS 100 ............177
Figure 264: REMUS 100 with external turbulence measurement sensors .......177
Figure 265: REMUS 600 Standard Configuration ........178
Figure 266: REMUS 600 (with SAS, extra battery packs and fin modules) .....178
Figure 267: SAMS / REMUS 6000 ..........179
Figure 268: RHyVAU Contueor ............179
Figure 269: RMS/RMV ...........180
Figure 270: RMMV components ........180
Figure 271: ASQ-20 towed MCM system ...........180
Figure 272: SAILARS .........181
Figure 273: SARA AUV ............181
Figure 274: SAUV Mark 2 ..........182
Figure 275: SAUVIM ......182
Figure 276: Seabed .........183
Figure 277: SeaHorse.........183
Figure 278: SeaOtter Mark 2 ........184
Figure 279: SeaWolf A variant ..........184
Figure 280: Sentry AUV meets the Alvin manned submersible ..........185
Figure 281: SWIMMER operational concept ...........185
Figure 282: The SWIMMER ROV component ............186
Figure 283: Talisman M ............186
Figure 284: Talisman L ..............187
Figure 285: Tantan ..........187
Figure 286: Tri-dog 1 ..............187
Figure 287: Tuvaaq...............188
Figure 288: Xray/Liberade Glider prototype ............189
Figure 289: SeaExplorer ..........189
Figure 290: SeaGlider.................190
Figure 291: Slocum Glider ............190
Figure 292: Spray Glider .............191
Figure 293: Archerfish after deployment from launching cradle ........... 191
Figure 294: K-Ster ...............192
Figure 295: Minesniper ................192
Figure 296: SeaFox ..............193
Figure 297: Transphibian ...............193

Tables
Table 1: Most Likely (Units & Values) .............17
Table 2: Most Likely (Values) ..............18
Table 3: Summary of IHO S-44 Minimum Standards ...........40
Table 4: Summary of IMCA S-003 Minimum Standards ............48
Table 5: Comparison of Underwater Modem Systems ...........90
Table 6: Power Sources for Deepwater AUVs ................104
Table 7: World AUV Population by Models and Units Built ...........121
Table 8: World AUV Population by Units & Application ...........122
Table 9: Applications of the 36 Models of Military AUVs..........122
Table 10: World AUV Fleet by Manufacturer ..........123
Table 11: Oil & Gas – Deepwater Survey (Units by Size) ..........125
Table 12: Oil & Gas – Deepwater Survey (Units by Size) .........126
Table 13: Oil & Gas – Pipeline Inspection (Units by Size).........127
Table 14: Hydrographic Survey (Units by Size) ..........128
Table 15: Research (Units by Size) ........129
Table 16: Hydrographic Survey (Units by Size) ..........130
Table 17: Miitary (Units by Size) ...........131
Table 18: Total AUVs (Units by Region) ................132
Table 19: Total AUVs (Units by Market Sector) ............132
Table 20: Summary Table of AUV actively used or under development for Survey,
Inspection and Research ...........136
Table 21: Summary Table of AUV actively used by military organizations or developers ......137
Table 22: Summary Table of ASW Training Targets .........139
Table 23: Summary Table of Gliding AUV ............139
Table 24: Summary Table of Expendable Mine Destructor Vehicles (EMDV) ......139

2 An Introduction to Unmanned Underwater Vehicles

Requirements – there are now AUVs that are capable of hovering and so have thrusters
that provide vertical as well as horizontal motion control. Some AUVs have multiple hulls
for maximum stability and are used as camera platforms, some have no thrusters at all
and travel forwards using a gliding motion and others have propulsion systems based on
biological mechanisms such as eels, snakes and manta-rays (bio-mimetic systems).

In order to present the most streamlined design, sensors used on AUVs are normally
integrated into the body of the vehicle. This requires a high degree of co-operation at the
design stage between sensor and vehicle developers. Some AUVs utilise a modular
approach that allows for some variation of sensor payload and battery capacity between
successive dives and this approach can also assist in the systems design process.
However, there are no modular systems currently available that would add hover
functionality.

2.3 AUV Rationale
AUVs use can be justified for specific projects in a number of ways related to access,
safety, data quality and survey costs. Benefits include:
• Operation in deep, shallow and restricted waters where vessels may not be
allowed, dependant on the depth rating of their systems.
• Deployment can be from the shore or a minimally equipped, low-cost vessel
that is then free for other work.
• The range of an AUV is limited by its power supply, not by the length of an
umbilical.
• There can be multiple AUVs used from the same vessel at the same time, all
communicating between themselves or via the host vessel. They can share
tasks and information, making decisions based on each others progress, power
consumption or operational faults.
• Vessel requirements are reduced for deep-water operations – a deep-tow cable
or ROV umbilical and their associated handling gear impose a minimum size
constraint on a ship as compared to an AUV. The smallest deep-ocean AUV in
development can be operated from virtually any seaworthy vessel. ROVs are
typically operated from vessels equipped with Dynamic Positioning (DP)
systems – AUVs do not require this.
• Topside control/operations equipment is greatly reduced in comparison with
ROVs – a laptop computer may be all that is required to programme the vehicle
and to down-load survey results on its return.
• AUVs do not require a number of highly skilled operators to control and monitor
their movements and the data they collect. In the case of pipeline inspection or
surveys, (a task normally accomplished by an operator flying an ROV over a
pipeline and observing video images and corrosion data), the AUV can
manoeuvre itself in relation to the pipeline, maintain distances and a position to
provide optimum geometry for the sensors and perform inspection routines in
response to anomalous events or objects being detected.
• De-risking MCM missions, both in terms of removing the need for divers to
dispose of moored or buried mines and in operating well ahead or to the side of
a vessel performing a mine detection operation.
• De-risking ASW missions by acting as a sensor platform remote and distant
from manned vessels.
• Increase data quality by providing a stable platform free from the effects of
waves and weather. Apart from launch and recovery, AUV operation is
independent of surface wind and wave conditions – an ROV normally operates
from a DP vessel that may use a heave-compensated winch to minimise the
effect of surface motion on the ROV. The independence of the AUV can lead to
a reduction in weather/vessel motion-induced data problems.
• Increase data quality by optimising the altitude of the vehicle for the sensors
without a towed sensor platform.
• De-risking survey operations – in a deep-tow survey operation the altitude of
the platform is controlled by winch tension and the platform is often very slow to
respond to commands related to the imminence of an undersea ridge or
change in gradient that can cause either an impact. The AUV can react to
obstacles and changes in bottom topography and maintain optimal altitude both
up and down slope.
• Improved survey speeds – typical surface vessel survey deep-tow tow speeds
are limited by the drag from the cable to the order of 1 or 2 knots, as compared
to AUV speeds of typically between 3 and 4 knots.
• Vessel turns between adjacent survey lines is a highly costly procedure for a
deep-tow system, requiring several kilometres for sleds and towfish as
compared to turn radii for AUVs that can be less than 10 metres. A survey in
deep water (3,000m) that requires a towfish to be flown 200m above the
seabed may require a cable length from the vessel of the towfish of 5,000m or
more. To turn from one survey line to another the vessel may take 2 or more
hours to get the towfish in the line start position – depending on speed. Line
run-ins are also added in excess of the required line distance to give the towfish
and cable time to settle back to depth and be stable on the line. If the towfish is
too high, or not within the contractually allowed corridor each side of the survey
line, the turn may have to be repeated.

3 AUV Applications

3.1 Overview
In discussing applications for AUVs, it is sometime useful to think of the vehicle as a
platform to which sensors are attached. It is the combination of these sensors and the
physical capabilities of the vehicle (depth rating, speed, endurance, hovering) that will
determine the applications to which it can be put. The vast majority of AUVs are
designed to meet the needs of a single or small group of applications, as this is often
more successful than attempting to develop a system that can meet a multitude of
applications as compromises are inevitable. Some AUVs are available purely as a base
unit with a control system that is open source and configurable by the user to suit their
needs. Others can be supplied with an empty module (but with power and data
connections) that allows the user to fit their own sensor(s) to the main vehicle. AUV
suppliers are normally highly capable and flexible, and are often keen to explore new
potential applications for their vehicles. However, early contact is often advisable,
especially if there is a need to integrate a new sensor or system.

AUV applications are generally grouped into those related to the commercial, military
and research sectors, but the same vehicle can normally be used for more than one
application and in more than one sector. At the time of writing, the commercial sector
appears to require a small number of high value vehicles, the military requires a large
number of vehicles at the very high to mid value range, and the research sector uses a
small number of high value vehicles and a large number of mid and low value vehicles.
Possible application groupings include :

Commercial
• Light Intervention
• Pipeline and Structure Inspection
• Survey and Seabed Mapping

Military
• Anti Submarine Warfare
• Mine Counter Measures
• Rapid Environmental Assessment
• Rescue and Recovery
• Security & Surveillance

Research
• Geophysical and oceanographic studies
• Biological and ecological studies
• Environmental Mapping and Surveillance

In the commercial sector, survey and seabed mapping is the primary application of
AUVs to date, with a number of major survey contractors having fleets of typically deepwater
(>1,000m), torpedo-shaped AUVs providing data for oil and gas clients as well as
national hydrographic departments. Shallow water survey is also undertaken by AUVs
(with depth ratings between 500 and 1,000m) in the commercial sector, and this is of
relevance to a large proportion of the oil and gas real-estate in the Gulf of Mexico, North
Sea and elsewhere.

AUVs are used to survey the routes of potential pipelines and cable-routes, but the
inspection of existing cables and pipelines has been conducted by only a few vehicles
on a test-bed/proving basis. Once various gaps in the technology are successfully filled,
pipeline and subsea inspection will be a major AUV application, and this has been
recognised by major industry players such as Total, BP and Chevron. Notable pipeline
and cable inspection trials include:

• Aqua Explorer-2 [Cable inspection, Taiwan Strait, 1999]
• Alistar 3000 [Flowline inspection, BP King Field, Gulf of Mexico, 2006],
• Geosub [Pipeline inspection with AutoTracker, Scapa Flow 2005, and BP,
Clair Field, West of Shetland, 2006]

8,000km of pipelines including the 1,160km Langeled pipeline.8 A number of other large
pipeline projects are planned or underway in the region including the 1,220km Nord
Stream pipeline through the Baltic Sea, the 80km Baltic Connector and the 260km Baltic
Pipe. The Gulf of Mexico has over 22,500km of oil and gas pipelines.

In waters that are inaccessible to surface vessels due to depth or access, AUVs offer an
effective means of gathering pipeline inspection data, far beyond the physical range of
divers operating from the beach. A number of small AUVs (including the LIRMM TAIPAN
2, the Oceanscan-MST LAUV, the Hafmynd Gavia, the Hydroid REMUS 100 and others)
have been proposed for such projects, and the Gavia was trialled in the shallow waters
of the Caspian Sea in 2009 where it conducted inspections from the beach towards the
12m depth contour on multiple adjacent pipes. It should also be noted that small vesselbased
surveys often require a great deal of onshore processing and interpretation of the
data collected during the operations as the size and motion of the vessels preclude all
but basic quality control during data acquisition – just as would be the case if an AUV
were to acquire the data, but if the AUV were able to surface occasionally and relay
some of its data to shore via non-acoustic communications, processing and
interpretation could start much earlier.

It is perhaps in deep-water pipeline inspection tasks that AUVs have major advantages
over work-class ROVs. The primary one is that there are no operational penalties
incurred due to the long and heavy umbilicals required for deep-water ROV operations.
With increasing water depths, the impact of the umbilical weight becomes more
significant. Increasing the number of load bearing elements and buoyancy in the
umbilical can lead to heat dissipation and physical handling issues related to the weight
of the umbilical and the subsequent size and capacities of the topside winch. Other
advantages include a reduction in overall operation time and also in personnel
requirements.

A great deal of research has been undertaken into equipping AUVs (and smart ROVs)
with software that can distinguish and track a linear feature based on input from cameras
and other sensors, and to maintain the vehicle at the optimum offset distance from the
pipeline. In September 2004, a field trial of the AutoTracker system using the Geosub
AUV, designed to track and survey exposed and buried seabed pipelines. It was
developed by a consortium of partners including research laboratories based at Heriot
Watt University (Edinburgh), the National Technical University of Athens, and the
University of the Balearic Islands, together with Innovatum who supplied their magneticbased
pipetracker system and industrial partners BP and Alcatel Submarine Networks.

Under-Ice Research

Manned submersibles and AUVs offer unparalleled access for under-ice research when
compared with surface vessels and ROV deployments from vessels or through holes cut
in the ice. Manned submarine-based research started at the North Pole in 1930 when Sir
Hubert Wilkins acquired the submarine O-12 (subsequently renamed the Nautilus) from
the US Navy. Measurements were to be made by oceanographic pioneer Harald
Sverdrup from a specially rigged diving compartment. Due to mechanical issues the
submarine was limited to short runs at the edge of the ice pack. From 1946, the US
Navy conducted submarine operations under ice, with nuclear submarines crossing the
Arctic in 1958, and surfacing at the North Pole in 1959.

Numerous military submarines crossed the Arctic under the ice during the Cold War
years, and subsequent to the collapse of the former USSR, a co-operative
military/scientific programme was established to allow nuclear-powered submarines to
act as data gathering platforms. Six cruises were conducted during 1992-1999 called
Science Ice Exercises (SCICEXs) and although the Navy provided the submarine and
crew, the science community directed the track of the submarine (within limits in safety).
The torpedo room was adapted as a laboratory. As many as six civilian scientists were
aboard for each cruise. Of critical importance was the fact that at the conclusion of each
cruise, the data collected was declassified and released, often through the National
Science Foundation. During the six dedicated cruises, data was collected over 95,000
km of track during 211 days. Science participants came from several nations including
Canada, the United Kingdom, Russia and the U.S. The data collected ranged from the
physical and biological properties of the ocean to bathymetry and data on the
composition and structure of the ocean subbottom. Much of the bathymetry and seabed
data was destined for use in the US territorial claims under UNCLOS.

A number of AUVs have already been used for under-ice research, either investigating
the underside of the ice itself or the biological communities present. The Scottish
Fisheries Research Service trialled an SBES (Simrad EK-500, 38 and 120kHz) on the
Autosub-1 AUV in 1999 to investigate the distribution, abundance and behaviour of
Antarctic krill in the marginal ice zone, and to assess the potential for the use of AUVs in
the acoustic assessment of fish stock. As transducers were mounted on both the dorsal
(120 kHz) and ventral (38 kHz) surfaces of the AUV, a composite echogram, displaying
the whole water column including the sea surface, was obtained. This was the first time
that such data were collected unhindered by an umbilical or the effect of a towing
support vessel. A similar experiment was conducted in the Southern Ocean on Antarctic
krill using Autosub-2 and the RRS James Clark Ross. The USIPS project undertook
deployments of the Autosub-2 AUV under Antarctic ice, providing the first continuous
line-transect acoustic surveys of krill in the under-ice habitat. Krill density was found to
be elevated under ice and krill per se to be concentrated in a narrow band just inside the
ice-covered zone. There are some vehicles (such as Tuvaaq) that have been specifically
designed to be lowered and retrieved from small diameter holes in the ice – a
conventional AUV torpedo shape requires a much larger opening.

Using an AUV under ice is not without risk and vehicles have been lost (such as the
2005 loss of Autosub in the Antarctic) but the data collected has often been of great
scientific importance. Future AUV missions may well make use of the TILACSys
through-ice communications and location system currently under development by
Wireless Fibre Systems and Kongsberg. The TILACSys will enable a surface vessel, a
helicopter or even an unmanned aerial vehicle to locate and communicate with the AUV
through the ice, thus enabling commands to be sent that may assist in the recovery of
the vehicle.

Acoustic Modems

Modems provide the link between a computer sending or receiving information and the
transmission medium used whether this is copper wire, fibre-optic cable, air or seawater.
The electronics in the modem processes the information to be transmitted into an
optimized form that allows for ease of transmission, and maximizes the chance that it will
be received and understood by the receiving modem. This process includes the
construction of discreet packets of data. The modem’s electronics pass the data packets
to the transmission hardware which will obviously be chosen to suit the transmission
medium.
Acoustic energy travels at around 1,500 m/s in seawater (compared to around 340 m/s
in air), and is generated by the modem passing an electrical signal through a piezoelectric
crystal which then oscillates (vibrates) with a frequency that varies with that of
the electrical signal. The vibrations of the crystal are used to mechanically drive a plate
that is in contact with seawater and the energy from the vibrations are transferred to the
water. This mechanism is known as the transducer. The majority of acoustic modems
operate between 5,000 and 30,000 oscillations per second or Hertz (Hz). This range is
similar to the range of frequencies detectable by the human ear (hence the term
acoustics).

In order to maximize the range of an acoustic modem, it is possible to use a directional
transducer that focuses the energy along a particular axis and if such a system is used,
the receiving transducer must be close to the axis of the transmitting transducer.
(However, a cone is formed, even with directional transducers, which allows for some
offset.) The receiving transducer converts the incoming pressure variations/vibrations
into electrical impulses by a direct reversal of the piezo-electric process, the receiving
modem then converts the electrical signal into data packets and then to useable data.

Disclaimer
All Rights Reserved.

By purchasing this document, your organisation agrees that it will not copy or allow to be
copied in part or whole or otherwise circulated in any form any of the contents without
the written permission of the publishers. Additional copies of this study may be purchased
at a specially discounted rate.

The information contained in this document is believed to be accurate, but no representation
or warranty, express or implied, is made by the publisher as to the completeness, accuracy
or fairness of any information contained in it and we do not accept any responsibility in
relation to such information whether fact, opinion or conclusion that the reader may draw.
The views expressed are those of the individual authors and do not necessarily represent
those of the publishers.

To order this report, please send an email to mail@worldoils.com

----------------------------------------------------------------------------
Search words (for official use only) :
The World AUV Market Report 2012 - 2016
Oil and Gas Forecast - Deepwater Survey
AUV Technology
World AUV Market Report
Oil and Gas Forecast - Deepwater Fields
Oil and Gas Forecast - Pipeline Inspection
AUV Applications
AUV Rationale
Acoustic Modems

---------------------------------------------------------------------------

Available for selling

The World AUV Market Report 2012 - 2016
Contact Us
ID 913
Used 73.15M OSV for Sale
Worldoils Marketplace
Used 73.15M OSV for Sale

Worldrigs ID: WR2893

Offshore Supply Vessel - 1998 Built - For Sale
73.15M Platform Supply Vessel for Sale


Description :

General
Vessel Type : Platform Supply Vessel
Year Built : 1998
Year Converted/Modified : 2012
Classifications : ABS, USCG

Dimensions
Dimensions : 240 ft. X 56 ft. X 21 ft. (73.15 m X 17.07 m X6.40 m)
Draft (Lightship) : 6 ft. 7.25 in. (2.01 m)
Draft (Loadline) : 17 ft. 5.1875 in. (5.31 m)
Clear Deck : 166 ft. 8 in. x 46 ft. (50.8 m x 14.02 m)
Cargo Deck Area : 7,666.67 sq. ft. (712.22 sq. m)
Deck Strength : 540 lb/sq. ft. (2.64 MT/sq. m)
Deadweight Tonnage : 3,293 LT (3,345.27 MT)

Capacities
Fuel Oil : 206,600 gals. (782.1 cu. m)
Ballast : 416,300 gals. (1,575.9cu. m)
Potable Water : 24,031 gals. (90.97 cu. m)
Dry Bulk : 8,000 cu. ft. @ 80 psi (226.5 cu. m @ 5.5bars)
Liquid Mud : 6,060 barrels (963.5 cu. m)
Service Tanks : Seven (7) tanks, 11,900 gals. total (45 cu. mtotal)

Machinery
Main Engines : Two (2) 3516 CAT Diesels, 3,200 BHP
Thrusters : One (1) 1,100 HP CP Tunnel
Thrusters : One (1) 1,200 HP Dropdown Ulstein 900 HRV
Speed : 10.5 knots
Generators : Two (2) x 500 kW
Generators : One (1) x 170 kW emergency

Special Features
Ship Motion : Two (2) Passive Type Anti-Roll Tanks
Ship Motion : Bilge Keels
Positioning : DP 2

Life Saving Equipment
Life Rafts : Four (4) x 25-Man Life Rafts
Life Rafts : Two (2) x 10-Man Inflatable Life Rafts
Rescue Boat/Craft : One (1) x 5.8 m Rescue Boat
Rescue Boat/Craft : One (1) x 5.8 m
Other gear as required by authorities

Accommodations : 29

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


------------------------------------------------------------------------
Search words (for official use only)  :
Used 73.15M OSV for Sale
29 Accommodations Offshore Supply Vessel for sale
240FT Offshore Supply Vessel for sale
2012 Converted Offshore Supply Vessel for Sale
OSV - 10.5 Knots Speed - For Sale
1998 Built OSV for Sale
240FT ABS Class Offshore Supply Vessel for Sale
Used OSV - 240ft - for Sale
10.5 Knots Offshore Supply Vessel for Sale
2012 Modified OSV for Sale

------------------------------------------------------------------------
Available for selling

Offshore Supply Vessel - 1998 Built - For Sale
Contact Us
ID 2893
2017 Built Bullet Tanks for Sale
Worldoils Marketplace
2017 Built Bullet Tanks for Sale

Worldrigs ID: WR2950

LPG Bullet Tanks for Sale
2017 Built Bullet Tanks for Sale

 
Description :

Bullets Technical Data
1) Design Code : ASME SECTION VIII DIV 2, CLASS 2 2017 EDITION & EEMUA 190 :
EDITION 1 (2017)
2) Bullet Size : ID 8m x 61m TL/TL ; Quantity : 4 bullets
3) Shell / Hemi head thickness & material = 38mm (Shell) & 25mm (Head) SA 537 cl 2
4) Design Pressure (Internal / External) = 19 / FV barg
5) Design Temperature (Max / Min) = 50 / -40 deg C
6) PWHT : Yes
7) Capacity = 3,300 m3 per bullet
8) Weight
Empty Weight = 612 MT
Operating Weight = 2,308 MT
Full of Water Weight = 3,950 MT

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Used LPG Bullet Tanks for Sale
LPG Storage Tanks for Sale
Liquefied Petroleum Gas Storage Tanks for Sale
LPG Bullet Tanks - 2017 Built for Sale
3,300 m3 Bullet Tanks for Sale

-------------------------------------------------------------------------------------------------------
Available for selling

LPG Bullet Tanks - For Sale
Contact Us
ID 2950
HiPer Submarine for sale
Worldoils Marketplace
HiPer Submarine for sale

Worldrigs ID: WR2135

New HiPer Submarine for Sale
2 persons HiPer Submarine for Sale


General Characteristics
Occupants : 1 pilot and 1 passenger
Maximum Operating Depth : 100 meters / 330 feet
Operational Autonomy : Up to 6 hours
Type : Dry, 1 atmosphere

Classification : DNV-GL

Dimensions and Weight

Dimensions :
LxWxH 285 cm x 235 cm x 136 cm
Fits in standard shipping container

Weight (ex. passengers) : 2,200 kg (Salt water)
Maximum Allowable Payload : 200 kg (Salt water)

Pressure Hull
Pressure Hull Material : Acrylic + Steel
Hatch Type : Top-Hatch

Propulsion
Propulsion Type : Electrical, Brushless DC
Propulsion Horizontal : 2 x 5.5 kW Thrusters
Propulsion Vectored Vertical : 4 x 6.4 kW Thrusters
Surface Speed : 3.5 knots
Underwater Speed : 6 knots

Life Support Systems

Oxygen System : Continuous Flow
Mission Oxygen Capacity : 2 Liter (Quick Exchange)
Emergency Oxygen Capacity : 2 x 13.4 Liter @ 200 bar
Carbon Dioxide Removal : 6 hours with Calcium Hydroxide
Survival Period : 96 hours
Emergency CO2 Removal : Lithium Hydroxide Blankets
Autonomous Breathing Devices : 2
Life Support Monitoring : 2 independent life support monitors (O2 - CO2)

Ballast and Buoyancy Systems

Number of Ballast Tanks : 4
Main Ballast Tank Capacity : 950 Liter
Compressed Air Capacity : 2 x 20 Liter @ 200 bar
Hydraulically Releasable Weight : 100 kg
Buoyancy Tank : 50 Liter

Power Capacity

Total Power Capacity : 21.6 kWh
Battery Type : High Capacity Lithium-ion
Propulsion System Capacity : 2 x 130 VDC Battery Packs - 15.6 kWh
House System Capacity : 2 x 24 VDC Battery Packs - 6 kWh
Charging (Optimal Cycle) : 4 hours
Emergency Battery : 96 hours for Critical Systems

Navigation, Communication, Auxiliary

Air Conditioner System : 7,000 BTU
Underwater Communication : Single sideband acoustic telephone, 25 kHz
Surface Communication : VHF Handheld Unit
Navigation : Echosounder, Magnetic Compass, Electronic Compass
Control System : “MANTA“ controller, “MARLIN“ Controller
Information System :
Alarm System, Battery Status, Thruster Status, Sensor Status,
Internal Pressure, Depth, Electrical Insulation Monitoring,
Water Ingress Sensors, Freon Sensor, Buoyancy Tank
Level Indicator, Internal and External Temperature

Safety Equipment

Pinger Locator Beacon System, Emergency Releasable Buoy,
Maximum Depth Protection, Deadman Switch, Fire Extinguisher,
External Air Connection for diverassisted ascent, Xenon Flasher

Other
Protective Cover for Acrylic Viewport, Checklists and Manuals,
Topside Communication Unit

Price & terms : Please enquire using the email form below

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------
Search words (for official use only) :
New HiPer Submarine for Sale
HiPer Submarine with 100 meter diving depth for Sale
2 persons New HiPer Submarine for Sale
100 meter diving depth - New HiPer Submarine

-------------------------------------------------------------------------------
Available for selling

New HiPer Submarine for Sale
Contact Us
ID 2135
A-frames for sale
Worldoils Marketplace
A-frames for sale

Worldrigs ID: WR1478

A-frames for Sale
250 ton capacity A-frames for Sale
Two A-frames for Sale

Description 

Two identical 250T A-Frames earlier installed on two AHTS vessels. 
Never in commercial use, only tested and since then stored onshore
with regular maintenance.


Each A-frame can be delivered with 150 MT AHC systems. The In-Line 
Active Heave Compensation system is a linear, cylinder based design, 
utilizing cylinders to compensate for vertical vessel movements within 
specifications.

Capacity : 250 mT
Year of manufacture : 2010
Manufacturer : AxTech, Norway
Overall width : 18 meter
Total height : 22 meter
Free height (light opening) : 19.2 meter
A-frame lifting height : 16.6 meter

Approx total weight : 180 ton
Hydraulic pressure : 280 bar
Hydraulic supply : Max. 1000 l/min
Speed full stroke : Approx. 300 seconds
Location : Western Norway
Condition : Very good
Sales terms : “As is, where is”
 

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------------------------------------------
Search words (for official use only) :
2010 Built A-frames for Sale
A-frames for Sale - 250 Ton capacity
A-Frames - 2010 Built - For Sale
A-frames with 150T AHC systems for Sale
250 Ton capacity A-frames for Sale

-----------------------------------------------------------------------------------------------------------------------

Available for selling

A-frames - 250 Ton - for sale
Contact Us
ID 1478
2006 built Separate HPU with Thruster Mounted on Deck for sale
Worldoils Marketplace
2006 built Separate HPU with Thruster Mounted on Deck for sale

Worldrigs ID: WR2086

Unused Separate HPU with Thruster Mounted on Deck or Platform
Konsberg Dynamic Positioning System with Thrusters for Sale
2006 built Thruster Mounted on Platform or Deck for sale


Specifications
Equipment type : Separate HPU with Thruster Mounted on Deck or Platform
Thruster material of construction : ASTM A36, Grade B carbon steel
Prime mover : Caterpillar 3516B marine diesel propulsion engine
Prime mover mounting : Containerized Power Unit (HPU)

Rated Output Power : 2,028 bhp
Rated Input Speed : 1,600 rpm
Thruster Continuous Rating : 2,000 SHP

Nominal static bollard thrust : 39,600 LBF
Propeller and nozzle type :
81-inch Kaplan accelerator series in Kort type 19A nozzle

Propeller material of construction : Nickle-Aluminum-Bronze
Propeller direction of rotation : Bi-directional
Propeller speed of rotation : 305 rpm
Hydraulic flow at rated speed : 1,122 gpm
Hydraulic pressure at rated speed : 2,635 psid
Hydraulic reservoir capacity : 400usg

Diesel fuel day tank capacity : 1,060 usg (4012 L)
Steering speed of thruster : 3 rpm
Nominal weight of thruster : 160,000 lbm
Nominal weight of power unit : 95,000 lbm

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


-----------------------------------------------------------------------------------------------------------------------------
Search words (for official use only) :
2006 built Separate HPU with Thruster Mounted on Deck for sale
Unused Separate HPU with Thruster Mounted on Deck or Platform
2006 built Separate HPU with Thruster Mounted on Platform for sale
Konsberg Dynamic Positioning System with Thrusters for Sale
Unused Thruster Mounted on Deck for Sale
2006 built Thruster Mounted on Platform for sale

-----------------------------------------------------------------------------------------------------------------------------
Available for selling

Konsberg Dynamic Positioning System with Thrusters for Sale
Contact Us
ID 2086
Trailer Suction Hopper Dredger - 5000cbm - for Sale
Worldoils Marketplace
Trailer Suction Hopper Dredger - 5000cbm - for Sale

Worldrigs ID: WR2026

Trailer Suction Hopper Dredger for Sale
5000cbm Trailer Suction Hopper Dredger

Build time : July.2009
Length overall : 105.75m
Breadth mld : 18.8m
Depth mld : 8.6m

GT : 5132
NT : 1539
Unloading draft : 4.188m
Full loading draft : 6.75m
Full loading displacement : 11112.1T
No loading displacements : 3510t

Dredging depth : 28m
DWT : 7019T
Area coastal
Working area : A1+A2

Generator type :
TFXW-355L6-H, Rated power: 300, speed: 1000rpm Quantity: 3set
TFXW-250M4-H Rated power: 90 speed: 1500rpm Quantity: 1set
Main engine :
G8300ZC20B-1, rated power: 2206kw, Ningbo zhongce, quantity: 2set

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------
Search words (for official use only) :
Trailer Suction Hopper Dredger - 2009 Built - for Sale
5000cbm
Trailer Suction Hopper Dredger
Trailer Suction Hopper Dredger for Sale in China
2009 Built
Trailer Suction Hopper Dredger
28m Dredging Depth 
Trailer Suction Hopper Dredger
-------------------------------------------------------------------------------------------

Available for selling

Trailer Suction Hopper Dredger - 5000cbm - for Sale
Contact Us
ID 2026
Ingersoll-Rand 1170 cfm / 350 psi Air Compressor for Sale
Worldoils Marketplace
Ingersoll-Rand 1170 cfm / 350 psi Air Compressor for Sale

Worldrigs ID: WR1673

Ingersoll-Rand 1170 cfm - 350 psi Air Compressor For Sale
350 psi Air Compressor For Sale in USA

Model : 1170 cfm / 350 psi Air Compressor
Manufacturer : Ingersoll-Rand
Condition : Used

Description :

Ingersoll-Rand 1170 cfm / 350 psi Air Compressor
9338 Hours
CAT C15 Diesel Engine - S/N: BEM04033
Electric Starter
Radiator
Control Panel
Heat Exchangers
Skid Mounted


Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------------------------------------
Search words -
Ingersoll-Rand 1170 cfm / 350 Air Compressor for Sale
Ingersoll-Rand 1170 cfm Air Compressor
Ingersoll-Rand Air Compressor for Oilfield Drilling
Used Air Compressor for Sale in USA
350 psi Air Compressor for Sale
Ingersoll-Rand Air Compressor for Sale
----------------------------------------------------------------------------------------------------

Available for selling

Ingersoll-Rand 1170 cfm / 350 psi Air Compressor for Sale
Contact Us
ID 1673
Halliburton HT400 Pump Allison Transmission
Worldoils Marketplace
Halliburton HT400 Pump Allison Transmission

Worldrigs ID: WR586

Halliburton HT400 Pump Allison Transmission - For Sale
Used Single Pumping Unit for Drilling


Description
Halliburton HT-400 single pumping unit with
GM 8V71 engine and
Allison 750 transmission
All on a compact skid

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

--------------------------------------------------------------------------------------------------
Search words(for official use only) -
Halliburton HT400 Pump Allison Transmission for Drilling in Singapore
Pump Allison Transmission for Drilling
Drilling Equipment - Halliburton HT400 Pump Allison Transmission
Halliburton HT400 Pump Allison Transmission For Sale
Used Halliburton HT400 Pump Allison Transmission in Singapore
Used Single Pumping Unit for Drilling

-------------------------------------------------------------------------------------------------
Available for selling

Halliburton HT-400 Pump Allison Transmission - For Sale
Contact Us
ID 586
Drilling Rig - 1500hp - For Sale
Worldoils Marketplace
Drilling Rig - 1500hp - For Sale

Worldrigs ID: WR2515

Drilling Rig - 1500hp - For Sale
2009 Built Drilling Rig for Sale


Description :

General Description :
Make : Nov               
Year Built/Rebuilt : 2009               
Estimated Drilling Depth : 18,000 ft               
Estimated Rig Move Loads : 60               
Estimated Camp Move Loads : 23               
Rated HP : 1500               

Mast :

Height : 142.00 ft               
Static Hook Load Capacity : 750,000 lbs               
Mast Racking Capacity : 19,300 ft               
                                           
Substructure :                                            
Style : Parallelogram               
Height : 25.00 ft               
Clear Height : 21.30 ft               
Casing Capacity : 750,000 lbs               
Maximum Setback Load (lbs) : 500,000               
                                           
Drawworks :
Make : Nov                                           
Model : JC-50D
Power Rating : 1,500 hp                                           
Input Power : 2 ea Yongji
                       YZ08X3   
Brake Type - Band or Disc : Disc                                           
Drilling Line Size : 1 3/8"                                           
Auxillary Brake : Wichita WC66                                           
                                           
Top Drive / Power Swivel :
Make : Nov
Model : TDS 11-SA                                           
Capacity : 500 Ton                                           
Torque - Continuous : 37,500 ft-lb @ 125 RPM                                           
                                           
Swivel :
No Swivel

Rotary Table :
Make : NOV ZP-375                                           
Table Opening : 37 ½"                                           
Maximum Load Rating : 650 Ton                                           

Power Generation :                                           
Engines : 4 ea Detroit Diesel R1638A36                   
Generators : 4 ea Baylor Generation Group S437RUJ-597A                   
SCR / VFD / DC/DC : SCR Rig

Enhancements :
Crane :Terex RT555-1                                                               
Forklift : Caterpillar IT 62 H                                                               
Iron Roughneck : NOV IR-3080

Mud System :                                               
Mud Pumps : 3 ea NOV 12-P-160
                      1,600 hp @ 120 spm
Reserve Mud Volume : 285 bbls   
Pressure Rating : 5,000 psi                                   
Active Mud Volume : 1100 bbls                                   
Power Rating :                                                
Shale Shakers : 3 ea MI Swaco Mongoose                                   
Mud Cleaner : N/A 1 ea MI Swaco Mongoose                               
Desander : MI Swaco                                
Desilter : MI Swaco                                
Centrifuge : N/A                                   
                                               
Well Control :
Annular                   
13 5/8" 5,000 psi, Shaffer,                    
Double Ram Preventer                   
13 5/8" 5,000 psi, Shaffer,                    
Choke Manifold                   
4 1/16"" 5,000 psi                   
BOP Closing Unit                   
Sara Services
MC220-11BT3                   
T3 Energy Services B30240615T3P                   
                   
Price & terms : Please enquire using the email form below

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------
Search words (for official use only) :    
Drilling Rig - 2009 Built for Sale
1500hp Drilling Rig for Sale
2009 Built - JC-50D - Drilling Rig for Sale
Used Drilling Rig for Sale
Land Drilling Rig for Sale
-------------------------------------------------------------------------- 
               
Available for selling

Drilling Rig - 1500hp - For Sale
Contact Us
ID 2515
Used Jack-up Rig for sale
Worldoils Marketplace
Used Jack-up Rig for sale

Worldrigs ID: WR2669

300ft Jack-up Rig for Sale
Mobile Offshore Drilling Unit for Sale
2018 built Offshore Rig for Sale

General
Year Re-Built : 2018
Upgrade : 2018 (Overhaul)
ABS Class Notations : A1, Mobile Offshore Drilling Unit (MODU)
Last Inspection (ABS) : January 2019

Main Dimensions
Length : 247 ft -7 in; Breadth : 227 ft -5 in; Depth : 26 ft
Legs : 3 x 410 ft Square Truss
Leg Spacing : Longitudinal leg centers 129 ft; transverse leg centers 142 ft
Spud cans : 46 ft diameter x 24 ft high
Cantilever : Slot dimensions 41 ft x 50 ft
Helideck : S-61; diameter 70 ft

Operational Parameters

Water Depth : 300 ft (17 ft - 300 ft)
Maximum Drilling Depth : 20.000 ft with 5 in DP
Available length below hull including 5 ft margin Air Gap : 80 ft
Transit Speed : 5 knots
Survival Conditions –
Criteria Design; wind : 100 Knots; waves period: 13 sec; wave height: 44 ft
Jacking and skidding system : Marathon LeTourneau AC electric rack and pinion, 90 ft/HR

Drilling Equipment

Derrick : Dreco 170 ft x 30 ft x 30 ft x 1.500.000 lbs.
Cantilever Load : 1.310.000 lbs.
Drawworks : 1320 x UE 2000HP National Oilwell; wire 1 ½”. Electric brake: model 7838 Baylor
Rotary Table : model C-375 National Oilwell 37 ½", driven by 1 D79 EMD motor
Top Drive : model TDS-4H Varco BJ 650 TON, with Pipe Handler model PH-85
Travelling : Continental Emsco 760H 650 TON
Crown Block : National OilWell 760FA
Mud Pumps : 2 National Oilwell modelo 12-P-160 Triplex - 5000 psi. Stand pipe 5 in x 5000 psi
Main Power : 3 EMD 16-645-E8 Engines 6600 HP, generators AB20-N6 x 1,575 kW 600 V
Emergency Power : 1 Cat 3412-TA 719 HP Diesel engine
Cementing Unit : 2 electric triplex pumps. 15000 PSI, 14 BPM
Control System : air/electric powered
Choke and Kill Manifold : 3-1/16" x 10000 psi x 2 HCR & 2 manual

Capacities

Liquid Mud : 1605 bbls
Bulk Mud / Cement : 6240 cu.ft
Sacks : 2500 sacks
Drill Water : 10540 bbls
Potable Water : 1294 bbls
Fuel Oil : 4727 bbls
Base Oil : 563 bbls
Preload Tanks (include combination tanks) : 15542 kips

Mud Equipment
Mud cleaner (4) MI Swaco; Desilter (1) Mi Swaco; Degaser, Rig Vaccum MI Swaco..

Accommodations
88 berths;
Main offices, auxiliary offices;
Mess and galley, meeting room;
Recreation room and gym,
Medical office with observation room and bedroom with eight beds for quarantine cases
Watermaker : model NH75463+APC, FCI
Sewage Treatment : model RF 4000-M; Red Fox

Security Systems
Communication and Navigation System GMDSS
Smoke and Heat detection System
CO2 Extinguishing System;
Water Extinguishing System with Raw Water System.; Portable extinguishing equipment
Toxic Gas (H2S) and Combustible Gas (CH4) Detection System
General Alarm System
Emergency Shutdown System
CCTV System
One Lifeboat (63 Man Cap.),
Two survival capsules (28 Man Cap. each),
Four Liferafts (25 Man Cap. each)

Price & terms  :  Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

------------------------------------------------------------------------------------
Search words (for official use only)  :
300ft Jack-up Rig for Sale
Used Offshore Rig for Sale
2018 built Offshore Rig for Sale
Jack-up Rig - Overhauled in 2018 - For Sale
Mobile Offshore Drilling Unit for Sale
2018 Built MODU - 300 FT - For Sale
ABS Class Jack-up Rig for Sale
Used 2018 Built Jack-up Rig - For Sale

----------------------------------------------------------------------------------
Available for selling

300 FT Jack-up Rig for Sale
Contact Us
ID 2669
McNamara Propane Tank for Sale - 1948 Built
Worldoils Marketplace
McNamara Propane Tank for Sale - 1948 Built

Worldrigs ID: WR1362

Propane Storage Tanks for Sale
Used McNamara LPG Storage Tanks for Sale
1948 Built - 18,000 Gallon Propane Tank for Sale

Description
Quantity : 2
Manufacturer : McNamara
Year : 1948
Pressure : U69-200psi
Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

Propane Tanks          Liquefied Petroleum Gas Storage Tank

--------------------------------------------------------------------------------------------------------------------------
Search words(for official use only) :
Propane Storage Tanks for Sale
1948 Built LPG Tanks for Sale
Liquefied Petroleum Gas Storage Tank for Sale
Used McNamara Propane Tank for Sale
18,000 Gallon Capacity Propane Storage Tank for Sale
McNamara Propane Tank for Sale - 1948 Built
Used 18,000 Gallon LPG Storage Tank for Sale

---------------------------------------------------------------------------------------------------------------------------

Available for selling

Used Propane Storage Tanks - 18,000 Gallon 1948 Built - for sale
Contact Us
ID 1362
National OS-435 H.D model Pedestal Offshore Crane
Worldoils Marketplace
National OS-435 H.D model Pedestal Offshore Crane

Worldrigs ID: WR1485

Offshore Pedestal Crane for Sale
OS-435 Refurbished Offshore Pedestal Crane for sale


The crane is completely refurbished and complies with API-2C

Specifications


• Hydraulic pedestal crane model : National OS-435 H.D
• Original year of manufacture : 1981
• Boom length : 42.675m (140ft)
• Weight : 105,400 Lbs / 47, 810Kg (incl. Boom)
• Main hoist capacity : 28,875Kg @ 19.5m (platform duty)
• Whip hoist capacity : 7,275Kg @ 46.5m (platform duty)

Overhaul included :
- Full engine overhaul including Dyno Test
- Triple Gearbox refurbished
- Booms & A-frame blasted, painted & NDT inspection completed
- Bridle Assembly inspected and NDT
- All sheaves & shafts inspected and NDT
- Slew bearing refurbished and NDT
- Boom, Main and Whip rope winches inspected
- Brake band linings renewed
- All brake cylinders refurbished and pressure tested including Pawl cylinder
- Installation of slewing limit swit ches (change to original (OEM) spec)
- New hydraulic hoses installed and pressure tested
- Hydraulic pumps and motors refurbished and performance tested
- New wire ropes (Main & Whip hoist) and Pendant lines installed
- Refurbished operators cabins with new gauges , and air conditioning unit
- New Mipeg Rated Capacity Indicator (RCI) System
- Painted to marine specification

• Rated for Zone 2 safe operations
• MOM certified (Singapore Ministry of Manpower)
• All structural inspection reports available
• Installation / change out services available

Available Immediately

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------------
Search words (for official use only)
Offshore Pedestal Crane for Sale
National OS-435 H.D model Pedestal Offshore Crane - For Sale
140ft Offshore Pedestal Crane for Sale
Refurbished Offshore Pedestal Crane for Sale
1981 built Offshore Pedestal Crane
National OS-435 Refurbished Offshore Pedestal Crane for sale

---------------------------------------------------------------------------------------------------------------

Available for selling

Refurbished Offshore Pedestal Crane for Sale
Contact Us
ID 1485
51 Ton Aanchor for Rent
Worldoils Marketplace
51 Ton Aanchor for Rent

Worldrigs ID: WR2952

Aanchor for Rent
51 Ton Aanchor for Rent


Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Union stockless 5 ton Aanchor for Rent
Baldt anchor 13.6 ton for Rent
23 ton Union stockless anchors for Rent
Vryhof Stevpris 51 ton anchors for Rent
Used Aanchor for Rent

-------------------------------------------------------------------------------------------------------
Available for selling

Aanchors for Rent
Contact Us
ID 2952
Nitrogen Pumping Unit for sale
Worldoils Marketplace
Nitrogen Pumping Unit for sale

Worldrigs ID: WR1453

Nitrogen Pump Unit for sale
LN2 Nitrogen Pumping Unit

Description :

Model : 180khr

Key Components
Trailer :
Tridem  axles, 2” King pin, 54.7in ground clearance unloaded,
11.00/R22.5 tire, air suspension system, ABS, 12V, DOT
Nitrogen System
Engine :
1set ,Model : DDC S60 , 600hp@2100rpm,DDEC IV, electrical start, electric emergency
kill, 24V generator, heavy duty air filter, air compressor, 600L fuel tank

Plunger Pump
 ACD 3-GUPD, 205bhp, 32gpm LN2 displacement, 10000psi working pressure,
1.625” plunger, 1.5” stroke

Vaporizer
VWP-145-10, 180000SCFH rated evaporative power , 10000psi rated working pressure,

60o F -140o F discharge nitrogen temperature
Supercharging pump : AC-18
Liquid nitrogen tank : New tank

Performance
Nitrogen System :
Max. nitrogen displacement 180,000 SCFH
Max. working pressure 10000 psi
Max. fluid theoretical discharge flow 343GPM
Discharge nitrogen
Temperature 60o F -140o

Warranty 12 months manufacturer warranty

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


--------------------------------------------------------------------------------
Search words (for official use only) -
Trailer Mounted LN2 Pumper Unit
Nitrogen Pump Unit for Drilling
Nitrogen Pumper for Sale
LN2 Nitrogen Pumper Unit for Sale
Nitrogen Pumping Unit

--------------------------------------------------------------------------------


Available for selling

Nitrogen Pumping Unit for sale
Contact Us
ID 1453
Permian Basin in the US
Worldoils Marketplace
Permian Basin in the US

Worldrigs ID: WR1750

Name of the Report :
Permian Basin in the US, 2013 - Oil and Gas Basin Analysis
and Forecasts to 2020


Published Date :27-Jun-2013
No. of pages : 79

Table of Contents

1 Table of Contents
1 Table of Contents… 4
1.1 List of Tables… 6
1.2 List of Figures… 8
2 Introduction… 9
2.1 Overview… 9
2.2 Report Guidance… 9
3 Permian Basin Overview… 10
4 Permian Basin, Operational Overview… 13
4.1 Permian Basin, Well Profile… 13
4.2 Permian Basin, Initial Production Rates… 13
4.3 Permian Basin, Production Trends, 2008–2012… 15
4.3.1 Permian Basin, Historical Gross Oil and Gas Production… 15
4.3.2 Permian Basin, Historic and Forecast Gross Production,
2008–2020… 19
4.4 Permian Basin, Production Analysis by County, 2008–2012… 21
4.4.1 Permian Basin, Production Analysis by County, Texas… 21
4.4.2 Permian Basin, Production Analysis by County, New Mexico… 28
4.5 Permian Basin, Cost Trends… 32
4.5.1 Well Costs… 32
4.5.2 Finding and Development Costs… 33
4.6 Permian Basin, Drilling Activity, 2012… 34
4.6.1 Permian Basin, Drilling Activity by County, Texas, 2012… 34
4.6.2 Permian Basin, Rig Count, 2005–2012… 36
5 Permian Basin, Competitive Landscape… 40
5.1 Permian Basin, Major Companies by Acreage… 40
5.2 Permian Basin, Major Companies by Production… 42
5.2.1 Permian Basin, the US, 2012… 42
5.2.2 Permian Basin, Texas, 2012… 44
5.2.3 Permian Basin, New Mexico, 2012…46
5.3 Permian Basin, Future Plans by Major Companies… 48
5.3.1 Permian Basin, Planned Investments, 2012 and 2013… 48
5.3.2 Permian Basin, Planned Wells, 2013… 49
5.3.3 Permian Basin, Planned Rigs, 2012 and 2013… 50
6 Permian Basin, Analysis of Top Five Companies… 51
6.1 Occidental Petroleum Corporation… 51
6.2 Apache Corporation… 54
6.3 ExxonMobil Corporation… 58
6.4 Chevron Corporation… 59
6.5 Devon Energy Company… 60
7 Permian Basin, Mergers and Acquisitions Activity, 2007–May 2013… 64

List of Tables

1.1 List of Tables
Table 1: Permian Basin, Key Characteristics, 2013… 12
Table 2: Permian Basin, Average Decline Rates Per Well, 2013… 13
Table 3: Permian Basin, Average Initial Production Rates by
Companies (boed), 2012*… 14
Table 4: Permian Basin, the US, Gross Oil and Gas Production
(mmboe), 2008–2012… 16
Table 5: Permian Basin, Texas, Gross Oil and Gas Production
(mmboe), 2008–2012… 17
Table 6: Permian Basin, New Mexico, Gross Oil and Gas Production
(mmboe), 2008–2012… 18
Table 7: Permian Basin, Historic and Forecast Gross Production
(mmboe), 2008–2020… 20
Table 8: Permian Basin, Texas, Total Gross Production by County
(mmboe), 2008–2012… 22
Table 9: Permian Basin, Texas, Gross Oil Production by County
(mmbbl), 2008–2012… 24
Table 10: Permian Basin, Texas, Gross Gas Production by County (bcf),
2008–2012… 26
Table 11: Permian Basin, New Mexico, Gross Production by County
(mmboe), 2008–2012… 29
Table 12: Permian Basin, New Mexico, Gross Oil Production by County
(mmbbl), 2008–2012… 30
Table 13: Permian Basin, New Mexico, Gross Gas Production by County
(bcf), 2008–2012… 31
Table 14: Permian Basin, Cost Per Well for Major Companies (US$ million
Per Well), Latest Reported… 32
Table 15: Permian Basin, Finding and Development Cost (US$ per boe),
Latest Reported… 33
Table 16: Permian Basin, Texas, New Drilling Permits Issued,
2005–2012… 35
Table 17: Permian Basin, the US, Rig Count, 2005–2012… 37
Table 18: Permian Basin, Texas, Rig Count, 2005–2012… 38
Table 19: Permian Basin, New Mexico, Rig Count, 2005–2012… 39
Table 20: Permian Basin, Major Companies by Acreage, Net Acres,
Latest Reported… 41
Table 21: Permian Basin, the US, Top Ten Companies by Total Gross
Production (mmboe), 2012… 43
Table 22: Permian Basin, Texas, Top Ten Companies by Total Gross
Production (mmboe), 2012… 45
Table 23: Permian Basin, New Mexico, Top Ten Companies by Total
Gross Production (mmboe), 2012… 47
Table 24: Permian Basin, Planned Capital Expenditure by Major Companies
(US$ million), 2012 and 2013… 48
Table 25: Permian Basin, Number of Planned Wells by Major Companies,
2013… 49
Table 26: Permian Basin, Number of Planned Rigs by Major Companies,
2012 and 2013… 50
Table 27: Occidental Petroleum Corporation, Permian Basin, Key
Operational Parameters, Latest Reported… 52
Table 28: Occidental Petroleum Corporation, Non-CO2 Business, Key
Operational Parameters, Latest Reported… 54
Table 29: Apache Corporation, Permian Basin, Key Operational Parameters,
Latest Reported… 56
Table 30: Apache Corporation, Key Operational Parameters, Latest
Reported… 57
Table 31: ExxonMobil Corporation, Permian Basin, Key Operational
Parameters, Latest Reported… 58
Table 32: Chevron Corporation, Permian Basin, Key Operational
Parameters, Latest Reported… 60
Table 33: Devon Energy Corporation, Permian Basin, Key Operational
Parameters, Latest Reported… 62
Table 34: Devon Energy Company, Key Operational Parameters,
Latest Reported… 63
Table 35: Permian Basin, Merger and Acquisition Activities,
2007–May 2013… 65
Table 36: Permian Basin, Recent Deals, 2010–May 2013* …65


List of Figures


1.2 List of Figures
Figure 1: Permian Basin, Texas and New Mexico, Operational
Map, 2013… 10
Figure 2: Permian Basin, the US, Top Oil and Gas Fields, 2013… 11
Figure 3: Permian Basin, Stratigraphy, 2013… 12
Figure 4: Permian Basin, the US, Gross Oil and Gas Production,
2008–2012… 16
Figure 5: Permian Basin, Texas, Gross Oil and Gas Production,
2008–2012… 17
Figure 6: Permian Basin, New Mexico, Gross Oil and Gas Production,
2008–2012… 18
Figure 7: Permian Basin, Historic and Forecast Gross Production (mmboe),
2008–2020… 19
Figure 8: Permian Basin, Texas, Gross Production by County (mmboe),
2008–2012… 21
Figure 9: Permian Basin, Texas, Gross Oil Production by County (mmbbl),
2008–2012… 23
Figure 10: Permian Basin, Texas, Gross Gas Production by County (bcf),
2008–2012… 25
Figure 11: Permian Basin, New Mexico, Gross Production by County (mmboe),
2008–2012… 28
Figure 12: Permian Basin, New Mexico, Gross Oil Production by County
(mmbbl), 2008–2012… 29
Figure 13: Permian Basin, New Mexico, Gross Gas Production by County
(bcf), 2008–2012… 31
Figure 14: Permian Basin, Texas, New Drilling Permits Issued,
2005–2012… 34
Figure 15: Permian Basin, the US, Rig Count, 2005–2012…36
Figure 16: Permian Basin, Texas, Rig Count, 2005–2012… 37
Figure 17: Permian Basin, New Mexico, Rig Count, 2005–2012… 39
Figure 18: Permian Basin, Top 20 Companies by Acreage (Net Acres),
Latest Reported… 40
Figure 19: Permian Basin, the US, Top Ten Companies by Total Gross
Production (mmboe), 2012… 42
Figure 20: Permian Basin, Texas, Top Ten Companies by Total Gross
Production (mmboe), 2012… 44
Figure 21: Permian Basin, New Mexico, Top Ten Companies by Total
Gross Production (mmboe), 2012… 46
Figure 22: Occidental Petroleum Corporation, Permian Basin Plays,
Operational Map, 2013… 51
Figure 23: Apache Corporation, Permian Basin Plays, Operational
Map, 2013… 55
Figure 24: Chevron Corporation, Permian Basin Plays, Operational
Map, 2013… 59
Figure 25: Devon Energy Corporation, Permian Basin Plays, Operational
Map, 2013… 61
Figure 26: Permian Basin, Merger and Acquisition Activity, 2007–May
2013… 64

Summary


This new report "Permian Basin in the US, 2013 - Oil and Gas Basin Analysis
and Forecasts to 2020" provides insight into the shale gas exploration and
development potential of the Permian basin. The report also provides details
of the key exploration areas and major companies exploring various shales
and plays in the Permian Basin.

Scope

The report analyzes oil and gas exploration and production activities in the
Permian Basin. The scope of the report includes -
- An overview of oil and gas exploration in the Permian Basin.
- Information on drilling and exploration activities in the different counties of Texas,
including Andrews, Nolan, and Pecos.
- An overview of the competitive landscape of the company in the Permian Basin,
and discussion of the cost per well as well as finding and development costs.
- Current exploration and production statistics for the Texas region of Permian
Basin. The report also provides forecasts for production from 2013–2020.
- Coverage and an overview of operations in the Permian Basin.
- Information on the major mergers and acquisitions in the Permian Basin
from 2007–May 2013.


Reasons to buy


The report will enhance your decision making capability. It will allow you to -
- Develop business strategies with the help of specific insights into the Permian
Basin oil and gas market, primarily in the Texas and New Mexico regions
of the US.
- Plan your strategies based on expected developments of the Permian Basin,
primarily in the Texas and New Mexico regions of the US.
- Understand the competitive landscape of companies in the Permian Basin

Price


Single User Price : $1,500
Site License Price : $3,000
Enterprisewide Price (Global Site License) : $4,500


Disclaimer
All Rights Reserved.

No part of this publication may be reproduced, stored in a retrieval system or transmitted
in any form by any means, electronic, mechanical, photocopying, recording or otherwise,
without the prior permission of the publisher.

The facts of this report are believed to be correct at the time of publication but cannot be
guaranteed. Please note that the findings, conclusions and recommendations that the
publisher delivers will be based on information gathered in good faith from both primary
and secondary sources, whose accuracy we are not always in a position to guarantee.
As such the publisher accept no liability whatever for actions taken based on any
information that may subsequently prove to be incorrect.

To order this report, please send an email to mail@worldoils.com
------------------------------------------------------------------------------------------------
Search words (for official use only) :

Permian Basin, Operational Overview
Permian Basin, Drilling Activity, 2012
Permian Basin, Historical Gross Oil and Gas Production
Permian Basin, Future Plans by Major Companies
Permian Basin, Competitive Landscape
Occidental Petroleum Corporation

------------------------------------------------------------------------------------------------

Available for selling

Permian Basin in the US, 2013 - Oil and Gas Basin Analysis and Forecasts to 2020
Contact Us
ID 1750
   
1 2 3 4 5 6 7 8 9 10
  


Untitled Document
Featured equipments for sale
 
Tugboat For sale
Worldoils Marketplace
Tugboat For sale

Worldrigs ID: WR132

2006 Built Tug for sale
Tugboat for sale


Description


Type of Ship : Tug Boat,coastal and harbour
Built Year : May 8,2006
Class : ZC
GRT/NRT : 487tons/146tons

Dimensions
Loa : 42.60m
Lpp : 38.70m
Breadth (M) : 10.00m
Depth(M) : 4.50m
Light/loaded Draft : 2.77m/3.30m
Dissel Oil Capacity : 145.00tons
Freshwater Capacity : 65.58tons

Engine
M/E type/output/rpm/set : 6320zc-2/1213kw/428rpm/2sets
Fuel oil consumption : 198g/kw.h
Aux. Engine type/output/rpm/set : WD615.67CD/152kw/1500rpm/2sets
Aux. Engine at anchorage type/output/rpm/set : TD226B-2CD1/60Kw/1500rpm/1set
Generator type/output/rpm/set : 
TFXW-250L4-H/120kw/1500rpm/2sets
TFXW-225m4-H/50kw/1500rpm/1sets

Endurance : 2000 n mile

Speed : 12kn(designed)

Accommodation : 12 persons

Navaids : 
1NAVTEX,12SART,1VHF,1MHF,1Sound Echo,
1 Rudder indicator,1 Gyro compass, 1 Magnetic compass,1Radar, 1Satnavi.

Fire-fighting : Electric fir-fighting pump 1set,75kw,45m³/h,32.6m

Propeller : 2 Tube propeller/2060mm/Cu,Alum.,Mang. Alloy

Air conditioner : center air conditioner

Hook/Pull Ballard Capacity : 35tons/35tons

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------
Search words(for official use only) : 
Tug For Sale, 
Tugboat 2 x 1650hp For sale
Tug 2006 Built for sale
2006 Built Tugboat For Sale

-----------------------------------------------------------------
 
2 x 2040hp Tug Boat For Sale
Worldoils Marketplace
2 x 2040hp Tug Boat For Sale

Worldrigs ID: WR136

Tug Boat For Sale

Description:


Type of Ship : Harbour and towing Tug Boat with FiFi
Built Year : 18 Oct,2008
Class : ZC

Navigation/service area : Coastal/A1
GRT/NRT : 493t/147Mt

Dimensions
Loa : 38.80 m
Lpp : 35.00 m
Breadth (M) : 10.20 m
Depth(M) : 4.80 m
Draft(light/loaded) : 2.65/3.43 m
Light/loaded displacement : 714.90/1019.40 Mtons
Material(hull/deck) : Steel/steel

Engine
M/E(type/output/rpm/set) : G8300zc6B,1500kwx500rpm,2sets, Made in Wuxi,China

Aux.(type/output/rpm/set) : 
495AZD/35.30KW/1500RPM,/1sets, Made in China
6135Zcaf/1330KW/1500RPM/2sets, Made in China

Generator(type/output/rpm/set) : 
STC-30/30KW/1500RPM/1sets, Made in China
T2H2XV-120-2/120kw/1500rpm/2sets, Made in China

Bow thrust : Fitted

Oil : Light oil

Navaids : 
1 STR6000,1 FT1500,1 H3E/H3E/J2B/F1B,1 SAR-9, 
1 SEP-406,2 STV160,1 GPS,/2 MAGNETIC COMPASS, 1 SOUNDER ECHO

FiFi : Main fire pump 3BA6/60m³/h/0.50Mpa, Fire extinguisher 11sets,others 6uints

Propulsion : 1 Gear 1.757:1,2 stern shaft Dia.240mm,2 Dia.2000mm fixed Cu propeller

Annual survey : 27 Sept.,2009

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

--------------------------------------------------------------------------------------------------------
Search words (for official use only) -
Tug Boat - 2 x 2040hp - For Sale
2008 Built Tug for Sale
Tug Boat 2008 Built For Sale
Tug For Sale 

--------------------------------------------------------------------------------------------------------

 
T4W Drilling Rig For Sale
Worldoils Marketplace
T4W Drilling Rig For Sale

Worldrigs ID: WR463

Drilling Rig T4W For Sale
T4W Drill Rig For Sale

1984 T4W
70,000 pull back
900/350 air
12V71 on deck
3208 cat in carrier
good tires
set-up to run 2 7/8 IF rods
300 ft of rods
more rods avalible
some toolling and extras
serial #14042

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


Land Drilling Rigs

-----------------------------------------------------
Search words(for official use only) - 
Drill Rig T4W For Sale
T4W Drilling Rig For Sale

-----------------------------------------------------
1984 Built Ideco Rambler Rig for Sale
Worldoils Marketplace
1984 Built Ideco Rambler Rig for Sale

Worldrigs ID: WR2759

Ideco Rambler Workover Rig for sale
1984 Built Ideco Rambler Rig for Sale


1984 Ideco Rambler Rig, Model BIR-3185 Five Axle Carrier


Specifications

Single Drum H-35 Drawworks with 1” drill line
96’ x 215,000#  Ideco Derrick with rods & tubing racking boards
Detroit Diesel Series 60, 475 HP engine
Traveling Block, Ideco DS110, slotted speed kit design, 2 sheaves, 110 ton

Foundation, iron stands on 3” x 12” timbers
Allison CLT5860 Transmission
Hydromatic Brake, 15” double rotor with water tank
Tong, Gill Model 500 with back up head
Blowout Preventer, Townsend Type 81, 7-1/16” x 5000 psi. double stack
Stripper Head, Hall style 1500 psi.

Tubing Slips, Guiberson 60 ton air operated
Rod Elevators, 5/8” to 1”
Tubing Elevators, 2-3/8” to 2-7/8” EUE
Wash Swivel, King 53GA
Hand Tools

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------
Search words (for official use only) :
Ideco Rambler Workover Rig for sale
1984 Built Ideco Rambler Rig for Sale
BIR-3185 Five Axle Carrier Rig for Sale
Ideco Rambler Rig - Model BIR-3185 - For Sale
Workover Rig - 1984 Built - For Sale
Land Drilling Rig for Sale

-----------------------------------------------------------------
 
National Oilwell Carrier Workover Rig - 2007 Built for Sale
Worldoils Marketplace
National Oilwell Carrier Workover Rig - 2007 Built for Sale

Worldrigs ID: WR2760

National Oilwell Model 5C Five Axle K100C Carrier Rig for Sale
National Oilwell Carrier Workover Rig - 2007 Built for Sale


Description :

Single Drum D500  Drawworks with 1” drill line
104ft x 250,000# National  Derrick with rods & tubing racking boards
Detroit Diesel Series 60, 500 HP engine
Allison S5610H Transmission with drop box
Traveling Block, Ideco DS110, slotted speed kit design, 2 sheaves, 110 ton
Foundation, steel scissor beam on 3” x 12” timbers
Disc Assist Brake, model 54, 48” mounted  at the drum
Tong, Gill Model 500 with back up head
Blowout Preventer,  Townsend Type 81, 7-1/16” x 5000 psi. double stack
Stripper Head, Hall style 1500 psi.
Tubing Slips, Guiberson 60 ton,  air operated
Rod Elevators, 5/8” to 1”
Tubing Elevators, 2-3/8” to 2-7/8” EUE
Wash Swivel, King 53GA
Hand tools

Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


------------------------------------------------------------------------------------
Search words (for official use only) :
Used Workover Rig - 2007 Built for Sale
2007 Built National Oilwell Model 5C Five Axle K100C Workover Rig
National 5C Workover Rig for Sale
National 500 HP Workover Rig for Sale
Land Drilling Rig - National 500hp - for Sale in USA

------------------------------------------------------------------------------------
 
Alta 1500 HP AC/VFD Drilling Rig for sale
Worldoils Marketplace
Alta 1500 HP AC/VFD Drilling Rig for sale

Worldrigs ID: WR2757

Alta 1500 HP AC/VFD Drilling Rig for sale
1500HP AC/VFD Rig for sale


Mast
Clear Height : 142’
Max. Static Hook Load (12 Lines) : 800,000 lbs
Max. Wind Capacity : 75 knots

Substructure

Floor Height : 25’
Clear Height : 20’-6”
Rotary Capacity : 800,000 lbs
Setback Capacity : 600,000 lbs
Hole Opening : 37-1/2”

Top Drive
Max. Static Hook Load Rating : 500 tons
Max. Speed : 265 rpm
Max. Intermittent Torque : 71,000 ft-lbs
Max. Continuous Torque : 51,400 ft-lbs
Pressure Rating : 7,500 psi

Drawworks
Rated Capacity : 1500 hp
Max. Capacity (12 lines) : 800,000 lbs
Drum Groove : 1-3/8”

Mud Pumps
Input Horsepower Rating : 2,200 hp
Maximum Pump SPM : 120 rpm
Maximum Liner Size : 9”
Minimum Liner Size : 5”
Stroke : 14

Power Generation
Generator Power : 1350 kW @ 1200 rpm
Engine Power : 1476 HP @ 1200 rpm

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


------------------------------------------------------------
Search words (for official use only) :
Alta 1500 HP AC/VFD Drilling Rig for sale
1500HP AC/VFD Rig for sale
Land Drilling Rig for Sale
Used Drilling Rig - Alta 1500HP - For Sale
AC/VFD Rig for Sale

------------------------------------------------------------
Taylor C550 - Land Workover Rig
Worldoils Marketplace
Taylor C550 - Land Workover Rig

Worldrigs ID: WR502

Taylor C550 Double Drum Workover Rig for Sale
Used Taylor C550 Workover Rig


Drawworks :
2007 Model Taylor C550 Double Drum Workover Rig with 16,000’ of 7/16”
swab line, with 475 HP Cat engines

Mast :
112’ Telescoping, 240,000# Capacity

Carrier :
5 Axle carrier unit

Substructure :
10’ Taylor hydraulic floor with working height of 8 to 12’ and a
substructure ragted at 300,000#

BOP :
11” x 3000# LWS Shaffer 5K double ram and annular

Water Tank :
200 BBL work tank

Handling System :
5K pump Iron

Handling Tools :
BJ tongs for tubing and sucker rode & Kavin Slips

Ancillary Equip :
Complete with pipe racks and cat walk

Office Capacity :
Complete with portable office for service companies, with enough
desk space for four people, I.e. directional personnel

Drilling Components

Mud Pump (Main) :
PZ7 Main 550 HP mud pump with Detroit series 60 enging and 5- speed transmission

Mud Pump (Aux) :
Auxillary mud pump system – with 24 hour programs a 1000 HP
pump complete with one (1) Swaco Mongoose, one (1) Swaco Desander &
one (1) Swaco Hopper with two (2) 300 bbl tanks are available

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


Land Drilling Rigs


---------------------------------------------------------------------------------------------
Search words(for official use only) -  
Taylor C550 Double Drum Workover Rig for Sale
Land Rigs For Sale
Used Land Rigs For Sale
Used American Workover Rig
Used Taylor C550 Workover Rig
Workover Used Land Rigs For Sale

---------------------------------------------------------------------------------------------

 
1985 Built National 650HP Rig for sale
Worldoils Marketplace
1985 Built National 650HP Rig for sale

Worldrigs ID: WR2756

National 650HP Drilling Rig for Sale
2011 Rebuilt National 650HP Rig


General Description
Year Built/Rebuilt : 1985/2011
Estimated Drilling Depth : 8,200 ft
Estimated Rig Move Loads : 39
Estimated Camp Move Loads : 35
Rated HP : 650

Mast

Height : 113.00 ft
Static Hook Load Capacity : 286,000 lbs
Mast Racking Capacity : 10,000 ft

Substructure
Style : Telescoping
Height : 14.10 ft
Clear Height : 11.22 ft
Casing Capacity : 286,000 lbs
Maximum Setback Load (lbs) : 198,000

Drawworks

Make : National
Model : 4226D
Power Rating : 650 hp
Input Power : 1 ea Caterpillar D 3412
Drilling Line Size : 1 1/8"
Auxillary Brake : Parmac V-80

Top Drive / Power Swivel
No Top Drive

Swivel
Make : Upetrom
Model : CH 125
Capacity : 125 Ton

Rotary Table
Make : Upetrom MRS205
Table Opening : 20 ½
Maximum Load Rating : 350 Ton

Power Generation
Mechanical Rig

Mud System
Mud Pumps : 1 ea Upetrom 3PN-1000
Power Rating : 1,000 hp @ 150 spm
Pressure Rating : 5,000 psi
Active Mud Volume : 906 bbls
Reserve Mud Volume : 101 bbls
Shale Shakers : No Shale Shake, Mongoose
Mud Cleaner : N/A
Desander : N/A Brandt 10" X 2 Cones
Desilter : N/A
Centrifuge : N/A

Well Control

Annular : 9" 3,000 psi, Upetrom
Choke Manifold : Upetrom

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


----------------------------------------------------------------
Search words (for official use only) :
National 650HP Drilling Rig for Sale
1985 Built National 650HP Rig for sale
Used Drilling Rig for sale
Trailer Mounted Telescopic Rig - For Sale
2011 Rebuilt National 650HP Rig
650HP National Land Drilling Rig for Sale

-----------------------------------------------------------------
 
1600bhp Twin Screw Tug
Worldoils Marketplace
1600bhp Twin Screw Tug

Worldrigs ID: WR388

Twin Screw Tug For sale
1600HP Twin Screw Tug For sale
Used Twin Screw Tug For Sale


Type : Steel Twin Screw Tugboat
Built : 2001
Classification : NKK

LOA : 27.00 M
Registered Length : 25.82 M
Registered Breadth : 8.50 M
Registered Depth : 4.15 M
GRT / NRT : 217 / 66 Tons
Bollard Pull : 20 T

Main Engine :
2 X 800 HP Yanmar 6N165-EN @ 1400 rpm with Kort Nozzle
Estimated Speed : 10 knots
Aux Generator : 2 X 40 KW / 50 HZ Perkins Model: LJ35009-T4.236

Fuel Oil Capacity : 185 M3
Fresh Water Capacity : 45 M3
Ballast Capacity : 29 M3
Accommodation : 12 Crew

Navigation Equipment :
Marine Radar – JRC JMA-2253
GPS Navigator – Furuno GP-31
SSB MF / HF Marine Transceiver – Furuno FS-1503
VHF Marine Radio – Icom M IC-M45
VHF Marine Radio – Furuno FM-27
Color Fish Finder – Furuno FF-35
Navtex Receiver – Furuno NX-500
Magnetic Compass – Daiko

Towing Winch :
20 Tons Capacity with Holding Brake 60 Tons

Sewage Treatment Plan : Capacity - 15 persons

Fresh Water Maker : Yes

Air Condition :
Wheelhouse, Capt Cabin, C/E Cabin and Crew Compartment

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------------------
Search words(for official use only) :
Twin Screw Tug For sale
1600bhp Twin Screw Towing Tug for Sale
Used Towing Tug for sale in Asia
Towing Tug for sale
Towing Tug for sale in Singapore
1600 bhp Twin Screw Tug
Towing Tug from Malaysia

-------------------------------------------------------------------------------------------------------

 

Land Drilling Rig for Sale
Worldoils Marketplace
Land Drilling Rig for Sale

Worldrigs ID: WR2755

Corsair 550 HP Rig for Sale
Carrier Mounted Corsair 550HP Rig for Sale


General Description

Estimated Drilling Depth : 7,200 ft
Estimated Rig Move Loads : 44
Estimated Camp Move Loads : 35
Rated HP : 550

Mast
Height : 107.00 ft
Static Hook Load Capacity : 297,000 lbs
Mast Racking Capacity : 6,560 ft

Substructure
Style : Monobloc
Height : 12.92 ft
Clear Height : 10.36 ft
Casing Capacity : 297,000 lbs
Maximum Setback Load (lbs) : 198,000

Drawworks

Make : Corsair
Model : W5384E
Power Rating : 550hp
Input Power : 1 ea Caterpillar D3408
Drilling Line Size : 1"
Auxillary Brake : Parmac Inc D631974-X

Top Drive / Power Swivel

No Top Drive

Swivel
Make : Oilwell
Model : PC-150
Capacity : 150 Ton

Rotary Table
Make : Gardner Denver 17.5
Table Opening : 17 ½"
Maximum Load Rating : 150 Ton

Power Generation
Mechanical Rig

Enchancements
Power Slip Frame : Upetrom

Mud System
Mud Pumps : 2 ea Upetrom 3PN-1000
Power Rating : 1,000 hp @ 150 spm
Pressure Rating : 5,000 psi
Active Mud Volume : 1,060 bbls
Reserve Mud Volume : 117 bbls
Shale Shakers : 1 ea MI Swaco Mongoose
Mud Cleaner : N/A
Desander : N/A
Desilter : N/A
Centrifuge : N/A

Well Control
Annular : 13 5/8"  3,000 psi, Upetrom

Double Ram Preventer :
13 5/8"  3,000 psi, Upetrom,
9" 3,000 psi, Upetrom

BOP closing Unit : Upetrom

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------
Search words (for official use only) :
Corsair 550 HP Rig for Sale
Carrier Mounted Corsair 550HP Rig for Sale
Telescopic Mast Land Drilling Rig - For Sale
Mechanical Rig - Corsair 550HP - For sale
Land Drilling Rig for Sale

-----------------------------------------------------------------
 
Foremost DR-24 Drilling Rig for Sale
Worldoils Marketplace
Foremost DR-24 Drilling Rig for Sale

Worldrigs ID: WR2758

Foremost DR-24 Drilling Rig for Sale
Drilling Rig - Foremost DR-24 - For Sale

Model : DR-24 Drill Rig
Manufacturer : Foremost Barber
Year : 2001
Condition : Used

Description :

2001 Foremost DR-24 Drill Rig
Mounted on 2001 Freightliner Truck
Caterpillar C-15 Diesel Engine (rated 500 HP)
4,100 Hours as of 10/16/20
Atlas Copco 900 cfm / 350 psi Air Compressor
24” Diameter Dual Rotary Power Head
Set up for 2-7/8" IF Drill Rod and 6” Beco Rod
4 piston FMC Bean water injection pump

Oil injection system
Jaws 6, 8, 10, 12, 14, 16, 18, 20, 24 inch
Welding (Cage) Clamp 6, 8, 10, 12, 14, 16, 18, 20, 24 inch
Divertor for 4-1/2 inch Drill Rod with adaptors for 6, 8, 10,
12 inch casings
Divertor for 10-3/4 inch drill rod with adaptors for 12, 14, 16, 18,
20, 24 inch casings
Drive Shoes 6, 8, 10, 12, 14, 16, 18, 20, 24 inch
24 - 4-1/2 inch x 20 ft x 2-7/8 IF thread drill rods
6 - 10-3/4 x 20 ft x 6-5/8 Beco thread drill rods
1 – 10-3/4 x 15ft x 6-5/8 Beco thread drill rod
1 - 10-3/4 x 10ft x 6-5/8 Beco thread drill rod
2 – 10-3/4 x 5ft x 6-5/8 Beco thread drill rods
New Miller Welder

Oxy/Acetalene Torch Setup
1 – Petol wrench setup for 4-1/2" Inch drill rod and 6 inch hammer
1 – Petol wrench setup for 6-inch drill rod and 8 inch hammer
6” IR QL60 Drill Hammer with 4-1/2” x 15ft heavy wall lead steel with bit
8” IR QL80 Drill Hammer with 6” x 15ft lead steel with bit
IR QL120 Drill Hammer with 10-3/4" lead steel and subs and
12” bit 12ft - QL120 Bit
2-7/8" IF x 4-1/2" centralizer drill rod for 10" inch casing
24" Inch over the hammer centralizer for QL120 hammer
Cyclone diverter
5 Inch Concrete Discharges Hoses 15 ft
5 Inch Concrete Discharges Hoses 25 ft

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Foremost Barber DR-24 Drilling Rig - 2001 Built for Sale
Used Drilling Rig - Foremost Barber DR-24
2001 Built Foremost Barber DR-24 Drilling Rig
Land Drilling Rig - Foremost Barber - For Sale
Foremost Barber Used Drilling Rig for Sale in USA

-------------------------------------------------------------------------------------------------------
 
Maintenance Work Vessel for Sale - 75m 4400hp
Worldoils Marketplace
Maintenance Work Vessel for Sale - 75m 4400hp

Worldrigs ID: WR479

Maintenance Work Vessel for Sale
Offshore Maintenance Vessel for Sale
Maintenance Work Vessel for Sale - 75m 4400hp
4400hp Maintenance Work Vessel for Sale
Offshore Work Vessel for Sale

75m / 4400hp maintenance work vessel

Principal Particulars
Built : 2010
GRT/NRT : abt 3661/1098
Class : ABS
Notation :
ABS + A1, + AMS, (E) offshore support vessel,
DPS1, SPS code
Call sign : TBA

Dimensions
Length overall :75.00m
Length WL : 72.20m
Breadth Moulded : 20.40m
Depth moulded : 7.00m
Draft moulded : 5.50m
Deadweight : 2,609m/tons
Loaded draft : 5.20m

Machinery
Main engines : Wartsila 8L20, 2 x 1600kW at 1000 rpm
Gear box : Wartsila gear SCV50 ratio approx 4.42 : 1
Main genset : Caterpillar 3412C, 4 x 500ekW/415V/3ph/50Hz
Emergency genset : Caterpillar C4.4DIT, 84ekW/415V/3ph/50Hz
Bow thruster : Kawasaki, KT-88B3 CPP, thrust = 10
Propellers : LIPS, CPP Dia. 2200mm
Rudders : Becker high lift rudder
Stabilization system : Flume stabilization systems
Dynamic positioning system :
Marine Tech (MT), ABS DPS1 c/w independent Joystick

Capacities
Deck strength : 5 tonnes/sqm
Clear deck area : 650 sqm
FW tank : 774 cu.m
Fresh water tank : 700 cbm
Fuel oil tank : 998 cu.m
Lube oil storage : 18 cbm
Sewage holding tank : 15 cbm
Dirty oil tank : 15 cbm
Hydraulic oil tank : 15 cbm

Performance
Performance speed : 13 knots (90% MCR)
Type of fuel : MGO
Endurance : 50 days approx

Discharge Rates :
Fuel oil : 1 x 38 cbm/hr at 18m head
Potatble water : 1 x 60 cbm/hr at 40m head

Accommodation
Crews :
6 x 1 man cabins = 6 men
7 x 2 men cabins = 14 men
25 x 4 men cabins = 100 men
Total : 120 men cabins
Hospital : Two man hospital
Fully airconditioned

Deck Area
Deck cargo bay : TBA
Deck strength : As above
Clear deck area : As above
Deck cargo : 635m/tons

Radio & Navigation Equipment
GMDSS : for area 3 comprising :
SSB radio : 1 uit
Inmarset C : 1 unit
VHF radio : 2 units
Radar : 2 units
Echo sounder : 1 unit
Gyro compass : 2 units
Autopilot : 1 unit
Magnetic compass : 1 unit
Speed log : 1 unit
Navtex receiver : 1 unit
SART : 2 units
GPS : 1 unit
AIS : 1 unit
Satellite EPIRB : 1 unit
Portable VHF radios : 3 units
Weather fax : 1 unit
VDR : 1 unit
Inmarsat mini 'M' : 1 unit
Vessel also fitted with PA system, sound powered telephone system
and integrated internal communication system

Deck Machinery / Mooring System
Four (4) Point Anchor Type
Hydraulic mooring winch : Titan, single drum c/w spooling device
Drum capacity : 1500m length dia 38mm SWR
Brake holding (1st layer) : 100mt (Static)
Duty pull (1st layer) :
40mt x 0 ~ 10m/min
10mt x 0 ~ 30m/min
Type of operation : Electro-hydraulic
Tuggers : 2 x 10t @ 15m/min
Capstans : 2 x 5t @ 15m/min
Anchor windlass : 1 x 9.3t @ 9m/min, 48mm chain

Fire-Fighting Equipment
Firemain : 1 x firemain with 19 hydrants c/w 15m hoses
Fireman outfit : 2 complete fireman's outfit to SOLAS requirement
Fixed CO2 system : For engine room
Water mist system : For paint store
Fire pump @ fwd machinery 1 x 60 cbm/hr @ 60m hd room
Fire detection and alarm system in living spaces and engine room

Life Saving Equipment
Liferaft : 15men x 2 units
Lifebuoy : SOLAS standard, 8 nos
Life jackets : 150 nos.
Rescue boat : 1 x 6 men acc SOLAS
Liferboat : 2 x 60 men

Others
Water maker : 2 x 20 tons/day Reverse Osmosis Type (RO)
Sewage treatment plant : 1 x 120 men
Deck crane :
1 x Favelle Favco Lattice boom pedestal
crane 40mt - type API specs 2C
Oily water separator : 1 x 1 cbm/hr
Provision crane : Titan, 1 x 2T @ 12m outreach
Moonpool : L5M x W4.8m

Price & terms : Please enquire using the email form below

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
-------------------------------------------------------------------------------------------------------------------------------------------
Search words(for official use only) -  
Maintenance Work Vessel For Sale
4400hp Maintenance Work Vessel For Sale
75M Maintenance Work Vessel For Sale in Middle East
Maintenance Work Vessel For Sale in Nigeria, West Africa
75M Maintenance Work Vessel For Sale in South America

4400hp Maintenance Work Vessel For Sale worldwide
Maintenance Work Vessel For Sale in Asia, Singapore, Malaysia

---------------------------------------------------------------------------------------------------------------------------------------------

Yacht Scale Model
Worldoils Marketplace
Yacht Scale Model

Worldrigs ID: WR246

Boat Models
Scale Yacht Models
International Models - Yachts


We make all kinds of International models as follows :
Ship scale models
Engineering scale models
Rig scale models
Offshore vessel models
Yacht Models

We can custom build any ship and any scale such as :
1:500
1:400
1:300
1:200
Other scales also

We can build made-to-order models

Please see clear photos on : http://www.worldoils.com/models/models.php

If you are interested in the models, please contact us on email address : mail@worldoils.com

--------------------------------------------------------------------------------------------
Search Words (for official use only) :
Gift Yacht Models
International Yacht Models
Gift Boat Models
Scale Models of Yachts
Pleasure Boat Models
Yacht Models for sale

---------------------------------------------------------------------------------------------
 
CTU for Sale
Worldoils Marketplace
CTU for Sale

Worldrigs ID: WR435

Coiled Tubing Unit for Sale
CTU for Sale

2013 Built Trailer Mounted Coiled Tubing Unit

1.0 General Description
1.1 All components are brand new and not used.
1.2 All equipment has reasonable load distributing. The whole equipment has
the capacity of shock resistance and rough road running. The unit is suitable
for driving in rough terrain of oil fields and common highway.
1.3 Control system, instrument box and related devices have nice sealing performance,
water proof and shock resistance.
1.4 All equipment is capable of operation in ambient temperatures of -30°C to 45°C.
1.5 All equipment is located reasonable, which is easy for operation, checking and
maintenance, caution marks for deck equipment and completed protection device for
uncovered running components and high temperature components. All discharging ports
point to safety position and are built under standard of HSE.
1.6 All related documents will be provided.
1.7 All equipment is built under the quality standards of API/ASME/NEC/ISO.
1.8 All equipment is well designed and constructed for safety operation of operators. Welding
department should have nice quality and enough strength. Self-lock nuts should be use as
much as possible.
1.9 All electrical circuits have code marks and all hoses have S/No. labels, which is easy
for connection with related connector.
1.10 All hoses and electrical wires are packed steadily, complete with clips for support
and fasten.

2.0 General Structure and Technical Specification

Components
Specification
Qty
Trailer
four axle trailer
1
Power Pack Engine
1
Control Cabin
Closed Type
1
Injector
ZRT-80K, with 100gooseneck
1
Reel Assembly
LGGT150”-78”-78
1
Injector Control Hose
40m (130ft)
1
Injector Power Hose
40m (130ft)
1
BOP Control Hose
40m (130ft)
1
Hydraulic System
 
1
Air Circuit System
 
1
Stripper
4.0610000psi
1
BOP
4.0610000psi
1
Electrical System
 
1
Lubrication System
 
1
Digital Data Acquisition
 
1

 The Trailer Mounted Coiled Tubing Unit is composed of four axle trailer,hydraulic system,
reel, power pack,injector, injector control hose reel, injector power hose reel, lubrication system,
electrical system, control system, instrument control cabin, wellhead control equipments
and so on. The Trailer Mounted Coiled Tubing Unit is used for many oilfield services applications
like gas lift, acidizing , fracturing and so on.The operation of the Trailer Mounted
Coiled Tubing Unitis centralized in or around the control panel in control cabin, which can ensure
the operator can easily and clearly monitor all control switches, instruments and the working
condition for all systems. Lights are installed above the reel and engine, which are easy
for night working.

CTU Performance Parameters :

 
Injector Continuous Pulling Capacity
 
80,000 lbs (36,000Kg)


Injector Continuous Snubbing


Capacity

 
40,000 lbs (18,000Kg)
 
Max. Speed of the Coil Tubing

190ft/min(58m/min
Total Weight
Approx. 39,000kg(86,000 lbs)
(without tubing and tractor)
Overall Dimension(L×W×H)


A
pprox.16,000mm × 2,600mm × 4,450mm
(630in × 102in ×175in) (without Tractor)
 
 

3.0 Trailer
Frame Rating : 66,000kg (145,500lbs) maximum capacity without trailer
Dimensions : 15,240mm(length) X 2,600mm(width) (600in X 102in)
Gooseneck : 3.5? kingpin
Axles : four axles, 22,700 Lbs /axle. capacity
Tires : sixteen (16):275/70 R22.5
Other : equipped with ABS
Voltage : 12V

4.0 Power Pack
DDC S60 turbocharged diesel engine,525hp@2100rpm,4 stroke, 6 cylinder,
detailed specification is as following :
- Electronic Engine Management System
- Equipped with starter(Anti-explosive battery. Air starter for diesel lubrication of starting device
and 30 gal air receiver tank?12 CF air compressor fixed with engine.Alternator
- Horizontal muffler,with rain cap
- Heavy duty air cleaners (for desert) with restriction indicator
- Equipped with emergency kill
- Bendix 0.37m3/min air compressor and air system that will include an air receiver, air dryer,
water separator, air filter, bleed valves, check valves, control valves, gauges and hoses.
Air compressor will maintain 0.8 Mpa in the air receiver tank.In addition, a connection will be
provided for remote charging of the air tank.
- Spark arrestor and Emergency shut off system
- Diesel oil tank Volume: 500L
- Hydraulic system:
- Main hydraulic system: injector is driven by variable displacement, axial hydraulic pumps.
- Tubing reel driven hydraulic system: independent hydraulic pump will provide power
for the coiled tubing reel drive motor.

- Auxiliary hydraulic system: separate pressure compensating pump provides power
for following system :
hose reel hydraulic motor, level wind hydraulic motor, level wind lifting  hydraulic cylinder,
injector traction and tension system, BOP control system.
Level wind compelling hydraulic motor
Level wind height control hydraulic cylinder
Flexible Hose hydraulic motor
Control cabin lifting cylinder
BOP hydraulic cylinder
Injector chain tension system
Injector chain traction system
Injector speed adjustment system

Handle pump system: handle pump system is installed in control cabin, which is used
to provide emergency power for BOP ram, stripper and injector chain traction system
- Energy accumulator system: this system is installed in hydraulic power pack.
4 high pressure nitrogen reservoirs can provide spare power for BOP control system.
- The capacity of each accumulator is 10 gallons ( 37.85L)
- Except above mentioned parts, the hydraulic system also contains followings :
Hydraulic Oil tank with temperature gauge and level indicator.
Gauges of hydraulic pressure
Oil cooling system
Hydraulic system returning loop filter
Necessary pressure relief valve, safety valve and hydraulic hose
- The hydraulic power pack is skid mounted and has a four point lift protective frame.
- Carbon steel hydraulic oil tank capacity: 650L

5.0 Control Cabin
- The unit will be fully operational from the operator’s control cabin with the use of
mechanical, hydraulic and pneumatic controls.
- The control cabin will have four hydraulically lift cylinders to elevate the cabin for
ease of visibility over the tubing reel.
- Long type control cabin. The long type cabin is professionally designed for quiet
comfort and to provide a safe operating environment for the operator and customer.
- This control cabin design will feature :
- Door will have heavy duty lockable latch
- Safety glass installed on all four sides of control cabin : front window with safety
guard screen and windscreen wiper,  the back side door with fixed  window and 
both sides supplied with large area emergency slide windows
- A complete lighting and electrical system with all necessary plugs and switches
will be installed.
- Operator’s chairs, etc. will be installed in the control cabin.
- Heavy-duty rubber insulated floor covering, fire resistant.
- The Control Cabin will be heated and cooled by a high capacity rear mount air
conditioning and heating unit. The air conditioning and heating unit shall provide
adequate cooling and heating for the operating temperature range of the unit.
- Four (4) flood work lights will be installed on the outside of the
Control Cabin (two (2) at the rear facing the tubing reel and
two (2) in the front).

- Standard equipment in the control cabin will be :
Stainless steel console and panels
- LED Internal indirect lighting system
- Captain’s chair mounted behind control console
- Control cabin is equipped with external alarm horn controlled from the
control cabin.
- All hydraulic connections to and from the control cabin will be via a
hydraulic bulkhead.
- An air driven pump used to deliver 5,000 psi to the stripper over the 3000 psi system
pressure. This pump also has a handle and can be used as a second
manual back-up pump.
- A full control console will be installed in this cabin. This console will be of
stainless steel construction and be fully labeled with all gauge and control information.
The panel will be mounted on an engineered fabricated housing that incorporates the
back-up pump, hydraulic valves, interface, etc.

- The following controls and gauges will be installed in this control console:
Weight indicator to be Metric (Kilograms) and pounds
Well head pressure gauge in Megapascals or PSI
Circulation pressure gauge in Megapascals or PSI

Engine controls and gauges :
Engine EDM Display Module to provide the following information :
tachometer/hourmeter readout
engine oil pressure & temperature readouts
water (coolant) temperature readouts
Engine throttle
Engine normal stop
Engine emergency stop
System air pressure
Fuel level gauge

- Injector controls :
In/out control hydraulic joystick with friction detent
- Speed control regulator valve for maximum and minimum injector motor
displacement contr
- Three sets of the traction circuit valves to secure the traction of the coiled tubing.
These valves are indicated as upper, middle and lower allowing
- Each traction control valve has an individual pressure gauge
- Traction pressure regulator valve with regulated pressure indicator
- Chain tension control valve with individual pressure indication, “Pressure,
Run and Dump”
- Chain tension regulator valve
- Injector drive pressure gauge glycerin filled
- Injector Emergency Brake control

BOP controls :
- BOP ram/auxiliary control bank valve – quantity of nine (9).
- BOP safety control valve
- Stripper packer hydraulic control valve and a quantity of two (2) pressure gauges
- Installed at base of control panel will be two (2) hydraulic hand pumps
with auxiliary hydraulic reservoirs
- Tubing reel controls and gauges :
Tubing weight indicator
Tubing reel tension (speed) control valve
Tubing lubricator control
Additional cabin controls and information:
Light switch
All pressure gauges to be Metric (Megapascals) or PSI

6.0 Tubing Reel
Tubing reel is installed in the trailer and adopts embedded structure. The parameters are :
Tubing Reel Flange O.D. – 150″
Core Dia. of Drum: – 78″
Tubing Reel Width – 78″
Max. Reel Capacity 2″– 6300m

Reel Support Frame
The reel supports are fixed a-frames that are skid mounted and attached to the trailer
via pins. Each a-frame includes a bearing carrier which is pad mounted on the top
each a-frame upright to provide spool change capability. This feature allows the reel
to be either raised out of or lowered into operating position from one location.

Reel Drive
The driving system of the tubing reel includes motor and gearbox, which are installed
on the road side of the trailer. Complete with one quick joints connection plate, which
is easy for the connection of the reel and hydraulic power.

Rotating Joint and High Pressure Manifold
The high pressure manifold includes swivel joint, piping. Rotating swivel joint and
piping will have a maximum working pressure of 15,000 psi, integral figure 1502 union
will be flanged to inside of pump-through shaft for connection to tubing.
Level Wind :
Level wind assembly will allow tubing angle to vary from a minimum of 10° up to a
maximum of 85° elevation (from horizontal), and is raised and lowered via
hydraulic cylinders. Pivoting guide is designed to allow easy tubing installation.
Pivoting guide can be used with either mechanical or electronic encoder for
counting tubing depth metering. The tubing counter will adopt a “V” Roller design
to accommodate tubing sizes from 1 ¼″to 2 7/8″O.D. tubing. The mechanically
controlled level wind system will track down from 1 ¼″to 2 7/8″ tubing during
pay-in / pay-out operations and includes a manual override control.
Lubrication System :
A remote control pneumatic tubing lubrication system mounted at the rear of the
counter. The lube oil reservoir is located between the tubing reel and power hose reel.

7.0 Hydraulic Power Hose Reel and Hose
- One BOP control hose reel has 20 ports. Length of the control hose is 40 m (130 feet).
- One injector control hose reel has 20 ports. Length of the control hose is 40 m (130 feet).
- One injector power hose reel has 2 sets 1-1/2″X 40m (130 ft), 5000psi hose.
- This hose reel is hydraulic driven with local hydraulic control valve.

8.0 Injector Head
- Model:JR-ZRT80K
- Continuous Pull Capacity:80,000 lbs
- Continuous Snubbing Capacity:40,000 lbs
- Maximum Speed:190ft/min

Patent grippers adopt removable design. Suitable for coiled tubing size from 1.25″to3.5″.
This injector is capable of 2″OD Coiled Tubing.

- Out frame support can bear 90,000lbs snubbing or pulling load.
- Dual planetary gear transmissions are designed specifically for coiled tubing unit application.
- 2 sets of variable displacement, axial piston hydraulic motors.
- Counterbalance safety valves are installed in hydraulic motor or distribution manifold.

Modular brakes are mounted between the motors and gearboxes and are spring
applied/pressure released.

- All chain gears have induction high hardness gear.
- Spline top drive has fixed axis and chain gears.
- Inline bearing traction system is suitable for traction strength reaches top and
the grippers will have no dislocation.
- 3 sets(6 each traction oil cylinder adopt inside installation design.
- Pocket accumulator is installed in traction loop.
Injector chain lube system is activated by chain running. Completed with measuring pump
can realize best lubrication and less lube oil waste.
- Fold down walkways will be provided.
- A fall protection device will be provided on the injector
- 100″gooseneck

9.0 Wellhead Equipment (Optional)
All the wellhead control equipments are J&N make.

9.1 BOP -4.06"
For 2” Coiled Tubing
Working Pressure:10,000 PSI
H2S service. All metals in contact with well fluids per NACE MR-01-75
Top End:4.06” 10,000 BX-155 Studded Flange
Lower End:4.06” 10,000 BX-155 Open Flange
Side Outlet:2.06” 10,000 BX-152 Studded Flange

9.2 Side Door Stripper- 4.06"
For 2” Coiled Tubing
Working Pressure:10,000 PSI
H2S service. All metals in contact with well fluids per NACE MR-01-75

9.2 Side Door Stripper- 4.06"
For 2” Coiled Tubing
Working Pressure:10,000 PSI
H2S service. All metals in contact with well fluids per NACE MR-01-75

10.0 Digital Data Acquisition Package (CTDASP)
- JK-CTDASP integrates standard Coiled Tubing Data Acquisition System with a
personal computer interface and is preloaded with report software and designed
for operator convenience and portable applications in harsh oil field environments.
- This new system provides customers with a single integrated solution where
previously a DAS suitcase, a laptop PC computer and related software programs
were required to perform the same job.

- This CTDASP system, with the software that is installed is capable of 
accepting/processing the following data from the unit mounted sensors :
Coil Tubing Depth and Speed
Circulating Pressure
Well head pressure
Fluid Pumping Rate/Total
Any other additional information

- Data Acquisition Software have the following features:
Local real time data and time indication
Real-time recording
Append and pause files during operation
Multiple channels input
User-defined X-Axis
Zoom and scroll functions on graph
Elapsed time and reset
Process real time/replay data

10.1 Software Function
- Display real time data by real time numerical value
- Display real time data by curve
- Download historical data in memory card
- Separate historical data into different data document according to time interval
- Display curve by horizontal and vertical ordinate, user can choose favorite one
- Check data easily: the real time data and historical data display by curve and data
- Dynamic loading historic data, reappear site job condition
- Easy for choosing coordinate axis
- Coordinate axis can be added and deleted, no effect for data curve
- Data curve can be adjusted to display and hide, easy for data analysis
- Coordinate axis can be zoomed and rolled, check data curve by rolling coordinate axis
- Supply command of Zoom to Fit for all coordinate axis
- In support of common printer, as well virtual PDF printer, can print curve and 
data into PDF Form

11.0 Painting
Procedure:
- All steel parts will be sand blasted to white metal
- Primer will be zinc rich
- Middle paint
- Surface will be industrial polyurethane paint
- The painting color will be confirmed by customer. the control cabin color is white

12.0 Documentations
- Operation and maintenance manual for skid mounted coiled tubing unit.
- OEM Operation and maintenance manual for diesel engine.
- Manufacturer’s installation operation and maintenance literature for all CTU’s major parts.
- Qualified certificate of equipment conformance to customer specifications.
- Qualified inspection certificate of equipment.

13.0 Tools and Spare Parts
Digital Multimeter 1 Pc
13 pieces electron tools kid 1 Set
Metric Combination Wrenches Kit (8-24mm ) 1 Set
English Combination Wrenches Kit(1/4"-7/8" ) 1 Set
Metric Inner Hexagon Spanner Kit(1.5-14mm) 1 Set
English Inner Hexagon Spanner Kit(1/16”-3/8”) 1 Set
Monkey Wrench(12”) 1 Pc
Special Handle Grease Gun 1 Pc
Hydraulic Oil Tank Return Oil Filter Element 1 Set
Hydraulic Oil Tank Suction Filter 1 Set
Engine Oil Filter 1 Set
Engine Diesel Filter 2 Set
Engine Air Filter 1 Set

14.0 Warranty
Warranty period for the unit is one year (from the day the unit arrived at the customer’s).

15.0 After sales services
We will provide After-Sales Service in the capacity of spare parts procurement.
In the event that parts become obsolete, We will assist in locating suitable replacements.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed

--------------------------------------------------------------------------------------------------------------------
Search words(for official use only) - 
CT Unit for Sale
2013 Built CTU for Sale
Trailer Mounted Coiled Tubing Unit
Coiled Tubing Unit 2013 Built for Sale
 
--------------------------------------------------------------------------------------------------------

 
Cooper 350 Mechanical Rig for Sale
Worldoils Marketplace
Cooper 350 Mechanical Rig for Sale

Worldrigs ID: WR2753

Cooper 350 Mechanical Drilling Rig
350HP Trailer Mounted Land Drilling Rig for sale


General Description
Make : Cooper
Estimated Drilling Depth : 5,000ft
Estimated Rig Move Loads : 38
Estimated Camp Move Loads : 35
Rated HP : 350

Mast
Height : 104.00 ft
Static Hook Load Capacity : 176,000 lbs
Mast Racking Capacity : 3,600 ft

Substructure
Style : Telescoping
Height : 12.92 ft
Clear Height : 9.82 ft
Casing Capacity : 176,000 lbs
Maximum Setback Load (lbs). : 132,000

Drawworks
Make : Cooper
Model : 4210-3808
Power Rating : 350 hp
Input Power : 1 ea Caterpillar
Drilling Line Size : 1"
Auxillary Brake : Parmac 122

Top Drive / power Swivel : No Top Drive

Swivel
Make : Upetrom
Model : CH 125
Capacity : 125 Ton

Rotary Table
Make : Ideco 17.5
Table Opening : 17 1/2
Maximum Load Rating : 150 ton

Power Generation
Mechanical Rig

Mud System
Mud Pumps : 1 ea Gardner Denver 1PY-172
Power Rating : 1,000 hp @ 130 spm
Pressure Rating : 5,000 psi
Active Mud Volume : 906 bbls
Reserve Mud Volume : 101 bbls
Shale Shakers : 1 ea Upetrom
Mud Cleaner : N/A
Desander : Upetrom 2" X 12 Cones
Desilter : Upetrom 3" X 6 Cones
Centrifuge :  : N/A

Well Control
BOP Closing Unit : Upetrom

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------
Search words (for official use only) :
Cooper 350 Mechanical Drilling Rig
350HP Trailer Mounted Land Drilling Rig for sale
Cooper 350 - Telescopic Mast Rig for sale
Land Drilling Rig for Sale
Mechanical Rig for Sale

------------------------------------------------------------------------
Bulk Carrier For Sale
Worldoils Marketplace
Bulk Carrier For Sale

Worldrigs ID: WR129

2500T DWT Bulk Carrier for Sale

Description


DWT :  2500 tons
Built : 1986
Class :  ZC

GRT/NRT : 1505 / 959  tons
Loa X Lbp X B X D : 76.00 x 70.00 x 12.00 x  6.00 m
Draft : 4.95 m
Grain / Bale : 3500.70 CBM / 3230.80 CBM
Ho / Ha :  1/1
Hatch size : 42.00m x 8.00 m
Hatch Cover :  Steel
M/E :  HANSHIN 6LU28A,  1320ps@ 395 rpm
Consumption : CST120, 2.8 tons / day
Generator : (2 sets)Yanmar 6KFL-HT  220PS  440V144KW
Consumption : MDO  0.3 tons / day
Speed : 10 knots

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

------------------------------------------------------------------------
Search words(for official use only) : 
Bulk Carrier 2500T DWT For Sale
Bulk Ship For sale
1986 Built Bulk Carrier for Sale
Bulk Carrier for Sale
Bulk Ship 1986 Built For Sale

-------------------------------------------------------------------------

 
Offshore Accommodation Module with Helideck for Sale.
Worldoils Marketplace
Offshore Accommodation Module with Helideck for Sale.

Worldrigs ID: WR486

Offshore Accommodation Module with Helideck for Sale
Accommodation module including helideck for 50 persons
New Accommodation with Helideck For Sale

 
Technical specifications :
Accommodation module including top mounted helideck.
The accommodation module is designed and built for 50 persons but can be modified
on request.
This technical specification describes the scope of delivery of the complete
accommodation module.
4-level accommodation module for 50 persons
Complete steel structure. Total weight of module is approx. 551 tonnes
Dimensions (LxBxH): 20.8 m x 10.8 m x 20,3 m (excl stairways/platform)
15 cabins for 2 persons (12,2/9,25 m2)*
5 cabins for 4 persons (13,9/10 m2)*
Aluminum Helicopter deck on top of module designed for Sikorsky S-61N
Fully equipped
Classified as “SAFE AREA”
Classification and verification by Lloyds Register  
 
General
Design criteria
The design of the module is based on the following international rules, regulations
and specifications :
SOLAS – consolidated edition 2004
NMD regulations for Mobile Offshore Units
Lloyd’s Register of Shipping; MOU
International Maritime Organization (IMO) 1982 ed.
IMO Resolution A.486 (XII)
International Electrical Code (IEC)
DNV-OS-C101 (Structural only)
Purpose specific criteria for oa HVAC, Safety design philosophy, Living Quarter and
Helicopter-deck specification,
General design and outfitting.
 
Classification
Classification and verification by Lloyds Register The accommodation module is classified
as a ”SAFE AREA”. The full envelop of the accommodation module is fire rated for
a hydrocarbonfree environment.
 
Geometry
The footprint of the Accommodation module (excluding walkways and landing platform) is
20.8 m x 10.8 m.
The lay down area adds another 8 meters to the length.
Height from base to top of 4th level is 15.15m. Overall height including Helicopter deck is
20.3m from base.
The module is designed to be supported on minimum four points with footprint
12,0m x 10,5m.
The total weight of the module is 551 metric tons.
 
General Layout
The module comprises of four accommodation levels.
The base level has a lay-down area for two 10 feet containers.
On the roof level are located a plant room and a Local Equipment Room (LER).
On top is an aluminum helicopter deck. Two stair towers are fitted; one on each side
of the module.
All utility connections are located at the bottom of the utility shaft and in the control
room/ LER,allowing for easy hook-up of systems. Levels have following general layout :
Level 1 : Galley, Mess room, Cold store etc.
Level 2 : Cabins
Level 3 : Cabins
Level 4 : Control room, offices, and recreation rooms.
 
Documentation
The accommodation module will be delivered with complete as-built documentation
package includingoa drawings, test reports, certificates, weight report, Installation
& Operation Manual.
 
Structural
General
The accommodation module is designed and constructed as a four level building with a
plant room and LER at roof level. The helideck support structure is an integrated part of
the module’s skeleton. Two exterior stair towers are provided from 1st level to helideck
level. Roof and lay down area are provided with railing.
Primary steel is S335 J2G3 and secondary steel S235 J2 (with appropriate certification).
Accommodation is fully welded by qualified welders and in accordance with approved
welding procedures. 10% (random) MPI is executed on major beams.
 
Helideck
The helicopter deck is constructed from seawater resistant aluminum and has an
octagonal shape inscribed in a circle of 22.2 meter. It is fitted with safety netting and a
drain gutter around its perimeter. The support structure is constructed of hot rolled carbon
steel beams. The helicopter deck is certified for a Sikorsky S61N.
 
Lifting arrangement
The accommodation module and helideck can be lifted as one module. The 551 tonnes
module is lifted from lifting points at the top of the accommodation structure (roof). The
aluminium helideck is executed with hatches to accommodate access for the lifting gear.
Lifting columns and eyes are 100% MPI inspected.
 
Protective coating
All steel is blasted to SA 2½ and coated in shop primer. External steel is coated with
3-layer International® system; internal steel is coated with a 1-layer system.
 
Architectural
General specification
Inside of bulkheads and decks are provided with insulation and applied with interior wall
panels where applicable. Floors (steel or insulation tiles) are applied with levelling screed
and finished with either vinyl or seamless epoxy (in “wet” areas). All rooms are provided
with a cassette type false ceiling system. Windows are welded marine type and provided
with roller blinds or curtains. Internal stairway reaching from 1st to 4th level provided with
St.st. handrail on both sides.
 
Layout
The layout of the accommodation is as described below. Please find attached layouts for
more details. Complete inventory list is available.
 
Level 1
Locker room male
Locker rooms with 52 steel lockers, benches, hand wash basin, one shower, a urinal and
two toilets
Locker room Female
Locker room with 10 steel lockers, a bench, hand wash basin, one shower and one toilet.
Tea Room
Tea room (12 m2) with benches, a phone booth and a Kitchenette.
Mess Room
Mess room (45 m2) with 4 off 6-person tables, a serving counter, lockable cupboard and
overhead screen.
 
Level 2
Laundry
Laundry room (12,0 m2) with oa washing machine, tumble dryer, ironing board, washing
bin and shelves
Fitness
Fitness area (12 m2) . Fitness equipment not part of delivery.
Linen Store
Linen store room (4 m2) with steel shelving.
Fireman’s Outfit store
In corridor next to stairway.
10 x 2-Persons Cabins
10 off 2-person cabins (9,25 m2 excl bathroom), each cabin fitted with a double bunk bed,
a desk (1.4 x 0.6 m) with chair, an easy chair, a cupboard, a locker for immersion suit and
a bathroom.
 
Level 3
Health Office
Health office (14,7 m2) with desk, chair, bathroom, cupboard, inflatable bath, medicine
cupboard, examining couch and file cabinet
5 x 4-person cabin
5 off 4-person cabins (10 m2 excl bathroom), each cabin fitted with two double beds
(top is fold-away), a desk with chair, an easy chair, a cupboard, a locker for immersion suit
and a bathroom.
5 x 2-person cabin
5 off 2-person cabins (9,25 m2 excl bathroom), each cabin fitted with a double bunk bed, a
desk with chair, an easy chair, a cupboard, a locker for immersion suit and a bathroom.
Linen Store
Linen store room (4 m2) with steel shelving.
Fireman’s Outfit store
In corridor next to stairway.
2-person cabin
3D top view of 2 person cabin
Health office
4-person cabin

Level 4
Recreation Day room
Recreation day room (31 m2) with couches, easy chairs, coffee table, TV cupboard with
TV / DVD / Stereo,
book shelves with internet desk, phone booth and kitchenette with sink and mixing tap
Recreation Smokers Day room
Recreation smokers day room (25 m2) with couches, easy chairs, coffee table, TV cupboard
with TV / DVD / Stereo,book shelves with internet desk, phone booth and kitchenette with
sink and mixing tap
Control Room
L-shaped Control room (60 m2) with false floor (500 mm). Room is not outfitted at present.
Heli Lounge / Office
Office area (12 m2) with two desks with chair, two file cabinets and a cupboard for PSP.
Office 1
Office area (12 m2) with two desks with chair, a file cabinet and a white board.
Office 2
Office area (12 m2) with a corner desk with chair, a meeting table with six chairs, video
conferencing systemand a white board.
Toilets
Two separate toilets in the corridor.
Recreation day room
Control room with false floor
Heli lounge / office
Office / meeting room 

Safety & Fire Protection
Fire main system
A hose reel system is fitted throughout the accommodation at all levels. Two hose reels
per level and two hose reelsfor the helicopter deck. Fire water is to be supplied externally.
Fire & Smoke detecting system
On every level fire detectors and smoke detectors are installed
Portable extinguishers
Various classes A, B and C, (weights from 5 to 12kg) portable extinguishers are distributed
throughout the module.
For the helicopter deck 2 off 10 kg CO² extinguishers are provided.
Galley hood protection system
A “R-102” kitchen fire suppression system is installed in the galley hood and galley ducts.
Safety Signs
Safety signs (in the English language) and overall safety plan are installed inside the
accommodation module.
Corridors have fluorescent safety striping on low level.
Safety equipment
The module is fitted with the following safety equipment: Stretcher / 4 off Fireman outfit’s/
Supplement for firemen’soutfit / Helicopter deck rescue kit / First aid box / 4 off Eye wash
bottles / Fire blankets.
Helicopter deck foam system
A helicopter deck AFFF-foam system is installed. A twin agent 250 kg dry powder and
250 litres of concentrated foam are located near the helideck. (As per NMD)
Fire hose reel and fire detector in corridor
AFFF foam system near helideck
Stairway with st.st. handrailing and fluorescent striping

Price & terms : Please enquire using the email form below

If you cannot find the vessel, crane, rig or equipment that you need, please send us an
email to mail@worldoils.com stating your requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------
Search words (for official use only) - 
Offshore Accommodation Module with Helideck for Sale
Offshore Accommodation For Sale
Accommodation Block for Sale Accommodation with Helideck For Sale
Helideck for sale with the Accommodation module
Helideck for 50 persons for sale

-----------------------------------------------------------------------------------------

 
7000 cbm Trailer Hopper Suction Dredger For Sale
Worldoils Marketplace
7000 cbm Trailer Hopper Suction Dredger For Sale

Worldrigs ID: WR128

Trailer Hopper Suction Dredger for sale
7000cbm Dredger for sale

Description

7000 Cube Meter ZC Class Trailer Hopper Section Dredge-NB

Vessel’s Main Particulars
1. Length over all ~ 110.40m
2. Length bp 100.60m
3. Breadth mld 20.60m
4. Depth mld 8.50m
5. Design draught 5.50m
6. Dredging draught 6.80m
7. Soil load(in dredging condition) 7922t
8. Scanlting draght 7.7m
9. Deadweight at scanlting draught) 9696t
10. Max. dredging depth(Below light WL) 27m
11. Complement 36P
12. Main engine power 2×3088KW
13. Free Speed 12kn
14. Gross tonnage 5970
15. Height between decks:
16. Main deck to Poop deck 3.00m
17. Poop deck to Accomm. deck 2.70m
18. Accomm.deck to Boat deck 2.70m
19. Boat deck to Bridge deck 2.70m
20. Bridge deck to Compass deck 3.00m
21. Main deck to Forecastle deck appro. 3.00m
22. Hopper coaming 3.00m

Power Supply
1. Main Engine: 2 X G8320ZC18B 3088kW @ 650rpm Fuel: DO
2. Dredger pump engine: 2 X G6300ZC7B 1470 Kw @ 600rpm Fuel: DO
3. High pressure jet pump engine: 2 X XCW8200ZD 928 Kw @ 1000rp Fuel: DO
4. Diesel-generator: 3 X CCFJ396J-M10 400 Kw @ 1000rp Fuel: DO
5. Emergency: 1 X CCFJ120Y 120 Kw @ 1500rp Fuel: DO

Dredge Pump Parameter
1. Type: Changsha water pump manufacture co., ltd.---WNB1900(S)
2. parameter When Loading When Self-emptying
3. capacity 10300 m3/h 9000 m3/h
4. waterhead 21 m 32m
5. speed 255 r/min 300r/min
6. power 1000KW 1400KW
7. Suction pipe diameter DN800mm
8. discharge pipe diameter DN750mm

High Pressure Jet Pump
1. Two high pressure jet pump shall be equipped for draghead high pressure flushing
and sel-emptying . The jet pumps are as follows:
2. Capacity 3200m3/h
3. Waterhead 84m
4. Speed 1500r/min
5. Power of shaft 861.2KW
6. Suction pipe diameter DN500mm
7. Discharge pipe diameter DN400`mm

Design Load Capacity
1. Soil 7180.8t
2. Diesel oil 500t (max 1140.6t)
3. Lub. Oil 25t (max 89.6t)
4. Fresh water 180t (max 237.5t)
5. Supplies and stores 20t
6. Crew and luggage 5t
7. Provision 3t
8. Sewage 8t
9. Total 7921.8 t

Dredging Character

Maximum Dredging Depth
In light condition, suction pipe at 45 degree , the dredging depth is 27 m below light
water line.

1. Loading Time
Dredge middle hardness fine sand, depth 27m, with double suction pipe, the
charging time I-s approximate 65 minutes.

2. Dump Time
With jet water, dumping time is 5 minutes

3. Hopper Capacity
Maximum hopper capacity is 7203 cubic meters, the level of soil is below the hopper
coaming top 800mm.(overflow wier highest place)

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------------------------------------------------------------------------
Search words (for official use only) - 
7000cbm Trailer Hopper Suction Dredger 
Dredger for sale
Trailer Hopper Suction Dredger 7000cbm For Sale
----------------------------------------------------------------------------------------------------------------------------------

2000 Caterpillar 994D Wheel Loader for Sale
Worldoils Marketplace
2000 Caterpillar 994D Wheel Loader for Sale

Worldrigs ID: WR606

Caterpillar 994D Used Wheel Loader For Sale
2000 Built Mining Equipment - Caterpillar 994D Wheel Loader


Year : 2000
Manufacturer : CATERPILLAR
Model : 994D
Condition : Used

22 CYD BKT, 49.5-57 Tires, Good Unit
Hours : 53,508
Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------
Search words (for official use only) - 
Caterpillar 994D Used Wheel Loader for Sale
Mining Equipment Caterpillar Wheel Loader
Used Caterpillar Wheel Loader for Sale
Wheel Loader for Sale in USA
2000 Caterpillar 994D Used  Wheel Loader
Caterpillar Wheel Loader for Mining

-----------------------------------------------------------------


 
Victory Trailer Mounted Drilling Rig - 2009 Built - For Sale
Worldoils Marketplace
Victory Trailer Mounted Drilling Rig - 2009 Built - For Sale

Worldrigs ID: WR2754

Victory Trailer Mounted Telescopic Mast, Double Rig for Sale
Victory Trailer Mounted Drilling Rig - 2009 Built - For Sale


General Description                                           
Make : Victory               
Year Built/Rebuilt : 2009               
Estimated Drilling Depth : 12,000 ft               
Estimated Rig Move Loads : 48               
Estimated Camp Move Loads : 4               
Rated HP : 850               

Mast                                           
Height : 105.00 ft               
Static Hook Load Capacity : 350,000 lbs               
Mast Racking Capacity : 12,000 ft

Substructure                                           
Style : Telescoping                
Height : 20.00 ft               
Clear Height : 17.00 ft               
Casing Capacity : 440,000 lbs               
Maximum Setback Load (lbs) : 375,000   

Drawworks                                           
Make : TSM 
Power Rating : 850 hp                                                                                                     
Brake Type - Band or Disc : Disc                                           
Drilling Line Size : 1 1/8"                                           
Auxillary Brake : TSM 236H SSB 90#RL W/CVCP                                                                                        

Top Drive / Power Swivel
Make : Victory Rig Equipment
Model : VRT200H                                           
Capacity : 200 Ton                                               
Torque - Continuous : 16,000 ft-lb                                           
                                           
Swivel                                           
No Swivel                                           
                                           
Rotary Table                                           
Make : TSM 17.5                                           
Table Opening : 17 ½"                                       
Maximum Load Rating : 150 Ton                                               
                                       
Power Generation                                               
Engines : 3 ea Caterpillar C 32                   
Generators : 3 ea Caterpillar SR 4 B                   
SCR / VFD / DC/DC : VFD Rig                                               

Mud System                                               
Mud Pumps :
2 ea Weatherford Oil Tools MP-10
1,000 hp @ 140 spm                                   
Model : TSM 850                                                       
Pressure Rating : 5,000 psi                                   
Reserve Mud Volume : 0 bbls                                   
Shale Shakers : 2 ea MI Swaco Mongoose                                   
Mud Cleaner : N/A                                   
Desander : Brandt 10" X 2 Cones                               
Desilter : Brandt 5" X 16 Cones                               
Centrifuge : N/A                                   

Well Control               
Annular : 11" 5,000 psi, Doyles Valves,                                    
Single Ram Preventer :
11" 10,000 psi,
Doyles Valves, Type-U                                   
Choke Manifold :
Weatherford oil tools
4 1/16" 10,000 psi                                   
BOP Closing Unit :
T3 Energy Services
6 Station 3,000 psi"                                   

Enhancements 
Forklift : Caterpillar 930 H
Iron Roughneck : NOV ST-80 C   

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.
We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------------
Search words (for official use only) :                   
850HP Victory Trailer Mounted Telescopic Mast Drilling Rig
2009 Built Trailer Mounted Telescopic Mast Rig for Sale
Land Drilling Rig - Trailer Mounted for Sale                                           
Used Land Drilling Rig for Sale in Mexico
Victory Trailer Mounted 105ft Double Rig for Sale   
                                         
---------------------------------------------------------------------------------------------------------------
 
1500hp SCR Land Rig for sale (used)
Worldoils Marketplace
1500hp SCR Land Rig for sale (used)

Worldrigs ID: WR149

1500hp SCR Land Rig - Used and refurbished
National 110 UE Refurbished 1500HP SCR Rig
Refurbished 1500 HPSCR Land rig for sale


Specifications
NationalL 110 UE 1500HP Single Drum Drawworks p/b
(2) 1000 HP Apollo 752 DC Traction

Motors w/10HP Emerson Blower Assembly.

Mast :
SKYTOP 142’ Cantilever 1,000,000# Hook, Skytop Crown
Block w/ (6) Crown Sheave Cluster.

SUB : Skytop 28’W x 26’H x 72’L Swing
Up, 1,000,000#
Casing Load, 600,000# Setback.

Gen Sets :
(3) Kato 1050 KW AC Generator p/b CAT D399 Mounted on
10’W x 30’8”L Covered Skid.

SCR :
IDM 4Bay w/ (2) Eubank V7210733 Air Conditioners
w/9’2”L Porch, Mounted on 10’3”W x 29’2”L Skid.

Mud Pumps :
(2) LS NOI 1300 HP (10P130 Style) Triplex p/b (2)
Apollo 752 DC Traction Motors.

Mud System :
543 Bbl Suction Tank w/ 543
Bbl Shaker Tank and 543 Bbl
Mixing Tank all w/ (2) ODRILL/MCM Linear Motion Shale Shakers,
two 10” Cone Double Life Desander, eight 2” Desliters and
DRECO “Deep Pit” Degasser.

Rotary Table :
Mud King RT275 27
1/2” w/Split Master Bushings, p/b Apollo 752
Traction Motor w/Emerson 10 HP Blower Assembly.

Swivel :
Mud King 450Ton

Block/Hook :
Ideco 525
Ton Block/Hook Combination.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

------------------------------------------------------------------------------
Search words (for official use only) :

1500HP Electric Drilling Rig For Sale
Land Drilling Rig For Sale - 1500hp
1500hp SCR Land Drilling Rig For Sale
Used 1500 HP SCR Drilling Rig

------------------------------------------------------------------------------
Generator for Sale
Worldoils Marketplace
Generator for Sale

Worldrigs ID: WR521

Industrial Generator for Sale
Generator for Sale


Description
1 X Cat 3512 with remote radiator
1040 Kw
1500 RPM, 400V, 50 Hz 320 hours

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your requirements
and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

------------------------------------------------------------------------------------------------
Search words(for official use only) :
Industrial Generator for Sale
Generators for sale
Generator Cat 3512 with Remote Radiator for Sale

--------------------------------------------------------------------------------------------------
 
Caterpillar D9T Used Crawler Bulldozer for Sale
Worldoils Marketplace
Caterpillar D9T Used Crawler Bulldozer for Sale

Worldrigs ID: WR571

Caterpillar D9T Crawler Bulldozer
2005 Mining Equipment - Used Dozers for Sale


Year : 2005
Manufacturer : Caterpillar
Model : D9T
Condition : Used

EROPS, Dual Tilt, SU Blade, Fast Fuel, MS Ripper
Hours : 8,449

Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------------------------------
Search words(for official use only) -
Caterpillar D9T Dozers for Sale
Used Caterpillar D9T Crawler Bulldozer for Sale
2005 Dozers For Mining Mining Equipment Caterpillar Crawler Bulldozer
Used Crawler Bulldozer for Sale in USA
Used Dozers - 2005 Caterpillar D9T - for Sale

------------------------------------------------------------------------------------------------------------------
 
Davey Rotary Table Drilling Rig for Sale
Worldoils Marketplace
Davey Rotary Table Drilling Rig for Sale

Worldrigs ID: WR2752

Davey Rotary Table Drilling Rig for Sale
Drilling Rig - Davey Table Drive


Model : Rotary Table Drill Rig
Manufacturer : Davey
Condition : Used

Description :

Davey Rotary Table Drill Rig
200 PSI Piston Air Compressor
Detroit diesel deck engine
270 gas engine in truck (has a bad valve in it)

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Davey Rotary Table Drive Used Drilling Rig for Sale
Used Drilling Rig for Sale
Used Land Drilling Rig for Sale
Davey Rotary Table Drive Drilling Rig for Sale in USA
Davey Rotary Drilling Rig for Sale in USA

-------------------------------------------------------------------------------------------------------
Mini Bulker for sale
Worldoils Marketplace
Mini Bulker for sale

Worldrigs ID: WR494

Mini Bulker for sale
4500T Mini Bulker for sale

Used Mini Bulker for sale
1984 built Mini Bulker - For Sale
Cheap Small Bulk Carrier For Sale

General Information
Type of vessel : Bulk Carrier
Built : 1984
Classification : VIRES

Main Particulars
LOA : 94.86 m
LBP : 88.00 m
Breadth mounded : 15.80 m
Draft (in Summer) : 5.50 m
Light draft :
Fore : 1.67 m
Aft : 2.07 m

GRT : 2,826
NRT : 1,283
DWT : 4,485
M/E :
6EL40

BHP : 3,300 CV
RPM: 130
Cargo Gear : - Derricks : 3 Units x 15 Mts
Service Speed :
Full Loaded : 12.3 knots
In Ballast : 15.1 knots

Hold’s Dimensions
Hold No.1 : 25.2m x 15.6m x 5.6m
Hold No.2 : 37.8m x 15.6m x 5.6m

Cargo Hatches
Hold No.1 : 14.7m x 8.2m
Hold No.2 : 27.3m x 8.2m

The service capacities of bunker and fresh water :
FW / DO / FO : 390.7 / 37.4 / 331.6 mts

Daily Consumption
Main Engine : 8.0 mts FO/day

Generators
Power : 300 CV - 1.200 RPM x 2 units
Cargo Working : 1.2 Ts DO/day
At Sea : 0.6 Ts DO/day
Idle : 0.7 Ts DO/day

Ventilation System : Natural
Cargo batten fitted : NIL
Type of Hatches’ cover : Pontoon

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------
Search words(for official use only) -  
Mini Bulker for Sale
4500T Mini Bulker for sale
Cheap Small Bulk Carrier For Sale
95M Mini Bulker for sale
1984 built Mini Bulker - For Sale
Cheap Mini Bulker for sale
Bulk Carrier For Sale - 95M
5000Ton dwt Bulk Carrier for sale
Cheap Used Small Bulk Carrier For Sale
4000Ton Dwt Bulk Carrier For Sale

---------------------------------------------------------------------------------------

 
Drilling Rig - NOV 1000 Hp AC/VFD - For Sale
Worldoils Marketplace
Drilling Rig - NOV 1000 Hp AC/VFD - For Sale

Worldrigs ID: WR2751

NOV 1000 HP AC/VFD Drilling Rig for Sale
Drilling Rig - NOV 1000 Hp AC/VFD - For Sale


Description :

General Description :
Make : NOV   
Year Built/Rebuilt : 2008
Estimated Drilling Depth : 12,000 ft
Estimated Rig Move Loads : 17
Estimated Camp Move Loads : 26
Rated HP : 1000

Mast :
Height : 80.00 ft
Static Hook Load Capacity : 500,000lbs
Mast Racking Capacity : N/A

Substructure :
Style : Parallelogram
Height : 20.00 ft
Clear Height : 18.00 ft
Casing Capacity : 500,000lbs
Maximum Setback Load : N/A

Drawworks :
Make : NOV
Model : SSGD-250
Power Rating : 1,500 hp
Input Power :
2 ea Baylor
CM632UU1129A
Brake Type : Disc
Drilling Line Size : 1 1/4”

Top Drive / Power Swivel :
Make : NOV
Model : TDS 10-RR
Capacity : 250 Ton
Torque – Continuous :
Max RPM
20,000 ft-lb
@ 87 RPM

Swivel :
None

Rotary Table :
None   

Power Generation :   
Engines :
3 ea Caterpillar
3512 B
Generators :
3 ea Caterpillar
SR4B
SCR / VFD / DC/DC : VFD rig

Mud System :           
Mud Pumps :                    
2 ea NOV
F-1000       
Power Rating :
1000 hp
@ 140 rpm
Pressure Rating : 5,000 psi   
Active Mud Volume : 1,080  bbls
Reserve Mud Volume : 0 bbls
Shale Shakers :
4 ea Brandt
King Cobra
Mud Cleaner : N/A
Desander :
Brandt 10”
X 3 Cones
Desilter :
Brandt
DSLR-20GG-4CTX
Centrifuge : N/A

Well Control :            
Annular :
13 5/8” 5,000 psi
-1, Hydril, GX
21 ¼”-2000 psi
-1, Shaffer
Double Ram Preventer :
[Cameron] -1
Cameron,
U Double BOP
with Large Bore
Shear Ram
Choke Manifold :
Shaffer 3 1/8”
5,000 psi
BOP Closing Unit :
Shaffer 6 station
3,000 psi

Enhancements :
Forklift : Caterpillar It 62H
Iron Roughneck : NOV ST-80 R
Power Slips : NOV PS-21
Tubular Loading SYS : NOV TLS-6000

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
1000 HP AC/VFD Drilling Rig for Sale
NOV 1000 HP AC/VFD Drilling Rig - 2008 Built for Sale
12,000 ft Drilling Depth Capacity Land Drilling Rig
2008 Built NOV 1000 HP AC/VFD Drilling Rig for Sale
Land Drilling Rig - 1000 hp for Sale

-------------------------------------------------------------------------------------------------------
 
2003 CAT CS-563E Roller for sale
Worldoils Marketplace
2003 CAT CS-563E Roller for sale

Worldrigs ID: WR558

Caterpillar CS-563E Roller for Sale
2003 Used Caterpillar CS-563E Roller

Year : 2003
Manufacturer : Caterpillar
Model : CS-563E
Condition : Used

Description
Hours : 2,338 84" smooth drum, push blade
Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------------------
Search words(for official use only) -
Caterpillar CS-563E Roller for Sale
Mining Equipment Caterpillar Roller
Used Caterpillar CS-563E Roller
 2003 Caterpillar CS-563E Roller for Sale
Caterpillar Roller for Sale in USA

------------------------------------------------------------------------
Towing Tug for Sale
Worldoils Marketplace
Towing Tug for Sale

Worldrigs ID: WR119

Towing Tug  for Sale
1991 Built Tug for sale

Built : 1991 
Class : JG Coastal
LB :11.94x4.95
M/E : MHI SBB-MTC 500ps x 2/300rpm

Inspectable Place: West Japan

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------------------------------------------------------------------------
Search words (for official use only) -
Towing Tugs 1991 Built for Sale
1991 Built Towing Tug for sale
Used TowingTug for Sale
Tug for sale
-------------------------------------------------------------------------------------------------------------------------------------

 
Crawler Crane for Sale
Worldoils Marketplace
Crawler Crane for Sale

Worldrigs ID: WR271

Crawler Crane 600 T for Sale
Crawler Crane with 450 Ton Skyhorse Attachment
1982 Built Crawler Crane for Sale


Principal Particulars
Built year : 1982
Manufacturer : American Hoist & Derrick Company

Classification
ABS consulting, API (2C)

Capacities
Lifting capacity : 122 t @ 12.7 m radius (Boom angle: 80.1 deg.)
Engine : Cummins KTA 1150 c

Dimensions & Load Chart

Dimensions : 
Overall height : 11.563 mtrs
Overall length : 68.5 mtrs.
Boom length : 61 mtrs.
Boom type :
94 H Tubular Chord boom with super sky horse attachment & trailing counterweight

Load line chart (Please refer full load & curve chart) :
Radius (m) / Boom Angle (deg.) / S.W.Load (kgs.)
10.7 m / 82.1 / 135930 kgs
12.2 m / 80.6 / 116470 kgs
15.2 m / 77.7 / 90070 kgs
18.3 m / 74.8 / 71380 kgs
21.3 m / 71.8 / 57860 kgs

Hoists & Other Features
Boom hoist :
Minimum breaking force : 460 kn (46.9 t)
Reeved with : 25.4 mm, 292.60 mtrs.
Max. Boom angle : 82.1 deg.

Auxiliary hoist :
Measured breaking force : 598.72 kn
Wire rope : 1-1/8" (28.5 mm), 2125 fts
Aux. block capacity : 10.5 t
Single line speed :
Nominal rating - 155 fpm, high speed rating: 275 fpm

Other features

Flood lights : 2 sets x 400 watt
Simultaneous operation : Capable of two function with full load & speed.

Main Hoist

Measured breaking force : 741 kn (75.6 t)
Wire rope : 1-1/4" (31.8 mm), 3600 fts.

Single line speed -
Nominal rating : 155 fpm
high speed rating : 275 fpm
Traveling block capacity : 122 t
Load indicator : Electronic load indicator

Rotation :
Rotation direction : 360 deg. swing with load.
Swing speed : 2.15 rpm max.
Transmission type (Crawler crane) : Mechanical with torque convertor

Price & Terms : Please use the email form below to enquire.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.
 
The details mentioned above are believed to be accurate but are not guaranteed.

------------------------------------------------------------------------
Search words(for official use only) :
Crawler Crane with Skyhorse Attachment for Sale
600 Ton Crawler Crane for Sale
600 T Crawler Crane with 450 T Skyhorse Attachment
1982 Built Crawler Crane for Sale
Skyhorse attached Crawler Crane for Sale

--------------------------------------------------------------------------
 
2005 Caterpillar D7R II for Sale
Worldoils Marketplace
2005 Caterpillar D7R II for Sale

Worldrigs ID: WR535

Caterpillar D7R II Mining Equipment for Sale
2005 Used Caterpillar Mining Equipment


Year: 2005
Manufacturer : Caterpillar
Model : D7R II
Location : USA
Condition : Used
Hours : 9,487

Description
Used Caterpillar D7RII LGP tractor
CAB, A/C, straight blade w/tilt, 36" SBG

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------
Search words(for official use only) - 
Caterpillar D7R II Mining Equipment for Sale
Used Caterpillar Mining Equipment
2005 Caterpillar D7R II for Sale in USA

------------------------------------------------------------------------------------
58m Offshore Support Vessel for sale - 2003 built
Worldoils Marketplace
58m Offshore Support Vessel for sale - 2003 built

Worldrigs ID: WR437

Offshore Support Vessel - 58m - for sale - 2003 built
OSV for sale


Specifications :
Type of Vessel : Offshore Support Vessel
Year built : 2002
Registered : 2003
GRT/NRT : 1368/410

Plying Limit : Unrestricted
Classification : American Bureau of Shipping.
Class Notation : ABS + A1 E Offshore Support Vessel *AMS* FiFi Class1
Horse Power : 2 x 2100 BHP
Cruising Speed : 12 Knots

Fuel Consumption :
Cruising Speed 650 Litres/hour
Generator 80 Litres/hour

Main Characteristics :
L.O.A : 57.50 M
Breath Moulded : 13.80 M
Depth Moulded : 5.50 M
Max Draft : 4.50 M
Deck Strength : 7 MT/sq m
Clear Deck space : Approx. 350 sq. m
Deck Cargo : 700 MT
Deadweight : 1369 Tonnes

Capacities :
Fuel Oil : 350 cu.m
Fresh Water : 200 cu.m
Drill Water : 380 cu.m
Liquid Mud : 2 x 125 cu.m
Dry Bulk : 4 x 1650 cu. ft
Foam : 11 cu.m
Detergent : 11 cu. m
Freezer : 6 cu. m
Chiller : 8 cu. m

Auxiliaries :
3 x Caterpillar 3408 C
Genset 315KW/415V/3Ph/50Hz

Pump :
2 x 1200 cbm/hr @ 11 bar cu.m. at head 30m.
Main fire pump : 1 x Allen gwynnes nimbus pump capacity of 50 cu.m at head 100 m.
Emergency fire pump : 1 x Yanmar VDP20E pump capacity 500 ltrs/min at head 30m.

Deck Machinery :
3 x 5 MT electric capstan.
1 x 8 MT @ 12 m/min electric hydraulic type c/w 2 x wildcats plus 2 x warping drums
2 x 1590 kg stockless bower anchors
Total 372 m x 34 mm U2 stud-link chain

Propulsion Machinery :
Main Engines : 2 x Caterpillar 3516 B each of 2100 BHP
Marine Gearbox : 2 x Reintjes WAF 862 L with ratio 5.50 : 1
Propulsion : 2 x Berg controllable pitch in kort nozzles
Bow Thruster : 1 x 325 KW Kawasaki KT-43 B1 (CPP) tunnel units of 5 MT thrust

Navigation & Communication Equipment :
GMDSS : Area 3
Gyro Compass : 1 x Furuno
Radar : 2 x Furuno
Echo sounder : 1 x Furuno
SART : 2 x Joltron
EPIRB : 1 x McMurdo MCM-406A
Navtax Receiver : 1 x Furuno
Autopilot : 1 x Anschuetz
Weather Fax : 1 x Furuno
Speed Log : 1 x Furuno
GPS Plotter : 1 x Furuno

Accommodation :
Fully air conditioning total 50 berth
1 x 2 berth hospital & 1 x office

Fire Fighting Equipment :
Fire Pump : 2 x 1200 cbm/hr @ 11 bar
Fire Monitor : 2 x 1200 cbu/hr @ 12 bar
Fire Extinguish system : Fixed Co2 system for engine room
Fire Hydrants and Extinguishers : As per Classification’s requirement

Life Saving Appliances :
As per SOLAS 74/78, Port of Registry and Classification’s requirements

Other Equipment
Life Rafts : 4 x 25 men
Rescue Boat : 1 x 6 men rigid rescue craft c/w davit & 25 HP outboard engine.
Manoverboard : 2 x Comet.
Deck flood light : 3 x 1000 W deck flood light.
Compressor : 1 x BA recharging compressor

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------------------------------
Search words(for official use only) - 
Offshore Supply Vessel For Sale
Offshore Supply Vessel For Sale in Singapore, Malaysia, Indonesia
OSV for sale in Singapore, Malaysia, Indonesia
Offshore Support Vessel OSV For Sale

---------------------------------------------------------------------------------------------------------------------------------

 

 
Generic LTD 360 Cable Drilling Rig for Sale
Worldoils Marketplace
Generic LTD 360 Cable Drilling Rig for Sale

Worldrigs ID: WR2748

Generic LTD 360 Cable Drilling Rig for Sale
New Generic LTD 360 Cable Drilling Rig for Sale

Model : LTD 360 Cable Drill Rig
Manufacturer : Generic
Condition : New

Description :

LTD 360 Cable Drill Rig
Carries enough mainline cable to drill to a depth of 450 feet
Bore diameters of 4" to 10" inches
Lift capability of 8,000 lbs for casing removal
40 gallons of on-board water storage with a 40 PSI pump
150 amp arc welder when steel casing is used
20 gallons of fuel (enough to drill about 75 feet)
Rated - Penetration rates usually range between 2-½-5 feet per hour
depending on the geology/ground formations with drilling conditions
Mounted on a 2 axles trailer

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Drilling Rig - Generic LTD 360 Cable - For Sale
Generic LTD 360 Cable Land Drilling Rig for Sale
New Generic Drilling Rig for Sale
New Generic LTD 360 Cable Drilling Rig for Sale in USA
New Generic Land Drilling Rig for Sale in USA

-------------------------------------------------------------------------------------------------------
 
Schramm Rotadrill T64HB Drilling Rig for Sale
Worldoils Marketplace
Schramm Rotadrill T64HB Drilling Rig for Sale

Worldrigs ID: WR196

Schramm Rotadrill T64HB Drilling Rig for Sale
Used Schramm Rotadrill T64HB Drilling Rig


Model : Rotadrill T64HB Drill Rig
Manufacturer : Schramm
Year : 1974
Condition : Used

Description :

Schramm Rotadrill T64HB Drill Rig
Rebuilt - Detroit Diesel Deck Engine
No Air Compressor on deck
Tool Carrying Cabinet
Reinforced Mast
Heavy Winch line
3 Outriggers
Hydraulic Pull down & Pull Back
Multiple speed top head motor
Hydraulic Cooler
Autofeed
Mounted on a 1974 International RO Truck
Newer 6 Cylinder Engine
Multi-Speed Transmission

Location : USA

Price & terms : Please enquire using the email form below.       

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Schramm Rotadrill T64HB Drilling Rig - 1974 Built for Sale
Used Drilling Rig - Schramm Rotadrill T64HB
1974 Built Schramm Rotadrill T64HB Drilling Rig for Sale
Schramm Land Drilling Rig for Sale
Schramm Rotadrill T64HB Drilling Rig for Sale in USA

-------------------------------------------------------------------------------------------------------
Newbuilding 100 tons non-AHC Knuckleboom Crane
Worldoils Marketplace
Newbuilding 100 tons non-AHC Knuckleboom Crane

Worldrigs ID: WR347

Newbuilding 100 tons non-AHC Knuckleboom Crane
100 tons non-AHC Knuckleboom Crane for sale

Specifications
- 100 tons 10 meters
- Built 2013 
- Class ABS
- Weight 125 tons
- 2 x 355 Kw electric motors power supply
- Max outreach 27 meters

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

------------------------------------------------------------------------------------------
Search words (for official use only) :
New non-AHC Knuckleboom Crane for sale
Non-AHC Knuckleboom Crane 2013 Built for sale
100 tons non-AHC Knuckleboom Crane for sale  in Far East Asia
Non-AHC Knuckleboom Crane for sale - Newbuilding
New 100T non-AHC Knuckleboom Crane for sale  in Far East Asia

------------------------------------------------------------------------------------------

 
ASD Tug Boat (3600hp)
Worldoils Marketplace
ASD Tug Boat (3600hp)

Worldrigs ID: WR117

3600hp ASD Tug Boat for sale
2008 Built Tug for Sale

Description

Built : Nov 2007
Capacity : 3600hp
Class : Korea
Dimensions :
33.80 x 9.4 x 4.15 m
Location : Korea
GT: 213 tons

M/E : NIIGATA 6L25HX, 1323kW @ 750rpm x 2sets

Propeller: NIIGATA Z-peller x 2sets

Speed : 13.5 knots (design speed) / 13.93 knots (sea trial max.)

Fuel consumption: 201 g/kW. Hr

Nav. & Comm. : Radar, GPS Plotter, AIS, VHF, Magnetic Compass, etc.

Hyd. Winch : Fitted at bow & stern

Fi-Fi system : Fitted

More details available on request.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------
Search words (for official use only) -

ASD Tug Boat for Sale
3600hp Tug Boat for Sale
2008 Built Tug Boat for Sale
Tugboat for Sale - 3600hp
ASD Tugs for Sale

--------------------------------------------------------------------

 
200Ton Floating Crane for Sale
Worldoils Marketplace
200Ton Floating Crane for Sale

Worldrigs ID: WR114

Floating Cranes for Sale
Used Floating Cranes for Sale
1996 built Floating Cranes for Sale


G.T: 732 ton
LXBXD: 48.98 X 19.00 X 3.8m
Built: Mar 1996
Type of crane: Sumitomo SF1700HD
Engine: Denyo 350ps x 2 stes6. Deck load capacity:  19.5x19.0m
Lifting Capacity: 200 ton
Boom Length: 42M
Hook: 200ton, 150ton10. Mooring Anchor: 4sets
Bow thrusters fitted
 
Inspection and delivery: Korea

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------
Search words (for official use only) -
Floating Cranes - 200MT - For Sale
200MT Floating Cranes for Sale
Used Floating Cranes 1996 built for Sale
1996 built Used Floating Cranes for Sale
Used Floating Cranes - 1996 Built

--------------------------------------------------------------------------------

Coal/Ore/Sand Loading barge for Sale
Worldoils Marketplace
Coal/Ore/Sand Loading barge for Sale

Worldrigs ID: WR116

Coal/Ore/Sand Loading barge for sale

Description
Built: 2008
Loading Capacity: 2000ton/HR
Available: COAL / ORE / SAND Loading at offshore from barge to huge vessel.

Inspectable Place : West Japan

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

--------------------------------------------------------------------------------------------------------
Search words (for official use only) -
Coal/Ore/Sand Loading Barge 2008 Built for sale
2008 Built
Coal Loading Barge for sale
2000ton/hr Loading Capacity Barge

2008 Built
 Sand Loading Barge for sale
-------------------------------------------------------------------------------------------------------

 
3000Ton Revolving Floating Crane
Worldoils Marketplace
3000Ton Revolving Floating Crane

Worldrigs ID: WR76

3300Ton Revolving Floating Crane Barge for Sale
Floating Crane Barge for Sale

Description :

Max Fixed lifting capacity : 3,300Tons
Max revolving lifting capacity : 2,600 Tons
Built in 2011
Length overall : 156m
Breadth(moulded) : 45m
Depth (moulded) : 13.5m

Operating draft : 7-12m
Full load displacement : 59,000MT
Ballast capacity : 35,000MT
Fuel oil capacity : 4,050MT
Fresh water : 2,800MT

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------------
Search words (for official use only) :
3000Ton crane barge for sale
Floating Crane for Sale in Asia
3300Ton Revolving Floating Crane in Asia
Floating Crane - 3000 Ton - For Sale
3300Ton Floating Crane for sale

----------------------------------------------------------------------------------------

 
Newbuilding Oil Barge for Sale
Worldoils Marketplace
Newbuilding Oil Barge for Sale

Worldrigs ID: WR735

Oil Barge for Sale
3277dwt Oil Barge for Sale
Newbuilding Oil Barge for Sale

Description :
This double hull and double bottom oil barge is designed for
carrying  base oil and finished oil, which flashpoint is below 60°C.

Particulars :
Length overall : 230 ft (70.104 m)
Length bp : 67.30 m
Breadth moulded : 60 ft (18.290 m)
Depth moulded : 18 ft (5.490 m)

Draft moulded : 3.63 m
Gross tonnage : 1834 t
Net tonnage : 807 t
Lightship weight : 970.19 mt

Displacement : 4247.55 mt at summer draft
Tank capacity : +/- 3277.50 mt
Hull material : steel

Tank age :
Cargo tank : +/- 3750 cub.mt
Fuel oil : +/- 8 cub.mt
Dirty oil tank : +/- 16 cub.mt
Fresh water : +/- 21 cub.mt
Sewage : +/- 16 cub.mt

Machinery, equipment & piping :
Cargo fuel pump :
2 x 2GC/BL350 Q=350 cub.mt/hr, P=0.8 mpa, 1500 rpm

Diesel engine :
2 x for starting cargo fuel pump, 6135 AZcaf, w=190 kW/220hp, n=1500 rpm

Reduction gear box : 2 x 135 r = 1:1
Generator : 2 x 24 kW daewoo, 415v / 50 hz / 3ph
General pump : 1 x 22 cub.mt/hr x 26 m/h

Fire pump : 1 x 22 cub.mt/hr x 26 m/h
Oily dirty water seperator : 0.5 cub.mt/hr
Hall's anchour : 1 x 900kg, wire cable Ø 28 x 200m

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

 ---------------------------------------------------------------------------------------------------
Search words (for official use only) :
Oil Barge for Sale
Double Hull Barge for Sale - Length 230ft
New 230FT Barge For Sale in Asia
Newbuilding Oil Barge For Sale - 3277DWT
3277 dwt New Oil Barge for Sale in China
18ft depth new barge for Sale

----------------------------------------------------------------------------------------------------

Newbuilding 1658BHP 26M Towing Tug
Worldoils Marketplace
Newbuilding 1658BHP 26M Towing Tug

Worldrigs ID: WR348

New Tug For Sale
Newbuilding 1658BHP 26M Towing Tug
1600BHP Towing Tug For Sale

Principal Particulars
Class : GL
Length overall : 26.00m
Length B.P. : 23.98m
Breadth moulded : 8.00m
Depth moulded : 3.65m
Draft moulded : 3.00m
Trial speed : approx 10 knots
Designed bollard pull : 22 tonnes (approx)

Machinery
Main Engine : Yanmar 6AYM-ETE, 2 x 829BHP / 1900 rpm
Gear box : Yanmar YXH 240 L, Ratio: 5.91:1
Propeller : 2 x solid fixed pitch propellers
Main generator : 2 x 28KVA Cummins / Yanmar

Tankage
Fuel oil : 153M³
Fresh water : 46M³
Ballast : 29M³

Deck Machinery
Anchor : 2 x stockless bower anchors (420kg)
Chain Cable : Nine (9) lengths of Grade U2 chains
Anchor Windlass : 17.5mm anchor windlass
Towing Hook : 1 x 25 tons

Navigation & Communication Equipment
Echo Sounder : 1
GPS : 1
Radar : 1
4” Spare Magnetic Compass : 1
SSB & VHF : 1
EPIRB : 1
Battery Clock : 1
Barometer : 1
Searchlight : 1
Floodlight : 3
Clear View Screen : 1
High Steering Wooden Chair : 1

Auxiliary Equipment
Bilge & Ballast pump : Power: 1 x 2.2HP / 1.65kw / 415v50Hz
Q (1/min): 50 – 170
H (m): 42 -22
GS & Fire pump : Power: 1 x 2.2HP / 1.65kw / 415v50Hz
Q (1/min): 50 – 170
H (m): 42 -22
Fresh water pressure set : Power: ½ HP
Suction head (m): 8
Max. Quantity (1/min): 48
Sea water pressure set : Power: ½ HP
Suction head (m): 8
Max. Quantity (1/min): 48

Fire Fighting System
2’ Firehouse + Hydrants : 3 sets
Fire Extinguisher : 9 nos
Fireman Axe : 1
Scoop & Sand Box : 1
Fire Bucket : 3
Anchor Ball : 3

Life Saving Equipment
Life Raft : 2 units (10 men)
Life Buoy : 8 pcs
Life Jackets : 14 pcs
Parachute Distress Rocket : 12 pcs
Fireman Outfit : 1 set

Accommodation
Total Complement : 10 Crews

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


Land Drilling Rigs

----------------------------------------------------------------------------
Search words ( For official use only) :
Towing Tug for sale
Towing Tug for sale in Singapore
Newbuilding Towing Tug for sale in Asia
1600bhp Towing Tug for Sale
Tug For USA
Tug For Columbia
1658 bhp towing Tug
Tug For South America
Tug For Mexico
New Towing Tug For Sale in Singapore
Tug For Trinidad

------------------------------------------------------------------------
 
5000BHP 60TBP ASD Tug - New - For Sale
Worldoils Marketplace
5000BHP 60TBP ASD Tug - New - For Sale

Worldrigs ID: WR627

ASD Tug for sale
5000bhp ASD Tug for Sale
New ASD Tug For Sale


Principal particulars
Length O.A. : 30.50 m
Length W.L. : 29.50 m
Beam mld. : 9.60 m
Depth mld. : 4.370 m
Draft designed : 3.50 m
Draft max. : 4.00 m
Complement : 10 men
F.O. : 140 cub.mt approx.
F.W. : 30 cub.mt approx.
Lub. oil : 4 cub.mt approx.
Despersant : 3 cub.mt approx.
Foam : 6 cub.mt approx.

Designed specs
Gross tonnage : <400
Speed : 12.5 knots
Bollard pull : 60t

Dimension
Length overall : 30.50 m
Length dwl : 29.50 m
Breadth moulded : 9.6 m
Depth moulded : 4.37 m
Draft (designed) : 3.80 m
Draft (max) : 4.00 m

Machinery
Cat 3516B 2 x 1864kW / 1600 rpm
Rotation ccw. 2 x 2500 bhp = total 5000 bhp
Propulsion sys. : 2 x azimuth thruster (schottel SRP1515FP)
Auxiliary engine :
2 x 112kW / 415v / 50hz / 3P, capable run in parallel
Emergency power : batteries
Sewage system : 10 men
Oily water separator : 0.5 cub.mt / hr @ 2kg/cm2

Deck machinery
Fwd towing winch :
brake holding 120 tonnes at 1st layer, static
Windlass : 3t @ 10m/min
Towing hook : 65t swl
External fi-fi : half fifi-1
Fire monitors : 600 cub.mt / hr @ 120m head capacity

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
Price & terms : Please enquire using the email form below.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) -
ASD Tug for sale
ASD Tug For Sale in Middle East, India
New 60TBP ASD Tug For Sale
New 5000bhp ASD Tug For Sale
5000BHP 60TBP ASD Tug For sale
ASD Tug For Sale in Singapore, Malaysia, Indonesia

-------------------------------------------------------------------------------------------------------

 
1340 HP Ocean Going Tug
Worldoils Marketplace
1340 HP Ocean Going Tug

Worldrigs ID: WR643

Ocean Going Tug for sale
1340 HP Ocean Going Tug - For Sale
1996 Built Ocean Going Tug For Sale

Year of built : Nov 1996

Principal dimensions :
Length overall : 25.00 m
Length B.P. : 23.50 m
Breadth moulded : 7.50 m
Depth moulded : 3.20 m
Draft design : 2.50 m
GRT/NRT : 174/52

Capacity :
F.W. Capacity : 30 tonnes
F.O. Capacity : 115 tonnes
F.O. Consumption : 4.7 T.P.D.
Cruising F.O. Consumption : 3.8 T.P.D.
Endurance : 28 days

Nozzle : 2 kort nozzles

Navigational equipment :
Furuno FS-1500
Furuno FM-2510/DC24V/25W
Furuno 1941
Furuno GP 50
Furuno FCV-665
PA system

Accommodation :
10 persons (air conditioned)

Main propulsion :
Twin caterpillar D.3412 TA BTA
2 x 671 bhp

Gear box :
Twin disc 520-2

Bollard pull : 15 tonnes

Speed : 10 knots

Auxiliaries :
Generators
2 x cummins 4 BT 39 (m)
GCI 415V/50 HZ/40 kW

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed. 

---------------------------------------------------------------------------------------------------------
Search words (for official use only) - 
Ocean Going Tug For Sale
1340 HP Ocean Going Tug - For Sale

Tugs For Sale in Middle East, India
Ocean Going Tug For Sale in Singapore, Malaysia, Indonesia
Used 1340 HP Ocean Going Tugs for Sale
1996 Built Ocean Going Tug For Sale

-------------------------------------------------------------------------------------------------------
Generic Larson Reverse Rotary Drilling Rig for Sale
Worldoils Marketplace
Generic Larson Reverse Rotary Drilling Rig for Sale

Worldrigs ID: WR1036

Generic Larson Reverse Rotary Drilling Rig for Sale
Drilling Rig - Generic Larson Reverse Rotary - Air Assited


Model : Larson Reverse Rotary Drill Rig - Air Assited
Manufacturer : Generic
Condition : Used

Description :

1982 Larson Air Assisted Reverse Rotary Drill Rig with Substructure
New derrick 120,000 lbs rated
rebult hydraulic system in 2010
Caterpillar 6 cylinder deck engine (spare rebuilt engine in a crate)
double draw works
1" main line, 1" laydown line, 1/2" tail out line

Included as a Package:
Doghouse - Wired, lighted, AC, tool room, Geolograph
40ft 5th wheel, tandem wheel, drill pipe trailer
Substructure 15ft X 12ft 8ft Custom fabricated with guard rails
1,500  ft of 6-5/8" ID IF modified
90ft of 14" drill collars
2010 Atlas Copco 950 cfm / 350 psi SRVS1000 CD6 Air Compressor
1,000 gallon fuel storage tank with transfer pump
King swivel
Pilot Hole bits
Reaming Hole oppener bits
Casing Collars

Optional Equipment that Cost Extra:
Complete testing pump equipment, 6 pumps, 800 ft of 10x3.5x2.437" column
tube she, gear head, discharge head
12 Cylinder Caterpillar test engine

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Generic Drilling Rig for Sale
Generic Larson Reverse Rotary - Air Assited Drilling Rig
Generic Used Larson Reverse Rotary - Air Assited Drilling Rig for Sale
Used Generic Air Assited Drilling Rig for Sale in USA
Generic Air Assited Drilling Rig for Sale in USA

-------------------------------------------------------------------------------------------------------
 
Geoprobe 8150LS Crawler Drilling Rig for Sale
Worldoils Marketplace
Geoprobe 8150LS Crawler Drilling Rig for Sale

Worldrigs ID: WR2745

Geoprobe 8150LS Crawler Drilling Rig for Sale
Geoprobe 8150LS Crawler Drilling Rig - 2017 Built for Sale


Model : 8150LS Crawler Drill Rig
Manufacturer : Geoprobe
Year : 2017
Condition : Used

Description :

Geoprobe 8150LS Crawler Drill Rig
Geoprobe 50DT Track Base Platform
Geoprobe GV5 Sonic Head Long Stroke
Geoprobe Designed Rod Handling
System Head Feed Stroke: 157"
50K Dynamic Force
Remote Diagnostics
Adjustable Swing-arm Control Panel
Automatic Drop Hammer 140 lb
Winch Kit: 2,500 lb

Safety Cage
Triplex High Pressure Water Pump
Air Compressor Kit, C6.6 with BA-922
Drop Rack System with Rod Rack
Drill Mast Side-Shift
Head Centerline Side-Shift
Fits in 40 ft Shipping Container for Exporting
10-ft Tooling Compatible
Rock Coring Compatible
14" in Double Wrench Breakout
Dual Winch System
Front and Rear Outriggers (Four Point Stabilization)

Sonic tooling inventory with rig: (extra cost or included as a package)
Two tooling indexing racks with rollers
230 ft of 4 tooling
230 ft of 6” tooling
100 ft of 8” tooling
One Actuator core for rod handler
One SDT-60 Weighted Wire Line Core Barrel
Several bits and adapters
(Cost Extra or included as a package for all listed together)
2010 Freightliner model Cascadia Truck with Diesel Engine (492,560 miles)
Trailer for the hauling the drill, pipe, and tooling (as is in the pictures)
1210 Hours on Engine, 210 Hours on Sonic Head at time of listing.
(Price Reduced as of 7/2020 to sell fast)

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
2017 Built Geoprobe 8150LS Crawler Drilling Rig for Sale
Drilling Rig - Geoprobe 8150LS - For Sale
Geoprobe 8150LS Crawler Used Drilling Rig for Sale
Used Geoprobe 8150LS Crawler Drilling Rig for Sale in USA
Geoprobe Crawler Drilling Rig for Sale in USA

-------------------------------------------------------------------------------------------------------
 
4400BHP DP1 Support Supply Vessel for Sale
Worldoils Marketplace
4400BHP DP1 Support Supply Vessel for Sale

Worldrigs ID: WR124

DP1 Subsea Support Vessel
4400BHP DP1 Support Supply Vessel for Sale


Specifications

General
Class : ABS
Notation :
ABS Class+A1 (E) “Offshore Supply Vessel, Fire
Fighting Vessel Class 1” + AMS + DPS-1

Principal Particulars
Length Overall : 59.25m
Length Waterline : 46.00m
Breadth Moulded : 15.00m
Depth Moulded : 6.10m
Draft (max) : 4.60m
GRT/NRT : 1600/ TBA (approx)

Performance
Maximum Speed : 12.5 Knots
Economical Speed : 10 Knots
Type of Fuel : Marine Gas Oil
Bollard Pull : Nil

Fuel Consumption :
19 cbm /24 hours @ max speed
12 cbm /24 hours @ econ speed

Cargo Capacities
Deadweight : 1450 Ton (approx)
Deck Cargo : 500Ton (approx)
Deck Strength : 7 Ton/sqm uniform loading
Clear Deck Area : 350 sqm (approx)

Fuel Oil : 1000 sqm (approx)
Fresh Water : 250 sqm (approx)
Ballast/Drill Water : TBA sqm (approx)
Liquid Mud : Nil

Cement TankCement Tank : Nil
Freezer / Chiller : 10 cbm / 10 cbm
Foam / Detergent : 15 cbm / 15 cbm
Rig Chain Locker : Nil

Pumps
Fuel Oil : 1 x 150 cbm/hr @ 60 m head
Fresh Water : 1 x 100 cbm/hr @ 75 m head
SWB/Drill Water : Nil
Liquid Mud : Nil
Bilge/Ballast : 2 x 75 cbm/hr @ 40 m head
GS/Fire Pump : 1 x 75 cbm/hr @ 40 m head
Bulk Cement Compressor : Nil

Propulsion System
Main Engines : 2 x 2200BHP (1600kw) @ 1600rpm, Wartsila 8L20
Main Generator : 3 x 350kw, 415V/3Ph/50Hz, CAT
Emergency Generator : 1 x 80kw, Cummins
Bow Thruster : 1 x 5 Ton Thruster, abt 350kw, Kawasaki KT-43B1
Steering Gear : Nil
Z-Peller : 2 x Wartsila,Lips CS 225-S/WN-K
DP1 : MT or Kongsberg

Deck Equipment
Anchor Windlass 1 x electro hydraulic, 8 tons @12 m/min for 40mm
Drum Nil
Mooring lines 4 x 160M @ 157kn breaking strength
Tow line 1 x 190M long towline of min. 406KN breaking
Bow Anchors 2 x 1575 kg HHP anchor
Chains 440 m (L) x 40 mm (Dia), Grade U2
Capstan 2 x 5 mt @ 15 m/min electro hydraulic, Marine Equipment

Mooring winch :
4 x 60 mt @ 1000M, 32mm dia. wire
4 x 3 tonnes high holding type anchors

Deck Crane : 10 tons x 20m

Accommodation
4 x 1 berth cabin = 4
3 x 2 berth cabin = 6
10 x 4 berth cabin = 40
Total : 50

Hospital
Hospital 1 x 1 berth cabin = 1
All cabins fully air-conditioned & c/w attached washroom.

Radio & Navigation Equipment
GMDSS Area A3, consist of :
SSB 1 x JRC/Furuno
Inmarsat C 2 x JRC/Furuno
VHF Radio 2 x JRC/Furuno
Navtex ReceiverNavtex Receiver 1 x JRC/Furuno1 x JRC/Furuno

SART 2 x JRC/Furuno
EPIRB 1 x JRC/Furuno
Portable VHF Radios 3 x JRC/Furuno
Radar 2 x JRC/Furuno
Echo Sounder 1 x JRC/Furuno
DGPS 1 x JRC/Furuno
Gyrocompass 1 x JRC/Furuno/Anschutz/Tokimec

Autopilot 1 x JRC/Furuno/Anschutz/Tokimec
Magnetic Compass 1 x JRC/Furuno
Weather Fax 1 x JRC/Furuno
Speed Log 1 x JRC/Furuno
Wind Indicator 1 x JRC/Furuno
AIS 1 x JRC/Furuno

Joystick Kongsberg/MT
Vessel also fitted with PA Talkback System & Self-powered
Telephone.

Fire-Fighting Equipment and Anti-Pollution Equipment
External :
FiFi System Class 1 with water curtain all round
Fire Pump 2 x 1200 cbm/hr @ 11 bar
driven by front PTO ME
Monitors 2 x fire monitors
water/foam 1 x 300 - 1200 cbm/hr, FFS
water 1 x 1200 cbm/hr, FFS
Oil Dispersant System 2 x Cluster nozzles

Internal :
Emergency Fire Pump 1 x 25 m3/hr x 45m head
BA Recharing Comp 1 x 75 ltr/min @ 200 bar
CO2 system in engine room
Fire Detection & Alarm in living spaces and engine room.

Miscellaneous
Liferafts 6 x 20, SOLAS standard,ChinaMake
Rescue boat 1 x 6 men, c/w outboard engine, China Make ina Make
Oily Water Separator 1 x 1.0 m3/hr c/w 15ppm alarm
Water Maker 1 x 5 T/day, Sweden
Sewage Treatment Plant 1 x 60 men/day,China Make
Air cond and freezer Germany

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------
Search words (for official use only) -
4400bhp New DP1 Support Supply Vessel
DP1 Subsea Support Vessel 4400bhp for sale
New 4400BHP DP1 Support Supply Vessel for Sale
Brand New Subsea Support Vessel
Over 59m Subsea Support Vessel for sale

-----------------------------------------------------------------------------------

Driltech D25KW Drilling Rig for Sale
Worldoils Marketplace
Driltech D25KW Drilling Rig for Sale

Worldrigs ID: WR530

Driltech D25KW Drilling Rig for Sale
1997 Built Driltech Used Drill Rig for Sale


Model : D25KW Drill Rig
Manufacturer : Driltech
Year : 1997
Condition : Used

Description :

1997 Driltech D25KW Drill Rig
Sullair 900X350 Air Compressor
W/A CAT C15 Deck Engine (Engine has less than 1000 hours since rebuild)
Mounted a Ford LNT 8000 W/A 300 HP Cummins Engine
8LL Transmission
18,000 Front Axle, 46,000 Rear Axle
Pipe Rack Holds 15 PCS.
Rotary Head 89 RPM, 72,600 LBS. Torque
JIB Boom, Hydraulic extend W/180 degree Hydraulic Swing
Winch, Hydraulic 7,500 LB. Capacity
Drill Table, 20" Opening with Hydraulic Adjustment
Breakout Wrench, 48" jaw type
Remote Control Station
Water Injection, 20 GPM with foam pump
Airline Lubricator
Operators Platform
Fine Feed & Torque Controls
Night Lights
Slip Bushings
With 420 feet OF 4-1/2" X 20 FT. Drill Pipe & Tooling.
It has Good Tires and Runs Strong.

Location : USA

Price & terms : Please enquire using the email form below.       

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Driltech D25KW Drilling Rig - 1997 Built for Sale
Driltech D25KW Used Drilling Rig for Sale
Driltech Land Drilling Rig for Sale
Drilling Rig - Driltech D25KW for Sale
Driltech D25KW Drilling Rig for Sale in USA

-------------------------------------------------------------------------------------------------------
 
3000HP Electric Deep Drilling Rig - For Sale
Worldoils Marketplace
3000HP Electric Deep Drilling Rig - For Sale

Worldrigs ID: WR2891

3000HP Electric Deep Drilling Rig - For Sale
Deep Land Drilling Rig for Sale

Description :

Rig Specifications
A. General Rig Specification :
The rig will be suitable for operation in the temperature range 0°C to 55°C
 
General Description :
- Drilling depth: 9000m(4-1/2"DP)
- Max hook load of mast and substructure: 6750KN
- Travelling system: 7×8
- Diameter of drilling line: 1-5/8"(42mm)
- Top drive: DQ90BS-JH
- 37 1/2" electric motor driven Rotary table
- Rated input power of drawworks: 3000HP
- Mud pump unit: 1600HPX3
- Mast type and effective height: K type, 49.5m
- Substructure type and clear height: Slingshot,42ft/12.8m
- Electric drive type: AC-VFD-AC
- Rig power system: 7xCAT3512B, 7X1101bKW 600V/60Hz & 1xCAT C18, 545KW/60Hz
- Voltage/Frequency/Phase: 600V/480V/110V 60HZ/3phase
- All electric equipments are in accordance with API RP505 standard.
- Main structure painting standard
- Explosion standard: ATEX/IECEX/UL/CNEX
 
A.1.1. Mast and Associated Equipment : Qty - 1 set
- To be API monogrammed, possessing valid API-4F certificate. Confirmed to API 4F
4th edition,PSL1,SSL: E2 U2.
- Nominal drilling depth: 6000-9000m(4-1/2"DP); 5000-8000m(5"DP);4000-7000m(5-1/2"DP)
- Max. Static hook load: 1,500,000 lbs/750ton/6750KN(7×8 strand,14 lines);
- Effective height:162.5ft/49.5 m as per API approved Mast to safely accommodate top drive 
and travelling system;
- Height of monkey board(from drill floor):80ft 4-1/2",83ft 8",86ft 11-1/4"(24.5m,25.5m,26.5m);
- Top span(front x side): 8ft 6-3/4"×7ft10-1/2"(2.6m×2.4m);Bottom span(front): 32ft 9-3/4"(10m) .
- Steel material. Welding Procedure as per AWS.
 
The allowed wind speed of mast :
- Operating mode(Full stands and full hook load):16.5m/s (32knots)
- Working condition(Full hook load and full rotary beam load ):16.5m/s (32knots)
- Erection condition:16.5m/s (32knots)
- Unexpectable condition (Full rotary beam load and full stands): 30.7m/s  (60knots)
- Expectable condition(Full rotary beam load ):38.6m/s (75knots)
- Equipped with two sets of buffer hydraulic cylinders, which can be used for raising and
lowering the mast.
- 2 mast ladders -without cage (one each to monkey board & crown block)
- With hange line for hanging travelling system(include Top drive) when drilling line cutting;
including wirelines,shackles.
- With levelling shims and two (2) 100 tons each hydraulic jacks with hand pumps.
- Four(4) 2t Derrick Hoist Blocks with secondary retention are used.
- Two(2) 4t Derrick Hoist Blocks with secondary retention are used. 
- With Mast Raising Line Ø80mm( 3 1/8")
- With Mast Support Frame:Using for supporting mast during Rig-Up & Down
- 1 ea. SALA Self-retracting fall arresting devices & Derrick safety harness with frontal 
pad for the derrick man to be installed above the derrick board for the derrickman(15m), 
- 1 ea.SALA Self-retracting fall arresting devices & Derrick safety harness with frontal pad
for the derrick man to be installed above exit point from the mast ladder to the derrick board
platform at the mast ladder side(15m).
 
A.1.2. Monkey Board - Qty : 1 set
Monkey board to support : 
- 286 stands of 5-1/2" Drill pipes(8000m);
- 6 stands of 8" D/Collars;
- 3 stands of 10" D/Collars;
- 2 stands of 14" D/Collars. 
- With adjustable centre diving board and hinged extension. Adjustable 80ft 4-1/2",83ft 8",86ft11-1/4"
(24.5m,25.5m,26.5m) above drill floor level complete with safety chains on all fingers.With
Mounting bracket to accommodate pullback air winch. Access platform with handrails and 
escape line (with easy and safe access) . Logo on the monkey board can be painted as 
clients requirement.Without Wind Wall.
 
A.1.3. Tubing "Belly" Board - Qty : 1 set
- Tubing "belly" board.
- Features: Completed with walkway and handrails in the outside of tubing belly board.
 
A.1.4. Casing Stabbing Board - Qty : 1 set
- Pneumatic Casing stabbing board – adjustable from 20ft - 50ft above rig floor, having two braking
devices withone being failsafe. Both locking devices are independent of each other.
- Operations to be independent of casing tongs.
- The casing stabbing board is equipped with upper and lower limit switches.
- Guardrails and fall protection system will be installed(SALA Fall arrest 3400900).
Full body harness with lanyard as per BS or ANSI or equivalent International Standards
( 1piece as SALA recommend)
- Adequate anchor points anchor point to be available for connecting the lanyard and
Self-retracting fall arresting devices with full body harness. Anchor points will be positioned
independently from the movable stabbing board assembly.
- The stabbing board platform to be installed with one certified safety line,the safety line
will connect stabbging board with one padeye on Mast.
- Air winch on Casing stabbing board:
- Remote pendent control
- Control cord with emergency stop.
 
A.1.5. Mast Emergency Escape system - Qty : 1 set
- Mast Emergency Escape system with accessories and user manuals
- Mittelmann Mast emergency descent device RG 10D(EN standard)
- The models will be suitable as per the mast / monkey board height and as
per manufacturer recommendations.
- The PPE & accessories used in the system for emergency escape willl be
as per the manufacturer requirements, included Satey Harness and anchor block
 
A.1.6. Derrick Climbers Assist Lines - Qty : 3 set
- Derrick climbers assist lines(one each to monkey board & crown block) complete
with lines,certified snatch block. climber assistor, 3 sets.
 
A.1.7. Crown Block - Qty : 1 set
- Crown block rated for 1,500,000 lbs/750ton/6750KN static hook load capacity with :
- Seven (7) sheaves cluster of 1524mm(60 inch) sheaves;
- One(1)fast line sheaves  1524mm(60 inch);
- All grooved for φ42mm (1 5/8") drilling line;
- Confirming to API Spec.8C 5th Edition and API Spec 4F latest Edition, PSL1,  SSL: E2 U2;
- To be API monogrammed, Possessing valid API-4F and 8C certificate.
- Two (2) 4t Hoist Blocks with secondary retention are used.
- Two(2) 12t Hoist Blocks with secondary retention are used.
- One (1) 25t Hoist Blocks with secondary retention are used.
 
A.2. Subbase and Associated Equipment - Qty : 1 set
A.2.1 Subbase :
- Rated for 1,500,000 lbs/750ton/6750KN casing load capacity simultaneous with
800,000 lb./400ton/3600KN setback capacity. 
  - Rig floor dimensions: 13m×14.8m/42.6ft×48.5ft
  - To be API monogrammed, possessing valid API- 4F certificate.
- Confirmed to API 4F 4th edition, PSL1, SSL: E2 U2.
- Steel material
- Welding Procedure as per AWS.
- Drill floor height(from Ground to drill floor): 46.92ft/14.3m;
- Drill floor clear height(from bottom of rotary table beam to Ground):  42ft/12.8m;
- Sub base with clear height under BOP trolley beams:36ft/10.97m (from bottom of 
BOP trolley  beams to Ground).
- Substructure type: Sling shot.
- Two(2) Stairways for access from rig floor to ground level and One(1) Stairways
for access from rig floor to mud tanks.
- One(1) 2ft wide safety slide for emergency escape slide from rig floor to ground level.
- Equipped with two sets of buffer hydraulic cylinders, which can be used for
raising and lowering the substructure.
- One stand pipe vertical skid.
- One hanger frame for 2*1.5m³ air receiver.
- Structure to be installed at lower floor position. After mast raised, substructure
to be raised up with floor equipments by two(2) hydraulic winch which are included.
- With Substructure Raising Line Ø38mm( 1 1/2")L=325m
- With Rig floor dog house(one air conditioner included),1 set;
- With tool house,1 set.
- With 2 ea. SALA Self-retracting fall arresting devices with Derrick safety harness
with frontal pad to be installed under the Fix anchor point around BOP beams (15m).
- With 1 set Antiskid floor mats for the rig floor, only for main working area of rig floor.
(The area between the setback and drawworks , inside left and right mast leg.)
- With 1 set Drilling Bell nipples for 29-1/2" diverter, 18-3/4" Bops.& 12" Flow line.
 
A.2.2. A Secondary BOP Retention System - Qty : 1 set
A secondary BOP retention system below the sub-structure with safe rated
pad eyes along with accessories including but not limited to wire rope slings,
shackles, pins, chains, hooks etc for the holding the heaviest BOP stack
shall be in place to prevent BOP falls in case of failure of primary retention
system (BOP hoist) system during casing slip setting, casing cutting and
other activities.
 
A.2.3. Drip Pan System under Rig Floor - Qty : 1 set
- Drip pan system under Rig Floor.
- Rig floor to be sealed with all drainage from the rig floor contained in a drain
system for discharge to location.
 
A.2.4. The Safe Working Load (SWL)
The Safe Working Load (SWL) will be prominently marked for all Pad eyes on
Mast and Substructure
 
A.2.5. Mouse Holes - Qty : 1 ea
Mouse holes, 12" OD and 16" OD.
 
A.2.6. Mechanical Conventional Catwalk - Qty : 1 set
- Mechanical Conventional catwalk size:18000mm(L) ×1500mm(W) ×1070mm(H), two sections.
- Catwalk fitted with 2 each cementing lines & kill lines of 2"IDx 15 M, having slide/ sling gate at Rig .
- The kill line is only fixed under catwalk, and wont lay to ramp and drill floor.
- Cementing Lines and Kill Lines on Catwalk are made by Chinese vendor,  as per API 16C;
- Valves on cementing lines and kill lines are from western brand vendor.
 
A.2.7. Pipe Rack - Qty : 10 pcs
- Triangle pipe rack, length 9000mm, height 1070mm, end with retaining pin
 
A.2.8. BOP Lifting Hoist System - Qty : 1 set
- BOP lifting hoist system, 150-ton capacity 
- Trolley beams mounted on the substructure under the drilling floor with travel of the BOP
hoists is to cover the entire length of sub base.
 - Max. hoisting capacity:2×75ton
 - Max. hoisting height:4.8m
 - Max. hoisting speed:0.6m/min
 - Max. lowering speed:1.0m/min
 - Max. horizontally travelling speed:6m/min
 - Max. working pressure of hydraulic system:21Mpa
 - Max. flow rate of hydraulic system:120L/min
 - Wireline diameter:44mm
- With One (1) Hydraulic Power unit (Electrical Motor Drive) is used for substructure up/down & BOP
lifting hoist system
 
A.2.9. Hydraulic Power Unit for Hydraulic Tools - Qty : 1 set
- Hydraulic power unit For hydraulic tools
- Hydraulic unit complete with two (2) hydraulic pumps each driven by electric motors mounted
at derrick floor, for use with rig-floor auxiliary equipment.
- Max.pressure: 3000psi/21MPa 
- Rated pressure: 2320psi/16MPa 
- Rated  output flow: 120L/min
- Effective volume: 1000L
- Main power input: 55kW x 2
 
A.2.10. Drilling Line Spool for drill line complete with air/hydraulic motor.  - Qty : 1 set
- Model:DSJ45Q
- Output drum speed : 0~13r/min
- Output torque:14000N.m
- Max.working air pressure: 0.8Mpa
- Max.load: 20000kg
- Suit wireline:42mm( 1-5/8")×7500ft
 
A.3. Draw Works
A 3.1. AC  Electric Draw Works 
AC Electric Draw works  - Qty : 1 set
 - Rated for 2200KW(3000HP)input power;
 - Nominal depth range up to 30,000 ft;
 - Powered by two(2) 5GEB28, 1118kw/1500HP, 600V,Make: GE. With IECEX/ATEX
 - Disk Brakes  (PSK Model:PS295/6750D) on main drum as fail-safe emergency / parking brake.
- Standard Disc Brake System with air-cooled Discs, 6 x hydraulic service calipers,
4 x Spring-set safety calipers, independent hydraulic power station , and Control Console. 
- Working brake torque:295kN.m,Parking release brake: 190kN.m,Emergency brake: 485kN.m
 - Max. fastline pulling capacity:141,000lbs/640KN
 - Pulling capacity - 1,500,000/6750 Static hook load@ 14 lines.
- Drum size:Φ915mm×1836mm,The drum is casting part with lebus grooved for 42mm( 1-5/8')  wireline.
( welded,replacable after worn )
- The drum shaft is driven by two (2) sets of two-shift gear box.
 Steps of speed: 2+2R(2 steps)
 Gear Box ratio:High speed:8.056,Low speed:14.783
- Equipped with pneumatic toggle valve anti-collision device.
- Kinematics draw works brake monitor and control system (Crown saver and floor saver:This is refer to 
Anti Collision System (ACS) Ingrated in VFD and Drillers Control - Cabinet system).
Crown saver / Crown-O-Matic, with emergency activator switch on Drillers console.
 
A 3.2. Auxiliary Brake System - Qty : 1 set
- AC –VFD Rig using regenerative braking, disc brake on main drum to be capable of being
used as Auxiliary brake which included in Item A.3.1
- Disk Brakes  (PSK Model:PS295/6750D) on main drum as fail-safe emergency / parking brake.
- Standard Disc Brake System with air-cooled Discs, 6 × hydraulic service calipers,
4 × Spring-set safety calipers, independent hydraulic power station , and Control Console. 
- Working brake torque:295kN.m,Parking release brake: 190kN.m,Emergency brake: 485kN.m
- Rated pressure of hydraulic disc brake operating system: 8 MPa
- Hydraulic power station of disc brake(Air cooling) Model:PY-01F  
- Rated pressure : 8Mpa
- Rated to suit minimum static hook load capacity 1,500,000 lbs of draw works.
 
A 3.3. Electronic Automatic Drilling System - Qty : 1 set
- Electronic automatic drilling system
- Achieved by Seperater Motor control, integrated in VFD system.
- Electronic feed for draw works controls to provide ROP control based on constant ROP,
Weight on Bit., differential pump pressure and torque.
- Four alternative modes include :
 - ROP----rate of penetration
 - WOB----weight on bit
 - MPP----mud pump pressure
 - DPT----drill pipe torque                                                                                                                       
- WEG Auto bit driller motor  Model:W22Xd-75kW-4-280S  Fundamental frequency power: 75kW                                                                                   
- Fundamental frequency torque : 401 N.m                                                                                       
- Cooling type: Forced air cooling,                                                                                              
- Protection degree of motor : IP56, with IEC explosion-proof certification.   
 
A 3.4. Makeup/Spinning Cathead - Qty : 1 set
- Makeup/Spinning Cathead(Telescope Type)
- Rated working pressure:2320psi/16MPa;
- Rated flow rate:120L/min;
- Wireline pulling force:350,000lb/ 160KN;
- Norminal rope stroke 1500mm
 
A 3.5. Breakout Cathead - Qty : 1 set
- Breakout Cathead(Telescope Type)
- Rated working pressure:2320psi/16MPa;
- Rated flow rate:120L/min;
- Wireline pulling force:350,000lb/ 160KN;
- Norminal rope stroke 1500mm
 
A4 Travelling Equipment
A4.1. Travelling Block 750-ton Capacity - Qty : 1 set
- Travelling Block 750-ton/6750KN capacity .
- Number of sheaves:7
- Sheave diameter:φ1524(60")
- Grooved for  φ42mm(1-5/8') wireline.
- Conforming to API 8C  5th Edition PSL1 
- To be API monogrammed, possessing valid API-8C certificate.
- With one(1)Hydraulic wireline cutter.
        -  Max. cutting diameter :48mm; Max.shearing force:20T;
- With six(6) Snake line for wireline stringing.
        -  Natural length 1600mm,Traction force 40KN.
 
A4.2. Weldless Elevator Links - Qty : 1 set
Weldless elevator links, 4-3/4" x 252", 750 ton capacity. Conforming to API 8C,PSL1
 
A4.3. Weldless Elevator Links  - Qty : 1 set
Weldless elevator links, 3-1/2" x 144", 500 ton capacity. Conforming to API 8C,PSL1
 
A4.4. Weldless Elevator Links  - Qty : 1 set
Weldless elevator links, 2-3/4" x 132", 350 ton capacity.Conforming to API 8C,PSL1
 
A4.5. Weldless Elevator Links  - Qty : 1 set
Weldless elevator links, 2-3/4" x 252", 350 ton capacity. Conforming to API 8C,PSL1.
 
A4.6. Drilling Line - Qty : 7500ft
φ42mm(1-5/8') Drilling line to suit minimum static hook load capacity.
Right hand, as per API Spec.9A.
 
A.5. Rotary Group and Top Drive
A.5.1. 37-1/2” Rotary Table - Qty : 1 set
- Heavy Load 37-1/2" rotary table:
- Max.Static Load:7250KN;
- Rated Speed:300RPM;
- Gear Ratio:3.62;
- Max.torque:45000N·M(@0-110RPM);
- Make: BOMCO,holding valid API-7K certificate.
- Main AC Motor: 5GEB22A5, 858KW, 600V,Make: GE. With IECEX/ATEX
- Rotary table independent drive device:
    - Reducer:  i=1.6920
    - Coupling: BJS435A 
    - Cardan shaft:BHJ350F530
    - Inertia brake:5022A
 
A.5.2. Rotary Table Master Bushing and Insert Bowl - Qty : 1 ea
- Complete with a ZP375 master bushing (MPCH), with the following insert bowl:
 - Split insert bowl # 1 (11-3/4" – 13-3/8"),1 pc
 - Modified Split insert bowl # 1 (to handle 14"tubulars),1 pc
 - Split insert bowl # 2 (9-5/8" – 10-3/4"),1 pc
 - Split insert bowl # 3 (2-3/8" – 8-5/8"),1 pc
- Lifting hook for removing and installing bushings and bowls( 2 hooks for bowls,4 hooks for bushing).
 
A.5.3. Casing Bushing - Qty : 1 ea
- Casing bushing, split type for 30",24" and 18-5/8" casing.
 
A.5.4. False Rotary Table - Qty : 1 set
- False rotary table suitable for running 5-1/2" drill pipe string inside 30" ,24" and 18-5/8"  Casing.
- Rated load capacity 200 tons.
 
A.5.5. Electrical AC or DC powered Top Drive System - Qty : 1 set
- Electrical AC powered Top Drive System
- Model DQ90BS-JH
- Rated Hoisting capacity 750 tons.
- Power Supply 600VAC/50Hz
- Main Motor Rated Power  2X450KW(continuous)
- Drilling Torque 76KN·m
- Max. Break-out Torque 120KN·m
- Rotary Speed 0~220r/min
- Backup Tong Range φ87mm~φ230mm
- Mud Circulating ID Φ89mm
- Equipped with top drive body, top drive guide rail, top drive travelling cable, top drive
VFD room, driller control console.
 
B Mud System
B.1. High Pressure Mud System
B.1.1. Triplex Mud Pump Unit - Qty : 3 sets
- Triplex Mud Pump, Rated input 1600 HP
- Model ·F-1600HL
- Rated power:1600HP
- Rated stroke:120spm 
- Stroke length : 12"
- Ratio:4.206:1
- Max. working pressure:52Mpa
- Valve cavity:API 7#
- Max. liner size:7"
- Inlet flange:12" (305mm)
- Outlet flange:5 1/8"
- Shear pin type safety valve:JA-3
- AC motor
- Qty.: 1 pc for each pump
- Rated power:1200kW
- Rated voltage:600V                                                                 
- Explosion proof standard: CNEX
 
B.1.2. WP Rotary Hose - Qty : 2 pcs
- ·4" ID x 75ft long x 7500 psi WP rotary hose,FSL Level 2,-20°C ~ 82°C, in accordance with API 7K
 
B.1.3. WP Bumper Hoses - Qty : 7 pcs
- ·4" ID x 15ft long x 7500 psi WP bumper hoses ,FSL Level 2,-20°C ~82°C, in accordance with API 7K
 
B.1.4. WP Dual Stand Pipe Manifold - Qty : 1 set
- 5"ID x 7500 psi WP dual stand pipe manifold with 5" ID 7500 psi WP  full opening gate
values feeding with 2 independent 5" x 7500 psi WP mud pump discharge lines coming
from a mud pump discharge  manifold. Mud pump Discharge manifold 7500 psi WP,
to be designed so that any of the 3 pumps can be lined up for 2 mud lines to sub base. 
- 2" x 7500 psi valves from manifold to upper kill line, lower kill line, cellar jet and one
for displacing cement, or other general circulating from rig floor level. 
- 2" x 7500 psi working pressure steel line with designated valve from rig floor
to choke manifold for reverse circulating. 
- Gate valve adopts welding valve.
- Stand pipe manifold include five(5) nos 5" gate valves and nine(9) 2" gate valve.
Ground HP manifold include ten(10) nos 5" gate valves and one(1) 2" gate valve.
- Gate valve will be from Demco, Union will be from Kemper
 
B2. Low Pressure - Mud Pump
Design Principals for Mud System
Mud Tank System :
• Mud system total capacity 4990 Bbl (usable) with active Mud system capacity:
1990 Bbls and reserve tanks of 3000 Bbls.
The volume of tanks calculate decrease 150 mm from the top surface of Tanks.
• All the solid control equipments sized for handling 1500 GPM mud.
• Capable of handling mud up to 21 ppg.
• All reserve pits are to be connected to the mixing system so that mud can be
transferred and treated  in any pit independently
• As much as practical, tanks to have no internal piping or obstructions.
Only suction pipe, mud guns, equalisers and dump valves will enter the tank.
Suction and Discharge lines to be run from all tanks for flexibility and rapid
weight and for lining up as active tanks.
• Double deck top for tanks( except shale shaker tank I Or a safe walkway
to eliminate piping or other obstructions on top deck. Sufficient service gates
in top deck. Piping to be kept below grating. 
• Mud trough sized for  1500 GPM(Mud trough on top of tank and below double deck)
• Where possible all valves to be outside the tanks and/or above mud level. 
All valve operators or handles to be below the grating level.
• All tanks to have 42" handrails.
• All tank compartments to have knife dumps and bottom feed to dump header.
• All tanks to have fixed, overhead sunshade cover with mist system
coving all mud system area.
• All suction valves on the mud tanks will be accessible from the surface for repairs
and contain high quality sealing components that are oil based mud compatible. 
• All the motors and control units to be explosion proof type
• One mud duty room is installed on the tank.
Low pressure mud system, Butterfly Valves and Unions.
 
B2.1. Centrifugal Pump - Qty : 11 set
- 6" x 8"-14 centrifugal pump with 75KW Explosion proof AC motor
 
B2.2. Centrifugal Pump - Qty : 4 set
- 2"×3"-13 centrifugal pump with 11KW Explosion proof AC motor
- Two(2) for trip tank, Two(2) for water cooling tank.
 
B2.3. Mud Processing /Treatment - Qty : 35 set
• Mud Agitators :
Impellar size 1140mm, Power 18.5KW, Qty  6 pcs
Impellar size 1040mm, Power 15KW, Qty  27 pcs
Impellar size 960mm, Power 11KW, Qty  1 pc
Impellar size 500mm, Power 2.2KW, Qty  1 pcs
 
B2.4. Mud Tanks
- Flat Bottom Tank, with slanted internal bottom. 
 
B.2.4.1 Shaker Tank I - Qty : 1 set
- Shaker Tank I comprising of the following pit compartments :
a) Sand trap:  100 bbls. Capacity with provision for long tapered dump
 
B.2.4.2 Shaker Tank II - Qty : 1 set
- Shaker Tank II comprising of the following pit compartments :
a) De-sander /Degasser tank - 200 bbl. capacity.   
b) De-silter pit -  200 bbl. capacity.
 
B.2.4.3 Intermediate Tank - Qty : 1 set
- Intermediate Tank comprising of the following compartments :
Compartment 1- 240  bbl.
Compartment 2 - 300 bbl.
 
B.2.4.4  Suction Tank - Qty : 1 set
- Suction Tank  - 500 bbl. Tank is partitioned in two equal size compartment.
 
B.2.4.5 Mixing Tank - Qty : 1 set
- Mixing Tank  comprising of the following compartments:
- Mix/Premix Tank for mixing  -150 bbl. 
- Mix/Premix Tank for mixing -200  bbl. 
- Pill/Slug Tank -100 bbl.
 
B.2.4.6 Mud Reserve Tank - Qty : 1 set
- Mud reserve storage tanks, each of 500 bbl. capacities. 
- Each tank divided into two (2) Compartments, each of 250 bbl.
 
B.2.4.7 Trip Tank& Water Cooling Tank - Qty : 1 set
Trip Tank& Water cooling tank are installed on the one skid. Trip tank - 120 bbl. capacity.
There are two compartments, each compartment is 60 bbl. 20m³ Water cooling tank
is used for drawworks gearbox, rotary gearbox, etc.
 
B.2.5. Shale Shaker
B.2.5.1 : Flow Dividers to the 4 shale shakers and 1 combo type shale shaker
with flow bypass. Flow Divider box to be capable to handle 1500 GPM of flow.  - Qty : 1 set
 
B.2.5.2 : 
- Derrick   Hyperpool / 4-Panel High "G"
- Linear motion Shale shakers powered with vibrating motors that produces
High G – 8 G force and with 4 panels with top feeding wiers . Along with
API-RP-13 C complaint replacement Screens (80 to 325 mesh sizes) to be
suitable for flow line temperature up to 200° F.
 - Qty : 4 sets
 
B.2.5.3 : Screens type – Pyramid - Qty : 1 lot
Screen Size :   80 , Qty : 20
Screen Size : 100 , Qty : 20
Screen Size : 120 , Qty : 20
Screen Size : 140 , Qty : 40
Screen Size : 170 , Qty : 40
Screen Size : 200 , Qty : 40
Screen Size : 230 , Qty : 40
Screen Size : 270 , Qty : 40
Screen Size : 325 , Qty : 20
 
B.2.6 Mud Cleaner - Qty : 1 set
- Hyperpool / 4-Panel High "G" Combo type Linear motion shale shaker of same
model as above shakers with combination of de sander and de silter on top .
(Combo type) to be lined up as 5th shale shaker) along with replacement
screens of above sizes. Desander and Desilter  will be capable of handling 
1500 gpm of mud.
- Three (3)-10" Desander Cones
- Twenty (20)-4" Desilter Cones
 
B.2.7 High Pressure low volume wash gun and mud ditch magnet at shakers - Qty : 1 ea
 
B.2.8 Decanting Centrifuge - Qty : 2 sets
- Variable Frequency Drive  Centrifuge
- 50 horsepower (37kw/60HZ/460V) – Main Drive
- 20 horsepower (15kw) – Back Drive
- With feed pump,10HP/460V/60HZ
 
B.2.9 Degasser - Qty : 1 set
- Derrick Vacu-Flo for handling 1200 GPM.
 
B.2.10 Mud Gas Separator - Qty : 1
- Mud Gas Separator
- “Poor Buoy” vertical mounted mud gas separator, 48” OD x 15ft high with 6” OD inlet
from choke manifold, 10” OD return line to shale shakers with mud seal of 15 ft 8” OD
vent line, 6” OD drain and all necessary piping to connect to choke manifold,
shale shaker tank and flare line.
 
- Detail information :
Type:HMGS1200-1.0A
Vessel dia.:1200m  
Working pressure: 1.0MPa    
Flow capacity:300~350m³/h
liquid inlet:DN150
liquid discharge outlet:DN250
With ignition device &70m flare line.
- To be certified by third party as per ASME 
 
B.2.11 14"Augers - Qty : 3 sets
- 14"Augers–  to carry cuttings from centrifuge, shakers &Desander/ Desilter to
mud cutting waste pits eliminating water-jetting.
 
B.2.12 Mud Hoppers
B.2.12.1 Mud Shearing / Mixing / Blending Integrated system (Lobestar from Vortex Venture) - Qty : 2 sets
- Mud Shearing / Mixing / Blending Integrated system (Lobestar from Vortex Venture ),
complete, incorporating shear flow loops, mixing hopper and blending manifold.
Flow rate of 1000 GPM each, 2000GPM in total.
 
B.2.12.2 6" mud mixer hoppers with 6" Venturi. - Qty : 2 sets
- Treatment Capacity:(200m3/h),
- Bore of inlet:6",Bore of outlet:6";
- Inlet pressure:0.3-0.6Mpa,Outlet pressure:0.1-0.2Mpa;
- Nozzle diameter:2"(50mm);
 
B.2.12.3 Hopper skid - Qty : 1 set
- Hopper skid has capacity to accommodate-  four (4) Hoppers, 
- Mud dock for material storage.
- Use the second floor of hopper skid as mud dock.
- Mud dock for material storage with jib crane capable to load chemical bags on all Hoppers .
- Air crane, Rated load: 3t , hositing height:6m
 
B.2.13 Mud Silo Table - Qty : 1 set
- Suitable stand / framework for installation of Deck Silos / Hammer Bins
- An indicative drawing of the Mud silo is enclosed.
 
B.2.14 Cellar jet - Qty : 1 ea
- Cellar jet constructed of 6" OD pipe with 2" NPT x 3/4" orifice jet nozzle nipple installed
in 90° long radius ell.  6" line runs from cellar bottom to mud tank with outlets to shale
shaker and reserve/waste pit.  Fluid is supplied to jet nozzle by 2" high pressure line
from stand pipe discharge manifold.
- With one FLYGT Submersible electrical explosion proof type pump,HT454 20HP added hose
 
C Power Package
C.1 Generator sets :  - Qty : 7 sets
Model: CAT3512B+SR4B,7sets
Engine power: CAT3512B,1101 bkW@1200 RPM
Generator sets: SR4B, 600V/60HZ, 980EKW c/w fan.
Totally 8 sets, generator houses included. 
 
 C.2 Auxilliary Generator  - Qty : 1 set
Model: CAT C18
480V/60HZ, 545KW c/w fan.
 
C.3 Rig VFD system - Qty : 1 set
- VFD system.
- Equipped with A/C control system, motor control panel, generator control equipment
and lighting panel, all located in  air-conditioned control room with suitable roof mounted AC units.
 
C.4 WellSite Ex-proof circuit and lighting - Qty : 1 lot
- WellSite Ex-proof circuit and lighting
- Rated Voltage:600V/110V
- Rated frequency: 60Hz;
- UL/IEC/ATEX/CNEX explosion-proof standard.
- Explosion-proof requirement:The Ex e or Ex d explosion proof is used for the drilling floor area.
- Distribution Box and Magnetic Starter Box
- Lightings(Flourescent type)
- Cables (Exane or equivalent) 
- Plus and socket
- Cable tray(including grasshopper and folding cable tray).
- Includes the  cable tray from VFD to solid control area, mud pump area,
drilling floor area (including the mast), and generator houses and to other support equipment.
 
D Rig Instrumentation, Control and Automation
D.1 Drillers Cabin cum Dog House - Qty : 1 set
- The cabin’s walls and the console are made of 304 stainless steel.
The main frame and base are made of carbon steel. The middle of the wall
insulation filling rock wool,well insulated.
- Dog house and cabin dimensions is 2750mm(W)x 7500mm(L)x 2950mm(H
)with attached cabin of 2700×2750mm.
- DCC designed to allow for ergonomics,positioned above the floor level
with safety windows with wiper system to allow clear view of the rig floor.
Have a good sight of mud pumps, monkey board and drawworks.
The windows are provided with safety nets and security bars. The glass
shall be made from Bullet-proof glass.
- The Drillers Cabin will have typical instrumentation/ equipment as listed below:
- Equipped with driller`s integrated chair. The drawworks operation and main
operation of Top drive can be realized on the driller chair and SIMATIC HMI.
- Draw works Joystick Controls,Top Drive Control.Drilling instruments and CCTV.
- One Ex-proof emergency lights .One Ex-proof power switch box.
- Drillers cabin  equiped with  two sets of  HVAC (Top mounted)  which
refrigerating capacity about 7kW. Doghouse equiped with two window
 Air Conditioner which refrigerating capacity about 5kW.
- Ex telephones. Rig alarm horns, fire extinguisher. 
- All plugs and receptacles for console connection.
- All operations are controlled from the Drillers Cabin.
 
D.2 Closed Circuit Television system (CCTV) - Qty : 1 set
- Closed Circuit Television system (CCTV) with recording and storage capabilities
for 2 wells backup data(24months),colour remote control camera system at
below the Crown block, Monkey Board, stabbing board and under sub
structure(all rotating camera,all explosion-proof type), with  explosion proof 
monitor(one display screen with four pictures) and controls at Drillers console.
and two monitors in both rig supervisor and toolpusher cabins.
- Working temperature:-30~60℃;
- Relative humidity:0-90%RH;
- Working voltage:120V-260V,47HZ-63HZ;
- The CCTV system consists of camera unit,controller,display screen,keyboard,
connecting cables.
 
D.3 Rig Instrumentation System - Qty : 1 set
- Electronic, Computer controlled rig instrumentation system,
MD Totco- Rig Sense3.21 control systems, incorporating  real-time
data acquisition for usage at rig, display and logging of all rig, pump pressure,
mud flow and volume information and alarm systems.
- Instrumentation system to be equipped with both Analog and Digital displays.
- Analog display is refer to Weight Indicator,pressure gause,etc.
- Suitable for area classification Class-1-Div-1.
- The system will provide for hard copy record of daily parameters and electronic
database storage and retrieval of data to common Windows based computer systems.
- System to cover the requirements under H.2.a to H 2.c through one system.
 
D.3.1 The system will provide for hard copy record of daily parameters and
electronic database storage and retrieval of data to common Windows based
computer systems.
 
D.3.2 The system will include the following measurements :
• Hook Load
• Block Position 
• Block Speed
• ROP
• Drilling Torque, Top Drive and Rotary
• Rotation speed, Top Drive and Rotary
• Tong line pull
• Mud Pumps; each pump & total all pumps
• Pump speed
• Pump strokes
• Total strokes
• Standpipe pressures
• Choke Manifold pressures
• Kill Line Pressure
 
D.3.3 MD Totco HMI as pit level (total 23nos mud leval sensors )and flow show
monitor system with alarm device complete with the following features :
• Total pit volume and individual tank volume for all active , mixing and reserve pits.
• Trip tank volume.
• Mud pit gain or loss in bbls.
• Mud flow as percentage of total flow.
• S. P. M. and continuous strokes for each mud pumps.
• Electronic digital monitoring/hard copy printout recording system for total volume and flow line
 
D.3.4 Will have Alarm Systems for
• Active Pit Level
• Mud return flow rate alarms; High/Low
• Rate of Penetration; High
• Pump Pressure; High/Low
 
D.3.5 The rig control system will be capable of automatic control of the following :
• Block Speed while running drill pipe, casing, tubing, etc., to rated maximum load.
• Block Proximity Limits; Crown & Floor
• Top Drive/Rotary Torque
 
D.3.6 Penetration rate while drilling, reaming, etc., based on;
• Bit Weight
• Pump Pressure differential. and 
• ROP limits
• Torque
 
D.3.7 Data Monitor System
- Data Display Monitors, independently configured, networked to data storage
system for real time or achieved display of all rig data, with graphical, analogue and
numerical display options :
• 1 Drillers Console(HMI)
• 1 Drillers Doghouse(HMI)
• 1 Contractors Office(Rigsens cilinet)
• 1 Operators Area Supervisor Office(Rigsens cilinet)
• 1 Operators Rig Site Supervisor Office(rigsense server)
• 1 Mud Lab(LCD Screen)
 
D.3.8 Data printer systems for hard copy data record, configurable for digital or
graphical output based on time or depth.
 
D.3.9 Data printer/recorder system dedicated to real time, 24 hour, continuous,
8 channel, graphical hard copy recording of critical rig data including;
• Hook Load
• Rate of Penetration
• Top Drive/Rotary Speed
• Top Drive/Rotary Torque
• Total Pump Speed
• Pump Pressure
• Return Flow Rate
• Pit Level
 
D.4 Deadline Anchor - Qty : 1 set
- Deadline Anchor JZG72E
- Max. deadline pulling force: 720KN;
- Output Pressure 9Mpa
- Output Pressure Error: ±1.0% FS
- Suit for M/D E551 Sensor
- With the MD Totco sensator and weight indicator.
 
D.5 Rig Intercom & Public Address System - Qty : 1 set
- Rig Intercom & Public Address System; Stations at all Operators Offices,
Mechanic Office, Senior Toolpushers Office, Drillers Console, Drillers dog house
Shale Shaker w/hood, Mud Tanks, VFD Cabin, Mud Loggers Cabin, End of
Catwalk for Cement Unit, Mud Engineer Lab, MWD unit, monkey board,
choke panel, and two spare units. 
- Explosion proof suitable for use in Hazardous areas and to withstand harsh
effects of environment
- Total of 17 stations required. 
- Manufacturer Gaitronics 
 
D.6 Rig Paging System - Qty : 1 set
Rig Paging System : For recording (the recording should be at lest 30days
and be shared by the contractor.) the instructions passed between Driller
and Tool Pusher or between Company Man and Tool Pusher. Explosion proof
suitable for use in Hazardous areas and to withstand harsh effects of environment.
Manufacturer : Gai-Tronics USA 
 
E Auxiliary Rig Equipment
E.1 Hoists
E.1.1 Rig Floor Winch - Qty : 3 sets
- Hoist, 10,000 lbs, one (2) located at drill floor, one (1) located at the end of catwalk.
Specification :
-  Air pressure :116psi/0.8MPa;
-  Max. pulling force :10,000 lbs/5T;
-  Rope capacity :120m;
- Wireline Dia. :Ø20mm(3/4")
 
E.1.2 Winch - Qty : 1 set
- Hoist, 20,000 lbs, located at drill floor on driller side for Drill Collars/ Heavy lifts.
Specification :
- Max. lifting capacity:100KN
- Max. rope speed:20m/min
- Rated power:30KW
- Rated air inlet pressure:0.8MPa
- Rated air consumption:24m3/min
- Rope capacity:120m
- Wireline diameter:24mm
 
E.1.3 Man Rider Winch - Qty : 2 sets
- Winch on rig floor, 330lbs/150 Kg capacity, Certified Man rider includes
external relief valve,operating valve, and testing ports.
- All on rig floor.
- Will be fail safe system.
- Man Rider Line Pull Rating:  330 lbs. (150 kg) on 2nd layer
- Man Rider Line Speed:  Variable, 0 - 98 fpm (30 m/min) on 2nd layer
- Wire Rope Storage Capacity: 505 feet (154 m) with 7/16 inch (10mm) dia.
wire rope on 5 layers
- ATEX Compliance:  Standard.  Includes drum guard, overload protection,
emergency stop, limit switch, muffler and ATEX marking.
- Testing :  Standard load test to 180% SWL
- Pressure:  75 psig (5 bar) – 105 (7 bar) at the air inlet (dynamic)
- Flow:  88 cfm (2.5 m3/min)
- 1ea on Rig floor and 1ea in Subbase
 
E.1.4 Racking Board Winch - Qty : 1 set
- 1-Tonne Utility Air Winch for Racking Board with remote operator pendant to function.
 
E.2 Air Compressors
E.2.1 Air Compressors  - Qty : 3 sets
- Air Compressors for 535 CFM at 145 psi/1MPa each equipped with dual controls,
including pipes valve fitting and two air receiver tanks of 600 gallons.
- Discharge Capacity: 535CFM(15.15m3/min)
- Rated Discharge Pressure:145psi(1.0MPa)
- Max.Working Pressure:154psi(1.06MPa)
- Cooling Type:Air cooling
- Max.Ambient Temperature:55℃
- Max.Dischage tepemerature:55℃+8~15℃
- Motor:90kW
- Air tank):four(4) total
- Two(2) 2.5m3 in Air house,two(2) 1.5m3 under sub-base
 
E.2.2 Air Dryer - Qty : 1 set
- Air Dryer to suit the air supply capacity of two air compressors working and one for spare.
- Model ; HD-25HTF, capacity: 27m3/min
- C/W one prepositive filter  and one postpositive filter.
 
E.2.3 Auxiliary Air Compressors - Qty : 1 set
- Quincy QT-7.5 Air Compressor –150 psi, driven by diesel engine for cold start application.
Features :
ACFM @ 175 psig: 22.0 
RPM: 990
 
E.3 Water, Oil and Fuel System
E.3.1 Drill water Storage tank - Qty : 5 sets
- Drill water Storage tank 500 bbl each
- Flat bottom,Top Opened
- 2 pcs of Centrifugal pump included, 600V,60HZ
 
E.3.2 Four compartment oil lubster for storage of oil lubricants - Qty : 1 set
 
E.3.3 450 bbl Diesel Fuel Tank - Qty : 1 set
- 450 bbl diesel fuel tank complete with circulating and filtration system for rig
engines and two (2) 1-1/2" x 2" transfer pumps. Double skin and level indicator .
 
E.3.4 450 bbl. Mud-Diesel Storage Tanks - Qty : 2 sets
- 450 bbl. mud-diesel storage tanks.  2 pcs
- Fuel storage tank with doubled walled type construction.
The storage tanks will be fitted with :
• Level indicators to know the volume of the contents in the tank. 
• Air breather with flash back arrestor
• Over flow line 
• Access/egress ladder
• 1set 3" x 4" mud diesel transfer pump for two mud-diesel storage tanks.
 
E.4 Rig Floor Tools
E.4.1 General Assembly Parts - Qty : 1 set
Air winch support, location block for generator house, guard rail, rotary table
cover plate, air tank bracket, mud umbrella, etc.
 
E.4.2 Hydraulic Wire Cutter - Qty : 1 pc
• Max. cutting diameter :48mm;
• Max.shearing force:20T;
 
E.4.3 Hydraulic Jack - Qty : 2 ea
30T,50T,100T
 
E.4.4 Wireline Stringing Unit : Ф42 - Qty : 6 pcs

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


--------------------------------------------------------------------------------------------------------
Search words (for official use only) :
3000HP Electric Deep Drilling Rig - For Sale
Deep Land Drilling Rig for Sale
3000hp Deep Drilling Rig for Sale
Electric Drilling Rig for Sale
New Electric Land Drilling Rig - 3000hp - for Sale

----------------------------------------------------------------------------------------------------

 
Ingersoll-Rand CM-780D Blasthole Drilling Rig for Sale
Worldoils Marketplace
Ingersoll-Rand CM-780D Blasthole Drilling Rig for Sale

Worldrigs ID: WR781

Ingersoll-Rand CM-780D Blasthole Drilling Rig for Sale
2003 Built Ingersoll-Rand CM-780D Blasthole Drilling Rig


Model : CM-780D Blasthole
Manufacturer : Ingersoll-Rand
Year : 2003
Condition : Used

Description :

2003 Ingersoll-Rand CM-780D Blasthole Drill Rig
Crawler Mounted
Caterpillar Diesel Engine
S/N: G78255EL
IR HR2 865 CFM / 350 PSI Air Compressor
Water injection
Hammer Lubricator
Thread Greaser
Enclosed Cab
A/C & Heater
Rod Changer
13-1/2" Track Shoes
Set up for (3-1/2”O.D. x 13.1ft) Drill Pipe 21/2Z thread
Meter Reads 15,940 Hours

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Ingersoll-Rand CM-780D Blasthole Drilling Rig - 2003 Built
Used Drilling Rig - Ingersoll-Rand CM-780D Blasthole
Ingersoll-Rand CM-780D Blasthole Used Drilling Rig
Ingersoll-Rand Drilling Rig for Sale in USA
Used Ingersoll-Rand Land Drilling Rig for Sale in USA
Gardner Denver 1000 Drilling Rig for Sale
Worldoils Marketplace
Gardner Denver 1000 Drilling Rig for Sale

Worldrigs ID: WR2744

Gardner Denver 1000 Drilling Rig for Sale
Drilling Rig - Gardner Denver 1000 - For Sale


Model : 1000 Drill Rig & Package
Manufacturer : Gardner Denver
Condition : Used

Description :

Gardner-Denver 1000 Drill Rig
14W Drawworks
7-1/2" Rotary Table
Rated for drilling to 1000 ft
Dis-assembled for rebuild
Deck steel replaced in preparation for rebuild
Comes with all components necessary to rebuild back to original specs:
2-stage mast cylinder
3- large 8-1/2 ft outriggers
Piston style WX 1004 compressor (stored inside building)
Gardner-Denver FXG 5x6 mud pump (stored inside building)
24 ft 3-3/8" fluted kelly bar
Little Giant Swivel
Mayhew block for 1000 rig 12" single sheave
292 ft of 3-1/2" flush drill pipe

- 16 ft skid for set up for Gardner Denver 5x8 mud pump, Detroit 353 Diesel
Engine with Rockford clutch (1600 hours), with 150 gallon fuel tank
- GMC 6-71 Power Unit with Rockford clutch, Rotary table slips, Blue Demon
- Drag Bit 5, spools of cables, assorted bit breakers, 2" relief valve, pipe clamps
and pick up heads, compression coupling and 4" valve, steel mud tank
- 2-3/8" IF to 3-1/2" Reg pipe to bit tubs, pipe spider rings, Rotary Table
- Drill Up slips, shop built collars, T-Pipe for starter, cross over sub adapters, Tool
holder for pipe in table, Petol chain wrenches, regular chain wrenches, Set of
banded v-belts for mud pump skid, 2 rods for GD gear end, bull gear and
eccentric, 2 pairs of sleeves for GD 5x8, valves caps for GD 5x6, cylinder head
for GD 5x6, safe guard and Dodge gear boxes for mud pumps, pinion gear for GD
5x8 duplex 90%, new electric motors 1/2 HP - 3/4 HP - 1 HP stub shaft, power
tower for Keystone Gardner Denver, miscellaneous bits
- 1973 Ford 8000 truck
- Caterpillar 3116 diesel engine
- 10-speedRoadranger transmission

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Gardner Denver 1000 Used Drilling Rig for Sale
Land Drilling Rig - Gardner Denver 1000 - for Sale
Used Land Drilling Rig for Sale in USA
Used Gardner Denver 1000 Drilling Rig for Sale in USA
Gardner Denver 1000 Land Drilling Rig for Sale

-------------------------------------------------------------------------------------------------------
 
Small Coastal Container Vessel
Worldoils Marketplace
Small Coastal Container Vessel

Worldrigs ID: WR722

Small Cargo Ship For Sale
Small Container Vessel For Sale
Coastal Container Vessel


General
Type : General Cargo Ship
Year of delivery : 1978, rebuilt / boxed 1983
Classification : DNV
Gear/gearless : Gearless

Vessel Particulars
Length o.a. : 88,00 m
Length p.p : 84,00 m
Beam : 12,70 / 12,96 m
Draft max summer : 5,08 m ; 4,97m
Airdraft : 24,30 m; ballast 21,50 m; loaded 19,3 m
Gross tonnage : 2020 mt
Net tonnage : 1000 mt
Deadweight : 3016,9 / 2913,7, mt
DWCC Summer : abt. 2800 mt
DWCC Winter : abt 2700 mt

Hatch and Hold
No. of holds/hatches : 1 hold / 2 hatch
Hatch cover type : Poontoon
Hold dimensions : 1 hold but a strong beam; 57,0 m x 10,0 m x 6,86 m
Hatch dimensions : Aft 38,50 m x 10,0 m and forward 12,90 m x 10,0 m
Grain/ Bale Space : Abt. 130.246,82 cbft
Strength : on tanktop: 6 mt / sqm ; on deck : abt. 1.40 mt/sqm
Tweendeck : No
Bulkhead : No, 1 beam

Technical details
Main Engine : MWM TBD500B, 2200 BHP
Aux Engines : Scania DC 1101 MO INV – 2 pcs
Shaft generator : No
Emergency / Harbour generator : Scania D1101 AOGNV
Bowthruster : Bow 300 HP
Speed : abt. 9,5 kn always subject good weather conditions / bf 2 / no swell

Consumption per day
at sea abt. 4,7-5,3 mt MGO DMA
at port abt. 0.3 mt MGO DMA

Tank capacities
MGO abt. 145 cbm
ballast abt. 843 cbm
freshwater abt. 32 cbm

Container Capacity (20')
Hold : 60
Deck : 36
Total : 96 (20')
Reeferplugs : No

Accommodation : 8 persons, 8 cabins

Class : + 1A1 R1 general cargo carrier container HC EO

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------
Search words(for official use only) :
Small Cargo Ship for Sale
Small Container Vessel For Sale

General Cargo Ship
Small Cargo Ship For Sale In Europe
Coastal General Cargo Vessel
Coastal Container Vessel

---------------------------------------------------------------------

 

 
   
1 2 3 4 5 6 7 8 9 10
  


Featured equipments for sale
 
201ft Fast Supply Vessel for sale
Worldoils Marketplace
201ft Fast Supply Vessel for sale

Worldrigs ID: WR2797

201ft Fast Supply Vessel for Sale
FSV - 2014 Built for Sale


Description :

General
Vessel Type : FSV - Fast Supply Vessel
Vessel Class : Crew Boat
Year Built : 2014
Classification : ABS

Dimensions
Dimensions : 201 ft. X 32 ft. X 14 ft. 6 in. (61.26 m X 9.75 mX 4.42 m)
Length Overall : 200 ft.Clear Deck140 ft. x 26 ft. 6 in. (42.67 m x 8.08 m)
Deck Length : 191 ft. (58.22 m)
Cargo Deck Area : 3,710 sq. ft. (344.67 sq. m)
Deck Cargo Capacity : 395 LT (401.34 MT)
Deadweight Tonnage : 488 LT (495.83 MT)

Capacities
Fuel Oil : 40,000 gals. (151.42 cu m)
Ballast : 68,230 gals. (258.28 cu m)
Potable Water : 900 gals. (3.41 cu m)
Lube Oil : 840 gals. (3.18 cu m)
Waste Oil/Bilge Oil : 420 gals. (1.59 cu m)

Special Features
Positioning : DP 2
Steering and Controls : Four (4) IMS 5 HP Electro/Hydraulic
Steering Units, Three (3) Stations

Firefighting : Two (2) Monitors @ 6,000 GPM each CO2
Fire Suppression and Alarm Monitoring Systems

Oil Dispersant System

Machinery
Main Engines : Four (4) 3512C CAT Diesels,  2,250 BHPeach @ 1,800 RPM
Bow Thrusters : Two (2) 200 HP Thrustmaster  30TT200-ALTunnels
Speed : 28 knots
Generators : Two (2) CAT C9 @ 80 kW

Electronics
Electronics Package :
Two (2) Furuno FAR2117 Radars, One (1) ICOM M504 VHF Radio,
One (1) Sea 235SSB Radio, One (1) Depth Recorder, One (1) Navtex Receiver,
One (1) Color Video Sounder, One (1) GPS, One (1) RLB-32 EPIRB, One (1) Loud
Hailer, One (1) Ideal G2HC Windlass, One (1) AIS, Marine Technologies DP 2
Integrated Vessel Control System

Accommodations
Accommodations : 4
Passengers : Normal Operations : 54
Passengers : Safety Standby : 86

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
201ft Fast Supply Vessel for Sale
FSV - 2014 Built for Sale
Fast Supply Vessel for Sale
Crew Boat for Sale
ABS Class FSV for Sale

-------------------------------------------------------------------------------------------------------
Available for selling

201ft Fast Supply Vessel for Sale
Contact Us
ID 2797
300 FT Platform Supply Vessel
Worldoils Marketplace
300 FT Platform Supply Vessel

Worldrigs ID: WR2794

300 FT Platform Supply Vessel
2003 Built Offshore Supply Vessel for Sale


Description :

General
Vessel Type : Methanol Carrier Vessel
Vessel Type : PSV - Platform Supply Vessel
Vessel Class : OSV - Offshore Supply Vessel
Year Built : 2003

Dimensions
Dimensions : 300 ft X 60 ft X 24 ft (91.44 m X 18.29 m X7.32 m)
Length Overall : 300 ft.
Draft (Lightship) : 7.76 ft. (2.37 m)
Draft (Loadline) : 19 ft 1.313 in. (5.82 m)
Freeboard (Loadline) : 4 ft. 10.625 in. (1.49 m)
Freeboard (Lightship) : 16 ft. 2.813 in. (4.95 m)
Clear Deck : 223 ft x 50 ft 7 in (67.97 m x 15.42 m)
Cargo Deck Area : 11,280 sq. ft. (1,047.95 sq. m)
Deadweight Tonnage : 4,791.88 LT (4,868.78 MT)

Capacities
Fuel Oil : 295,937 gals. (1,120.24 cu. m)
Ballast321,265.2 gals. (1,216.12 cu. m)
Potable Water : 32,998 gals. (124.91 cu. m)
Dry Bulk : 11,440 cu. ft. @ 80 psi (323.94 cu. m @ 5.5bars)
Liquid Mud : 15,644 barrels (2,487.2 cu. m)
Methanol : 1,836 barrels (291.9 cu. m)

Special Features
Tuggers : Two (2) x 4 Tons
Ship Motion : Two (2) Passive Type Anti-Roll Tanks
Ship Motion : Bilge Keels
Positioning : DP 2
Deck Crane : One (1) x 3,100 lbs. capacity

Machinery
Main Engines : Two (2) CAT 3608 Diesels
Total Propulsion HP : 6,600 HP
Bow Thrusters : One (1) 1,100 HP Swing Up
Bow Thrusters : One (1) 1,300 HP Tunnel
Stern Thrusters : One (1) 1,300 HP Tunnel
Speed : 12 knots
Generators : Two (2) x 910 kW, One (1) x 190 kW emergency

Life Saving Equipment
Life Rafts : Two (2) x 25-Man Inflatable Life Rafts
Life Rafts : Two (2) x 20-Man Inflatable Life Rafts
Life Rafts : Two (2) x 10-Man Inflatable Life Rafts

Rescue Boat/Craft :
FAST RSQ 450A 6-person Rescue Boat SOLAS and USCG approved

Other gear as required by authorities

Flow-Back / Chemical
500bbl Approvals :
12 x 500bbl TANKS (6,000 barrels) Onvessel deck - (8) tanks are capable of
carrying hazardous material (8x500bbl =4,000 barrels), All 12 tanks are capable
of carrying pollution material. Flow-Back carriage requires USCG approvals of
chemicals prior to carriage

Electronics
Furuno 2115 Radar System, Furuno FE-700 Depth Sounder,
Furuno NX-500 Navtex Receiver, Furuno DGPS Navigation
System, Furuno RC1515 GMDSS, Felcom 12 Inmarsat-C,
DSC AA50 Watch Receiver, DSC Encoder/Decoder Terminal,
EPIRB ACR 406 Electronics, SART ACR Electronics, Sea
Tel Satellite Telephone, Furuno DSC 60 Receiver, Furuno
FM 8500 VHF Radios, AD-100 Gyro Converter, FS 1562/15
SSB (Single Sideband Radio), RadaScan Guidance Navigation

Accommodations : 29

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
2003 Built Offshore Supply Vessel for Sale
OSV - 300 FT - For Sale
ABS Class OSV - 2003 Built - for Sale
Platform Supply Vessel - 29 Bunks - For Sale
2003 Built PSV for Sale

-------------------------------------------------------------------------------------------------------
Available for selling

2003 Built Offshore Supply Vessel for Sale
Contact Us
ID 2794
2004 Built Platform Supply Vessel for Sale
Worldoils Marketplace
2004 Built Platform Supply Vessel for Sale

Worldrigs ID: WR2795

2004 Built Platform Supply Vessel for Sale
280FT PSV for Sale

Description :

General
Vessel Type : PSV - Platform Supply Vessel
Vessel Class : OSV - Offshore Supply Vessel
Year Built : 2004
Classification : ABS, USCG, SOLAS, MARPOL

Dimensions
Dimensions : 280 ft X 60 ft X 24 ft (85.34 m X 18.29 m X 7.32 m)
Length Overall : 280 ft.Draft (Lightship)7 ft. 3 in. (2.21 m)
Draft (Loadline) : 19.24 ft. (5.87 m)
Clear Deck : 203 ft 6 in x 50 ft 6 in (62.03 m x 15.42 m)
Cargo Deck Area : 10,293 sq. ft. (956.25 sq. m)
Deck Strength : 1,200 lbs/sq. ft. (5.86 MT/sq. m)
Deck Cargo Capacity : 2,700 LT. (2,743 MT)
Deadweight Tonnage : 4,898.7 LT (4,976.6 MT)

Capacities
Fuel Oil : 299,672 Gallons (1,134 m3)
Ballast : 303,093 Gallons (1,147.33 m3)
Potable Water : 32,690 Gallons (123.7 m3)
Dry Bulk : 11,440 cu. ft. @ 80 psi (323.94 cu. m @ 5.5 bars)
Liquid Mud : 15,644 Barrels (2,487.2 m3)
Methanol : 1,836 Barrels (291.9 m3)

Special Features
Ship Motion : Two (2) Passive Type Anti-Roll Tanks
Ship Motion : Bilge Keels
Positioning : DPS - 2
Deck Provision Crane : One (1) x 3,100 lbs. Capacity @ 30ft Fixed Boom

Machinery
Main Engines : Two (2) x CAT 3608, 3,299 HP (each)
Bow Thrusters : One (1) x 1,200 KW Schottel STT 1010 TLKCP
Stern Thrusters : One (1) x 1,200 KW Schottel STT 1010 TLKCP
Swing Down Combination Thruster : One (1) x 1,100 HP Ulstein TCNC 73/M-180
Speed : 13 knots
Rudders : Two (2) Independent High Lift Type Rudder Systems
Propellers : Two (2) x Schottel SCP 077-1 XG 2,700mmDiameter (CPP)
Emergency Generators : One (1) x 190 KW, CAT 3306 (Radiator Cooled)
Ships Service Generators : Two (2) x CAT 3508B 910 KW (each)
Shaft Generators : Two (2) x ABB AMG 500 L 4 (2.0 mW each)

Life Saving Equipment
Life Rafts : Four (4) x 25-Man Inflatable Life Rafts
Life Rafts : Two (2) x 10-Man Inflatable Life Raft

Rescue Boat/Craft : One (1) x Fast RSQ 450A - 6 person capacity,
40 HP motor, Solas/USCG approved

Flow-Back / Chemical
Flowback Approvals :
Two (2) x On-Deck Flow-Back/Chemical Carriage Tanks
(7,100 Barrels Total Capacity Both Tanks)

500bbl Approvals :
8 x 500bbl tanks (4,000 barrels) onvessel deck - All (8) tanks are capable of
carrying either hazardous or pollution material.Flow-Back carriage requires USCG approvals of chemicals prior to carriage.

Accommodations
Accommodations : 29 Bunks - (8 x 2 Person, 3 x 4 Person, & 1 x1 Person)

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
2004 Built Platform Supply Vessel for Sale
280FT PSV for Sale
Offshore Supply Vessel for Sale
PSV - 2004 Built - For Sale
280ft OSV for Sale
29 Bunks PSV for Sale

-------------------------------------------------------------------------------------------------------
Available for selling

2004 Built Platform Supply Vessel for Sale
Contact Us
ID 2795
2009 Built Platform Supply Vessel for Sale
Worldoils Marketplace
2009 Built Platform Supply Vessel for Sale

Worldrigs ID: WR2796

2009 Built Platform Supply Vessel for Sale
Offshore Supply Vessel for Sale


Description :

General
Vessel Type : PSV - Platform Supply Vessel
Vessel Class : OSV - Offshore Supply Vessel
Year Built : 2009
Class : ABS, USCG, SOLAS, MARPOL

Dimensions
Dimensions : 280 ft x 60 ft x 24 ft (85.34m x 18.29m x7.32m)
Length Overall : 280 ft.
Draft (Lightship) : 7 ft. 3 in. (2.21m)
Draft (Loadline) : 19.44 ft (5.87m)
Clear Deck : 201 ft x 50.5 ft (61.27m x 15.40m)
Clear Deck Area : 10,151 ft2 (943 m2)
Deck Strength : 1,200 lbs/sq. ft. (5.86 MT/sq. m)
Deck Cargo Capacity : 2,545 LT (2,585 MT)
Deadweight Tonnage : 4,729.14 LT (4,806.39 MT)

Capacities
Fuel Oil :  
(Ship/Cargo)375,994.6 Gallons (1,423.29 m3) (NOTE:Cargo fuel
during sub-chapter L operations only)

Ballast : 304,253.8 Gallons (1,151.73 m3)
Drill Water : 90,430.3 Gallons (343.32 m3)
Potable Water : 41,335 Gallons (156.5 m3)
Dry Bulk : 11,442.4 ft3 @ 80 psig (324.01 m3 @ 5.5bars)
Liquid Mud : 13,322 Barrels (2,118 m3)

Special Features
Tuggers : Two (2) x 12,000 Lbs. Line Pull, Tulsa Winch1241W-81157
Ship Motion : Two (2) x Passive Type Anti-Roll Tanks
Ship Motion : Bilge Keels
Positioning : DPS - 2
Deck Crane : One (1) x 3.0 LT SWL, 30ft Fixed Boom, (MCF-530 North Pacific Crane)
Firefighting : Two (2) x 5,283 GPM Fire Monitors, JasonEureka  (MM602HD-C-01)

Machinery
Main Engines :
Two (2) x C-280-8 Caterpillar (CAT) DieselEngines @ 3,299 HP Each

Bow Thrusters :
One (1) x Brunvoll FU80 1,050 KW @ 1,190RPM, 4-Blade FPP
Propeller @ 2,000mm Dia.

Stern Thrusters :
One (1) x Brunvoll FU80 1,050 KW @ 1,190RPM, 4-Blade FPP
Propeller @ 2,000mm Dia.

Swing Down Combination Thruster :
One (1) x 1,100 HP Rolls Royce TCNC 73/M-180, 4-Blade FPP
Propeller @ 1,800mm Dia.

Speed : 13 knots
Emergency Generators : One (1) x John Deere 175 kW, RadiatorCooled

Ships Service Generators :
Two (2) x C32 Caterpillar (CAT) DieselGenerators @ (910 KW) each.

Life Saving Equipment
Life Rafts : Four (4) x 25-Person Inflatable Life Rafts
Life Rafts : Two (2) x 10-Person Inflatable Life Rafts
Rescue Boat/Craft :
One (1) x Fast RSQ 450 A, 6 Person Cap.,40hp, 4.3m OAL,
USCG/SOLAS Appr. with Davit

Flow-Back Chemical
500bbl Approvals :
8 X 500bbl tanks (4,000 barrels) on vessel deck -
All (8) tanks are capable ofcarrying both hazardous and
pollutionmaterial. Flow-Back carriage requires USCG
approval of chemical prior to carriage.

Accomodations
29 Bunks - (8 x 2 Person, 3 x 4 Person, & 1 x1 Person)

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
280ft PSV for Sale
Platform Supply Vessel - 2009 Built - For Sale
OSV for Sale
PSV - 29 Bunks - For Sale
280FT Platform Supply Vessel - for Sale

-------------------------------------------------------------------------------------------------------
Available for selling

2009 Built Platform Supply Vessel - For Sale
Contact Us
ID 2796
Ingersoll Rand DM30 Drilling Rig for Sale
Worldoils Marketplace
Ingersoll Rand DM30 Drilling Rig for Sale

Worldrigs ID: WR2923

Ingersoll Rand DM30 Drilling Rig for Sale
Drilling Rig - Ingersoll Rand DM30  - For Sale


Model : : Ingersoll Rand DM30
Manufacturer : Ingersoll Rand
Year : Refurbished 2020
Condition : Used

Description :

Truck : Navistar international 7600.
Year of the truck : 2012.
Truck miles : 72.000 miles
Drilling Rig Hours reader : 7923 (5) x 1/10
Engine : Cummins KAT19 550 HP
Compressor : Simma Sullair mounted over truck 1050 CFM – 350 PSI.

Fully equipped Drilling Rig
The equipment is fully operating and under drilling contract right now
Aditionals included: FMC WaterPum, 2 heavy duty operational winch.
Additional not included: 120 meters of drilling rods 4 ½ api

Location : Santiago, Chile

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Ingersoll-Rand Drilling Rig for Sale
Ingersoll Rand DM30 Drilling Rig - 2020 Rebuilt
Used Ingersoll Rand DM30 Drilling Rig for Sale
Ingersoll-Rand Land Drilling Rig for Sale
DM30 Drilling Rig for Sale

-------------------------------------------------------------------------------------------------------
Available for selling

Ingersoll Rand DM30 Drilling Rig - For Sale
Contact Us
ID 2923
4500hp drawworks Available for selling

Drawworks For Offshore Drill Rigs or Drill Ships - New 4500hp for Sale
Contact Us
ID 120
280ft Offshore Supply Vessel
Worldoils Marketplace
280ft Offshore Supply Vessel

Worldrigs ID: WR2790

280ft Offshore Supply Vessel
2005 built PSV for Sale


Description :

General
Vessel Type : PSV - Platform Supply Vessel
Vessel Class : OSV - Offshore Supply Vessel
Year Built : 2005
Classification : ABS, USCG, SOLAS, MARPOL

Dimensions
Dimensions : 280 ft X 60 ft X 24 ft (85.34 m X 18.29 m X7.32 m)
Length Overall : 280 ft.
Draft (Lightship) : 7 ft. 3 in. (2.21 m)
Draft (Loadline) : 19.24 ft (5.87 m)
Clear Deck : 203 ft x 50.5 ft (61.89 m x 15.40 m)
Clear Deck : 10,251 sq. ft. (953 m2)
Deck Cargo Capacity : 2,700 LT (2,743.20 MT)
Deadweight Tonnage : 4,695.91 LT (4,771.27 MT)

Capacities
Fuel Oil : 288,732.20 gals. (1,092.97 m3)
Ballast : 303,141 gals. (1,147.51 m3)
Potable Water : 34,820 gals. (131.81 m3)
Dry Bulk : 11,440.10 cu. ft. @ 80 psi (324.2 m3 @ 5.5bars)
Liquid Mud : 15,413.80 barrels (2,450.60 m3)
Methanol : 1,843.66 barrels (293.12 m3)

Special Features

Tuggers : Two (2) x 4 Tons
Ship Motion : Two (2) Passive Type Anti-Roll Tanks
Ship Motion : Bilge Keels
Positioning : DP-2
Deck Crane : One (1) x 3,100 lb Capacity

Machinery
Main Engines : Two (2) CAT 3608 Diesels, 7,200 BHP
Bow Thrusters : One (1) 1,200 HP Rolls Royce Swing Up
Bow Thrusters : One (1) 1,700 HP Schottel
Stern Thrusters : One (1) 1,700 HP Schottel
Speed : 15 knots
Generators : Two (2) x 910 kW
Generators : One (1) x 170 kW emergency

Life Saving Equipment
Life Rafts : Two (4) x 25-Man Inflatable Life Rafts
Life Rafts : Two (1) x 10-Man Inflatable Life Rafts
Rescue Boat/Craft : One (1) x Sea Force 490 SOLAS Rescue Boat with davit
Other gear as required by authorities

Flow-Back Chemical
500bbl Approvals :
8 X 500bbl tanks (4,000 barrels) onvessel deck - All (8) tanks are
capable of carrying wither hazardous or pollution material.
Flow-Back carriage requires USCG approval of chemicals
prior to carriage.

Electronics
Electronics Package
JRC 75C Inmarsat-C, JRC JSB-196 GM SSB Radio Telephone,
JRC NCT-196N DSC/NBDP Modem, JRC NDZ-127C Data
Terminal, JRCJFE-585 Echo Sounder, JRC NWZ-4570 GPS
Navigator, JRC JLR-7700 MKII GPS Navigator, Mini Max CSI
Wireless DGPS,Furuno NX-300 Navtex, JRC NCR-330 Navtex
Receiver, Two (2) ICOM IC-M402 VHF Radios, Marine Technologies
Bridge Mate AIS Unit, Two (2) Furuno FM-8500 VHF Radio
Telephones, Havant Navitron Autopilot, Two(2) Young Wind
Trackers, Two (2) Meridian Gyro Compasses, Three (3) JRC
JHS-7 Handheld Emergency VHF, ACR RBL-32 406 EPIRB,
Two (2) JRC JQX-30A SART, Marine Technologies VSAT

Accommodations : 29

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
2005 built PSV for Sale
280FT OSV for Sale
Platform Supply Vessel for Sale
OSV - 2005 built - For Sale
PSV - 280ft - for Sale

-------------------------------------------------------------------------------------------------------
Available for selling

280ft Offshore Supply Vessel
Contact Us
ID 2790
280ft Platform Supply Vessel for sale
Worldoils Marketplace
280ft Platform Supply Vessel for sale

Worldrigs ID: WR2791

280ft Platform Supply Vessel for sale
2009 built OSV for Sale


Description :

General
Vessel Type : PSV - Platform Supply Vessel
Vessel Class : OSV - Offshore Supply Vessel
Year Built : 2009
Classification : ABS, USCG, SOLAS, MARPOL

Capacities
Fuel Oil (Ship/Cargo) :
375,993 Gallons (1,423.3m3)
(NOTE: Cargofuel during sub-chapter L operations)

Ballast : 310,257 Gallons (1,174.5 m3)
Drill Water : 90,430.4 Gallons (342.3 m3)
Potable Water : 41,335 Gallons (156.5 m3)
Dry Bulk : 12,000 ft3 @ 80 psig (339.8 m3 @ 5.5 bars)
Liquid Mud : 13,322 Barrels (2,118 m3)

Special Features
Tuggers : Two (2) x 12,000 Lbs. Line Pull, Tulsa Winch1241W-81157
Ship Motion : Two (2) x Passive Type Anti-Roll Tanks
Ship Motion : Bilge Keels
Positioning : DPS - 2

Deck Crane : One (1) x 3.0 LT SWL, 30ft Fixed Boom,
(MCF-530 North Pacific Crane)

Firefighting : Two (2) x 5,283 GPM (1,200 m3/hr)  Fire Monitors,
Jason Eureka  (MM602HD-C-01)

Firefighting : Two (2) x 7,705 GPM (1,750 m3/hr) @ 459TDH
(Fire Monitor Pumps), Jason EurekaOGF-250x350

Machinery
Main Engines : Two (2) x C-280-8 Caterpillar (CAT)
Diesel Engines @ 3,299 HP Each

Bow Thrusters : One (1) x Brunvoll FU80 1,050 KW @ 1,190RPM,
4-Blade FPP Propeller @ 2,000mm Dia.

Stern Thrusters : One (1) x Brunvoll FU80 1,050 KW @ 1,190RPM,
4-Blade FPP Propeller @ 2,000mm Dia.

Swing Down Combination Thruster : One (1) x 1,100 HP Rolls Royce
TCNC 73/M-180, 4-Blade FPP Propeller @ 1,800mm Dia.

Speed : 13 knots
Propellers : Two (2) x Schottel SCP 077-1 XG 2,700mm Diameter (CPP)
Emergency Generators : One (1) x John Deere 175 kW, Radiator Cooled

Ships Service Generators : Two (2) x C32 Caterpillar (CAT)
Diesel Generators @ (910 KW) each.

Shaft Generators : Two (2) x 2mW, 3PH, 0.8 Power Factor,
Kato 4P6.6-2975

Life Saving Equipment
Life Rafts : Four (4) x 25-Person Inflatable Life Rafts
Life Rafts : One (1) x 10-Person Inflatable Life Raft
Rescue Boat/Craft : One (1) x Fast RSQ 450 A, 6 Person Cap.,
40hp, 4.3m OAL, USCG/SOLAS Appr. with Davit

Flow-Back / Chemical
Flowback Approvals : 8 X 500bbl tanks (4,000 barrels) onvessel deck -
All (8) tanks are capable ofcarrying both hazardous and pollutionmaterial.
Flow-Back carriage requires USCG approval of chemical prior to carriage.
Flowback Approvals : Two (2) x On-Deck Flow-Back/Chemical Carriage
Tanks (7,100 Barrels Total Capacity Both Tanks)

Accommodations
Accommodations : 29 Bunks - (8 x 2 Person, 3 x 4 Person, & 1 x1 Person)

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
2009 built OSV for Sale
PSV - 280ft - For Sale
Offshore Supply Vessel for Sale
OSV - 29 bunks - For Sale
Platform Supply Vessel for Sale

-------------------------------------------------------------------------------------------------------
Available for selling

OSV - 29 bunks - For Sale
Contact Us
ID 2791
280ft Platform Supply Vessel for sale
Worldoils Marketplace
280ft Platform Supply Vessel for sale

Worldrigs ID: WR2792

280ft Platform Supply Vessel for Sale
PSV - Converted in 2019 - For Sale


Description :

General
Vessel Type : PSV - Platform Supply Vessel
Vessel Class : OSV - Offshore Supply Vessel
Year Built : 2008
Year Converted/Modified : 2019
Classification : ABS, USCG, SOLAS, MARPOL

Dimensions
Dimensions : 280 ft x 60 ft x 24 ft (85.34m x 18.29m x 7.32m)
Length Overall : 280 ft.
Draft (Lightship) : 7 ft. 3 in. (2.21 m)
Draft (Loadline) : 19.24 ft (5.87 m
Clear Deck : 225 ft x 50.5 ft (68.58 m x 15.40 m)
Cargo Deck Area : 11,363 sq. ft. (1,056 sq. m)
Deck Cargo Capacity : 2,700 LT (2,743.20 MT) @ 3ft VCG
Deadweight Tonnage : 4,748.2 LT (4,824.4 MT)

Capacities
Fuel Oil : 375,994.6 gals. (1,423.29 m3)
Ballast : 326,404 gals. (1,235.6 cu. m)
Potable Water : 34,820 gallons (158.0 cu. m)
Dry Bulk : 11,300 ft3 @ 80 psi (320 m3 @ 5.5 bars)
Liquid Mud : 13,460 barrels (2,026.4 cu. m)

Special Features
Tuggers : Two (2) x 12,000 lbs (6 Tons) each Line Pull
Ship Motion : Two (2) Passive Type Anti-Roll Tanks
Ship Motion : Bilge Keels
Positioning : DPS-2

Deck Crane : One (1) x 3.0 LT SWL, 30ft Fixed Boom,
(MCF-530 North Pacific Crane)

Machinery
Main Engines : Two (2) x Caterpillar C280-8 3,299 HP each Diesel Engines
Bow Thrusters : One (1) x Brunvoll FU-80 1,350 kw Electric Drive Tunnel Thruster
Stern Thrusters : One (1) x Brunvoll FU-80 1,350 kw Electric Drive Tunnel Thruster
Swing Down Combination Thruster : One (1) x Ulstein 1,100 HP Combination Thruster
Speed : 13 knots
Emergency Generators : One (1) x 175 kw Radiator Cooled
Ships Service Generators : Two (2) x CAT C32 910kw each

Life Saving Equipment
Life Rafts : Two (4) x 25-Man Inflatable Life Rafts
Life Rafts : Two (1) x 10-Man Inflatable Life Rafts
Rescue Boat/Craft : One (1) x Narwhal 6 Person Capacity

Other gear as required by authorities

Flow-Back / Chemical
500bbl Approvals :
10 x 500bbl Tanks (5,000 barrels) on vessel deck - (8 Tanks are capable of
carrying hazardous material (8x 500bbl =4,000 barrels), All 10 tanks are
capable of carrying pollution material, Flow-Back carriage requires
USCG approval of chemicals prior tocarriage)

Electronics
Electronics Package :
JRC 75C Inmarsat-C, JRC JSB-196 GM SSB Radio Telephone,
JRC NCT-196N DSC/NBDP Modem, JRC NDZ-127C Data Terminal,
JRCJFE-585 Echo Sounder, JRC NWZ-4570 GPS Navigator,
JRC JLR-7700 MKII GPS Navigator, Mini Max CSI Wireless DGPS,
JRCNCR-330 Navtex Receiver, Two (2) ICOM IC-M402 VHF Radios,
Marine Technologies Bridge Mate AIS Unit, Two (2) Furuno FM-8500 VHF
Radio Telephones, Havant Navitron Autopilot, Three (3) Young Wind Trackers,
Three (3) Meridian Gyro Compasses, Three (3) JRC JHS-7 Handheld
Emergency VHF,ACR RBL-32 406 EPIRB, Two (2) JRC JQX30A SART,
Marine Technologies Dynamic Positioning System, Marine
Technologies Radio Marine 90 cm VSAT

Accommodations : 29 Bunks

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
2008 Built Platform Supply Vessel
ABS Class PSV for Sale
2019 Modified Platform Supply Vessel for Sale
PSV - 2008 Built - For Sale
29 Bunks PSV for Sale
Offshore Supply Vessel for Sale
OSV - 280FT - For Sale

-------------------------------------------------------------------------------------------------------
Available for selling

2019 Modified 280FT Platform Supply Vessel for Sale
Contact Us
ID 2792
280ft OSV for Sale
Worldoils Marketplace
280ft OSV for Sale

Worldrigs ID: WR2793

280ft OSV for Sale
Offshore Supply Vessel for Sale

Description :

General
Vessel Type : PSV - Platform Supply Vessel
Vessel Class : OSV - Offshore Supply Vessel
Year Built : 2010
Classification : ABS, USCG, SOLAS, MARPOL

Dimensions
Dimensions : 280 ft x 60 ft x 24 ft (85.34m x 18.29m x7.32m)
Length Overall : 280 ft.
Draft (Lightship) : 7 ft. 3 in.  (2.21 m)
Draft (Loadline) : 19.44 ft (5.87m)
Clear Deck : 201 ft x 50.5 ft (61.27m x 15.40m)
Cargo Deck Area : 10,151 ft2. (943 m2)
Deck Cargo Capacity : 2,525 LT (2,565.5 MT) @ 3ft VCG Above Main Deck
Deadweight Tonnage : 4,750 LT (4,826 MT)

Capacities
Fuel Oil : (Ship/Cargo)375,993 Gallons (1,423.3 m3)
(NOTE: Cargo fuel during sub-chapter L operations)

Ballast : 310,257 Gallons (1,174.5 m3)
Drill Water : 90,430.4 Gallons (342.3 m3)
Potable Water : 41,335 Gallons (156.5 m3)
Dry Bulk : 12,000 ft3 @ 80 psig (339.8 m3 @ 5.5 bars)
Liquid Mud : 13,322 Barrels (2,118 m3)

Special Features
Tuggers : Two (2) x 12,000 Lbs. Line Pull, Tulsa Winch 1241W-81157
Ship Motion : Two (2) x Passive Type Anti-Roll Tanks
Ship Motion : Bilge Keels
Positioning : DPS - 2

Deck Crane : One (1) x 3.0 LT SWL, 30ft Fixed Boom,
(MCF-530 North Pacific Crane)

Firefighting : Two (2) x 5,283 GPM (1,200 m3/hr)  
Fire Monitors, Jason Eureka  (MM602HD-C-01)

Firefighting : Two (2) x 7,705 GPM (1,750 m3/hr) @ 459TDH
(Fire Monitor Pumps), Jason Eureka OGF-250x350

Machinery
Main Engines : Two (2) CAT C280-8 Diesels, 7,200 BHP
Bow Thrusters : One (1) 1,200 HP Rolls Royce Swing Up
Bow Thrusters : One (1) Brunvoll FU80 LTC 2000 (Electric Driven 1,250 kW)
Stern Thrusters : One (1) Brunvoll FU80 LTC 2000 (Electric Driven 1,250 kW)
Speed : 13 knots
Generators : Two (2) x 910 kW
Generators : One (1) x 175 kW Emergency

Life Saving Equipment
Life Rafts : Four (4) x 25-Man Inflatable Life Rafts
Life Rafts : Two (2) x 10-Man Inflatable Life Raft
Rescue Boat/Craft : One (1) x Fast RSQ 450A Rescue Boat with davit
Other gear as required by authorities

Flow-Back/Chemical
500bbl Approvals :
8 X 500bbl tanks (4,000 barrels) onvessel deck - All (8) tanks are capable of
carrying both hazardous and pollution material. Flow-Back carriage
requires USCG approval of chemical prior to carriage.

Electronics
Electronic Package :
Felcom 15 LRIT Inmarsat-C, JRC JSB-196GM SSB Radio Telephone,
JRC NCT-196NDSC/NBDP Modem, JRC NDZ-127C DataTerminal,
JRC JFE-585 Echo Sounder, JRCNWZ-4570 GPS Navigator,
JRC JLR-7700MKII GPS Navigator, Two (2) Mini Max CSI
Wireless DGPS, Furuno NX-300 Navtex, JRCNCR-330 Navtex
Receiver, Two (2) ICOM IC-M402 VHF Radios, Marine Technologies
Bridge Mate AIS Unit, Two (2) Furuno FM-8500 VHF Radio Telephones,
Havant Navitron Autopilot, Three (3) Young Wind Trackers,Three (3)
Meridian Gyro Compasses, Three(3) ICOM gM1600 Handheld
Emergency VHF,ACR RBL-32 406 EPIRB, Two (2) JRC JQX30A SART,
VSAT System, CyScan, RadaScan, Two (2) VRU, Marine Technologies
Dynamic Positioning System(DP 2)

Accommodation : 29

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Offshore Supply Vessel for Sale
2010 Built Offshore Supply Vessel - For Sale
OSV - 29 bunks - for Sale
PSV - 280ft - for Sale
2010 built Platform Supply Vessel for Sale

-------------------------------------------------------------------------------------------------------
Available for selling

2010 Built Offshore Supply Vessel - For Sale
Contact Us
ID 2793
Drilling Rig - Simco 2400 SK - For Sale
Worldoils Marketplace
Drilling Rig - Simco 2400 SK - For Sale

Worldrigs ID: WR1130

Simco 2400 SK-Drilling Rig for Sale
Drilling Rig - Simco 2400 SK - For Sale


Model : 2400 SK Drill Rig
Manufacturer : Simco
Condition : Used

Description :

Simco 2400 SK-Drill Rig
Torque 2400 ft/lbs
0 to 185 rmps
Can pull 7600 lbs & push 7600 lbs
1800 lbs winch lift
Net stroke 74'
Using conventional auger
rated to bore a 10" diameter hole 0-100ft deep
rated for a hollow auger can go up to 60ft  deep at 3 1/4" to 4 1/4" diameter
and 0-25ft  with a 6 1/4" diameter
rated core drill it can go 250ft  AWX and 150ft  NWX
The drill was mainly used for finding water main leaks,
and has received regular maintenance
Can be Mounted on a 1995 Ford F-450 Truck

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Simco 2400 SK Used Drilling Rig for Sale
Used Simco 2400 SK-Drilling Rig for Sale
Simco 2400 SK Land Drilling Rig for Sale
Simco Used Drilling Rig for Sale in USA
Simco 2400 SK Drilling Rig for Sale in USA

-------------------------------------------------------------------------------------------------------

Available for selling

Simco 2400 SK-Drilling Rig - For Sale
Contact Us
ID 1130
195 ft Long Work Barge for sale
Worldoils Marketplace
195 ft Long Work Barge for sale

Worldrigs ID: WR2786

195 ft Long Work Barge for Sale
Work Barge for Sale

Specifications
Dimensions
195ft x 40ft x 10ft

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
195 ft Long Work Barge for Sale
Work Barge for Sale
Used Work Barge - 195ft Long - For Sale
40ft Breadth Work Barge for Sale
Barge for Sale

-------------------------------------------------------------------------------------------------------

Available for selling

195ft Long Work Barge for sale
Contact Us
ID 2786
330 FT Platform Supply Vessel
Worldoils Marketplace
330 FT Platform Supply Vessel

Worldrigs ID: WR2787

330 FT Platform Supply Vessel
2013 Built Offshore Supply Vessel for Sale


Description :

General
Vessel Type : PSV - Platform Supply Vessel
Vessel Class : OSV - Offshore Supply Vessel
Year Built : 2013
Classification : ABS, USCG, SOLAS, MARPOL

Dimensions
Dimensions : 300 ft x 60 ft x 24 ft (91.4m X 18.30m X 7.3m)
Length Overall : 300 ft.
Draft (Lightship) : 7 ft. 3 in.  (2.21m)
Draft (Loadline) : 19.01 ft. (5.79m)
Clear Deck : 222 ft x 50.5 ft (67.67m x 15.40m)
Clear Deck Area : 11,211 ft2 (1,042 m2)
Deck Strength : 1,200 lb/ft2 (5,858 kg/m2)
Deck Cargo Capacity : 2,800 LT (2,845 MT)
Deadweight Tonnage : 4,856 LT (4,933 MT)

Capacities
Fuel Oil (Ship/Cargo) :
151,622 Gallons (573.95 m3) (NOTE: Cargofuel
during sub-chapter L operations)

Rigs Fuel Oil : 261,613 Gallons (990.31 m3)
Ballast/Rig Water : 264,172 Gallons (1,000 m3)
Rig Water : 60,528 Gallons (229.2 m3)
Potable Water : 34,826.1 Gallons (131.83 m3)
Dry Bulk : 12,000 ft3 @ 80 psig (339.8 m3 @ 5.5 bars)
Liquid Mud : 14,511.6 Barrels (2,307.16 m3)
Methanol : 1,766.1 Barrels (280.79 m3)

Fuel Consumption
Reduced Frequency Conversion :
Engines / Generators operating at reduced variable frequency
speeds to suit loads during DP operations, decreasing fuel
consumptionand reducing fuel emissions.

Special Features
Ship Motion : Two (2) x Passive Type Anti-Roll Tanks
Ship Motion : Bilge Keels
Positioning : DPS-2
Steering and Controls : Two (2) x High-Lift Type Rudders

Deck Crane :
One (1) x 3.0 LT SWL, 30ft Fixed Boom, (MCF-530 North Pacific Crane)

Firefighting :
Two (2) x 1,200 m3/hr (5,283 GPM) Monitors,with Water Spray System

Firefighting :
Two (2) x 7,705 GPM (1,750 m3/hr) @ 459TDH (Fire Monitor Pumps),
Jason Eureka OGF-250x350

Machinery
Main Engines :
Two (2) x C-280-8 Caterpillar (CAT) Diesel Engines @ 3,299 HP Each

Bow Thrusters :
Two (2) x Brunvoll FU80 Tunnels (1,050 kW),4-Blades FPP
Propeller @ 2,000mm Dia.,VFD Electric Drive

Stern Thrusters :
Two (2) x Brunvoll FU63 LTC 1550 Tunnels,800 kw (each),
4-Blade CPP Propeller @1,550mm Dia.

Speed13 knots

Emergency Generators :
One (1) x 175 kw John Deere 6081AFM75,Radiator Cooled

Ships Service GeneratorsTwo (2) x C32 Caterpillar (CAT)
Diesel Generators @ (910 KW) each.

Life Saving Equipment
Life Rafts : Four (4) x 25-Person Inflatable Life Rafts
Life Rafts :Two (2) x 10-Person Inflatable Life Rafts

Rescue Boat/Craft :
One (1) x Fast RSQ 450 A, 6 Person Cap.,40hp,
4.3m OAL, USCG/SOLAS Appr. with Davit

Flow-Back / Chemical
Flowback Approvals10 x 500bbl Tanks (5,000 barrels)
On vessels deck - (4 Tanks are capable of carrying hazardous
 material (4x500bbl =2,000 barrels), All 10 tanks are capable of
carrying pollution material, Flow-Back carriage requires USCG
approval of chemicals prior to carriage)

Accommodations
29 Bunks - (8 x 2 Person, 3 x 4 Person, & 1 x1 Person)

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
2013 Built PSV for Sale
OSV - 300 FT - For Sale
Platform Supply Vessel - 29 Bunks - For Sale
OSV - 2013 Built - for Sale
330 FT Platform Supply Vessel for Sale

-------------------------------------------------------------------------------------------------------
Available for selling

300 FT Platform Supply Vessel for Sale
Contact Us
ID 2787
280ft Platform Supply Vessel for Sale
Worldoils Marketplace
280ft Platform Supply Vessel for Sale

Worldrigs ID: WR2788

280ft Platform Supply Vessel for Sale
Used PSV for Sale


Description :

General
Vessel Type : PSV - Platform Supply Vessel
Vessel Class : OSV - Offshore Supply Vessel
Year Built : 2008
Classification : ABS, USCG, SOLAS, MARPOL

Dimensions
Dimensions : 280ft X 60ft X 24ft (85.34 m X 18.29 m X 7.32m)
Draft (Lightship) : 7 ft 3 in (2.21 m)
Draft (Loadline) : 19.24ft (5.87 m)
Clear Deck : 201ft x 50.5ft (61.27 m x 15.40 m)
Cargo Deck Area : 10,151 sq. ft. (943 m2)
Deck Cargo Capacity : 2,700 LT (2,743.20 MT)
Deadweight Tonnage : 4,720.57 LT (4,797.68 MT)

Capacities
Fuel Oil : 263,104 gals. (995.96 cu. m)
Ballast : 311,870 gals. (1,180.56 cu. m)
Drill Water : 105,414 gals. (399.04 cu. m)
Potable Water : 34,824 gallons (131.82 cu. m)
Dry Bulk : 11,442.4 cu. ft. @ 80 psi (324.01 m3 @ 5.5bars)
Liquid Mud : 13,332 barrels (2,119.6 cu. m)
Methanol : 1,534.6 barrels (243.98 m3)

Special Features
Tuggers : Two (2) x 4 Tons
Ship Motion : Two (2) Passive Type Anti-Roll Tanks,
Ship Motion : Bilge Keels
Positioning : DP-2
Deck Crane : One (1) x 3,100 lb Capacity
Firefighting : Two (2) x 8,000 GPM Fire Monitors

Machinery
Main Engines : Two (2) CAT C280-8 Diesels, 7,200 BHP
Bow Thrusters : Two (2) Brunvoll FU80 LTC 2000 (Electric Driven 1,250 kW)
Stern Thrusters : One (1) Brunvoll FU80 LTC 2000
Speed : 13 knots
Generators : Two (2) x 910 kW One (1) x 166 kW emergency

Life Saving Equipment
Life Rafts : Four (4) x 25-Man Inflatable Life Rafts
Life Rafts : One (1) x 10-Man Inflatable Life Rafts
Rescue Boat/Craft : One (1) x RSQ 450A SOLAS Rescue Boat with davit

Other gear as required by authorities

Flow-Back / Chemical
500bbl Approvals :
8 X 500bbl tanks (4,000 Barrels) Onvessel Deck - All (8) tanks are capable of
carrying both hazardous and pollution material. Flow-Back carriage requires
USCG approval of chemical prior to carriage.

Electronics
Electronics Package :
JRC 75C Inmarsat-C, JRC JSB-196 GM SSB Radio Telephone,
JRC NCT-196N DSC/NBDP Modem, JRC NDZ-127C
Data Terminal, JRCJFE-585 Echo Sounder,
Two (2) C-Nav 3050DGPS, Mini Max CSI Wireless DGPS,
Furuno NCR333 Navtex, JRC NCR-330 Navtex Receiver,
Two (2) ICOM IC-M402 VHF Radios, Marine Technologies
Bridge Mate AIS Unit, Two (2) Furuno FM-8500 VHF Radio
Telephones, Havant Navitron Autopilot, Three(3) Young Wind
Trackers, Three (3) Meridian Gyro Compasses, Three (3)
JRC JHS-7 Handheld Emergency VHF, ACR RBL-32 406EPIRB,
Two (2) JRC JQX 30A SART, MarineTechnologies Dynamic
Positioning System (DP 2)

Accommodations : 29

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
29 Bunks PSV for sale
OSV - 280FT - For Sale
2008 built Platform Supply Vessel for sale
Offshore Supply Vessel for Sale
OSV for Sale

PSV - 2008 Built - For Sale
ABS Class PSV for Sale

-------------------------------------------------------------------------------------------------------
Available for selling

2008 built Platform Supply Vessel for sale
Contact Us
ID 2788
280ft Platform Supply Vessel for Sale
Worldoils Marketplace
280ft Platform Supply Vessel for Sale

Worldrigs ID: WR2789

280ft Platform Supply Vessel for Sale
Used PSV for Sale


Description :

General
Vessel Type : PSV - Platform Supply Vessel
Vessel Class : OSV - Offshore Supply Vessel
Year Built : 2009
Classification : ABS, USCG, SOLAS, MARPOL

Dimensions
Dimensions : 280 ft x 60 ft x 24 ft (85.34m x 18.29m x7.32m)
Length Overall : 280 ft.Draft (Lightship)7 ft. 3 in.  (2.21 m)
Draft (Loadline) : 19.44 ft (5.87m)
Clear Deck : 201 ft x 50.5 ft (61.27m x 15.40m)
Cargo Deck Area : 10,151 ft2. (943 m2)
Deck Strength : 1,200 lb/ft2 (5,858 kg/m2)
Deck Cargo Capacity : 2,600 LT (2,641.7 MT) @ 3ft VGD Above MainDeck
Deadweight Tonnage : 4,734.69 LT (4,812.03 MT)

Capacities
Fuel Oil (Ship/Cargo) :
375,994.6 Gallons (1,423.29 m3)
(NOTE:Cargo fuel during sub-chapter L operations only)

Ballast : 304,253.8 Gallons (1,151.73 m3)
Drill Water : 90,430.3 Gallons (342.32 m3)
Potable Water : 41,335 Gallons (156.5 m3)
Dry Bulk : 11,442.4 ft3 @ 80 psig (324.01 m3 @ 5.5bars)
Liquid Mud : 13,322 Barrels (2,118 m3)

Special Features
Tuggers : Two (2) x 12,000 Lbs. Line Pull, Tulsa Winch1241W-81157
Ship Motion : Two (2) x Passive Type Anti-Roll Tanks
Ship Motion : Bilge Keels
Positioning : DPS - 2
Steering and Controls : Two (2) x High-Lift Type Rudders

Deck Crane :
One (1) x 3.0 LT SWL, 30ft Fixed Boom,
(MCF-530 North Pacific Crane)

Firefighting :
Two (2) x 5,283 GPM (1,200 m3/hr)  FireMonitors,
Jason Eureka (MM602HD-C-01)

Firefighting :
Two (2) x 7,705 GPM (1,750 m3/hr) @ 459TDH
(Fire Monitor Pumps), Jason Eureka OGF-250x350

Machinery
Main Engines : Two (2) x C-280-8 Caterpillar (CAT) Diesel
Engines @ 3,299 HP Each

Bow Thrusters :
One (1) x 1,350 kw, Ulstein TT2200-DPN-CPTunnel Thruster,
4-Blade CPP Propeller @2,200mm Dia., Electric Drive

Stern Thrusters :
One (1) x 1,350 kw, Ulstein TT2200-DPN-CP Tunnel Thruster,
4-Blade CPP Propeller @2,200mm Dia., Electric Drive

Swing Down Combination Thruster : One (1) x 1,100 HP Rolls
Royce TCNC 73/M-180, 4-Blade FPP Propeller @ 1,800mm Dia.

Speed : 13 knots

Emergency Generators : One (1) x John Deere 175 kW, RadiatorCooled

Ships Service Generators : Two (2) x C32 Caterpillar (CAT) Diesel
Generators @ (910 KW) each

Life Saving Equipment
Life Rafts : Four (4) x 25-Person Inflatable Life Rafts
Life Rafts : Two (2) x 10 Person Inflatable Life Rafts

Rescue Boat/Craft : One (1) x Fast RSQ 450 A, 6 Person Cap.,
40hp, 4.3m OAL, USCG/SOLAS Appr. with Davit

Flow-Back/Chemical
500bbl Approvals :
6 x 500bbl tanks (3,000 barrels) on vessel deck - (4) Tanks are
capable of carrying hazardous material (4 x 500bbls =2,000 barrels),
All (6) tanks are capable of carrying pollution material. Flow back
carriage requires USCG approval of chemicals prior to carriage.

Accommodations
29 Bunks - (8 x 2 Person, 3 x 4 Person, & 1 x1 Person)

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
2009 built Platform Supply Vessel
Offshore Supply Vessel for Sale
OSV - 280FT - For Sale
ABS Class PSV for Sale
OSV for Sale
PSV - 2009 Built - For Sale
29 Bunks PSV for Sale
------------------------------------------------------------------------------------------------------
Available for selling

2009 built Platform Supply Vessel for sale
Contact Us
ID 2789
280ft Offshore Supply Vessel for sale
Worldoils Marketplace
280ft Offshore Supply Vessel for sale

Worldrigs ID: WR2784

280ft Offshore Supply Vessel for sale
Used OSV for sale

Description :

General
Vessel Type : Offshore Supply Vessel
Year Built : 2007
Classification : ABS, USCG, SOLAS, MARPOL

Dimensions
Dimensions : 280 ft X 60 ft X 24 ft. (85.34 m X 18.29 m X7.32 m)
Draft (Lightship) : 7 ft. 3 in. (2.21 m)
Draft (Loadline) : 19.24 ft. (5.87 m)
Clear Deck : 203 ft. x 50.5 ft. (61.89 m x 15.40 m)
Cargo Deck Area : 10,251 sq. ft. (953 sq. m)
Deck Cargo Capacity : 2,700 LT (2,743.20 MT)
Deadweight Tonnage : 4,870.12 LT (4,948.04 MT)

Capacities
Fuel Oil : 348,617 gals. (1,319.66 cu. m)
Ballast : 374,186 gals. (1,416.45 cu. m)
Potable Water : 34,816 gals. (131.79 cu. m)
Dry Bulk : 11,455 cu. ft. @ 80 psi (324.37 cu. m @ 5.5bars)
Liquid Mud : 15,441.2 barrels (2,454.95 cu. m)

Machinery

Main Engines : Two (2) CAT C280-8 Diesels, 7,200 BHP
Main Propulsion : Two (2) Schottel CP Wheels
Bow Thrusters : One (1) 1,150 HP Rolls Royce Swing Up
Bow Thrusters : One (1) Brunvoll FU80 LTC 2000
Stern Thrusters : One (1) Brunvoll FU80 LTC 2000
Speed : 13 knots
Generators : Two (2) x 910 kW
Generators : One (1) x 175 kW emergency

Special Features
Tuggers : Two (2) x 4 Tons
Ship Motion : Two (2) Passive Type Anti-Roll Tanks
Ship Motion : Bilge Keels
Positioning : DP 2
Deck Crane : One (1) x 3,100 lbs. capacity

Life Saving Equipment
Life Rafts : Four (4) x 25-Man Inflatable Life Rafts
Life Rafts : One (1) x 10-Man Inflatable Life Raft
Rescue Boat/Craft : One (1) x Narwhal SV 400 SOLAS Rescue Boat with davit

Other gear as required by authorities

MSRC Equipment

Weedo 910 Tug and Macgregor Davit System,Sea Sentry Oil Boom Hydraulic
Reel, Rutter Sigma S6 Spill Detection and (not on boardbut equipped for)
Lamor Offshore Skimmer Unit LOS 350/140

Electronics
JRC JUE-85 Inmarsat-C, JRC JSB-196 GM
SSB Radio Telephone, JRC NCT-196NDSC/NBDP Modem,
JRC NDZ-127J Data Terminal, JRC JFE-585 Echo Sounder,
JRCNWZ-4570 GPS Navigator, JRC JLR-7700MKII GPS Navigator,
C-Nav1000 R4 Navigation System, JRC NCR-333 Navtex Receiver,
Two (2) ICOM IC-M422 VHF Radios, ACR Navicast AIS Unit,
Two (2) Furuno FM-8800D/8800S VHF Radio Telephones,
Havant Navitron NT88G Autopilot, Three (3) Young Wind
Trackers,Three (3) Bridge Mate Meridian Gyro Compasses,
Three (3) ICOM Handheld Emergency VHF, ACR RBL-32 406
EPIRB,Two (2) ACR SART, JRC JLN 205 Doppler Log,
Two (2) JRC Radars, Two (2) DGPS,VSAT System, CyScan,
Two (2) MRU, Marine Technologies Dynamic Positioning System,
Two (2) JMX-444D VHF Radios, Two (2) Icom IC-M72 Handheld
VHF Radios, Motorola XPR4550 Radio, Two (2) Ventis MX4
Multi-gasDetector

Accommodations : 29

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
280ft Offshore Supply Vessel for sale
Used OSV for sale
2007 built Offshore Supply Vessel
OSV - 280FT - For Sale
ABS Class OSV for Sale

----------------------------------------------------------------------------------------------------------
Available for selling

280ft Offshore Supply Vessel for Sale
Contact Us
ID 2784
300FT Platform Supply Vessel for Sale
Worldoils Marketplace
300FT Platform Supply Vessel for Sale

Worldrigs ID: WR2785

300FT Platform Supply Vessel for Sale
Offshore Supply Vessel - 2003 Built - For Sale


Description :

General
Vessel Type : PSV - Platform Supply Vessel
Vessel Class : OSV - Offshore Supply Vessel
Year Built : 2003
Classification : ABS, SOLAS, MARPOL

Dimensions
Dimensions : 300 ft. X 60 ft. X 24 ft. (91.44 m X 18.29 m X7.32 m)
Length Overall : 300 ft.Draft (Lightship)7 ft. 6 in. (2.29 m)
Draft (Loadline) : 19 ft. 6 in. (5.87 m)
Clear Deck : 223 ft. x 50 ft. 7 in. (67.97 m x 15.42 m)
Cargo Deck Area : 11,280 sq. ft. (1,047.95 sq. m)
Deck Strength : 1,200 lb/sq. ft. (5,615.88 kg/sq. m)
Deadweight Tonnage : 5,004.71 LT (5,084.79 MT)

Capacities
Fuel Oil : 272,983 gals. (1033.35 cu. m)
Ballast : 321,265.2 gals. (1216.12 cu. m)
Potable Water : 32,998 gals. (124.9 cu. m)
Dry Bulk : 11,440 cu. ft. @ 80 psi (323.94 cu. m @ 5.5 bars)
Liquid Mud : 15,643.6 Barrels (2,487 m3)
Recovered Oil : 12,349.2 Barrels (1,963.4 m3) (Note: Carriedin Liquid Mud Tanks)
Service Tanks : Eleven (11) x 13,481.4 gallons (51.03 cu. m)
Methanol : 1,836.2 barrels (292 cu.m)

Special Features
Ship Motion : Two (2) Passive Type Anti-Roll Tanks
Ship Motion : Bilge Keels
Positioning : DP 2
Deck Crane : One (1) x 3,100 lbs. capacity

Machinery
Main Engines : Two (2) 3608 CAT Diesels, 6,600 BHP
Bow Thrusters : One (1) 1,100 HP Swing Up
Bow Thrusters : One (1) 1,300 HP Tunnel
Stern Thrusters : One (1) 1,300 HP Tunnel
Speed : 12 knots
Generators : Two (2) x 910 kW, One (1) x 190 kW emergency

Life Saving Equipment
Life Rafts : Two (2) x 25-Man Inflatable Life Rafts
Life Rafts : Two (2) x 10-Man Inflatable Life Rafts
Life Rafts : Two (2) x 20-Man Inflatable Life Rafts
Rescue Boat/Craft : One (1) x Sea Force 490 SOLAS O/B Rescue Boat
Other gear as required by authorities

Flow-Back / Chemical
500bbl Approvals :
8 x 500bbl tanks (4,000 barrels) on vessel deck - (4) tanks are capable of
carrying hazardous material (4x500bbl =2,000 barrels), All (8) tanks are
capable of carrying pollution material. Flow-Back carriage requires USCG
approvals of chemicals prior to carriage.

Accommodation : 29

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
300FT Platform Supply Vessel for Sale
Offshore Supply Vessel - 2003 Built - For Sale
2003 Built PSV for Sale
OSV - 300FT - For Sale
Platform Supply Vessel for Sale
Offshore Supply Vessel - 300ft - for sale
-------------------------------------------------------------------------------------------------------
Available for selling

Platform Supply Vessel for Sale
Contact Us
ID 2785
Davey Rouselle M8A Drilling  Rig for Sale
Worldoils Marketplace
Davey Rouselle M8A Drilling  Rig for Sale

Worldrigs ID: WR2781

Davey Rouselle M8A Drilling  Rig for Sale
Drilling  Rig - Davey Rouselle M8A - For Sale


Model : Rouselle M8A Drill Rig
Manufacturer : Davey
Condition : Used

Description :

Davey Rouselle M8A Drill Rig
Mounted on a 1991 Sterling truck
CAT 3306 Diesel Engine
8 speed transmission
Davey 500 cfm / 125 psi piston compressor (also plumbed for auxiliary air)
Included with 100 ft of Davey rods and a changeover sub to 3.5" API threads for bit

Note: Since 2018 the drill has had the air compressor "gone through", has had
the table replaced, Ramsey pulldown winch replaced, chain cases replaced,
table transmission rebuilt, new radiator for deck engine, and various other
small repairs done
Drill motor is getting weak and will need rebuilt and can be done here if needed
and the price would reflect that
Truck Runs fine but 4th gear does jump out

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Used Davey Rouselle M8A Drilling  Rig for Sale
Davey Rouselle  Drilling  Rig for Sale
Davey Land Drilling  Rig for Sale
Davey Rouselle M8A Drilling  Rig for Sale in USA
Davey Rouselle M8A Used Drilling  Rig for Sale

-------------------------------------------------------------------------------------------------------
Available for selling

Davey Rouselle M8A Drilling Rig - For Sale
Contact Us
ID 2781
Platform Supply Vessel - 2007 Built - For Sale
Worldoils Marketplace
Platform Supply Vessel - 2007 Built - For Sale

Worldrigs ID: WR2782

280ft Offshore Supply Vessel for Sale
Platform Supply Vessel - 2007 Built - For Sale


Description :

General
Vessel Type : PSV - Platform Supply Vessel
Vessel Class : OSV - Offshore Supply Vessel
Year Built : 2007
Year Converted/Modified : 2016
Classification : ABS, USCG, SOLAS, MARPOL

Dimensions
Dimensions : 280 ft X 60 ft X 24 ft (85.34 m X 18.29 m X7.32 m)
Length Overall : 280 ft.Draft (Lightship)7 ft. 3 in. (2.21 m)
Draft (Loadline) : 19.24 ft (5.87 m)
Clear Deck : 201 ft x 50.5 ft (61.27 m x 15.40 m)
Cargo Deck Area : 10,151 sq. ft. (943 sq. m)
Deck Cargo Capacity : 2,700 LT (2,743.20 MT)
Deadweight Tonnage : 4,695.91 LT (4,771.27 MT)

Capacities
Fuel Oil : 334,527 gals. (1,266.3 cu. m)
Ballast : 246,549 gals. (933.3 cu. m)
Potable Water : 32,820 gals. (131.8 cu. m)
Dry Bulk : 12,000 cu. ft. @ 80 psi (339.8 cu. m @ 5.5bars)
Liquid Mud : 15,390.1 barrels (2,446.8 cu. m)
Methanol : 781.7 barrels (124.3 cu. m)

Special Features
Tuggers : Two (2) x 4 Tons
Ship Motion : Two (2) Passive Type Anti-Roll Tanks
Ship Motion : Bilge Keels
Positioning : DP 2
Deck Crane : One (1) x 3,100 lbs. capacity
Firefighting : Two (2) x 5,283 GPM Fire Monitors

Machinery
Main Engines : Two (2) CAT C280-8 Diesels, 6,598 BHP
Bow Thrusters : One (1) 1,200 HP Rolls Royce Swing Up
Bow Thrusters : One (1) Brunvoll FU80 LTC 2000
Stern Thrusters : One (1) Brunvoll FU80 LTC 2000
Speed : 13 knots
Generators : Two (2) x 910 kW
Generators : One (1) x 215 kW emergency

Life Saving Equipment
Life Rafts : Four (4) x 25-Man Inflatable Life Rafts
Life Rafts : Two (2) x 10-Man Inflatable Life Raft
Rescue Boat/Craft : One (1) x Narwhal SV 400 SOLAS RescueBoat with davit
Other gear as required by authorities

Flow-Back / Chemical

500bbl Approvals :
8 X 500bbl tanks (4,000 barrels) onvessel deck - All (8) tanks are capable of
carrying both hazardous and pollution material. Flow-Back carriage requires
USCG approval of chemical prior to carriage.

Electronics
Electronics Package :
JRC JUE-85 Inmarsat-C, JRC JSB-196 GMSSB Radio Telephone,
JRC NCT-196NDSC/NBDP Modem, JRC NDZ-127J DataTerminal,
JRC JFE-585 Echo Sounder, JRCNWZ-4570 GPS Navigator,
JRC JLR-7700MKII GPS Navigator, Furuno NX-300 Navtex,
JRC NCR-333 Navtex Receiver, Two (2) ICOM IC-M422,
ACR Navicast AIS Unit, Two (2) Furuno FM-8800D/8800S
VHF Radio Telephones, Havant Navitron NT88G Autopilot,
Three (3) Young Wind Trackers,Three (3) Meridian Gyro
Compasses, Three (3) ICOM Handheld Emergency VHF,
ACRRBL-32 406 EPIRB, Two (2) ACR SART, JRC Doppler Log,
Two (2) JRC Radars, Two (2) DGPS, VSAT System, CyScan,
Two (2) MRU, Marine Technologies Dynamic Positioning System

Accommodations
Accommodations : 29

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Offshore Supply Vessel for Sale
OSV for Sale
PSV - 280ft - for Sale
Offshore Supply Vessel - 2007 Built - for Sale
280ft Platform Supply Vessel for Sale
---------------------------------------------------------------------------------------------------------
Available for selling

Platform Supply Vessel - 2007 Built - For Sale
Contact Us
ID 2782
PSV for Sale
Worldoils Marketplace
PSV for Sale

Worldrigs ID: WR2783

302FT Offshore Supply Vessel for Sale
PSV for Sale


Description :

General
Vessel Type : PSV - Platform Supply Vessel
Vessel Class : OSV - Offshore Supply Vessel
Year Built : 2007
Year Converted/Modified : 2016
Classification : ABS, USCG, SOLAS, MARPOL

Capacities
Fuel Oil : 377,301 gals. (1,428.2 cu. m)
Ballast : 326,404  gals. (1,236 cu. m)
Potable Water : 34,701 gals. (131.4 cu. m)
Dry Bulk : 12,000 cu. ft. @ 80 psi (339.8 cu. m @ 5.5bars)
Liquid Mud : 15,403.2 barrels (2,449 cu. m)

Fuel Consumption
Reduced Frequency Conversion :
Variable Frequency Modifications forImproved Fuel Consumption

Reduced Frequency Conversion :
Engines / Generators operating at reduced variable frequency
speeds to suit loads during DP operations, decreasing fuel
consumption and reducing fuel emissions.

Special Features
Ship Motion : Two (2) Passive Type Anti-Roll Tanks
Ship Motion : Bilge Keels
Positioning : DP 2
Deck Crane : One (1) x 3.0 LT SWL, 30ft Fixed Boom, (MCF-530 North Pacific Crane)
ROV : One (1) STBD. Side Launch ROV System (C-Innovations)

Machinery
Main EnginesT : wo (2) Caterpillar  C280-8 Diesel Engines
Propulsion : Two (2) Schottel Controlled Pitch Propeller(CPP) Wheels
Bow Thrusters : One (1) x Brunvoll FU80 LTC 2000 Electric Driven
Stern Thrusters : One (1)  x Brunvoll FU80 LTC 2000 Electric Driven
Swing Down Combination Thruster : One (1) x Ulstein TCNC 73/M-180 1,100 BHP Thruster
Speed : 12.5 knots @ 11.5 ft. Draft
Emergency Generators : One (1) x John Deere 175kw Generator
Ships Service Generators : Two (2) x Caterpillar 3508B Diesel Generators 910 kw ea.

Life Saving Equipment
Life Rafts : Four (4) x 25-Man Inflatable Life Rafts
Life Rafts : One (1) x 10-Man Inflatable Life Raft
Rescue Boat/Craft : One (1) x Fast Rescue 450A Rescue Boatwith Davit

Other gear as required by authorities

Flow-Back / Chemical
500bbl Approvals :
8 X 500bbl tanks (4,000 barrels) onvessel deck - All (8) tanks are capable of
carrying both hazardous and pollution material. Flow-Back carriage requires
USCG approval of chemical prior to carriage.

Accommodations
Accommodations : 29 Bunks (9-Crew + 20 Offshore Workers)

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
302FT Offshore Supply Vessel for Sale
PSV for Sale
2007 Built Platform Supply Vessel for Sale
OSV - 302ft - For Sale
2016 Modified PSV for Sale
29 Bunks Offsore Supply Vessel for Sale
---------------------------------------------------------------------------------------------------------------
Available for selling

302FT Offshore Supply Vessel for Sale
Contact Us
ID 2783
New UMD 135 Land Drilling Rig - For Sale
Worldoils Marketplace
New UMD 135 Land Drilling Rig - For Sale

Worldrigs ID: WR595

UMD 135 Land Drilling Rig - For Sale in Europe
New Semi Mobile Drilling Rig For Sale - UMD 135


Main Technical Specifications
Engine type : C 15 ACERT
Nominal engine power hp (kW) : 475 (354)
Transmission : Allison 4700 OFS
Nominal hoisting capacity metric ton (lbs) : 135 (297000)
Workover depht (m) drill pipe (2 7/8”) : 5800
Drilling depht (m) (4 1/2“) : 2500
Rope diameter (mm) : 26
Mast height (m) : 32
Drilling floor height (m) : 5
Travelling system : 5x4
Working pressure (mpa) : 0, 65-0, 8

Technical Specifications
Engine type : C 15 ACERT
Nominal engine power hp (kW) : 475 (354)
Transmission : Allison 4700 OFS
Nominal hoisting capacity metric ton (lbs) : 135 (297000)
Workover depht (m) drill pipe (2 7/8”) : 5800
Drilling depht (m) (4 1/2“) : 2500
Rope diameter (mm) : 26
Mast height (m) : 32
Drilling floor height (m) : 5
Travelling system : 5x4
Working pressure (mpa) : 0, 65-0, 8

Drawworks
Main Drum -
Input power (hp) : 500
Barrel size : D18” W38”
Brake rim size : D44” W12”
Wire line size : 1 ” (26 mm)
Drum speed : 7F/1R
Brake cooling : Water circulation
Brake system : Band / disc / auxiliary (Parmac SSR-28 hydro-brake)
Lubrication : Automatic or manual
Drum clutch : Air flex type
Chain drives :
All chains are fully encloded for oil bath lubrication ensuring longer life
and cleaner operation

Sand Line Drum -
Barrel size : D13” W37“
Brake rim size : D44” W9½”
Spooling capacity : 16114’
Sand line wire size : 9/16” (14 mm) - 5/8” (16 mm)

Rig Power & Transmission

Diesel engine(s) : Caterpillar C-15 ACERT, 540Hp, 2.100rpm
Transmission(s) : ALLISON OFS 4700 series with torque converter
Right angle gear box : Min 500 hp gear box in oil bath gear case
Compound box :
Twin engine drive through transmission includes disconnect clutches at
compound shaft for engines

Mast & Crown Block
Mast -
Mast complete set : Design and conform to APİ 4F specification
Mast height : 32m ( 105ft )
Max. static hook load capacity : 1.323kN ( 300.000lbs )
Racking capacity : 2.500m ( 4 ½’’ DP 19.2m double )
Height of the monkey board : 17.2m ( from floor )
Mast type : Hydraulic telescopic
Accessories : Two (2) X hydraulic catheads, Two (2) X tong weight boxes,
standpipe, exproof lightning....etc

Crown Block -
Crown block complete set : Design and conform to APİ 4F specification
Max. hook load : 1.323kN (300.000lbs)
Number of sheaves : (3) Main + (1) fast line + (1) deadline + (1) sandline
+ (2) sheaves for service winch

Sheaves OD :
Fast Lines Ø32" ( Ø813mm )
Dead Line Ø28" ( Ø711mm )
Sand Line Ø28" ( Ø711mm )

Dia. of sheave’s grove :
Fast & Dead Lines Ø1" ( Ø26mm )
Sand & Winch Lines Ø 5/8" ( Ø16mm )

Substructure
Substructure complete set : Design and conform to APİ 4F specification
Height of substructure substructure : 5m
Area of substructure : 40m2
Max. static rotary load : 1.400kN
Set back capacity : 700kN
BOP lifting tools : 3tons capacity electric or mechanic winches
Accessories : Mouse, rat hole, dog house

Rotary Table
Diameter of opening : 20½"
Center of table to centerline of sprocket teeth : 44"
Maximum static load, ton : 350
Max speed, rpm : 300
Gear ratio : 3.79
Dimensions (LxWxH), in : 78×56×24
Approximate Weight, lbs : 12,020

Traveling Block & Hook
Traveling block : 1.400kN max. statik load, 4 sheaves, Ø32’’ sheaves dia.
Ø1’’ (Ø26mm ) groove dia.

Hook : 1.400kN max. statik load, 5tons spring stroke.
Elevator link(s) : 1.400kN rated load capacity.

Swivel
Static hook load, ton : 135
Working pressure, psi : 5,000
Maximum speed, rpm : 300
Coupling thread to stem : 4-1/2" Reg LH
Coupling thread to kelly : 6-5/8" Reg LH
Stem İ.D. : 2- 1/2"

Trailer & Other Systems
Trailer :
Three axles semi mobile trailer, 16 wheels, fabricated high tensile steel vehicle
frame reinforced at points of greatest stress. Highway equipment and cab included.
Installed fuel tank. Tool box. Auxilary drill line drum, all axles dressed brake, folding
walkwayss on both sides of trailer.

Hydraulic jacks : Four hydraulic operated leveling jacks
Hydraulic service winch : 5 metric tons drum pull capacity
Deadline anchor : Deadline anchor attached directly to trailer frame
Air system : Compressor (engine drive), air tank, relief valves, air dryer,
gauges, all clutches

Hydraulic system :
Hydraulic pump, system operate hydraulic cylinders on mast, hydraulic jacks, hydraulic
pipe tong, and hyraulic winch. Control valves, hydraulic oil tank, filters, pipes, hydraulic
and air valve connections, fittings.

Electrical lighting system : All the electrical equipments on the mast, and substructure
are ex-proof type

Instrumentation : Driller control panel, weight indicator, gauges, air valves, cables,
hoses, fittings, transducers, paint

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

Land Rigs

-------------------------------------------------------------------
Search words(for official use only) :
UMD 135 Land Drilling Rig for Sale
UMD 135 Semi Mobile Drilling Rig For Sale
New Semi Mobile Drilling Rigs
New UMD 135 Drilling Rig For Sale in Europe
Land Drilling Rigs For Sale

 ------------------------------------------------------------------
Available for selling

UMD 135 New Land Drilling Rig - For Sale
Contact Us
ID 595
Taylor 500 Workover Rig for Sale
Worldoils Marketplace
Taylor 500 Workover Rig for Sale

Worldrigs ID: WR2922

Taylor 500 Well Service Rig for Sale
Taylor 500 Workover Rig for Sale


Specifications :

Manufacturer : Taylor
Model : 500 Workover Rigs
Condition    : Used
Derrick : 104ft
Hook Load : 240,000 LBS
Engine : Caterpillar C-15
Engine HP : 500

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


--------------------------------------------------------------------------------------------
Search words (for official use only) -
Used Workover Rig For Sale
Used Taylor 500 Well Service Rigs For Sale
Land Workover Rig for Sale
Taylor Well Service Rigs For Sale
Taylor Double Drum Workover Rig for Sale

-----------------------------------------------------------------------------------------
Available for selling

Taylor 500 Well Service Rigs - For Sale
Contact Us
ID 2922
Mobile B37X Crawler Drilling Rig for Sale
Worldoils Marketplace
Mobile B37X Crawler Drilling Rig for Sale

Worldrigs ID: WR2573

Mobile B37X Crawler Drilling Rig for Sale
Drilling Rig - Mobile B37X Crawler - For Sale


Model : B37X Drill Rig - Crawler
Manufacturer : Mobile
Year : 2017
Condition : Used

Description :

2017 Mobile B37X Crawler Drill Rig
600 Hours
8,000 ft/lb
1050 RPM
13 ft stroke
Auto hammer
308 Undercarriage
20,000 lb main winch
Bean 1122 pump
1,000 psi piping
Wireless
John Deere 140HP- tier 3
Angle Drill

Selling Fully Tooled :
44 lightly used 4 1/4 HS augers
820 ft NQ rods
20 ft Longyear barrel
10 ft HQ barrel
190 ft of AWJ rods

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Mobile B37X Crawler Drilling Rig - 2017 Built for Sale
2017 Built Mobile B37X Crawler Drilling Rig for Sale
Used Mobile B37X Crawler Drilling Rig for Sale
Mobile Crawler Drilling Rig for Sale
Mobile B37X Crawler Drilling Rig for Sale in USA

-------------------------------------------------------------------------------------------------------
Available for selling

Mobile B37X Crawler Drilling Rig - For Sale
Contact Us
ID 2573
UDR 1500 Range III Mobile Drilling Rig for Sale
Worldoils Marketplace
UDR 1500 Range III Mobile Drilling Rig for Sale

Worldrigs ID: WR2780

UDR 1500 Range III Mobile Drilling Rig for Sale
Used UDR 1500 Drilling Rig for Sale


Model : UDR 1500 Drill Rig - Range III
Manufacturer : Generic
Condition : Used

Description :

UDR 1500 Range III Mobile Drill Rig
Mounted on a 2004 International 5800i Tri-Axle Truck
Engine Hours : 11,804
75 ft - 90,000 lb static hook load capacity
hydraulic raise and lower mast
Rexroth 44,000 lb draw works
Top drive
GD mud pump
CAT C15 14.6L diesel engine
525 Adv horsepower
Engine brake
Eaton Fuller 18 speed manual transmission
352” wheel base
40,000 lb front axle
51,000 lb rears
Rig was almost completely overhauled . Hydraulics , hoses, box  etc.

Location : North America

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
UDR 1500 Drilling Rig for Sale
UDR 1500 Range III Used Mobile Drilling Rig for Sale
Generic Used Mobile Drilling Rig for Sale
Generic Drilling Rig for Sale
Generic UDR 1500 Range III Mobile Drilling Rig for Sale

-------------------------------------------------------------------------------------------------------
Available for selling

UDR 1500 Range III Mobile Drilling Rig - For Sale
Contact Us
ID 2780
Drilling Rig - Schramm RC685 - 2011 Built
Worldoils Marketplace
Drilling Rig - Schramm RC685 - 2011 Built

Worldrigs ID: WR994

Schramm RC685 Exploration Drilling Rig for Sale
Drilling Rig - Schramm RC685 - 2011 Built


Model : RC685 Exploration Drill Rig
Manufacturer : Schramm
Year : 2011
Condition : Used

Description :

2011 Schramm RC685 Exploration Drill Rig
MTU V2000 Diesel Deck Engine
Sullair 1350 cfm / 500 psi Air Compressor
Hours : 12,317
Miles : 7,129
Boart Longyear Rod Handler
Hydraulic Pumps
Collector Box & Cyclone
Drill Table Opening : 22 inch
Rod Spinner & hydraulic breakout wrenches
Rated Depth Capacity : 5-1/2" diameter hole to 2,300 feet deep
Rated Pullback : 94,000 lbs
CAT Walk
Hydraulic Leveling Jacks
Mounted on a 2012 International Truck
MaxxForce Diesel Engine
Misc Drill Tooling for an extra cost (in pictures) Stablizer,
Hole Opener, Collar, Land Plates

Note: Set up for RC (Reverse Circulation) minerial exploration & mining.
This is not a T685 model for water wells

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
2011 Built Schramm RC685 Exploration Drilling Rig for Sale
Used Schramm RC685 Exploration Drilling Rig for Sale
Schramm RC685 Exploration Drilling Rig - 2011 Built for Sale
Schramm Exploration Drilling Rig for Sale in USA
Schramm RC685 Used Exploration Drilling Rig for Sale in USA

-------------------------------------------------------------------------------------------------------
Available for selling

Schramm RC685 Exploration Drilling Rig - For Sale
Contact Us
ID 994
Portadrill 524-3A Drilling Rig for Sale
Worldoils Marketplace
Portadrill 524-3A Drilling Rig for Sale

Worldrigs ID: WR2779

Portadrill 524-3A Drilling Rig for Sale
Portadrill 524-3A Drilling Rig - 1978 Built - For Sale


Model : 524-3A Drill Rig
Manufacturer : PortaDrill
Year : 1978
Condition : Used

Description :

1978 Portadrill 524-3A Drill Rig
Gardner-Denver 5-1/2" Mud Pump
Leroi 256 S-2 250 PSI Air Compressor
Hydrostatic drawworks and rotary table
Pipe Slide
Injection pump
Hydraulic leveling jacks
Mounted on a 1999 Ford Louisville truck
Powered by Cummins Red Top N14 Diesel Engine - rated 500 HP
Tag axle

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Drilling Rig - Portadrill 524-3A - For Sale
1978 Built Portadrill 524-3A Drilling Rig for Sale
Portadrill Used Drilling Rig for Sale
Portadrill 524-3A Land Drilling Rig for Sale
Used Portadrill 524-3A Drilling Rig for Sale in USA

-------------------------------------------------------------------------------------------------------
Available for selling

Portadrill 524-3A Drilling Rig - For Sale
Contact Us
ID 2779
1,800BHP Towing/Supply Vessel
Worldoils Marketplace
1,800BHP Towing/Supply Vessel

Worldrigs ID: WR199

Towing/Supply Vessel for Sale - 1,800BHP 
1998 Built Towing Vessel for Sale

General Specifications

General Particulars :
Year Built : 1998
Class : BKI

Principal Particulars :
Length Overall : 23.04m
Breadth Overall : 8.00m
Depth Moulded : 3.16m
Designed Draft : 2.30m
GRT/NRT : 181 / 108 tons

Machinery :
Main Engine :
2 x CUMMINS KTA-38M
940 BHP each

Steering gear :
Electro-hydraulic steering gear of about 2.0m tons torque

Towing Winch :
Electric hydraulic single drum winch
50 tons breaking pull
1st layer 10 tons pull
Wire Length 350m, dia. 34mm

Propulsion : 
2 x REINTJES WAF 540 (Germany)
2 x Fixed Propeller inside stell nozzles
    
Generators     
2 x PERKINS Gensets T4236
45 kVA / 36kW / 380V / 50Hz / 3Ph

Propellers : 2 X 4 Blade Manganese Bronze Propeller c/w Kort Nozzles

Anchors : Dia. 17.5mm with 2 x 350kg anchors

Performance & Consumption :
Bollard Pull  : 22 Tons
Maximum Speed : 12 knots
Economical Speed : 7 knots
Fuel Consumption : 6 Tons/day
Endurance : 15 days
Clear Deck Space : 16 m2
Deck Strength : 5 Tons/m2

Cargo Capacity 
Fuel Oil : 75 Tons
Fresh Water : 22 Tons

Navigation Equipment
GMDSS (A1 + A2 + A3) : 1 x FURUNO RC-1500-IT
Satellite EPIRB : 1 x MCMURDO MCM-406A
Navtex Receiver : 1 x FURUNO/JRC
Radar : 1 x FURUNO/JRC
Echo Sounder : 1 x FURUNO/JRC
GPS Plotter : 1 x FURUNO/JRC
Gyrocompass : 1 x ANSCHUETZ
Autopilot : 1 x ANSCHUETZ
Magnetic Compass : 1 x SAURA or equivalent
2 Way Portable VHF Radio 3 x FURUNO/JRC

Deck Equipment :
Anchor Windlass :  Miyako Seisakusho GM - LJ

Safety Equipment :
SOLAS compliant

Search words :
Towing/Supply Vessel For Sale
1800bhp Towing Vessel for Sale 
1998 Built Towing/Supply Vessel
Towing Tug in Malaysia
Towing Tug in Singapore
Towing Tug in India
Supply Vessel for India

--------------------------------------------------------------------------------

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------

Available for selling

Towing/Supply Vessel - 1,800BHP - for sale
Contact Us
ID 199
Used Gardner Denver 14W Drilling Rig - For Sale
Worldoils Marketplace
Used Gardner Denver 14W Drilling Rig - For Sale

Worldrigs ID: WR2741

Gardner Denver 14W Drilling Rig for Sale
Used Gardner Denver 14W Drilling Rig - For Sale


Model : 14W Drill Rig
Manufacturer : Gardner Denver
Year : 1973
Condition : Used

Description :

1973 Gardner Denver 14W Drill Rig
Mounted on a CCC (Crane Carrier Company) Truck
390 ft of Drill Pipe included
Mud Pit & Tee
1000 cfm / 250 psi Air Compressor  
Gardner Denver 5x6 Mud Pump
Bean Water Injection Pump
Cummins 350 Diesel Engine
Foller 13 Speed Transmission
Hour meter reads 1978 Hours
Mileage reads 18,687 Miles
Newer Front tires

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
1973 Built Gardner Denver 14W Drilling Rig for Sale
Gardner Denver 14W Used Drilling Rig for Sale
Gardner Denver 14W Drilling Rig - 1973 Built
Gardner Denver Drilling Rig for Sale in USA
Gardner Denver 14W Land Drilling Rig for Sale in USA

-------------------------------------------------------------------------------------------------------
Available for selling

Gardner Denver 14W Drilling Rig - For Sale
Contact Us
ID 2741
Schramm T500XD Trailer Mounted Drilling Rig for Sale
Worldoils Marketplace
Schramm T500XD Trailer Mounted Drilling Rig for Sale

Worldrigs ID: WR2921

Schramm T500XD Trailer Mounted Drilling Rig for Sale
Trailer Mounted Portable Land Drilling Rig for Sale
Schramm Drilling Rig T500XD - For Sale
Schramm T-500 Rig for Sale


Rig Specifications :

Mast Unit 
The T500XD is a trailer mounted portable land rig designed to API 4F, 7K
and 8C standards. Dual MTU V2000 diesel engines provide power to the
hydraulic system for drilling operations.
 
The trailer mounted Telemast
system consists of fewer loads and offers rapid set-up and deployment.
Automated pipe handling, slip actuation and breakout systems set this
machine apart from conventional oilfield equipment. Our Half-Triple concept
is designed to utilize Range 3 drill pipe for increased drilling efficiency and
quick trip times.
 
The mast unit is mounted on a 4 axle trailer with tandem tag axle and
includes hydraulic components necessary to transmit power to the feed,
rotation and auxiliary functions. Quick coupled hoses transmit the hydraulic
supply from the Power Unit to the rigs Mast Unit.
 
Telescoping construction permits long head travel and working height, yet
short overall length in the transport position. Equipped with a 30" (762 mm)
cylinder operated slide, the mast is free-standing, all pullback loads are
directed into the floor, not the rig frame. The mast is anchored to the rig floor
via locking pins.
 
Feed System - The top head is raised and lowered by hydraulic traverse
cylinders through 2-7/16" (63 mm) OD wire rope (370 Tons Nominal Breaking
Strength per strand) and 77" PD Nylatron sheaves. As the tophead is raised,
the inner mast section extends by a ratio of 1:2 until it reaches its fully
extended position at 56ft of head travel.
 
Top Head Travel : 56ft (17.07m)
Hookload : 500,000 lbs. Actual (227,227 kg)
 
Hoist Speed (Both Engines) 
0 - 130,000 lbs. @ 136 fpm (regen), 
101,000 lbs. - 285,000 lbs. @ 106 fpm, 
286,000 lbs. - 305,000 lbs. 100 fpm, 
306,000 lbs. - 419,000 lbs. @ 76 fpm
420,000 lbs. - 500,000 lbs. @ 64 fpm
 
Pulldown Capacity : 80,000 lb (36.363 kg)
Pulldown Speed: 0 - 180 fpm loaded, 0 - 200 fpm free head (no load)
 
Mini Lube System - A multi-point systemis provided to simplify librication 
of drill components. Provides centralized grease fitting locations for top head,
crown, jib boom.
 
Top Drive Details
The hydraulic top drive is powered by a radial piston motor and is mounted to
a tilting slabback to facilitate pipe handling functions via the LoadSafe. A
floating sub is provided to extend the life of threads by removing feed cylinder
and pipe weight forces from threads while making and breaking tool joints.
Casing lifting eyes are slabback mounted to work in conjunction with
commercially available elevator links (not included). The top drive includes a
rotation lock and rebound prevention circuitry for use when directional
drilling. An in-line mud saver valve is mounted in the top drive spindle.
Connection at top drive swivel is 3".
 
Top Drive
Horsepower: 950
Rotation Speed: 0- 140 RPM
Rotation Torque: Up to 35,000 ft/lbs
Swivel: 3" cartridge style
Fluid Pressure Rating: 5000 psi
 
Air/Mud Fluid Lines - A 4" stand pipe and traveling hose is mast mounted
and includes 1502 class hammer unions for 5000 psi operation.
 
Main Winch - A hydraulically powered winch is mounted to the side of the
mast for utility lifting operations. The winch is a planetary type with
overrunning clutch, hydraulic brake valve and spring applied hydraulic
release brake. The winch operates independently of the other drilling
functions. Winch is reeved over a hydraulic jib boom which centers the line
over the center of the borehole.
 
Model: Braden PD12C
Drum Capacity: 547 ft (167 m) of 1/2" cable (12.7 mm)
Bare Drum Pull: 9,600 lb (4,354 kg)
Bare Drum Speed: 151 fpm (46.0 mpm)
150 ft Drum Pull: 8,700 lb (3,946 kg)
150 ft Drum Speed: 165 fpm (50.3 mpm)
 
Cable Supplied : 150 ft (46 m) of 1/2" cable
(12.7 mm) HSLR (high strength low rotation) cable.
 
Explosion proof lighting is provided for nighttime operations. Lighting is 240V
and is routed through an AC distribution panel and is fed from customer
supplied generators:
 
(3) 400W Metal Halide units on mast crown
(3) 60W Fluorescent units on RH side of mast
 
Transport Dimensions : Trailer Load 1
Length : 59ft
Weight : 10ft
Height : 13ft 6"
Est. Weight : 150,000 including the tandem tag dolly
 
Power Unit
The three axle trailer mounted unit includes the engine packages and
hydraulic power systems. Four outriggers are supplied to provide a stable
platform for the power trailer. Quick coupled hoses transmit the hydraulic
supply to the rigs Mast Unit.
 
Power : 2 x MTU 12V-2000TA DDEC Tier 2, 760 bhp (567 kw) @ 1,800 rpm
w/ electric start, includes (2) two 220 gal fuel tanks, diesel air shut down
system and silencer style muffler with heat wrap on exhaust components.
Battery shut-off switch is included.
 
Cooling : 2 x Two core, side by side package, 130°F (54.4°C) ambient rating,
with 60" hydraulically driven fan.
 
Hydraulic System
Each engine is directly coupled to a pump drive gearbox
to power its hydraulic power system. To obtain full system performance, both
engines must be operated at 1800 rpm. However, when drilling conditions
permit, one engine can be operated for fuel savings and to provide
maintenance capability without stopping the drilling process. Each engine
has an identical hydraulic system so either unit can be run with the same
performance. The hydraulic system includes a 1000 gallon tank with full
return oil filtrations. All pumps are protected by suction line strainers and all
hydraulic circuits are protected by relief valves and oil cooler system.
Walkway platforms are provided for access to hydraulic tank during
maintenance operations.
 
Hydraulic System
Pumps : Each engine powers (9) pumps. (8) piston and (1) one gear type
 
Filters : (18) twin element 10-micron replaceable elements with magnetic
particle strainers on return ports. High pressure 10-micron elements are
located on the power unit, mast unit and LoadSafe
 
Tank Capacity : 1,000 gal. Magnetic strainers and shut-off valves on all
suction ports
 
Electric Heating : (10) 2,000W elements are provided in the hydraulic tank
Water Injection, Bean 35 gpm
 
A fixed displacement gear pump hydraulically drives the triplex piston pump
for coring and grouting. RPM adjustment is achieved through use of a flow
control valve and includes a gauge to monitor discharge pressure.
 
Pump Model : FMC Bean W1122BCD
Maximum Flow: 35 gpm (132.5 lpm) @ 1,000 psig (69 bar)
 
Tool Lubricator, Piston Pump
 
An air operated piston pump provides "rock drill" oil for DTH operations.
Lubricator is activated and controlled from the operators station.
 
Oil Flow : 0 - 5 g/hr (0 -18.9 l/hr)
Max Pressure: 1,000 psi (69 bar)
Reservoir Capacity: 18.1 gal (68.5 l)
 
Air Manifold - A manifold is provided for air drilling operations. The system
included a hydraulically actuated valve for the main air control and drill string
vents. Includes connections for DTH lubricator and water injections supplies.
 
Safety Equipment - (4) Four fire extinguisher and (4) four emergency stop
buttons are provided. One of each is located on all 4 corners of the power
unit.
 
Tool Box - A lockable tool box is located on the right hand side of the rig.
Capacity - 9 cu ft (.25 cu m).
 
Transport Dimensions : Trailer Load 2
Length : 49ft
Width : 10ft
Height : 12ft
Est. Weight: 85,000 lbs
 
Sub Base
The sub base is a cantilever design which offers a stable platform and
compact footprint and is a multi-piece package consisting of 5 transport
loads. The sub base includes a walking system which allows the rig to be
accurately position over the conductor hole and provides quick moves from
hole to hole while operating on pad drill sites. The walking system also
allows for re-leveling of the machine if required. The sub structure set-up
and walking systems are operated by a radio control module. Includes
staircases, walkways and railings as required.
 
Floor Height : 22ft
Clearance : 19ft under table bushing
 
Ground Pressure :
Dead Load : 26 psi
Live Load : 57 psi
Walking, Mast Down : 41 psi
Walking Mast Up : 56 psi
 
HPU for Sub Base is provided with both manual and radio remote controls :
Diesel Engine - 4-cylinder Perkins
Hydraulic System : Single fixed volume pump
Hydraulic Tank - 750 gal. with (3) 2,500W in-tank heaters
 
Walking System
The walking system consists of 4 hydraulically operated pad systems which
are located at each corner of the parallel lift sections. Lift cylinders raise the
machine 6" off of the ground and slide cylinders translate the machine 12" in
any direction in 5 degree increments. Walking Speed is 30 fph.
 
Transport Dimensions : Misc. Loads 4 - 7
 
Rig Floor and Control Room - The rig floor and control room are mounted on
a three axle trailer assembly that is integrated to the sub base during rig up
operations. The rig floor contains 37-1/2" false table adapter and a 27-1/2"
Master Bushing. The hydraulic roughneck is floor mounted and provides
make-up and breakout of tubulars up to 9-1/2" OD. A hydraulic slip lifter is
provided. Slips are provided for the following :
 
6-1/2" Collar
8" Collar
4-1/2" Drill Pipe
5-1/2" Casing
9-5/8" Casing
13-3/8" Casing
 
Power Breakout
The arm swings beneath the top head by a hydraulically powered geared
actuator. The lower jaws grab and hold the lower joint while the upper jaws
grab and rotate the upper joint to make or break the connection. Units
height is adjustable by 24" to allow for variances in the landed height of the
drill string. 2 sets of jaw dies are required to cover the full diameter range of
this unit. 8 x 3528-0011 dies are required for clamping diameters under 4-
1/2". Torque is adjustable in both the make and break directions and is
monitored via a hydraulic pressure gauge.
 
Range : 4-1/2" - 9-5/8" diameter
Clamping Force : Adjustable to 61,500 lbs @ 3000 p
Break/Make Torque : 60,000 ft/lbs @ 3500 psi
 
Main Deck Lighting :
 
(18) Metal Halide units on sub base
for the driller and LoadSafe operator. All rig and LoadSafe controls are within
easy reach of the operators. The control room is positioned to provide good
visibility of the rig floor and camera systems provide the operators with views
of the area around the LoadSafe and BOP. Accommodations are provided
for third party instrumentation packages.
 
Monitors : (3) 15" touch screen type
Controls : (2) control positions. (1) each for driller and LoadSafe operator.
Driller has (2) screens, (3) multi-function joysticks and additional control
switches. The LoadSafe operator has (1) screen and (2) multi-function
joysticks.
Seating : (2) fully adjustable swiveling chairs
Lighting : (2) 120V 60W fluorescent fixtures
Electrical Accessory Circuits: (10) duplex outlets, 80 amps total accessory
supply
Heating : air handler, 24,000 btu
Cooling : air handler, 11,000 btu
Power Requirement : 100 amp, 240V AC Single Phase. Routed through a
distribution panel.
 
The control room is equipped with hardware for wireless remote connectivity
which allows for monitoring of rig system from a remote location.
 
Transport Dimensions : Trailer Load 8
Length : 53ft
Width : 10ft
Height : 13ft6"
Est. Weight : 85,000 lbs
 
LoadSafe
The LoadSafe automated pipe handling system is skid mounted and provides
hands-free pipe handling for drill pipe, drill collars and casing. The LoadSafe
lifts tubulars from the horizontal position into alignment with tilting top head
and advances forward or slides back to allow easy interface with the top drive
spindle and will pass 24" casing. Built-in holding clamp allows for make-up or
break-out of tool joints from top drive spindle.
 
Two (2) pipe arms per side are provided with indexing systems insure that
one pipe is loaded at a time. Arms are positioned to allow the use of Range
2 or Range 3 tubulars.
 
Arm Length: 129" per side.
 
Only one set of jaws I required to cover the full range of tubular diameters
(4" -24"). The jaws are simply moved to one of 4 locations on the clamp
arms to accommodate 4 separate diameter ranges.
 
Diameter Range 1: 4" - 10"
Diameter Range 2: 10" - 14"
Diameter Range 3: 14" - 20"
Diameter Range 4: 20" - 24"
 
Six (6) hydraulic outriggers are provided to level the machine for stable
operation.
 
Capacity: Up to Range 3
Lift: Up to 10,000 lbs
Average Trip Time: 1,000 fph 
 
Transport Dimensions : Skid Load 3
Length : 53ft
Width : 9ft
Height : 6ft
Est. Weight : 55,000 lbs

BOP Carraige
BOP Carriage is designed to interface with the customers supplied BOP
transport and skid system. A trolley mounted hoist lifts BOP and rolls it into
position over the borehole. A twin beam track system is mounted to the
bottom of the rig floor during initial rig-up. This system includes a 15 ton
chain hoist.
 
Interface Connections
Includes (18) hydraulic hoses and (3) electrical cord sets required to connect
the Power Unit to the Mast Unit and the LoadSafe.
 
Paint Standard Colors
Rig Mast Trailer Unit, Sub Base and LoadSafe are painted Schramm Red.
Rig mast and control room are painted white. Mast crown, top drive and
railinngs are painted safety yellow. Two part polyurethane enamel. Sherwin
Williams Polane G+.
 
Rig Performance Parameters
TBD prior to order acceptance.
 
Start-up and Initial Testing
Drill rig components will be built in West Chester, PA, USA for deployment to
Alpha Hunter Drilling LLC rig-up yard for integration, set-up and start-up
testing. Schramm will be responsible for functional and initial testing in West
Chester and start-up testing of the rig components listed in the Scope of
Supply at the Alpha Hunter yard in PA, WV or OH (TBD) once the drilling
package is assembled. Alpha Hunter Drilling LLC will be responsible for the
components it supplies.
 
Horizontal Well Testing
Schramm service technicians and engineers will be on-site during the drilling
of two (2) horizontal wells by Alpha Hunter Drilling personnel in the PA, WV
or OH location of their choosing. Alpha Hunter Drilling LLC will be
responsible for the rig operation.
 
Training and Field Service Support
Schramm will train Alpha Hunter Drilling crews in the operation and
maintenance of the drilling rig and will be either on-site or available on a 24/7
basis during the first 6 months after delivery.

Other Considerations
It is understood that the T500XD is a prototype drilling rig, and as such, may
require additional testing, extra time for set-up, trouble shooting and field
modifications not typically associated with a production model. Alpha Hunter
Drilling will cooperate and coordinate with Schramm personnel to facilitate
testing and repairs as may be required. Schramm personnel can have
access to the rig when and where appropriate and may bring visitors to either
aid in the repairs or maintenance, or for the purpose of demonstration to
potential customers. Prototype specifications are subject to change and will
be mutually agreed to prior to implementation and may affect final price or
delivery.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


--------------------------------------------------------------------------------------------
Search words (for official use only) -
Schramm T500XD Trailer Mounted Drilling Rig for Sale
Trailer Mounted Portable Land Drilling Rig for Sale
Schramm Drilling Rig T500XD - For Sale
Schramm T-500 Rig for Sale

-------------------------------------------------------------------------------------------
Available for selling

Schramm T500XD Trailer Mounted Drilling Rig for Sale
Contact Us
ID 2921
Used 5000psi Annular BOP
Worldoils Marketplace
Used 5000psi Annular BOP

Worldrigs ID: WR299

5000psi Annular BOP for sale - Used & Refurbished
Annular BOP For Sale - 5000psi


Annular BOP model Spherical
11” x 5.000 PSI – WP
Top studded x bottom flanged 5.000 PSI – WP

2 nos. available

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


-------------------------------------------------------------------------------------------------------
Search words :
Used Annular BOP for sale
5000psi Annular BOP for sale
Refurbished Annular BOP model Spherical 5000psi
Spherical Annular BOP for sale
Annular BOP model Spherical 5000psi

---------------------------------------------------------------------------------------------------------
Available for selling

Annular BOP - 5000psi for sale
Contact Us
ID 299
HT 400 Pump with 4 1/2 Inch Plungers
Worldoils Marketplace
HT 400 Pump with 4 1/2 Inch Plungers

Worldrigs ID: WR575

HT 400 Pump with 4 1/2 Inch Plungers for Sale
HT 400 Pump with 4 1/2 Inch Plungers for Drilling in Singapore
Plungers for Drilling


Specifications

HT 400 pump with 4 1/2 " plungers
Max pressure 11,200 psi
Max vol. 10.8 bbl per min coupled with GM 8V71 engine and
Allison 750 transmission
All on a skid

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need, please send
us an email to mail@worldoils.com stating your requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------
Search words(for official use only) -
HT 400 Pump with 4 1/2 inch Plungers For Sale
Plungers for Drilling
Used HT 400 Pump with 4 1/2 Inch Plungers in Singapore
HT 400 Pump with 4 1/2 Inch Plungers for Drilling in Singapore
Drilling Equipment - HT 400 Pump with 4 1/2 Inch Plungers

------------------------------------------------------------------------------------------
Available for selling

HT-400 Pump with 4 1/2 Inch Plungers for Sale
Contact Us
ID 575
Drilling Rig - Schramm T130 - For Sale
Worldoils Marketplace
Drilling Rig - Schramm T130 - For Sale

Worldrigs ID: WR846

Schramm T130 Drilling Rig for Sale
Drilling Rig - Schramm T130 - For Sale


Model : T130 Drill Rig
Manufacturer : Schramm
Condition : Used

Description :

Schramm T130 Drill Rig
Diesel Deck Engine
Mounted on a CCC Truck
Diesel Engine

Included as a package:
4-1/2" Bottle Neck X Hole Drill Pipe
6" Collars = 90 ft
All Subs needed to drill
Spare Motor
Spare Parts : Top Drive (Rebuilt no hours), New Spindle,
Bearings for top drive, Chive Crown
Pipe Racks with Catwalk (30 ft L X 5 ft W X 3-1/2 ft T)

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Schramm Drilling Rig for Sale
Used Schramm T130 Drilling Rig for Sale
Schramm T130 Drilling Rig for Sale in USA
C for Sale
Schramm Used Drilling Rig for Sale in USA

-------------------------------------------------------------------------------------------------------
Available for selling

Schramm T130 Drilling Rig - For Sale
Contact Us
ID 846
Foremost CTR Single Coil Tubing Hybrid Drilling Rig - 2005 Built
Worldoils Marketplace
Foremost CTR Single Coil Tubing Hybrid Drilling Rig - 2005 Built

Worldrigs ID: WR2778

Foremost CTR Single Coil Tubing Hybrid Drilling Rig for Sale
Foremost CTR Single Coil Tubing Hybrid Drilling Rig - 2005 Built


Description :

Drawworks :
Foremost Hydraullic Drawworks, 95,000 LB Capacity, 400 ft
Drum Capacity

Drawworks Power : Detroit Series 60 Floor Engine

Hydraullic Power Unit :
W/(5) Main Hydraullic Pumps, Hydraullic Reservoir, Thermal
Exchanger, Plumbing, Filters

Mast :
Foremost 85 ft Mast, 140,000 LB Maximum Hook Load w/(4) Lines,
1" Drill Line, (2) 4 Stage Mast Raising Cylinders, Chains, Stand
Pipe, Hydraullic Piping, Utility Winch, Access Ladder, Lighting,
Fall Arrest

Substructure :

Foremost Trailer Mounted Raised Substructure; Sliding Trolley BOP
Handler w/(2) Hydraullic Cylinders, Manual Cellar Controls, Standpipe
Valve, Steam Manifold, Explosion Proof Lighting, Mounted on 2005
Peerless T/A 16 Wheel Trailer, Tires 11 R22.5, Steel Buds, Spring
Suspension, w/ Rear Outriggers, Front Levelling Jacks, Hydraullic &
Electrical Lines"

Rotary Table :
16" Rotary Table, w/1,600 LB Torque, 140,000 LB Maximum Load

Top Drive :
Fluid Design Solutions Model FDS240T 70 Ton Hydraullic Top Drive
w/ Integrated Swivel, Integral Travelling Block & Backup Leg

Injector :
Steward Stevenson Model M1100SK Injector, 110,00 LB
Lifting Capacity, 60,000 LB Snub Capacity

Hydraullic System & Components :
Raising Cylinders, Winches, BOP Handler, Doghouse Raising System,
Hoses, Filters,Valves

(1) Set Web Wilson Type AAX Manual 27/8"-95/8" Rotary Tongs
(1) Drill Pipe Elevator

Set Handling Tools :
Drill Pipe, Drill Collar Slips, Safety Clamp, Drill Pipe Elevators
Townsend Type 85 SPH Annular Preventer, 9"x 3,500 psi
(2) Townsend Model T88 Ram Preventer, 9"x 3,000 psi
Control Tech Working Spool, 9"x 3,000 psi, w/2" Outlets
Control Tech Crossover Spool, 7"x 3,000psi

Mud Pump :
Mastco Pump Shack, Model JBI JF800 Triplex Mud Pump, Detroit Series 60
14.7 Liter 700 Hp Diesel Engine, Tool Shop

Mud System :
358 BBL Mud Tank, (4) Compartments-17 BBL Trip Tank, 88 BBL Suction Tank,
125 BBL Settling Tank, 125 BBL Shaker Tank, Mix Pump,MixingGuns, Manifold

Swaco Mongoose - PT Elliptical - Motion Shale Shakers
(4) Mud Guns, (9) Flow Gates & Skimmers
Poorboy 28" In-Tank Degasser w/150 ft of 8" Vent Line
Chemical Mix Barrel w/5 Hp Electric Motor

(2) Mission Model 40202529 6x5x11 Pumps, w/ 50 Hp Electric Motor, 4" Manifold,
w/(7)4" Butterfly Valves, Hopper, Storage Compartment, Exhaust Fan, Mud Weight
Station, Pason Equipment

Drill Pipe :
(196)Joints 3 1/2" Range 3 Grade E Drill Pipe, w/ 3 1/2" IF Connections
(23) Joints 4" Range 3 Grade E Drill Pipe, w/ 3 1/2" IF Connections
(10) Joints 4 3/4" Drill Collars, w/ 3 1/2" IF Connections
(10) Joints 6 1/4" Drill Collars, w/4 1/2" XH Connections
(20) Joints 3 1/2" Hevi-Weight Drill Pipe, w/ 4 1/2" XH Connections

Combination Building :
12 ft x 54 ft Mounted on 4 Member Skid, Electrical Switchgear, Transformer,
Accumulator Plumbing, (15) Lockers, (2) Benchesw/ 9,000 Liter Fuel Tank,
(4) Product Tanks

Generator 1 :
Stamford Model 6063-MK35 350 KW Generator,w/ Detroit Series 60 475 Hp Diesel
Engine, w/ Electric Start, Lockout Box

Generator 2 :
Stamford Model IEC34-1 142 KW Generator,w/ Jhon Deere 190 Hp Diesel Engine,
w/ Electric Start, Lockout Box

MCC Panel, Transformer, Starters

Accumulator :
Control Tech Model Class 3 Accumulator, 80 Gallon Accumulator,5 Station Control,
3,000 psi w/ 178 Gallon Reservoir, PLC Remote, Cat Model Triplex Pump

Air Compressor :
National Compressed Air Model NCA-16-34GSD Air Compressor, w/ Sullair 2

Stage Air Compressor, 200 Hp Elecric Motor, 2005 Avis Welding & Fab 600

Instrumentation : 
psi Receiver,Selectronix Model ST-8 Instrumentaion

Diesel Day Tank, Liner Rack, Utility Bench, Tooling, Storage Cabinets
Explosion Proof Lighting
Weight Indicator, Rotary Torque Gauge, Pump Pressure Gauges, Tong Line
Gauges

Safety Equipment :
(3) Scott Air packs w/ (2) Spare Bottles, Fire Extinguishers, Welding Shields,
Safety Glasses, First Aid Kits, Stretcher, Eye Wash Stations,Safety Signs,
Lanyards

General Rig Tooling, Consumables, Rig Supplies, Spare Parts

Dog house :
9ft x 14ft, Drillers Control Console, Instrumentation, Storage Cabinets/Bench,
Stabbing Valve, Ruffneck Heater, A/C, Shelving

Tool House :
314 BBL Water Tank, Access Stairs, Safety Rails, Lubster, Cat Model 310 Triplex
Wash Pump, Utility Bench, Fastener Bins, Ruffneck Heater, Storage Compartments,
Tooling

Crew House 2005 Shelter Rig Managers Wellsite :
11.5ft x 45ft, Crew Washroom, Storage Area, Desk, Couches, Fridge, Stove,
Washer, Dryer, Washroom, Sleep Area Hydraulic Catwalk w/ Operator
Enclosure, Integral Hydraulic Power Unit, (4)  Swing Out Arms, (4) Levelling
Jacks, Hydraulic Pump w/ 50 Hp Electric Motor, (3) Hydraulic Pipe Tubs
w/ Controls, Manifold

2048-F
Choke & kill Line Valves, 2"x 3,000 psi w/ Hi-kalibre HCR, Manual Gate Valves,
Check Valves
Choke Manifold, 3" Gut Line x 5,000psi,w/ (2)2" Wing Lines, (8)2" Gate Valves,
(2)3" Gate Valves, Cortec 2" Chokes x 5,000 psi
Flare Tank skid mtd w/7ft x 8ft x 7ft Tank, w/(2)2",(1)6" Knockouts, 3" Flare
Line, 6" Degasser Line, Safety Rails, Stairs
Boiler : 2005 Williams & Davis 777 Volcano 100 Hp Boiler
(4)2m x 5m Rig Mats

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
2005 Built Foremost CTR Single Coil Tubing Hybrid Drilling Rig for Sale
Foremost Coil Tubing Hybrid Drilling Rig for Sale
Used Foremost CTR Single Coil Tubing Hybrid Drilling Rig for Sale
Foremost CTR Single Coil Tubing Hybrid Drilling Rig for Sale in USA
Foremost Combo Top Drive & Coil Tubing Drilling Rig for Sale

-------------------------------------------------------------------------------------------------------
Available for selling

Foremost CTR Single Coil Tubing Hybrid Drilling Rig for Sale
Contact Us
ID 2778
New UMD 110 Land Drilling Rig - For Sale
Worldoils Marketplace
New UMD 110 Land Drilling Rig - For Sale

Worldrigs ID: WR593

UMD 110 Land Drilling Rig - For Sale in Europe
New Semi Mobile Drilling Rig For Sale - UMD 110


Main Technical Specifications

Engine type : C 13 ACERT
Nominal engine power hp (kW) : 415 (309)
Transmission : Allison 4500 OFS
Nominal hoisting capacity metric ton (lbs) : 110 (242000)
Workover  depht (m) drill pipe (2 7/8”) : 4500
Drilling depht (m) (4 1/2“) : 1500
Rope diameter (mm) : 26
Mast height (m) : 32
Drilling floor height (m) : 5
Travelling system : 4x3
Working pressure (mpa) : 0, 65-0, 8

Technical Specifications

Drawworks
Main Drum -
Input power (hp) : 450
Barrel size : D18”  W38”
Brake rim size : D44” W12”
Wire line size : 1 ” (26 mm)
Drum speed : 6F/1R
Brake cooling : Water circulation
Brake system : Band / disc / auxiliary (Parmac SSR-28 hydro-brake)
Lubrication : Automatic or manual
Drum clutch : Air flex type
Chain drives :
All chains are fully encloded for oil bath lubrication ensuring longer life
and cleaner operation

Sand Line Drum -
Barrel size : D13”  W37“
Brake rim size : D44” W9½”
Spooling capacity : 16114’
Sand line wire size : 9/16” (14 mm) - 5/8” (16 mm)

Rig Power & Transmission

Diesel engine(s) : Caterpillar C-13 ACERT, 415Hp, 2.100rpm
Transmission(s) : Allison OFS 4500 series with torque converter
Right angle gear box : Min 500 HP gear box in oil bath gear case
Compound box :
Twin engine drive through transmission includes disconnect clutches at
compound shaft for engines

Mast  & Crown Block
Mast -
Mast complete set : Design and conform to APİ 4F specification
Mast height : 32m  ( 118ft  )
Max. static hook load capacity : 1.100kN  ( 250.000lbs )
Racking capacity : 1.500m ( 4 ½’’ DP,19.2m double )
Height of the monkey board : 17.2m ( from floor )
Accessories : Standpipe , exproof  lightning....etc
Mast type : Hydraulic telescopic

Crown Block -
Crown block complete set : Design and conform to APİ 4F  specification
Max. hook load : 1.100kN (250.000lbs )
Number of sheaves : (2)  Main + (1) fast line  +  (1) deadline +  (1) sandline
+  (2) sheaves for service winch

Sheaves OD :
Fast Lines Ø32" ( Ø813mm )
Dead Line Ø28" ( Ø711mm )
Sand Line Ø28" ( Ø711mm )

Dia. of sheave’s grove :
Fast & Dead Lines Ø1" ( Ø26mm )
Sand & Winch Lines  Ø 5/8" ( Ø16mm )

Traveling Block  & Hook
Traveling block : 1.100kN Max. statik load, 3 sheaves, Ø32’’ sheaves
dia. Ø1’’  (Ø26mm ) groove dia.

Hook : 1.100kN Max. statik load, 3tons spring stroke.
Elevator link(s) : 1.100kN rated load capacity.

Swivel
Static hook load, ton : 110
Working pressure, psi : 5,000
Maximum speed, rpm : 300
Coupling thread to stem : 4-1/2" Reg LH
Coupling thread to kelly : 6-5/8" Reg LH
Stem İ.D. : 2-1/2"

Trailer  & Other  Systems
Trailer :
Three axles semi mobile trailer, 12 wheels, fabricated high tensile steel vehicle
frame reinforced at points of greatest stress. Highway equipment and cab included.
İnstalled fuel tank.

Tool box. Auxilary drill line drum, all axles dressed brake, folding walkwayss on
both sides of trailer.

Hydraulic jacks : Four hydraulic operated leveling jacks
Hydraulic service winch : 5 metric tons drum pull capacity
Deadline anchor : Deadline anchor attached directly to trailer frame
Air system : Compressor (engine drive), air tank, relief valves, air dryer, gauges, all clutches

Hydraulic system :
Hydraulic pump, system operate hydraulic cylinders on mast, hydraulic jacks,
hydraulic pipe tong, and hyraulic winch. Control valves, hydraulic oil tank, filters, pipes,
hydraulic and air valve connections, fittings.

Electrical lighting system : All the electrical equipments on the mast, and substructure
are ex-proof type

İnstrumentation : Driller control panel, weight indicator, gauges, air valves, cables , hoses,
fittings, transducers, paint

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


Land Drilling Rig


----------------------------------------------------------------------
Search words(for official use only) :
UMD 110 Drilling Rig For Sale in Europe
New UMD 110 Semi Mobile Drilling Rig For Sale
New Semi Mobile Drilling Rigs
Land Drilling Rigs For Sale
New Land Drilling Rig

---------------------------------------------------------------------
Available for selling

UMD 110 New Land Drilling Rig - For Sale
Contact Us
ID 593
Canterra CT-350 Drilling Rig for Sale
Worldoils Marketplace
Canterra CT-350 Drilling Rig for Sale

Worldrigs ID: WR2776

Canterra CT-350 Drilling Rig for Sale
Canterra CT-350 Drilling Rig - 1989 Built - For Sale


Model : CT-350 Drill Rig
Manufacturer : Canterra
Year : 1989
Condition : Used

Description :

Canterra CT-350 Drill Rig
Mounted on a 1989 Ford Truck
5-speed transmission with 2-speed rear
Diesel engine
Rod rack and plumbing for rotary option
Brand new hydraulic system installed in early 2019
(only 6 wells drilled in since)
Main line and sand line with free fall and spudder option
We would drive the wells in with a spudder option
Auger rack on the drivers side
Rod rack and tool box on the passenger side
Hydraulic Leveling Jacks

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
1989 Built Canterra CT-350 Drilling Rig for Sale
Used Canterra CT-350 Drilling Rig for Sale
Drilling Rig - Canterra CT-350 - 1989 Built
Canterra CT-350 Drilling Rig for Sale in USA
Canterra Land Drilling Rig for Sale in USA

-------------------------------------------------------------------------------------------------------
Available for selling

Canterra CT-350 Drilling Rig - 1989 Built - For Sale
Contact Us
ID 2776
Drilling Rig - Gus Pech 1000R - 1989 Built
Worldoils Marketplace
Drilling Rig - Gus Pech 1000R - 1989 Built

Worldrigs ID: WR2777

Gus Pech 1000R Drilling Rig - For Sale
Drilling Rig - Gus Pech 1000R - 1989 Built


Model : 1000R Drill Rig
Manufacturer : Gus Pech
Year : 1989
Condition : Used

Description :

Gus Pech 1000R Drill Rig
Set up for Mud Rotary & Auger
Mounted to a 1989 International 1900 Truck
5 speed transmission 2 speed rear
1936+ hours on rig
3 x 4 centrifugal mud pump
3" plumbing to side swivel
450 ft of (4.5″ x 3-2-7/8") drill pipe & holds 225 ft on board the pipe rack
Mud pan attaches to back of rig for transport
Comes with CAT head and auger attachment
3 winches
Jib winch Pullmaster winch 8500 lbs with rapid reverse
wire line for test sampling
2000 lbs sandline
Developmental air compressor
Tophead slides off pole to set pipe
Hydraulic Leveling Jacks

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
1989 Built Gus Pech 1000R Drilling Rig for Sale
Used Gus Pech 1000R Drilling Rig for Sale
Gus Pech 1000R Land Drilling Rig for Sale
Gus Pech Drilling Rig for Sale in USA
Gus Pech Used Drilling Rig for Sale in USA

-------------------------------------------------------------------------------------------------------
Available for selling

Gus Pech 1000R Drilling Rig - For Sale
Contact Us
ID 2777
Offshore Rig DP2 New System For Sale - Alstom
Worldoils Marketplace
Offshore Rig DP2 New System For Sale - Alstom

Worldrigs ID: WR645

Offshore Rig DP2 New System For Sale
Rolls Royce Aquamaster Thrusters and Alstom DP2 - New
Complete New Offshore Rig DP2 Package for sale
Complete New Ship DP2 Package for sale

“Six” Rolls Royce Bergen Model- B32 40L9A- 9 cylinder 5666 bhp
 @ 720 rpm 4 MW 11000 Volt @ 60HZ each.

Generators are ABS Marine certified and Heat exchanger cooled,
skid mounted.

Complete with all controls and switchgear

Alstom/Converteam, DP2 system

Complete with MV3000 Variable speed Drives 

“9”Rolls Royce 3MW Aquamaster UUC305 FP Thrusters 
underwater mountable

Complete with Electronic and Hydraulic controls Max torque 39.8 KNm,
3200mm prop. Ratio 3.5-1, Prop. Speed 260 rpm ABS Marine certified.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

--------------------------------------------------------------------------------------------------------- 
Search words(for official use only) - 
Offshore Rig DP2 system For Sale - New
Rolls Royce Aquamaster Thrusters and Alstom DP2 - New
Complete New Offshore Rig DP2 Package for sale
Complete New Ship DP2 Package for sale
Complete New Alstom DP2 system for sale
Rolls Royce Bergen Gensets for sale
Rolls Royce Aquamaster Thrusters for sale 
Rolls Royce Bergen Gensets for sale - New

-------------------------------------------------------------------------------------------------------

Available for selling

Offshore Rig DP2 New System For Sale - Alstom
Contact Us
ID 645
Platform Supply Vessel
Worldoils Marketplace
Platform Supply Vessel

Worldrigs ID: WR485

Platform Support Vessel for Sale
PSV for sale
Newbuilding PSV for sale


Delivery Q1, 2011

Principal Particulars :
Port of Registry : TBA
Length Overall : 74.87 m
LBP : 67.2 m
Breadth Moulded : 16.4 m
Depth Moulded : 7.45 m
Max. Draft : 6.23 m
Depth shelterdeck : 10.20 m
Deadweight at SWL : approx. 3,250 tonne
Gross Tonnage : approx. 2,820 tonne
Net Tonnage : approx. 1,060 tonne
Deck Loading : 5 tonne/m2
Clear Deck Area : 684 m2
Speed : 13 Knots
Classification : DNV+1A1(E)-E0-SF,dk(+),hl (2,5),AUTR,LFL*,
COMF-V (rating 3)

Main Machineries :
Main Engines : 4 x 1,239 eKW
Total Power : 4,956 eKW
Propulsion System : 2 x Rotatable (360 degree) Stern mounted el. Motor
Driven Azimuth Thruster Type Twin (Push and Pull)
Bow Thruster : 2 x Fixed Pitch Tunnel Thruster
Generator : 4 x 1,239 eKW, 690V/60HZ
Emergency Generator : 1 x 99 KW, 690V/60Hz

Tank Capacities :
Fuel Oil Tank : 1266 m3 (approx)
Liquid Mud (s.g 2.5) : 1083 m3 (approx)
Water Ballast : 1100 m3 (approx)
Drill Water : 930 m3 (approx)
Fresh Water : 650 m3 (approx)
Brine (s.g 2.5) : 424 m3 (approx)
Methanol (s.g 0.9) : 206 m3 (approx)
Base Oil (s.g 0.9) : 340 m3 (approx)
Glycol : 1290 m3 (approx)
Deck Cargo : 684 m2 (approx)
Bulk Cargo (Cement) : 256 m3 (approx)

Accommodation :
Single Berth : 4 x 1 Berth
Double Berth : 18 x 2 Berth
Total Complement : 40 Berth
Hospital : 1 room

Cargo Discharge Rates :
F.O. Cargo Pump : 1 x 200 m3/hr (Freq. Controlled)
F.W. Cargo Pump : 1 x 200 m3/hr (Freq. Controlled)
Base Oil Pump : 1 x 150 m3/hr (Freq. Controlled)
Methanol Pump : 2 x 75 m3/hr (Centrifugal)
Ballast / G.S. Pump : 1 x 150 m3/hr (Freq. Controlled)
Liquid mud Pump : 2 x 85 m3/hr (Freq. Controlled)
Brine Pump : 1 x 125 m3/hr (Freq. Controlled)
Deck Cranes : 1 x 3 tonnes @12 m, Knuckle Boom Type with 4m Jib
Cargo Securing Winches : 3 x 3 tonnes hoisting capacity 5 tonnes brake
Capstan : 2 x 10 tonnes
Anchor Windlass : According to class

Navigation & Communication Equipment :
1 Main Radar, ARPA 120 NM
1 Secondary Radar, 96 NM
1 Echo Sounder
1 Speed Log
1 Auto Pilot
1 Conning Display System
1 ECDIS
1 Clinometer
1 unit GMDSS extended packaged
1 Navigation / Direction Finder
1 NMEA Distribution unit with interface to DP
1 GyroCompass
1 off 12 channels DGPS satellite type FURUNO - 90
VHF and UHF Radio Telephone System
Intercommunication System with PABX line and line from VSAT
Command and Intercomm System
Sound Powered Telephone System

Fire Fighting System :
Internal FiFi System : FiFi System with CO2
FiFi System with Water mist
FiFi System With Hand Extinguisher
FiFi System With Spot FOG (Galley)

Life Saving Equipment :
MOB Boat with Davit : 1 off SOLAS approved type
Life Raft with Equipment : SOLAS approved type for 120 persons
Life Jacket : SOLAS approved type for 40 persons

Price & terms : Please enquire using the email form below

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
-------------------------------------------------------------------------------------------
Search words (for official use only) - 
Platform Support Vessel for Sale
MT 6009 MK II Platform Supply Vessel for Sale
Platform Support Vessel for Sale For sale
New PSV for Sale
MT 6009 PSV for Sale
Newbuilding PSV for Sale
Platform Support Vessel

-----------------------------------------------------------------------------------------

Available for selling

Platform Supply Vessel MT 6009 MK II - for Sale
Contact Us
ID 485
Shallow Draft Utility Vessels
Worldoils Marketplace
Shallow Draft Utility Vessels

Worldrigs ID: WR175

Towing / Utility / Supply Vessel for sale
Shallow Draft Utility Vessels - 2000bhp

General
Year Built : 1982
Classification : ABS + A1 + AMS + E and BKI
Dimension : 38.0 m x 9.5 m x 3.6 m
Draft - Light : 1.69 m
Loaded : 3.23 m
GRT : 413 NRT : 124
DWT : 475 tons

Cargo Capacity
Fuel Oil : 196 m3
Potable Water : 118 m3
Deck Cargo : 150 tons
Clear Deck Space : 15.0 m x 7.5 m

Refrigerated Storage Capacity
Freezer : 2 m3
Chiller : 2 m3

Accommodation
1 man cabin : 2
2 men cabin : 4
4 men cabin: 4
Total: 26(Fully Airconditioned)
Navigation & Communication
All round view wheelhouse.
Forward & aft control consoles(Pneumatic&Hydr.)
Radar, echo sounder, auto-pilot , Weather Fax
Gyro/magnetic compasses , GPS , SSB , VHF
Intercom/P.A. system , Navtex Receiver , EPMIRB

Anchor And Cable
Anchor : 2 x 690 kg each Stockless Anchor

Towing Equipment
Winch: 1 x single drum, 40 T Stall Pull
Drum Capacity: 700 m x 40 mm dia. Wire
Tugger winch : 1 x 5 MT line pull
Main Machinery & Propulsion
Main Engine : 2 x FUJI 6M23C, each 1000 BHP
Propulsion: 2 x CPP in Kort nozzles
Auxiliary Engine : 2 x Mitsubishi S6B-MPTK(ea 265 HP)
Alternator : 2 units, 200KVA each, 415V/3P/50Hz
Bow Thruster : 1 x 110 KW Electric Driven, 1.7 tons thrust

Cargo Pump Capacity
Fuel Oil : 60 m3/hr @ 40 m head
Potable Water : 60 m3/hr @ 40 m head
Ballast pump : 28 m3/hr @ 30 m head

Fire Fighting & Anti-Pollution
Pump : 1 x 300 m3/hr at 120 m head
Monitor : 2 x 2300 ltrs/min at 100 m head or 10 kg/cm2
Foam Tank : 4770 ltrs
Oil Dispersant Tank : 4770 ltrs
Spray Boom : 2 x 6 m length

Speed
10 knots

Bollard Pull
will be tested when required

Inspection/Delivery Far East As Is Where Is.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------
Search words :
Utility vessel for sale
Utility vessel for charter
Towing / Utility / Supply Vessel - 2000bhp
Shallow Draft Utility Vessels for sale

-------------------------------------------------------------------------------------
Available for selling

Shallow Draft Utility Vessels for sale
Contact Us
ID 175
PSV UT755LN for charter
Worldoils Marketplace
PSV UT755LN for charter

Worldrigs ID: WR72

PSV for Time Charter
UT755LN PSV for time charter

General

DPII FiFi1 UT755LN PSV
Class Notation : DNV 1A1 Fire Fighter I+SF E0 DYNPOS-AUTR CLEAN BIS TMON
Year of build : 2009

Main Particulars
Design : UT755LN
LOA : 73.6 m
Length BP : 68.3 m
Breadth Moulded : 16.0 m
Depth Moulded : 7.0 m
Max Loaded Draft : 5.87 m
Deadweight : 3250 T
Deck Area : 708 sqm

Performance
Trial Speed / Max : 13 knots (16T/24hrs)
Cruising Speed : 11 knots (12.5T/24hrs)
Economical Speed : 10 knots (10.5T/24hrs)

Capacities
Dry Bulk : 11250 cuft
Potable/Fresh Water : 840 m3
Drill/Ballast Water : 850 m3
Brine/Mud : 970 m3
Base oil : 200 m3
Fuel Oil : 950 m3

Deck Equipment
Capstans : 2 x 8 T
Tugger Winch : 2 x 10 T
Deck Crane : 1 x 3 MT @ 16 m

Discharge
Dry Bulk : 1 x 805 cuft/min
Fresh Water : 1 x 200 m3/hr at 9 bar
Drill/Ballast Water : 1 x 200 m3/hr at 9 bar
Brine/Mud : 2 x 75 m3/hr at 9 bar
Base Oil : 1 x 150 m3/hr at 9 bar
Fuel Oil : 1 x 200 m3/hr at 9 bar

Propulsion and Machinery
Main Engines : 2 x 2725 BHP/2005 KW
Total Main Engines : 5450 BHP / 4010 KW
Maine Engine Type : 2 x Ulstein Bergen
Propellers : 2 x CPP

Thrusters
Bow 1 : 1 x 600 KW/815 BHP
Bow 2 : 1 x 600 KW/815 BHP

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------------------
Search words(for official use only) -
New PSV for Time Charter
PSV for Charter
UT755LN for charter
PSV available for Time Charter
New UT755LN PSV for Time Charter

-----------------------------------------------------------------------------

Available for selling

PSV UT755LN for Charter
Contact Us
ID 72
   
1 2 3 4 5 6 7 8 9 10
  



Untitled Document
Featured equipments for sale
 
Tugboat For sale
Worldoils Marketplace
Tugboat For sale

Worldrigs ID: WR132

2006 Built Tug for sale
Tugboat for sale


Description


Type of Ship : Tug Boat,coastal and harbour
Built Year : May 8,2006
Class : ZC
GRT/NRT : 487tons/146tons

Dimensions
Loa : 42.60m
Lpp : 38.70m
Breadth (M) : 10.00m
Depth(M) : 4.50m
Light/loaded Draft : 2.77m/3.30m
Dissel Oil Capacity : 145.00tons
Freshwater Capacity : 65.58tons

Engine
M/E type/output/rpm/set : 6320zc-2/1213kw/428rpm/2sets
Fuel oil consumption : 198g/kw.h
Aux. Engine type/output/rpm/set : WD615.67CD/152kw/1500rpm/2sets
Aux. Engine at anchorage type/output/rpm/set : TD226B-2CD1/60Kw/1500rpm/1set
Generator type/output/rpm/set : 
TFXW-250L4-H/120kw/1500rpm/2sets
TFXW-225m4-H/50kw/1500rpm/1sets

Endurance : 2000 n mile

Speed : 12kn(designed)

Accommodation : 12 persons

Navaids : 
1NAVTEX,12SART,1VHF,1MHF,1Sound Echo,
1 Rudder indicator,1 Gyro compass, 1 Magnetic compass,1Radar, 1Satnavi.

Fire-fighting : Electric fir-fighting pump 1set,75kw,45m³/h,32.6m

Propeller : 2 Tube propeller/2060mm/Cu,Alum.,Mang. Alloy

Air conditioner : center air conditioner

Hook/Pull Ballard Capacity : 35tons/35tons

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------
Search words(for official use only) : 
Tug For Sale, 
Tugboat 2 x 1650hp For sale
Tug 2006 Built for sale
2006 Built Tugboat For Sale

-----------------------------------------------------------------
 
2 x 2040hp Tug Boat For Sale
Worldoils Marketplace
2 x 2040hp Tug Boat For Sale

Worldrigs ID: WR136

Tug Boat For Sale

Description:


Type of Ship : Harbour and towing Tug Boat with FiFi
Built Year : 18 Oct,2008
Class : ZC

Navigation/service area : Coastal/A1
GRT/NRT : 493t/147Mt

Dimensions
Loa : 38.80 m
Lpp : 35.00 m
Breadth (M) : 10.20 m
Depth(M) : 4.80 m
Draft(light/loaded) : 2.65/3.43 m
Light/loaded displacement : 714.90/1019.40 Mtons
Material(hull/deck) : Steel/steel

Engine
M/E(type/output/rpm/set) : G8300zc6B,1500kwx500rpm,2sets, Made in Wuxi,China

Aux.(type/output/rpm/set) : 
495AZD/35.30KW/1500RPM,/1sets, Made in China
6135Zcaf/1330KW/1500RPM/2sets, Made in China

Generator(type/output/rpm/set) : 
STC-30/30KW/1500RPM/1sets, Made in China
T2H2XV-120-2/120kw/1500rpm/2sets, Made in China

Bow thrust : Fitted

Oil : Light oil

Navaids : 
1 STR6000,1 FT1500,1 H3E/H3E/J2B/F1B,1 SAR-9, 
1 SEP-406,2 STV160,1 GPS,/2 MAGNETIC COMPASS, 1 SOUNDER ECHO

FiFi : Main fire pump 3BA6/60m³/h/0.50Mpa, Fire extinguisher 11sets,others 6uints

Propulsion : 1 Gear 1.757:1,2 stern shaft Dia.240mm,2 Dia.2000mm fixed Cu propeller

Annual survey : 27 Sept.,2009

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

--------------------------------------------------------------------------------------------------------
Search words (for official use only) -
Tug Boat - 2 x 2040hp - For Sale
2008 Built Tug for Sale
Tug Boat 2008 Built For Sale
Tug For Sale 

--------------------------------------------------------------------------------------------------------

 
T4W Drilling Rig For Sale
Worldoils Marketplace
T4W Drilling Rig For Sale

Worldrigs ID: WR463

Drilling Rig T4W For Sale
T4W Drill Rig For Sale

1984 T4W
70,000 pull back
900/350 air
12V71 on deck
3208 cat in carrier
good tires
set-up to run 2 7/8 IF rods
300 ft of rods
more rods avalible
some toolling and extras
serial #14042

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


Land Drilling Rigs

-----------------------------------------------------
Search words(for official use only) - 
Drill Rig T4W For Sale
T4W Drilling Rig For Sale

-----------------------------------------------------
1984 Built Ideco Rambler Rig for Sale
Worldoils Marketplace
1984 Built Ideco Rambler Rig for Sale

Worldrigs ID: WR2759

Ideco Rambler Workover Rig for sale
1984 Built Ideco Rambler Rig for Sale


1984 Ideco Rambler Rig, Model BIR-3185 Five Axle Carrier


Specifications

Single Drum H-35 Drawworks with 1” drill line
96’ x 215,000#  Ideco Derrick with rods & tubing racking boards
Detroit Diesel Series 60, 475 HP engine
Traveling Block, Ideco DS110, slotted speed kit design, 2 sheaves, 110 ton

Foundation, iron stands on 3” x 12” timbers
Allison CLT5860 Transmission
Hydromatic Brake, 15” double rotor with water tank
Tong, Gill Model 500 with back up head
Blowout Preventer, Townsend Type 81, 7-1/16” x 5000 psi. double stack
Stripper Head, Hall style 1500 psi.

Tubing Slips, Guiberson 60 ton air operated
Rod Elevators, 5/8” to 1”
Tubing Elevators, 2-3/8” to 2-7/8” EUE
Wash Swivel, King 53GA
Hand Tools

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------
Search words (for official use only) :
Ideco Rambler Workover Rig for sale
1984 Built Ideco Rambler Rig for Sale
BIR-3185 Five Axle Carrier Rig for Sale
Ideco Rambler Rig - Model BIR-3185 - For Sale
Workover Rig - 1984 Built - For Sale
Land Drilling Rig for Sale

-----------------------------------------------------------------
 
National Oilwell Carrier Workover Rig - 2007 Built for Sale
Worldoils Marketplace
National Oilwell Carrier Workover Rig - 2007 Built for Sale

Worldrigs ID: WR2760

National Oilwell Model 5C Five Axle K100C Carrier Rig for Sale
National Oilwell Carrier Workover Rig - 2007 Built for Sale


Description :

Single Drum D500  Drawworks with 1” drill line
104ft x 250,000# National  Derrick with rods & tubing racking boards
Detroit Diesel Series 60, 500 HP engine
Allison S5610H Transmission with drop box
Traveling Block, Ideco DS110, slotted speed kit design, 2 sheaves, 110 ton
Foundation, steel scissor beam on 3” x 12” timbers
Disc Assist Brake, model 54, 48” mounted  at the drum
Tong, Gill Model 500 with back up head
Blowout Preventer,  Townsend Type 81, 7-1/16” x 5000 psi. double stack
Stripper Head, Hall style 1500 psi.
Tubing Slips, Guiberson 60 ton,  air operated
Rod Elevators, 5/8” to 1”
Tubing Elevators, 2-3/8” to 2-7/8” EUE
Wash Swivel, King 53GA
Hand tools

Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


------------------------------------------------------------------------------------
Search words (for official use only) :
Used Workover Rig - 2007 Built for Sale
2007 Built National Oilwell Model 5C Five Axle K100C Workover Rig
National 5C Workover Rig for Sale
National 500 HP Workover Rig for Sale
Land Drilling Rig - National 500hp - for Sale in USA

------------------------------------------------------------------------------------
 
Alta 1500 HP AC/VFD Drilling Rig for sale
Worldoils Marketplace
Alta 1500 HP AC/VFD Drilling Rig for sale

Worldrigs ID: WR2757

Alta 1500 HP AC/VFD Drilling Rig for sale
1500HP AC/VFD Rig for sale


Mast
Clear Height : 142’
Max. Static Hook Load (12 Lines) : 800,000 lbs
Max. Wind Capacity : 75 knots

Substructure

Floor Height : 25’
Clear Height : 20’-6”
Rotary Capacity : 800,000 lbs
Setback Capacity : 600,000 lbs
Hole Opening : 37-1/2”

Top Drive
Max. Static Hook Load Rating : 500 tons
Max. Speed : 265 rpm
Max. Intermittent Torque : 71,000 ft-lbs
Max. Continuous Torque : 51,400 ft-lbs
Pressure Rating : 7,500 psi

Drawworks
Rated Capacity : 1500 hp
Max. Capacity (12 lines) : 800,000 lbs
Drum Groove : 1-3/8”

Mud Pumps
Input Horsepower Rating : 2,200 hp
Maximum Pump SPM : 120 rpm
Maximum Liner Size : 9”
Minimum Liner Size : 5”
Stroke : 14

Power Generation
Generator Power : 1350 kW @ 1200 rpm
Engine Power : 1476 HP @ 1200 rpm

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


------------------------------------------------------------
Search words (for official use only) :
Alta 1500 HP AC/VFD Drilling Rig for sale
1500HP AC/VFD Rig for sale
Land Drilling Rig for Sale
Used Drilling Rig - Alta 1500HP - For Sale
AC/VFD Rig for Sale

------------------------------------------------------------
Taylor C550 - Land Workover Rig
Worldoils Marketplace
Taylor C550 - Land Workover Rig

Worldrigs ID: WR502

Taylor C550 Double Drum Workover Rig for Sale
Used Taylor C550 Workover Rig


Drawworks :
2007 Model Taylor C550 Double Drum Workover Rig with 16,000’ of 7/16”
swab line, with 475 HP Cat engines

Mast :
112’ Telescoping, 240,000# Capacity

Carrier :
5 Axle carrier unit

Substructure :
10’ Taylor hydraulic floor with working height of 8 to 12’ and a
substructure ragted at 300,000#

BOP :
11” x 3000# LWS Shaffer 5K double ram and annular

Water Tank :
200 BBL work tank

Handling System :
5K pump Iron

Handling Tools :
BJ tongs for tubing and sucker rode & Kavin Slips

Ancillary Equip :
Complete with pipe racks and cat walk

Office Capacity :
Complete with portable office for service companies, with enough
desk space for four people, I.e. directional personnel

Drilling Components

Mud Pump (Main) :
PZ7 Main 550 HP mud pump with Detroit series 60 enging and 5- speed transmission

Mud Pump (Aux) :
Auxillary mud pump system – with 24 hour programs a 1000 HP
pump complete with one (1) Swaco Mongoose, one (1) Swaco Desander &
one (1) Swaco Hopper with two (2) 300 bbl tanks are available

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


Land Drilling Rigs


---------------------------------------------------------------------------------------------
Search words(for official use only) -  
Taylor C550 Double Drum Workover Rig for Sale
Land Rigs For Sale
Used Land Rigs For Sale
Used American Workover Rig
Used Taylor C550 Workover Rig
Workover Used Land Rigs For Sale

---------------------------------------------------------------------------------------------

 
1985 Built National 650HP Rig for sale
Worldoils Marketplace
1985 Built National 650HP Rig for sale

Worldrigs ID: WR2756

National 650HP Drilling Rig for Sale
2011 Rebuilt National 650HP Rig


General Description
Year Built/Rebuilt : 1985/2011
Estimated Drilling Depth : 8,200 ft
Estimated Rig Move Loads : 39
Estimated Camp Move Loads : 35
Rated HP : 650

Mast

Height : 113.00 ft
Static Hook Load Capacity : 286,000 lbs
Mast Racking Capacity : 10,000 ft

Substructure
Style : Telescoping
Height : 14.10 ft
Clear Height : 11.22 ft
Casing Capacity : 286,000 lbs
Maximum Setback Load (lbs) : 198,000

Drawworks

Make : National
Model : 4226D
Power Rating : 650 hp
Input Power : 1 ea Caterpillar D 3412
Drilling Line Size : 1 1/8"
Auxillary Brake : Parmac V-80

Top Drive / Power Swivel
No Top Drive

Swivel
Make : Upetrom
Model : CH 125
Capacity : 125 Ton

Rotary Table
Make : Upetrom MRS205
Table Opening : 20 ½
Maximum Load Rating : 350 Ton

Power Generation
Mechanical Rig

Mud System
Mud Pumps : 1 ea Upetrom 3PN-1000
Power Rating : 1,000 hp @ 150 spm
Pressure Rating : 5,000 psi
Active Mud Volume : 906 bbls
Reserve Mud Volume : 101 bbls
Shale Shakers : No Shale Shake, Mongoose
Mud Cleaner : N/A
Desander : N/A Brandt 10" X 2 Cones
Desilter : N/A
Centrifuge : N/A

Well Control

Annular : 9" 3,000 psi, Upetrom
Choke Manifold : Upetrom

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


----------------------------------------------------------------
Search words (for official use only) :
National 650HP Drilling Rig for Sale
1985 Built National 650HP Rig for sale
Used Drilling Rig for sale
Trailer Mounted Telescopic Rig - For Sale
2011 Rebuilt National 650HP Rig
650HP National Land Drilling Rig for Sale

-----------------------------------------------------------------
 
1600bhp Twin Screw Tug
Worldoils Marketplace
1600bhp Twin Screw Tug

Worldrigs ID: WR388

Twin Screw Tug For sale
1600HP Twin Screw Tug For sale
Used Twin Screw Tug For Sale


Type : Steel Twin Screw Tugboat
Built : 2001
Classification : NKK

LOA : 27.00 M
Registered Length : 25.82 M
Registered Breadth : 8.50 M
Registered Depth : 4.15 M
GRT / NRT : 217 / 66 Tons
Bollard Pull : 20 T

Main Engine :
2 X 800 HP Yanmar 6N165-EN @ 1400 rpm with Kort Nozzle
Estimated Speed : 10 knots
Aux Generator : 2 X 40 KW / 50 HZ Perkins Model: LJ35009-T4.236

Fuel Oil Capacity : 185 M3
Fresh Water Capacity : 45 M3
Ballast Capacity : 29 M3
Accommodation : 12 Crew

Navigation Equipment :
Marine Radar – JRC JMA-2253
GPS Navigator – Furuno GP-31
SSB MF / HF Marine Transceiver – Furuno FS-1503
VHF Marine Radio – Icom M IC-M45
VHF Marine Radio – Furuno FM-27
Color Fish Finder – Furuno FF-35
Navtex Receiver – Furuno NX-500
Magnetic Compass – Daiko

Towing Winch :
20 Tons Capacity with Holding Brake 60 Tons

Sewage Treatment Plan : Capacity - 15 persons

Fresh Water Maker : Yes

Air Condition :
Wheelhouse, Capt Cabin, C/E Cabin and Crew Compartment

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------------------
Search words(for official use only) :
Twin Screw Tug For sale
1600bhp Twin Screw Towing Tug for Sale
Used Towing Tug for sale in Asia
Towing Tug for sale
Towing Tug for sale in Singapore
1600 bhp Twin Screw Tug
Towing Tug from Malaysia

-------------------------------------------------------------------------------------------------------

 

Land Drilling Rig for Sale
Worldoils Marketplace
Land Drilling Rig for Sale

Worldrigs ID: WR2755

Corsair 550 HP Rig for Sale
Carrier Mounted Corsair 550HP Rig for Sale


General Description

Estimated Drilling Depth : 7,200 ft
Estimated Rig Move Loads : 44
Estimated Camp Move Loads : 35
Rated HP : 550

Mast
Height : 107.00 ft
Static Hook Load Capacity : 297,000 lbs
Mast Racking Capacity : 6,560 ft

Substructure
Style : Monobloc
Height : 12.92 ft
Clear Height : 10.36 ft
Casing Capacity : 297,000 lbs
Maximum Setback Load (lbs) : 198,000

Drawworks

Make : Corsair
Model : W5384E
Power Rating : 550hp
Input Power : 1 ea Caterpillar D3408
Drilling Line Size : 1"
Auxillary Brake : Parmac Inc D631974-X

Top Drive / Power Swivel

No Top Drive

Swivel
Make : Oilwell
Model : PC-150
Capacity : 150 Ton

Rotary Table
Make : Gardner Denver 17.5
Table Opening : 17 ½"
Maximum Load Rating : 150 Ton

Power Generation
Mechanical Rig

Enchancements
Power Slip Frame : Upetrom

Mud System
Mud Pumps : 2 ea Upetrom 3PN-1000
Power Rating : 1,000 hp @ 150 spm
Pressure Rating : 5,000 psi
Active Mud Volume : 1,060 bbls
Reserve Mud Volume : 117 bbls
Shale Shakers : 1 ea MI Swaco Mongoose
Mud Cleaner : N/A
Desander : N/A
Desilter : N/A
Centrifuge : N/A

Well Control
Annular : 13 5/8"  3,000 psi, Upetrom

Double Ram Preventer :
13 5/8"  3,000 psi, Upetrom,
9" 3,000 psi, Upetrom

BOP closing Unit : Upetrom

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------
Search words (for official use only) :
Corsair 550 HP Rig for Sale
Carrier Mounted Corsair 550HP Rig for Sale
Telescopic Mast Land Drilling Rig - For Sale
Mechanical Rig - Corsair 550HP - For sale
Land Drilling Rig for Sale

-----------------------------------------------------------------
 
Foremost DR-24 Drilling Rig for Sale
Worldoils Marketplace
Foremost DR-24 Drilling Rig for Sale

Worldrigs ID: WR2758

Foremost DR-24 Drilling Rig for Sale
Drilling Rig - Foremost DR-24 - For Sale

Model : DR-24 Drill Rig
Manufacturer : Foremost Barber
Year : 2001
Condition : Used

Description :

2001 Foremost DR-24 Drill Rig
Mounted on 2001 Freightliner Truck
Caterpillar C-15 Diesel Engine (rated 500 HP)
4,100 Hours as of 10/16/20
Atlas Copco 900 cfm / 350 psi Air Compressor
24” Diameter Dual Rotary Power Head
Set up for 2-7/8" IF Drill Rod and 6” Beco Rod
4 piston FMC Bean water injection pump

Oil injection system
Jaws 6, 8, 10, 12, 14, 16, 18, 20, 24 inch
Welding (Cage) Clamp 6, 8, 10, 12, 14, 16, 18, 20, 24 inch
Divertor for 4-1/2 inch Drill Rod with adaptors for 6, 8, 10,
12 inch casings
Divertor for 10-3/4 inch drill rod with adaptors for 12, 14, 16, 18,
20, 24 inch casings
Drive Shoes 6, 8, 10, 12, 14, 16, 18, 20, 24 inch
24 - 4-1/2 inch x 20 ft x 2-7/8 IF thread drill rods
6 - 10-3/4 x 20 ft x 6-5/8 Beco thread drill rods
1 – 10-3/4 x 15ft x 6-5/8 Beco thread drill rod
1 - 10-3/4 x 10ft x 6-5/8 Beco thread drill rod
2 – 10-3/4 x 5ft x 6-5/8 Beco thread drill rods
New Miller Welder

Oxy/Acetalene Torch Setup
1 – Petol wrench setup for 4-1/2" Inch drill rod and 6 inch hammer
1 – Petol wrench setup for 6-inch drill rod and 8 inch hammer
6” IR QL60 Drill Hammer with 4-1/2” x 15ft heavy wall lead steel with bit
8” IR QL80 Drill Hammer with 6” x 15ft lead steel with bit
IR QL120 Drill Hammer with 10-3/4" lead steel and subs and
12” bit 12ft - QL120 Bit
2-7/8" IF x 4-1/2" centralizer drill rod for 10" inch casing
24" Inch over the hammer centralizer for QL120 hammer
Cyclone diverter
5 Inch Concrete Discharges Hoses 15 ft
5 Inch Concrete Discharges Hoses 25 ft

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Foremost Barber DR-24 Drilling Rig - 2001 Built for Sale
Used Drilling Rig - Foremost Barber DR-24
2001 Built Foremost Barber DR-24 Drilling Rig
Land Drilling Rig - Foremost Barber - For Sale
Foremost Barber Used Drilling Rig for Sale in USA

-------------------------------------------------------------------------------------------------------
 
Maintenance Work Vessel for Sale - 75m 4400hp
Worldoils Marketplace
Maintenance Work Vessel for Sale - 75m 4400hp

Worldrigs ID: WR479

Maintenance Work Vessel for Sale
Offshore Maintenance Vessel for Sale
Maintenance Work Vessel for Sale - 75m 4400hp
4400hp Maintenance Work Vessel for Sale
Offshore Work Vessel for Sale

75m / 4400hp maintenance work vessel

Principal Particulars
Built : 2010
GRT/NRT : abt 3661/1098
Class : ABS
Notation :
ABS + A1, + AMS, (E) offshore support vessel,
DPS1, SPS code
Call sign : TBA

Dimensions
Length overall :75.00m
Length WL : 72.20m
Breadth Moulded : 20.40m
Depth moulded : 7.00m
Draft moulded : 5.50m
Deadweight : 2,609m/tons
Loaded draft : 5.20m

Machinery
Main engines : Wartsila 8L20, 2 x 1600kW at 1000 rpm
Gear box : Wartsila gear SCV50 ratio approx 4.42 : 1
Main genset : Caterpillar 3412C, 4 x 500ekW/415V/3ph/50Hz
Emergency genset : Caterpillar C4.4DIT, 84ekW/415V/3ph/50Hz
Bow thruster : Kawasaki, KT-88B3 CPP, thrust = 10
Propellers : LIPS, CPP Dia. 2200mm
Rudders : Becker high lift rudder
Stabilization system : Flume stabilization systems
Dynamic positioning system :
Marine Tech (MT), ABS DPS1 c/w independent Joystick

Capacities
Deck strength : 5 tonnes/sqm
Clear deck area : 650 sqm
FW tank : 774 cu.m
Fresh water tank : 700 cbm
Fuel oil tank : 998 cu.m
Lube oil storage : 18 cbm
Sewage holding tank : 15 cbm
Dirty oil tank : 15 cbm
Hydraulic oil tank : 15 cbm

Performance
Performance speed : 13 knots (90% MCR)
Type of fuel : MGO
Endurance : 50 days approx

Discharge Rates :
Fuel oil : 1 x 38 cbm/hr at 18m head
Potatble water : 1 x 60 cbm/hr at 40m head

Accommodation
Crews :
6 x 1 man cabins = 6 men
7 x 2 men cabins = 14 men
25 x 4 men cabins = 100 men
Total : 120 men cabins
Hospital : Two man hospital
Fully airconditioned

Deck Area
Deck cargo bay : TBA
Deck strength : As above
Clear deck area : As above
Deck cargo : 635m/tons

Radio & Navigation Equipment
GMDSS : for area 3 comprising :
SSB radio : 1 uit
Inmarset C : 1 unit
VHF radio : 2 units
Radar : 2 units
Echo sounder : 1 unit
Gyro compass : 2 units
Autopilot : 1 unit
Magnetic compass : 1 unit
Speed log : 1 unit
Navtex receiver : 1 unit
SART : 2 units
GPS : 1 unit
AIS : 1 unit
Satellite EPIRB : 1 unit
Portable VHF radios : 3 units
Weather fax : 1 unit
VDR : 1 unit
Inmarsat mini 'M' : 1 unit
Vessel also fitted with PA system, sound powered telephone system
and integrated internal communication system

Deck Machinery / Mooring System
Four (4) Point Anchor Type
Hydraulic mooring winch : Titan, single drum c/w spooling device
Drum capacity : 1500m length dia 38mm SWR
Brake holding (1st layer) : 100mt (Static)
Duty pull (1st layer) :
40mt x 0 ~ 10m/min
10mt x 0 ~ 30m/min
Type of operation : Electro-hydraulic
Tuggers : 2 x 10t @ 15m/min
Capstans : 2 x 5t @ 15m/min
Anchor windlass : 1 x 9.3t @ 9m/min, 48mm chain

Fire-Fighting Equipment
Firemain : 1 x firemain with 19 hydrants c/w 15m hoses
Fireman outfit : 2 complete fireman's outfit to SOLAS requirement
Fixed CO2 system : For engine room
Water mist system : For paint store
Fire pump @ fwd machinery 1 x 60 cbm/hr @ 60m hd room
Fire detection and alarm system in living spaces and engine room

Life Saving Equipment
Liferaft : 15men x 2 units
Lifebuoy : SOLAS standard, 8 nos
Life jackets : 150 nos.
Rescue boat : 1 x 6 men acc SOLAS
Liferboat : 2 x 60 men

Others
Water maker : 2 x 20 tons/day Reverse Osmosis Type (RO)
Sewage treatment plant : 1 x 120 men
Deck crane :
1 x Favelle Favco Lattice boom pedestal
crane 40mt - type API specs 2C
Oily water separator : 1 x 1 cbm/hr
Provision crane : Titan, 1 x 2T @ 12m outreach
Moonpool : L5M x W4.8m

Price & terms : Please enquire using the email form below

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
-------------------------------------------------------------------------------------------------------------------------------------------
Search words(for official use only) -  
Maintenance Work Vessel For Sale
4400hp Maintenance Work Vessel For Sale
75M Maintenance Work Vessel For Sale in Middle East
Maintenance Work Vessel For Sale in Nigeria, West Africa
75M Maintenance Work Vessel For Sale in South America

4400hp Maintenance Work Vessel For Sale worldwide
Maintenance Work Vessel For Sale in Asia, Singapore, Malaysia

---------------------------------------------------------------------------------------------------------------------------------------------

Yacht Scale Model
Worldoils Marketplace
Yacht Scale Model

Worldrigs ID: WR246

Boat Models
Scale Yacht Models
International Models - Yachts


We make all kinds of International models as follows :
Ship scale models
Engineering scale models
Rig scale models
Offshore vessel models
Yacht Models

We can custom build any ship and any scale such as :
1:500
1:400
1:300
1:200
Other scales also

We can build made-to-order models

Please see clear photos on : http://www.worldoils.com/models/models.php

If you are interested in the models, please contact us on email address : mail@worldoils.com

--------------------------------------------------------------------------------------------
Search Words (for official use only) :
Gift Yacht Models
International Yacht Models
Gift Boat Models
Scale Models of Yachts
Pleasure Boat Models
Yacht Models for sale

---------------------------------------------------------------------------------------------
 
CTU for Sale
Worldoils Marketplace
CTU for Sale

Worldrigs ID: WR435

Coiled Tubing Unit for Sale
CTU for Sale

2013 Built Trailer Mounted Coiled Tubing Unit

1.0 General Description
1.1 All components are brand new and not used.
1.2 All equipment has reasonable load distributing. The whole equipment has
the capacity of shock resistance and rough road running. The unit is suitable
for driving in rough terrain of oil fields and common highway.
1.3 Control system, instrument box and related devices have nice sealing performance,
water proof and shock resistance.
1.4 All equipment is capable of operation in ambient temperatures of -30°C to 45°C.
1.5 All equipment is located reasonable, which is easy for operation, checking and
maintenance, caution marks for deck equipment and completed protection device for
uncovered running components and high temperature components. All discharging ports
point to safety position and are built under standard of HSE.
1.6 All related documents will be provided.
1.7 All equipment is built under the quality standards of API/ASME/NEC/ISO.
1.8 All equipment is well designed and constructed for safety operation of operators. Welding
department should have nice quality and enough strength. Self-lock nuts should be use as
much as possible.
1.9 All electrical circuits have code marks and all hoses have S/No. labels, which is easy
for connection with related connector.
1.10 All hoses and electrical wires are packed steadily, complete with clips for support
and fasten.

2.0 General Structure and Technical Specification

Components
Specification
Qty
Trailer
four axle trailer
1
Power Pack Engine
1
Control Cabin
Closed Type
1
Injector
ZRT-80K, with 100gooseneck
1
Reel Assembly
LGGT150”-78”-78
1
Injector Control Hose
40m (130ft)
1
Injector Power Hose
40m (130ft)
1
BOP Control Hose
40m (130ft)
1
Hydraulic System
 
1
Air Circuit System
 
1
Stripper
4.0610000psi
1
BOP
4.0610000psi
1
Electrical System
 
1
Lubrication System
 
1
Digital Data Acquisition
 
1

 The Trailer Mounted Coiled Tubing Unit is composed of four axle trailer,hydraulic system,
reel, power pack,injector, injector control hose reel, injector power hose reel, lubrication system,
electrical system, control system, instrument control cabin, wellhead control equipments
and so on. The Trailer Mounted Coiled Tubing Unit is used for many oilfield services applications
like gas lift, acidizing , fracturing and so on.The operation of the Trailer Mounted
Coiled Tubing Unitis centralized in or around the control panel in control cabin, which can ensure
the operator can easily and clearly monitor all control switches, instruments and the working
condition for all systems. Lights are installed above the reel and engine, which are easy
for night working.

CTU Performance Parameters :

 
Injector Continuous Pulling Capacity
 
80,000 lbs (36,000Kg)


Injector Continuous Snubbing


Capacity

 
40,000 lbs (18,000Kg)
 
Max. Speed of the Coil Tubing

190ft/min(58m/min
Total Weight
Approx. 39,000kg(86,000 lbs)
(without tubing and tractor)
Overall Dimension(L×W×H)


A
pprox.16,000mm × 2,600mm × 4,450mm
(630in × 102in ×175in) (without Tractor)
 
 

3.0 Trailer
Frame Rating : 66,000kg (145,500lbs) maximum capacity without trailer
Dimensions : 15,240mm(length) X 2,600mm(width) (600in X 102in)
Gooseneck : 3.5? kingpin
Axles : four axles, 22,700 Lbs /axle. capacity
Tires : sixteen (16):275/70 R22.5
Other : equipped with ABS
Voltage : 12V

4.0 Power Pack
DDC S60 turbocharged diesel engine,525hp@2100rpm,4 stroke, 6 cylinder,
detailed specification is as following :
- Electronic Engine Management System
- Equipped with starter(Anti-explosive battery. Air starter for diesel lubrication of starting device
and 30 gal air receiver tank?12 CF air compressor fixed with engine.Alternator
- Horizontal muffler,with rain cap
- Heavy duty air cleaners (for desert) with restriction indicator
- Equipped with emergency kill
- Bendix 0.37m3/min air compressor and air system that will include an air receiver, air dryer,
water separator, air filter, bleed valves, check valves, control valves, gauges and hoses.
Air compressor will maintain 0.8 Mpa in the air receiver tank.In addition, a connection will be
provided for remote charging of the air tank.
- Spark arrestor and Emergency shut off system
- Diesel oil tank Volume: 500L
- Hydraulic system:
- Main hydraulic system: injector is driven by variable displacement, axial hydraulic pumps.
- Tubing reel driven hydraulic system: independent hydraulic pump will provide power
for the coiled tubing reel drive motor.

- Auxiliary hydraulic system: separate pressure compensating pump provides power
for following system :
hose reel hydraulic motor, level wind hydraulic motor, level wind lifting  hydraulic cylinder,
injector traction and tension system, BOP control system.
Level wind compelling hydraulic motor
Level wind height control hydraulic cylinder
Flexible Hose hydraulic motor
Control cabin lifting cylinder
BOP hydraulic cylinder
Injector chain tension system
Injector chain traction system
Injector speed adjustment system

Handle pump system: handle pump system is installed in control cabin, which is used
to provide emergency power for BOP ram, stripper and injector chain traction system
- Energy accumulator system: this system is installed in hydraulic power pack.
4 high pressure nitrogen reservoirs can provide spare power for BOP control system.
- The capacity of each accumulator is 10 gallons ( 37.85L)
- Except above mentioned parts, the hydraulic system also contains followings :
Hydraulic Oil tank with temperature gauge and level indicator.
Gauges of hydraulic pressure
Oil cooling system
Hydraulic system returning loop filter
Necessary pressure relief valve, safety valve and hydraulic hose
- The hydraulic power pack is skid mounted and has a four point lift protective frame.
- Carbon steel hydraulic oil tank capacity: 650L

5.0 Control Cabin
- The unit will be fully operational from the operator’s control cabin with the use of
mechanical, hydraulic and pneumatic controls.
- The control cabin will have four hydraulically lift cylinders to elevate the cabin for
ease of visibility over the tubing reel.
- Long type control cabin. The long type cabin is professionally designed for quiet
comfort and to provide a safe operating environment for the operator and customer.
- This control cabin design will feature :
- Door will have heavy duty lockable latch
- Safety glass installed on all four sides of control cabin : front window with safety
guard screen and windscreen wiper,  the back side door with fixed  window and 
both sides supplied with large area emergency slide windows
- A complete lighting and electrical system with all necessary plugs and switches
will be installed.
- Operator’s chairs, etc. will be installed in the control cabin.
- Heavy-duty rubber insulated floor covering, fire resistant.
- The Control Cabin will be heated and cooled by a high capacity rear mount air
conditioning and heating unit. The air conditioning and heating unit shall provide
adequate cooling and heating for the operating temperature range of the unit.
- Four (4) flood work lights will be installed on the outside of the
Control Cabin (two (2) at the rear facing the tubing reel and
two (2) in the front).

- Standard equipment in the control cabin will be :
Stainless steel console and panels
- LED Internal indirect lighting system
- Captain’s chair mounted behind control console
- Control cabin is equipped with external alarm horn controlled from the
control cabin.
- All hydraulic connections to and from the control cabin will be via a
hydraulic bulkhead.
- An air driven pump used to deliver 5,000 psi to the stripper over the 3000 psi system
pressure. This pump also has a handle and can be used as a second
manual back-up pump.
- A full control console will be installed in this cabin. This console will be of
stainless steel construction and be fully labeled with all gauge and control information.
The panel will be mounted on an engineered fabricated housing that incorporates the
back-up pump, hydraulic valves, interface, etc.

- The following controls and gauges will be installed in this control console:
Weight indicator to be Metric (Kilograms) and pounds
Well head pressure gauge in Megapascals or PSI
Circulation pressure gauge in Megapascals or PSI

Engine controls and gauges :
Engine EDM Display Module to provide the following information :
tachometer/hourmeter readout
engine oil pressure & temperature readouts
water (coolant) temperature readouts
Engine throttle
Engine normal stop
Engine emergency stop
System air pressure
Fuel level gauge

- Injector controls :
In/out control hydraulic joystick with friction detent
- Speed control regulator valve for maximum and minimum injector motor
displacement contr
- Three sets of the traction circuit valves to secure the traction of the coiled tubing.
These valves are indicated as upper, middle and lower allowing
- Each traction control valve has an individual pressure gauge
- Traction pressure regulator valve with regulated pressure indicator
- Chain tension control valve with individual pressure indication, “Pressure,
Run and Dump”
- Chain tension regulator valve
- Injector drive pressure gauge glycerin filled
- Injector Emergency Brake control

BOP controls :
- BOP ram/auxiliary control bank valve – quantity of nine (9).
- BOP safety control valve
- Stripper packer hydraulic control valve and a quantity of two (2) pressure gauges
- Installed at base of control panel will be two (2) hydraulic hand pumps
with auxiliary hydraulic reservoirs
- Tubing reel controls and gauges :
Tubing weight indicator
Tubing reel tension (speed) control valve
Tubing lubricator control
Additional cabin controls and information:
Light switch
All pressure gauges to be Metric (Megapascals) or PSI

6.0 Tubing Reel
Tubing reel is installed in the trailer and adopts embedded structure. The parameters are :
Tubing Reel Flange O.D. – 150″
Core Dia. of Drum: – 78″
Tubing Reel Width – 78″
Max. Reel Capacity 2″– 6300m

Reel Support Frame
The reel supports are fixed a-frames that are skid mounted and attached to the trailer
via pins. Each a-frame includes a bearing carrier which is pad mounted on the top
each a-frame upright to provide spool change capability. This feature allows the reel
to be either raised out of or lowered into operating position from one location.

Reel Drive
The driving system of the tubing reel includes motor and gearbox, which are installed
on the road side of the trailer. Complete with one quick joints connection plate, which
is easy for the connection of the reel and hydraulic power.

Rotating Joint and High Pressure Manifold
The high pressure manifold includes swivel joint, piping. Rotating swivel joint and
piping will have a maximum working pressure of 15,000 psi, integral figure 1502 union
will be flanged to inside of pump-through shaft for connection to tubing.
Level Wind :
Level wind assembly will allow tubing angle to vary from a minimum of 10° up to a
maximum of 85° elevation (from horizontal), and is raised and lowered via
hydraulic cylinders. Pivoting guide is designed to allow easy tubing installation.
Pivoting guide can be used with either mechanical or electronic encoder for
counting tubing depth metering. The tubing counter will adopt a “V” Roller design
to accommodate tubing sizes from 1 ¼″to 2 7/8″O.D. tubing. The mechanically
controlled level wind system will track down from 1 ¼″to 2 7/8″ tubing during
pay-in / pay-out operations and includes a manual override control.
Lubrication System :
A remote control pneumatic tubing lubrication system mounted at the rear of the
counter. The lube oil reservoir is located between the tubing reel and power hose reel.

7.0 Hydraulic Power Hose Reel and Hose
- One BOP control hose reel has 20 ports. Length of the control hose is 40 m (130 feet).
- One injector control hose reel has 20 ports. Length of the control hose is 40 m (130 feet).
- One injector power hose reel has 2 sets 1-1/2″X 40m (130 ft), 5000psi hose.
- This hose reel is hydraulic driven with local hydraulic control valve.

8.0 Injector Head
- Model:JR-ZRT80K
- Continuous Pull Capacity:80,000 lbs
- Continuous Snubbing Capacity:40,000 lbs
- Maximum Speed:190ft/min

Patent grippers adopt removable design. Suitable for coiled tubing size from 1.25″to3.5″.
This injector is capable of 2″OD Coiled Tubing.

- Out frame support can bear 90,000lbs snubbing or pulling load.
- Dual planetary gear transmissions are designed specifically for coiled tubing unit application.
- 2 sets of variable displacement, axial piston hydraulic motors.
- Counterbalance safety valves are installed in hydraulic motor or distribution manifold.

Modular brakes are mounted between the motors and gearboxes and are spring
applied/pressure released.

- All chain gears have induction high hardness gear.
- Spline top drive has fixed axis and chain gears.
- Inline bearing traction system is suitable for traction strength reaches top and
the grippers will have no dislocation.
- 3 sets(6 each traction oil cylinder adopt inside installation design.
- Pocket accumulator is installed in traction loop.
Injector chain lube system is activated by chain running. Completed with measuring pump
can realize best lubrication and less lube oil waste.
- Fold down walkways will be provided.
- A fall protection device will be provided on the injector
- 100″gooseneck

9.0 Wellhead Equipment (Optional)
All the wellhead control equipments are J&N make.

9.1 BOP -4.06"
For 2” Coiled Tubing
Working Pressure:10,000 PSI
H2S service. All metals in contact with well fluids per NACE MR-01-75
Top End:4.06” 10,000 BX-155 Studded Flange
Lower End:4.06” 10,000 BX-155 Open Flange
Side Outlet:2.06” 10,000 BX-152 Studded Flange

9.2 Side Door Stripper- 4.06"
For 2” Coiled Tubing
Working Pressure:10,000 PSI
H2S service. All metals in contact with well fluids per NACE MR-01-75

9.2 Side Door Stripper- 4.06"
For 2” Coiled Tubing
Working Pressure:10,000 PSI
H2S service. All metals in contact with well fluids per NACE MR-01-75

10.0 Digital Data Acquisition Package (CTDASP)
- JK-CTDASP integrates standard Coiled Tubing Data Acquisition System with a
personal computer interface and is preloaded with report software and designed
for operator convenience and portable applications in harsh oil field environments.
- This new system provides customers with a single integrated solution where
previously a DAS suitcase, a laptop PC computer and related software programs
were required to perform the same job.

- This CTDASP system, with the software that is installed is capable of 
accepting/processing the following data from the unit mounted sensors :
Coil Tubing Depth and Speed
Circulating Pressure
Well head pressure
Fluid Pumping Rate/Total
Any other additional information

- Data Acquisition Software have the following features:
Local real time data and time indication
Real-time recording
Append and pause files during operation
Multiple channels input
User-defined X-Axis
Zoom and scroll functions on graph
Elapsed time and reset
Process real time/replay data

10.1 Software Function
- Display real time data by real time numerical value
- Display real time data by curve
- Download historical data in memory card
- Separate historical data into different data document according to time interval
- Display curve by horizontal and vertical ordinate, user can choose favorite one
- Check data easily: the real time data and historical data display by curve and data
- Dynamic loading historic data, reappear site job condition
- Easy for choosing coordinate axis
- Coordinate axis can be added and deleted, no effect for data curve
- Data curve can be adjusted to display and hide, easy for data analysis
- Coordinate axis can be zoomed and rolled, check data curve by rolling coordinate axis
- Supply command of Zoom to Fit for all coordinate axis
- In support of common printer, as well virtual PDF printer, can print curve and 
data into PDF Form

11.0 Painting
Procedure:
- All steel parts will be sand blasted to white metal
- Primer will be zinc rich
- Middle paint
- Surface will be industrial polyurethane paint
- The painting color will be confirmed by customer. the control cabin color is white

12.0 Documentations
- Operation and maintenance manual for skid mounted coiled tubing unit.
- OEM Operation and maintenance manual for diesel engine.
- Manufacturer’s installation operation and maintenance literature for all CTU’s major parts.
- Qualified certificate of equipment conformance to customer specifications.
- Qualified inspection certificate of equipment.

13.0 Tools and Spare Parts
Digital Multimeter 1 Pc
13 pieces electron tools kid 1 Set
Metric Combination Wrenches Kit (8-24mm ) 1 Set
English Combination Wrenches Kit(1/4"-7/8" ) 1 Set
Metric Inner Hexagon Spanner Kit(1.5-14mm) 1 Set
English Inner Hexagon Spanner Kit(1/16”-3/8”) 1 Set
Monkey Wrench(12”) 1 Pc
Special Handle Grease Gun 1 Pc
Hydraulic Oil Tank Return Oil Filter Element 1 Set
Hydraulic Oil Tank Suction Filter 1 Set
Engine Oil Filter 1 Set
Engine Diesel Filter 2 Set
Engine Air Filter 1 Set

14.0 Warranty
Warranty period for the unit is one year (from the day the unit arrived at the customer’s).

15.0 After sales services
We will provide After-Sales Service in the capacity of spare parts procurement.
In the event that parts become obsolete, We will assist in locating suitable replacements.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed

--------------------------------------------------------------------------------------------------------------------
Search words(for official use only) - 
CT Unit for Sale
2013 Built CTU for Sale
Trailer Mounted Coiled Tubing Unit
Coiled Tubing Unit 2013 Built for Sale
 
--------------------------------------------------------------------------------------------------------

 
Cooper 350 Mechanical Rig for Sale
Worldoils Marketplace
Cooper 350 Mechanical Rig for Sale

Worldrigs ID: WR2753

Cooper 350 Mechanical Drilling Rig
350HP Trailer Mounted Land Drilling Rig for sale


General Description
Make : Cooper
Estimated Drilling Depth : 5,000ft
Estimated Rig Move Loads : 38
Estimated Camp Move Loads : 35
Rated HP : 350

Mast
Height : 104.00 ft
Static Hook Load Capacity : 176,000 lbs
Mast Racking Capacity : 3,600 ft

Substructure
Style : Telescoping
Height : 12.92 ft
Clear Height : 9.82 ft
Casing Capacity : 176,000 lbs
Maximum Setback Load (lbs). : 132,000

Drawworks
Make : Cooper
Model : 4210-3808
Power Rating : 350 hp
Input Power : 1 ea Caterpillar
Drilling Line Size : 1"
Auxillary Brake : Parmac 122

Top Drive / power Swivel : No Top Drive

Swivel
Make : Upetrom
Model : CH 125
Capacity : 125 Ton

Rotary Table
Make : Ideco 17.5
Table Opening : 17 1/2
Maximum Load Rating : 150 ton

Power Generation
Mechanical Rig

Mud System
Mud Pumps : 1 ea Gardner Denver 1PY-172
Power Rating : 1,000 hp @ 130 spm
Pressure Rating : 5,000 psi
Active Mud Volume : 906 bbls
Reserve Mud Volume : 101 bbls
Shale Shakers : 1 ea Upetrom
Mud Cleaner : N/A
Desander : Upetrom 2" X 12 Cones
Desilter : Upetrom 3" X 6 Cones
Centrifuge :  : N/A

Well Control
BOP Closing Unit : Upetrom

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------
Search words (for official use only) :
Cooper 350 Mechanical Drilling Rig
350HP Trailer Mounted Land Drilling Rig for sale
Cooper 350 - Telescopic Mast Rig for sale
Land Drilling Rig for Sale
Mechanical Rig for Sale

------------------------------------------------------------------------
Bulk Carrier For Sale
Worldoils Marketplace
Bulk Carrier For Sale

Worldrigs ID: WR129

2500T DWT Bulk Carrier for Sale

Description


DWT :  2500 tons
Built : 1986
Class :  ZC

GRT/NRT : 1505 / 959  tons
Loa X Lbp X B X D : 76.00 x 70.00 x 12.00 x  6.00 m
Draft : 4.95 m
Grain / Bale : 3500.70 CBM / 3230.80 CBM
Ho / Ha :  1/1
Hatch size : 42.00m x 8.00 m
Hatch Cover :  Steel
M/E :  HANSHIN 6LU28A,  1320ps@ 395 rpm
Consumption : CST120, 2.8 tons / day
Generator : (2 sets)Yanmar 6KFL-HT  220PS  440V144KW
Consumption : MDO  0.3 tons / day
Speed : 10 knots

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

------------------------------------------------------------------------
Search words(for official use only) : 
Bulk Carrier 2500T DWT For Sale
Bulk Ship For sale
1986 Built Bulk Carrier for Sale
Bulk Carrier for Sale
Bulk Ship 1986 Built For Sale

-------------------------------------------------------------------------

 
Offshore Accommodation Module with Helideck for Sale.
Worldoils Marketplace
Offshore Accommodation Module with Helideck for Sale.

Worldrigs ID: WR486

Offshore Accommodation Module with Helideck for Sale
Accommodation module including helideck for 50 persons
New Accommodation with Helideck For Sale

 
Technical specifications :
Accommodation module including top mounted helideck.
The accommodation module is designed and built for 50 persons but can be modified
on request.
This technical specification describes the scope of delivery of the complete
accommodation module.
4-level accommodation module for 50 persons
Complete steel structure. Total weight of module is approx. 551 tonnes
Dimensions (LxBxH): 20.8 m x 10.8 m x 20,3 m (excl stairways/platform)
15 cabins for 2 persons (12,2/9,25 m2)*
5 cabins for 4 persons (13,9/10 m2)*
Aluminum Helicopter deck on top of module designed for Sikorsky S-61N
Fully equipped
Classified as “SAFE AREA”
Classification and verification by Lloyds Register  
 
General
Design criteria
The design of the module is based on the following international rules, regulations
and specifications :
SOLAS – consolidated edition 2004
NMD regulations for Mobile Offshore Units
Lloyd’s Register of Shipping; MOU
International Maritime Organization (IMO) 1982 ed.
IMO Resolution A.486 (XII)
International Electrical Code (IEC)
DNV-OS-C101 (Structural only)
Purpose specific criteria for oa HVAC, Safety design philosophy, Living Quarter and
Helicopter-deck specification,
General design and outfitting.
 
Classification
Classification and verification by Lloyds Register The accommodation module is classified
as a ”SAFE AREA”. The full envelop of the accommodation module is fire rated for
a hydrocarbonfree environment.
 
Geometry
The footprint of the Accommodation module (excluding walkways and landing platform) is
20.8 m x 10.8 m.
The lay down area adds another 8 meters to the length.
Height from base to top of 4th level is 15.15m. Overall height including Helicopter deck is
20.3m from base.
The module is designed to be supported on minimum four points with footprint
12,0m x 10,5m.
The total weight of the module is 551 metric tons.
 
General Layout
The module comprises of four accommodation levels.
The base level has a lay-down area for two 10 feet containers.
On the roof level are located a plant room and a Local Equipment Room (LER).
On top is an aluminum helicopter deck. Two stair towers are fitted; one on each side
of the module.
All utility connections are located at the bottom of the utility shaft and in the control
room/ LER,allowing for easy hook-up of systems. Levels have following general layout :
Level 1 : Galley, Mess room, Cold store etc.
Level 2 : Cabins
Level 3 : Cabins
Level 4 : Control room, offices, and recreation rooms.
 
Documentation
The accommodation module will be delivered with complete as-built documentation
package includingoa drawings, test reports, certificates, weight report, Installation
& Operation Manual.
 
Structural
General
The accommodation module is designed and constructed as a four level building with a
plant room and LER at roof level. The helideck support structure is an integrated part of
the module’s skeleton. Two exterior stair towers are provided from 1st level to helideck
level. Roof and lay down area are provided with railing.
Primary steel is S335 J2G3 and secondary steel S235 J2 (with appropriate certification).
Accommodation is fully welded by qualified welders and in accordance with approved
welding procedures. 10% (random) MPI is executed on major beams.
 
Helideck
The helicopter deck is constructed from seawater resistant aluminum and has an
octagonal shape inscribed in a circle of 22.2 meter. It is fitted with safety netting and a
drain gutter around its perimeter. The support structure is constructed of hot rolled carbon
steel beams. The helicopter deck is certified for a Sikorsky S61N.
 
Lifting arrangement
The accommodation module and helideck can be lifted as one module. The 551 tonnes
module is lifted from lifting points at the top of the accommodation structure (roof). The
aluminium helideck is executed with hatches to accommodate access for the lifting gear.
Lifting columns and eyes are 100% MPI inspected.
 
Protective coating
All steel is blasted to SA 2½ and coated in shop primer. External steel is coated with
3-layer International® system; internal steel is coated with a 1-layer system.
 
Architectural
General specification
Inside of bulkheads and decks are provided with insulation and applied with interior wall
panels where applicable. Floors (steel or insulation tiles) are applied with levelling screed
and finished with either vinyl or seamless epoxy (in “wet” areas). All rooms are provided
with a cassette type false ceiling system. Windows are welded marine type and provided
with roller blinds or curtains. Internal stairway reaching from 1st to 4th level provided with
St.st. handrail on both sides.
 
Layout
The layout of the accommodation is as described below. Please find attached layouts for
more details. Complete inventory list is available.
 
Level 1
Locker room male
Locker rooms with 52 steel lockers, benches, hand wash basin, one shower, a urinal and
two toilets
Locker room Female
Locker room with 10 steel lockers, a bench, hand wash basin, one shower and one toilet.
Tea Room
Tea room (12 m2) with benches, a phone booth and a Kitchenette.
Mess Room
Mess room (45 m2) with 4 off 6-person tables, a serving counter, lockable cupboard and
overhead screen.
 
Level 2
Laundry
Laundry room (12,0 m2) with oa washing machine, tumble dryer, ironing board, washing
bin and shelves
Fitness
Fitness area (12 m2) . Fitness equipment not part of delivery.
Linen Store
Linen store room (4 m2) with steel shelving.
Fireman’s Outfit store
In corridor next to stairway.
10 x 2-Persons Cabins
10 off 2-person cabins (9,25 m2 excl bathroom), each cabin fitted with a double bunk bed,
a desk (1.4 x 0.6 m) with chair, an easy chair, a cupboard, a locker for immersion suit and
a bathroom.
 
Level 3
Health Office
Health office (14,7 m2) with desk, chair, bathroom, cupboard, inflatable bath, medicine
cupboard, examining couch and file cabinet
5 x 4-person cabin
5 off 4-person cabins (10 m2 excl bathroom), each cabin fitted with two double beds
(top is fold-away), a desk with chair, an easy chair, a cupboard, a locker for immersion suit
and a bathroom.
5 x 2-person cabin
5 off 2-person cabins (9,25 m2 excl bathroom), each cabin fitted with a double bunk bed, a
desk with chair, an easy chair, a cupboard, a locker for immersion suit and a bathroom.
Linen Store
Linen store room (4 m2) with steel shelving.
Fireman’s Outfit store
In corridor next to stairway.
2-person cabin
3D top view of 2 person cabin
Health office
4-person cabin

Level 4
Recreation Day room
Recreation day room (31 m2) with couches, easy chairs, coffee table, TV cupboard with
TV / DVD / Stereo,
book shelves with internet desk, phone booth and kitchenette with sink and mixing tap
Recreation Smokers Day room
Recreation smokers day room (25 m2) with couches, easy chairs, coffee table, TV cupboard
with TV / DVD / Stereo,book shelves with internet desk, phone booth and kitchenette with
sink and mixing tap
Control Room
L-shaped Control room (60 m2) with false floor (500 mm). Room is not outfitted at present.
Heli Lounge / Office
Office area (12 m2) with two desks with chair, two file cabinets and a cupboard for PSP.
Office 1
Office area (12 m2) with two desks with chair, a file cabinet and a white board.
Office 2
Office area (12 m2) with a corner desk with chair, a meeting table with six chairs, video
conferencing systemand a white board.
Toilets
Two separate toilets in the corridor.
Recreation day room
Control room with false floor
Heli lounge / office
Office / meeting room 

Safety & Fire Protection
Fire main system
A hose reel system is fitted throughout the accommodation at all levels. Two hose reels
per level and two hose reelsfor the helicopter deck. Fire water is to be supplied externally.
Fire & Smoke detecting system
On every level fire detectors and smoke detectors are installed
Portable extinguishers
Various classes A, B and C, (weights from 5 to 12kg) portable extinguishers are distributed
throughout the module.
For the helicopter deck 2 off 10 kg CO² extinguishers are provided.
Galley hood protection system
A “R-102” kitchen fire suppression system is installed in the galley hood and galley ducts.
Safety Signs
Safety signs (in the English language) and overall safety plan are installed inside the
accommodation module.
Corridors have fluorescent safety striping on low level.
Safety equipment
The module is fitted with the following safety equipment: Stretcher / 4 off Fireman outfit’s/
Supplement for firemen’soutfit / Helicopter deck rescue kit / First aid box / 4 off Eye wash
bottles / Fire blankets.
Helicopter deck foam system
A helicopter deck AFFF-foam system is installed. A twin agent 250 kg dry powder and
250 litres of concentrated foam are located near the helideck. (As per NMD)
Fire hose reel and fire detector in corridor
AFFF foam system near helideck
Stairway with st.st. handrailing and fluorescent striping

Price & terms : Please enquire using the email form below

If you cannot find the vessel, crane, rig or equipment that you need, please send us an
email to mail@worldoils.com stating your requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------
Search words (for official use only) - 
Offshore Accommodation Module with Helideck for Sale
Offshore Accommodation For Sale
Accommodation Block for Sale Accommodation with Helideck For Sale
Helideck for sale with the Accommodation module
Helideck for 50 persons for sale

-----------------------------------------------------------------------------------------

 
7000 cbm Trailer Hopper Suction Dredger For Sale
Worldoils Marketplace
7000 cbm Trailer Hopper Suction Dredger For Sale

Worldrigs ID: WR128

Trailer Hopper Suction Dredger for sale
7000cbm Dredger for sale

Description

7000 Cube Meter ZC Class Trailer Hopper Section Dredge-NB

Vessel’s Main Particulars
1. Length over all ~ 110.40m
2. Length bp 100.60m
3. Breadth mld 20.60m
4. Depth mld 8.50m
5. Design draught 5.50m
6. Dredging draught 6.80m
7. Soil load(in dredging condition) 7922t
8. Scanlting draght 7.7m
9. Deadweight at scanlting draught) 9696t
10. Max. dredging depth(Below light WL) 27m
11. Complement 36P
12. Main engine power 2×3088KW
13. Free Speed 12kn
14. Gross tonnage 5970
15. Height between decks:
16. Main deck to Poop deck 3.00m
17. Poop deck to Accomm. deck 2.70m
18. Accomm.deck to Boat deck 2.70m
19. Boat deck to Bridge deck 2.70m
20. Bridge deck to Compass deck 3.00m
21. Main deck to Forecastle deck appro. 3.00m
22. Hopper coaming 3.00m

Power Supply
1. Main Engine: 2 X G8320ZC18B 3088kW @ 650rpm Fuel: DO
2. Dredger pump engine: 2 X G6300ZC7B 1470 Kw @ 600rpm Fuel: DO
3. High pressure jet pump engine: 2 X XCW8200ZD 928 Kw @ 1000rp Fuel: DO
4. Diesel-generator: 3 X CCFJ396J-M10 400 Kw @ 1000rp Fuel: DO
5. Emergency: 1 X CCFJ120Y 120 Kw @ 1500rp Fuel: DO

Dredge Pump Parameter
1. Type: Changsha water pump manufacture co., ltd.---WNB1900(S)
2. parameter When Loading When Self-emptying
3. capacity 10300 m3/h 9000 m3/h
4. waterhead 21 m 32m
5. speed 255 r/min 300r/min
6. power 1000KW 1400KW
7. Suction pipe diameter DN800mm
8. discharge pipe diameter DN750mm

High Pressure Jet Pump
1. Two high pressure jet pump shall be equipped for draghead high pressure flushing
and sel-emptying . The jet pumps are as follows:
2. Capacity 3200m3/h
3. Waterhead 84m
4. Speed 1500r/min
5. Power of shaft 861.2KW
6. Suction pipe diameter DN500mm
7. Discharge pipe diameter DN400`mm

Design Load Capacity
1. Soil 7180.8t
2. Diesel oil 500t (max 1140.6t)
3. Lub. Oil 25t (max 89.6t)
4. Fresh water 180t (max 237.5t)
5. Supplies and stores 20t
6. Crew and luggage 5t
7. Provision 3t
8. Sewage 8t
9. Total 7921.8 t

Dredging Character

Maximum Dredging Depth
In light condition, suction pipe at 45 degree , the dredging depth is 27 m below light
water line.

1. Loading Time
Dredge middle hardness fine sand, depth 27m, with double suction pipe, the
charging time I-s approximate 65 minutes.

2. Dump Time
With jet water, dumping time is 5 minutes

3. Hopper Capacity
Maximum hopper capacity is 7203 cubic meters, the level of soil is below the hopper
coaming top 800mm.(overflow wier highest place)

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------------------------------------------------------------------------
Search words (for official use only) - 
7000cbm Trailer Hopper Suction Dredger 
Dredger for sale
Trailer Hopper Suction Dredger 7000cbm For Sale
----------------------------------------------------------------------------------------------------------------------------------

2000 Caterpillar 994D Wheel Loader for Sale
Worldoils Marketplace
2000 Caterpillar 994D Wheel Loader for Sale

Worldrigs ID: WR606

Caterpillar 994D Used Wheel Loader For Sale
2000 Built Mining Equipment - Caterpillar 994D Wheel Loader


Year : 2000
Manufacturer : CATERPILLAR
Model : 994D
Condition : Used

22 CYD BKT, 49.5-57 Tires, Good Unit
Hours : 53,508
Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------
Search words (for official use only) - 
Caterpillar 994D Used Wheel Loader for Sale
Mining Equipment Caterpillar Wheel Loader
Used Caterpillar Wheel Loader for Sale
Wheel Loader for Sale in USA
2000 Caterpillar 994D Used  Wheel Loader
Caterpillar Wheel Loader for Mining

-----------------------------------------------------------------


 
Victory Trailer Mounted Drilling Rig - 2009 Built - For Sale
Worldoils Marketplace
Victory Trailer Mounted Drilling Rig - 2009 Built - For Sale

Worldrigs ID: WR2754

Victory Trailer Mounted Telescopic Mast, Double Rig for Sale
Victory Trailer Mounted Drilling Rig - 2009 Built - For Sale


General Description                                           
Make : Victory               
Year Built/Rebuilt : 2009               
Estimated Drilling Depth : 12,000 ft               
Estimated Rig Move Loads : 48               
Estimated Camp Move Loads : 4               
Rated HP : 850               

Mast                                           
Height : 105.00 ft               
Static Hook Load Capacity : 350,000 lbs               
Mast Racking Capacity : 12,000 ft

Substructure                                           
Style : Telescoping                
Height : 20.00 ft               
Clear Height : 17.00 ft               
Casing Capacity : 440,000 lbs               
Maximum Setback Load (lbs) : 375,000   

Drawworks                                           
Make : TSM 
Power Rating : 850 hp                                                                                                     
Brake Type - Band or Disc : Disc                                           
Drilling Line Size : 1 1/8"                                           
Auxillary Brake : TSM 236H SSB 90#RL W/CVCP                                                                                        

Top Drive / Power Swivel
Make : Victory Rig Equipment
Model : VRT200H                                           
Capacity : 200 Ton                                               
Torque - Continuous : 16,000 ft-lb                                           
                                           
Swivel                                           
No Swivel                                           
                                           
Rotary Table                                           
Make : TSM 17.5                                           
Table Opening : 17 ½"                                       
Maximum Load Rating : 150 Ton                                               
                                       
Power Generation                                               
Engines : 3 ea Caterpillar C 32                   
Generators : 3 ea Caterpillar SR 4 B                   
SCR / VFD / DC/DC : VFD Rig                                               

Mud System                                               
Mud Pumps :
2 ea Weatherford Oil Tools MP-10
1,000 hp @ 140 spm                                   
Model : TSM 850                                                       
Pressure Rating : 5,000 psi                                   
Reserve Mud Volume : 0 bbls                                   
Shale Shakers : 2 ea MI Swaco Mongoose                                   
Mud Cleaner : N/A                                   
Desander : Brandt 10" X 2 Cones                               
Desilter : Brandt 5" X 16 Cones                               
Centrifuge : N/A                                   

Well Control               
Annular : 11" 5,000 psi, Doyles Valves,                                    
Single Ram Preventer :
11" 10,000 psi,
Doyles Valves, Type-U                                   
Choke Manifold :
Weatherford oil tools
4 1/16" 10,000 psi                                   
BOP Closing Unit :
T3 Energy Services
6 Station 3,000 psi"                                   

Enhancements 
Forklift : Caterpillar 930 H
Iron Roughneck : NOV ST-80 C   

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.
We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------------
Search words (for official use only) :                   
850HP Victory Trailer Mounted Telescopic Mast Drilling Rig
2009 Built Trailer Mounted Telescopic Mast Rig for Sale
Land Drilling Rig - Trailer Mounted for Sale                                           
Used Land Drilling Rig for Sale in Mexico
Victory Trailer Mounted 105ft Double Rig for Sale   
                                         
---------------------------------------------------------------------------------------------------------------
 
1500hp SCR Land Rig for sale (used)
Worldoils Marketplace
1500hp SCR Land Rig for sale (used)

Worldrigs ID: WR149

1500hp SCR Land Rig - Used and refurbished
National 110 UE Refurbished 1500HP SCR Rig
Refurbished 1500 HPSCR Land rig for sale


Specifications
NationalL 110 UE 1500HP Single Drum Drawworks p/b
(2) 1000 HP Apollo 752 DC Traction

Motors w/10HP Emerson Blower Assembly.

Mast :
SKYTOP 142’ Cantilever 1,000,000# Hook, Skytop Crown
Block w/ (6) Crown Sheave Cluster.

SUB : Skytop 28’W x 26’H x 72’L Swing
Up, 1,000,000#
Casing Load, 600,000# Setback.

Gen Sets :
(3) Kato 1050 KW AC Generator p/b CAT D399 Mounted on
10’W x 30’8”L Covered Skid.

SCR :
IDM 4Bay w/ (2) Eubank V7210733 Air Conditioners
w/9’2”L Porch, Mounted on 10’3”W x 29’2”L Skid.

Mud Pumps :
(2) LS NOI 1300 HP (10P130 Style) Triplex p/b (2)
Apollo 752 DC Traction Motors.

Mud System :
543 Bbl Suction Tank w/ 543
Bbl Shaker Tank and 543 Bbl
Mixing Tank all w/ (2) ODRILL/MCM Linear Motion Shale Shakers,
two 10” Cone Double Life Desander, eight 2” Desliters and
DRECO “Deep Pit” Degasser.

Rotary Table :
Mud King RT275 27
1/2” w/Split Master Bushings, p/b Apollo 752
Traction Motor w/Emerson 10 HP Blower Assembly.

Swivel :
Mud King 450Ton

Block/Hook :
Ideco 525
Ton Block/Hook Combination.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

------------------------------------------------------------------------------
Search words (for official use only) :

1500HP Electric Drilling Rig For Sale
Land Drilling Rig For Sale - 1500hp
1500hp SCR Land Drilling Rig For Sale
Used 1500 HP SCR Drilling Rig

------------------------------------------------------------------------------
Generator for Sale
Worldoils Marketplace
Generator for Sale

Worldrigs ID: WR521

Industrial Generator for Sale
Generator for Sale


Description
1 X Cat 3512 with remote radiator
1040 Kw
1500 RPM, 400V, 50 Hz 320 hours

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your requirements
and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

------------------------------------------------------------------------------------------------
Search words(for official use only) :
Industrial Generator for Sale
Generators for sale
Generator Cat 3512 with Remote Radiator for Sale

--------------------------------------------------------------------------------------------------
 
Caterpillar D9T Used Crawler Bulldozer for Sale
Worldoils Marketplace
Caterpillar D9T Used Crawler Bulldozer for Sale

Worldrigs ID: WR571

Caterpillar D9T Crawler Bulldozer
2005 Mining Equipment - Used Dozers for Sale


Year : 2005
Manufacturer : Caterpillar
Model : D9T
Condition : Used

EROPS, Dual Tilt, SU Blade, Fast Fuel, MS Ripper
Hours : 8,449

Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------------------------------
Search words(for official use only) -
Caterpillar D9T Dozers for Sale
Used Caterpillar D9T Crawler Bulldozer for Sale
2005 Dozers For Mining Mining Equipment Caterpillar Crawler Bulldozer
Used Crawler Bulldozer for Sale in USA
Used Dozers - 2005 Caterpillar D9T - for Sale

------------------------------------------------------------------------------------------------------------------
 
Davey Rotary Table Drilling Rig for Sale
Worldoils Marketplace
Davey Rotary Table Drilling Rig for Sale

Worldrigs ID: WR2752

Davey Rotary Table Drilling Rig for Sale
Drilling Rig - Davey Table Drive


Model : Rotary Table Drill Rig
Manufacturer : Davey
Condition : Used

Description :

Davey Rotary Table Drill Rig
200 PSI Piston Air Compressor
Detroit diesel deck engine
270 gas engine in truck (has a bad valve in it)

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Davey Rotary Table Drive Used Drilling Rig for Sale
Used Drilling Rig for Sale
Used Land Drilling Rig for Sale
Davey Rotary Table Drive Drilling Rig for Sale in USA
Davey Rotary Drilling Rig for Sale in USA

-------------------------------------------------------------------------------------------------------
Mini Bulker for sale
Worldoils Marketplace
Mini Bulker for sale

Worldrigs ID: WR494

Mini Bulker for sale
4500T Mini Bulker for sale

Used Mini Bulker for sale
1984 built Mini Bulker - For Sale
Cheap Small Bulk Carrier For Sale

General Information
Type of vessel : Bulk Carrier
Built : 1984
Classification : VIRES

Main Particulars
LOA : 94.86 m
LBP : 88.00 m
Breadth mounded : 15.80 m
Draft (in Summer) : 5.50 m
Light draft :
Fore : 1.67 m
Aft : 2.07 m

GRT : 2,826
NRT : 1,283
DWT : 4,485
M/E :
6EL40

BHP : 3,300 CV
RPM: 130
Cargo Gear : - Derricks : 3 Units x 15 Mts
Service Speed :
Full Loaded : 12.3 knots
In Ballast : 15.1 knots

Hold’s Dimensions
Hold No.1 : 25.2m x 15.6m x 5.6m
Hold No.2 : 37.8m x 15.6m x 5.6m

Cargo Hatches
Hold No.1 : 14.7m x 8.2m
Hold No.2 : 27.3m x 8.2m

The service capacities of bunker and fresh water :
FW / DO / FO : 390.7 / 37.4 / 331.6 mts

Daily Consumption
Main Engine : 8.0 mts FO/day

Generators
Power : 300 CV - 1.200 RPM x 2 units
Cargo Working : 1.2 Ts DO/day
At Sea : 0.6 Ts DO/day
Idle : 0.7 Ts DO/day

Ventilation System : Natural
Cargo batten fitted : NIL
Type of Hatches’ cover : Pontoon

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------
Search words(for official use only) -  
Mini Bulker for Sale
4500T Mini Bulker for sale
Cheap Small Bulk Carrier For Sale
95M Mini Bulker for sale
1984 built Mini Bulker - For Sale
Cheap Mini Bulker for sale
Bulk Carrier For Sale - 95M
5000Ton dwt Bulk Carrier for sale
Cheap Used Small Bulk Carrier For Sale
4000Ton Dwt Bulk Carrier For Sale

---------------------------------------------------------------------------------------

 
Drilling Rig - NOV 1000 Hp AC/VFD - For Sale
Worldoils Marketplace
Drilling Rig - NOV 1000 Hp AC/VFD - For Sale

Worldrigs ID: WR2751

NOV 1000 HP AC/VFD Drilling Rig for Sale
Drilling Rig - NOV 1000 Hp AC/VFD - For Sale


Description :

General Description :
Make : NOV   
Year Built/Rebuilt : 2008
Estimated Drilling Depth : 12,000 ft
Estimated Rig Move Loads : 17
Estimated Camp Move Loads : 26
Rated HP : 1000

Mast :
Height : 80.00 ft
Static Hook Load Capacity : 500,000lbs
Mast Racking Capacity : N/A

Substructure :
Style : Parallelogram
Height : 20.00 ft
Clear Height : 18.00 ft
Casing Capacity : 500,000lbs
Maximum Setback Load : N/A

Drawworks :
Make : NOV
Model : SSGD-250
Power Rating : 1,500 hp
Input Power :
2 ea Baylor
CM632UU1129A
Brake Type : Disc
Drilling Line Size : 1 1/4”

Top Drive / Power Swivel :
Make : NOV
Model : TDS 10-RR
Capacity : 250 Ton
Torque – Continuous :
Max RPM
20,000 ft-lb
@ 87 RPM

Swivel :
None

Rotary Table :
None   

Power Generation :   
Engines :
3 ea Caterpillar
3512 B
Generators :
3 ea Caterpillar
SR4B
SCR / VFD / DC/DC : VFD rig

Mud System :           
Mud Pumps :                    
2 ea NOV
F-1000       
Power Rating :
1000 hp
@ 140 rpm
Pressure Rating : 5,000 psi   
Active Mud Volume : 1,080  bbls
Reserve Mud Volume : 0 bbls
Shale Shakers :
4 ea Brandt
King Cobra
Mud Cleaner : N/A
Desander :
Brandt 10”
X 3 Cones
Desilter :
Brandt
DSLR-20GG-4CTX
Centrifuge : N/A

Well Control :            
Annular :
13 5/8” 5,000 psi
-1, Hydril, GX
21 ¼”-2000 psi
-1, Shaffer
Double Ram Preventer :
[Cameron] -1
Cameron,
U Double BOP
with Large Bore
Shear Ram
Choke Manifold :
Shaffer 3 1/8”
5,000 psi
BOP Closing Unit :
Shaffer 6 station
3,000 psi

Enhancements :
Forklift : Caterpillar It 62H
Iron Roughneck : NOV ST-80 R
Power Slips : NOV PS-21
Tubular Loading SYS : NOV TLS-6000

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
1000 HP AC/VFD Drilling Rig for Sale
NOV 1000 HP AC/VFD Drilling Rig - 2008 Built for Sale
12,000 ft Drilling Depth Capacity Land Drilling Rig
2008 Built NOV 1000 HP AC/VFD Drilling Rig for Sale
Land Drilling Rig - 1000 hp for Sale

-------------------------------------------------------------------------------------------------------
 
2003 CAT CS-563E Roller for sale
Worldoils Marketplace
2003 CAT CS-563E Roller for sale

Worldrigs ID: WR558

Caterpillar CS-563E Roller for Sale
2003 Used Caterpillar CS-563E Roller

Year : 2003
Manufacturer : Caterpillar
Model : CS-563E
Condition : Used

Description
Hours : 2,338 84" smooth drum, push blade
Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------------------
Search words(for official use only) -
Caterpillar CS-563E Roller for Sale
Mining Equipment Caterpillar Roller
Used Caterpillar CS-563E Roller
 2003 Caterpillar CS-563E Roller for Sale
Caterpillar Roller for Sale in USA

------------------------------------------------------------------------
Towing Tug for Sale
Worldoils Marketplace
Towing Tug for Sale

Worldrigs ID: WR119

Towing Tug  for Sale
1991 Built Tug for sale

Built : 1991 
Class : JG Coastal
LB :11.94x4.95
M/E : MHI SBB-MTC 500ps x 2/300rpm

Inspectable Place: West Japan

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------------------------------------------------------------------------
Search words (for official use only) -
Towing Tugs 1991 Built for Sale
1991 Built Towing Tug for sale
Used TowingTug for Sale
Tug for sale
-------------------------------------------------------------------------------------------------------------------------------------

 
Crawler Crane for Sale
Worldoils Marketplace
Crawler Crane for Sale

Worldrigs ID: WR271

Crawler Crane 600 T for Sale
Crawler Crane with 450 Ton Skyhorse Attachment
1982 Built Crawler Crane for Sale


Principal Particulars
Built year : 1982
Manufacturer : American Hoist & Derrick Company

Classification
ABS consulting, API (2C)

Capacities
Lifting capacity : 122 t @ 12.7 m radius (Boom angle: 80.1 deg.)
Engine : Cummins KTA 1150 c

Dimensions & Load Chart

Dimensions : 
Overall height : 11.563 mtrs
Overall length : 68.5 mtrs.
Boom length : 61 mtrs.
Boom type :
94 H Tubular Chord boom with super sky horse attachment & trailing counterweight

Load line chart (Please refer full load & curve chart) :
Radius (m) / Boom Angle (deg.) / S.W.Load (kgs.)
10.7 m / 82.1 / 135930 kgs
12.2 m / 80.6 / 116470 kgs
15.2 m / 77.7 / 90070 kgs
18.3 m / 74.8 / 71380 kgs
21.3 m / 71.8 / 57860 kgs

Hoists & Other Features
Boom hoist :
Minimum breaking force : 460 kn (46.9 t)
Reeved with : 25.4 mm, 292.60 mtrs.
Max. Boom angle : 82.1 deg.

Auxiliary hoist :
Measured breaking force : 598.72 kn
Wire rope : 1-1/8" (28.5 mm), 2125 fts
Aux. block capacity : 10.5 t
Single line speed :
Nominal rating - 155 fpm, high speed rating: 275 fpm

Other features

Flood lights : 2 sets x 400 watt
Simultaneous operation : Capable of two function with full load & speed.

Main Hoist

Measured breaking force : 741 kn (75.6 t)
Wire rope : 1-1/4" (31.8 mm), 3600 fts.

Single line speed -
Nominal rating : 155 fpm
high speed rating : 275 fpm
Traveling block capacity : 122 t
Load indicator : Electronic load indicator

Rotation :
Rotation direction : 360 deg. swing with load.
Swing speed : 2.15 rpm max.
Transmission type (Crawler crane) : Mechanical with torque convertor

Price & Terms : Please use the email form below to enquire.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.
 
The details mentioned above are believed to be accurate but are not guaranteed.

------------------------------------------------------------------------
Search words(for official use only) :
Crawler Crane with Skyhorse Attachment for Sale
600 Ton Crawler Crane for Sale
600 T Crawler Crane with 450 T Skyhorse Attachment
1982 Built Crawler Crane for Sale
Skyhorse attached Crawler Crane for Sale

--------------------------------------------------------------------------
 
2005 Caterpillar D7R II for Sale
Worldoils Marketplace
2005 Caterpillar D7R II for Sale

Worldrigs ID: WR535

Caterpillar D7R II Mining Equipment for Sale
2005 Used Caterpillar Mining Equipment


Year: 2005
Manufacturer : Caterpillar
Model : D7R II
Location : USA
Condition : Used
Hours : 9,487

Description
Used Caterpillar D7RII LGP tractor
CAB, A/C, straight blade w/tilt, 36" SBG

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------
Search words(for official use only) - 
Caterpillar D7R II Mining Equipment for Sale
Used Caterpillar Mining Equipment
2005 Caterpillar D7R II for Sale in USA

------------------------------------------------------------------------------------
58m Offshore Support Vessel for sale - 2003 built
Worldoils Marketplace
58m Offshore Support Vessel for sale - 2003 built

Worldrigs ID: WR437

Offshore Support Vessel - 58m - for sale - 2003 built
OSV for sale


Specifications :
Type of Vessel : Offshore Support Vessel
Year built : 2002
Registered : 2003
GRT/NRT : 1368/410

Plying Limit : Unrestricted
Classification : American Bureau of Shipping.
Class Notation : ABS + A1 E Offshore Support Vessel *AMS* FiFi Class1
Horse Power : 2 x 2100 BHP
Cruising Speed : 12 Knots

Fuel Consumption :
Cruising Speed 650 Litres/hour
Generator 80 Litres/hour

Main Characteristics :
L.O.A : 57.50 M
Breath Moulded : 13.80 M
Depth Moulded : 5.50 M
Max Draft : 4.50 M
Deck Strength : 7 MT/sq m
Clear Deck space : Approx. 350 sq. m
Deck Cargo : 700 MT
Deadweight : 1369 Tonnes

Capacities :
Fuel Oil : 350 cu.m
Fresh Water : 200 cu.m
Drill Water : 380 cu.m
Liquid Mud : 2 x 125 cu.m
Dry Bulk : 4 x 1650 cu. ft
Foam : 11 cu.m
Detergent : 11 cu. m
Freezer : 6 cu. m
Chiller : 8 cu. m

Auxiliaries :
3 x Caterpillar 3408 C
Genset 315KW/415V/3Ph/50Hz

Pump :
2 x 1200 cbm/hr @ 11 bar cu.m. at head 30m.
Main fire pump : 1 x Allen gwynnes nimbus pump capacity of 50 cu.m at head 100 m.
Emergency fire pump : 1 x Yanmar VDP20E pump capacity 500 ltrs/min at head 30m.

Deck Machinery :
3 x 5 MT electric capstan.
1 x 8 MT @ 12 m/min electric hydraulic type c/w 2 x wildcats plus 2 x warping drums
2 x 1590 kg stockless bower anchors
Total 372 m x 34 mm U2 stud-link chain

Propulsion Machinery :
Main Engines : 2 x Caterpillar 3516 B each of 2100 BHP
Marine Gearbox : 2 x Reintjes WAF 862 L with ratio 5.50 : 1
Propulsion : 2 x Berg controllable pitch in kort nozzles
Bow Thruster : 1 x 325 KW Kawasaki KT-43 B1 (CPP) tunnel units of 5 MT thrust

Navigation & Communication Equipment :
GMDSS : Area 3
Gyro Compass : 1 x Furuno
Radar : 2 x Furuno
Echo sounder : 1 x Furuno
SART : 2 x Joltron
EPIRB : 1 x McMurdo MCM-406A
Navtax Receiver : 1 x Furuno
Autopilot : 1 x Anschuetz
Weather Fax : 1 x Furuno
Speed Log : 1 x Furuno
GPS Plotter : 1 x Furuno

Accommodation :
Fully air conditioning total 50 berth
1 x 2 berth hospital & 1 x office

Fire Fighting Equipment :
Fire Pump : 2 x 1200 cbm/hr @ 11 bar
Fire Monitor : 2 x 1200 cbu/hr @ 12 bar
Fire Extinguish system : Fixed Co2 system for engine room
Fire Hydrants and Extinguishers : As per Classification’s requirement

Life Saving Appliances :
As per SOLAS 74/78, Port of Registry and Classification’s requirements

Other Equipment
Life Rafts : 4 x 25 men
Rescue Boat : 1 x 6 men rigid rescue craft c/w davit & 25 HP outboard engine.
Manoverboard : 2 x Comet.
Deck flood light : 3 x 1000 W deck flood light.
Compressor : 1 x BA recharging compressor

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------------------------------
Search words(for official use only) - 
Offshore Supply Vessel For Sale
Offshore Supply Vessel For Sale in Singapore, Malaysia, Indonesia
OSV for sale in Singapore, Malaysia, Indonesia
Offshore Support Vessel OSV For Sale

---------------------------------------------------------------------------------------------------------------------------------

 

 
Generic LTD 360 Cable Drilling Rig for Sale
Worldoils Marketplace
Generic LTD 360 Cable Drilling Rig for Sale

Worldrigs ID: WR2748

Generic LTD 360 Cable Drilling Rig for Sale
New Generic LTD 360 Cable Drilling Rig for Sale

Model : LTD 360 Cable Drill Rig
Manufacturer : Generic
Condition : New

Description :

LTD 360 Cable Drill Rig
Carries enough mainline cable to drill to a depth of 450 feet
Bore diameters of 4" to 10" inches
Lift capability of 8,000 lbs for casing removal
40 gallons of on-board water storage with a 40 PSI pump
150 amp arc welder when steel casing is used
20 gallons of fuel (enough to drill about 75 feet)
Rated - Penetration rates usually range between 2-½-5 feet per hour
depending on the geology/ground formations with drilling conditions
Mounted on a 2 axles trailer

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Drilling Rig - Generic LTD 360 Cable - For Sale
Generic LTD 360 Cable Land Drilling Rig for Sale
New Generic Drilling Rig for Sale
New Generic LTD 360 Cable Drilling Rig for Sale in USA
New Generic Land Drilling Rig for Sale in USA

-------------------------------------------------------------------------------------------------------
 
Schramm Rotadrill T64HB Drilling Rig for Sale
Worldoils Marketplace
Schramm Rotadrill T64HB Drilling Rig for Sale

Worldrigs ID: WR196

Schramm Rotadrill T64HB Drilling Rig for Sale
Used Schramm Rotadrill T64HB Drilling Rig


Model : Rotadrill T64HB Drill Rig
Manufacturer : Schramm
Year : 1974
Condition : Used

Description :

Schramm Rotadrill T64HB Drill Rig
Rebuilt - Detroit Diesel Deck Engine
No Air Compressor on deck
Tool Carrying Cabinet
Reinforced Mast
Heavy Winch line
3 Outriggers
Hydraulic Pull down & Pull Back
Multiple speed top head motor
Hydraulic Cooler
Autofeed
Mounted on a 1974 International RO Truck
Newer 6 Cylinder Engine
Multi-Speed Transmission

Location : USA

Price & terms : Please enquire using the email form below.       

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Schramm Rotadrill T64HB Drilling Rig - 1974 Built for Sale
Used Drilling Rig - Schramm Rotadrill T64HB
1974 Built Schramm Rotadrill T64HB Drilling Rig for Sale
Schramm Land Drilling Rig for Sale
Schramm Rotadrill T64HB Drilling Rig for Sale in USA

-------------------------------------------------------------------------------------------------------
Newbuilding 100 tons non-AHC Knuckleboom Crane
Worldoils Marketplace
Newbuilding 100 tons non-AHC Knuckleboom Crane

Worldrigs ID: WR347

Newbuilding 100 tons non-AHC Knuckleboom Crane
100 tons non-AHC Knuckleboom Crane for sale

Specifications
- 100 tons 10 meters
- Built 2013 
- Class ABS
- Weight 125 tons
- 2 x 355 Kw electric motors power supply
- Max outreach 27 meters

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

------------------------------------------------------------------------------------------
Search words (for official use only) :
New non-AHC Knuckleboom Crane for sale
Non-AHC Knuckleboom Crane 2013 Built for sale
100 tons non-AHC Knuckleboom Crane for sale  in Far East Asia
Non-AHC Knuckleboom Crane for sale - Newbuilding
New 100T non-AHC Knuckleboom Crane for sale  in Far East Asia

------------------------------------------------------------------------------------------

 
ASD Tug Boat (3600hp)
Worldoils Marketplace
ASD Tug Boat (3600hp)

Worldrigs ID: WR117

3600hp ASD Tug Boat for sale
2008 Built Tug for Sale

Description

Built : Nov 2007
Capacity : 3600hp
Class : Korea
Dimensions :
33.80 x 9.4 x 4.15 m
Location : Korea
GT: 213 tons

M/E : NIIGATA 6L25HX, 1323kW @ 750rpm x 2sets

Propeller: NIIGATA Z-peller x 2sets

Speed : 13.5 knots (design speed) / 13.93 knots (sea trial max.)

Fuel consumption: 201 g/kW. Hr

Nav. & Comm. : Radar, GPS Plotter, AIS, VHF, Magnetic Compass, etc.

Hyd. Winch : Fitted at bow & stern

Fi-Fi system : Fitted

More details available on request.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------
Search words (for official use only) -

ASD Tug Boat for Sale
3600hp Tug Boat for Sale
2008 Built Tug Boat for Sale
Tugboat for Sale - 3600hp
ASD Tugs for Sale

--------------------------------------------------------------------

 
200Ton Floating Crane for Sale
Worldoils Marketplace
200Ton Floating Crane for Sale

Worldrigs ID: WR114

Floating Cranes for Sale
Used Floating Cranes for Sale
1996 built Floating Cranes for Sale


G.T: 732 ton
LXBXD: 48.98 X 19.00 X 3.8m
Built: Mar 1996
Type of crane: Sumitomo SF1700HD
Engine: Denyo 350ps x 2 stes6. Deck load capacity:  19.5x19.0m
Lifting Capacity: 200 ton
Boom Length: 42M
Hook: 200ton, 150ton10. Mooring Anchor: 4sets
Bow thrusters fitted
 
Inspection and delivery: Korea

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------
Search words (for official use only) -
Floating Cranes - 200MT - For Sale
200MT Floating Cranes for Sale
Used Floating Cranes 1996 built for Sale
1996 built Used Floating Cranes for Sale
Used Floating Cranes - 1996 Built

--------------------------------------------------------------------------------

Coal/Ore/Sand Loading barge for Sale
Worldoils Marketplace
Coal/Ore/Sand Loading barge for Sale

Worldrigs ID: WR116

Coal/Ore/Sand Loading barge for sale

Description
Built: 2008
Loading Capacity: 2000ton/HR
Available: COAL / ORE / SAND Loading at offshore from barge to huge vessel.

Inspectable Place : West Japan

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

--------------------------------------------------------------------------------------------------------
Search words (for official use only) -
Coal/Ore/Sand Loading Barge 2008 Built for sale
2008 Built
Coal Loading Barge for sale
2000ton/hr Loading Capacity Barge

2008 Built
 Sand Loading Barge for sale
-------------------------------------------------------------------------------------------------------

 
3000Ton Revolving Floating Crane
Worldoils Marketplace
3000Ton Revolving Floating Crane

Worldrigs ID: WR76

3300Ton Revolving Floating Crane Barge for Sale
Floating Crane Barge for Sale

Description :

Max Fixed lifting capacity : 3,300Tons
Max revolving lifting capacity : 2,600 Tons
Built in 2011
Length overall : 156m
Breadth(moulded) : 45m
Depth (moulded) : 13.5m

Operating draft : 7-12m
Full load displacement : 59,000MT
Ballast capacity : 35,000MT
Fuel oil capacity : 4,050MT
Fresh water : 2,800MT

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------------
Search words (for official use only) :
3000Ton crane barge for sale
Floating Crane for Sale in Asia
3300Ton Revolving Floating Crane in Asia
Floating Crane - 3000 Ton - For Sale
3300Ton Floating Crane for sale

----------------------------------------------------------------------------------------

 
Newbuilding Oil Barge for Sale
Worldoils Marketplace
Newbuilding Oil Barge for Sale

Worldrigs ID: WR735

Oil Barge for Sale
3277dwt Oil Barge for Sale
Newbuilding Oil Barge for Sale

Description :
This double hull and double bottom oil barge is designed for
carrying  base oil and finished oil, which flashpoint is below 60°C.

Particulars :
Length overall : 230 ft (70.104 m)
Length bp : 67.30 m
Breadth moulded : 60 ft (18.290 m)
Depth moulded : 18 ft (5.490 m)

Draft moulded : 3.63 m
Gross tonnage : 1834 t
Net tonnage : 807 t
Lightship weight : 970.19 mt

Displacement : 4247.55 mt at summer draft
Tank capacity : +/- 3277.50 mt
Hull material : steel

Tank age :
Cargo tank : +/- 3750 cub.mt
Fuel oil : +/- 8 cub.mt
Dirty oil tank : +/- 16 cub.mt
Fresh water : +/- 21 cub.mt
Sewage : +/- 16 cub.mt

Machinery, equipment & piping :
Cargo fuel pump :
2 x 2GC/BL350 Q=350 cub.mt/hr, P=0.8 mpa, 1500 rpm

Diesel engine :
2 x for starting cargo fuel pump, 6135 AZcaf, w=190 kW/220hp, n=1500 rpm

Reduction gear box : 2 x 135 r = 1:1
Generator : 2 x 24 kW daewoo, 415v / 50 hz / 3ph
General pump : 1 x 22 cub.mt/hr x 26 m/h

Fire pump : 1 x 22 cub.mt/hr x 26 m/h
Oily dirty water seperator : 0.5 cub.mt/hr
Hall's anchour : 1 x 900kg, wire cable Ø 28 x 200m

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

 ---------------------------------------------------------------------------------------------------
Search words (for official use only) :
Oil Barge for Sale
Double Hull Barge for Sale - Length 230ft
New 230FT Barge For Sale in Asia
Newbuilding Oil Barge For Sale - 3277DWT
3277 dwt New Oil Barge for Sale in China
18ft depth new barge for Sale

----------------------------------------------------------------------------------------------------

Newbuilding 1658BHP 26M Towing Tug
Worldoils Marketplace
Newbuilding 1658BHP 26M Towing Tug

Worldrigs ID: WR348

New Tug For Sale
Newbuilding 1658BHP 26M Towing Tug
1600BHP Towing Tug For Sale

Principal Particulars
Class : GL
Length overall : 26.00m
Length B.P. : 23.98m
Breadth moulded : 8.00m
Depth moulded : 3.65m
Draft moulded : 3.00m
Trial speed : approx 10 knots
Designed bollard pull : 22 tonnes (approx)

Machinery
Main Engine : Yanmar 6AYM-ETE, 2 x 829BHP / 1900 rpm
Gear box : Yanmar YXH 240 L, Ratio: 5.91:1
Propeller : 2 x solid fixed pitch propellers
Main generator : 2 x 28KVA Cummins / Yanmar

Tankage
Fuel oil : 153M³
Fresh water : 46M³
Ballast : 29M³

Deck Machinery
Anchor : 2 x stockless bower anchors (420kg)
Chain Cable : Nine (9) lengths of Grade U2 chains
Anchor Windlass : 17.5mm anchor windlass
Towing Hook : 1 x 25 tons

Navigation & Communication Equipment
Echo Sounder : 1
GPS : 1
Radar : 1
4” Spare Magnetic Compass : 1
SSB & VHF : 1
EPIRB : 1
Battery Clock : 1
Barometer : 1
Searchlight : 1
Floodlight : 3
Clear View Screen : 1
High Steering Wooden Chair : 1

Auxiliary Equipment
Bilge & Ballast pump : Power: 1 x 2.2HP / 1.65kw / 415v50Hz
Q (1/min): 50 – 170
H (m): 42 -22
GS & Fire pump : Power: 1 x 2.2HP / 1.65kw / 415v50Hz
Q (1/min): 50 – 170
H (m): 42 -22
Fresh water pressure set : Power: ½ HP
Suction head (m): 8
Max. Quantity (1/min): 48
Sea water pressure set : Power: ½ HP
Suction head (m): 8
Max. Quantity (1/min): 48

Fire Fighting System
2’ Firehouse + Hydrants : 3 sets
Fire Extinguisher : 9 nos
Fireman Axe : 1
Scoop & Sand Box : 1
Fire Bucket : 3
Anchor Ball : 3

Life Saving Equipment
Life Raft : 2 units (10 men)
Life Buoy : 8 pcs
Life Jackets : 14 pcs
Parachute Distress Rocket : 12 pcs
Fireman Outfit : 1 set

Accommodation
Total Complement : 10 Crews

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


Land Drilling Rigs

----------------------------------------------------------------------------
Search words ( For official use only) :
Towing Tug for sale
Towing Tug for sale in Singapore
Newbuilding Towing Tug for sale in Asia
1600bhp Towing Tug for Sale
Tug For USA
Tug For Columbia
1658 bhp towing Tug
Tug For South America
Tug For Mexico
New Towing Tug For Sale in Singapore
Tug For Trinidad

------------------------------------------------------------------------
 
5000BHP 60TBP ASD Tug - New - For Sale
Worldoils Marketplace
5000BHP 60TBP ASD Tug - New - For Sale

Worldrigs ID: WR627

ASD Tug for sale
5000bhp ASD Tug for Sale
New ASD Tug For Sale


Principal particulars
Length O.A. : 30.50 m
Length W.L. : 29.50 m
Beam mld. : 9.60 m
Depth mld. : 4.370 m
Draft designed : 3.50 m
Draft max. : 4.00 m
Complement : 10 men
F.O. : 140 cub.mt approx.
F.W. : 30 cub.mt approx.
Lub. oil : 4 cub.mt approx.
Despersant : 3 cub.mt approx.
Foam : 6 cub.mt approx.

Designed specs
Gross tonnage : <400
Speed : 12.5 knots
Bollard pull : 60t

Dimension
Length overall : 30.50 m
Length dwl : 29.50 m
Breadth moulded : 9.6 m
Depth moulded : 4.37 m
Draft (designed) : 3.80 m
Draft (max) : 4.00 m

Machinery
Cat 3516B 2 x 1864kW / 1600 rpm
Rotation ccw. 2 x 2500 bhp = total 5000 bhp
Propulsion sys. : 2 x azimuth thruster (schottel SRP1515FP)
Auxiliary engine :
2 x 112kW / 415v / 50hz / 3P, capable run in parallel
Emergency power : batteries
Sewage system : 10 men
Oily water separator : 0.5 cub.mt / hr @ 2kg/cm2

Deck machinery
Fwd towing winch :
brake holding 120 tonnes at 1st layer, static
Windlass : 3t @ 10m/min
Towing hook : 65t swl
External fi-fi : half fifi-1
Fire monitors : 600 cub.mt / hr @ 120m head capacity

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
Price & terms : Please enquire using the email form below.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) -
ASD Tug for sale
ASD Tug For Sale in Middle East, India
New 60TBP ASD Tug For Sale
New 5000bhp ASD Tug For Sale
5000BHP 60TBP ASD Tug For sale
ASD Tug For Sale in Singapore, Malaysia, Indonesia

-------------------------------------------------------------------------------------------------------

 
1340 HP Ocean Going Tug
Worldoils Marketplace
1340 HP Ocean Going Tug

Worldrigs ID: WR643

Ocean Going Tug for sale
1340 HP Ocean Going Tug - For Sale
1996 Built Ocean Going Tug For Sale

Year of built : Nov 1996

Principal dimensions :
Length overall : 25.00 m
Length B.P. : 23.50 m
Breadth moulded : 7.50 m
Depth moulded : 3.20 m
Draft design : 2.50 m
GRT/NRT : 174/52

Capacity :
F.W. Capacity : 30 tonnes
F.O. Capacity : 115 tonnes
F.O. Consumption : 4.7 T.P.D.
Cruising F.O. Consumption : 3.8 T.P.D.
Endurance : 28 days

Nozzle : 2 kort nozzles

Navigational equipment :
Furuno FS-1500
Furuno FM-2510/DC24V/25W
Furuno 1941
Furuno GP 50
Furuno FCV-665
PA system

Accommodation :
10 persons (air conditioned)

Main propulsion :
Twin caterpillar D.3412 TA BTA
2 x 671 bhp

Gear box :
Twin disc 520-2

Bollard pull : 15 tonnes

Speed : 10 knots

Auxiliaries :
Generators
2 x cummins 4 BT 39 (m)
GCI 415V/50 HZ/40 kW

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed. 

---------------------------------------------------------------------------------------------------------
Search words (for official use only) - 
Ocean Going Tug For Sale
1340 HP Ocean Going Tug - For Sale

Tugs For Sale in Middle East, India
Ocean Going Tug For Sale in Singapore, Malaysia, Indonesia
Used 1340 HP Ocean Going Tugs for Sale
1996 Built Ocean Going Tug For Sale

-------------------------------------------------------------------------------------------------------
Generic Larson Reverse Rotary Drilling Rig for Sale
Worldoils Marketplace
Generic Larson Reverse Rotary Drilling Rig for Sale

Worldrigs ID: WR1036

Generic Larson Reverse Rotary Drilling Rig for Sale
Drilling Rig - Generic Larson Reverse Rotary - Air Assited


Model : Larson Reverse Rotary Drill Rig - Air Assited
Manufacturer : Generic
Condition : Used

Description :

1982 Larson Air Assisted Reverse Rotary Drill Rig with Substructure
New derrick 120,000 lbs rated
rebult hydraulic system in 2010
Caterpillar 6 cylinder deck engine (spare rebuilt engine in a crate)
double draw works
1" main line, 1" laydown line, 1/2" tail out line

Included as a Package:
Doghouse - Wired, lighted, AC, tool room, Geolograph
40ft 5th wheel, tandem wheel, drill pipe trailer
Substructure 15ft X 12ft 8ft Custom fabricated with guard rails
1,500  ft of 6-5/8" ID IF modified
90ft of 14" drill collars
2010 Atlas Copco 950 cfm / 350 psi SRVS1000 CD6 Air Compressor
1,000 gallon fuel storage tank with transfer pump
King swivel
Pilot Hole bits
Reaming Hole oppener bits
Casing Collars

Optional Equipment that Cost Extra:
Complete testing pump equipment, 6 pumps, 800 ft of 10x3.5x2.437" column
tube she, gear head, discharge head
12 Cylinder Caterpillar test engine

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Generic Drilling Rig for Sale
Generic Larson Reverse Rotary - Air Assited Drilling Rig
Generic Used Larson Reverse Rotary - Air Assited Drilling Rig for Sale
Used Generic Air Assited Drilling Rig for Sale in USA
Generic Air Assited Drilling Rig for Sale in USA

-------------------------------------------------------------------------------------------------------
 
Geoprobe 8150LS Crawler Drilling Rig for Sale
Worldoils Marketplace
Geoprobe 8150LS Crawler Drilling Rig for Sale

Worldrigs ID: WR2745

Geoprobe 8150LS Crawler Drilling Rig for Sale
Geoprobe 8150LS Crawler Drilling Rig - 2017 Built for Sale


Model : 8150LS Crawler Drill Rig
Manufacturer : Geoprobe
Year : 2017
Condition : Used

Description :

Geoprobe 8150LS Crawler Drill Rig
Geoprobe 50DT Track Base Platform
Geoprobe GV5 Sonic Head Long Stroke
Geoprobe Designed Rod Handling
System Head Feed Stroke: 157"
50K Dynamic Force
Remote Diagnostics
Adjustable Swing-arm Control Panel
Automatic Drop Hammer 140 lb
Winch Kit: 2,500 lb

Safety Cage
Triplex High Pressure Water Pump
Air Compressor Kit, C6.6 with BA-922
Drop Rack System with Rod Rack
Drill Mast Side-Shift
Head Centerline Side-Shift
Fits in 40 ft Shipping Container for Exporting
10-ft Tooling Compatible
Rock Coring Compatible
14" in Double Wrench Breakout
Dual Winch System
Front and Rear Outriggers (Four Point Stabilization)

Sonic tooling inventory with rig: (extra cost or included as a package)
Two tooling indexing racks with rollers
230 ft of 4 tooling
230 ft of 6” tooling
100 ft of 8” tooling
One Actuator core for rod handler
One SDT-60 Weighted Wire Line Core Barrel
Several bits and adapters
(Cost Extra or included as a package for all listed together)
2010 Freightliner model Cascadia Truck with Diesel Engine (492,560 miles)
Trailer for the hauling the drill, pipe, and tooling (as is in the pictures)
1210 Hours on Engine, 210 Hours on Sonic Head at time of listing.
(Price Reduced as of 7/2020 to sell fast)

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
2017 Built Geoprobe 8150LS Crawler Drilling Rig for Sale
Drilling Rig - Geoprobe 8150LS - For Sale
Geoprobe 8150LS Crawler Used Drilling Rig for Sale
Used Geoprobe 8150LS Crawler Drilling Rig for Sale in USA
Geoprobe Crawler Drilling Rig for Sale in USA

-------------------------------------------------------------------------------------------------------
 
4400BHP DP1 Support Supply Vessel for Sale
Worldoils Marketplace
4400BHP DP1 Support Supply Vessel for Sale

Worldrigs ID: WR124

DP1 Subsea Support Vessel
4400BHP DP1 Support Supply Vessel for Sale


Specifications

General
Class : ABS
Notation :
ABS Class+A1 (E) “Offshore Supply Vessel, Fire
Fighting Vessel Class 1” + AMS + DPS-1

Principal Particulars
Length Overall : 59.25m
Length Waterline : 46.00m
Breadth Moulded : 15.00m
Depth Moulded : 6.10m
Draft (max) : 4.60m
GRT/NRT : 1600/ TBA (approx)

Performance
Maximum Speed : 12.5 Knots
Economical Speed : 10 Knots
Type of Fuel : Marine Gas Oil
Bollard Pull : Nil

Fuel Consumption :
19 cbm /24 hours @ max speed
12 cbm /24 hours @ econ speed

Cargo Capacities
Deadweight : 1450 Ton (approx)
Deck Cargo : 500Ton (approx)
Deck Strength : 7 Ton/sqm uniform loading
Clear Deck Area : 350 sqm (approx)

Fuel Oil : 1000 sqm (approx)
Fresh Water : 250 sqm (approx)
Ballast/Drill Water : TBA sqm (approx)
Liquid Mud : Nil

Cement TankCement Tank : Nil
Freezer / Chiller : 10 cbm / 10 cbm
Foam / Detergent : 15 cbm / 15 cbm
Rig Chain Locker : Nil

Pumps
Fuel Oil : 1 x 150 cbm/hr @ 60 m head
Fresh Water : 1 x 100 cbm/hr @ 75 m head
SWB/Drill Water : Nil
Liquid Mud : Nil
Bilge/Ballast : 2 x 75 cbm/hr @ 40 m head
GS/Fire Pump : 1 x 75 cbm/hr @ 40 m head
Bulk Cement Compressor : Nil

Propulsion System
Main Engines : 2 x 2200BHP (1600kw) @ 1600rpm, Wartsila 8L20
Main Generator : 3 x 350kw, 415V/3Ph/50Hz, CAT
Emergency Generator : 1 x 80kw, Cummins
Bow Thruster : 1 x 5 Ton Thruster, abt 350kw, Kawasaki KT-43B1
Steering Gear : Nil
Z-Peller : 2 x Wartsila,Lips CS 225-S/WN-K
DP1 : MT or Kongsberg

Deck Equipment
Anchor Windlass 1 x electro hydraulic, 8 tons @12 m/min for 40mm
Drum Nil
Mooring lines 4 x 160M @ 157kn breaking strength
Tow line 1 x 190M long towline of min. 406KN breaking
Bow Anchors 2 x 1575 kg HHP anchor
Chains 440 m (L) x 40 mm (Dia), Grade U2
Capstan 2 x 5 mt @ 15 m/min electro hydraulic, Marine Equipment

Mooring winch :
4 x 60 mt @ 1000M, 32mm dia. wire
4 x 3 tonnes high holding type anchors

Deck Crane : 10 tons x 20m

Accommodation
4 x 1 berth cabin = 4
3 x 2 berth cabin = 6
10 x 4 berth cabin = 40
Total : 50

Hospital
Hospital 1 x 1 berth cabin = 1
All cabins fully air-conditioned & c/w attached washroom.

Radio & Navigation Equipment
GMDSS Area A3, consist of :
SSB 1 x JRC/Furuno
Inmarsat C 2 x JRC/Furuno
VHF Radio 2 x JRC/Furuno
Navtex ReceiverNavtex Receiver 1 x JRC/Furuno1 x JRC/Furuno

SART 2 x JRC/Furuno
EPIRB 1 x JRC/Furuno
Portable VHF Radios 3 x JRC/Furuno
Radar 2 x JRC/Furuno
Echo Sounder 1 x JRC/Furuno
DGPS 1 x JRC/Furuno
Gyrocompass 1 x JRC/Furuno/Anschutz/Tokimec

Autopilot 1 x JRC/Furuno/Anschutz/Tokimec
Magnetic Compass 1 x JRC/Furuno
Weather Fax 1 x JRC/Furuno
Speed Log 1 x JRC/Furuno
Wind Indicator 1 x JRC/Furuno
AIS 1 x JRC/Furuno

Joystick Kongsberg/MT
Vessel also fitted with PA Talkback System & Self-powered
Telephone.

Fire-Fighting Equipment and Anti-Pollution Equipment
External :
FiFi System Class 1 with water curtain all round
Fire Pump 2 x 1200 cbm/hr @ 11 bar
driven by front PTO ME
Monitors 2 x fire monitors
water/foam 1 x 300 - 1200 cbm/hr, FFS
water 1 x 1200 cbm/hr, FFS
Oil Dispersant System 2 x Cluster nozzles

Internal :
Emergency Fire Pump 1 x 25 m3/hr x 45m head
BA Recharing Comp 1 x 75 ltr/min @ 200 bar
CO2 system in engine room
Fire Detection & Alarm in living spaces and engine room.

Miscellaneous
Liferafts 6 x 20, SOLAS standard,ChinaMake
Rescue boat 1 x 6 men, c/w outboard engine, China Make ina Make
Oily Water Separator 1 x 1.0 m3/hr c/w 15ppm alarm
Water Maker 1 x 5 T/day, Sweden
Sewage Treatment Plant 1 x 60 men/day,China Make
Air cond and freezer Germany

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------
Search words (for official use only) -
4400bhp New DP1 Support Supply Vessel
DP1 Subsea Support Vessel 4400bhp for sale
New 4400BHP DP1 Support Supply Vessel for Sale
Brand New Subsea Support Vessel
Over 59m Subsea Support Vessel for sale

-----------------------------------------------------------------------------------

Driltech D25KW Drilling Rig for Sale
Worldoils Marketplace
Driltech D25KW Drilling Rig for Sale

Worldrigs ID: WR530

Driltech D25KW Drilling Rig for Sale
1997 Built Driltech Used Drill Rig for Sale


Model : D25KW Drill Rig
Manufacturer : Driltech
Year : 1997
Condition : Used

Description :

1997 Driltech D25KW Drill Rig
Sullair 900X350 Air Compressor
W/A CAT C15 Deck Engine (Engine has less than 1000 hours since rebuild)
Mounted a Ford LNT 8000 W/A 300 HP Cummins Engine
8LL Transmission
18,000 Front Axle, 46,000 Rear Axle
Pipe Rack Holds 15 PCS.
Rotary Head 89 RPM, 72,600 LBS. Torque
JIB Boom, Hydraulic extend W/180 degree Hydraulic Swing
Winch, Hydraulic 7,500 LB. Capacity
Drill Table, 20" Opening with Hydraulic Adjustment
Breakout Wrench, 48" jaw type
Remote Control Station
Water Injection, 20 GPM with foam pump
Airline Lubricator
Operators Platform
Fine Feed & Torque Controls
Night Lights
Slip Bushings
With 420 feet OF 4-1/2" X 20 FT. Drill Pipe & Tooling.
It has Good Tires and Runs Strong.

Location : USA

Price & terms : Please enquire using the email form below.       

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Driltech D25KW Drilling Rig - 1997 Built for Sale
Driltech D25KW Used Drilling Rig for Sale
Driltech Land Drilling Rig for Sale
Drilling Rig - Driltech D25KW for Sale
Driltech D25KW Drilling Rig for Sale in USA

-------------------------------------------------------------------------------------------------------
 
3000HP Electric Deep Drilling Rig - For Sale
Worldoils Marketplace
3000HP Electric Deep Drilling Rig - For Sale

Worldrigs ID: WR2891

3000HP Electric Deep Drilling Rig - For Sale
Deep Land Drilling Rig for Sale

Description :

Rig Specifications
A. General Rig Specification :
The rig will be suitable for operation in the temperature range 0°C to 55°C
 
General Description :
- Drilling depth: 9000m(4-1/2"DP)
- Max hook load of mast and substructure: 6750KN
- Travelling system: 7×8
- Diameter of drilling line: 1-5/8"(42mm)
- Top drive: DQ90BS-JH
- 37 1/2" electric motor driven Rotary table
- Rated input power of drawworks: 3000HP
- Mud pump unit: 1600HPX3
- Mast type and effective height: K type, 49.5m
- Substructure type and clear height: Slingshot,42ft/12.8m
- Electric drive type: AC-VFD-AC
- Rig power system: 7xCAT3512B, 7X1101bKW 600V/60Hz & 1xCAT C18, 545KW/60Hz
- Voltage/Frequency/Phase: 600V/480V/110V 60HZ/3phase
- All electric equipments are in accordance with API RP505 standard.
- Main structure painting standard
- Explosion standard: ATEX/IECEX/UL/CNEX
 
A.1.1. Mast and Associated Equipment : Qty - 1 set
- To be API monogrammed, possessing valid API-4F certificate. Confirmed to API 4F
4th edition,PSL1,SSL: E2 U2.
- Nominal drilling depth: 6000-9000m(4-1/2"DP); 5000-8000m(5"DP);4000-7000m(5-1/2"DP)
- Max. Static hook load: 1,500,000 lbs/750ton/6750KN(7×8 strand,14 lines);
- Effective height:162.5ft/49.5 m as per API approved Mast to safely accommodate top drive 
and travelling system;
- Height of monkey board(from drill floor):80ft 4-1/2",83ft 8",86ft 11-1/4"(24.5m,25.5m,26.5m);
- Top span(front x side): 8ft 6-3/4"×7ft10-1/2"(2.6m×2.4m);Bottom span(front): 32ft 9-3/4"(10m) .
- Steel material. Welding Procedure as per AWS.
 
The allowed wind speed of mast :
- Operating mode(Full stands and full hook load):16.5m/s (32knots)
- Working condition(Full hook load and full rotary beam load ):16.5m/s (32knots)
- Erection condition:16.5m/s (32knots)
- Unexpectable condition (Full rotary beam load and full stands): 30.7m/s  (60knots)
- Expectable condition(Full rotary beam load ):38.6m/s (75knots)
- Equipped with two sets of buffer hydraulic cylinders, which can be used for raising and
lowering the mast.
- 2 mast ladders -without cage (one each to monkey board & crown block)
- With hange line for hanging travelling system(include Top drive) when drilling line cutting;
including wirelines,shackles.
- With levelling shims and two (2) 100 tons each hydraulic jacks with hand pumps.
- Four(4) 2t Derrick Hoist Blocks with secondary retention are used.
- Two(2) 4t Derrick Hoist Blocks with secondary retention are used. 
- With Mast Raising Line Ø80mm( 3 1/8")
- With Mast Support Frame:Using for supporting mast during Rig-Up & Down
- 1 ea. SALA Self-retracting fall arresting devices & Derrick safety harness with frontal 
pad for the derrick man to be installed above the derrick board for the derrickman(15m), 
- 1 ea.SALA Self-retracting fall arresting devices & Derrick safety harness with frontal pad
for the derrick man to be installed above exit point from the mast ladder to the derrick board
platform at the mast ladder side(15m).
 
A.1.2. Monkey Board - Qty : 1 set
Monkey board to support : 
- 286 stands of 5-1/2" Drill pipes(8000m);
- 6 stands of 8" D/Collars;
- 3 stands of 10" D/Collars;
- 2 stands of 14" D/Collars. 
- With adjustable centre diving board and hinged extension. Adjustable 80ft 4-1/2",83ft 8",86ft11-1/4"
(24.5m,25.5m,26.5m) above drill floor level complete with safety chains on all fingers.With
Mounting bracket to accommodate pullback air winch. Access platform with handrails and 
escape line (with easy and safe access) . Logo on the monkey board can be painted as 
clients requirement.Without Wind Wall.
 
A.1.3. Tubing "Belly" Board - Qty : 1 set
- Tubing "belly" board.
- Features: Completed with walkway and handrails in the outside of tubing belly board.
 
A.1.4. Casing Stabbing Board - Qty : 1 set
- Pneumatic Casing stabbing board – adjustable from 20ft - 50ft above rig floor, having two braking
devices withone being failsafe. Both locking devices are independent of each other.
- Operations to be independent of casing tongs.
- The casing stabbing board is equipped with upper and lower limit switches.
- Guardrails and fall protection system will be installed(SALA Fall arrest 3400900).
Full body harness with lanyard as per BS or ANSI or equivalent International Standards
( 1piece as SALA recommend)
- Adequate anchor points anchor point to be available for connecting the lanyard and
Self-retracting fall arresting devices with full body harness. Anchor points will be positioned
independently from the movable stabbing board assembly.
- The stabbing board platform to be installed with one certified safety line,the safety line
will connect stabbging board with one padeye on Mast.
- Air winch on Casing stabbing board:
- Remote pendent control
- Control cord with emergency stop.
 
A.1.5. Mast Emergency Escape system - Qty : 1 set
- Mast Emergency Escape system with accessories and user manuals
- Mittelmann Mast emergency descent device RG 10D(EN standard)
- The models will be suitable as per the mast / monkey board height and as
per manufacturer recommendations.
- The PPE & accessories used in the system for emergency escape willl be
as per the manufacturer requirements, included Satey Harness and anchor block
 
A.1.6. Derrick Climbers Assist Lines - Qty : 3 set
- Derrick climbers assist lines(one each to monkey board & crown block) complete
with lines,certified snatch block. climber assistor, 3 sets.
 
A.1.7. Crown Block - Qty : 1 set
- Crown block rated for 1,500,000 lbs/750ton/6750KN static hook load capacity with :
- Seven (7) sheaves cluster of 1524mm(60 inch) sheaves;
- One(1)fast line sheaves  1524mm(60 inch);
- All grooved for φ42mm (1 5/8") drilling line;
- Confirming to API Spec.8C 5th Edition and API Spec 4F latest Edition, PSL1,  SSL: E2 U2;
- To be API monogrammed, Possessing valid API-4F and 8C certificate.
- Two (2) 4t Hoist Blocks with secondary retention are used.
- Two(2) 12t Hoist Blocks with secondary retention are used.
- One (1) 25t Hoist Blocks with secondary retention are used.
 
A.2. Subbase and Associated Equipment - Qty : 1 set
A.2.1 Subbase :
- Rated for 1,500,000 lbs/750ton/6750KN casing load capacity simultaneous with
800,000 lb./400ton/3600KN setback capacity. 
  - Rig floor dimensions: 13m×14.8m/42.6ft×48.5ft
  - To be API monogrammed, possessing valid API- 4F certificate.
- Confirmed to API 4F 4th edition, PSL1, SSL: E2 U2.
- Steel material
- Welding Procedure as per AWS.
- Drill floor height(from Ground to drill floor): 46.92ft/14.3m;
- Drill floor clear height(from bottom of rotary table beam to Ground):  42ft/12.8m;
- Sub base with clear height under BOP trolley beams:36ft/10.97m (from bottom of 
BOP trolley  beams to Ground).
- Substructure type: Sling shot.
- Two(2) Stairways for access from rig floor to ground level and One(1) Stairways
for access from rig floor to mud tanks.
- One(1) 2ft wide safety slide for emergency escape slide from rig floor to ground level.
- Equipped with two sets of buffer hydraulic cylinders, which can be used for
raising and lowering the substructure.
- One stand pipe vertical skid.
- One hanger frame for 2*1.5m³ air receiver.
- Structure to be installed at lower floor position. After mast raised, substructure
to be raised up with floor equipments by two(2) hydraulic winch which are included.
- With Substructure Raising Line Ø38mm( 1 1/2")L=325m
- With Rig floor dog house(one air conditioner included),1 set;
- With tool house,1 set.
- With 2 ea. SALA Self-retracting fall arresting devices with Derrick safety harness
with frontal pad to be installed under the Fix anchor point around BOP beams (15m).
- With 1 set Antiskid floor mats for the rig floor, only for main working area of rig floor.
(The area between the setback and drawworks , inside left and right mast leg.)
- With 1 set Drilling Bell nipples for 29-1/2" diverter, 18-3/4" Bops.& 12" Flow line.
 
A.2.2. A Secondary BOP Retention System - Qty : 1 set
A secondary BOP retention system below the sub-structure with safe rated
pad eyes along with accessories including but not limited to wire rope slings,
shackles, pins, chains, hooks etc for the holding the heaviest BOP stack
shall be in place to prevent BOP falls in case of failure of primary retention
system (BOP hoist) system during casing slip setting, casing cutting and
other activities.
 
A.2.3. Drip Pan System under Rig Floor - Qty : 1 set
- Drip pan system under Rig Floor.
- Rig floor to be sealed with all drainage from the rig floor contained in a drain
system for discharge to location.
 
A.2.4. The Safe Working Load (SWL)
The Safe Working Load (SWL) will be prominently marked for all Pad eyes on
Mast and Substructure
 
A.2.5. Mouse Holes - Qty : 1 ea
Mouse holes, 12" OD and 16" OD.
 
A.2.6. Mechanical Conventional Catwalk - Qty : 1 set
- Mechanical Conventional catwalk size:18000mm(L) ×1500mm(W) ×1070mm(H), two sections.
- Catwalk fitted with 2 each cementing lines & kill lines of 2"IDx 15 M, having slide/ sling gate at Rig .
- The kill line is only fixed under catwalk, and wont lay to ramp and drill floor.
- Cementing Lines and Kill Lines on Catwalk are made by Chinese vendor,  as per API 16C;
- Valves on cementing lines and kill lines are from western brand vendor.
 
A.2.7. Pipe Rack - Qty : 10 pcs
- Triangle pipe rack, length 9000mm, height 1070mm, end with retaining pin
 
A.2.8. BOP Lifting Hoist System - Qty : 1 set
- BOP lifting hoist system, 150-ton capacity 
- Trolley beams mounted on the substructure under the drilling floor with travel of the BOP
hoists is to cover the entire length of sub base.
 - Max. hoisting capacity:2×75ton
 - Max. hoisting height:4.8m
 - Max. hoisting speed:0.6m/min
 - Max. lowering speed:1.0m/min
 - Max. horizontally travelling speed:6m/min
 - Max. working pressure of hydraulic system:21Mpa
 - Max. flow rate of hydraulic system:120L/min
 - Wireline diameter:44mm
- With One (1) Hydraulic Power unit (Electrical Motor Drive) is used for substructure up/down & BOP
lifting hoist system
 
A.2.9. Hydraulic Power Unit for Hydraulic Tools - Qty : 1 set
- Hydraulic power unit For hydraulic tools
- Hydraulic unit complete with two (2) hydraulic pumps each driven by electric motors mounted
at derrick floor, for use with rig-floor auxiliary equipment.
- Max.pressure: 3000psi/21MPa 
- Rated pressure: 2320psi/16MPa 
- Rated  output flow: 120L/min
- Effective volume: 1000L
- Main power input: 55kW x 2
 
A.2.10. Drilling Line Spool for drill line complete with air/hydraulic motor.  - Qty : 1 set
- Model:DSJ45Q
- Output drum speed : 0~13r/min
- Output torque:14000N.m
- Max.working air pressure: 0.8Mpa
- Max.load: 20000kg
- Suit wireline:42mm( 1-5/8")×7500ft
 
A.3. Draw Works
A 3.1. AC  Electric Draw Works 
AC Electric Draw works  - Qty : 1 set
 - Rated for 2200KW(3000HP)input power;
 - Nominal depth range up to 30,000 ft;
 - Powered by two(2) 5GEB28, 1118kw/1500HP, 600V,Make: GE. With IECEX/ATEX
 - Disk Brakes  (PSK Model:PS295/6750D) on main drum as fail-safe emergency / parking brake.
- Standard Disc Brake System with air-cooled Discs, 6 x hydraulic service calipers,
4 x Spring-set safety calipers, independent hydraulic power station , and Control Console. 
- Working brake torque:295kN.m,Parking release brake: 190kN.m,Emergency brake: 485kN.m
 - Max. fastline pulling capacity:141,000lbs/640KN
 - Pulling capacity - 1,500,000/6750 Static hook load@ 14 lines.
- Drum size:Φ915mm×1836mm,The drum is casting part with lebus grooved for 42mm( 1-5/8')  wireline.
( welded,replacable after worn )
- The drum shaft is driven by two (2) sets of two-shift gear box.
 Steps of speed: 2+2R(2 steps)
 Gear Box ratio:High speed:8.056,Low speed:14.783
- Equipped with pneumatic toggle valve anti-collision device.
- Kinematics draw works brake monitor and control system (Crown saver and floor saver:This is refer to 
Anti Collision System (ACS) Ingrated in VFD and Drillers Control - Cabinet system).
Crown saver / Crown-O-Matic, with emergency activator switch on Drillers console.
 
A 3.2. Auxiliary Brake System - Qty : 1 set
- AC –VFD Rig using regenerative braking, disc brake on main drum to be capable of being
used as Auxiliary brake which included in Item A.3.1
- Disk Brakes  (PSK Model:PS295/6750D) on main drum as fail-safe emergency / parking brake.
- Standard Disc Brake System with air-cooled Discs, 6 × hydraulic service calipers,
4 × Spring-set safety calipers, independent hydraulic power station , and Control Console. 
- Working brake torque:295kN.m,Parking release brake: 190kN.m,Emergency brake: 485kN.m
- Rated pressure of hydraulic disc brake operating system: 8 MPa
- Hydraulic power station of disc brake(Air cooling) Model:PY-01F  
- Rated pressure : 8Mpa
- Rated to suit minimum static hook load capacity 1,500,000 lbs of draw works.
 
A 3.3. Electronic Automatic Drilling System - Qty : 1 set
- Electronic automatic drilling system
- Achieved by Seperater Motor control, integrated in VFD system.
- Electronic feed for draw works controls to provide ROP control based on constant ROP,
Weight on Bit., differential pump pressure and torque.
- Four alternative modes include :
 - ROP----rate of penetration
 - WOB----weight on bit
 - MPP----mud pump pressure
 - DPT----drill pipe torque                                                                                                                       
- WEG Auto bit driller motor  Model:W22Xd-75kW-4-280S  Fundamental frequency power: 75kW                                                                                   
- Fundamental frequency torque : 401 N.m                                                                                       
- Cooling type: Forced air cooling,                                                                                              
- Protection degree of motor : IP56, with IEC explosion-proof certification.   
 
A 3.4. Makeup/Spinning Cathead - Qty : 1 set
- Makeup/Spinning Cathead(Telescope Type)
- Rated working pressure:2320psi/16MPa;
- Rated flow rate:120L/min;
- Wireline pulling force:350,000lb/ 160KN;
- Norminal rope stroke 1500mm
 
A 3.5. Breakout Cathead - Qty : 1 set
- Breakout Cathead(Telescope Type)
- Rated working pressure:2320psi/16MPa;
- Rated flow rate:120L/min;
- Wireline pulling force:350,000lb/ 160KN;
- Norminal rope stroke 1500mm
 
A4 Travelling Equipment
A4.1. Travelling Block 750-ton Capacity - Qty : 1 set
- Travelling Block 750-ton/6750KN capacity .
- Number of sheaves:7
- Sheave diameter:φ1524(60")
- Grooved for  φ42mm(1-5/8') wireline.
- Conforming to API 8C  5th Edition PSL1 
- To be API monogrammed, possessing valid API-8C certificate.
- With one(1)Hydraulic wireline cutter.
        -  Max. cutting diameter :48mm; Max.shearing force:20T;
- With six(6) Snake line for wireline stringing.
        -  Natural length 1600mm,Traction force 40KN.
 
A4.2. Weldless Elevator Links - Qty : 1 set
Weldless elevator links, 4-3/4" x 252", 750 ton capacity. Conforming to API 8C,PSL1
 
A4.3. Weldless Elevator Links  - Qty : 1 set
Weldless elevator links, 3-1/2" x 144", 500 ton capacity. Conforming to API 8C,PSL1
 
A4.4. Weldless Elevator Links  - Qty : 1 set
Weldless elevator links, 2-3/4" x 132", 350 ton capacity.Conforming to API 8C,PSL1
 
A4.5. Weldless Elevator Links  - Qty : 1 set
Weldless elevator links, 2-3/4" x 252", 350 ton capacity. Conforming to API 8C,PSL1.
 
A4.6. Drilling Line - Qty : 7500ft
φ42mm(1-5/8') Drilling line to suit minimum static hook load capacity.
Right hand, as per API Spec.9A.
 
A.5. Rotary Group and Top Drive
A.5.1. 37-1/2” Rotary Table - Qty : 1 set
- Heavy Load 37-1/2" rotary table:
- Max.Static Load:7250KN;
- Rated Speed:300RPM;
- Gear Ratio:3.62;
- Max.torque:45000N·M(@0-110RPM);
- Make: BOMCO,holding valid API-7K certificate.
- Main AC Motor: 5GEB22A5, 858KW, 600V,Make: GE. With IECEX/ATEX
- Rotary table independent drive device:
    - Reducer:  i=1.6920
    - Coupling: BJS435A 
    - Cardan shaft:BHJ350F530
    - Inertia brake:5022A
 
A.5.2. Rotary Table Master Bushing and Insert Bowl - Qty : 1 ea
- Complete with a ZP375 master bushing (MPCH), with the following insert bowl:
 - Split insert bowl # 1 (11-3/4" – 13-3/8"),1 pc
 - Modified Split insert bowl # 1 (to handle 14"tubulars),1 pc
 - Split insert bowl # 2 (9-5/8" – 10-3/4"),1 pc
 - Split insert bowl # 3 (2-3/8" – 8-5/8"),1 pc
- Lifting hook for removing and installing bushings and bowls( 2 hooks for bowls,4 hooks for bushing).
 
A.5.3. Casing Bushing - Qty : 1 ea
- Casing bushing, split type for 30",24" and 18-5/8" casing.
 
A.5.4. False Rotary Table - Qty : 1 set
- False rotary table suitable for running 5-1/2" drill pipe string inside 30" ,24" and 18-5/8"  Casing.
- Rated load capacity 200 tons.
 
A.5.5. Electrical AC or DC powered Top Drive System - Qty : 1 set
- Electrical AC powered Top Drive System
- Model DQ90BS-JH
- Rated Hoisting capacity 750 tons.
- Power Supply 600VAC/50Hz
- Main Motor Rated Power  2X450KW(continuous)
- Drilling Torque 76KN·m
- Max. Break-out Torque 120KN·m
- Rotary Speed 0~220r/min
- Backup Tong Range φ87mm~φ230mm
- Mud Circulating ID Φ89mm
- Equipped with top drive body, top drive guide rail, top drive travelling cable, top drive
VFD room, driller control console.
 
B Mud System
B.1. High Pressure Mud System
B.1.1. Triplex Mud Pump Unit - Qty : 3 sets
- Triplex Mud Pump, Rated input 1600 HP
- Model ·F-1600HL
- Rated power:1600HP
- Rated stroke:120spm 
- Stroke length : 12"
- Ratio:4.206:1
- Max. working pressure:52Mpa
- Valve cavity:API 7#
- Max. liner size:7"
- Inlet flange:12" (305mm)
- Outlet flange:5 1/8"
- Shear pin type safety valve:JA-3
- AC motor
- Qty.: 1 pc for each pump
- Rated power:1200kW
- Rated voltage:600V                                                                 
- Explosion proof standard: CNEX
 
B.1.2. WP Rotary Hose - Qty : 2 pcs
- ·4" ID x 75ft long x 7500 psi WP rotary hose,FSL Level 2,-20°C ~ 82°C, in accordance with API 7K
 
B.1.3. WP Bumper Hoses - Qty : 7 pcs
- ·4" ID x 15ft long x 7500 psi WP bumper hoses ,FSL Level 2,-20°C ~82°C, in accordance with API 7K
 
B.1.4. WP Dual Stand Pipe Manifold - Qty : 1 set
- 5"ID x 7500 psi WP dual stand pipe manifold with 5" ID 7500 psi WP  full opening gate
values feeding with 2 independent 5" x 7500 psi WP mud pump discharge lines coming
from a mud pump discharge  manifold. Mud pump Discharge manifold 7500 psi WP,
to be designed so that any of the 3 pumps can be lined up for 2 mud lines to sub base. 
- 2" x 7500 psi valves from manifold to upper kill line, lower kill line, cellar jet and one
for displacing cement, or other general circulating from rig floor level. 
- 2" x 7500 psi working pressure steel line with designated valve from rig floor
to choke manifold for reverse circulating. 
- Gate valve adopts welding valve.
- Stand pipe manifold include five(5) nos 5" gate valves and nine(9) 2" gate valve.
Ground HP manifold include ten(10) nos 5" gate valves and one(1) 2" gate valve.
- Gate valve will be from Demco, Union will be from Kemper
 
B2. Low Pressure - Mud Pump
Design Principals for Mud System
Mud Tank System :
• Mud system total capacity 4990 Bbl (usable) with active Mud system capacity:
1990 Bbls and reserve tanks of 3000 Bbls.
The volume of tanks calculate decrease 150 mm from the top surface of Tanks.
• All the solid control equipments sized for handling 1500 GPM mud.
• Capable of handling mud up to 21 ppg.
• All reserve pits are to be connected to the mixing system so that mud can be
transferred and treated  in any pit independently
• As much as practical, tanks to have no internal piping or obstructions.
Only suction pipe, mud guns, equalisers and dump valves will enter the tank.
Suction and Discharge lines to be run from all tanks for flexibility and rapid
weight and for lining up as active tanks.
• Double deck top for tanks( except shale shaker tank I Or a safe walkway
to eliminate piping or other obstructions on top deck. Sufficient service gates
in top deck. Piping to be kept below grating. 
• Mud trough sized for  1500 GPM(Mud trough on top of tank and below double deck)
• Where possible all valves to be outside the tanks and/or above mud level. 
All valve operators or handles to be below the grating level.
• All tanks to have 42" handrails.
• All tank compartments to have knife dumps and bottom feed to dump header.
• All tanks to have fixed, overhead sunshade cover with mist system
coving all mud system area.
• All suction valves on the mud tanks will be accessible from the surface for repairs
and contain high quality sealing components that are oil based mud compatible. 
• All the motors and control units to be explosion proof type
• One mud duty room is installed on the tank.
Low pressure mud system, Butterfly Valves and Unions.
 
B2.1. Centrifugal Pump - Qty : 11 set
- 6" x 8"-14 centrifugal pump with 75KW Explosion proof AC motor
 
B2.2. Centrifugal Pump - Qty : 4 set
- 2"×3"-13 centrifugal pump with 11KW Explosion proof AC motor
- Two(2) for trip tank, Two(2) for water cooling tank.
 
B2.3. Mud Processing /Treatment - Qty : 35 set
• Mud Agitators :
Impellar size 1140mm, Power 18.5KW, Qty  6 pcs
Impellar size 1040mm, Power 15KW, Qty  27 pcs
Impellar size 960mm, Power 11KW, Qty  1 pc
Impellar size 500mm, Power 2.2KW, Qty  1 pcs
 
B2.4. Mud Tanks
- Flat Bottom Tank, with slanted internal bottom. 
 
B.2.4.1 Shaker Tank I - Qty : 1 set
- Shaker Tank I comprising of the following pit compartments :
a) Sand trap:  100 bbls. Capacity with provision for long tapered dump
 
B.2.4.2 Shaker Tank II - Qty : 1 set
- Shaker Tank II comprising of the following pit compartments :
a) De-sander /Degasser tank - 200 bbl. capacity.   
b) De-silter pit -  200 bbl. capacity.
 
B.2.4.3 Intermediate Tank - Qty : 1 set
- Intermediate Tank comprising of the following compartments :
Compartment 1- 240  bbl.
Compartment 2 - 300 bbl.
 
B.2.4.4  Suction Tank - Qty : 1 set
- Suction Tank  - 500 bbl. Tank is partitioned in two equal size compartment.
 
B.2.4.5 Mixing Tank - Qty : 1 set
- Mixing Tank  comprising of the following compartments:
- Mix/Premix Tank for mixing  -150 bbl. 
- Mix/Premix Tank for mixing -200  bbl. 
- Pill/Slug Tank -100 bbl.
 
B.2.4.6 Mud Reserve Tank - Qty : 1 set
- Mud reserve storage tanks, each of 500 bbl. capacities. 
- Each tank divided into two (2) Compartments, each of 250 bbl.
 
B.2.4.7 Trip Tank& Water Cooling Tank - Qty : 1 set
Trip Tank& Water cooling tank are installed on the one skid. Trip tank - 120 bbl. capacity.
There are two compartments, each compartment is 60 bbl. 20m³ Water cooling tank
is used for drawworks gearbox, rotary gearbox, etc.
 
B.2.5. Shale Shaker
B.2.5.1 : Flow Dividers to the 4 shale shakers and 1 combo type shale shaker
with flow bypass. Flow Divider box to be capable to handle 1500 GPM of flow.  - Qty : 1 set
 
B.2.5.2 : 
- Derrick   Hyperpool / 4-Panel High "G"
- Linear motion Shale shakers powered with vibrating motors that produces
High G – 8 G force and with 4 panels with top feeding wiers . Along with
API-RP-13 C complaint replacement Screens (80 to 325 mesh sizes) to be
suitable for flow line temperature up to 200° F.
 - Qty : 4 sets
 
B.2.5.3 : Screens type – Pyramid - Qty : 1 lot
Screen Size :   80 , Qty : 20
Screen Size : 100 , Qty : 20
Screen Size : 120 , Qty : 20
Screen Size : 140 , Qty : 40
Screen Size : 170 , Qty : 40
Screen Size : 200 , Qty : 40
Screen Size : 230 , Qty : 40
Screen Size : 270 , Qty : 40
Screen Size : 325 , Qty : 20
 
B.2.6 Mud Cleaner - Qty : 1 set
- Hyperpool / 4-Panel High "G" Combo type Linear motion shale shaker of same
model as above shakers with combination of de sander and de silter on top .
(Combo type) to be lined up as 5th shale shaker) along with replacement
screens of above sizes. Desander and Desilter  will be capable of handling 
1500 gpm of mud.
- Three (3)-10" Desander Cones
- Twenty (20)-4" Desilter Cones
 
B.2.7 High Pressure low volume wash gun and mud ditch magnet at shakers - Qty : 1 ea
 
B.2.8 Decanting Centrifuge - Qty : 2 sets
- Variable Frequency Drive  Centrifuge
- 50 horsepower (37kw/60HZ/460V) – Main Drive
- 20 horsepower (15kw) – Back Drive
- With feed pump,10HP/460V/60HZ
 
B.2.9 Degasser - Qty : 1 set
- Derrick Vacu-Flo for handling 1200 GPM.
 
B.2.10 Mud Gas Separator - Qty : 1
- Mud Gas Separator
- “Poor Buoy” vertical mounted mud gas separator, 48” OD x 15ft high with 6” OD inlet
from choke manifold, 10” OD return line to shale shakers with mud seal of 15 ft 8” OD
vent line, 6” OD drain and all necessary piping to connect to choke manifold,
shale shaker tank and flare line.
 
- Detail information :
Type:HMGS1200-1.0A
Vessel dia.:1200m  
Working pressure: 1.0MPa    
Flow capacity:300~350m³/h
liquid inlet:DN150
liquid discharge outlet:DN250
With ignition device &70m flare line.
- To be certified by third party as per ASME 
 
B.2.11 14"Augers - Qty : 3 sets
- 14"Augers–  to carry cuttings from centrifuge, shakers &Desander/ Desilter to
mud cutting waste pits eliminating water-jetting.
 
B.2.12 Mud Hoppers
B.2.12.1 Mud Shearing / Mixing / Blending Integrated system (Lobestar from Vortex Venture) - Qty : 2 sets
- Mud Shearing / Mixing / Blending Integrated system (Lobestar from Vortex Venture ),
complete, incorporating shear flow loops, mixing hopper and blending manifold.
Flow rate of 1000 GPM each, 2000GPM in total.
 
B.2.12.2 6" mud mixer hoppers with 6" Venturi. - Qty : 2 sets
- Treatment Capacity:(200m3/h),
- Bore of inlet:6",Bore of outlet:6";
- Inlet pressure:0.3-0.6Mpa,Outlet pressure:0.1-0.2Mpa;
- Nozzle diameter:2"(50mm);
 
B.2.12.3 Hopper skid - Qty : 1 set
- Hopper skid has capacity to accommodate-  four (4) Hoppers, 
- Mud dock for material storage.
- Use the second floor of hopper skid as mud dock.
- Mud dock for material storage with jib crane capable to load chemical bags on all Hoppers .
- Air crane, Rated load: 3t , hositing height:6m
 
B.2.13 Mud Silo Table - Qty : 1 set
- Suitable stand / framework for installation of Deck Silos / Hammer Bins
- An indicative drawing of the Mud silo is enclosed.
 
B.2.14 Cellar jet - Qty : 1 ea
- Cellar jet constructed of 6" OD pipe with 2" NPT x 3/4" orifice jet nozzle nipple installed
in 90° long radius ell.  6" line runs from cellar bottom to mud tank with outlets to shale
shaker and reserve/waste pit.  Fluid is supplied to jet nozzle by 2" high pressure line
from stand pipe discharge manifold.
- With one FLYGT Submersible electrical explosion proof type pump,HT454 20HP added hose
 
C Power Package
C.1 Generator sets :  - Qty : 7 sets
Model: CAT3512B+SR4B,7sets
Engine power: CAT3512B,1101 bkW@1200 RPM
Generator sets: SR4B, 600V/60HZ, 980EKW c/w fan.
Totally 8 sets, generator houses included. 
 
 C.2 Auxilliary Generator  - Qty : 1 set
Model: CAT C18
480V/60HZ, 545KW c/w fan.
 
C.3 Rig VFD system - Qty : 1 set
- VFD system.
- Equipped with A/C control system, motor control panel, generator control equipment
and lighting panel, all located in  air-conditioned control room with suitable roof mounted AC units.
 
C.4 WellSite Ex-proof circuit and lighting - Qty : 1 lot
- WellSite Ex-proof circuit and lighting
- Rated Voltage:600V/110V
- Rated frequency: 60Hz;
- UL/IEC/ATEX/CNEX explosion-proof standard.
- Explosion-proof requirement:The Ex e or Ex d explosion proof is used for the drilling floor area.
- Distribution Box and Magnetic Starter Box
- Lightings(Flourescent type)
- Cables (Exane or equivalent) 
- Plus and socket
- Cable tray(including grasshopper and folding cable tray).
- Includes the  cable tray from VFD to solid control area, mud pump area,
drilling floor area (including the mast), and generator houses and to other support equipment.
 
D Rig Instrumentation, Control and Automation
D.1 Drillers Cabin cum Dog House - Qty : 1 set
- The cabin’s walls and the console are made of 304 stainless steel.
The main frame and base are made of carbon steel. The middle of the wall
insulation filling rock wool,well insulated.
- Dog house and cabin dimensions is 2750mm(W)x 7500mm(L)x 2950mm(H
)with attached cabin of 2700×2750mm.
- DCC designed to allow for ergonomics,positioned above the floor level
with safety windows with wiper system to allow clear view of the rig floor.
Have a good sight of mud pumps, monkey board and drawworks.
The windows are provided with safety nets and security bars. The glass
shall be made from Bullet-proof glass.
- The Drillers Cabin will have typical instrumentation/ equipment as listed below:
- Equipped with driller`s integrated chair. The drawworks operation and main
operation of Top drive can be realized on the driller chair and SIMATIC HMI.
- Draw works Joystick Controls,Top Drive Control.Drilling instruments and CCTV.
- One Ex-proof emergency lights .One Ex-proof power switch box.
- Drillers cabin  equiped with  two sets of  HVAC (Top mounted)  which
refrigerating capacity about 7kW. Doghouse equiped with two window
 Air Conditioner which refrigerating capacity about 5kW.
- Ex telephones. Rig alarm horns, fire extinguisher. 
- All plugs and receptacles for console connection.
- All operations are controlled from the Drillers Cabin.
 
D.2 Closed Circuit Television system (CCTV) - Qty : 1 set
- Closed Circuit Television system (CCTV) with recording and storage capabilities
for 2 wells backup data(24months),colour remote control camera system at
below the Crown block, Monkey Board, stabbing board and under sub
structure(all rotating camera,all explosion-proof type), with  explosion proof 
monitor(one display screen with four pictures) and controls at Drillers console.
and two monitors in both rig supervisor and toolpusher cabins.
- Working temperature:-30~60℃;
- Relative humidity:0-90%RH;
- Working voltage:120V-260V,47HZ-63HZ;
- The CCTV system consists of camera unit,controller,display screen,keyboard,
connecting cables.
 
D.3 Rig Instrumentation System - Qty : 1 set
- Electronic, Computer controlled rig instrumentation system,
MD Totco- Rig Sense3.21 control systems, incorporating  real-time
data acquisition for usage at rig, display and logging of all rig, pump pressure,
mud flow and volume information and alarm systems.
- Instrumentation system to be equipped with both Analog and Digital displays.
- Analog display is refer to Weight Indicator,pressure gause,etc.
- Suitable for area classification Class-1-Div-1.
- The system will provide for hard copy record of daily parameters and electronic
database storage and retrieval of data to common Windows based computer systems.
- System to cover the requirements under H.2.a to H 2.c through one system.
 
D.3.1 The system will provide for hard copy record of daily parameters and
electronic database storage and retrieval of data to common Windows based
computer systems.
 
D.3.2 The system will include the following measurements :
• Hook Load
• Block Position 
• Block Speed
• ROP
• Drilling Torque, Top Drive and Rotary
• Rotation speed, Top Drive and Rotary
• Tong line pull
• Mud Pumps; each pump & total all pumps
• Pump speed
• Pump strokes
• Total strokes
• Standpipe pressures
• Choke Manifold pressures
• Kill Line Pressure
 
D.3.3 MD Totco HMI as pit level (total 23nos mud leval sensors )and flow show
monitor system with alarm device complete with the following features :
• Total pit volume and individual tank volume for all active , mixing and reserve pits.
• Trip tank volume.
• Mud pit gain or loss in bbls.
• Mud flow as percentage of total flow.
• S. P. M. and continuous strokes for each mud pumps.
• Electronic digital monitoring/hard copy printout recording system for total volume and flow line
 
D.3.4 Will have Alarm Systems for
• Active Pit Level
• Mud return flow rate alarms; High/Low
• Rate of Penetration; High
• Pump Pressure; High/Low
 
D.3.5 The rig control system will be capable of automatic control of the following :
• Block Speed while running drill pipe, casing, tubing, etc., to rated maximum load.
• Block Proximity Limits; Crown & Floor
• Top Drive/Rotary Torque
 
D.3.6 Penetration rate while drilling, reaming, etc., based on;
• Bit Weight
• Pump Pressure differential. and 
• ROP limits
• Torque
 
D.3.7 Data Monitor System
- Data Display Monitors, independently configured, networked to data storage
system for real time or achieved display of all rig data, with graphical, analogue and
numerical display options :
• 1 Drillers Console(HMI)
• 1 Drillers Doghouse(HMI)
• 1 Contractors Office(Rigsens cilinet)
• 1 Operators Area Supervisor Office(Rigsens cilinet)
• 1 Operators Rig Site Supervisor Office(rigsense server)
• 1 Mud Lab(LCD Screen)
 
D.3.8 Data printer systems for hard copy data record, configurable for digital or
graphical output based on time or depth.
 
D.3.9 Data printer/recorder system dedicated to real time, 24 hour, continuous,
8 channel, graphical hard copy recording of critical rig data including;
• Hook Load
• Rate of Penetration
• Top Drive/Rotary Speed
• Top Drive/Rotary Torque
• Total Pump Speed
• Pump Pressure
• Return Flow Rate
• Pit Level
 
D.4 Deadline Anchor - Qty : 1 set
- Deadline Anchor JZG72E
- Max. deadline pulling force: 720KN;
- Output Pressure 9Mpa
- Output Pressure Error: ±1.0% FS
- Suit for M/D E551 Sensor
- With the MD Totco sensator and weight indicator.
 
D.5 Rig Intercom & Public Address System - Qty : 1 set
- Rig Intercom & Public Address System; Stations at all Operators Offices,
Mechanic Office, Senior Toolpushers Office, Drillers Console, Drillers dog house
Shale Shaker w/hood, Mud Tanks, VFD Cabin, Mud Loggers Cabin, End of
Catwalk for Cement Unit, Mud Engineer Lab, MWD unit, monkey board,
choke panel, and two spare units. 
- Explosion proof suitable for use in Hazardous areas and to withstand harsh
effects of environment
- Total of 17 stations required. 
- Manufacturer Gaitronics 
 
D.6 Rig Paging System - Qty : 1 set
Rig Paging System : For recording (the recording should be at lest 30days
and be shared by the contractor.) the instructions passed between Driller
and Tool Pusher or between Company Man and Tool Pusher. Explosion proof
suitable for use in Hazardous areas and to withstand harsh effects of environment.
Manufacturer : Gai-Tronics USA 
 
E Auxiliary Rig Equipment
E.1 Hoists
E.1.1 Rig Floor Winch - Qty : 3 sets
- Hoist, 10,000 lbs, one (2) located at drill floor, one (1) located at the end of catwalk.
Specification :
-  Air pressure :116psi/0.8MPa;
-  Max. pulling force :10,000 lbs/5T;
-  Rope capacity :120m;
- Wireline Dia. :Ø20mm(3/4")
 
E.1.2 Winch - Qty : 1 set
- Hoist, 20,000 lbs, located at drill floor on driller side for Drill Collars/ Heavy lifts.
Specification :
- Max. lifting capacity:100KN
- Max. rope speed:20m/min
- Rated power:30KW
- Rated air inlet pressure:0.8MPa
- Rated air consumption:24m3/min
- Rope capacity:120m
- Wireline diameter:24mm
 
E.1.3 Man Rider Winch - Qty : 2 sets
- Winch on rig floor, 330lbs/150 Kg capacity, Certified Man rider includes
external relief valve,operating valve, and testing ports.
- All on rig floor.
- Will be fail safe system.
- Man Rider Line Pull Rating:  330 lbs. (150 kg) on 2nd layer
- Man Rider Line Speed:  Variable, 0 - 98 fpm (30 m/min) on 2nd layer
- Wire Rope Storage Capacity: 505 feet (154 m) with 7/16 inch (10mm) dia.
wire rope on 5 layers
- ATEX Compliance:  Standard.  Includes drum guard, overload protection,
emergency stop, limit switch, muffler and ATEX marking.
- Testing :  Standard load test to 180% SWL
- Pressure:  75 psig (5 bar) – 105 (7 bar) at the air inlet (dynamic)
- Flow:  88 cfm (2.5 m3/min)
- 1ea on Rig floor and 1ea in Subbase
 
E.1.4 Racking Board Winch - Qty : 1 set
- 1-Tonne Utility Air Winch for Racking Board with remote operator pendant to function.
 
E.2 Air Compressors
E.2.1 Air Compressors  - Qty : 3 sets
- Air Compressors for 535 CFM at 145 psi/1MPa each equipped with dual controls,
including pipes valve fitting and two air receiver tanks of 600 gallons.
- Discharge Capacity: 535CFM(15.15m3/min)
- Rated Discharge Pressure:145psi(1.0MPa)
- Max.Working Pressure:154psi(1.06MPa)
- Cooling Type:Air cooling
- Max.Ambient Temperature:55℃
- Max.Dischage tepemerature:55℃+8~15℃
- Motor:90kW
- Air tank):four(4) total
- Two(2) 2.5m3 in Air house,two(2) 1.5m3 under sub-base
 
E.2.2 Air Dryer - Qty : 1 set
- Air Dryer to suit the air supply capacity of two air compressors working and one for spare.
- Model ; HD-25HTF, capacity: 27m3/min
- C/W one prepositive filter  and one postpositive filter.
 
E.2.3 Auxiliary Air Compressors - Qty : 1 set
- Quincy QT-7.5 Air Compressor –150 psi, driven by diesel engine for cold start application.
Features :
ACFM @ 175 psig: 22.0 
RPM: 990
 
E.3 Water, Oil and Fuel System
E.3.1 Drill water Storage tank - Qty : 5 sets
- Drill water Storage tank 500 bbl each
- Flat bottom,Top Opened
- 2 pcs of Centrifugal pump included, 600V,60HZ
 
E.3.2 Four compartment oil lubster for storage of oil lubricants - Qty : 1 set
 
E.3.3 450 bbl Diesel Fuel Tank - Qty : 1 set
- 450 bbl diesel fuel tank complete with circulating and filtration system for rig
engines and two (2) 1-1/2" x 2" transfer pumps. Double skin and level indicator .
 
E.3.4 450 bbl. Mud-Diesel Storage Tanks - Qty : 2 sets
- 450 bbl. mud-diesel storage tanks.  2 pcs
- Fuel storage tank with doubled walled type construction.
The storage tanks will be fitted with :
• Level indicators to know the volume of the contents in the tank. 
• Air breather with flash back arrestor
• Over flow line 
• Access/egress ladder
• 1set 3" x 4" mud diesel transfer pump for two mud-diesel storage tanks.
 
E.4 Rig Floor Tools
E.4.1 General Assembly Parts - Qty : 1 set
Air winch support, location block for generator house, guard rail, rotary table
cover plate, air tank bracket, mud umbrella, etc.
 
E.4.2 Hydraulic Wire Cutter - Qty : 1 pc
• Max. cutting diameter :48mm;
• Max.shearing force:20T;
 
E.4.3 Hydraulic Jack - Qty : 2 ea
30T,50T,100T
 
E.4.4 Wireline Stringing Unit : Ф42 - Qty : 6 pcs

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


--------------------------------------------------------------------------------------------------------
Search words (for official use only) :
3000HP Electric Deep Drilling Rig - For Sale
Deep Land Drilling Rig for Sale
3000hp Deep Drilling Rig for Sale
Electric Drilling Rig for Sale
New Electric Land Drilling Rig - 3000hp - for Sale

----------------------------------------------------------------------------------------------------

 
Ingersoll-Rand CM-780D Blasthole Drilling Rig for Sale
Worldoils Marketplace
Ingersoll-Rand CM-780D Blasthole Drilling Rig for Sale

Worldrigs ID: WR781

Ingersoll-Rand CM-780D Blasthole Drilling Rig for Sale
2003 Built Ingersoll-Rand CM-780D Blasthole Drilling Rig


Model : CM-780D Blasthole
Manufacturer : Ingersoll-Rand
Year : 2003
Condition : Used

Description :

2003 Ingersoll-Rand CM-780D Blasthole Drill Rig
Crawler Mounted
Caterpillar Diesel Engine
S/N: G78255EL
IR HR2 865 CFM / 350 PSI Air Compressor
Water injection
Hammer Lubricator
Thread Greaser
Enclosed Cab
A/C & Heater
Rod Changer
13-1/2" Track Shoes
Set up for (3-1/2”O.D. x 13.1ft) Drill Pipe 21/2Z thread
Meter Reads 15,940 Hours

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Ingersoll-Rand CM-780D Blasthole Drilling Rig - 2003 Built
Used Drilling Rig - Ingersoll-Rand CM-780D Blasthole
Ingersoll-Rand CM-780D Blasthole Used Drilling Rig
Ingersoll-Rand Drilling Rig for Sale in USA
Used Ingersoll-Rand Land Drilling Rig for Sale in USA
Gardner Denver 1000 Drilling Rig for Sale
Worldoils Marketplace
Gardner Denver 1000 Drilling Rig for Sale

Worldrigs ID: WR2744

Gardner Denver 1000 Drilling Rig for Sale
Drilling Rig - Gardner Denver 1000 - For Sale


Model : 1000 Drill Rig & Package
Manufacturer : Gardner Denver
Condition : Used

Description :

Gardner-Denver 1000 Drill Rig
14W Drawworks
7-1/2" Rotary Table
Rated for drilling to 1000 ft
Dis-assembled for rebuild
Deck steel replaced in preparation for rebuild
Comes with all components necessary to rebuild back to original specs:
2-stage mast cylinder
3- large 8-1/2 ft outriggers
Piston style WX 1004 compressor (stored inside building)
Gardner-Denver FXG 5x6 mud pump (stored inside building)
24 ft 3-3/8" fluted kelly bar
Little Giant Swivel
Mayhew block for 1000 rig 12" single sheave
292 ft of 3-1/2" flush drill pipe

- 16 ft skid for set up for Gardner Denver 5x8 mud pump, Detroit 353 Diesel
Engine with Rockford clutch (1600 hours), with 150 gallon fuel tank
- GMC 6-71 Power Unit with Rockford clutch, Rotary table slips, Blue Demon
- Drag Bit 5, spools of cables, assorted bit breakers, 2" relief valve, pipe clamps
and pick up heads, compression coupling and 4" valve, steel mud tank
- 2-3/8" IF to 3-1/2" Reg pipe to bit tubs, pipe spider rings, Rotary Table
- Drill Up slips, shop built collars, T-Pipe for starter, cross over sub adapters, Tool
holder for pipe in table, Petol chain wrenches, regular chain wrenches, Set of
banded v-belts for mud pump skid, 2 rods for GD gear end, bull gear and
eccentric, 2 pairs of sleeves for GD 5x8, valves caps for GD 5x6, cylinder head
for GD 5x6, safe guard and Dodge gear boxes for mud pumps, pinion gear for GD
5x8 duplex 90%, new electric motors 1/2 HP - 3/4 HP - 1 HP stub shaft, power
tower for Keystone Gardner Denver, miscellaneous bits
- 1973 Ford 8000 truck
- Caterpillar 3116 diesel engine
- 10-speedRoadranger transmission

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Gardner Denver 1000 Used Drilling Rig for Sale
Land Drilling Rig - Gardner Denver 1000 - for Sale
Used Land Drilling Rig for Sale in USA
Used Gardner Denver 1000 Drilling Rig for Sale in USA
Gardner Denver 1000 Land Drilling Rig for Sale

-------------------------------------------------------------------------------------------------------
 
Small Coastal Container Vessel
Worldoils Marketplace
Small Coastal Container Vessel

Worldrigs ID: WR722

Small Cargo Ship For Sale
Small Container Vessel For Sale
Coastal Container Vessel


General
Type : General Cargo Ship
Year of delivery : 1978, rebuilt / boxed 1983
Classification : DNV
Gear/gearless : Gearless

Vessel Particulars
Length o.a. : 88,00 m
Length p.p : 84,00 m
Beam : 12,70 / 12,96 m
Draft max summer : 5,08 m ; 4,97m
Airdraft : 24,30 m; ballast 21,50 m; loaded 19,3 m
Gross tonnage : 2020 mt
Net tonnage : 1000 mt
Deadweight : 3016,9 / 2913,7, mt
DWCC Summer : abt. 2800 mt
DWCC Winter : abt 2700 mt

Hatch and Hold
No. of holds/hatches : 1 hold / 2 hatch
Hatch cover type : Poontoon
Hold dimensions : 1 hold but a strong beam; 57,0 m x 10,0 m x 6,86 m
Hatch dimensions : Aft 38,50 m x 10,0 m and forward 12,90 m x 10,0 m
Grain/ Bale Space : Abt. 130.246,82 cbft
Strength : on tanktop: 6 mt / sqm ; on deck : abt. 1.40 mt/sqm
Tweendeck : No
Bulkhead : No, 1 beam

Technical details
Main Engine : MWM TBD500B, 2200 BHP
Aux Engines : Scania DC 1101 MO INV – 2 pcs
Shaft generator : No
Emergency / Harbour generator : Scania D1101 AOGNV
Bowthruster : Bow 300 HP
Speed : abt. 9,5 kn always subject good weather conditions / bf 2 / no swell

Consumption per day
at sea abt. 4,7-5,3 mt MGO DMA
at port abt. 0.3 mt MGO DMA

Tank capacities
MGO abt. 145 cbm
ballast abt. 843 cbm
freshwater abt. 32 cbm

Container Capacity (20')
Hold : 60
Deck : 36
Total : 96 (20')
Reeferplugs : No

Accommodation : 8 persons, 8 cabins

Class : + 1A1 R1 general cargo carrier container HC EO

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------
Search words(for official use only) :
Small Cargo Ship for Sale
Small Container Vessel For Sale

General Cargo Ship
Small Cargo Ship For Sale In Europe
Coastal General Cargo Vessel
Coastal Container Vessel

---------------------------------------------------------------------

 

 
   
1 2 3 4 5 6 7 8 9 10
  


Featured equipments for sale
 
201ft Fast Supply Vessel for sale
Worldoils Marketplace
201ft Fast Supply Vessel for sale

Worldrigs ID: WR2797

201ft Fast Supply Vessel for Sale
FSV - 2014 Built for Sale


Description :

General
Vessel Type : FSV - Fast Supply Vessel
Vessel Class : Crew Boat
Year Built : 2014
Classification : ABS

Dimensions
Dimensions : 201 ft. X 32 ft. X 14 ft. 6 in. (61.26 m X 9.75 mX 4.42 m)
Length Overall : 200 ft.Clear Deck140 ft. x 26 ft. 6 in. (42.67 m x 8.08 m)
Deck Length : 191 ft. (58.22 m)
Cargo Deck Area : 3,710 sq. ft. (344.67 sq. m)
Deck Cargo Capacity : 395 LT (401.34 MT)
Deadweight Tonnage : 488 LT (495.83 MT)

Capacities
Fuel Oil : 40,000 gals. (151.42 cu m)
Ballast : 68,230 gals. (258.28 cu m)
Potable Water : 900 gals. (3.41 cu m)
Lube Oil : 840 gals. (3.18 cu m)
Waste Oil/Bilge Oil : 420 gals. (1.59 cu m)

Special Features
Positioning : DP 2
Steering and Controls : Four (4) IMS 5 HP Electro/Hydraulic
Steering Units, Three (3) Stations

Firefighting : Two (2) Monitors @ 6,000 GPM each CO2
Fire Suppression and Alarm Monitoring Systems

Oil Dispersant System

Machinery
Main Engines : Four (4) 3512C CAT Diesels,  2,250 BHPeach @ 1,800 RPM
Bow Thrusters : Two (2) 200 HP Thrustmaster  30TT200-ALTunnels
Speed : 28 knots
Generators : Two (2) CAT C9 @ 80 kW

Electronics
Electronics Package :
Two (2) Furuno FAR2117 Radars, One (1) ICOM M504 VHF Radio,
One (1) Sea 235SSB Radio, One (1) Depth Recorder, One (1) Navtex Receiver,
One (1) Color Video Sounder, One (1) GPS, One (1) RLB-32 EPIRB, One (1) Loud
Hailer, One (1) Ideal G2HC Windlass, One (1) AIS, Marine Technologies DP 2
Integrated Vessel Control System

Accommodations
Accommodations : 4
Passengers : Normal Operations : 54
Passengers : Safety Standby : 86

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
201ft Fast Supply Vessel for Sale
FSV - 2014 Built for Sale
Fast Supply Vessel for Sale
Crew Boat for Sale
ABS Class FSV for Sale

-------------------------------------------------------------------------------------------------------
Available for selling

201ft Fast Supply Vessel for Sale
Contact Us
ID 2797
300 FT Platform Supply Vessel
Worldoils Marketplace
300 FT Platform Supply Vessel

Worldrigs ID: WR2794

300 FT Platform Supply Vessel
2003 Built Offshore Supply Vessel for Sale


Description :

General
Vessel Type : Methanol Carrier Vessel
Vessel Type : PSV - Platform Supply Vessel
Vessel Class : OSV - Offshore Supply Vessel
Year Built : 2003

Dimensions
Dimensions : 300 ft X 60 ft X 24 ft (91.44 m X 18.29 m X7.32 m)
Length Overall : 300 ft.
Draft (Lightship) : 7.76 ft. (2.37 m)
Draft (Loadline) : 19 ft 1.313 in. (5.82 m)
Freeboard (Loadline) : 4 ft. 10.625 in. (1.49 m)
Freeboard (Lightship) : 16 ft. 2.813 in. (4.95 m)
Clear Deck : 223 ft x 50 ft 7 in (67.97 m x 15.42 m)
Cargo Deck Area : 11,280 sq. ft. (1,047.95 sq. m)
Deadweight Tonnage : 4,791.88 LT (4,868.78 MT)

Capacities
Fuel Oil : 295,937 gals. (1,120.24 cu. m)
Ballast321,265.2 gals. (1,216.12 cu. m)
Potable Water : 32,998 gals. (124.91 cu. m)
Dry Bulk : 11,440 cu. ft. @ 80 psi (323.94 cu. m @ 5.5bars)
Liquid Mud : 15,644 barrels (2,487.2 cu. m)
Methanol : 1,836 barrels (291.9 cu. m)

Special Features
Tuggers : Two (2) x 4 Tons
Ship Motion : Two (2) Passive Type Anti-Roll Tanks
Ship Motion : Bilge Keels
Positioning : DP 2
Deck Crane : One (1) x 3,100 lbs. capacity

Machinery
Main Engines : Two (2) CAT 3608 Diesels
Total Propulsion HP : 6,600 HP
Bow Thrusters : One (1) 1,100 HP Swing Up
Bow Thrusters : One (1) 1,300 HP Tunnel
Stern Thrusters : One (1) 1,300 HP Tunnel
Speed : 12 knots
Generators : Two (2) x 910 kW, One (1) x 190 kW emergency

Life Saving Equipment
Life Rafts : Two (2) x 25-Man Inflatable Life Rafts
Life Rafts : Two (2) x 20-Man Inflatable Life Rafts
Life Rafts : Two (2) x 10-Man Inflatable Life Rafts

Rescue Boat/Craft :
FAST RSQ 450A 6-person Rescue Boat SOLAS and USCG approved

Other gear as required by authorities

Flow-Back / Chemical
500bbl Approvals :
12 x 500bbl TANKS (6,000 barrels) Onvessel deck - (8) tanks are capable of
carrying hazardous material (8x500bbl =4,000 barrels), All 12 tanks are capable
of carrying pollution material. Flow-Back carriage requires USCG approvals of
chemicals prior to carriage

Electronics
Furuno 2115 Radar System, Furuno FE-700 Depth Sounder,
Furuno NX-500 Navtex Receiver, Furuno DGPS Navigation
System, Furuno RC1515 GMDSS, Felcom 12 Inmarsat-C,
DSC AA50 Watch Receiver, DSC Encoder/Decoder Terminal,
EPIRB ACR 406 Electronics, SART ACR Electronics, Sea
Tel Satellite Telephone, Furuno DSC 60 Receiver, Furuno
FM 8500 VHF Radios, AD-100 Gyro Converter, FS 1562/15
SSB (Single Sideband Radio), RadaScan Guidance Navigation

Accommodations : 29

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
2003 Built Offshore Supply Vessel for Sale
OSV - 300 FT - For Sale
ABS Class OSV - 2003 Built - for Sale
Platform Supply Vessel - 29 Bunks - For Sale
2003 Built PSV for Sale

-------------------------------------------------------------------------------------------------------
Available for selling

2003 Built Offshore Supply Vessel for Sale
Contact Us
ID 2794
2004 Built Platform Supply Vessel for Sale
Worldoils Marketplace
2004 Built Platform Supply Vessel for Sale

Worldrigs ID: WR2795

2004 Built Platform Supply Vessel for Sale
280FT PSV for Sale

Description :

General
Vessel Type : PSV - Platform Supply Vessel
Vessel Class : OSV - Offshore Supply Vessel
Year Built : 2004
Classification : ABS, USCG, SOLAS, MARPOL

Dimensions
Dimensions : 280 ft X 60 ft X 24 ft (85.34 m X 18.29 m X 7.32 m)
Length Overall : 280 ft.Draft (Lightship)7 ft. 3 in. (2.21 m)
Draft (Loadline) : 19.24 ft. (5.87 m)
Clear Deck : 203 ft 6 in x 50 ft 6 in (62.03 m x 15.42 m)
Cargo Deck Area : 10,293 sq. ft. (956.25 sq. m)
Deck Strength : 1,200 lbs/sq. ft. (5.86 MT/sq. m)
Deck Cargo Capacity : 2,700 LT. (2,743 MT)
Deadweight Tonnage : 4,898.7 LT (4,976.6 MT)

Capacities
Fuel Oil : 299,672 Gallons (1,134 m3)
Ballast : 303,093 Gallons (1,147.33 m3)
Potable Water : 32,690 Gallons (123.7 m3)
Dry Bulk : 11,440 cu. ft. @ 80 psi (323.94 cu. m @ 5.5 bars)
Liquid Mud : 15,644 Barrels (2,487.2 m3)
Methanol : 1,836 Barrels (291.9 m3)

Special Features
Ship Motion : Two (2) Passive Type Anti-Roll Tanks
Ship Motion : Bilge Keels
Positioning : DPS - 2
Deck Provision Crane : One (1) x 3,100 lbs. Capacity @ 30ft Fixed Boom

Machinery
Main Engines : Two (2) x CAT 3608, 3,299 HP (each)
Bow Thrusters : One (1) x 1,200 KW Schottel STT 1010 TLKCP
Stern Thrusters : One (1) x 1,200 KW Schottel STT 1010 TLKCP
Swing Down Combination Thruster : One (1) x 1,100 HP Ulstein TCNC 73/M-180
Speed : 13 knots
Rudders : Two (2) Independent High Lift Type Rudder Systems
Propellers : Two (2) x Schottel SCP 077-1 XG 2,700mmDiameter (CPP)
Emergency Generators : One (1) x 190 KW, CAT 3306 (Radiator Cooled)
Ships Service Generators : Two (2) x CAT 3508B 910 KW (each)
Shaft Generators : Two (2) x ABB AMG 500 L 4 (2.0 mW each)

Life Saving Equipment
Life Rafts : Four (4) x 25-Man Inflatable Life Rafts
Life Rafts : Two (2) x 10-Man Inflatable Life Raft

Rescue Boat/Craft : One (1) x Fast RSQ 450A - 6 person capacity,
40 HP motor, Solas/USCG approved

Flow-Back / Chemical
Flowback Approvals :
Two (2) x On-Deck Flow-Back/Chemical Carriage Tanks
(7,100 Barrels Total Capacity Both Tanks)

500bbl Approvals :
8 x 500bbl tanks (4,000 barrels) onvessel deck - All (8) tanks are capable of
carrying either hazardous or pollution material.Flow-Back carriage requires USCG approvals of chemicals prior to carriage.

Accommodations
Accommodations : 29 Bunks - (8 x 2 Person, 3 x 4 Person, & 1 x1 Person)

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
2004 Built Platform Supply Vessel for Sale
280FT PSV for Sale
Offshore Supply Vessel for Sale
PSV - 2004 Built - For Sale
280ft OSV for Sale
29 Bunks PSV for Sale

-------------------------------------------------------------------------------------------------------
Available for selling

2004 Built Platform Supply Vessel for Sale
Contact Us
ID 2795
2009 Built Platform Supply Vessel for Sale
Worldoils Marketplace
2009 Built Platform Supply Vessel for Sale

Worldrigs ID: WR2796

2009 Built Platform Supply Vessel for Sale
Offshore Supply Vessel for Sale


Description :

General
Vessel Type : PSV - Platform Supply Vessel
Vessel Class : OSV - Offshore Supply Vessel
Year Built : 2009
Class : ABS, USCG, SOLAS, MARPOL

Dimensions
Dimensions : 280 ft x 60 ft x 24 ft (85.34m x 18.29m x7.32m)
Length Overall : 280 ft.
Draft (Lightship) : 7 ft. 3 in. (2.21m)
Draft (Loadline) : 19.44 ft (5.87m)
Clear Deck : 201 ft x 50.5 ft (61.27m x 15.40m)
Clear Deck Area : 10,151 ft2 (943 m2)
Deck Strength : 1,200 lbs/sq. ft. (5.86 MT/sq. m)
Deck Cargo Capacity : 2,545 LT (2,585 MT)
Deadweight Tonnage : 4,729.14 LT (4,806.39 MT)

Capacities
Fuel Oil :  
(Ship/Cargo)375,994.6 Gallons (1,423.29 m3) (NOTE:Cargo fuel
during sub-chapter L operations only)

Ballast : 304,253.8 Gallons (1,151.73 m3)
Drill Water : 90,430.3 Gallons (343.32 m3)
Potable Water : 41,335 Gallons (156.5 m3)
Dry Bulk : 11,442.4 ft3 @ 80 psig (324.01 m3 @ 5.5bars)
Liquid Mud : 13,322 Barrels (2,118 m3)

Special Features
Tuggers : Two (2) x 12,000 Lbs. Line Pull, Tulsa Winch1241W-81157
Ship Motion : Two (2) x Passive Type Anti-Roll Tanks
Ship Motion : Bilge Keels
Positioning : DPS - 2
Deck Crane : One (1) x 3.0 LT SWL, 30ft Fixed Boom, (MCF-530 North Pacific Crane)
Firefighting : Two (2) x 5,283 GPM Fire Monitors, JasonEureka  (MM602HD-C-01)

Machinery
Main Engines :
Two (2) x C-280-8 Caterpillar (CAT) DieselEngines @ 3,299 HP Each

Bow Thrusters :
One (1) x Brunvoll FU80 1,050 KW @ 1,190RPM, 4-Blade FPP
Propeller @ 2,000mm Dia.

Stern Thrusters :
One (1) x Brunvoll FU80 1,050 KW @ 1,190RPM, 4-Blade FPP
Propeller @ 2,000mm Dia.

Swing Down Combination Thruster :
One (1) x 1,100 HP Rolls Royce TCNC 73/M-180, 4-Blade FPP
Propeller @ 1,800mm Dia.

Speed : 13 knots
Emergency Generators : One (1) x John Deere 175 kW, RadiatorCooled

Ships Service Generators :
Two (2) x C32 Caterpillar (CAT) DieselGenerators @ (910 KW) each.

Life Saving Equipment
Life Rafts : Four (4) x 25-Person Inflatable Life Rafts
Life Rafts : Two (2) x 10-Person Inflatable Life Rafts
Rescue Boat/Craft :
One (1) x Fast RSQ 450 A, 6 Person Cap.,40hp, 4.3m OAL,
USCG/SOLAS Appr. with Davit

Flow-Back Chemical
500bbl Approvals :
8 X 500bbl tanks (4,000 barrels) on vessel deck -
All (8) tanks are capable ofcarrying both hazardous and
pollutionmaterial. Flow-Back carriage requires USCG
approval of chemical prior to carriage.

Accomodations
29 Bunks - (8 x 2 Person, 3 x 4 Person, & 1 x1 Person)

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
280ft PSV for Sale
Platform Supply Vessel - 2009 Built - For Sale
OSV for Sale
PSV - 29 Bunks - For Sale
280FT Platform Supply Vessel - for Sale

-------------------------------------------------------------------------------------------------------
Available for selling

2009 Built Platform Supply Vessel - For Sale
Contact Us
ID 2796
Ingersoll Rand DM30 Drilling Rig for Sale
Worldoils Marketplace
Ingersoll Rand DM30 Drilling Rig for Sale

Worldrigs ID: WR2923

Ingersoll Rand DM30 Drilling Rig for Sale
Drilling Rig - Ingersoll Rand DM30  - For Sale


Model : : Ingersoll Rand DM30
Manufacturer : Ingersoll Rand
Year : Refurbished 2020
Condition : Used

Description :

Truck : Navistar international 7600.
Year of the truck : 2012.
Truck miles : 72.000 miles
Drilling Rig Hours reader : 7923 (5) x 1/10
Engine : Cummins KAT19 550 HP
Compressor : Simma Sullair mounted over truck 1050 CFM – 350 PSI.

Fully equipped Drilling Rig
The equipment is fully operating and under drilling contract right now
Aditionals included: FMC WaterPum, 2 heavy duty operational winch.
Additional not included: 120 meters of drilling rods 4 ½ api

Location : Santiago, Chile

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Ingersoll-Rand Drilling Rig for Sale
Ingersoll Rand DM30 Drilling Rig - 2020 Rebuilt
Used Ingersoll Rand DM30 Drilling Rig for Sale
Ingersoll-Rand Land Drilling Rig for Sale
DM30 Drilling Rig for Sale

-------------------------------------------------------------------------------------------------------
Available for selling

Ingersoll Rand DM30 Drilling Rig - For Sale
Contact Us
ID 2923
4500hp drawworks Available for selling

Drawworks For Offshore Drill Rigs or Drill Ships - New 4500hp for Sale
Contact Us
ID 120
280ft Offshore Supply Vessel
Worldoils Marketplace
280ft Offshore Supply Vessel

Worldrigs ID: WR2790

280ft Offshore Supply Vessel
2005 built PSV for Sale


Description :

General
Vessel Type : PSV - Platform Supply Vessel
Vessel Class : OSV - Offshore Supply Vessel
Year Built : 2005
Classification : ABS, USCG, SOLAS, MARPOL

Dimensions
Dimensions : 280 ft X 60 ft X 24 ft (85.34 m X 18.29 m X7.32 m)
Length Overall : 280 ft.
Draft (Lightship) : 7 ft. 3 in. (2.21 m)
Draft (Loadline) : 19.24 ft (5.87 m)
Clear Deck : 203 ft x 50.5 ft (61.89 m x 15.40 m)
Clear Deck : 10,251 sq. ft. (953 m2)
Deck Cargo Capacity : 2,700 LT (2,743.20 MT)
Deadweight Tonnage : 4,695.91 LT (4,771.27 MT)

Capacities
Fuel Oil : 288,732.20 gals. (1,092.97 m3)
Ballast : 303,141 gals. (1,147.51 m3)
Potable Water : 34,820 gals. (131.81 m3)
Dry Bulk : 11,440.10 cu. ft. @ 80 psi (324.2 m3 @ 5.5bars)
Liquid Mud : 15,413.80 barrels (2,450.60 m3)
Methanol : 1,843.66 barrels (293.12 m3)

Special Features

Tuggers : Two (2) x 4 Tons
Ship Motion : Two (2) Passive Type Anti-Roll Tanks
Ship Motion : Bilge Keels
Positioning : DP-2
Deck Crane : One (1) x 3,100 lb Capacity

Machinery
Main Engines : Two (2) CAT 3608 Diesels, 7,200 BHP
Bow Thrusters : One (1) 1,200 HP Rolls Royce Swing Up
Bow Thrusters : One (1) 1,700 HP Schottel
Stern Thrusters : One (1) 1,700 HP Schottel
Speed : 15 knots
Generators : Two (2) x 910 kW
Generators : One (1) x 170 kW emergency

Life Saving Equipment
Life Rafts : Two (4) x 25-Man Inflatable Life Rafts
Life Rafts : Two (1) x 10-Man Inflatable Life Rafts
Rescue Boat/Craft : One (1) x Sea Force 490 SOLAS Rescue Boat with davit
Other gear as required by authorities

Flow-Back Chemical
500bbl Approvals :
8 X 500bbl tanks (4,000 barrels) onvessel deck - All (8) tanks are
capable of carrying wither hazardous or pollution material.
Flow-Back carriage requires USCG approval of chemicals
prior to carriage.

Electronics
Electronics Package
JRC 75C Inmarsat-C, JRC JSB-196 GM SSB Radio Telephone,
JRC NCT-196N DSC/NBDP Modem, JRC NDZ-127C Data
Terminal, JRCJFE-585 Echo Sounder, JRC NWZ-4570 GPS
Navigator, JRC JLR-7700 MKII GPS Navigator, Mini Max CSI
Wireless DGPS,Furuno NX-300 Navtex, JRC NCR-330 Navtex
Receiver, Two (2) ICOM IC-M402 VHF Radios, Marine Technologies
Bridge Mate AIS Unit, Two (2) Furuno FM-8500 VHF Radio
Telephones, Havant Navitron Autopilot, Two(2) Young Wind
Trackers, Two (2) Meridian Gyro Compasses, Three (3) JRC
JHS-7 Handheld Emergency VHF, ACR RBL-32 406 EPIRB,
Two (2) JRC JQX-30A SART, Marine Technologies VSAT

Accommodations : 29

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
2005 built PSV for Sale
280FT OSV for Sale
Platform Supply Vessel for Sale
OSV - 2005 built - For Sale
PSV - 280ft - for Sale

-------------------------------------------------------------------------------------------------------
Available for selling

280ft Offshore Supply Vessel
Contact Us
ID 2790
280ft Platform Supply Vessel for sale
Worldoils Marketplace
280ft Platform Supply Vessel for sale

Worldrigs ID: WR2791

280ft Platform Supply Vessel for sale
2009 built OSV for Sale


Description :

General
Vessel Type : PSV - Platform Supply Vessel
Vessel Class : OSV - Offshore Supply Vessel
Year Built : 2009
Classification : ABS, USCG, SOLAS, MARPOL

Capacities
Fuel Oil (Ship/Cargo) :
375,993 Gallons (1,423.3m3)
(NOTE: Cargofuel during sub-chapter L operations)

Ballast : 310,257 Gallons (1,174.5 m3)
Drill Water : 90,430.4 Gallons (342.3 m3)
Potable Water : 41,335 Gallons (156.5 m3)
Dry Bulk : 12,000 ft3 @ 80 psig (339.8 m3 @ 5.5 bars)
Liquid Mud : 13,322 Barrels (2,118 m3)

Special Features
Tuggers : Two (2) x 12,000 Lbs. Line Pull, Tulsa Winch1241W-81157
Ship Motion : Two (2) x Passive Type Anti-Roll Tanks
Ship Motion : Bilge Keels
Positioning : DPS - 2

Deck Crane : One (1) x 3.0 LT SWL, 30ft Fixed Boom,
(MCF-530 North Pacific Crane)

Firefighting : Two (2) x 5,283 GPM (1,200 m3/hr)  Fire Monitors,
Jason Eureka  (MM602HD-C-01)

Firefighting : Two (2) x 7,705 GPM (1,750 m3/hr) @ 459TDH
(Fire Monitor Pumps), Jason EurekaOGF-250x350

Machinery
Main Engines : Two (2) x C-280-8 Caterpillar (CAT)
Diesel Engines @ 3,299 HP Each

Bow Thrusters : One (1) x Brunvoll FU80 1,050 KW @ 1,190RPM,
4-Blade FPP Propeller @ 2,000mm Dia.

Stern Thrusters : One (1) x Brunvoll FU80 1,050 KW @ 1,190RPM,
4-Blade FPP Propeller @ 2,000mm Dia.

Swing Down Combination Thruster : One (1) x 1,100 HP Rolls Royce
TCNC 73/M-180, 4-Blade FPP Propeller @ 1,800mm Dia.

Speed : 13 knots
Propellers : Two (2) x Schottel SCP 077-1 XG 2,700mm Diameter (CPP)
Emergency Generators : One (1) x John Deere 175 kW, Radiator Cooled

Ships Service Generators : Two (2) x C32 Caterpillar (CAT)
Diesel Generators @ (910 KW) each.

Shaft Generators : Two (2) x 2mW, 3PH, 0.8 Power Factor,
Kato 4P6.6-2975

Life Saving Equipment
Life Rafts : Four (4) x 25-Person Inflatable Life Rafts
Life Rafts : One (1) x 10-Person Inflatable Life Raft
Rescue Boat/Craft : One (1) x Fast RSQ 450 A, 6 Person Cap.,
40hp, 4.3m OAL, USCG/SOLAS Appr. with Davit

Flow-Back / Chemical
Flowback Approvals : 8 X 500bbl tanks (4,000 barrels) onvessel deck -
All (8) tanks are capable ofcarrying both hazardous and pollutionmaterial.
Flow-Back carriage requires USCG approval of chemical prior to carriage.
Flowback Approvals : Two (2) x On-Deck Flow-Back/Chemical Carriage
Tanks (7,100 Barrels Total Capacity Both Tanks)

Accommodations
Accommodations : 29 Bunks - (8 x 2 Person, 3 x 4 Person, & 1 x1 Person)

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
2009 built OSV for Sale
PSV - 280ft - For Sale
Offshore Supply Vessel for Sale
OSV - 29 bunks - For Sale
Platform Supply Vessel for Sale

-------------------------------------------------------------------------------------------------------
Available for selling

OSV - 29 bunks - For Sale
Contact Us
ID 2791
280ft Platform Supply Vessel for sale
Worldoils Marketplace
280ft Platform Supply Vessel for sale

Worldrigs ID: WR2792

280ft Platform Supply Vessel for Sale
PSV - Converted in 2019 - For Sale


Description :

General
Vessel Type : PSV - Platform Supply Vessel
Vessel Class : OSV - Offshore Supply Vessel
Year Built : 2008
Year Converted/Modified : 2019
Classification : ABS, USCG, SOLAS, MARPOL

Dimensions
Dimensions : 280 ft x 60 ft x 24 ft (85.34m x 18.29m x 7.32m)
Length Overall : 280 ft.
Draft (Lightship) : 7 ft. 3 in. (2.21 m)
Draft (Loadline) : 19.24 ft (5.87 m
Clear Deck : 225 ft x 50.5 ft (68.58 m x 15.40 m)
Cargo Deck Area : 11,363 sq. ft. (1,056 sq. m)
Deck Cargo Capacity : 2,700 LT (2,743.20 MT) @ 3ft VCG
Deadweight Tonnage : 4,748.2 LT (4,824.4 MT)

Capacities
Fuel Oil : 375,994.6 gals. (1,423.29 m3)
Ballast : 326,404 gals. (1,235.6 cu. m)
Potable Water : 34,820 gallons (158.0 cu. m)
Dry Bulk : 11,300 ft3 @ 80 psi (320 m3 @ 5.5 bars)
Liquid Mud : 13,460 barrels (2,026.4 cu. m)

Special Features
Tuggers : Two (2) x 12,000 lbs (6 Tons) each Line Pull
Ship Motion : Two (2) Passive Type Anti-Roll Tanks
Ship Motion : Bilge Keels
Positioning : DPS-2

Deck Crane : One (1) x 3.0 LT SWL, 30ft Fixed Boom,
(MCF-530 North Pacific Crane)

Machinery
Main Engines : Two (2) x Caterpillar C280-8 3,299 HP each Diesel Engines
Bow Thrusters : One (1) x Brunvoll FU-80 1,350 kw Electric Drive Tunnel Thruster
Stern Thrusters : One (1) x Brunvoll FU-80 1,350 kw Electric Drive Tunnel Thruster
Swing Down Combination Thruster : One (1) x Ulstein 1,100 HP Combination Thruster
Speed : 13 knots
Emergency Generators : One (1) x 175 kw Radiator Cooled
Ships Service Generators : Two (2) x CAT C32 910kw each

Life Saving Equipment
Life Rafts : Two (4) x 25-Man Inflatable Life Rafts
Life Rafts : Two (1) x 10-Man Inflatable Life Rafts
Rescue Boat/Craft : One (1) x Narwhal 6 Person Capacity

Other gear as required by authorities

Flow-Back / Chemical
500bbl Approvals :
10 x 500bbl Tanks (5,000 barrels) on vessel deck - (8 Tanks are capable of
carrying hazardous material (8x 500bbl =4,000 barrels), All 10 tanks are
capable of carrying pollution material, Flow-Back carriage requires
USCG approval of chemicals prior tocarriage)

Electronics
Electronics Package :
JRC 75C Inmarsat-C, JRC JSB-196 GM SSB Radio Telephone,
JRC NCT-196N DSC/NBDP Modem, JRC NDZ-127C Data Terminal,
JRCJFE-585 Echo Sounder, JRC NWZ-4570 GPS Navigator,
JRC JLR-7700 MKII GPS Navigator, Mini Max CSI Wireless DGPS,
JRCNCR-330 Navtex Receiver, Two (2) ICOM IC-M402 VHF Radios,
Marine Technologies Bridge Mate AIS Unit, Two (2) Furuno FM-8500 VHF
Radio Telephones, Havant Navitron Autopilot, Three (3) Young Wind Trackers,
Three (3) Meridian Gyro Compasses, Three (3) JRC JHS-7 Handheld
Emergency VHF,ACR RBL-32 406 EPIRB, Two (2) JRC JQX30A SART,
Marine Technologies Dynamic Positioning System, Marine
Technologies Radio Marine 90 cm VSAT

Accommodations : 29 Bunks

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
2008 Built Platform Supply Vessel
ABS Class PSV for Sale
2019 Modified Platform Supply Vessel for Sale
PSV - 2008 Built - For Sale
29 Bunks PSV for Sale
Offshore Supply Vessel for Sale
OSV - 280FT - For Sale

-------------------------------------------------------------------------------------------------------
Available for selling

2019 Modified 280FT Platform Supply Vessel for Sale
Contact Us
ID 2792
280ft OSV for Sale
Worldoils Marketplace
280ft OSV for Sale

Worldrigs ID: WR2793

280ft OSV for Sale
Offshore Supply Vessel for Sale

Description :

General
Vessel Type : PSV - Platform Supply Vessel
Vessel Class : OSV - Offshore Supply Vessel
Year Built : 2010
Classification : ABS, USCG, SOLAS, MARPOL

Dimensions
Dimensions : 280 ft x 60 ft x 24 ft (85.34m x 18.29m x7.32m)
Length Overall : 280 ft.
Draft (Lightship) : 7 ft. 3 in.  (2.21 m)
Draft (Loadline) : 19.44 ft (5.87m)
Clear Deck : 201 ft x 50.5 ft (61.27m x 15.40m)
Cargo Deck Area : 10,151 ft2. (943 m2)
Deck Cargo Capacity : 2,525 LT (2,565.5 MT) @ 3ft VCG Above Main Deck
Deadweight Tonnage : 4,750 LT (4,826 MT)

Capacities
Fuel Oil : (Ship/Cargo)375,993 Gallons (1,423.3 m3)
(NOTE: Cargo fuel during sub-chapter L operations)

Ballast : 310,257 Gallons (1,174.5 m3)
Drill Water : 90,430.4 Gallons (342.3 m3)
Potable Water : 41,335 Gallons (156.5 m3)
Dry Bulk : 12,000 ft3 @ 80 psig (339.8 m3 @ 5.5 bars)
Liquid Mud : 13,322 Barrels (2,118 m3)

Special Features
Tuggers : Two (2) x 12,000 Lbs. Line Pull, Tulsa Winch 1241W-81157
Ship Motion : Two (2) x Passive Type Anti-Roll Tanks
Ship Motion : Bilge Keels
Positioning : DPS - 2

Deck Crane : One (1) x 3.0 LT SWL, 30ft Fixed Boom,
(MCF-530 North Pacific Crane)

Firefighting : Two (2) x 5,283 GPM (1,200 m3/hr)  
Fire Monitors, Jason Eureka  (MM602HD-C-01)

Firefighting : Two (2) x 7,705 GPM (1,750 m3/hr) @ 459TDH
(Fire Monitor Pumps), Jason Eureka OGF-250x350

Machinery
Main Engines : Two (2) CAT C280-8 Diesels, 7,200 BHP
Bow Thrusters : One (1) 1,200 HP Rolls Royce Swing Up
Bow Thrusters : One (1) Brunvoll FU80 LTC 2000 (Electric Driven 1,250 kW)
Stern Thrusters : One (1) Brunvoll FU80 LTC 2000 (Electric Driven 1,250 kW)
Speed : 13 knots
Generators : Two (2) x 910 kW
Generators : One (1) x 175 kW Emergency

Life Saving Equipment
Life Rafts : Four (4) x 25-Man Inflatable Life Rafts
Life Rafts : Two (2) x 10-Man Inflatable Life Raft
Rescue Boat/Craft : One (1) x Fast RSQ 450A Rescue Boat with davit
Other gear as required by authorities

Flow-Back/Chemical
500bbl Approvals :
8 X 500bbl tanks (4,000 barrels) onvessel deck - All (8) tanks are capable of
carrying both hazardous and pollution material. Flow-Back carriage
requires USCG approval of chemical prior to carriage.

Electronics
Electronic Package :
Felcom 15 LRIT Inmarsat-C, JRC JSB-196GM SSB Radio Telephone,
JRC NCT-196NDSC/NBDP Modem, JRC NDZ-127C DataTerminal,
JRC JFE-585 Echo Sounder, JRCNWZ-4570 GPS Navigator,
JRC JLR-7700MKII GPS Navigator, Two (2) Mini Max CSI
Wireless DGPS, Furuno NX-300 Navtex, JRCNCR-330 Navtex
Receiver, Two (2) ICOM IC-M402 VHF Radios, Marine Technologies
Bridge Mate AIS Unit, Two (2) Furuno FM-8500 VHF Radio Telephones,
Havant Navitron Autopilot, Three (3) Young Wind Trackers,Three (3)
Meridian Gyro Compasses, Three(3) ICOM gM1600 Handheld
Emergency VHF,ACR RBL-32 406 EPIRB, Two (2) JRC JQX30A SART,
VSAT System, CyScan, RadaScan, Two (2) VRU, Marine Technologies
Dynamic Positioning System(DP 2)

Accommodation : 29

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Offshore Supply Vessel for Sale
2010 Built Offshore Supply Vessel - For Sale
OSV - 29 bunks - for Sale
PSV - 280ft - for Sale
2010 built Platform Supply Vessel for Sale

-------------------------------------------------------------------------------------------------------
Available for selling

2010 Built Offshore Supply Vessel - For Sale
Contact Us
ID 2793
Drilling Rig - Simco 2400 SK - For Sale
Worldoils Marketplace
Drilling Rig - Simco 2400 SK - For Sale

Worldrigs ID: WR1130

Simco 2400 SK-Drilling Rig for Sale
Drilling Rig - Simco 2400 SK - For Sale


Model : 2400 SK Drill Rig
Manufacturer : Simco
Condition : Used

Description :

Simco 2400 SK-Drill Rig
Torque 2400 ft/lbs
0 to 185 rmps
Can pull 7600 lbs & push 7600 lbs
1800 lbs winch lift
Net stroke 74'
Using conventional auger
rated to bore a 10" diameter hole 0-100ft deep
rated for a hollow auger can go up to 60ft  deep at 3 1/4" to 4 1/4" diameter
and 0-25ft  with a 6 1/4" diameter
rated core drill it can go 250ft  AWX and 150ft  NWX
The drill was mainly used for finding water main leaks,
and has received regular maintenance
Can be Mounted on a 1995 Ford F-450 Truck

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Simco 2400 SK Used Drilling Rig for Sale
Used Simco 2400 SK-Drilling Rig for Sale
Simco 2400 SK Land Drilling Rig for Sale
Simco Used Drilling Rig for Sale in USA
Simco 2400 SK Drilling Rig for Sale in USA

-------------------------------------------------------------------------------------------------------

Available for selling

Simco 2400 SK-Drilling Rig - For Sale
Contact Us
ID 1130
195 ft Long Work Barge for sale
Worldoils Marketplace
195 ft Long Work Barge for sale

Worldrigs ID: WR2786

195 ft Long Work Barge for Sale
Work Barge for Sale

Specifications
Dimensions
195ft x 40ft x 10ft

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
195 ft Long Work Barge for Sale
Work Barge for Sale
Used Work Barge - 195ft Long - For Sale
40ft Breadth Work Barge for Sale
Barge for Sale

-------------------------------------------------------------------------------------------------------

Available for selling

195ft Long Work Barge for sale
Contact Us
ID 2786
330 FT Platform Supply Vessel
Worldoils Marketplace
330 FT Platform Supply Vessel

Worldrigs ID: WR2787

330 FT Platform Supply Vessel
2013 Built Offshore Supply Vessel for Sale


Description :

General
Vessel Type : PSV - Platform Supply Vessel
Vessel Class : OSV - Offshore Supply Vessel
Year Built : 2013
Classification : ABS, USCG, SOLAS, MARPOL

Dimensions
Dimensions : 300 ft x 60 ft x 24 ft (91.4m X 18.30m X 7.3m)
Length Overall : 300 ft.
Draft (Lightship) : 7 ft. 3 in.  (2.21m)
Draft (Loadline) : 19.01 ft. (5.79m)
Clear Deck : 222 ft x 50.5 ft (67.67m x 15.40m)
Clear Deck Area : 11,211 ft2 (1,042 m2)
Deck Strength : 1,200 lb/ft2 (5,858 kg/m2)
Deck Cargo Capacity : 2,800 LT (2,845 MT)
Deadweight Tonnage : 4,856 LT (4,933 MT)

Capacities
Fuel Oil (Ship/Cargo) :
151,622 Gallons (573.95 m3) (NOTE: Cargofuel
during sub-chapter L operations)

Rigs Fuel Oil : 261,613 Gallons (990.31 m3)
Ballast/Rig Water : 264,172 Gallons (1,000 m3)
Rig Water : 60,528 Gallons (229.2 m3)
Potable Water : 34,826.1 Gallons (131.83 m3)
Dry Bulk : 12,000 ft3 @ 80 psig (339.8 m3 @ 5.5 bars)
Liquid Mud : 14,511.6 Barrels (2,307.16 m3)
Methanol : 1,766.1 Barrels (280.79 m3)

Fuel Consumption
Reduced Frequency Conversion :
Engines / Generators operating at reduced variable frequency
speeds to suit loads during DP operations, decreasing fuel
consumptionand reducing fuel emissions.

Special Features
Ship Motion : Two (2) x Passive Type Anti-Roll Tanks
Ship Motion : Bilge Keels
Positioning : DPS-2
Steering and Controls : Two (2) x High-Lift Type Rudders

Deck Crane :
One (1) x 3.0 LT SWL, 30ft Fixed Boom, (MCF-530 North Pacific Crane)

Firefighting :
Two (2) x 1,200 m3/hr (5,283 GPM) Monitors,with Water Spray System

Firefighting :
Two (2) x 7,705 GPM (1,750 m3/hr) @ 459TDH (Fire Monitor Pumps),
Jason Eureka OGF-250x350

Machinery
Main Engines :
Two (2) x C-280-8 Caterpillar (CAT) Diesel Engines @ 3,299 HP Each

Bow Thrusters :
Two (2) x Brunvoll FU80 Tunnels (1,050 kW),4-Blades FPP
Propeller @ 2,000mm Dia.,VFD Electric Drive

Stern Thrusters :
Two (2) x Brunvoll FU63 LTC 1550 Tunnels,800 kw (each),
4-Blade CPP Propeller @1,550mm Dia.

Speed13 knots

Emergency Generators :
One (1) x 175 kw John Deere 6081AFM75,Radiator Cooled

Ships Service GeneratorsTwo (2) x C32 Caterpillar (CAT)
Diesel Generators @ (910 KW) each.

Life Saving Equipment
Life Rafts : Four (4) x 25-Person Inflatable Life Rafts
Life Rafts :Two (2) x 10-Person Inflatable Life Rafts

Rescue Boat/Craft :
One (1) x Fast RSQ 450 A, 6 Person Cap.,40hp,
4.3m OAL, USCG/SOLAS Appr. with Davit

Flow-Back / Chemical
Flowback Approvals10 x 500bbl Tanks (5,000 barrels)
On vessels deck - (4 Tanks are capable of carrying hazardous
 material (4x500bbl =2,000 barrels), All 10 tanks are capable of
carrying pollution material, Flow-Back carriage requires USCG
approval of chemicals prior to carriage)

Accommodations
29 Bunks - (8 x 2 Person, 3 x 4 Person, & 1 x1 Person)

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
2013 Built PSV for Sale
OSV - 300 FT - For Sale
Platform Supply Vessel - 29 Bunks - For Sale
OSV - 2013 Built - for Sale
330 FT Platform Supply Vessel for Sale

-------------------------------------------------------------------------------------------------------
Available for selling

300 FT Platform Supply Vessel for Sale
Contact Us
ID 2787
280ft Platform Supply Vessel for Sale
Worldoils Marketplace
280ft Platform Supply Vessel for Sale

Worldrigs ID: WR2788

280ft Platform Supply Vessel for Sale
Used PSV for Sale


Description :

General
Vessel Type : PSV - Platform Supply Vessel
Vessel Class : OSV - Offshore Supply Vessel
Year Built : 2008
Classification : ABS, USCG, SOLAS, MARPOL

Dimensions
Dimensions : 280ft X 60ft X 24ft (85.34 m X 18.29 m X 7.32m)
Draft (Lightship) : 7 ft 3 in (2.21 m)
Draft (Loadline) : 19.24ft (5.87 m)
Clear Deck : 201ft x 50.5ft (61.27 m x 15.40 m)
Cargo Deck Area : 10,151 sq. ft. (943 m2)
Deck Cargo Capacity : 2,700 LT (2,743.20 MT)
Deadweight Tonnage : 4,720.57 LT (4,797.68 MT)

Capacities
Fuel Oil : 263,104 gals. (995.96 cu. m)
Ballast : 311,870 gals. (1,180.56 cu. m)
Drill Water : 105,414 gals. (399.04 cu. m)
Potable Water : 34,824 gallons (131.82 cu. m)
Dry Bulk : 11,442.4 cu. ft. @ 80 psi (324.01 m3 @ 5.5bars)
Liquid Mud : 13,332 barrels (2,119.6 cu. m)
Methanol : 1,534.6 barrels (243.98 m3)

Special Features
Tuggers : Two (2) x 4 Tons
Ship Motion : Two (2) Passive Type Anti-Roll Tanks,
Ship Motion : Bilge Keels
Positioning : DP-2
Deck Crane : One (1) x 3,100 lb Capacity
Firefighting : Two (2) x 8,000 GPM Fire Monitors

Machinery
Main Engines : Two (2) CAT C280-8 Diesels, 7,200 BHP
Bow Thrusters : Two (2) Brunvoll FU80 LTC 2000 (Electric Driven 1,250 kW)
Stern Thrusters : One (1) Brunvoll FU80 LTC 2000
Speed : 13 knots
Generators : Two (2) x 910 kW One (1) x 166 kW emergency

Life Saving Equipment
Life Rafts : Four (4) x 25-Man Inflatable Life Rafts
Life Rafts : One (1) x 10-Man Inflatable Life Rafts
Rescue Boat/Craft : One (1) x RSQ 450A SOLAS Rescue Boat with davit

Other gear as required by authorities

Flow-Back / Chemical
500bbl Approvals :
8 X 500bbl tanks (4,000 Barrels) Onvessel Deck - All (8) tanks are capable of
carrying both hazardous and pollution material. Flow-Back carriage requires
USCG approval of chemical prior to carriage.

Electronics
Electronics Package :
JRC 75C Inmarsat-C, JRC JSB-196 GM SSB Radio Telephone,
JRC NCT-196N DSC/NBDP Modem, JRC NDZ-127C
Data Terminal, JRCJFE-585 Echo Sounder,
Two (2) C-Nav 3050DGPS, Mini Max CSI Wireless DGPS,
Furuno NCR333 Navtex, JRC NCR-330 Navtex Receiver,
Two (2) ICOM IC-M402 VHF Radios, Marine Technologies
Bridge Mate AIS Unit, Two (2) Furuno FM-8500 VHF Radio
Telephones, Havant Navitron Autopilot, Three(3) Young Wind
Trackers, Three (3) Meridian Gyro Compasses, Three (3)
JRC JHS-7 Handheld Emergency VHF, ACR RBL-32 406EPIRB,
Two (2) JRC JQX 30A SART, MarineTechnologies Dynamic
Positioning System (DP 2)

Accommodations : 29

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
29 Bunks PSV for sale
OSV - 280FT - For Sale
2008 built Platform Supply Vessel for sale
Offshore Supply Vessel for Sale
OSV for Sale

PSV - 2008 Built - For Sale
ABS Class PSV for Sale

-------------------------------------------------------------------------------------------------------
Available for selling

2008 built Platform Supply Vessel for sale
Contact Us
ID 2788
280ft Platform Supply Vessel for Sale
Worldoils Marketplace
280ft Platform Supply Vessel for Sale

Worldrigs ID: WR2789

280ft Platform Supply Vessel for Sale
Used PSV for Sale


Description :

General
Vessel Type : PSV - Platform Supply Vessel
Vessel Class : OSV - Offshore Supply Vessel
Year Built : 2009
Classification : ABS, USCG, SOLAS, MARPOL

Dimensions
Dimensions : 280 ft x 60 ft x 24 ft (85.34m x 18.29m x7.32m)
Length Overall : 280 ft.Draft (Lightship)7 ft. 3 in.  (2.21 m)
Draft (Loadline) : 19.44 ft (5.87m)
Clear Deck : 201 ft x 50.5 ft (61.27m x 15.40m)
Cargo Deck Area : 10,151 ft2. (943 m2)
Deck Strength : 1,200 lb/ft2 (5,858 kg/m2)
Deck Cargo Capacity : 2,600 LT (2,641.7 MT) @ 3ft VGD Above MainDeck
Deadweight Tonnage : 4,734.69 LT (4,812.03 MT)

Capacities
Fuel Oil (Ship/Cargo) :
375,994.6 Gallons (1,423.29 m3)
(NOTE:Cargo fuel during sub-chapter L operations only)

Ballast : 304,253.8 Gallons (1,151.73 m3)
Drill Water : 90,430.3 Gallons (342.32 m3)
Potable Water : 41,335 Gallons (156.5 m3)
Dry Bulk : 11,442.4 ft3 @ 80 psig (324.01 m3 @ 5.5bars)
Liquid Mud : 13,322 Barrels (2,118 m3)

Special Features
Tuggers : Two (2) x 12,000 Lbs. Line Pull, Tulsa Winch1241W-81157
Ship Motion : Two (2) x Passive Type Anti-Roll Tanks
Ship Motion : Bilge Keels
Positioning : DPS - 2
Steering and Controls : Two (2) x High-Lift Type Rudders

Deck Crane :
One (1) x 3.0 LT SWL, 30ft Fixed Boom,
(MCF-530 North Pacific Crane)

Firefighting :
Two (2) x 5,283 GPM (1,200 m3/hr)  FireMonitors,
Jason Eureka (MM602HD-C-01)

Firefighting :
Two (2) x 7,705 GPM (1,750 m3/hr) @ 459TDH
(Fire Monitor Pumps), Jason Eureka OGF-250x350

Machinery
Main Engines : Two (2) x C-280-8 Caterpillar (CAT) Diesel
Engines @ 3,299 HP Each

Bow Thrusters :
One (1) x 1,350 kw, Ulstein TT2200-DPN-CPTunnel Thruster,
4-Blade CPP Propeller @2,200mm Dia., Electric Drive

Stern Thrusters :
One (1) x 1,350 kw, Ulstein TT2200-DPN-CP Tunnel Thruster,
4-Blade CPP Propeller @2,200mm Dia., Electric Drive

Swing Down Combination Thruster : One (1) x 1,100 HP Rolls
Royce TCNC 73/M-180, 4-Blade FPP Propeller @ 1,800mm Dia.

Speed : 13 knots

Emergency Generators : One (1) x John Deere 175 kW, RadiatorCooled

Ships Service Generators : Two (2) x C32 Caterpillar (CAT) Diesel
Generators @ (910 KW) each

Life Saving Equipment
Life Rafts : Four (4) x 25-Person Inflatable Life Rafts
Life Rafts : Two (2) x 10 Person Inflatable Life Rafts

Rescue Boat/Craft : One (1) x Fast RSQ 450 A, 6 Person Cap.,
40hp, 4.3m OAL, USCG/SOLAS Appr. with Davit

Flow-Back/Chemical
500bbl Approvals :
6 x 500bbl tanks (3,000 barrels) on vessel deck - (4) Tanks are
capable of carrying hazardous material (4 x 500bbls =2,000 barrels),
All (6) tanks are capable of carrying pollution material. Flow back
carriage requires USCG approval of chemicals prior to carriage.

Accommodations
29 Bunks - (8 x 2 Person, 3 x 4 Person, & 1 x1 Person)

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
2009 built Platform Supply Vessel
Offshore Supply Vessel for Sale
OSV - 280FT - For Sale
ABS Class PSV for Sale
OSV for Sale
PSV - 2009 Built - For Sale
29 Bunks PSV for Sale
------------------------------------------------------------------------------------------------------
Available for selling

2009 built Platform Supply Vessel for sale
Contact Us
ID 2789
280ft Offshore Supply Vessel for sale
Worldoils Marketplace
280ft Offshore Supply Vessel for sale

Worldrigs ID: WR2784

280ft Offshore Supply Vessel for sale
Used OSV for sale

Description :

General
Vessel Type : Offshore Supply Vessel
Year Built : 2007
Classification : ABS, USCG, SOLAS, MARPOL

Dimensions
Dimensions : 280 ft X 60 ft X 24 ft. (85.34 m X 18.29 m X7.32 m)
Draft (Lightship) : 7 ft. 3 in. (2.21 m)
Draft (Loadline) : 19.24 ft. (5.87 m)
Clear Deck : 203 ft. x 50.5 ft. (61.89 m x 15.40 m)
Cargo Deck Area : 10,251 sq. ft. (953 sq. m)
Deck Cargo Capacity : 2,700 LT (2,743.20 MT)
Deadweight Tonnage : 4,870.12 LT (4,948.04 MT)

Capacities
Fuel Oil : 348,617 gals. (1,319.66 cu. m)
Ballast : 374,186 gals. (1,416.45 cu. m)
Potable Water : 34,816 gals. (131.79 cu. m)
Dry Bulk : 11,455 cu. ft. @ 80 psi (324.37 cu. m @ 5.5bars)
Liquid Mud : 15,441.2 barrels (2,454.95 cu. m)

Machinery

Main Engines : Two (2) CAT C280-8 Diesels, 7,200 BHP
Main Propulsion : Two (2) Schottel CP Wheels
Bow Thrusters : One (1) 1,150 HP Rolls Royce Swing Up
Bow Thrusters : One (1) Brunvoll FU80 LTC 2000
Stern Thrusters : One (1) Brunvoll FU80 LTC 2000
Speed : 13 knots
Generators : Two (2) x 910 kW
Generators : One (1) x 175 kW emergency

Special Features
Tuggers : Two (2) x 4 Tons
Ship Motion : Two (2) Passive Type Anti-Roll Tanks
Ship Motion : Bilge Keels
Positioning : DP 2
Deck Crane : One (1) x 3,100 lbs. capacity

Life Saving Equipment
Life Rafts : Four (4) x 25-Man Inflatable Life Rafts
Life Rafts : One (1) x 10-Man Inflatable Life Raft
Rescue Boat/Craft : One (1) x Narwhal SV 400 SOLAS Rescue Boat with davit

Other gear as required by authorities

MSRC Equipment

Weedo 910 Tug and Macgregor Davit System,Sea Sentry Oil Boom Hydraulic
Reel, Rutter Sigma S6 Spill Detection and (not on boardbut equipped for)
Lamor Offshore Skimmer Unit LOS 350/140

Electronics
JRC JUE-85 Inmarsat-C, JRC JSB-196 GM
SSB Radio Telephone, JRC NCT-196NDSC/NBDP Modem,
JRC NDZ-127J Data Terminal, JRC JFE-585 Echo Sounder,
JRCNWZ-4570 GPS Navigator, JRC JLR-7700MKII GPS Navigator,
C-Nav1000 R4 Navigation System, JRC NCR-333 Navtex Receiver,
Two (2) ICOM IC-M422 VHF Radios, ACR Navicast AIS Unit,
Two (2) Furuno FM-8800D/8800S VHF Radio Telephones,
Havant Navitron NT88G Autopilot, Three (3) Young Wind
Trackers,Three (3) Bridge Mate Meridian Gyro Compasses,
Three (3) ICOM Handheld Emergency VHF, ACR RBL-32 406
EPIRB,Two (2) ACR SART, JRC JLN 205 Doppler Log,
Two (2) JRC Radars, Two (2) DGPS,VSAT System, CyScan,
Two (2) MRU, Marine Technologies Dynamic Positioning System,
Two (2) JMX-444D VHF Radios, Two (2) Icom IC-M72 Handheld
VHF Radios, Motorola XPR4550 Radio, Two (2) Ventis MX4
Multi-gasDetector

Accommodations : 29

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
280ft Offshore Supply Vessel for sale
Used OSV for sale
2007 built Offshore Supply Vessel
OSV - 280FT - For Sale
ABS Class OSV for Sale

----------------------------------------------------------------------------------------------------------
Available for selling

280ft Offshore Supply Vessel for Sale
Contact Us
ID 2784
300FT Platform Supply Vessel for Sale
Worldoils Marketplace
300FT Platform Supply Vessel for Sale

Worldrigs ID: WR2785

300FT Platform Supply Vessel for Sale
Offshore Supply Vessel - 2003 Built - For Sale


Description :

General
Vessel Type : PSV - Platform Supply Vessel
Vessel Class : OSV - Offshore Supply Vessel
Year Built : 2003
Classification : ABS, SOLAS, MARPOL

Dimensions
Dimensions : 300 ft. X 60 ft. X 24 ft. (91.44 m X 18.29 m X7.32 m)
Length Overall : 300 ft.Draft (Lightship)7 ft. 6 in. (2.29 m)
Draft (Loadline) : 19 ft. 6 in. (5.87 m)
Clear Deck : 223 ft. x 50 ft. 7 in. (67.97 m x 15.42 m)
Cargo Deck Area : 11,280 sq. ft. (1,047.95 sq. m)
Deck Strength : 1,200 lb/sq. ft. (5,615.88 kg/sq. m)
Deadweight Tonnage : 5,004.71 LT (5,084.79 MT)

Capacities
Fuel Oil : 272,983 gals. (1033.35 cu. m)
Ballast : 321,265.2 gals. (1216.12 cu. m)
Potable Water : 32,998 gals. (124.9 cu. m)
Dry Bulk : 11,440 cu. ft. @ 80 psi (323.94 cu. m @ 5.5 bars)
Liquid Mud : 15,643.6 Barrels (2,487 m3)
Recovered Oil : 12,349.2 Barrels (1,963.4 m3) (Note: Carriedin Liquid Mud Tanks)
Service Tanks : Eleven (11) x 13,481.4 gallons (51.03 cu. m)
Methanol : 1,836.2 barrels (292 cu.m)

Special Features
Ship Motion : Two (2) Passive Type Anti-Roll Tanks
Ship Motion : Bilge Keels
Positioning : DP 2
Deck Crane : One (1) x 3,100 lbs. capacity

Machinery
Main Engines : Two (2) 3608 CAT Diesels, 6,600 BHP
Bow Thrusters : One (1) 1,100 HP Swing Up
Bow Thrusters : One (1) 1,300 HP Tunnel
Stern Thrusters : One (1) 1,300 HP Tunnel
Speed : 12 knots
Generators : Two (2) x 910 kW, One (1) x 190 kW emergency

Life Saving Equipment
Life Rafts : Two (2) x 25-Man Inflatable Life Rafts
Life Rafts : Two (2) x 10-Man Inflatable Life Rafts
Life Rafts : Two (2) x 20-Man Inflatable Life Rafts
Rescue Boat/Craft : One (1) x Sea Force 490 SOLAS O/B Rescue Boat
Other gear as required by authorities

Flow-Back / Chemical
500bbl Approvals :
8 x 500bbl tanks (4,000 barrels) on vessel deck - (4) tanks are capable of
carrying hazardous material (4x500bbl =2,000 barrels), All (8) tanks are
capable of carrying pollution material. Flow-Back carriage requires USCG
approvals of chemicals prior to carriage.

Accommodation : 29

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
300FT Platform Supply Vessel for Sale
Offshore Supply Vessel - 2003 Built - For Sale
2003 Built PSV for Sale
OSV - 300FT - For Sale
Platform Supply Vessel for Sale
Offshore Supply Vessel - 300ft - for sale
-------------------------------------------------------------------------------------------------------
Available for selling

Platform Supply Vessel for Sale
Contact Us
ID 2785
Davey Rouselle M8A Drilling  Rig for Sale
Worldoils Marketplace
Davey Rouselle M8A Drilling  Rig for Sale

Worldrigs ID: WR2781

Davey Rouselle M8A Drilling  Rig for Sale
Drilling  Rig - Davey Rouselle M8A - For Sale


Model : Rouselle M8A Drill Rig
Manufacturer : Davey
Condition : Used

Description :

Davey Rouselle M8A Drill Rig
Mounted on a 1991 Sterling truck
CAT 3306 Diesel Engine
8 speed transmission
Davey 500 cfm / 125 psi piston compressor (also plumbed for auxiliary air)
Included with 100 ft of Davey rods and a changeover sub to 3.5" API threads for bit

Note: Since 2018 the drill has had the air compressor "gone through", has had
the table replaced, Ramsey pulldown winch replaced, chain cases replaced,
table transmission rebuilt, new radiator for deck engine, and various other
small repairs done
Drill motor is getting weak and will need rebuilt and can be done here if needed
and the price would reflect that
Truck Runs fine but 4th gear does jump out

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Used Davey Rouselle M8A Drilling  Rig for Sale
Davey Rouselle  Drilling  Rig for Sale
Davey Land Drilling  Rig for Sale
Davey Rouselle M8A Drilling  Rig for Sale in USA
Davey Rouselle M8A Used Drilling  Rig for Sale

-------------------------------------------------------------------------------------------------------
Available for selling

Davey Rouselle M8A Drilling Rig - For Sale
Contact Us
ID 2781
Platform Supply Vessel - 2007 Built - For Sale
Worldoils Marketplace
Platform Supply Vessel - 2007 Built - For Sale

Worldrigs ID: WR2782

280ft Offshore Supply Vessel for Sale
Platform Supply Vessel - 2007 Built - For Sale


Description :

General
Vessel Type : PSV - Platform Supply Vessel
Vessel Class : OSV - Offshore Supply Vessel
Year Built : 2007
Year Converted/Modified : 2016
Classification : ABS, USCG, SOLAS, MARPOL

Dimensions
Dimensions : 280 ft X 60 ft X 24 ft (85.34 m X 18.29 m X7.32 m)
Length Overall : 280 ft.Draft (Lightship)7 ft. 3 in. (2.21 m)
Draft (Loadline) : 19.24 ft (5.87 m)
Clear Deck : 201 ft x 50.5 ft (61.27 m x 15.40 m)
Cargo Deck Area : 10,151 sq. ft. (943 sq. m)
Deck Cargo Capacity : 2,700 LT (2,743.20 MT)
Deadweight Tonnage : 4,695.91 LT (4,771.27 MT)

Capacities
Fuel Oil : 334,527 gals. (1,266.3 cu. m)
Ballast : 246,549 gals. (933.3 cu. m)
Potable Water : 32,820 gals. (131.8 cu. m)
Dry Bulk : 12,000 cu. ft. @ 80 psi (339.8 cu. m @ 5.5bars)
Liquid Mud : 15,390.1 barrels (2,446.8 cu. m)
Methanol : 781.7 barrels (124.3 cu. m)

Special Features
Tuggers : Two (2) x 4 Tons
Ship Motion : Two (2) Passive Type Anti-Roll Tanks
Ship Motion : Bilge Keels
Positioning : DP 2
Deck Crane : One (1) x 3,100 lbs. capacity
Firefighting : Two (2) x 5,283 GPM Fire Monitors

Machinery
Main Engines : Two (2) CAT C280-8 Diesels, 6,598 BHP
Bow Thrusters : One (1) 1,200 HP Rolls Royce Swing Up
Bow Thrusters : One (1) Brunvoll FU80 LTC 2000
Stern Thrusters : One (1) Brunvoll FU80 LTC 2000
Speed : 13 knots
Generators : Two (2) x 910 kW
Generators : One (1) x 215 kW emergency

Life Saving Equipment
Life Rafts : Four (4) x 25-Man Inflatable Life Rafts
Life Rafts : Two (2) x 10-Man Inflatable Life Raft
Rescue Boat/Craft : One (1) x Narwhal SV 400 SOLAS RescueBoat with davit
Other gear as required by authorities

Flow-Back / Chemical

500bbl Approvals :
8 X 500bbl tanks (4,000 barrels) onvessel deck - All (8) tanks are capable of
carrying both hazardous and pollution material. Flow-Back carriage requires
USCG approval of chemical prior to carriage.

Electronics
Electronics Package :
JRC JUE-85 Inmarsat-C, JRC JSB-196 GMSSB Radio Telephone,
JRC NCT-196NDSC/NBDP Modem, JRC NDZ-127J DataTerminal,
JRC JFE-585 Echo Sounder, JRCNWZ-4570 GPS Navigator,
JRC JLR-7700MKII GPS Navigator, Furuno NX-300 Navtex,
JRC NCR-333 Navtex Receiver, Two (2) ICOM IC-M422,
ACR Navicast AIS Unit, Two (2) Furuno FM-8800D/8800S
VHF Radio Telephones, Havant Navitron NT88G Autopilot,
Three (3) Young Wind Trackers,Three (3) Meridian Gyro
Compasses, Three (3) ICOM Handheld Emergency VHF,
ACRRBL-32 406 EPIRB, Two (2) ACR SART, JRC Doppler Log,
Two (2) JRC Radars, Two (2) DGPS, VSAT System, CyScan,
Two (2) MRU, Marine Technologies Dynamic Positioning System

Accommodations
Accommodations : 29

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Offshore Supply Vessel for Sale
OSV for Sale
PSV - 280ft - for Sale
Offshore Supply Vessel - 2007 Built - for Sale
280ft Platform Supply Vessel for Sale
---------------------------------------------------------------------------------------------------------
Available for selling

Platform Supply Vessel - 2007 Built - For Sale
Contact Us
ID 2782
PSV for Sale
Worldoils Marketplace
PSV for Sale

Worldrigs ID: WR2783

302FT Offshore Supply Vessel for Sale
PSV for Sale


Description :

General
Vessel Type : PSV - Platform Supply Vessel
Vessel Class : OSV - Offshore Supply Vessel
Year Built : 2007
Year Converted/Modified : 2016
Classification : ABS, USCG, SOLAS, MARPOL

Capacities
Fuel Oil : 377,301 gals. (1,428.2 cu. m)
Ballast : 326,404  gals. (1,236 cu. m)
Potable Water : 34,701 gals. (131.4 cu. m)
Dry Bulk : 12,000 cu. ft. @ 80 psi (339.8 cu. m @ 5.5bars)
Liquid Mud : 15,403.2 barrels (2,449 cu. m)

Fuel Consumption
Reduced Frequency Conversion :
Variable Frequency Modifications forImproved Fuel Consumption

Reduced Frequency Conversion :
Engines / Generators operating at reduced variable frequency
speeds to suit loads during DP operations, decreasing fuel
consumption and reducing fuel emissions.

Special Features
Ship Motion : Two (2) Passive Type Anti-Roll Tanks
Ship Motion : Bilge Keels
Positioning : DP 2
Deck Crane : One (1) x 3.0 LT SWL, 30ft Fixed Boom, (MCF-530 North Pacific Crane)
ROV : One (1) STBD. Side Launch ROV System (C-Innovations)

Machinery
Main EnginesT : wo (2) Caterpillar  C280-8 Diesel Engines
Propulsion : Two (2) Schottel Controlled Pitch Propeller(CPP) Wheels
Bow Thrusters : One (1) x Brunvoll FU80 LTC 2000 Electric Driven
Stern Thrusters : One (1)  x Brunvoll FU80 LTC 2000 Electric Driven
Swing Down Combination Thruster : One (1) x Ulstein TCNC 73/M-180 1,100 BHP Thruster
Speed : 12.5 knots @ 11.5 ft. Draft
Emergency Generators : One (1) x John Deere 175kw Generator
Ships Service Generators : Two (2) x Caterpillar 3508B Diesel Generators 910 kw ea.

Life Saving Equipment
Life Rafts : Four (4) x 25-Man Inflatable Life Rafts
Life Rafts : One (1) x 10-Man Inflatable Life Raft
Rescue Boat/Craft : One (1) x Fast Rescue 450A Rescue Boatwith Davit

Other gear as required by authorities

Flow-Back / Chemical
500bbl Approvals :
8 X 500bbl tanks (4,000 barrels) onvessel deck - All (8) tanks are capable of
carrying both hazardous and pollution material. Flow-Back carriage requires
USCG approval of chemical prior to carriage.

Accommodations
Accommodations : 29 Bunks (9-Crew + 20 Offshore Workers)

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
302FT Offshore Supply Vessel for Sale
PSV for Sale
2007 Built Platform Supply Vessel for Sale
OSV - 302ft - For Sale
2016 Modified PSV for Sale
29 Bunks Offsore Supply Vessel for Sale
---------------------------------------------------------------------------------------------------------------
Available for selling

302FT Offshore Supply Vessel for Sale
Contact Us
ID 2783
New UMD 135 Land Drilling Rig - For Sale
Worldoils Marketplace
New UMD 135 Land Drilling Rig - For Sale

Worldrigs ID: WR595

UMD 135 Land Drilling Rig - For Sale in Europe
New Semi Mobile Drilling Rig For Sale - UMD 135


Main Technical Specifications
Engine type : C 15 ACERT
Nominal engine power hp (kW) : 475 (354)
Transmission : Allison 4700 OFS
Nominal hoisting capacity metric ton (lbs) : 135 (297000)
Workover depht (m) drill pipe (2 7/8”) : 5800
Drilling depht (m) (4 1/2“) : 2500
Rope diameter (mm) : 26
Mast height (m) : 32
Drilling floor height (m) : 5
Travelling system : 5x4
Working pressure (mpa) : 0, 65-0, 8

Technical Specifications
Engine type : C 15 ACERT
Nominal engine power hp (kW) : 475 (354)
Transmission : Allison 4700 OFS
Nominal hoisting capacity metric ton (lbs) : 135 (297000)
Workover depht (m) drill pipe (2 7/8”) : 5800
Drilling depht (m) (4 1/2“) : 2500
Rope diameter (mm) : 26
Mast height (m) : 32
Drilling floor height (m) : 5
Travelling system : 5x4
Working pressure (mpa) : 0, 65-0, 8

Drawworks
Main Drum -
Input power (hp) : 500
Barrel size : D18” W38”
Brake rim size : D44” W12”
Wire line size : 1 ” (26 mm)
Drum speed : 7F/1R
Brake cooling : Water circulation
Brake system : Band / disc / auxiliary (Parmac SSR-28 hydro-brake)
Lubrication : Automatic or manual
Drum clutch : Air flex type
Chain drives :
All chains are fully encloded for oil bath lubrication ensuring longer life
and cleaner operation

Sand Line Drum -
Barrel size : D13” W37“
Brake rim size : D44” W9½”
Spooling capacity : 16114’
Sand line wire size : 9/16” (14 mm) - 5/8” (16 mm)

Rig Power & Transmission

Diesel engine(s) : Caterpillar C-15 ACERT, 540Hp, 2.100rpm
Transmission(s) : ALLISON OFS 4700 series with torque converter
Right angle gear box : Min 500 hp gear box in oil bath gear case
Compound box :
Twin engine drive through transmission includes disconnect clutches at
compound shaft for engines

Mast & Crown Block
Mast -
Mast complete set : Design and conform to APİ 4F specification
Mast height : 32m ( 105ft )
Max. static hook load capacity : 1.323kN ( 300.000lbs )
Racking capacity : 2.500m ( 4 ½’’ DP 19.2m double )
Height of the monkey board : 17.2m ( from floor )
Mast type : Hydraulic telescopic
Accessories : Two (2) X hydraulic catheads, Two (2) X tong weight boxes,
standpipe, exproof lightning....etc

Crown Block -
Crown block complete set : Design and conform to APİ 4F specification
Max. hook load : 1.323kN (300.000lbs)
Number of sheaves : (3) Main + (1) fast line + (1) deadline + (1) sandline
+ (2) sheaves for service winch

Sheaves OD :
Fast Lines Ø32" ( Ø813mm )
Dead Line Ø28" ( Ø711mm )
Sand Line Ø28" ( Ø711mm )

Dia. of sheave’s grove :
Fast & Dead Lines Ø1" ( Ø26mm )
Sand & Winch Lines Ø 5/8" ( Ø16mm )

Substructure
Substructure complete set : Design and conform to APİ 4F specification
Height of substructure substructure : 5m
Area of substructure : 40m2
Max. static rotary load : 1.400kN
Set back capacity : 700kN
BOP lifting tools : 3tons capacity electric or mechanic winches
Accessories : Mouse, rat hole, dog house

Rotary Table
Diameter of opening : 20½"
Center of table to centerline of sprocket teeth : 44"
Maximum static load, ton : 350
Max speed, rpm : 300
Gear ratio : 3.79
Dimensions (LxWxH), in : 78×56×24
Approximate Weight, lbs : 12,020

Traveling Block & Hook
Traveling block : 1.400kN max. statik load, 4 sheaves, Ø32’’ sheaves dia.
Ø1’’ (Ø26mm ) groove dia.

Hook : 1.400kN max. statik load, 5tons spring stroke.
Elevator link(s) : 1.400kN rated load capacity.

Swivel
Static hook load, ton : 135
Working pressure, psi : 5,000
Maximum speed, rpm : 300
Coupling thread to stem : 4-1/2" Reg LH
Coupling thread to kelly : 6-5/8" Reg LH
Stem İ.D. : 2- 1/2"

Trailer & Other Systems
Trailer :
Three axles semi mobile trailer, 16 wheels, fabricated high tensile steel vehicle
frame reinforced at points of greatest stress. Highway equipment and cab included.
Installed fuel tank. Tool box. Auxilary drill line drum, all axles dressed brake, folding
walkwayss on both sides of trailer.

Hydraulic jacks : Four hydraulic operated leveling jacks
Hydraulic service winch : 5 metric tons drum pull capacity
Deadline anchor : Deadline anchor attached directly to trailer frame
Air system : Compressor (engine drive), air tank, relief valves, air dryer,
gauges, all clutches

Hydraulic system :
Hydraulic pump, system operate hydraulic cylinders on mast, hydraulic jacks, hydraulic
pipe tong, and hyraulic winch. Control valves, hydraulic oil tank, filters, pipes, hydraulic
and air valve connections, fittings.

Electrical lighting system : All the electrical equipments on the mast, and substructure
are ex-proof type

Instrumentation : Driller control panel, weight indicator, gauges, air valves, cables,
hoses, fittings, transducers, paint

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

Land Rigs

-------------------------------------------------------------------
Search words(for official use only) :
UMD 135 Land Drilling Rig for Sale
UMD 135 Semi Mobile Drilling Rig For Sale
New Semi Mobile Drilling Rigs
New UMD 135 Drilling Rig For Sale in Europe
Land Drilling Rigs For Sale

 ------------------------------------------------------------------
Available for selling

UMD 135 New Land Drilling Rig - For Sale
Contact Us
ID 595
Taylor 500 Workover Rig for Sale
Worldoils Marketplace
Taylor 500 Workover Rig for Sale

Worldrigs ID: WR2922

Taylor 500 Well Service Rig for Sale
Taylor 500 Workover Rig for Sale


Specifications :

Manufacturer : Taylor
Model : 500 Workover Rigs
Condition    : Used
Derrick : 104ft
Hook Load : 240,000 LBS
Engine : Caterpillar C-15
Engine HP : 500

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


--------------------------------------------------------------------------------------------
Search words (for official use only) -
Used Workover Rig For Sale
Used Taylor 500 Well Service Rigs For Sale
Land Workover Rig for Sale
Taylor Well Service Rigs For Sale
Taylor Double Drum Workover Rig for Sale

-----------------------------------------------------------------------------------------
Available for selling

Taylor 500 Well Service Rigs - For Sale
Contact Us
ID 2922
Mobile B37X Crawler Drilling Rig for Sale
Worldoils Marketplace
Mobile B37X Crawler Drilling Rig for Sale

Worldrigs ID: WR2573

Mobile B37X Crawler Drilling Rig for Sale
Drilling Rig - Mobile B37X Crawler - For Sale


Model : B37X Drill Rig - Crawler
Manufacturer : Mobile
Year : 2017
Condition : Used

Description :

2017 Mobile B37X Crawler Drill Rig
600 Hours
8,000 ft/lb
1050 RPM
13 ft stroke
Auto hammer
308 Undercarriage
20,000 lb main winch
Bean 1122 pump
1,000 psi piping
Wireless
John Deere 140HP- tier 3
Angle Drill

Selling Fully Tooled :
44 lightly used 4 1/4 HS augers
820 ft NQ rods
20 ft Longyear barrel
10 ft HQ barrel
190 ft of AWJ rods

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Mobile B37X Crawler Drilling Rig - 2017 Built for Sale
2017 Built Mobile B37X Crawler Drilling Rig for Sale
Used Mobile B37X Crawler Drilling Rig for Sale
Mobile Crawler Drilling Rig for Sale
Mobile B37X Crawler Drilling Rig for Sale in USA

-------------------------------------------------------------------------------------------------------
Available for selling

Mobile B37X Crawler Drilling Rig - For Sale
Contact Us
ID 2573
UDR 1500 Range III Mobile Drilling Rig for Sale
Worldoils Marketplace
UDR 1500 Range III Mobile Drilling Rig for Sale

Worldrigs ID: WR2780

UDR 1500 Range III Mobile Drilling Rig for Sale
Used UDR 1500 Drilling Rig for Sale


Model : UDR 1500 Drill Rig - Range III
Manufacturer : Generic
Condition : Used

Description :

UDR 1500 Range III Mobile Drill Rig
Mounted on a 2004 International 5800i Tri-Axle Truck
Engine Hours : 11,804
75 ft - 90,000 lb static hook load capacity
hydraulic raise and lower mast
Rexroth 44,000 lb draw works
Top drive
GD mud pump
CAT C15 14.6L diesel engine
525 Adv horsepower
Engine brake
Eaton Fuller 18 speed manual transmission
352” wheel base
40,000 lb front axle
51,000 lb rears
Rig was almost completely overhauled . Hydraulics , hoses, box  etc.

Location : North America

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
UDR 1500 Drilling Rig for Sale
UDR 1500 Range III Used Mobile Drilling Rig for Sale
Generic Used Mobile Drilling Rig for Sale
Generic Drilling Rig for Sale
Generic UDR 1500 Range III Mobile Drilling Rig for Sale

-------------------------------------------------------------------------------------------------------
Available for selling

UDR 1500 Range III Mobile Drilling Rig - For Sale
Contact Us
ID 2780
Drilling Rig - Schramm RC685 - 2011 Built
Worldoils Marketplace
Drilling Rig - Schramm RC685 - 2011 Built

Worldrigs ID: WR994

Schramm RC685 Exploration Drilling Rig for Sale
Drilling Rig - Schramm RC685 - 2011 Built


Model : RC685 Exploration Drill Rig
Manufacturer : Schramm
Year : 2011
Condition : Used

Description :

2011 Schramm RC685 Exploration Drill Rig
MTU V2000 Diesel Deck Engine
Sullair 1350 cfm / 500 psi Air Compressor
Hours : 12,317
Miles : 7,129
Boart Longyear Rod Handler
Hydraulic Pumps
Collector Box & Cyclone
Drill Table Opening : 22 inch
Rod Spinner & hydraulic breakout wrenches
Rated Depth Capacity : 5-1/2" diameter hole to 2,300 feet deep
Rated Pullback : 94,000 lbs
CAT Walk
Hydraulic Leveling Jacks
Mounted on a 2012 International Truck
MaxxForce Diesel Engine
Misc Drill Tooling for an extra cost (in pictures) Stablizer,
Hole Opener, Collar, Land Plates

Note: Set up for RC (Reverse Circulation) minerial exploration & mining.
This is not a T685 model for water wells

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
2011 Built Schramm RC685 Exploration Drilling Rig for Sale
Used Schramm RC685 Exploration Drilling Rig for Sale
Schramm RC685 Exploration Drilling Rig - 2011 Built for Sale
Schramm Exploration Drilling Rig for Sale in USA
Schramm RC685 Used Exploration Drilling Rig for Sale in USA

-------------------------------------------------------------------------------------------------------
Available for selling

Schramm RC685 Exploration Drilling Rig - For Sale
Contact Us
ID 994
Portadrill 524-3A Drilling Rig for Sale
Worldoils Marketplace
Portadrill 524-3A Drilling Rig for Sale

Worldrigs ID: WR2779

Portadrill 524-3A Drilling Rig for Sale
Portadrill 524-3A Drilling Rig - 1978 Built - For Sale


Model : 524-3A Drill Rig
Manufacturer : PortaDrill
Year : 1978
Condition : Used

Description :

1978 Portadrill 524-3A Drill Rig
Gardner-Denver 5-1/2" Mud Pump
Leroi 256 S-2 250 PSI Air Compressor
Hydrostatic drawworks and rotary table
Pipe Slide
Injection pump
Hydraulic leveling jacks
Mounted on a 1999 Ford Louisville truck
Powered by Cummins Red Top N14 Diesel Engine - rated 500 HP
Tag axle

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Drilling Rig - Portadrill 524-3A - For Sale
1978 Built Portadrill 524-3A Drilling Rig for Sale
Portadrill Used Drilling Rig for Sale
Portadrill 524-3A Land Drilling Rig for Sale
Used Portadrill 524-3A Drilling Rig for Sale in USA

-------------------------------------------------------------------------------------------------------
Available for selling

Portadrill 524-3A Drilling Rig - For Sale
Contact Us
ID 2779
1,800BHP Towing/Supply Vessel
Worldoils Marketplace
1,800BHP Towing/Supply Vessel

Worldrigs ID: WR199

Towing/Supply Vessel for Sale - 1,800BHP 
1998 Built Towing Vessel for Sale

General Specifications

General Particulars :
Year Built : 1998
Class : BKI

Principal Particulars :
Length Overall : 23.04m
Breadth Overall : 8.00m
Depth Moulded : 3.16m
Designed Draft : 2.30m
GRT/NRT : 181 / 108 tons

Machinery :
Main Engine :
2 x CUMMINS KTA-38M
940 BHP each

Steering gear :
Electro-hydraulic steering gear of about 2.0m tons torque

Towing Winch :
Electric hydraulic single drum winch
50 tons breaking pull
1st layer 10 tons pull
Wire Length 350m, dia. 34mm

Propulsion : 
2 x REINTJES WAF 540 (Germany)
2 x Fixed Propeller inside stell nozzles
    
Generators     
2 x PERKINS Gensets T4236
45 kVA / 36kW / 380V / 50Hz / 3Ph

Propellers : 2 X 4 Blade Manganese Bronze Propeller c/w Kort Nozzles

Anchors : Dia. 17.5mm with 2 x 350kg anchors

Performance & Consumption :
Bollard Pull  : 22 Tons
Maximum Speed : 12 knots
Economical Speed : 7 knots
Fuel Consumption : 6 Tons/day
Endurance : 15 days
Clear Deck Space : 16 m2
Deck Strength : 5 Tons/m2

Cargo Capacity 
Fuel Oil : 75 Tons
Fresh Water : 22 Tons

Navigation Equipment
GMDSS (A1 + A2 + A3) : 1 x FURUNO RC-1500-IT
Satellite EPIRB : 1 x MCMURDO MCM-406A
Navtex Receiver : 1 x FURUNO/JRC
Radar : 1 x FURUNO/JRC
Echo Sounder : 1 x FURUNO/JRC
GPS Plotter : 1 x FURUNO/JRC
Gyrocompass : 1 x ANSCHUETZ
Autopilot : 1 x ANSCHUETZ
Magnetic Compass : 1 x SAURA or equivalent
2 Way Portable VHF Radio 3 x FURUNO/JRC

Deck Equipment :
Anchor Windlass :  Miyako Seisakusho GM - LJ

Safety Equipment :
SOLAS compliant

Search words :
Towing/Supply Vessel For Sale
1800bhp Towing Vessel for Sale 
1998 Built Towing/Supply Vessel
Towing Tug in Malaysia
Towing Tug in Singapore
Towing Tug in India
Supply Vessel for India

--------------------------------------------------------------------------------

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------

Available for selling

Towing/Supply Vessel - 1,800BHP - for sale
Contact Us
ID 199
Used Gardner Denver 14W Drilling Rig - For Sale
Worldoils Marketplace
Used Gardner Denver 14W Drilling Rig - For Sale

Worldrigs ID: WR2741

Gardner Denver 14W Drilling Rig for Sale
Used Gardner Denver 14W Drilling Rig - For Sale


Model : 14W Drill Rig
Manufacturer : Gardner Denver
Year : 1973
Condition : Used

Description :

1973 Gardner Denver 14W Drill Rig
Mounted on a CCC (Crane Carrier Company) Truck
390 ft of Drill Pipe included
Mud Pit & Tee
1000 cfm / 250 psi Air Compressor  
Gardner Denver 5x6 Mud Pump
Bean Water Injection Pump
Cummins 350 Diesel Engine
Foller 13 Speed Transmission
Hour meter reads 1978 Hours
Mileage reads 18,687 Miles
Newer Front tires

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
1973 Built Gardner Denver 14W Drilling Rig for Sale
Gardner Denver 14W Used Drilling Rig for Sale
Gardner Denver 14W Drilling Rig - 1973 Built
Gardner Denver Drilling Rig for Sale in USA
Gardner Denver 14W Land Drilling Rig for Sale in USA

-------------------------------------------------------------------------------------------------------
Available for selling

Gardner Denver 14W Drilling Rig - For Sale
Contact Us
ID 2741
Schramm T500XD Trailer Mounted Drilling Rig for Sale
Worldoils Marketplace
Schramm T500XD Trailer Mounted Drilling Rig for Sale

Worldrigs ID: WR2921

Schramm T500XD Trailer Mounted Drilling Rig for Sale
Trailer Mounted Portable Land Drilling Rig for Sale
Schramm Drilling Rig T500XD - For Sale
Schramm T-500 Rig for Sale


Rig Specifications :

Mast Unit 
The T500XD is a trailer mounted portable land rig designed to API 4F, 7K
and 8C standards. Dual MTU V2000 diesel engines provide power to the
hydraulic system for drilling operations.
 
The trailer mounted Telemast
system consists of fewer loads and offers rapid set-up and deployment.
Automated pipe handling, slip actuation and breakout systems set this
machine apart from conventional oilfield equipment. Our Half-Triple concept
is designed to utilize Range 3 drill pipe for increased drilling efficiency and
quick trip times.
 
The mast unit is mounted on a 4 axle trailer with tandem tag axle and
includes hydraulic components necessary to transmit power to the feed,
rotation and auxiliary functions. Quick coupled hoses transmit the hydraulic
supply from the Power Unit to the rigs Mast Unit.
 
Telescoping construction permits long head travel and working height, yet
short overall length in the transport position. Equipped with a 30" (762 mm)
cylinder operated slide, the mast is free-standing, all pullback loads are
directed into the floor, not the rig frame. The mast is anchored to the rig floor
via locking pins.
 
Feed System - The top head is raised and lowered by hydraulic traverse
cylinders through 2-7/16" (63 mm) OD wire rope (370 Tons Nominal Breaking
Strength per strand) and 77" PD Nylatron sheaves. As the tophead is raised,
the inner mast section extends by a ratio of 1:2 until it reaches its fully
extended position at 56ft of head travel.
 
Top Head Travel : 56ft (17.07m)
Hookload : 500,000 lbs. Actual (227,227 kg)
 
Hoist Speed (Both Engines) 
0 - 130,000 lbs. @ 136 fpm (regen), 
101,000 lbs. - 285,000 lbs. @ 106 fpm, 
286,000 lbs. - 305,000 lbs. 100 fpm, 
306,000 lbs. - 419,000 lbs. @ 76 fpm
420,000 lbs. - 500,000 lbs. @ 64 fpm
 
Pulldown Capacity : 80,000 lb (36.363 kg)
Pulldown Speed: 0 - 180 fpm loaded, 0 - 200 fpm free head (no load)
 
Mini Lube System - A multi-point systemis provided to simplify librication 
of drill components. Provides centralized grease fitting locations for top head,
crown, jib boom.
 
Top Drive Details
The hydraulic top drive is powered by a radial piston motor and is mounted to
a tilting slabback to facilitate pipe handling functions via the LoadSafe. A
floating sub is provided to extend the life of threads by removing feed cylinder
and pipe weight forces from threads while making and breaking tool joints.
Casing lifting eyes are slabback mounted to work in conjunction with
commercially available elevator links (not included). The top drive includes a
rotation lock and rebound prevention circuitry for use when directional
drilling. An in-line mud saver valve is mounted in the top drive spindle.
Connection at top drive swivel is 3".
 
Top Drive
Horsepower: 950
Rotation Speed: 0- 140 RPM
Rotation Torque: Up to 35,000 ft/lbs
Swivel: 3" cartridge style
Fluid Pressure Rating: 5000 psi
 
Air/Mud Fluid Lines - A 4" stand pipe and traveling hose is mast mounted
and includes 1502 class hammer unions for 5000 psi operation.
 
Main Winch - A hydraulically powered winch is mounted to the side of the
mast for utility lifting operations. The winch is a planetary type with
overrunning clutch, hydraulic brake valve and spring applied hydraulic
release brake. The winch operates independently of the other drilling
functions. Winch is reeved over a hydraulic jib boom which centers the line
over the center of the borehole.
 
Model: Braden PD12C
Drum Capacity: 547 ft (167 m) of 1/2" cable (12.7 mm)
Bare Drum Pull: 9,600 lb (4,354 kg)
Bare Drum Speed: 151 fpm (46.0 mpm)
150 ft Drum Pull: 8,700 lb (3,946 kg)
150 ft Drum Speed: 165 fpm (50.3 mpm)
 
Cable Supplied : 150 ft (46 m) of 1/2" cable
(12.7 mm) HSLR (high strength low rotation) cable.
 
Explosion proof lighting is provided for nighttime operations. Lighting is 240V
and is routed through an AC distribution panel and is fed from customer
supplied generators:
 
(3) 400W Metal Halide units on mast crown
(3) 60W Fluorescent units on RH side of mast
 
Transport Dimensions : Trailer Load 1
Length : 59ft
Weight : 10ft
Height : 13ft 6"
Est. Weight : 150,000 including the tandem tag dolly
 
Power Unit
The three axle trailer mounted unit includes the engine packages and
hydraulic power systems. Four outriggers are supplied to provide a stable
platform for the power trailer. Quick coupled hoses transmit the hydraulic
supply to the rigs Mast Unit.
 
Power : 2 x MTU 12V-2000TA DDEC Tier 2, 760 bhp (567 kw) @ 1,800 rpm
w/ electric start, includes (2) two 220 gal fuel tanks, diesel air shut down
system and silencer style muffler with heat wrap on exhaust components.
Battery shut-off switch is included.
 
Cooling : 2 x Two core, side by side package, 130°F (54.4°C) ambient rating,
with 60" hydraulically driven fan.
 
Hydraulic System
Each engine is directly coupled to a pump drive gearbox
to power its hydraulic power system. To obtain full system performance, both
engines must be operated at 1800 rpm. However, when drilling conditions
permit, one engine can be operated for fuel savings and to provide
maintenance capability without stopping the drilling process. Each engine
has an identical hydraulic system so either unit can be run with the same
performance. The hydraulic system includes a 1000 gallon tank with full
return oil filtrations. All pumps are protected by suction line strainers and all
hydraulic circuits are protected by relief valves and oil cooler system.
Walkway platforms are provided for access to hydraulic tank during
maintenance operations.
 
Hydraulic System
Pumps : Each engine powers (9) pumps. (8) piston and (1) one gear type
 
Filters : (18) twin element 10-micron replaceable elements with magnetic
particle strainers on return ports. High pressure 10-micron elements are
located on the power unit, mast unit and LoadSafe
 
Tank Capacity : 1,000 gal. Magnetic strainers and shut-off valves on all
suction ports
 
Electric Heating : (10) 2,000W elements are provided in the hydraulic tank
Water Injection, Bean 35 gpm
 
A fixed displacement gear pump hydraulically drives the triplex piston pump
for coring and grouting. RPM adjustment is achieved through use of a flow
control valve and includes a gauge to monitor discharge pressure.
 
Pump Model : FMC Bean W1122BCD
Maximum Flow: 35 gpm (132.5 lpm) @ 1,000 psig (69 bar)
 
Tool Lubricator, Piston Pump
 
An air operated piston pump provides "rock drill" oil for DTH operations.
Lubricator is activated and controlled from the operators station.
 
Oil Flow : 0 - 5 g/hr (0 -18.9 l/hr)
Max Pressure: 1,000 psi (69 bar)
Reservoir Capacity: 18.1 gal (68.5 l)
 
Air Manifold - A manifold is provided for air drilling operations. The system
included a hydraulically actuated valve for the main air control and drill string
vents. Includes connections for DTH lubricator and water injections supplies.
 
Safety Equipment - (4) Four fire extinguisher and (4) four emergency stop
buttons are provided. One of each is located on all 4 corners of the power
unit.
 
Tool Box - A lockable tool box is located on the right hand side of the rig.
Capacity - 9 cu ft (.25 cu m).
 
Transport Dimensions : Trailer Load 2
Length : 49ft
Width : 10ft
Height : 12ft
Est. Weight: 85,000 lbs
 
Sub Base
The sub base is a cantilever design which offers a stable platform and
compact footprint and is a multi-piece package consisting of 5 transport
loads. The sub base includes a walking system which allows the rig to be
accurately position over the conductor hole and provides quick moves from
hole to hole while operating on pad drill sites. The walking system also
allows for re-leveling of the machine if required. The sub structure set-up
and walking systems are operated by a radio control module. Includes
staircases, walkways and railings as required.
 
Floor Height : 22ft
Clearance : 19ft under table bushing
 
Ground Pressure :
Dead Load : 26 psi
Live Load : 57 psi
Walking, Mast Down : 41 psi
Walking Mast Up : 56 psi
 
HPU for Sub Base is provided with both manual and radio remote controls :
Diesel Engine - 4-cylinder Perkins
Hydraulic System : Single fixed volume pump
Hydraulic Tank - 750 gal. with (3) 2,500W in-tank heaters
 
Walking System
The walking system consists of 4 hydraulically operated pad systems which
are located at each corner of the parallel lift sections. Lift cylinders raise the
machine 6" off of the ground and slide cylinders translate the machine 12" in
any direction in 5 degree increments. Walking Speed is 30 fph.
 
Transport Dimensions : Misc. Loads 4 - 7
 
Rig Floor and Control Room - The rig floor and control room are mounted on
a three axle trailer assembly that is integrated to the sub base during rig up
operations. The rig floor contains 37-1/2" false table adapter and a 27-1/2"
Master Bushing. The hydraulic roughneck is floor mounted and provides
make-up and breakout of tubulars up to 9-1/2" OD. A hydraulic slip lifter is
provided. Slips are provided for the following :
 
6-1/2" Collar
8" Collar
4-1/2" Drill Pipe
5-1/2" Casing
9-5/8" Casing
13-3/8" Casing
 
Power Breakout
The arm swings beneath the top head by a hydraulically powered geared
actuator. The lower jaws grab and hold the lower joint while the upper jaws
grab and rotate the upper joint to make or break the connection. Units
height is adjustable by 24" to allow for variances in the landed height of the
drill string. 2 sets of jaw dies are required to cover the full diameter range of
this unit. 8 x 3528-0011 dies are required for clamping diameters under 4-
1/2". Torque is adjustable in both the make and break directions and is
monitored via a hydraulic pressure gauge.
 
Range : 4-1/2" - 9-5/8" diameter
Clamping Force : Adjustable to 61,500 lbs @ 3000 p
Break/Make Torque : 60,000 ft/lbs @ 3500 psi
 
Main Deck Lighting :
 
(18) Metal Halide units on sub base
for the driller and LoadSafe operator. All rig and LoadSafe controls are within
easy reach of the operators. The control room is positioned to provide good
visibility of the rig floor and camera systems provide the operators with views
of the area around the LoadSafe and BOP. Accommodations are provided
for third party instrumentation packages.
 
Monitors : (3) 15" touch screen type
Controls : (2) control positions. (1) each for driller and LoadSafe operator.
Driller has (2) screens, (3) multi-function joysticks and additional control
switches. The LoadSafe operator has (1) screen and (2) multi-function
joysticks.
Seating : (2) fully adjustable swiveling chairs
Lighting : (2) 120V 60W fluorescent fixtures
Electrical Accessory Circuits: (10) duplex outlets, 80 amps total accessory
supply
Heating : air handler, 24,000 btu
Cooling : air handler, 11,000 btu
Power Requirement : 100 amp, 240V AC Single Phase. Routed through a
distribution panel.
 
The control room is equipped with hardware for wireless remote connectivity
which allows for monitoring of rig system from a remote location.
 
Transport Dimensions : Trailer Load 8
Length : 53ft
Width : 10ft
Height : 13ft6"
Est. Weight : 85,000 lbs
 
LoadSafe
The LoadSafe automated pipe handling system is skid mounted and provides
hands-free pipe handling for drill pipe, drill collars and casing. The LoadSafe
lifts tubulars from the horizontal position into alignment with tilting top head
and advances forward or slides back to allow easy interface with the top drive
spindle and will pass 24" casing. Built-in holding clamp allows for make-up or
break-out of tool joints from top drive spindle.
 
Two (2) pipe arms per side are provided with indexing systems insure that
one pipe is loaded at a time. Arms are positioned to allow the use of Range
2 or Range 3 tubulars.
 
Arm Length: 129" per side.
 
Only one set of jaws I required to cover the full range of tubular diameters
(4" -24"). The jaws are simply moved to one of 4 locations on the clamp
arms to accommodate 4 separate diameter ranges.
 
Diameter Range 1: 4" - 10"
Diameter Range 2: 10" - 14"
Diameter Range 3: 14" - 20"
Diameter Range 4: 20" - 24"
 
Six (6) hydraulic outriggers are provided to level the machine for stable
operation.
 
Capacity: Up to Range 3
Lift: Up to 10,000 lbs
Average Trip Time: 1,000 fph 
 
Transport Dimensions : Skid Load 3
Length : 53ft
Width : 9ft
Height : 6ft
Est. Weight : 55,000 lbs

BOP Carraige
BOP Carriage is designed to interface with the customers supplied BOP
transport and skid system. A trolley mounted hoist lifts BOP and rolls it into
position over the borehole. A twin beam track system is mounted to the
bottom of the rig floor during initial rig-up. This system includes a 15 ton
chain hoist.
 
Interface Connections
Includes (18) hydraulic hoses and (3) electrical cord sets required to connect
the Power Unit to the Mast Unit and the LoadSafe.
 
Paint Standard Colors
Rig Mast Trailer Unit, Sub Base and LoadSafe are painted Schramm Red.
Rig mast and control room are painted white. Mast crown, top drive and
railinngs are painted safety yellow. Two part polyurethane enamel. Sherwin
Williams Polane G+.
 
Rig Performance Parameters
TBD prior to order acceptance.
 
Start-up and Initial Testing
Drill rig components will be built in West Chester, PA, USA for deployment to
Alpha Hunter Drilling LLC rig-up yard for integration, set-up and start-up
testing. Schramm will be responsible for functional and initial testing in West
Chester and start-up testing of the rig components listed in the Scope of
Supply at the Alpha Hunter yard in PA, WV or OH (TBD) once the drilling
package is assembled. Alpha Hunter Drilling LLC will be responsible for the
components it supplies.
 
Horizontal Well Testing
Schramm service technicians and engineers will be on-site during the drilling
of two (2) horizontal wells by Alpha Hunter Drilling personnel in the PA, WV
or OH location of their choosing. Alpha Hunter Drilling LLC will be
responsible for the rig operation.
 
Training and Field Service Support
Schramm will train Alpha Hunter Drilling crews in the operation and
maintenance of the drilling rig and will be either on-site or available on a 24/7
basis during the first 6 months after delivery.

Other Considerations
It is understood that the T500XD is a prototype drilling rig, and as such, may
require additional testing, extra time for set-up, trouble shooting and field
modifications not typically associated with a production model. Alpha Hunter
Drilling will cooperate and coordinate with Schramm personnel to facilitate
testing and repairs as may be required. Schramm personnel can have
access to the rig when and where appropriate and may bring visitors to either
aid in the repairs or maintenance, or for the purpose of demonstration to
potential customers. Prototype specifications are subject to change and will
be mutually agreed to prior to implementation and may affect final price or
delivery.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


--------------------------------------------------------------------------------------------
Search words (for official use only) -
Schramm T500XD Trailer Mounted Drilling Rig for Sale
Trailer Mounted Portable Land Drilling Rig for Sale
Schramm Drilling Rig T500XD - For Sale
Schramm T-500 Rig for Sale

-------------------------------------------------------------------------------------------
Available for selling

Schramm T500XD Trailer Mounted Drilling Rig for Sale
Contact Us
ID 2921
Used 5000psi Annular BOP
Worldoils Marketplace
Used 5000psi Annular BOP

Worldrigs ID: WR299

5000psi Annular BOP for sale - Used & Refurbished
Annular BOP For Sale - 5000psi


Annular BOP model Spherical
11” x 5.000 PSI – WP
Top studded x bottom flanged 5.000 PSI – WP

2 nos. available

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


-------------------------------------------------------------------------------------------------------
Search words :
Used Annular BOP for sale
5000psi Annular BOP for sale
Refurbished Annular BOP model Spherical 5000psi
Spherical Annular BOP for sale
Annular BOP model Spherical 5000psi

---------------------------------------------------------------------------------------------------------
Available for selling

Annular BOP - 5000psi for sale
Contact Us
ID 299
HT 400 Pump with 4 1/2 Inch Plungers
Worldoils Marketplace
HT 400 Pump with 4 1/2 Inch Plungers

Worldrigs ID: WR575

HT 400 Pump with 4 1/2 Inch Plungers for Sale
HT 400 Pump with 4 1/2 Inch Plungers for Drilling in Singapore
Plungers for Drilling


Specifications

HT 400 pump with 4 1/2 " plungers
Max pressure 11,200 psi
Max vol. 10.8 bbl per min coupled with GM 8V71 engine and
Allison 750 transmission
All on a skid

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need, please send
us an email to mail@worldoils.com stating your requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------
Search words(for official use only) -
HT 400 Pump with 4 1/2 inch Plungers For Sale
Plungers for Drilling
Used HT 400 Pump with 4 1/2 Inch Plungers in Singapore
HT 400 Pump with 4 1/2 Inch Plungers for Drilling in Singapore
Drilling Equipment - HT 400 Pump with 4 1/2 Inch Plungers

------------------------------------------------------------------------------------------
Available for selling

HT-400 Pump with 4 1/2 Inch Plungers for Sale
Contact Us
ID 575
Drilling Rig - Schramm T130 - For Sale
Worldoils Marketplace
Drilling Rig - Schramm T130 - For Sale

Worldrigs ID: WR846

Schramm T130 Drilling Rig for Sale
Drilling Rig - Schramm T130 - For Sale


Model : T130 Drill Rig
Manufacturer : Schramm
Condition : Used

Description :

Schramm T130 Drill Rig
Diesel Deck Engine
Mounted on a CCC Truck
Diesel Engine

Included as a package:
4-1/2" Bottle Neck X Hole Drill Pipe
6" Collars = 90 ft
All Subs needed to drill
Spare Motor
Spare Parts : Top Drive (Rebuilt no hours), New Spindle,
Bearings for top drive, Chive Crown
Pipe Racks with Catwalk (30 ft L X 5 ft W X 3-1/2 ft T)

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Schramm Drilling Rig for Sale
Used Schramm T130 Drilling Rig for Sale
Schramm T130 Drilling Rig for Sale in USA
C for Sale
Schramm Used Drilling Rig for Sale in USA

-------------------------------------------------------------------------------------------------------
Available for selling

Schramm T130 Drilling Rig - For Sale
Contact Us
ID 846
Foremost CTR Single Coil Tubing Hybrid Drilling Rig - 2005 Built
Worldoils Marketplace
Foremost CTR Single Coil Tubing Hybrid Drilling Rig - 2005 Built

Worldrigs ID: WR2778

Foremost CTR Single Coil Tubing Hybrid Drilling Rig for Sale
Foremost CTR Single Coil Tubing Hybrid Drilling Rig - 2005 Built


Description :

Drawworks :
Foremost Hydraullic Drawworks, 95,000 LB Capacity, 400 ft
Drum Capacity

Drawworks Power : Detroit Series 60 Floor Engine

Hydraullic Power Unit :
W/(5) Main Hydraullic Pumps, Hydraullic Reservoir, Thermal
Exchanger, Plumbing, Filters

Mast :
Foremost 85 ft Mast, 140,000 LB Maximum Hook Load w/(4) Lines,
1" Drill Line, (2) 4 Stage Mast Raising Cylinders, Chains, Stand
Pipe, Hydraullic Piping, Utility Winch, Access Ladder, Lighting,
Fall Arrest

Substructure :

Foremost Trailer Mounted Raised Substructure; Sliding Trolley BOP
Handler w/(2) Hydraullic Cylinders, Manual Cellar Controls, Standpipe
Valve, Steam Manifold, Explosion Proof Lighting, Mounted on 2005
Peerless T/A 16 Wheel Trailer, Tires 11 R22.5, Steel Buds, Spring
Suspension, w/ Rear Outriggers, Front Levelling Jacks, Hydraullic &
Electrical Lines"

Rotary Table :
16" Rotary Table, w/1,600 LB Torque, 140,000 LB Maximum Load

Top Drive :
Fluid Design Solutions Model FDS240T 70 Ton Hydraullic Top Drive
w/ Integrated Swivel, Integral Travelling Block & Backup Leg

Injector :
Steward Stevenson Model M1100SK Injector, 110,00 LB
Lifting Capacity, 60,000 LB Snub Capacity

Hydraullic System & Components :
Raising Cylinders, Winches, BOP Handler, Doghouse Raising System,
Hoses, Filters,Valves

(1) Set Web Wilson Type AAX Manual 27/8"-95/8" Rotary Tongs
(1) Drill Pipe Elevator

Set Handling Tools :
Drill Pipe, Drill Collar Slips, Safety Clamp, Drill Pipe Elevators
Townsend Type 85 SPH Annular Preventer, 9"x 3,500 psi
(2) Townsend Model T88 Ram Preventer, 9"x 3,000 psi
Control Tech Working Spool, 9"x 3,000 psi, w/2" Outlets
Control Tech Crossover Spool, 7"x 3,000psi

Mud Pump :
Mastco Pump Shack, Model JBI JF800 Triplex Mud Pump, Detroit Series 60
14.7 Liter 700 Hp Diesel Engine, Tool Shop

Mud System :
358 BBL Mud Tank, (4) Compartments-17 BBL Trip Tank, 88 BBL Suction Tank,
125 BBL Settling Tank, 125 BBL Shaker Tank, Mix Pump,MixingGuns, Manifold

Swaco Mongoose - PT Elliptical - Motion Shale Shakers
(4) Mud Guns, (9) Flow Gates & Skimmers
Poorboy 28" In-Tank Degasser w/150 ft of 8" Vent Line
Chemical Mix Barrel w/5 Hp Electric Motor

(2) Mission Model 40202529 6x5x11 Pumps, w/ 50 Hp Electric Motor, 4" Manifold,
w/(7)4" Butterfly Valves, Hopper, Storage Compartment, Exhaust Fan, Mud Weight
Station, Pason Equipment

Drill Pipe :
(196)Joints 3 1/2" Range 3 Grade E Drill Pipe, w/ 3 1/2" IF Connections
(23) Joints 4" Range 3 Grade E Drill Pipe, w/ 3 1/2" IF Connections
(10) Joints 4 3/4" Drill Collars, w/ 3 1/2" IF Connections
(10) Joints 6 1/4" Drill Collars, w/4 1/2" XH Connections
(20) Joints 3 1/2" Hevi-Weight Drill Pipe, w/ 4 1/2" XH Connections

Combination Building :
12 ft x 54 ft Mounted on 4 Member Skid, Electrical Switchgear, Transformer,
Accumulator Plumbing, (15) Lockers, (2) Benchesw/ 9,000 Liter Fuel Tank,
(4) Product Tanks

Generator 1 :
Stamford Model 6063-MK35 350 KW Generator,w/ Detroit Series 60 475 Hp Diesel
Engine, w/ Electric Start, Lockout Box

Generator 2 :
Stamford Model IEC34-1 142 KW Generator,w/ Jhon Deere 190 Hp Diesel Engine,
w/ Electric Start, Lockout Box

MCC Panel, Transformer, Starters

Accumulator :
Control Tech Model Class 3 Accumulator, 80 Gallon Accumulator,5 Station Control,
3,000 psi w/ 178 Gallon Reservoir, PLC Remote, Cat Model Triplex Pump

Air Compressor :
National Compressed Air Model NCA-16-34GSD Air Compressor, w/ Sullair 2

Stage Air Compressor, 200 Hp Elecric Motor, 2005 Avis Welding & Fab 600

Instrumentation : 
psi Receiver,Selectronix Model ST-8 Instrumentaion

Diesel Day Tank, Liner Rack, Utility Bench, Tooling, Storage Cabinets
Explosion Proof Lighting
Weight Indicator, Rotary Torque Gauge, Pump Pressure Gauges, Tong Line
Gauges

Safety Equipment :
(3) Scott Air packs w/ (2) Spare Bottles, Fire Extinguishers, Welding Shields,
Safety Glasses, First Aid Kits, Stretcher, Eye Wash Stations,Safety Signs,
Lanyards

General Rig Tooling, Consumables, Rig Supplies, Spare Parts

Dog house :
9ft x 14ft, Drillers Control Console, Instrumentation, Storage Cabinets/Bench,
Stabbing Valve, Ruffneck Heater, A/C, Shelving

Tool House :
314 BBL Water Tank, Access Stairs, Safety Rails, Lubster, Cat Model 310 Triplex
Wash Pump, Utility Bench, Fastener Bins, Ruffneck Heater, Storage Compartments,
Tooling

Crew House 2005 Shelter Rig Managers Wellsite :
11.5ft x 45ft, Crew Washroom, Storage Area, Desk, Couches, Fridge, Stove,
Washer, Dryer, Washroom, Sleep Area Hydraulic Catwalk w/ Operator
Enclosure, Integral Hydraulic Power Unit, (4)  Swing Out Arms, (4) Levelling
Jacks, Hydraulic Pump w/ 50 Hp Electric Motor, (3) Hydraulic Pipe Tubs
w/ Controls, Manifold

2048-F
Choke & kill Line Valves, 2"x 3,000 psi w/ Hi-kalibre HCR, Manual Gate Valves,
Check Valves
Choke Manifold, 3" Gut Line x 5,000psi,w/ (2)2" Wing Lines, (8)2" Gate Valves,
(2)3" Gate Valves, Cortec 2" Chokes x 5,000 psi
Flare Tank skid mtd w/7ft x 8ft x 7ft Tank, w/(2)2",(1)6" Knockouts, 3" Flare
Line, 6" Degasser Line, Safety Rails, Stairs
Boiler : 2005 Williams & Davis 777 Volcano 100 Hp Boiler
(4)2m x 5m Rig Mats

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
2005 Built Foremost CTR Single Coil Tubing Hybrid Drilling Rig for Sale
Foremost Coil Tubing Hybrid Drilling Rig for Sale
Used Foremost CTR Single Coil Tubing Hybrid Drilling Rig for Sale
Foremost CTR Single Coil Tubing Hybrid Drilling Rig for Sale in USA
Foremost Combo Top Drive & Coil Tubing Drilling Rig for Sale

-------------------------------------------------------------------------------------------------------
Available for selling

Foremost CTR Single Coil Tubing Hybrid Drilling Rig for Sale
Contact Us
ID 2778
New UMD 110 Land Drilling Rig - For Sale
Worldoils Marketplace
New UMD 110 Land Drilling Rig - For Sale

Worldrigs ID: WR593

UMD 110 Land Drilling Rig - For Sale in Europe
New Semi Mobile Drilling Rig For Sale - UMD 110


Main Technical Specifications

Engine type : C 13 ACERT
Nominal engine power hp (kW) : 415 (309)
Transmission : Allison 4500 OFS
Nominal hoisting capacity metric ton (lbs) : 110 (242000)
Workover  depht (m) drill pipe (2 7/8”) : 4500
Drilling depht (m) (4 1/2“) : 1500
Rope diameter (mm) : 26
Mast height (m) : 32
Drilling floor height (m) : 5
Travelling system : 4x3
Working pressure (mpa) : 0, 65-0, 8

Technical Specifications

Drawworks
Main Drum -
Input power (hp) : 450
Barrel size : D18”  W38”
Brake rim size : D44” W12”
Wire line size : 1 ” (26 mm)
Drum speed : 6F/1R
Brake cooling : Water circulation
Brake system : Band / disc / auxiliary (Parmac SSR-28 hydro-brake)
Lubrication : Automatic or manual
Drum clutch : Air flex type
Chain drives :
All chains are fully encloded for oil bath lubrication ensuring longer life
and cleaner operation

Sand Line Drum -
Barrel size : D13”  W37“
Brake rim size : D44” W9½”
Spooling capacity : 16114’
Sand line wire size : 9/16” (14 mm) - 5/8” (16 mm)

Rig Power & Transmission

Diesel engine(s) : Caterpillar C-13 ACERT, 415Hp, 2.100rpm
Transmission(s) : Allison OFS 4500 series with torque converter
Right angle gear box : Min 500 HP gear box in oil bath gear case
Compound box :
Twin engine drive through transmission includes disconnect clutches at
compound shaft for engines

Mast  & Crown Block
Mast -
Mast complete set : Design and conform to APİ 4F specification
Mast height : 32m  ( 118ft  )
Max. static hook load capacity : 1.100kN  ( 250.000lbs )
Racking capacity : 1.500m ( 4 ½’’ DP,19.2m double )
Height of the monkey board : 17.2m ( from floor )
Accessories : Standpipe , exproof  lightning....etc
Mast type : Hydraulic telescopic

Crown Block -
Crown block complete set : Design and conform to APİ 4F  specification
Max. hook load : 1.100kN (250.000lbs )
Number of sheaves : (2)  Main + (1) fast line  +  (1) deadline +  (1) sandline
+  (2) sheaves for service winch

Sheaves OD :
Fast Lines Ø32" ( Ø813mm )
Dead Line Ø28" ( Ø711mm )
Sand Line Ø28" ( Ø711mm )

Dia. of sheave’s grove :
Fast & Dead Lines Ø1" ( Ø26mm )
Sand & Winch Lines  Ø 5/8" ( Ø16mm )

Traveling Block  & Hook
Traveling block : 1.100kN Max. statik load, 3 sheaves, Ø32’’ sheaves
dia. Ø1’’  (Ø26mm ) groove dia.

Hook : 1.100kN Max. statik load, 3tons spring stroke.
Elevator link(s) : 1.100kN rated load capacity.

Swivel
Static hook load, ton : 110
Working pressure, psi : 5,000
Maximum speed, rpm : 300
Coupling thread to stem : 4-1/2" Reg LH
Coupling thread to kelly : 6-5/8" Reg LH
Stem İ.D. : 2-1/2"

Trailer  & Other  Systems
Trailer :
Three axles semi mobile trailer, 12 wheels, fabricated high tensile steel vehicle
frame reinforced at points of greatest stress. Highway equipment and cab included.
İnstalled fuel tank.

Tool box. Auxilary drill line drum, all axles dressed brake, folding walkwayss on
both sides of trailer.

Hydraulic jacks : Four hydraulic operated leveling jacks
Hydraulic service winch : 5 metric tons drum pull capacity
Deadline anchor : Deadline anchor attached directly to trailer frame
Air system : Compressor (engine drive), air tank, relief valves, air dryer, gauges, all clutches

Hydraulic system :
Hydraulic pump, system operate hydraulic cylinders on mast, hydraulic jacks,
hydraulic pipe tong, and hyraulic winch. Control valves, hydraulic oil tank, filters, pipes,
hydraulic and air valve connections, fittings.

Electrical lighting system : All the electrical equipments on the mast, and substructure
are ex-proof type

İnstrumentation : Driller control panel, weight indicator, gauges, air valves, cables , hoses,
fittings, transducers, paint

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


Land Drilling Rig


----------------------------------------------------------------------
Search words(for official use only) :
UMD 110 Drilling Rig For Sale in Europe
New UMD 110 Semi Mobile Drilling Rig For Sale
New Semi Mobile Drilling Rigs
Land Drilling Rigs For Sale
New Land Drilling Rig

---------------------------------------------------------------------
Available for selling

UMD 110 New Land Drilling Rig - For Sale
Contact Us
ID 593
Canterra CT-350 Drilling Rig for Sale
Worldoils Marketplace
Canterra CT-350 Drilling Rig for Sale

Worldrigs ID: WR2776

Canterra CT-350 Drilling Rig for Sale
Canterra CT-350 Drilling Rig - 1989 Built - For Sale


Model : CT-350 Drill Rig
Manufacturer : Canterra
Year : 1989
Condition : Used

Description :

Canterra CT-350 Drill Rig
Mounted on a 1989 Ford Truck
5-speed transmission with 2-speed rear
Diesel engine
Rod rack and plumbing for rotary option
Brand new hydraulic system installed in early 2019
(only 6 wells drilled in since)
Main line and sand line with free fall and spudder option
We would drive the wells in with a spudder option
Auger rack on the drivers side
Rod rack and tool box on the passenger side
Hydraulic Leveling Jacks

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
1989 Built Canterra CT-350 Drilling Rig for Sale
Used Canterra CT-350 Drilling Rig for Sale
Drilling Rig - Canterra CT-350 - 1989 Built
Canterra CT-350 Drilling Rig for Sale in USA
Canterra Land Drilling Rig for Sale in USA

-------------------------------------------------------------------------------------------------------
Available for selling

Canterra CT-350 Drilling Rig - 1989 Built - For Sale
Contact Us
ID 2776
Drilling Rig - Gus Pech 1000R - 1989 Built
Worldoils Marketplace
Drilling Rig - Gus Pech 1000R - 1989 Built

Worldrigs ID: WR2777

Gus Pech 1000R Drilling Rig - For Sale
Drilling Rig - Gus Pech 1000R - 1989 Built


Model : 1000R Drill Rig
Manufacturer : Gus Pech
Year : 1989
Condition : Used

Description :

Gus Pech 1000R Drill Rig
Set up for Mud Rotary & Auger
Mounted to a 1989 International 1900 Truck
5 speed transmission 2 speed rear
1936+ hours on rig
3 x 4 centrifugal mud pump
3" plumbing to side swivel
450 ft of (4.5″ x 3-2-7/8") drill pipe & holds 225 ft on board the pipe rack
Mud pan attaches to back of rig for transport
Comes with CAT head and auger attachment
3 winches
Jib winch Pullmaster winch 8500 lbs with rapid reverse
wire line for test sampling
2000 lbs sandline
Developmental air compressor
Tophead slides off pole to set pipe
Hydraulic Leveling Jacks

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
1989 Built Gus Pech 1000R Drilling Rig for Sale
Used Gus Pech 1000R Drilling Rig for Sale
Gus Pech 1000R Land Drilling Rig for Sale
Gus Pech Drilling Rig for Sale in USA
Gus Pech Used Drilling Rig for Sale in USA

-------------------------------------------------------------------------------------------------------
Available for selling

Gus Pech 1000R Drilling Rig - For Sale
Contact Us
ID 2777
Offshore Rig DP2 New System For Sale - Alstom
Worldoils Marketplace
Offshore Rig DP2 New System For Sale - Alstom

Worldrigs ID: WR645

Offshore Rig DP2 New System For Sale
Rolls Royce Aquamaster Thrusters and Alstom DP2 - New
Complete New Offshore Rig DP2 Package for sale
Complete New Ship DP2 Package for sale

“Six” Rolls Royce Bergen Model- B32 40L9A- 9 cylinder 5666 bhp
 @ 720 rpm 4 MW 11000 Volt @ 60HZ each.

Generators are ABS Marine certified and Heat exchanger cooled,
skid mounted.

Complete with all controls and switchgear

Alstom/Converteam, DP2 system

Complete with MV3000 Variable speed Drives 

“9”Rolls Royce 3MW Aquamaster UUC305 FP Thrusters 
underwater mountable

Complete with Electronic and Hydraulic controls Max torque 39.8 KNm,
3200mm prop. Ratio 3.5-1, Prop. Speed 260 rpm ABS Marine certified.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

--------------------------------------------------------------------------------------------------------- 
Search words(for official use only) - 
Offshore Rig DP2 system For Sale - New
Rolls Royce Aquamaster Thrusters and Alstom DP2 - New
Complete New Offshore Rig DP2 Package for sale
Complete New Ship DP2 Package for sale
Complete New Alstom DP2 system for sale
Rolls Royce Bergen Gensets for sale
Rolls Royce Aquamaster Thrusters for sale 
Rolls Royce Bergen Gensets for sale - New

-------------------------------------------------------------------------------------------------------

Available for selling

Offshore Rig DP2 New System For Sale - Alstom
Contact Us
ID 645
Platform Supply Vessel
Worldoils Marketplace
Platform Supply Vessel

Worldrigs ID: WR485

Platform Support Vessel for Sale
PSV for sale
Newbuilding PSV for sale


Delivery Q1, 2011

Principal Particulars :
Port of Registry : TBA
Length Overall : 74.87 m
LBP : 67.2 m
Breadth Moulded : 16.4 m
Depth Moulded : 7.45 m
Max. Draft : 6.23 m
Depth shelterdeck : 10.20 m
Deadweight at SWL : approx. 3,250 tonne
Gross Tonnage : approx. 2,820 tonne
Net Tonnage : approx. 1,060 tonne
Deck Loading : 5 tonne/m2
Clear Deck Area : 684 m2
Speed : 13 Knots
Classification : DNV+1A1(E)-E0-SF,dk(+),hl (2,5),AUTR,LFL*,
COMF-V (rating 3)

Main Machineries :
Main Engines : 4 x 1,239 eKW
Total Power : 4,956 eKW
Propulsion System : 2 x Rotatable (360 degree) Stern mounted el. Motor
Driven Azimuth Thruster Type Twin (Push and Pull)
Bow Thruster : 2 x Fixed Pitch Tunnel Thruster
Generator : 4 x 1,239 eKW, 690V/60HZ
Emergency Generator : 1 x 99 KW, 690V/60Hz

Tank Capacities :
Fuel Oil Tank : 1266 m3 (approx)
Liquid Mud (s.g 2.5) : 1083 m3 (approx)
Water Ballast : 1100 m3 (approx)
Drill Water : 930 m3 (approx)
Fresh Water : 650 m3 (approx)
Brine (s.g 2.5) : 424 m3 (approx)
Methanol (s.g 0.9) : 206 m3 (approx)
Base Oil (s.g 0.9) : 340 m3 (approx)
Glycol : 1290 m3 (approx)
Deck Cargo : 684 m2 (approx)
Bulk Cargo (Cement) : 256 m3 (approx)

Accommodation :
Single Berth : 4 x 1 Berth
Double Berth : 18 x 2 Berth
Total Complement : 40 Berth
Hospital : 1 room

Cargo Discharge Rates :
F.O. Cargo Pump : 1 x 200 m3/hr (Freq. Controlled)
F.W. Cargo Pump : 1 x 200 m3/hr (Freq. Controlled)
Base Oil Pump : 1 x 150 m3/hr (Freq. Controlled)
Methanol Pump : 2 x 75 m3/hr (Centrifugal)
Ballast / G.S. Pump : 1 x 150 m3/hr (Freq. Controlled)
Liquid mud Pump : 2 x 85 m3/hr (Freq. Controlled)
Brine Pump : 1 x 125 m3/hr (Freq. Controlled)
Deck Cranes : 1 x 3 tonnes @12 m, Knuckle Boom Type with 4m Jib
Cargo Securing Winches : 3 x 3 tonnes hoisting capacity 5 tonnes brake
Capstan : 2 x 10 tonnes
Anchor Windlass : According to class

Navigation & Communication Equipment :
1 Main Radar, ARPA 120 NM
1 Secondary Radar, 96 NM
1 Echo Sounder
1 Speed Log
1 Auto Pilot
1 Conning Display System
1 ECDIS
1 Clinometer
1 unit GMDSS extended packaged
1 Navigation / Direction Finder
1 NMEA Distribution unit with interface to DP
1 GyroCompass
1 off 12 channels DGPS satellite type FURUNO - 90
VHF and UHF Radio Telephone System
Intercommunication System with PABX line and line from VSAT
Command and Intercomm System
Sound Powered Telephone System

Fire Fighting System :
Internal FiFi System : FiFi System with CO2
FiFi System with Water mist
FiFi System With Hand Extinguisher
FiFi System With Spot FOG (Galley)

Life Saving Equipment :
MOB Boat with Davit : 1 off SOLAS approved type
Life Raft with Equipment : SOLAS approved type for 120 persons
Life Jacket : SOLAS approved type for 40 persons

Price & terms : Please enquire using the email form below

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
-------------------------------------------------------------------------------------------
Search words (for official use only) - 
Platform Support Vessel for Sale
MT 6009 MK II Platform Supply Vessel for Sale
Platform Support Vessel for Sale For sale
New PSV for Sale
MT 6009 PSV for Sale
Newbuilding PSV for Sale
Platform Support Vessel

-----------------------------------------------------------------------------------------

Available for selling

Platform Supply Vessel MT 6009 MK II - for Sale
Contact Us
ID 485
Shallow Draft Utility Vessels
Worldoils Marketplace
Shallow Draft Utility Vessels

Worldrigs ID: WR175

Towing / Utility / Supply Vessel for sale
Shallow Draft Utility Vessels - 2000bhp

General
Year Built : 1982
Classification : ABS + A1 + AMS + E and BKI
Dimension : 38.0 m x 9.5 m x 3.6 m
Draft - Light : 1.69 m
Loaded : 3.23 m
GRT : 413 NRT : 124
DWT : 475 tons

Cargo Capacity
Fuel Oil : 196 m3
Potable Water : 118 m3
Deck Cargo : 150 tons
Clear Deck Space : 15.0 m x 7.5 m

Refrigerated Storage Capacity
Freezer : 2 m3
Chiller : 2 m3

Accommodation
1 man cabin : 2
2 men cabin : 4
4 men cabin: 4
Total: 26(Fully Airconditioned)
Navigation & Communication
All round view wheelhouse.
Forward & aft control consoles(Pneumatic&Hydr.)
Radar, echo sounder, auto-pilot , Weather Fax
Gyro/magnetic compasses , GPS , SSB , VHF
Intercom/P.A. system , Navtex Receiver , EPMIRB

Anchor And Cable
Anchor : 2 x 690 kg each Stockless Anchor

Towing Equipment
Winch: 1 x single drum, 40 T Stall Pull
Drum Capacity: 700 m x 40 mm dia. Wire
Tugger winch : 1 x 5 MT line pull
Main Machinery & Propulsion
Main Engine : 2 x FUJI 6M23C, each 1000 BHP
Propulsion: 2 x CPP in Kort nozzles
Auxiliary Engine : 2 x Mitsubishi S6B-MPTK(ea 265 HP)
Alternator : 2 units, 200KVA each, 415V/3P/50Hz
Bow Thruster : 1 x 110 KW Electric Driven, 1.7 tons thrust

Cargo Pump Capacity
Fuel Oil : 60 m3/hr @ 40 m head
Potable Water : 60 m3/hr @ 40 m head
Ballast pump : 28 m3/hr @ 30 m head

Fire Fighting & Anti-Pollution
Pump : 1 x 300 m3/hr at 120 m head
Monitor : 2 x 2300 ltrs/min at 100 m head or 10 kg/cm2
Foam Tank : 4770 ltrs
Oil Dispersant Tank : 4770 ltrs
Spray Boom : 2 x 6 m length

Speed
10 knots

Bollard Pull
will be tested when required

Inspection/Delivery Far East As Is Where Is.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------
Search words :
Utility vessel for sale
Utility vessel for charter
Towing / Utility / Supply Vessel - 2000bhp
Shallow Draft Utility Vessels for sale

-------------------------------------------------------------------------------------
Available for selling

Shallow Draft Utility Vessels for sale
Contact Us
ID 175
PSV UT755LN for charter
Worldoils Marketplace
PSV UT755LN for charter

Worldrigs ID: WR72

PSV for Time Charter
UT755LN PSV for time charter

General

DPII FiFi1 UT755LN PSV
Class Notation : DNV 1A1 Fire Fighter I+SF E0 DYNPOS-AUTR CLEAN BIS TMON
Year of build : 2009

Main Particulars
Design : UT755LN
LOA : 73.6 m
Length BP : 68.3 m
Breadth Moulded : 16.0 m
Depth Moulded : 7.0 m
Max Loaded Draft : 5.87 m
Deadweight : 3250 T
Deck Area : 708 sqm

Performance
Trial Speed / Max : 13 knots (16T/24hrs)
Cruising Speed : 11 knots (12.5T/24hrs)
Economical Speed : 10 knots (10.5T/24hrs)

Capacities
Dry Bulk : 11250 cuft
Potable/Fresh Water : 840 m3
Drill/Ballast Water : 850 m3
Brine/Mud : 970 m3
Base oil : 200 m3
Fuel Oil : 950 m3

Deck Equipment
Capstans : 2 x 8 T
Tugger Winch : 2 x 10 T
Deck Crane : 1 x 3 MT @ 16 m

Discharge
Dry Bulk : 1 x 805 cuft/min
Fresh Water : 1 x 200 m3/hr at 9 bar
Drill/Ballast Water : 1 x 200 m3/hr at 9 bar
Brine/Mud : 2 x 75 m3/hr at 9 bar
Base Oil : 1 x 150 m3/hr at 9 bar
Fuel Oil : 1 x 200 m3/hr at 9 bar

Propulsion and Machinery
Main Engines : 2 x 2725 BHP/2005 KW
Total Main Engines : 5450 BHP / 4010 KW
Maine Engine Type : 2 x Ulstein Bergen
Propellers : 2 x CPP

Thrusters
Bow 1 : 1 x 600 KW/815 BHP
Bow 2 : 1 x 600 KW/815 BHP

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------------------
Search words(for official use only) -
New PSV for Time Charter
PSV for Charter
UT755LN for charter
PSV available for Time Charter
New UT755LN PSV for Time Charter

-----------------------------------------------------------------------------

Available for selling

PSV UT755LN for Charter
Contact Us
ID 72
   
1 2 3 4 5 6 7 8 9 10
  




Untitled Document
Worldoils Brokering & Services - Land Rig Brokers, Offshore Rig Brokers
Land Rig Barge Rigs Semi Submersible Rig Jackup rigs Oil, Gas and Offshore Marketplace Oilfield Container Camps / homes / cabins
Oil Rigs : Land Rigs Oil Rigs : Barge Rigs Semi Sub Rigs Oil Rigs : Jackup Rigs Oil & Gas Marketplace Oilfield Camps
Worldoils Brokering & Services - Land Rig Brokers, Offshore Rig Brokers
Land Rig Barge Rigs Semi Submersible Rig
Oil Rigs : Land Rigs Oil Rigs : Barge Rigs Semi Sub Rigs
Jackup rigs Oil, Gas and Offshore Marketplace Oilfield Container Camps / homes / cabins
Oil Rigs : Jackup Rigs Oil & Gas Marketplace Oilfield Camps
Worldoils Brokering & Services - Land Rig Brokers, Offshore Rig Brokers
Land Rig Barge Rigs
Oil Rigs : Land Rigs Oil Rigs : Barge Rigs
Jackup rigs Oil, Gas and Offshore Marketplace
Oil Rigs : Jackup Rigs Oil & Gas Marketplace
Semi Submersible Rig Oilfield Container Camps / homes / cabins
Semi Sub Rigs Oilfield Camps

.......................................................................
www.worldoils.com  |  Disclaimer  |  Ethics