Equipment ID: 495
Equipment name: Cabot 750 Mobile Carrier Rig - for sale
Category: Land Rigs
Sub Category: Land Rigs

Specifications: Cabot 750 Mobile Carrier Rig for Sale
Used Cabot 750 Land Rig
Cabot 750 Refurbished Drilling Rig
Mobile Land Rig For Sale

Self propelled carrier specifications mechanical drive arrangement

Model 2042 drawworks specifications mechanical drive arrangement

Drawworks Horsepower Rating : 550-700
Drum Dia. x Length : 19 5/8" x 40"
Grooving-Counterbalanced LeBus : 1 1/8"
Brakes, Water Cooled (Dia. x Width) : 42" x 12"
Effective Brake Area : 3,050 Sq.Inches
Hoisting Speeds : 5 Forward, 1 Reverse
Rotary Speeds : 5 Forward, 1 Reverse
Parmac Brake : 202 or equivalent

Drum Clutch : PO 24" 2 Plate
Rotary Clutch : PO 18" 2 Plate
Brake Clutch : Positive Jaw
Drum Drive Chain : 1 1/2" Quad
Jackshaft Drive Chain : 1 1/4" Quad
Rotary Drive Chain : 1 1/2" Double
Brake Drive Chain : 1 1/4" Triple

Model 112-300 Mast Specifications
Type-Telescoping, Hydraulic Raised & Extended, Tilted
Clear Height (with 15' Floor) : 97'-0"
Leg Spread : 7'-6 1/2"
Mast Tilt : 2 3/4 degree
Hook Load Capacity (API Std. 4E) :
6 Lines 281,000#
8 Lines 300,000#

Crown (Std.) :
Fast Line & Dead Line Sheave : 1-36" & 1-30"
Cluster Sheaves : 4-30"
Racking Capacity :
Range 2 Doubles - 4 1/2" OD Drill Pipe, 6 1/2" OD. T.J  9,500'
4" OD Drill Pipe, 6 1/8" OD. T.J  10,000'
Wind Rating with Full Setback : 69mph (60Kts.)
Raising System : Two 3 Stage Double Acting Rams
Extending System : Two 1 Stage Single Acting Rams

Note : Four wind guys to crown and cross guys to racking board are recommended for wind stability.

Substructure Specifications*
Type-Cross-Type, Single Piece, Telescoping
Floor Height : 15'
Bottom of Rotary Beam Clearance : 12'-0"
Floor Size, Length x Width : 13'-8" x 26'-0"
Ground Overall Dimensions, Length x Width : 40'-0" x 12'-0"
Rotary Capacity : 350,000#
Setback Capacity : 200,000#
Total Simultaneously Capacity : 550,000#

*Optional Types Available
Carrier Model : C7-762-293
Wheelbase (from centerline of front triple to centerline of rear triple) : 293"
Type Frame (High strength steel) : 20 3/4" Fab.Channel

Type Suspension :
Front-Spring
Rear-Walking Beam
Third Axile Air

Front Axile : (3) DCB
Service Rating 66,000#

Rear Axile : Triple w/DP 480 P
Service Rating 68,000#

Standard Tires :
Front: 18.00 x 22.5  16 Ply Duplex
Rear : 10.00 x 20  12 Ply Nylon

Typical Rig Field Weights

Front : 57,100#
Rear : 61,800#
Total : 118,900#

Typical Power

Engines (HP @ RPM)

Note : Horsepowers shown are manufacturer's ratings at SAE Standard conditions
(85 degree fahrenheit and 500'altitude). Deduction must be made for fan,
compressors, and intake and exhaust system losses.

(2) DDA 8V-71N @ 304 HP each, Total 608 HP @ 2100 RPM.
(2) Catepillar 3406 @ 360 HP each. Total 720 HP @ 2100 RPM.
(2) DDA 8V-92N @ 360 HP each. Total 720 HP @ 2100 RPM.

5,000'-7,500' Nominal depth range, 4 1/2" D.P., Doubles
700 Horepower. Mechanical Drive : Two engines with torque converters
Electric Drive : one DC traction motor

The 750 Series Drilling Rig has proven itself to be fast moving reliable rig of simple
and rugged construction. It is available in the following forms: A self propelled mechanical 
drive rig; a split trailer mechanical drive rig; a split trailer electric drive rig.

As a self propelled mechanical drive rig, the Model 2042 drawworks, telescoping mast, 
oil bath chain case elevated ratary drive and two engine rig power are unitized into one 
self propelled rig load.

As a split trailer mechanical drive rig, the drawworks and two engine rig power are mounted 
on one trailer and the telescoping mast and oil bath chain case elevated rotary drive are
mounted on a second trailer. The two trailer design accomplishes package weight control 
where permit limits may cause problems.

As an electric rig, an electric drive drawworks group has been developed using one 700 HP 
traction motor for both single and double drum drawworks and for the rotary drive. 
The drawworks, motor and hydraulic power unit are mounted in one self propelled package.

Both of the rig arrangements above are combined with a rig base and selection of single 
piece or multiple piece substractions to complete the rig. This rig in conjuction with single
load mud pump pacakages with independent power results in an extremely flexible arrangement.

Mechanical Drive Arrangement

Power - Two engines (any make) totaling upto 700 HP at 2100 RPM. The side-by-side 
engines are high mounted for easy accessibility and maintenance. Either or both engines 
can be used for hoisting, rotary or roading operations.

Torque Converters  - Two torque converters individually matched to engines provide 
maximum output power for single or two engine operation at full load or part load. Lockup 
feature in each converter for maximum efficiency.

Transmissions - Allision HT 750 DR,unitized with torque converters. Five forward speeds. 
Finger tip selection at driller's console with full load shift capability allows maximum flexibility 
of power application to job at hand.

Compound - v-Type roller chain compound in pressure lubricated oil bath case. Each engine 
can be disconnected in compound. Integral gear tranfer chase for vehicle drive.

Drawworks - Model 2042 drawworks with 19 5/8" diameter drum barrel 40" long. 12" x 42" 
circulating water cooled brake rims with full Wrap, single point adjusted, fully equalized brake 
bands. The easy access outboard drum cluch generates 40,000# single line pull. 
Paramac 202 single rotor brake assist with positive action clutch.

Catworks - Hydraulic catworks, including breakout cylinder, spinning and make-up cylinder
and planeatary gear, self-locking handling winch for smooth, safer catheading operations.

Drawworks Drive - Heavy-duty propeller shaft through Model 600 right-angle gear box.

Rotary Drive - Propeller shaft via full air rotary clutch, heavy duty reverse gear box and oil bath 
roller chain elevated rotary drive unitized on back face of mast. Simple propeller shaft connection 
at rig-up and rig-down. Nominal max. rotary speed-300 RPM.
Nominal working table torque - 30,000 ft. lbs.

Carrier - Mechanical drive rig provided with six axle triple front, triple rear 134,000# capacity 
carrier. Designed to meet highway safety standards with necessary toughness for off highway 
operations.

Electric Drive Arrangement
The 750E Series rig is designed as an SCR electric powered rig. One GE 761 (or equivalent)
700HP traction motor provides power to both the drawworks and the rotary. The drawworks 
drive is a two speed high/low drum clutch arrangement. An optional sand drum assembly may 
be mounted in the drawworks group. The rotary drive is taken from the drawworks drive via a 
Model 600 right angle gear box. The full air rotary clutch is mounted on a right angle drive 
output shaft. A propeller shaft drive and oil bath roller chain elevated drive mounted on the 
back face of the mast complete the rotary drive.

Features common to both mechanical and electrical drive
Mast - 112'300,000# API-rated telescoping mast. Dual ram hydraulically raised and extended.
Tubular construcion offering maximum rigidity and capability to withstand abuse. Patented pawl
mechanism assuring positive transfer of load from upper to lower section. Deep mast sections 
for maximum torsional stability. Heavy-duty rigid racking board with side-mounted fingers provided
 with finger safety locks. Load guylines to engine end of carrier.

Trailer - The mechanical drive and electrical drive arrangement of the 750 Series rig are both 
available as trailer type rigs or split rig arrangement. 

Substructure - Choice of T-Type telescoping substructure with derrick base and rig base or 
stacked fixed height substructure with setback cross base and derrick cross base. 15' high structure. 
Either type provides wind guy anchorage eliminating external wind guy anchors.

Hydraulic Power - 35 GPM 2500 psi max. pressure system. Provided by either of two pumps,
 one belt driven from front of each engine.

Power Reserve Line Pool  - On split trailer versions only  of the 750 Series rig, a hydraulic 
powered reserve line spool is provided on the mast trailer.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

--------------------------------------------------------------------------------
Search words(for official use only) -  
Cabot 750 Mobile Carrier Rig for Sale
Used Mobile Drilling Rigs For Sale
American Cabot Drilling Rigs for sale
American Used Land Rigs for sale
Cabot 750 Land Drilling Rig for sale
Used Land Rigs for sale
Used Cabot Mobile Drilling Land Rig
Refurbished Land Rigs For Sale
--------------------------------------------------------------------------------