Search Search Here

Browse equipments
No relevant equipments are found in our database.
Search results
Index No. Status Equipment Name Details

Featured equipments for sale

Generic Longyear 44 Wireline Core Drilling Rig - For Sale
Worldoils Marketplace
Generic Longyear 44 Wireline Core Drilling Rig - For Sale
Worldrigs ID: 453
Generic Longyear 44 Wireline Core Drilling Rig - For Sale

Generic Longyear 44 Wireline Core Drilling Rig for Sale
Generic Longyear 44 Wireline Core Drilling Rig - 1977 Built - For Sale

Model : Longyear 44 Core Drill
Manufacturer : Generic
Year : 1977
Condition : Used

Description :

1977 Longyear 44 Wireline Core Drill
Long mast with overhead platform for running 30 ft. rods
6 Cylinder Listers
Peters Engine
Deutz 2 Cylinder 435 Water Pump
Mounted on a 1977 Ford 700 Truck with 13,152 Miles
Leveling jacks
Has the 2nd cable for deep hole work
Note : Previous operator has been down to 5438' ft. BQ wireline drilling
Lister Peters engine (runs smooth but the shut off solenoid doesn’t 
work so you need to push lever manually to power down) 
Truck tires may need replaced
Note : Other than that, drill is in working order, just needs 
fuel and battery then ready to go back to work right away

Also add to description of each drill a list of items available 
at extra cost :
3000' ft. BQ wireline drill rods
1000' ft. of NQ composite (NQC) drill rods
Bean 435 water pumps
Joy 22 parts
Brake bands for Joy drills and Sprague & Henwood drills
Hydraulic Chuck cylinders for Longyear 44’s
Joy Transmission
BQ core barrels

Also add that seller has following available at extra cost :
142C Sprague & Henwood 24" feed  
3 Cylinder Deutz 912 New Rebuild
2 Bean 20 pumps
Sprague & Henwood 30" feed Acker automatic chuck up to NQ
Gardner Denver water pump
'93 Volvo 13 speed with air brakes has 1000 gallon water tank.
 
Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Used Longyear 44 Wireline Core Drilling Rig for Sale
1977 Built Generic Longyear 44 Wireline Core Drilling Rig for Sale
Generic Longyear 44 Wireline Used Core Drilling Rig for Sale
Generic Longyear 44 Wireline Core Drill Rig for Sale
Longyear 44 Wireline Core Drilling Rig for Sale in USA

-------------------------------------------------------------------------------------------------------

Generic Longyear 44 Core Drilling Rig - For Sale
Worldoils Marketplace
Generic Longyear 44 Core Drilling Rig - For Sale
Worldrigs ID: 2780
Generic Longyear 44 Core Drilling Rig - For Sale

Longyear 44 Core Drilling Rig for Sale
Generic Longyear 44 Core Drill Rig for Sale

Model : Longyear 44 Core Drill
Manufacturer : Generic
Condition : Used

Description :

Longyear 44 Wireline Core Drill
with angle drilling capability
Mounted on a 1993 Freightliner
Hydrualic pump upgraded to variable displacement piston pump.
Bean 435 Water Pump
4-Cylinder Deutz 2011-series Drill Engin
2-Cylinder Deutz 1013-series Water Pump Engine.
3 hydraulic leveling jacks
Single traveling block with approximately 3,000 ft BQ depth 
capability, or can be upgraded with double cables for over 
5,000 ft depth capability
Deutz 1013 diesel engine on deck
In working order, just needs fuel and battery then ready 
to go back to work right away

A list of items available at extra cost :
Joy 22 parts
Brake bands for Joy drills and Sprague & Henwood drills
Hydraulic Chuck cylinders for Longyear 44’s
Joy Transmission
BQ core barrels

Also available at extra cost :
142C Sprague & Henwood 24" feed  
3 Cylinder Deutz 912 New Rebuild
2 Bean 20 pumps
Sprague & Henwood 30" feed Acker automatic chuck up to NQ
Gardner Denver water pump
'93 Volvo 13 speed with air brakes has 1000 gallon water tank.

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Used Generic Longyear 44 Core Drilling Rig for Sale
Generic Longyear 44 Core Used Drilling Rig for Sale
Drilling Rig - Generic Longyear 44 Core - For Sale
Generic Longyear 44 Wireline Core Drilling Rig for Sale
Generic Longyear 44 Core Drill Rig for Sale in USA

-------------------------------------------------------------------------------------------------------

Diedrich Rubber Track Sonic Drilling Rig - For Sale
Worldoils Marketplace
Diedrich Rubber Track Sonic Drilling Rig - For Sale
Worldrigs ID: 344
Diedrich Rubber Track Sonic Drilling Rig - For Sale

Diedrich Rubber Track Sonic Drilling Rig for Sale
Sonic Drilling Rig on Tracks for Sale

Model : Sonic Drill Rig on Tracks
Manufacturer : Diedrich
Year : 2012
Condition : Used

Description :

2012 Diedrich Rubber Track Sonic Rig
Engine : 375hp Volvo Diesel Engine
Dimensions :
Length towered down – 22’ 5”
Length towered up – 21’ 6”
Height towered down – 10’ 9”
Height towered up – 22’ 7”
Width – 8’
Weight – 37,600lbs
Feed System :
Dual single link chain drive
Pull back – 20,000lbs
Pull down – 20,000lbs
Max speed – 102ft./min
Rubber isolation wheels
15ft stroke, with a Gore track hose system
Water Pumps :
L6 Progressive Cavity Moyno Pump
225 PSI
47 GPM
Inlet/Outlet – 3”/ 2-1/2”
Jib Winch :
Extended Position
Capacity – 1700 lbs.
Vertical Position (Over the hole)
Capacity – 3800 lbs.
Breakout Wrenches :
3-1/2” OD Pipe – 11” OD Pipe
Torque
17,500 lbs.
Mast :
12” x 12” structural tubular construction
25,000 lb. gross load rating
6” guide tubes
Leveling Jacks :
Four 36” stroke (2 front and 2 rear)
Other Features :
One 24” tool box
150-gallon fuel tank
200-gallon hydraulic tank
Radio controlled under carriage
Rod trough
Automatic SPT Hammer
10” wiggle and 10” in/out
Tooling available cost extra

Note : The majority of drilling projects the rigs now perform is 
Geotech drilling, Auto-Matic-Trip Hammers were installed on both.

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
2012 Built Diedrich Rubber Track Sonic Drilling Rig for Sale
Diedrich Rubber Track Sonic Drilling Rig - 2012 Built for Sale
Drilling Rig - Diedrich Rubber Track Sonic - For Sale
Used Diedrich Rubber Track Sonic Drilling Rig for Sale
Diedrich Rubber Track Sonic Drilling Rig for Sale in USA 

-------------------------------------------------------------------------------------------------------

Sandvik Cubex 6200 Reverse Circulation Drill Rig - For Sale
Worldoils Marketplace
Sandvik Cubex 6200 Reverse Circulation Drill Rig - For Sale
Worldrigs ID: 3005
Sandvik Cubex 6200 Reverse Circulation Drill Rig - For Sale

Sandvik Cubex 6200 Reverse Circulation Drilling Rig for Sale
Used Sandvik Cubex 6200 Reverse Circulation Drill for Sale

Model : Cubex 6200 Core Drill
Manufacturer : Sandvik
Year : 1999
Condition : Used

Description :

1999 Sandvik Cubex 6200 Reverse Circulation Drill
Set up for mineral exploration applications
Mounted on a track carrier 
The drill is currently wired for 480 volts (It can be run off of both 480 and 
600 with an available transformer that can be installed for 600 volts 
Overhauled in 2019
Set up for RC (Reverse Circulation) drilling
Note : Updated pictures listed here mid-April 2025

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
1999 Built Sandvik Cubex 6200 Reverse Circulation Drill Rig for Sale
Sandvik Cubex 6200 Reverse Circulation Drilling Rig - 1999 Built - For Sale
Sandvik Cubex 6200 Reverse Circulation Used Drilling Rig for Sale
Sandvik Reverse Circulation Drilling Rig for Sale
Sandvik Cubex 6200 Reverse Circulation Drill for Sale in USA

-------------------------------------------------------------------------------------------------------

Doosan XHP750 Air Compressor & Duramast Drill Rig Package - For sale
Worldoils Marketplace
Doosan XHP750 Air Compressor & Duramast Drill Rig Package - For sale
Worldrigs ID: 3054
Doosan XHP750 Air Compressor & Duramast Drill Rig Package - For sale

Doosan XHP750 Air Compressor & Duramast Drill Rig Package
XHP750 Air Compressor & Duramast Drill Rig Package for Sale

Model : XHP750 Air Compressor & Duramast Drill Rig Package
Manufacturer : Doosan
Condition : Used

Description :

Package :
Duramast Skid Steer Mounted Drill Rig
Hydraulic Rotary Top Head Powered by Skid Steer
300 Ft. Of 2-3/8 Mayhew Regular Thread Drill Rods
Towable Rod Trailer Included
(Capable of Drilling 400 Deep with A 5-6" Hammer)
Breakout Wrench
Winch and Rod Lifting Cable
 
2010 Bobcat T320 Track Loader Skid Steer
S/N: A7MP63786
Remote Control
4,653.5 Hours Showing on Meter
 
2008 Doosan/Ingersoll-Rand XHP750Cat / 300 Psi Air Compressor
S/N: 3995T2UCSC44
Caterpillar C9 Diesel Engine
S/N: JSC05489 & Arrangement #244-6783
4,176.1 Hours Showing on Meter
Towable with Pintle Style Hitch

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------
Search words (for official use only) :
Used XHP750 Air Compressor & Duramast Drill Rig Package for Sale
Air Compressor & Duramast Drill Rig Package for Sale
XHP750 Air Compressor & Duramast Used Drill Rig Package for Sale
Doosan Air Compressor & Duramast Drill Rig Package for Sale
XHP750 Air Compressor & Duramast Drill Rig Package for Sale in USA

----------------------------------------------------------------------------------------------

Gus Pech R-15 Brat-A-Sonic Drilling Rig - For Sale
Worldoils Marketplace
Gus Pech R-15 Brat-A-Sonic Drilling Rig - For Sale
Worldrigs ID: 2667
Gus Pech R-15 Brat-A-Sonic Drilling Rig - For Sale

Gus Pech R-15 Brat-A-Sonic Drilling Rig for Sale
Drilling Rig - Gus Pech R-15 Brat-A-Sonic - For Sale

Model : R-15 Brat-A-Sonic Drill Rig
Manufacturer : Gus Pech
Year : 2006
Condition : Used

Description :

2006 Gus Pech R-15 Brat-A-Sonic Drill Rig
Mileage – 11,956 
Hours – 11,830
Serial# 105GP133WDC24CXY506
GP# 24-400RS
Note : 8' x 8' ft deck that folds down when running the rig. 
Rod holder on the side of the rig that holds 20' ft rods or casing
Mounted on a 2006 M2 Freightliner 6x4 Truck
Diesel Engine : MBE4000-450 12.8L rated 450hp - SN: 460.933U0837213
Transmission : Eaton 16 speed manual with Chelsea HD PTO
Front and rear ABS air brake system
20,000# Front Axle, 46,000# 2 stage Tuftrac rear axle with 
Pusher axle @ 13,200# capacity
Note : All the Gus Pech specifications and detailed descriptions 
are viewable in the pictures on the spec sheets.
Note : The demand for sonic drilling in the industry to drill 
mostly environmental projects ranging from deep borings 
(300’ – 600’) with discreet water sampling, installation 
of CMT wells, monitoring wells ranging from 2” – 6” at 
depths reaching 500’ ft. The rig is also capable and has 
been used on projects where 30 – 45 - degree angle wells 
were installed.
Tooling & Sonic Heads available (cost extra) : 
About 450’ of 10-3/4” x 10’ H90 Sonic Casing (270’ ft never used), 
several H90 drive heads for 5-7/8”, 7-5/8”, 8-5/8”, 9-5/8” and 
10-3/4” casing sizes. Overshots and taps for all sizes, core bits, 
casing shoes and some core barrels. We can sell this lot separately 
or include it in a package deal. 
We can offer 3 complete Dietrich sonic heads and parts and pieces 
to assemble maybe 2 more sonic heads (each head cost extra). 

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
2006 Built Gus Pech R-15 Brat-A-Sonic Drilling Rig for Sale
Gus Pech R-15 Brat-A-Sonic Drilling Rig - 2006 Built for Sale
Used Gus Pech R-15 Brat-A-Sonic Drilling Rig for Sale
Gus Pech R-15 Brat-A-Sonic Used Drilling Rig for Sale
Gus Pech R-15 Brat-A-Sonic Drilling Rig for Sale in USA

-------------------------------------------------------------------------------------------------------

Generic Top Head Drive Drilling Rig - For Sale
Worldoils Marketplace
Generic Top Head Drive Drilling Rig - For Sale
Worldrigs ID: 1027
Generic Top Head Drive Drilling Rig - For Sale

Generic Top Head Drive Drilling Rig for Sale
Generic Top Head Drive Drilling Rig - 1985 Built for Sale

Model : Top Head Drive Drill Rig
Manufacturer : Generic
Year : 1985
Condition : Used

Description :

1985 Custom Built Top Head Drive Drill Rig
Mounted On A 1997 Ford Louisville Tandem Axle Truck
Powered By CAT 3306 Diesel Engine
Hydraulic Leveling Jacks & No Carousel
Equipped with & set up for air & mud rotary 
(can connect a portable air compressor)
Mission Magnum Mud Pump
Mud Slayer M250
Includes 32 Drill Pipes (3-1/2" X 20ft)
All Controls Work Well (per the seller)
Minor Hydraulic Leaks Present

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
1985 Built Generic Top Head Drive Drilling Rig for Sale
Used Generic Top Head Drive Drilling Rig for Sale
Drilling Rig - Generic Top Head Drive - For Sale
Generic Top Head Drive Used Drilling Rig for Sale
Generic Top Head Drive Drilling Rig for Sale in USA

-------------------------------------------------------------------------------------------------------

Klemm 702-2 Micropile Crawler Drill - For Sale
Worldoils Marketplace
Klemm 702-2 Micropile Crawler Drill - For Sale
Worldrigs ID: 3053
Klemm 702-2 Micropile Crawler Drill - For Sale

Klemm 702-2 Micropile Crawler Drill for Sale
2009 Built Micropile Crawler Drill for Sale

Model : 702-2 Micropile Crawler Drill
Manufacturer : Klemm
Year : 2009
Condition : Used

Description :

2009 Klemm 702-2 Micropile Crawler Drill
Limited access micropile drill
This is a very nice compact drill capable of installing high-capacity 
micropiles in very limited access settings
The Unit starts and runs, all functions working
Has a detachable power pack
Deutz TCD 2012 L04 2V 4 Cylinder 127 hp 4.038 L Diesel Engine
2370 mm Mast
Can work in very low headroom areas while still delivering power 
enough to go 100’ ft+ in depth with up to 9″ piles
Power pack is umbilical, so drill can work inside, while the 
power is supplied out away from the operation
This machine also has a water Injection System, and 8 in Double Grouser Tracks
Meter reads : 6,502+ Hours

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Used Klemm 702-2 Micropile Crawler Drill for Sale
Klemm 702-2 Micropile Crawler Drill - 2009 Built for Sale
702-2 Micropile Crawler Drill for Sale
Klemm 702-2 Micropile Crawler Used Drill for Sale
Klemm 702-2 Micropile Crawler Drill for Sale in USA

-------------------------------------------------------------------------------------------------------

Schramm T660 Drilling Rig - For Sale
Worldoils Marketplace
Schramm T660 Drilling Rig - For Sale
Worldrigs ID: 658
Schramm T660 Drilling Rig - For Sale

Schramm T660 Drilling Rig for Sale
Drilling Rig - Schramm T660 Rotadrill - For Sale

Model : T660 Drill Rig
Manufacturer : Schramm
Year : 1986
Condition : Used

Description :

1986 T660 Rotadrill Rig :
GHH 750 cfm / 250 psi Air Compressor
Detroit 8V92 Diesel Deck Engine
Cat Water Injection System
Set Up as Top Head Air Rotary Drill Rig
Carousel System
Hammer Oilier
4,131 Hours on Rig

Includes Drill Pipe :
7 Pieces of Carousel Drill Pipe
4-1/2” Drill Pipe
220' Ft Bottle Neck
80' Ft Flush Joint

Winch :
44,000 Lbs Pullback

Hydraulic and Mechanical Upgrades :
Almost All New Hydraulic Hoses and Kelly Hose (2024)
New Heads, Radiator, Water Pump, Starter, Turbo, Alternator (2024)
All New Wiring for Deck Engine (2024)
All New Tires (2024)
Rebuilt Both Pullback Cylinders (2025)
Digital Engine Management System Added (2024)
Table Bushing Included Set Up to Drill

Mounted on Brigadier Truck :
Powered By Caterpillar 3208 Diesel Engine
13-Speed Transmission
41,546 Miles on Truck

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
1986 Built Schramm T660 Drilling Rig for Sale
Schramm T660 Rotadrill Drilling Rig for Sale
Schramm T660 Rotadrill - 1986 Built - For Sale
Used Schramm T660 Drilling Rig for Sale
Schramm T660 Drilling Rig for Sale in USA

-------------------------------------------------------------------------------------------------------

Sandvik T1000 Drilling Rig - For Sale
Worldoils Marketplace
Sandvik T1000 Drilling Rig - For Sale
Worldrigs ID: 3052
Sandvik T1000 Drilling Rig - For Sale

Sandvik T1000 Drilling Rig for Sale
2007 Built Sandvik T1000 Drilling Rig for Sale

Model : T1000 Drill Rig - Water Well
Manufacturer : Sandvik
Year : 2007
Condition : Used

Description :

2007 Sandvik T1000 Drill Rig  

Note : Converted to a water well drill rig 
(repairs & services completed and ready to go to work on projects) 

Deck Engine : CAT C-15 Diesel - Rated 540 HP @ 1,800 RPM (Rebuilt May 2025)
Air Compressor : Sullair 1,000 cfm / 350 psi
Carousel : Handles 4" Drill Pipe, Includes 3 Pipe (20ft Ft X 4")
Cooling System : AKG Cooler, 48” 8-Blade Fan @ 1,100 RPM
Water Injection Pump : GPM Bean System
Rod Winch : 1 Unit

Drilling Capabilities & Features : 
Angle Drilling : 0 To 25 Degrees
Stability : 4 Leveling Jacks
Pump Drive : Funk 28000 Series Type 3, Ratio 0.91:1
Hammer Lubricator

Converted to Water Well Drilling at EWD : 
Installed : Includes all the repairs & services completed
Operators Step and Stand for Control Panel
Pipe Trough, Jib Boom, Rod Handling Winch, Etc.

Dimensions & Weight :
Length : 37 Ft
Width : 8 Ft 6" In
Height : 13 Ft 2" In

Truck Mount - 2006 Sterling LT9500
Vin : 2FZHAZCV77AX19517
Transmission : 8LL
Engine : 
Mercedes-Benz Diesel MBE4000-370
12.8l, 370 Hp @ 1,900 RPM
2,000 Governed Rpm
1,450 Lb.-Ft @ 1,100 RPM
Tires :
Front : 425/65R 22.5, Tubeless Radial
Rear : 11R 22.5, Tubeless Radial
Dimensions & Weight :
Length : 37 Ft
Width : 8 Ft 6 In
Height : 13 Ft 2 In

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Sandvik T1000 Drilling Rig - 2007 Built - For Sale
Drilling Rig - Sandvik T1000 - For Sale
Used Sandvik T1000 Drilling Rig for Sale
Sandvik T1000 Used Land Drilling Rig for Sale
Sandvik T1000 Drilling Rig for Sale in USA

---------------------------------------------------------------------------------------------------------

Reichdrill T690 Drilling Rig - For Sale
Worldoils Marketplace
Reichdrill T690 Drilling Rig - For Sale
Worldrigs ID: 1422
Reichdrill T690 Drilling Rig - For Sale
Reichdrill T690 Drilling Rig for Sale
Drilling Rig - Reichdrill T690 - For Sale


Model : T690 Drill Rig
Manufacturer : Reichdrill
Year : 1998
Condition : Used

Description :


1998 Reichdrill T690 Drill Rig

Deck Engine :

CAT 3406B Diesel Engine Rated at 500 HP
Rebuilt 4-1-19 (1,900 Hours Since Rebuild)
New Starter and New Batteries

Compressor System :

GHH 1100 CFM / 350 PSI Air Compressor (Installed 2017)
New Cooler (0 Hours)
New Separator Filter (10 Hours)
New Hercules Controls and Butterfly Valve

Drill Features :

6-Rod Carousel
Water Injection Pump
40,000 Lbs. of Pullback
High Torque Head and Power Motors
Table swings out
Pipe Rack Holds 300 Ft Of 4-1/2" X 20ft Drill Pipe With 3-1/2" REG Connection
Hydraulic Leveling Jacks

Maintenance & Upgrades :

All Hydraulic Cylinders Rebuilt (Except Jacks)
All Controls Rebuilt
85% of Hydraulic Hoses Replaced
Air Lines Replaced
Filtered And Regulated Auxiliary Air Off Rig Compressor 
(For Diaphragm Pump, Air Cylinder, Etc.)
Top Head Resealed
 
Mounted on Mack Truck :

Mack Diesel Engine Rated at 350 HP
New Transmission and Clutch (Installed In 2020)

Tires :

8 New Drive Tires (Less Than 300 Miles)
Steer Tires Have 3,000 Miles

Additional Truck Upgrades :

New windshields
New batteries
Driver side seat replaced
Power steering hoses replaced

Location : USA 

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
1998 Built Reichdrill T690 Drilling Rig for Sale
Reichdrill T690 Drilling Rig - 1998 Built for Sale
Used Reichdrill T690 Drilling Rig for Sale
Reichdrill T690 Used Land Drilling Rig for Sale
Reichdrill T690 Drilling Rig for Sale in USA

-------------------------------------------------------------------------------------------------------
Chicago Pneumatic T-672W Rotary Drilling Rig - For Sale
Worldoils Marketplace
Chicago Pneumatic T-672W Rotary Drilling Rig - For Sale
Worldrigs ID: 2630
Chicago Pneumatic T-672W Rotary Drilling Rig - For Sale
Chicago Pneumatic T-672W Rotary Drilling Rig for Sale
Drilling Rig - Chicago Pneumatic T-672W - For Sale


Model : T672W Drill Rig
Manufacturer : Chicago Pneumatic
Condition : Used

Description :


Chicago Pneumatic T-672W Rotary Drill Rig
Set up for Water Well Drilling

Featuring :

High-Pressure Air Compressor as Standard Equipment
(600 CFM at 250 PSI)
Hydraulic Top-Drive Rotation
Hydraulic-Powered Stem Loader
Side-Mounted Stem Carrier
All-Hydraulic Control

Hydraulic Top-Drive and Variable Speed Control :

Provides Exact Matching of Rotation Speed and Feed Pressure
for Any Formation
Top-Drive Transmits Power and Rotation Directly to The Drill Stem 
with No Power Loss.

Hydraulic-Powered Stem Loader :

Attached To the Mast
Carries Six 20-Foot Stem Lengths in a Rotating Swivel Rack,
Similar In Operation to The Cylinder of a Revolver-Press the Lever
A Stem Length Swings into the Mast for Precise Make-Up.

Side-Mounted Stem Rack :

Fits Flush Against Side of Rig for Compactness
Enough Extra Stem to Sink Wells to Depths of Three Hundred Feet.

Heavy-Duty Structural-Steel Mast :

Supports And Guides Top-Drive Head and Drill String
Adds Weight for Increased Down Pressure
Straighter Holes
Quickly Raised or Lowered by Fast-Acting Hydraulic

Hydraulic Winch and Jib Boom :

Move Stem from the Side-Mounted Carrier
Refill The Automatic Barrel Loader
Helpful For Maneuvering Lengths of Casing and Other Heavy Drilling Equipment.

Hydraulic Leveling Jacks :

Three Hydraulic Jacks (One at The Front and Two at The Rear)
Quickly Level Entire Rig
Supply Extra Rigidity
Firmly Lock Rig in Place for Maximum Effective Use of Rig 
Weight for Down-Pressure.

Compact Control Console :

Positioned To Provide Operator with Complete Control of The Rig-All Drilling 
Operations Are Within Sight
All Controls Are at Operators Fingertips.

Rated Capacity :

7â…ž" Diameter Rotary
6¾" Down-The-Hole
Note :
By Using Reamers And Optional Circulation Equipment, Hole Diameters 
Up To 30" Have Been Drilled

Standard Mounting :

International Harvester Truck Model M-623
211" Wheelbase
38,000-Pound Tandem,
15,000•Pound Front Axle, 149" CA
12:00 X 20 Rubber

Pulldown :

Rated 30,000-Pound Down Pressure, 37,000-Pound Hoist
Feed Rate : 4 FPM
Retract Rate : 60 FPM
Stroke : 28 Feet For 20ft Stem Change

Rotary Head :

Zero To 86 RPM @ 36,000 Inch-Pounds Torque

Power :

Deisel : Caterpillar Model D:343A-T Turbocharged Industrial Engine
Rated 300 BHP @ 1800 RPM

Air Compressor :

Two-Stage, Oil-Flooded Screw
600 CFM @ 250 PSI

Dust Control :

Water Injection (Opt.)

Leveling Jacks :

Two Rear : 4" Bore X 24" Stroke
One Front : 4" Bore X 36" Stroke

Stem Handling :

Hydraulic Loader
Capacity : Six Lengths Of 20ft Stem
4,000-Pound Winch
Jib Loader
Stationary Pipe Rack for Nine Lengths Of 4½" X 20ft Pipe
Hydraulic Breakout

Standard Drill Stem :

4½" Diameter x 20ft x 3½ API

Annular Velocity :

With 4½" Stem and 6½4" Hole: 600 CFM Air—5580 FPM

Weight :

Bare Machine with Standard Equipment :
Front Axle : 14,300 Pounds
Rear Axle : 31,500 Pounds
45,800 Pounds
Machine Loaded With 300 Feet Of 4½" Stem, Water Injection, Winch And Jib, Tools, Etc.
Front Axle : 15,500 Pounds
Rear Axle : 37,700 Pounds
53,200 Pounds

Dimensions :

Length Mast Up : 32ft 0”
Length Mast Down : 35ft 4”
Height Mast Up : 37ft 1½”
Height Mast Down : 12ft 1 ½”
Width : 8ft 3½"

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Used Chicago Pneumatic T-672W Rotary Drilling Rig for Sale
Chicago Pneumatic Drilling Rig for Sale
Chicago Pneumatic T-672W Rotary Used Drilling Rig for Sale
Used Chicago Pneumatic T-672W Drilling Rig for Sale
Chicago Pneumatic T-672W Rotary Drilling Rig for Sale in USA

-------------------------------------------------------------------------------------------------------
Atlas Copco T3W Drilling Rig - For Sale
Worldoils Marketplace
Atlas Copco T3W Drilling Rig - For Sale
Worldrigs ID: 1424
Atlas Copco T3W Drilling Rig - For Sale
Atlas Copco T3W Drilling Rig for Sale
Atlas Copco T3W Drilling Rig - 2009 Built for Sale


Model : T3W Drill Rig - 40K pullback
Manufacturer : Atlas Copco
Year : 2009
Condition : Used

Description :


2009 Atlas Copco T3W Drill Rig 
Caterpillar C15 Diesel Deck Engine

Engine Serial Number : JRE 01086
Rebuilt : February 24th

1070 cfm / 350 psi Air Compressor

Serial Number : 11999U24CQ
New : April 2024
New Compressor Cooler – Installed June 2024
Pull Back Force – 40,000 LBS
In-N-Out Box – For Compressor Disconnect
Single Rod Loader
New Cables – Installed 2023
Swivel Rebuild – October 2024
Fan Motor and Pump – Recently rebuilt
Drill Pipe – 780 ft of (4½" x 20ft)

Mounted on International Work Horse 7600 Truck

VIN : 1HTWYSBTX9J090449
Caterpillar C13 Diesel Engine
Engine Brake
Full Lockers
Transmission : 8LL
Good Tires & Hydraulic Leveling Jacks
Brake Cans, Brake Pads, and Brake Drums replaced in 2025

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
2009 Built Atlas Copco T3W Drilling Rig for Sale
Used Atlas Copco T3W Drilling Rig for Sale
Drilling Rig - Atlas Copco T3W - For Sale
Atlas Copco T3W Used Drilling Rig for Sale
Atlas Copco T3W Drilling Rig for Sale in USA 

-------------------------------------------------------------------------------------------------------
Ingersoll-Rand T3W Drilling Rig - For Sale
Worldoils Marketplace
Ingersoll-Rand T3W Drilling Rig - For Sale
Worldrigs ID: 2504
Ingersoll-Rand T3W Drilling Rig - For Sale
Ingersoll-Rand T3W Drilling Rig for Sale
Drilling Rig - Ingersoll-Rand T3W - For Sale


Model : T3W Drill Rig
Manufacturer : Ingersoll-Rand
Year : 1993
Condition : Used

Description :


1993 Ingersoll-Rand T3W Drill Rig
IR 900 cfm / 350 psi Air Compressor – Rebuilt in 2006
15,000 hours on rig
6" DTH Hammer

Rig Updates:

CAT 3406C Diesel Deck Engine Replaced in 2019
Funk Box Rebuilt in 2022
New Rotation and Head Motors Installed in 2022
New Feed Pump in 2022
Triplex Pump Rebuilt in 2022
20 GPM 4-Piston Beam Pump Recently Rebuilt

Chassis Details:

Mounted on a Ford L8000 Truck 
Cummins 8.3 Diesel Engine
Comes with 200 Ft of 3-1/2" O.D. x 20ft Drill Rods with 2-3/8" IF Threads

Location : USA 

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Ingersoll-Rand T3W Drilling Rig - 1993 Built for Sale
1993 Built Ingersoll-Rand T3W Drilling Rig for Sale
Used Ingersoll-Rand T3W Drilling Rig for Sale
Ingersoll-Rand T3W Used Land Drilling Rig for Sale
Ingersoll-Rand T3W Drilling Rig for Sale in USA

-------------------------------------------------------------------------------------------------------

1500HP Drilling Rig for Sale
Worldoils Marketplace
1500HP Drilling Rig for Sale
Worldrigs ID: 3049
1500HP Drilling Rig for Sale
2012 Built 1500HP Drilling Rig for Sale
1500HP ZDPE JC-50D Drilling Rig for Sale

Description :


Hoisting, Rotating & Pipe-Handling Equip :

Drawworks : ZDPE JC-50D (1500HP) driven by (2) Yonge YZ08 (1,000) motors 
Auxiliary Brake : Eaton Airflex 336 WCB 48” Hydromatic brake 
Hoisting Capacity : 700,000LB SHL 1 3/8” Line
 Rotary Table : Lanzhou ZP-275 271/2" Chain Driven 
Traveling Block : Lanzhou YC315 350 Ton – 1 3/8", 350T raising becket 
Top Drive : Swivel included, Tesco 500Ton for additional cost*** 
Iron Roughneck : Varco ST80 available for added cost*** 
Hydraulic Catwalk : 
4’7”’W x 35’6” L x 42” H slingshot style included. 
> Forum available for added cost*** 
Pipe Handling : Access Oil Tools Rotating Mouse Hole

Power Package :

Engines : TBD 
Diesel : 18,000 gal 
Bl-Fuel : On Request 
Generators : (3) Kato 1365kw 
SCR System : 3x4 Omron W/ Allen Bradley controls

BOP Equipment :

Annular : Horn H25 11” 5000PSI 
Single Ram : Horn 11” 5000PSI 
Double Ram : Horn 11” 5000PSI ( BOP trolly w/winches for stack) 
Accumulator : 
TFI-6 station/ 168 Gallon, 20HP triplex, air jammers, 
(20) 11-Gal bottles/ remote closing control unit 
Choke Manifold : Horn 4” 10,000 psi

Tubulars :

Drill Pipe : On request 
Drill Collars : On request

Mast & Substructure :

Mast 

Type : Ideal 142ft ZDPE Cantilever 
Hookload : 700,000 # SHL on 12 lines 
Racking Capacity : 25,000ft 5"
Substructure

Type : IDEAL Box on Box API4G 2012 
Clear Height : 27ft 
Load Ratings :
Rig Walking System : Lee C Moore Pad Walking system 
Pad Capacity :

Mud System :

Mud Pumps : TBD 
Fluid Ends/ Delivery System : 5,000# WP PSI Fluid Ends and Delivery System 
Charging Pumps : (2) Cobra 8x6x14 75HP 
Process PIT : 1 x ( 550 bbl) Three-Compartment w/ (4) Agitators
Suction Pit : 1 X(600 bbl) Three-Compartment w/ (4) Agitators
Trip Tank : 120BBL One-Compartment w/ 10HP Agitator 
Trip Tank Pump : 4x3x13 100HP 
Shale Shakers : (2) Derrick Dual Super “G” FLC504 
Degasser : Derrick 
Desander : Derrick 3-10ft Cones 
Desander Pump : 6 x 8 Centrigugal 100HP 
Desilter : NOV Brandt 20-4" Cones
Desilter Pump : 6 x 8 Centrigugal 100HP 
Mud Mixing Pumps : 6 x 8 x 14 100HP 
Drilling Water : (2) 400 bbl water tanks

Transport :

Estimated Loads : Appx 50 Loads 

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Drilling Rig - 1500HP ZDPE JC-50D - For Sale
ZDPE JC-50D Drilling Rig - 2012 Built for Sale
ZDPE JC-50D Drilling Rig for Sale
Used ZDPE JC-50D Drilling Rig for Sale
1500HP Drilling Rig for Sale

-------------------------------------------------------------------------------------------------------
1400HP Oilwell 840E Drilling Rig - For Sale
Worldoils Marketplace
1400HP Oilwell 840E Drilling Rig - For Sale
Worldrigs ID: 3048
1400HP Oilwell 840E Drilling Rig - For Sale
1400HP Drilling Rig for Sale
1400HP Oilwell 840E Drilling Rig for Sale


Description :


Hoisting, Rotating & Pipe-Handling Equip :

Drawworks : 
Oilwell 840E powered by (2) 1000HP Amerimax traction motors w/10hp blowers (1400HP) 
Auxiliary Brake : Elmagco 8350 Eddy Current 
Hoisting Capacity : 700,000LB SHL 1 3/8” Line 
Rotary Table : Oilwell A275 271/2" powered by 1000HP Amerimax motor 
Traveling Block : 500 Ton Oilwell 
Top Drive : National P500 Swivel included, Tesco 500Ton for additional cost*** 
Iron Roughneck : Varco ST80 available for added cost*** 
Hydraulic Catwalk : Slingshot style included 
Pipe Handling : Rotating Mouse Hole

Power Package :

Engines : (3) Detroit MTU 4000 2011 year model 
Diesel : 18,000 gal 
Bl-Fuel : On Request 
Generators : (3) MTU 1225KW 
SCR System : Ross Hill 1400 3 x 4

BOP Equipment :

Annular : Horn H25 11” 5000PSI 
Single Ram : Horn 11” 5000PSI 
Double Ram : Horn 11” 5000PSI ( hydraulic bop handler for stack) 
Accumulator : Koomey 8 station, Type 80, 18 bottles 
Choke Manifold : Horn 4” 10,000 psi 
Mud/Gas Separator : 60” Dia x 20ft H Vertical skidded Degasser

Tubulars :

Drill Pipe : On request 
Drill Collars : On request

Mast & Substructure :

Mast 

Type : Pyramid 142ft 
Hookload : 1,250,000Lb SHL 6 x 60” sheves 1 3/8” 63” Fast line 
Racking Capacity : 25,000ft 5"
Substructure

Type : Pyramid Box on Box 48ft x 31ft x 28ft
Clear Height : 30ft
Load Ratings :
Rig Walking System :
Pad Capacity :

Mud System :

Mud Pumps : TBD 
Fluid Ends/ Delivery System : 5,000# WP PSI Fluid Ends and Delivery System 
Charging Pumps : (2) Cobra 8x6x14 50HP 
Process PIT : 1 x ( 200 bbl) Three-Compartment w/ (4) Agitators
Suction PIT : 1 X(600 bbl) Three-Compartment w/ (3) Agitators
Trip Tank : 85BBL One-Compartment w/ 10HP Agitator 
Trip Tank Pump : 4x3x13 100HP 
Shale Shakers : (2) Derrick Dual Super “G” 
Degasser : Derrick 
Desander : Derrick 2-10ft Cones 
Desander Pump : 6 x 8 Centrigugal 100HP
 Desilter : 18 Cone Brandt NOV 
Desilter Pump : 6 x 8 Centrigugal 100HP 
Mud Mixing Pumps : 6 x 8 x 14 100HP 
Drilling Water : (2) 400 bbl water tanks

Transport :

Estimated Loads : Appx 50 Loads 

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Drilling Rig - 1400HP for Sale
Oilwell 840E Drilling Rig for Sale
1400HP Oilwell Land Drilling Rig for Sale
Land Drilling Rig - 1400HP for Sale
Oilwell Land Drilling Rig for Sale

-------------------------------------------------------------------------------------------------------
Reichdrill T650 Drillling Rig - For Sale
Worldoils Marketplace
Reichdrill T650 Drillling Rig - For Sale
Worldrigs ID: 83
Reichdrill T650 Drillling Rig - For Sale

Reichdrill T650 Drillling Rig for Sale
Reichdrill T650 Drillling Rig - 1985 Built for Sale

Model : T650 Drill Rig
Manufacturer : Reichdrill
Year : 1985
Condition : Used

Description :

1985 Reichdrill T650 Drilll Rig
Detroit Silver 8V92TA Diesel Deck Engine (new in 2012)
Sullair 840 cfm / 350 psi air compressor
Sliding angle mast / tower – set up for mineral exploration and allows 
tracking at angle without additional boom. 
Note : One new drill quill sub remove the side inlet swivel, it actually 
set up to switch easily to do water wells
Retractable 4” Bull hose Reel
Bean water injection pump
50,000 lbs of pullback
Cyclone - 800 ft of Matrix 4.5” drill rods (cost extra)
Mounted on a Ford 9000 Truck
Detroit 8V92 diesel engine
13 speed transmission
Jake brakes
Note : There were about 5 drills built using the T4 control panel

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


--------------------------------------------------------------------------------------------------------------------------------
Search words (for official use only) :
1985 Built Reichdrill T650 Drillling Rig for Sale
Used Reichdrill T650 Drillling Rig for Sale
Drillling Rig - Reichdrill T650 - For Sale
Reichdrill T650 Used Land Drillling Rig for Sale
Reichdrill T650 Drillling Rig for Sale in USA

-----------------------------------------------------------------------------------------------------------------------------------

 

Gus Pech GP-1300 Brat Series Drilling Rig - For Sale
Worldoils Marketplace
Gus Pech GP-1300 Brat Series Drilling Rig - For Sale
Worldrigs ID: 2777
Gus Pech GP-1300 Brat Series Drilling Rig - For Sale
Gus Pech GP-1300 Brat Series Drilling Rig for Sale
Drilling Rig - Gus Pech GP-1300 Brat Series - For Sale


Model : GP-1300 Brat Series Drill Rig
Manufacturer : Gus Pech
Year : 2003
Condition : Used

Description :

Gus Pech GP-1300 Brat Series Drill Rig
Single Owner Unit and Delivered in 2003
Mounted On 2003 Sterling Truck 6x4
Cat Diesel Engine – PTO Driven
Rig Has 18,200 Hours
New Engine At 12,900 Hours – (5,300 Hours On Engine)
12" Tube Style Mast
Two-Way Cross Top Head Slide
Planetary Top Head Drive
Gp-1300 Hydrostatic Top Head Drive 0-65 Rpm@ 13,000 Ft Lbs., 
0-145 Rpm@ 5.828 Ft Lbs. Torque 24ft Stroke, Cable, Hydraulic Cylinder 
Actuated Pulldown/Retract Drill System (Pulldown 18,412 Lbs./Retract: 24,537 Lbs.)
Bypass Circuit For Rapid Pulldown/Retract System
Pulldown/Holdback Feed Control System
Two Speed Retract
Dual Hydraulic Pump Drive System With Enlarged Gear Pumps For Increased Speed
Oil Cooling System
Standard Lighting (2)
Tower Tool Carrier For Transportation
4 Point Outriggers : 5ftx36"X3* Front Behind Cab Hosed Together 
With One Control And 5"X30"X3" Rear
Operator Controls Including Tachometer, Key Ignition Switch, 
And Gauges Pertinent To The Operation Of The Drill
Angle Drilling Lower Tower Supports
Operator Foot Stand
Hydraulic Slide Base
Hydraulic Lowering Brat E Style Foot Guide With Hydraulic Too! 
Clamp (Enlarged To Handle 8-1/4" Id Augers)
Hydraulic Swing Around Jib With Hydraulic Extension
2.000# (First Layer) Gp Winch, With Large Dia. Drum, W/Headache Ball,
1/4" X 150ft Cable With Swivel Rook, on Jib
12.000# (First Layer) Pullmaster Winch with Rapid Reverse
1/2ft X 200ft Cable With Swive! Hook
Diedrich Sample Hammer System
Stationary Drill Rod Rack (10ft) With Hammer Holder For Nwj (150ft - 30 Rods)
Special 5ft Rod Rack Under 10ft Rod Rack For 20 AWJ Rods
Swing Around Auger Racks (2) Under Both Sides of Rig
Swing Around Auger Rack, Rear Mounted As Per Basil Rig
2-1/2" U-Joint Attachment With 2" Adapter
2 Sets Auger Guide Bushing (8-1/4" Id.)
Cotta Heavy Duty Transfer Case System

Location : North America

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
2003 Built Gus Pech GP-1300 Brat Series Drilling Rig for Sale
Gus Pech GP-1300 Brat Series Drilling Rig - 2003 Built for Sale
Used Gus Pech GP-1300 Brat Series Drilling Rig for Sale
Gus Pech GP-1300 Brat Series Used Drilling Rig for Sale
Gus Pech Drilling Rig for Sale in North America

-------------------------------------------------------------------------------------------------------
Mobile B-57 Drilling Rig - For Sale
Worldoils Marketplace
Mobile B-57 Drilling Rig - For Sale
Worldrigs ID: 1414
Mobile B-57 Drilling Rig - For Sale
Mobile B-57 Drilling Rig for Sale
Drilling Rig - Mobile B-57 for Sale


Model : B-57 Drill Rig
Manufacturer : Mobile
Condition : Used

Description :


Mobile B-57 Drill Rig - S/N: 90073
Mounted on A 1990 Ford F-800 Truck -  VIN#: 1FDXK84A5LVA35033
Diesel Engine With 150,000 Miles
Set Up for Auger & Soil Sample Drilling
Tooling Included :

110 Ft of Mobile 10” Auger 6-5/8" ID
110 Ft CME 8” Auger 3-3/4" ID
Hand Tooling and Wrenches
1-1/2", 2" And 2.5" Samplers
Note :
Spindle Bearings and Kelly Bar Bearings Have Been Replaced
With CME Bearings Recently
Tires Are New
Flywheel on Rig Motor Has Been Replaced
Rotary Chain is Fairly New

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Used Mobile B-57 Drilling Rig for Sale
Mobile Drilling Rig for Sale
Mobile B-57 Used Land Drilling Rig for Sale
Mobile B-57 Drilling Rig for Sale in USA
Mobile Land Drilling Rig for Sale in USA

-------------------------------------------------------------------------------------------------------
Ingersoll-Rand T4W LT Long Tower Drilling Rig - For Sale
Worldoils Marketplace
Ingersoll-Rand T4W LT Long Tower Drilling Rig - For Sale
Worldrigs ID: 84
Ingersoll-Rand T4W LT Long Tower Drilling Rig - For Sale

Ingersoll-Rand T4W LT Long Tower Drilling Rig for Sale
Ingersoll-Rand T4W LT Long Tower Drilling Rig - 1987 Built


Model : T4W LT Long Tower Drill Rig
Manufacturer : Ingersoll-Rand
Year : 1987
Condition : Used

Description :

1987 Ingersoll-Rand T4W LT Long Tower Drill Rig
Cummins KT19 Diesel Deck Engine
IR HR2 900 cfm / 350 psi Air Compressor - SN: 83432U07S2
One Main P7 Hydraulic Pump
Keystone Hammer Lubricator
Cat 2520 Water Injection Pump
Rotary Head Rebuilt (we will install)
Hydraulic Leveling Jacks
Mounted on a Hendrickson Carrier Truck - VIN#: 11HCD6480GLZ16600
RTO-6613 Transmission
Detroit 671 In Line Diesel Engine
10:00-20 Tires

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


--------------------------------------------------------------------------------------------------------------------------------------
Search words (for official use only) :
1987 Built Ingersoll-Rand T4W LT Long Tower Drilling Rig for Sale
Used Ingersoll-Rand T4W LT Long Tower Drilling Rig for Sale
Drilling Rig - Ingersoll-Rand T4W LT Long Tower for Sale
Ingersoll-Rand T4W LT Long Tower Used Land Drilling Rig for Sale
Ingersoll-Rand T4W LT Long Tower Drilling Rig for Sale in USA

------------------------------------------------------------------------------------------------------------------------------------------

Reichdrill T650 Drilling Rig - For Sale
Worldoils Marketplace
Reichdrill T650 Drilling Rig - For Sale
Worldrigs ID: 2570
Reichdrill T650 Drilling Rig - For Sale
Reichdrill T650 Drilling Rig for Sale
Drilling Rig - Reichdrill T650 - For Sale


Model : T650 Drill Rig
Manufacturer : Reichdrill
Year : 1995
Condition : Used

Description :


1995 Reichdrill T650 Drill Rig
GHH 900 cfm / 350 psi Air Compressor
CAT 3406 Diesel Deck Engine
Carousel Included (Not Currently Mounted)
Holte Casing Hammer
Mounted On Ford Truck (estimated 60,000 miles)
Cummins Diesel Engine (around 2,500 miles)
180 ft. of CP 4-1/2” OD X 3-1/2” Reg. X 20ft Drill Pipe
Rod Box
Hammer Oiler
4 Extra Boxes of Chain
Rig is Running Ever Day

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
1995 Built Reichdrill T650 Drilling Rig for Sale
Reichdrill T650 Drilling Rig - 1995 Built - For Sale
Used Reichdrill T650 Drilling Rig for Sale
Reichdrill T650 Used Land Drilling Rig for Sale
Reichdrill T650 Drilling Rig for Sale in USA

-------------------------------------------------------------------------------------------------------
DR 200 Drilling Rig - For Sale
Worldoils Marketplace
DR 200 Drilling Rig - For Sale
Worldrigs ID: 3025
DR 200 Drilling Rig - For Sale
DR 200 Drilling Rig for Sale
Drilling Rig - DR 200 - For Sale


Model : DR 200 Drill Rig
Manufacturer : DeepRock
Condition : Used

Description :


DeepRock DR 200 Drill Rig  
Rated For 200 ft
Kohler 16 Hp Engine
Mounted on a Trailer
Set Up For Environmental Drilling in Low Clearance Areas
Runs 5 ft drill rods
Notes:
The table slip is sized for 1.5" and we do not know the thread.
It looks to him to be a IF type thread @ 1-1/4" fluid course.
Tool string wise he would suggest re-tooling through Deep Rock.
He has a few random tools for it.

DR Model 20

Applications :

The DR 20 and DR 20-2 are designed for small diameter shallow holes
in unconsolidated formations using the rotary mud method. Rotary air
drilling can be accomplished utilizing an auxiliary air compressor.
The DR 20 and DR 20-2 are designed for fast drilling, utilizing
lightweight drill stem and the DeepRock wrenchless automatic breakout
system.

Capabilities :

2* and 4* wells to 200ft. Larger diameter wells to shallower depths.
For the larger diameter or deeper (200ft) wells, the DR 20-2,
utilizing the larger mud pump, is recommended. The larger pump
results in faster drilling with quicker hole cleaning capabilities.

Speed of drilling, diameters and depths obtainable will vary with
soil conditions, tooling used and operator proficiency.

Standard Equipment :

Carrier :

Single Axle Trailer 2500# Axle 3500# Axle Diesel Drill Rig.
Hydraulic Tank and Axle are unitized
MIG Welded Structural Tubing

Power :

13 HP Gas engine powers all hydraulics recoil start
4.5 HP Gas engine powers 2x2 Mud Pump, recoil start

Leveling Jacks :

3 Manual Screw Type

Mast :

Structural Steel with Skid Plate
Hydraulic Cylinder raises and lowers mast
Tophead Stroke - 76 inches

Tophead Drive :

Single Speed Hadraulic motor
Rotation Speed - 115 RPM
Torque - 5000lb.in.-13 HP Gas
Torque - 6500lb.in.-14 HP Diesel
Side feed swivel Direct Drive, Double Bearing
1¼" Fluid Passage
Wrenchless Breakout with J-Latch, Saver Sub,Bowl and Slips

Pulldown /Pullback :

Hydraulic Cylinder
Pulldown - 2200 lbs- Gas Engine
Pullback - 3500 lbs - Gas Engine
Pulldown - 2800 lbs - 14 HP Diesel Engine
Pullback - 4400 lbs - 14 HP Diesel Engine

Control Console :

Located at right rear of drill
Operator friendly, simple controls
Hydraulic and Engine Gauges

Dimensions and Weights – Standard Unit :

Height – Towing Position -5.5
Height – Drilling Position -10.9
Width - 5ft
Length - 9.5ft
Weight - 1100 to 1400 lbs.

Options :

Electric Start for 13 HP Gas Engine
1½x2x8½ Mud Pump
14 HP Air Cooled Diesel(s)
Mast Extension with Winch
Swing Away Head
Night Drilling Illumination
5ft, 1.9" Diameter Drill Stem with 4130CA-21 Tool Joints(16lbs)
Additional Tooling and Bits

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Used DR 200 Drilling Rig for Sale
DR 200 Used Drilling Rig for Sale
DR 200 Land Drilling Rig for Sale
DR 200 Drilling Rig for Sale in USA
Used DR Drilling Rig for Sale

-------------------------------------------------------------------------------------------------------
Ingersoll Rand A300 Drilling Rig - For Sale
Worldoils Marketplace
Ingersoll Rand A300 Drilling Rig - For Sale
Worldrigs ID: 1386
Ingersoll Rand A300 Drilling Rig - For Sale
Ingersoll Rand A300 Drilling Rig for Sale
Used Ingersoll Rand A300 Drilling Rig for Sale


Model : A300 Drill Rig
Manufacturer : Ingersoll-Rand
Year : 1994
Condition : Used

Description :


1994 Ingersoll Rand A300 Drill Rig
Mounted on 2006 International 4300 with 99,037 Miles
Drill Rig has 9042 Hours
8000 Lbs. Torque Top Head Drive
6000 Psi Hydraulic Pump
300-Gal Water Tank
1 Winch
3l6 Moyno Pump
Slide Base with Cross Slide Head
Probe Hammer
7ft Stroke W/ A 16ft Working Height
10ft Rod Rack on the Truck Deck
2 Underdeck Auger Racks.

A-300 Monitoring Drill Specifications :

Power System :

Power transfer : Transfer case and pump drive
Hydraulic pumps :

Variable displacement : 30gpm
Fixed displacement : 40gpm
Reservoir : 100 gallons
Filtration : 10 micron element

Dimensions :

Length : 25ft. 0 in.
Width : 8ft. 0 in.
Height (derrick down) : 10ft. 9 in.
Height (derrick vertical) : 14ft. 10 in.
Weight (less truck) : 8,000lb.
Weight (Including truck) : 16,000lb.

Leveling System :

Hydraulic jacks : 3(1 front; 2 rear)
Diameter/stroke : 5"x30"
Pad diameter : 10 in. diameter

Derrick :

Tubing section : (2)5"x10"x0.25" wall
Length : 12.0 ft.
Rotary head travel : 8ft.

Feed System :

Pulldown/Pullback : 18,000 lb.
Head travel speed : 50ft/min.
Feed motor : Hydraulic; variable speed
Feed chain : Roller

Rotation System :

Motor type : Hydraulic planetary gear
torque : 8,000ft-lb. (96,000 in-lb.)
Speed range (standard) : 0-75 rpm
Side slide (hydraulic) : 12" overall
Spindle adapter : 8 bolt flange

Hoist :

Capacity : 8,000 lb.
Speed : 85ft/min.
Cable : 1/2"x 60ft.

Options :

Cat head : 8"x8-3/4" drum
Pump : Moyno 3L6
"A" rod rack capacity : Capacity of 20 pcs.(5ft)
Twin auger racks capacity : 90ft. of 6¼ x5ft.augers
Three speed rotary head : 0-215 rpm; shift-on-the-fly
Derrick extension : 6ft hydraulic telescoping
Tool boxes : 24"x18"x18"(each)
Auger centering guide : For 4â…œ" to 8¼" hollow stem augers

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Ingersoll Rand A300 Drilling Rig - 1994 Built - For Sale
1994 Built Ingersoll Rand A300 Drilling Rig for Sale
Drilling Rig - Ingersoll Rand A300 - For Sale
Ingersoll Rand A300 Used Drilling Rig for Sale
Ingersoll Rand A300 Drilling Rig for Sale in USA

-------------------------------------------------------------------------------------------------------
Ingersoll-Rand A300 Drilling Rig-For Sale
Worldoils Marketplace
Ingersoll-Rand A300 Drilling Rig-For Sale
Worldrigs ID: 383
Ingersoll-Rand A300 Drilling Rig-For Sale

Ingersoll-Rand A300 Drilling Rig for Sale
Ingersoll-Rand A300 Drilling Rig - 1994 Built - For Sale

 
Model : A300 Drill Rig
Manufacturer : Ingersoll-Rand
Year : 1994
Condition : Used

Description :

1994 Ingersoll-Rand A300 Drill Rig
Mounted on 2006 International 4300 Truck with 89,137miles
Drill Rig Has 8873 Hrs
8000 Lbs Torque Top Head Drive
6000 Psi Hydraulic Pump
300-Gal Water Tank
2 Winches
3l6 Moyno Pump
Slide Base with Cross Slide Head
Probe Hammer and Cathead
10-Foot Drill Stroke and Fixed Monopole Tower
10 Ft Rod Rack on Truck Deck
2 Underdeck Auger Racks
22ft 6” Working Height

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


-------------------------------------------------------------------------------------------------------------------------
Search words (for official use only) :
1994 Built Ingersoll-Rand A300 Drilling Rig for Sale
Drilling Rig - Ingersoll-Rand A300 - For Sale
Used Ingersoll-Rand A300 Drilling Rig for Sale
Ingersoll-Rand A300 Used Land Drilling Rig for Sale
Ingersoll-Rand A300 Drilling Rig for Sale in USA

------------------------------------------------------------------------------------------------------------------------

Ingersoll Rand A300 Drilling Rig  For Sale
Worldoils Marketplace
Ingersoll Rand A300 Drilling Rig  For Sale
Worldrigs ID: 217
Ingersoll Rand A300 Drilling Rig For Sale

Ingersoll Rand A300 Drilling Rig for Sale
Drilling Rig - Ingersoll Rand A300 - For Sale

 
Model : A300 Drill Rig
Manufacturer : Ingersoll-Rand
Year : 1994
Condition : Used

Description :

1994 Ingersoll Rand A300 Drill Rig
Mounted On A 2007 International 4300 Truck With 98,331 Miles
Drill Rig Has 8948 Hours
Top Head Drive With 800 Ft Lbs. Torque
6000 Psi Hydraulic Pump
300-Gal Water Tank
2 Winches
3l6 Moyno Pump
Slide Bas With Cross Slide Head
Rig Has Probe Hammer And Cathead
Deck Mounted Toolboxes
Under Deck Auger Racks
Telescoping Tower
16 Ft Working Height

A-300 Monitoring Drill Specifications :
Power System :
Power transfer : Transfer case and pump drive
Hydraulic pumps :
Variable displacement : 30gpm
Fixed displacement : 40gpm
Reservoir : 100 gallons
Filtration : 10 micron element

Dimensions :
Length : 25ft. 0 in.
Width :8ft. 0 in.
Height (derrick down) : 10ft. 9 in.
Height (derrick vertical) : 14ft. 10 in.
Weight (less truck) : 8,000lb.
Weight (Including truck) : 16,000lb.

Leveling System :
Hydraulic jacks : 3(1 front; 2 rear)
Diameter/stroke : 5"x30"
Pad diameter : 10 in. diameter

Derrick :
Tubing section : (2)5"x10"x0.25" wall
Length : 12.0 ft.
Rotary head travel : 8ft.

Feed System :
Pulldown/Pullback : 18,000 lb.
Head travel speed : 50ft/min.
Feed motor : Hydraulic; variable speed
Feed chain : Roller

Rotation System :
Motor type : Hydraulic planetary gear
torque : 8,000ft-lb. (96,000 in-lb.)
Speed range (standard) : 0-75 rpm
Side slide (hydraulic) : 12" overall
Spindle adapter : 8 bolt flange

Hoist :
Capacity : 8,000 lb.
Speed : 85ft/min.
Cable : 1/2"x 60ft.

Options :
Cat head : 8"x8-3/4" drum
Pump : Moyno 3L6
"A" rod rack capacity : Capacity of 20 pcs.(5ft)
Twin auger racks capacity : 90ft. of 6¼ x5ft.augers
Three speed rotary head : 0-215 rpm; shift-on-the-fly
Derrick extension : 6ft hydraulic telescoping
Tool boxes : 24"x18"x18"(each)
Auger centering guide : For 4â…œ" to 8¼" hollow stem augers

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


-----------------------------------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Ingersoll Rand A300 Drilling Rig - 1994 Built for Sale
1994 Built Ingersoll Rand A300 Drilling Rig for Sale
Used Ingersoll Rand A300 Drilling Rig for Sale
Ingersoll Rand A300 Used Land Drilling Rig for Sale
Ingersoll Rand A300 Drilling Rig for Sale in USA

----------------------------------------------------------------------------------------------------------------------------------

Ingersoll-Rand A300 Drilling Rig - For Sale
Worldoils Marketplace
Ingersoll-Rand A300 Drilling Rig - For Sale
Worldrigs ID: 816
Ingersoll-Rand A300 Drilling Rig - For Sale
Ingersoll-Rand A300 Drilling Rig for Sale
Drilling Rig - Ingersoll-Rand A300 - For Sale

Model : A300 Drill Rig
Manufacturer : Ingersoll-Rand
Year : 1993
Condition : Used

Description :


1993 Ingersoll-Rand A300 Drill Rig
Mounted on 2006 Ford F650 Truck
Truck has 233,472 Miles and Rig has 8855 Hrs
Deck Tool Storage
Underdeck Auger Racks
10 ft Rod Storage On Deck
200 Gallon Water Tank
3l6 Moyno Pump
Telescoping Tower
1 Winch

A-300 Monitoring Drill Specifications :

Power System :

Power Transfer : Transfer case and pump drive
Hydraulic pumps :

Variable displacement : 30 gpm
Fixed displacement : 40 gpm
Reservoir : 100 gallons
Filtration : 10 micron element

Dimensions :

Length : 25ft.0 in
Width : 8ft. 0 in
Height (derrick down) : 10ft. 9 in.
Height (derrick vertical) : 14ft. 10 in.
Weight (less truck) : 8,000 lb.
Weight (Including truck) : 16,000 lb.

Leveling System :

Hydraulic jacks : 3(1front;2 rear)
Diameter/stroke : 5ft x 30ft
Pad diameter : 10 in. diameter

Derrick :

tubing section : (2)5ft x 10ft x 0.25ft wall
Length : 12.0ft.
Rotary head travel : 8ft

Feed System :

Pulldown/Pullback : 18,000lb.
Head travel speed : 50ft/min.
Feed motor : Hydraulic;variable speed
Feed chain : Roller

Rotation System :

Motor type : Hydraulic planetary gear
Torque : 8,000ft-lb.(96,000 in-lb.)
Speed range (standard) : 0 - 75 rpm
Side slide(hydraulic) : 12ft overall
Spindle adapter : 8 bolt flange

Hoist :

Capacity : 8,000lb.
Speed : 85ft/min.
Cable : 1/2ft x 60ft.

Options :

Cat head : 8ft x 8-3/4ft drum
Pump : Moyno 3L6
"A" rod rack capacity : Capacity of 20 pcs.(5ft)
Twin auger racks capacity : 90ft. of 6¼ x 5ft. augers
Three speed rotary head : 0-215 rpm; shift-on-the-fly
Derrick extension : 6ft hydraulic telescoping
Tool boxes : 24ft x 18ft x 18ft (each)
Auger centering guide : For 4â…œ" to 8¼" hollow stem augers

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
1993 Built Ingersoll-Rand A300 Drilling Rig for Sale
Ingersoll-Rand A300 Drilling Rig - 1993 Built for Sale
Used Ingersoll-Rand A300 Drilling Rig for Sale
Ingersoll-Rand A300 Used Land Drilling Rig for Sale
Ingersoll-Rand A300 Drilling Rig for Sale in USA

-------------------------------------------------------------------------------------------------------
VFD Land Drilling Rig (Chinese) - 2000hp - for sale
Worldoils Marketplace
VFD Land Drilling Rig (Chinese) - 2000hp - for sale
Worldrigs ID: 622
VFD Land Drilling Rig (Chinese) - 2000hp - for sale

VFD Land Drilling Rig for Sale
Chinese 2000HP Land Rig
Land Rig Builders (China) - 2000hp

General description :

Rig type : ZJ70 rig
Rig rated dept : 6000m (127mm DP) ~7000 (114mm DP)
Traveling system : 6 x 7 (sheaves), parallel
Available height of derrick : 150 ft
Rig floor dimension / height of drilling floor : 42ft x 40ft / 30ft
Opening diameter of rotary table : 952.5mm (37 1/2 inch)
Rated input power of drawworks : 2680 hp or 2000kW
Capacity of mud pump : 3 x 1600 hp
Power transfer type : AC-VFD-AC

Drilling equipment :

Mast :
Model : JJ450/45-K11 :
Type II consist of five sections, 150 ft clear height
Top span (front x side) 2.2 m x 2.2 m
Bottom span (front x side) 9 m x 2.7 m
Max hook load 450t or 1,210,000 lbs

Drawworks :

2680 hp or 2000 kW
Driven by two AC VF motor
Max pull fast line : 485 kn (110,000 lbs)
Wire rope : F38mm
Air cool hydraulic disc brake : PS80

Crown block :

Model : TC450-7
Max hook load : 4500 kn (450t)
OD of sheave : 1524 mm
Diameter of drilling line : F38mm
No of sheaves : 7
No of sand line sheave : 1
Diameter of sand line : F14.5mm

Traveling block :

Model : YC450
Max static load : 4500 kn (450t)
OD of sheave : 1524mm
No of sheave : 6

Rotary table :

Model : ZP375
Table opening diameter : 37 1/2"
Max static load : 5850 kn
Max speed : 300 rpm
Rate power : 600 volt
Gear ratio : 3.56

Top drive :

Model : NOV/TDS-11SA/Electrical/800 hp
Hoisting capacity : 500 t
Output torque continuous : 37,500 ft-lbs (800hp)
Tool torque (intermittent @ stall) : 55,000 ft-lbs
Max speed : 228 rpm
Drilling motor : AC 575 VAC (2 x 400 hp)
Make up torque : 47,000 ft-lbs
Break out torque : 55,000 ft-lbs

Mud pumps :

Model : HHF-1600
Input power : 1600 hp (1176 kW)
Max cylinder diameter : 7" or F180mm
Length of stroke : 12" or 305mm
Rate no. of stroke : 120 spm
Three triplex single acting piston, HHF-1600

Solid control :

Shale shaker : Derrick FLC-503/rated 60L/s
Desander : DSV-10-3/rated 1280 gpm
Desilter : S-416-S/rated 1280 gpm
Mud cleaner : Derrick FLC-503-3P

Mud tank :
2,500 bbls

Generator :

Type : SR4B
No. of gen. : 04 set (01 back up)
Capacity : 1750 kva
Rate voltage : 600 vac

AC distribution / transformer :

ABB/AC S800
Transformer SUNTEN/ SC B9-1600, 600 vac/380 vac

Emergency generator :
1 set CAT C15
Diesel : 4 set CAT3512B

BOP stack :
21 1/4" BOP 2,000 wp including :
01 annular 5,000 wp
01 double ram 2,000 wp
13 5/8" BOP 10,000 wp including :
01 annular 5,000 wp
01 double ram 10,000 wp
01 single ram 10,000 wp
Comply with lifting BOP swl : 2 x 25 ton

Warranty :
Guarantee period shall last for 18 months counting from the delivery date
or 12 months from the commencement of operation at the well site,
which expiration date comes earlier/

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------------------------------------------
Search words(for official use only) - 
VFD Land Drilling Rig for Sale
2000hp Land Drilling Rig From China
Chinese Rig Builders
Chinese 2000hp Land Rig Builders
New 2000hp Chinese Rig
2000hp VFD Land Rig
2000hp new Land Rig From China
New 2000hp Chinese Drilling Rig

-------------------------------------------------------------------------------------------------------------------------------

Schramm T64HB Drilling Rig - For Sale
Worldoils Marketplace
Schramm T64HB Drilling Rig - For Sale
Worldrigs ID: 817
Schramm T64HB Drilling Rig - For Sale
Schramm T64HB Drilling Rig for Sale
Drilling Rig - Schramm T64HB - For Sale


Model : T64HB Drill Rig Long Tower
Manufacturer : Schramm
Year : 1978
Condition : Used

Description :


1978 Schramm T64HB Drill Rig - S/N: T64HB-1186
Long Tower with jib boom
(9) 4-1/2" x 20ft drill rods included
Rod rack
Detroit Diesel Deck Engine
Schramm 425 cfm / 250 psi air compressor
Cat water injection pump
(3) leveling jacks
Table bushings
Drill collar and steel tooth tri-cone included
Mounted on a GMC 7500 Truck - VIN# TJV738V566193
13 Speed Transmission
6 Cylinder Detroit Diesel Engine
10.00-20 Tires
Shows 60,940 Miles
Note:
Truck runs and drives when tested last

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Schramm T64HB Drilling Rig - 1978 Built for Sale
Used Schramm T64HB Drilling Rig for Sale
1978 Built Schramm T64HB Drilling Rig for Sale
Schramm T64HB Drilling Rig for Sale in USA
Schramm Used Drilling Rig for Sale

-------------------------------------------------------------------------------------------------------
CME 45 Auger Drilling Rig - For Sale
Worldoils Marketplace
CME 45 Auger Drilling Rig - For Sale
Worldrigs ID: 564
CME 45 Auger Drilling Rig - For Sale
CME 45 Auger Drilling Rig for Sale
Drilling Rig - CME 45 Auger - For Sale


Model : 45 Auger Drill Rig
Manufacturer : CME Drill
Year : 1978
Condition : Used

Description :


1978 CME 45 Drilling Rig Truck - Serial: 123884
Ford 4 Cylinder Gas Engine
Hours : 358
Auto Hammer
2 winch lines
22ft 4" auger sections
5ft 8" auger sections
23ft 5ft boring rod extensions
8" rock bit
4" rock bit
8" auger bit
Mounted on a 1997 Ford F450 Super Duty - VIN: 1FDLF47F8VEB32264
Miles : 235,967 on odometer
7.3L Power Stroke Diesel Engine
Manual 5 Speed Transmission
Suspension : Spring
Brakes : Hydraulic
GVWR : 15,000 lbs
Wheelbase : 161" & Tire Size: 235/85R16

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
1978 Built CME 45 Auger Drilling Rig for Sale
Used CME Drilling Rig for Sale
CME 45 Auger Used Drilling Rig for Sale
CME 45 Auger Land Drilling Rig for Sale
CME 45 Auger Drilling Rig for Sale in USA

-------------------------------------------------------------------------------------------------------
Failing CF-15 Drilling Rig - For Sale
Worldoils Marketplace
Failing CF-15 Drilling Rig - For Sale
Worldrigs ID: 803
Failing CF-15 Drilling Rig - For Sale
Failing CF-15 Drilling Rig for Sale
Drilling Rig - Failing CF-15 - For Sale


Model : CF15 Drill Rig
Manufacturer : Failing
Condition : Used

Description :


Failing CF-15 Drill Rig
5-1/2” X 8“ Dupex Piston Mud Pump
7-1/2” Retractable Table
Air Clutches
Mounted on a 1982 BRIGADIER Truck
Detroit 6 53 T Diesel Engine PTO (with Paperwork from Rebuild 3-4
Years ago & a new radiator and cooling system was also installed
at time of engine rebuild)
The pump was recently rebuilt and the table is in great shape
Lovejoy style couplings were replaced with a drive shaft
400 ft of 2-3/8" IF (2-3/8" X 15ft)

Note:
It does not have an air compressor
Hydraulic Leveling Jacks (2 on Rear, 1 on Front)

Notes from the seller:
Rig was built brand new with extra heavy-duty
mast in 1982 for drilling wells on oil pads. Was stored until around
1990 before being put back into operation but rig has worked limited
hours since then. Reliable ready-to-work drill today

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Used Failing CF-15 Drilling Rig for Sale
Failing Drilling Rig for Sale
Used Failing CF-15 Land Drilling Rig for Sale
Failing CF-15 Used Drilling Rig for Sale
Failing CF-15 Drilling Rig for Sale in USA

-------------------------------------------------------------------------------------------------------
Schramm T64HB Drilling Rig - For Sale
Worldoils Marketplace
Schramm T64HB Drilling Rig - For Sale
Worldrigs ID: 815
Schramm T64HB Drilling Rig - For Sale
Schramm T64HB Drilling Rig for Sale
Drilling Rig - Schramm T64HB - For Sale


Model : T64HB Drill Rig
Manufacturer : Schramm
Year : 1976
Condition : Used

Description :


1976 Schramm T64HB Drill Rig
Caterpillar 3406 Diesel Deck Engine - rated 425 HP
425 cfm / 250 psi Air Compressor (Rebuilt)
Pipe Rack
Hydraulic Leveling Jacks
Mounted on an International 2000 - Model 40S Truck
DT 8.7 Liter 300HP Diesel Engine
Front Axle: 16000LBS, Rear Axle: 20000LBS
Fuller 15 speed transmission
224,571 Miles
Air Suspension
300 ft of Drill Rod (20ft x 4-1/2") included
Price reduced as of September 2023

Location : Canada

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
1976 Built Schramm T64HB Drilling Rig for Sale
Schramm T64HB Drilling Rig - 1976 Built - For Sale
Used Schramm T64HB Drilling Rig for Sale
Schramm Land Drilling Rig for Sale
Schramm T64HB Drilling Rig for Sale in Canada

-------------------------------------------------------------------------------------------------------
Worldoils Brokering & Services - Land Rig Brokers, Offshore Rig Brokers