Cranes for Sale - Oil, Gas and Offshore Equipments marketplace, Oil & gas equipments

Untitled Document

Search Here

Rig/Vessel/Equipment Name:
Category:
Subcategory:
Buy/Sell/Hire/Need for hiring:
ID:

Browse equipments

No relevant equipments are found in our database.

Search again

Untitled Document

Featured equipments for sale

Worldoils Marketplace

Schramm T450WS Drilling Rig - For Sale

ID 2721

Ingersoll-Rand CM-780D Blasthole Drilling Rig for Sale

Worldoils Marketplace

Ingersoll-Rand CM-780D Blasthole Drilling Rig - For Sale

ID 2722

Worldoils Marketplace

Worldrigs ID: WR142

Ideco H44 Drilling Rig for Sale
2007 Refurbished Land Drilling Rig for Sale

Description :

Drawworks: Ideco H44 powered by (2) Detroit diesel series 60,
525 HP each, hydraulic make up and break out cathead,
Pason Systems automatic driller, 6 Pen Martin Decker
Pason System recorders, Allison 5860 transmission, Wichita brake

Mast: Ideco 117’, 358,000#

Substructure: 200 Ton, 12’ under rotary beams

Rotary Table: Brewster 22”

Top Drive: Tesco 250 HXI 700

Block & Swivel: Ideco UTB-160 block, Ideco TL-200 swivel with foster spinner

Mud Pumps: (2) F-1000 triplex pumps

Mud Pits: dual vortex linear shakers, 3 cone desander, 12 cone desilter,
600 bbl capacity and 50 bbl slug tank, (2) demco 5x6 mud mixing pump

Light Plant: (2) 60 series Detroit engines, 14L, 400KW gen light plants

Kelly Spinner: Foster

Drill Pipe: 6,500’ of 5” S135

Drill Collars: (6) 6.5” x 2.25” slick

Accumulator: 6 valve, 80 gallon koomey with remote control on side of dog house

BOP: 11” Hydril annular, 11” double ram, 5000#

Elevators & Slips: 5: BJ MGG, drill pipe 150 ton, 5.5” BJ side door,
7” 100 ton safety latch side door elevators, 8 5/8” BJ wooley slips,
5” Wooley D.P. slips, 5.5” x 7” Bash Ross D.C. slips

Communication: cell phone and Pason satellite

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Ideco H44 1000 HP Drilling Rig for Sale
2007 Refurbished Land Drilling Rig for Sale
1000 HP Drilling Rig for Sale in USA
1986 Built & 2007 Refurbished Land Drilling Rig for Sale
Ideco 1000 HP Drilling Rig for Sale
---------------------------------------------------------------------------------------------------------------

Ideco H44 Drilling Rig for Sale

ID 142

Schramm T130 Drill Rig - Range III Telescoping Mast for Sale

Worldoils Marketplace

Schramm T130 Drill Rig - Range III Telescoping Mast for Sale

ID 659

Worldoils Marketplace

Worldrigs ID: WR2707

PortaDrill TLS Drilling Rig - For Sale
Drilling Rig - PortaDrill TLS for Sale

Model : TLS Drill Rig
Manufacturer : PortaDrill
Year : 1978
Condition : Used

Description :

PortaDrill TLS Drilling Rig - For Sale

ID 2707

Worldoils Marketplace

Worldrigs ID: WR773

Midway 500 Drilling Rig for Sale
Used Midway 500 Drilling Rig for Sale

Model : 500 Drill Rig
Manufacturer : Midway
Year : 1969
Condition : Used

Description :

1969 Midway 500 Drill Rig
Mounted on 1969 Peterbilt Truck
Leroi 100S Air Compressor
Gardner-Denver 5x6 Duplex Piston Mud Pump
New Rear Jacks
Recent Cummins Swap
Transfer case rebuilt in summer 2018
Comes with 200 ft. of 2-7/8” drill pipe
Currently working
Ready to drill

Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Midway 500 Drilling Rig - 1969 Built for Sale
Drilling Rig - Midway 500 - For Sale
1969 Built Midway Used Drilling Rig for Sale
Used Drilling Rig - Midway 500 for Sale in USA
Midway Land Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Midway 500 Drilling Rig - For Sale

ID 773

KREMCO K 600 Double - 4200m Workover Rig

Worldoils Marketplace

Worldrigs ID: WR637

Kremco K 600 Double - 4200m - Used Workover Rig - For Sale
Workover Rigs For Sale
4200m Used Workover Rigs For Sale

Kremco K600 Skid Double Class III
Four axle, self-propelled, double drum,
back in rig
4200 m x 73 mm tubing
12.7 liter 60 series detroit diesel rated at 450 hp engine
Allison CLBT-5860 five speed transmission
25.4 cm x 106.7 cm main drum c/w
60.9 cm model 124 eaton brake
20.3 cm x 106.7 cm sand line brakes
31.7 meters kremco model 103-217
mast with a pressure rating of 96,522 daN and 6 lines
4200 m x 73 mm tubing and 3000 meters sucker rods
Ideco 110 ton Shorty travel blocks
Fluorescent lighting
1” drilling line
4000 m x 12.7 mm swedge sand line
Hydraulic weight indicator
Dual winches

Combination :
10.99 x 3.03 skid change house
7.33 m x 3.03 m tool house accumulator portion
John Deere 55 kW generator

Handling equipment :
58-93R foster tubing tongs
Cavins TC 101 air slips
BJ, oil country, diehl elevators
60.3 mm, 73 mm & 88.9 mm standard tubing sizes
5/8” and 1” rod sizes
2 – 8 x 45 and 2 – 6 x 16 rig mats
Skid cat walk & 4 tumble racks

Safety equipment :
4 - 18 kg fire extinguishers- quantity and size
2 – Scott SCBA self-contained breathing apparatuses
Industrial Scientific, M40 and Lumidor,
Impact Pro ZEL 0607388 gas detector
Safety and directional signs

Electrical ground bonding equipment
Stretcher
Crown saver
60.3 mm, 73 mm & 88.9 mm pipe ram
1 self-retracting life lines

BOP equipment :
Class III
Townsend, 35 MPA double-gate and a shaffer, 35 MPA annular
80 gallon (30 liters) accumulator with a tank size of
140 gallon w/ 3 control and a remote at combination building
73 mm safety valve with a pressure rating of 35 Mpa
76.2 mm rod BOP
76.2 mm 6 m swab lubricator c/w tool trap
73 mm gate valve

Pump :
Skid pump
10.16 cm x 12.7 cm National JWS-300 triplex with a
pressure rating of 35 mpa
Detroit 8V71 300 hp engine
Spicer 5 speed manual transmission
3 x 2 x 13 mission magnum I charger pump
7 valve manifold with a pressure rating of 35 Mpa

Mud tank :
35 M3 mud tank c/w mud guns, mixing hopper and settling trough
20 - 5.08 cm X 6 m line pipe and suction hose
Poor boy degasser
External gauge

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words(for official use only) -
Kremco K 600 Double - 4200m Used Workover Rig for sale
Workover Land Rigs in USA
Used 4200m Kremco K 600 Double Workover Rig for Sale
Land Workover Rigs For Sale
Used American Workover Rigs
Workover Rig for sale
Kremco K 600 Double (4200m) for sale
-----------------------------------------------------------------------------------------------------------

Kremco K 600 Double - 4200m - Used - Workover Rig - For Sale

ID 637

Worldoils Marketplace

Worldrigs ID: WR2701

Drillmax 250 Well Drilling Rig for Sale
Drilling Rig - Drillmax 250 - For Sale

Model : 250 Drill Rig
Manufacturer : Drillmax
Year : 2015
Condition : Used

Description :

Drillmax 250 Well Drilling Rig - For Sale

ID 2701

Speedstar Quickdrill Drilling Rig For Sale

Worldoils Marketplace

Speedstar Quickdrill Drilling Rig - For Sale

ID 784

Speedstar DSI QuikDrill Drilling Rig for Sale

Worldoils Marketplace

Speedstar DSI QuikDrill Drilling Rig - For Sale

ID 1046

Versa Drill V-1040DP Drilling Rig for Sale

Worldoils Marketplace

Worldrigs ID: WR829

Versa Drill V-1040DP Drilling Rig for Sale
Drilling Rig - 2010 Built - For Sale

Model : V-1040DP Drill Rig
Manufacturer : Versa Drill
Year : 2010
Condition : Used

Description :

2010 Versa Drill V-1040DP Drill Rig
Caterpillar C15 Diesel Engine (Tier III - S/N: JRE11211) - rated
540 HP & 2100 RPM
IR 1070 cfm / 350 psi Air compressor (Clutch)
6500+ Hours on gauge
40,000 lbs of pullback
Hammer Lubricator 7 Gallon
Bean 4 piston bean water injection 25 GPM
Main Winch 18k & Secondary 2k
Pipe rack holds 18 pipe
4 stabilizing Jack
Mounted on a 2010 Peterbilt 367 Truck
Cummins ISX 15 Diesel Engine (Tier III - S/N: 1040039) - rated
565 HP (Heater) with 31,000+ Miles on gauge
Eaton Fuller 13 Speed LL Transmission
Jake Brakes
22,000 lb. front axle, 46,000 lb. rear tandem axles with driver
controlled main locking differentials, total 68,000 GVW
Total Weight 55,520 lbs = Front Axle: 15,620 lbs &
Rear Axle: 39,560 lbs

Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------

Search words (for official use only) :
Used Drilling Rig - Versa Drill V-1040DP - for Sale
2010 Built Versa Drilling Rig for Sale
Used Versa Drill V-1040DP Drilling Rig for Sale
Used Land Drilling Rig for Sale in USA
Versa Used Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Versa Drill V-1040DP Drill Rig - for Sale

ID 829

Chicago Pneumatic T650 Drilling Rig for Sale

Worldoils Marketplace

Chicago Pneumatic T650 Drilling Rig - For Sale

ID 2544

Worldoils Marketplace

Diedrich D120 Drilling Rig - For Sale

ID 2684

Worldoils Marketplace

Worldrigs ID: WR2685

Sonic SDC500-29P Drilling Rig for Sale
Used Sonic SDC500-29P Drilling Rig for Sale

Model : SDC500-29P Drill Rig
Manufacturer : Sonic
Condition : Used

Description :

Sonic SDC500-29P Drilling Rig - For Sale

ID 2685

Worldoils Marketplace

Worldrigs ID: WR2686

Mayhew 1000 Drilling Rig for Sale
Drilling Rig - Mayhew 1000 - For Sale

Model : 1000 Drill Rig
Manufacturer : Mayhew
Condition : Used

Description :

Mayhew 1000 Drilling Rig - For Sale

ID 2686

Worldoils Marketplace

Worldrigs ID: WR782

Schramm T64HB Drill Rig For Sale
Drilling Rig - Schramm T64HB for Sale

Model : T64HB Drill Rig - Retrofitted
Manufacturer : Schramm
Year : 1978
Condition : Used

Description :

Schramm T64HB Drill Rig - For Sale

ID 782

Worldoils Marketplace

Sonic SDC500-29P Drilling Rig for Sale

ID 2679

Worldoils Marketplace

Simco 2400 SK-Drilling Rig - For Sale

ID 1130

New UMD 180 Land Drilling Rig - For Sale

Worldoils Marketplace

UMD 180 New Land Drilling Rig - For Sale

ID 597

Gardner Denver 14W Drilling Rig for Sale

Worldoils Marketplace

Gardner Denver 14W Drilling Rig - For Sale

ID 1205

2008 Built Howard Turner HTB3KDD Drilling Rig

Worldoils Marketplace

Howard Turner HTB3KDD Drilling Rig For Sale

ID 2670

Worldoils Marketplace

Gus Pech 900XHR Drilling Rig - For Sale

ID 2667

Davey M8A Table Drive Drilling Rig for Sale

Worldoils Marketplace

Davey M8A Table Drive Drilling Rig for Sale

ID 2662

Davey M8 Table Drive Drilling Rig for Sale

Worldoils Marketplace

Worldrigs ID: WR2661

Davey M8 Table Drive Drilling Rig for Sale
Drilling Rig - Davey M8 Table Drive

Model : M8 Drill Rig
Manufacturer : Davey
Condition : Used

Description :

Davey M8 Table Drive Drilling Rig for Sale

ID 2661

LTO 350 & 550 Cooper Copy Workover Rig for Sale

Worldoils Marketplace

LTO 350 & 550 Cooper Copy Workover Rig - For Sale

ID 2775

800 HP Mechanical Drilling Rig - Trailer Mounted - For Sale

Worldoils Marketplace

Worldrigs ID: WR2774

Wilson 42 - 110 Double Trailer Mounted Rig for Sale
800 HP Mechanical Drilling Rig - Trailer Mounted - For Sale

General Description :

Make : Wilson

Wilson 42 - 110 Double Trailer Mounted Rig - For Sale

ID 2774

PortaDrill TLS Top Head Drilling Rig - For Sale

Worldoils Marketplace

PortaDrill TLS Top Head Drilling Rig - For Sale

ID 2773

2000 HP National 1320 Drilling Rig for Sale

Worldoils Marketplace

National 1320 2000 HP Drilling Rig - For Sale

ID 2772

Drilling Rig - Service King 1000 HP for Sale

Worldoils Marketplace

Worldrigs ID: WR2654

Service King 1000 HP Drilling Rig for Sale
Drilling Rig - Service King 1000 HP for Sale

Description :

Crown, (4) Sheave McKissick, 1 ¼”,
Date : 1/ 2012,
SHL : 450,000#
S/N: DK504, Cluster Model : 744-1, 1 1/8” Line, 36” Sheaves,
Fast Line Model : 741-1, 1 1/8” Line, 42”, 40 Tons,
Sand Line Model : 741-1, 1.12” Line, 30” Sheave, 40 Tons
Dead Line Anchor Model : 741-1, 1 1/8” Line, 30” Sheave

Carrier, (5) Axel / Trailer Mount, Model 1000,
SK#: 395T, Gross Weight:, 177,900 Lbs.,
Date: 3/2012, VIN: 1S90TDD85CL976333, (1) Sand Line Reel
(1) Electric Drive Hydraulic Pump,
(2) Oil Saver Hydraulic Filters

Engine # 1, Detroit 2010 Model, 14.0 Litre,
Allison Transmission, S/N: 06R1049132

Engine # 2, Detroit 2010 Model, 14.0 Litre,
Allison Transmission, S/N: 06R1049335

(1) Hydraulic Tank – 350 Gallons

Drawworks, Model:

46 x 10, S/N: DW 2387, Transmission,

Model: 1000, S/N: 5962350
S/N: 5962688, Power Drive Gear Box: 2.47 x 1,
Dual Actuated Air Band Brake, Hydraulic Drum Brake,
Air Actuated Crown Saver, (2) Hydraulic Cat
Heads – Make Brake, (1) Drillers Console

Mast, Model :

117ft, SHL 450,000#, S/N: DK 504,

(3) Hydraulic Raising Cylinders
Built in Top Drive Torque Track, Kelly Hose, Stand Pipe 5000 PSI
with 5000 PSI Type D MSF Mud Gauge S/N: 41814, (3) 5000 PSI
Oteco Shut Off Vales, (2) 250 Ton Bails – 79” Long,
Finger Board – (22) Fingers, (1) Sentry Block / Hook
Combo Model SI-BH-250, 36” Sheave Size Line 1 ¼”, S/N: 07054,
Date: 2007, (2) Air Hoist Lines, Fully Rigged for Safety Cable,
Number of Raising Cylinders = Number of Extensions

Mud Pits :
(2) Pit System – 950 BBL

Shaker Pit (2) Compartments, (2) Swaco Mongoose Shakers,
S/N: PF 2664, S/N: PF 2663, (1) Mongoose Mud Cleaner with
Desander Model: 2-12, S/N: 21963, S/N: 4500732 / Desilter,
Model: 6T4, S/N: 23043, (1) 5 Star 6 x 5 x 14 Cent Pump p/b
50 HP Electric motor

Suction Pit, Full Set of Pit Lights, (2) Caustic Barrels,
(4) 10 HP Agitators (4) Compartments, (2) Prime Mud Movers –
Mission Magnum 6 x 5 x 14 ea p/b 50 HP elec motors

Water Tank :
500 BBL, (2) 25HP Mission Water Transfer Pumps x 4RS,
(2) Compartment Chemical Pit

Gas Buster, Swaco, Model: 2011, 4ft x 10ft, 6” Outlets,
6” Inlets, S/N: MGS-M-118 Skidded

Choke Manifold, (6) 4 x 5M, MGV – HECI, (1) 2 x 5M, MGV – HECI,
(1) 2 x 5M Manual Choke – HECI, 3 Way Watermelon

Pill Pit, (1) Five Star 6 x 5 x 14 Cent Pump p/b 50HP
elec motor w/(1) Hopper

Mud Pump #1, SLF 1300, Engine: Cat 399B PCTA, Date: 12/23/2011,
S/N: 35B06278 Torque Converter, Oil Works, Model: C-300-100,
Type E, S/N: 1600, Five Star Charge Pump, 6 x 5 x 14 p/b 50HP
Electric Motor –, (1) 5000PSI Pulsation Dampener, (1) 5000PSI
Emergency Pop Off – Odrill, (2) 5000PSI Gate Valve - Oteco
(3) SLF 1300 Modules

(1) Mud Pump Center Skid with Frogs, Miscellaneous Basket,
Rig Mats (Table Mats)

Mud Pump #2, SLF 1300, S/N: KMI 01, Engine: Cat 399 PCTA,
Date: 05/ 2011, S/N: 35B4092, Torque Converter, Oil Works,
Model: C-300-100, Type E, S/N: 1600, Five Star Charge Pump,
6 x 5 x 14 p/b 50HP Electric Motor –, (1) 5000PSI Pulsation
Dampener, (1) 5000PSI Emergency Pop Off – Odrill, (2) 5000PSI
Gate Valve – Oteco (3) SLF 1300 Modules

(1) Top Dog House with Tools, (2) BJ Elevators, (2) Tongs,
(3) Slips, (2) Drill Pipe Slips, (4) Mud Wipers, (4) Sets
of Pit Stairs, Spare Tong Heads, (1) Hydraulic Accumulator
Suit Case

BOPs :
(1) 11” 5M Annular – Hydril GK
(1) 11” 5M Double – Shaffer Style
(1) 11ft 5M Mud Cross with Wing Valves

Top Drive :
Venture Tech 250 T w/ (1) Top Drive Service Loop, (1) Bottom
Half for Top Drive Torque Track, Hydraulic Top Drive House p/b
(2) Detroit 60 Series (14.0 Litre), has “Dan Voss” Hydraulic
Drive Pump System – (2) Pumps ea (4) Outlets ea, (1) Bug Blower

(1) Basket with (6) Crossover Subs

Junk Basket, Floor Hand Rails, Flow Line Skid with hoses,
(2) Oteco Valves, Miscellaneous Flow Line Plumbing,
(1) 4ft x 20ft V Door, (3) Saver Subs, (1) Crossover Sub

Accumulator :
Advanced Pressure Inc., (12) Bottles, 5 Station, 3000PSI System,
S/N: 11871, (2) 55 to 1 Air Pumps, (8) Steel Flex Accumulator
Lines, (1) Pressure Washer Power Swivel, Venture Tech,
Model: XK 250 Ton

Generator House :
Genset # 1, Engine: 12V 2000, Generator: Kohler – 450KW,
Model: Power Systems 600
Genset # 2, Engine: 12V 2000, Generator: Kohler – 450KW,
Model: Power Systems 600
(1) Screw Compressor – Gardner Denver, Electra Saver,
Model: EBE 990, S/N: S334319

Mud Boat – Main Section, 60ft Long x 10ft Wide (4) 12” Beams
Mud Boat – Extension, 17ft 3” Long x 11ft Wide

Substructure, 35ft Long x 11ft Wide

Rotary Table, Sentry – 20.5”, Date: 2007, S/N: 074102

(1) Rotary Angle Gear Box
(1) 40ft Parts House with Divider
(1) Wire Line 15,000 x .092 – Five Star
Consumables

Camp Transformer – 6 Outlets

Location : USA

Service King 1000 HP Drilling Rig - For Sale

ID 2654

Worldoils Marketplace

Worldrigs ID: WR2653

NOV Rapid Drilling Rig for Sale
1500 hp Rapid Drilling Rig for Sale

Description :

Substructure :
NOV - Slingshot type (2 piece)
Clearance : 20ft with 18ft of clearance
Capacity : 500,000# loading
Six well skidding system

Mast :
NOV - Telescoping
Height : 80ft
Capacity : 500,000#
Winch & Gin Pole : 5,000#

Drawworks :
NOV - SSGD 250 (disc brakes)
Rating : 1500- hp
Capacity : 500,000# on eight 1¼” lines.
Motor : Baylor AC

Top Drive :
NOV - TDS 10R
Rating : 250 ton
Torque Capacity :
36,500 ft/lbs intermitting
20,000 ft/lbs @ 98 rpm continuous
9730 ft/lbs @ 182 rpm continuous

Drillers Cabin :
NOV - Purged
Amphion Controls

Pipe Handling :
Iron Roughneck - NOV ST - 80R
Range : 4¼” to 8½”
Torque Capacity :
60,000 ft/lbs make up
80,000 ft/lbs brake out
BX - 450 Elevators (250 ton)
Range : 2 7/8”, 5”,7”, 95/8” & 13 3/8”.
PS - 21 Slips (250 ton)
Range : 2 7/8”, 5”, 7”, 9 5/8” & 13 3/8”.
Erector arm, pipe funnel and pipe rack wings.

Mud System :
Mud Pumps - 2 NOV F-1600
Rated : 1,600 hp.

Discharge manifold & Suction skid

Stand Pipe :

5”, 1002

Mud Pits (covered)
Capacity : 625 bbls
Mixing System & skid
Shale Shakers : 2 Derrick
Trip tank : Two 25 bbl tanks & pumps
Rolling Flow Line System (15ft spacing)

BOP Equipment :
11” X 5m Shaffer Annular (flanged)
11” X 5m Shaffer Double Ram (studded)
11” X 5m Mud Cross (flanged with 3 1/8” outlets)
Re-certified by OEM
Choke Line :
3 1/8” X 5m HCR Valve
3 1/8” 5m Manual valve (replace)
3 1/8 Coflex hose :
Three - 15ft - 3 1/8” flanged choke lines
10ft - 3 1/8” flanged choke line
Four - 3 1/8” studded Tees with one filled blind flange
Kill Line 2” Coflex hose
Two : 3 1/8” X 5m manual valves (replace)
Check Valve :
NOV Hydraulic Handling System
3 1/8” X 5m Choke Manifold (hydraulic & manual chokes)
Gas Buster
Flare Stack & line

Power :
Two 3512C Caterpillar Engines
Rated : 1476 hp @ 1200 rpm
Two Baylor Generators
Rated : 1750 kVa, 600 volts / 60 HZ
NOV VFD & MCC
Bi-fuel System

Drill Pipe :

370 jts - 5” 19.5 #/ft., NC 50

Inspected by Drilco
Critical Capital Spares :
F-1600 Mud Pump
Baylor 1750 kVa Generator (for repair)

Winch – 5,000#

Hydraulic Cylinders :
Substructure Raising (repairing NOV)
Derrick Raising (repairing NOV)
Derrick Scoping (repairing NOV)
BX 450 Elevators
PS 21 Slips

Skid System Description :

Applied Machinery Corporation custom built skidding system.
Capable of 75ft skidding.
Key description :

Rig Skid System :

12” Elevated Skid
Draworks Skid Section
Starter Skid Section (ODS/DS X 43ft)
Standard Skid Section (ODS/DS X 15ft)
Log of Pins, Spreaders, and Claws
AMC Hydraulic Drill Line Spooler
Festoon Track

Hydraulics :
2 Hydraulic Cylinders
10” Bore X 25” Stroke
3,000 psi Working Pressure
Associated Hoses and Fittings

Festoon :
8ft X 35ft X 12” Master Skid
Capable of supporting a 75ft Skid
4” Integrated Track and Roller for Festoon and Grasshopper

Shaker and Flowline Header :
10” “Mona-Flow” line with fittings and jets
Rolling capability to support skids
Trip Tank and mud bucket hoses

Rig Load List

Single Well Pad	Loads	3 Well Pad
Shaker Pit	1	Shaker Pit
Suction Pit	2	Suction Pit
Trip tank & Choke Manifold	3	Trip tank & Choke Manifold
F- 1600 Mud Pump	4	F- 1600 Mud Pump
F- 1600 Mud Pump	5	F- 1600 Mud Pump
Utility Skid	6	Utility Skid
3512 Caterpillar Gen Set	7	3512 Caterpillar Gen Set
3512 Caterpillar Gen Set	8	3512 Caterpillar Gen Set
Air Compressor Skid	9	Air Compressor Skid
VFD	10	VFD
Festoon & Grasshopper	11	Festoon & Grasshopper
Fuel Tank	12	Fuel Tank
Rig Water Tank	13	Rig Water Tank
Drawworks / Koomey	14	Drawworks / Koomey
Substructure	15	Substructure
HPU Skid & Grasshopper	16	HPU Skid & Grasshopper
Drillers Substructure	17	Drillers Substructure
Drillers Cabin	18	Drillers Cabin
Drill Line Spool	19	Drill Line Spool
2 Pipe Wings	20	2 Pipe Wings
2- Pipe Wings &Arm	21	2- Pipe Wings &Arm
Flow line, Pipe Handler, CoFlex	22	Flow line, Pipe Handler, CoFlex
Flare Box & Line	23	Flare Box & Line
2 sets Pipe Racks	24	2 sets Pipe Racks
2 X Hose Baskets	25	2 X Hose Baskets
Drill Pipe: 5" , 19.5 #/ft	26	Drill Pipe: 5" , 19.5 #/ft.
Drill Pipe: 5" , 19.5 #/ft	27	Drill Pipe: 5" , 19.5 #/ft.
Drill Pipe: 5" , 19.5 #/ft	28	Drill Pipe: 5" , 19.5 #/ft.
Pipe Bunks X 4	29	Pipe Bunks X 4
Tool / Nipple House	30	Tool / Nipple House
Hydraulic Shop	31	Hydraulic Shop
Parts House	32	Parts House
BOP in Cradle	33	BOP in Cradle
Stairs & Porches	34	Stairs & Porchesin Cradle
Mats X 5	39	Mats X 5
	44	Flow Line X 2
	48	Skid System X 4

Price & terms : Please enquire using the email form below.

NOV Rapid Drilling Rig for Sale

ID 2653

Worldoils Marketplace

Versa Drill V2000 Drilling Rig - For Sale

ID 80

Worldoils Marketplace

Worldrigs ID: WR562

Speedstar 30K Drilling Rig for Sale
2004 Built Speedstar 30K Drilling Rig for Sale

Model : 30K Drill Rig
Manufacturer : Speedstar
Year : 2004
Condition : Used

Description :

2004 Speedstar 30K drill rig
Sullair 1000 cfm / 350 psi Air Compressor
3,500 Hours +
Hammer Oilier
6 Rod Carousel
Bean 20 GPM Water Injection Pump
Break Out Wrench and Rod Spinner
2 Winches
Mounted on a Peterbilt Truck
CAT C15 diesel engine at 550 HP
Fuller 8 Speed Transmission
97,750 miles
(32) Drill Pipe (20' x 4 1/2" x 2 7/8" IF) Cost Extra

Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

------------------------------------------------------------------------------------------------------------
Search words(for official use only) -
Speedstar 30K Used Drilling Rig for Sale
Used Speedstar 30K Drilling Rig 2004 Built
Speedstar Drilling Rig 2004 Built for Sale
Speedstar 30K Drilling Rig for Sale in USA
Speedstar Land Drilling Rig for Sale in USA
-----------------------------------------------------------------------------------------------------------------

Speedstar 30K Drilling Rig for Sale

ID 562

Worldoils Marketplace

Schramm T660W Drilling Rig - For Sale

ID 549

Worldoils Marketplace

Worldrigs ID: WR463

Drilling Rig T4W For Sale
T4W Drill Rig For Sale

1984 T4W
70,000 pull back
900/350 air
12V71 on deck
3208 cat in carrier
good tires
set-up to run 2 7/8 IF rods
300 ft of rods
more rods avalible
some toolling and extras
serial #14042

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------
Search words(for official use only) -
Drill Rig T4W For Sale
T4W Drilling Rig For Sale
-----------------------------------------------------

Drilling Rig T4W For Sale

ID 463

Worldoils Marketplace

Worldrigs ID: WR502

Taylor C550 Double Drum Workover Rig for Sale
Used Taylor C550 Workover Rig

Drawworks :
2007 Model Taylor C550 Double Drum Workover Rig with 16,000’ of 7/16”
swab line, with 475 HP Cat engines

Mast :
112’ Telescoping, 240,000# Capacity

Carrier :
5 Axle carrier unit

Substructure :
10’ Taylor hydraulic floor with working height of 8 to 12’ and a
substructure ragted at 300,000#

BOP :
11” x 3000# LWS Shaffer 5K double ram and annular

Water Tank :
200 BBL work tank

Handling System :
5K pump Iron

Handling Tools :
BJ tongs for tubing and sucker rode & Kavin Slips

Ancillary Equip :
Complete with pipe racks and cat walk

Office Capacity :
Complete with portable office for service companies, with enough
desk space for four people, I.e. directional personnel

Drilling Components

Mud Pump (Main) :
PZ7 Main 550 HP mud pump with Detroit series 60 enging and 5- speed transmission

Mud Pump (Aux) :
Auxillary mud pump system – with 24 hour programs a 1000 HP
pump complete with one (1) Swaco Mongoose, one (1) Swaco Desander &
one (1) Swaco Hopper with two (2) 300 bbl tanks are available

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------
Search words(for official use only) -
Taylor C550 Double Drum Workover Rig for Sale
Land Rigs For Sale
Used Land Rigs For Sale
Used American Workover Rig
Used Taylor C550 Workover Rig
Workover Used Land Rigs For Sale
---------------------------------------------------------------------------------------------

Taylor C550 Workover Used Rig - for sale

ID 502

Schramm Rotadrill T64HB Drilling Rig for Sale

Worldoils Marketplace

Schramm Rotadrill T64HB Drilling Rig - For Sale

ID 196

Worldoils Marketplace

Ingersoll-Rand T3W Drilling Rig - 2004 Built - For Sale

ID 1033

Ingersoll-Rand ECM 370 Crawler Drilling Rig for Sale

Worldoils Marketplace

Ingersoll-Rand ECM 370 Crawler Drilling Rig - For Sale

ID 1202

Worldoils Marketplace

Worldrigs ID: WR2635

LTI 1000KP Drilling Rig
Drilling Rig - LTI 1000KP 2000Hp - For Sale

Description :

General Description :
Make : Lee C Moore
Estimated Drilling Depth : 20,000ft
Estimated Rig Move Loads : 75
Estimated Camp Move Loads : 20
Rated HP : 2000

Mast :
Height : 147.00ft
Static Hook Load Capacity : 1,000,000lb
Mast Racking Capacity : 20,800ft

Substructure :
Style : Parallelogram
Height : 30.00 ft
Clear Height : 25.25 ft
Casing Capacity : 1,000,000lb
Maximum Setback Load : 600,00lbs

Drawworks :
Make : LeTourneau
Model : LDW 1000k
Power Rating :2000hp

Input Power :

2 ea Oilfield

Electric

Marine Inc
TT 1500
Drilling Line Size : 1½"
Brake Type - Band or Disk : Disk

Top Drive / Power Swivel :
No Top Drive

Swivel :
No Swivel

Rotary Table :

Make :

LeTourneau

LW-375

Table Opening : 37 ½"
Maximum Load Rating : 650 Ton

Power Generation :
No Engines
No Generators
SCR / VFD / DC /DC : VFD Rig

Mud System :

@ 120 spm
Pressure Rating : 7,500 psi
Active Mud Volume : 590 bbls
Reserve Mud Volume : 460bbls

Shale Shakers :

3 ea Axiom

Process Ltd.
Mud Cleaner : N /A
Desander : N /A
Desilter : N /A
Centrifuge : N /A

Well Control :

Controls
8 stations
3,000 psi

Enhancements :

Power Slip Frame :

Access Oil

LTI 1000KP Drilling Rig - 2000Hp - For Sale

ID 2635

Ingersoll-Rand T4BH (Blast Hole) Drill Rig for Sale

Worldoils Marketplace

Worldrigs ID: WR667

Ingersoll-Rand T4BH (Blast Hole) Drill Rig For Sale
Used Ingersoll-Rand T4BH (Blast Hole) Drill Rig

Model : T4BH (Blast Hole) Drill Rig
Manufacturer : Ingersoll-Rand
Year : 1999
Condition : Used

Description :

1999 Ingersoll-Rand T4BH (Blast Hole) Drill Rig
S/N: 7434
Cummins QSK19 Diesel Deck Engine
1050 cfm / 350 psi Air Compressor
Hammer Oiler
Cat Water Injection Pump
37,500 lbs of Pullback
2 Motor Spur Head
4456 hours on meter
5 Rod Carousel
Mounted on a CCC (Crane Carrier Company) Truck
CAT 3306 Diesel Engine
8,741 Miles on gauge

Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------------------------------------
Search words(for official use only) :
Ingersoll-Rand T4BH (Blast Hole) Drill Rig For Sale in USA
1999 Built Ingersoll-Rand T4BH (Blast Hole) Drill Rig For Sale
Used Drilling Rig - Ingersoll-Rand T4BH (Blast Hole) - For Sale
Land Drilling Rig For Sale in USA
Used Ingersoll-Rand T4BH Drilling Rig For Sale
-----------------------------------------------------------------------------------------------------------

Ingersoll-Rand T4BH (Blast Hole) Drill Rig for Sale

ID 667

Foremost Barber DR12 PTO Drilling Rig for Sale

Worldoils Marketplace

Foremost Barber DR12 PTO Drilling Rig - For Sale

ID 847

Worldoils Marketplace

Driltech D25KW Drilling Rig for Sale

ID 530

Chicago Pneumatic 650 S/S Drilling Rig for Sale

Worldoils Marketplace

Chicago Pneumatic 650 S/S Drilling Rig - For Sale

ID 2629

Trailer Mounted Telescopic Mast, Double Rig for Sale

Worldoils Marketplace

Worldrigs ID: WR2655

Trailer Mounted Telescopic Mast, Double Rig for Sale

Used Trailer Mounted Drilling Rig - For Sale

Description :

General Description :
Make : Victory
Year Built/Rebuilt : 2009
Estimated Drilling Depth : 12,000 ft
Estimated Rig Move Loads : 48
Estimated Camp Move Loads : 22
Rated HP: 850

Mast :
Height : 105.00 ft
Static Hook Load Capacity : 350,000 lbs
Mast Racking Capacity : 12,000 ft

Substructure :
Style : Telescoping Mounted on Trailer
Height : 20.00 ft
Clear Height : 17.00 ft
Casing Capacity : 440,000 lbs
Maximum Setback Load (lbs) : 375,000

Drawworks :
Make : TSM
Power Rating : 850 hp
Input Power :
1 ea General Electric
GEB 22 A3
Brake Type - Band or Disc : Disc
Drilling Line Size : 1 1/8"
Auxillary Brake : TSM 236H SSB 90#RL W/CVCP

Top Drive / Power Swivel :
Make : Victory Rig Equipment
Model : VRT200H
Capacity : 220 Ton
Torque - Continuous : 16,000 ft-lb

Swivel :
No Swivel
Make : TSM
Model : TSM 200
Capacity : 200 Ton

Rotary Table :
Make : TSM 17.5
Table Opening : 17 ½"
Maximum Load Rating : 150 Ton

Power Generation :
Engines : 3 ea Caterpillar C 32
Generators : 3 ea Caterpillar SR 4 B
SCR / VFD / DC/DC : VFD Rig

Enhancements :
Forklift : Caterpillar 930 H
Iron Roughneck : NOV ST-80 C
Mud System :
Mud Pumps :
2 ea Weatherford Oil Tools MP-10
1,000 hp @ 140 spm
Reserve Mud Volume : 0bbls
Model : TSM 850
Pressure Rating : 5,000 psi
Active Mud Volume : 905 bbls
Power Rating :
Shale Shakers : 2 ea MI Swaco Mongoose
Mud Cleaner : N/A
Desander : Brandt 10" X 2 Cones
Desilter : Brandt 5" X 16 Cones
Centrifuge : N/A

Well Control :
Annular :
11" 5,000 psi, Doyles Valves,
Single Ram Preventer :
11" 10,000 psi, Doyles Valves, Type-U
Double Ram Preventer :
11" 10,000 psi, Doyles Valves, Type-U
Choke Manifold :
Weatherford Oil Tools
4 1/16"" 5,000 psi
BOP Closing Unit :
T3 Energy Services
6 Station 3,000 psi

Location : Mexico

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------------------
Search words (for official use only) :
850HP Trailer Mounted Telescopic Mast Drilling Rig
2009 Built Trailer Mounted Telescopic Mast Rig for Sale

Land Drilling Rig - Trailer Mounted for Sale

2009 built Telescopic Mast, Double Rig for Sale

Used Land Drilling Rig for Sale

-----------------------------------------------------------------------------------------------

Trailer Mounted Telescopic Mast, Double Rig - For Sale

ID 2655

3000HP Electric Deep Drilling Rig - For Sale

Worldoils Marketplace

Worldrigs ID: WR2891

3000HP Electric Deep Drilling Rig - For Sale

Deep Land Drilling Rig for Sale

Description :

Rig Specifications

A. General Rig Specification :

The rig will be suitable for operation in the temperature range 0°C to 55°C

General Description :

- Drilling depth: 9000m(4-1/2"DP)

- Max hook load of mast and substructure: 6750KN

- Travelling system: 7×8

- Diameter of drilling line: 1-5/8"(42mm)

- Top drive: DQ90BS-JH

- 37 1/2" electric motor driven Rotary table

- Rated input power of drawworks: 3000HP

- Mud pump unit: 1600HPX3

- Mast type and effective height: K type, 49.5m

- Substructure type and clear height: Slingshot,42ft/12.8m

- Electric drive type: AC-VFD-AC

- Rig power system: 7xCAT3512B, 7X1101bKW 600V/60Hz & 1xCAT C18, 545KW/60Hz

- Voltage/Frequency/Phase: 600V/480V/110V 60HZ/3phase

- All electric equipments are in accordance with API RP505 standard.

- Main structure painting standard

- Explosion standard: ATEX/IECEX/UL/CNEX

A.1.1. Mast and Associated Equipment : Qty - 1 set

- To be API monogrammed, possessing valid API-4F certificate. Confirmed to API 4F

4th edition,PSL1,SSL: E2 U2.

- Nominal drilling depth: 6000-9000m(4-1/2"DP); 5000-8000m(5"DP);4000-7000m(5-1/2"DP)

- Max. Static hook load: 1,500,000 lbs/750ton/6750KN(7×8 strand,14 lines);

- Effective height:162.5ft/49.5 m as per API approved Mast to safely accommodate top drive

and travelling system;

- Height of monkey board(from drill floor):80ft 4-1/2",83ft 8",86ft 11-1/4"(24.5m,25.5m,26.5m);

- Top span(front x side): 8ft 6-3/4"×7ft10-1/2"(2.6m×2.4m);Bottom span(front): 32ft 9-3/4"(10m) .

- Steel material. Welding Procedure as per AWS.

The allowed wind speed of mast :

- Operating mode(Full stands and full hook load):16.5m/s (32knots)

- Working condition(Full hook load and full rotary beam load ):16.5m/s (32knots)

- Erection condition:16.5m/s (32knots)

- Unexpectable condition (Full rotary beam load and full stands): 30.7m/s (60knots)

- Expectable condition(Full rotary beam load ):38.6m/s (75knots)

- Equipped with two sets of buffer hydraulic cylinders, which can be used for raising and

lowering the mast.

- 2 mast ladders -without cage (one each to monkey board & crown block)

- With hange line for hanging travelling system(include Top drive) when drilling line cutting;

including wirelines,shackles.

- With levelling shims and two (2) 100 tons each hydraulic jacks with hand pumps.

- Four(4) 2t Derrick Hoist Blocks with secondary retention are used.

- Two(2) 4t Derrick Hoist Blocks with secondary retention are used.

- With Mast Raising Line Ø80mm（ 3 1/8"）

- With Mast Support Frame:Using for supporting mast during Rig-Up & Down

- 1 ea. SALA Self-retracting fall arresting devices & Derrick safety harness with frontal

pad for the derrick man to be installed above the derrick board for the derrickman(15m),

- 1 ea.SALA Self-retracting fall arresting devices & Derrick safety harness with frontal pad

for the derrick man to be installed above exit point from the mast ladder to the derrick board

platform at the mast ladder side(15m).

A.1.2. Monkey Board - Qty : 1 set

Monkey board to support :

- 286 stands of 5-1/2" Drill pipes(8000m);

- 6 stands of 8" D/Collars;

- 3 stands of 10" D/Collars;

- 2 stands of 14" D/Collars.

- With adjustable centre diving board and hinged extension. Adjustable 80ft 4-1/2",83ft 8",86ft11-1/4"

(24.5m,25.5m,26.5m) above drill floor level complete with safety chains on all fingers.With

Mounting bracket to accommodate pullback air winch. Access platform with handrails and

escape line (with easy and safe access) . Logo on the monkey board can be painted as

clients requirement.Without Wind Wall.

A.1.3. Tubing "Belly" Board - Qty : 1 set

- Tubing "belly" board.

- Features: Completed with walkway and handrails in the outside of tubing belly board.

A.1.4. Casing Stabbing Board - Qty : 1 set

- Pneumatic Casing stabbing board – adjustable from 20ft - 50ft above rig floor, having two braking

devices withone being failsafe. Both locking devices are independent of each other.

- Operations to be independent of casing tongs.

- The casing stabbing board is equipped with upper and lower limit switches.

- Guardrails and fall protection system will be installed（SALA Fall arrest 3400900）.

Full body harness with lanyard as per BS or ANSI or equivalent International Standards

( 1piece as SALA recommend)

- Adequate anchor points anchor point to be available for connecting the lanyard and

Self-retracting fall arresting devices with full body harness. Anchor points will be positioned

independently from the movable stabbing board assembly.

- The stabbing board platform to be installed with one certified safety line,the safety line

will connect stabbging board with one padeye on Mast.

- Air winch on Casing stabbing board:

- Remote pendent control

- Control cord with emergency stop.

A.1.5. Mast Emergency Escape system - Qty : 1 set

- Mast Emergency Escape system with accessories and user manuals

- Mittelmann Mast emergency descent device RG 10D(EN standard)

- The models will be suitable as per the mast / monkey board height and as

per manufacturer recommendations.

- The PPE & accessories used in the system for emergency escape willl be

as per the manufacturer requirements, included Satey Harness and anchor block

A.1.6. Derrick Climbers Assist Lines - Qty : 3 set

- Derrick climbers assist lines(one each to monkey board & crown block) complete

with lines,certified snatch block. climber assistor, 3 sets.

A.1.7. Crown Block - Qty : 1 set

- Crown block rated for 1,500,000 lbs/750ton/6750KN static hook load capacity with :

- Seven (7) sheaves cluster of 1524mm(60 inch) sheaves;

- One(1)fast line sheaves 1524mm(60 inch);

- All grooved for φ42mm (1 5/8") drilling line;

- Confirming to API Spec.8C 5th Edition and API Spec 4F latest Edition, PSL1, SSL: E2 U2;

- To be API monogrammed, Possessing valid API-4F and 8C certificate.

- Two (2) 4t Hoist Blocks with secondary retention are used.

- Two(2) 12t Hoist Blocks with secondary retention are used.

- One (1) 25t Hoist Blocks with secondary retention are used.

A.2. Subbase and Associated Equipment - Qty : 1 set

A.2.1 Subbase :

- Rated for 1,500,000 lbs/750ton/6750KN casing load capacity simultaneous with

800,000 lb./400ton/3600KN setback capacity.

- Rig floor dimensions: 13m×14.8m/42.6ft×48.5ft

- To be API monogrammed, possessing valid API- 4F certificate.

- Confirmed to API 4F 4th edition, PSL1, SSL: E2 U2.

- Steel material

- Welding Procedure as per AWS.

- Drill floor height(from Ground to drill floor): 46.92ft/14.3m;

- Drill floor clear height(from bottom of rotary table beam to Ground): 42ft/12.8m;

- Sub base with clear height under BOP trolley beams：36ft/10.97m (from bottom of

BOP trolley beams to Ground).

- Substructure type: Sling shot.

- Two(2) Stairways for access from rig floor to ground level and One(1) Stairways

for access from rig floor to mud tanks.

- One(1) 2ft wide safety slide for emergency escape slide from rig floor to ground level.

- Equipped with two sets of buffer hydraulic cylinders, which can be used for

raising and lowering the substructure.

- One stand pipe vertical skid.

- One hanger frame for 2*1.5m³ air receiver.

- Structure to be installed at lower floor position. After mast raised, substructure

to be raised up with floor equipments by two(2) hydraulic winch which are included.

- With Substructure Raising Line Ø38mm（ 1 1/2"）L=325m

- With Rig floor dog house(one air conditioner included),1 set;

- With tool house,1 set.

- With 2 ea. SALA Self-retracting fall arresting devices with Derrick safety harness

with frontal pad to be installed under the Fix anchor point around BOP beams (15m).

- With 1 set Antiskid floor mats for the rig floor, only for main working area of rig floor.

(The area between the setback and drawworks , inside left and right mast leg.)

- With 1 set Drilling Bell nipples for 29-1/2" diverter, 18-3/4" Bops.& 12" Flow line.

A.2.2. A Secondary BOP Retention System - Qty : 1 set

A secondary BOP retention system below the sub-structure with safe rated

pad eyes along with accessories including but not limited to wire rope slings,

shackles, pins, chains, hooks etc for the holding the heaviest BOP stack

shall be in place to prevent BOP falls in case of failure of primary retention

system (BOP hoist) system during casing slip setting, casing cutting and

other activities.

A.2.3. Drip Pan System under Rig Floor - Qty : 1 set

- Drip pan system under Rig Floor.

- Rig floor to be sealed with all drainage from the rig floor contained in a drain

system for discharge to location.

A.2.4. The Safe Working Load (SWL)

The Safe Working Load (SWL) will be prominently marked for all Pad eyes on

Mast and Substructure

A.2.5. Mouse Holes - Qty : 1 ea

Mouse holes, 12" OD and 16" OD.

A.2.6. Mechanical Conventional Catwalk - Qty : 1 set

- Mechanical Conventional catwalk size:18000mm(L) ×1500mm(W) ×1070mm(H), two sections.

- Catwalk fitted with 2 each cementing lines & kill lines of 2"IDx 15 M, having slide/ sling gate at Rig .

- The kill line is only fixed under catwalk, and wont lay to ramp and drill floor.

- Cementing Lines and Kill Lines on Catwalk are made by Chinese vendor, as per API 16C;

- Valves on cementing lines and kill lines are from western brand vendor.

A.2.7. Pipe Rack - Qty : 10 pcs

- Triangle pipe rack, length 9000mm, height 1070mm, end with retaining pin

A.2.8. BOP Lifting Hoist System - Qty : 1 set

- BOP lifting hoist system, 150-ton capacity

- Trolley beams mounted on the substructure under the drilling floor with travel of the BOP

hoists is to cover the entire length of sub base.

- Max. hoisting capacity:2×75ton

- Max. hoisting height:4.8m

- Max. hoisting speed:0.6m/min

- Max. lowering speed:1.0m/min

- Max. horizontally travelling speed:6m/min

- Max. working pressure of hydraulic system:21Mpa

- Max. flow rate of hydraulic system:120L/min

- Wireline diameter:44mm

- With One (1) Hydraulic Power unit (Electrical Motor Drive) is used for substructure up/down & BOP

lifting hoist system

A.2.9. Hydraulic Power Unit for Hydraulic Tools - Qty : 1 set

- Hydraulic power unit For hydraulic tools

- Hydraulic unit complete with two (2) hydraulic pumps each driven by electric motors mounted

at derrick floor, for use with rig-floor auxiliary equipment.

- Max.pressure: 3000psi/21MPa

- Rated pressure: 2320psi/16MPa

- Rated output flow: 120L/min

- Effective volume: 1000L

- Main power input: 55kW x 2

A.2.10. Drilling Line Spool for drill line complete with air/hydraulic motor. - Qty : 1 set

- Model:DSJ45Q

- Output drum speed : 0~13r/min

- Output torque:14000N.m

- Max.working air pressure: 0.8Mpa

- Max.load: 20000kg

- Suit wireline:42mm( 1-5/8")×7500ft

A.3. Draw Works

A 3.1. AC Electric Draw Works

AC Electric Draw works - Qty : 1 set

- Rated for 2200KW(3000HP)input power;

- Nominal depth range up to 30,000 ft;

- Powered by two(2) 5GEB28, 1118kw/1500HP, 600V,Make: GE. With IECEX/ATEX

- Disk Brakes (PSK Model:PS295/6750D) on main drum as fail-safe emergency / parking brake.

- Standard Disc Brake System with air-cooled Discs, 6 x hydraulic service calipers,

4 x Spring-set safety calipers, independent hydraulic power station , and Control Console.

- Working brake torque:295kN.m,Parking release brake: 190kN.m,Emergency brake: 485kN.m

- Max. fastline pulling capacity:141,000lbs/640KN

- Pulling capacity - 1,500,000/6750 Static hook load@ 14 lines.

- Drum size:Φ915mm×1836mm,The drum is casting part with lebus grooved for 42mm( 1-5/8') wireline.

( welded,replacable after worn )

- The drum shaft is driven by two (2) sets of two-shift gear box.

Steps of speed: 2+2R(2 steps)

Gear Box ratio:High speed:8.056,Low speed:14.783

- Equipped with pneumatic toggle valve anti-collision device.

- Kinematics draw works brake monitor and control system (Crown saver and floor saver:This is refer to

Anti Collision System (ACS) Ingrated in VFD and Drillers Control - Cabinet system).

Crown saver / Crown-O-Matic, with emergency activator switch on Drillers console.

A 3.2. Auxiliary Brake System - Qty : 1 set

- AC –VFD Rig using regenerative braking, disc brake on main drum to be capable of being

used as Auxiliary brake which included in Item A.3.1

- Disk Brakes (PSK Model:PS295/6750D) on main drum as fail-safe emergency / parking brake.

- Standard Disc Brake System with air-cooled Discs, 6 × hydraulic service calipers,

4 × Spring-set safety calipers, independent hydraulic power station , and Control Console.

- Working brake torque:295kN.m,Parking release brake: 190kN.m,Emergency brake: 485kN.m

- Rated pressure of hydraulic disc brake operating system: 8 MPa

- Hydraulic power station of disc brake（Air cooling） Model:PY-01F

- Rated pressure : 8Mpa

- Rated to suit minimum static hook load capacity 1,500,000 lbs of draw works.

A 3.3. Electronic Automatic Drilling System - Qty : 1 set

- Electronic automatic drilling system

- Achieved by Seperater Motor control, integrated in VFD system.

- Electronic feed for draw works controls to provide ROP control based on constant ROP,

Weight on Bit., differential pump pressure and torque.

- Four alternative modes include :

- ROP----rate of penetration

- WOB----weight on bit

- MPP----mud pump pressure

- DPT----drill pipe torque

- WEG Auto bit driller motor Model:W22Xd-75kW-4-280S Fundamental frequency power: 75kW

- Fundamental frequency torque : 401 N.m

- Cooling type: Forced air cooling,

- Protection degree of motor : IP56, with IEC explosion-proof certification.

A 3.4. Makeup/Spinning Cathead - Qty : 1 set

- Makeup/Spinning Cathead(Telescope Type)

- Rated working pressure:2320psi/16MPa;

- Rated flow rate:120L/min;

- Wireline pulling force:350,000lb/ 160KN;

- Norminal rope stroke 1500mm

A 3.5. Breakout Cathead - Qty : 1 set

- Breakout Cathead(Telescope Type)

- Rated working pressure:2320psi/16MPa;

- Rated flow rate:120L/min;

- Wireline pulling force:350,000lb/ 160KN;

- Norminal rope stroke 1500mm

A4 Travelling Equipment

A4.1. Travelling Block 750-ton Capacity - Qty : 1 set

- Travelling Block 750-ton/6750KN capacity .

- Number of sheaves:7

- Sheave diameter:φ1524(60")

- Grooved for φ42mm(1-5/8') wireline.

- Conforming to API 8C 5th Edition PSL1

- To be API monogrammed, possessing valid API-8C certificate.

- With one(1)Hydraulic wireline cutter.

- Max. cutting diameter :48mm; Max.shearing force:20T;

- With six(6) Snake line for wireline stringing.

- Natural length 1600mm,Traction force 40KN.

A4.2. Weldless Elevator Links - Qty : 1 set

Weldless elevator links, 4-3/4" x 252", 750 ton capacity. Conforming to API 8C,PSL1

A4.3. Weldless Elevator Links - Qty : 1 set

Weldless elevator links, 3-1/2" x 144", 500 ton capacity. Conforming to API 8C,PSL1

A4.4. Weldless Elevator Links - Qty : 1 set

Weldless elevator links, 2-3/4" x 132", 350 ton capacity.Conforming to API 8C,PSL1

A4.5. Weldless Elevator Links - Qty : 1 set

Weldless elevator links, 2-3/4" x 252", 350 ton capacity. Conforming to API 8C,PSL1.

A4.6. Drilling Line - Qty : 7500ft

φ42mm(1-5/8') Drilling line to suit minimum static hook load capacity.

Right hand, as per API Spec.9A.

A.5. Rotary Group and Top Drive

A.5.1. 37-1/2” Rotary Table - Qty : 1 set

- Heavy Load 37-1/2" rotary table:

- Max.Static Load:7250KN;

- Rated Speed:300RPM;

- Gear Ratio:3.62;

- Max.torque:45000N·M(@0-110RPM);

- Make: BOMCO,holding valid API-7K certificate.

- Main AC Motor: 5GEB22A5, 858KW, 600V,Make: GE. With IECEX/ATEX

- Rotary table independent drive device:

- Reducer: i=1.6920

- Coupling: BJS435A

- Cardan shaft:BHJ350F530

- Inertia brake:5022A

A.5.2. Rotary Table Master Bushing and Insert Bowl - Qty : 1 ea

- Complete with a ZP375 master bushing (MPCH), with the following insert bowl:

- Split insert bowl # 1 (11-3/4" – 13-3/8"),1 pc

- Modified Split insert bowl # 1 (to handle 14"tubulars),1 pc

- Split insert bowl # 2 (9-5/8" – 10-3/4"),1 pc

- Split insert bowl # 3 (2-3/8" – 8-5/8"),1 pc

- Lifting hook for removing and installing bushings and bowls( 2 hooks for bowls,4 hooks for bushing).

A.5.3. Casing Bushing - Qty : 1 ea

- Casing bushing, split type for 30",24" and 18-5/8" casing.

A.5.4. False Rotary Table - Qty : 1 set

- False rotary table suitable for running 5-1/2" drill pipe string inside 30" ,24" and 18-5/8" Casing.

- Rated load capacity 200 tons.

A.5.5. Electrical AC or DC powered Top Drive System - Qty : 1 set

- Electrical AC powered Top Drive System

- Model DQ90BS-JH

- Rated Hoisting capacity 750 tons.

- Power Supply 600VAC/50Hz

- Main Motor Rated Power 2X450KW(continuous)

- Drilling Torque 76KN·m

- Max. Break-out Torque 120KN·m

- Rotary Speed 0～220r/min

- Backup Tong Range φ87mm～φ230mm

- Mud Circulating ID Φ89mm

- Equipped with top drive body, top drive guide rail, top drive travelling cable, top drive

VFD room, driller control console.

B Mud System

B.1. High Pressure Mud System

B.1.1. Triplex Mud Pump Unit - Qty : 3 sets

- Triplex Mud Pump, Rated input 1600 HP

- Model ·F-1600HL

- Rated power：1600HP

- Rated stroke：120spm

- Stroke length : 12"

- Ratio：4.206:1

- Max. working pressure：52Mpa

- Valve cavity：API 7#

- Max. liner size：7"

- Inlet flange：12" (305mm)

- Outlet flange：5 1/8"

- Shear pin type safety valve：JA-3

- AC motor

- Qty.: 1 pc for each pump

- Rated power:1200kW

- Rated voltage:600V

- Explosion proof standard: CNEX

B.1.2. WP Rotary Hose - Qty : 2 pcs

- ·4" ID x 75ft long x 7500 psi WP rotary hose,FSL Level 2,-20°C ~ 82°C, in accordance with API 7K

B.1.3. WP Bumper Hoses - Qty : 7 pcs

- ·4" ID x 15ft long x 7500 psi WP bumper hoses ,FSL Level 2,-20°C ~82°C, in accordance with API 7K

B.1.4. WP Dual Stand Pipe Manifold - Qty : 1 set

- 5"ID x 7500 psi WP dual stand pipe manifold with 5" ID 7500 psi WP full opening gate

values feeding with 2 independent 5" x 7500 psi WP mud pump discharge lines coming

from a mud pump discharge manifold. Mud pump Discharge manifold 7500 psi WP,

to be designed so that any of the 3 pumps can be lined up for 2 mud lines to sub base.

- 2" x 7500 psi valves from manifold to upper kill line, lower kill line, cellar jet and one

for displacing cement, or other general circulating from rig floor level.

- 2" x 7500 psi working pressure steel line with designated valve from rig floor

to choke manifold for reverse circulating.

- Gate valve adopts welding valve.

- Stand pipe manifold include five(5) nos 5" gate valves and nine(9) 2" gate valve.

Ground HP manifold include ten(10) nos 5" gate valves and one(1) 2" gate valve.

- Gate valve will be from Demco, Union will be from Kemper

B2. Low Pressure - Mud Pump

Design Principals for Mud System

Mud Tank System :

• Mud system total capacity 4990 Bbl (usable) with active Mud system capacity:

1990 Bbls and reserve tanks of 3000 Bbls.

The volume of tanks calculate decrease 150 mm from the top surface of Tanks.

• All the solid control equipments sized for handling 1500 GPM mud.

• Capable of handling mud up to 21 ppg.

• All reserve pits are to be connected to the mixing system so that mud can be

transferred and treated in any pit independently

• As much as practical, tanks to have no internal piping or obstructions.

Only suction pipe, mud guns, equalisers and dump valves will enter the tank.

Suction and Discharge lines to be run from all tanks for flexibility and rapid

weight and for lining up as active tanks.

• Double deck top for tanks（ except shale shaker tank I Or a safe walkway

to eliminate piping or other obstructions on top deck. Sufficient service gates

in top deck. Piping to be kept below grating.

• Mud trough sized for 1500 GPM（Mud trough on top of tank and below double deck）

• Where possible all valves to be outside the tanks and/or above mud level.

All valve operators or handles to be below the grating level.

• All tanks to have 42" handrails.

• All tank compartments to have knife dumps and bottom feed to dump header.

• All tanks to have fixed, overhead sunshade cover with mist system

coving all mud system area.

• All suction valves on the mud tanks will be accessible from the surface for repairs

and contain high quality sealing components that are oil based mud compatible.

• All the motors and control units to be explosion proof type

• One mud duty room is installed on the tank.

Low pressure mud system, Butterfly Valves and Unions.

B2.1. Centrifugal Pump - Qty : 11 set

- 6" x 8"-14 centrifugal pump with 75KW Explosion proof AC motor

B2.2. Centrifugal Pump - Qty : 4 set

- 2"×3"-13 centrifugal pump with 11KW Explosion proof AC motor

- Two(2) for trip tank, Two(2) for water cooling tank.

B2.3. Mud Processing /Treatment - Qty : 35 set

• Mud Agitators :

Impellar size 1140mm, Power 18.5KW, Qty 6 pcs

Impellar size 1040mm, Power 15KW, Qty 27 pcs

Impellar size 960mm, Power 11KW, Qty 1 pc

Impellar size 500mm, Power 2.2KW, Qty 1 pcs

B2.4. Mud Tanks

- Flat Bottom Tank, with slanted internal bottom.

B.2.4.1 Shaker Tank I - Qty : 1 set

- Shaker Tank I comprising of the following pit compartments :

a) Sand trap: 100 bbls. Capacity with provision for long tapered dump

B.2.4.2 Shaker Tank II - Qty : 1 set

- Shaker Tank II comprising of the following pit compartments :

a) De-sander /Degasser tank - 200 bbl. capacity.

b) De-silter pit - 200 bbl. capacity.

B.2.4.3 Intermediate Tank - Qty : 1 set

- Intermediate Tank comprising of the following compartments :

Compartment 1- 240 bbl.

Compartment 2 - 300 bbl.

B.2.4.4 Suction Tank - Qty : 1 set

- Suction Tank - 500 bbl. Tank is partitioned in two equal size compartment.

B.2.4.5 Mixing Tank - Qty : 1 set

- Mixing Tank comprising of the following compartments:

- Mix/Premix Tank for mixing -150 bbl.

- Mix/Premix Tank for mixing -200 bbl.

- Pill/Slug Tank -100 bbl.

B.2.4.6 Mud Reserve Tank - Qty : 1 set

- Mud reserve storage tanks, each of 500 bbl. capacities.

- Each tank divided into two (2) Compartments, each of 250 bbl.

B.2.4.7 Trip Tank& Water Cooling Tank - Qty : 1 set

Trip Tank& Water cooling tank are installed on the one skid. Trip tank - 120 bbl. capacity.

There are two compartments, each compartment is 60 bbl. 20m³ Water cooling tank

is used for drawworks gearbox, rotary gearbox, etc.

B.2.5. Shale Shaker

B.2.5.1 : Flow Dividers to the 4 shale shakers and 1 combo type shale shaker

with flow bypass. Flow Divider box to be capable to handle 1500 GPM of flow. - Qty : 1 set

B.2.5.2 :

- Derrick Hyperpool / 4-Panel High "G"

- Linear motion Shale shakers powered with vibrating motors that produces

High G – 8 G force and with 4 panels with top feeding wiers . Along with

API-RP-13 C complaint replacement Screens (80 to 325 mesh sizes) to be

suitable for flow line temperature up to 200° F.

- Qty : 4 sets

B.2.5.3 : Screens type – Pyramid - Qty : 1 lot

Screen Size : 80 , Qty : 20

Screen Size : 100 , Qty : 20

Screen Size : 120 , Qty : 20

Screen Size : 140 , Qty : 40

Screen Size : 170 , Qty : 40

Screen Size : 200 , Qty : 40

Screen Size : 230 , Qty : 40

Screen Size : 270 , Qty : 40

Screen Size : 325 , Qty : 20

B.2.6 Mud Cleaner - Qty : 1 set

- Hyperpool / 4-Panel High "G" Combo type Linear motion shale shaker of same

model as above shakers with combination of de sander and de silter on top .

(Combo type) to be lined up as 5th shale shaker) along with replacement

screens of above sizes. Desander and Desilter will be capable of handling

1500 gpm of mud.

- Three (3)-10" Desander Cones

- Twenty (20)-4" Desilter Cones

B.2.7 High Pressure low volume wash gun and mud ditch magnet at shakers - Qty : 1 ea

B.2.8 Decanting Centrifuge - Qty : 2 sets

- Variable Frequency Drive Centrifuge

- 50 horsepower (37kw/60HZ/460V) – Main Drive

- 20 horsepower (15kw) – Back Drive

- With feed pump,10HP/460V/60HZ

B.2.9 Degasser - Qty : 1 set

- Derrick Vacu-Flo for handling 1200 GPM.

B.2.10 Mud Gas Separator - Qty : 1

- Mud Gas Separator

- “Poor Buoy” vertical mounted mud gas separator, 48” OD x 15ft high with 6” OD inlet

from choke manifold, 10” OD return line to shale shakers with mud seal of 15 ft 8” OD

vent line, 6” OD drain and all necessary piping to connect to choke manifold,

shale shaker tank and flare line.

- Detail information :

Type:HMGS1200-1.0A

Vessel dia.:1200m

Working pressure: 1.0MPa

Flow capacity:300~350m³/h

liquid inlet:DN150

liquid discharge outlet:DN250

With ignition device &70m flare line.

- To be certified by third party as per ASME

B.2.11 14"Augers - Qty : 3 sets

- 14"Augers– to carry cuttings from centrifuge, shakers &Desander/ Desilter to

mud cutting waste pits eliminating water-jetting.

B.2.12 Mud Hoppers

B.2.12.1 Mud Shearing / Mixing / Blending Integrated system (Lobestar from Vortex Venture) - Qty : 2 sets

- Mud Shearing / Mixing / Blending Integrated system (Lobestar from Vortex Venture ),

complete, incorporating shear flow loops, mixing hopper and blending manifold.

Flow rate of 1000 GPM each, 2000GPM in total.

B.2.12.2 6" mud mixer hoppers with 6" Venturi. - Qty : 2 sets

- Treatment Capacity:(200m3/h),

- Bore of inlet:6",Bore of outlet:6";

- Inlet pressure:0.3-0.6Mpa,Outlet pressure:0.1-0.2Mpa;

- Nozzle diameter:2"(50mm);

B.2.12.3 Hopper skid - Qty : 1 set

- Hopper skid has capacity to accommodate- four (4) Hoppers,

- Mud dock for material storage.

- Use the second floor of hopper skid as mud dock.

- Mud dock for material storage with jib crane capable to load chemical bags on all Hoppers .

- Air crane, Rated load: 3t , hositing height:6m

B.2.13 Mud Silo Table - Qty : 1 set

- Suitable stand / framework for installation of Deck Silos / Hammer Bins

- An indicative drawing of the Mud silo is enclosed.

B.2.14 Cellar jet - Qty : 1 ea

- Cellar jet constructed of 6" OD pipe with 2" NPT x 3/4" orifice jet nozzle nipple installed

in 90° long radius ell. 6" line runs from cellar bottom to mud tank with outlets to shale

shaker and reserve/waste pit. Fluid is supplied to jet nozzle by 2" high pressure line

from stand pipe discharge manifold.

- With one FLYGT Submersible electrical explosion proof type pump,HT454 20HP added hose

C Power Package

C.1 Generator sets : - Qty : 7 sets

Model: CAT3512B+SR4B,7sets

Engine power: CAT3512B，1101 bkW@1200 RPM

Generator sets: SR4B, 600V/60HZ, 980EKW c/w fan.

Totally 8 sets, generator houses included.

C.2 Auxilliary Generator - Qty : 1 set

Model: CAT C18

480V/60HZ, 545KW c/w fan.

C.3 Rig VFD system - Qty : 1 set

- VFD system.

- Equipped with A/C control system, motor control panel, generator control equipment

and lighting panel, all located in air-conditioned control room with suitable roof mounted AC units.

C.4 WellSite Ex-proof circuit and lighting - Qty : 1 lot

- WellSite Ex-proof circuit and lighting

- Rated Voltage:600V/110V

- Rated frequency: 60Hz;

- UL/IEC/ATEX/CNEX explosion-proof standard.

- Explosion-proof requirement:The Ex e or Ex d explosion proof is used for the drilling floor area.

- Distribution Box and Magnetic Starter Box

- Lightings(Flourescent type)

- Cables (Exane or equivalent)

- Plus and socket

- Cable tray（including grasshopper and folding cable tray）.

- Includes the cable tray from VFD to solid control area, mud pump area,

drilling floor area (including the mast), and generator houses and to other support equipment.

D Rig Instrumentation, Control and Automation

D.1 Drillers Cabin cum Dog House - Qty : 1 set

- The cabin’s walls and the console are made of 304 stainless steel.

The main frame and base are made of carbon steel. The middle of the wall

insulation filling rock wool,well insulated.

- Dog house and cabin dimensions is 2750mm(W)x 7500mm（L）x 2950mm(H

)with attached cabin of 2700×2750mm.

- DCC designed to allow for ergonomics,positioned above the floor level

with safety windows with wiper system to allow clear view of the rig floor.

Have a good sight of mud pumps, monkey board and drawworks.

The windows are provided with safety nets and security bars. The glass

shall be made from Bullet-proof glass.

- The Drillers Cabin will have typical instrumentation/ equipment as listed below:

- Equipped with driller`s integrated chair. The drawworks operation and main

operation of Top drive can be realized on the driller chair and SIMATIC HMI.

- Draw works Joystick Controls,Top Drive Control.Drilling instruments and CCTV.

- One Ex-proof emergency lights .One Ex-proof power switch box.

- Drillers cabin equiped with two sets of HVAC (Top mounted) which

refrigerating capacity about 7kW. Doghouse equiped with two window

Air Conditioner which refrigerating capacity about 5kW.

- Ex telephones. Rig alarm horns, fire extinguisher.

- All plugs and receptacles for console connection.

- All operations are controlled from the Drillers Cabin.

D.2 Closed Circuit Television system (CCTV) - Qty : 1 set

- Closed Circuit Television system (CCTV) with recording and storage capabilities

for 2 wells backup data(24months),colour remote control camera system at

below the Crown block, Monkey Board, stabbing board and under sub

structure(all rotating camera,all explosion-proof type), with explosion proof

monitor(one display screen with four pictures) and controls at Drillers console.

and two monitors in both rig supervisor and toolpusher cabins.

- Working temperature:-30~60℃;

- Relative humidity:0-90%RH;

- Working voltage:120V-260V,47HZ-63HZ;

- The CCTV system consists of camera unit,controller,display screen,keyboard,

connecting cables.

D.3 Rig Instrumentation System - Qty : 1 set

- Electronic, Computer controlled rig instrumentation system,

MD Totco- Rig Sense3.21 control systems, incorporating real-time

data acquisition for usage at rig, display and logging of all rig, pump pressure,

mud flow and volume information and alarm systems.

- Instrumentation system to be equipped with both Analog and Digital displays.

- Analog display is refer to Weight Indicator,pressure gause,etc.

- Suitable for area classification Class-1-Div-1.

- The system will provide for hard copy record of daily parameters and electronic

database storage and retrieval of data to common Windows based computer systems.

- System to cover the requirements under H.2.a to H 2.c through one system.

D.3.1 The system will provide for hard copy record of daily parameters and

electronic database storage and retrieval of data to common Windows based

computer systems.

D.3.2 The system will include the following measurements :

• Drilling Torque, Top Drive and Rotary

• Rotation speed, Top Drive and Rotary

• Tong line pull

• Mud Pumps; each pump & total all pumps

• Pump speed

• Pump strokes

• Total strokes

• Standpipe pressures

• Choke Manifold pressures

• Kill Line Pressure

D.3.3 MD Totco HMI as pit level (total 23nos mud leval sensors )and flow show

monitor system with alarm device complete with the following features :

• Total pit volume and individual tank volume for all active , mixing and reserve pits.

• Trip tank volume.

• Mud pit gain or loss in bbls.

• Mud flow as percentage of total flow.

• S. P. M. and continuous strokes for each mud pumps.

• Electronic digital monitoring/hard copy printout recording system for total volume and flow line

D.3.4 Will have Alarm Systems for

• Active Pit Level

• Mud return flow rate alarms; High/Low

• Rate of Penetration; High

• Pump Pressure; High/Low

D.3.5 The rig control system will be capable of automatic control of the following :

• Block Speed while running drill pipe, casing, tubing, etc., to rated maximum load.

• Block Proximity Limits; Crown & Floor

• Top Drive/Rotary Torque

D.3.6 Penetration rate while drilling, reaming, etc., based on;

• Bit Weight

• Pump Pressure differential. and

• ROP limits

• Torque

D.3.7 Data Monitor System

- Data Display Monitors, independently configured, networked to data storage

system for real time or achieved display of all rig data, with graphical, analogue and

numerical display options :

• 1 Drillers Console（HMI)

• 1 Drillers Doghouse(HMI）

• 1 Contractors Office(Rigsens cilinet）

• 1 Operators Area Supervisor Office（Rigsens cilinet）

• 1 Operators Rig Site Supervisor Office（rigsense server）

• 1 Mud Lab（LCD Screen）

D.3.8 Data printer systems for hard copy data record, configurable for digital or

graphical output based on time or depth.

D.3.9 Data printer/recorder system dedicated to real time, 24 hour, continuous,

8 channel, graphical hard copy recording of critical rig data including;

• Hook Load

• Rate of Penetration

• Top Drive/Rotary Speed

• Top Drive/Rotary Torque

D.4 Deadline Anchor - Qty : 1 set

- Deadline Anchor JZG72E

- Max. deadline pulling force: 720KN;

- Output Pressure 9Mpa

- Output Pressure Error: ±1.0% FS

- Suit for M/D E551 Sensor

- With the MD Totco sensator and weight indicator.

D.5 Rig Intercom & Public Address System - Qty : 1 set

- Rig Intercom & Public Address System; Stations at all Operators Offices,

Mechanic Office, Senior Toolpushers Office, Drillers Console, Drillers dog house

Shale Shaker w/hood, Mud Tanks, VFD Cabin, Mud Loggers Cabin, End of

Catwalk for Cement Unit, Mud Engineer Lab, MWD unit, monkey board,

choke panel, and two spare units.

- Explosion proof suitable for use in Hazardous areas and to withstand harsh

effects of environment

- Total of 17 stations required.

- Manufacturer Gaitronics

D.6 Rig Paging System - Qty : 1 set

Rig Paging System : For recording (the recording should be at lest 30days

and be shared by the contractor.) the instructions passed between Driller

and Tool Pusher or between Company Man and Tool Pusher. Explosion proof

suitable for use in Hazardous areas and to withstand harsh effects of environment.

Manufacturer : Gai-Tronics USA

E Auxiliary Rig Equipment

E.1 Hoists

E.1.1 Rig Floor Winch - Qty : 3 sets

- Hoist, 10,000 lbs, one (2) located at drill floor, one (1) located at the end of catwalk.

Specification :

- Air pressure :116psi/0.8MPa;

- Max. pulling force :10,000 lbs/5T;

- Rope capacity :120m;

- Wireline Dia. :Ø20mm（3/4")

E.1.2 Winch - Qty : 1 set

- Hoist, 20,000 lbs, located at drill floor on driller side for Drill Collars/ Heavy lifts.

Specification :

- Max. lifting capacity:100KN

- Max. rope speed:20m/min

- Rated power:30KW

- Rated air inlet pressure:0.8MPa

- Rated air consumption:24m3/min

- Rope capacity:120m

- Wireline diameter:24mm

E.1.3 Man Rider Winch - Qty : 2 sets

- Winch on rig floor, 330lbs/150 Kg capacity, Certified Man rider includes

external relief valve,operating valve, and testing ports.

- All on rig floor.

- Will be fail safe system.

- Man Rider Line Pull Rating: 330 lbs. (150 kg) on 2nd layer

- Man Rider Line Speed: Variable, 0 - 98 fpm (30 m/min) on 2nd layer

- Wire Rope Storage Capacity: 505 feet (154 m) with 7/16 inch (10mm) dia.

wire rope on 5 layers

- ATEX Compliance: Standard. Includes drum guard, overload protection,

emergency stop, limit switch, muffler and ATEX marking.

- Testing : Standard load test to 180% SWL

- Pressure: 75 psig (5 bar) – 105 (7 bar) at the air inlet (dynamic)

- Flow: 88 cfm (2.5 m3/min)

- 1ea on Rig floor and 1ea in Subbase

E.1.4 Racking Board Winch - Qty : 1 set

- 1-Tonne Utility Air Winch for Racking Board with remote operator pendant to function.

E.2 Air Compressors

E.2.1 Air Compressors - Qty : 3 sets

- Air Compressors for 535 CFM at 145 psi/1MPa each equipped with dual controls,

including pipes valve fitting and two air receiver tanks of 600 gallons.

- Discharge Capacity: 535CFM(15.15m3/min)

- Rated Discharge Pressure:145psi(1.0MPa)

- Max.Working Pressure:154psi(1.06MPa)

- Cooling Type:Air cooling

- Max.Ambient Temperature:55℃

- Max.Dischage tepemerature:55℃+8~15℃

- Motor:90kW

- Air tank):four(4) total

- Two(2) 2.5m3 in Air house,two(2) 1.5m3 under sub-base

E.2.2 Air Dryer - Qty : 1 set

- Air Dryer to suit the air supply capacity of two air compressors working and one for spare.

- Model ； HD-25HTF, capacity: 27m3/min

- C/W one prepositive filter and one postpositive filter.

E.2.3 Auxiliary Air Compressors - Qty : 1 set

- Quincy QT-7.5 Air Compressor –150 psi, driven by diesel engine for cold start application.

Features :

ACFM @ 175 psig: 22.0

RPM: 990

E.3 Water, Oil and Fuel System

E.3.1 Drill water Storage tank - Qty : 5 sets

- Drill water Storage tank 500 bbl each

- Flat bottom,Top Opened

- 2 pcs of Centrifugal pump included, 600V,60HZ

E.3.2 Four compartment oil lubster for storage of oil lubricants - Qty : 1 set

E.3.3 450 bbl Diesel Fuel Tank - Qty : 1 set

- 450 bbl diesel fuel tank complete with circulating and filtration system for rig

engines and two (2) 1-1/2" x 2" transfer pumps. Double skin and level indicator .

E.3.4 450 bbl. Mud-Diesel Storage Tanks - Qty : 2 sets

- 450 bbl. mud-diesel storage tanks. 2 pcs

- Fuel storage tank with doubled walled type construction.

The storage tanks will be fitted with :

• Level indicators to know the volume of the contents in the tank.

• Air breather with flash back arrestor

• Over flow line

• Access/egress ladder

• 1set 3" x 4" mud diesel transfer pump for two mud-diesel storage tanks.

E.4 Rig Floor Tools

E.4.1 General Assembly Parts - Qty : 1 set

Air winch support, location block for generator house, guard rail, rotary table

cover plate, air tank bracket, mud umbrella, etc.

E.4.2 Hydraulic Wire Cutter - Qty : 1 pc

• Max. cutting diameter :48mm;

• Max.shearing force:20T;

E.4.3 Hydraulic Jack - Qty : 2 ea

30T，50T，100T

E.4.4 Wireline Stringing Unit : Ф42 - Qty : 6 pcs

3000HP Electric Deep Drilling Rig - For Sale

ID 2891

Worldoils Marketplace

Worldrigs ID: WR2626

Cooper Drilling Rig for Sale
Drilling Rig - Cooper 350 Hp - For Sale

Description :

General Description :
Make : Cooper
Estimated Drilling Depth : 5,000ft
Estimated Rig Move Loads : 38
Estimated Camp Move Loads : 35
Rated HP : 350

Mast :
Height : 104.00ft
Static Hook Load Capacity : 176,000lbs
Mast Racking Capacity : 3,600ft

Substructure :
Style : Telescoping
Height : 12.92 ft
Clear Height : 9.82 ft
Clasing Capacity : 176,000lbs
Maximum Setback Load : 132,00lbs

Drawworks :
Make : Cooper
Model : 4210-3808
Power Rating : 350 hp

Input Power :

1ea

Caterpilla
D 3406
Drilling Line Size : 1"

Auxillary Brake :

Parmac 122

D631974-X

Top Drive / Power Swivel :
No Top Drive

Swivel :
Make : Upetron
Model : CH 125
Capacity : 125 Ton

Rotary Table :
Make : Ideco 17.5
Table Opening : 17 ?2"
Maximum Load Rating : 150 Ton

Power Generation : Mechanical Rig

Mud System :

Mud Pumps :

1 ea

Gardner Denver
1PY-172
Power Rating : 1000hp @ 130 rpm
Pressure Rating : 5,000 psi
Active Mud Volume : 906 bbls
Reserve Mud Volume : 101bbls
Shale Shakers : 1 ea Upetrom
Mud Cleaner : N / A

Cooper Drilling Rig for Sale

ID 2626

MD Cowan Trailer Mounted Drilling Rig for Sale

Worldoils Marketplace

Worldrigs ID: WR2621

MD Cowan Trailer Mounted Drilling Rig for Sale

1000hp MD Cowan Trailer Mounted Drilling Rig - 2009 Built

Description :

General Description :
Make : MD Cowan
Year built / rebuilt : 2009
Est. Drilling Depth : 10,000 ft
Estimated Rig Move Loads : 30
Estimated Camp Move Loads : 3
Rated HP : 550

Mast :
Height : 72 ft
SHL Load Capacity : 500,000lbs
Mast Racking Capacity : Lay down

Substructure :
Style : Box
Height : 14.80 ft
Clear Height : 10.60 ft
Casing Capacity : 500,000lbs

Drawworks :
Make : Rig Tech
Power Rating : 1000 hp
Input Power : 1 Cat C15
Brake type : Band
Drilling Line Size : 1 -1/8"
Auxillary Brake : Eaton AirFlex
WCBD

Top Drive :
Make : Venture Tech
Model : XK-250
Capacity : 250 Ton

Power Generation :
Engines : 1 Cat C-15
Generators : 1 ea Cat SR 4 B

Mud System :

Mud pumps :

2 Hong Hua

HHF-1000
1000 HP @140 SPM
Model : RT 400B
Pressure Rating : 5,000 psi
Active Mud : 700 bbls

Shale Shakers :

2 es Derrick FLC 504

10"x 3 Cones
Mud Cleaner : N/A
Desander : Derrick

Desilter :

Derrick

4"x 16 Cones

Well Control :

6 Station 3,000 psi

Enhancements :
Fork Lift : Caterpillar 930 H

Iron Roughneck :

Blohm & Voss

MD Cowan Trailer Mounted Drilling Rig for Sale

ID 2621

Worldoils Marketplace

Worldrigs ID: WR118

ZJ40 Land Rig for Sale - 1000hp
Self Propelled Drilling Rig for Sale
1000hp Land Drilling Rig

Technical Specifications
Structure type : Self propelled and truck mounted
Drilling depth : 3200 mtrs with 5” x 25.6 ppf nominal weight, Range II DP
Static hook load : API static load capacity 250 MT with 10 line strung to traveling block
Power Engine : 630 HP X 2
Drawworks horsepower : 1000 hp (input)
Gears, drawworks : 5 forward, 1 reverse

Traveling system : 5 x 6
Drive type, carrier : 14x10
Dia., wireline : φ32mm
Mast height : 39.3 mtrs , compatible for Top Drive operation
Monkey Board height : Adjustable, customer to be specified the require adjustable range
Rotary table opening : 27.5”
Gears, rotary table : 5 forward, 5 reverse

Drill floor height : 6.7 mts
Min. turning diameter : 22 m
Ground clearance : 340mm
Max. Gradient : 26%
Max speed : 60km/h (Limiting speed: 45km/h)

Traveling dimensions : as per the roading dimension with mast in colleps condition
Traveling weight : 83500kg(with mast)
Ambient temperature : -29 ˚C～ +50 ˚C

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
1000hp Drilling Rig for Sale
ZJ40 Self Propelled Drilling Rig for Sale
Truck Mounted Land Drilling Rig - 1000HP
Land Drilling Rig for Sale
1000hp Self Propelled and Truck Mounted Drilling Rig
ZJ40 1000hp Drilling Rig
---------------------------------------------------------------------------------------------------------

Drilling Rig - ZJ40 Truck Mounted For Sale - 1000hp

ID 118

Featured equipments for sale

Worldoils Marketplace

Worldrigs ID: WR2761

National 5C Workover Rig
500HP Workover Rig for sale

General information
Single Drum D500 Drawworks with 1” drill line
104’ x 250,000# Derrick with rods & tubing racking boards
Detroit Diesel Series 60, 500 HP engine
Allison M5610H Transmission with drop box
Traveling Block, Ideco DS110, slotted speed kit design, 3 sheaves, 110 ton

Foundation, steel scissor beam on 3” x 12” timbers
Disc Assist Brake, Model 37.5 mounted at the drum
Tong, Gill Model 500 with back up head
Blowout Preventer, Townsend Type 81, 7-1/16”x 5000 psi. double stack
Stripper Head, Hall style 1500 psi.

Tubing Slips, Guiberson 60 ton, air operated
Rod Elevators, 5/8” to 1”
Tubing Elevators, 2-3/8” to 2-7/8” EUE
Wash Swivel, King 53GA
Hand tools

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------
Search words (for official use only) :
National 5C Workover Rig for Sale
500HP National 5C Workover Rig
Workover Rig for sale
Land Drilling Rig - For Sale
Workover Rig - National 5C - For Sale
500HP Workover Rig for sale
-----------------------------------------------------------------

500HP National 5C Workover Rig for Sale

ID 2761

Skytop Brewster Model TR-800 Drilling Rig

Worldoils Marketplace

Worldrigs ID: WR2762

Skytop Brewster Model TR-800
Reconditioned 900HP Trailer Mounted Drilling Rig

Specifications
Drawworks
Reconditioned Model H14610-38 Dwks - S/N 178,
Clutch - Twin disc Model P0-230 AND PO-234,
Brakes - 46 X 10, New drum grooved for 1 1/8" drill
line (includes 3000 ft 1 1/8" 6X19 IWRC IPS drill line)

Sand Line Drum
Twin reconditioned twin disc Model PO-224,
Brakes 38 x 8 (includes 15,000 feet 9/16" new sandline)

Hydromatic Brake
New WWL V-80 hydromatic water assist brake

Compound
Rebuilt Skytop Brewster

Engines
Factory Detroit Diesel Model 60 Series rated at 475 hp each
@2100rpm

Transmission
Factory Allison Model CLT-5860-4 (5 speed)

Mast
Recertificed by Nove - 115ft clear working height - 410,000
#Telescoping Mast, Number of lines to block 8, API operating
hook load is 388,000 lbs, drill line size 1 1/8", Racking board
height 55ft, 58ft, or 70ft, Racking board capacity 10,080 ft -
4 1/2" drill pipe (doubles)

(Mast includes new crownomatic emergency stop system, also includes
stand pipe with gooseneck union and 4" 5000 psi gate valves, also
includes new geronimo derrick escape device with wireline/clamps
and anchor) - Mast is complete with category 4 repair and has OEM mfg.
certificate of repair and inspection.

New Crown Block
Certified by Nov - Crown block is set up for an 8 line string up. Crown
sheaves are grooved 1 1/8". All sheaves are mounted on tapered roller
bearings w/grease zerts. Crown includes (1) 42" fast line sheave and 3
ea 30" cross over sheaves, one dead man. New crownomatic installed.

Reconditioned Dead Line Anchor
Following items are new on carrier :
Suspension 100,000# Total axle and suspension along with tag axle.
Tires and rims are 10:00 x 20 "Desert Tread", Main hydraulic reservoir,
Hyd cylinder controls, drillers console w/hose bundle, air hyd hoses and
steel lines, telescoping cylinders, raising cylinders, mast locking cylinder,
hyd jack cylinders (4), Manual jacks (2), all new jack stands.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

------------------------------------------------------------------------
Search words (for official use only) :
Skytop Brewster Model TR-800 Drilling Rig
900HP Reconditioned Trailer Mounted Rig for sale
Trailer Mounted Drilling Rig for Sale
900HP Skytop Brewster Model TR-800 Drilling Rig
Land Drilling Rig for Sale
Used Trailer Mounted Drilling Rig for sale
------------------------------------------------------------------------

Reconditioned Skytop Brewster Model TR-800 Drilling Rig

ID 2762

Worldoils Marketplace

Worldrigs ID: WR2763

1500HP Lewco/Cameron LDW 750K Rig
Used Land Drilling Rig for Sale

Specifications
Drawworks
Lewco/Cameron LDW 750K 1500 HP , Low low rated 648,000#,
single line pull, w/10 lines, w/2 AC 1150 input, gear drive. Hydraulic
Actuated, Parking disc brake, 1 3/8” wirerope 6x19 IWRC.

Prime Power
Omron/IDE 4 VFD System, (3) Cat 3512’s with Kato 1365KW AC Generators.

Auxillary
Cold start air system, primary rig air supply, floor hoisting systems.

Mast/Substructure
DSI 152’, 750,000# hook load, with 12 lines strung, Singshot design,
500,000# setback, Crown block (6) 50” sheaves 1 3/8” groove,
Fastline (1) 60” 1 3/8” grooved.

Top Drive/Traveling Block/Pipe Handling
CanRig 1250 500Ton AC Top Drive, American Block B60F500 Block,
RT 275, 27 ½” Rotary w/400HP AC input.

Mud Pumps
(2) Lewco WH-1612 1600HP, 5,000psi, each driven by (2)
1150HP AC input motors.

Mud System
(2) tank system, 1200 bbl capacity, (2) Swaco Mongoose shale
shakers, 6-Oil Works 15HP agitators, Derrick desander 2 12”
cones with 5x6 centrifugal driven by 100 HP electric motor,
NOV Derrick desilter 12 4” cones with 6x8 centrifugal driven by
100 HP electric motor, NOV Derrick Vaccu Flow 1200
Degasser, 48 x 20 gas buster.

BOP Equipment
13 5/8” 5000# annular, 13 5/8” 5000# double ram, 3000 PSI
accumulator, 120 gal, 5 station with remote, 4 1/16” 5000# x 2 1/16”
5000# choke manifold.

Fuel Tank : 18,000 gal

Water Tank : 500 bbl

Auxiliary
Deadline Anchor, Weight indicator, Pump SPM and PSI,
manual Tongs, elevators, slips and clamps

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

------------------------------------------------------------------------
Search words (for official use only) :
1500HP Lewco/Cameron LDW 750K Rig
Used Land Drilling Rig for Sale
Land Rig - Lewco/Cameron LDW 750K - For Sale
Used Rig - 1500HP - For Sale
------------------------------------------------------------------------

1500HP Lewco/Cameron LDW 750K Rig

ID 2763

Worldoils Marketplace

Worldrigs ID: WR2759

Ideco Rambler Workover Rig for sale
1984 Built Ideco Rambler Rig for Sale

1984 Ideco Rambler Rig, Model BIR-3185 Five Axle Carrier

Specifications
Single Drum H-35 Drawworks with 1” drill line
96’ x 215,000# Ideco Derrick with rods & tubing racking boards
Detroit Diesel Series 60, 475 HP engine
Traveling Block, Ideco DS110, slotted speed kit design, 2 sheaves, 110 ton

Foundation, iron stands on 3” x 12” timbers
Allison CLT5860 Transmission
Hydromatic Brake, 15” double rotor with water tank
Tong, Gill Model 500 with back up head
Blowout Preventer, Townsend Type 81, 7-1/16” x 5000 psi. double stack
Stripper Head, Hall style 1500 psi.

Tubing Slips, Guiberson 60 ton air operated
Rod Elevators, 5/8” to 1”
Tubing Elevators, 2-3/8” to 2-7/8” EUE
Wash Swivel, King 53GA
Hand Tools

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------
Search words (for official use only) :
Ideco Rambler Workover Rig for sale
1984 Built Ideco Rambler Rig for Sale
BIR-3185 Five Axle Carrier Rig for Sale
Ideco Rambler Rig - Model BIR-3185 - For Sale
Workover Rig - 1984 Built - For Sale
Land Drilling Rig for Sale
-----------------------------------------------------------------

Ideco Rambler Workover Rig for sale

ID 2759

National Oilwell Carrier Workover Rig - 2007 Built for Sale

Worldoils Marketplace

National Oilwell Model 5C Five Axle K100C Carrier Workover Rig - For Sale

ID 2760

Alta 1500 HP AC/VFD Drilling Rig for sale

Worldoils Marketplace

Worldrigs ID: WR2757

Alta 1500 HP AC/VFD Drilling Rig for sale
1500HP AC/VFD Rig for sale

Mast
Clear Height : 142’
Max. Static Hook Load (12 Lines) : 800,000 lbs
Max. Wind Capacity : 75 knots

Substructure
Floor Height : 25’
Clear Height : 20’-6”
Rotary Capacity : 800,000 lbs
Setback Capacity : 600,000 lbs
Hole Opening : 37-1/2”

Top Drive
Max. Static Hook Load Rating : 500 tons
Max. Speed : 265 rpm
Max. Intermittent Torque : 71,000 ft-lbs
Max. Continuous Torque : 51,400 ft-lbs
Pressure Rating : 7,500 psi

Drawworks
Rated Capacity : 1500 hp
Max. Capacity (12 lines) : 800,000 lbs
Drum Groove : 1-3/8”

Mud Pumps
Input Horsepower Rating : 2,200 hp
Maximum Pump SPM : 120 rpm
Maximum Liner Size : 9”
Minimum Liner Size : 5”
Stroke : 14

Power Generation
Generator Power : 1350 kW @ 1200 rpm
Engine Power : 1476 HP @ 1200 rpm

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

------------------------------------------------------------
Search words (for official use only) :
Alta 1500 HP AC/VFD Drilling Rig for sale
1500HP AC/VFD Rig for sale
Land Drilling Rig for Sale
Used Drilling Rig - Alta 1500HP - For Sale
AC/VFD Rig for Sale
------------------------------------------------------------

Alta 1500 HP AC/VFD Drilling Rig for sale

ID 2757

Worldoils Marketplace

Worldrigs ID: WR2756

National 650HP Drilling Rig for Sale
2011 Rebuilt National 650HP Rig

General Description
Year Built/Rebuilt : 1985/2011
Estimated Drilling Depth : 8,200 ft
Estimated Rig Move Loads : 39
Estimated Camp Move Loads : 35
Rated HP : 650

Mast
Height : 113.00 ft
Static Hook Load Capacity : 286,000 lbs
Mast Racking Capacity : 10,000 ft

Substructure
Style : Telescoping
Height : 14.10 ft
Clear Height : 11.22 ft
Casing Capacity : 286,000 lbs
Maximum Setback Load (lbs) : 198,000

Drawworks
Make : National
Model : 4226D
Power Rating : 650 hp
Input Power : 1 ea Caterpillar D 3412
Drilling Line Size : 1 1/8"
Auxillary Brake : Parmac V-80

Top Drive / Power Swivel
No Top Drive

Swivel
Make : Upetrom
Model : CH 125
Capacity : 125 Ton

Rotary Table
Make : Upetrom MRS205
Table Opening : 20 ½
Maximum Load Rating : 350 Ton

Power Generation
Mechanical Rig

Mud System
Mud Pumps : 1 ea Upetrom 3PN-1000
Power Rating : 1,000 hp @ 150 spm
Pressure Rating : 5,000 psi
Active Mud Volume : 906 bbls
Reserve Mud Volume : 101 bbls
Shale Shakers : No Shale Shake, Mongoose
Mud Cleaner : N/A
Desander : N/A Brandt 10" X 2 Cones
Desilter : N/A
Centrifuge : N/A

Well Control
Annular : 9" 3,000 psi, Upetrom
Choke Manifold : Upetrom

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------
Search words (for official use only) :
National 650HP Drilling Rig for Sale
1985 Built National 650HP Rig for sale
Used Drilling Rig for sale
Trailer Mounted Telescopic Rig - For Sale
2011 Rebuilt National 650HP Rig
650HP National Land Drilling Rig for Sale
-----------------------------------------------------------------

National 650HP Drilling Rig for Sale

ID 2756

Worldoils Marketplace

Worldrigs ID: WR2755

Corsair 550 HP Rig for Sale
Carrier Mounted Corsair 550HP Rig for Sale

General Description
Estimated Drilling Depth : 7,200 ft
Estimated Rig Move Loads : 44
Estimated Camp Move Loads : 35
Rated HP : 550

Mast
Height : 107.00 ft
Static Hook Load Capacity : 297,000 lbs
Mast Racking Capacity : 6,560 ft

Substructure
Style : Monobloc
Height : 12.92 ft
Clear Height : 10.36 ft
Casing Capacity : 297,000 lbs
Maximum Setback Load (lbs) : 198,000

Drawworks
Make : Corsair
Model : W5384E
Power Rating : 550hp
Input Power : 1 ea Caterpillar D3408
Drilling Line Size : 1"
Auxillary Brake : Parmac Inc D631974-X

Top Drive / Power Swivel
No Top Drive

Swivel
Make : Oilwell
Model : PC-150
Capacity : 150 Ton

Rotary Table
Make : Gardner Denver 17.5
Table Opening : 17 ½"
Maximum Load Rating : 150 Ton

Power Generation
Mechanical Rig

Enchancements
Power Slip Frame : Upetrom

Mud System
Mud Pumps : 2 ea Upetrom 3PN-1000
Power Rating : 1,000 hp @ 150 spm
Pressure Rating : 5,000 psi
Active Mud Volume : 1,060 bbls
Reserve Mud Volume : 117 bbls
Shale Shakers : 1 ea MI Swaco Mongoose
Mud Cleaner : N/A
Desander : N/A
Desilter : N/A
Centrifuge : N/A

Well Control
Annular : 13 5/8" 3,000 psi, Upetrom

Double Ram Preventer :
13 5/8" 3,000 psi, Upetrom,
9" 3,000 psi, Upetrom

BOP closing Unit : Upetrom

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------
Search words (for official use only) :
Corsair 550 HP Rig for Sale
Carrier Mounted Corsair 550HP Rig for Sale
Telescopic Mast Land Drilling Rig - For Sale
Mechanical Rig - Corsair 550HP - For sale
Land Drilling Rig for Sale
-----------------------------------------------------------------

Carrier Mounted Corsair 550HP Rig for Sale

ID 2755

Worldoils Marketplace

Worldrigs ID: WR2758

Foremost DR-24 Drilling Rig for Sale
Drilling Rig - Foremost DR-24 - For Sale

Model : DR-24 Drill Rig
Manufacturer : Foremost Barber
Year : 2001
Condition : Used

Description :

2001 Foremost DR-24 Drill Rig
Mounted on 2001 Freightliner Truck
Caterpillar C-15 Diesel Engine (rated 500 HP)
4,100 Hours as of 10/16/20
Atlas Copco 900 cfm / 350 psi Air Compressor
24” Diameter Dual Rotary Power Head
Set up for 2-7/8" IF Drill Rod and 6” Beco Rod
4 piston FMC Bean water injection pump

Oil injection system

Jaws 6, 8, 10, 12, 14, 16, 18, 20, 24 inch
Welding (Cage) Clamp 6, 8, 10, 12, 14, 16, 18, 20, 24 inch
Divertor for 4-1/2 inch Drill Rod with adaptors for 6, 8, 10,
12 inch casings
Divertor for 10-3/4 inch drill rod with adaptors for 12, 14, 16, 18,
20, 24 inch casings
Drive Shoes 6, 8, 10, 12, 14, 16, 18, 20, 24 inch
24 - 4-1/2 inch x 20 ft x 2-7/8 IF thread drill rods
6 - 10-3/4 x 20 ft x 6-5/8 Beco thread drill rods
1 – 10-3/4 x 15ft x 6-5/8 Beco thread drill rod
1 - 10-3/4 x 10ft x 6-5/8 Beco thread drill rod
2 – 10-3/4 x 5ft x 6-5/8 Beco thread drill rods
New Miller Welder

Oxy/Acetalene Torch Setup

Foremost DR-24 Drilling Rig - For Sale

ID 2758

Worldoils Marketplace

Worldrigs ID: WR2753

Cooper 350 Mechanical Drilling Rig
350HP Trailer Mounted Land Drilling Rig for sale

General Description
Make : Cooper
Estimated Drilling Depth : 5,000ft
Estimated Rig Move Loads : 38
Estimated Camp Move Loads : 35
Rated HP : 350

Mast
Height : 104.00 ft
Static Hook Load Capacity : 176,000 lbs
Mast Racking Capacity : 3,600 ft

Substructure
Style : Telescoping
Height : 12.92 ft
Clear Height : 9.82 ft
Casing Capacity : 176,000 lbs
Maximum Setback Load (lbs). : 132,000

Drawworks
Make : Cooper
Model : 4210-3808
Power Rating : 350 hp
Input Power : 1 ea Caterpillar
Drilling Line Size : 1"
Auxillary Brake : Parmac 122

Top Drive / power Swivel : No Top Drive

Swivel
Make : Upetrom
Model : CH 125
Capacity : 125 Ton

Rotary Table
Make : Ideco 17.5
Table Opening : 17 1/2
Maximum Load Rating : 150 ton

Power Generation
Mechanical Rig

Mud System
Mud Pumps : 1 ea Gardner Denver 1PY-172
Power Rating : 1,000 hp @ 130 spm
Pressure Rating : 5,000 psi
Active Mud Volume : 906 bbls
Reserve Mud Volume : 101 bbls
Shale Shakers : 1 ea Upetrom
Mud Cleaner : N/A
Desander : Upetrom 2" X 12 Cones
Desilter : Upetrom 3" X 6 Cones
Centrifuge : : N/A

Well Control
BOP Closing Unit : Upetrom

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
-----------------------------------------------------------------------
Search words (for official use only) :
Cooper 350 Mechanical Drilling Rig
350HP Trailer Mounted Land Drilling Rig for sale
Cooper 350 - Telescopic Mast Rig for sale
Land Drilling Rig for Sale
Mechanical Rig for Sale
------------------------------------------------------------------------

Cooper 350 Drilling Rig for Sale

ID 2753

Victory Trailer Mounted Drilling Rig - 2009 Built - For Sale

Worldoils Marketplace

Worldrigs ID: WR2754

Victory Trailer Mounted Telescopic Mast, Double Rig for Sale
Victory Trailer Mounted Drilling Rig - 2009 Built - For Sale

General Description

Make : Victory
Year Built/Rebuilt : 2009
Estimated Drilling Depth : 12,000 ft
Estimated Rig Move Loads : 48
Estimated Camp Move Loads : 4
Rated HP : 850

Mast
Height : 105.00 ft
Static Hook Load Capacity : 350,000 lbs
Mast Racking Capacity : 12,000 ft

Substructure
Style : Telescoping
Height : 20.00 ft
Clear Height : 17.00 ft
Casing Capacity : 440,000 lbs
Maximum Setback Load (lbs) : 375,000

Drawworks

Make : TSM

Power Rating : 850 hp

Brake Type - Band or Disc : Disc
Drilling Line Size : 1 1/8"
Auxillary Brake : TSM 236H SSB 90#RL W/CVCP

Top Drive / Power Swivel

Make : Victory Rig Equipment

Model : VRT200H
Capacity : 200 Ton
Torque - Continuous : 16,000 ft-lb

Swivel
No Swivel

Rotary Table
Make : TSM 17.5
Table Opening : 17 ½"
Maximum Load Rating : 150 Ton

Power Generation
Engines : 3 ea Caterpillar C 32
Generators : 3 ea Caterpillar SR 4 B
SCR / VFD / DC/DC : VFD Rig

Mud System
Mud Pumps :
2 ea Weatherford Oil Tools MP-10
1,000 hp @ 140 spm
Model : TSM 850
Pressure Rating : 5,000 psi
Reserve Mud Volume : 0 bbls
Shale Shakers : 2 ea MI Swaco Mongoose
Mud Cleaner : N/A
Desander : Brandt 10" X 2 Cones
Desilter : Brandt 5" X 16 Cones
Centrifuge : N/A

Well Control
Annular : 11" 5,000 psi, Doyles Valves,

Single Ram Preventer :

11" 10,000 psi,

Doyles Valves, Type-U

Choke Manifold :
Weatherford oil tools
4 1/16" 10,000 psi
BOP Closing Unit :
T3 Energy Services
6 Station 3,000 psi"

Enhancements

Forklift : Caterpillar 930 H

Iron Roughneck : NOV ST-80 C

Victory Trailer Mounted Telescopic Mast, Double Rig - For Sale

ID 2754

Gardner Denver 1000hp SCR Drilling Rig for sale

Worldoils Marketplace

Worldrigs ID: WR150

Gardner Denver SCR Drilling Rig for Sale
1000hp SCR Drilling Rig for sale

Drawworks
Gardner Denver 1000 HP Drawworks with water brake.
Powered by (1) 752 series type traction motors.

Mast
DSI
142’ x 25’ mast rated at 750,000 lb. static hookload, 500,000 lb. setback

Substructure
DSI
22’ substructure with rotary capacity at 750,000 lb. and a setback of 500,000 lb.
Sub is a box-on-box type.

Pumps
Two (2) F1600 pumps
Independently powered by two (2) 752 traction motors.
Pumps complete with all plumbing, pulsation dampeners, and 5x6 charge pumps.

Rig Houses, tanks
Drillers top doghouse= 9’ H x 8’6” W x 35’L
Mudhouse= 9’H x 10’ W x 35’ L
Partshouse= 9’H x 10’ W x 45’ L
Water Storage= 9’ H x 10’ W x 45’ L with two (2) 2” x 3” centrifugal pumps.
Fueltank= 12,000 gallons

Mud system
Two (2) 8’6” H x 10’ W x 47’ L mudtanks (1000 BBL)
Tanks to have necessary piping, valves, dump gates, & compartments
One (1) 2-cone desander
One (1) 10-cone desilter
Two (2) derrick style linear shaker
Four (4) mud agitators with 10HP motors
Four (4) 5” x 6” centrifugal pumps with 75HP motors

Rotary Equipment
One (1) 27-1/2” rotary table
One (1) 400 ton swivel
One (1) Varco model HD Kelly drive bushing

Traveling Equipment
One (1) 400 ton block
One (1) set of 3 ½” x 108 elevator links

Well Control
One (1) 11” x 5000 PSI annular
One (1) 11” double ram preventor
One (1) 180 Gallon Koomey type closing unit
One (1) Koomey type remote
One (1) 2” x 5000 choke manifold
One (1) B.O.P. lines suitcase

Instrumentation
One (1) Totco type 50 weight indicator
One (1) Totco 100 rotary torque
Two (2) mudpump SPM
One (1) rotary RPM
All above mounted in Totco drilling console
Geolograph

SCR House
Ross Hill 3 generator x 4 SCR system
9’ W x 40’ L x 9’ H house

Power Equipment
(3) 3512 C Cats with 1050 KW generators
Generators mounted on 10’ W x 35’ L x 9’ H skids
(2) Gardner Denver 30 HP screw type compressors
(1) Gardner Denver cold start compressor

Auxilliary Equipment
One (1) Mathey wireline unit
Two (2) air winches
Misc. (1) set of handling tools
(1) Spinnerhawk powertong
(1) Kelly Spinner
(3) 18” x 30’ pipe racks

For more photos please visit : http://www.worldoils.com/landrigs/rig2002.php

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------------
Search words (for official use only) :
Gardner Denver SCR Drilling Rig 1000hp for Sale
1000hp SCR Drilling Rig
Gardner Denver Drilling Rig for Sale
--------------------------------------------------------------------------------------------------

Drilling Rig - Gardner Denver SCR - 1000hp - for sale

ID 150

Davey Rotary Table Drilling Rig for Sale

Worldoils Marketplace

Davey Rotary Table Drilling Rig - For Sale

ID 2752

Drilling Rig - NOV 1000 Hp AC/VFD - For Sale

Worldoils Marketplace

Worldrigs ID: WR2751

NOV 1000 HP AC/VFD Drilling Rig for Sale
Drilling Rig - NOV 1000 Hp AC/VFD - For Sale

Description :

General Description :
Make : NOV
Year Built/Rebuilt : 2008
Estimated Drilling Depth : 12,000 ft
Estimated Rig Move Loads : 17
Estimated Camp Move Loads : 26
Rated HP : 1000

Mast :
Height : 80.00 ft
Static Hook Load Capacity : 500,000lbs
Mast Racking Capacity : N/A

Substructure :
Style : Parallelogram
Height : 20.00 ft
Clear Height : 18.00 ft
Casing Capacity : 500,000lbs
Maximum Setback Load : N/A

Drawworks :
Make : NOV
Model : SSGD-250
Power Rating : 1,500 hp
Input Power :
2 ea Baylor
CM632UU1129A
Brake Type : Disc
Drilling Line Size : 1 1/4”

Top Drive / Power Swivel :
Make : NOV
Model : TDS 10-RR
Capacity : 250 Ton
Torque – Continuous :
Max RPM
20,000 ft-lb
@ 87 RPM

Swivel :
None

Rotary Table :
None

Power Generation :
Engines :
3 ea Caterpillar
3512 B
Generators :
3 ea Caterpillar
SR4B
SCR / VFD / DC/DC : VFD rig

Mud System :
Mud Pumps :
2 ea NOV
F-1000
Power Rating :
1000 hp
@ 140 rpm
Pressure Rating : 5,000 psi
Active Mud Volume : 1,080 bbls
Reserve Mud Volume : 0 bbls
Shale Shakers :
4 ea Brandt
King Cobra
Mud Cleaner : N/A
Desander :
Brandt 10”
X 3 Cones
Desilter :
Brandt
DSLR-20GG-4CTX
Centrifuge : N/A

Well Control :
Annular :
13 5/8” 5,000 psi
-1, Hydril, GX
21 ¼”-2000 psi
-1, Shaffer
Double Ram Preventer :
[Cameron] -1
Cameron,
U Double BOP
with Large Bore
Shear Ram
Choke Manifold :
Shaffer 3 1/8”
5,000 psi
BOP Closing Unit :
Shaffer 6 station
3,000 psi

Enhancements :

NOV 1000 HP AC/VFD Drilling Rig - For Sale

ID 2751

Worldoils Marketplace

Reichdrill T650W Drilling Rig - For Sale

ID 83

Generic LTD 360 Cable Drilling Rig for Sale

Worldoils Marketplace

Generic LTD 360 Cable Drilling Rig - For Sale

ID 2748

Schramm TXD Drill Rig & Package - 2013 Built for Sale

Worldoils Marketplace

Worldrigs ID: WR791

Schramm TXD Drilling Rig Package for Sale
Schramm TXD Drill Rig & Package - 2013 Built for Sale

Model : TXD Drill Rig & Package
Manufacturer : Schramm
Year : 2013
Condition : Used

Description :

Schramm TXD Drilling Rig Package - For Sale

ID 791

New Hydraulic Land Drilling Rigs for Sale in Europe

Worldoils Marketplace

Worldrigs ID: WR559

Hydraulic Land Drilling Rig for Sale
New 2000hp Hydraulic Land Drilling Rig
Hydraulic Land Drilling Rig - 2000hp - For Sale
New Land Drilling Rigs for Sale
New Hydraulic Land Drilling Rigs - 2000hp
2000hp Hydraulic Land Drilling Rig for sale

Specifications

Mast
Max. hook load : 440 tn (880,000 lbs)
Height : 36.0 m (118.1 ft)
Stroke length : 22.0 m (72.2 ft)
Total height incl. substructure : 46 m (151 ft)

Substructure
Drill floor height : 9.0 m (29.5 ft)
Clear height below RT : 7.5 m (24.6 ft)
Rotary opening : 952.5 mm (37 ½”)
BOP hoisting system : 2 x 27.5 tn (2 x 55,000 lbs)

Drawworks (AC – geardriven drawworks)
Rated power : 2,000 hp
Hoist capacity : 440 tn (880,000 lbs)
Drill in size : 38 mm (½”)
AC drilling motors : 2 x 850 kW (2 x 1,120 hp)
Max. tubular length (2 x range II) : 19 m (62.3 ft)

Top drive (TDK 65-500 electrically driven)
Load capacity : 500 tn (1,000,000 lbs)
Drilling torque* : 63,000 Nm (46,500 ft-lbs)
Make up / break out torque* : 100,000 Nm (73,760 ft-lbs)
Static break torque* : 105,000 Nm (77,440 ft-lbs)
Speed range : 0-115/230 rpm
Rated power : 758 kW (1,030 hp)
* nominal values

Hydraulic power unit (HE2100 electro-hydraulic)
Rated power (main system). : 1 x 400 kW. (1 x 536 HP)
Rated power (rig-up & emergency system) : 1 x 160 kW. (1 x 215 HP)

Pipe handling system - Vertical handling and storage system
Max. tubular length : 19 m (62.3 ft)
Drill pipe capacity : 2 3/8" – 6 5/8".(2 3/8" – 6 5/8")
Drill collar capacity : up to 9 ½” (up to 9 ½”)
Casing capacity (standard) : Up to 20”
Number of pipe racks : 4
Total storage capacity (5“ DP). : 6,000 m (19,684 ft)

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

Hydraulic Land Drilling Rig - New 2000HP for Sale

ID 559

Worldoils Marketplace

Worldrigs ID: WR81

Gefco / Speedstar 30K-DH Drill Rig for Sale
2007 Built Used Drilling Rig for sale

Model : 30K-DH Drill Rig
Manufacturer : Gefco
Model Year : 2007
Condition : Used

Description :

2007 Gefco / Speedstar 30K-DH Drill Rig
Sullair 1050 cfm / 350 psi Air Compressor
Water Injection Pump
Hammer Lubricator
Hydraulic Leveling Jacks
Mounted on a 2006 Peterbuilt 357 Truck
CAT C15 Diesel Engine (Rebuilt in 2012)

Location : N.E. Region

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------------------
Search words (for official use only) :
Gefco / Speedstar 30K-DH Drill Rig For Sale
2007 Built Used Drilling Rig for Sale
Gefco Drill Rig for Sale
Land Drilling Rig For Sale
Drilling Rig - 2007 Built - for Sale
Gefco / Speedstar 30K-DH Drill Rig for Sale
------------------------------------------------------------------------------

Gefco / Speedstar 30K-DH Drill Rig for Sale

ID 81

Generic Larson Reverse Rotary Drilling Rig for Sale

Worldoils Marketplace

Generic Larson Reverse Rotary Drilling Rig for Sale

ID 1036

Geoprobe 8150LS Crawler Drilling Rig -For Sale

ID 2745

Worldoils Marketplace

Worldrigs ID: WR781

Ingersoll-Rand CM-780D Blasthole Drilling Rig for Sale
2003 Built Ingersoll-Rand CM-780D Blasthole Drilling Rig

Model : CM-780D Blasthole
Manufacturer : Ingersoll-Rand
Year : 2003
Condition : Used

Description :

2003 Ingersoll-Rand CM-780D Blasthole Drill Rig
Crawler Mounted
Caterpillar Diesel Engine
S/N: G78255EL
IR HR2 865 CFM / 350 PSI Air Compressor
Water injection
Hammer Lubricator
Thread Greaser
Enclosed Cab
A/C & Heater
Rod Changer
13-1/2" Track Shoes
Set up for (3-1/2”O.D. x 13.1ft) Drill Pipe 21/2Z thread
Meter Reads 15,940 Hours

Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Ingersoll-Rand CM-780D Blasthole Drilling Rig - 2003 Built
Used Drilling Rig - Ingersoll-Rand CM-780D Blasthole
Ingersoll-Rand CM-780D Blasthole Used Drilling Rig
Ingersoll-Rand Drilling Rig for Sale in USA
Used Ingersoll-Rand Land Drilling Rig for Sale in USA

Ingersoll-Rand CM-780D Blasthole Drilling Rig - For Sale

ID 781

Worldoils Marketplace

Simco 2800HT Drilling Rig for Sale

ID 2743

Gardner Denver Drilling Rig - 1985 Built for Sale

Worldoils Marketplace

Gardner Denver 2500 Drilling Rig - For Sale

ID 2742

Worldoils Marketplace

Failing 1000 Drilling Rig - For Sale

ID 517

Worldoils Marketplace

Midway 1500 Drilling Rig for Sale

ID 2739

Worldoils Marketplace

Mayhew 500 Drilling Rig - For Sale

ID 2740

Worldoils Marketplace

DW400C Hydraulic Drill Rig - For Sale

ID 2738

Gardner Denver 1000 Drilling Rig for Sale

Worldoils Marketplace

Worldrigs ID: WR2744

Gardner Denver 1000 Drilling Rig for Sale
Drilling Rig - Gardner Denver 1000 - For Sale

Model : 1000 Drill Rig & Package
Manufacturer : Gardner Denver
Condition : Used

Description :

Gardner-Denver 1000 Drill Rig
14W Drawworks
7-1/2" Rotary Table
Rated for drilling to 1000 ft
Dis-assembled for rebuild
Deck steel replaced in preparation for rebuild
Comes with all components necessary to rebuild back to original specs:
2-stage mast cylinder
3- large 8-1/2 ft outriggers
Piston style WX 1004 compressor (stored inside building)
Gardner-Denver FXG 5x6 mud pump (stored inside building)
24 ft 3-3/8" fluted kelly bar
Little Giant Swivel
Mayhew block for 1000 rig 12" single sheave

292 ft of 3-1/2" flush drill pipe

Gardner Denver 1000 Drilling Rig - For Sale

ID 2744

Drilling Rig - Simco 2800 HSHT - 1989 Built for Sale

Worldoils Marketplace

Simco 2800 HSHT Drilling Rig - For Sale

ID 2737

Drilling Rig - Gill-Beetle Track - For Sale

Worldoils Marketplace

Gill-Beetle Track Drilling Rig - For Sale

ID 2729

Schramm TXD Drilling Rig Package for Sale

Worldoils Marketplace

Worldrigs ID: WR766

Schramm TXD Drilling Rig Package for Sale
Schramm TXD Drill Rig & Package - 2012 Built for Sale

Model : TXD Drill Rig & Package
Manufacturer : Schramm
Year : 2012
Condition : Used

Description :

2012 Schramm TXD Drill Rig Package

Deck Engine : Detroit Diesel DDC/MTU 12V-2000

Tilting Top Head Drive :

Heavy duty, single reduction gearbox

with 4 two-speed disc valve type hydraulic motors
variable rotation speed via HRC control
Torque: 0-90 RPM @ 17,750 ft-lbs (24,066 N-m)
0-180 RPM @ 7,670 ft-lbs (10,399 N-m)
Rotation Speed: 0 - 180 RPM

Feed System :

50 ft (15.24 M) head travel

200,000 lbf (890 kN) hoist capacity
100 fpm (30.5 m/min) hoist speed
32,000 lbf (142 kN) pulldown
200 fpm (61 m/min) pulldown speed

Drill Table :

Table Opening: 30 inches (768 mm) diameter with table retracted

Hydraulically retractable slip box

Drill Pipe and Casing :

Range III tubular capability

30 inch

Winch :

Planetary design with spring applied hydraulic release brake ·

Schramm TXD Drilling Rig Package - For Sale

ID 766

Worldoils Marketplace

Schramm T450WS Drilling Rig - For Sale

ID 2721

Worldoils Marketplace

Ingersoll-Rand CM-780D Blasthole Drilling Rig - For Sale

ID 2722

Worldoils Marketplace

Worldrigs ID: WR142

Mast: Ideco 117’, 358,000#

Substructure: 200 Ton, 12’ under rotary beams

Rotary Table: Brewster 22”

Top Drive: Tesco 250 HXI 700

Block & Swivel: Ideco UTB-160 block, Ideco TL-200 swivel with foster spinner

Mud Pumps: (2) F-1000 triplex pumps

Mud Pits: dual vortex linear shakers, 3 cone desander, 12 cone desilter,
600 bbl capacity and 50 bbl slug tank, (2) demco 5x6 mud mixing pump

Light Plant: (2) 60 series Detroit engines, 14L, 400KW gen light plants

Kelly Spinner: Foster

Drill Pipe: 6,500’ of 5” S135

Drill Collars: (6) 6.5” x 2.25” slick

Accumulator: 6 valve, 80 gallon koomey with remote control on side of dog house

BOP: 11” Hydril annular, 11” double ram, 5000#

Communication: cell phone and Pason satellite

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.