Cranes for Sale - Oil, Gas and Offshore Equipments marketplace, Oil & gas equipments

Untitled Document

Search Here

Rig/Vessel/Equipment Name:
Category:
Subcategory:
Buy/Sell/Hire/Need for hiring:
ID:

Browse equipments

No relevant equipments are found in our database.

Search again

Untitled Document

Featured equipments for sale

Chicago Pneumatic 650 S/S Drilling Rig for Sale

Worldoils Marketplace

Chicago Pneumatic 650 S/S Drilling Rig for Sale

ID 111

TSM 850 Trailer Mounted Drilling Rig for Sale

Worldoils Marketplace

Worldrigs ID: WR2620

TSM 850 Trailer Mounted Drilling Rig for Sale
850 hp Trailer Mounted Drilling Rig for Sale

Description :

General Description :
Make : Victory
Year built / Rebuilt : 2009
Estimated drilling depth : 12,000 ft
Estimated rig move loads : 48
Estimated camp move loads : 4
Rated HP : 850

Mast :
Height : 105.00 ft
Static Hook Load Capacity : 350,000lbs
Mast Racking Capacity : 12,000 ft

Substructure :
Style : Telescoping
Height : 20.00 ft
Clear Height : 17.00 ft
Casing Capacity : 400,000lbs
Maximum Setback Load : 375,00lbs

Drawworks :
Make : Victory Rig Equipment
Model : VRT200H
Capacity : 200 Ton
Torque - Continuous : 16,000 ft lb

Swivel :
None

Rotary Table :
Make : TSM
Table Opening : 17 ⅟₂"
Maximum Load Rating : 150 Ton

Power Generation :

SCR / VFD / DC / DC : VFD Rig

Mud System :

Mud Pumps :

2 ea Weathford

Oil tools MP- 10
Power Rating : 1000hp @ 140 rpm
Pressure Rating : 5,000 psi
Active Mud Volume : 905 bbls
Shale Shakers : 2 es MI Swaco
Mud Cleaner : N / A

5 x 16 Cones
Centrifuge : N / A

Well Control :

TSM 850 Trailer Mounted Drilling Rig - For Sale

ID 2620

Worldoils Marketplace

Worldrigs ID: WR156

EMSCO GB 500 Drilling Rig for Sale
EMSCO GB 500 +/- 12,000' Drilling Rig (1200hp)

Drawworks
EMSCO GB 500, Ser. 108 w/ twin engine compound P/B (2) C18 Cat Engines 630 hr.
1200 HP, Ser #WJH00470 & Ser #WJH00474, Torque oil works model #C195-100 Type
F Ser # 1218 & Ser # 1220, air compressor Gardner Denver, id #A9G9999, hydromatic
Parkersburg 40” SR Ser #39897, Catheads Kelco model #16LB Ser #DD0A & Ser #HR80

Derrick
Lee C. Moore 131’, 8 line crown and block 1 1/8”, 425,000# SHL

Substructure
Split type with boosters for one (1) piece haul, “New,” 21.6W x 50L x 12H

Mud Pumps
D500 EMSCO’s, (#1) Ser #367 P/B Cat 353 Ser # 46B393, (#2) Ser #400 P/B 12V 71 Detroit

Mud System
(2) pit system, 600 bbl, “New”, 500 bbl with Hopper stirrers & agitators, 50 HP electric
Harrisburg mix pumps

Generators/Utility House
7.1w x 8H x 30L, (2) Cat 3306 engines with 155 KW generators 240 volts 2/220, step down
Gardner Denver 240 electric air compressor, “New”

Rotating Equipment
20 ½ EMSCO, Kelly 5 ¼ hex with 65/8 box, 4 ½ XH pin, 40’ long with Varco 5 ¼ hex bushing
roller type, “New”, Swivel EMSCO LB 200

Traveling Equipment
250 Ton McKissick Traveling Block, BJ type B tongs, 2 ¾” x 96” BJ elevator links “New,”
250 ton BJ elevator “New”

Well Control Equipment
11” Double Ram 3000# Shaffer, 11” 3000# Hydril

Rig Houses
7.6’ X 32’ X 7’ Top Dog House, 7.1W x 8H x 40L Change House “New”

Water/Fuel Tanks
7.1W x 8H x 40L Water Tank “New”, 12,000 gallon 7.1’ x 40’, 1” air diaphragm Fuel Pump

Catwalk
4’W x 42”H x 40’L, “New”, (3) sets pipe racks, (6) pipe baskets

Drill Pipe / Collars
Chinese drill pipe 12,000’ of 4 ½” G195 16.6# “New” drill pipe. 21 collars 6 ½” x 2 ¼”

Auxilliary Items
(4) sets steps, V-door, derrick stand, assorted bit subs & change overs, 10 hand subs,
D.P. – DC – casing slips, safety clamps, 2 x 2 ¾ electric wash down pump, hose
lines & fittings, 3500 drilling line & stand, electric boxes & all new wire, Kelly hose,
vibrating hose, unions

For more details, please see : http://www.worldoils.com/landrigs/rig248.php

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------
Search words(for official use only) :
EMSCO GB 500 Drilling Rig - 1200hp for Sale
Oil Rigs
Oil drilling land rigs
1200hp Land Drilling Rig
Drilling Rigs for Sale
EMSCO GB 500 +/- 12,000' Drilling Rig
-----------------------------------------------------------------------------------------------

Drilling Rig - EMSCO GB 500 - 1200hp for sale

ID 156

Worldoils Marketplace

Schramm T130XD Drilling Rig - For Sale

ID 341

Gardner Denver 1500 Drilling Rig for Sale

Worldoils Marketplace

Gardner Denver 1500 Drilling Rig - For Sale

ID 793

Worldoils Marketplace

Worldrigs ID: WR853

Versa-Drill V2000 Drilling Rig for Sale
Used Versa-Drill V2000 Drilling Rig for Sale

Model : V2000 Drill Rig
Manufacturer : Versa Drill
Year : 2003
Condition : Used

Description :

2003 Versa-Drill V2000 Drill Rig
Mounted on a Kimble C330 6X6 Carrier Truck
deluxe aluminium cab and fenders
206" wheel base
Caterpillar C-15 diesel engine (rated 500 HP) & Engine block heater - Inline
9946 hours
Eaton ten (10) speed transmission

21,000 lb fabco front axle, Spicer 40,000 lb rear tandem axels with driver

controlled main locking differentials, Total 61,000 lb GVWR

Versa-Drill V2000 Drilling Rig - For Sale

ID 853

Worldoils Marketplace

Worldrigs ID: WR2608

NOV 1500 HP SCR Drilling Rig for Sale

NOV SCR Drilling Rig for Sale

Description :

General Description :
Make : NOV
Year Built : 2009
Est. Drilling Depth : 18,000ft
Est. Rig Move Loads : 60
Est. Camp Move Loads : 23
Rated HP : 1500

Mast :
Height : 142ft
SHL Load Capacity : 750,000 lbs
Mast Racking Capacity : 19,300ft

Substructure :
Style : Parallelogram
Height : 25.00ft
Clear Height : 23.30ft
Casing Capacity : 750,000 lbs

Drawworks :
Make : NOV
Power Rating : 1500 HP
Input Power : 2 Yongji YZ08X3
Brake Type : Disc
Drilling Line Size : 1 - 3 / 8"
Auxillary Brake : Wichita WC66

Top Drive : NOV TDS 11-SA
Capacity : 500 Ton
Torque - Continuous : 37,500 Ft-Lb @ 125 RPM

Rotary Table :
Make : NOV ZP-375 37-1/2"
Max Load Rating : 650 Ton

Power Generation :
Engines : 4 Detroit R1638AS36
Generators : 4 Baylor S437RUJ-597A
DC : SCR

Mud System :
Mud Pumps : 3 NOV 12-P-160 1600 HP @ 120 SPM
Res Mud Volume : 285 Bbis
Pressure Rating : 5,000 psi
Active Mud : 1100 Bbis
Shale Shakers : 3 MI Swaco Mongoose

Mud Cleaner : 1 MI Swaco Mongoose
Desander : MI Swaco
Desilter : MI Swaco

Well Control :
Annular : 13 -5 / 8" 5K Shaffer
Double Ram : 13 -5 / 8" 5K Shaffer

Choke Manifold : Weatherford Intnl 4-1 / 16" 5,000 psi

Bop Closing Unit :

Sara Services MC-220-11BT3

NOV 1500 HP SCR Drilling Rig for Sale

ID 2608

IRI 1100Hp Trailer Mounted Telescopic Drilling Rig for Sale

Worldoils Marketplace

Worldrigs ID: WR2609

IRI 1100Hp Trailer Mounted Telescopic Drilling Rig for Sale
Trailer Mounted Telescopic Mast Triple Drilling Rig - 2001 Built

Description :

IRI 1100Hp Trailer Mounted Telescopic Drilling Rig for Sale

ID 2609

TT Sense Trailer Mounted Drilling Rig for Sale

Worldoils Marketplace

Worldrigs ID: WR2610

TT Sense Trailer Mounted Drilling Rig for Sale
850 HP Trailer Mounted Six Drilling Rigs for Sale

Description :

TT Sense Trailer Mounted Drilling Rig for Sale

ID 2610

Worldoils Marketplace

Worldrigs ID: WR2592

OIME SL-7 Drilling Rig For Sale

1200 HP Mechanical Drilling Rig for Sale

Description :

Drawworks :

OIME SL - 7 1,200 HP, 1-1/4" Lebus Grooved Drum Drawworks w / Parmac
342 Hydromantic Brake, and Foster Hydraulic Make-Up and Break-Out
Catheads and Hydraulic Power Supply

Mast & Substructure :
PARCO SL-7 136ft High Mast S/N: SL413675, 21ft Parco Split Level
Substructure, S/N: 1136A with 17ft Rotary Clearance, 750,000 lb. Static
Hook Load Capacity w/(10) lines, Drillers Side Top Doghouse, Catwalk
w / (10) 18"H Pipe Racks and (2) Triangular Pipe Racks

Transmission Drive Train :
(3) Caterpillar 3412T, 700 BHP Engines w / Allison CLT 6061-4 Six Speed
Trasmission Compound

Rotating Equipment :
IDECO Model 275 -K, 27-1/2" × 53 -1/4" Rotary Table with Split Master
Bushing
National Model P-400 400 Ton Swivel
5-1/4" Hex × 42ft L Kelly

Traveling Equipment :
PARCO 375 Ton Crown, w / (6) 1-1/4" × 42" Dia. Sheaves
American Block Model DH4E350, 350 Ton Capacity, (5) 1-1/4" × 42" Dia.
Sheaves

Triplex Mud Pumps :
(1) National Model 10-P-130, 1,300 HP Triplex Pump, independent drive
with remanufactured Caterpillar D-3512DITA, 1,250 HP engine at 1200
RPM, with 6 × 5, 60 HP centrifugal charge pump and two master skid
arrangements.
(1) National Model 9-P-100, 1,000 HP Triplex Pump powered by
Caterpillar 3508TA 1,000 BHP Engine with 6 × 5, 60 HP centrifugal charge
pump and master skid.

Utility House :
Electrical Control System w / (2) Caterpillar 3412T Engines w / GE 420 KW
Generators for Light Plant Operation and (2) Sullivan-Palatek 30 HP Air
Compressors with Receiver Tanks

Fuel Tank :
9,000 Gallon Cylindrical Fuel Tank and Lubester w/ (2) 2 HP Fuel Transfer
Pumps

Water Tank :
500 bbl. Horizontal Open Top Water Tank w / (2) 2 × 1-1/2, 25 HP Centrifugal
Pumps

Mud System :
320 bbl. Mud Shaker Tank, (3) Compartment Flat Bottom Tank, Internal
Plumbing,11ft Porch w / (2) 8 × 6, 75 HP Centrifugal Pumps, (1) Brandt MA
7.5 HP Agitator
425 bbl. Mud Intermediate Tank, Flat Bottom Tank w / Internal Plumbing,
Mud Jets, (1) Brandt 7.5 HP Agitator and (1) Lighting7.5 HP Agitator
480 bbl. Suction Tank (3) Compartment Flat Bottom Tank w / Internal
Plumbing, Mud Jets, 11ft Porch with (2) 8 × 6, 75 HP Centrifugal Pumps, and
(3) Brandt Max 2000 7.5 HP Agitators
(1) Brandt King Cobra Single Linear Shale Shaker
Brandt Desander w / (2) 12" Cones
Brant Model SE-12 Cone Desilter w / (12) 4" Cones

Well Control Equipment :
Shaffer Model 14080-3s Closing Unit, 6-Station, 140 Gallon Capacity, w / 6-
Station Remote Panel
Hydril Type GK 13-5/8", 5,000 PSI Annular Preventer
Cameron 13-5/8", 5,000 PSI Double Ram Preventer
Drilling Spool 13-5/8", 5,000 PSI w/(1) 4 -1/16" Flanged Side Outlet and (1)
2-1/16" Flanged Side Outlet
Cameron 5,000 PSI Choke Manifold on 8ft 6"W × 17ft 0"L Skid

Auxiliary Equipment :
a) Change House
b) Parts House
c) Elevator Links, 3" × 132"
d) Automatic Driller
e National Model D Dead Line Anchor
f) Martin Decker Type D, Weight Indicator, 500,000 lbs. capacity
g) Tongs, Varco BJ, Type HT-55
h) Upper Kelly Valve
i) Lower Kelly Valve
j) Kelly Spinner
k) Pipe Spinner
l) (2) Ingersoll-Rand, Model K6U, 10,000# Air Hoists
m) Rotary Tongs, Elevators, and Handling Tools
n) (8) Steel Framed Rig Mats
o) Suitcase Electrical Distribution
p) Wire Line Unit
q) Rig Manager Quarters
r) 12 Person Crew Quarters
s) Reserve Pit Pumps, (2) 8 × 6, 75 HP Centrifugal Pumps

Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

--------------------------------------------------------------------
Search words(for official use only) -
OIME SL-7 Mechanical Drilling Rig for Sale
1200 HP OIME SL-7 Drilling Rig for sale
OIME SL-7 Land Drilling Rig for Sale
Drilling Rig - OIME SL-7 for Sale in USA
Mechanical Land Drilling Rig for Sale in USA
--------------------------------------------------------------------

OIME SL-7 Drilling Rig For Sale

ID 2592

Worldoils Marketplace

Corsair 550Hp Drilling Rig For Sale

ID 2593

Used Ingersoll-Rand Drilling Rig 2001 built

Worldoils Marketplace

Worldrigs ID: WR165

Ingersoll-Rand DM-M2 Drill Rig for Sale
Used Drilling Rig 2001 Built for Sale

Model : DM-M2 Drill Rig (Blast Hole)
Manufacturer : Ingersoll-Rand
Year : 2001
Condition : Used

Description :

2001 Ingersoll-Rand Drill DM-M2 Drill Rig (Blast Hole)
Meter Reads 35,316 hours
Note : CAT Engine and all components overhauled/rebuilt around 3,500 hours of use since
CAT 3412 Diesel Engine
IR 1250 cfm / 350 psi Air Compressor
Spur Gear Power Head
Carousel
4 Hydraulic Leveling Jacks
Inside Cab with A/C & Heater & Control Station
Location : USA

Price & terms : Please enquire using the email form below.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------------------
Search words(for official use only) :
Ingersoll-Rand DM-M2 Drilling Rig 2001 Built for Sale
Used Ingersoll-Rand Drilling Rig 2001 built
Land Drilling Rig for Sale
2001 Built Ingersoll-Rand DM-M2 Drill Rig for Sale
Used Drilling Rig - Ingersoll-Rand DM-M2
2001 Built Drilling Rig for Sale
-------------------------------------------------------------------------------------------------------

Drilling Rig - Ingersoll-Rand DM-M2 - 2001 Built for Sale

ID 165

Atlas Copco T4W Drilling Rig 2005 Built for Sale

Worldoils Marketplace

Worldrigs ID: WR311

Used Drilling Rig Atlas Copco T4W - 2005 Built
Atlas Copco T4W Drilling Rig For Sale

Model : T4W
Manufacturer : Atlas Copco
Year : 2005
Condition : Used

Description
2005 Atlas Copco T4W drill rig
3,785 Hours as of August 2011
IR HR2.5 1250 cfm / 350 psi air compressor
Cummins QSK19C Diesel Deck Engine at 755 HP
50,000 lbs of Pullback
25 GPM CAT 2520 Bean Water Injection Pump

Hammer Lubricator
3 Carousels - (2) 4 Rod & (1) 7 Rod
Worm Gear Head
2 Speed Fan
375' ft of used Drill Pipe (25' x 4 1/2" x 3 1/2") and basic hand tooling included
6" & 8" used Hammers & Bits included
Lincoln Welder on board
Paint in Very Good Condition

Mounted on a CCC (Crane Carrier Company) truck
CAT C13 Diesel engine @ 380 HP
16,880 Low Miles on gauge as of August 2011
Tires (Very Good Condition)

Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------------
Search words(for official use only) :
Used Atlas Copco T4W Drilling Rig 2005 Built
Used Land Drilling Rig For Sale
Drilling Rig 2005 built for sale
Drilling Rig for sale in USA
Atlas Copco T4W Drilling Rig For Sale
-------------------------------------------------------------------------------------------------

Drilling Rig - Atlas Copco T4W - 2005 Built for Sale

ID 311

New 475 HP Five Axle Carrier Mounted Workover Rig

Worldoils Marketplace

Worldrigs ID: WR652

Five Axle Carrier Mounted Workover Rig
475 HP New US made Land Workover Rig For Sale

Specifications

5 Axle Carrier 96' 250,000# Derrick
C-15 CAT engine
4500 OFS Allison Transmission
Drawworks with disct assit, 450hp right angle gear box

42x10-38x8 double drum
Hydraulic leveling jacks
Hydraulic raised and scoped
Derrick boards fully automatic

Front end - 20,000#EACH/40,000#
Rear end - 23,000#EACH/46,000#
25,000# TAG~LE
Front tire size 38565R22.5
Rear tire size 11R22.5

10% down payment required before converting to a final invoice before painting.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

--------------------------------------------------------------------------------------------------------
Search words(for official use only) -
Five Axle Carrier Mounted Workover Rig
New Workover Rig For Sale
Workover Land Rigs for sale
New Land Rigs from America - Workover Rig
450hp Workover Rig For Sale
500hp land workover Rig for sale
Land Rig for Sale - New 475hp Rig
US made Land Rigs For Sale
475hp Workover Rig For Sale
All American made workover rig - new
-------------------------------------------------------------------------------------------------------

Five Axle Carrier Mounted - New Workover Rig 475 HP - For Sale

ID 652

Worldoils Marketplace

Worldrigs ID: WR676

Mechanical Trailer Mounted Drilling Rig for Sale
Land Drilling Rig for Sale - 1000 HP Mechanical Trailer
1000 HP Trailer drilling rig for sale
1000HP - Mechanical Trailer Package

The 1000 H.P. Trailer Rig Package is designed to meet the demands of our customers for today’s competitive market. We pride ourselves on doing the little things necessary that it takes to supply our customers with the latest innovative technology. When designing rig packages we try to meet three simple goals. All rig components must :
1. Operate Properly.
2. Rig up quickly.
3. Transport in the fewest loads possible.

Using these principles, we have designed this rig package to meet and exceed all of our customers needs.

I. Hoisting Equipment
i. Mobile drilling trailer mounted type 1000HP, with single drum drawworks, two Detroit series 60 14.0 liter engines with two Allison S6610H transmissions with hydraulic torque converter. Mast height 118 ft., load capacity-425,000 lbs. (210 ton API). Rig mounted on a 4-axle chassis.

A. Group I. Basic Rig
a. Drawworks – OEM-1000
i. Disc Brake System – Two (2) 60” O.D. x 4” Thick water cooled disc: Four (4) brake calipers w/park feature, each caliper can develop 48,000 ft-lbs @ 100 psi. Maximum 900 rpm calipers have a park feature rated @ 28,000 ft-lbs each. Manufacturer = Kobelt
ii. Air Clutch – Two (2) 30” diameter friction disc, slip torque rating 54,500 ft-lbs @ 100 psi, maximum 760 rpm, 1664 sq in lining area. Manufacturer = Witchita.
iii. Drum 24” O.D. x 40” length with Lebus groove system
iv. Centralized Lubrication System
v. Drill line Diameter-1 1/8”
vi. Drive Chain - Four-strand, 1 ½” pitch
vii.Total Disc Brake Area - 1680 sq. inches

b. Auxilary Brake
i. Air Operated : Water Cooled Disc with copper alloy wear plates, mounted to frame, coupled directly to drum shaft. Two (2) 36” Disc rated @75,000 ft-lbs @100 psi maximum 640 rpm.
ii. Size-236 or equal
iii. Maximum Pressure - 100 psi
iv. RPM-640
v. Direct Coupled Drum shaft.

c. Combined Gear Box
i. Combined right angle drawworks drive drop box with one output shaft for rotary drive and one output shaft (unused) for additional components.
     1. One input shaft with 1810 drive flange.
     2. Top right shaft - drawworks drive, air engaged 1.0 to 1 ratio keyed shaft
     3. Top lower shaft - rotary drive, air engaged 1.1489 to 1 reduction ratio keyed shaft.
     4. Bottom lower shaft – Future or additional components, opposite top lower shaft, air engaged, 0.9787 to 1 ratio (1.0217 to 1 ratio increasing), 1810 drive flange.
ii. Gear type lubrication pump mounted intermediate shaft provides positive lubrication to bearings.

d. OEM 118’-0” x 425,000# Telescoping Mast
The 118ft., mast provides is a telescoping design, manufactured in accordance with API and Drilling Structures Int’l Inc.’s strict quality control processes. The mast includes an automatically deployed racking board.
i. A telescoping derrick with open face derrick design, manufactured to API 4-F specifications. The open face design utilizes structural steel construction, which allows for maximum block clearance. Derrick includes a ladder from rig floor to crown and a block cradle with chain & hook for securing block during transport.
iii. Base Section :
a. A-leg style base section hinged to carrier frame. (2) Turnbuckles attached from bottom of derrick base to carrier frame allow for mast angle adjustment. The well-side derrick legs have manual screw jacks.

ii Specifications
Mast Height : 118’
No. of lines to Block : 8 or 10
API Operating Hook Load -
8-Lines : 340,000 lbs
10-Lines : 425,000 lbs

Drilling Line Size : 1-1/8 in.
Racking Board Height : 55ft., 58ft., 70ft.
Racking Board Capacity
5 in. Drill Pipe : 12,400 ft.

iii. Base Section :
a. A-leg style base section hinged to carrier frame. (2) Turnbuckles attached from bottom
of derrick base to carrier frame allow for mast angle adjustment. The well-side derrick
legs have manual screw jacks.

iv. Lower Section :
a. 6 in x 6 in x 3/4 in angle main legs, with 6 in x 4 in x 3/8 in rectangular tubing “back” braces. Lower section of mast hinges to top of derrick base and rests on headache rack during transport.

v. Upper Section :
a. Angle construction. 6 in x 6 in x ¾” upper legs, with 3 in x 3 in x 3/8 in “back” braces. Upper section rests inside lower section until mast is raised. Upper section then telescopes hydraulically upward from lower section and locks in place with automatic latching pins.

vi. Crown Block :
a. Crown block is set up for a 8 or 10 line string-up. Crown sheaves are grooved for 1-1/8 in. Wire line. All sheaves are mounted on tapered roller bearings with grease certs for ease of maintenance.
b. Crown includes : (1) one 30 in fast line sheave, and (4) four 24 in crossover sheaves.

vii. Racking Board :
a. The mast includes an all welded racking board. The racking board automatically deploys as the mast is extended.

viii. Derrick Raising System :
a. The derrick is designed to utilize two, 72”x 9” x 3-stage, double acting raising rams and one 50’ x 7” single-stage telescoping cylinder.

ix. Guylines :
a. Derrick includes (2) load guys from the crown to carrier and (1) set of wind guys that meet or exceed API specifications.

e. Hydraulic Catworks :
a. Hydraulic break out cylinder for breaking out pipe connections, 4 ft. stroke, maximum pull load 20,000 lbs. Installed on the mast. Includes cable, roller guides and hydraulic piping.
b. Hydraulic make up cylinder for making up pipe connections, 4 ft. stroke, maximum pull load 20,000 lbs. Installed on the mast. Includes cable, roller guides and hydraulic piping.
c. Controls are located at the operator’s console.

f. Traveling Block Limit Switch (Crown Block Saver)
a. Safety device for limiting traveling block raising. Installed at the main drum to activate the main brake when traveling block is up to a pre-determined height.

g. Deadline Anchor
a. Dead line anchor to be used with compression type weight sensor. Drum type, mounted on carrier frame in front of drawworks frame.

h. Diesel Engine
a. Two Detroit series 60 - 14.0L engines rated at 600 BHP each@ 2100 RPM’s, 6 cylinders (inline) complete with DDC electronic control system.
b. Includes : Radiator, Heavy Duty Blower, 24V starter and alternator, variable speed governor, full instrumentation (ignition switch, ddr connector, electic throttle, electronic display module), two (2) 12v batteries and spark arrestor muffler.
c. Specifications : 600 BHP @ 2100 RPM, 1650 lbs/ft @ 1100 RPM

i. Transmission
a. 5 speed (6th gear locked out), automatic, Allison S6610H or equal w/torque converter, oil cooler. Dual air/hydraulic operation. Max. capacity 850 HP, 2500 RPM, 2300 ft-lbs input.

j. Compound Gear Box
a. Compound gear box, dual input, single output, may be drive with one or both engines.
b. Two input shafts, air engaged, 1810 drive flange (engagement of either input or a combination of both)
c. Single output, 1810 drive flange, ration 1.0271 to 1 to combination gear box.
d. Gear type lubrication pump. Mounted to output shaft provides positive lubrication to bearing.

k. Power Take-off
a. Chelsea 852 XB or equal, Used for hydraulic pump drive, mounted on transmission, 95 HP @ 1000 rpm output.

l. Hydraulic System
a. Two hydraulic gear pumps, one 500 gallon hydraulic tanks with containment pan, filters, heat exchanger and sight glass. Capable of producing 50 gpm @ 3000 psi, pressure return and circulation filters with visual indicator, 3000 watts portable generator, inline flow meter, system safety release valve, circuit breaker panel for heater/valve bank, operator panel with selector switch.
b. Custom built valve bank, 15 station manifold, prewired control panel and hand held remote with the following functions :
i. Mast lower/raise
ii. Mast telescope up/down
iii. Two (2) hydraulic pilot operated directional valve and joystick for winches.
iv. Six (6) leveling jacks.
v. D.S. sub raise/lower
vi. ODS sub raise/lower
vii. Make up/Brake out tong cylinders with remote torque adjustment
viii.Flow dividers for mast raise and sub cylinders
ix. Electrical control panel, remote controls and function switches for above
x. Velocity fuses on all cylinders for fall protection

m. Air System :
a. Air system with on (1) 60 gallon receiver to provide air to main air line and brake system. Includes air lines, control valves, pressure gauges.

n. Air Compressor :
a. Air compressors with direct drive, mounted on engine.
b. Reciprocal type, 28 CFM capacity

o. Operator’s Controls :
a.   Operator’s console to include the following controls and instrumentation:
i.    Main drum brake lever
ii.   Main drum clutch controls
iii. Two engine throttles – One (1) hand and one (1) foot
iv. Shift levers for two 4-speed transmissions
v.   Two emergency engine shut downs
vi. Hydraulic pump controls
vii. Two mud pump engine regulators
viii. Mud pump engine emergency shut down
ix. Mud pump clutch controls
x.   Instrumentation Air Pressure Gauge
b. All air operated controls are located in the central part of the console and have identifying tags. Console is located to provide good visibility of traveling block, work floor and racking board.

p. Engine Emergency Shut Down :
a. One engine emergency shut down valve for emergency engine stop. Located at the operator’s console.

q. Trailer Mounted :
a. A heavy duty 4-axle trailer with air suspension and 109,000 lb. total capacity.
b. All lights and brakes are equipped for attachment to the truck
c. Spring brake chambers for safety.

r. Tires (12.00 x 22.5, Pirelli Radial) 16 each
a. All tires, disc wheels, 16 tires mounted as dual. Tire rating 109,000 lbs. total, all tires inflated to 100 psi.

s. Suspensions
a. One (1) two axle, single point bogey at rear.
b. Two single axles with air bags, air can be dumped for backing into position
c. All axles are 12.5 metric ton capacity.

t. Four Pedestals for Hydraulic Jacks
a. Pedestals under front jack for rig stability. Four pedestals require. There are to be six jacks for leveling the rig.

u. Six Hydraulic Jacks
a. Six hydraulic leveling jacks to take off the load from the axle and provide horizontal position of the rig during operation. Each jack is operated by its own controls and is equipped with screw with thrust nut, which allows relieving hydraulic pressure from he jacks during rig operation. Controls are located at the mast supports.

v. Fuel Tank
a. Mounted on the side of the chassis

w. Auxiliary Hydraulic Winch (2 winches using one for spare) :
a. Braden or equal hydraulic winch with 12,000 lbs. pull load at the first layer, 336 fpm @ 65 GPM and 2400 psi.
b. Hydraulic brake and spooler
c. Sheave is mounted on the crown

x. Rotary Table Drive
a. One rotary table drive with driveshaft and two air clutches(one for rotary on and off, second for emergency shut down)
b. Controls are located at the operator’s console

y. Rotary Table Drive Chain Gear Box :
a. Includes three oil-greased shafts inside full-length guard, complete with sprockets, flanges, chains and chain gear-box with one shaft to connect to rotary table. One lower section mounted on the trailer, one upper section mounted on the sub and one flanged driveline between.

Group II
A. OEM Hydraulically Telescoping 17-425 Substructure
1) Material and labor to fabricate one (1) OEM hydraulic telescoping 17-425 substructure as per the following :
i. Hydraulic Telescoping Substructure with :
- 425,000# Rotary beams
- 300,000# Setback.
- Clear height under rotary beams = 14’
- Transportation height 12’-6”
- Base dimensions 45’L x 12’-6”W
- Working floor dimensions 20’ x 26’
- Rathole and mouse hole locations
- Two tong backup posts
- Removable braces in cellar area.
- Provisions for attaching mast support beam.
- Supply and installation of four (4) hydraulic scoping cylinders.
- Pull out post for guy wires to front of mast.
- Removable flooring around rotary table area.
- B.O.P. Dolly and tracking.
The above substructure to be fabricated under A.P.I. 4F guidelines. Upon completion, substructure to be tagged with OEM A.P.I. 4F nameplate.

B. Mud Boat :
i. Material and labor to fabricate one (1) mud boat. Mud boat complete with :
1. Supports under jacks on carrier.
2. Pipe guides for tires
3. Pin connections to mast support beam.
4. Loading hitches on one end

C. Mast Support Beam/Brake Water Tank/Trip Tank Combo
i. Material and labor to fabricate one (1) mast support beam/trip tank/brake water tank combination. Combination complete with :
1. Brake Water Tank - Material and labor to fabricate one (1) break water tank. Tank to be enclosed for rig up winterization.
a. Tank to have the following :
i. Tank bottoms to be 3/8” plate.
ii. Tanks constructed with ¼” v-crimp.
iii. Tank rims to be 4” square tubing.
iv. Access ladder
v. Man way
vi. Tong buckets, guides, and safety cage.
vii. Supply and installation of :
1. Two (2) 2 x 3 centrifugal pumps
2. Heat exchanger

2. Trip Tank – Material and labor to fabricate one (1) trip tank. Tank to be enclosed for rig up winterization.
a. Tank to have the following:
i. Tank bottoms to be 3/8” plate.
ii. Tanks constructed with ¼” v-crimp.
iii. Tank rims to be 4” square tubing.
iv. Access ladder
v. Man way
vi. Tong buckets, guides, and safety cage.
vii. Provisions to mount:
1. One (1) 2 x 3 centrifugal pumps

3. Mast Support Beam – Material and labor to fabricate one (1) three runner mast support beam.
a. Support beam complete with:
i. Supports for carrier jacks and bottom base of mast.
ii. Loading hitches on both ends for tailboarding.

D. Rig Floor Stairways – All stairs to meet OSHA standards with no slip grip strut stair treads.
i. Three (3) 17’-0” stairway from substructure floor to ground level. Stairs to be built on a 45-degree angle.
ii. One (1) 9’-6” stairway from top of the substructure to top of mud tank. Stairs to be built on a 45 degree angle.

E. V-Door Ramp - Ramp to be fabricated to work with a 17-0” floor height substructure and an 18” catwalk. Ramp to be fabricated with ½” plate and 3” pipe guides.

F. Catwalk – One 50’ x 5’-0” x 18” catwalk with snatch post mounted on one end.

G. Doghouse - House to be fabricated on a three-runner oilfield type skid with loading hitches on both ends for tailboarding. House to have checker plated flooring, v-crimped wall construction, and an arched type roof. House complete with the following :
1. 4’-0” porch on one ends
2. 2’-0” walkway on the back side of the doghouse running to full length.
3. Handrails around house perimeter.
4. One sliding doorway to rig side.
5. One swing type doorways on both ends with windows built in.
6. Two (2) windows on the back side wall
7. Knowledge box
8. Three compartment workbench.

Group III - Prime Mover Drive
A. Lighting System –Heavy Duty explosion proof Fluorescent and Mercury Vapor Lightning System designed to use with Mast and Substructure, Mud System, complete with Plug, Receptacles, Cable, Cable Clamps and all necessary Leads and fitting. Lighting System consist of: Mast and Racking Platform, Substructure Lighting, Mud Tanks and Mud Pumps, and Utility House, including Battery emergency light at Driller’s console certified for Class 1 Division 2.

B. Engine/Generator/Part/Change Package
a. Utility House - “New” - Material and labor to fabricate one (1) utility house. House (43’x 12’ x 9’) to be constructed on an oilfield type skid (45’x 12’x 18”) with loading hitches on both ends for tailboarding. Top of skid covered with ¼” checker plate.
i. Parts/change house to be complete with :
1. Twenty (20) lockers.
2. Changing bench near lockers.
3. Two sets of shelves on each wall running 8’-0”.
4. One (1) bench on each wall. Bench compartments to be 5’-0” with folding bench. Two compartments to have ventilation to the outside for paint storage.

ii. Generator house complete with :
1. One (1) 8’-0” sliding door on side of the generator location
2. Provisions for mounting one (1) electrical plug panel.
3. Radiator end of skid left open.
4. Skid designed for generator tie downs to be mounted on cross beams of skid for safety.

b. Generator – Two (2) Detroit 60 Series 14L.

c. Electrical Specifications
i. Item 1 – Clarification
1. Prime mover specifications were not provided; IEC Systems assumes the engine and generator sizes as listed in this proposal.
2. The generator house will be designed to accommodate the “Three Tank Drilling Rig Standard” and thus be interchangeable with all rigs that meet the standard
3. IEC System proposal is based on performing the installation in Houston, Texas. All components listed below will be installed and tested
4. Customer will furnish the voltage regulator and voltage rheostat

ii. Item 2 – Generator Houston Electrical System For a Mechanical Rig
1. Generator House 480 VAC Switchboard
   a. 1 ea - A/C Generator Control Panel by IEC Systems for the control of two (2), 450 kW, 480 volt, 3 phase, 4-wire, 60 Hertz, A/C generators.
   b. Switchgear to contain full instrumentation and will not be designed for full parallel operation of generators.
   c. Switchboard will be NEMA Type 1 enclosure with ASA #61 gray enamel finish, designed to meet NEMA and OSHA specifications.
   d. All nameplates will be constructed of plastic plates, black on white for names and red on white for warnings.

GENERATOR CONTROLS MOUNTED IN THE SWITCHGEAR WILL CONSIST OF:
2 - Generator Main Circuit Breakers (Gen PWR)
2 - Generator "Power Available" Indicating Lights
2 - Voltmeters
2 - Voltmeter Switches
2 - Ammeters
2 - Ammeter Switches
2 - Frequency Meters
2 - Reverse Power Relays
1 - Ground Detection System
2 - Governor Control Switches
2 - Wire to Customer Furnished Voltage Regulators
2 - Wire to Customer Furnished Voltage Rheostats
1 - Lot Current Transformers, Potential Transformers, Fuse Blocks, Fuses, Buss Bar, Switchboard Wiring, and related equipment

Switchboard will be fully assembled, wired, and shop tested.

2. Generator House 480V Motor Control Center (MCC)
a. 1 ea - 480 Volt, 3-phase, 60 Hertz A/C Motor Control Center, equipped with braced horizontal and vertical bus
b. Enclosure will be NEMA Type 1 with front only access
c. Motor starters will be combination, full voltage- non-reversing with 3-pole overload blocks, heaters, control power transformer, operating handle, fuses and start/stop controls in cover with red "RUN" indicating lights
d. 480V MCC Motor Starters

i. Five (5) Size 4 Starters for :
   1 ea 60 HP Mud Mixer 1
   1 ea 60 HP Mud Mixer 2
   1 ea 60 HP Desander
   1 ea 60 HP Desilter
   1 ea Spare

ii. One (1) Size 3 Starter for:
    1 ea 40 HP Trip Tank

iii. Five (5) Size 2 Starters for:
   1 ea 20 HP Drill Water 1
   1 ea 20 HP Drill Water 2
   1 ea 25 HP Brake Cooling Pump 1
   1 ea 25 HP Brake Cooling Pump 2
   1 ea Spare

iv. 480 V MCC Motor Feeder Circuit Breaker
1. 1 ea - 150 AMP 3 Pole Circuit Breaker for Camp Feeder

3. Generator House 480V Distribution Panel Boards
a. 1 ea - 480V POWER DISTRIBUTION PANEL BOARD (P1)
i. 480V, 3-Phase, 3-Wire
ii. NEMA 1 Enclosure
iii. 600A MLO with Feed-Thru Lugs
iv. 36 CKT with branch Circuit Breakers for the following loads:
     a. 1 ea - 100A/3-Phase CB for 75 KVA Lighting Transformer
     b. 1 ea - 60A/3-Phase CB for BOP Accumulator (30 HP)
     c. 1 ea - 60A/3-Phase CB for Spare
     d. 1 ea - 30A/3-Phase CB for Agitators 1, 2 Feeder (10 HP each)
     e. 1 ea - 30A/3-Phase CB for BOP House Heater (15 kW)
     f. 1 ea - 30A/3-Phase CB for Change House Heater (15 kW)
     g. 1 ea - 15A/3-Phase CB for Liner Washer 1 (3 HP)
     h. 1 ea - 15A/3-Phase CB for Liner Washer 2 (3 HP)
     i. 1 ea - 20A/3-Phase CB for Fuel Pumps 1 & 2 Feeder (3 HP each)
     j. 1 ea - 20A/3-Phase CB for Shale Shaker 1 & 2 Feeder (5 HP each)
     k. 1 ea - 30A/3-Phase CB for Spare
     l. 1 ea - 30A/3-Phase CB for Wireline (15 HP)

b. 1 ea - 480V DISTRIBUTION PANEL BOARD (P2)
i. 480V, 3-Phase, 3-Wire
ii. NEMA 1 Enclosure
iii. 600A MLO with Feed-Thru Lugs
iv. 30 CKT with branch Circuit Breakers for the following loads:
     1. 1 ea   100A/3-Phase CB for Hydraulic Power Unit (HPU), (50 HP)
     2. 1 ea   100A/3-Phase CB for Air Compressors #1 & 2 (25 HP each)
     3. 1 ea   20A/3-Phase CB for Vacuum Degasser (7.5 HP)
     4. 1 ea   30A/3-Phase CB for Dog House Heater (15 kW)
     5. 1 ea   60A/3-Phase CB for Agitators 3, 4, 5 Feeder (10 HP each)
     6. 1 ea   30A/3-Phase CB for Hopper House Heater (15 kW)
     7. 1 ea   40A/3-Phase CB for Spare
     8. 1 ea   60A/3-Phase CB for Spare
     9. 1 ea   30A/3-Phase CB for Spare
     10.1 ea 30A/3-Phase CB for Spare

4. Generator House 120/208 Distribution Panel Board
a. 1 ea - 120/208V DISTRIBUTION PANEL BOARD (P3)
i. 120/208V, 3-Phase, 4-Wire
ii. NEMA 1 Enclosure
iii. 225 MLO, Top Feed
iv. 42 CKT with branch (124/240V-10 KAIC) Circuit Breakers for the following loads:
     1. 1 ea -   100A/3-Phase CB for Rig Floor Lighting Panel
     2. 1 ea -   100A/3-Phase CB for Spare
     3. 1 ea -   100A/3-Phase CB for Boiler House Feeder
     4. 1 ea -   60A/3-Phase CB for Spare
     5. 1 ea -   30A/3-Phase CB for Spare
     6. 10 ea - 20A/1-Phase CBs for Lighting Circuits 1 thru 10
     7. 1 ea    20A/1-Phase CBs for Engine/Generator House Steam Heater Blowers
     8. 1 ea    20A/1-Phase CBs for Trip & Shaker Tank Steam Heater Blowers
     9. 1 ea    20A/1-Phase CBs for Mud Pump 1 & 2 Steam Heater Blowers
     10. 1 ea 20A/1-Phase CBs for Mixer Skid Steam Heater Blowers
     11. 1 ea 20A/1-Phase CBs for Engine/Generator House Lighting Circuit
     12. 1 ea 20A/1-Phase CBs for Generator 1 & 2 Block Heater Feeders

5. Generator House Plug Board
a. 1 ea Metal shroud protected weatherproof receptacle panel with matching plugs for all the above starters and circuits having cables that exit the Generator House.
b. Receptacles to have protective vapor proof caps. Plugs and receptacles will be permanently identified.
c. 480V Plug and Receptacle sets provided for the plug board include all loads listed above in Section C and D (MCC and Panel Board Loads)
d. Additional Plug Board Spare Plugs and Receptacles
    6 ea   30A, 3-Pole, 480V
    5 ea   60A, 3-Pole, 480V
    2 ea   100A, 3-Pole, 480V

6. Generator House 480/208-120V Rig Lighting Transformer
a. 1 ea 75 KVA Transformer with 480V Primary and 120/208V Secondary mounted in a drip-proof enclosure. Primary Power will be from the P1 Panel Board.

7. Generator House Power and Control Cabling
a. 1 lot A/C Power and Control Wiring by IEC Systems to connect two 450 KW, 480 volt, 60 Hertz A/C generators to 480V Switchboard
b. All A/C generator power cables with 90°C rates insulation sized/de-rated for use in 45°C ambient atmosphere.
c. 1 lot Glastic Plates to prevent excessive heat caused by electrical fields where power cables enter generators.
d. 1 lot A/C Power and Control Wiring to connect A/C generator control panel to:
i. MCC
     1. P1 Panel Board
     2. P2 Panel Board
     3. P3 Panel Board
     4. 75 KVA Lighting Transformer
     5. Generator House Plug Board (receptacles)

8. Generator House Lighting
a. Generator Sheds Lighting receptacle string complete with plugs and receptacles, cable, cable clamps, and all necessary leads and fittings to accommodate the following :
i. 4 ea - C1D2 Hazardous Area fluorescent fixtures complete with lead
ii. 1 ea - C1D2 Hazardous Area Metal Halide floodlight fixture complete with lead
iii. 1 ea - Mounting Stanchions for Floodlights

Group IV - Rotating Equipment
B. “New” American Block Traveling Block and Hook
a. 250 Ton Traveling Block, API load rating: 250 Ton, sheave groove 1 1/8”.

C. “Rebuilt” National C275 Rotary Table and Accessories
a. 27 ½” rotary table with 27 ½” table opening, static load capacity : 650 ton, gear ratio 3.6 : 1, torque cap : 30,000 ft-lbs @ 60 rpm.

D. “Rebuilt’ Rotary Swivel
a. 250 Ton

Group V - Circulating Systems
A. Two “New” Mechanical Drive 1000HP Mud Pumps
a. Two (2) “New” Eweco - 1100HP Mud Pumps
b. Two (2) “New” Detroit D2000 Engines
c. Unitized on one common skid with:
i. Model C-300-100F(H) OWI Torque Converter
ii. Belt Drive
iii. Dual 24” Eaton Airflex
iv. Drum Hub for 24” Dual Clutch
v. Drum Flange, external 24”
vi. 5 x 6 Centrifugal pump
d. Control system including :
i. Air throttle
ii. Air valve to engage and disengage clutch
iii. Hoses and mounting hardware.

B. Two Tank 850 BBL Mud System - Material and labor to fabricate one (1) two tank 850 bbl mud system as per our discussions. OEM to completely fabricate tanks (40’ x 10’-6” x 7’-0”) on a three runner oil field type skid (50’ x 7’-10” x 8”) with loading hitches on both ends for tail boarding. Tanks to have internal ladders to each compartment, equipment supports, fold down type handrails and covered with galvanizes bar grating .Mud system to consists of the following :

i. Shaker Tank – Four equal compartments
- Shale Pit
• 10’-0’’ compartment
• One (1) cleanout
• One (1) overflow
- Desander Pit
• 10’-0 compartment
• One (1) cleanout
• One (1) overflow
• One (1) 6” suction line from 5 x 6 centrifugal pump.
• One (1) 8” equalizer. Bottom mounted with top mounted handle.
- Desilter Pit
• 10’-0’’ compartment
• One (1) cleanout
• One (1) overflow
• One (1) 6” suction line from 5 x 6 centrifugal pump.
• One (1) 18” equalizer. Bottom mounted with top mounted handle.
• Equipment supports for one (1) 10 HP agitator
- Degasser Pit
• 10’-0’’ compartment
• One (1) cleanout
• One (1) overflow
• One (1) 8” bottom equalizer and one (1) 8” top equalizer.
• Equipment supports for one (1) 10 HP agitator.
- 9’-0’’ Porch
• Able to accept two (2) 5 x 6 centrifugal pumps
• 10’’ equalizer line to Suction Tank.
• Covered with ¼’’ Chk’d floor plate.
• Overhead plated roof.

ii. Suction Tank – Two Compartments
- Suction compartment
• 30’ – 0’’ compartment
• One (1) cleanout gate.
• Two (2) 6” suction lines going to main mud pumps.
• Equipment supports for two (2) 15 HP agitators.
- Pill Compartment
• 10’-0’’ compartment.
• One (1) cleanout gate.
• One (1) 8” equalizer. Bottom mounted with top mounted handle.
• One (1) overflow
• Equipment supports for one (1) 10 HP agitator
- Porch
• Able to accept two (2) 5x6 centrifugal pumps.
• 6’’ line to both pumps
• One (1) discharge dumping line
- Pill Tank
- Suction Tank

iii. Accessories
1. Single slide for shaker. Slide to mount to the side of the tank and fold down during transportation. Slide complete with 6” pipe end for hose hook up in the field.
2. Single slide for desander. Slide to mount to the side of the tank and fold down during transportation. Slide complete with 6” pipe end for hose hook up in the field.
3. Single slide for desilter. Slide to mount to the side of the tank and fold down during transportation. Slide complete with 6” pipe end for hose hook up in the field.
4. Fold down type walkways around shaker area complete with galvanized grating and removable handrails. Walkways to fold down during transport.

iv. Solid Control Equipment
1. Four (4) Mission Magnum 6 x 5 x 11 magnum1 with a 10.5 inch impeller, mechanical seal and hard iron material, all mounted on a mission fabricated steel base with woods style coupling, OSHA type coupling guard and a 75 HP 1750 RPM, 3 PH, 230/460 Volt, 60 Hz explosion proof electric motor.
2. Three (3) Derrick DE-AG-10 Agitators complete with 10 HP, 1800 RPM explosion proof C-face motor bolted to a gear box. Including shaft stabilizer, shaft and impeller.
3. Two (2) Derrick DE-AG-15 Agitators complete with 15 HP, 1800 RPM explosion proof C-face motor bolted to a gear box. Including shaft stabilizer, shaft and impeller.
4. One (1) Derrick two cone desander.
5. One (1) Derrick sixteen cone desilter.
6. One (1) Hopper with venturi.
7. One (1) Derrick Vacuum degasser 1200 GPM. Skid mounted with heavy duty 3 HP explosion proof 230/460 volt, 60 Hz, 3 Ph, 1800 RPM motor and manual starter with heavy duty vacuum pump.
8. Two (2) Derrick Flo-Line Cleaner 503 Shale Shakers w/weir feed complete with three panel screen frame, support structure, and explosion proof electrics with the following options :
1. A.W.D. (+7 deg uphill to –1 deg downhill)
2. Standard Screen Underflow hopper
3. Weir feed
4. Super G Vibrations Motors
5. Single side tensioning system
9. 36” Poor Boy Degasser on a separate skid.

VI. BOP
A. Six (6) Station Accumilator
B. Choke & Kill Manifold
C. Note – BOP to be supplied by others (Not include in pricing.)

VII Utilities
A. Air Compressor & Receiver
a. Two (2) Gardner Denver, ST-30, Electra-Saver II, rotary screw air compressor, Model EBE99Q. 30 HP, 460 volts, 3 phase, 60 HZ, TEFC, with NEMA 4 Control Enclosure.
b. Two (2) Steel Fab, 400 gallon, vertical air receivers with full skirt, 200 psi working pressure.Part # A12614. Unit is California Coded.
c. One (1) RNC250 air dryer for 250 CFM.

VIII. Instrumentation
A. Drift Indicator
Totco Double Recording Drift 0 to 8° and 0 to 14°. Clock complete with following :
- 1 ea. Godevil Kit
- 1 ea. Chart tool & Chart Reader
- 1 ea. Tool Maintenance Box w/ Tool
- 100 ea. Chart 0 to 8° and 0 to 14°
- 10 ea. Rubber Finger Stabilizer
- Fishing Tool 7 rope sockets

B. Indicator/Gauge & Counter
EMS-2 or Equivalent Rotary Torque indicator, Weight indicator, and Tong torque gauge, Circulating pressure gauge, two (2) ea. Pump stroke counter.

C. Drilling Recorder
EMS-2 or Equivalent Drilling recorder, 9 pen (weight, torque, penetration rate, pump pressure, rotary rpm). (Diameter 103 Dan Kurang 6 Buah Printed Circuit Board).

D. PVT
EMS-2 or Equivalent Pit volume totalizer, single channel with audio alarm and warning lights, four pit transmitters totalizing relay, gain and loss gauge with gauge zero devices. Full digital instrumentations.

E. Flow-Shoe-Device
EMS-2 or Equivalent Device complete with recorder and alarm system

Group IX - Fabrications
A. Accumulator/Junk Bend/Air Package Combo
a. Material and labor to fabricate one (1) accumulator/pipe bend skid as per our conversations. OEM to fabricate a three runner oilfield type skid (40’ x 10’ x 12”)
     covered with ¼” check plate. Piping to be done during rig up. Skids complete with:
i. One (1) arched type roof and enclosure.
v. Mounting supports for two (2) vertical air receivers.
vi. Mounting supports for one (1) accumulator.
vii. Mounting supports for:
     1. Two (2) air compressors
viii. Access doors
     1. One 36” swing type door way
     2. Two (2) 48” double door way.

B. Parts/Mechanic Shop - “New”
    Material and labor to fabricate one (1) parts/change house. House (38’x 10’x 9’) to be constructed on an oilfield type skid (40’x 10’x 12”) with loading hitches on both ends for tailboarding. Top of skid covered with ¼” checker plate. House to be complete with:
     • One (1) work bench and One (1) Table
     • Two sets of shelves on each wall.
     • Four (4) storage benches.

C. 500 bbl Water Tank
Material and labor to fabricate one (1) 500 bbl water tank as per our conversation. Tanks fabricated on oilfield type skids with loading hitches on both ends for tailboarding. Skid ends to be covered with ¼” check plate. Tanks complete with the following :
- Two (2) 3 x 2 x 11 Centrifugal pumps with 25 HP Motors
- Suction and Discharge Piping.
- Two (2) ladder rung to top of tank (In and Out)
- 4” Fill cap
- 2” Outlet
- 1” Drain

D. One (1) 12,000 Gallon Fuel Tank
Material and labor to fabricate one (1) 12,000 gallon fuel tank as per our conversation. Tanks fabricated on oilfield type skids with loading hitches on both ends for tailboarding. Skid ends to be covered with ¼” check plate. Tanks complete with the following :
- Two (2) fuel transfer pumps
- One (1) filter system.
- Suction and Discharge Piping.
- Two (2) ladder rung to top of tank (In and Out)
Top and Side man ways, 4” Fill cap, 2” Outlet, and 1 ½” Drain

E. Cable Trays - Material and labor to fabricate one (1) lot of cable trays as per the following. Cable trays to be fabricated as follows :
- Two (1) 40’-0” sections from substructure to fuel tank.
- One (1) 35’-0” section from mud tanks to main trays.
- One (1) 20’-0” section from substructure to main stairs.
- Cable trays complete with the following:
     • Hinged doors in 5’-0” sections with chain for each doorway.
     • Flat expanded metal running the length of each tray.
     • ½” round bar at each end of cable tray to provide protection when pulling wires.

F. Mud Gas Seperator and Transportation Skid - “New”
- Material and labor to fabricate one (1) 36” poor boy degasser and skid. Gas buster to me mounted on a three-runner oilfield type skid with loading hitches on both ends for tailboarding. Gas buster complete with :
     • 36” Pipe with weld caps on both ends.
     • Internal baffles.
     • All piping and pipe brackets.
     • Gas buster to elevate to working condition to allow operation under half full conditions.
     • Gas buster to be mounted in lay down position for transport and to be raised by truck for operation.

Group X - Rig Up Items
A. High Pressure Piping
a. Material and labor to fabrication one (1) lot of high-pressure piping. All piping to be 4” schedule 160 and all unions to be weld type 1002. High pressure piping complete as per the following:
   i. Standpipe
    1. Standpipe to be located on the Off-Driller’s Side.
    2. Standpipe to have hammer union breaks at mast sections so it can me transported without being taken off the mast.
ii. Standpipe Manifold
    1. The standpipe manifold will be complete with manifold type tee with two 2” outlets. Outlets to have hammer union connections only.
    2. The 4” outlets to have a 4” gate valve on the top of the cross.
iii. High Pressure Line
    1. The high-pressure line will run from the bottom of the standpipe manifold to the side of the mud boat
    2. The cellar line will be mounted to the mast support beam.
    3. There will be hammer unions at break of the substructures for transportation.

B. Structural set and assemble
a. Mast and Substructure
i. Mast accessories.
ii. Install flooring, handrails, v-door, stairs, etc.

C. Set and align
a. Rotary Table
b. Drawworks
c. Doghouse
d. Utility house control panel and foot drawworks console.
e. Mud Pumps
f. Brake water/trip tank
h.Water Tank/Fuel Tank
i. Catwalks and pipe racks
j. Cable Trays
k. Koomey/Junk basket

D. Piping, Fittings, hoses, valves, etc.
a. Water Supply
   i. To Mud system and mixing system
   ii. Rig Floor
   iii. Brake water system
   iv. Feed and return lines from brake water tank to drawworks drum and brake.
   v. Fuel System
        1. To feed and return lines from duel tank to generator set.
vi. Air System
        1. Air Supply for accumulator unit and rig floor
        2. Hose connections from rig floor air manifold to drawworks control console, air hoist and other floor tools
a. To generator set engine starters
vii. Miscellaneous
       1. Vibrator hoses.
viii. Electrical Rig Up
ix. Testing
     1. Fill mud tanks with water
     2. Provide lube products to all machinery.
     3. Provide Fuel for testing
     4. Circulate water through mud system
     5. Run air compressors.
     6. Pressure test all high pressure lines and connections to working pressure
     7. Run all solids control equipment.
     8. Load test generators
     9. Test all SCR assignments.
x. Rig Down
     1. Rig down and assist in load out on customer furnished trucks.

Delivery : Seventy-five to ninety (75-90) days from receipt of purchase order and down payment.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------------------------------------------
Search words (for official use only
MechanicalTrailer Mounted Drilling Rig for Sale
1000HP Land Rig Dealers
1000 HP Mechanical Trailer Drilling Rig for Sale
1000HP land Rig For Sale
1000HP Drilling Rig for Sale - Mechanical Trailer
Drilling Land Rig for Sale - 1000 HP
1000 HP Land Drilling Rig For Sale
Used 1000hp Mechanical Trailer for Sale in USA
1000hp Land Rig Builders
----------------------------------------------------------------------------------------------------

Mechanical Trailer Package - 1000HP

ID 676

Carrier Mounted Telescopic Mast, Double Drilling Rig

Worldoils Marketplace

550HP Carrier Mounted Drilling Rig for Sale

ID 2575

Worldoils Marketplace

650HP Carrier Mounted Drilling Rig for Sale

ID 2576

Carrier Mounted Telescopic Mast Drilling Rig

Worldoils Marketplace

350HP Telescoping Style Rig For Sale

ID 2577

Worldoils Marketplace

Worldrigs ID: WR663

VFD Land Rig for Sale
3000 HP Land Drilling Rig
3000hp SCR Drilling Rig

General Overview
Depth rating : 29,520 ft., (5”DP)
Horsepower : 3,000 HP
Max. Hook load : 1,500,000 lbs

Drawworks
Type : Single or Double Drum
HP rating : 2,000 HP
Drilling line : 1-3/4” EIPS
Main brake : Disc
Drive Type : A/C or D/C

Mast
Type : Cantilever
Height : 152 ft (Optional heights)
Static Hookload Cap : 1,500,000 lbs
Width at Drill Floor : 30 ft

Substructure
Type : Slingshot or Swing-Lift
Clear Height : 35 ft
Casing load : 1,961,560 lbs
Setback load : 800,000 lbs

Top Drive
Type : Varco TDS-8SA (Optional)
Rating : 750 ton Max.
Torque : 63,047ft/lbs

Rotary Table
Kelly Bushing : Pin Drive
Table opening : 37-1/2”

Power Generation
Generator type : Cat SR-4B (x 4)
Generator rating : 2,150 KVA (each)
Engine type : Cat 3516B (x 4)
HP rating : 1,860 BHP (each)

Mud Pumps
Type : F Series
HP rating : 1,600 HP
Pressure Rating : 5,000 psi

Power Control
Type : SCR or VFD (Optional)

Mud System
Active system capacity : 3,000 bbls
Reserve system capacity : Optional
Shale shakers : Brandt, Derrick

Instrumentation
Manufacturer MD Totco
Type Rig Sense

Desert Package
Rolling Gear & Trailers Optional

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

--------------------------------------------------------------------------------------------------------------------
Search words (for official use only) -
VFD Land Rig for Sale
US made 3000hp Land Rig For sale
New Chinese made Land Rig For Sale
SCR Rig Builders
3000hp Land Rig Brokers, Dealers
3000hp Land Rig For Sale
Land Drilling Rig For Sale
New Build Land Drilling Rig - 3000hp
3000HP SCR Rig
---------------------------------------------------------------------------------------------

VFD Land Rig - 3000hp - for Sale

ID 663

Chicago Pneumatic T670W Drilling Rig for Sale

Worldoils Marketplace

Chicago Pneumatic T670W Drilling Rig - For Sale

ID 1385

Worldoils Marketplace

Mobile B-59 Drilling Rig for Sale

ID 1416

Worldoils Marketplace

Mobile B61 HDX Drilling Rig for Sale

ID 1419

Texoma 600-30 Foundation Drilling Rig for Sale

Worldoils Marketplace

Texoma 600-30 Foundation Drilling Rig for Sale

ID 2571

Worldoils Marketplace

Worldrigs ID: WR293

Brewster N-45 Drawworks for Sale
Used Brewster N-45 Drawworks for Sale

For further information, please contact rigs@worldoils.com .

-----------------------------------------------------------------
Search words(for official use only) :
Used Brewster Drawworks for sale
Brewster Drawworks for sale
Used Brewster N45 Drawworks for sale
Drawworks for sale
-----------------------------------------------------------------

Drawworks - Brewster N-45 For Sale

ID 293

Worldoils Marketplace

1997 Built Trailer Mounted Super Single Slant Rig for Sale

ID 2578

Worldoils Marketplace

Cantilever Mast on Dolly Hydraulic Lift Triple Drilling Rig

ID 2579

Reichdrill C-700 Crawler Drilling Rig for Sale

Worldoils Marketplace

Reichdrill C-700 Crawler Drilling Rig - For Sale

ID 2570

Worldoils Marketplace

Sling Shot Hydraulic Lift Triple Drilling Rig for Sale

ID 2562

Worldoils Marketplace

Cantilever Mast on Dolly Hydraulic Lift Triple Rig for Sale

ID 2563

Worldoils Marketplace

2013 Built Swing Lift Triple Drilling Rig for Sale

ID 2564

Worldoils Marketplace

Parallelogram Style Land Drilling Rig for Sale

ID 2565

Worldoils Marketplace

2013 Built Carrier Mounted Telescopic Mast for Sale

ID 2566

Worldoils Marketplace

1000Hp Parallelogram Style - Telescopic Mast Double Rig

ID 2567

Worldoils Marketplace

1000Hp Parallelogram Style - Telescopic Mast, Double Rig

ID 2568

Worldoils Marketplace

2013 Built Carrier Mounted Telescopic Mast for Sale

ID 2569

Parallelogram Style Drilling Rig for sale

Worldoils Marketplace

2000HP Swing Up Triple Drilling Rig for sale

ID 2561

Worldoils Marketplace

2000HP Swing Up Triple Drilling Rig for sale

ID 2560

Soilmec R-620 Crawler Drilling Rig for Sale

Worldoils Marketplace

Worldrigs ID: WR832

Soilmec R-620 Crawler Drilling Rig for Sale
Drilling Rig - Soilmec R-620 Crawler - For sale

Model : R-620 Drill Rig - Crawler
Manufacturer : Soilmec
Year : 2006
Condition : Used

Description :

2006 Soilmec R-620 Crawler Drill Rig
Hours: 6,200
R-620
Hydraulic Drilling Rig
A new model : The R-620 drilling rig on caterpillar 3.30C high power
module has been designed to perform the follwing jobs :
Bored pile, with dry or bentonite system;
Bored pile, with casing installed by oscillator or rotary crowd system;
C.F.A (Continuous flight Auger) piles.

The main features of R-620 are the following:

Machine class: 60 tons
New machine caterpillar type 3.30C module c/w diesel engine and
sound proofed canopy,mounted on 360 degrees slew ring
New electronic engine C9 ATAAC wth more power(355Bhp) and
meeting the most recent emission regulations.
New powerful rotary : 201 kNm
Completely self erecting;mast able to withstand the max torque
over the whole length.
Casing installation by rotary crowd system
Advanced instrumentation
Reliability and safety
Stability and easy to handle
High productivity
Easy to transport
Cable crowd system(optional)
Mechanical and hydraulic pre - arrangement for casing

oscillator(available on request)

Large diameter bored pile
Max pile diameter	mm	1800
Max cased diameter	mm	1500
Max pile depth	m	66
Max nominal torque	kNm	201
Max drilling speed	rpm	34
Spin off	rpm	144
Main winch nominal line pull	kN	192
Service winch nominal pull	kN	80
Engine¹	type	Caterpillar C9 ATAAC-HEUI
Max power	Kw (bhp)	261(355)
Crowd system by cylinder	kN	210/150
Pull down stroke	mm	5600
Cable crowd system(13m stroke)	kN	200/200
Operating weight	ton	63

Continuous Flight Auger (CFA)
Max pile diameter	mm	900/1000
Max pile depth	m	22.5
Max nominal extraction force	kN	600
Max nominal torque	kNm	201
Max drilling speed	rpm	34
Operating weight	ton	60-63

Location : USA

Soilmec R-620 Crawler Drilling Rig - For Sale

ID 832

Worldoils Marketplace

Soilmec SR50 Drilli Rig For Sale

ID 2558

Worldoils Marketplace

Soilmec SR30 Drilling Rig - For Sale

ID 2559

Worldoils Marketplace

Four Axle Carrier Mounted Land Workover Rig - 375hp - for sale

ID 653

Worldoils Marketplace

Failing CF-15 Drill Rig for sale

ID 888

Nordic Drill DRC-10-A Crawler Drill Rig for Sale

Worldoils Marketplace

Worldrigs ID: WR2557

Nordic Drill DRC-10-A Crawler Drill Rig for Sale
2017 Built Nordic Drill DRC-10-A Crawler Drilling Rig for Sale

Model : DRC-10-A Drill Rig
Manufacturer : Nordic Drill
Year : 2017
Condition : Used

Description :

2017 Nordic Drill DRC-10-A Crawler Drill Rig

Has 2400 Hours since December 2018 & Drilled 96 Wells in 2017
and 92 Wells in 2018 to date.

All in One Drilling Rig with Dual Rotary, Crawler Mounted Carrier,
12" Max Openings & Slide Angle Mast with Advantages Compared to a
Conventional Air Rotary Drill.

Angle Slide Package:
Allows Drilling Applications for Mining, RC (Reverse Circulation)
Exploration, Anchors, Pilling, Geotechnical, Soil Samples, Etc.

Crawler:
Light Weight & Small means less damage to the drilling sites,
allows set up on difficult terrains & tight access sites,
and less preparation for set up and break down.

Dual Rotary:
Allows Accuracy & Performance in Tough Overburden Conditions,
Good Sampling & Screen Intallations, Facilitates The Extraction
of Casing, Easy to Operate & Cleaninesss on Sites.

Safety:
Offers Safe Drilling Methods, Provided of an Anti-Rotation System.

Top Drive:
Stroke: 16 ft
Hoist: 31,000 lbs
Hoist Speed: 53 ft/min
Pull Down: 23,500 lbs
Pull Down Speed: 71 ft/min
Torque: 6,000 ft x lbs
Rotation Speed: 0-90 RPM

Lower Drive:
Stroke: 10 ft
Hoist: 35,000 lbs
Hoist Speed: 47 ft/min
Pull Down: 26,500
Pull Down Speed: 63 ft/min
Torque: 21500 ft x lbs
Rotation Speed: 0-9 RPM
Maximum Opening: 12"
Engine: CAT C 6.6 Diesel @ 210 hp (Tier 3)
Sliding Mast Stroke: 36"
Welding machine: Hydraulic 225 AMP
Water Pump: Quad Bean 18 GPM
Hydrofrac Pump: 26 GPM @ 1800 psi / 13 GPM @ 2900 psi
Service Winch: 2,000 lbs
Front Winch: M12 12,000 lbs
Pipe Tub: 40 Pipes - 3-1/2"
Safety: Anti-Rotation Top Drive
Maxumum Speed: 3,1 MPH
Weight: approx. 37,400 lbs

Aluminum stairs

Nordic Drill DRC-10-A Crawler Drill Rig For Sale

ID 2557

1982 Built Parallelogram Style Drilling Rig

Worldoils Marketplace

Worldrigs ID: WR2554

2000HP Sling Shot, Bi-directional Skidding, Triple Rig for sale
SCR Drilling Rig for Sale
Sling Shot, Bi-directional Skidding, Triple Rig for Sale

General Description

Sling Shot Bi-directional Skidding Triple Drilling Rig for Sale

ID 2554

Worldoils Marketplace

Worldrigs ID: WR2552

Parallelogram Style Swing Lift, Triple Drilling Rig for Sale
Used Swing Lift, Triple, SCR Type Drilling Rig
3000HP Parallelogram Style Land Drilling Rig for sale

General Description

3000HP Swing Lift Triple Drilling Rig for sale

ID 2552

Worldoils Marketplace

Worldrigs ID: WR2551

Drilling Rig - Mast 143ft - For Sale
Sling Shot, Skidding, Triple Drilling Rig - 2009 Built - For Sale
Parallelogram Style Drilling Rig for Sale

General Description

1600HP Sling Shot, Skidding, Triple Drilling Rig for Sale

ID 2551

Worldoils Marketplace

Simco 2800 HS (HT) Drilling Rig - For Sale

ID 148

Worldoils Marketplace

Portadrill 10TG Drill Rig - For Sale

ID 2555

Featured equipments for sale

Speedstar Quickdrill Drilling Rig For Sale

Worldoils Marketplace

Speedstar Quickdrill Drilling Rig - For Sale

ID 784

Speedstar DSI QuikDrill Drilling Rig for Sale

Worldoils Marketplace

Speedstar DSI QuikDrill Drilling Rig - For Sale

ID 1046

Versa Drill V-1040DP Drilling Rig for Sale

Worldoils Marketplace

Worldrigs ID: WR829

Versa Drill V-1040DP Drilling Rig for Sale
Drilling Rig - 2010 Built - For Sale

Model : V-1040DP Drill Rig
Manufacturer : Versa Drill
Year : 2010
Condition : Used

Description :

2010 Versa Drill V-1040DP Drill Rig
Caterpillar C15 Diesel Engine (Tier III - S/N: JRE11211) - rated
540 HP & 2100 RPM
IR 1070 cfm / 350 psi Air compressor (Clutch)
6500+ Hours on gauge
40,000 lbs of pullback
Hammer Lubricator 7 Gallon
Bean 4 piston bean water injection 25 GPM
Main Winch 18k & Secondary 2k
Pipe rack holds 18 pipe
4 stabilizing Jack
Mounted on a 2010 Peterbilt 367 Truck
Cummins ISX 15 Diesel Engine (Tier III - S/N: 1040039) - rated
565 HP (Heater) with 31,000+ Miles on gauge
Eaton Fuller 13 Speed LL Transmission
Jake Brakes
22,000 lb. front axle, 46,000 lb. rear tandem axles with driver
controlled main locking differentials, total 68,000 GVW
Total Weight 55,520 lbs = Front Axle: 15,620 lbs &
Rear Axle: 39,560 lbs

Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------

Search words (for official use only) :
Used Drilling Rig - Versa Drill V-1040DP - for Sale
2010 Built Versa Drilling Rig for Sale
Used Versa Drill V-1040DP Drilling Rig for Sale
Used Land Drilling Rig for Sale in USA
Versa Used Drilling Rig for Sale in USA
-------------------------------------------------------------------------------------------------------

Versa Drill V-1040DP Drill Rig - for Sale

ID 829

Chicago Pneumatic T650 Drilling Rig for Sale

Worldoils Marketplace

Chicago Pneumatic T650 Drilling Rig - For Sale

ID 2544

Worldoils Marketplace

Diedrich D120 Drilling Rig - For Sale

ID 2684

Worldoils Marketplace

Worldrigs ID: WR2685

Sonic SDC500-29P Drilling Rig for Sale
Used Sonic SDC500-29P Drilling Rig for Sale

Model : SDC500-29P Drill Rig
Manufacturer : Sonic
Condition : Used

Description :

Sonic SDC500-29P Drilling Rig - For Sale

ID 2685

Worldoils Marketplace

Worldrigs ID: WR2686

Mayhew 1000 Drilling Rig for Sale
Drilling Rig - Mayhew 1000 - For Sale

Model : 1000 Drill Rig
Manufacturer : Mayhew
Condition : Used

Description :

Mayhew 1000 Drilling Rig - For Sale

ID 2686

Worldoils Marketplace

Worldrigs ID: WR782

Schramm T64HB Drill Rig For Sale
Drilling Rig - Schramm T64HB for Sale

Model : T64HB Drill Rig - Retrofitted
Manufacturer : Schramm
Year : 1978
Condition : Used

Description :

Schramm T64HB Drill Rig - For Sale

ID 782

Worldoils Marketplace

Sonic SDC500-29P Drilling Rig for Sale

ID 2679

Worldoils Marketplace

Simco 2400 SK-Drilling Rig - For Sale

ID 1130

New UMD 180 Land Drilling Rig - For Sale

Worldoils Marketplace

UMD 180 New Land Drilling Rig - For Sale

ID 597

Gardner Denver 14W Drilling Rig for Sale

Worldoils Marketplace

Gardner Denver 14W Drilling Rig - For Sale

ID 1205

2008 Built Howard Turner HTB3KDD Drilling Rig

Worldoils Marketplace

Howard Turner HTB3KDD Drilling Rig For Sale

ID 2670

Worldoils Marketplace

Gus Pech 900XHR Drilling Rig - For Sale

ID 2667

Davey M8A Table Drive Drilling Rig for Sale

Worldoils Marketplace

Davey M8A Table Drive Drilling Rig for Sale

ID 2662

Davey M8 Table Drive Drilling Rig for Sale

Worldoils Marketplace

Worldrigs ID: WR2661

Davey M8 Table Drive Drilling Rig for Sale
Drilling Rig - Davey M8 Table Drive

Model : M8 Drill Rig
Manufacturer : Davey
Condition : Used

Description :

Davey M8 Table Drive Drilling Rig for Sale

ID 2661

LTO 350 & 550 Cooper Copy Workover Rig for Sale

Worldoils Marketplace

LTO 350 & 550 Cooper Copy Workover Rig - For Sale

ID 2775

800 HP Mechanical Drilling Rig - Trailer Mounted - For Sale

Worldoils Marketplace

Worldrigs ID: WR2774

Wilson 42 - 110 Double Trailer Mounted Rig for Sale
800 HP Mechanical Drilling Rig - Trailer Mounted - For Sale

General Description :

Make : Wilson

Wilson 42 - 110 Double Trailer Mounted Rig - For Sale

ID 2774

PortaDrill TLS Top Head Drilling Rig - For Sale

Worldoils Marketplace

PortaDrill TLS Top Head Drilling Rig - For Sale

ID 2773

2000 HP National 1320 Drilling Rig for Sale

Worldoils Marketplace

National 1320 2000 HP Drilling Rig - For Sale

ID 2772

Drilling Rig - Service King 1000 HP for Sale

Worldoils Marketplace

Worldrigs ID: WR2654

Service King 1000 HP Drilling Rig for Sale
Drilling Rig - Service King 1000 HP for Sale

Description :

Crown, (4) Sheave McKissick, 1 ¼”,
Date : 1/ 2012,
SHL : 450,000#
S/N: DK504, Cluster Model : 744-1, 1 1/8” Line, 36” Sheaves,
Fast Line Model : 741-1, 1 1/8” Line, 42”, 40 Tons,
Sand Line Model : 741-1, 1.12” Line, 30” Sheave, 40 Tons
Dead Line Anchor Model : 741-1, 1 1/8” Line, 30” Sheave

Carrier, (5) Axel / Trailer Mount, Model 1000,
SK#: 395T, Gross Weight:, 177,900 Lbs.,
Date: 3/2012, VIN: 1S90TDD85CL976333, (1) Sand Line Reel
(1) Electric Drive Hydraulic Pump,
(2) Oil Saver Hydraulic Filters

Engine # 1, Detroit 2010 Model, 14.0 Litre,
Allison Transmission, S/N: 06R1049132

Engine # 2, Detroit 2010 Model, 14.0 Litre,
Allison Transmission, S/N: 06R1049335

(1) Hydraulic Tank – 350 Gallons

Drawworks, Model:

46 x 10, S/N: DW 2387, Transmission,

Model: 1000, S/N: 5962350
S/N: 5962688, Power Drive Gear Box: 2.47 x 1,
Dual Actuated Air Band Brake, Hydraulic Drum Brake,
Air Actuated Crown Saver, (2) Hydraulic Cat
Heads – Make Brake, (1) Drillers Console

Mast, Model :

117ft, SHL 450,000#, S/N: DK 504,

(3) Hydraulic Raising Cylinders
Built in Top Drive Torque Track, Kelly Hose, Stand Pipe 5000 PSI
with 5000 PSI Type D MSF Mud Gauge S/N: 41814, (3) 5000 PSI
Oteco Shut Off Vales, (2) 250 Ton Bails – 79” Long,
Finger Board – (22) Fingers, (1) Sentry Block / Hook
Combo Model SI-BH-250, 36” Sheave Size Line 1 ¼”, S/N: 07054,
Date: 2007, (2) Air Hoist Lines, Fully Rigged for Safety Cable,
Number of Raising Cylinders = Number of Extensions

Mud Pits :
(2) Pit System – 950 BBL

Shaker Pit (2) Compartments, (2) Swaco Mongoose Shakers,
S/N: PF 2664, S/N: PF 2663, (1) Mongoose Mud Cleaner with
Desander Model: 2-12, S/N: 21963, S/N: 4500732 / Desilter,
Model: 6T4, S/N: 23043, (1) 5 Star 6 x 5 x 14 Cent Pump p/b
50 HP Electric motor

Suction Pit, Full Set of Pit Lights, (2) Caustic Barrels,
(4) 10 HP Agitators (4) Compartments, (2) Prime Mud Movers –
Mission Magnum 6 x 5 x 14 ea p/b 50 HP elec motors

Water Tank :
500 BBL, (2) 25HP Mission Water Transfer Pumps x 4RS,
(2) Compartment Chemical Pit

Gas Buster, Swaco, Model: 2011, 4ft x 10ft, 6” Outlets,
6” Inlets, S/N: MGS-M-118 Skidded

Choke Manifold, (6) 4 x 5M, MGV – HECI, (1) 2 x 5M, MGV – HECI,
(1) 2 x 5M Manual Choke – HECI, 3 Way Watermelon

Pill Pit, (1) Five Star 6 x 5 x 14 Cent Pump p/b 50HP
elec motor w/(1) Hopper

Mud Pump #1, SLF 1300, Engine: Cat 399B PCTA, Date: 12/23/2011,
S/N: 35B06278 Torque Converter, Oil Works, Model: C-300-100,
Type E, S/N: 1600, Five Star Charge Pump, 6 x 5 x 14 p/b 50HP
Electric Motor –, (1) 5000PSI Pulsation Dampener, (1) 5000PSI
Emergency Pop Off – Odrill, (2) 5000PSI Gate Valve - Oteco
(3) SLF 1300 Modules

(1) Mud Pump Center Skid with Frogs, Miscellaneous Basket,
Rig Mats (Table Mats)

Mud Pump #2, SLF 1300, S/N: KMI 01, Engine: Cat 399 PCTA,
Date: 05/ 2011, S/N: 35B4092, Torque Converter, Oil Works,
Model: C-300-100, Type E, S/N: 1600, Five Star Charge Pump,
6 x 5 x 14 p/b 50HP Electric Motor –, (1) 5000PSI Pulsation
Dampener, (1) 5000PSI Emergency Pop Off – Odrill, (2) 5000PSI
Gate Valve – Oteco (3) SLF 1300 Modules

(1) Top Dog House with Tools, (2) BJ Elevators, (2) Tongs,
(3) Slips, (2) Drill Pipe Slips, (4) Mud Wipers, (4) Sets
of Pit Stairs, Spare Tong Heads, (1) Hydraulic Accumulator
Suit Case

BOPs :
(1) 11” 5M Annular – Hydril GK
(1) 11” 5M Double – Shaffer Style
(1) 11ft 5M Mud Cross with Wing Valves

Top Drive :
Venture Tech 250 T w/ (1) Top Drive Service Loop, (1) Bottom
Half for Top Drive Torque Track, Hydraulic Top Drive House p/b
(2) Detroit 60 Series (14.0 Litre), has “Dan Voss” Hydraulic
Drive Pump System – (2) Pumps ea (4) Outlets ea, (1) Bug Blower

(1) Basket with (6) Crossover Subs

Junk Basket, Floor Hand Rails, Flow Line Skid with hoses,
(2) Oteco Valves, Miscellaneous Flow Line Plumbing,
(1) 4ft x 20ft V Door, (3) Saver Subs, (1) Crossover Sub

Accumulator :
Advanced Pressure Inc., (12) Bottles, 5 Station, 3000PSI System,
S/N: 11871, (2) 55 to 1 Air Pumps, (8) Steel Flex Accumulator
Lines, (1) Pressure Washer Power Swivel, Venture Tech,
Model: XK 250 Ton

Generator House :
Genset # 1, Engine: 12V 2000, Generator: Kohler – 450KW,
Model: Power Systems 600
Genset # 2, Engine: 12V 2000, Generator: Kohler – 450KW,
Model: Power Systems 600
(1) Screw Compressor – Gardner Denver, Electra Saver,
Model: EBE 990, S/N: S334319

Mud Boat – Main Section, 60ft Long x 10ft Wide (4) 12” Beams
Mud Boat – Extension, 17ft 3” Long x 11ft Wide

Substructure, 35ft Long x 11ft Wide

Rotary Table, Sentry – 20.5”, Date: 2007, S/N: 074102

(1) Rotary Angle Gear Box
(1) 40ft Parts House with Divider
(1) Wire Line 15,000 x .092 – Five Star
Consumables

Camp Transformer – 6 Outlets

Location : USA

Service King 1000 HP Drilling Rig - For Sale

ID 2654

Worldoils Marketplace

Worldrigs ID: WR2653

NOV Rapid Drilling Rig for Sale
1500 hp Rapid Drilling Rig for Sale

Description :

Substructure :
NOV - Slingshot type (2 piece)
Clearance : 20ft with 18ft of clearance
Capacity : 500,000# loading
Six well skidding system

Mast :
NOV - Telescoping
Height : 80ft
Capacity : 500,000#
Winch & Gin Pole : 5,000#

Drawworks :
NOV - SSGD 250 (disc brakes)
Rating : 1500- hp
Capacity : 500,000# on eight 1¼” lines.
Motor : Baylor AC

Top Drive :
NOV - TDS 10R
Rating : 250 ton
Torque Capacity :
36,500 ft/lbs intermitting
20,000 ft/lbs @ 98 rpm continuous
9730 ft/lbs @ 182 rpm continuous

Drillers Cabin :
NOV - Purged
Amphion Controls

Pipe Handling :
Iron Roughneck - NOV ST - 80R
Range : 4¼” to 8½”
Torque Capacity :
60,000 ft/lbs make up
80,000 ft/lbs brake out
BX - 450 Elevators (250 ton)
Range : 2 7/8”, 5”,7”, 95/8” & 13 3/8”.
PS - 21 Slips (250 ton)
Range : 2 7/8”, 5”, 7”, 9 5/8” & 13 3/8”.
Erector arm, pipe funnel and pipe rack wings.

Mud System :
Mud Pumps - 2 NOV F-1600
Rated : 1,600 hp.

Discharge manifold & Suction skid

Stand Pipe :

5”, 1002

Mud Pits (covered)
Capacity : 625 bbls
Mixing System & skid
Shale Shakers : 2 Derrick
Trip tank : Two 25 bbl tanks & pumps
Rolling Flow Line System (15ft spacing)

BOP Equipment :
11” X 5m Shaffer Annular (flanged)
11” X 5m Shaffer Double Ram (studded)
11” X 5m Mud Cross (flanged with 3 1/8” outlets)
Re-certified by OEM
Choke Line :
3 1/8” X 5m HCR Valve
3 1/8” 5m Manual valve (replace)
3 1/8 Coflex hose :
Three - 15ft - 3 1/8” flanged choke lines
10ft - 3 1/8” flanged choke line
Four - 3 1/8” studded Tees with one filled blind flange
Kill Line 2” Coflex hose
Two : 3 1/8” X 5m manual valves (replace)
Check Valve :
NOV Hydraulic Handling System
3 1/8” X 5m Choke Manifold (hydraulic & manual chokes)
Gas Buster
Flare Stack & line

Power :
Two 3512C Caterpillar Engines
Rated : 1476 hp @ 1200 rpm
Two Baylor Generators
Rated : 1750 kVa, 600 volts / 60 HZ
NOV VFD & MCC
Bi-fuel System

Drill Pipe :

370 jts - 5” 19.5 #/ft., NC 50

Inspected by Drilco
Critical Capital Spares :
F-1600 Mud Pump
Baylor 1750 kVa Generator (for repair)

Winch – 5,000#

Hydraulic Cylinders :
Substructure Raising (repairing NOV)
Derrick Raising (repairing NOV)
Derrick Scoping (repairing NOV)
BX 450 Elevators
PS 21 Slips

Skid System Description :

Applied Machinery Corporation custom built skidding system.
Capable of 75ft skidding.
Key description :

Rig Skid System :

12” Elevated Skid
Draworks Skid Section
Starter Skid Section (ODS/DS X 43ft)
Standard Skid Section (ODS/DS X 15ft)
Log of Pins, Spreaders, and Claws
AMC Hydraulic Drill Line Spooler
Festoon Track

Hydraulics :
2 Hydraulic Cylinders
10” Bore X 25” Stroke
3,000 psi Working Pressure
Associated Hoses and Fittings

Festoon :
8ft X 35ft X 12” Master Skid
Capable of supporting a 75ft Skid
4” Integrated Track and Roller for Festoon and Grasshopper

Shaker and Flowline Header :
10” “Mona-Flow” line with fittings and jets
Rolling capability to support skids
Trip Tank and mud bucket hoses

Rig Load List

Single Well Pad	Loads	3 Well Pad
Shaker Pit	1	Shaker Pit
Suction Pit	2	Suction Pit
Trip tank & Choke Manifold	3	Trip tank & Choke Manifold
F- 1600 Mud Pump	4	F- 1600 Mud Pump
F- 1600 Mud Pump	5	F- 1600 Mud Pump
Utility Skid	6	Utility Skid
3512 Caterpillar Gen Set	7	3512 Caterpillar Gen Set
3512 Caterpillar Gen Set	8	3512 Caterpillar Gen Set
Air Compressor Skid	9	Air Compressor Skid
VFD	10	VFD
Festoon & Grasshopper	11	Festoon & Grasshopper
Fuel Tank	12	Fuel Tank
Rig Water Tank	13	Rig Water Tank
Drawworks / Koomey	14	Drawworks / Koomey
Substructure	15	Substructure
HPU Skid & Grasshopper	16	HPU Skid & Grasshopper
Drillers Substructure	17	Drillers Substructure
Drillers Cabin	18	Drillers Cabin
Drill Line Spool	19	Drill Line Spool
2 Pipe Wings	20	2 Pipe Wings
2- Pipe Wings &Arm	21	2- Pipe Wings &Arm
Flow line, Pipe Handler, CoFlex	22	Flow line, Pipe Handler, CoFlex
Flare Box & Line	23	Flare Box & Line
2 sets Pipe Racks	24	2 sets Pipe Racks
2 X Hose Baskets	25	2 X Hose Baskets
Drill Pipe: 5" , 19.5 #/ft	26	Drill Pipe: 5" , 19.5 #/ft.
Drill Pipe: 5" , 19.5 #/ft	27	Drill Pipe: 5" , 19.5 #/ft.
Drill Pipe: 5" , 19.5 #/ft	28	Drill Pipe: 5" , 19.5 #/ft.
Pipe Bunks X 4	29	Pipe Bunks X 4
Tool / Nipple House	30	Tool / Nipple House
Hydraulic Shop	31	Hydraulic Shop
Parts House	32	Parts House
BOP in Cradle	33	BOP in Cradle
Stairs & Porches	34	Stairs & Porchesin Cradle
Mats X 5	39	Mats X 5
	44	Flow Line X 2
	48	Skid System X 4

Price & terms : Please enquire using the email form below.

NOV Rapid Drilling Rig for Sale

ID 2653

Worldoils Marketplace

Versa Drill V2000 Drilling Rig - For Sale

ID 80

Worldoils Marketplace

Worldrigs ID: WR562

Speedstar 30K Drilling Rig for Sale
2004 Built Speedstar 30K Drilling Rig for Sale

Model : 30K Drill Rig
Manufacturer : Speedstar
Year : 2004
Condition : Used

Description :

2004 Speedstar 30K drill rig
Sullair 1000 cfm / 350 psi Air Compressor
3,500 Hours +
Hammer Oilier
6 Rod Carousel
Bean 20 GPM Water Injection Pump
Break Out Wrench and Rod Spinner
2 Winches
Mounted on a Peterbilt Truck
CAT C15 diesel engine at 550 HP
Fuller 8 Speed Transmission
97,750 miles
(32) Drill Pipe (20' x 4 1/2" x 2 7/8" IF) Cost Extra

Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

------------------------------------------------------------------------------------------------------------
Search words(for official use only) -
Speedstar 30K Used Drilling Rig for Sale
Used Speedstar 30K Drilling Rig 2004 Built
Speedstar Drilling Rig 2004 Built for Sale
Speedstar 30K Drilling Rig for Sale in USA
Speedstar Land Drilling Rig for Sale in USA
-----------------------------------------------------------------------------------------------------------------

Speedstar 30K Drilling Rig for Sale

ID 562

Worldoils Marketplace

Schramm T660W Drilling Rig - For Sale

ID 549

Worldoils Marketplace

Worldrigs ID: WR463

Drilling Rig T4W For Sale
T4W Drill Rig For Sale

1984 T4W
70,000 pull back
900/350 air
12V71 on deck
3208 cat in carrier
good tires
set-up to run 2 7/8 IF rods
300 ft of rods
more rods avalible
some toolling and extras
serial #14042

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------
Search words(for official use only) -
Drill Rig T4W For Sale
T4W Drilling Rig For Sale
-----------------------------------------------------

Drilling Rig T4W For Sale

ID 463

Worldoils Marketplace

Worldrigs ID: WR502

Taylor C550 Double Drum Workover Rig for Sale
Used Taylor C550 Workover Rig

Drawworks :
2007 Model Taylor C550 Double Drum Workover Rig with 16,000’ of 7/16”
swab line, with 475 HP Cat engines

Mast :
112’ Telescoping, 240,000# Capacity

Carrier :
5 Axle carrier unit

Substructure :
10’ Taylor hydraulic floor with working height of 8 to 12’ and a
substructure ragted at 300,000#

BOP :
11” x 3000# LWS Shaffer 5K double ram and annular

Water Tank :
200 BBL work tank

Handling System :
5K pump Iron

Handling Tools :
BJ tongs for tubing and sucker rode & Kavin Slips

Ancillary Equip :
Complete with pipe racks and cat walk

Office Capacity :
Complete with portable office for service companies, with enough
desk space for four people, I.e. directional personnel

Drilling Components

Mud Pump (Main) :
PZ7 Main 550 HP mud pump with Detroit series 60 enging and 5- speed transmission

Mud Pump (Aux) :
Auxillary mud pump system – with 24 hour programs a 1000 HP
pump complete with one (1) Swaco Mongoose, one (1) Swaco Desander &
one (1) Swaco Hopper with two (2) 300 bbl tanks are available

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------
Search words(for official use only) -
Taylor C550 Double Drum Workover Rig for Sale
Land Rigs For Sale
Used Land Rigs For Sale
Used American Workover Rig
Used Taylor C550 Workover Rig
Workover Used Land Rigs For Sale
---------------------------------------------------------------------------------------------

Taylor C550 Workover Used Rig - for sale

ID 502

Schramm Rotadrill T64HB Drilling Rig for Sale

Worldoils Marketplace

Schramm Rotadrill T64HB Drilling Rig - For Sale

ID 196

Worldoils Marketplace

Ingersoll-Rand T3W Drilling Rig - 2004 Built - For Sale

ID 1033

Ingersoll-Rand ECM 370 Crawler Drilling Rig for Sale

Worldoils Marketplace

Ingersoll-Rand ECM 370 Crawler Drilling Rig - For Sale

ID 1202

Worldoils Marketplace

Worldrigs ID: WR2635

LTI 1000KP Drilling Rig
Drilling Rig - LTI 1000KP 2000Hp - For Sale

Description :

General Description :
Make : Lee C Moore
Estimated Drilling Depth : 20,000ft
Estimated Rig Move Loads : 75
Estimated Camp Move Loads : 20
Rated HP : 2000

Mast :
Height : 147.00ft
Static Hook Load Capacity : 1,000,000lb
Mast Racking Capacity : 20,800ft

Substructure :
Style : Parallelogram
Height : 30.00 ft
Clear Height : 25.25 ft
Casing Capacity : 1,000,000lb
Maximum Setback Load : 600,00lbs

Drawworks :
Make : LeTourneau
Model : LDW 1000k
Power Rating :2000hp

Input Power :

2 ea Oilfield

Electric

Marine Inc
TT 1500
Drilling Line Size : 1½"
Brake Type - Band or Disk : Disk

Top Drive / Power Swivel :
No Top Drive

Swivel :
No Swivel

Rotary Table :

Make :

LeTourneau

LW-375

Table Opening : 37 ½"
Maximum Load Rating : 650 Ton

Power Generation :
No Engines
No Generators
SCR / VFD / DC /DC : VFD Rig

Mud System :

@ 120 spm
Pressure Rating : 7,500 psi
Active Mud Volume : 590 bbls
Reserve Mud Volume : 460bbls

Shale Shakers :

3 ea Axiom

Process Ltd.
Mud Cleaner : N /A
Desander : N /A
Desilter : N /A
Centrifuge : N /A

Well Control :

Controls
8 stations
3,000 psi

Enhancements :

Power Slip Frame :

Access Oil

LTI 1000KP Drilling Rig - 2000Hp - For Sale

ID 2635

Ingersoll-Rand T4BH (Blast Hole) Drill Rig for Sale

Worldoils Marketplace

Worldrigs ID: WR667

Ingersoll-Rand T4BH (Blast Hole) Drill Rig For Sale
Used Ingersoll-Rand T4BH (Blast Hole) Drill Rig

Model : T4BH (Blast Hole) Drill Rig
Manufacturer : Ingersoll-Rand
Year : 1999
Condition : Used

Description :

1999 Ingersoll-Rand T4BH (Blast Hole) Drill Rig
S/N: 7434
Cummins QSK19 Diesel Deck Engine
1050 cfm / 350 psi Air Compressor
Hammer Oiler
Cat Water Injection Pump
37,500 lbs of Pullback
2 Motor Spur Head
4456 hours on meter
5 Rod Carousel
Mounted on a CCC (Crane Carrier Company) Truck
CAT 3306 Diesel Engine
8,741 Miles on gauge

Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------------------------------------
Search words(for official use only) :
Ingersoll-Rand T4BH (Blast Hole) Drill Rig For Sale in USA
1999 Built Ingersoll-Rand T4BH (Blast Hole) Drill Rig For Sale
Used Drilling Rig - Ingersoll-Rand T4BH (Blast Hole) - For Sale
Land Drilling Rig For Sale in USA
Used Ingersoll-Rand T4BH Drilling Rig For Sale
-----------------------------------------------------------------------------------------------------------