Schramm T130 Drill Rig For Sale
Used Schramm T130 Drill Rig for Sale

Model : T130 Drill Rig
Manufacturer : Schramm
Model Year : 2003
Condition : Used

Description

2003 Schramm T130 Drill Rig - S/N: J130-0707
Detroit DDC/MTU V12-2000TA DDEC Diesel Deck Engine
Mast: Telescoping construction permits long head travel 50’' ft
Note: Shorter length in transport position
130,000 lbs of Pullback
Free standing design with 28"” table opening
Sullair 1350 cfm / 350 psi Air Compressor (Rebuilt with low hours)
Hydraulic pumps (low hours since rebuilt)
Top Head: Fixed position - two hydraulic motors. 0-143 RPM with 106,600 in-lb of torque
Pipe handling sling
Set up for RD20 style (4-½”" X 30'’ X 2-7/8" IF) Drill Pipe
Carousel
Cat Water Injection Pump
Graco Hammer Lubricator
Mounted on a CCC (Crane Carrier Company) Truck - VIN#: 1CYDGD5843T046189
CAT diesel engine
425/65R22.5 front tires 12R22.5 rear tires
Sub Base: 9'’ wide 40'’ long and 3’' tall & Basic Tooling Included

Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
--------------------------------------------------------------------------------------------------------------------
Search words(for official use only) -
Schramm T130 Drill Rig For Sale
Schramm Land Drilling Rig For sale
Drilling Rig - Schramm T130 For Sale
Used Schramm T130 Drill Rig for Sale
Schramm T130 Drill Rig For sale
Used Drilling rig for sale in USA
----------------------------------------------------------------------------------------------

750 HP Mechanical Drilling Rig for Sale
Used 750hp Mechanical Drilling Rig
2008 built Mechanical Drilling Rig - Used

1. Introduction

Carrier : Self propelled - six axle carrier rated at 60 tonne
Mast : 120 ft clear height rated to 338,000 lbs with 8 lines
Type Of Rig : Mechanical rig
Year of Manufacturer : 1980
Rig Depth Rating : 3,000 mtrs with 4-1/2” (16.6lbs/ft) drill-pipe

2. Hoisting System

2.1 Drawworks -
Manufacturer : Cooper
Model : LTO 750
Draw-works HP Rating : 750 hp
Drive Motors : CAT 3406-C diesel engines (New Sept 2003)
Transmissions :  Allison Model 5860 CLT torquematic transmissions
Engine HP Rating : 400 hp each
Quantity Motors : Two

2.1.1 Main Drum -
Fast Line Rated Single Line Pull : 50,000 lbs
Drum Sleeve : Lebus International grooved sleeve
Grooved To Suit Drill line : 1-1/8” diameter
Brake Cooling : Brakes cooled by circulating water

2.1.2 Auxiliary Brake -
Manufacture : Parmac
Model : 202 Parmac water brake

2.1.3 Deadline Anchor -
Manufacturer : Martin-Decker
Model : Hercules 118T Deadline anchor
Drill line Wire Rope Size : 1-1/8”
Rated Deadline Load : 40,000lbs

2.1.4 Crown Saver -
Manufacturer : Koomey
Model : Crown-O-Matic (Crown saver only)

2.1.5 Auto Driller -
Manufacture : AOI
Model : TM-551

2.2 Derrick / Mast -
Manufacturer : Pemco Equipment Company
Model : 120-350-C
API Capacity : 350,000 lbs
Height : 120 ft (under the crown to the ground)
Rated Static Hook Load : 338,000 lbs with 8 lines
Racking Capacity : 145 stands of 4-1/2” DP & 12 stands of DC
Maximum wind speed : 65 miles per hour
Number Of Sheaves In Crown Section : 5 only
Maximum Number of Lines : 8 lines
Guying Arrangement : Internally guyed

2.2.1 Make-up Cathead -
Type : Hydraulic cylinder
Location : Mounted in the back of the derrick
Maximum Make-up Torque : 30,000ft / lbs (single line pull)

2.2.2 Bereak-out Cathead -
Type : Hydraulic cylinder
Location : Mounted in the back of the derrick
Maximum Break-out Torque : 40,000ft / lbs (single line pull)

2.3 Substructure -
Manufacturer : Derrick Services Incorporated
Model : DS11 17 - 650
Height to the top of the Rotary Table : 17 ft high
Weight : 48,700 lbs (excluding Rotary table)
Setback area carrying capacity : 3,000 mtrs
Setback Capacity : 300,000 lbs
Rotary Beams : 350,000 lbs
Rotary table beams to ground level : 14ft clearance under Rotary beams

2.3.1. Sub Base Raising Winches : Not applicable

2.4 Drilling Line -
Manufacturer : Union
Rope Diameter : 1-1/8"
Length Per Reel : 3,500 ft
Construction : 6 x 19 EIPS
Breaking strength single pull : 130,000 lbs (578 kN) straight pull

2.5 Travelling Block -
Manufacturer : National
Model : 435-G-175
API working load capacity : 385,000 lbs
Number Of Sheaves : 4
Size Of Sheaves : 36” diameter
Sheaves Grooved To Suit : 1-1/8” drill line
Quantity : One

Elevator Links -
Manufacture : Varco
Size : 2-1/4” diameter x 108” long
Load Capacity : 250 tonne
Quantity : One set (2 per set)

2.7 Hydraulic Service Winch No.1 -
Manufacturer : Braden
Model : PD12
Rated Line Pull > 1st Layer : 12,000 lbs
Quantity : One

2.7.1 Hydraulic Service Winch No.2 -
Manufacturer : Ramsey
Model : J- 10A
Rated Line Pull > 1st Layer : 3,750 lbs
Quantity : One

2.7.2 Man-Rider Winch
Manufacturer : Ingersoll – Rand
Model : LS150RLP-L-B-E
Capacity : 150 kg Max Lift
Brake : 2 Independent, Auto Brake (Band and disc brake)
Safety Features :
Overload Protection
Upper and Lower Limit Switch with Emerg.-stop
Shack line detector & drum protection
Quantity :  One

2.8 Casing Stabbing Board -
Manufacturer : Engineered stabbing board
Type : Adjustable height using endless chain
Work platform :
Travelling Dolly has large pins that are manually
engaged @ the correct working height
Safety:
Quantity : One

3. Circulating Equipment

Mud tanks designed for 13 PPG mud. All surface equipment
rated to 5,000 psi working psi

3.1 Mud tanks -
Total active capacity : 500 barrels
Total Pre-Hydration Capacity : 190 barrels

3.1.1 Tank No.1 (suction tank) -
Total capacity : 360 barrels
Pill Tank : 50 barrels
Pre-Mix Tank : 140 barrels
Suction Tank : 140 barrels

3.1.2 Tank No.2 (shaker tank) -
Total Capacity : 360 barrels
Intermediate Tank : 230 barrels
Desilter Tank : 50 barrels
Desander Tank : 50 barrels
Sand Trap : 30 barrels

3.1.3 Trip Tank -
Trip total capacity : 40 barrels
Pump unit :
1-1/8” - 2 x 3 centrifugal pump
Three phase – 60Hz, 20 hp running @ 1750 rpm

3.2 Mud Pumps No.1 and No.2
Manufacture : National
Model : 8-P-80
Max Input : 800 hp @ 160 SPM
Input Drive : Belt driven
Max Pressure :
4395 psi with 4-1/2” Liners (on request at client’s cost)
3560 psi with 5” Liners (on request at client’s cost)

4 Rotating Equipment

4.1 Top Drive (Rental option)
Manufacture : Tesco
Model : 475 HP, 250 ton, HMIS
Rated Capacity : 250 ton
Maximum Torque : 23,500 ft - lbs
Maximum Speed : 170 rpm
Power Unit : HPU
Optional Extras : N/A

4.2 Swivel -
Manufacturer : National
Model : P-200
Working Load Rating : 440,000 lbs
Load Bearing Rating @ 100 rpm : 297,000 lbs
Working pressure limit : 5,000 psi
Quantity : One

4.3 Kelly -
Manufacturer : Omsco
Size : 5-1/4"
Shape : Hexagonal
Overall Length : 40 ft
Working Length : 38 ft
Connection, Box : 6-5/8” Reg LH
Connection, Pin : 4” IF (NC 46)
Quantity : One

4.4 Kelly Drive Bushing -
Manufacturer : Varco
Model : 27 HDP
Type : Pin drive
Rollers : To suit 5-1/4” Hex Kelly
Quantity : One

4.5 Rotary Table -
Manufacturer : Ideco
Model : SR-23-E
Opening : 23”
Drive : Chain driven with power from Drawworks engines
Static Capacity : 1,000,000 lbs
Rotating Load : 661,000 lbs
Max. speed : 200 rpm (no load, reduces as load increases)
API Bowls : Bowl No.’s 1 & 2
Quantity : One

4.6 Kelly Spinner -
Manufacturer : Gill
Model : Type 100
Power Unit : Pneumatically powered
Quantity : One

5 Well Control Equipment

5.1 Blowout Preventers Annular -
Manufacturer : Hydril
Model : GK
Connection : Studded on the top and flanged on the bottom
Size : 13-5/8”
Work Pressure : 5,000 psi
Quantity : One

5.2 BOP Handling System -
Troller handling system :
Engineered and certified BOP handling system
Lifted using the travelling blocks and wire ropes

5.3 Drilling Spools and Adaptors -
Drilling Spool :
Quantity : 1
Description :
Flanged spool 24” high
13-5/8” 5,000 psi x 13-5/8” 5,000 psi complete with
One 2” x 5,000 psi side outlet & One 3” x 5,000psi
side outlet

5.4 Accumulator -
Manufacturer : Koomey
Model : 108-10S, type 80
Bottles : 12 x 10 gallon, bottom loading
Manifold Quantity : 4 banks
Reservoir Capacity : 280 Gallons

Functions : 4 x 1” selectors plus 1 x 1“ spare selector
Triplex Pump : 1 unit, 3/4” Plungers
Air Pumps : 2 units, 8.1/2” air end x 60:1 ratio

Working Pressure :
3,000 psi
a) Low accumulator pressure
b) Low fluid level
c) Low air pressure

Audible Safety Alarms For : Remote Koomey control station on the rig floor
Drillers Control : Operates annular, pipe & blind rams & HCR

6. Instrumentation

- Advanced Driller Monitoring System (ADMS) with I.S. Barrier Box
- System to monitor record and display the following signals in analogue
and digital format :
• 4 Individual Pit Level Indicators
• Total Pit Volume Summaries
• Loss / Gain
• 2 Individual Stroke Per Minute Indicators
• Total Strokes Indicator
• 2 Individual Fill Stroke Indicators
• Total Fill Stroke Indicator
• Individual Trip Tank Indicator
• % Return Flow Indicator
• Flow In Indicator
• Cumulative Flow In Indicator
• Stand Pipe Pressure Indicator
• Hook Load Indicator
• Weight On Bit Indicator
• Depth / Rop / Bit Depth / Block & Hook Position
• Rotary Rpm / Torque Indicators
• Slip In & Slip Out Indication
• Pipe Tally
• Messaging Between all Users
• Time Since Last Foot Drilled

Note :
All monitored parameters and derived signals will have the ability
to set high and low alarms.

7. Accomodation

7.1 Rig site mini-camp :
One only office / communication shack (for MB Century personnel only)
• 40ft long x 10ft wide x 10ft high.
• 2 air conditioner units.
• Work stations for all 3 trades-man, STAO & Rig manager.

Note : Mini camp is for 4 personnel

7.1.2 One only smoko shack as outline below :
• 20ft long x 10ft wide x 10ft high.
• 1 flush toilet.
• 1 small fridge.
• 1 microwave.
• 1 air conditioner.
• 1000Ltr water tank with pump.

7.1.3 One only Rig manager / Company-man sleeper shack as follows :
• 40ft long x 10ft wide x 10ft high.
• 2 bedrooms. (1 each end)
• 1 air condition per room.
• 1 shared bathroom in the middle of the shack.

7.1.4 One only small Airman Generator to run the above buildings
only plus any other MB Century buildings as required.

7.1.5 One only 5,000Ltr water tank to supply water to the above 3 buildings.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

Ingersoll-Rand RD20 II Used Drill Rig for Sale
1993 Built Ingersoll-Rand RD20 II Drill Rig

Model : RD20 II Drill Rig
Manufacturer : Ingersoll-Rand
Year : 1993
Condition : Used

Description

1993 Ingersoll-Rand RD20 Range II Drill Rig - S/N: 3987
Cummins KTA19 Diesel Deck Deck Engine @ 600 HP
7 Rod Carusel
Cat 2520 water injection pump
Hammer Lubricator
Hydraulic Leveling Jacks
Mounted on a 1993 Central Manufacturing Truck with 4 axles
Cummins L10 Diesel Engine
VIN number: PGV84002
Note: No Air Compressor on board as of now (was a IR 1050/350)

Location : USA
 
Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------------------------
Search words(for official use only) :
Ingersoll-Rand RD20 Range II Drill Rig for Sale
Used Ingersoll-Rand RD20 Range II Drill Rig for Sale
Ingersoll-Rand RD20 Range II Drill Rig in USA
Ingersoll-Rand Used Drilling Rig for Sale
1993 Built Ingersoll-Rand RD20 Range II Drill Rig
-------------------------------------------------------------------------------------------------------------

Driltech D40K Crawler Drill Rig For Sale
Used Driltech D40K Crawler Drill Rig For Sale

Model : D40K Crawler Drill Rig
Manufacturer : Driltech
Year : 1980
Condition : Used

Description :

1980 Driltech D40K Crawler Drill Rig
1050 CFM / 350 PSI Air Compressor
Caterpillar 3408T Diesel Engine
Single 5"x25'x5 rod carousel
Bean 2cyl water injection pump
Sound machine, good under carriage, strong Cat motor
Compressor motor upgraded early 2000's was a backup drill

Location : USA

Price & terms : Please enquire using the email form below.       

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------------------------------------
Search words
Driltech D40K Crawler Drill Rig For Sale in USA
1980 Built Driltech D40K Crawler Drill Rig For Sale
Driltech D40K Crawler Drill Rig For Sale
Used Driltech Drilling Rig 1980 Built
Driltech Drilling Rig For Sale in USA
----------------------------------------------------------------------------------------------

D Power Supply
1 VFD System :
Four Bay c/w switchgear, instrumentation,
transformers to control generators and AC and DC motors - 1set
4x 1400 type generator sets control cabinate
5 X VFD control cabinate Siemens (4 active+ 1standby)
PLC Logic control
MCC control 1 set
Protect Device 1set
Air Condition 1set
Top drive TDS 11SA Power supply
Control Panel : To control all electrical equipment - 1set
cable : all communication cable and power cable 1set
Diesel Engines : Turbocharged & After-cooled, rated 1040kw
Continuous, 1600KVA - 4 - CAT3512B
Generators : 1900 KVA, 600V, 60 Hz, 3 phase 4 SR4B
Note: All engines to be provided with automatic
shutdowns and flame arrestors

2 Auxiliary Gensets : 400KW, 400V, 60Hz, 3Phase 1 Volvo

3 Camp : Specs

E Circulating System
1 Mud pumps : F-1600 - 2 - Qingzhou/Baoji
Capacity : 1600 HP, 7 x 10", 690 GPM @ 3000 psi
Motors : 1088 HP AC Traction Motors c/w blowers - 4 - Yongji YG
Complete with : Pulsation Dampers , 5,000 psi
Vibration Damper, 4" x 12', 5,000 psi
SPM Meter, 0 - 2000 SPM
Pressure and Suction Manifold
Discharge Line, 4" # 5,000 psi
Pump Stroke Counter
Suction Line, 10" - 12" including expansion joint
Vibration Hose(s)
Liner and Piston Sets : 6 1/2", 6", 5 1/2"
The skid base
Centrifugal Charging Pump, 5" x 6", 40 HP Expl.
Proof Motor - 2
Belt Assembly - 4
Stand Pipe : 4" x 5000 psi complete with 4" x 62' and 4" x 68' Kelly
Hose with 5000 psi hammer unions, Double stand
pipe, Double H.P manifold on ground - 1 Set

Land Workover Rigs
Land Drilling Rigs
Land Oil Drilling Rigs

For more details on the Used land Rigs for sale, please visit :

 Gardner Denver 2000 hp SCR +/- 25,000' Land Rig

 OIME 2000E 2000 hp +/- 25,000' SCR Land Rig

 Gardner Denver 500 +/- 10,000' Rig (600 hp)

 Spencer Harris 7000 10,000’ Mechanical rig (8000')

 Spencer Harris 7000 10,000’ Mechanical rig

 BDW 800 12,000 feet Mechanical Drilling Rig

 BDW 800 12,000 feet Mechanical Drilling Rig

 National 110-M 1500 hp Mechanical Drilling Rig

 Cabot 750 +/- 10,000' Trailer Mounted Mechanical Rig

 Crown Duke CE 750 11,500' Trailer Mounted Mechanical Rig

 National 80UE 1000hp SCR rig

 Gardner Denver 1000 hp SCR Drilling Rig

ZJ70 AC Drive +/- 20,000' Drilling Rig

Ingersoll Rand RD20 Long Tower Drilling rig

Wilson Mogul 42 Double Drilling Rig

BOMCO 2000 HP Drilling Rig (60HZ) - ZJ70DB

National 110UE

1000HP Mechanical Skid Mounted Drilling Rig

National 1320 2000hp SCR Drilling Rig

Wilson 65 9000ft Mechanical Drilling Rig

Gardner Denver 500 11000ft Rig

Continental Emsco GB 350T Drilling Rig

RT - 400B 12,000 feet Drilling Rig 

National 370 +/- 10,000' Drilling Rig (800 hp)

EMSCO GB 500 +/- 12,000' Drilling Rig (1200hp)

Brewster N45 +/- 8,500' Drilling Rig (900hp)

TSM 850 +/- 12,000' Mechanical Drilling Rig (850 hp)

Wilson 75 +/- 11,000' Drilling Rig (1000 hp)

Ideco U-15 Mechanical Drilling Rig

Superior 700 +/- 10,000’ Drilling Rig (800 hp)

Shramm T130XD Drilling Rig

 Gardner Denver S1000 Mechanical Drilling Rig (1000hp)

OIME 3000 HP SCR +/- 30,000' Drilling Rig  

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------
Search Words (for official use only) :
Land Oil Drilling Rigs For Sale
Land Oil Drilling Rigs
Land Gas Drilling Rigs
Land Drilling Rigs For Sale
Land Gas Drilling Rigs For Sale
Land Drilling Rigs
-------------------------------------------------------------------------------------

OIME SL7 HELI-RIG for Sale
1000HP Helicopter Land Rig
Mechanical Helicopter Land Rig For Sale

We can build Helicopter Rigs of various sizes and types.
Please contact us on rigs@worldoils.com or call +65 ...

Example of a 1000HP Helicopter Rig is displayed here.
All details and load information available on request

Description:
1000 HP, 4800# to 7200# Lift Loads +/-12,000' Drilling Rig
Country: USA

Mast           
Lee C. Moore 131’FT X 510,000# Capacity SHL, Racking Board,              
Boom Line, Tong Weights, Six (6) 42” Sheave Crown Cluster w/ 56”
Fast Line Sheave, 1 1/8” Grooved, Crown Safety Platform, (New) Water   
Table Derrick Shoes,Derrick Lights. New Derrick Sections
(CAT 4 API 4F inspection)

Sub Base     
Seventeen (17’) Foot High Low Lift Substructure, Rated 450,000#   
Setback Capacity, V-Door, Three (3) Sets of Stairs, Handrails,
Substructure, Skid Runners 4’ Wide X 5’High X 60’Long
(Cat 4 API 4F Inspection)                                  
                        
Drawworks
OIME SL 7 Drawworks, Rated 1000 HP, 1 1/8” Lebus Grooved, 
342A  Hydromatic Brake, Driller’s Console(New), Hydraulic
Catheads (New), Four (4) Engine Compound (Remanufactured)
Powered by Four (4) Cat, C15, 540 Hp Ea. Diesel Engines(New)
Twin Disc Transmissions (Rebuilt), Four (4) Engine Skid Boxes(New)     
 
Block/Hook 
Continental Emsco Five (5) Sheave 1 1/8” Line Grooved, 250 Ton Block 
 w/ Web Wilson 250 Ton Hydra Hook (Rebuilt)

Swivel
Gray B44, 300 Ton Swivel (Rebuilt)

Rotary
Ideco Type E, 23” X 53 ¼” w/ Split Master Bushing, Sprocket 26T with 
 2” Pitch (Rebuilt)

Dog House
Top House 8’Wide X 9’High X 10’ Long with 4’ Porch, Total
Length 14’ Knowledge Box, Two (2) Lockers (New)

Bottom House
Bottom House 8’ Wide X 9’High X 10’ Long with 4’ Porch, Total
Length 14’ (New)

Pumps
Two (2) OIME H700, 6” X 10”, Heli-Triplex Pumps /w Mattco Pulsation
Dampener 5000#, Pop Off, Pressure Gauge, Ten (10”) Inch Pump Suction
Skidded, Powered by Compound Engines (Rebuilt)

Note : Additional new OIME H700 pumps & parts are available if needed.

Mud Pits     
SEVEN  Fly Pits 7’7” Wide X 8’High X 9’6” Long, Detachable, Mounted
On Two (2) 49’ Skid, 800 Barrel Capacity, Mud Troughs, Four (4)
Brandt Agitators 10 HP @1175 RPM, 240V, O’Drill/MCM Linear Shale
Shaker, Sixteen (16) 4” Cone Desilter, Desander, Four (4) 4” X 5”
Centrifical Pumps, High & Low Pressure Piping (New Tanks)
Rebuilt mud equipment. New linear shaker new 6 x5 centrifugal MCM
pumps with motors

Generators 
Two (2) Cat 3406, C15, Diesel Engine w/ Cat SR4 350 KW Generators,
Factory Control Panel, Individual Skids 7’6” Wide X 20’ Long
With Detachable Roofs.  Air Compressor (New)

Diesel Tanks          
Three (3) 6’ Dia. X 20’ Long, 4,000 Gallons Heli-Lift Fuel Tanks
Removable Skids (New)
    
Water          
Three (3) 8’5” Dia. X 8’ Long, 360 BBL Ea. Heli-Lift Water Tanks
TANKS (New)

BOP                 
One (1) Hydril GK 13 5/8”Annular, 3000# (Certified & Rebuilt)
Two (2) Schaffer 13 5/8”, Single Ram, 5000#, w/ Two (2) 4” Outlets
(Certified & Rebuilt)

Closing Unit    
OCO, Five (5) Station, 120 Gallon, Two (2) Air Pumps, One (1) Triplex
Hydraulic Charging Pump (New)
 
Miscellaneous
Catwalk 18”High X 4’ Wide X 50’Long, Two Sections 25’
Each (New)
Three Sets of Triangular Pipe Racks 18” High X 28’Long (New)
Five (5) Storage Boxes, Detachable, Mounted on 35’Long Skid

Bails 108”Long X 2 3/4” Dia. (Inspected)
Mud Hopper 4”
Tongs, BJ, Type DB with Tong Heads 3 ½” to 10 ¾” (Rebuild)
Drill Pipe Slips 4 ½” (New)
Drill Collar Slips 4 ½” to 8” (New)
Elevators 4 ½” (Rebuild)

Air Hoist 9/16” Steel Line
Handling Subs
Junk Box
Spool Wire Line 1 1/8”, 4000’ (New)
Extra Spare Parts
Martin Decker Weight Indicater. Tong Torque (Rebuild)

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.




--------------------------------------------------------------------
Search words(for official use only) -  
OIME SL7 HELI-RIG for Sale
American Heli rig for sale
Mechanical Helicopter Land Rigs For Sale
Heli Rigs For Sale
Heli Rig in USA
1000 HP Helicopter Rig For Sale
U.S. Heli Rigs For Sale
OIME SL7 Mechanical Heli Drilling Rig
New Helicopter Rig For Sale
---------------------------------------------------------------------