Doosan XHP750 Air Compressor & Duramast Drill Rig Package XHP750 Air Compressor & Duramast Drill Rig Package for Sale
Model : XHP750 Air Compressor & Duramast Drill Rig Package Manufacturer : Doosan Condition : Used
Description :
Package : Duramast Skid Steer Mounted Drill Rig Hydraulic Rotary Top Head Powered by Skid Steer 300 Ft. Of 2-3/8 Mayhew Regular Thread Drill Rods Towable Rod Trailer Included (Capable of Drilling 400 Deep with A 5-6" Hammer) Breakout Wrench Winch and Rod Lifting Cable 2010 Bobcat T320 Track Loader Skid Steer S/N: A7MP63786 Remote Control 4,653.5 Hours Showing on Meter 2008 Doosan/Ingersoll-Rand XHP750Cat / 300 Psi Air Compressor S/N: 3995T2UCSC44 Caterpillar C9 Diesel Engine S/N: JSC05489 & Arrangement #244-6783 4,176.1 Hours Showing on Meter Towable with Pintle Style Hitch
Location : USA
Price & terms : Please enquire using the email form below.
If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you.
We can arrange delivery of equipment and towage of rigs and vessels where needed.
The details mentioned above are believed to be accurate but are not guaranteed.
--------------------------------------------------------------------------------------------- Search words (for official use only) : Used XHP750 Air Compressor & Duramast Drill Rig Package for Sale Air Compressor & Duramast Drill Rig Package for Sale XHP750 Air Compressor & Duramast Used Drill Rig Package for Sale Doosan Air Compressor & Duramast Drill Rig Package for Sale XHP750 Air Compressor & Duramast Drill Rig Package for Sale in USA ----------------------------------------------------------------------------------------------
Ingersoll-Rand T3W Drilling Rig for Sale 1990 Built Ingersoll-Rand T3W Drilling Rig for Sale Model : T3W Drill Rig Manufacturer : Ingersoll-Rand Year : 1990 Condition : Used Description : 1990 Ingersoll-Rand T3W Drill Rig Powered by a Cummins NTA 855 diesel deck engine (0 Hours Since Rebuilt) IR HR2 825 cfm / 350 psi Air Compressor Table is Rebuilt New Gears & Bearings in Transfer Case/Gear Box Many New Hydraulic Hoses 7-Rod Carousel Set Up for 4-1/2" X 20ft Rods (No Rods Included) Repacked Table Slide Cylinder 4-Cylinder Bean Water Injection Pump Hammer Oiler Mounted on a 1990 Ford L9000 Truck Cummins L10 Diesel Engine Eaton Fuller RoadRanger transmission 167,176 Miles Showing on Meter Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. --------------------------------------------------------------------------------------------------------------------- Search words (for official use only) : Ingersoll-Rand T3W Drilling Rig - 1990 Built - For Sale Drilling Rig - Ingersoll-Rand T3W for Sale Used Ingersoll-Rand T3W Drilling Rig for Sale Ingersoll-Rand T3W Used Land Drilling Rig for Sale Ingersoll-Rand T3W Drilling Rig for Sale in USA ------------------------------------------------------------------------------------------------------------------
Gus Pech R-15 Brat-A-Sonic Drilling Rig for Sale Drilling Rig - Gus Pech R-15 Brat-A-Sonic - For Sale
Model : R-15 Brat-A-Sonic Drill Rig Manufacturer : Gus Pech Year : 2006 Condition : Used
2006 Gus Pech R-15 Brat-A-Sonic Drill Rig Mileage – 11,956 Hours – 11,830 Serial# 105GP133WDC24CXY506 GP# 24-400RS Note : 8' x 8' ft deck that folds down when running the rig. Rod holder on the side of the rig that holds 20' ft rods or casing Mounted on a 2006 M2 Freightliner 6x4 Truck Diesel Engine : MBE4000-450 12.8L rated 450hp - SN: 460.933U0837213 Transmission : Eaton 16 speed manual with Chelsea HD PTO Front and rear ABS air brake system 20,000# Front Axle, 46,000# 2 stage Tuftrac rear axle with Pusher axle @ 13,200# capacity Note : All the Gus Pech specifications and detailed descriptions are viewable in the pictures on the spec sheets. Note : The demand for sonic drilling in the industry to drill mostly environmental projects ranging from deep borings (300’ – 600’) with discreet water sampling, installation of CMT wells, monitoring wells ranging from 2” – 6” at depths reaching 500’ ft. The rig is also capable and has been used on projects where 30 – 45 - degree angle wells were installed. Tooling & Sonic Heads available (cost extra) : About 450’ of 10-3/4” x 10’ H90 Sonic Casing (270’ ft never used), several H90 drive heads for 5-7/8”, 7-5/8”, 8-5/8”, 9-5/8” and 10-3/4” casing sizes. Overshots and taps for all sizes, core bits, casing shoes and some core barrels. We can sell this lot separately or include it in a package deal. We can offer 3 complete Dietrich sonic heads and parts and pieces to assemble maybe 2 more sonic heads (each head cost extra).
--------------------------------------------------------------------------------------------------------- Search words (for official use only) : 2006 Built Gus Pech R-15 Brat-A-Sonic Drilling Rig for Sale Gus Pech R-15 Brat-A-Sonic Drilling Rig - 2006 Built for Sale Used Gus Pech R-15 Brat-A-Sonic Drilling Rig for Sale Gus Pech R-15 Brat-A-Sonic Used Drilling Rig for Sale Gus Pech R-15 Brat-A-Sonic Drilling Rig for Sale in USA -------------------------------------------------------------------------------------------------------
Soilmec SM 401 Rock Drill for Sale Used Soilmec SM 401 Rock Drill for Sale
Model : SM 401 Rock Drill Manufacturer : Soilmec Condition : Used
Soilmec SM 401 Rock Drill Variable Speed Rotary Head Rollstar Rotary Head Gear Box Rotop Hydraulic Top Hammer Double Head Cummins QSB 5.9-30-T Tier II Diesel Engine
--------------------------------------------------------------------------------------------------------- Search words (for official use only) : Rock Drill - Soilmec SM 401 - For Sale SM 401 Rock Drill for Sale Soilmec Rock Drill for Sale Soilmec Used SM 401 Rock Drill for Sale Soilmec SM 401 Rock Drill for Sale in USA -------------------------------------------------------------------------------------------------------
Driltech T25K2W Drilling Rig for Sale Drilling Rig - Driltech T25K2W - For Sale Model : T25K2W Drill Rig Manufacturer : Driltech Year : 1990 Condition : Used Description : 1990 Driltech T25K2W Drill Rig GHH 900 cfm / 350 psi Air Compressor CAT 3406 Diesel Deck Engine (Rebuilt in 2018) 4 Piston Water Injection Pump Includes basic tooling Includes 800ft 4-1/2” X 20ft X 3-1/2 API REG Thread New Feed Chains around 2017 Mounted on a Ford L8000 Truck Ford 7.8 Diesel Engine Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. --------------------------------------------------------------------------------------------------------- Search words (for official use only) : Driltech T25K2W Drilling Rig - 1990 Built for Sale 1990 Built Driltech T25K2W Drilling Rig for Sale Used Driltech T25K2W Drilling Rig for Sale Drilltec Drilling Rig for Sale Driltech T25K2W Drilling Rig for Sale in USA -------------------------------------------------------------------------------------------------------
Klemm 702-2 Micropile Crawler Drill for Sale 2009 Built Micropile Crawler Drill for Sale
Model : 702-2 Micropile Crawler Drill Manufacturer : Klemm Year : 2009 Condition : Used
2009 Klemm 702-2 Micropile Crawler Drill Limited access micropile drill This is a very nice compact drill capable of installing high-capacity micropiles in very limited access settings The Unit starts and runs, all functions working Has a detachable power pack Deutz TCD 2012 L04 2V 4 Cylinder 127 hp 4.038 L Diesel Engine 2370 mm Mast Can work in very low headroom areas while still delivering power enough to go 100’ ft+ in depth with up to 9″ piles Power pack is umbilical, so drill can work inside, while the power is supplied out away from the operation This machine also has a water Injection System, and 8 in Double Grouser Tracks Meter reads : 6,502+ Hours
--------------------------------------------------------------------------------------------------------- Search words (for official use only) : Used Klemm 702-2 Micropile Crawler Drill for Sale Klemm 702-2 Micropile Crawler Drill - 2009 Built for Sale 702-2 Micropile Crawler Drill for Sale Klemm 702-2 Micropile Crawler Used Drill for Sale Klemm 702-2 Micropile Crawler Drill for Sale in USA -------------------------------------------------------------------------------------------------------
Chicago Pneumatic T-700WH Deep Hole Drill Rig & Package Drilling Rig - Chicago Pneumatic - 1981 Built for Sale Model : T-700WH Deep Hole Drill Rig & Package Manufacturer : Chicago Pneumatic Year : 1981 Condition : Used Description : 1981 Chicago Pneumatic T-700WH Deep Hole Drill Rig & Package 900/350 on-board air, mounted on a tandem axle steer Kenworth carrier -75,000# pull-back, 4-rod carousel, CAT 3406B deck engine recently replaced (less than 500 hours ago), rebuilt dual top-head motors and planetaries, rebuilt rotational pump and fan motor/pump, new Nylotron head guides, new winch line Additional equipment included : 3,200ft 4 1/2" x 30ft drill pipe with tandem axle drill pipe trailer mounted IR tugger winch, skid mounted Sullair 900/350 air compressor, skid mounted 2000 gallon fuel tank, skid mounted 300 bbl water tank, skid mounted doghouse, spare CAT 3406B engine (needs rebuilt), 6" hammer, 12" hammer/stabilizer combo, 12" tri-cone stabilizer, casing lifters for both threaded and plain-end, casing slips, break out wrench, J-wrench. Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. --------------------------------------------------------------------------------------------------------------------------------- Search words (for official use only) : 1981 Built Chicago Pneumatic T-700WH Deep Hole Drilling Rig for Sale Used Chicago-Pneumatic Drilling Rig for Sale Used Chicago Pneumatic T-700WH Deep Hole Drill Rig & Package Chicago Pneumatic T-700WH Deep Hole Drilling Rig for Sale in USA Chicago-Pneumatic Drilling Rig for Sale in USA --------------------------------------------------------------------------------------------------------------------------
Driltech D40K Drilling Rig for Sale 1977 Built Driltech D40K Drilling Rig for Sale Model : D40K Drill Rig Manufacturer : Driltech Year : 1977 Condition : Used Description : 1977 Driltech D40K Drill Rig Sullair 750 cfm / 350 psi Air Compressor (unknown hours) CAT 3406B Diesel Deck Engine - rated 400 HP (Rebuilt 600 hours since) Dual Carousels Includes 300ft of 4.5" X 25ft Drill Pipe and Tooling Mounted on a CCC (Crane Carrier Company) Truck Cummins NTC 350 Diesel Engine Note: New White color paint job completed in July 2024 Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. --------------------------------------------------------------------------------------------------------------------------- Search words (for official use only) : Drilling Rig - Driltech D40K - For Sale Used Driltech D40K Drilling Rig for Sale Driltech D40K Drilling Rig - 1977 Built for Sale Driltech D40K Used Land Drilling Rig for Sale Driltech D40K Drilling Rig for Sale in USA ------------------------------------------------------------------------------------------------------------------------
CME 55 Drilling Rig for Sale Used CME 55 Drilling Rig for Sale Model : 55 Drill Rig Manufacturer : CME Drill Condition : Used Description : CME 55 Drill Rig 3 winches 6 Cylinder Ford gas engine on deck 6-ton boom for lifting augers 3 leveling jacks Toolboxes on side All new cables and new bushings up top Mounted on a 1980 Ford Louisville truck Caterpillar diesel engine Tooling Included: Qty. 2 – SPT Hammers Qty. 2 – Split Spoons Qty. 6 – New 8” OD / 4” ID Hollow Stem Augers (5 ft. lengths), with drive cap. Qty. 12 – 12” OD / 43” ID Hollow Stem Augers (5 ft. lengths), with 3 bits and drive cap. Qty. 8 – 6” OD / 3” ID Hollow Stem Augers (5 ft. lengths), with drive cap. Qty. 21 – 6” solid augers, 5 ft. lengths. Qty. 5 – 1-3/4” drill rods, 10 ft. lengths. Qty. 9 – 1-3/4” drill rods, 5 ft. lengths. Qty. 1 – 3-1/3” bit Qty. 1 – 4” bit Location : North America (Canada) Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. --------------------------------------------------------------------------------------------------------- Search words (for official use only) : CME 55 Used Drilling Rig for Sale Drilling Rig - CME 55 - For Sale CME Drilling Rig for Sale CME 55 Land Drilling Rig for Sale CME Used Drilling Rig for Sale in North America -------------------------------------------------------------------------------------------------------
Schramm T64HB Drilling Rig for Sale Schramm Used Drilling Rig For Sale Model : T64HB Drill Rig Manufacturer : Schramm Condition : Used
Schramm T64HB Drill Rig - S/N: T64HB-479 425 cfm / 250 psi air compressor Detroit 8V71N Diesel Deck Engine Two piston Bean water injection pump 2022 rebuilt top head with Western mud swivel 260 ft of 4-1/2" drill pipe (20ft x 4-1/2") Two used 6" DTH Hammers Pipe Rack Mounted on a 1989 International Truck DT466 Diesel Engine with 8LL speed transmission and power divider Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. --------------------------------------------------------------------------------------------------------- Search words (for official use only) : Drilling Rig - Schramm T64HB - For Sale Schramm T64HB Used Drilling Rig For Sale Schramm Drilling Rig for Sale Schramm T64HB Drilling Rig for Sale in USA Schramm Used Land Drilling Rig For Sale in USA -------------------------------------------------------------------------------------------------------
Reichdrill T690 Drilling Rig for Sale Drilling Rig - Reichdrill T690 - For Sale Model : T690 Drill Rig Manufacturer : Reichdrill Year : 1998 Condition : Used Description : 1998 Reichdrill T690 Drill Rig Deck Engine : CAT 3406B Diesel Engine Rated at 500 HP Rebuilt 4-1-19 (1,900 Hours Since Rebuild) New Starter and New Batteries Compressor System : GHH 1100 CFM / 350 PSI Air Compressor (Installed 2017) New Cooler (0 Hours) New Separator Filter (10 Hours) New Hercules Controls and Butterfly Valve Drill Features : 6-Rod Carousel Water Injection Pump 40,000 Lbs. of Pullback High Torque Head and Power Motors Table swings out Pipe Rack Holds 300 Ft Of 4-1/2" X 20ft Drill Pipe With 3-1/2" REG Connection Hydraulic Leveling Jacks Maintenance & Upgrades : All Hydraulic Cylinders Rebuilt (Except Jacks) All Controls Rebuilt 85% of Hydraulic Hoses Replaced Air Lines Replaced Filtered And Regulated Auxiliary Air Off Rig Compressor (For Diaphragm Pump, Air Cylinder, Etc.) Top Head Resealed Mounted on Mack Truck : Mack Diesel Engine Rated at 350 HP New Transmission and Clutch (Installed In 2020) Tires : 8 New Drive Tires (Less Than 300 Miles) Steer Tires Have 3,000 Miles Additional Truck Upgrades : New windshields New batteries Driver side seat replaced Power steering hoses replaced Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. --------------------------------------------------------------------------------------------------------- Search words (for official use only) : 1998 Built Reichdrill T690 Drilling Rig for Sale Reichdrill T690 Drilling Rig - 1998 Built for Sale Used Reichdrill T690 Drilling Rig for Sale Reichdrill T690 Used Land Drilling Rig for Sale Reichdrill T690 Drilling Rig for Sale in USA -------------------------------------------------------------------------------------------------------
Canterra CT250 Torquemaster Series Monitoring Rig for Sale Drilling Rig - Canterra CT250 Torquemaster Series - For SaleModel : CT250 Torquemaster Series Monitoring Drill Rig Manufacturer : Canterra Year : 1991 Condition : Used Description : 1991 Canterra CT250 Torquemaster Series Monitoring Drill Rig - S/N: C7250-00054 Set up for water well & geotech drilling for auger & coring 10,000 Ft-Lb Rotary Torque Stepless Rotary Speed, 0-175 Rpm Gear Driven Rotary, Instantly Reversible 18,500 Pounds Pullback, 0·90 Fpm 18,500 Pounds Pulldown, 0-90 Fpm Long 23ft Foot Stroke, Chain Feed Cummins Diesel Engine On Deck Triple Stage Engine Air Filtration High Capacity Hydraulic Oii Cooler All Functions Hydraulically Operated Variable Speed Integrated Hydraulic Control Manifold Top Drive Swings Off Hole Vertically Failsafe Hydraulic Winch Breakout Table And Hydraulic Wrench Coring Speed Shift Range 1-710 Rpm Water Well Rotary Head, 3150 Ft-lb / 0-115 Rpm Sandline Wich Auto Sample Spudder Two Inch Circulating Plumbing Two Inch Swivel For Mud Air Or Foam Drilling 3x4 Centrifugal Mud Pump Moyno Pump 200 Cfm Developmental Air Compressor Jib Winch For Handling Augers, Rods, Tools Single Rod Loader For Adding Rods Rod Spinner Powered Breakout Table Cathead - Hydraulic Powered Wagtail, Slid Base Auger Guides Suitable For Dth Hammer Rock Drilling With Auxiliary Air Compressor Lubrication For Downhole Hammers 4 Leveling Jacks Auger Rack Coring Spudder Etc. Are Included But Not Currently Mounted On Drill As Previous Operator Was Using For Mud Rotary And Air Rotary Drilling Rated To Drill Up To 8" Diameter Holes To 500 Ft. Depth Can Also Run Hollow Stem Augers To 180 Ft Core Drill To 80-0 Ft Nearly $50,000 Worth Of Repairs And Upgrades Completed In 2022 Through 2023 Including 1 New Hydraulic Pump And 1 Reman Hydraulic Pump Comes With 400 Feet Of 3-1/2 Inch Od By 20 Foot Drill Pipe Mounted On 1991 International 4800 Series Truck 4x4 (4-Wheel Wheel Drive) Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. --------------------------------------------------------------------------------------------------------- Search words (for official use only) : 1991 Built Canterra CT250 Torquemaster Series Monitoring Rig for Sale Canterra CT250 Torquemaster Series Monitoring Drilling Rig - 1991 Built Used Canterra CT250 Torquemaster Series Monitoring Rig for Sale Canterra CT250 Torquemaster Series Monitoring Used Rig for Sale Canterra CT250 Torquemaster Series Monitoring Rig for Sale in USA -------------------------------------------------------------------------------------------------------
Sandvik T1000 Drilling Rig for Sale 2007 Built Sandvik T1000 Drilling Rig for Sale
Model : T1000 Drill Rig - Water Well Manufacturer : Sandvik Year : 2007 Condition : Used
2007 Sandvik T1000 Drill Rig
Note : Converted to a water well drill rig (repairs & services completed and ready to go to work on projects)
Deck Engine : CAT C-15 Diesel - Rated 540 HP @ 1,800 RPM (Rebuilt May 2025) Air Compressor : Sullair 1,000 cfm / 350 psi Carousel : Handles 4" Drill Pipe, Includes 3 Pipe (20ft Ft X 4") Cooling System : AKG Cooler, 48” 8-Blade Fan @ 1,100 RPM Water Injection Pump : GPM Bean System Rod Winch : 1 Unit
Drilling Capabilities & Features : Angle Drilling : 0 To 25 Degrees Stability : 4 Leveling Jacks Pump Drive : Funk 28000 Series Type 3, Ratio 0.91:1 Hammer Lubricator
Converted to Water Well Drilling at EWD : Installed : Includes all the repairs & services completed Operators Step and Stand for Control Panel Pipe Trough, Jib Boom, Rod Handling Winch, Etc.
Dimensions & Weight : Length : 37 Ft Width : 8 Ft 6" In Height : 13 Ft 2" In
Truck Mount - 2006 Sterling LT9500 Vin : 2FZHAZCV77AX19517 Transmission : 8LL Engine : Mercedes-Benz Diesel MBE4000-370 12.8l, 370 Hp @ 1,900 RPM 2,000 Governed Rpm 1,450 Lb.-Ft @ 1,100 RPM Tires : Front : 425/65R 22.5, Tubeless Radial Rear : 11R 22.5, Tubeless Radial Dimensions & Weight : Length : 37 Ft Width : 8 Ft 6 In Height : 13 Ft 2 In
--------------------------------------------------------------------------------------------------------- Search words (for official use only) : Sandvik T1000 Drilling Rig - 2007 Built - For Sale Drilling Rig - Sandvik T1000 - For Sale Used Sandvik T1000 Drilling Rig for Sale Sandvik T1000 Used Land Drilling Rig for Sale Sandvik T1000 Drilling Rig for Sale in USA ---------------------------------------------------------------------------------------------------------
Used Ideco H37 Rig For sale Mechanical Drilling Rig - IDECO H37 6500’ For sale
Derrick National Double Derrick Scope Up (New RAM) Bottom section 33-1/2 feet > 89 Ft Working room Top section 56 feet - 91 feet overall
Drawworks Double drum – IDECO H37 All bearings have been checked, new brake pads CAT Engine, 550 hp, 0 time – Brand new, with Allison Transmission. Draw works trailer-mounted 3 New Tandem Axels – New Brakes and air lines tires steel radials – 20 inch Substructure 6’6” tall trailer-mounted with cat walk, 12’ sub-structure at rotary table level Ramp 5 ft tall. Catwalk & rotary table trailer-mounted 2 axel tandem, new axels, tires and airlines
Mud Pumps (1)Wilson Snider 6” X 16” Stroke 12893 (2)Wheland 7 1/2” Liners X 14” Stroke p/b Cummings 350 hp engine, (3)Gardner Denver FXK 1952 6” X 14” Stroke p/b CAT 500 hp engine API Fluid End Traveling blocks BJ – 460 ton w/ 6 lines Swivel – REWSTE 4 Sx Water Pump 4” X 6” Stroke Gardner Denver FXG 137 Gallon fuel tank mounted on pump Skid – Powered by 3 cylinder Detroit diesel Rotary table, National 12-1/2” Water Tank 8’W X 8’D X 38-1/2” L – 400 barrel tank Top Dog House Double wall insulated 8’ W X 35’ L - 40 all over Bottom Dog House 7’10” W X 23’10” L Mud Pit 4’ deep X 7’ W X 40’ L Generator, CAT powered. To see more information and pictures, please see http://www.worldoils.com/landrigs/rig250.php Price & terms : Please enquire using the email form below.
The details mentioned above are believed to be accurate but are not guaranteed. ------------------------------------------------------------------- Search words(for official use only) : Land rig - 550hp for sale 550hp Drilling Rig for sale Ideco H37 Drilling Rig For sale Ideco H37 for sale Mechanical Drilling Rig for sale -------------------------------------------------------------------
Atlas Copco RD20 Range III Drilling Rig for Sale Drilling Rig - Atlas Copco RD20 Range III - For Sale Model : RD20 III Drill Rig Manufacturer : Atlas Copco Year : 2005 Condition : Used Description : 2005 Atlas Copco RD20 Range III Drill Rig - S/N:6923 CUMMINS QSK19 Diesel Deck Engine - S/N: 60604066 IR 1250 cfm / 350 psi Rotary Screw Air Compressor with Cooler FMC Triplex Mist Pump Compound with (4) Hydraulic Pumps Mounted on a CCC (Crane Carrier Company) Truck - VIN: 1CYDGV5875T046700 CAT C-13 Diesel Engine FULLER 8-Speed Transmission (4) Hydraulic Leveling Jacks Drillers Control Console (2) Hydraulic Mast Raising Rams 425/65R22.5 Front & 11R-22.5 Rear Tire Note: Can be purchased with or without mounting the Range III Tower with 120,000 lbs of pullback & table at EWD cost extra Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. ---------------------------------------------------------------------------------------------------------------------------------------- Search words (for official use only) : Atlas Copco RD20 Range III Drilling Rig - 2005 Built - For Sale 2005 Built Atlas Copco RD20 Range III Drilling Rig for Sale Used Atlas Copco RD20 Range III Drilling Rig for Sale Atlas Copco RD20 Range III Used Drilling Rig for Sale Atlas Copco RD20 Range III Drilling Rig for Sale in USA -----------------------------------------------------------------------------------------------------------------------------------------------
Schramm T64HB Drilling Rig for Sale Drilling Rig - Schramm T64HB - For Sale Model : T64HB Drill Rig Manufacturer : Schramm Year : 1978 Condition : Used Description : 1978 Schramm T64HB Drill Rig Detroit 8V92 Diesel Deck Engine Sullair 750 cfm / 350 psi Air Compressor SN: 1274 Bean Water Injection Hammer Lubricator Updated Spool Valves 240 Ft of Drill Pipe included Mounted on a Peterbilt Truck Cummins Diesel Engine 15 Speed Transmission Air Controls Need Adjustment Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. --------------------------------------------------------------------------------------------------------- Search words (for official use only) : 1978 Built Schramm T64HB Drilling Rig for Sale Schramm T64HB Drilling Rig - 1978 Built for Sale Used Schramm T64HB Drilling Rig for Sale Schramm T64HB Used Land Drilling Rig for Sale Schramm T64HB Drilling Rig for Sale in USA -------------------------------------------------------------------------------------------------------
Ingersoll-Rand TH60 Drilling Rig for Sale Drilling Rig - Ingersoll-Rand TH60 - For Sale Model : TH60 Drill Rig Manufacturer : Ingersoll-Rand Condition : Used Description : Ingersoll-Rand TH60 Drill Rig Mounted on a 1999 Paystar 5000 International Truck CAT C12 Diesel Engine TH60 was completely rebuilt in 2011 500 cfm / 250 psi Air Compressor 3-inch Rod Carousel with 250 feet of Drill Rods Winch Dust Control System Water Injection Pump Enclosed Operator Cab Drill and Engine 4925 hours Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. --------------------------------------------------------------------------------------------------------------------------- Search words (for official use only) : Used Ingersoll-Rand TH60 Drilling Rig for Sale Ingersoll-Rand TH60 Drilling Rig - 2011 Rebuilt for Sale Ingersoll-Rand TH60 Used Drilling Rig for Sale 2011 Rebuilt Ingersoll-Rand TH60 Drilling Rig for Sale Ingersoll-Rand TH60 Drilling Rig for Sale in USA --------------------------------------------------------------------------------------------------------------------------------------
Atlas Copco T3W Drilling Rig for Sale Atlas Copco T3W Drilling Rig - 2009 Built for Sale Model : T3W Drill Rig - 40K pullback Manufacturer : Atlas Copco Year : 2009 Condition : Used Description : 2009 Atlas Copco T3W Drill Rig Caterpillar C15 Diesel Deck Engine Engine Serial Number : JRE 01086 Rebuilt : February 24th 1070 cfm / 350 psi Air Compressor Serial Number : 11999U24CQ New : April 2024 New Compressor Cooler – Installed June 2024 Pull Back Force – 40,000 LBS In-N-Out Box – For Compressor Disconnect Single Rod Loader New Cables – Installed 2023 Swivel Rebuild – October 2024 Fan Motor and Pump – Recently rebuilt Drill Pipe – 780 ft of (4½" x 20ft) Mounted on International Work Horse 7600 Truck VIN : 1HTWYSBTX9J090449 Caterpillar C13 Diesel Engine Engine Brake Full Lockers Transmission : 8LL Good Tires & Hydraulic Leveling Jacks Brake Cans, Brake Pads, and Brake Drums replaced in 2025 Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. --------------------------------------------------------------------------------------------------------- Search words (for official use only) : 2009 Built Atlas Copco T3W Drilling Rig for Sale Used Atlas Copco T3W Drilling Rig for Sale Drilling Rig - Atlas Copco T3W - For Sale Atlas Copco T3W Used Drilling Rig for Sale Atlas Copco T3W Drilling Rig for Sale in USA -------------------------------------------------------------------------------------------------------
Mobile B-61 HDX Drilling Rig for Sale Mobile B-61 HDX Drilling Rig - 1991 Built - For Sale Model : B-61 HDX Drill Rig Manufacturer : Mobile Year : 1991 Condition : Used Description : 1991 Mobile B-61 HDX Drill Rig - S/N: 91009 PULLMASTER Main & RKI Secondary Winches 30ft H Hydraulic Raised Stiff Mast Integrated Table Hydraulic Tong Assembly 2005 CUMMINS 3.9L Diesel Engine HPU MOYNA Hydraulic Water Injection Pump Water Tank Drilling Capacities : Rotary Drilling with 2-5/8” diameter drill rod…… 1350 ft. (410 m). = we can provide new drill pipe like this at additional cost approximately $250 USD per 5 ft. stick. Core Drilling with AW size tools or AQ wire line… 2250 ft. (685 m). Core Drilling with NW size tools or NQ wire line… 1350 ft. (410 m). Continuous Flight-Auger Diameter Range…... up to 14” (355 mm). Max. Depth w/ 6” Dia. (152.4 mm) Augers…………………………….. 360 ft. (110 m). Max. Depth w/ 8” Dia. (203.2 mm) Augers…………………………….. 250 ft. (76.2m). Note: Drilling Capacities are based on maximum depths obtained in actual field test and will vary with local subsurface conditions.
IHC 6-Cyliner Diesel Engine EATON 8-Speed Transmission (3) Hydraulic Leveling Jacks 10.00R20 Front & 11R22.5 Rear Tires & 210" WB Dayton Wheels (75,751 Odometer Miles) Note: If you are wanting to do direct rotary drilling with drill pipe and roller cone bit or DTH hammer then you will need an add auxiliary mud pump or auxiliary air compressor. If you do not have mud pump or compressor then we do have some options in stock we can offer at additional costs : Ingersoll-Rand 400 CFM / 200 PSI air compressor, enclosed, trailer mounted. Ingersoll-Rand 600 CFM / 125 PSI air compressor, enclosed, trailer mounted. Ingersoll-Rand 750 CFM / 300 PSI Air Compressor mounted on 1996 Volvo truck p/b Cat 3406E. Sullair 900 CFM / 350 PSI air compressor, enclosed, skid mounted. Gardner Denver FXFF 4 x 5 Duplex mud pump p/b CAT 3304, skid mounted. Gardner Denver FXF 4 x 5 Duplex mud pump p/b Waukesha 4-cylinder diesel engine, skid mounted. Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. --------------------------------------------------------------------------------------------------------- Search words (for official use only) : Drilling Rig - Mobile B-61 HDX - for Sale 1991 Built Mobile B-61 HDX Drilling Rig for Sale Used Mobile B-61 HDX Drilling Rig for Sale Mobile B-61 HDX Used Land Drilling Rig for Sale Mobile B-61 HDX Drilling Rig for Sale in USA -------------------------------------------------------------------------------------------------------
Chicago Pneumatic CP650W Drilling Rig - For Sale Drilling Rig - Chicago Pneumatic CP650W - For Sale Model : T650W Drill Rig Manufacturer : Chicago Pneumatic Condition : Used Description : Chicago Pneumatic CP650W Drill Rig 450 CFM / 250 PSI Piston Compressor 3306 CAT Deck Engine Cummins Truck Engine 350 ft Drill Pipe Table Bushings Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. --------------------------------------------------------------------------------------------------------- Search words (for official use only) : Chicago Pneumatic Used Drilling Rig for Sale Chicago Pneumatic Land Drilling Rig for Sale Chicago Pneumatic CP650W Drilling Rig for Sale in USA Used Chicago Pneumatic CP650W Drilling Rig for Sale Chicago Pneumatic Used Land Drilling Rig for Sale -------------------------------------------------------------------------------------------------------
CME 850 Drilling Rig for Sale CME 850 Drilling Rig - 1999 Built for Sale Model : 850 Drill Rig Manufacturer : CME Drill Year : 1999 Condition : Used Description : 1999 CME 850 Drill Rig - Serial: 292492 Hours : 8,683 on meter Cummins 4BT Diesel Engine with 4 Cylinders Transmission : Hydrostatic 5-speed with reverse Features : Mast height: 23 ft Pump : Moyno 3L8, Size: 3" diameter Mounted on a Track Carrier Tracks Width : 33" Rubber/Steel Auto hammer Front winch 28,275 lbs of Pullback Notes : Runs and drives when tested last Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. --------------------------------------------------------------------------------------------------------- Search words (for official use only) : 1999 Built CME 850 Drilling Rig for Sale Drilling Rig - CME 850 - For Sale Used CME 850 Drilling Rig for Sale CME 850 Used Land Drilling Rig for Sale CME 850 Drilling Rig for Sale in USA -------------------------------------------------------------------------------------------------------
Atlas Copco L830 Crawler Drilling Rig for Sale Drilling Rig - Atlas Copco L830 Crawler - For Sale Model : L830 Crawler Drill Rig Manufacturer : Atlas Copco Year : 2008 Condition : Used Description : 2008 Atlas Copco Roc L8-30 Crawler Drill Rig S/N: AVO08A1240 Set up for 4” drill pipe 4.5" - 8" DTH Class CAT C15 Diesel Engine - Rebuilt on 3-21-20 at 15,132 hours Current frame hours 17,863 Rotary head hours 8,987 High Pressure 995 CFM / 435 PSI Air Compressor - Rebuilt on 5-15-2017 Oil Cooler pack replaced on 10-31-2017 Break Out Table Dust Collector Cable Feed System Aluminum Profile Guide shell 17,000+ Hour Machine Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. --------------------------------------------------------------------------------------------------------- Search words (for official use only) : Used Atlas Copco L830 Crawler Drilling Rig for Sale 2008 Built Atlas Copco L830 Crawler Drilling Rig for Sale Atlas Copco L830 Crawler Drilling Rig - 2008 Built - For Sale Used Atlas Copco L830 Crawler Land Drilling Rig for Sale Atlas Copco L830 Crawler Drilling Rig for Sale in USA -------------------------------------------------------------------------------------------------------
CME 55 Drilling Rig for Sale Drilling Rig - CME 55 - For Sale Model : 55 Drill Rig Manufacturer : CME Drill Year : 1973 Condition : Used Description : 1973 CME 55 Drill Rig Mounted on a 1980s Ardco Model K Carrier Both Rig and Carrier Powered by Ford 300 CID Gasoline Engines Equipped with a Single Wireline Winch Moyno 3L6 Pump Included Previously Transported with a RAM 3500 Tooling available Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. ---------------------------------------------------------------------------------------------------------------------- Search words (for official use only) : 1973 Built CME 55 Drilling Rig for Sale CME 55 Drilling Rig - 1973 Built for Sale Used CME 55 Drilling Rig for Sale CME 55 Used Drilling Rig for Sale CME 55 Drilling Rig for Sale in USA -------------------------------------------------------------------------------------------------------------------------
Reichdrill T650 Drillling Rig for Sale Reichdrill T650 Drillling Rig - 1985 Built for Sale
Model : T650 Drill Rig Manufacturer : Reichdrill Year : 1985 Condition : Used
1985 Reichdrill T650 Drilll Rig Detroit Silver 8V92TA Diesel Deck Engine (new in 2012) Sullair 840 cfm / 350 psi air compressor Sliding angle mast / tower – set up for mineral exploration and allows tracking at angle without additional boom. Note : One new drill quill sub remove the side inlet swivel, it actually set up to switch easily to do water wells Retractable 4” Bull hose Reel Bean water injection pump 50,000 lbs of pullback Cyclone - 800 ft of Matrix 4.5” drill rods (cost extra) Mounted on a Ford 9000 Truck Detroit 8V92 diesel engine 13 speed transmission Jake brakes Note : There were about 5 drills built using the T4 control panel Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. -------------------------------------------------------------------------------------------------------------------------------- Search words (for official use only) : 1985 Built Reichdrill T650 Drillling Rig for Sale Used Reichdrill T650 Drillling Rig for Sale Drillling Rig - Reichdrill T650 - For Sale Reichdrill T650 Used Land Drillling Rig for Sale Reichdrill T650 Drillling Rig for Sale in USA -----------------------------------------------------------------------------------------------------------------------------------
Speedstar SS-210 Rotary Drilling Rig for Sale Drilling Rig - Speedstar SS-210 - For Sale Model : SS-210 Rotary Drill Rig Manufacturer : Speedstar Year : 1974 Condition : Used Description : 1974 Speedstar Model SS-210 Rotary Drill Rig Mounted on a 1974 CCC (Crane Carrier) Truck that has less than 10,000 Miles Diesel Engine Gardner - Denver Air Compressor WEJ 1009 - 7.75 & 5.5 X 6 Also has Stabilizes Subs Assorted Drill Bits Hammer 10" & 8" & 6" 200 ft drill rods on Rotary Rig 1,000 ft extra drill rods Fishing Tools Original Book / Catalogs with info & parts numbers Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. --------------------------------------------------------------------------------------------------------- Search words (for official use only) : 1974 Built Speedstar SS-210 Rotary Drill Rig for Sale Used Speedstar SS-210 Rotary Drilling Rig for Sale Speedstar SS-210 Rotary Drill Rig - 1974 Built for Sale Land Drilling Rig - Speedstar SS-210 Speedstar SS-210 Rotary Drill Rig for Sale in USA -------------------------------------------------------------------------------------------------------
Atlas Copco T4BH (Blasthole) Drilling Rig for Sale Drilling Rig - Atlas Copco T4BH (Blasthole) - For Sale Model : T4BH (Blasthole) Drill Rig Manufacturer : Atlas Copco Year : 2009 Condition : Used Description : 2009 Atlas Copco T4BH (Blasthole) Drill Rig - S/N: 8887 Cummins QSK19 Diesel Deck Engine - rated 755HP & 1800 RPM IR HR2.5 1250 cfm / 350 psi Air Compressor Hour meter shows 3157.3 Hours 2 Motor Spur Gear Power Head with Foremost float sub 37,500 Lbs of Pullback 5 Rod Carousel set up for (3) 7” drill pipe Hammer lubrication 2 Piston Bean water injection 2009 Mounted on CCC (Crane Carrier Company) Truck - VIN#1CYDCV58X9T048815 Caterpillar C13 Diesel Engine - rated 325 HP Jake brakes 8LL Speed Transmission Note: Can be converted to T4W or T4W DH for water well drilling for an extra cost Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. -------------------------------------------------------------------------------------------------------------------------------- Search words (for official use only) : 2009 Built Atlas Copco T4BH (Blasthole) Drilling Rig for Sale Used Atlas Copco T4BH (Blasthole) Drilling Rig for Sale Atlas Copco T4BH (Blasthole) Drilling Rig - 2009 Built for Sale Atlas Copco T4BH (Blasthole) Used Land Drilling Rig for Sale Atlas Copco T4BH (Blasthole) Drilling Rig for Sale in USA -----------------------------------------------------------------------------------------------------------------------------------------
Schramm T64HB Drilling Rig For Sale Drilling Rig - Schramm T64HB for Sale Model : T64HB Drill Rig Manufacturer : Schramm Year : 1977 Condition : Used Description : 1977 Schramm T64HB Drill Rig Retrofitted Sullair 900 cfm / 350 psi Air Compressor Caterpillar 3406 Diesel Deck Engine 3-Piston T Series 47 General Pump T921 Water Injection Pump 4 Rod Lazy Susan set up for 4.5" Diameter 20ft Rods (2 Rods Included) Pipe Rack Hydraulic Leveling Jacks Mounted on a 1977 International Paystar 5000 Truck - VIN #D3127GGB13741 Diesel Engine Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. --------------------------------------------------------------------------------------------------------- Search words (for official use only) : Schramm Used Drilling Rig for Sale 1977 Built Schramm T64HB Drilling Rig for Sale Used Schramm T64HB Drilling Rig - 1977 Built for Sale Schramm Land Drilling Rig for Sale Schramm T64HB Drilling Rig for Sale in USA -------------------------------------------------------------------------------------------------------
Chicago Pneumatic T650 WS Drilling Rig For Sale Used Drilling Rig - Chicago Pneumatic - For Sale Model : T650 WS Drill Rig Manufacturer : Chicago Pneumatic Year : 1979 Condition : Used Description : 1979 Chicago Pneumatic T650WS Drill Rig GHH 825 cfm / 300 psi Air Compressor Caterpillar 3406B Diesel Deck Engine 6-Rod Carousel Set Up for 4-1/2" x 20 ft Drill Pipe Rod Rack Hydraulic Leveling Jacks 12,000 lbs Sandline Hammer Lubricator Mounted on a Ford 8000 Truck - VIN #U80QVEC65I9 Caterpillar 3208 Diesel Engine 73,246 Miles Showing on Odometer Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. ------------------------------------------------------------------------------------------------------------------------------- Search words (for official use only) : Chicago Pneumatic T650 WS Drilling Rig - 1979 Built - For Sale 1979 Built Chicago Pneumatic T650 WS Drilling Rig for Sale Used Chicago Pneumatic Drilling Rig Chicago Pneumatic Used Drilling Rig for Sale Chicago Pneumatic T650 WS Drilling Rig for Sale in USA ---------------------------------------------------------------------------------------------------------------------------------
Hydraulic Land Drilling Rig for Sale New Hydraulic Land Drilling Rig - 1000hp 1000hp Hydraulic Land Drilling Rig New Land Drilling Rigs for Sale
Specifications Mast (Telescopic Mast) Max. hook load : 100tn (200,000 lbs) Stroke length : 16.4 m (53.8 ft) Total height incl. substructure : 26 m (85ft) Drilling axis : 800 mm (31.5 in) Substructure & Drill floor - Self-erecting (trailer-based) Drill floor height : 5 m (16.4 ft) Clear height below drill floor : 4.1 m (13.5 ft) Rotary opening : 698.5 mm (27 ½ in) Drill floor dimensions : 10 x 4 m (33 x 13 ft) Hoisting System (Cylinder System) Pulling capacity : 100 tn (200,000 lbs) Pull down capacity : 22 tn (44,000 lbs) Working clearance to table (under safer sub) : 16.4 m (53.8 ft) Top Drive - TDK-32-150-H - hydraulically driven Load capacity : 150 tn (300,000 lbs) Max. drilling torque * : 32.000 Nm (23.600 ft-lbs) Max. breaking torque * : 38.000 Nm (28,000 ft-lbs) Drilling speed : 0 – 177 rpm Clamping & breaking device* : 100.000 Nm (73.760 ft-lbs) Rated power * : 280 kW (375 HP) Pressure stage * nominal value : 350 bar (5,000 psi) Engine (Caterpillar C 27 ACERT) Rated power : 708 kW (950 HP) Diesel tank capacity : 1.700 l (448 gal) Pipe handling system - V-door type (trailer-based) Max. drill pipe length : Range III Max. casing length : Range III Transport dimensions rig module Total weight (excl. truck) : app. 59 t (130,000 lbs) Length (king pin to rear) : 12.6 m (41.3 ft) Height (incl. top drive) : 4.2 m (13.7 ft) Width : 2.5 m (8.2 ft) Mast The self-standing, telescopic mast consists of two independent sections with box-type profiles. The outer mast section is connected to the trailer frame and is equipped with guides for the inner mast section. This sliding inner mast section is lifted by a central feed cylinder system and allows lifting and pull-down operations. Two integrated backstay cylinders raise the mast system into the working position including crown block and top drive. The telescopic mast system is designed to handle drill pipes and casings up to Range III. No external guy lines are necessary. Hoisting system The hoisting system consists of a central, single cylinder with enhanced buckling resistance. The central cylinder is integrated inside the inner moving mast section directly below the main rope top sheaves. The double reeved, twin-wire rope system allows the top drive twice the lifting stroke and speed of the cylinder. The hoisting system enables lifting and pull down operations. Semi-trailer and substructure The rig frame is directly connected to the five (5) axles semi-trailer. The semi-trailer is in accordance with standard road regulations and equipped with a coupling pin according to client’s requirements. Driller’s cabin The driller’s cabin is located on the drill floor and offers a high quality workplace with joystick control. The driller controls all drilling functions centrally from the ergonomic and air-conditioned cabin. The built-in instrumentation system provides clear information to the driller at any time. The system is optionally equipped with a digital data visualization and data acquisition system. Transport and set-up The compact and trailer-based transport units allow a fast and safe moving and rig-up/down operation and a reduction of transport costs. The compact footprint of the drilling unit, reduces the costs for wellsite preparation and the environmental impact. Substructure and drill floor The trailer-based substructure is equipped with a selferecting system to lift the drill floor including driller’s cabin and power tong to the final working position. The clear height of 4,1m below the drill floor allows sufficient space for BOP installations. The compact transport unit including driller’s cabin, power tong, walkways and handrails allows fast moving operations with high HSE standards. Pipe handling system The automated pipe handling system with hands-off technology allows drill pipe and casing operation without the necessity of a finger board and increases the personal safety. For redundancy reasons the pipes can also be handled by using the utility winch and the V-door ramp. Top drive The hydraulically operated top drive TDK 150 H is based on 40 years of experience in manufacturing rotary heads for drilling rigs. It is designed to meet advanced performance standards in terms of high drilling torque, high make up and break out torque, rotation speed, reliability and serviceability. Additional main components Power tong with spinning function 2-7/8” – 8-1/2” 2 catheads with 140 kN pulling capacity Hydraulic slip lifting device Utility winch with 4 tn lifting capacity Optional equipment and services Customized mud handling systems Triplex mud pumps 24/7 after sales service with worldwide spare and wear part availability Remote access and troubleshooting via WAN Training Center for customer’s personnel
Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. ------------------------------------------------------------------------------------------------------------------- Search words(for official use only) - Hydraulic Land Drilling Rig for Sale in Europe Hydraulic Land Drilling Rig - 750hp For Sale Hydraulic Land Drilling Rig - 1000hp - For Sale New 1000hp Hydraulic Land Drilling Rig 750hp Hydraulic Land Drilling Rig for sale 1000hp Hydraulic Land Drilling Rig for Sale in Europe Land Drilling Rigs for Sale in Europe New 750HP Hydraulic Land Drilling Rig for sale in Europe ---------------------------------------------------------------------------------------------------------------------
CME 55 Drilling Rig for Sale Drilling Rig - CME 55 - For Sale Model : 55 Drill Rig Manufacturer : CME Drill Year : 1985 Condition : Used Description : 1985 CME 55 Drill Rig Mounted On a 1996 Morooka MST 1100 Rubber Track Carrier - front winch 463 Hours On Deck Motor - Engine Has Oil Blowby 3l6 Moyno Pump Wiggle Tail Slide Base Rig Has Deck Toolbox Cathead and 2 Winches 150-Gal Water Tank 10 Ft Rod Rack Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. --------------------------------------------------------------------------------------------------------- Search words (for official use only) : 1985 Built CME 55 Drilling Rig for Sale Used CME 55 Drilling Rig for Sale CME 55 Drilling Rig - 1985 Built for Sale CME 55 Used Land Drilling Rig for Sale CME 55 Drilling Rig for Sale in USA -------------------------------------------------------------------------------------------------------
CME 55 Drilling Rig for Sale Drilling Rig - CME 55 - For Sale Model : 55 Drill Rig Manufacturer : CME Drill Year : 1970 Condition : Used Description : 1970 CME 55 Drill Rig Mounted on a Ardco Model K Gas On Gas, Both 300 CID Two Winches Wireline Winch Pullmaster PL1 Winch Cat Head Moyno 3L6 Pump Tooling Available Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. --------------------------------------------------------------------------------------------------------- Search words (for official use only) : 1970 Built CME 55 Drilling Rig for Sale CME 55 Drilling Rig - 1970 Built for Sale Used CME 55 Drilling Rig for Sale CME 55 Used Drilling Rig for Sale CME 55 Drilling Rig for Sale in USA -------------------------------------------------------------------------------------------------------
Reichdrill T690 Drilling Rig for Sale Drilling Rig - Reichdrill T690 - For Sale Model : T690 Drill Rig Manufacturer : Reichdrill Year : 1998 Condition : Used Description : 1998 Reichdrill T690 Drill Rig CAT 3406B Diesel Deck Engine - rated 500 HP GHH 1100 cfm / 400 psi Air Compressor 6 Rod Carousel Water Injection Pump 40,000 lbs of Pullback High Torque Head and power motors Table Swings Out Pipe Rack (holds 300 ft of 4-1/2" x 20 x 3-1/2" reg) Hydraulic Leveling Jacks The following parts have been replaced/rebuilt from 2017 - 2020: Rebuilt Air Compressor (about 1,000 since) Radiators Rebuilt Deck Engine (about 300 hours since) Fuel Tanks New Transmission New Clutch New Cab Mounted on a Mack truck Mack Diesel Engine - rated 350 HP 57,000 +- miles Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. --------------------------------------------------------------------------------------------------------- Search words (for official use only) : 1998 Built Reichdrill T690 Drilling Rig for Sale Reichdrill T690 Drilling Rig - 1998 Built - For Sale Reichdrill T690 Used Drilling Rig for Sale Used Reichdrill Land Drilling Rig for Sale Reichdrill Drilling Rig for Sale in USA -------------------------------------------------------------------------------------------------------
Watson 3000 Caisson / Foundation Drilling Rig for Sale Drilling Rig - Watson 3000 Caisson - For Sale Model : 3000 Caisson / Foundation Drill Rig Manufacturer : Watson Year : 1987 Condition : Used Description : Watson 3000 Caisson / Foundation Drill Rig Model : 3110CM S/N : 15191 325bl side frame 2138653 L5n06627 frame 215-6451 PE6068r027268 Diesel Engine - 6575 Hours Track Mounted Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. --------------------------------------------------------------------------------------------------------------------------- Search words (for official use only) : 1987 Built Watson 3000 Caisson / Foundation Drilling Rig for Sale Used Watson 3000 Caisson / Foundation Drilling Rig for Sale Watson 3000 Caisson Drilling Rig - 1987 Built for Sale Watson 3000 Foundation Drilling Rig for Sale Watson 3000 Caisson / Foundation Drilling Rig for Sale in USA -------------------------------------------------------------------------------------------------------------------------------
Simco 2800 Drilling Rig for Sale Simco 2800 Drilling Rig - 2009 Built - For Sale Model : 2800 Manufacturer : Simco Year : 2009 Condition : Used Description : 2009 Simco 2800 Drill Rig Note: This is set up as a water well / geothermal drill & If you prefer a 2800 HSHT set up for geotechnical drilling with auto hammer that is possible, Rod 3" PDQ style 10 foot length Ingersoll-Rand 375 CFM / 170 PSI Air Compressor Centerline Monoplex Mud Pump Rod box FMC I0413C Water injection pump Deutz Diesel Deck Engine (rated 70 HP) 2 Winches Mounted on a 1994 Chevrolet Kodiak 4x4 truck Caterpillar 3116 Diesel Engine Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. ---------------------------------------------------------------------------------------------------------------- Search words (for official use only) : 2009 Built Simco 2800 Drilling Rig for Sale Used Simco 2800 Drilling Rig for Sale Simco Drilling Rig for Sale in USA Drilling Rig - Simco 2800 - For Sale Simco 2800 Used Drilling Rig for Sale in USA ----------------------------------------------------------------------------------------------------------------
Failing Holemaster 1000 Drilling Rig for Sale Drilling Rig - Failing Holemaster 1000 - For Sale Model : Holemaster 1000 Drill Rig Manufacturer : Failing Condition : Used
Failing Holemaster 1000 Drill Rig Mounted on a 1974 Mack truck V8 Mack engine new 2" Little Giant swivel 23ft kelly 5-1/4" rotary table 256 LeRoi air compressor Gardner Denver 5x6 piston pump 2 hydraulic leveling jacks Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. --------------------------------------------------------------------------------------------------------- Search words (for official use only) : Used Failing Holemaster 1000 Drilling Rig for Sale Failing Holemaster 1000 Used Drilling Rig for Sale Failing Holemaster Drilling Rig for Sale in USA Failing Drilling Rig for Sale in USA Failing Holemaster 1000 Drilling Rig for Sale in USA -------------------------------------------------------------------------------------------------------
Chicago Pneumatic T650 Drilling Rig for Sale Chicago Pneumatic Used Drilling Rig for Sale Model : T650 Drill Rig Manufacturer : Chicago Pneumatic Condition : As-Is Description : Chicago Pneumatic T650 Drill Rig Mounted on a 6 x 6 Oshkosh Truck Modified drill rig Direct drive off of the truck engine 900 cfm / 350 psi air compressor Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. --------------------------------------------------------------------------------------------------------- Search words (for official use only) : Drilling Rig - Chicago Pneumatic T650 - For Sale Used Drilling Rig Chicago Pneumatic for Sale Chicago Pneumatic Land Drilling Rig For Sale Used Chicago Pneumatic Drilling Rig for Sale in USA Land Drilling Rig For Sale in USA -------------------------------------------------------------------------------------------------------
Chicago Pneumatic 600 Drilling Rig for Sale Chicago Pneumatic 600 Drilling Rig - 1979 Built - For Sale Model : 600 Drill Rig Manufacturer : Chicago Pneumatic Year : 1979 Condition : Used Description : 1979 Chicago Pneumatic 600 Drill Rig Detroit 6V93 Diesel Deck Engine GHH 600 CFM / 300 PSI Air Compressor 320 ft of 4-1/2" x 20 ft Drill Pipe included Recent Cooler and Drill Head Rebuilt Mounted on a 1990 Mack Truck 300 HP Diesel Engine Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. --------------------------------------------------------------------------------------------------------- Search words (for official use only) : 1979 Built Chicago Pneumatic 600 Drilling Rig for Sale Used Chicago Pneumatic 600 Drilling Rig for Sale Drilling Rig - Chicago Pneumatic 600 - For Sale Chicago Pneumatic 600 Used Drilling Rig for Sale Chicago Pneumatic 600 Drilling Rig for Sale in USA -------------------------------------------------------------------------------------------------------
Note: Bill of Sale Only Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. ----------------------------------------------------------------------------------------------------------------------------------- Search words (for official use only) : 2006 Built Atlas Copco T4BH Drilling Rig for Sale Atlas Copco T4BH Drilling Rig - 2006 Built - for Sale Used Atlas Copco T4BH (Blasthole) Drilling Rig for Sale Atlas Copco T4BH Land Drilling Rig for Sale Atlas Copco T4BH (Blasthole) Drilling Rig for Sale in USA ----------------------------------------------------------------------------------------------------------------------------------
Speedstar 70K Drilling Rig for Sale Drilling Rig - Speedstar 70K - For Sale Model : 70K Drill Rig Manufacturer : Speedstar Year : 1982 Condition : Used Description : 1982 Speedstar 70K Drill Rig 740 ft of 5" Drill Pipe 2 Drill collars Mounted on a CCC (Crane Carrier Company) Truck Diesel Engine Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. --------------------------------------------------------------------------------------------------------- Search words (for official use only) : 1982 Built Speedstar 70K Drilling Rig for Sale Used Speedstar 70K Drilling Rig for Sale Speedstar 70K Used Drilling Rig for Sale Speedstar 70K Drilling Rig - 1982 Built - For Sale Speedstar 70K Drilling Rig for Sale in USA -------------------------------------------------------------------------------------------------------
Mobile B-57 Drilling Rig for Sale Drilling Rig - Mobile B-57 for Sale Model : B-57 Drill Rig Manufacturer : Mobile Condition : Used Description : Mobile B-57 Drill Rig - S/N: 90073 Mounted on A 1990 Ford F-800 Truck - VIN#: 1FDXK84A5LVA35033 Diesel Engine With 150,000 Miles Set Up for Auger & Soil Sample Drilling Tooling Included : 110 Ft of Mobile 10” Auger 6-5/8" ID 110 Ft CME 8” Auger 3-3/4" ID Hand Tooling and Wrenches 1-1/2", 2" And 2.5" Samplers Note : Spindle Bearings and Kelly Bar Bearings Have Been Replaced With CME Bearings Recently Tires Are New Flywheel on Rig Motor Has Been Replaced Rotary Chain is Fairly New Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. --------------------------------------------------------------------------------------------------------- Search words (for official use only) : Used Mobile B-57 Drilling Rig for Sale Mobile Drilling Rig for Sale Mobile B-57 Used Land Drilling Rig for Sale Mobile B-57 Drilling Rig for Sale in USA Mobile Land Drilling Rig for Sale in USA -------------------------------------------------------------------------------------------------------
Workover Rigs For Sale SRE 600 Double - 4200m - Used Workover Rig - For Sale 4200m Used Workover Rigs For Sale
SRE-600 Model 4210 3808 drum size Self propelled, double drum, back in & 5 axel carrier Rated capacity of 4200m – 73mm tubing DDEC series 60 12.5 L 450 hp engine Allison CLT5860 6 speed transmission 25.4 X 101.6 c/w double 24” eaton main drum brake assist 101” cobalt air actuated sand line brakes SRE 107-210 - 32.6m rated 95dNa stung 6 lines mast 4200m of 73mm tubing racking capacity Ideco shorty 110 ton block hook 3 X 61cm sheaves & 25.4mm drill line Vapor proof florescent & sodium lights 25.4 mm X 300m drilling line 14mm X 3400 m sand line Hydraulic martin decker clipper weight indicator Dual winches Combination 3 compartment steel skidded building 3.5m w X 11.6M l John deer 75 kW generator Handling equipment Foster model 58-93R tubing tongs Cavins advance model C air slips BJ-90-TA-100 ton X 73mm & BJ-90-TA-65 ton X 60.3mm elevator 73mm & 60.3mm standard tubing sizes 19mm – 25mm rod sizes 2 - 2.4m w X 13.7m l & 1 – 2.4m w X 13.7m l rig mats 2.4m w X 12.5m l c/w 2 sets tumble catwalk racks Safety equipment 4 – 14kg dry chemical fire extinguishers 4 self-contained scott air pack breathing apparatuses c/w 2 spare bottles LEL monitor & 6 personal monitors gas detector Safety and directional signs Electrical ground bonding equipment Basket stretcher c/w spine board, rescue slings and blankets Crown saver 2 self-retracting life lines BOP equipment Class III Shaffer 152mm X 35mpa LWS double gate & shaffer spherical Oilco 4 accumulator station 250 L 21mpa c/w operators controls and N2 backup mounted in skidded combination building 2 -73mm X 35mpa safety valves 89mm rod BOP Kill spool 152mm X 21mpa c/w 50mm X 35mpa wing valve 76mm X 9m swab lubricator c/w sinker bars & tool trap 76mm X 21mpa swabbing valve Pump Skidded heated steel building National JWS340 tripleX 102mm plungers X 127mm stroke John deer 6125H 12.5 L 350 hp engine Eaton 10 speed transmission Mission magnum 127mm X 152mm charge pump 6 – 50mm X 35mpa manifold Mud tank 38m3 two compartment mud tanks c/w stairs railings, mix hopper, mud guns, settling trough, steam coil, lighting & wind flag 120m X 50mm X 35mpa line pipe and suction hose Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. --------------------------------------------------------------------------------------------------------------------------------- Search words (for official use only) - Workover Rigs For Sale Used 4200m SRE 600 Double Workover Rig for Sale SRE 600 Double - 4200m Used Workover Rig for sale Used American Workover Rigs Workover Land Rigs in USA Workover Rig for sale RE 600 Double (4200m) for sale -------------------------------------------------------------------------------------------------------------------------------------
Generic Bucket Style Drilling Rig for Sale Drilling Rig - Generic Bucket Style - For Sale Model : Bucket Style Drill Rig Manufacturer : Generic Condition : Used Description : Bucket Style Drill Rig Detroit Diesel Deck Engine Mounted in a 1984 International 4370 Series truck Tandem Axle Cummins Diesel Truck Engine Note: Bill of sale only (no-title) & Selling "as is, where-is". Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. --------------------------------------------------------------------------------------------------------------------- Search words (for official use only) : Used Generic Bucket Style Drilling Rig for Sale Used Generic Drilling Rig for Sale Generic Land Drilling Rig for Sale Generic Bucket Style Used Drilling Rig for Sale Generic Bucket Style Drilling Rig for Sale in USA -----------------------------------------------------------------------------------------------------------------------
UMD 135 Land Drilling Rig - For Sale in Europe New Semi Mobile Drilling Rig For Sale - UMD 135 Main Technical Specifications Engine type : C 15 ACERT Nominal engine power hp (kW) : 475 (354) Transmission : Allison 4700 OFS Nominal hoisting capacity metric ton (lbs) : 135 (297000) Workover depht (m) drill pipe (2 7/8”) : 5800 Drilling depht (m) (4 1/2“) : 2500 Rope diameter (mm) : 26 Mast height (m) : 32 Drilling floor height (m) : 5 Travelling system : 5x4 Working pressure (mpa) : 0, 65-0, 8 Technical Specifications Engine type : C 15 ACERT Nominal engine power hp (kW) : 475 (354) Transmission : Allison 4700 OFS Nominal hoisting capacity metric ton (lbs) : 135 (297000) Workover depht (m) drill pipe (2 7/8”) : 5800 Drilling depht (m) (4 1/2“) : 2500 Rope diameter (mm) : 26 Mast height (m) : 32 Drilling floor height (m) : 5 Travelling system : 5x4 Working pressure (mpa) : 0, 65-0, 8 Drawworks Main Drum - Input power (hp) : 500 Barrel size : D18” W38” Brake rim size : D44” W12” Wire line size : 1 ” (26 mm) Drum speed : 7F/1R Brake cooling : Water circulation Brake system : Band / disc / auxiliary (Parmac SSR-28 hydro-brake) Lubrication : Automatic or manual Drum clutch : Air flex type Chain drives : All chains are fully encloded for oil bath lubrication ensuring longer life and cleaner operation Sand Line Drum - Barrel size : D13” W37“ Brake rim size : D44” W9½” Spooling capacity : 16114’ Sand line wire size : 9/16” (14 mm) - 5/8” (16 mm) Rig Power & Transmission Diesel engine(s) : Caterpillar C-15 ACERT, 540Hp, 2.100rpm Transmission(s) : ALLISON OFS 4700 series with torque converter Right angle gear box : Min 500 hp gear box in oil bath gear case Compound box : Twin engine drive through transmission includes disconnect clutches at compound shaft for engines Mast & Crown Block Mast - Mast complete set : Design and conform to API 4F specification Mast height : 32m ( 105ft ) Max. static hook load capacity : 1.323kN ( 300.000lbs ) Racking capacity : 2.500m ( 4 ½’’ DP 19.2m double ) Height of the monkey board : 17.2m ( from floor ) Mast type : Hydraulic telescopic Accessories : Two (2) X hydraulic catheads, Two (2) X tong weight boxes, standpipe, exproof lightning....etc Crown Block - Crown block complete set : Design and conform to API 4F specification Max. hook load : 1.323kN (300.000lbs) Number of sheaves : (3) Main + (1) fast line + (1) deadline + (1) sandline + (2) sheaves for service winch Sheaves OD : Fast Lines Ø32" ( Ø813mm ) Dead Line Ø28" ( Ø711mm ) Sand Line Ø28" ( Ø711mm ) Dia. of sheave’s grove : Fast & Dead Lines Ø1" ( Ø26mm ) Sand & Winch Lines Ø 5/8" ( Ø16mm ) Substructure Substructure complete set : Design and conform to API 4F specification Height of substructure substructure : 5m Area of substructure : 40m2 Max. static rotary load : 1.400kN Set back capacity : 700kN BOP lifting tools : 3tons capacity electric or mechanic winches Accessories : Mouse, rat hole, dog house Rotary Table Diameter of opening : 20½" Center of table to centerline of sprocket teeth : 44" Maximum static load, ton : 350 Max speed, rpm : 300 Gear ratio : 3.79 Dimensions (LxWxH), in : 78×56×24 Approximate Weight, lbs : 12,020 Traveling Block & Hook Traveling block : 1.400kN max. statik load, 4 sheaves, Ø32’’ sheaves dia. Ø1’’ (Ø26mm ) groove dia. Hook : 1.400kN max. statik load, 5tons spring stroke. Elevator link(s) : 1.400kN rated load capacity. Swivel Static hook load, ton : 135 Working pressure, psi : 5,000 Maximum speed, rpm : 300 Coupling thread to stem : 4-1/2" Reg LH Coupling thread to kelly : 6-5/8" Reg LH Stem I.D. : 2- 1/2" Trailer & Other Systems Trailer : Three axles semi mobile trailer, 16 wheels, fabricated high tensile steel vehicle frame reinforced at points of greatest stress. Highway equipment and cab included. Installed fuel tank. Tool box. Auxilary drill line drum, all axles dressed brake, folding walkwayss on both sides of trailer. Hydraulic jacks : Four hydraulic operated leveling jacks Hydraulic service winch : 5 metric tons drum pull capacity Deadline anchor : Deadline anchor attached directly to trailer frame Air system : Compressor (engine drive), air tank, relief valves, air dryer, gauges, all clutches Hydraulic system : Hydraulic pump, system operate hydraulic cylinders on mast, hydraulic jacks, hydraulic pipe tong, and hyraulic winch. Control valves, hydraulic oil tank, filters, pipes, hydraulic and air valve connections, fittings. Electrical lighting system : All the electrical equipments on the mast, and substructure are ex-proof type Instrumentation : Driller control panel, weight indicator, gauges, air valves, cables, hoses, fittings, transducers, paint Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. --------------------------------------------------------------------------------------------------------------------------------- Search words(for official use only) : UMD 135 Land Drilling Rig for Sale UMD 135 Semi Mobile Drilling Rig For Sale New Semi Mobile Drilling Rigs New UMD 135 Drilling Rig For Sale in Europe Land Drilling Rigs For Sale -------------------------------------------------------------------------------------------------------------------------------------
Showing 49 to 96 of 605 results
.png)
.png)
.png)
.png)
.jpg)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
Search Here
DrillingRigforSale-11717670352974.jpg "Atlas Copco T4BH (Blasthole) Drilling Rig - For Sale")
DrillingRigforSale-11717670352974.jpg "Atlas Copco T4BH (Blasthole) Drilling Rig - For Sale")
DrillingRigforSale-11717066450102.jpg "Atlas Copco T4BH (Blasthole) Drilling Rig-For Sale")
DrillingRigforSale-11717066450102.jpg "Atlas Copco T4BH (Blasthole) Drilling Rig-For Sale")
