Diedrich Rubber Track Sonic Drilling Rig for Sale Sonic Drilling Rig on Tracks for Sale
Model : Sonic Drill Rig on Tracks Manufacturer : Diedrich Year : 2012 Condition : Used
Description :
2012 Diedrich Rubber Track Sonic Rig Engine : 375hp Volvo Diesel Engine Dimensions : Length towered down – 22’ 5” Length towered up – 21’ 6” Height towered down – 10’ 9” Height towered up – 22’ 7” Width – 8’ Weight – 37,600lbs Feed System : Dual single link chain drive Pull back – 20,000lbs Pull down – 20,000lbs Max speed – 102ft./min Rubber isolation wheels 15ft stroke, with a Gore track hose system Water Pumps : L6 Progressive Cavity Moyno Pump 225 PSI 47 GPM Inlet/Outlet – 3”/ 2-1/2” Jib Winch : Extended Position Capacity – 1700 lbs. Vertical Position (Over the hole) Capacity – 3800 lbs. Breakout Wrenches : 3-1/2” OD Pipe – 11” OD Pipe Torque 17,500 lbs. Mast : 12” x 12” structural tubular construction 25,000 lb. gross load rating 6” guide tubes Leveling Jacks : Four 36” stroke (2 front and 2 rear) Other Features : One 24” tool box 150-gallon fuel tank 200-gallon hydraulic tank Radio controlled under carriage Rod trough Automatic SPT Hammer 10” wiggle and 10” in/out Tooling available cost extra
Note : The majority of drilling projects the rigs now perform is Geotech drilling, Auto-Matic-Trip Hammers were installed on both.
Location : USA
Price & terms : Please enquire using the email form below.
If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you.
We can arrange delivery of equipment and towage of rigs and vessels where needed.
The details mentioned above are believed to be accurate but are not guaranteed.
--------------------------------------------------------------------------------------------------------- Search words (for official use only) : 2012 Built Diedrich Rubber Track Sonic Drilling Rig for Sale Diedrich Rubber Track Sonic Drilling Rig - 2012 Built for Sale Drilling Rig - Diedrich Rubber Track Sonic - For Sale Used Diedrich Rubber Track Sonic Drilling Rig for Sale Diedrich Rubber Track Sonic Drilling Rig for Sale in USA -------------------------------------------------------------------------------------------------------
Atlas Copco / Ingersoll-Rand T4BH Blast Hole Drilling Rig for Sale Drilling Rig - Atlas Copco T4BH Blast Hole - For Sale
Model : T4BH Blast Hole Drill Rig Manufacturer : Atlas Copco Year : 2006 Condition : Used
2006 Atlas Copco / Ingersoll-Rand T4BH Blast Hole Drill Rig
Mounted on a CCC (Crane Carrier Chassis) Truck VIN: 1CYDCH4836T047052 No Title - Bill of Sale Only
Power & Drivetrain : Cummins QSX15 Diesel Deck Engine Remanufactured 8-10-26 Rated 530 HP @ 1,800 RPM Caterpillar C11 Diesel Carrier Engine
Compressor & Drilling Package : Ingersoll-Rand HR2 Air Compressor 900 CFM/ 350 PSI @ 1,800 RPM Compressor New In 2015 2 Motor Spur Gear Rotary Power Head 37,500 Lb Pullback Capacity 1010 Cat Water Injection System Large Hammer Lubricator Dust Collector System
Pipe Handling : 5 Rod Carousel Set up for 4” O.D. x 25’ Drill Pipe Note : Can be converted to T4W or T4W DH for water well drilling projects
------------------------------------------------------------------------------------------------------------------- Search words (for official use only) : 2006 Built Atlas Copco T4BH Blast Hole Drilling Rig for Sale Atlas Copco T4BH Blast Hole Drilling Rig - 2006 Built for Sale Used Atlas Copco / Ingersoll-Rand T4BH Blast Hole Drill Rig for Sale Atlas Copco Drilling Rig for Sale Atlas Copco / Ingersoll-Rand T4BH Blast Hole Drilling Rig for Sale in USA ---------------------------------------------------------------------------------------------------------------------
Ingersoll-Rand T4BH Blast Hole Drilling Rig for Sale Drilling Rig - Ingersoll-Rand T4BH - For Sale
Model : T4BH Blast Hole Drill Rig Manufacturer : Ingersoll-Rand Year : 1997 Condition : Used
1997 Atlas Copco / Ingersoll-Rand T4BH Blast Hole Drill Rig Mounted on CCC (Crane Carrier Chassis) Truck No Title - Bill of Sale Only
Power & Drivetrain : Cummins N14 Diesel Engine
Drilling Package : No Air Compressor on board 2 Motor Spur Gear Rotary Power Head 37,500 LB. Pullback Capacity 2 Piston Bean Water Injection Pump Venturi Hammer Lubricator Dust Collector System
Pipe Handling : 5 Rod Carousel Set up for 4-1/2” O.D. x 25’ Drill Pipe
Note : Can be converted to T4W or T4W DH for water well drilling projects
--------------------------------------------------------------------------------------------------------- Search words (for official use only) : 1997 Built Ingersoll-Rand T4BH Blast Hole Drilling Rig for Sale Ingersoll-Rand T4BH Blast Hole Drilling Rig - 1997 Built for Sale Used Ingersoll-Rand T4BH Blast Hole Drilling Rig for Sale Ingersoll-Rand Drilling Rig for Sale Ingersoll-Rand T4BH Blast Hole Drilling Rig for Sale in USA -------------------------------------------------------------------------------------------------------
Ingersoll-Rand T4BH Blast Hole Drilling Rig for Sale Drilling Rig - Ingersoll-Rand T4BH Blast Hole - For Sale
Model : T4BH Blast Hole Drill Rig Manufacturer : Ingersoll-Rand Year : 2004 Condition : Used
2004 Atlas Copco / Ingersoll-Rand T4BH Blast Hole Drill Rig
Mounted on CCC (Crane Carrier Chassis) Truck VIN: 1CYDCC4824T046278 No Title - Bill of Sale Only
Power & Drivetrain : Cummins QSX15 Diesel Deck Engine Rated 530 HP @ 1,800 RPM Cummins Reman installed July 2022 Caterpillar C10 Carrier Engine S/N: MBJ03313
Compressor & Drilling Package : Ingersoll-Rand HR2 Air Compressor 900 CFM / 350 PSI @ 1,800 RPM 2 Motor Spur Gear Rotary Power Head 37,500 lb. Pullback Capacity 1010 CAT Water Injection System Large Hammer Lubricator Dust Collector System
Pipe Handling : 7 Rod Carousel Set up for 4-1/2” O.D. x 25’ Drill Pipe
Note: Can be converted to T4W or T4W DH for water well drilling projects
---------------------------------------------------------------------------------------------------------------------------------- Search words (for official use only) : 2004 Built Ingersoll-Rand T4BH Blast Hole Drilling Rig for Sale Ingersoll-Rand T4BH Blast Hole Drilling Rig - 2004 Built for Sale Used Ingersoll-Rand T4BH Blast Hole Drilling Rig for Sale Ingersoll-Rand Drilling Rig for Sale Ingersoll-Rand T4BH Blast Hole Drilling Rig for Sale in USA ---------------------------------------------------------------------------------------------------------------------------------
Furukawa DCR 22 Drilling Rig for Sale 2022 Built Furukawa DCR 22 Drilling Rig for Sale
Model : DCR 22 Drill Rig Manufacturer : Furukawa Year : 2022 Condition : Used
2022 DCR 22 Drill Rig 7,233+ Hours Caterpillar C13 Diesel Engine 963 CFM / 360 PSI Air Compressor CMI 3-Axis Angle Indicator Rear Bumper Package 70-Gallon Water Injection System Fuel Cooler
Rig : Configured for 4" Drill Steel 2-7/8" Regular (REG) Thread Connection
Performance : High-Pressure 963 cfm / 360 psi Air Compressor Package Provides Excellent Performance in Challenging Drilling Conditions CMI 3-Axis Angle Indicator Allows Precise Angle Drilling and Improved Borehole Accuracy Water Injection System Helps Control Dust and Improve Hammer Performance
--------------------------------------------------------------------------------------------------------- Search words (for official use only) : Furukawa DCR 22 Drilling Rig - 2022 Built - For Sale Used Furukawa DCR 22 Drilling Rig for Sale Furukawa DCR 22 Used Drilling Rig for Sale Drilling Rig - Furukawa DCR 22 for Sale Furukawa DCR 22 Drilling Rig for Sale in USA -------------------------------------------------------------------------------------------------------
Generic MPP P1 Exploration Drilling Rig for Sale Drilling Rig - Generic MPP P1 - For Sale
Model : MPP P1 Exploration Drill Rig Manufacturer : Generic Year : 2018 Condition : Used
2018 Multi-Powered Products MPP P1 Exploration Drill Rig
Commissioned In 2020 Powered By John Deere 6135HF485 Diesel Engine Rated 500 HP Approximately 2,000 Engine Hours Eberspacher D5 Engine Heater Sullair Air Compressor 750 CFM @ 500 PSI (Actual)
Drilling Capacity : Rated Depth Capacity : 1,000 Ft (300 M) Using 4.5" Drill Rod Capacity Dependent on Ground Conditions and Formation Characteristics
Top Drive Package : RAB Configuration to Run 2-7/8" RC Drill Rods
Mast & Feed System : Cable-Over-Hydraulic Feed System 23,000 Lbs. Pullback 16,500 Lbs. Pulldown 45°–90° Working Angle Package
Track Package : Mounted On CAT 320L Long Track Undercarriage Top Speed 3.5 MPH 46,000 Lbs. Drawbar
Hydraulic System : Full Hydraulic Operation No Electrical Control System Maximum Hydraulic Flow : 165 GPM
Additional Accessories : Mounted Miller 185DX Welding Unit Includes Two 25-Foot Cables Blade Box 500 Feet Of 2-7/8" Recon Drill Rods (2) 4" DTH Hammers, Bits and Tooling
Location : Western Region, North America
--------------------------------------------------------------------------------------------------------- Search words (for official use only) : 2018 Built Generic MPP P1 Exploration Drilling Rig for Sale Generic MPP P1 Exploration Drilling Rig - 2018 Built for Sale Used Generic MPP P1 Exploration Drilling Rig for Sale Generic Exploration Drilling Rig for Sale Generic MPP P1 Exploration Drilling Rig for Sale in North America -------------------------------------------------------------------------------------------------------
Generic Drilling Rig for Sale Generic HM-38 - Foundation / Caisson Drilling Rig for Sale
Model : HM-38 - Foundation / Caisson Drill Rig Manufacturer : Generic Condition : Used
Highway Manufacturing HM-38 Drill Rig
Cummins 4-Cylinder Diesel Engine Rotating Deck Slide-On Mount Configuration
--------------------------------------------------------------------------------------------------------- Search words (for official use only) : Used Generic HM-38 - Foundation / Caisson Drilling Rig for Sale Generic HM-38 - Used Caisson Drilling Rig for Sale Generic HM-38 Caisson Drilling Rig for Sale Generic HM-38 - Foundation Drilling Rig for Sale Generic HM-38 - Foundation / Caisson Drilling Rig for Sale in USA ----------------------------------------------------------------------------------------------------------
Acker AD-II Drilling Rig for Sale Drilling Rig - Acker AD-II - For Sale
Model : AD-II Drill Rig Manufacturer : Acker Condition : Used
2002 Acker AD-II Drill Rig High-torque for augering and high RPM for coring. Slide Base Control Panel Hydraulic Leveling Jacks Main Drum Hoist / Wireline Hoist / Auxiliary Winch Cathead Water Pump Mounted on International 4900 Truck Diesel Engine Believe right angle drive or gearbox recently rebuilt, drill is in good working order.
------------------------------------------------------------------------------------------------------ Search words (for official use only) : 2002 Acker AD-II Drilling Rig for Sale Used Acker AD-II Drilling Rig for Sale Acker AD-II Used Drilling Rig for Sale Acker Drilling Rig for Sale Acker AD-II Drilling Rig for Sale in USA -------------------------------------------------------------------------------------------------------
Mobile B50 Top Head Drive Drilling Rig for Sale Drilling Rig - Mobile B50 Top Head - For Sale
Model : B50 Top Head Drill Rig Manufacturer : Mobile Condition : Used
Mobile B50 Top Head Drive Drill Rig Simco-style top head Approximately 10 ft. stroke Winch Cathead Deck Engine Mounted on truck
--------------------------------------------------------------------------------------------------------- Search words (for official use only) : Used Mobile B50 Top Head Drive Drilling Rig for Sale Mobile B50 Top Head Drive Used Drilling Rig for Sale Mobile B50 Top Head Drilling Rig for Sale Mobile Drilling Rig for Sale Mobile B50 Top Head Drive Drilling Rig for Sale in USA -------------------------------------------------------------------------------------------------------
Mobile B53 Auger Drilling Rig for Sale Drilling Rig - B53 Auger - For Sale Model : B53 Auger Drill Rig Manufacturer : Mobile Year : 1990 Condition : Used
1990 Mobile B53 Auger Drill Rig Mounted on a Gemco GT300 4x4 skidder Detroit 453 Diesel Engine Auger racks 10' side rack 60 gallon water tank Winch on front Cathead( though we never used it) 140lb Safety Slide Hammer Setup for 6-1/4" Augers
--------------------------------------------------------------------------------------------------------- Search words (for official use only) : 1990 Built Mobile B53 Auger Drilling Rig for Sale Mobile B53 Auger Drilling Rig - 1990 Built for Sale Used Mobile B53 Auger Drilling Rig for Sale Mobile B53 Auger Used Drilling Rig for Sale Mobile B53 Auger Drilling Rig for Sale in USA -------------------------------------------------------------------------------------------------------
Reedrill / Texoma 900 Auger Drilling Rig for Sale Drilling Rig - Reedrill / Texoma 900 Auger - For Sale
Model : Texoma 900 Auger Drill Rig Manufacturer : Reedrill Year : 1987 Condition : Used
1987 Reedrill / Texoma 900 Auger Drill Rig Maximum Hole Diameter : 96" Maximum Hole Depth : 100" Kelly Bar Mounted on a Hendrickson Carrier with 4 axles Powered by a Diesel Engine 4 speed Transmission Hydraulic System 6-1/2" Hoist Cylinder Stabilizer Jacks
Tooling Included : 48" Bucket 46" Auger 24" Core Barrel 36" Bucket 18" Auger 12" Core Barrel 8' Auger 5' Auger 14" Auger 9" Auger 3' Auger 3' Auger 2' Well Busket 6" Auger
--------------------------------------------------------------------------------------------------------- Search words (for official use only) : 1987 Built Reedrill / Texoma 900 Auger Drilling Rig for Sale Reedrill / Texoma 900 Auger Drilling Rig - 1987 Built for Sale Used Reedrill / Texoma 900 Auger Drilling Rig for Sale Reedrill / Texoma 900 Auger Used Drilling Rig for Sale Reedrill / Texoma 900 Auger Drilling Rig for Sale in USA -------------------------------------------------------------------------------------------------------
Generic Badger 1250 Drilling Rig for Sale Drilling Rig - Generic Badger 1250 - For Sale
Model : 1250 Drill Rig Manufacturer : Generic Year : 1995 Condition : Used
Badger 1250 Drill Rig Gardner Denver 427 Air Compressor Failing 5x6 Mud Pump 1250 Drawworks Bean Water Injection Pump 2003-1 DSM Table 2 Leveling Jacks 5 Speed Rotary Transmission Mounted on a 1995 Ford AeroMax Truck CAT 3406 Diesel Engine 8LL Transmission Mechanical Clutches Spicer 792 Transfer Case
--------------------------------------------------------------------------------------------------------- Search words (for official use only) : 1995 Built Generic Badger 1250 Drilling Rig for Sale Generic Badger 1250 Drilling Rig - 1995 Built for Sale Used Generic Badger 1250 Drilling Rig for Sale Generic Badger 1250 Used Drilling Rig for Sale Generic Badger 1250 Drilling Rig for Sale in USA -------------------------------------------------------------------------------------------------------
Joy Rotary Table Core Drilling Rig for Sale Drilling Rig - Joy Rotary Table - For Sale
Model : Rotary Table Core Drill Rig Manufacturer : Joy Condition : Used
Joy Rotary Table Core Drill Rig 6 cylinder Ford 292 engine to run hydraulics Wisconsin gas engine runs triplex mud pump Mounted on a Chevy truck 292 6 cylinder Engine 600' ft. of 10’ drill pipe included Hydraulic cylinder to extended mast and hydraulics Winch to pull mast and tooling with diamond core barrels bits, etc.
--------------------------------------------------------------------------------------------------------- Search words (for official use only) : Used Joy Rotary Table Core Drilling Rig for Sale Joy Rotary Table Core Used Drilling Rig for Sale Rotary Table Core Drilling Rig for Sale Joy Rotary Table Core Land Drilling Rig for Sale Joy Rotary Table Core Drilling Rig for Sale in USA -------------------------------------------------------------------------------------------------------
Ingersoll-Rand T4W DH Drilling Rig for Sale 1998 Built Ingersoll-Rand T4W DH Drilling Rig for Sale
Model : T4W DH Drill Rig Manufacturer : Ingersoll-Rand Year : 1998 Condition : Used
1998 Ingersoll-Rand T4W DH Drill Rig Worm Gear Power Head Upgraded with DH Deep-Hole Package - rated 70,000-lb pullback
Ingersoll-Rand HR2.5 Air Compressor – 1,250 CFM / 350 PSI Good Working Order Includes New Shaft Seal
Cummins QSK19C Diesel Deck Engine – rated 700 HP Factory Reman (500 Hours Since)
New Funk Box (Pump Drive) Hydraulic Pumps & Motors Rebuilt (about 600–700 Hours Ago)
Major Recent Upgrades Include : New Clutch on Crane Carrier New Chains New Power Divider Differential Rebuilt Walking Beam Suspensions Newer Tires New Compressor-To-Engine Coupling Remanufactured Top Drive
Braden 8,000-Lb Winch Hammer Oiler 25 GPM @ 500 PSI Water Injection Pump
Rod Handling Package : 7-Rod Carousel 4-Rod Lazy-Susan-Style Rack Includes 275' Ft. of Drill Pip (25’ x 4-1/2” OD X 3-1/2” API Reg Pipe)
14,000 Hours Since New Well maintained with extensive upgrades Ready to work Includes spare parts & basic tooling Mounted on a CCC (Crane Company Carrier) Truck Cummins M11 Diesel Engine - rated 350 HP with 52,747 miles & 3,069 Hours
Optional Equipment Available at Additional Cost : Additional 2,000' ft of drill pipe (2) 4-1/2" x 25' Drill collars Sub adapters & (2) Stabilizer (25' x 4-1/2") & (2) 6-1/2" 7" & 8" & 12" Diverters - $ (2) Symmetrix system (7” & 10-3/4”) More
--------------------------------------------------------------------------------------------------------- Search words (for official use only) : Drilling Rig - Ingersoll-Rand T4W DH - For Sale Ingersoll-Rand T4W DH Drilling Rig - 1998 Built for Sale Used Ingersoll-Rand T4W DH Drilling Rig for Sale Ingersoll-Rand T4W DH Used Drilling Rig for Sale Ingersoll-Rand T4W DH Drilling Rig for Sale in USA -------------------------------------------------------------------------------------------------------
Furukawa HCR 900 ESV Drilling Rig for Sale Drilling Rig - Furukawa HCR 900 ESV - For Sale
Model : HCR 900 ESV Drill Rig Manufacturer : Furukawa Year : 2023 Condition : Used
2023 Furukawa HCR 900 ESV Drill Rig
Machine Hours : 1,826 Drifter Hours : 737.5
Engine : Cummins QSB 6.7 Diesel
Drilling Setup : Drifter : HD 818 T45 Drill Steel
Service : NEW Air End Installed: 3/25/2026 at 1,826 hours
--------------------------------------------------------------------------------------------------------- Search words (for official use only) : 2023 Built Furukawa HCR 900 ESV Drilling Rig for Sale Furukawa HCR 900 ESV Drilling Rig - 2023 Built for Sale Used Furukawa HCR 900 ESV Drilling Rig for Sale Furukawa HCR 900 ESV Used Drilling Rig for Sale Furukawa HCR 900 ESV Drilling Rig for Sale in USA -------------------------------------------------------------------------------------------------------
Mudslayer Odin 200 Drilling Rig for Sale Drilling Rig - Mudslayer Odin 200 - For Sale
Model : Odin 200 Drill Rig Manufacturer : Mudslayer Year : 2025 Condition : Used
2025 Mudslayer Odin 200 Drill Rig
Includes the following : 200’ 2-3/8" drill pipe 4.5” API sub 50 Gallon Groutslayer Grouter 500 Gallon Mudslayer Mud System Equipped with (3) 5” Desanding Cones and Mudslayer Shaker Deck Telescoping Drill Mast. 25’ Under Crown Houston Machine 2000 Rotary Head with 7000# Pull Back 74 Hp Hatz Diesel NO DEF Less Than 100 Hours on The Machine 3 ×4 × 8.5 Downhole Pump 118 Series 2000# Sand Line- 200’ Weighs 9500# Perfect for Tight Areas All Tools and Accessories Needed to Start Drilling Immediately Clean, Well-Maintained, And Fully Work-Ready Perfect For Water Well Drilling, Monitoring Wells, Geothermal, And Test Holes. Great For Anyone Looking to Expand Operations or Add a Reliable, Low-Hour Rig. Could Use as A Primary Mud Machine and Back Up Drill This Rig Is Ready to Go to Work Today (per the seller)
--------------------------------------------------------------------------------------------------------- Search words (for official use only) : 2025 Built Mudslayer Odin 200 Drilling Rig for Sale Mudslayer Odin 200 Drilling Rig - 2025 Built for Sale Used Mudslayer Odin 200 Drilling Rig for Sale Mudslayer Odin 200 Used Drilling Rig for Sale Mudslayer Odin 200 Drilling Rig for Sale in USA -------------------------------------------------------------------------------------------------------
Gefco 40k Drilling Rig for Sale Drilling Rig - Gefco 40k - For Sale
Model : 40K Drill Rig Manufacturer : Gefco Year : 2020 Condition : Used
2020 Gefco 40k Drill Rig
Sullair 1000 cfm / 350 psi Air Compressor (455 hours) Centrifugal 4x3 Mud Pump Mounted On a 2020 Peterbilt Paccar Truck Cummins Diesel Engine - rated 565 HP - Tier IV Emission 3975 Miles & 2,835 Hours CVWR 23,000 / 68,000 lbs Note : Divertech diverted cost extra
--------------------------------------------------------------------------------------------------------- Search words (for official use only) : 2020 Built Gefco 40k Drilling Rig for Sale Gefco 40k Drilling Rig - 2020 Built for Sale Used Gefco 40k Drilling Rig for Sale Gefco 40k Used Drilling Rig for Sale Gefco 40k Drilling Rig for Sale in USA -------------------------------------------------------------------------------------------------------
Furukawa HCR 900 ESV Drilling Rig for Sale Drilling Rig - HCR 900 ESV - For Sale
Model : HCR 900 ESV Drill Rig Manufacturer : Furukawa Year : 2025 Condition : Used
2025 Furukawa HCR 900 ESV Drill Rig
Key Specs : Serial Number : 1760600063 Machine Hours : 816.5 Drifter Hours : 288.5 35 Gallon Water Injection System
Engine : Powered by Cummins QSB 6.7 Diesel Engine
Drilling Setup : T45 Drill Steel Setup HD 818 Drifter
--------------------------------------------------------------------------------------------------------- Search words (for official use only) : 2025 Built Furukawa HCR 900 ESV Drilling Rig for Sale Furukawa HCR 900 ESV Drilling Rig - 2025 Built for Sale Used Furukawa HCR 900 ESV Drilling Rig for Sale Furukawa HCR 900 ESV Drilling Rig for Sale Furukawa HCR 900 ESV Drilling Rig for Sale in USA --------------------------------------------------------------------------------------------------------
Ingersoll-Rand T4W LT Long Tower Drilling Rig for Sale Ingersoll-Rand T4W LT Long Tower Drilling Rig - 1987 Built Model : T4W LT Long Tower Drill Rig Manufacturer : Ingersoll-Rand Year : 1987 Condition : Used Description : 1987 Ingersoll-Rand T4W LT Long Tower Drill Rig Cummins KT19 Diesel Deck Engine IR HR2 900 cfm / 350 psi Air Compressor - SN: 83432U07S2 One Main P7 Hydraulic Pump Keystone Hammer Lubricator Cat 2520 Water Injection Pump Rotary Head Rebuilt (we will install) Hydraulic Leveling Jacks Mounted on a Hendrickson Carrier Truck - VIN#: 11HCD6480GLZ16600 RTO-6613 Transmission Detroit 671 In Line Diesel Engine 10:00-20 Tires Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. -------------------------------------------------------------------------------------------------------------------------------------- Search words (for official use only) : 1987 Built Ingersoll-Rand T4W LT Long Tower Drilling Rig for Sale Used Ingersoll-Rand T4W LT Long Tower Drilling Rig for Sale Drilling Rig - Ingersoll-Rand T4W LT Long Tower for Sale Ingersoll-Rand T4W LT Long Tower Used Land Drilling Rig for Sale Ingersoll-Rand T4W LT Long Tower Drilling Rig for Sale in USA ------------------------------------------------------------------------------------------------------------------------------------------
Schramm T555 Drilling Rig for Sale Drilling Rig - Schramm T555 - For Sale
Model : T555 Drill Rig Manufacturer : Schramm Year : 2004 Condition : Used
2004 Schramm T555 Drill Rig Sullair 1050 CFM / 350 PSI Air Compressor Torque : 75,348 in-lbs. @ 0–131 RPM Pullback : 40,000 lbs. Pulldown : 30,000 lbs. CAT C-15 Diesel Deck Engine (565 HP) Meter : 10,445 hours Outfitted with : Engine Preheater FMC Bean Water Injection Pump Pipe Trough 300 ft. Of Drill Pipe Stabilizer DTH hammer Table Bushings
Mounted on 2004 Sterling Truck 29,972 Miles Powered by 450 HP Mercedes Benz Diesel Engine Drill Starts and Runs Well – Good Working Condition (per seller)
--------------------------------------------------------------------------------------------------------- Search words (for official use only) : Schramm T555 Drilling Rig - 2004 Built - For Sale 2004 Built Schramm T555 Drilling Rig for Sale Used Schramm T555 Drilling Rig for Sale Schramm T555 Used Drilling Rig for Sale Schramm T555 Drilling Rig for Sale in USA -------------------------------------------------------------------------------------------------------
Chicago Pneumatic T650WS Drilling Rig for Sale Drilling Rig - Chicago Pneumatic T650WS - For Sale
Model : T650WS Drill Rig Manufacturer : Chicago Pneumatic Year : 1981 Condition : Used
1981 Chicago Pneumatic T650WS Drill Rig Cat 3406A Diesel Deck Engine (Bad Exhaust Manifold Leak on Head) GHH 825 cfm / 300 psi Air Compressor 6-Rod Carousel 2-Piston Bean Water Injection Pump 4-Hole Funk Box Swinging Jib Boom 300 ft of 4 ½" x 20 ft Drill Pipe, 3 ½ API thread 6" Hammer Basic Tools Included Hoses In Fair Condition
Mounted on 2003 Mack DM690S Truck : VIN: 1M2B209C13M029337 Maxitorque 8-Speed Transmission Double Frame
--------------------------------------------------------------------------------------------------------- Search words (for official use only) : Chicago Pneumatic T650WS Drilling Rig - 1981 Built - For Sale 1981 Built Chicago Pneumatic T650WS Drilling Rig for Sale Used Chicago Pneumatic T650WS Drilling Rig for Sale Chicago Pneumatic T650WS Used Drilling Rig for Sale Chicago Pneumatic T650WS Drilling Rig for Sale in USA -------------------------------------------------------------------------------------------------------
Keystone 50 Cable Tool Drilling Rig for Sale Cable Tool Drilling Rig - Keystone 50 - For Sale
Model : 50 Cable Tool Rig Manufacturer : Keystone Condition : Used
Keystone 50 Cable Tool Drill Rig Red Seal Gas Engine Custom Fitted with Extra Casing Reel Hydraulic Controls Hydraulic Leveling Jacks Tool Guide Drill Stem Rope Socket
Has Been Parked for a Long Time – Can Be Sold As-Is or Repaired/Refurbished (Extra Cost)
Mounted On International Tandem-Axle Truck (Can Be Sold with or Without Truck)
--------------------------------------------------------------------------------------------------------- Search words (for official use only) : Used Keystone 50 Cable Tool Drilling Rig for Sale Keystone 50 Cable Tool Used Drilling Rig for Sale Keystone Drilling Rig for Sale Keystone Cable Tool Drilling Rig for Sale Keystone 50 Cable Tool Drilling Rig for Sale in USA -------------------------------------------------------------------------------------------------------
Schramm T685H Drilling Rig for Sale Schramm T685H Drilling Rig - 1982 Built for Sale
Model : T685H Drill Rig Manufacturer : Schramm Year : 1982 Condition : Used
1982 Schramm T685H Drill Rig Detroit 12V71 Twin Turbo Diesel Deck Engine - S/N: 7123-7030 Schramm 850 cfm / 350 psi Air Compressor DH with 70,000 lbs of pullback Top head motor & a winch were rebuilt Includes 725' Ft Of 25' X 4-1/2" X 3-1/2" API Drill Pipe, lots of Tooling, Parts, Manuals Hydraulic Leveling Jacks (front leaks & 1 rear leaks) Rebuilt - Branden PD12 winch 12,000 lbs Mounted on a GMC Truck Detroit Diesel Engine
--------------------------------------------------------------------------------------------------------- Search words (for official use only) : 1982 Built Schramm T685H Drilling Rig for Sale Drilling Rig - Schramm T685H - For Sale Used Schramm T685H Drilling Rig for Sale Schramm T685H Used Drilling Rig for Sale Schramm T685H Drilling Rig for Sale in USA -------------------------------------------------------------------------------------------------------
Atlas Copco T3W Drilling Rig for Sale Atlas Copco T3W Drilling Rig - 2009 Built - For Sale
Model : T3W Drill Rig Manufacturer : Atlas Copco Year : 2009 Condition : Used
2009 Atlas Copco T3W Drill Rig S/N: 21307 Caterpillar C15 Diesel Deck Engine Ingersoll-Rand HR2.5 900 CFM / 350 PSI Air Compressor Rated 40,000 lb. Pullback Capacity 3x4 Centrifugal Mud Pump, Hydraulic Powered 7-Gallon Hammer Lubricator 18 GPM, 4-Piston Bean Water Injection Pump 9-Rod Carousel with Single Arm Rod Loader 18,000 lb. Drawworks with Dual Controls Includes 600' ft of Drill Pipe (20 ft x 3-1/2" OD x 2-3/8" IF Threads) Mounted on 2009 International WorkStar 7600 Truck Caterpillar C13 Engine with Jake Brake Front Tires : 425/65R22.5 Rear Tires : 11R22.5 VIN: 1HTWXSBTX95090452 Hendrickson Suspension with Locking Rear Differential
--------------------------------------------------------------------------------------------------------- Search words (for official use only) : Drilling Rig - Atlas Copco T3W for Sale 2009 Built Atlas Copco T3W Drilling Rig for Sale Used Atlas Copco T3W Drilling Rig for Sale Atlas Copco T3W Used Drilling Rig for Sale Atlas Copco T3W Drilling Rig for Sale in USA -------------------------------------------------------------------------------------------------------
Generic Longyear 44 Wireline Core Drilling Rig for Sale Generic Longyear 44 Wireline Core Drilling Rig - 1977 Built - For Sale
Model : Longyear 44 Core Drill Manufacturer : Generic Year : 1977 Condition : Used
1977 Longyear 44 Wireline Core Drill Long mast with overhead platform for running 30 ft. rods 6 Cylinder Listers Peters Engine Deutz 2 Cylinder 435 Water Pump Mounted on a 1977 Ford 700 Truck with 13,152 Miles Leveling jacks Has the 2nd cable for deep hole work Note : Previous operator has been down to 5438' ft. BQ wireline drilling Lister Peters engine (runs smooth but the shut off solenoid doesn’t work so you need to push lever manually to power down) Truck tires may need replaced Note : Other than that, drill is in working order, just needs fuel and battery then ready to go back to work right away
Also add to description of each drill a list of items available at extra cost : 3000' ft. BQ wireline drill rods 1000' ft. of NQ composite (NQC) drill rods Bean 435 water pumps Joy 22 parts Brake bands for Joy drills and Sprague & Henwood drills Hydraulic Chuck cylinders for Longyear 44’s Joy Transmission BQ core barrels
Also add that seller has following available at extra cost : 142C Sprague & Henwood 24" feed 3 Cylinder Deutz 912 New Rebuild 2 Bean 20 pumps Sprague & Henwood 30" feed Acker automatic chuck up to NQ Gardner Denver water pump '93 Volvo 13 speed with air brakes has 1000 gallon water tank. Location : USA
--------------------------------------------------------------------------------------------------------- Search words (for official use only) : Used Longyear 44 Wireline Core Drilling Rig for Sale 1977 Built Generic Longyear 44 Wireline Core Drilling Rig for Sale Generic Longyear 44 Wireline Used Core Drilling Rig for Sale Generic Longyear 44 Wireline Core Drill Rig for Sale Longyear 44 Wireline Core Drilling Rig for Sale in USA -------------------------------------------------------------------------------------------------------
Reichdrill 650 Drilling Rig for Sale Drilling Rig - Reichdrill 650 - For Sale
Model : 650 Drill Rig Manufacturer : Reichdrill Year : 1995 Condition : Used
Mid 1990s Reichdrill 650 Drill Rig Sullair 900 cfm / 350 psi Air Compressor CAT 3406C Diesel Engine Mounted on a metal track carrier Note : Can remove from track carrier and mount it on a truck if converting to a T650 water well drilling rig
--------------------------------------------------------------------------------------------------------- Search words (for official use only) : 1995 Built Reichdrill 650 Drilling Rig for Sale Reichdrill 650 Drilling Rig - 1995 Built for Sale Used Reichdrill 650 Drilling Rig for Sale Reichdrill 650 Used Drilling Rig for Sale Reichdrill 650 Drilling Rig for Sale in USA -------------------------------------------------------------------------------------------------------
Atlas Copco Boomer L2C Drilling Rig for Sale Used Atlas Copco Boomer L2C Drilling Rig for Sale Model : Boomer L2C Drill Rig Manufacturer : Atlas Copco Condition : Used Description : Atlas Copco Boomer L2C Drill Rig Diesel Motor 2013 L042V Deutz Transmission Dana Spicer Series AVO11D254E Front Differential Dana Spicer Series AVO11D214E Rear Differential Dana Spicer Series NBEA378017 Last registry of hours : August 2018 Hours on the Diesel Motor : 1,017 Hours Arm 1 = 154 Hours on Electric Motor Arm 2 = 157 Hours on Electric Motor Location : Northern Mexico Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. --------------------------------------------------------------------------------------------------------------------- Search words (for official use only) : Drilling Rig - Atlas Copco Boomer L2C - For Sale Atlas Copco Boomer L2C Used Drilling Rig for Sale Atlas Copco Boomer Drilling Rig for Sale Atlas Copco Boomer L2C Drilling Rig for Sale in Northern Mexico Atlas Copco Boomer L2C Land Drilling Rig for Sale --------------------------------------------------------------------------------------------------------------------------------------
Atlas Copco RD20 Range III Drilling Rig for Sale Drilling Rig - Atlas Copco RD20 Range III - For Sale Model : RD20 Range III Drill Rig Manufacturer : Atlas Copco Year : 2006 Condition : Used Description : 2006 Atlas Copco RD20 Range III Drill Rig - S/N-21013 IR 1250 cfm / 350 psi Air Compressor with In & Out box Cummins QSK-19 Diesel Deck Engine (7187 Hours since rebuilt around 2022) 120,000 lbs of Pullback Bean Triplex Mist Pump 17-1/2" Table Opening Mounted on a CCC (Crane Carrier Company) 5-Axle Carrier - VIN#:1CYDGV5806T047236 CAT C13 Diesel Engine FULLER 8-Speed Transmission (5) Hydraulic Leveling Jacks 425/65R22.5 Front & 11R-22.5 Rear Tires Base Beams Main Hydraulic pump rebuilt in 2022
Note : No carousel
Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. -------------------------------------------------------------------------------------------------------------------------- Search words (for official use only) : 2006 Built Atlas Copco RD20 Range III Drilling Rig for Sale Atlas Copco RD20 Range III Drilling Rig - 2006 Built for Sale Used Atlas Copco RD20 Range III Drilling Rig for Sale Atlas Copco Used Drilling Rig for Sale Atlas Copco RD20 Range III Drilling Rig for Sale in USA --------------------------------------------------------------------------------------------------------------------------
Mobile B61 Drilling Rig For Sale Drilling Rig - Mobile B61 - For Sale Model : B61 Drill Rig Manufacturer : Mobile Condition : Used Description : Mobile B61 Drill Rig - S/N: 620237 Tulsa Winch Moyno-type pump King Swivel Hydraulic Spool Valve Controls Drilling Capacities : Rotary Drilling with 2-5/8” diameter drill rod…… 1350 ft. (410 m) (new drill rod can be purchased at an additional cost) Core Drilling with AW size tools or AQ wire line… 2250 ft. (685 m). Core Drilling with NW size tools or NQ wire line… 1350 ft. (410 m). Continuous Flight-Auger Diameter Range…... up to 14” (355 mm). Max. Depth with 6” Dia. (152.4 mm) Augers. 360 ft. (110 m). Max. Depth with 8” Dia. (203.2 mm) Augers. 250 ft. (76.2m). Note: Drilling Capacities are based on maximum depths obtained in actual field test and will vary with local subsurface conditions. Mounted on an International Loadstar truck Gas engine Winch on front Showing 3865 miles Leveling Jacks Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. --------------------------------------------------------------------------------------------------------- Search words (for official use only) : Used Mobile B61 Drilling Rig For Sale Mobile B61 Used Land Drilling Rig For Sale Mobile Drilling Rig For Sale Mobile B61 Drilling Rig For Sale in USA Used Mobile B61 Drilling Rig For Sale in USA -----------------------------------------------------------------------------------------------------------
Hydraulic Crawler Drill Rig and Air Compressor for Sale Generic Hydraulic Crawler Drilling Rig for Sale Model : Hydraulic Crawler Drill Rig & KSZJ 18/17 Air Compressor Manufacturer : Generic Condition : Used Description : Hydraulic Crawler Drill Rig and Air Compressor KW180 Hydraulic Crawler Mounted Drill Rig 168 Hours Max Pull 12t / Max Push 4.5t Top Drive with 2-3/8" Reg Box Connection Has a 10ft Foot Stroke 2020 Kaishan KSZJ 18/17 Air Compressor Yuchai (Cummins) Diesel Powered Dual Screw Air End 168 Hours 635 CFM @ 250 PSI 180m 3" Drill Rods in 10ft Lengths, 2 3/8" Reg Connections 1x New 7" Step Bit 1x New 4" Step Bit Location : Canada Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. ------------------------------------------------------------------------------------------------------------------------------- Search words (for official use only) : Generic Hydraulic Crawler Drill Rig and Air Compressor for Sale Generic Used Hydraulic Crawler Drilling Rig and Air Compressor Used Hydraulic Crawler Drilling Rig for Sale Used Generic Hydraulic Crawler Drilling Rig for Sale Generic Air Compressor for Sale ---------------------------------------------------------------------------------------------------------------------------------
Schramm T660 Drilling Rig for Sale Drilling Rig - Schramm T660 Rotadrill - For Sale
Model : T660 Drill Rig Manufacturer : Schramm Year : 1986 Condition : Used
1986 T660 Rotadrill Rig : GHH 750 cfm / 250 psi Air Compressor Detroit 8V92 Diesel Deck Engine Cat Water Injection System Set Up as Top Head Air Rotary Drill Rig Carousel System Hammer Oilier 4,131 Hours on Rig
Includes Drill Pipe : 7 Pieces of Carousel Drill Pipe 4-1/2” Drill Pipe 220' Ft Bottle Neck 80' Ft Flush Joint
Winch : 44,000 Lbs Pullback
Hydraulic and Mechanical Upgrades : Almost All New Hydraulic Hoses and Kelly Hose (2024) New Heads, Radiator, Water Pump, Starter, Turbo, Alternator (2024) All New Wiring for Deck Engine (2024) All New Tires (2024) Rebuilt Both Pullback Cylinders (2025) Digital Engine Management System Added (2024) Table Bushing Included Set Up to Drill
Mounted on Brigadier Truck : Powered By Caterpillar 3208 Diesel Engine 13-Speed Transmission 41,546 Miles on Truck
--------------------------------------------------------------------------------------------------------------------------- Search words (for official use only) : 1986 Built Schramm T660 Drilling Rig for Sale Schramm T660 Rotadrill Drilling Rig for Sale Schramm T660 Rotadrill - 1986 Built - For Sale Used Schramm T660 Drilling Rig for Sale Schramm T660 Drilling Rig for Sale in USA --------------------------------------------------------------------------------------------------------------------------
Atlas Copco T4W DH Drilling Rig for Sale Atlas Copco T4W DH Drilling Rig - 2016 Built - For Sale Model : T4W DH Drill Rig Manufacturer : Atlas Copco Year : 2016 Condition : Used Description : 2016 Atlas Copco T4W DH Drill Rig IR HR2.5 1250 CFM x 350 PSI Air Compressor Cummins QSK19 (rated 750 HP) Diesel Deck Engine DH 70,000 lbs of Pullback Deep Hole 18 GPM Bean Water Injection Pump 7 Gallon DHD Oiler Mounted on a CCC (Crane Carrier) Truck Cummins ISM 410 (410 HP) Diesel Engine Jake Brake 8LL with Full Locking Rears Spur Gear Rotary Head Main 7 Rod Carousel and 2 - 4 Rod Carousels (400 ft on the drill with a Starter Rod) Angle Package 20" Table All Aluminum Wheels, Fenders and Tool Boxes All Engines are Pre-Emissions Miles- 20,712 Hours- 2,629 Note: Currently in use every day Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. --------------------------------------------------------------------------------------------------------------------- Search words (for official use only) : Drilling Rig - Atlas Copco T4W DH for Sale 2016 Built Atlas Copco T4W DH Drilling Rig for Sale Used Atlas Copco T4W DH Drilling Rig for Sale Atlas Copco T4W DH Used Land Drilling Rig for Sale Atlas Copco T4W DH Drilling Rig for Sale in USA -----------------------------------------------------------------------------------------------------------------------
Ingersoll-Rand TH60 Drilling Rig for Sale Drilling Rig - Ingersoll-Rand TH60 - For Sale Model : TH60 Drill Rig Manufacturer : Ingersoll-Rand Year : 1985 Condition : Used Description : 1985 Ingersoll-Rand TH60 Drill Rig - S/N: 0838 Mounted on an International Paystar 5000 Truck - VIN #2HTTGDWT6FCA161151985 Detroit 8V71 diesel engine (6673+ hours) IR 750 cfm / 250 psi Air Compressor (6857+ hours) 6 Rod Carousel 15 Drill Pipe (20ft x 4-1/2") included 128,081+ Miles on Truck Hydraulic Leveling Jacks Pipe Rack Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. -------------------------------------------------------------------------------------------------------------------- Search words (for official use only) : 1985 Built Ingersoll-Rand TH60 Drilling Rig for Sale Ingersoll-Rand TH60 Drilling Rig - 1985 Built - For Sale Used Ingersoll-Rand TH60 Drilling Rig for Sale Ingersoll-Rand TH60 Drilling Rig for Sale in USA Ingersoll-Rand Used Drilling Rig for Sale in USA -------------------------------------------------------------------------------------------------------------------------
Longyear 44 Core Drilling Rig for Sale Sprague & Henwood S&H Longyear 44 Core Drilling Rig for Sale
Model : Longyear 44 Core Drill Manufacturer : Sprague & Henwood S&H Condition : Used
Longyear 44 Wireline Core Drill on Sprague & Henwood Platform hydraulic jacks auxiliary winch 4-cylinder Deutz 2011 engine with Ford truck clutch, 2 cylinder 435 Deutz Water Pump newer Longyear swivel (has bronze bushings in hoist drums) Single traveling block with approximately 3.000 ft. BQ depth capability or can be upgraded with double cables for over 5,000 ft. depth capability Mounted on a 1970 C360 Chevy Truck 20,745 miles Per Seller : In working order, just needs fuel and battery then ready to go back to work right away
List of items available at extra cost : Bean 435 water pumps. Joy 22 parts. Brake bands for Joy drills and Sprague & Henwood drills. Hydraulic Chuck cylinders for Longyear 44’s. Joy Transmission. BQ core barrels.
Also available at extra cost : 142C Sprague & Henwood 24" feed 3 Cylinder Deutz 912 New Rebuild 2 Bean 20 pumps Sprague & Henwood 30" feed Acker automatic chuck up to NQ Gardner Denver water pump '93 Volvo 13 speed with air brakes has 1000 gallon water tank.
--------------------------------------------------------------------------------------------------------- Search words (for official use only) : Longyear 44 Wireline Core Drilling Rig for Sale Used Longyear 44 Core Drilling Rig for Sale Longyear 44 Wireline Core Used Drilling Rig for Sale Sprague & Henwood S&H Longyear 44 Core Drill for Sale Longyear 44 Wireline Core Drilling Rig for Sale in USA -------------------------------------------------------------------------------------------------------
Longyear 44 Core Drilling Rig for Sale Generic Longyear 44 Core Drill Rig for Sale
Model : Longyear 44 Core Drill Manufacturer : Generic Condition : Used
Longyear 44 Wireline Core Drill with angle drilling capability Mounted on a 1993 Freightliner Hydrualic pump upgraded to variable displacement piston pump. Bean 435 Water Pump 4-Cylinder Deutz 2011-series Drill Engin 2-Cylinder Deutz 1013-series Water Pump Engine. 3 hydraulic leveling jacks Single traveling block with approximately 3,000 ft BQ depth capability, or can be upgraded with double cables for over 5,000 ft depth capability Deutz 1013 diesel engine on deck In working order, just needs fuel and battery then ready to go back to work right away
A list of items available at extra cost : Joy 22 parts Brake bands for Joy drills and Sprague & Henwood drills Hydraulic Chuck cylinders for Longyear 44’s Joy Transmission BQ core barrels
--------------------------------------------------------------------------------------------------------- Search words (for official use only) : Used Generic Longyear 44 Core Drilling Rig for Sale Generic Longyear 44 Core Used Drilling Rig for Sale Drilling Rig - Generic Longyear 44 Core - For Sale Generic Longyear 44 Wireline Core Drilling Rig for Sale Generic Longyear 44 Core Drill Rig for Sale in USA -------------------------------------------------------------------------------------------------------
Ingersoll-Rand TH60 Drilling Rig for Sale Drilling Rig - Ingersoll-Rand TH60 - For Sale Model : TH60 Drill Rig Manufacturer : Ingersoll-Rand Year : 1976 Condition : Used Description : Mid-1976 Ingersoll-Rand / Cyclone TH60 Drill Rig Mounted on a newer 2012 International Workstar Truck Rated 425hp Diesel Engine 10 Speed Eaton transmission Centrifugal 4x3x13 Mud Pump (hydraulic driven) 280 ft of Drill Pipe (20ft x 4-1/2” x 2-7/8” IF) & Tooling Note: no air compressor on board Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. --------------------------------------------------------------------------------------------------------- Search words (for official use only) :1976 Built Ingersoll-Rand TH60 Drilling Rig for Sale Ingersoll-Rand TH60 Drilling Rig - 1976 Built - For Sale Used Ingersoll-Rand TH60 Drilling Rig for Sale Ingersoll-Rand TH60 Used Land Drilling Rig for Sale Ingersoll-Rand TH60 Drilling Rig for Sale in USA -------------------------------------------------------------------------------------------------------
Sandvik Cubex 5200 Core Drilling Rig for Sale Drilling Rig - Sandvik Cubex 5200 - For Sale
Model : Cubex 5200 Core Drill Manufacturer : Sandvik Year : 1992 Condition : Used
1992 Sandvik Cubex 5200 Core Drill Mounted on a mobile carrier UG drill Air Compressor Hours - 13,152 Overhauled in 2020 Note : Updated pictures listed here mid-April 2025
--------------------------------------------------------------------------------------------------------- Search words (for official use only) : 1992 Built Sandvik Cubex 5200 Core Drilling Rig for Sale Sandvik Cubex 5200 Core Drilling Rig - 1992 Built for Sale Used Sandvik Cubex 5200 Core Drilling Rig for Sale Sandvik Cubex 5200 Core Used Drilling Rig for Sale Sandvik Cubex 5200 Core Drilling Rig for Sale in USA -------------------------------------------------------------------------------------------------------
3000M rig For Sale - Ideco H30 Double Ideco H30 Double 3000m Rig For sale Specifications Ideco H-30 model with a 40 X 8 – 3808 drum size Self propelled double drum, back in & 4 axel carrier Rated capacity of 3000m – 73mm tubing Detroit 8V92N, 365 HP- 225 KW engine Allison CLT5860 6 speed transmission 20.3 X 101.6 main drum brakes 20.3 X 96.5 sand line brakes Pemco 96-170, 29m rated, 78 dNa & stung 6 lines mast 3000m of 73mm tubing racking capacity Sowa 0824-3-A 100 ton travel blocks Vapor proof florescent & sodium lights 25.4 mm X 300m drilling line 14mm X 3000 m sand line Hydraulic Martin Decker Clipper weight indicator Dual winches Combination 3 compartment skidded steel building 3.5m W x 11.6m L John Deer 75 KW generator Handling Equipment Foster 58-93R tubing tongs Cavins Advance Model C air slips BJ-90-TA -100 ton X 73mm & BJ-90-TA-65 ton X 60.2 mm elevators 73 mm & 60.3mm are the standard tubing sizes 19mm – 25mm rod sizes 2 – 2.4m x 13.7m & 1 – 2.4m x 5m rig mats 1.25m W x 12.5m L c/w 2 sets hinged pipe catwalk racks Safety Equipment 4 - 14kg dry chemical fire extinguishers 4 self-contained Scott air pack breathing apparatuses c/w 2 spare bottles LEL monitor & 6 personal gas detector monitors Safety and directional signs Electrical ground bonding equipment Basket stretcher c/w spine board, rescue slings & blankets Crown saver 2 self-retracting life lines BOP Equipment Class III Shaffer 152mm X 35mpa, LWS double gate & shaffer spherical Wagner 3 accumulator station - 250 L 21mpa c/w operators controls & N2 backup mounted in skidded combination building 2 -73mm - 35mpa safety valves 89mm rod BOP 152mm kill spool X 21mpa c/w 50mm wing valve 76mm x 21 mpa swab lubricator c/w jars & tool trap 76mm X 20mpa swabbing valve Pump Skidded heated building National JWS-340 triplex 102mm plungers X 127mm stroke John Deer Model 6125H 12.5 L 350 HP engine Eaton 10 speed transmission Mission Magnum 127mm X 152mm charge pump 6 – 50mm X 35mpa manifold Mud Tank 38m3 two compartment mud tank c/w stairs, railings, mix hopper, mud guns, settling trough, steam coil, lighting & wind flag 120m X 50mm - 35mpa line pipe 12m X 10mm suction hose External gauge
---------------------------------------------------------------------------------------------------------------------------- Search words(for official use only) : Ideco H30 Rig - 3000m for Sale Ideco H30 Double Rig For Sale Good and Used Workover rigs American workover rigs for sale Used American Rigs for Sale Carrier Mounted Workover Rigs for sale Workover rig Builders Workover Rig Dealers Workover Rig Sellers Used Workover Rigs for Sale ----------------------------------------------------------------------------------------------------
Sandvik Cubex 6200 Reverse Circulation Drilling Rig for Sale Used Sandvik Cubex 6200 Reverse Circulation Drill for Sale
Model : Cubex 6200 Core Drill Manufacturer : Sandvik Year : 1999 Condition : Used
1999 Sandvik Cubex 6200 Reverse Circulation Drill Set up for mineral exploration applications Mounted on a track carrier The drill is currently wired for 480 volts (It can be run off of both 480 and 600 with an available transformer that can be installed for 600 volts Overhauled in 2019 Set up for RC (Reverse Circulation) drilling Note : Updated pictures listed here mid-April 2025
--------------------------------------------------------------------------------------------------------- Search words (for official use only) : 1999 Built Sandvik Cubex 6200 Reverse Circulation Drill Rig for Sale Sandvik Cubex 6200 Reverse Circulation Drilling Rig - 1999 Built - For Sale Sandvik Cubex 6200 Reverse Circulation Used Drilling Rig for Sale Sandvik Reverse Circulation Drilling Rig for Sale Sandvik Cubex 6200 Reverse Circulation Drill for Sale in USA -------------------------------------------------------------------------------------------------------
Doosan XHP750 Air Compressor & Duramast Drill Rig Package XHP750 Air Compressor & Duramast Drill Rig Package for Sale
Model : XHP750 Air Compressor & Duramast Drill Rig Package Manufacturer : Doosan Condition : Used
Package : Duramast Skid Steer Mounted Drill Rig Hydraulic Rotary Top Head Powered by Skid Steer 300 Ft. Of 2-3/8 Mayhew Regular Thread Drill Rods Towable Rod Trailer Included (Capable of Drilling 400 Deep with A 5-6" Hammer) Breakout Wrench Winch and Rod Lifting Cable 2010 Bobcat T320 Track Loader Skid Steer S/N: A7MP63786 Remote Control 4,653.5 Hours Showing on Meter 2008 Doosan/Ingersoll-Rand XHP750Cat / 300 Psi Air Compressor S/N: 3995T2UCSC44 Caterpillar C9 Diesel Engine S/N: JSC05489 & Arrangement #244-6783 4,176.1 Hours Showing on Meter Towable with Pintle Style Hitch
--------------------------------------------------------------------------------------------- Search words (for official use only) : Used XHP750 Air Compressor & Duramast Drill Rig Package for Sale Air Compressor & Duramast Drill Rig Package for Sale XHP750 Air Compressor & Duramast Used Drill Rig Package for Sale Doosan Air Compressor & Duramast Drill Rig Package for Sale XHP750 Air Compressor & Duramast Drill Rig Package for Sale in USA ----------------------------------------------------------------------------------------------
Ingersoll-Rand T3W Drilling Rig for Sale 1990 Built Ingersoll-Rand T3W Drilling Rig for Sale Model : T3W Drill Rig Manufacturer : Ingersoll-Rand Year : 1990 Condition : Used Description : 1990 Ingersoll-Rand T3W Drill Rig Powered by a Cummins NTA 855 diesel deck engine (0 Hours Since Rebuilt) IR HR2 825 cfm / 350 psi Air Compressor Table is Rebuilt New Gears & Bearings in Transfer Case/Gear Box Many New Hydraulic Hoses 7-Rod Carousel Set Up for 4-1/2" X 20ft Rods (No Rods Included) Repacked Table Slide Cylinder 4-Cylinder Bean Water Injection Pump Hammer Oiler Mounted on a 1990 Ford L9000 Truck Cummins L10 Diesel Engine Eaton Fuller RoadRanger transmission 167,176 Miles Showing on Meter Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. --------------------------------------------------------------------------------------------------------------------- Search words (for official use only) : Ingersoll-Rand T3W Drilling Rig - 1990 Built - For Sale Drilling Rig - Ingersoll-Rand T3W for Sale Used Ingersoll-Rand T3W Drilling Rig for Sale Ingersoll-Rand T3W Used Land Drilling Rig for Sale Ingersoll-Rand T3W Drilling Rig for Sale in USA ------------------------------------------------------------------------------------------------------------------
Gus Pech R-15 Brat-A-Sonic Drilling Rig for Sale Drilling Rig - Gus Pech R-15 Brat-A-Sonic - For Sale
Model : R-15 Brat-A-Sonic Drill Rig Manufacturer : Gus Pech Year : 2006 Condition : Used
2006 Gus Pech R-15 Brat-A-Sonic Drill Rig Mileage – 11,956 Hours – 11,830 Serial# 105GP133WDC24CXY506 GP# 24-400RS Note : 8' x 8' ft deck that folds down when running the rig. Rod holder on the side of the rig that holds 20' ft rods or casing Mounted on a 2006 M2 Freightliner 6x4 Truck Diesel Engine : MBE4000-450 12.8L rated 450hp - SN: 460.933U0837213 Transmission : Eaton 16 speed manual with Chelsea HD PTO Front and rear ABS air brake system 20,000# Front Axle, 46,000# 2 stage Tuftrac rear axle with Pusher axle @ 13,200# capacity Note : All the Gus Pech specifications and detailed descriptions are viewable in the pictures on the spec sheets. Note : The demand for sonic drilling in the industry to drill mostly environmental projects ranging from deep borings (300’ – 600’) with discreet water sampling, installation of CMT wells, monitoring wells ranging from 2” – 6” at depths reaching 500’ ft. The rig is also capable and has been used on projects where 30 – 45 - degree angle wells were installed. Tooling & Sonic Heads available (cost extra) : About 450’ of 10-3/4” x 10’ H90 Sonic Casing (270’ ft never used), several H90 drive heads for 5-7/8”, 7-5/8”, 8-5/8”, 9-5/8” and 10-3/4” casing sizes. Overshots and taps for all sizes, core bits, casing shoes and some core barrels. We can sell this lot separately or include it in a package deal. We can offer 3 complete Dietrich sonic heads and parts and pieces to assemble maybe 2 more sonic heads (each head cost extra).
--------------------------------------------------------------------------------------------------------- Search words (for official use only) : 2006 Built Gus Pech R-15 Brat-A-Sonic Drilling Rig for Sale Gus Pech R-15 Brat-A-Sonic Drilling Rig - 2006 Built for Sale Used Gus Pech R-15 Brat-A-Sonic Drilling Rig for Sale Gus Pech R-15 Brat-A-Sonic Used Drilling Rig for Sale Gus Pech R-15 Brat-A-Sonic Drilling Rig for Sale in USA -------------------------------------------------------------------------------------------------------
Generic Top Head Drive Drilling Rig for Sale Generic Top Head Drive Drilling Rig - 1985 Built for Sale
Model : Top Head Drive Drill Rig Manufacturer : Generic Year : 1985 Condition : Used
1985 Custom Built Top Head Drive Drill Rig Mounted On A 1997 Ford Louisville Tandem Axle Truck Powered By CAT 3306 Diesel Engine Hydraulic Leveling Jacks & No Carousel Equipped with & set up for air & mud rotary (can connect a portable air compressor) Mission Magnum Mud Pump Mud Slayer M250 Includes 32 Drill Pipes (3-1/2" X 20ft) All Controls Work Well (per the seller) Minor Hydraulic Leaks Present
--------------------------------------------------------------------------------------------------------- Search words (for official use only) : 1985 Built Generic Top Head Drive Drilling Rig for Sale Used Generic Top Head Drive Drilling Rig for Sale Drilling Rig - Generic Top Head Drive - For Sale Generic Top Head Drive Used Drilling Rig for Sale Generic Top Head Drive Drilling Rig for Sale in USA -------------------------------------------------------------------------------------------------------
Soilmec SM 401 Rock Drill for Sale Used Soilmec SM 401 Rock Drill for Sale
Model : SM 401 Rock Drill Manufacturer : Soilmec Condition : Used
Soilmec SM 401 Rock Drill Variable Speed Rotary Head Rollstar Rotary Head Gear Box Rotop Hydraulic Top Hammer Double Head Cummins QSB 5.9-30-T Tier II Diesel Engine
--------------------------------------------------------------------------------------------------------- Search words (for official use only) : Rock Drill - Soilmec SM 401 - For Sale SM 401 Rock Drill for Sale Soilmec Rock Drill for Sale Soilmec Used SM 401 Rock Drill for Sale Soilmec SM 401 Rock Drill for Sale in USA -------------------------------------------------------------------------------------------------------
Klemm 702-2 Micropile Crawler Drill for Sale 2009 Built Micropile Crawler Drill for Sale
Model : 702-2 Micropile Crawler Drill Manufacturer : Klemm Year : 2009 Condition : Used
2009 Klemm 702-2 Micropile Crawler Drill Limited access micropile drill This is a very nice compact drill capable of installing high-capacity micropiles in very limited access settings The Unit starts and runs, all functions working Has a detachable power pack Deutz TCD 2012 L04 2V 4 Cylinder 127 hp 4.038 L Diesel Engine 2370 mm Mast Can work in very low headroom areas while still delivering power enough to go 100’ ft+ in depth with up to 9″ piles Power pack is umbilical, so drill can work inside, while the power is supplied out away from the operation This machine also has a water Injection System, and 8 in Double Grouser Tracks Meter reads : 6,502+ Hours
--------------------------------------------------------------------------------------------------------- Search words (for official use only) : Used Klemm 702-2 Micropile Crawler Drill for Sale Klemm 702-2 Micropile Crawler Drill - 2009 Built for Sale 702-2 Micropile Crawler Drill for Sale Klemm 702-2 Micropile Crawler Used Drill for Sale Klemm 702-2 Micropile Crawler Drill for Sale in USA -------------------------------------------------------------------------------------------------------
Chicago Pneumatic T-700WH Deep Hole Drill Rig & Package Drilling Rig - Chicago Pneumatic - 1981 Built for Sale Model : T-700WH Deep Hole Drill Rig & Package Manufacturer : Chicago Pneumatic Year : 1981 Condition : Used Description : 1981 Chicago Pneumatic T-700WH Deep Hole Drill Rig & Package 900/350 on-board air, mounted on a tandem axle steer Kenworth carrier -75,000# pull-back, 4-rod carousel, CAT 3406B deck engine recently replaced (less than 500 hours ago), rebuilt dual top-head motors and planetaries, rebuilt rotational pump and fan motor/pump, new Nylotron head guides, new winch line Additional equipment included : 3,200ft 4 1/2" x 30ft drill pipe with tandem axle drill pipe trailer mounted IR tugger winch, skid mounted Sullair 900/350 air compressor, skid mounted 2000 gallon fuel tank, skid mounted 300 bbl water tank, skid mounted doghouse, spare CAT 3406B engine (needs rebuilt), 6" hammer, 12" hammer/stabilizer combo, 12" tri-cone stabilizer, casing lifters for both threaded and plain-end, casing slips, break out wrench, J-wrench. Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. --------------------------------------------------------------------------------------------------------------------------------- Search words (for official use only) : 1981 Built Chicago Pneumatic T-700WH Deep Hole Drilling Rig for Sale Used Chicago-Pneumatic Drilling Rig for Sale Used Chicago Pneumatic T-700WH Deep Hole Drill Rig & Package Chicago Pneumatic T-700WH Deep Hole Drilling Rig for Sale in USA Chicago-Pneumatic Drilling Rig for Sale in USA --------------------------------------------------------------------------------------------------------------------------
Driltech D40K Drilling Rig for Sale 1977 Built Driltech D40K Drilling Rig for Sale Model : D40K Drill Rig Manufacturer : Driltech Year : 1977 Condition : Used Description : 1977 Driltech D40K Drill Rig Sullair 750 cfm / 350 psi Air Compressor (unknown hours) CAT 3406B Diesel Deck Engine - rated 400 HP (Rebuilt 600 hours since) Dual Carousels Includes 300ft of 4.5" X 25ft Drill Pipe and Tooling Mounted on a CCC (Crane Carrier Company) Truck Cummins NTC 350 Diesel Engine Note: New White color paint job completed in July 2024 Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. --------------------------------------------------------------------------------------------------------------------------- Search words (for official use only) : Drilling Rig - Driltech D40K - For Sale Used Driltech D40K Drilling Rig for Sale Driltech D40K Drilling Rig - 1977 Built for Sale Driltech D40K Used Land Drilling Rig for Sale Driltech D40K Drilling Rig for Sale in USA ------------------------------------------------------------------------------------------------------------------------
Sandvik T1000 Drilling Rig for Sale 2007 Built Sandvik T1000 Drilling Rig for Sale
Model : T1000 Drill Rig - Water Well Manufacturer : Sandvik Year : 2007 Condition : Used
2007 Sandvik T1000 Drill Rig
Note : Converted to a water well drill rig (repairs & services completed and ready to go to work on projects)
Deck Engine : CAT C-15 Diesel - Rated 540 HP @ 1,800 RPM (Rebuilt May 2025) Air Compressor : Sullair 1,000 cfm / 350 psi Carousel : Handles 4" Drill Pipe, Includes 3 Pipe (20ft Ft X 4") Cooling System : AKG Cooler, 48” 8-Blade Fan @ 1,100 RPM Water Injection Pump : GPM Bean System Rod Winch : 1 Unit
Drilling Capabilities & Features : Angle Drilling : 0 To 25 Degrees Stability : 4 Leveling Jacks Pump Drive : Funk 28000 Series Type 3, Ratio 0.91:1 Hammer Lubricator
Converted to Water Well Drilling at EWD : Installed : Includes all the repairs & services completed Operators Step and Stand for Control Panel Pipe Trough, Jib Boom, Rod Handling Winch, Etc.
Dimensions & Weight : Length : 37 Ft Width : 8 Ft 6" In Height : 13 Ft 2" In
Truck Mount - 2006 Sterling LT9500 Vin : 2FZHAZCV77AX19517 Transmission : 8LL Engine : Mercedes-Benz Diesel MBE4000-370 12.8l, 370 Hp @ 1,900 RPM 2,000 Governed Rpm 1,450 Lb.-Ft @ 1,100 RPM Tires : Front : 425/65R 22.5, Tubeless Radial Rear : 11R 22.5, Tubeless Radial Dimensions & Weight : Length : 37 Ft Width : 8 Ft 6 In Height : 13 Ft 2 In
--------------------------------------------------------------------------------------------------------- Search words (for official use only) : Sandvik T1000 Drilling Rig - 2007 Built - For Sale Drilling Rig - Sandvik T1000 - For Sale Used Sandvik T1000 Drilling Rig for Sale Sandvik T1000 Used Land Drilling Rig for Sale Sandvik T1000 Drilling Rig for Sale in USA ---------------------------------------------------------------------------------------------------------
Showing 1 to 48 of 605 results
.png)
.png)
.png)
.png)
.jpg)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
Search Here
DrillRig11502188849903.jpg "Ingersoll-Rand T4BH Blast Hole Drilling Rig-For Sale")
