Horizontal pulling force @ 210 bar
5 Ton
Speed @ 15 liter / min @ 140 bar
60 m/min
Operation hydraulic oil
Tellus 32
Max water depth
2000 meter
Rope capacity (11 mm Dynex Dux 75 or similar)
20 Meter
Total weight in air
122 kg
Total weight in water
81 kg
Winch dimensions L x W x H
609 x 490 x 402 mm
Capacity
Size
Weight
Overall Size When Filled
Tonnes
Empty & Rolled metres
kg
Height Meter
Diameter Meter
1
0.9×0.56×0.56
23
2.3
1.2
2
1×0.6×0.6
45
3.5
1.6
2L
40
2.1
1.9
3
1.03×0.6×0.6
65
4.2
5
1.07×0.7×0.7
100
4.6
2.0
5L
95
2.5
2.7
10
1.1×0.8×0.8
135
5.8
12L
1.2×0.8×0.8
140
4.0
3.0
20
1.1x1x1
230
35
1.7×1.2×1.2
340
7.0
50
1.6x1.4x1.5
450
6.0
4.5
2.8x2.0x2.0
950
7.9
5.5
Item No
Qty
Part No.
GA- Description
Material
36626-001-r2
Latch Mech with Cylinders
Various
36626-030-r1
Pump with Valve
36626-025-r1
Mounting Bracket
AL 6082 T6
4
Tube to Pump
Tube
36626-060-r2
Frame Work
6
36626-006-r1
Suction Flange
316L
7
36626-101-r1
P pe range
8
36626-102-r1
9
36626-105-r1
Rubber S70
36626-106-r1
11
36626-107-r1
12
Tube Place Assy
13
36177-020-R1
Buoyancy Block
14
36177-025-R1
Type
Dimension(mm)
Mass in air/seawater(Kg)
Bundle size
MudMat®Standard
MudMat®Reinforced
LxWxH(cm)
MudMat®30
6000x5000x30
674/94
730/149
614x60x40
MudMat®18
3600x5000x30
410/57
445/91
367x60x40
MudMat®9
3600x2600x30
220/31
238/49
367x60x20
MudMat®4
2400x1600x30
91/13
99/20
243x30x15
Spreader / Lifting Beams for Rent Spreader / Lifting Beams up to 2000 Ton capacity for Rent
These spreader beams are some of our beams available for rental. Minimum rental is 3 days. Special spreaders / lifting beams up to 2000 Ton capacity on request. Comes with control card / certificate, beams can be equipped with wires and shackles according to your requirement.
Adjustable Spreader Beams @ 20º top sling1 x 12.5M, capacity up to 24T 1 x 14M, capacity 57 T 1 x 11M, capacity up to 100T 2 x 24M, capacity 198T 2 x 14.5M, capacity 250T 2 x 24M, capacity 319 T 2 x 22M, capacity 400T
If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. --------------------------------------------------------------------------------------------------------- Search words (for official use only) : Spreader Beams up to 2000 Ton capacity for Rent Lifting Beams up to 2000 Ton capacity for Rent Spreader / Lifting Beams @ 20º top sling for Rent 7,8M, capacity 87T Spreader / Lifting Beams for Rent 4,5M, capacity 90T Spreader / Lifting Beams for Rent -------------------------------------------------------------------------------------------------------
Subsea Manifold System For Sale Subsea Oilfield Equipment for Sale Subsea Kit For Sale
History : This field was put onstream in 1994 and ceased production in 1999. Located 21km from Frigg Complex. The field was de-commissioned in 1999 and the 3 wells plugged and abandoned. The 10,000psi wellhead was not ”On the Shelf” and specialised development was required.
Design Parameters :
Based on 670 bars and 125 deg C with flowrates at 2.3MSM3/d. Compliance based on Norwegian statutary authorities NPD etc meeting with the most stringent requirements in the world. Water depth 120 metre. 3 off production subsea wells tie back to TCP2 platform
Status : Currently stored in Tananger Norway. Has been maintained throughout delivery installation and return onshore.
Major Components :
Design Parameters : EF installations were designed for a minimum flow-rate of 1.25MSM3/d and a maximum flow-rate of 6.5MSM3/d. The maximum working pressure rating was 345bar. Bottom hole flowing temperature approx 62 deg C, Wellhead hole flowing temperature approx 35-40 deg C, Wellhead static temperature 4-6 deg C. Design was based on 5 subsea production wells located over 2 production templates PSA & PSB. For reduncy reasons and to minimize intervention it was decided at this time to include 2 off Xmas trees in series for each well. 1 off Vetco and 1 off ”Well Jumper Module tree Cameron. There were 3 wells on PSA and 2 wells on PSB , the two production stations produced to a central manifold station (CMS) located halfway between the 2 production stations which were approx 3km from each other. Production flowed via the CMS to Frigg where it was metered and treated.
Major assemblies comprises : 5 off Vetco Xmas tree and tree cap assemblies, each gas production tree comprising 18 ¾” SG-5 wellhead connector, integral with 5” x 2” , 5,000psi working pressure valve block, with fail safe closed valves, equipped with visual position indicators and overrides. Manifold spool flanged to block, production spool, Xmas tree guide frame, control system components and piping. Complete tubing hanger system including hydraulic running tools, adaptors, VAM-Hydril x over riser couplings, emergency recovery tools, orientation/ inspection tools. Control systems for THRT. Intervention amd maintenance systems incl; flowhead, 5,000 riser system, EDP/ LRP, hydraulic control system, adaptors, test stumps, remote killing equipment, guide bases, hubs, sealing caps, dummy Xmas tree etc 6 off Kongsberg/ Cameron WJM (Xmas trees) Xmas trees made of forged steel block of low alloy steel, all sealing areas are inconel inlaid (ring grooves, seal sub pockets, valve seat pockets)
Module M35 Description : The module was delivered, installed and commenced production in 1993. Design life was 30 years. Production ceased as with Lille-Frigg in 1999. The purpose of the module was to faciltate handling of process for both Lille-Frigg and the Oil producing satellite platform Frøy. (Note Frøy platform has been returned onshore and been disposed of) Dimensions of the module are 40.5m length x 24m width x 24.8m height. Weight for single lift is 3216 ton. The module is located on the TCP2 platform located within Frigg process handling complex. The module is equipped with a pedestal crane with working radius at 36 tons between 9-30 metres and 12 tons with maximum radius of 60 metres. This crane carried out material handling for all of the TCP2 platform, which meant that TOTAL could at the time dispose of the rest of the smaller cranes which were out of date. The module is in pristine condition ”As New” with all systems and equipment under full preservation. and maintenance. The module contains systems and equipment for treatment of oil & gas comprising the following main functions; Gas System Oil System DEG recovery Fuel Gas Compression Water Injection System Electrochlorination System Fine Filter System Dearation System Water Injection Pumps Fiscal Metering Systems Produced Water System Heating Medium System Chemical Injection System Electrical and Control Systems Firewater and Deluge systems Fire & Gas monitoring and protection. Lighting, normal and emergency.
Also included in the module are, intrument control room, low voltage rooms, high voltage room, drains, stairs, platforms, escapes routes, vent/ flare systems, piping to ANSI standards manifolds and distribution. All cabling routes etc are intact.
Module (pancake) P48 description : The module which is located inside the support frame of the TCP2 contains equipment for stabilisation of condensate and oil & gas comprising the following main functions; Separator DEG and condensate pumps Condensate metering Fuel gas compressor Module dimensions; 16.2m long x 12.2m width x 5.2m height The module has a design life of 30 years with a start of production 1993 ceased production 1999.
Showing 1 to 48 of 142 results
.png)
.png)
.png)
.png)
.jpg)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
Search Here
forRent-11741595081415.jpg "Spooling Machine / Reel Drive System (RDS) - For Rent")
forRent-11741595081415.jpg "Spooling Machine / Reel Drive System (RDS) - For Rent")
