- Storage winch c/w 1750m of 78.5mm wire
- 150t Capstan Winch
- 20ft containerised HPU
- Running line load cell
- Cooler for winch gearbox


-----------------------------------------------------------------------
Search words (for official use only) - 

---------------------------------------------------------------------

Skagit AED-285 Mooring Winch for Sale
Used Mooring Winch for Sale
Skagit AED-285 Mooring Winch with Detroit for Sale

Skagit AED-285 Mooring Winch with Detroit, 12V71 Diesel engine.

Make : Skagit
Model No : AED - 285
Drum Dimensions : 40in Barrel dia x 52in Barrel long x 88in Flange dia
SWL : 90 Tonne
Wire Size : 2-1/4in 57mm
Wire Capacity : 5,400 ft
Brake : 550,000 lbs
Level Wind : No

-----------------------------------------------------------------------------------
Search words (for official use only) - 

Skagit AED-285 Mooring Winch for Sale
Used Mooring Winch for Sale
Mooring Winch for Sale
Skagit AED-285 Mooring Winch with Detroit for Sale
Used Skagit AED-285 Mooring Winch

Model No. SMS-HMW/SD-40
Max. Pull : 40mt @ 1st layer
Drum capacity : 1000m x 44mm ɸ SWR
Brake and Clutch : Hydraulically operated


-----------------------------------------------------------------------------------
Search words (for official use only) :

-----------------------------------------------------------------------------------

Man Riding Winch for Sale
Man Riding Winches 5T - 250m Drum Capacity for Sale

Rina approved 5T

Man Riding Winch

1. Winch performance


1st / 6.22 / 9.33 / 20 / 58.9
2nd / 5.75 / 8.625 / 21.6 / 122.6
3rd / 5.35 / 8.025 / 23.2 / 191.1
4th / 5 / 7.5 / 24.9 / 264.4

---------------------------------------------------------------------------------------------------------------
Search words (for official use only) :

Man Riding Winches for Sale

5 ton Man Riding Winch with 250m Drum Capacity
250m Drum Capacity Rina Approved Winch

5T Man Riding Winch for Sale

Rina Approved Man Riding Winch for Sale

--------------------------------------------------------------------------------------------------------------- 

The winch system consists of 3 winches:
Bell winch, Clump-weight winch and Umbilical winch.

Both the Bell and Clump-weight winches are man-riding.
All 3 winches come completewith auto-spooling and local control.

Max ratedpull : 12mT at top layer
Max ratedspeed : 20m/min at top layer
Drumcapacity : 250m x Æ34mm SWR
StaticBrake-holding : 18mT at top layer
Controls : 2 x PVG32 proportional valves


Max ratedpull : 8mT at top layer
Max ratedspeed : 20m/min at top layer
Drumcapacity : 500m x Æ26mm SWR
StaticBrake-holding : 12mT at top layer
Controls : 2 x PVG32 proportional valves


Max ratedpull : 2.5mT at top layer
Max ratedspeed : 20m/min at top layer
Drumcapacity : 250m x Æ94mm umbilical
StaticBrake-holding : 3.75mT at top layer
Controls : 2 x PVG32 proportional valves

The winches is LR  (LloydsRegister) approved and are intended for 0°C  to 60°C
operating ambience.

Inspection : Singapore


-------------------------------------------------------------
Search words (for official use only) -

-------------------------------------------------------------

170 ton at first layer, speed 0 – 20 m/min
60 ton at last layer, speed 0 – 40 m/min
Capacity : 1800m 8” rope or 7000m 3”steel wire
Water cooled brake resistors
Wire/Rope spooling device
Motor Control and local Control Panel (radio)
Remote Control Console
Low voltage VFD Single drive system
Recommended spare parts for five year operation

HPU Electric motors : 2 x ABB/Siemens/ Franz Wolfer/VEM
350KW per unit, heater build-in motor
IP56, S1 continuous duty, insulation class F
Electrical general : Ambient temp. 50 deg C
Voltage 440V/660V, frequency 60Hz

Winch Band Brake : Hydraulic set on drum flange with stainless steel(AISI 316L) lining of min 5 mm thickness
Brake Capacity : 200ton@first layer / 80ton@last layer
Brake torque is set 50% by spring load and 50% by hydraulic
Emergency quick release and free wheeling

Piping : Hot dip galvanized, under 35 mm in stainless steel.
Comes sandblasted and painted for marine use.
Net weight: 108.5 ton


------------------------------------------------------------------------------------
Search words (for official use only) :       

----------------------------------------------------------------------------------

Hitec Traction Winch for Sale

1997 built Traction Winch for Sale

Hitec 130 Tonne Traction Winch
Used Traction Winch for Sale

YOM : 1997
Dimensions : 3.55m x 3.1m x 2.17m (h)
Weight : 20 Tonnes
Condition : Used

-----------------------------------------------------------------------------------
Search words (for official use only) - 

Hitec Traction Winch for Sale
Hitec Traction Winch - 130 Tons - For Sale
Hitec 130 Tonne Traction Winch
Used Traction Winch for Sale
1997 built Traction Winch for Sale

Ship's Towing Winch for sale
40 ton Towing Winch for Sale
Towing Winch for Sale

:

Winding capacity/speed : 40 ton @ 5 mtr / min
Winding capacity/speed : 8 ton @ 15 mtr / min
Drum rpm : 40 ton @ 2.4 rpms
Drum rpm : 8 ton @ 7.3 rpms
Power : 80 hp

---------------------------------------------------------------------------------------------------------

Ship's Towing Winch for sale

40 ton Ship's Winch for sale

Ship's Towage Winch
Ship's Towage Winch for sale - 40 ton
Towing Winch for sale

-------------------------------------------------------------------------------------------------------

:
Hydraulic anchor handling and towing winch : 1 ea
Local and remote control unit : 1 set
Spooling unit c/w tension monitor system : 1 ea
Diesel driven hydraulic power pack : 1 ea
Hydraulic storage reel with local control unit : 2 ea
Spare reels : 2 ea

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

------------------------------------------------------------------------------------------
Search words (for official use only) :

------------------------------------------------------------------------------------------

Line Pull : 670,000 lbs. at Bare Drum
Cable Capacity : 2 3/4" cable 9,800'
Engine Package Skid Assembly : 10,500 lbs
Winch Drum Assembly in Transport Frame : 78,000 lbs
Winch Frame Assembly : 92,000 lbs
Total Estimated Weight without Wire Rope : 180,500 lbs
Min. Air Pressure : 100 psi
Water : 50 GPM for heat exchanger (Sea Water)
Electrical Voltage (AC) : 110 V

----------------------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------------------

Line Pull : 100 metric tons
Cable Capacity : 44mm or 48mm diameter wire rope
Mode of Pull : Intermittent
Mode of Payout : Intermittent



-----------------------------------------------------------------------------------------------------------------------------
Search words (for official use only) -

------------------------------------------------------------------------------------------------------------------------------

Line Pull : 140,000 lbs. at Bare Drum
Cable Capacity : 1½” cable 4,500'
Single Drum Winch : 25,000 lbs
Hydraulic Power Unit (HPU) : 8,500 lbs
Approx. Air Required :
100 psi
375 cfm

Water : 80 GPM for heat exchanger
Male Cam Lock : 2 in
Female Cam Lock : 2 in
Input and discharge Hose : 50 ft
Cable Diameter : 2 in


--------------------------------------------------------------------------------------------------------
Search words (for official use only) -  

---------------------------------------------------------------------------------------------------------

Single Drum Winch : 15,000 lbs
Hydraulic Power Unit (HPU) : 8,500 lbs
Approx. Air Required :
100 psi
375 cfm

Water : 80 GPM for heat exchanger
Male Cam Lock : 2 in
Female Cam Lock : 2 in
Input and discharge Hose : 50 ft


-------------------------------------------------------------------------------
Search words (for official use only) -

---------------------------------------------------------------------------------

Spooling Unit : 52,000 lbs
Hydraulic Power Unit (HPU) : 8,500 lbs
Spool Flange Diameter : 223 in
Spool Width : 117 in
Shaft Diameter :
6 in
12 in

Approx. Air Required :
100 psi
375 cfm

Water : 80 GPM for heat exchanger
Male Camp Lock : 2 in
Female Camp Lock : 2 in
Input and Discharge Hose : 50 ft



-----------------------------------------------------------------------------------------------
Search words(for official use only) -

-----------------------------------------------------------------------------------------------

Line Pull : 815,000 lbs. at Bare Drum
Cable Capacity :
1 ½” cable 19,200’
2 ½” cable 7000’

Engine Package Skid Assembly : 8,500 lbs
Winch Drum Assembly in Transport Frame : 64,000 lbs
Winch Frame Assembly : 57,000 lbs
Optional Levelwind Assembly : 16,000 lbs
Total Estimated Weight without Wire Rope : 129,500 lbs
Min. Air Pressure : 100 psi
Water : 50 GPM for heat exchanger (Sea Water)
Electrical Voltage (AC) : 110V
Cable Diameter : 3 in

Used for Subs Sea Installation of :
J Tube pulls
Jacket pulls
Jumper installations
Mooring line installations
Pipe line pulls
Steel lead Installations
Trees
Tubing head spools



-------------------------------------------------------------------------------
Search words (for official use only) -

---------------------------------------------------------------------------------

Single Drum Winch : 15,000 lbs
Hydraulic Power Unit (HPU) : 8,500 lbs
Approx. Air Required :
100 psi
375 cfm

Water : 80 GPM for heat exchanger
Male Cam Lock : 2 in
Female Cam Lock : 2 in
Input and discharge Hose : 50 ft

-------------------------------------------------------------------------------
Search words(for official use only) -  

---------------------------------------------------------------------------------

Single Drum Winch

SMATCO Model 84-DPS-100 for Hire
SMATCO Model 84-DPS-100 Single Drum Winch for Charter
Single Drum Winch - 367,928 lbs. at Bare Drum

Single Drum Winch for Lease
SMATCO Model 84-DPS-100 - Deep Water Winch for Charter

Marine Winch for Charter
Offshore Winch for Lease

Line Pull : 367,928 lbs. at Bare Drum
Cable Capacity : 1 1/2" cable 12,000’
Engine Package Skid Assembly : 9,000 lbs
Winch Drum Assembly in Transport Frame : 45,000 lbs
Winch Frame Assembly : 37,000 lbs
Optional Levelwind Assembly : 14,000 lbs
Total Estimated Weight without Wire Rope : 91,000 lbs
Min. Air Pressure : 100 psi
Water : 50 GPM for heat exchanger (Sea Water)
Electrical Voltage (AC) : 110 V

Used for Sub Sea Installations of :
J Tube pulls
Jacket pulls
Jumper installations
Mooring line installations
Pipe line pulls
Steel lead Installations
Trees
Tubing head spools

-------------------------------------------------------------------------------

Single Drum Winch SMATCO Model 84-DPS-100 for Hire
Marine Deck Winch for Charter
Single Drum Winch for Hire - 367,928 lbs. at Bare Drum

Deep Water Winches for Charter
SMATCO Model 84-DPS-100 Single Drum Winch for Lease
Rig Winch for Rent
SMATCO Model 84-DPS-100 Single Drum Winch

---------------------------------------------------------------------------------

Single Drum Winch - Hepburn Model 83-MPE
Single Drum Winch for Lease
Hepburn Model 83-MPE Single Drum Winch for Charter
Marine Deck Winch for Charter
Hepburn Model 83-MPE-1602 Single Drum Winch
Single Drum Winch - 2,00,000 lbs. at Bare Drum

Line Pull : 200,000 lbs. at Bare Drum
Cable Capacity : 1 ½” Cable 7,500’
Single Drum Winch : 30,000 lbs
Hydraulic Power Unit (HPU) : 8,500 lbs
Approx. Air Required :
100 psi
375 cfm

Water : 80 GPM for heat exchanger
Male Cam Lock : 2 in
Female Cam Lock : 2 in
Input and Discharge Hose : 50 ft

Used for :
Jumper Installations
Matt Installations
Pipe Line Pulls
Various Sub Sea Installations

Options :
Optional Floating Sheave
Optional Sub Skid

-------------------------------------------------------------------------------

Single Drum Winch -

Hepburn Model 83-MPE-1602

Hepburn Model 83-MPE-1602 - Single Drum Winch for Lease
Single Drum Winch for Charter - 200,000 lbs. at Bare Drum

Marine Winch for Hire

Deep Water Winches for Rent
Single Drum Winch for Rent -

Hepburn Model 83-MPE-1602

Rig Winch for Lease
Offshore Winch for Charter

---------------------------------------------------------------------------------

Line Pull : 400,000 lbs. at Bare Drum
Cable Capacity : 2 1/2" cable 4,874'
Total Estimated Weight without Wire Rope : 82,500 lbs
Approx. Air Required :
100 psi
375 cfm

Water : 80 GPM for heat exchanger
Male Cam Lock : 2 in
Female Cam Lock : 2 in
Input and Discharge Hose : 50 ft
Electrical Voltage (AC) : 110 V

Used for Sub Sea Installations of :
J Tube pulls
Jacket pulls
Jumper installations
Mooring line installations
Pipe line pulls
Steel lead Installations
Trees
Tubing head spools

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

------------------------------------------------------------------------------------------------
Search words(for official use only) -

------------------------------------------------------------------------------------------------

Line Pull : 184,770 lbs. At Bare Drum
Cable Capacity : 1½” cable 4,148'
Single Drum Winch : 23,000 lbs
Hydraulic Power Unit (HPU) : 8,500 lbs
Approx. Air Required :
100psi
375 cfm

Water : 80 GPM for heat exchanger
Male Cam Lock : 2 in
Female Cam Lock : 2 in
Input and Discharge Hose : 50 ft
Cable Diameter : 2 in



----------------------------------------------------------------------------------------------------
Search words(for official use only) -  

-----------------------------------------------------------------------------------------------------

Scope of supply

:
Equipment :
  1 Continuous linear winch KTC-240, 240 tonnes @ 1.3 m/min
  2 Hydraulic control modules, itegrated on the KTC-240
  1 PLC control cabinet for the winch command
  1 Control console
Factory testing of the unit
Commissioning and start-up spare parts
Painting and Protective coatings
Tagging
Documentation
DNV witness certificate
Weighing
Preservation, Packing & Marking
Delivery FCA Paris workshop
Operator training
Commissioning and start-up assistance

:
Pulling capacity :
240T @ 0 to 1.3 m/min
115T @ 0 to 2.4 m/min
Operating temperature :
-15°C <T< +50°C (linear winch)
+5°C <T< +40°C (control cabinet and console)
Storage temperature :
-20°C <T< +60°C (linear winch)
-20°C <T< +60°C (control cabinet and console)
Environment : marine, on open deck
Hazardous area : zone 1 IIB T4

:
The blocks are guided along 2 parallel U rails with stainless steel
removable supports and self lubricated interchangeable bearings.
For weight reasons, the frame is built in 2 seperate bolted parts,
and the gripped are removable from the frame.
The linear winch is attached working hanging or rested, horizontally
on deck foundations (yard supply).
Continuous motion.
Strong construction frame.

:
Pull-in capacity (SWL) : 240 metric tones (to be tested during fat)
Speed at up to 240T : 1.3 m/min continuous and adjustable
Speed at up to 130T : 2.4 m/min continuous and adjustable
Oil consumption at maximum speed : 2 × 120 l/min
Pressure at SWL : 290 barg
Back tension at SWL : not required
Jack stroke : 950 mm
Wire rope diameter : 72 mm (with changeable inserts)
Maximum cable dia : 89 m (3" 1/2)
Overall dim : 2.24 m (W) × 8.10 m (L) × 0.80 m (H)
Weight : 23.5 tonnes = 2 ×(6.95 t + 4.8 t)
Design life : 25 years operation

:
The linear winch frame includes 2 hydraulic modules (one for each gripper)
for the synchronization, control and safety of the grippers of the linear winch.
They are mounted and piped on the frame itself. They are suitable to operate
into a hazardous area (Atex zone 1).

:
On the main connections/ tubing it's require with SAE flanges.
On the smaller connections/ tubing where SAE flange won't
be used (10 and 12 mm tubes) it's required with parker EO2
fittings.
The hydraulic connections shall be assembling on one place
(scot plate) for each gripper.
Connections shall be as follow :
Pressure : 5/4" bsp male
Return : 1.1/2" bsp male
Drail : 3/4" bsp male
LS : 1/4" bsp male

:
The winch is supplied with the PLC control and command,
necessary for its full control and located remotely to the
winch. It is suitable for hazardous area (Zone 1)

:
It will include the following :
316L stainless steel panel, 3 mm (385 mm (H) × 540 mm (W)
Synoptic panel
Control buttons & lamps
Linear winch
Speed potentiometer
Line-pull potentiometer
Button manual / 0 / automatic
Push-buttons for manual speed control
Wedges opening controls
Pull / pay-out selector
Start / stop
Stop buzzer / fault reset
Lamp test
Emergency stop
Pilot lamps :
5" 1/2 Exe screen for cable tension, speed & length displays,
status and faults & alarms displays, and calibration set & preset inputs.
Connection block

:
This order includes a 3rd party FAT witness certificate from DNV.
It includes :
Witness of pressure tests (hydraulic cylinders, piping)
Witness of FAT
Lifting pad-eyes certificate DNV 2.7.3 for offshore handling.
Drop tests and lifting on 2 points are not provided.
Manufacturing documentation review
FAT witness

:
This equipment is designed to be operated on open deck.

:
Quality control is carried out according to ISO 9001-2008.
An ITP is issued during the first month after contract, and progress plan and
reports are regularly controlled.

:
All the necessary documentation ( according to Norsok Z-015)
related to the design, fabrication, testing, inspection and maintenance of the riser
pulling equipment will be provided

----------------------------------------------------------------------------------------------------
Search words :

Linear Winch for Charter
Winch for Sale or Charter
---------------------------------------------------------------------------------------------------

Line Pull : 140,000 lbs. At Bare Drum
Cable Capacity : 1½” cable 4,500'
Single Drum Winch : 23,000 lbs
Hydraulic Power Unit (HPU) : 8,500 lbs
Approx. Air Required : 100psi ; 375 cfm
Water : 80 GPM for heat exchanger
Male Cam Lock : 2 in
Female Cam Lock : 2 in
Input and Discharge Hose : 50 ft
Cable Diameter : 2 in



-------------------------------------------------------------------------------
Search words (for official use only) -  

  ---------------------------------------------------------------------------------

Line Pull : 184,770 lbs. At Bare Drum
Cable Capacity : 1½” cable 4,148'
Single Drum Winch : 25,000 lbs
Hydraulic Power Unit (HPU) : 8,500 lbs
Approx. Air Required :
100psi
375 cfm

Water : 80 GPM for heat exchanger
Male Cam Lock : 2 in
Female Cam Lock : 2 in
Input and Discharge Hose : 50 ft
Cable Diameter : 2 in


-------------------------------------------------------------------------------
Search words (for official use only) -  

---------------------------------------------------------------------------------

Offshore Winches for Rent
JS1500
JS1500 Intermittent Pull Linear Winch for Charter

:

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------
JS1500 for Lease
Winches for Charter -

Lucker Model

JS1500
Rig Winch for Charter

Lucker Model

JS1500 Deep Water Winch
Intermittent Pull Linear Winch for charter

Deepwater Winch for Lease
Marine Deck Winch for Rent

---------------------------------------------------------------------------------

Line Pull : 200,000 lbs. at Bare Drum
Cable Capacity : 2" cable 10,000'

-------------------------------------------------------------------------------
---------------------------------------------------------------------------------

Skagit Model AED 295 - Deep Water Winch for Charter

Offshore Winch for Hire
Single Drum Winch for Lease
Left Hand Single Drum Winch

- 400,000 lbs. at Bare Drum

Line Pull : 400,000 lbs. at Bare Drum
Cable Capacity : 2 1/2" cable 4,874'
Total Estimated Weight without Wire Rope : 82,500 lbs
Approx. Air Required :
100 psi
375 cfm

Water : 80 GPM for heat exchanger
Male Cam Lock : 2 in
Female Cam Lock : 2 in
Input and Discharge Hose : 50 ft
Electrical Voltage (AC) : 110 V

Used for Sub Sea Installations of :
J Tube pulls
Jacket pulls
Jumper installations
Mooring line installations
Pipe line pulls
Steel lead Installations
Trees
Tubing head spools

----------------------------------------------------------------------------------------------------------------------

---------------------------------------------------------------------------------------------------------------------