Driltech D25 Drill Rig for Sale
Used Drilling Rig 2001 Built for Sale

Model : D25 Drill Rig
Manufacturer : Driltech
Year : 2001
Condition : Used

Description :

2001 Drilltech D-25 Drill Rig,
7,100 hours on machine,
Sullair 1000 cfm / 350 psi Air Compressor (2,500 hours since rebuilt)
Newer CAT 3406 Diesel Deck Engine (500 hours since installed 12/2013)
25 GPM Bean Water Pump,
Hammer Lubricator
400' ft of (4-1/2" X 20' X 3-1/2" API Thread) Drill Rod Included
(More Available at an Extra Cost),
2001 Sterling Truck,
Diesel Engine @ 400 HP
39,000 miles
Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

         
         
------------------------------------------------------------------------------------------------------------
Search words(for official use only) :
Driltech D25 Drill Rig for Sale
Used Driltech D25 Drilling Rig
Driltech D25 Drill Rig for Sale in USA
2001 Built Land Drilling Rig for Sale
Driltech Land Drilling Rig for Sale
Driltech 2001 Built Used Drill Rig
-----------------------------------------------------------------------------------------------------------------

National 1320 UE powered by (2) GE 752 traction motors
Type B1 Catheads
Elmagco brake SN #9352

Mast : Inland Steel USA 28B455
Lee C Moore cantelever 1,000,000# hook load 157'
Enclosed box substructure 31.75' setback

1 - 3406 Caterpillar  (cold start)
4 - 399   Caterpillar engines
4 - Synchronos AC generators (600 volt)
2 - Quincey QSI-245 air compressors - 60 hp electric motors

Baylor Thyrig system
Top drive scr

2 - National 12P-160 mud pumps - 2 each GE 752
electric motors pump #2 sn #1272

National - Oilwell C-375 rotary table
Block : National 500 ton
Swivel : Cont. Emsco L8-400
Kelly : 5 1/4" Hex Kelly 45'

Annular  Hydril 13 5/8 5,000 psi
D Rams QOP 13 5/8 10,000 psi
S Ram QOP 13 5/8 10,000 psi
Koomey Type 80 20 bottle precharge system (3,000 psi)
house is on off drillers side of floor.   
Remotes - driller console, ground unit remote     
3"x4" choke manifold system with gauges and manual chokes.9 valves total. 

Varco HP-41 hyd. unit (runs)(1)TW-60 iron roughneck (1) 400H pipe spinners
Wildcat ADS-1 automatic driller
Martin Decker type E weight indicator (1) martin decker E-Totco reader survey tool
    

Doghouse, water, fuel, & mud tanks

3 mud tank system (1115 bbls) 
3 Derrick Flo-line mud cleaners W/(1) 2 cone desander and
(1) 16 cone desilter(1) vacu-flo 1200 degasser
2 8X6X11 100 hp centrifigal pumps for desander and desilter
2 8X6X14 100 hp centrifigal pumps for degasser 2 6X5X14 50 hp charger pumps
2 2X3X13 15 hp centrifigal pumps for trip tank
2 halco low pressure mixing hoppers (9) adjataters on mud tanks
2 water tanks (500 bbls each)(1) fuel tank-20,000 gal(1) heated top and bottom doghouse
Two story parts house
fire box storage - for flammables

Drill pipe : 603 Jts 19.60 S-135 4 1/2IF 19,000 ft
HWDP : 38Jts 49.30 spiral 4 1/2 IF 1170 ft
6 1/2" DC : 12 Jts 91.53 spiral 4 1/2XH 375 ft
8" DC : 10 Jts 150.48 spiral 6 5/8REG 310 ft

Rebuilt 500 ton National top drive PS-149-H

---------------------------------------------------------------------------------------------------------------
Search words (for official use only) :

Specifications and Description

:
The OEM 1,000,000 lb hydraulically elevating mast and winch raising parallelogram
substructure has a 2000 hp rating and can transport in 6 compact loads. Our innovative
design allows our customers to incorporate a 500 Ton Top Drive into the mast. This
allows the rig to be rigged up and rigged down without the removal of the block, top
drive and service loops from the mast.

1. 147’ X 13’-0” X 9’-0” Four legged hydraulically elevating mast with hook loadcapacity of
1,000,000# with 12 lines strung to traveling block.  Mast complete with the following :

1. Material and labor to fabricate one (1) top drive tracks to be incorporated into a OEM 
142’ x 13’x 1000K Mast. OEM to design tracks to work with customer furnished Top Drive and Block.
Tracks to include :

The substructure has a 30’-0” working floor height, a rotary capacity of 100,000 lb and a setback
capacity of 800,000 lb. It is manufactured with a rigid box type design with four diagonal legs to
insure stability with swing type floor.

Model – “Rebuilt” National 1320 UE
Rated Horsepower – 2000
Drilling Line – 1-1/2”
Auxiliary Brake – El Mago 7838
Crown Protection – Crown-0-Matic
Power – Two (2) New DC Motors 752 (1000 hp each intermittent, 750 hp continuous)
Brake Radiator – Heat Exchangers & Brake Circulation Tank

- B.O.P Handling System – Tracking beams mounted in the substructure with
Ingersol-Rand 50 Ton B.O.P. Handling System.
- 12’ Headache Rack
- Rig Floor Stairways – All stairs to meet OSHA standards with no slip grip
strut stair treads.
Three (3) 30’-0” stairways from substructure floor to ground level.
Stairs to be built on a 45-degree angle.
One (1) 20’-6” stairway from top of the substructure to top of trip tank.
Stairs to be built on a 45-degree angle.

Traveling Block, API loads rating: 500 ton, sheave groove 1 3/8”; number of sheaves : 6.

7500 ft of 1 3/8” class 6 x 19 EIPS-IWRC cable c/w hospel and air operated drill line spooler

:
A.
One (1) Ross Hill SCR. The system will be manufactured, designed and equipped to control
and power the following loads:
- Four (4) A/C Engine/generator sets
- One (1) 2000 hp Drawworks, driven by two (2) x 1000 hp (Series) DC Motors
- Three (3) x 1600 hp Mud Pumps, each driven by two (2) x 1000 hp (Series) DC Motors.
- Independent Rotary Drive powered by one (1) 1000 hp (Series) DC Motor.
- Top Drive Feeder

Heavy Duty explosion proof Fluorescent and Mercury Vapor Lightning System designed to
use with Mast and Substructure, Mud System, complete with Plug, Receptacles, Cable,
Cable Clamps and all necessary Leads and fitting.  Lighting System consist of: Mast and
Racking Platform, Substructure Lighting, Mud Tanks and Mud Pumps, and Utility House,
including Battery emergency light at Driller’s console certified for Class 1 Division 2.

Engine/Generators – Four (4) New Mustang/Caterpillar Model 3512C with Direct Injection
Turbocharged and Separate Circuit After cooled Land Electric Diesel Engine, Rated 1476 H.P.
at 1200 R.P.M. 2007 EPA Non-Road Emission Certified, with the following standard
attachments as listed below :
-
Aftercooler core, corrosion resistant
Air cleaner, regular duty, with soot filter
Service indicators
-
ADEM II or US Equivalent Electronic engine control, left hand.
Requires 24V DC 10 amp continuous, 20 amp intermittent, clean electrical power.
- :
Outlet controlled thermostat and housing
Jacket water pump gear driven
Dual outlet
Aftercooler fresh water cooling pump (SCAC), gear driven centrifugal.
SCAC pump circuit contains a thermostat to keep the aftercooler coolant from
falling below 30 deg C (85 F).
- Exhaust fittings, flexible, 203 mm (8 in)
Exhaust flange, weldable, 356 mm (12 in)
Exhaust manifolds, dry
Dual turbochargers with w/c bearings
- Flywheel, SAE No. 00
Flywheel housing, SAE No. 00
SAE standard rotation
-
Fuel filter
Fuel transfer pump
Flexible fuel lines
Fuel priming pump, left hand
Electronically controlled unit injectors
- Electronic Instrument Panel, left hand
Analog gauges with digital display data for :
-- Engine oil pressure gauge
-- Engine water temperature gauge
-- Fuel pressure gauge
-- System DC voltage gauge
-- Air inlet restriction gauge
-- Exhaust temperature (prior to turbochargers) gauge
-- Fuel filter differential pressure gauge
-- Oil filter differential pressure gauge
-- Service meter (digital display only)
-- Tachometer (digital display only)
-- Instantaneous fuel consumption (digital display only)
-- Total fuel consumed (digital display only)
-- Engine start-stop (off, auto start, manual start, cooldown timer)
- Crankcase breather, Oil cooler, Oil filter, Shallow oil pan
Oil pan drain valve, 2' NPT female connection
Lubricating oil, SAE 10W30, Caterpillar DEO (CG4) 643L or equivalent.
-
Rails, mounting, floor type, 254 mm (10 in)
- Accessory Drives
Upper RH, Lower left-hand Front (available for PTO usage)
Front Housing, Two-sided
-
-- ADEM II or Equivalent monitoring system provides engine de-ration, alarm, or shutdown
strategies to protect against adverse operating conditions. Selected parameters are
customer programmable.
-- Status available on engine-mounted instrument panel and can be broadcast through the
optional customer communications module or programmable relay control modules(s).
Initially set as follows :
Safety shutoff protection, electrical – oil pressure, water temperature, overspeed, crankcase
pressure, and aftercooler temperature.
Air inlet shutoff, activated on overspeed or emergency stop.
Alarms, electrical – ECM voltage, oil pressure, water temperature (low and high), overspeed,
crankcase pressure, aftercooler temperature, low water level (sensor is optional attachment),
air inlet restriction, exhaust stack temperature, filter differential pressure (oil and fuel).

:
High water temperature, Crankcase pressure, Aftercooler  temperature, Air inlet restriction,
Altitude, Exhaust temperature.
Emergency stop push button, located on instrument panel.
Alarm switches (oil pressure and water temperature) for connection to customer supplied alarm
panel.  Unwired.

Air starting motor, right hand, 620 to 1034 kPa (90 to 150 psi), left hand control.
Air silencer

Paint, Caterpillar Yellow
Vibration damper and guard
Lifting eyes

– Caterpillar SR4B 1750 KVA or Volvo generator, two bearing,
1225 KW, 867 frame, .7 PF, 600 volt complete with Stator RTD’s, Space heater,
Bus bar and cable access box
- – Conventional style Split Core Radiator (56 sq. ft.) with two circuits for engine
jacket water and after-cooler. Includes: 78” Blower fan, fan drive, fan pulleys, belt guard, fan
guard, fuel cooler and Water connections.
- Master Skids – Three (3) Three-runner oilfield type skids (40’ x 10’-0” x 18”) with loading
hitches on both ends for tail boarding. Skids to consist of the following:
Completely covered with ¼” check plate
Drilled and tapped plates for removable arched type roof connections.
Drilled and tapped plates for removal of engine pony skid.
- – Removable arched type roofs (38’-0” x 10’-0” x 12”). Roofs to consist of the following :
Six (6) T.S. 4” x 4” x ¼” support legs with bolt hole patterns to fit tapped holes on skids.
Leg supports complete with square tubing diagonal supports for stabilization.
Two (2) hinged channel running the length of the roof to prevent rain run off. Channels
cut in 5’-0” sections for easy handling and located between each engine package.

:
a..
i. Table complete with :
1. HMB Hinged Pin Drive Master Bushing complete with:
-- a. API No.3 (33) insert bowl, bit breaker adapter plate and sling for 37 ½”
2. No. 1 bowl for 13 3/8” and 11 ¾” pipe
3. No. 2 bowl for 10 ¾” and 9 5/8” pipe
4. 37 RPH Kelly Bushing complete with wrenchless wiper assembly for 5 ¼” Hex.
5. 3 ½” RPH/RSH Square Kelly Roller Assembly
6. Split casing bushing for 37 ½”
7. 20” Casing slip complete with buttons
8. 13 3/8” CL Casing slip complete with buttons
9. 9 5/8” CL Casing slip complete with buttons
10. 5 ½” RDL Extra long rotary slip complete with inserts
11. 3 ½” x 2 7/8” medium long rotary slip complete with inserts
12. Rotating speed: 0-200 RPM

i. Independent rotary drive complete with:
-- 1. National C-700 transmission
-- 2. “Rebuilt” 752 traction motor.

i. Model 8050AC-712, 800 hp
ii. Local Blower System
iii. Control Console complete with Advanced Diagnostic System
iv. TD Support Unit – Standard Compact
v. Electrical Interface Materials for TDSU Applications
-- 1. TDSU Supply Cables
vi. Torque Guide
vii. Services – Self Contained
viii. Interface Materials – Mechanical
-- 1. Crown Hangar
-- 2. Harpoon
-- 3. Torque Reaction Assembly
ix. Control Valve Configuration
-- 1. Tool Joint and Stabbing Guide Kit
-- 2. Remote Actuated lower well control valve assembly complete assembly
M & M Valve and Canrig Actuator
x. Accessories
-- 1. Tool Kit
-- 2. OPT – Mast Raising Interface
xi. Rig Specific Top Drive Interface
xii. Rig Specific Torque Guide Interface

:
a.
-- i. Three (3) “New” Gardner Denver PZ-11 1600 Triplex Mud Pumps, 1600 hp,
Liners 6 ¼” x 10”, 600 gpm each @ 3300 psi driven by 6 each GE-752, 1000 hp
traction motors, furnished with :
1. Unitized on a two-runner oilfield type skid with loading hitches on both ends for tailboarding.
2. Steel traction motor subbase with two (2) adjustable motor base plates.
3. Two (2) “Rebuilt” 752 Series wound DC traction motors. Each motor to include a 15 hp
Blower and junction box with lock out switch.
4. High pressure pulsation dampener, 5000 psi.
5. 3” Relief Valve, manual reset, 1500-5000 PSI with flange connection.
6. SPM meter (0-200)
7. Pressure gauge, 0-5000 PSI range with flange connection.
8. Pressure and Suction Manifold
9. Discharge strainer block.
10. Suction Strainer.
11. Centrifugal charging pump 6 x 8 with mechanical seal and hard iron material, all mounted
on a mission fabricated steel base with woods style coupling, OSHA type coupling guard
and a 75 hp 1750 RPM, 3 PH, 230/460 Volt, 60 Hz explosion proof electric motor.

- OEM to completely
fabricate tanks (40’ x 10’-6” x 7’-0”) on a three runner oil field type skid (50’ x 7’-10” x 8”) with
loading hitches on both ends for tail boarding. Tanks to have internal ladders to each compartment,
equipment supports, fold down type handrails and covered with galvanizes bar grating. Mud system
to consists of the following :

1.
-- a. 10’-0’’ compartment
-- b. One (1) 8” cleanout with butterfly valve.
-- c. One (1) overflow
2.
-- a. 10’-0 compartment
-- b. One (1) 8” cleanout with butterfly valve.
-- c. One (1) overflow
-- d. One (1) 6” suction line from 5 x 6 centrifugal pump.
-- e. One (1) 10” equalizer. Bottom mounted with top mounted handle.
3.
-- a. 10’-0’’ compartment
-- b. One (1) 8” cleanout with butterfly valve.
-- c. One (1) overflow
-- d. One (1) 6’’ suction line from 5 x 6 centrifugal pump.
-- e. One (1) 10” equalizer. Bottom mounted with top mounted handle.
4.
-- a. 10’-0’’ compartment
-- b. One (1) 8” cleanout with butterfly valve.
-- c. One (1) overflow
-- d. One (1) 10” bottom equalizer and one (1) top equalizer.
-- e. Equipment supports for one (1) 15 hp agitator
5. -- a. Able to accept two (2) 6 x 8 centrifugal pumps
-- b. 10” equalizer line to Suction Tank.
-- c. 10” Ditch Connection to Suction Tank.
-- d. Covered with ¼’’ Chk’d floor plate.
-- e. Overhead plated roof.
6.
-- a. One (1) 1” diameter x 25’ long valved water wash down hose.
-- b. One (1) Water connection to desilter trough.
-- c. One (1) Water connection to desander trough.
-- d. 16” x 18” mud ditch with dump gates to each compartment.

1. -- a. 15’ – 0’’ compartment
-- b. One (1) 8” cleanout with butterfly valve.
-- c. Three (3) 6” suction lines going to main mud pumps.
-- d. Equipment supports for one (1) 15 hp agitators.
2.
-- a. 15’ – 0’’ compartment
-- b. One (1) 8” cleanout with butterfly valve.
-- c. Three (3) 6” suction lines going to main mud pumps. Each line independent for each pump.
-- d. Equipment supports for one (1) 15 hp agitators.
3. -- a. 10’-0’’ compartment.
-- b. One (1) 8” cleanout with butterfly valve.
-- c. One (1) 10” equalizer. Bottom mounted with top mounted handle.
-- d. One (1) overflow
-- e. Equipment supports for one (1) 15 hp agitator
4. -- a. Able to accept two (2) 5 x 6 centrifugal pumps.
-- b. 6’’ line to both pumps
-- c. One (1) discharge dumping line
........ i. Pill Tank
........ii. Suction Tank.
5.
-- a. One (1) 1” diameter x 25’ long valved water wash down hose
-- b. 16” x 18” mud ditch with dump gates to each compartment.

1.
-- a. 20’ – 0’’ compartment
-- b. One (1) 8” cleanout with butterfly valve.
-- c. Two (2) 6” suction lines going to main mud pumps.
-- d. Equipment supports for two (2) 10 hp agitators.
2.
-- a. 20’ – 0’’ compartment
-- b. One (1) 8” cleanout with butterfly valve.
-- c. Two (2) 6” suction lines going to main mud pumps.
-- d. Equipment supports for two (2) 10 hp agitators.
3.
-- a. Able to accept two (2) 5x6 centrifugal pumps.
-- b. 6’’ line to both pumps
4.
-- a. One (1) 1” diameter x 25’ long valved water wash down hose.
-- b. 16” x 18” mud ditch with dump gates to each compartment.

1. 7’-10” wide x 20’ long with two (2) high shear 6” mud hoppers mounted
and piping to the suction and reserve tank

1. Three slide for shaker. Slide to mount to the side of the tank and fold down
during transportation. Slide complete with 6” pipe end for hose hook up in the field.
2. Single slide for desander. Slide to mount to the side of the tank and fold down
during transportation. Slide complete with 6” pipe end for hose hook up in the field.
3. Single slide for desilter. Slide to mount to the side of the tank and fold down
during transportation. Slide complete with 6” pipe end for hose hook up in the field.
4. Fold down type walkways. Walkways around shaker area complete with galvanized
grating and removable handrails. Walkways to fold down during transport.
5. Two (2) Stairways. Stairways fabricated from top of mud tanks down to ground level.
6. Roofing System.  All mud puts to be covered with arch type roofing system that
will telescope down during transportation.

1. Six (6) 5 x 6 centrifugal pumps with mechanical seals and hard iron material, all
mounted on a fabricated steel base with woods style coupling, OSHA type coupling
guard and a 100 hp 1800 RPM, 3 PH, 230/460 Volt, 60 Hz explosion proof electric motor.
2. Eleven (11) Derrick DE-AG-10 Agitators complete with 10 hp, 1800 RPM explosion
proof C-face motor bolted to a gear box. Including shaft stabilizer, shaft and impeller.
3. Two (2) Derrick DE-AG-15 Agitators complete with 15 hp, 1800 RPM explosion proof
C-face motor bolted to a gear box. Including shaft stabilizer, shaft and impeller.
4. One (1) 3 in 1 1200 GPM Mud Cleaner with Derrick FLC 503 Shaker.
5. Two (2) Hopper with venturi.
6. One (1) Derrick Vacuum degasser 1200 GPM. Skid mounted with heavy duty 3 hp
explosion proof 230/460 volt, 60 Hz, 3 Ph, 1800 RPM motor and manual starter with heavy
duty vacuum pump.
7. Three (3) Derrick Flo-Line Cleaner 503, 3-panel high G  Shale Shakers with Weir Feed
complete with
three panel screen frame, support structure, and explosion proof electrics with the following
options :
- a. A.W.D. (+7 deg uphill to –1 deg downhill)
- b. Standard Screen Underflow hopper
- c. Weir Feed
- d. Super G Vibrations Motors
- e. Single side tensioning system

i. Combo skid to be fabricated on a three-runner oilfield type skid with loading hitches on
both ends for tailboarding. Skid to include the following :
1. Trip Tank – One (1) 100 bbl trip tank. Tank to include the following :
-- a. Galvanized grating on top of tank.
-- b. Skid porch with provisions for mounting :
........ i. One (1) 2 x 3 x 30 hp centrifugal pump
2. Brake Water Tank – One (1) break water tank. Tank to have the following :
-- a. Tank bottoms to be 3/8” plate.
-- b. Tanks constructed with ¼” v-crimp.
-- c. Tank rims to be 4” square tubing.
-- d. Top of tanks, overhead walkway, top of skid covered with ¼” plate.
-- e. Cleanout, access ladder, and man way
f. Provisions to mount :
....... i. Two (2) 2 x 3 x 25 H.P. centrifugal pumps
........ii. Heat exchanger
........iii. Safety alarm package.

-- i. Mud gas seperator complete with:
......1. 48” Pipe with weld caps on both ends.
......2. Internal baffles.
......3. All piping and pipe brackets.
......4. Gas buster to elevate to working condition to allow operation under half full conditions.
......5. Gas buster to be mounted in lay down position for transport and to be raised by
truck for operation.

:
a. (New Manufactured in Accordance to API 16A specifications, Latest Edition
Nace MR-01-75 and ISO 9001 Quality Systems Temperature Class “T-20” API Monigrammed)

Control Flow Type “S”
13-5/8” 5,000 PSI (BX-160) Studded Top
13-5/8” 10,000 PSI (BX-159) Flanged Bottom
316 SS Lined Rig Grooves, H2S
Complete with seal kit and nitrile element

Control Flow Type “U”
Hydraulic Operated / Manual Locks
13-5/8” 10,000 PSI (BX-159) Flanged Top
13-5/8” 10,000 PSI (BX-159) Flanged Bottom

Control Flow Type “U”
Hydraulic Operated / Manual Locks
13-5/8” 10,000 PSI (BX-159) Flanged Top
13-5/8” 10,000 PSI (BX-159) Flanged Bottom
Two (2) 4-1/16” 10,000 PSI (BX-155) Flanged Outlets
316 SS Lined Rig Grooves, H2S
Complete with Handwheels, “U” Joints and Stem Assemblies
(Less RAMS)

Drilling Spool, Type, “D”
13-5/8” 10,000 PSI (BX-154) Flanged Top
13-5/8” 10,000 PSI (BX-154) Flanged Bottom
Two (2) 4-1/16” 10,000 PSI WP Flanged Outlets
BX-154,SSRG

Data Books

  - 7 station closing unit with 2 remotes,
1 each 150’ and 1 each 60’ umbilical for 10K Stack.
-- i. 24 each new 11 gallon accumulator
-- ii. 3 each new 60:1 pneumatic pumps
-- iii. 1 each new triplex pump with 1 ¼” plungers
-- iv. 1 each new 30 hp Motor
-- v. 1 each new Barksdale electric hydraulic pressure control switch.
-- vi. 2 each new 1500 PSI pressure regulators
-- vii. 7 each new 1” Barksdale selector valves
-- viii. 1 each new 1” Barksdale bypass valve (high/low pressure)
-- ix. 8 each new 3 x 4 air cylinders (select valves)
-- x. 3 each new 6” glycerin filled pressure gauges (1 x 3000psi, 2 x 6000psi)
-- xi. 1 each new pneumatic/hydraulic pressure switch
-- xii. 3 each new directional check valves (1 x 1”, 2 x ½”)
-- xiii. 2 each new 3500 psi pressure relief valves
-- xiv. 1 each 16-function fixed plate
-- xv. 5 each new 1” 3000 psi ball valves
-- xvi. 1 each new moisture separator and oiler (air inlet)

- Choke and Kill Manifold Assembly, Kill Line Valve Assembly, and Choke Line
Valve Assembly
- (3) Gate Valve, 4-1/16''10,000psi, Cameron Style, FC, Manually Operated.
- Gate Valve, 4-1/16'' 10,000psi, Hydraulicly Operated, DFC
- (9) Gate Valve, 2 1/16" 10,000psi, Cameron Style, Manually Operated, Flanged End
- Studded Cross, 2 X 2 X 2 X 2, 10,000psi
- Studded 5-Way Cross, 4-1/16" 10,000psi X 4-1/16" 10,000psi X 2-1/16"
10,000psi X 2-1/16" 10,000psi X 2-1/16" 10,000psi, with B7 Studs and Grade 2H Nuts.
- Spacer Spool, 2 1/16" 10,000psi Flanged x 2 1/16" 10,000psi flanged.
- Adapter Spool, 2-1/16" 10,000psi, Flanged End X 2-9/16"10,000psi, Flanged End.
- Check Valve, 2-1/16" 10,000psi, DVI, Model R, DD Trim, Temperature Class P-U,
PSL 2, PR1, Flanged End.
- Adjustable Choke, 2-1/16" 10,000psi, DVI, Model H2, Manually Operated, EE Trim,
Temperature Class P-U, PSL 2, PR1, 2" Maximum Orifice, Flanged End, Stainless Steel
Lined Ring Grooves.
- Double Studded Adapter, 2-9/16" 10,000psi X 2-1/16" 10,000psi, with B7 Studs and Grade
2H Nuts.
- Double Studded Adapter, 4-1/16" 10,000psi X 2-1/16" with B7 Studs and Grade 2H Nuts.
- Hydraulic Choke, 2-9/16'' 10,000psi, SWACO Style, Super Choke, EE Trim , Temp Class
P-U, Flanged End with Stainless Steel Lined Ring Grooves.
- Spacer Spool, 4-1/16" 10,000psi X 4-1/16" 10,000psi 12" Tall.
- Buffer Tank Assembly, Shell Test 15,000psi, Working Pressure 10,000psi,Main Tube 9"
OD X 7" ID 4130 Mechanical Tubing, with two 4-1/16" 5,000psi Studded End Caps, two 2-1/16"
10,000psi. Flanged Inlets, One 4-1/16" 10,000psi Flanged Inlet connected to a 4-1/16" 5,000psi
Flanged Outlet by utilizing 6" OD X 4" ID Tube that isolates this" Panic Line" from the remainder
of the buffer tank, Two 2-1/16" 5,000psi Extended Flanged Outlet. Heat Treated.
- Flanged Mud Gauge, 2 1/16" 10,000psi, Cameron Style, Model F, Range 0-10,000psi.
- (2) Adapter Flange, 2-1/16", 10,000psi X 2" Figure 1502 Female Threaded Half with Seal.
- (2) Blind Flange, 4-1/16" 5,000psi.
- Blind Flange, 2-1/16" 10,000psi
- (2) Target Flange, 2-1/16'' 5,000psi, Lead Filled.
- Blankin Plug, 2-1/16'' 10,000psi X 1502 Union, Male Half.
- Hammer Nut, 2'' 1502 Union
- (5) Ring Gasket, BX155, Stainless Steel.
- (19) Ring Gasket BX152, Stainless Steel
- (2) Ring Gasket RX153
- (2) Ring Gasket R39 Stainless Steel
- (88) Stud, 3/4'' X 5-1/2'' B7, w/ 2 Grade 2H Nuts Each,2-1/16" 10M
- (24) Stud, 1-1/8'' X 8- 1/4'', B7 w/ 2 Grade 2H Nuts Each, 4-1/16" 10M
(24) Stud, 7/8'' X 6-1/4'' B7, w/ 2 Grade 2H Nuts, 2-9/16" 10M, 2-1/16" 5M

:
a. -- i. Two (2) Gardner Denver, ST-50, Electra-Saver II, rotary screw air compressor,
Model EBE99Q. 50 hp, 460 volts, 3 phase, 60 HZ, TEFC, with NEMA 4 Control Enclosure.
-- ii. Two (2) Steel Fab, 400 gallon, vertical air receivers with full skirt, 200 psi working pressure.
Part # A12614. Unit is California Coded.
-- iii. One (1) Gardner Denver – 9 hp Cold Start.
-- iv. One (1) RNC250 air dryer for 250 CFM.

– Two main rig hoists for rig floor.
-- i. Ram Winch Model K5UL20MX1G – 8000lb Rig Winch
-- ii. Ram Winch Model K5UR50DML14AM1G – 5000 lb. Man Rider Winch.

-- i. Derrickman winch, 2500 lbs working capacity.

-- i. Ingersol-Rand- 50 Ton BOP Handling System consisting of 2-25 Ton Air Hoists equipped
with hand geared trolleys, 30’ of lift.

:
a.
Totco Double Recording Drift 0 to  and 0 to 8° and 0 to 14°. Clock complete with following :
-- i. 1 ea. Godevil Kit
-- ii. 1 ea. Chart tool & Chart Reader
-- iii. 1 ea. Tool Maintenance Box w/ Tool
-- iv. 100 ea. Chart 0 to 8° and 0 to 14°
-- v. 10 ea. Rubber Finger Stabilizer
-- vi. Fishing Tool 7 rope sockets

EMS-2 or Equivalent Rotary Torque indicator, Weight indicator, and Tong torque gauge,
Circulating pressure gauge, two (2) ea. Pump stroke counter.

EMS-2 or Equivalent Drilling recorder, 9 pen (weight, torque, penetration rate, pump pressure,
rotary rpm). (Diameter 103 Dan Kurang 6 Buah Printed Circuit Board).

EMS-2 or Equivalent Pit volume totalizer, single channel with audio alarm and warning lights,
four pit transmitters totalizing relay, gain and loss gauge with gauge zero devices. Full digital
instrumentations.

EMS-2 or Equivalent Device complete with recorder and alarm system

:
a.
-- i. Material and labor to fabricate one (1) accumulator/pipe bend skid as per our conversations.
OEM to fabricate a three runner oilfield type skid (40’ x 10’ x 12”) covered with ¼” check plate.
Pipe bend fabricated out of customer furnished drill pipe. Piping to be done during rig up. Skids
complete with :
.......1. One (1) arched type roof with T.S. 4”x4”x ¼” legs and gussets plates welded on roof and
flooring for support
.......2. Mounting supports for one (1) accumulator

-- i. Material and labor to fabricate one (1) 500 bbl water tank as per our conversation. Tanks
fabricated on oilfield type skids with loading hitches on both ends for tailboarding. Skid ends to
be covered with ¼” check plate. Tanks complete with the following :
.......1. Two (2) 3 x 2 x 11 Centrifugal pumps with 25 hp Motors
.......2. Suction and Discharge Piping.
.......3. Two (2) ladder rung to top of tank (In and Out)
.......4. 4” Fill cap
.......5. 2” Outlet

-- i. Material and labor to fabricate two (2) 12,000 gallon fuel tank as per our conversation. Tanks
fabricated on oilfield type skids with loading hitches on both ends for tailboarding. Skid ends to be
covered with ¼” check plate. Tanks complete with the following :
.......1. Two (2) fuel transfer pumps
.......2. One (1) filter system.
.......3. Suction and Discharge Piping.
.......4. Two (2) ladder rung to top of tank (In and Out)
.......5. Top and Side man ways, 4” Fill cap, 2” Outlet, and 1 ½” Drain

i. Material and labor to fabricate one (1) Warehouse/Workshop. Shop fabricated on oilfield type
skids with loading hitches on both ends for tailboarding. Skid to be covered with ¼” check plate.
Workshop complete with the following :
.......1. Work Table
.......2. Work Bench
.......3. Storage Compartments
.......4. Storage Shelves.

-- i. Material and labor to fabricate one (1) lot of cable trays as per the following: Cable trays
to be fabricated as follows :
.......1. Two (1) 40’-0” sections from substructure to fuel tank
.......2. One (1) 35’-0” section from mud tanks to main tray
.......3. One (1) 20’-0” section from substructure to main stairs
-- ii. Cable trays complete with the following:
.......1. Hinged doors in 5’-0” sections with chain for each doorway
.......2. Flat expanded metal running the length of each tray
.......3. ½” round bar at each end of cable tray to provide protection when pulling wires

-- i. Three (3) 3 ½” x 12’ long, 5000 psi wp with 4” welded connections. For connection
of mud pumps to substructure high pressure line

-- i. One (1) 3 ½” x 75’, 5000 psi wp with 4” welded connections. Complete with safety
clamps,chains and hammer unions on each end.

-- i. Five Star surveyor wireline unit with 15 hp, 1800 rpm, 480 volt, 3-phase, 60 HZ
Explosion proof motor, complete with one (1) line guard , counter and 20,000’ of .108 wireline.

:
a. :
-- i. Mast and Substructure
.......1. Mast accessories.
.......2. Install flooring, handrails, v-door, stairs, etc.
.......3. Fabricate and install flow line.
-- ii. Rotary Table and independent drive
-- iii. Drawworks
-- iv. Doghouse
-- v. SCR control panel, foot pedal and drawworks console.
-- vi. Mud Pumps
-- vii. Brake water/trip tank
-- viii. Fuel Tanks
-- ix. Cable Trays
-- x. Engine package.
-- xi. Accumulator/Junk basket

-- i. Water Supply to:
.......1. Rig Floor
.......2. Brake water system
.......3. Feed and return lines from brake water tank to drawworks drum and brake.
-- ii. Fuel System
.......1. Feed and return lines from tank to engine set.
-- iii. Air System
.......1. Air Supply for accumulator unit and rig floor
.......2. Hose connections from rig floor air manifold to drawworks control console and air hoist.
.......3. Miscellaneous
........... a. Two (2) rig floor air hoists and stands.

-- i. Supply and Install single standpipe, standpipe manifold and all necessary high-pressure
lines and hoses.
-- ii. Cameron or equivalent 5000 psi wp singe stand pipe manifold complete with gate valves,
pressure gauge of 5000 psi rating and other standard fittings.
-- iii. 5” x 5000 psi wp single stand pipe of suitable length with clamps installed on the off-drillers
side. Complete with gooseneck, hammer union or unibolt couplings for making up a rotary hose
with the safety clamp attached. All weld type fittings.
-- iv. 5” x 5000 psi wp single stand pipe manifold  with connections for pressure gauge, kill line,
cellar jet line with two (2) 2” x 5000# valves and one (1) 5000 psi pressure gauge. All welded
type fittings.
-- v. Rig pump delivery manifold shall be connected to the vibrator hoses through a rigidly
supported strainer cross.
-- vi. A 5000 psi working pressure gate valve on each mud delivery manifold. From each pump
delivery manifold, a suitable bleed line and valve should be provided.
-- vii. Necessary anchoring arrangement of all high-pressure delivery lines to be provided.

e .......i. Provide lube products to all machinery.
.......ii. Provide Fuel for testing
.......iii. Run air compressors.
.......iv. Pressure test all high pressure lines and connections to working pressure
.......v. Load test generators
.......vi. Test all SCR assignments.

f. i. Rig down and assist in load out on customer furnished trucks. All packing to be done by others.

All manufacturers’ warranties will be included with the rig upon delivery.

A. Rig Skidding System – Skidding System Designed to skid a maximum of 105 linear feet.
-- b. Material and labor to fabricate one (1) hydraulic skidding structure. Each structure designed
per the following :
i.
.......1. Each section designed to “leap frog” during skidding and pin.
.......2. Skidding package designed to drill at any location. Section to have opening location for mousehole.
.......3. Each section to have cross bracing and diagonal bracing to maintain rigidity.
.......4. Each section designed with “claw-grooves” every 2’-2” with fabricated flanges.
.......5. Each section complete with four way lifting assembly.
ii.
.......1. Each claw complete with reversible jack claw for movement in the forward and reverse direction.
iii.
.......1. 11” bore x 30” stroke x 3000 psi, single stage, double acting.
iv.
.......1. Beam clamps designed to secure substructure to skidding structure during drilling operations.
v.
.......1. Four (4) guide plate pins and padeyes.
.......2. Two (2) Beam supports for top drive house
.......3. Two (2) beam supports for hydraulic power unit
.......4. Two (2) beam supports for brake water cooling unit.
.......5. Extensions for :
- V-door ramp
- Four (4) Sets of stairways
.......6. Three (3) stair supports for skidding.
.......7. Drag chain assembly for all rig water, air and electrical lines with all electrical lines,
piping and hoses for rig skidding operations
.......8. Six (6) Pipe stands for return mud to active mud system
.......9. 100 linear feet of the following piping :
- Return mud to active system
- High pressure piping
- Water and Mud piping to trip tank unit
.......10. Adjustable Shaker skid mounted on top of trip tank

---------------------------------------------------------------------------------------------------------------
Search words (for official use only) :

1500 HP SCR Drilling Rig for Sale

Specifications

Built in 2007
15,000' to 18,000' drilling capacity

:
NOV-1500 UE, SN : 106-001, (2) Amerimex motors, (2) Amerimex
blowers, (2) blower motors (1) GE motor PN: 5KE215CC105AP,
(1) Emerson motor PN : AB34, (2) Chatheads, Foster PN: CH3000

:
New 142' x 25' DSI, 1,000,000lb static hook load, 600,000lb setback,
API includes racking board wind walls.

:
New 30' DSI box on box with rotary capacity at 1,000,000lb and a
600,000lb setback, API, including catwalks, stairs, pipe racks and
V-door, one (1) Quadco Hercules deadline anchor, model 131T, rated
capacity 100,000, certified proof test pull 150,000, wind walls.

:
(2) New Weatherford MP16 mud pumps, 1600hp, (4) Amerimex motors
independently powered traction motors. Pumps complete with all plumbing,
pulsation dampeners and 6 x 5 x11 Five Star charge pumps with (2) Emerson
50hp 1200rpm electric motors.

:
(3) New 9'7"H x 10'W x 45'L mud tanks (1500bbls), tanks to have necessary
piping, valves, dump gates and compartments, tank to have necessary
connections for (1) new derrick 2-cone desander, (1) new derrick 16 cone desilter,
(2) new derrick FLC-504 liner shakers, (8) new mud agitators with 10hp motors
(1) 5hp on pill tank, agitator, all motors have been replaced, (2) 6 x 5 x 12
centrifugal pumps 100hp motor, (2) 6 x 8 x 12, 100hp motor, connections to hook
up all pumps to mud pits included.

:
(1) New independently driven 27 1/2" rotary table, (1) eliminator cooling blower,
(1) Amerimex motor, (1) Marathon oil pump, (1) oil cooler, (1) SL 450-5 swivel,
(1) HD kelly pin drive bushing, (1) kelly spinner.

:
(1) New National DG-450 hook 500lb ton, (1) New National YC-450 block 500lb
ton, (1) new set of 500 ton 132' jay link.

:
(1) Remanufacture hydril MPS 20¾ 3000 x 20 50 RS, Annular BOP, (1) Remanufacture,
Cameron type U, 20" x 3000 psi double ram preventer, (1) New BOP lines suitcase.

: One New (1) National-Ross Hill model 1400, for 3 generator x 4 SCR system.

:
(3) New Caterpillar 3512-C 1800 rpm diesel engines with 1225kw 1750kva, 600 volt
generators, (3) generators mounted on 10'W x 35'L x 9'H skids, (2) Tescorp 30hp screw
type compressors, (1) Five Star cold start compressor, (1) Five Star air receiver, 240
gallons with relief valve and gauge mounted in engine house, (2) new air receiver, 80
gallons, with pressure relief valve and gauge both mounted on substructure.

:
New drillers top doghouse 9'H x 8'6"W x 40'L with heater, (5) individual lockers, (1)
heavy duty storage locker, (1) heavy duty slop top table, (1) glass covered cork board.

:
(1) new Five Star wireline unit with .108" wire line, (2) remanufacture Ingersol-Rand air
winches, misc. (1) set of new handling tools, mud bucket, DC safety clamp slips - 2 sets
DP and 2 sets DC's elevators - 2 sets, (2) pipe spinner, (3) rotary hose, (4) rotary hose.

:
(1) pump pressure gauge, (1) tong line pull gauge, (1) rotary table torque indicator, (1)
DC AMP 0-1000 AMPs gauge, cabinet by NOV, (9) indicator lights for Gan 1-3, SCR
1-4, ground fault, MPI blower, MP2 blower, DW blower, RT B1WR, power, purge loss,
power limit meter, controls for mud pumps 1 and 2, drawworks, rotary table, (3) 125 psi
control air valves, air supply switch, air cylinder, protector adjust power supply for BC,
pressure gauge for drawworks, speed shift gauge, high/low drum clutch gauge, lubrication
oil pressure, water pressure drawworks gauge, indicator brake for drawworks, gear shift
switch, rotary indicator brake, high/low drum clutch switch.

--------------------------------------------------------------------------------
Search words (for official use only) :

Cabot 900 Series Self Propelled Drilling Rig
Self Propelled Drilling Rig

Specifications

Drawworks :
Cabot Model 2346 with 12" x 46" brake rims and 60,000# single line pull.
Lebus type grooved drum for 1-1/8" wireline with turn back rollers

Power :
2 CAT 3408 475hp each, equipped with Allison CLBT-6061 torque converter
transmissions with bendix V-1000 (24 CMF air compressor)

Mast :
Cabot 117', 350,000# SHL, telescoping structural mast, hydraulic raised and
retracted mast

Substructure :
Cabot 'T' type 17'h scoping substructure, 450,000# setback capacity

Brake :
Parmac V-80 break with overrunning clutch with driller air pressure control for
break modulation control

Rotary Table : National 27 1/2" rotary table

Swivel : Oilwell PC-225, 225 ton swivel

Blocks : 300 ton 4 sheave 8 line with spring hook

Mud Pumps :
2011 Weatherford 1600hp Triplex powered by Detroit 16V-2000 Gardner Denver
PZ8 with CAT D398B motor

Steel Mud Pits :
3 tank 700 barrel skid mounted mud system. 2 derrick 500 series shale shakers.
Wired to meet API electrical standards. Desanders and desilters.

Mud Mixing Pump : 50hp electric mixer 5 x 6 x 14

Drill Collars : 12-6 1/4" x 2 1/4" x 31'

Kelly : 40' - 4 1/4 HEX with roller bushings

Light Plant :
Generac SD500KW powered by 600hp Volvo 16.0 DTA with 455KW CAT SR-5
powered by CAT 3456

B.O.P : Hydrill 11 x 5000# stack including annular and double rams

Accumulator :
5 valve 8 bottle 3000#, electric with air pumps and remote doghouse controls
Kelly Spinner ; N.O.V hydraulic forward and reverse
Automatic Driller : Pason-Satellite
Recorder : Pason - Martin Decker 3 pin
Water Tank : 500 barrel
Water Pump : 3" Honda
Power Tongs : NA
Cathead : Hydraulic
Elevators : 4" BN. 5 1/2" , 7", 8 5/8" casing
Slips : 4" DP. 6" DC. 5 1/2" , 7", 8 5/8" casing
Shale Shakers : 2 derrick 500 series flowline shakers
Desandser : 10" 2 cone with 50hp electric motor

Special Equipment :
TIW valve, doghouse, 20' steel skidded supply/storage building and supplies-tools,
valves, liners, supplies, pullers, electrical parts.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

--------------------------------------------------------------------------------------------------------------------------
Search words (for official use only) - 
Cabot 900 Drilling Rig
Used Cabot 900 series Drilling Rig For Sale
Drilling Rig - Cabot 900
Used Cabot Rig For Sale
--------------------------------------------------------------------------------------------------------------------------

Used National 1320 UE SCR Drilling Rig

:
National 1320 UE powered by (2) GE 1,000 HP Electric Motors
Type B1 Catheads
Elmagco Brake

Mast - Inland Steel USA 28B455
Enclosed Box Substructure - 31.75'  Setback

1 - 3406 Caterpillar (Cold Start)
4 - 399 Caterpillar Engines
4 - Synchronos AC Generators (600 Volt)
2 - Quincey QSI-245 Air Compressors - 60 HP Electric Motors

Baylor Thyrig System
Top Drive Scr

2 - National 12P-160 Mud Pumps - 2 each GE 1,000 HP Electric Motors

National - Oilwell C-375 Rotarty Table
Block - National 500 Ton
Swivel - Cont. Emsco L8-400
Kelly - 5 1/4" Hex Kelly 45'

Annular - Hydril, 13 5/8, 5000psi
D Rams - QOP, 13 5/8, 10000psi
S Ram - QOP, 13 5/8, 10000psi

-
Type 80,
20 Bottle Precharge System (3,000psi) house is on
off drillers side of floor

Remotes - Driller console, Ground Unit Remote

3” x 4” choke manifold system with gauges and manual
chokes 9 valves total

Wildcat ADS-1 Automatic Driller
Martin Decker Type E Weight Indicator(1)martin decker E-Totco Reader
survey tool

3 Mud Tank System (1115 bbls)
3 Derrick Flo-line Mud Cleaners W/(1) 2 cone desander and (1) 16 cone
desilter(1) vacu-flo 1200 degasser

603 Jts
19.60
S-135
4 1/2IF
19,000 ft


38Jts
49.30
Spiral
4 1/2 IF
1170 ft

12 Jts
91.53
Spiral
4 1/2Xh
375 ft


10 Jts
150.48
Spiral
6 5/8 Reg
310 ft

---------------------------------------------------------------------------------------------
Search words (for official use only) :
2000HP SCR Drilling Rig for Sale
Land Drilling Rig - National 1320 UE - For Sale
Used National 1320 UE SCR Drilling Rig

Manufacturer : Speedstar
Year : 1974
Condition : Used

Search words(for official use only) :
Land Drilling Rig for  Sale in USA

Driltech T25K5W Drill Rig for Sale
Used Drilling Rig 2007 Built for Sale

Model : T25K5W Drill Rig
Manufacturer : Driltech
Year : 2007
Condition : Used

Description :

2007 Driltech T25K5W Drill Rig,
Sullair 1000 cfm / 350 psi Air Compressor,
Cummins QSX15 (new ECM) Diesel Deck Engine,
Hammer Lubricator,
Water Injection Pump,
700' ft of 4-1/2" drill pipe & basic tooling included,
Side Pipe Rack,
4 Hydraulic Leveling Jacks,
Mounted on a Sterling Truck,
Mercedes Diesel Engine,
Eaton Fuller 8LL Speed Transmission,
Location : USA

Price & terms : Please enquire using the email form below.    

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

         

-----------------------------------------------------------------------------------------------------------------------------------
Search words(for official use only) :
Driltech T25K5W Drill Rig for Sale
Drilling Rig - Driltech T25K5W- for Sale
Used Driltech T25K5W drilling rig for Sale
2007 Built Drilling Rig for Sale  in USA
Used Drilling Rig - 2007 built Driltech T25K5W
Land Drilling Rig for Sale - 2007 built
Driltech Drilling Rig for Sale in USA
------------------------------------------------------------------------------------------------------------------------------------------------

Speedstar 275 DSI Quik-Drill Rig for Sale
Quik-Drill 275 DSI Rig for Sale
Used Drilling Rig for sale
Drilling Rig - Quik-Drill 275 DSI - 1989 Built

Model : 275 DSI Quik-Drill Rig
Manufacturer : Speedstar
Year : 1989
Condition : Used

Description : 

1989 Speedstar DSI Quik-Drill Rig,
(Armstrong Machine Re-manned) Gardner Denver 5x6 Mud Pump,
Ingersol-Rand 175 cfm / 150 psi Air Compressor,
300' ft Of Drill Pipe (Mayhew Jr.) & basic tooling included,
Newer Drive Pumps & Top Head Motor installed in mid-2013,
Mounted on a 1983 International S-2800 Truck 4x4
Diesel Engine
Air Brakes
Located : USA

Price & terms : Please enquire using the email form below.      

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.



--------------------------------------------------------------------------------------------------------------
Search words(for official use only) :
Speedstar 275 DSI Quik-Drill Rig for Sale
Quik-Drill 275 DSI Rig for Sale
Drilling Rig - Quik-Drill 275 DSI - For Sale
1989 Built Drilling Rig for sale
Speedstar Land Drilling Rig For Sale
Used Drilling Rig - 1989 built Quik-Drill 275 DSI
Used Speedstar 275 DSI Drilling Rig for Sale
-------------------------------------------------------------------------------------------------------------------

Cardwell 50MT R2 workover rig for Sale
Used Workover Rig
80 Ton Workover Rig for Sale
Workover Rig for Sale - Cardwell 50MT R2

:
The rig is capable for undertaking work over operations in Oil / Gas /
Injection / Effluent disposal wells /CBM wells etc. up to depth of
2500 mts approximately with tubing string of 2-7/8" to 3-1/2" in 5" to
9 5/8" casings, depending on the weight of completion equipment.
The work over jobs include but are not limited to servicing/ installation
of artificial lift equipment, cleaning of well bore, gravel packing, sand
screening, stimulation, well abandonment, transfer of horizons, water
shut off, gas shut off, water injection profile modification and
re-completion, retrieval of gravel pack assembly, fishing & releasing of
stuck up, multi-layer resting, casing repair etc. in vertical / deviated /
horizontal / multilateral / ERD / USRD wells, etc.

Cardwell, USA make, model KB-200C, self propelled, Back-in-type,
mobile workover cum drilling rig accommodated on heavy duty carrier
having hook load capacity of 80 T. The rig is equipped with the following
technical features :

a) :
4 leg leaning type, Hydraulically telescoping, two section, foldable,
Cardwell make, Model 96-180, Mast with clear height of 96 ft. from
ground level and rated static hook load capacity 80 T with 6 lines strung
on traveling block. The mast is designed as per latest API 4E/4F standard
code and practice. The Mast can is equipped with suitable Finger Board
which can accommodate 2500 mts of range-II, 2 7/8"/3 ½” tubulars in
doubles.

The draw works is powered by 1 no. of "DETROIT DIESEL" make, model
8V-92T diesel engine of 450 HP at 2100 rpm with ALLISION make, heavy
duty transmission consists of torque converter, model "CLBT 4860" and
suitable power trend  through compound/chain drive and gear boxes.
i)We will provide the Hook and tackle system for the rig and capable
to operate 2-7/8" to 3- 1/2" tubing and 2-7/8" to 3-1/2" drill pipes up to the
required depth.

The rig is capable to handle 2500 Mts. 2 7/8 " Drill pipes including 3 1/2"
and 4 3/4" drill collars with 3 1/2" IF connection or Drill Collar 4 3/4" with
3 1/2" IF connection, in doubles.

:
Simplex make, sub-structure having a overall height of 15 ft, clear height
of 12', rated simultaneous set back capacity of 125 T. The sub-structure
is suitable to accommodate 17.5" Rotary Table and completed with tong
back up post for rig tongs, railing, stairway and wings etc. The sub-structure
is having sufficient working area and space for racking the rated length of
tubulars. The substructure is manufactured as per API 4E/4F.

:
Rotary table with 17.5" opening without master bushing and having static
load capacity-295 tonnes. The table is completed with master bushing
and kelly bushing. The rotary table is driven by chain-sprocket and the
mechanism is powered by the drawworks.

:
3" face square/hexagonal kelly of 40' length having 6 5/8" API Regular
Box connection on top bottom connection 2 7/8” IF PIN. The working
pressure rating 5000 PSI.

:
Rotary swivel having sufficient static/dead load capacity and working
pressure rating 5000 psi and completed with bail bumper support, goose
neck connection to rotary hose etc.

:
Winch with suitable hand braking system with hoses, wireline etc..
Pulling capacity - 3 Metric tonne, completed with hydraulic/pneumatic
motor- 1 (one) no.

7.1 (a) :
Triplex slush pump rated at 350/500 HP, unitized to a "CUMMINS"
Make or Caterpillar make or Detroit  make or equivalent diesel engine
having suitable HP, through belt drive compound and 5 speed heavy
duty gear box and air clutch. Mounted on a steel oil field skid. ,
20 gallon, 5000 PSI pulsation dampener.

a) Rotary hose 3" dia., with suitable connection to connect stand pipe
and swivel.

i) 2 nos. of tank, total capacity 80 cum mud system mounted on skid.
ii) Tanks are equipped with 2 no. 7.5 HP mud agitator.
iii) Tanks will have all the necessary lines for the hooper system, suction
system and gunning system.
iv) The mud system is complete with necessary piping gate valve and
system piping to handle the fluid.
v) Necessary system lines.
vi) 1 no. calibrated hooper complete with flameproof electric motor driven
centrifugal pump, butterfly valve, piping etc,.

:
Sufficient fuel storage to undertake the workover operations without
interruptions.

:
Tank with storage Capacity of 40 m3 equipped with transfer pump of
suitable capacity with necessary hook up.

:
The following well control equipment shall be provided :
a) Hydraulically operated Cameron / Shaffer/ Hydril make, one double
ram type Blow Out Preventor of 7-1/16" X 5000 PSI working pressure
having one set of blind ram and one set pipe rams to handle size 3-1/2"
and 2-7/8".

:
Rigidly supported 2-1/16" x 5000 psi choke and kill manifold completed with
2 nos. 2 1/16” x 5000 psi master valve , 1 no. 2 1/16” x 5000 psi flow line valve
and 5 nos. 2 9/16” x 5000 psi WP flow arm valve, 1 (one) no. manually operated
adjustable choke and 1 (one) no. fixed choke pressure gauge and all standard
fittings like "T" and crosses, the choke and kill manifold will be mounted on steel
oil field skid.

:
a) Center latch elevator for minimum 50MT capacity and minimum 01 no. for
each category will be provided

2-7/8” / Upset Tubings
2-7/8” / Plain Tubings
3-1/2” / Plain Tubings
2-7/8” / I.F Drill Pipe
3-1/2” / I.F Drill Pipe
3-1/2” / Upset Tubing

b) Elevator links :
Elevator links-forged as per API 8C, rated capacity-minimum 50 MT, size
1-3/4"x72" will be provided. Qty-1 set

:
Bit subs, cross over subs and all necessary subs to handle work with 2-7/8" &
3-1/2" tubing and drill pipe string or their combinations will be provided.

:
a) Deadline weight indicator with sensator / load cell on driller console/control
panel, indicating load on hook for the designed capacity of the rig.

:
I. Explosion proof rig lighting at all hazardous locations as per Indian Oil Mines
Regulation in force.

:
Drill pipes 2-7/8" OD IF Right Hand, G grade of 10.4 ppf, premium Class I,
Range II not less than 2500 mtrs length will be provided along with latest
NDT certificate.

:
The following equipment will also be provided :
a) Air system: Independent air compressor system of suitable capacity'
with air tank for operating pneumatic Cellar pump. Hydraulic pump of
BOP control unit etc.
b) POL store.
c) Rig In-charge Office.
d) One bunk house for Contractor's operating personnel.
e) V door & cat walk with pipe racks on both sides.
f) Cellar pump- Air operated (Pneumatic) with suction hose of sufficient
length shall be provided by the contractor.
g) Gen set (two nos) of sufficient capacity for continuous round the clock
operation including motors of auxiliary equipments, other electrical equipments
like air conditioner, fan, blower etc. and illumination of working area etc.
Illumination of Drill site area to be provided as per OMR-1984 and its
amendments from time to time.

----------------------------------------------------------------------------------------------------
Search words(for official use only) :
80 Ton Cardwell 50MT R2 Workover Rig
Land Rig for Sale
Cardwell 50MT R2 - 80 Ton - For Sale in India----------------------------------------------------------------------------------------------------

1998 Ingersoll-Rand T3W DH (Deep Hole)
CAT 3406 Deck Engine (9,000 Hours)
30,000 Lbs of Pullback
IR 900 CFM @ 350 PSI Air Compressor
18,000 Lbs Winch
High Torque Head
Diesel Preheater (Works)
9 GPM Bean Water Injection
Hammer Oiler
7 Rod Carousel Standing
260' ft of Side Carousel Lay-Down
Installed : New Pullback Cylinder, Head Rollers, And Sheave Bushings Less Than 150 hr ago
1,000’ ft of (3 ½ API X 20') Drill Pipe & Basic Tooling Included

Mounted on an International 2674 Truck

CAT C-10 Diesel Engine @ 310 HP
10 Speed Transmission
Jake Brakes
Rear Lockers
25,000 miles as of 7-1-2012
20k Front Axel 40k Rear Axel

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

 

for Sale
Used Drilling Rig Built 1986 

---------------------------------------------------------------------------------------------
For Sale
1986

Ingersoll-Rand T4W Drill Rig

For Sale
Used Drilling Rig

Ingersoll-Rand T4W

for Sale
Land Drilling Rig Built 1986 for Sale in USA

550hp Workover Rig for Sale
2008 built Workover Rig
Used Workover Rig

Service Conditions :
The rig  is capable for undertaking work over operations in Oil/ Gas /
Injection / Effluent disposal wells/CBM wells etc. up to depth of 3000 mts
approximately with tubing string of 2 7/8" to 3-1/2" in 5" to 9 5/8" casings,
depending on the weight of completion equipment. The work over jobs
include but are not limited to servicing/ installation of artificial lift equipment,
cleaning of well bore, gravel packing, sand screening, stimulation, well
abandonment, transfer of horizons, water shut off, gas shut off, water
injection profile modification and re-completion, retrieval of gravel pack
assembly, fishing & releasing of stuck up, multi-layer testing, casing
repair etc. in vertical/deviated/horizontal multilateral / ERD / USRD wells etc.

1. Workover Rig
The Rig XJ 550 is a brand new self propelled rig and capable of workover
/ testing / completion/service upto 5800m using 2 7/8 " drill pipe and  and
4500m using 3 1/2" drill pipe. The rig is having the hook load capacity of
135 ton and manufactured as per latest API standards applicable in the
oilfield Industry.

The rig is equipped with :
a) Four leg leaning type, Hydraulically telescoping, two section, foldable,
SJ Petroleum Machinery Co., China make, Model JJ135/34 Mast with
clear height of 112 ft from ground level and rated static hook load capacity
135 T with 8 lines strung on traveling block.

The mast is designed as per latest API 4E/4F standard code and practice.
The Mast can is equipped with suitable Finger Board which can accommodate
5200 mts of range-II, 2 7/8" tubulars in doubles. 

b) Twin safety device (floor-o-matic and crown-o-matic) is available.
c) Top man escape device will be provided.
d) Suitable locking system would be provided with additional safety manual
lock for telescoping of mast to full height.
e) The mast is designed to withstand wind speed of minimum 60 knots as per
Clause 6.2.3 of API 4F with full pipe/ setback with all guy ropes properly placed
as per standard API pattern.
f) Hydraulic Cat works :
For make up & breakout consisting of hydraulic make up (spinning) cylinder
providing 10000lbs (4444kg) minimum line pull and hydraulic break out cylinder
to develop a minimum line pull of 20000lbs. Control for make up & breakout is
located at Driller's console.
g) Draw works with suitable rating for handling 100MT hook load capacity,
equipped with suitable auxiliary hydromatic brake for safe running in of the string.
The Draw works should have sufficient range of forward speed and one reverse
speed.

XJ 550 Draw Work Input HP rating 550 HP. Nominal depth rating 2000 mts with
tubing, fitted with compatible mechanical brake system and driven by a suitable
Detroit make diesel engine. Draw works having 4 forward and one reverse speed.
Draw works drum having main drum Lebus Groove for 1 1/8” line. Main drum
brake having maximum wrap around feature energizing type brake. Crown-o-matic
protection device to protect the Crown is also provided.
g) The draw works is powered by 1 no. of "CATERPILLAR"make, model
C-15 ACERT diesel engine of 540 HP at 2100 rpm with ALLISION make, heavy
duty transmission consists of torque converter, model "M5610AR" and suitable
power trend  through compound/chain drive and gear boxes.

The power pack is perfectly suitable for effective hook load of 135 MT and to work
on 5000m deep well. The power pack is completed with standard gauges, meter,
safety equipment and spark arrestor. Engine is equipped with independent
interlock pneumatically operated starting system during the workover mode and
the electric starting system during the roading.

h) SJ Petroleum Machinery Co. make Model "YG-150"hydrahook with combination
block having 4 nos. of sheavesof 30" diameter. The hook has built in hydraulic
snubber,conventional rotation lock and safety positioner etc.,rated capacity is
150 tonne and is capable to operate 2-7/8" to 3-1/2" tubing and 2-7/8" to 3-1/2"
drill pipes up to required depth.

j) Racking Board is of adjustable type and completed with topman emergency
escape device from monkey board to  ground, railings & safety belts. The Racking
Board is having sufficient provision to rack 3 1/2" / 2 7/8" tubulars/drill pipes for
5000m Drill pipe/ 6000m tubing and having provision for height adjustment at three
different convenient positions.

2. Substructure
S J Petroleum  make Sub-Structure,made as per API-4F rigid type, completed
with all respect to carry out drilling jobs, 13' below the rotary beam.  Substructure
having sufficient space to accommodate the 3 stack BOP (one Pipe Ram + One
Blind Ram+ one Annular) with riser nipple in workover mode. The structure is
completed with rotary beam, railing,side platform, setback area and stair way.
The sub-structure can accommodate 17 ½” Rotary Table on it.

3. Rotary Equipment
SJ Petroleum Machinery Co., China make, Model "ZP175"or equivalent rotary
table with 17.5" opening without master bushing.

The table is completed with master bushingand kelly bushing.The rotary table is
driven by chain-sprocket and the mechanism is powered by the drawworks.

4. Kelly
40 feet Square / hexagonal Kelly 3" size as per API 7 suitable for working upto
350 kg / cm2 (5000 psi) working pressure with required connections along-with
saver subs will be provided. Upper and lower Kelly cock of suitable size with
pressure rating of 5000 psi will also be available.

5. Swivel
a) SJ Petroleum Machinery Co., make, Model "SL-135", rotary swivel having
static/dead load capacity of 135 tonnes and working pressure rating 5000 psi
and completed with bail bumper support, goose neck connection to rotary
hose etc. Swivel bottom pin connection 6 5/8" API regular left hand.

(b) With 3” diameter quick change goose neck assembly with working pressure
5000 psi.

6. Hydraulic Winch
The Rig is provided with minimum 1 no. of hydraulic winch with catline for
handling tubulars having pulling capacity not less than 3MT.

7. Mud System
Mud system is capable to handle drilling mud Sp. Gr. upto approximately 1.8.

7.1 Mud Pump
(a) BOMCO China Make, model "F-500" triplex slush pump rated at 500 HP,
unitized to a reputed Make diesel engine having sufficient capacity, through
belt drive compound with shaft or chain drive is acceptable and 5 speed heavy
duty gear box with Centrifugal supercharging pump, having pulsation dampener,
safety relief valve, pressure gauge etc.

Mounted on a steel oil field skid, 20 gallon, heavy duty Type-F 6000 psi mud
gauge,  Pumps dressed with 3 1/2" to 6" liners as per operational requirement.
 
The pump is capable of handling work over operation in 5 1/2"casing with 2 7/8"
tubular upto a depth of 6500 mts. with mud of specific gravity- 2.3.

(b) Capacity of Pump
Discharge : Minimum   12 cbm / hr. at 5000 psi.
Minimum   52 M3 / hr. at 2000 psi.

7.2 Discharge System
a) Rotary hose of suitable size having working pressure of 350 Kg/Cm2 (5000 psi)
with suitable connections will be provided.
b) Suitable end connections of suction line and delivery manifold will be provided.
c) Stand pipe of suitable size and pressure rating along with pressure gauge is
also present.

7.3 Mud/Work over fluid storage/ Handling arrangement
i) Tanks having capacity (volume) not less than 80 cubic meter with permanent
level markings from bottom will be provided.
ii)  Arrangement is provided for brine/mud preparation, mud mixing, mud agitators
/ bottom gun jets of best engineering
iii) Transfer pump for working fluid / mud from tankers into tank and tank
to tank and back to tanker (if required) along with pumping system.
iv) Necessary system lines wherever required.
v) Calibrated mud hopper of suitable size with butterfly valve and proper line
connection will be provided with gunning arrangement.
vi) One trip tank of approximately 8 m3 with suitable connections and valves
will be available. It will be equipped with sufficient capacity of centrifugal transfer
pump & motor suitable for hazardous area.
vii) Skid mounted / portable filtration unit for brine to get the out let brine solution
of 5 micron quality at flow rate 40M3/hr at working pressure 10Kg/cm2 after fine
filter with suitable motor for hazardous area .

8. Fuel Storage
Sufficient fuel storage to undertake the workover operations will be provided

9. Water Storage
Tank with storage Capacity of 40 m3 equipped with transfer pump of suitable
capacity with necessary hook up lines/ system will be provided.

10. Well Control Equipment

The following well control equipment will be provided :

a) Hydraulically operated Cameron / Shaffer / Hydril make, one double ram type
Blow Out Preventor of 7-1/16" X 5000 PSI working pressure having one set of blind
ram and one set pipe rams to handle size 3-1/2" and 2-7/8".
b) Hydraulically operated Cameron / Shaffer / Hydril make, one annular Blow
Out Preventor of 7- 1/16"X5000 PSI working pressure.
c) Or one no of 3 stack unitized BOP containing items as mentioned at a) & b) above.
d) One set of stem & wheel for manually closing BOP as per OISD standard-174.
e) One. No of  shanghai shenkai petroleum chemical equipment, 6/8 bottle hydraulic
control unit,     capable of operating the BOP with suitable Pneumatic and electric
motor driven pump. The system pressure is 3000 PSI. Necessary 1" BOP control
hose to connect BOP with control unit.

1 (one) nos., of remote control unit placed on drillers console. Unit will have two
charging systems i.e. Pneumatic and electric with auto start and stop facility.
Flame proof DGMS approved motor will be used. One set of stem and wheel to
operate the BOP mechanically.

f) Adapter flange/ spool/dummy spools of following size will also be  available :-
Change over spool 7-1/16" 5000 psi x 7-1/6" 10000 psi - 1 no

g) 1 no. BOP test plugs or Cup tester/ accessories will also be provided.

h) Plug valves, tubing shut off valve and FOSV of 5000 PSI having necessary
connections and changeovers for 2-7/8" & 3-1/2" NU /EUE tubings/ Drill pipes
will also be provided.

11. Choke and Kill Manifold
Choke & Kill manifold is as per API of size minimum 2-1/16" having minimum
5000 psi WP along with sufficient quantity of flexible steel piping of minimum
5000 psi WP of suitable size fitted with NRV in kill lines. It has a suitable
combination of valves having provision to flow the well through fixed choke,
variable choke and one bypass also. There is also a provision to kill the well
through kill line as well as one additional line for making connection through
cementing.

12. Handling tools as per API 8C
a) Center latch elevator for minimum 100MT capacity and minimum 01 no.
for each category will also be provided.

Sizes
2-7/8" : Upset Tubings
2-7/8" : Plain Tubings
3-1/2" : Plain Tubings
2-7/8" : I.F Drill Pipe
3-1/2" : I.F Drill Pipe
3-1/2" : Upset Tubing

b) Elevator links Elevator links-forged as per API 8C, rated capacity-minimum
100MT, size 1-3/4"x72". qty 2 nos will be provided.

c) Power (Pneumatic) slips
We will provide Light Weight pneumatic slip/spider, with sufficient spares,
inserts suitable for 2-7/8" and 3-1/2" tubing and drill pipes along with all
associated connections, hoses and Couplings. Operating valve at driller's
console.

d) Hydraulic tubing tong (Qty-1)
A Light weight hydraulic tubing tongs as per relevant API for 2 7/8" and 3-1/2"
tubings with replaceable jaws minimum torque rating 8000 ft lbs along with
sufficient spares would be provided.

e) Heavy duty Tong. (Qty-02)
Range 2-3/8" to 4-1/2", and to handle all fishing tools and milling tools as per
relevant API, torque rating minimum 35000 ft-lbs with hanger arrangement
along with sufficient spares will also be provided.

f) Handling Tools for Sucker Rods and Polished Rods
Tongs & elevators for handling 5/8", 3/4", 7/8", 1", 1-1/8" & 1-1/4" sucker rods
and polished rods will be provided.

13) Cross Over Subs
Bit subs, cross over subs and all necessary subs to handle work with 2-7/8" &
3-1/2" tubing and drill pipe string or their combinations will be provided.

14) Rig instrumentation suitable for Hazardous area.
a) Deadline weight indicator with sensator/ load cell on driller console/control panel,
indicating load on hook for the designed capacity of the rig will be provided.
b) Suitable recorder for recording hook load will be provided and it will be mounted
in weight indicator box
c) Mud pump pressure indicator would be complete, on drillers console/control
panel. 0- 6000 PSI.
d) Mud pump pressure gauge is mounted on stand pipe of 0-6000 PSI.
e) SPM indicator for mud pump discharge at drillers console/ local mud pump
control panel.
f) Indicators for B.O.P rams open/close for blindram, pipe rams & annular BOP on
drillers console/control panel is provided.

15. Safety Equipment
The rig is equipped with following fire fighting & safety equipment :
I. Fire fighting system as per OISD standard -189 :-
Para 6.0 i) Fire water storage facilities with fire pump.
ii) Portable Fire extinguishers.
Para 11.0 - Material specification of Fire water system.
Para 12.1 - Fire alarm system.
II. Explosion proof rig lighting at all hazardous locations as per Indian Oil Mines
Regulation in force.
III. Flame proof portable lamps (minimum 2 nos.)
IV. Emergency Kill system for derrick engine (control from driller's panel).
V. Electrical system will have suitable ELR (Earth leakage relay)
VI. First aid box with stretcher facilities as per OISD standards - 204 para 6.5 and 
Annexure - H.
VII. Safety kits & liveries (as per standard statutory body) will be provided for
operating personnel. Top man safety belt also to be provided.
VIII. All the rotating parts must have proper safety Guards.

16. Drill String
a) Drill pipes 2-7/8" OD IF Right Hand, G grade of 10.4 ppf, premium Class I,
Range II, 3000 meter will be provided with rig along with latest NDT certificate.
b) Drill collars of sizes 3-1/2" of total length 50m with cross over to run 2-7/8"
& 3-1/2" drill pipe will be provided.

17. Other Equipments
The following equipment will also be provided :
a) Air system: Air compressor system of suitable capacity with air tank for operating
pneumatic Cellar pump, Hydraulic pump of BOP control unit etc.
b) Rig warehouse and POL store.
c) Rig In-charge Office.
d) One A/C bunk house for coordinator.
e) One bunk house for Contractor's operating personnel.
f) V door & cat walk with pipe racks on both sides.
g) Necessary transport equipment for movement of rig from one location to another.
h) Cellar pump- Air operated (Pneumatic) with suction hose of sufficient length.
i) Circulating head 5000 psi working pressure for 3-1/2" and 2-7/8" Drill pipes and
tubings with necessary change over
j) All trailor mounted equipments including rig trailor will meet the RTO regulation
including Registration
k) POWER GENERATOR: 2 nos. 125 KVA power generators, powered by Kirlosker/
Cummins or  equivalent make diesel engine with "STAMFORD/JYOTI" make alternator
and properly designed control panel for rig
operation and illumination of work area with each other.
l) Sufficient number of suitable flanges, chicksens/ flexible joints and rubber hoses for
making all types of connections for working pressure 5000 psi  will be available,
m) Welding machine/ Welding transformer powered by contractor's Gen Set along with
all associated welding and oxy - acetylene cutting accessories, gases and consumables
etc.
n) Potable water storage, filter and water cooler,
o) One no of red aviation light flickering type fitted with lamp at crown block shall
be available having independent circuit.
p) Mud balance
q) All rig equipments and facilities like bunkhouse store etc. will have effective double
distinct earthing system as per IER 1956.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.



-----------------------------------------------------------------------------------------------------------------------------
Search words (for official use only) :
550hp Workover Rig For Sale in India
Used Workover Land Rig
550 HP Workover Rig For Sale in the Middle East
2008 built Workover Rig for sale in India
Used Workover Land Rig 550 HP For Sale
Land Workover Rig For sale - 2008 built
Workover Rig - 550hp - 2008 built
Used Workover Rig for Sale in the Middle East
-----------------------------------------------------------------------------------------------------------------------------

1994 Ingersoll-Rand DM45E drill rig
(Almost Completely Rebuilt through 2011)
CAT Diesel Engine
IR 900 cfm / 350 psi Air Compressor
Dry Dust Collector
Carousel handles (30' x 5-1/2") Drill Pipes
Heavy Duty Undercarriage
Location : USA

 

1994 Built Drilling Rig

Used Drilling Rig for Sale in USA
Used Drilling Rig 1994 Built for Sale
Land drilling Ingersoll-Rand DM45E for Sale

-----------------------------------------------------------------------------------------------

Speedstar 30K Drilling Rig for Sale
Used Drilling Rig for sale
1985 Speedstar 30K - Drilling Rig for sale

Model : 30K
Manufacturer : Speedstar
Year : 1985
Condition : used

Description :

1985 Speedstar 30K drill rig
Sullair 840 CFM / 350 PSI Air Compressor
Sand Reel, Rod Rack, Carousel
Bean 18 GPM Water Injection Pump
Hammer Lubricator
Rig has 8,084 frame hours
Mounted on a 1985 Loadcraft 6x4 truck
Cummins 475 Twin Turbo (Rebuilt in 1999) & PTO (Power Drill & Truck)
Roadranger Transmission (Rebuilt in 2008)
Newer Rear Tires
New Paint done back in August 2009
400 ft. of used Drill Pipe (20' x 4-1/2" OD) Included
6” DTH Hammer (360) Included
Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

         

---------------------------------------------------------------------------------------------------------
Search words(for official use only) :
Speedstar 30K Drilling Rig for Sale
Drilling Rig 1985 Speedstar 30K - For Sale
1985 built Drilling Rig for sale
Used Drilling Rig - 1985 built Speedstar 30K
Land Drilling Rig For Sale in USA
--------------------------------------------------------------------------------------------------------

Ingersoll-Rand DM25 Used Drilling Rig  For Sale
Used Drilling Rig 1985 Built - for sale

Model : DM25
Manufacturer : Ingersoll-Rand
Year : 1985
Condition : Used

Description : 
1985 Ingersoll-Rand DM25 track drill rig
Multi-Pass
IR 750 cfm / 350 psi air compressor
Cummins Diesel engine
Repacked cylinders on mast
Repacked three (3) leveling jacks
Repacked 3 pumps,
five (5) rod carousel
Dimensions : 36' L x 11' 10" W x 14' 6" H
Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

         

---------------------------------------------------------------------------------------------------------------
Search words(for official use only) :
Ingersoll-Rand DM25 Drilling Rig for Sale 
Used Drilling Rig Ingersoll-Rand DM25 For Sale
1985 Built Drilling Rig for Sale in USA
Used Drilling Rig 1985 built Ingersoll-Rand DM25
Land Drilling Rig For Sale 1985 built
Used Ingersoll-Rand DM25 drilling rig for Sale
-------------------------------------------------------------------------------------------------------------------

:
The rig is capable for undertaking work over operations in Oil / Gas / Injection / Effluent
disposal wells /CBM wells Cardwell, USA make, model KB-200C, self propelled, Back-in-type, mobile workover cum
drilling rig
Simplex make, sub-structure having a overall height of 15 ft, clear height of 12', rated
simultaneous set back IDECO make, Model "LR-175" or equivalent rotary table with 17.5" opening with static load
capacity not less than
"OMSCO" Make or equivalent, 3" face square/hexagonal kelly of 40' length having 6 5/8"
API Regular Box
(a) IDECO make, Model "TL-120", rotary swivel having static/dead load capacity not less
than 75  tons and rotating
IR/BRADEN make, Indian make or china make, hydraulic/air winch with suitable hand
braking system with hoses, Mud system would be able to handle drilling mud Sp. Gr. upto approximately 1.8.

:
a) Gardner Denver Make, model "PZ-8” of 750 HP triplex slush pump, unitized to a
CATERPILLAR make, model :
a) Rotary hose  having working pressure of 350 kg/cm2 (5000 psi) with suitable
connections.
b) Suitable end connection for suction and discharge manifold will be provided.
c) The standpipe is mounted on Mast, equipped with pressure gauge will be mounted
in the rig.

:
i) Tanks, having total pumpable capacity (Volume) not less than 80 cubic meter with
permanent markings from
Sufficient fuel storage to undertake the workover operations without interruptions will
be provided.

The following well control equipment shall be required :
1 (One) no. "Hydril"/“Cameron”/“Shaffer (Shaffer make of NOV)” Make, double ram,
hydraulically operated, 7 1/16" :
One BOP Control unit as per API 16D and of reputed make, 3000 psi working pressure,
hydraulically operated with :
Choke and kill manifold of size minimum 2 1/16” having minimum 5000 psi WP along
with sufficient quantity of a) Center latch elevator for minimum 100MT capacity as per below.

2-7/8” : Upset Tubing
2-7/8” : Plain Tubing
2-7/8” : I.F Drill Pipe
3-1/2” : Upset Tubing
3-1/2” : Plain Tubing
3-1/2” : I.F Drill Pipe

b) :
2 Nos. (One pair/set) forged elevator links, and the size will be as per the standard design of
the rig, rated capacity :
A suitable pneumatic slip complete with sufficient nos. of die inserts for 2 3/8” to 3 ½”
tubulars. The power slip is :
 1 no of light weight hydraulic tubing tings as per relevant API for 2 3/8” to 3 ½” tubing’s
with replaceable jaws :
A suitable Heavy Duty Tong, Range 2-3/8" to 4-1/2", and to handle all fishing tools and
milling tools as per relevant :
Bit subs, cross over subs and all necessary subs to handle work with 2-7/8" &
3-1/2" tubing and  drill pipe string or I. Deadline weight indicator with sensator /load cell on driller console /control panel,
indicating load on hook for
A) Drill Pipes 2-7/8” OD IF, Grade G of 10.4 ppf, premium class-I, Range–II, 3500
meters right hand.
B) Drill Collars : 3 1/2” /  4 3/4”. 5 Nos.


i) V door & cat walk with pipe racks on both sides.
ii) Cellar pump- Air operated (Pneumatic) with suction hose of sufficient length
will be provided by the contractor

----------------------------------------------------------------------------------------------------
Search words(for official use only) :----------------------------------------------------------------------------------------------------

Ingersoll-Rand T3W Drilling Rig for Sale
Used Drilling Rig for sale
1990 built Ingersoll-Rand T3W Drilling Rig for Sale

Model : T3W - Long Tower
Manufacturer : Ingersoll-Rand
Year : 1990
Condition : Used

Description :
1990 Ingersoll-Rand T3W drill rig
IR 900 cfm / 350 psi air compressor (Rebuilt with 2,500+ hours since)
Cummins 855 Diesel Deck Engine at 450 hp (Rebuilt with 800+ hours since)
18 GPM bean water injection pump

pre-heat box (cold weather starter)
400' ft of Used Drill Pipe (20' x 4 1/2") and basic tooling included
36' ft Tower
24,000 lbs pulldown & 26,500 lbs pullback
Mounted on a International Paystar 5000 Truck
Cummins 350 HP
32,000 miles
Location : USA

Price & terms : Please enquire using the email form below.      

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

         
----------------------------------------------------------------------------------------------------------------------
Search words(for official use only) :
Ingersoll-Rand T3W Drilling Rig for Sale
1990 Built Drilling Rig For Sale
Used Ingersoll-Rand T3W - Long Tower Rig For Sale
Used Drilling Rig - 1990 Ingersoll-Rand T3W - Long Tower
Land Drilling Rig For Sale - 1990 Built
------------------------------------------------------------------------------------------------------------------------

Model : T64HB
Manufacturer : Schramm
Year : 1978
Condition : used

     

---------------------------------------------------------------------------------------------------------
Search words(for official use only) :

Used Drilling Rig 1987 Built

Price & terms : Please enquire using the email form below

 

Search Words (for official use only) :
for Sale

Land Drilling Rig for Sale in USA

Used Drilling Rig for Sale in USA 1987 Built

Ingersoll-Rand T3W

Drilling Rig for Sale
Used drilling Rig 1987 Built
-----------------------------------------------------------------------------------------------

Land Drilling Rig -

2000HP Oilwell 2000-E 

for Lease

Drilling Rig for Hire

Oilwell 2000-E (2000 hp)
(2) GE 752 traction motors (1000 hp each)
1 3/8" drill line, Eaton 436 auxillary brake

(3) Caterpillar 3512 engines w/ 1204 kw generators

Nov Ross Hill 1400 3 x 4 SCR house

Dreco 142' w/ 1,000,000 # capacity on 10 lines

Dreco 26' box on box
KB 27' 6" Rotary beam clearance 21' 6"

Continental Emsco (500 ton) block
Web Wilson (500 ton) hook

(2) BOMCO F-1600 (1600 hp each) triplex pumps
Each independently powered by (2) GE 752 traction motors

(3) tank system - 1626 bbl capacity w/ 100 bbl slug pit

Brandt King Cobra dual shaker
Brandt 2-cone desander
Brandt 12-cone desilter
Atomospheric degasser
Mud gas separator
(5) mud agitators

13 5/8" x 5,000 psi Shaffer annular
13 5/8" x 10,000 psi Shaffer double
13 5/8" x 10,000 psi Shaffer single

Koomey 7-station, 264 gallon accumulator

10,000 psi choke manifold

Varco TDS-11-SA (500 ton)

National (27 1/2")

5" drill pipe

8" and 6 1/2" drill collars
"quantity subject to availability

Pason EDR (base system)
Fuel tank - 20,727 gallon capacity
Water tank - (2) 483 barrel capacity each
Rig Manager and crew quarters
NOV IR-3080 iron roughneck
Satellite automatic driller
Kelly spinner
Bronco survey unit
Man rider
Power slips

Price & terms : Please enquire using the email form below.

---------------------------------------------------------------------------------
Land Drilling Rig -

2000HP Oilwell 2000-E

for Lease

---- 

Continental Emsco G.C. 500 for Sale
1000hp Mechanical Land Rig - Used - For Sale
American 1000HP used Land Rig

Drawworks Continental l Emsco :
G.C 500, with double 22’ Parmac Brake with 2
engine compound, with 320 Quincy Air Compressor. Drawworks powered by two C-15
Cat Engines with Twin Disc Torque converters, 2 Hydraulic Cat Heads, 2 Hydraulic
Handling Winches.

Derrick : Lee C Moore 131, 380,000# SHL

Sub Base : 45’L X 14’H X 24’W Lee C. Moore, 500,000 setback

Block : McKissick 4-sheave 1 1/8” groove, Shorty combo Hook

Kelly : 5” X 42’ Hex with Bash Ross Roller Bushing

Rotary Table : Emsco

Mud Pump : (1) F-1000 Triplex with 5 X 6 Mission Charge Pump Powered by Cat 3412
E with Allison 8000 Series 6 Speed Automatic Transmission.

Mud Pump : (2) F-1000 Triplex with 5 X 6 Mission charge Pump, bowered by 398 Cat.

Water Tank : 10’W X 40’L X 8’H 600 BBL

Generator House : 10’W X 40’ X 8’H with 2-400KW Generators powered by C-15
Cat’s, 1- Electric Powered Auxiliary Air compressor

Parts Room : 8’ X 10’

B.O.P. Equipment : 5 Station Closing Unit, 5000 PSI Pipe and Blind Ram’s, 3000 PSI
Annular B.O.P., 5000PSI Choke Manifold.

Pit System : 38’L X 11’6”W X 6’H Suction Pit 470 BBLS. (1) 30’L X 11’6”W X 7’6”H
Shale Pit 470 BBLS Total Pit System 940 BBL with 2-5 X 6 Mission, Electric Powered
Centrifugals. (3) Electric Pit Agitators. (2) Linear Shale Shakers (2) Cone De-Sanders (2)
Mud Hoppers (4) Hydraulic Mud Agitators (1) Degasser 3’ X 12’

Top Doghouse : 8’WX 30”L X 7’6”H, (4) Pen Drilling Recorder, Wild Cat Auto Driller

Fuel Tank : 10,000 Gal Skidded

Change House : 10’ X 15’

Drill Pipe : 10,000 feet double white band 4 1/2 X- Hole

Drill Collars : (14) 6” X 61/4” All Handling Tools for D.P to D.C.

Tool Pusher House : 14’ X 55’

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------------------------------------
Search words(for official use only) -
Continental Emsco GC 500 for Sale
American 1000HP used Land Rig
American Used Land Rigs for sale - 1000HP
Continental Emsco Used Land Rig - 1000HP
US built Used 1000HP Drilling Rig
10000feet Land Rig - Used - For Sale
1000hp Used Land Rig Fro sale - Mechanical
Continental Used 10,500feet Drilling Rig For sale in USA
--------------------------------------------------------------------------------------------------------------------------------