Used Ideco H37 Rig For sale Mechanical Drilling Rig - IDECO H37 6500’ For sale
Derrick National Double Derrick Scope Up (New RAM) Bottom section 33-1/2 feet > 89 Ft Working room Top section 56 feet - 91 feet overall
Drawworks Double drum – IDECO H37 All bearings have been checked, new brake pads CAT Engine, 550 hp, 0 time – Brand new, with Allison Transmission. Draw works trailer-mounted 3 New Tandem Axels – New Brakes and air lines tires steel radials – 20 inch Substructure 6’6” tall trailer-mounted with cat walk, 12’ sub-structure at rotary table level Ramp 5 ft tall. Catwalk & rotary table trailer-mounted 2 axel tandem, new axels, tires and airlines
Mud Pumps (1)Wilson Snider 6” X 16” Stroke 12893 (2)Wheland 7 1/2” Liners X 14” Stroke p/b Cummings 350 hp engine, (3)Gardner Denver FXK 1952 6” X 14” Stroke p/b CAT 500 hp engine API Fluid End Traveling blocks BJ – 460 ton w/ 6 lines Swivel – REWSTE 4 Sx Water Pump 4” X 6” Stroke Gardner Denver FXG 137 Gallon fuel tank mounted on pump Skid – Powered by 3 cylinder Detroit diesel Rotary table, National 12-1/2” Water Tank 8’W X 8’D X 38-1/2” L – 400 barrel tank Top Dog House Double wall insulated 8’ W X 35’ L - 40 all over Bottom Dog House 7’10” W X 23’10” L Mud Pit 4’ deep X 7’ W X 40’ L Generator, CAT powered. To see more information and pictures, please see http://www.worldoils.com/landrigs/rig250.php Price & terms : Please enquire using the email form below.
If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you.
We can arrange delivery of equipment and towage of rigs and vessels where needed.
The details mentioned above are believed to be accurate but are not guaranteed. ------------------------------------------------------------------- Search words(for official use only) : Land rig - 550hp for sale 550hp Drilling Rig for sale Ideco H37 Drilling Rig For sale Ideco H37 for sale Mechanical Drilling Rig for sale -------------------------------------------------------------------
Schramm T64HB Drilling Rig for Sale Drilling Rig - Schramm T64HB - For Sale Model : T64HB Drill Rig Manufacturer : Schramm Year : 1978 Condition : Used Description : 1978 Schramm T64HB Drill Rig Detroit 8V92 Diesel Deck Engine Sullair 750 cfm / 350 psi Air Compressor SN: 1274 Bean Water Injection Hammer Lubricator Updated Spool Valves 240 Ft of Drill Pipe included Mounted on a Peterbilt Truck Cummins Diesel Engine 15 Speed Transmission Air Controls Need Adjustment Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. --------------------------------------------------------------------------------------------------------- Search words (for official use only) : 1978 Built Schramm T64HB Drilling Rig for Sale Schramm T64HB Drilling Rig - 1978 Built for Sale Used Schramm T64HB Drilling Rig for Sale Schramm T64HB Used Land Drilling Rig for Sale Schramm T64HB Drilling Rig for Sale in USA -------------------------------------------------------------------------------------------------------
Ingersoll-Rand TH60 Drilling Rig for Sale Drilling Rig - Ingersoll-Rand TH60 - For Sale Model : TH60 Drill Rig Manufacturer : Ingersoll-Rand Condition : Used Description : Ingersoll-Rand TH60 Drill Rig Mounted on a 1999 Paystar 5000 International Truck CAT C12 Diesel Engine TH60 was completely rebuilt in 2011 500 cfm / 250 psi Air Compressor 3-inch Rod Carousel with 250 feet of Drill Rods Winch Dust Control System Water Injection Pump Enclosed Operator Cab Drill and Engine 4925 hours Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. --------------------------------------------------------------------------------------------------------------------------- Search words (for official use only) : Used Ingersoll-Rand TH60 Drilling Rig for Sale Ingersoll-Rand TH60 Drilling Rig - 2011 Rebuilt for Sale Ingersoll-Rand TH60 Used Drilling Rig for Sale 2011 Rebuilt Ingersoll-Rand TH60 Drilling Rig for Sale Ingersoll-Rand TH60 Drilling Rig for Sale in USA --------------------------------------------------------------------------------------------------------------------------------------
CME 55 Drilling Rig for Sale Drilling Rig - CME 55 - For Sale Model : 55 Drill Rig Manufacturer : CME Drill Year : 1973 Condition : Used Description : 1973 CME 55 Drill Rig Mounted on a 1980s Ardco Model K Carrier Both Rig and Carrier Powered by Ford 300 CID Gasoline Engines Equipped with a Single Wireline Winch Moyno 3L6 Pump Included Previously Transported with a RAM 3500 Tooling available Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. ---------------------------------------------------------------------------------------------------------------------- Search words (for official use only) : 1973 Built CME 55 Drilling Rig for Sale CME 55 Drilling Rig - 1973 Built for Sale Used CME 55 Drilling Rig for Sale CME 55 Used Drilling Rig for Sale CME 55 Drilling Rig for Sale in USA -------------------------------------------------------------------------------------------------------------------------
Reichdrill T650 Drillling Rig for Sale Reichdrill T650 Drillling Rig - 1985 Built for Sale
Model : T650 Drill Rig Manufacturer : Reichdrill Year : 1985 Condition : Used
Description :
1985 Reichdrill T650 Drilll Rig Detroit Silver 8V92TA Diesel Deck Engine (new in 2012) Sullair 840 cfm / 350 psi air compressor Sliding angle mast / tower – set up for mineral exploration and allows tracking at angle without additional boom. Note : One new drill quill sub remove the side inlet swivel, it actually set up to switch easily to do water wells Retractable 4” Bull hose Reel Bean water injection pump 50,000 lbs of pullback Cyclone - 800 ft of Matrix 4.5” drill rods (cost extra) Mounted on a Ford 9000 Truck Detroit 8V92 diesel engine 13 speed transmission Jake brakes Note : There were about 5 drills built using the T4 control panel Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. -------------------------------------------------------------------------------------------------------------------------------- Search words (for official use only) : 1985 Built Reichdrill T650 Drillling Rig for Sale Used Reichdrill T650 Drillling Rig for Sale Drillling Rig - Reichdrill T650 - For Sale Reichdrill T650 Used Land Drillling Rig for Sale Reichdrill T650 Drillling Rig for Sale in USA -----------------------------------------------------------------------------------------------------------------------------------
Chicago Pneumatic T650 WS Drilling Rig For Sale Used Drilling Rig - Chicago Pneumatic - For Sale Model : T650 WS Drill Rig Manufacturer : Chicago Pneumatic Year : 1979 Condition : Used Description : 1979 Chicago Pneumatic T650WS Drill Rig GHH 825 cfm / 300 psi Air Compressor Caterpillar 3406B Diesel Deck Engine 6-Rod Carousel Set Up for 4-1/2" x 20 ft Drill Pipe Rod Rack Hydraulic Leveling Jacks 12,000 lbs Sandline Hammer Lubricator Mounted on a Ford 8000 Truck - VIN #U80QVEC65I9 Caterpillar 3208 Diesel Engine 73,246 Miles Showing on Odometer Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. ------------------------------------------------------------------------------------------------------------------------------- Search words (for official use only) : Chicago Pneumatic T650 WS Drilling Rig - 1979 Built - For Sale 1979 Built Chicago Pneumatic T650 WS Drilling Rig for Sale Used Chicago Pneumatic Drilling Rig Chicago Pneumatic Used Drilling Rig for Sale Chicago Pneumatic T650 WS Drilling Rig for Sale in USA ---------------------------------------------------------------------------------------------------------------------------------
Hydraulic Land Drilling Rig for Sale New Hydraulic Land Drilling Rig - 1000hp 1000hp Hydraulic Land Drilling Rig New Land Drilling Rigs for Sale
Specifications Mast (Telescopic Mast) Max. hook load : 100tn (200,000 lbs) Stroke length : 16.4 m (53.8 ft) Total height incl. substructure : 26 m (85ft) Drilling axis : 800 mm (31.5 in) Substructure & Drill floor - Self-erecting (trailer-based) Drill floor height : 5 m (16.4 ft) Clear height below drill floor : 4.1 m (13.5 ft) Rotary opening : 698.5 mm (27 ½ in) Drill floor dimensions : 10 x 4 m (33 x 13 ft) Hoisting System (Cylinder System) Pulling capacity : 100 tn (200,000 lbs) Pull down capacity : 22 tn (44,000 lbs) Working clearance to table (under safer sub) : 16.4 m (53.8 ft) Top Drive - TDK-32-150-H - hydraulically driven Load capacity : 150 tn (300,000 lbs) Max. drilling torque * : 32.000 Nm (23.600 ft-lbs) Max. breaking torque * : 38.000 Nm (28,000 ft-lbs) Drilling speed : 0 – 177 rpm Clamping & breaking device* : 100.000 Nm (73.760 ft-lbs) Rated power * : 280 kW (375 HP) Pressure stage * nominal value : 350 bar (5,000 psi) Engine (Caterpillar C 27 ACERT) Rated power : 708 kW (950 HP) Diesel tank capacity : 1.700 l (448 gal) Pipe handling system - V-door type (trailer-based) Max. drill pipe length : Range III Max. casing length : Range III Transport dimensions rig module Total weight (excl. truck) : app. 59 t (130,000 lbs) Length (king pin to rear) : 12.6 m (41.3 ft) Height (incl. top drive) : 4.2 m (13.7 ft) Width : 2.5 m (8.2 ft) Mast The self-standing, telescopic mast consists of two independent sections with box-type profiles. The outer mast section is connected to the trailer frame and is equipped with guides for the inner mast section. This sliding inner mast section is lifted by a central feed cylinder system and allows lifting and pull-down operations. Two integrated backstay cylinders raise the mast system into the working position including crown block and top drive. The telescopic mast system is designed to handle drill pipes and casings up to Range III. No external guy lines are necessary. Hoisting system The hoisting system consists of a central, single cylinder with enhanced buckling resistance. The central cylinder is integrated inside the inner moving mast section directly below the main rope top sheaves. The double reeved, twin-wire rope system allows the top drive twice the lifting stroke and speed of the cylinder. The hoisting system enables lifting and pull down operations. Semi-trailer and substructure The rig frame is directly connected to the five (5) axles semi-trailer. The semi-trailer is in accordance with standard road regulations and equipped with a coupling pin according to client’s requirements. Driller’s cabin The driller’s cabin is located on the drill floor and offers a high quality workplace with joystick control. The driller controls all drilling functions centrally from the ergonomic and air-conditioned cabin. The built-in instrumentation system provides clear information to the driller at any time. The system is optionally equipped with a digital data visualization and data acquisition system. Transport and set-up The compact and trailer-based transport units allow a fast and safe moving and rig-up/down operation and a reduction of transport costs. The compact footprint of the drilling unit, reduces the costs for wellsite preparation and the environmental impact. Substructure and drill floor The trailer-based substructure is equipped with a selferecting system to lift the drill floor including driller’s cabin and power tong to the final working position. The clear height of 4,1m below the drill floor allows sufficient space for BOP installations. The compact transport unit including driller’s cabin, power tong, walkways and handrails allows fast moving operations with high HSE standards. Pipe handling system The automated pipe handling system with hands-off technology allows drill pipe and casing operation without the necessity of a finger board and increases the personal safety. For redundancy reasons the pipes can also be handled by using the utility winch and the V-door ramp. Top drive The hydraulically operated top drive TDK 150 H is based on 40 years of experience in manufacturing rotary heads for drilling rigs. It is designed to meet advanced performance standards in terms of high drilling torque, high make up and break out torque, rotation speed, reliability and serviceability. Additional main components Power tong with spinning function 2-7/8” – 8-1/2” 2 catheads with 140 kN pulling capacity Hydraulic slip lifting device Utility winch with 4 tn lifting capacity Optional equipment and services Customized mud handling systems Triplex mud pumps 24/7 after sales service with worldwide spare and wear part availability Remote access and troubleshooting via WAN Training Center for customer’s personnel
Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. ------------------------------------------------------------------------------------------------------------------- Search words(for official use only) - Hydraulic Land Drilling Rig for Sale in Europe Hydraulic Land Drilling Rig - 750hp For Sale Hydraulic Land Drilling Rig - 1000hp - For Sale New 1000hp Hydraulic Land Drilling Rig 750hp Hydraulic Land Drilling Rig for sale 1000hp Hydraulic Land Drilling Rig for Sale in Europe Land Drilling Rigs for Sale in Europe New 750HP Hydraulic Land Drilling Rig for sale in Europe ---------------------------------------------------------------------------------------------------------------------
Simco 2800 Drilling Rig for Sale Simco 2800 Drilling Rig - 2009 Built - For Sale Model : 2800 Manufacturer : Simco Year : 2009 Condition : Used Description : 2009 Simco 2800 Drill Rig Note: This is set up as a water well / geothermal drill & If you prefer a 2800 HSHT set up for geotechnical drilling with auto hammer that is possible, Rod 3" PDQ style 10 foot length Ingersoll-Rand 375 CFM / 170 PSI Air Compressor Centerline Monoplex Mud Pump Rod box FMC I0413C Water injection pump Deutz Diesel Deck Engine (rated 70 HP) 2 Winches Mounted on a 1994 Chevrolet Kodiak 4x4 truck Caterpillar 3116 Diesel Engine Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. ---------------------------------------------------------------------------------------------------------------- Search words (for official use only) : 2009 Built Simco 2800 Drilling Rig for Sale Used Simco 2800 Drilling Rig for Sale Simco Drilling Rig for Sale in USA Drilling Rig - Simco 2800 - For Sale Simco 2800 Used Drilling Rig for Sale in USA ----------------------------------------------------------------------------------------------------------------
Speedstar 70K Drilling Rig for Sale Drilling Rig - Speedstar 70K - For Sale Model : 70K Drill Rig Manufacturer : Speedstar Year : 1982 Condition : Used Description : 1982 Speedstar 70K Drill Rig 740 ft of 5" Drill Pipe 2 Drill collars Mounted on a CCC (Crane Carrier Company) Truck Diesel Engine Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. --------------------------------------------------------------------------------------------------------- Search words (for official use only) : 1982 Built Speedstar 70K Drilling Rig for Sale Used Speedstar 70K Drilling Rig for Sale Speedstar 70K Used Drilling Rig for Sale Speedstar 70K Drilling Rig - 1982 Built - For Sale Speedstar 70K Drilling Rig for Sale in USA -------------------------------------------------------------------------------------------------------
Workover Rigs For Sale SRE 600 Double - 4200m - Used Workover Rig - For Sale 4200m Used Workover Rigs For Sale
SRE-600 Model 4210 3808 drum size Self propelled, double drum, back in & 5 axel carrier Rated capacity of 4200m – 73mm tubing DDEC series 60 12.5 L 450 hp engine Allison CLT5860 6 speed transmission 25.4 X 101.6 c/w double 24” eaton main drum brake assist 101” cobalt air actuated sand line brakes SRE 107-210 - 32.6m rated 95dNa stung 6 lines mast 4200m of 73mm tubing racking capacity Ideco shorty 110 ton block hook 3 X 61cm sheaves & 25.4mm drill line Vapor proof florescent & sodium lights 25.4 mm X 300m drilling line 14mm X 3400 m sand line Hydraulic martin decker clipper weight indicator Dual winches Combination 3 compartment steel skidded building 3.5m w X 11.6M l John deer 75 kW generator Handling equipment Foster model 58-93R tubing tongs Cavins advance model C air slips BJ-90-TA-100 ton X 73mm & BJ-90-TA-65 ton X 60.3mm elevator 73mm & 60.3mm standard tubing sizes 19mm – 25mm rod sizes 2 - 2.4m w X 13.7m l & 1 – 2.4m w X 13.7m l rig mats 2.4m w X 12.5m l c/w 2 sets tumble catwalk racks Safety equipment 4 – 14kg dry chemical fire extinguishers 4 self-contained scott air pack breathing apparatuses c/w 2 spare bottles LEL monitor & 6 personal monitors gas detector Safety and directional signs Electrical ground bonding equipment Basket stretcher c/w spine board, rescue slings and blankets Crown saver 2 self-retracting life lines BOP equipment Class III Shaffer 152mm X 35mpa LWS double gate & shaffer spherical Oilco 4 accumulator station 250 L 21mpa c/w operators controls and N2 backup mounted in skidded combination building 2 -73mm X 35mpa safety valves 89mm rod BOP Kill spool 152mm X 21mpa c/w 50mm X 35mpa wing valve 76mm X 9m swab lubricator c/w sinker bars & tool trap 76mm X 21mpa swabbing valve Pump Skidded heated steel building National JWS340 tripleX 102mm plungers X 127mm stroke John deer 6125H 12.5 L 350 hp engine Eaton 10 speed transmission Mission magnum 127mm X 152mm charge pump 6 – 50mm X 35mpa manifold Mud tank 38m3 two compartment mud tanks c/w stairs railings, mix hopper, mud guns, settling trough, steam coil, lighting & wind flag 120m X 50mm X 35mpa line pipe and suction hose Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. --------------------------------------------------------------------------------------------------------------------------------- Search words (for official use only) - Workover Rigs For Sale Used 4200m SRE 600 Double Workover Rig for Sale SRE 600 Double - 4200m Used Workover Rig for sale Used American Workover Rigs Workover Land Rigs in USA Workover Rig for sale RE 600 Double (4200m) for sale -------------------------------------------------------------------------------------------------------------------------------------
Generic Bucket Style Drilling Rig for Sale Drilling Rig - Generic Bucket Style - For Sale Model : Bucket Style Drill Rig Manufacturer : Generic Condition : Used Description : Bucket Style Drill Rig Detroit Diesel Deck Engine Mounted in a 1984 International 4370 Series truck Tandem Axle Cummins Diesel Truck Engine Note: Bill of sale only (no-title) & Selling "as is, where-is". Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. --------------------------------------------------------------------------------------------------------------------- Search words (for official use only) : Used Generic Bucket Style Drilling Rig for Sale Used Generic Drilling Rig for Sale Generic Land Drilling Rig for Sale Generic Bucket Style Used Drilling Rig for Sale Generic Bucket Style Drilling Rig for Sale in USA -----------------------------------------------------------------------------------------------------------------------
Watson 3000 Caisson / Foundation Drilling Rig for Sale Drilling Rig - Watson 3000 Caisson - For Sale Model : 3000 Caisson / Foundation Drill Rig Manufacturer : Watson Year : 1987 Condition : Used Description : Watson 3000 Caisson / Foundation Drill Rig Model : 3110CM S/N : 15191 325bl side frame 2138653 L5n06627 frame 215-6451 PE6068r027268 Diesel Engine - 6575 Hours Track Mounted Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. --------------------------------------------------------------------------------------------------------------------------- Search words (for official use only) : 1987 Built Watson 3000 Caisson / Foundation Drilling Rig for Sale Used Watson 3000 Caisson / Foundation Drilling Rig for Sale Watson 3000 Caisson Drilling Rig - 1987 Built for Sale Watson 3000 Foundation Drilling Rig for Sale Watson 3000 Caisson / Foundation Drilling Rig for Sale in USA -------------------------------------------------------------------------------------------------------------------------------
UMD 135 Land Drilling Rig - For Sale in Europe New Semi Mobile Drilling Rig For Sale - UMD 135 Main Technical Specifications Engine type : C 15 ACERT Nominal engine power hp (kW) : 475 (354) Transmission : Allison 4700 OFS Nominal hoisting capacity metric ton (lbs) : 135 (297000) Workover depht (m) drill pipe (2 7/8”) : 5800 Drilling depht (m) (4 1/2“) : 2500 Rope diameter (mm) : 26 Mast height (m) : 32 Drilling floor height (m) : 5 Travelling system : 5x4 Working pressure (mpa) : 0, 65-0, 8 Technical Specifications Engine type : C 15 ACERT Nominal engine power hp (kW) : 475 (354) Transmission : Allison 4700 OFS Nominal hoisting capacity metric ton (lbs) : 135 (297000) Workover depht (m) drill pipe (2 7/8”) : 5800 Drilling depht (m) (4 1/2“) : 2500 Rope diameter (mm) : 26 Mast height (m) : 32 Drilling floor height (m) : 5 Travelling system : 5x4 Working pressure (mpa) : 0, 65-0, 8 Drawworks Main Drum - Input power (hp) : 500 Barrel size : D18” W38” Brake rim size : D44” W12” Wire line size : 1 ” (26 mm) Drum speed : 7F/1R Brake cooling : Water circulation Brake system : Band / disc / auxiliary (Parmac SSR-28 hydro-brake) Lubrication : Automatic or manual Drum clutch : Air flex type Chain drives : All chains are fully encloded for oil bath lubrication ensuring longer life and cleaner operation Sand Line Drum - Barrel size : D13” W37“ Brake rim size : D44” W9½” Spooling capacity : 16114’ Sand line wire size : 9/16” (14 mm) - 5/8” (16 mm) Rig Power & Transmission Diesel engine(s) : Caterpillar C-15 ACERT, 540Hp, 2.100rpm Transmission(s) : ALLISON OFS 4700 series with torque converter Right angle gear box : Min 500 hp gear box in oil bath gear case Compound box : Twin engine drive through transmission includes disconnect clutches at compound shaft for engines Mast & Crown Block Mast - Mast complete set : Design and conform to API 4F specification Mast height : 32m ( 105ft ) Max. static hook load capacity : 1.323kN ( 300.000lbs ) Racking capacity : 2.500m ( 4 ½’’ DP 19.2m double ) Height of the monkey board : 17.2m ( from floor ) Mast type : Hydraulic telescopic Accessories : Two (2) X hydraulic catheads, Two (2) X tong weight boxes, standpipe, exproof lightning....etc Crown Block - Crown block complete set : Design and conform to API 4F specification Max. hook load : 1.323kN (300.000lbs) Number of sheaves : (3) Main + (1) fast line + (1) deadline + (1) sandline + (2) sheaves for service winch Sheaves OD : Fast Lines Ø32" ( Ø813mm ) Dead Line Ø28" ( Ø711mm ) Sand Line Ø28" ( Ø711mm ) Dia. of sheave’s grove : Fast & Dead Lines Ø1" ( Ø26mm ) Sand & Winch Lines Ø 5/8" ( Ø16mm ) Substructure Substructure complete set : Design and conform to API 4F specification Height of substructure substructure : 5m Area of substructure : 40m2 Max. static rotary load : 1.400kN Set back capacity : 700kN BOP lifting tools : 3tons capacity electric or mechanic winches Accessories : Mouse, rat hole, dog house Rotary Table Diameter of opening : 20½" Center of table to centerline of sprocket teeth : 44" Maximum static load, ton : 350 Max speed, rpm : 300 Gear ratio : 3.79 Dimensions (LxWxH), in : 78×56×24 Approximate Weight, lbs : 12,020 Traveling Block & Hook Traveling block : 1.400kN max. statik load, 4 sheaves, Ø32’’ sheaves dia. Ø1’’ (Ø26mm ) groove dia. Hook : 1.400kN max. statik load, 5tons spring stroke. Elevator link(s) : 1.400kN rated load capacity. Swivel Static hook load, ton : 135 Working pressure, psi : 5,000 Maximum speed, rpm : 300 Coupling thread to stem : 4-1/2" Reg LH Coupling thread to kelly : 6-5/8" Reg LH Stem I.D. : 2- 1/2" Trailer & Other Systems Trailer : Three axles semi mobile trailer, 16 wheels, fabricated high tensile steel vehicle frame reinforced at points of greatest stress. Highway equipment and cab included. Installed fuel tank. Tool box. Auxilary drill line drum, all axles dressed brake, folding walkwayss on both sides of trailer. Hydraulic jacks : Four hydraulic operated leveling jacks Hydraulic service winch : 5 metric tons drum pull capacity Deadline anchor : Deadline anchor attached directly to trailer frame Air system : Compressor (engine drive), air tank, relief valves, air dryer, gauges, all clutches Hydraulic system : Hydraulic pump, system operate hydraulic cylinders on mast, hydraulic jacks, hydraulic pipe tong, and hyraulic winch. Control valves, hydraulic oil tank, filters, pipes, hydraulic and air valve connections, fittings. Electrical lighting system : All the electrical equipments on the mast, and substructure are ex-proof type Instrumentation : Driller control panel, weight indicator, gauges, air valves, cables, hoses, fittings, transducers, paint Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. --------------------------------------------------------------------------------------------------------------------------------- Search words(for official use only) : UMD 135 Land Drilling Rig for Sale UMD 135 Semi Mobile Drilling Rig For Sale New Semi Mobile Drilling Rigs New UMD 135 Drilling Rig For Sale in Europe Land Drilling Rigs For Sale -------------------------------------------------------------------------------------------------------------------------------------
Schramm T64HB Drilling Rig for Sale Drilling Rig - Schramm T64HB - For Sale Model : T64HB Drill Rig Manufacturer : Schramm Condition : Used Description : Schramm T64HB Drill Rig – S/N: 936 & BM#: T64HB-3380 Note: GHH 750 cfm / 300 or 850 cfm / 200 psi Air Compressor & Detroit 8V92 Diesel Deck Engine are removed and will be installed at EWD or you can buy "as is" and install on your own. Runs Drill Pipe (20ft x 4-1/2” x 2-7/8” IF) Basic Tooling included Hydraulic Leveling Jacks Mounted on a GMC 7500 Truck Detroit 6V53 Diesel Engine Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. ---------------------------------------------------------------------------------------------------------------------------- Search words (for official use only) : Used Schramm T64HB Drilling Rig for Sale Schramm T64HB Used Drilling Rig for Sale Schramm Drilling Rig for Sale Schramm T64HB Land Drilling Rig for Sale Schramm T64HB Drilling Rig for Sale in USA ------------------------------------------------------------------------------------------------------------------------------
Atlas Copco RD20 III Drilling Rig for Sale Drilling Rig - Atlas Copco RD20 III - For Sale Model : RD20 III Drill Rig Manufacturer : Atlas Copco Year : 2008 Condition : Used Description : 2008 Atlas Copco RD20 III Drill Rig - S/N: 21162 Caterpillar C27 Diesel Deck Engine Hour meter shows 33,009 Hours Mounted on CCC (Crane Carrier Company) Truck Caterpillar C13 Diesel Engine Note : More details and pictures are available upon request Note : Ingersoll-Rand / Epiroc brand Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. ------------------------------------------------------------------------------------------------------------------------------ Search words (for official use only) : 2008 Built Atlas Copco RD20 III Drilling Rig for Sale Atlas Copco RD20 III Drilling Rig - 2008 Built for Sale Used Atlas Copco RD20 III Drilling Rig for Sale Atlas Copco RD20 III Used Land Drilling Rig for Sale Atlas Copco RD20 III Drilling Rig for Sale in USA --------------------------------------------------------------------------------------------------------------------------
UMD 110 Land Drilling Rig - For Sale in Europe New Semi Mobile Drilling Rig For Sale - UMD 110 Main Technical Specifications Engine type : C 13 ACERT Nominal engine power hp (kW) : 415 (309) Transmission : Allison 4500 OFS Nominal hoisting capacity metric ton (lbs) : 110 (242000) Workover depht (m) drill pipe (2 7/8”) : 4500 Drilling depht (m) (4 1/2“) : 1500 Rope diameter (mm) : 26 Mast height (m) : 32 Drilling floor height (m) : 5 Travelling system : 4x3 Working pressure (mpa) : 0, 65-0, 8 Technical Specifications Drawworks Main Drum - Input power (hp) : 450 Barrel size : D18” W38” Brake rim size : D44” W12” Wire line size : 1 ” (26 mm) Drum speed : 6F/1R Brake cooling : Water circulation Brake system : Band / disc / auxiliary (Parmac SSR-28 hydro-brake) Lubrication : Automatic or manual Drum clutch : Air flex type Chain drives : All chains are fully encloded for oil bath lubrication ensuring longer life and cleaner operation Sand Line Drum - Barrel size : D13” W37“ Brake rim size : D44” W9½” Spooling capacity : 16114’ Sand line wire size : 9/16” (14 mm) - 5/8” (16 mm) Rig Power & Transmission Diesel engine(s) : Caterpillar C-13 ACERT, 415Hp, 2.100rpm Transmission(s) : Allison OFS 4500 series with torque converter Right angle gear box : Min 500 HP gear box in oil bath gear case Compound box : Twin engine drive through transmission includes disconnect clutches at compound shaft for engines Mast & Crown Block Mast - Mast complete set : Design and conform to API 4F specification Mast height : 32m ( 118ft ) Max. static hook load capacity : 1.100kN ( 250.000lbs ) Racking capacity : 1.500m ( 4 ½’’ DP, 19.2m double ) Height of the monkey board : 17.2m ( from floor ) Accessories : Standpipe , exproof lightning....etc Mast type : Hydraulic telescopic Crown Block - Crown block complete set : Design and conform to API 4F specification Max. hook load : 1.100kN (250.000lbs ) Number of sheaves : (2) Main + (1) fast line + (1) deadline + (1) sandline + (2) sheaves for service winch Sheaves OD : Fast Lines Ø32" ( Ø813mm ) Dead Line Ø28" ( Ø711mm ) Sand Line Ø28" ( Ø711mm ) Dia. of sheave’s grove : Fast & Dead Lines Ø1" ( Ø26mm ) Sand & Winch Lines Ø 5/8" ( Ø16mm ) Traveling Block & Hook Traveling block : 1.100kN Max. statik load, 3 sheaves, Ø32’’ sheaves dia. Ø1’’ (Ø26mm ) groove dia. Hook : 1.100kN Max. statik load, 3tons spring stroke. Elevator link(s) : 1.100kN rated load capacity. Swivel Static hook load, ton : 110 Working pressure, psi : 5,000 Maximum speed, rpm : 300 Coupling thread to stem : 4-1/2" Reg LH Coupling thread to kelly : 6-5/8" Reg LH Stem I.D. : 2-1/2" Trailer & Other Systems Trailer : Three axles semi mobile trailer, 12 wheels, fabricated high tensile steel vehicle frame reinforced at points of greatest stress. Highway equipment and cab included. Installed fuel tank. Tool box. Auxilary drill line drum, all axles dressed brake, folding walkwayss on both sides of trailer. Hydraulic jacks : Four hydraulic operated leveling jacks Hydraulic service winch : 5 metric tons drum pull capacity Deadline anchor : Deadline anchor attached directly to trailer frame Air system : Compressor (engine drive), air tank, relief valves, air dryer, gauges, all clutches Hydraulic system : Hydraulic pump, system operate hydraulic cylinders on mast, hydraulic jacks, hydraulic pipe tong, and hyraulic winch. Control valves, hydraulic oil tank, filters, pipes, hydraulic and air valve connections, fittings. Electrical lighting system : All the electrical equipments on the mast, and substructure are ex-proof type Instrumentation : Driller control panel, weight indicator, gauges, air valves, cables , hoses, fittings, transducers, paint Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. -------------------------------------------------------------------------------------------------------------------------------------- Search words(for official use only) : UMD 110 Drilling Rig For Sale in Europe New UMD 110 Semi Mobile Drilling Rig For Sale New Semi Mobile Drilling Rigs Land Drilling Rigs For Sale New Land Drilling Rig --------------------------------------------------------------------------------------------------------------------------------
Driltech D40K Drilling Rig for Sale Drilling Rig - Driltech D40K - For Sale Model : D40K Drill Rig Manufacturer : Driltech Year : 1993 Condition : Used Description : 1993 Driltech D40K Drill Rig Caterpillar 3408 diesel deck engine Sullair 1000 cfm / 350 psi Air Compressor (valve issues) 50,000 lbs of pullback Water Injection Pump 4 cylinder Hammer Lubricator 1000 ft of 4-1/2" x 25 ft of used drill pipe included 8" hammer, petol wrench, control cover, & sling for rods included Mounted on Mack Truck Rated 300 HP with Jake Brakes All new tires installed late 2023 Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. -------------------------------------------------------------------------------------------------------------------------- Search words (for official use only) : 1993 Built Driltech D40K Drilling Rig for Sale Driltech D40K Drilling Rig - 1993 Built for Sale Used Driltech D40K Drilling Rig for Sale Driltech D40K Used Land Drilling Rig for Sale Driltech D40K Drilling Rig for Sale in USA -------------------------------------------------------------------------------------------------------------------------------
Driltech D35K Drilling Rig for Sale Drilling Rig - Driltech D35K - For Sale
Model : D35K Drill Rig Manufacturer : Driltech Year : 1991 Condition : Used Description : 1991 Driltech D35K Drill Rig 850 CFM / 350 PSI Air Compressor Caterpillar 3406 diesel deck engine (has issues as machine has been parked for 5 years) 35,000 lbs of pullback 22" table opening Included 23 pieces of 20ft x 4-1/2" OD drill pipe. Mounted on a Ford L8000 truck diesel engine Location : Western Europe Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. ----------------------------------------------------------------------------------------------------------------------------- Search words (for official use only) : Driltech D35K Drilling Rig - 1991 Built for Sale 1991 Built Driltech D35K Drilling Rig for Sale Used Driltech D35K Drilling Rig for Sale Driltech Used Drilling Rig for Sale Driltech D35K Drilling Rig for Sale in Western Europe -----------------------------------------------------------------------------------------------------------------------------------
Ingersoll-Rand A300 Drilling Rig for Sale Ingersoll-Rand A300 Drilling Rig - 1994 Built - For Sale Model : A300 Drill Rig Manufacturer : Ingersoll-Rand Year : 1994 Condition : Used Description : 1994 Ingersoll-Rand A300 Drill Rig Mounted on 2006 International 4300 Truck with 89,137miles Drill Rig Has 8873 Hrs 8000 Lbs Torque Top Head Drive 6000 Psi Hydraulic Pump 300-Gal Water Tank 2 Winches 3l6 Moyno Pump Slide Base with Cross Slide Head Probe Hammer and Cathead 10-Foot Drill Stroke and Fixed Monopole Tower 10 Ft Rod Rack on Truck Deck 2 Underdeck Auger Racks 22ft 6” Working Height Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. ------------------------------------------------------------------------------------------------------------------------- Search words (for official use only) : 1994 Built Ingersoll-Rand A300 Drilling Rig for Sale Drilling Rig - Ingersoll-Rand A300 - For Sale Used Ingersoll-Rand A300 Drilling Rig for Sale Ingersoll-Rand A300 Used Land Drilling Rig for Sale Ingersoll-Rand A300 Drilling Rig for Sale in USA ------------------------------------------------------------------------------------------------------------------------
Ingersoll Rand A300 Drilling Rig for Sale Drilling Rig - Ingersoll Rand A300 - For Sale Model : A300 Drill Rig Manufacturer : Ingersoll-Rand Year : 1994 Condition : Used Description : 1994 Ingersoll Rand A300 Drill Rig Mounted On A 2007 International 4300 Truck With 98,331 Miles Drill Rig Has 8948 Hours Top Head Drive With 800 Ft Lbs. Torque 6000 Psi Hydraulic Pump 300-Gal Water Tank 2 Winches 3l6 Moyno Pump Slide Bas With Cross Slide Head Rig Has Probe Hammer And Cathead Deck Mounted Toolboxes Under Deck Auger Racks Telescoping Tower 16 Ft Working Height A-300 Monitoring Drill Specifications : Power System : Power transfer : Transfer case and pump drive Hydraulic pumps : Variable displacement : 30gpm Fixed displacement : 40gpm Reservoir : 100 gallons Filtration : 10 micron element Dimensions : Length : 25ft. 0 in. Width :8ft. 0 in. Height (derrick down) : 10ft. 9 in. Height (derrick vertical) : 14ft. 10 in. Weight (less truck) : 8,000lb. Weight (Including truck) : 16,000lb. Leveling System : Hydraulic jacks : 3(1 front; 2 rear) Diameter/stroke : 5"x30" Pad diameter : 10 in. diameter Derrick : Tubing section : (2)5"x10"x0.25" wall Length : 12.0 ft. Rotary head travel : 8ft. Feed System : Pulldown/Pullback : 18,000 lb. Head travel speed : 50ft/min. Feed motor : Hydraulic; variable speed Feed chain : Roller Rotation System : Motor type : Hydraulic planetary gear torque : 8,000ft-lb. (96,000 in-lb.) Speed range (standard) : 0-75 rpm Side slide (hydraulic) : 12" overall Spindle adapter : 8 bolt flange Hoist : Capacity : 8,000 lb. Speed : 85ft/min. Cable : 1/2"x 60ft. Options : Cat head : 8"x8-3/4" drum Pump : Moyno 3L6 "A" rod rack capacity : Capacity of 20 pcs.(5ft) Twin auger racks capacity : 90ft. of 6¼ x5ft.augers Three speed rotary head : 0-215 rpm; shift-on-the-fly Derrick extension : 6ft hydraulic telescoping Tool boxes : 24"x18"x18"(each) Auger centering guide : For 4â…œ" to 8¼" hollow stem augers Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. ----------------------------------------------------------------------------------------------------------------------------------- Search words (for official use only) : Ingersoll Rand A300 Drilling Rig - 1994 Built for Sale 1994 Built Ingersoll Rand A300 Drilling Rig for Sale Used Ingersoll Rand A300 Drilling Rig for Sale Ingersoll Rand A300 Used Land Drilling Rig for Sale Ingersoll Rand A300 Drilling Rig for Sale in USA ----------------------------------------------------------------------------------------------------------------------------------
Ingersoll-Rand A300 Drilling Rig for Sale Drilling Rig - Ingersoll-Rand A300 - For Sale
Model : A300 Drill Rig Manufacturer : Ingersoll-Rand Year : 1993 Condition : Used Description : 1993 Ingersoll-Rand A300 Drill Rig Mounted on 2006 Ford F650 Truck Truck has 233,472 Miles and Rig has 8855 Hrs Deck Tool Storage Underdeck Auger Racks 10 ft Rod Storage On Deck 200 Gallon Water Tank 3l6 Moyno Pump Telescoping Tower 1 Winch A-300 Monitoring Drill Specifications : Power System : Power Transfer : Transfer case and pump drive Hydraulic pumps : Variable displacement : 30 gpm Fixed displacement : 40 gpm Reservoir : 100 gallons Filtration : 10 micron element Dimensions : Length : 25ft.0 in Width : 8ft. 0 in Height (derrick down) : 10ft. 9 in. Height (derrick vertical) : 14ft. 10 in. Weight (less truck) : 8,000 lb. Weight (Including truck) : 16,000 lb. Leveling System : Hydraulic jacks : 3(1front;2 rear) Diameter/stroke : 5ft x 30ft Pad diameter : 10 in. diameter Derrick : tubing section : (2)5ft x 10ft x 0.25ft wall Length : 12.0ft. Rotary head travel : 8ft Feed System : Pulldown/Pullback : 18,000lb. Head travel speed : 50ft/min. Feed motor : Hydraulic;variable speed Feed chain : Roller Rotation System : Motor type : Hydraulic planetary gear Torque : 8,000ft-lb.(96,000 in-lb.) Speed range (standard) : 0 - 75 rpm Side slide(hydraulic) : 12ft overall Spindle adapter : 8 bolt flange Hoist : Capacity : 8,000lb. Speed : 85ft/min. Cable : 1/2ft x 60ft. Options : Cat head : 8ft x 8-3/4ft drum Pump : Moyno 3L6 "A" rod rack capacity : Capacity of 20 pcs.(5ft) Twin auger racks capacity : 90ft. of 6¼ x 5ft. augers Three speed rotary head : 0-215 rpm; shift-on-the-fly Derrick extension : 6ft hydraulic telescoping Tool boxes : 24ft x 18ft x 18ft (each) Auger centering guide : For 4â…œ" to 8¼" hollow stem augers Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. ------------------------------------------------------------------------------------------------------------------------ Search words (for official use only) : 1993 Built Ingersoll-Rand A300 Drilling Rig for Sale Ingersoll-Rand A300 Drilling Rig - 1993 Built for Sale Used Ingersoll-Rand A300 Drilling Rig for Sale Ingersoll-Rand A300 Used Land Drilling Rig for Sale Ingersoll-Rand A300 Drilling Rig for Sale in USA -------------------------------------------------------------------------------------------------------------------------
Ingersoll-Rand T3W Drilling Rig for Sale Drilling Rig - Ingersoll-Rand T3W - For Sale Model : T3W Drill Rig Manufacturer : Ingersoll-Rand Year : 1999 Condition : Used Description : 1999 Ingersoll-Rand T3W Drill Rig Doosan 900 Cfm / 350 Psi Air Compressor (New unit Installed May of 2022) CAT 3406 Diesel Deck Engine (Was Rebuilt May of 2022) Note: Both Have About 950 Hours As of July 2024 With A 5 Year Factory Warranty The Rotation Head Was Completely Rebuilt In April 2024 As Well As Most of The Hydraulic Pumps 9 Rod Carousel set up for (3-1/2" OD) Mounted on a newer 2005 Kenworth T-800 Truck With 212,000 Miles Newer rated 565 Hp Cummins ISX Diesel Engine (Installed With About 18,500 Miles Ago) 18 Speed Transmission Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. ------------------------------------------------------------------------------------------------------------------------- Search words (for official use only) : 1999 Built Ingersoll-Rand T3W Drilling Rig for Sale Ingersoll-Rand T3W Drilling Rig - 1999 Built for Sale Used Ingersoll-Rand T3W Drilling Rig for Sale Ingersoll-Rand T3W Used Land Drilling Rig for Sale Ingersoll-Rand T3W Drilling Rig for Sale in USA -----------------------------------------------------------------------------------------------------------------------
Speedstar 1500 Drilling Rig for Sale Drilling Rig - Speedstar 1500 - For Sale Model : 1500 Drill Rig Manufacturer : Speedstar Year : 1976 Condition : Used Description : 1976 Speedstar 1500 Drill Rig with 22 Draw works Combo Air/Mud Top Head Drive Drilling Rig Mounted on a 1976 Ford 9000 (5 Ton) Truck - (Serial # U91VVC16817) Cummins Diesel Engine & 5" X 6° Gardner Denver Mud Pump 500 CFM X 250# Air Compressor Truck Mounted - (J. L. Beeman) With the following Auxiliary Equipment: 100 Ft. 3-1/2" Air Drill Collars -- (Rex McFadden Ltd./Atlas machine) Shop Made Subs & Collars - (Owens Machine) 10 Stabilizer - (Rex McFadden/ Atlas Machine) 900 FL 3" (Range 1) Air Drill Pipe - (J. L. Beeman) 5-1/2" Rock Hound Air Hammer with High Pressure & Low Pressure Piston/ 6-1/2" Bit - (Rock Hound) Lil Darlin Blow Out Preventer - (Mauldin Sales) Single Axle Shop Made 10° Trailer with Dog House with Junk Basket - (Mauldin Sales) Single Axle Shop Made 12° Trailer Mud House - (Mauldin Sales) 1965 Model Shop Made 3 X 7,000# Axles X 20ft Drill Pipe Trailer VIN # TRI48964 - (Sojourher Drilling) Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. ----------------------------------------------------------------------------------------------------------------------------- Search words (for official use only) : 1976 Built Speedstar 1500 Drilling Rig for Sale Speedstar 1500 Drilling Rig - 1976 Built for Sale Used Speedstar 1500 Drilling Rig for Sale 1976 Built Speedstar Land Drilling Rig for Sale Speedstar 1500 Drilling Rig for Sale in USA ---------------------------------------------------------------------------------------------------------------------------------
Schramm T64HB Drilling Rig for Sale Drilling Rig - Schramm T64HB - For Sale Model : T64HB Drill Rig Manufacturer : Schramm Condition : Used
Schramm T64HB Drill Rig GHH 750 cfm / 300 psi Air Compressor (recently overhauled) Detroit 8V92 Diesel Deck Engine Mounted on a Ford Truck Diesel Engine Notes : Top head is good hydraulic motors overhauled in 2022 Overall fair working condition
Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. ------------------------------------------------------------------------------------------------------------------------------ Search words (for official use only) : Used Schramm T64HB Drilling Rig for Sale Schramm Used Drilling Rig for Sale Schramm T64HB Used Drilling Rig for Sale Schramm T64HB Land Drilling Rig for Sale Schramm T64HB Drilling Rig for Sale in USA ---------------------------------------------------------------------------------------------------------------------------------
VFD Land Drilling Rig for Sale Chinese 2000HP Land Rig Land Rig Builders (China) - 2000hp
General description : Rig type : ZJ70 rig Rig rated dept : 6000m (127mm DP) ~7000 (114mm DP) Traveling system : 6 x 7 (sheaves), parallel Available height of derrick : 150 ft Rig floor dimension / height of drilling floor : 42ft x 40ft / 30ft Opening diameter of rotary table : 952.5mm (37 1/2 inch) Rated input power of drawworks : 2680 hp or 2000kW Capacity of mud pump : 3 x 1600 hp Power transfer type : AC-VFD-AC
Drilling equipment : Mast : Model : JJ450/45-K11 : Type II consist of five sections, 150 ft clear height Top span (front x side) 2.2 m x 2.2 m Bottom span (front x side) 9 m x 2.7 m Max hook load 450t or 1,210,000 lbs
Drawworks : 2680 hp or 2000 kW Driven by two AC VF motor Max pull fast line : 485 kn (110,000 lbs) Wire rope : F38mm Air cool hydraulic disc brake : PS80
Crown block : Model : TC450-7 Max hook load : 4500 kn (450t) OD of sheave : 1524 mm Diameter of drilling line : F38mm No of sheaves : 7 No of sand line sheave : 1 Diameter of sand line : F14.5mm
Traveling block : Model : YC450 Max static load : 4500 kn (450t) OD of sheave : 1524mm No of sheave : 6
Rotary table : Model : ZP375 Table opening diameter : 37 1/2" Max static load : 5850 kn Max speed : 300 rpm Rate power : 600 volt Gear ratio : 3.56
Top drive : Model : NOV/TDS-11SA/Electrical/800 hp Hoisting capacity : 500 t Output torque continuous : 37,500 ft-lbs (800hp) Tool torque (intermittent @ stall) : 55,000 ft-lbs Max speed : 228 rpm Drilling motor : AC 575 VAC (2 x 400 hp) Make up torque : 47,000 ft-lbs Break out torque : 55,000 ft-lbs
Mud pumps : Model : HHF-1600 Input power : 1600 hp (1176 kW) Max cylinder diameter : 7" or F180mm Length of stroke : 12" or 305mm Rate no. of stroke : 120 spm Three triplex single acting piston, HHF-1600
Solid control : Shale shaker : Derrick FLC-503/rated 60L/s Desander : DSV-10-3/rated 1280 gpm Desilter : S-416-S/rated 1280 gpm Mud cleaner : Derrick FLC-503-3P
Mud tank : 2,500 bbls
Generator : Type : SR4B No. of gen. : 04 set (01 back up) Capacity : 1750 kva Rate voltage : 600 vac
AC distribution / transformer : ABB/AC S800 Transformer SUNTEN/ SC B9-1600, 600 vac/380 vac
Emergency generator : 1 set CAT C15 Diesel : 4 set CAT3512B
BOP stack : 21 1/4" BOP 2,000 wp including : 01 annular 5,000 wp 01 double ram 2,000 wp 13 5/8" BOP 10,000 wp including : 01 annular 5,000 wp 01 double ram 10,000 wp 01 single ram 10,000 wp Comply with lifting BOP swl : 2 x 25 ton
Warranty : Guarantee period shall last for 18 months counting from the delivery date or 12 months from the commencement of operation at the well site, which expiration date comes earlier/
Price & terms : Please enquire using the email form below.
The details mentioned above are believed to be accurate but are not guaranteed.
------------------------------------------------------------------------------------------------------------------------------- Search words(for official use only) - VFD Land Drilling Rig for Sale 2000hp Land Drilling Rig From China Chinese Rig Builders Chinese 2000hp Land Rig Builders New 2000hp Chinese Rig 2000hp VFD Land Rig 2000hp new Land Rig From China New 2000hp Chinese Drilling Rig -----------------------------------------------------------------------------------------------------------------------------------------
Ingersoll-Rand T4W Drilling Rig - For Sale Drilling Rig - Ingersoll-Rand T4W - For Sale Model : T4W Manufacturer : Ingersoll-Rand Year : 1982 Condition : Used Description : 1982 Ingersoll-Rand T4W Drill Rig IR 900 CFM / 350 PSI Air Compressor Detroit 12V71 diesel deck engine Spur Gear top head (single motor) 8 pieces drill pipe (25ft x 4-1/2") Working order Location : Western Asia Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. ----------------------------------------------------------------------------------------------------------------- Search words (for official use only) : 1982 Built Ingersoll-Rand T4W Drilling Rig for Sale Ingersoll-Rand T4W Drilling Rig - 1982 Built - For Sale Used Ingersoll-Rand T4W Drilling Rig for Sale Ingersoll-Rand T4W Land Drilling Rig for Sale Ingersoll-Rand Drilling Rig for Sale ------------------------------------------------------------------------------------------------------------------
Schramm T64HB Drilling Rig for Sale Drilling Rig - Schramm T64HB - For Sale Model : T64HB Drill Rig Long Tower Manufacturer : Schramm Year : 1978 Condition : Used Description : 1978 Schramm T64HB Drill Rig - S/N: T64HB-1186 Long Tower with jib boom (9) 4-1/2" x 20ft drill rods included Rod rack Detroit Diesel Deck Engine Schramm 425 cfm / 250 psi air compressor Cat water injection pump (3) leveling jacks Table bushings Drill collar and steel tooth tri-cone included Mounted on a GMC 7500 Truck - VIN# TJV738V566193 13 Speed Transmission 6 Cylinder Detroit Diesel Engine 10.00-20 Tires Shows 60,940 Miles Note: Truck runs and drives when tested last Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. --------------------------------------------------------------------------------------------------------- Search words (for official use only) : Schramm T64HB Drilling Rig - 1978 Built for Sale Used Schramm T64HB Drilling Rig for Sale 1978 Built Schramm T64HB Drilling Rig for Sale Schramm T64HB Drilling Rig for Sale in USA Schramm Used Drilling Rig for Sale -------------------------------------------------------------------------------------------------------------
CME 45 Auger Drilling Rig for Sale Drilling Rig - CME 45 Auger - For Sale Model : 45 Auger Drill Rig Manufacturer : CME Drill Year : 1978 Condition : Used Description : 1978 CME 45 Drilling Rig Truck - Serial: 123884 Ford 4 Cylinder Gas Engine Hours : 358 Auto Hammer 2 winch lines 22ft 4" auger sections 5ft 8" auger sections 23ft 5ft boring rod extensions 8" rock bit 4" rock bit 8" auger bit Mounted on a 1997 Ford F450 Super Duty - VIN: 1FDLF47F8VEB32264 Miles : 235,967 on odometer 7.3L Power Stroke Diesel Engine Manual 5 Speed Transmission Suspension : Spring Brakes : Hydraulic GVWR : 15,000 lbs Wheelbase : 161" & Tire Size: 235/85R16 Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. -------------------------------------------------------------------------------------------------------------------------- Search words (for official use only) : 1978 Built CME 45 Auger Drilling Rig for Sale Used CME Drilling Rig for Sale CME 45 Auger Used Drilling Rig for Sale CME 45 Auger Land Drilling Rig for Sale CME 45 Auger Drilling Rig for Sale in USA ---------------------------------------------------------------------------------------------------------------------------------
Showing 49 to 96 of 605 results
.png)
.png)
.png)
.png)
.jpg)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
Search Here
