Generic Badger 1250 Drilling Rig for Sale Drilling Rig - Generic Badger 1250 - For Sale
Model : 1250 Drill Rig Manufacturer : Generic Year : 1995 Condition : Used
Description :
Badger 1250 Drill Rig Gardner Denver 427 Air Compressor Failing 5x6 Mud Pump 1250 Drawworks Bean Water Injection Pump 2003-1 DSM Table 2 Leveling Jacks 5 Speed Rotary Transmission Mounted on a 1995 Ford AeroMax Truck CAT 3406 Diesel Engine 8LL Transmission Mechanical Clutches Spicer 792 Transfer Case
Location : USA
Price & terms : Please enquire using the email form below.
If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you.
We can arrange delivery of equipment and towage of rigs and vessels where needed.
The details mentioned above are believed to be accurate but are not guaranteed.
--------------------------------------------------------------------------------------------------------- Search words (for official use only) : 1995 Built Generic Badger 1250 Drilling Rig for Sale Generic Badger 1250 Drilling Rig - 1995 Built for Sale Used Generic Badger 1250 Drilling Rig for Sale Generic Badger 1250 Used Drilling Rig for Sale Generic Badger 1250 Drilling Rig for Sale in USA -------------------------------------------------------------------------------------------------------
Generic MC 900 P Drilling Rig for Sale Drilling Rig - Generic MC 900 P DD for Sale Model : MC 900 P Drill Rig Manufacturer : Generic Condition : Used Description : 1 - Comacchio MC 900 P DD Drill Rig 1 - Comacchio MC 900 P RC Drill Rig Deutz BF 4M 1013 FC 112 KW/152 HP Diesel Engine 13 Ft Feed Stroke Rotary Head Double Head Winch - 4,966 Lb Foam Pump Triplex Pump D.T.H Lubricator Location : Africa Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. --------------------------------------------------------------------------------------------------------------------- Search words (for official use only) : Used Generic MC 900 P Drilling Rig for Sale Generic Drilling Rig for Sale Comacchio MC 900 P DD Drilling Rig for Sale Generic MC 900 P Drilling Rig for Sale in Africa Generic MC 900 P Land Drilling Rig for Sale -------------------------------------------------------------------------------------------------------------------------
Ingersoll-Rand 900 cfm / 350 psi Air Compressor For Sale Used Oilfield Air Compressor For Sale Model : XHP-900 cfm / 350 psi air compressor Manufacturer : Ingersoll-Rand Year : 1998 Condition : Used
Description 1998 Ingersoll-Rand 900 cfm / 350 psi Air Compressor Unit Serial # 289198UTD584 Compressor Serial # 9196RU99AG CAT 3406 Diesel Engine with Electric Start 17,152 Hours on gauge Serial #: 3ER02855 (engine) Arr. # 124-7634 Radiator, Gauges, Wagon & Skid Mounted Location : USA
---------------------------------------------------------------------------------------------------------------------------------------------- Search words(for official use only) - Ingersoll-Rand Air Compressor for Sale 350 psi Air Compressor for Sale Oilfield Air Compressor for Sale Ingersoll-Rand 900 cfm / 350 psi Air Compressor 1998 Ingersoll-Rand Used Air Compressor for Sale Used Air Compressor for Sale in USA -----------------------------------------------------------------------------------------------------------------------------------------------
Dredger for Sale 2007 Built Cutter Suction Dredger Technical Details Basic Details - Year Built : 2007 Rebuilt : 2014 Principal Dimensions and Characteristics Hull Dimensions - Length with ladder raised (approx.) : 25 M - New as per GA Waterline length (approx.) : 15 M - New as per GA Width : 4 M - New as per GA Depth : 1.6 M - New as per GA Draft : 0.8 M - New as per GA Engine Room Dimensions - Length : 7.35 M Width : 3.30 M Height : 1.75 M Base/side Fe430 B grade A RINA sheet thickness : 10 mm Deck Fe430 B grade A RINA sheet thickness : 8 mm Frame support spacing : 0.75M Side Pontoons Dimensions - Length : 15.50 M Width : 1 M Height : 1.5 M Base/side Fe430 B grade A RINA sheet thickness : 10 mm Deck Fe430 B grade A RINA sheet thickness : 8 mm Frame support spacing : 0.75M Control Cabin Dimensions - Length : 2.05M Width : 4.25M Height : 2M Base/side Fe430 B grade A RINA sheet thickness : 3 mm Deck Fe430 B grade A RINA sheet thickness : 3 mm Frame support spacing : 0.30M General Dimensions and Characteristics of Dredger - DWT : 56.3 GRT : 32.89 NRT : 29.73 Average Working Draft : 13.30M Dredging depth : 12M Fuel Tank Capacity : 5 ton Ladder Length : 12M Swing Anchors : 2 Swing Winches (2) - Axis power : 16 Ton Maximum speed : 20 M/min First layer pull : 60 kN Cable diameter : 22 mm Dredging Ladder Raising Winch - Axis power : 40 ton Maximum speed : 1M/DK Cable diameter : 40mm Drum capacity : 4 ton Swing Anchors : 2 Hydraulic Spud or Piles-Lifting Pistons - Force : 5 ton Stroke : 1.5M Spud/pile Stroke : 1.5M Crown-Type Cutter Head - Number of motors : 3 Axis power : 85 kW Speed range : 0 – 30 rpm Cutter diameter : 1350mm Axis diameter : 150mm - Lieu Number of blades : 24 Cutter weight : 200 kg Dredging Pump - Make/Model : Linatex MK300/250 Type : Centrifugal-rubber lined Impeller diameter : 600 mm Number of blades : 4 Particle clearance : 100mm Suction diameter : 320mm Discharge diameter : 300mm Speed : Max 900 rpm Capacity : 2250 cbm/hr Main Engine - Make/Type/Model : Cummins VTA 1710 / Eng No-837BA Power 2200 RPM : 650BHP @1500 rpm Number of cylinders : 12 Electric starting : Yes by Battery Dredging Pump Reduction Gear - Type/Model : ZF/BW 195 A Reduction ratio : 1.273-2.030 Oil Capacity : 23 Litres Approx Weight : 325 Kgs Nominal power : SAE HP X 1.014 Spuds/Piles - Number of Spuds/Piles : 2 Length (approx.) : 10M Diameter : 275mm Thickness : 7mm Weight : 750kg x 2 Steel tank capacity - Ballast Tank : 23 ton Fuel Tank : 5 ton LO Tank : 80 litres Others : Hydraulic oil tank : 1 ton Consumption - Fuel - While dredging : 82Litres/ hr Fuel - While Idling : 35Litres/ hr LO : 110 grams / hour Excavator (Optional – Removed & kept – can be installed if required) - Operating depth : 5M Excavating Qty in M3 : 0.5m3 Operating mode : 4 Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. ------------------------------------------------------------------------------------------------------------------------ Search words(for official use only) : Cutter Suction Dredger - 2014 Rebuilt - for Sale Cutter Suction Dredger for Sale in Turkey 2007 Built Dredger for Sale New Built Cutter Suction Dredger in Turkey 56.3 DWT Cutter Suction Dredger for Sale -------------------------------------------------------------------------------------------------------------------------
Solar and Generator Container for Sale Ready Solar and Generator Container Solar and Genset Container for Sale Solar + Genset Containers Hybrid Solar and Generator Containers Solar and Generator Container Inverter : Surge Output RA.C-SG6 -Type 1 (2) : 12 kW RA.C-SG12 -Type 2 (4) : 24 kW RA.C-SG18 -Type 3 (6) : 42 kW RA.C-SG24 -Type 4 (6) : 42 kW RA.C-SG30 -Type 5 (10) : 70 kW Inverter : Rated Output RA.C-SG6 -Type 1 (2) : 6kW RA.C-SG12 -Type 2 (4) : 12kW RA.C-SG18 -Type 3 (6) : 18 kW RA.C-SG24 -Type 4 (6) : 18 kW RA.C-SG30 -Type 5 (10) : 30 kW Inverter : AC Voltage RA.C-SG6 -Type 1 (2) : 230VAC 50Hz RA.C-SG12 -Type 2 (4) : 230VAC 50Hz RA.C-SG18 -Type 3 (6) : 230VAC 50Hz RA.C-SG24 -Type 4 (6) : 230VAC 50Hz RA.C-SG30 -Type 5 (10) : 230VAC 50Hz Inverter : PHASE RA.C-SG6 -Type 1 (2) : 1 or 3 ph RA.C-SG12 -Type 2 (4) : 1 or 3 ph RA.C-SG18 -Type 3 (6) : 1 or 3 ph RA.C-SG24 -Type 4 (6) : 1 or 3 ph RA.C-SG30 -Type 5 (10) : 1 or 3 ph Solar Array Inverter : kWh per day RA.C-SG6 -Type 1 (2) : 22.050 kWh RA.C-SG12 -Type 2 (4) : 44.100 kWh RA.C-SG18 -Type 3 (6) : 66.100 kWh RA.C-SG24 -Type 4 (6) : 88.200 kWh RA.C-SG30 -Type 5 (10) : 110.250 kWh Inverter : Number of Panel RA.C-SG6 -Type 1 (2) : 18 RA.C-SG12 -Type 2 (4) : 36 RA.C-SG18 -Type 3 (6) : 54 RA.C-SG24 -Type 4 (6) : 72 RA.C-SG30 -Type 5 (10) : 90 Inverter : Module watts each RA.C-SG6 -Type 1 (2) : 245 Watts RA.C-SG12 -Type 2 (4) : 245 Watts RA.C-SG18 -Type 3 (6) : 245 Watts RA.C-SG24 -Type 4 (6) : 245 Watts RA.C-SG30 -Type 5 (10) : 245 Watts Inverter : Total Array Watts RA.C-SG6 -Type 1 (2) : 4410 Watts RA.C-SG12 -Type 2 (4) : 8820 Watts RA.C-SG18 -Type 3 (6) : 13220 Watts RA.C-SG24 -Type 4 (6) : 17640 Watts RA.C-SG30 -Type 5 (10) : 22050 Watts Battery Inverter : Size in Amp-Hours RA.C-SG6 -Type 1 (2) : 1500 Ah RA.C-SG12 -Type 2 (4) : 1500 Ah RA.C-SG18 -Type 3 (6) : 1500 Ah RA.C-SG24 -Type 4 (6) : 1500 Ah RA.C-SG30 -Type 5 (10) : 1500 Ah Inverter : Bank Voltage RA.C-SG6 -Type 1 (2) : 48 VDC RA.C-SG12 -Type 2 (4) : 2 X 48 VDC RA.C-SG18 -Type 3 (6) : 3 X 48 VDC RA.C-SG24 -Type 4 (6) : 4X 48 VDC RA.C-SG30 -Type 5 (10) : 5 X 48 VDC Inverter : Bank Storage RA.C-SG6 -Type 1 (2) : 72 kWh RA.C-SG12 -Type 2 (4) : 144 kWh RA.C-SG18 -Type 3 (6) : 180 kWh RA.C-SG24 -Type 4 (6) : 288 kWh RA.C-SG30 -Type 5 (10) : 360 kWh Inverter : Genset RA.C-SG6 -Type 1 (2) : 7 kWh RA.C-SG12 -Type 2 (4) : 14 kWh RA.C-SG18 -Type 3 (6) : 21 kWh RA.C-SG24 -Type 4 (6) : 28 kWh RA.C-SG30 -Type 5 (10) : 35 kWh Price & terms : Please enquire using the email form below If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. ------------------------------------------------------------------------------------------------------- Search words (for official use only) : Solar and Generator Container for sale Hybrid Solar and Genset Container for Sale Solar and Genset Containers Hybrid Solar and Generator Containers Ready Solar and Genset Containers --------------------------------------------------------------------------------------------------------------------
Drill Pipes 4-1/2" for Sale Unused Drill Pipes for sale 9.5 meters long Drill Pipes Description Brand New 4-1/2” OD X E-75 steel grade, 13.5 ppf nominal weight, 9.5 meters, Drill pipe with 4” API IF Box up – Pin down connection with pressed steel thread protector, tool joint 2” longer than standard. Pin 9” , Box – 12”, 18 degree tapper at box end and 35 degree at pin end. Technical Specification of Drill Pipe Description / Specification Length : 9.5 mrts Body size : 4 ½” OD Thread conn. : 4 ½” IF pin & box PPF : 13.75 Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. ------------------------------------------------------------------------------------------------------------------------------ Search words(for official use only) - Drill Pipes 4-1/2" for Sale Brand new Drill Pipes for Sale in India Unused 9.5 meters long Drill Pipes for Sale Drill Pipes for Sale in India 4-1/2" Drill Pipes of 1500 meters for sale ------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------------
Skytop RR 400 Double - 4200m - Used Workover Rig - For Sale Workover Rigs For Sale 4200m Used Workover Rigs For Sale
Skytop RR400-H1-4210A-38 Self-propelled, double drum,back-in Rated capacity at 4,200 m w/73 mm tubing Engine - detroit diesel 8V-92 (268 kW/360 hp) Transmission - allison CLT 5860 - 6 speed Main drum brakes - 25.4 cm x 106.7cm Hydromatic brakes – Parmac 122 w/1,500 l fluid capacity Sand line brakes - 20.3 cm x 96.5 cm Mast - skytop 107-180 X f rated 80,000 daN w/six lines Racking capacity - 4,200 m – 73 mm double tubing 4,400 m - 19 mm triple rods Travel blocks - McKissick 73A 100 ton c/w spring Lights - vapour - proof incandescent & quartz floods Drilling line - 25.4 mm x 518 m wire rope Sand line - 14 mm x 3,700 m wire rope Weight indicator
Combination : 3.05 m x 12.2 m steel building 3.05 m x 4.8 m change house 3.05 m x 4.6 m tool house 3.05 m x 2.7 m generator house 55 kW - Isuzu diesel generator
Handling equipment : Foster 58 - 93 tubing tongs c/w air back-up Cavins model C power air slips BJ elevators Standard equipment - 60.3 mm & 73 mm EUE tubing 19 mm - 25 mm sucker rods 2 - 2.4 m x 13.7 m rig mats Catwalk w/2 sets of pipe racks
Safety equipment : 4 - 14 kg dry chemical fire extinguishers 2 - self-contained breathing apparatus w/spare cylinder
Gas detector Safety & directional signs Electrical ground bonding equipment 1 stretcher Crown saver Pipe ram saver 2 self retracting lifelines
BOP equipment : AEUB class III BOP 152 mm - 35,000 kpa shaffer spherical 152 mm - 35,000 kpa shaffer LWS with valve Rucker - 340 l - 21,000 kpa accumulator w/3 station controls & nitrogen back-up system Hoses, remote station 73 mm EUE - 35,000 kpa tubing safety valve 89 mm rod BOP c/w handles HD hydraulic oil saver 76 mm x 9.1 m swab lubricator w/jars & tool trap 76 mm swabbing valve - 21,000 kpa
The details mentioned above are believed to be accurate but are not guaranteed. ------------------------------------------------------------------------------------------------------------------------------------ Search words(for official use only) - Skytop RR 400 Double - 4200m Used Workover Rig for sale Used American Workover Rigs Workover Land Rigs in USA Used 4200m Skytop RR 400 Double Workover Rig for Sale Land Workover Rigs For Sale Workover Rig for sale Skytop RR 400 Double (4200m) for sale -------------------------------------------------------------------------------------------------------------------------------------------
If you cannot find the Mobile Hospital Unit that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you.
Atlas Copco T30 Power ROC Crawler Drilling Rig for Sale Drilling Rig - Atlas Copco T30 Power ROC Crawler - For Sale Model : T30 Power ROC Crawler Drill Rig Manufacturer : Atlas Copco Year : 2016 Condition : Used Description : 2016 Atlas Copco T30 Power ROC Crawler Drill Rig S/N: TMG16SED 0064 4522 Hours Cummins QSB4.5 Diesel Engine - rated 155 HP Drifter YD14S - S/N: AVO15D408 Main Pump Rebuilt 1500 Hours Ago Both Final Drives (Rebuilt 200 Hours Ago) Set Up for T45 Hole Size 1.75 TO 3.5" 14 FT Start 12 ft Drilling Steel Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. -------------------------------------------------------------------------------------------------------------------------------------- Search words (for official use only) : Atlas Copco T30 Power ROC Crawler Drilling Rig - 2016 Built for Sale 2016 Built Atlas Copco T30 Power ROC Crawler Drilling Rig for Sale Used Atlas Copco T30 Power ROC Crawler Drilling Rig for Sale Atlas Copco Crawler Drilling Rig for Sale Atlas Copco T30 Power ROC Crawler Drilling Rig for Sale in USA ---------------------------------------------------------------------------------------------------------------------------------------------
EMSCO GB 500 Drilling Rig for Sale EMSCO GB 500 +/- 12,000' Drilling Rig (1200hp) Drawworks EMSCO GB 500, Ser. 108 w/ twin engine compound P/B (2) C18 Cat Engines 630 hr. 1200 HP, Ser #WJH00470 & Ser #WJH00474, Torque oil works model #C195-100 Type F Ser # 1218 & Ser # 1220, air compressor Gardner Denver, id #A9G9999, hydromatic Parkersburg 40” SR Ser #39897, Catheads Kelco model #16LB Ser #DD0A & Ser #HR80 Derrick Lee C. Moore 131’, 8 line crown and block 1 1/8”, 425,000# SHL Substructure Split type with boosters for one (1) piece haul, “New,” 21.6W x 50L x 12H Mud Pumps D500 EMSCO’s, (#1) Ser #367 P/B Cat 353 Ser # 46B393, (#2) Ser #400 P/B 12V 71 Detroit Mud System (2) pit system, 600 bbl, “New”, 500 bbl with Hopper stirrers & agitators, 50 HP electric Harrisburg mix pumps Generators/Utility House 7.1w x 8H x 30L, (2) Cat 3306 engines with 155 KW generators 240 volts 2/220, step down Gardner Denver 240 electric air compressor, “New” Rotating Equipment 20 ½ EMSCO, Kelly 5 ¼ hex with 65/8 box, 4 ½ XH pin, 40’ long with Varco 5 ¼ hex bushing roller type, “New”, Swivel EMSCO LB 200 Traveling Equipment 250 Ton McKissick Traveling Block, BJ type B tongs, 2 ¾” x 96” BJ elevator links “New,” 250 ton BJ elevator “New” Well Control Equipment 11” Double Ram 3000# Shaffer, 11” 3000# Hydril Rig Houses 7.6’ X 32’ X 7’ Top Dog House, 7.1W x 8H x 40L Change House “New” Water/Fuel Tanks 7.1W x 8H x 40L Water Tank “New”, 12,000 gallon 7.1’ x 40’, 1” air diaphragm Fuel Pump Catwalk 4’W x 42”H x 40’L, “New”, (3) sets pipe racks, (6) pipe baskets Drill Pipe / Collars Chinese drill pipe 12,000’ of 4 ½” G195 16.6# “New” drill pipe. 21 collars 6 ½” x 2 ¼” Auxilliary Items (4) sets steps, V-door, derrick stand, assorted bit subs & change overs, 10 hand subs, D.P. – DC – casing slips, safety clamps, 2 x 2 ¾ electric wash down pump, hose lines & fittings, 3500 drilling line & stand, electric boxes & all new wire, Kelly hose, vibrating hose, unions For more details, please see : http://www.worldoils.com/landrigs/rig248.php Price & terms : Please enquire using the email form below.
---------------------------------------------------------------------------------------------------------------------------- Search words(for official use only) : EMSCO GB 500 Drilling Rig - 1200hp for Sale Oil Rigs Oil drilling land rigs 1200hp Land Drilling Rig Drilling Rigs for Sale EMSCO GB 500 +/- 12,000' Drilling Rig -------------------------------------------------------------------------------------------------------------------------------
New Tug For Sale Newbuilding 1658BHP 26M Towing Tug 1600BHP Towing Tug For Sale
Principal Particulars Class : GL Length overall : 26.00m Length B.P. : 23.98m Breadth moulded : 8.00m Depth moulded : 3.65m Draft moulded : 3.00m Trial speed : approx 10 knots Designed bollard pull : 22 tonnes (approx) Machinery Main Engine : Yanmar 6AYM-ETE, 2 x 829BHP / 1900 rpm Gear box : Yanmar YXH 240 L, Ratio: 5.91:1 Propeller : 2 x solid fixed pitch propellers Main generator : 2 x 28KVA Cummins / Yanmar Tankage Fuel oil : 153M³ Fresh water : 46M³ Ballast : 29M³ Deck Machinery Anchor : 2 x stockless bower anchors (420kg) Chain Cable : Nine (9) lengths of Grade U2 chains Anchor Windlass : 17.5mm anchor windlass Towing Hook : 1 x 25 tons
Navigation & Communication Equipment Echo Sounder : 1 GPS : 1 Radar : 1 4” Spare Magnetic Compass : 1 SSB & VHF : 1 EPIRB : 1 Battery Clock : 1 Barometer : 1 Searchlight : 1 Floodlight : 3 Clear View Screen : 1 High Steering Wooden Chair : 1 Auxiliary Equipment Bilge & Ballast pump : Power: 1 x 2.2HP / 1.65kw / 415v50Hz Q (1/min): 50 – 170 H (m): 42 -22 GS & Fire pump : Power: 1 x 2.2HP / 1.65kw / 415v50Hz Q (1/min): 50 – 170 H (m): 42 -22 Fresh water pressure set : Power: ½ HP Suction head (m): 8 Max. Quantity (1/min): 48 Sea water pressure set : Power: ½ HP Suction head (m): 8 Max. Quantity (1/min): 48 Fire Fighting System 2’ Firehouse + Hydrants : 3 sets Fire Extinguisher : 9 nos Fireman Axe : 1 Scoop & Sand Box : 1 Fire Bucket : 3 Anchor Ball : 3
Life Saving Equipment Life Raft : 2 units (10 men) Life Buoy : 8 pcs Life Jackets : 14 pcs Parachute Distress Rocket : 12 pcs Fireman Outfit : 1 set Accommodation Total Complement : 10 Crews Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed.
------------------------------------------------------------------------------------------------ Search words ( For official use only) : Towing Tug for sale Towing Tug for sale in Singapore Newbuilding Towing Tug for sale in Asia 1600bhp Towing Tug for Sale Tug For USA Tug For Columbia 1658 bhp towing Tug Tug For South America Tug For Mexico New Towing Tug For Sale in Singapore Tug For Trinidad --------------------------------------------------------------------------------------------
Wire Rope and Umbilical Spooling Units for Lease Umbilical Spooling Unit for Hire 200 KIP Spooling Unit for Lease Wire Rope Spooling Unit for Charter Spooling Unit for Hire - 52,000 lbs Specifications Spooling Unit : 52,000 lbs Hydraulic Power Unit (HPU) : 8,500 lbs Spool Flange Diameter : 223 in Spool Width : 117 in Shaft Diameter : 6 in 12 in Approx. Air Required : 100 psi 375 cfm Water : 80 GPM for heat exchanger Male Camp Lock : 2 in Female Camp Lock : 2 in Input and Discharge Hose : 50 ft Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. ----------------------------------------------------------------------------------------------- Search words(for official use only) - Wire Rope and Umbilical Spooling Units for Lease Umbilical Spooling Units 52,000 lbs Spooling Unit for Hire 200 KIP Spooling Unit -----------------------------------------------------------------------------------------------
Schramm TXD Drilling Rig Package for Sale Schramm TXD Drill Rig & Package - 2013 Built for Sale Model : TXD Drill Rig & Package Manufacturer : Schramm Year : 2013 Condition : Used
550hp Workover Rig for Sale 2008 built Workover Rig Used Workover Rig
Service Conditions : The rig is capable for undertaking work over operations in Oil/ Gas / Injection / Effluent disposal wells/CBM wells etc. up to depth of 3000 mts approximately with tubing string of 2 7/8" to 3-1/2" in 5" to 9 5/8" casings, depending on the weight of completion equipment. The work over jobs include but are not limited to servicing/ installation of artificial lift equipment, cleaning of well bore, gravel packing, sand screening, stimulation, well abandonment, transfer of horizons, water shut off, gas shut off, water injection profile modification and re-completion, retrieval of gravel pack assembly, fishing & releasing of stuck up, multi-layer testing, casing repair etc. in vertical/deviated/horizontal multilateral / ERD / USRD wells etc.
1. Workover Rig The Rig XJ 550 is a brand new self propelled rig and capable of workover / testing / completion/service upto 5800m using 2 7/8 " drill pipe and and 4500m using 3 1/2" drill pipe. The rig is having the hook load capacity of 135 ton and manufactured as per latest API standards applicable in the oilfield Industry.
The rig is equipped with : a) Four leg leaning type, Hydraulically telescoping, two section, foldable, SJ Petroleum Machinery Co., China make, Model JJ135/34 Mast with clear height of 112 ft from ground level and rated static hook load capacity 135 T with 8 lines strung on traveling block.
The mast is designed as per latest API 4E/4F standard code and practice. The Mast can is equipped with suitable Finger Board which can accommodate 5200 mts of range-II, 2 7/8" tubulars in doubles.
b) Twin safety device (floor-o-matic and crown-o-matic) is available. c) Top man escape device will be provided. d) Suitable locking system would be provided with additional safety manual lock for telescoping of mast to full height. e) The mast is designed to withstand wind speed of minimum 60 knots as per Clause 6.2.3 of API 4F with full pipe/ setback with all guy ropes properly placed as per standard API pattern. f) Hydraulic Cat works : For make up & breakout consisting of hydraulic make up (spinning) cylinder providing 10000lbs (4444kg) minimum line pull and hydraulic break out cylinder to develop a minimum line pull of 20000lbs. Control for make up & breakout is located at Driller's console. g) Draw works with suitable rating for handling 100MT hook load capacity, equipped with suitable auxiliary hydromatic brake for safe running in of the string. The Draw works should have sufficient range of forward speed and one reverse speed.
XJ 550 Draw Work Input HP rating 550 HP. Nominal depth rating 2000 mts with tubing, fitted with compatible mechanical brake system and driven by a suitable Detroit make diesel engine. Draw works having 4 forward and one reverse speed. Draw works drum having main drum Lebus Groove for 1 1/8” line. Main drum brake having maximum wrap around feature energizing type brake. Crown-o-matic protection device to protect the Crown is also provided. g) The draw works is powered by 1 no. of "CATERPILLAR"make, model C-15 ACERT diesel engine of 540 HP at 2100 rpm with ALLISION make, heavy duty transmission consists of torque converter, model "M5610AR" and suitable power trend through compound/chain drive and gear boxes.
The power pack is perfectly suitable for effective hook load of 135 MT and to work on 5000m deep well. The power pack is completed with standard gauges, meter, safety equipment and spark arrestor. Engine is equipped with independent interlock pneumatically operated starting system during the workover mode and the electric starting system during the roading.
h) SJ Petroleum Machinery Co. make Model "YG-150"hydrahook with combination block having 4 nos. of sheavesof 30" diameter. The hook has built in hydraulic snubber,conventional rotation lock and safety positioner etc.,rated capacity is 150 tonne and is capable to operate 2-7/8" to 3-1/2" tubing and 2-7/8" to 3-1/2" drill pipes up to required depth.
j) Racking Board is of adjustable type and completed with topman emergency escape device from monkey board to ground, railings & safety belts. The Racking Board is having sufficient provision to rack 3 1/2" / 2 7/8" tubulars/drill pipes for 5000m Drill pipe/ 6000m tubing and having provision for height adjustment at three different convenient positions.
2. Substructure S J Petroleum make Sub-Structure,made as per API-4F rigid type, completed with all respect to carry out drilling jobs, 13' below the rotary beam. Substructure having sufficient space to accommodate the 3 stack BOP (one Pipe Ram + One Blind Ram+ one Annular) with riser nipple in workover mode. The structure is completed with rotary beam, railing,side platform, setback area and stair way. The sub-structure can accommodate 17 ½” Rotary Table on it.
3. Rotary Equipment SJ Petroleum Machinery Co., China make, Model "ZP175"or equivalent rotary table with 17.5" opening without master bushing.
The table is completed with master bushingand kelly bushing.The rotary table is driven by chain-sprocket and the mechanism is powered by the drawworks.
4. Kelly 40 feet Square / hexagonal Kelly 3" size as per API 7 suitable for working upto 350 kg / cm2 (5000 psi) working pressure with required connections along-with saver subs will be provided. Upper and lower Kelly cock of suitable size with pressure rating of 5000 psi will also be available.
5. Swivel a) SJ Petroleum Machinery Co., make, Model "SL-135", rotary swivel having static/dead load capacity of 135 tonnes and working pressure rating 5000 psi and completed with bail bumper support, goose neck connection to rotary hose etc. Swivel bottom pin connection 6 5/8" API regular left hand.
(b) With 3” diameter quick change goose neck assembly with working pressure 5000 psi.
6. Hydraulic Winch The Rig is provided with minimum 1 no. of hydraulic winch with catline for handling tubulars having pulling capacity not less than 3MT.
7. Mud System Mud system is capable to handle drilling mud Sp. Gr. upto approximately 1.8.
7.1 Mud Pump (a) BOMCO China Make, model "F-500" triplex slush pump rated at 500 HP, unitized to a reputed Make diesel engine having sufficient capacity, through belt drive compound with shaft or chain drive is acceptable and 5 speed heavy duty gear box with Centrifugal supercharging pump, having pulsation dampener, safety relief valve, pressure gauge etc.
Mounted on a steel oil field skid, 20 gallon, heavy duty Type-F 6000 psi mud gauge, Pumps dressed with 3 1/2" to 6" liners as per operational requirement. The pump is capable of handling work over operation in 5 1/2"casing with 2 7/8" tubular upto a depth of 6500 mts. with mud of specific gravity- 2.3.
(b) Capacity of Pump Discharge : Minimum 12 cbm / hr. at 5000 psi. Minimum 52 M3 / hr. at 2000 psi.
7.2 Discharge System a) Rotary hose of suitable size having working pressure of 350 Kg/Cm2 (5000 psi) with suitable connections will be provided. b) Suitable end connections of suction line and delivery manifold will be provided. c) Stand pipe of suitable size and pressure rating along with pressure gauge is also present.
7.3 Mud/Work over fluid storage/ Handling arrangement i) Tanks having capacity (volume) not less than 80 cubic meter with permanent level markings from bottom will be provided. ii) Arrangement is provided for brine/mud preparation, mud mixing, mud agitators / bottom gun jets of best engineering iii) Transfer pump for working fluid / mud from tankers into tank and tank to tank and back to tanker (if required) along with pumping system. iv) Necessary system lines wherever required. v) Calibrated mud hopper of suitable size with butterfly valve and proper line connection will be provided with gunning arrangement. vi) One trip tank of approximately 8 m3 with suitable connections and valves will be available. It will be equipped with sufficient capacity of centrifugal transfer pump & motor suitable for hazardous area. vii) Skid mounted / portable filtration unit for brine to get the out let brine solution of 5 micron quality at flow rate 40M3/hr at working pressure 10Kg/cm2 after fine filter with suitable motor for hazardous area .
8. Fuel Storage Sufficient fuel storage to undertake the workover operations will be provided
9. Water Storage Tank with storage Capacity of 40 m3 equipped with transfer pump of suitable capacity with necessary hook up lines/ system will be provided.
10. Well Control Equipment The following well control equipment will be provided : a) Hydraulically operated Cameron / Shaffer / Hydril make, one double ram type Blow Out Preventor of 7-1/16" X 5000 PSI working pressure having one set of blind ram and one set pipe rams to handle size 3-1/2" and 2-7/8". b) Hydraulically operated Cameron / Shaffer / Hydril make, one annular Blow Out Preventor of 7- 1/16"X5000 PSI working pressure. c) Or one no of 3 stack unitized BOP containing items as mentioned at a) & b) above. d) One set of stem & wheel for manually closing BOP as per OISD standard-174. e) One. No of shanghai shenkai petroleum chemical equipment, 6/8 bottle hydraulic control unit, capable of operating the BOP with suitable Pneumatic and electric motor driven pump. The system pressure is 3000 PSI. Necessary 1" BOP control hose to connect BOP with control unit.
1 (one) nos., of remote control unit placed on drillers console. Unit will have two charging systems i.e. Pneumatic and electric with auto start and stop facility. Flame proof DGMS approved motor will be used. One set of stem and wheel to operate the BOP mechanically.
f) Adapter flange/ spool/dummy spools of following size will also be available :- Change over spool 7-1/16" 5000 psi x 7-1/6" 10000 psi - 1 no
g) 1 no. BOP test plugs or Cup tester/ accessories will also be provided.
h) Plug valves, tubing shut off valve and FOSV of 5000 PSI having necessary connections and changeovers for 2-7/8" & 3-1/2" NU /EUE tubings/ Drill pipes will also be provided.
11. Choke and Kill Manifold Choke & Kill manifold is as per API of size minimum 2-1/16" having minimum 5000 psi WP along with sufficient quantity of flexible steel piping of minimum 5000 psi WP of suitable size fitted with NRV in kill lines. It has a suitable combination of valves having provision to flow the well through fixed choke, variable choke and one bypass also. There is also a provision to kill the well through kill line as well as one additional line for making connection through cementing.
12. Handling tools as per API 8C a) Center latch elevator for minimum 100MT capacity and minimum 01 no. for each category will also be provided.
Sizes 2-7/8" : Upset Tubings 2-7/8" : Plain Tubings 3-1/2" : Plain Tubings 2-7/8" : I.F Drill Pipe 3-1/2" : I.F Drill Pipe 3-1/2" : Upset Tubing b) Elevator links Elevator links-forged as per API 8C, rated capacity-minimum 100MT, size 1-3/4"x72". qty 2 nos will be provided.
c) Power (Pneumatic) slips We will provide Light Weight pneumatic slip/spider, with sufficient spares, inserts suitable for 2-7/8" and 3-1/2" tubing and drill pipes along with all associated connections, hoses and Couplings. Operating valve at driller's console.
d) Hydraulic tubing tong (Qty-1) A Light weight hydraulic tubing tongs as per relevant API for 2 7/8" and 3-1/2" tubings with replaceable jaws minimum torque rating 8000 ft lbs along with sufficient spares would be provided.
e) Heavy duty Tong. (Qty-02) Range 2-3/8" to 4-1/2", and to handle all fishing tools and milling tools as per relevant API, torque rating minimum 35000 ft-lbs with hanger arrangement along with sufficient spares will also be provided.
f) Handling Tools for Sucker Rods and Polished Rods Tongs & elevators for handling 5/8", 3/4", 7/8", 1", 1-1/8" & 1-1/4" sucker rods and polished rods will be provided.
13) Cross Over Subs Bit subs, cross over subs and all necessary subs to handle work with 2-7/8" & 3-1/2" tubing and drill pipe string or their combinations will be provided.
14) Rig instrumentation suitable for Hazardous area. a) Deadline weight indicator with sensator/ load cell on driller console/control panel, indicating load on hook for the designed capacity of the rig will be provided. b) Suitable recorder for recording hook load will be provided and it will be mounted in weight indicator box c) Mud pump pressure indicator would be complete, on drillers console/control panel. 0- 6000 PSI. d) Mud pump pressure gauge is mounted on stand pipe of 0-6000 PSI. e) SPM indicator for mud pump discharge at drillers console/ local mud pump control panel. f) Indicators for B.O.P rams open/close for blindram, pipe rams & annular BOP on drillers console/control panel is provided.
15. Safety Equipment The rig is equipped with following fire fighting & safety equipment : I. Fire fighting system as per OISD standard -189 :- Para 6.0 i) Fire water storage facilities with fire pump. ii) Portable Fire extinguishers. Para 11.0 - Material specification of Fire water system. Para 12.1 - Fire alarm system. II. Explosion proof rig lighting at all hazardous locations as per Indian Oil Mines Regulation in force. III. Flame proof portable lamps (minimum 2 nos.) IV. Emergency Kill system for derrick engine (control from driller's panel). V. Electrical system will have suitable ELR (Earth leakage relay) VI. First aid box with stretcher facilities as per OISD standards - 204 para 6.5 and Annexure - H. VII. Safety kits & liveries (as per standard statutory body) will be provided for operating personnel. Top man safety belt also to be provided. VIII. All the rotating parts must have proper safety Guards.
16. Drill String a) Drill pipes 2-7/8" OD IF Right Hand, G grade of 10.4 ppf, premium Class I, Range II, 3000 meter will be provided with rig along with latest NDT certificate. b) Drill collars of sizes 3-1/2" of total length 50m with cross over to run 2-7/8" & 3-1/2" drill pipe will be provided.
17. Other Equipments The following equipment will also be provided : a) Air system: Air compressor system of suitable capacity with air tank for operating pneumatic Cellar pump, Hydraulic pump of BOP control unit etc. b) Rig warehouse and POL store. c) Rig In-charge Office. d) One A/C bunk house for coordinator. e) One bunk house for Contractor's operating personnel. f) V door & cat walk with pipe racks on both sides. g) Necessary transport equipment for movement of rig from one location to another. h) Cellar pump- Air operated (Pneumatic) with suction hose of sufficient length. i) Circulating head 5000 psi working pressure for 3-1/2" and 2-7/8" Drill pipes and tubings with necessary change over j) All trailor mounted equipments including rig trailor will meet the RTO regulation including Registration k) POWER GENERATOR: 2 nos. 125 KVA power generators, powered by Kirlosker/ Cummins or equivalent make diesel engine with "STAMFORD/JYOTI" make alternator and properly designed control panel for rig operation and illumination of work area with each other. l) Sufficient number of suitable flanges, chicksens/ flexible joints and rubber hoses for making all types of connections for working pressure 5000 psi will be available, m) Welding machine/ Welding transformer powered by contractor's Gen Set along with all associated welding and oxy - acetylene cutting accessories, gases and consumables etc. n) Potable water storage, filter and water cooler, o) One no of red aviation light flickering type fitted with lamp at crown block shall be available having independent circuit. p) Mud balance q) All rig equipments and facilities like bunkhouse store etc. will have effective double distinct earthing system as per IER 1956. Price & terms : Please enquire using the email form below.
The details mentioned above are believed to be accurate but are not guaranteed. ----------------------------------------------------------------------------------------------------------------------------- Search words (for official use only) : 550hp Workover Rig For Sale in India Used Workover Land Rig 550 HP Workover Rig For Sale in the Middle East 2008 built Workover Rig for sale in India Used Workover Land Rig 550 HP For Sale Land Workover Rig For sale - 2008 built Workover Rig - 550hp - 2008 built Used Workover Rig for Sale in the Middle East -----------------------------------------------------------------------------------------------------------------------------
Twin Screw Tugboat - 2400bhp For Sale 2400bhp Twin Screw Tugboat For Sale - 2004 built Used Twin Screw Tugboat For Sale General Class : Bureau Veritas Type of Vessel : Tugboat Built : 25 Nov.2001 / 2004 Bollard Pull : 30 MT Dimension and Capacities : Length O.A (Mld.Hull) : (27.03 M - Art.2 (8) by NKK) Breadth / Beam (Mld.) : (8.53 M – Reg.2 (3) by NKK) Moulded Depth : (4.27 M – Reg.2 (2) by NKK) Moulded Draught : 3.55 meter (Reg.4(2) ) GRT/NRT : 229 / 69 Fuel Tank max : 150 tonnes Fresh Water Tank max : 40 tonnes Speed/ fuel consumption (Free Running) Max Speed : 11.8 knots/ 6.25 MT Service Speed : 9.24 knots / 4.1 MT Main Engines : Cummins KTA38 – M2, 2 x 1200 HP ( 895.2kw) @ 1800rpm, 12 unit cyl, Manu date : 23 Dec 03. Reduction Gear Transmission : 2 units, Rentjes, Model WAF 526L, Ratio 5.05 : 1, Manu date 2004. Generator Sets : 2 units 60KVA Cummins 6BT5.9 – G6, 143hp (107kw) @ 1500rpm Propeller : Fixed propeller blade, 4 blades, Manganese Bronze, pitch 1.422 mtrs, dia 1.911mtrs Shafting : Solid, taper with key, material KSUSF 316, dia.139.7mm, 5.229 mtrs. Stern tube brg type : Cutless bearing, Rudder brg type: Cutless bearing. Alternator : 2 units, Stamford UC1274C1, KVA Base rate 97.5, KW Base rate 78, 50Hz, 1500 rpm, 400V, 3 Phase, Current at 0.8 pf 140.7A. Towing winch : Hydraulic towing winch HY TW SP-30T, Bollard Pull Cap. 30T, Manu date 16 May 2004. Anchor Windlass : Model 480-HY 6999, max torque cap 2 tons, power pack 10 tonnes Safety Equipments : Life Raft with HRU (Hydrostatic Release Units) 2 Units, Type – KHA - 10 Lifebouy No attachment – 2 units 30M Lifeline – 2 units Self-Lighting Floating lamp – 2 units Smoke signal and self-lighting floating lamp – 2 units Fire Extinghuishers : 9KG Type – 8 units, Type Sri ABC 45KG Type – 1 unit, Type: Sri ABC Hand Flare Signal – 6 units Rocket Parachute – 12 units Life Jacket – 14 units Marine Fireman’s Outfit Set ( 7 item) Radio & Navigation Equipment : AUTO PILOT SYS-Gyro Compass Model MKM022 Maker Yokogawa Denshikki co.ltd, Heading repeater model NT920AHR2, Maker Navitron sys ltd havant hants U.K. SSB RADIO – Antenna JRC, NFC – 196, Radio telephone JRC, JSB – 196GM, safe dist 1.5 mtrs, DSC/NBDP Modem JRC, NCT – 196N safe dist 1.5mtrs. VHF DSC RADIO TELEPHONE SAMYUNG ENC, STR – 580D GMDSS receiver NAVTEX, NAV5, Compass safe dist 1 mtrs, 10VDC- 30VDC. ECHO SOUNDER –Furuno, FCV – 667, 11VDC-30VDC, 50kHz- 200kHz. GPS NAVIGATOR –GP-32, Display unit compass safe dist standard 0.8mtrs, Steer 0.5mtrs, Antenna Unit GPA – 017 MARINA RADAR –Furuno 1721 Mark –2, Display unit RDP – 098, Compass safe dist- standard 0.5mtrs Steer 0.4mtrs, Antenna unit RSB – 0067, Compass safe dist- standard 1.8mtrs, Steer 1.4 mtrs. Navigation Lights : Anchor light – 1 unit Masthead light – 3 units Port light – 1 unit Starboard light – 1 unit Towing light – 1 unit Stern light – 1 unit All round white light – 2 units All round Red light – 2 units All round green light – 1 unit MakerJ.H Peters & Bey.22525 Hamburg Fire Fighting Equipment : Portable; 8 x 9 litrs foam, 5x3kgs CO2, 3 x 6kgs dry powder, 2x8kg dry powder, 1x 45 litrs foam. Accommodation : 2 x 2 berth, 1 x 8 berth 2WC pedestal with seat, I shower, 1 wash basin.
Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you.
------------------------------------------------------------------------------------------------------- Search words : Towing Tug for sale in Singapore 2400bhp Twin Screw Towing Tug for Sale Used Towing Tug for sale in Asia Towing Tug from Malaysia Towing Tug For USA Tugboat For South America Tugboat For caribbean Towing Tug for sale 2400 bhp Twin Screw Tug -------------------------------------------------------------------------------------------------------
Drilling Rig - Failing Holemaster For Sale Failing Holemaster 3000-CF Drill Rig for sale
Model : 3000-CF Drill Rig Manufacturer : Failing Condition : Used Description : Failing Holemaster 3000-CF drill rig Rated capacity: 3700 ft. depth w/3-1/2” drill pipe. Mast: Cold drawn street tubing, elec. welded, 3-sect. w/3-way taper on top sect. Hydraulically raised & lowered. Wired for elec. lights. Equipped w/retracting channel swivel guides for reverse circulation swivel. Equipped w/ladder, climber’s safety device. Hgt. 72” telescoping, width 86” center to center of mast legs, Depth 48” center to center of mast legs, Capacity total gross 133,000 lbs. hook load 100,000 lbs. Racking board capacity 3,000 ft. of 3-1/2” drill pipe, may be mounted to pull 30' ft. or 40' ft. joints, Crown block….. 6 trip line sheaves, 6 kelly line sheaves & single sand line sheaf. Draw works : Drum barrel dia. & length (trip drum 10” x 13”) (kelly drum 8” x 17”) Maximum single line pull first wrap (trip drum 16,600 lbs. w/6 line block) (kelly drum 16,600 lbs. 3/4” x 525’) Line dia. & capacity (trip drum 3/4” x 525’ ft) (kelly drum 16,600 lbs. 3/4” x 525’ ft) brakes, Mechanical lugh-leverage type, double self-energized & equalized (Trip drum 27” x 7”) (Kelly drum 24” x 7”). Auxiliary brake: 15” double rotor parkers none Parkersburg. Catheads, 2, mounted each end of kelly drum shaft. One special air actuated for spinning or breakout, mounted on driller”s side. One foster automatic cathead mounted on opposite side.
Rotary table : Fully enclosed, oil bath type. Spiral bevel gears, ground & lapped in matched sets. Opening 18” through table for setting casing. Hinges up to allow setting casing up to 34” O.D. Rotary table, drum & sand reel, 5 forward & 1 reverse. Air compressors : for control air….1 or 2 Wabco model 2 AVC mounted on compound case. For developing wells, ect….model 253-S2 or 50 SDS or equivalent may be installed on the gooseneck. Engines : 2, each providing 100 continuous BHP, through 17 1/2" fluid couplings, GM diesel 4031-C is standard; other makes w/suitable specs. may be installed. Compound case : Engines may be compounded or used singly. Oil spray bath, three shaft, w/jaw clutch. Transmission : 5 speeds forward….7.20:1, 3.90: 1:2, 12:1:1, 18:1:1, 00:1. 1 speed reverse….7.09:1. Clutches : Hoisting drum….2 Fawick 18CB500 air clutches; 18”. Kelly drum…. 2 Fawick 21.5E475 air clutches; 21 1/2”. Rotary table….twin disc CL-211 air actuated clutch. Master clutch….lipe-roll way 14”; 2 plate.
Engines : Twin disc 11”; 2 plate. Air compressor….twin disc 11”; 3-plate. Controls : Located on side at left of drawworks. Air valve control panel; Remote transmission shifter; throttle; trip & Kelly brakes; hydraulic control & pressure gauge; instrument panel for engines; weight indicator & driller’s platform. Main generator-60KW, 54KW prime, caterpillar model XQ60P2 model 2002. Blowout prevention & well control equipment-8” 3M Regan “Torus” angular preventer 2” 5M Demco valve on side outlet spool, 2” 5M manifold w/adjustable chokes. Doghouse/toolhouse-8” x 36” trailer mounted. Substructure-4” w/pony sub.
Back-up mud pump-Ideco 6” x 12” with 325 HP diesel engine. 135 Drill pipe-4,500’ ft length x 4-1/2". Drill collars-150’ ft L x 6”. Survey machine-Mathey wireline unit 12,000’ ft with .092 line. Location : Africa Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed.
Caterpillar 140H VHP Motor Grader for Mining Used 2007 Caterpillar Motor Grader for Sale Year : 2007 Manufacturer : Caterpillar Model : 140H VHP Condition : Used Description Erops/Air, HYD S/S w/Tip Cntrl, aux hyd w/2007 Rome slope blade (will sell slope separately), video. Hours : 4,934 Location : USA Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed.
------------------------------------------------------------------------------------------------------------------------- Search words(for official use only) - Caterpillar 140H VHP Motor Grader for Mining Used Motor Grader for Mining Caterpillar Motor Grader for Sale in USA 2007 Caterpillar Used Motor Grader for Mining Mining Equipment - Caterpillar 140H VHP Motor Grader --------------------------------------------------------------------------------------------------------------------------------
UMD 110 Land Drilling Rig - For Sale in Europe New Semi Mobile Drilling Rig For Sale - UMD 110 Main Technical Specifications Engine type : C 13 ACERT Nominal engine power hp (kW) : 415 (309) Transmission : Allison 4500 OFS Nominal hoisting capacity metric ton (lbs) : 110 (242000) Workover depht (m) drill pipe (2 7/8”) : 4500 Drilling depht (m) (4 1/2“) : 1500 Rope diameter (mm) : 26 Mast height (m) : 32 Drilling floor height (m) : 5 Travelling system : 4x3 Working pressure (mpa) : 0, 65-0, 8 Technical Specifications Drawworks Main Drum - Input power (hp) : 450 Barrel size : D18” W38” Brake rim size : D44” W12” Wire line size : 1 ” (26 mm) Drum speed : 6F/1R Brake cooling : Water circulation Brake system : Band / disc / auxiliary (Parmac SSR-28 hydro-brake) Lubrication : Automatic or manual Drum clutch : Air flex type Chain drives : All chains are fully encloded for oil bath lubrication ensuring longer life and cleaner operation Sand Line Drum - Barrel size : D13” W37“ Brake rim size : D44” W9½” Spooling capacity : 16114’ Sand line wire size : 9/16” (14 mm) - 5/8” (16 mm) Rig Power & Transmission Diesel engine(s) : Caterpillar C-13 ACERT, 415Hp, 2.100rpm Transmission(s) : Allison OFS 4500 series with torque converter Right angle gear box : Min 500 HP gear box in oil bath gear case Compound box : Twin engine drive through transmission includes disconnect clutches at compound shaft for engines Mast & Crown Block Mast - Mast complete set : Design and conform to API 4F specification Mast height : 32m ( 118ft ) Max. static hook load capacity : 1.100kN ( 250.000lbs ) Racking capacity : 1.500m ( 4 ½’’ DP, 19.2m double ) Height of the monkey board : 17.2m ( from floor ) Accessories : Standpipe , exproof lightning....etc Mast type : Hydraulic telescopic Crown Block - Crown block complete set : Design and conform to API 4F specification Max. hook load : 1.100kN (250.000lbs ) Number of sheaves : (2) Main + (1) fast line + (1) deadline + (1) sandline + (2) sheaves for service winch Sheaves OD : Fast Lines Ø32" ( Ø813mm ) Dead Line Ø28" ( Ø711mm ) Sand Line Ø28" ( Ø711mm ) Dia. of sheave’s grove : Fast & Dead Lines Ø1" ( Ø26mm ) Sand & Winch Lines Ø 5/8" ( Ø16mm ) Traveling Block & Hook Traveling block : 1.100kN Max. statik load, 3 sheaves, Ø32’’ sheaves dia. Ø1’’ (Ø26mm ) groove dia. Hook : 1.100kN Max. statik load, 3tons spring stroke. Elevator link(s) : 1.100kN rated load capacity. Swivel Static hook load, ton : 110 Working pressure, psi : 5,000 Maximum speed, rpm : 300 Coupling thread to stem : 4-1/2" Reg LH Coupling thread to kelly : 6-5/8" Reg LH Stem I.D. : 2-1/2" Trailer & Other Systems Trailer : Three axles semi mobile trailer, 12 wheels, fabricated high tensile steel vehicle frame reinforced at points of greatest stress. Highway equipment and cab included. Installed fuel tank. Tool box. Auxilary drill line drum, all axles dressed brake, folding walkwayss on both sides of trailer. Hydraulic jacks : Four hydraulic operated leveling jacks Hydraulic service winch : 5 metric tons drum pull capacity Deadline anchor : Deadline anchor attached directly to trailer frame Air system : Compressor (engine drive), air tank, relief valves, air dryer, gauges, all clutches Hydraulic system : Hydraulic pump, system operate hydraulic cylinders on mast, hydraulic jacks, hydraulic pipe tong, and hyraulic winch. Control valves, hydraulic oil tank, filters, pipes, hydraulic and air valve connections, fittings. Electrical lighting system : All the electrical equipments on the mast, and substructure are ex-proof type Instrumentation : Driller control panel, weight indicator, gauges, air valves, cables , hoses, fittings, transducers, paint Price & terms : Please enquire using the email form below. If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you. We can arrange delivery of equipment and towage of rigs and vessels where needed. The details mentioned above are believed to be accurate but are not guaranteed. -------------------------------------------------------------------------------------------------------------------------------------- Search words(for official use only) : UMD 110 Drilling Rig For Sale in Europe New UMD 110 Semi Mobile Drilling Rig For Sale New Semi Mobile Drilling Rigs Land Drilling Rigs For Sale New Land Drilling Rig --------------------------------------------------------------------------------------------------------------------------------
Motor Yacht Over 41m for Sale 2008 built Modern Motor Yacht for sale Motor Yacht for Sale - 2008 built
Description She was successfully launched in 2008 before being transferred to the owner. The core hull was built out of kevlar / carbon. The motor yacht main superstructure is fabricated extensively using composite. She has a beam of 8 m / 26.24 ft and has fairly large interior.
A shallow draught of 1.3m (4.27ft) selects the list of overall harbours she can enter, contingent on their individual depth at low tide.
Powered by triple MTU diesel engines, this unit is able to reach a high speed of 53 knots and is propelled by tripple water jets.
She also has an efficient range of 500 nautical miles when underway at her cruise speed of 46 knots. Her total HP is 7200 HP and her total Kilowatts are 5370.
General Class society used: - Completed survey under Maritime & Coastguard Agency (MCA) Length Overall: 41.6 metres / 136.48 feet Gross Tonnes: - Nett Tonnes: - Displacement: 131 - Hull / Superstructure Construction Material : kevlar / carbon / composite
Her Engine(s) is three 2400 Horse Power / 1790 kW MTU. Engine Model: 16V 2000 M93 diesel. Fuel Capacity: 19000 L. Fresh water: 5000.00. Yacht Beam: 8m/26.24ft. Draught Maximum: 1.3m/4.27ft.
Accommodation The large luxury yacht motor yacht is able to sleep a total of 8 guests and 10 crew members.
Price & terms : Please enquire using the email form below If you cannot find the vessel, crane, rig or equipment that you need, please send us an email to mail@worldoils.com stating your requirements and we shall find it for you.
The details mentioned above are believed to be accurate but are not guaranteed. --------------------------------------------------------------------------------------------------------------------- Search words (for official use only) : Modern Motor Yacht for Sale Motor Yacht for Sale - 2008 built Motor Yacht - 2008 built 2008 built Yacht for Sale - over 41m long Over 41m Motor Yacht for Sale 2008 built Modern Motor Yacht for sale Over 41m Modern Motor Yacht Motor Yacht - over 41m - for Sale ---------------------------------------------------------------------------------------------------------------------
Subsea BOP for Sale 10000 PSI Subsea BOP For sale 10K PSI BOP for sale The specs of this BOP will be given by the owners to the potential buyers.
------------------------------------------------------------------------------------------------------------------- Search words(for official use only) : Sub-sea BOP for sale 10k PSI Sub-sea BOP 10k PSI Subsea BOP for sale Used 10k subsea BOP for Sale 10000psi Subsea BOP For Sale -------------------------------------------------------------------------------------------------------------------
Klemm 702-2 Micropile Crawler Drill for Sale 2009 Built Micropile Crawler Drill for Sale
Model : 702-2 Micropile Crawler Drill Manufacturer : Klemm Year : 2009 Condition : Used
2009 Klemm 702-2 Micropile Crawler Drill Limited access micropile drill This is a very nice compact drill capable of installing high-capacity micropiles in very limited access settings The Unit starts and runs, all functions working Has a detachable power pack Deutz TCD 2012 L04 2V 4 Cylinder 127 hp 4.038 L Diesel Engine 2370 mm Mast Can work in very low headroom areas while still delivering power enough to go 100’ ft+ in depth with up to 9″ piles Power pack is umbilical, so drill can work inside, while the power is supplied out away from the operation This machine also has a water Injection System, and 8 in Double Grouser Tracks Meter reads : 6,502+ Hours
--------------------------------------------------------------------------------------------------------- Search words (for official use only) : Used Klemm 702-2 Micropile Crawler Drill for Sale Klemm 702-2 Micropile Crawler Drill - 2009 Built for Sale 702-2 Micropile Crawler Drill for Sale Klemm 702-2 Micropile Crawler Used Drill for Sale Klemm 702-2 Micropile Crawler Drill for Sale in USA -------------------------------------------------------------------------------------------------------
Showing 337 to 384 of 2135 results
.png)
.png)
.png)
.png)
.jpg)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
Search Here
1630320744132.jpg "OSV - 2000 Built - For Sale")
1630320744132.jpg "OSV - 2000 Built - For Sale")
1628506795688.jpg "1966 Built 18,000 LPG Propane Tank - For Sale")
1628506795688.jpg "1966 Built 18,000 LPG Propane Tank - For Sale")
11346757276642.jpg "Ingersoll-Rand T3 (Truckn 3) Drill Rig - 1975 built - for Sale")
11346757276642.jpg "Ingersoll-Rand T3 (Truckn 3) Drill Rig - 1975 built - for Sale")
1630925336170.jpg "Offshore Supply Vessel - 1997 Built - For Sale")
1630925336170.jpg "Offshore Supply Vessel - 1997 Built - For Sale")
1629202769573.jpg "1947 Built 30,000 LPG Propane Tank - For Sale")
1629202769573.jpg "1947 Built 30,000 LPG Propane Tank - For Sale")
11425984414811.jpg "7.5MW Power Plant (Caterpillar) 16CM32 HFP 50Hz for Sale")
11425984414811.jpg "7.5MW Power Plant (Caterpillar) 16CM32 HFP 50Hz for Sale")
