Search Search Here

Browse equipments
No relevant equipments are found in our database.
Search again
Search results
Index No. Status Equipment Name Details

Featured equipments for sale

Crew Boat - 52m - for Sale
Floating Crane for Sale
Ingersoll-Rand T4W DH used drill rig 1988 Built- For Sale
Worldoils Marketplace
Ingersoll-Rand T4W DH used drill rig 1988 Built- For Sale
Worldrigs ID: 842
Ingersoll-Rand T4W DH used drill rig 1988 Built- For Sale

Ingersoll-Rand T4W DH Drilling Rig for Sale
Used Drilling Rig for sale 1988 Built
Drilling Rig - Ingersoll-Rand T4W DH

Model : T4W DH drill rig
Manufacturer : Ingersoll-Rand
Year : 1988
Condition : As-IS

Description : 

1988 Ingersoll-Rand T4W DH drill rig
S/N : 2837
Cummins 855 Diesel Deck Engine (would have to be removed if air compressor installed)
No Air Compressor on Board (Can be installed at an extra cost with 
900/350 or 1050/350 or 1250/350)
Set up to connect a portable air compressor or mud pump for drilling
No Hammer Lubricator or Water Injection Pump (can be installed at an extra cost)
70,000 lbs of Pullback
5,812 Hours
7 Rod Carousel
Mounted on a CCC (Crane Carrier Company) Truck
Diesel Engine
VIN : 1CYDCM284JT0366646
57,064 miles & 4,210 Hours on Truck

Note : Can be sold "As Is" or Retrofitted with deck engine, air compressor, etc. installed

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

Water Well Rigs          Water Well Rigs

----------------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Ingersoll-Rand T4W DH Drilling Rig for Sale
Used Drilling Rig - Ingersoll-Rand T4W DH
Drilling Rig - Ingersoll-Rand T4W DH- For Sale in USA
1988 Built Ingersoll-Rand T4W DH Drill Rig
Land Drilling Rig - Ingersoll-Rand T4W DH
Ingersoll-Rand T4W DH 1988 Built Drill Rig for Sale
-------------------------------------------------------------------------------------------------------------------------
Ingersoll-Rand T4W DH used drill rig 1988 Built- For Sale
Over 85M Flat Top Deck Cargo Barge for Sale
Worldoils Marketplace
Over 85M Flat Top Deck Cargo Barge for Sale
Worldrigs ID: 2084
Over 85M Flat Top Deck Cargo Barge for Sale
280ft Flat Top Deck Cargo Barge for Sale
Over 85M Flat Top Deck Cargo Barge for Sale
Used 2005 built Flat Top Deck Cargo Barge for Sale


General

Year Built : 2005
Class / classification : Bureau Veritas
GRT / NRT : 3,320 t / 996 t

Specifications

Length Overall : 280 ft (85.34 m)
Breadth : 90 ft (27.43 m)
Depth Loaded 1: 8 ft (5.50 m)
Draft Loaded : 14.5 ft (4.39 m)
Dead Weight : 7,800 t (approx.)
Deck Loading : 15 t / m2
Tranverse Bulkhead : Eight (8)
Longitudinal Bulkhead : Two (2)

Deck Equipment

Anchor Winch : 1 x hand operated emergency anchor winch
Anchor : 1 x 2,000 kg stockless bower anchor
Smit Brackets : 4 x smit towing brackets - P&S, fwd and aft
Stanchions : 26 stanchions on each side
Navigation Lights : 1 set solar type, P&S at fwd and aft
Mooring Bollards : 4 sets double mooring bollards each side (deck)

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


------------------------------------------------------------------------------------------
Search words (for official use only) :
280FT Flat Top Deck Cargo Barge
Over 85M Flat Top Deck Cargo Barge for Sale
280ft Flat Top Deck Cargo Barge for Sale
Used 2005 built Flat Top Deck Cargo Barge for Sale
2005 built Flat Top Deck Cargo Barge for Sale
Used Flat Top Deck Cargo Barge
85M Flat Top Deck Cargo Barge - For Sale

------------------------------------------------------------------------------------------
Over 85M Flat Top Deck Cargo Barge for Sale
4 new Heli-transportable AC electric rig for sale
Worldoils Marketplace
4 new Heli-transportable AC electric rig for sale
Worldrigs ID: 2170
4 new Heli-transportable AC electric rig for sale
4 New Heli-Transportable AC Electric Rig for sale
1500hp Heli Drilling Rigs for sale


Description

Model of drilling rig: HH- ZJ40DBS Helicopter transportable rig with 3000 Kg
loads, drilling depth capacity 12000 ft (4.000 m).

Mast

Model: JJ320/45-KH
Effective height of mast: 146 ft (44,5 m)
Static hook load capacity: 716.800 lbs (3.200kN)

Crown Block

Model TC320
No. of pulleys: 6 with perforating cable of 1.1/4” (5x50” and 1x60")

Monkey Board

Able to work with DP 5” Range II, with fall protection safety harness
sytem, escape line (Geronimo) and Ingersoll Rand man rider winch.

Substructure

Max. Capacity of Rotary Table beam: (320 ton)
Setback load (Range II, 5” drill pipe): (3200 kN)
Height of drill floor: 7,5 m (25 ft)
Prepared to receive Walker System removable by Pins, moveable in two
axis “X” and “Y”.

Rotary Table

Pin Drive type, manufactured by Hong Hua, with opening diameter of 27-1/2"
(698.5 mm), maximum rotary speed of 220 RPM and maximum static load of
1.000.000 lbs (4500kN).

Drawworks

Disk Brake type, actuated by 2 electric motors with minimum 870 HP each
and Bit Feeder system (with proximity switch for the crown Block and Rotary
Table). Emergency Shutdown installed in the Doghouse. 640 m (2,100 ft) Drill
Line 32 mm (1-1/4”) 6×19S IWRC EIPS/RRL. Cat Head Model YM-16, manufactured
by Hong Hua.

Travelling Block

Model YC315, manufactured by Hong Hua, with 6 Sheaves and maximum static load
with 6 Sheaves and maximum static load capacity of (3500kN) (790,000 lb).

Hook

Model DG315, manufactured by Hong Hua, built to specification API Spec 8C, with
maximum static load capacity of 790,000 lb (3.500 kN)

Rig Floor Tools

Inside BOP’s 3 ½ IF –  4 ½ IF, DP Elevator 3 ½” –  5”, pneumatic pipe spinner
casing, manual slips. DP. 3 ½” –  5”, automatic DP. Slips,
Casing: Spiders, side door, elevators, aux. elevators, slips, HFD. C56. Tong DP.
Mud saver.

Gensets

8 sets of Caterpillar Generator Model C-15 ATAAC, 455kW / 60Hz / 480V, with sound
proof enclosures.

Auxiliar Generators

2 sets of Cooltech Generator Model KJ200E, rated 200 KVA(160 KW).

Swivel

Model SL450, manufactured by Hong Hua, with maximum static load of 1,000,000 lbs
(4500 kN), maximum dynamic load (API Bearing Load) of 630,000 lbs (2800 kN) and
maximum rotary speed of 300 RPM.

Kelly Spinner

Model A6C-2 made by International, with maximum torque of 1,800 ft.pounds and
maximum speed 150rpm.

Iron Roughneck

Model ST80C, manufactured by National Oilwell Varco (NOV) with Tubular OD Range
of 4-1/4" to 8-1/2" (108-216 mm) and Drill Pipe range of 3-1/2" to 5-1/2"
(89-140 mm).

Tongs

- Drill Pipe Tongs type C, Model 060-273/48, with jaws from 2-7/8" to 5".
- Drill Pipe Tongs type DB, Model Q89-423/90, with jaws from 5" to 9-1/2"
- Casing Tongs type B, Model Q86-324/75 (from 3-3/8" to 12-3/4") and Model
Q340-915/35 (from 13-3/8" to 20').
- Hydraulic Drill Pipe Power Tong made by ECKEL model 8- 5/8 Hydra-Shift HT
(with Hydraulic Backup).

Blowout Preventers

Three set of 13-5/8" 5,000 psi Type U, Single Ram BOP, Cameron style, with
Pipe Rams 2-3/8", 2-7/8", 3-1/2", 5", 7", and 9-5/8".
One set of 13-5/8" 5,000 psi Annular BOP, Shaffer style, with lower clamp
connection, manufactured by Rongsheng.

BOP Accumulator

Model FKQ960-8, with 3000Psi (21Mpa)
Working Pressure, 17 bottles with a total of 969
l capacity and Remote Panel on Rig Floor.

Choke Manifold

Choke manifold 3-1/8” x 5,000 psi with two manual adjustable chokes Cameron
3-1/8” x 5,000 psi and hydraulic choke Cameron 3-1/8” x 5,000 psi,
manufactured by King Dream.

Mud Pumps

Qty: 3 sets heli-transportation Type: Triplex single-acting piston type.
Max. diameter of liner x stroke: 6.1/2” x 9” Max. strokes: 150 spm
Rated Power: 596 KW (800 HP) Max. working pressure: 34,5 MPa (5000 PSI)

Shale Shaker

Qty: 3 sets
Model: Miswaco Meerkat PT Dual Motion
Balanced Elliptical Motion Basic Fluid Capacity: 500 gpm (1.893 L/min)
G-force linear motion up to 6,9 G’s
G-force elliptical motion reduces (5,7G’s maximum)

Mud Cleaner

Model: Miswaco 212/6T4 Meerkat Pt. Desander hydrocyclones: 2 x 10”. Desilter
hydrocyclones: 16 x 4” Degasser
M-I SWACO Compact D-Gasser, capable of removing entrained gas (including H2S
and corrosive oxygen) from drilling fluid, equipped with Mission Magnum Degasser
Feed Pump Model 8x6x14.
Vertical Degasser with Working Pressure of 102 psi (0.7MPa) and diameter of
fluid inlet pipe 102 mm.

Decanter Centrifuge

M-I SWACO Decanting Centrifuge Model 518, stainless steel rotating assembly,
equipped with M-I SWACO Type II Progressive Cavity Centrifuge Feed Pump with rated
capacity of 22 gallons/100 revolutions @ 0 psi (82 liters/100 revolutions).

Mud Tanks

13 sets, each made of steel with cover. Total volume 190 m3 (1,200 bbl), equipped
with single compartment Sand Trap tank, 50 bbls Slug Pit and 50 bbls Trip Tank.

Cargo Handling System

Two MAEDA model LC1385-8B 6,000 kg capacity rating Telescoping Crawler Crane with
Blade Attachment and Quick Disconnect and Two Tadano Mantis 3612, 16,000 kg
capacity Telescopic Crawler Crane.

Drilling Intrumentation

Siemens Mud Pits volume sensors M/D Totco Drilling instr.: WOB Indicator,
Connection Torque Indicator, Tongs Torque Gauge, Mud Pump indicators, Bit Tracking
System, Ton-Mile register, etc.
Hong Hua Digital Drilling Recorder
NOV Deviation Survey Double Recorder
Honeywell Gas detection system

Miscellaneous

Diesel fuel reserve of 30 m3 (190 bbl).
Water treatment System for filtering, purification, chlorination and pH control
for daily water consumption for the camps.

Drill String and Accessories

4,300m of 5" Drill Pipe, 19.5 lb/ft, S-135, NC50.
2,000m of 3-1/2" Drill Pipe, 13.3 lb/ft, S-135, NC50. Plus:
− 50 5" HWDP Length 31 ft, Tool Joint OD 6-5/8" x ID 3", NC50.
− 50 3-1/2" HWDP Length 31 ft, Tool Joint OD 4-3/4" x ID 2-1/4", NC50.
− 6 9-1/2" Spiral Drill Collar, Length 31  ft, ID 3", 7-5/8" REG. 
− 30 8" Spiral Drill Collar, Length 31 ft,  ID 3", 6-5/8" REG.
− 20 6-1/2" Spiral Drill Collar, Length  31 ft, ID 3", NC46.
− 24 4-3/4" Spiral Drill Collar, Length  31 ft, ID 2", NC38.
− 12 3-1/2" Slick Drill Collar, Length 31  ft, ID 1-1/2", NC26.
Lifting Subs,  Crossovers, Tools, etc.

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


-----------------------------------------------------------------------------
Search words(for official use only) :
4 New Heli-Transportable AC Electric Rig for sale
1500hp Heli Drilling Rigs for sale
Heli-Transportable AC Electric Rig - 1500hp - For Sale
New Heli Rigs for sale
Heli Drilling Rigs for sale

---------------------------------------------------------------------------------
4 new Heli-transportable AC electric rig for sale
Tension Machines for Cable / Wire / Rope - For Rent
Worldoils Marketplace
Tension Machines for Cable / Wire / Rope - For Rent
Worldrigs ID: 3047
Tension Machines for Cable / Wire / Rope - For Rent
Tension Machines for Cable / Wire / Rope for Rent
Tension Machines for Cable for Rent


Description :


Cable drum tensioner provide up to 15 Ton back tension also with
constant tension function.

Specifications 15 T drum tensioner :

Back tension : 1 – 15 Ton
Max line speed : 10 m/min
Drum diameter : 3 meter
Dimensions Wx Lx H : 2.2m x 3.7m x 3.95m
Weight : 12 Ton

Track tensioners provide up to 150 Ton back tension for installation or
recovery of flexibles cables, umbilicals and steel pipe products.

Tracks fitted with V shaped pads operate by gripping the product
between the opposing track carriages with failsafe hydraulic cylinders.

Specifications 150 T track tensioner :

Back tension : 15 – 150 Ton
Max line speed : 0-500 m/hr
Track contact length : 5.5 meter
Nominal squeeze/m : 1500 Ton (4 x 375 Ton)
Dimensions W x L x H : 4.5m x 8.5m x 5.1m
Weight : 98 Ton

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
15 Ton Drum Tensioner for Rent
150 Ton 4-track Tensioner for Rent
150 T track Tensioner for Rent
Tension Machines for Wire for Rent
12 Ton Weight Drum Tensioner for Rent

-------------------------------------------------------------------------------------------------------
Tension Machines for Cable / Wire / Rope - For Rent
Max Ice Class DP2 10 Streamer Seismic Vessel - New Building For Sale
Worldoils Marketplace
Max Ice Class DP2 10 Streamer Seismic Vessel - New Building For Sale
Worldrigs ID: 440
Max Ice Class DP2 10 Streamer Seismic Vessel - New Building For Sale

Max Ice Class DP2 10 Streamer Seismic Vessel For Sale
Ultra-modern, High Ice Class, 10 Streamer 3D/4D Seismic Vessel

This vessel is an ultra-modern, high ice class, 10 streamer 3D/4D seismic vessel.
The unique Wártsila design contains the latest of maritime systems along with the
most advanced seismic technology commercially available.
The vessel is the most environment friendly seismic vessels in the
market (DNV CLEAN DESIGN) extreme low fuel consumption provide a range
of not less than 20000nm at 17knots.

Subject to prior sale

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

------------------------------------------------------------------------------------------------------------------------------------------
Searched words(for official use only) -
Winterized New Design 3D/4D Seismic Offshore Vessel
Offshore Seismic Research Vessel For Sale
Latest Design Ultra Modern Offshore Seismic Research Vessel
10 Streamer Latest Technology Ice Class DPII Seismic Vessel
3D/4D Seismic Research Vessel For Sale
High Ice Class 4D Seismic Survey Vessel For Sale
Seismic Research Vessel For Sale
Seismic Vessel for sale
Newest Design DP2 Seismic Vessel with 4D
DPII Max Ice Class 3D/4D Seismic Vessel of Latest design For Sale
10 Streamer 3D/4D Seismic Research Vessel For sale
-----------------------------------------------------------------------------------------------------------------------------------------------------
Max Ice Class DP2 10 Streamer Seismic Vessel - New Building For Sale
International Models - Scale Models of Yachts
Schramm T64HB Drilling Rig
Worldoils Marketplace
Schramm T64HB Drilling Rig
Worldrigs ID: 812
Schramm T64HB Drilling Rig

Schramm T64HB Drilling Rig for sale
1978 built Drilling Rig for sale
Schramm T64HB - Drilling Rig for sale - 1978 Built
Used Drilling Rig for sale

Model : T64HB
Manufacturer : Schramm
Year : 1978
Condition : used

Description : 

1978 Schramm T64HB drill rig
Detroit 8V71 Diesel Deck Engine
425 cfm / 250 psi Air Compressor
Water Injection Pump
Hammer Lubricator
200' ft of Drill Pipe (20' x 4-1/2") and basic tooling included
6" & 8" Hammers & Bits included
Lincoln 225 G7 Welder & Generator on board
Super Rapid Head Travel (loading pipe)
Mounted on a GMC truck
6V53 Diesel Engine
13 Speed Transmission
Flotation Tires (Front), Newer Front Brakes, Newer Transmission
Location : USA

Price & terms : Please enquire using the email form below.      

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

Water Well Rigs          Water Well Rigs

---------------------------------------------------------------------------------------------------------
Search words(for official use only) :
Schramm T64HB Drilling Rig for Sale
Drilling Rig - Schramm T64HB - For Sale
1978 built Drilling Rig for sale
Used Drilling Rig - 1978 built Schramm T64HB
Land Drilling Rig For Sale - 1978 built
Used Schramm T64HB drilling rig for Sale
-------------------------------------------------------------------------------------

 
Schramm T64HB Drilling Rig
Driltech D40K Used Drill Rig for sale
Deck Crane for Sale
Worldoils Marketplace
Deck Crane for Sale
Worldrigs ID: 2421
Deck Crane for Sale

Deck Crane for Sale


Description :


Technical Data

General :
Type of crane : L403 2/3033.5-2

Weight : 66 ton
Type of current : 3 - 60Hz
Supply voltage : 440V
Control voltage : 100V

Mechanical Data :

Jib radius ( At SWL  = 40 tons) : max. 32.0m
Jib radius ( At SWL  = 30 tons) : max. 33.5m
Jib radius : min. 2.4m
Lifting height H : 7.845m
Lifting height K : 27.155m

Hoisting capacity at jib radius 32m : max. 40 ton
Hoisting capacity at jib radius 33.5m : max. 30 ton
Hoisting speed at 0 -40/30 ton : 0 - 20 m/min.
Hoisting speed at 0 - 16 ton : 0 - 40 m/min.
Luffing time from max. to min. jib radius : 65 sec.
Slewing speed : max. 0.6 rev/min.

Wire rope, hoisting winch : ø 34 mm x 291.0m
                                              No. 388 8065-805
Wire rope, hoisting winch : ø 28 mm x 116.5m
                                               No. 388 3261-810
Wire rope, stabilizing winch : ø mm m
                                                  No.
Sling, stabilizng winch : No.

Cable for cable winchs : No.

Cable load-relieving : No.

Socket plug : No.

Clamp : No.

Electrical Data :

Main motor
Type of current : 3-60 Hz
Rated power, cont. : 185 kw
Rated power, 40% int. : 295 rev./min.
Speed : 1785 rev./min.
Rated voltage : 440 v
Starting current : 640 A

Gear box data :
Gear box type : 388 3140-801
Gear ratio : i = 0.683
Speed : rev/min

Hydraulic data :

Hoisting winch circuit : 187 5241-801
Pump type : 2 x 119 cm3
Hydraulic motor type : 078 0040-803
Flow rate, per rev. theoretical : 33780 cm3/rev.

Luffing winch circuit :
Pump type : 187 5241-802
Displacement : 2 x 119 cm3
Hydrualic motor type : 178 1322-801
Flow rate, per rev. theoretical : 16300 cm3/rev.

Slewing circuit :
Pump type : 187 5241-802
Displacement : 119 cm3
Hydraulic motor type : 388 3127-801
Flow rate, per rev. theoretical : 59.8 cm3/rev.

Feed and control circuit :
Pump type : 388 1669-801
Displacement : 49.1cm3
Feed pump motor
Type of curent : 3-60 Hz
Rated power 2 poles : 20 kw
Rated power 4 poles : 13 kw
Speed 2 poles : 3360 r/min
Speed 4 poles : 1680 r/min
Starting current 2 poles : 141A
Starting current 4 poles : 107A

Oil tank
Oil volume; Oil filling : 650 litres


Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------
Search words (for official use only) :
Deck Crane for Sale
Used Deck Crane for Sale
66 Ton Deck Crane 
-------------------------------------------------------------------------------------------
Deck Crane for Sale
Winches & Equipment - For Rent
Davey Rotary Table Drilling Rig - For Sale
Deck Barge for Sale
Worldoils Marketplace
Deck Barge for Sale
Worldrigs ID: 2051
Deck Barge for Sale
Deck Barge for Sale
DNV Classed 300 x 90 Deck Barges

Description :

Barge 1 - 4 are flattop oceangoing heavy deck cargo barges
with the following special features :

Improved hull shape for reduced towing resistance obtaining a
higher towing speed with less fuel consumption.

Diesel-electric power system and automated ballasting and valve
control system with Eltorque electric actuators.

First offshore barges to have built-in ballast water treatment system
(BWTS). The Type-approved Balpure* ballast water treatment system
from Severn Trent De Nora.

Built : 2012
Class : DNV+1A1

Dimensions :

Length overall : 91.440 m (300')
Breadth overall : 27,432 m (90')
Depth : 6,096 m (20')
Draft forward : 1,308 m
Draft aft : 0,894 m
Loaded draft : 4,840 m
Frame spacing : 2286 mm

Arrangement and Form :
Bulkheads :
3 longitudinal
4 transverse
Pumproom bulkhead.

Double bottom : In pumproom
Ballast tanks : 20
Bow : Raked-sloped bottom plate
Stern : Raked-sloped bottom plate and 2 skegs

Capacities :
Deadweight : 9025 tonnes
Lightship weight : 2361 tonnes
Reg. tonnage : 4050 GRT/1215 NRT
Deck area : 2508 m2
Uniform deck load : 25 tonnes per m2

Machinery and Ballasting Equipment :
Generator : Caterpillar 200kw
Ballast pumps : 2 x 600 m3/hour
Tank sounding : Kockum Sonics Levelmaster
Valve actuators : Eltorque QT800/QT250

BWTS :

Capacity : 600 m3/hour

Type-approved BALPURE* ballast water treatment system is a
reliable and economical ballast water treatment approach, which
has been proven to surpass IMO D-2 standards. The system
utilizes electrolytic disinfection technology treatment during
uptake of ballast water.

Towing Arrangement :

DNV certified Smit towing brackets both forward and aft (recessed).
Certified Smit towing bridle consisting of 2 x 3.8m chafing chains,
2 x 17m steel wire ropes, forged Deltaplate and shackles, all with SWL85T.

Emergency Towing Arrangement :

DNV certified Smit towing bracket connected to a 4m chafing chain and
103m steel wire rope with SWL 85T +, stretcher, messenger
line and floating buoy.

Mooring-/Anchor Arrangement :

Emergency anchor : 1 x Spek anchor 4000kg
Anchor wire : 610m dia. 38mm
Windlass : Hydraulic driven in pumproom
Capstan : Hydraulic driven PS forward
Bollards : Recessed mooring bollards NS2584
Fenders :
2 x tiers horizontal steel fenders each side.
1 x tier steel fender each end.

Navigational equipment :
Daylight signals, LED and gas driven navigational lights.

Point Loads :

Longitudinal bulkheads/sideshell and transverse frames:
Longitudinal bulkheads/sideshell and transverse bulkheads:
Mid on transverse frames :
Mid on transverse bulkheads

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------
Search words (for official use only) - 
DNV Classed Deck Barges for Sale
300 x 90 Deck Barge for Sale
4 Deck Barges for Sale
2012 Built
DNV Classed Deck Barges
Deck Barges for Sale

-----------------------------------------------------------------------------------
Deck Barge for Sale
Landing Craft Type RoRo Ship for Sale
Worldoils Marketplace
Landing Craft Type RoRo Ship for Sale
Worldrigs ID: 743
Landing Craft Type RoRo Ship for Sale

Landing Craft Cargo Ship for Sale
LCT Type RoRo Ship for Sale
Rebuilt RoRo LCT Ship for Sale

Built : 1981
Completely rebuilt : July 2004

GRT : 576T
DWT : 1,071T
Class : KST
LOA / LBP : 68.57m / 54.43m
Beam/Depth/Draft : 13.5m / 3.5m / 2.8m

Pax/crew : 13 persons/ 6 persons
Engine : 3 X Mitsubishi DS6R2-MTK2 950ps/1400rpm
Speed : Max. 14kts / Ser. 10~11kts
Fuel cons. : Bunker A / 65L per hour each engine (total 195L per hour)

A/E : 2 X Daewoo AD136T
F.O.T : 30,000 ltrs
F.W.T : 30 tons
Car capa : 54 cars or 5 ton X 22 trucks
Crane : 1 X 10 ton
Cargo hold : 4( 2 in port side / 2 in stb'd side )/ 670cbm capa

Verticle clearance : 4.5M
Last SS : Mar. 2009
LAST DD : June 2010
Navigation equipment : Radar / Gyro compass / GPS / AIS

Subject to prior sale

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------------------------------------------------------------
Search words (for official use only) -  
Landing Craft Cargo Ship for Sale
LCT Type RoRo Ship for Sale
Landing Craft for Sale
Rebuilt 2004 RoRo Ship for Sale
LCT RoRo For sale
LCT Type Cargo Ship for Sale
-------------------------------------------------------------------------------------------------------------------
Landing Craft Type RoRo Ship for Sale
Landing Craft - 300 Ton - for Sale
Self Propelled Oil Barge - 88m - For Sale
Worldoils Marketplace
Self Propelled Oil Barge - 88m - For Sale
Worldrigs ID: 2711
Self Propelled Oil Barge - 88m - For Sale
Self Propelled Oil Barge - 88m - For Sale
Self Propelled Oil Barge - 2012 Built - for Sale

Description :


General

Type of Ship : SPOB (Self Propelled Oil Barge)
Year of Build : 2012
Class : BKI

Particulars

Type of Hull/Bottom : Double Hull Double Bottom
Cargo Tank : Steel
L O A : 88.280 meters
L B P : 83.540 meters
Breadth (moulded) : 15.000 meters
Depth (moulded) : 04.80 meters
Design Draft (moulded) : 04.00 meters
Tropical Max Draft : 04.073 meters (FW)
Tropical Max Draft : 03.974 meters (SW)
Freeboard (Tropical) : 727 mm
Freeboard (Summer) : 810 mm
TPC Immersion : 810 mm
Keel to Mast Head : 24 meters
Air Draft (laden) : 20 meters (14 + 6)
Air Draft (ballast) : 22 meters (16 + 6)
Collapsible Mast :
6 meters (ballast draft 2 m, laden draft 4 m)
G.R.T : 2,177 tonnes
N.R.T : 1,134 tonnes
D.W.T : 3,200 tonnes
Light Weight : 1,123.716 tonnes
Carrying Capacity : 3,100 MT~ 4,148 cbm (98%)
Sludge Tank Capacity : 1.2 cbm (starboard side)
Bildge Tank Capacity : 1.0 cbm (starboard side)

Machinery

Main Engine :
2 units x 750 PS Mitsubishi, Japan (Diesel : S6R2-MPTR)
Propeller : 2 units
Auxiliary Engine : 2 units x 48 kW (60 kVA) Mitsubishi, Japan
Cargo pump : 2 units (capacity 120 MT/hour)
Pump BBM Cons : 50 liters/hour or 1.2kL/day (for 2 pumps)
Cargo Segragation : 2 Grade
Laden Speed : 7 knots
Service rpm : 1,300
Ballast Speed : 7 knots
Max rpm : 1,350

Price & terms : Please enquire using the email form below

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------------
Search words (for official use only) :
Self Propelled Oil Barge for Sale
Used Self Propelled Oil Barge for Sale
2012 Built Self Propelled Oil Barge for Sale
BKI Classed Self Propelled Oil Barge for Sale
88m Self Propelled Oil Barge for Sale

---------------------------------------------------------------------------------------
Self Propelled Oil Barge - 88m - For Sale
Simco 2800 Drilling Rig for Sale
Worldoils Marketplace
Simco 2800 Drilling Rig for Sale
Worldrigs ID: 814
Simco 2800 Drilling Rig for Sale

Simco 2800 Drilling Rig for Sale
Simco 2800 Drilling Rig - 2009 Built - For Sale

Model : 2800
Manufacturer : Simco
Year : 2009
Condition : Used

Description :
2009 Simco 2800 Drill Rig
Note: This is set up as a water well / geothermal drill & If you prefer a 2800 HSHT
set up for geotechnical drilling with auto hammer that is possible,
Rod 3" PDQ style 10 foot length
Ingersoll-Rand 375 CFM / 170 PSI Air Compressor
Centerline Monoplex Mud Pump
Rod box
FMC I0413C Water injection pump
Deutz Diesel Deck Engine (rated 70 HP)
2 Winches
Mounted on a 1994 Chevrolet Kodiak 4x4 truck
Caterpillar 3116 Diesel Engine

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------------------------------------------------------
Search words (for official use only) :
2009 Built Simco 2800 Drilling Rig for Sale
Used Simco 2800 Drilling Rig for Sale
Simco Drilling Rig for Sale in USA
Drilling Rig - Simco 2800 - For Sale
Simco 2800 Used Drilling Rig for Sale in USA
----------------------------------------------------------------------------------------------------------------

 
Simco 2800 Drilling Rig for Sale
Ingersoll-Rand T3W Drill Rig - 1988 built - For Sale
Worldoils Marketplace
Ingersoll-Rand T3W Drill Rig - 1988 built - For Sale
Worldrigs ID: 509
Ingersoll-Rand T3W Drill Rig - 1988 built - For Sale

Ingersoll-Rand T3W Drill Rig for Sale In USA
1988 Built Used Drilling Rig for Sale

Model : T3W Drill Rig
Manufacturer : Ingersoll-Rand
Year : 1988
Condition : Used

Description :

1988 Ingersoll-Rand T3W Drill Rig - S/N: 2902
IR 825 CFM / 350 PSI Air Compressor
Cummins 855 Diesel Deck Engine
26,500 lbs of pull back
300' ft of used drill pipe (20' x 3-1/2" x 2-3/8"IF) & basic tooling included
Rod Rack
Carousel
Hammer Lubricator
Water Injection Pump
Mounted on a Ford L9000 Truck
Cummins L10 Diesel Engine
8 Speed Transmission
55,000+ miles
Custom Black Paint Job (around 2014)

Location : USA

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-----------------------------------------------------------------------------------------
Search words (for official use only) -
Ingersoll-Rand T3W Drilling Rig for Sale
1988 Built Used Drilling Rig for sale in USA
Used Drilling Rig for sale in USA
1988 Built Land Drilling Rig For Sale
Drilling Rig Ingersoll-Rand T3W for Sale
Oilfield Drilling Rig Ingersoll-Rand T3W
----------------------------------------------------------------------------------------
Ingersoll-Rand T3W Drill Rig - 1988 built - For Sale
Downington Iron Works LPG Tank for Sale
Ideco Rambler Workover Rig for sale
Worldoils Marketplace
Ideco Rambler Workover Rig for sale
Worldrigs ID: 2759
Ideco Rambler Workover Rig for sale
Ideco Rambler Workover Rig for sale
1984 Built Ideco Rambler Rig for Sale


1984 Ideco Rambler Rig, Model BIR-3185 Five Axle Carrier


Specifications

Single Drum H-35 Drawworks with 1” drill line
96’ x 215,000#  Ideco Derrick with rods & tubing racking boards
Detroit Diesel Series 60, 475 HP engine
Traveling Block, Ideco DS110, slotted speed kit design, 2 sheaves, 110 ton

Foundation, iron stands on 3” x 12” timbers
Allison CLT5860 Transmission
Hydromatic Brake, 15” double rotor with water tank
Tong, Gill Model 500 with back up head
Blowout Preventer, Townsend Type 81, 7-1/16” x 5000 psi. double stack
Stripper Head, Hall style 1500 psi.

Tubing Slips, Guiberson 60 ton air operated
Rod Elevators, 5/8” to 1”
Tubing Elevators, 2-3/8” to 2-7/8” EUE
Wash Swivel, King 53GA
Hand Tools

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------
Search words (for official use only) :
Ideco Rambler Workover Rig for sale
1984 Built Ideco Rambler Rig for Sale
BIR-3185 Five Axle Carrier Rig for Sale
Ideco Rambler Rig - Model BIR-3185 - For Sale
Workover Rig - 1984 Built - For Sale
Land Drilling Rig for Sale

-----------------------------------------------------------------
Ideco Rambler Workover Rig for sale
Watson Hopper Corsair 400 Drilling Rig - For Sale
Worldoils Marketplace
Watson Hopper Corsair 400 Drilling Rig - For Sale
Worldrigs ID: 2943
Watson Hopper Corsair 400 Drilling Rig - For Sale
Watson Hopper Corsair 400 Drilling Rig for Sale
Watson Hopper Corsair Drilling Rig - 2011 Built for Sale


Description :


Recently inspected by Watson Hopper, recently replaced drilling
line Rig is complete with hand tools, wrenches, spares, etc.

Tee seal

2005 flow back 130 Bbl pit w/muffler
2006 Townsend 71/16" 5K double gate BOP with rams for 23/8,
27/8, 31/2" tubing, skid mtd. To a Hickman trailer w/4 bottle
accumulator

2005 WW enclosed dog house trailer 8ft x 16ft w/lockers tool
bench & tool storage, electrical panel w/lights & outlets, fully
insulated Near new

National J-250 quintaplex pump w/cat D353, twin disk clutch &
mission 6x5 charge pump

Tools :

Washington stripping head
hammer wrenches (7/8" - 1 7/8")
Extra BOP ram rubbers and 3K step bolts
5K twin choke manifold with 100ft of 2" 5K hard line
6ft elevator bails
8ft elevator bails
two rod BOPs (one manual and one hydraulic) w/spare bag rubbers
3" baash Ross slip bowl & slips w/3" ID elevators
2" 5K flow Tee w/3" lubricator pack off & pump
BJ rod tongs w/jaws for 5/8" - 1 5/16"
Oil Country Rod Elevators 5/8" - 1"
BJ open face tubing tongs w/23/8",27/8" & 3" heads
BJ 27/8 " elevators
BVM 23/8" elevators
Oil Country tubing air slips w/23/8" & 27/8" dies
3/4" & 1" rod wrenches
rod transfers 3/4", 7/8" & 1"
TIW valve 23/8"
TIW valve 27/8"

Other misc.consumables included

Location : USA

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


-------------------------------------------------------------------------------------------------------------------
Search words (for official use only) :
2011 Built Watson Hopper Corsair 400 Drilling Rig for Sale
475 HP Watson Hopper Corsair 400 Drilling Rig for Sale
Watson Hopper Corsair Drilling Rig for Sale in USA
Drilling Rig - Watson Hopper Corsair 400 - For Sale
5 Axle Carrier Watson Hopper Corsair Drilling Rig for Sale

--------------------------------------------------------------------------------------------------------------------
Watson Hopper Corsair 400 Drilling Rig - For Sale
Offshore Support Vessel - 2008 Built for Sale
Landing Craft - 1988 built for Sale
Speedstar 70K Drilling Rig - For Sale
Soilmec SM 401 Rock Drill - For Sale
New Steerprop Thruster Units for Sale
Worldoils Marketplace
New Steerprop Thruster Units for Sale
Worldrigs ID: 1369
New Steerprop Thruster Units for Sale
New
Steerprop Thrusters for Sale
Thrusters Unit for Sale
2011 Built Steerprop Thruster Unit for Sale


Description:

A.
Propulsion Units

Two (2) Steerprop Azimuth Propulsors, SP 35
Rated: A.B.S. Continuous rating 2529 kW at 1040 rpm, each consisting of :
- Power transmission with top and bottom right angle gears, shafts and bearings.
- Dual inputs at 180 degrees
- Large rotary ring integrating slewing bearing and tooth rim for azimuth
- Sturdy housing to contain power train and azimuth elements
- Seal assemblies on azimuth tube and propeller shaft to seal off seawater
- Tank for maintaining the pressure of seal fluid, pressurized tank with regulators and sensors
- Four bladed, fixed pitch type NiAl-bronze propeller
- Steerprop HJ3 high performance nozzle ( with stainless steel inner surface)
- Electric azimuth device with two electric motors, planetary gears and pinions
- Lubrication oil system for circulation, filtering and cooling
- Steering feedback sensor with double transmitters
- Independent mechanical azimuth device with transmitter
- Alarm transducers, to be incorporated to alarm system
- Hull mounting adapter, rectangular or round adapter, depending on engineering, with a
flange for bolt-in mounting and for upward, "pull-through" dismounting. Bolts and gaskets
- Outer hull well casing with flange for the bolt-in mounting

B. C
ontrols: AC Equipment - Electrical steering system
Four (4) AC-AC motor controllers to position and regulate the azimuth motors
Four (4) AC brake resistors
Two(2) Brake control units

C.
Controls
Bridge forward and bridge aft main steering stations in the wheelhouse, each including:
Two (2) drop-in panels for each steering station
- Speed and direction control levers
- Indicator units for azimuth position and propeller RPM
- Devices for hardwired azimuth and prime mover speed back-up controls (main station only)
- Control station selection devices. DP/manual switch not included

Two (2) steerprop control units in the machinery space, including:
- Programmable logic controller for the main control for azimuth and prime mover RPM
- Control voltage and local control switches
- Independent back-up controls for azimuth and prime mover RPM
- AC/DC converter for 24 V DC control system with auto-switchover to
back-up 24 V DC supply with circuit breakers and filters
- Prime mover speed control with 4-20mA or equal with interlocks
- Control system alarm contacts to be incorporated with alarm system
- Autopilot interface
- DP interface

Two (2) local control at the propulsor:
- Azimuth push-button controls, mechanical indicator for azimuth position

D. Miscellaneous Items
Three (3) sets of instruction and maintenance manuals
Two (2) sets of classification certificates - A.B.S
One (1) set of tools
Ten (10) days of service technician's time for installation inspection, 
start-up and attendance at sea trails

Technical Data
E. Performance
1. Power capacity
Propeller diameter of steerprop SP35 : 2,800 mm
Nozzle type : HJ3-5
Input speed : 1,040 rpm
Throughout power : 2,529 kw
Propeller shaft speed : 239 rpm
Azimuth capacity
Azimuth speed, nominal : 2.0 rpm

2. Dimensions and weights
Stem length : 3,350 mm
Weight of basic steerprop SP35 : 28,000 kg (approximate)
Azimuth propulsor
Weight of the auxiliaries : 1,000 kg (approximate)

3. Interface data
Fluid volumes :
Volume of lubricant : 2,100 liters
Seal fluid : 20 liters
Cooling water - lubrication, t<38C : 250 l/min
(fresh water)

4. Control voltage supply
Control voltage main supply 120 VAC
Control system (90 - 264 V) : 150...240 W

5. Control voltage battery supply 24 V DC
Starting battery is not acceptable for this supply
Control voltage supply : 240 W
Indication system : 10 W
Back-up control : 240 W

Electric Power requirement, 3ph, 480 VAC or equal
Steering gear motor 1 : 22 kw
Steering gear motor 2 : 22 kw
Lubrication/hydraulic pump : 10 kw

Note: Power requirements for steering motors and hydraulic are per steerprop unit.

Steerprop control system does not include circuit breakers and isolation switches for
AC current systems. They are normally located at the vessels switchboard.

Steerprop recommendation is to arrange the power supply redundant. Each 
drive can be supplied from separate switchboards arranged so that if one supply 
goes down another is able to continue.The ship generator should be selected suitable 
for frequency converter type motor controller load. Also other system design should 
take care of frequency converter load.

F. Bow tunnel thruster units fixed pitch propeller, reversing motor

Two (2) Berg propulsion BFTT 419, each including

- Four bladed, fixed pitch type NiAl - bronze propeller dia 1950mm
- One primary input coupling for connection to prime mover
- One tunnel, appx. length 1400mm with stainless steel in way of the propeller
- One static header tank for lubrication
- Classification ABS

G.
Thruster
control system for two (2) Berg fixed pitch Thrusters

The system will control the motor speed and direction by supplying an
analogue demand signal to the motor controller.

The system will consist of two (2) control panels (one forward and one aft) and
two (2) thruster control units.

Each panel will have the following features:
One (1) twin lever control head type Lilaas
Indication for station in control in command
Indication for thruster running
Station tranfer/between fore and aft station
Start button/indication
Stop button/indication
Connection for DP system
ABS classification

Control will consist of follwing elements:
Control transfer logic elements and indication outputs
Stop/start elements
Signal output to the motor controller
Speed signal 4-20mA full port / 12mA full stbd.
Power supply conditioning
DP connection
terminal strip connectors

H. Miscellaneous Items


Three (3) sets of instruction and maintenance manuals
Two (2) sets of classification certificates - A.B.S
One (1) set of tools

Technical Data

I. Performance

1. Power Capacity
Propeller diameter of Berg BTT 419 : 1950 mm
Input speed : 1040 rpm
Throughout power : 846 kw
Calculated thrust per unit : 129 kn

2. Dimensions
Tunnel length : 1400 mm

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

--------------------------------------------------------------------------------------------------------------------------------
Search words(for official use only) :

New Steerprop Thrusters for Sale
2011 Built Steerprop Thrusters for Sale
Indoor storage
Azimuth Thrusters for Sale
4 New Thrusters for Sale
Thruster Unit for Vessels
Unused Thruster Units for Sale
Ship Thruster for Sale
Steerprop Thrusters for Sale in Scandinavia
New Steerprop AzimuthThrusters for Sale

--------------------------------------------------------------------------------------------------------------------------------
New Steerprop Thruster Units for Sale
15K WOM Choke Manifold for sale
CKE2500 Kobelco Crawler Crane for sale
Worldoils Marketplace
CKE2500 Kobelco Crawler Crane for sale
Worldrigs ID: 1501
CKE2500 Kobelco Crawler Crane for sale
CKE2500 Kobelco Crawler Crane
Hydraulic Crawler Crane for sale
250T CKE2500 Kobelco Crawler Crane


Specifications


Main Boom

Max. Lifting Capacity : 250 t/4.0 m
Max. Length : 91.4 m

Fixed Jib

Max. Lifting Capacity : 26.8 t/9.8 m
Max. Combination : 76.2 m + 30.5 m

Luffing Jib

Max. Lifting Capacity : 70 t/9.8 m
Max. Combination : 61.0m + 51.8 m, 51.8 m + 61.0 m
Luffing Angle : 63° ~ 88°

Main & Aux. Winch

Max. Line Speed : 110 m/min (1st layer)
Rated Line Pull : 132 kN (13.5 tf)
Max. Line Pull : 245 kN (25 tf)
Wire Rope : 25 mm
Wire Rope Length : 480 m (Main) 385 m (Aux.)
Brake Type : Wet-type multiple disc brake
Free-Fall : Option

Working Speed

Swing Speed : 2.1 min-1 (rpm)
Travel Speed : 1.1/0.7 km/h

Power Plant

Model : Mitsubishi 6D24-TLU2D
Engine Output : 235 kW/2,000 min-1 (rpm)
Fuel Tank Capacity : 400 liters

Hydraulic System

Main Pumps : 4 variable displacement
Max. Pressure : 30.9 MPa (315 kgf/sq.cm)
Hydraulic Tank Capacity : 550 liters
Self-Erection Device : Standard

Weight

Operating Weight : Approx. 208 t
Counterweight : 80.6 t (Upper), 20.0 t (Lower)
Transport Weight : 44.9 t (Main machine)
Ground Pressure : 95 kPa (0.97 kgf/sq.cm)

We also have used cranes.


Additional information regarding this equipment will be shown on request


Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

-------------------------------------------------------------------------------------------------------
Search words(for official use only - 

CKE2500 Kobelco Crawler Crane for sale

CKE2500 Kobelco Hydraulic Crawler Crane for sale
250 Tons Kobelco Crawler Crane for Sale

Hydraulic Crawler Crane for sale
250T CKE2500 Kobelco Crawler Crane for sale

-----------------------------------------------------------------------------
CKE2500 Kobelco Crawler Crane for sale
Offshore Supply Vessel - For Sale
Worldoils Marketplace
Offshore Supply Vessel - For Sale
Worldrigs ID: 2878
Offshore Supply Vessel - For Sale
240FT Offshore Supply Vessel for Sale
1998 Built OSV for Sale


Descriptions :


General

Vessel Type : Offshore Supply Vessel
Year Built : 1998
Classification : ABS, USCG, SOLAS, MARPOL

Dimensions

Dimensions : 240 ft X 56 ft X 21 ft (73.15 m X 17.07 m X 6.4m)
Draft (Lightship) : 6 ft. 6 in. (1.98 m)
Draft (Loadline) : 18 ft (5.49 m)
Clear Deck : 165 ft x 46 ft (50.29 m x 14.02 m)
Cargo Deck Area : 7,590 sq. ft. (705.13 sq. m)
Deck Cargo Capacity : 1,525 LT (1,549.47 MT)
Deadweight Tonnage : 3,292 LT (3,344.83 MT)

Capacities

Fuel Oil : 311,617 gals. (1,179.6 cu. m)
Ballast : 294,511 gals. (1,114.85 cu. m)
Potable Water : 24,031 gals. (90.97 cu. m)
Dry Bulk : 8,106 cu. ft. @ 80 psi (229.54 cu. m @ 5.5bars)
Liquid Mud : 6,063 barrels (963.94 cu. m)

Machinery

Main Engines : Two (2) 3516 CAT Diesels, 3,200 BHP
Main Propulsion : 3420 HP
Bow Thrusters : One (1) 900 hp Tunnel
Speed : 14.2 knots
Generators : Two (2) x 500 kW
Generators : One (1) x 170  kW emergency

Special Features

Tuggers : Two (2) x 6 Tons
Ship Motion : Two (2) Passive Type Anti-Roll Tanks
Ship Motion : Bilge Keels
Positioning : DP-2
Cranes : One (1) x 15-Ton (13.61 MT) Capacity

Life Saving Equipment

Life Rafts : Two (2) x 20-Man Inflatable Life Rafts
Life Rafts : Two (2) x 25-Man Inflatable Life Rafts
Life Rafts : Two (2) x 10-Man Inflatable Life Rafts
Rescue Boat/Craft : One (1) x 5.8 m Rescue Boat
Other gear as required by authorities

Electronics

Electronic Package :
NAVTEX NCR-300A Receiver
Seacall 7000 MF/HF DSC Controller
SEA 330 HF/SSB
Seawatch MF/HF DSC Watch Receiver
JUE-75C Inmarsat-C
Furuno FELCOM18
Seator 3000 GMDSS
Two (2) Furuno FAR-21x7 Radars
Furuno FE-700 Depth Sounder
Two(2) SEA 7156 VHF FM Radios
Raytheon NAV 398 GPS/LORAN
Two (2) Seacall 7100 VHF DSC Controllers
Necode DSC 1000
Two (2)Sony Multiscan 200 GS Monitors
Navitron Autopilot
Marine Technologies DP System

Accommodation : 29

Price & terms  :  Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


----------------------------------------------------------------------------------------
Search words (for official use only)  :
ABS Class Offshore Supply Vessel for Sale
73.15M OSV for Sale
14.2 Knots Offshore Supply Vessel for Sale
Used OSV - 240ft - for Sale
Offshore Supply Vessel - 1998 Built - For Sale

---------------------------------------------------------------------------------------
Offshore Supply Vessel - For Sale
Pedestal Crane - 40 Ton For Sale
Worldoils Marketplace
Pedestal Crane - 40 Ton For Sale
Worldrigs ID: 755
Pedestal Crane - 40 Ton For Sale
Pedestal Crane for Sale
40 ton Pedestal Crane
40Ton Pedestal Crane For Sale
 
General :
The 40 Ton Crane is a American build pedestal type manufactured by 
National Oilwell Varco. The crane has a max reach of 40.9 metres. 
The safe working load varies from 23 ton at maximum reach to 40 Ton at 7.8 metres. 
The crane is diesel driven by its own diesel engine connected to the hydraulic powerpack. 
 
Specifications :
Type : Pedestal
Model : 35000HD
Year Built : 2009
Main hook lifting capacity : 40T
Aux. hook lifting capacity : 9T
Main hook max. radius : 40.9m
Main hook min. radius : 7.8m
Aux hook min. radius : 8.5m

Main hook max. speed : 14m/min (4 parts, 1st layer)
Aux. hook max. speed : 82m/min (1 part, 1st layer)
Boom hoist wire length/size : 411m/1”
Main hoist wire length/size : 329m/1”
Aux. hoist wire length/size : 137m/1”

Power plant : Diesel/hydraulic
Diesel engine : Caterpillar model 3412 DITTA, 860hp @ 2100rpm
Diesel fuel tank : 350 gallons
Hydraulic oil reservoir : 800 gallons

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.
 

--------------------------------------------------------------------------------------------------------------------
Search words (for official use only) - 
Pedestal Crane for Sale
40Ton Pedestal Crane for Sale
Pedestal Crane for sale - 40 Ton
Pedestal Crane Crane - 2009 built - For sale
2009 built Pedestal Crane
Pedestal Crane - 40 ton - for sale
---------------------------------------------------------------------------------------------------------------------
Pedestal Crane - 40 Ton For Sale
Schramm T130 Drilling Rig - For Sale
Lattice Boom Offshore Crane - 2000T for sale
Hopper GXXTA D/D Back-In Well Service Rig for Sale
Jack Up Rig 300 Foot
Worldoils Marketplace
Jack Up Rig 300 Foot
Worldrigs ID: 706
Jack Up Rig 300 Foot

Jackup Rig for Sale
Used 300Foot Jackup Rig
Jackup Rig For Sale - 1983 built

Please note : Only very basic data is displayed here.
If you  wish to know more, please send us an email to
mail@worldoils.com or use the email form at the bottom
of this page.

General :
Rig Type : Jackup independent legs
Built : 1983
Class : ABS

Dimensions :
Overall length : 72.40m
Overall width : 60.21m

Number of legs : 3
Leg length : 414.54ft
Max. length of legs below hull : 364.00ft

Spud can :
Diameter : 48.00ft
Height : 14ft

Operational Capabilities :
Water depth : Max. 300ft
Drilling depth capability : 20,000ft

Subject to prior sale

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

--------------------------------------------------------------------------------------------------------------------------
Search words(for official use only) - 
Jackup Rig for Sale
300Foot Jack Up Rig
Jackup Rig Brokers
Used Jackup for sale
Jack up Rig Sellers
Used Jackup Rig For Sale - Water depth 300ft
1983 built used Jackup Rig For Sale
300ft Jackup Rig for sale
Jackup Rig For Sale - 1983 built
Jackup Rig Dealers
---------------------------------------------------------------------------------------------------------------------
Jack Up Rig 300 Foot
Anchor Handling Tug 45m for Sale
Worldoils Marketplace
Anchor Handling Tug 45m for Sale
Worldrigs ID: 2261
Anchor Handling Tug 45m for Sale

Anchor Handling Tug for Sale
2011 Built Anchor Handling Tug

General


Classification : ABS
Year Built 2011
Bollard Pull (Ahead) : 65 Tons
Working Speed : 12 Knots
Gross / Net Tonnage : 883 GT ITC / 265 NT ITC

General
Length overall (LOA) : 45 Meters (147.63 Feet)
Breadth Molded : 12.6 Meters (41.33 Feet)
Depth Molded : 5.3 Meters (17.38 Feet)
Extreme Draft : 4.5 Meters (14.76 Feet)

Main Engines : Caterpillar D3516
Horsepower (Break) : 5150 BHP
Oil Dispersant Tank Capacity : 8.89 m3 (2351 US Gallons)
Generator :  3 x 245 KW, 415V/3ph/50Hz, Cummins@1,500 rpm
Emergency Generator : 1 x 80kW @ 415V/3ph/50Hz, Cummins
Fuel Capacity : 460 m3 (121,519 US Gallons)
Fuel Consumption : 2550 US Gallons/Day (Estimated)
Lube Oil Capacity : 8.9 m3 (2351 US Gallons)
Potable Water Capacity : 260 m3 (68,684 US Gallons)

Deck Strength : 5 Ton/m2
Towing Wires : 3280’ of 2”

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

------------------------------------------------------------------------------------------------
Search words (for official use only) :
Anchor Handling Tug for Sale
2011 Built Anchor Handling Tug
Anchor Handling Tug 45m for Sale
Used Anchor Handling Tug for Sale
45m
Anchor Handling Tug for Sale

-----------------------------------------------------------------------------------------------
Anchor Handling Tug 45m for Sale
Mitsubishi Industrial Generator Set for Sale -1991 Built
Used Propane Storage Tank - 1962 Built 18,000 gallon - for Sale
Accommodation Work Barge - For Sale
Worldoils Marketplace
Accommodation Work Barge - For Sale
Worldrigs ID: 2945
Accommodation Work Barge - For Sale
Accommodation Work Barge for Sale
2013 Built Accommodation Work Barge for Sale


Description :


Principal Particulars

MMSI No : 566,440,000
Class : Bureau Veritas (BV)
Notation :
+ Hull + Machinery + ALM + MODU 2009 Special Service AWB
Built : 2013
Length Overall : 82.296 m
Length B P : 82.296 m
Breadth Moulded : 21.945 m
Depth Moulded : 4.877 m
Draft (design) : 3.0 m
GRT / NRT : 3,362 T / 1,008 T
Deadweight : 3,105 Tonnes

Cargo Capacities

Clear Deck Area : 357.93 m2
Deck Strength : 10 MT/M2
Fuel Oil : 324.06 m3
Fresh Water : 536.85 m3
Water ballast : 3199.25 m3
Displacement : 5,331 tons

Power System

Main Generator :
04 x Cummins K19-DM, 400KW, 380V 3PH, 50 HZ, 760 MPS
Emergency Generator :
01 x Cummins NTA855-DM, 240KW, 380V, 3PH, 50 HZ, 475AMPS

Deck Equipment

Main Crane( IOE) :
01 x Pedestal mounted 250 Ton @ 14 m radius, 45 m boom length
API 2C spec, electro hydraulic
Auxiliary Crane (IOE) : 01 x Telescopic 10 Ton @ 10m radius on Aft Stbd
Mooring Winch :
8 points mooring, single drum 42mm x 800m c/w spooling
device, 30T x 15m/min, local and bridge control
Mooring Anchor : 08 x 4000 kgs Flipper Delta
Fairleads : 08 x Universal type [4 rollers]
Mooring Buoys : 08 x 1m Ø x 2m length Steel buoys
Anchor and Windlass :
01 x 117KN WL, stockless bower anchor x 3300 kgs,
cable chains 12 shots x 44 mm Ø U3
Aluminium Mini Tug :
7.6 x 2.9 x 1.2 m boat c/w 315 BHP Cummins engine, 1 MT
Bollard Pull
Portable Diving System :
02 x LARS c/w ridding winch
02 x 20ft Cntr c/w 60" Ø decompression chamber, 3 men air/mixed
gas dive panel, Underwater CCTV, WS with LP and HP compressor

Fire Fighting & Life Saving Equipment

Fire Pump : 01 x 100m3/h x 60m head, centrifugal,
Emergency Fire Pump : 01 x 50m3/h x 60m head, centrifugal,
COâ‚‚ Fire Extinguishing : Genset compartment
Fire detection & Alarm : E/room & common area
Life rafts : 04 x 25 men
Life Boat & : 02 x 50 men
Rescue Boat : 02 x 6 men
Search Lights :
03 x 1000 Watt
 01 x 2000 Watt
All other FFE/LSA as per SOLAS and MODU requirement

Accommodation
[Total 50 persons / 25 cabins]
3rd Deck :
Control room, Ballast and Anti Heeling Remote Control Panel,
Main Crane Hook Rest, Open Storage
2nd Deck :
14 x single berth cabin, Office with 4-9 work stations, Conference
room, Gym room
1st Deck :
04 x two berth & 07 x 4 berth cabins, clients dining room, officer
abd rating mess, gallery, cold room endurance for 45 days
provisions, recreation room with 60" LED TV and karaoke set
Main Deck :
Single bed hospital, pantry room, laundry room, safety induction room
for 20 men, prayer room, smoking CO2 and Emergency Gen. room.
Workshop Equip with lathe machine, drilling, grinder, cutting & welding set

Communication and Navigation Equipment

GMDSS Radio Console : A3
SSB radio : 01 x 6310 Sailor
Inmarsat C : 02 x C 6110 Sailor
Fleet Board Band : 01 x 150 Sailor (Chobam)
Marine Radar No.1 : 01 x JRC JMA-3334 [48nm]
Gyro-compass : 01 x Anschutz BST2201 c/w 2 Repeater
VHF Radio : 02 x 6222 DSC Sailor
Portable VHF Radios :
02 x SAILOR SP3520
12 x ICOM IC-M24
Portable VHF/FM Radios : 06 x GP328 Motorola
Navtex Receiver : 01 x NCR333 JRC (Raytheon)
Echo Sounder : 01 x 200 kHz & 50 kHz JRC
DGPS : 01 x SAAB R5 DGPS
SART : 01 x Sailor SART II
EPIRB : 01 x Sailor SE 406-II
Magnetic Compass : 01 x L & G MK2002S
Wind Sensor : 01 x L & G 2030 MK2 sch865
SSAS : 01 x SAILOR 6194 [add-on Kit]
Vessel also fitted with Zenitel PA talk back system & self-powered telephone

Miscellaneous

Oily Water Separator : 01 x 0.5m³/hr, 15 ppm
Fresh Water Maker : 01 x 12,000litre/day, PETSEA RO
Ballast Water Treatment : 01 x 300m³/hr , COSCO BOS300X1
Sewage Treatment Plant : 01 x 70 men, 5m³/day , HANSUN
Incinerator : 01 x 180,000kcal/hr, IMO sludge /solid waste
Air Compressor : 01 x 600 cfm @ 110 psi
Anti Heeling system :
01 x Tsurumi Pump 720m³/Hr, Automatic and manual control from
wheel house
Ballast / Bilge System :
02 x 200m³/hr, control system from wheel house & Engine Control
room Draft Measuring system
4 x draft Point with LCD layout at wheel house

Price & terms : Please enquire using the email form below

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


------------------------------------------------------------------------------------------------------------------------
Search words (for official use only) -
50 Pax Accommodation Work Barge for Sale
BV Classed Accommodation Work Barge for Sale
Accommodation Work Barge - 2013 Built for Sale
82m Length Accommodation Work Barge for Sale
Accommodation Crane Barge for Sale

-----------------------------------------------------------------------------------------------------------------------
Accommodation Work Barge - For Sale
Platform Supply Vessel - for Sale
Worldoils Marketplace
Platform Supply Vessel - for Sale
Worldrigs ID: 452
Platform Supply Vessel - for Sale

Platform Supply Vessel for sale
PSV For sale

Classification : ABS

Tonnage :
Gross tonnage : 700 tons
Net tonnage : 210 tons

Dimensions :
Length OA : 54.27 meters
Breadth moulded : 12.19 meters
Depth, moulded : 4.27 meters
Draft, summer : 3.63 meters

Deck Capacity :
Deck cargo : 600.0 tonnes
Deck area : 312.6 sqm (35.13 meters x 8.9 meters)

Tank Capacities :
Dry bulk : 113.20 cbm (4 tanks x 28.3 cbm)
Fresh/drill water : 524.80 cbm
Fuel oil : 252.10 cbm
Liquid mud : 181.60 cbm ( 4 tanks x 45.4 cbm)

Propulsion/Positioning :
Main engines :
2 x Cat D399
HP - 2,679 kW-1,998
Fuel type : Marine Diesel
Bow thruster : 1 x 300hp, Cat 3406

Generators :
Diesel generators : 2 x 210 kW, Cat 3406
Voltage : 440V, 60Hz

Accommodation :
Total berths : 18
3 x 1 person cabins
4 x 2 person cabins
1 x 3 person cabins
1 x 4 person cabins

Communication Equipment :
Radio station :
(1) MF/HF Radiotelephone SEA 330
(1) MF/HF Radio Telex SEA 330
Telex : (1) SEA SAT 3
VHF :
(2) VHF SEA 7156
(2) VHF DSC SEA 7157
Portable VHF : (2) VHF Survival Craft sr-103
SART : (1) SimraD SA 50
EPIRB : (1) ACR 406

Navigation Equipment :
Radars :
One Furuno 1930
One Furuno 1941
Satellite navigator : (1) Furuno Navgator
Navtex receiver : (1) JRC NCR - 300A
AIS : (1) JHS 182
 

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------------------------------
Search words(for official use only) - 
Platform Supply Vessel for sale
PSV for Sale in Dubai, Bahrain, Qatar, Kuwait, Middle East
PSV for sale in Asia, Singapore, Malaysia, Indonesia
-----------------------------------------------------------------------------------------------------------------------------
Platform Supply Vessel - for Sale
Caterpillar G3520C Generators for Sale - New
Crew Supply Vessel for Sale
Worldoils Marketplace
Crew Supply Vessel for Sale
Worldrigs ID: 2510
Crew Supply Vessel for Sale
Crew Supply Vessel for Sale
Crew Supply Vessel - 1998 Built for Sale


Description :

General :
   
Built : 1998
Class : DNV 1A1 HSLC R3, Cargo and Crew
 
Main Dimensions :

Length Overall : 23.80 m
Beam Moulded : 6.20 m
Depth Moulded : 3.00 m
Draft (Max) : 1.0 m 
Free Deck Space : 44.00 m2
 
Tonnage :

GRT : 98.63 tons
NRT : 23.79 tons
Deck Cargo : 17 tons 
 
Machinery :

Main Engines : 3 x Scania DSI 14
Break Horsepower : 2,025BHP @ 2,100 RPM
Generators : 1 x Perkins 4.236 30 kW 
Propulsion : 3 x Kamewa water jets
 
Speed & Consumption :

Max Speed : 14 knots
Generator Only : 6 Ltrs/hr 144 Ltrs/ day 
Idle speed with ME's : 65/hr 1560 Ltrs/ day
With full speed : 1700 RPM 220Ltrs/hr 5280 Ltrs/ day
Endurance : 1.51/ Day
 
Tank Capacities :

Marine Gas Oil : 1760 IG
Potable Water : 2 M/T 
 
Radio & Navigation Equipment :

Radars : 1 x Koden MDC 721
VHF : 1 x Sailor RT 2048
SSB : 1 x Sailor RE 2100
Compass : Plastimo BV 0062
GPS : JMC GP - 200
DSC Receiver : 1 x Sailor RT 4822 
GMDSS Radios : 3X ACR  
Navtex : N/A 
Depth Sounder : N/A 
AIS : 1x Nauticast
 
Fifi System :

Fire pumps : Clutch operated fire pumps
                       fitted on generator
Fire Extinguisher : Various
 
Accommodation :

Crew Berths : 4
Seating Arrangement : 24

Safety Equipment :

Life Rafts : 2x25 persons –Chinese     
 
Miscellaneous :

Electrically operated Anchor windlass/Capstan
3 X split air conditioning systems
Electric galley
2 X Remote operated search lights

Location : UAE

Price & terms : Please enquire using the email form below.

If you cannot find the vessel, crane, rig or equipment that you need,
please send us anemail to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------
Search Words (for official use only) :
1998 Built Crew Supply Vessel for Sale
DNV Classed Crew Supply Vessel for Sale
2,025bhp Supply Vessel for Sale
Used Crew Supply Vessel for Sale
Supply Vessel for Sale

---------------------------------------------------------------------------------------------------
Crew Supply Vessel for Sale
1983 Built Offshore Supply Vessel for Sale
Worldoils Marketplace
1983 Built Offshore Supply Vessel for Sale
Worldrigs ID: 2808
1983 Built Offshore Supply Vessel for Sale
Offshore Supply Vessel - 166FT - for Sale
OSV for Sale

Description :


General

Built : 1983
Class : Load line only
USCG : Yes

Particulars

Length Overall : 166 ft
Width (beam) : 36.1 ft
Hull Depth : 12 ft
Max Draft : 11 Ft.
Clear Deck Space : 108.8 x 26.6 = 2875 Sq. Ft

Cargo Deck

Net Tonnage : 113 tons
Gross Tonnage : 167 tons
Deck Tonnage : 450 with no below deck cargo
D.P. : none

Machinery

Main Engines : (2) GM 16V149 na
Total Horsepower : 2000 hp
Main Gear Boxes : Twin disc MG 540
Gear Ratio : 6.18 to 1

Bow Thrusters
:
GM 6-71 na
Total horse power:  2000 hp

Stern Thrusters : None
Generators : (2) GM 6-71 na 99 kw
Propellers : 74 x 64 outboard turning

Capacities
(Can only carry 85% of fuel and mud safely)
Fuel Day Tanks
Fuel : 37,000 usg
Vessel Potable Water : 4,452 usg
Rig or Potable Water : 84,000 usg
Liquid Mud : 1200 bbls
Bulk Tanks : 4 x 750 cf = 3000 cf
Methanol : None

Pumps

Fuel : 250 gpm @ 160 Ft.
Rig or Potable Water : 30 gpm @ 140 Ft., Aurora 3x4x9a
Liquid Mud : 750 gpm @ 175 Ft.
Bulk Tanks : 40 psi, pumps one tank 750cf
Fire Monitor : 1000 GPM

Anchors

# Of Anchors : Two
Shots of Chain Port : 9 shots
Shots of Chain Strbd : 6 shots

Performance

Max. Speed : 11 knots
Fuel Consumption : 115 gal/hr max

Accommodations

Certified to carry : 17
Berths (bunks) : 17
Passengers : 13
Crew : 4
Walk in Cooler : Yes
Walk in Freezer : None
Air Conditioner : Central
Heating : Central
Torch : None
Welding Machine : None
Satellite TV : None

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
1983 Built Offshore Supply Vessel for Sale
Used Offshore Supply Vessel for Sale
166ft OSV for sale
Offshore Supply Vessel for Sale
Offshore Supply Vessel - 1983 Built - For Sale

-------------------------------------------------------------------------------------------------------
1983 Built Offshore Supply Vessel for Sale
Sonic SDC500-29P Drilling Rig - For Sale
Worldoils Marketplace
Sonic SDC500-29P Drilling Rig - For Sale
Worldrigs ID: 2685
Sonic SDC500-29P Drilling Rig - For Sale
Sonic SDC500-29P Drilling Rig for Sale
Used Sonic SDC500-29P Drilling Rig for Sale

Model : SDC500-29P Drill Rig
Manufacturer : Sonic
Condition : Used

Description :

Sonic SDC500-29P Drill Rig
80k Diedrich head
28ft stroke, 37ft 8" overall
24k pullback 16k pull down
12k 5/8" x 222ft nonrotating winch
4"-13" nominal clamping break out table
Hydrostatic circuit 4500PSI
pilot control
micro feed
float
high/low feed
120gal hydraulic tank
Mounted on a 2004 International 7600 6x4 Truck
Cummins ISM 320V upgraded ECM - rated 385hp
A45/1450 ft torque
Eaton Fuller 13 speed transmission
Hendrickson 38k rear axles
11R22.5 tires
FMC bean pump
3L6 Moyno
Head #A0012 Rebuilt 7/16/10, 9/30/12, 7/23/18 (upgraded roller bearings)
Rebuilt Transmission 8/19/17
Rebuilt winch 8/23/17
Odometer 104,651 miles / 9,374 Hours

Location : USA

Price & terms : Please enquire using the email form below.       

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
Drilling Rig - Sonic SDC500-29P - For Sale
Sonic SDC500-29P Used Drilling Rig for Sale
Used Sonic SDC500-29P Drilling Rig for Sale
Sonic Drilling Rig for Sale in USA
Used Sonic Land Drilling Rig for Sale in USA

-------------------------------------------------------------------------------------------------------
Sonic SDC500-29P Drilling Rig - For Sale
Used Propane Storage Tank - 1955 Built 7,500 Gallon - for Sale
Brand New Massenza Hydraulic Drilling Rig Model Mi5 Mounted On Tracks (Crawler)
Worldoils Marketplace
Brand New Massenza Hydraulic Drilling Rig Model Mi5 Mounted On Tracks (Crawler)
Worldrigs ID: 2977
Brand New Massenza Hydraulic Drilling Rig Model Mi5 Mounted On Tracks (Crawler)
Brand New Massenza Hydraulic Drilling Rig Model Mi5 for Sale
Drilling Rig - Massenza Hydraulic - For Sale


Description :


Used for water well research, geological findings, mineral research
and geothermal applications.

Work Methods:

Rotary drilling with direct circulation by Water, Mud, Air or Foam
Down the Hole Hammer Drilling
Auger Drilling
Core Drilling

Main Framework:

Made out of electrically welded high quality steel S 355 JR.
N°4 hydraulic stabilizers of which two are fixed and the other
two can be manually widened for the levelling and positioning
of rig, complete with check valve.

Control Panel:

Fixed control panel, complete with valves, distributors, pressure
gauges, reading gauges for pull-up, pressure thrust on drill battery,
balancing system, diesel engine control.

Diesel Fuel Tank:
capacity 30,4 US Gallon.

Maximum Drilling Depth with mud pumps is :
210 mts (690 ft).

Price & terms : Please enquire using the email form below.        

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.


---------------------------------------------------------------------------------------------------------
Search words (for official use only) :
New Massenza Hydraulic Drilling Rig for Sale
Massenza Hydraulic Drilling Rig Model Mi5 Mounted On Tracks for Sale
Brand New Massenza Hydraulic Drilling Rig
Mounted On Tracks
for Sale
New Massenza Hydraulic Crawler Drilling Rig for Sale
Brand New Massenza Hydraulic Crawler Drilling Rig Model Mi5 for Sale

-------------------------------------------------------------------------------------------------------
Brand New Massenza Hydraulic Drilling Rig Model Mi5 Mounted On Tracks (Crawler)
Quick Build Houses for sale
Worldoils Marketplace
Quick Build Houses for sale
Worldrigs ID: 458
Quick Build Houses for sale

Quick Build Houses for sale
Mobile Homes for North Dakota
Steel Houses for Sale

The advantages of the steel houses

Heat and water insulated
The houses are insulated very well for heat and water. Polyurethane is being used for the
walls, the density is 40 kg/m3 and the thickness is 40 mm. Polyurethane is one of the
best insulation material.

The windows are double glass (4+12+4).

The house will be very comfortable in hot summers and in cold winters. You will save
energy for heating and cooling

Easy and quick assembly
The houses can be assembled very fast and easily with 4 persons. For example 46 m2
house can be assembled in 2 days. So you will save time and it will be finished very fast.
The assemble documents are being sent with the products. All parts are numbered and
shown with drawings.

No need of a crane
Finding a crane is problem in some places. So hand tools, ladders will be enough to
assemble our houses.

Long life
Because of the materials that we use, the house will be used for many years without any
problems.

Good looking
The house will look elegant and nice.

Easy transportation
The houses will be packed for the international transportation. The houses will be
shipped by vessel or by truck/lorry. We use 40ft shipping containers for shipping.
2 persons can carry the packages without any help.

Safe for Earth Quake
The structure is steel and you will be safe for earth quakes.

Durable
All construction and frames are steel, so it is very strong and durable

Technical Specifications
Foundation : 20 cm thickness of C25 concrete on site (done by the customer)
Roof Trusses : Painted 1.5mm and 2mm thickness steel profiles for maximum protection of rust.
Roof Covering : Corrugated (trapezoidal) painted galvanized sheet metal 0.5mm thickness.
Ceiling Insulation : 80mm thickness of glass wool sheets .
Ceiling : 12.5mm thickness film coated gypsumboard. The height of the ceiling from the floor is 2.5m.
Columns : 3mm thick 100mmx100mm steel profiles, undercoat and painted for maximum protection of rust.
Floor : Floor surface will be installed by the customer.
Floor ceramic tiles and laminated floorings will be supplied upon request.
Wall Panels : 40mm polyurethane sandwich panels, density is 40 kg/m3
Outer surface : 0.5mm RAL 9002 polyester dyed galvanized sheet metal
Inner surface : 0.4mm RAL 9002 polyester dyed galvanized sheet metal
Inner surface of the walls are covered with gypsum board.

Price & terms : Please enquire using the email form below. 

If you cannot find the vessel, crane, rig or equipment that you need,
please send us an email to mail@worldoils.com stating your
requirements and we shall find it for you.

We can arrange delivery of equipment and towage of rigs and vessels where needed.

The details mentioned above are believed to be accurate but are not guaranteed.

----------------------------------------------------------------------------------------------------------------------
Search words - For official use only 
Quick Build Houses for sale
Quick Houses for Middle East
Steel Houses for Libya
Mobile Homes for North Dakota
Quick Build Steel Homes
Fast Steel Houses
Fast Build Steel Houses
-----------------------------------------------------------------------------------------------------------------------
Quick Build Houses for sale
Nano Powder Production Machine for Sale
Worldoils Marketplace
Nano Powder Production Machine for Sale
Worldrigs ID: 2030
Nano Powder Production Machine for Sale
Nano Powder Production Machine for Sale
Nano Grinding Machine


This Nano Machine has been developed from years of research and optimisation
to ensure the final product is a class above the current Nano technology options
available worldwide. It has the following capabilities and notable features.

Capabilities

- Ideal for: grinding dry, brittle samples & mechanical alloying
- Typical samples include: Chemicals, Rocks, Minerals, Ceramics, Sand, Cement,
Slag, Glass, Pharmaceuticals, Seeds, Paints, Inks etc.

Notable Features

- Able to produce one kilogram of Nano powder per day
- Has two operational modes – subsonic (mechanical crushing) and supersonic
(adds sound pressure)
- Can Nano-particulate any sample down to 10nm in a few hours
- Proven and tested rugged design
- Easy maintenance and easy to use - Affordable

Machine Applications

- Defence-Space: Various stealth anti-radar nano-coatings and paints can be produced
- Defence-Textiles: Infrared thermal textiles can be produced with functional nano-particles
- Defence-Explosives: Solid ingredients of the explosives can be nano-powdered to reach
maximum effectiveness
- Motor Oils: Magnetic Nano-particles stick to the steel engine parts very well, and can be
volume produced
- Agriculture: Nano-additives (generally Fe, Zn, Cu, Mn) are already in use. 0.5kg of
Nano-fertilizer is enough for an acre of crops.
- Artificial Rain: Silver Iodure (AgI2) is already in use with micro powder level. Much more
efficient nano rain stimulants can be done with the use of our instrument
- Combustion of Coal: Combustion additives can be prepared to increase the efficiency
of the coal
- Nano Cement: Our instrument has produced various kinds of nano-cement for various
projects
- Cosmetics: Nano-cosmetic hair product developed from this machine is the most superior
product in the world
- Nano-Floatation: Secondary step of nano-floatation is necessary and crucial which will
bring the purity up to 90%

Machine Size

The machine is also compact and relatively lightweight in comparison to its
capabilities, with dimensions of (60x65x80)cm and weight of 50 kilograms.

Price & terms : Please enquire using the email form below.

We can arrange demonstrations and documentation when required at later stages.

The details mentioned above are believed to be accurate but are not guaranteed.

--------------------------------------------------
Search words (for official use only) -
Nano Powder Production Machine
Nano Making Machine for Sale
Nano Grinding Machine
Nano Machine for Sale
Nano Powder Making Machine

------------------------------------------------
Nano Powder Production Machine for Sale
Worldoils Brokering & Services - Land Rig Brokers, Offshore Rig Brokers
Land Rig Oil Rigs : Land Rigs
Barge Rigs Oil Rigs : Barge Rigs
Semi Submersible Rig Semi Sub Rigs
Jackup Rigs Oil Rigs : Jackup Rigs
Marketplace Oil & Gas Marketplace
Oilfield Camps Oilfield Camps